diff options
| author | Stefan Sperling <stsp@cvs.openbsd.org> | 2015-03-02 15:05:12 +0000 |
|---|---|---|
| committer | Stefan Sperling <stsp@cvs.openbsd.org> | 2015-03-02 15:05:12 +0000 |
| commit | 8a04477f46e2a054483dfa73a76e8d95fe3110fc (patch) | |
| tree | 5d6ae37047d64bd85b7eac3a49ac111bb0fda213 /sys/dev/usb/if_athn_usb.c | |
| parent | 373d796d957480b4e429aa94a992f793197346d4 (diff) | |
Fix re-associations with athn(4) USB devices in station mode.
Sending the firmware a NODE_ADD command for our BSS doesn't seem to have the
desired effect in station mode. It made a new association after ifconfig
down/up impossible until the device was re-plugged. Leave the code in place
but limit it to hostap mode, just in case it is needed there (hard to tell
since hostap mode seems to be broken -- no beacons are sent by the device).
Also, when leaving run state, reset the RX filer to allow all beacons again.
ok mpi@
Diffstat (limited to 'sys/dev/usb/if_athn_usb.c')
| -rw-r--r-- | sys/dev/usb/if_athn_usb.c | 29 |
1 files changed, 23 insertions, 6 deletions
diff --git a/sys/dev/usb/if_athn_usb.c b/sys/dev/usb/if_athn_usb.c index 20a58e10ab9..cd55b8cfde5 100644 --- a/sys/dev/usb/if_athn_usb.c +++ b/sys/dev/usb/if_athn_usb.c @@ -1,4 +1,4 @@ -/* $OpenBSD: if_athn_usb.c,v 1.30 2015/03/02 14:46:02 stsp Exp $ */ +/* $OpenBSD: if_athn_usb.c,v 1.31 2015/03/02 15:05:11 stsp Exp $ */ /*- * Copyright (c) 2011 Damien Bergamini <damien.bergamini@free.fr> @@ -1042,7 +1042,9 @@ athn_usb_newstate_cb(struct athn_usb_softc *usc, void *arg) struct ieee80211com *ic = &sc->sc_ic; enum ieee80211_state ostate; uint32_t reg, imask; +#ifndef IEEE80211_STA_ONLY uint8_t sta_index; +#endif int s, error; timeout_del(&sc->calib_to); @@ -1052,9 +1054,19 @@ athn_usb_newstate_cb(struct athn_usb_softc *usc, void *arg) DPRINTF(("newstate %d -> %d\n", ostate, cmd->state)); if (ostate == IEEE80211_S_RUN) { - sta_index = ((struct athn_node *)ic->ic_bss)->sta_index; - (void)athn_usb_wmi_xcmd(usc, AR_WMI_CMD_NODE_REMOVE, - &sta_index, sizeof(sta_index), NULL); +#ifndef IEEE80211_STA_ONLY + if (ic->ic_opmode == IEEE80211_M_HOSTAP) { + /* XXX really needed? */ + sta_index = ((struct athn_node *)ic->ic_bss)->sta_index; + (void)athn_usb_wmi_xcmd(usc, AR_WMI_CMD_NODE_REMOVE, + &sta_index, sizeof(sta_index), NULL); + } +#endif + reg = AR_READ(sc, AR_RX_FILTER); + reg = (reg & ~AR_RX_FILTER_MYBEACON) | + AR_RX_FILTER_BEACON; + AR_WRITE(sc, AR_RX_FILTER, reg); + AR_WRITE_BARRIER(sc); } switch (cmd->state) { case IEEE80211_S_INIT: @@ -1079,8 +1091,13 @@ athn_usb_newstate_cb(struct athn_usb_softc *usc, void *arg) if (ic->ic_opmode == IEEE80211_M_MONITOR) break; - /* Create node entry for our BSS. */ - error = athn_usb_create_node(usc, ic->ic_bss); +#ifndef IEEE80211_STA_ONLY + if (ic->ic_opmode == IEEE80211_M_HOSTAP) { + /* Create node entry for our BSS */ + /* XXX really needed? breaks station mode on down/up */ + error = athn_usb_create_node(usc, ic->ic_bss); + } +#endif athn_set_bss(sc, ic->ic_bss); athn_usb_wmi_cmd(usc, AR_WMI_CMD_DISABLE_INTR); |