Driver for Sundance ST201 Ethernet; from FreeBSD.

3 files changed, 2112 insertions, 1 deletions

diff --git a/sys/dev/pci/files.pci b/sys/dev/pci/files.pci
index 7f7930d2200..4aa89553954 100644
--- a/sys/dev/pci/files.pci
+++ b/sys/dev/pci/files.pci
@@ -1,4 +1,4 @@
-#	$OpenBSD: files.pci,v 1.57 1999/12/04 20:27:37 aaron Exp $
+#	$OpenBSD: files.pci,v 1.58 1999/12/07 01:45:29 aaron Exp $
 #	$NetBSD: files.pci,v 1.20 1996/09/24 17:47:15 christos Exp $
 #
 # Config file and device description for machine-independent PCI code.
@@ -208,6 +208,11 @@ device	sis: ether, ifnet, mii, ifmedia
 attach	sis at pci
 file	dev/pci/if_sis.c		sis
 
+# Sundance ST201 ethernet
+device	ste: ether, ifnet, mii, ifmedia
+attach	ste at pci
+file	dev/pci/if_ste.c		ste
+
 # Industrial Computer Source WDT-50x
 device	wdt: pcibus
 attach	wdt at pci
diff --git a/sys/dev/pci/if_ste.c b/sys/dev/pci/if_ste.c
new file mode 100644
index 00000000000..fb7090fc6cb
--- /dev/null
+++ b/sys/dev/pci/if_ste.c
@@ -0,0 +1,1573 @@
+/*	$OpenBSD: if_ste.c,v 1.1 1999/12/07 01:45:29 aaron Exp $ */
+/*
+ * Copyright (c) 1997, 1998, 1999
+ *	Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed by Bill Paul.
+ * 4. Neither the name of the author nor the names of any co-contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $FreeBSD: src/sys/pci/if_ste.c,v 1.12 1999/09/22 06:08:11 wpaul Exp $
+ */
+
+#include "bpfilter.h"
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/mbuf.h>
+#include <sys/protosw.h>
+#include <sys/socket.h>
+#include <sys/ioctl.h>
+#include <sys/errno.h>
+#include <sys/malloc.h>
+#include <sys/kernel.h>
+
+#include <net/if.h>
+#include <net/if_dl.h>
+#include <net/if_types.h>
+
+#ifdef INET
+#include <netinet/in.h>
+#include <netinet/in_systm.h>
+#include <netinet/in_var.h>
+#include <netinet/ip.h>
+#include <netinet/if_ether.h>
+#endif
+
+#include <net/if_media.h>
+
+#if NBPFILTER > 0
+#include <net/bpf.h>
+#endif
+
+#if 0
+#ifdef BRIDGE
+#include <net/bridge.h>
+#endif
+#endif
+
+#include <vm/vm.h>              /* for vtophys */
+#include <vm/pmap.h>            /* for vtophys */
+
+#include <sys/device.h>
+
+#include <dev/mii/mii.h>
+#include <dev/mii/miivar.h>
+
+#include <dev/pci/pcireg.h>
+#include <dev/pci/pcivar.h>
+#include <dev/pci/pcidevs.h>
+
+#define STE_USEIOSPACE
+
+#include <dev/pci/if_stereg.h>
+
+int ste_probe		__P((struct device *, void *, void *));
+void ste_attach		__P((struct device *, struct device *, void *));
+int ste_intr		__P((void *));
+void ste_shutdown	__P((void *));
+void ste_init		__P((void *));
+void ste_rxeof		__P((struct ste_softc *));
+void ste_txeoc		__P((struct ste_softc *));
+void ste_txeof		__P((struct ste_softc *));
+void ste_stats_update	__P((void *));
+void ste_stop		__P((struct ste_softc *));
+void ste_reset		__P((struct ste_softc *));
+int ste_ioctl		__P((struct ifnet *, u_long, caddr_t));
+int ste_encap		__P((struct ste_softc *, struct ste_chain *,
+					struct mbuf *));
+void ste_start		__P((struct ifnet *));
+void ste_watchdog	__P((struct ifnet *));
+int ste_newbuf		__P((struct ste_softc *,
+					struct ste_chain_onefrag *,
+					struct mbuf *));
+int ste_ifmedia_upd	__P((struct ifnet *));
+void ste_ifmedia_sts	__P((struct ifnet *, struct ifmediareq *));
+
+void ste_mii_sync	__P((struct ste_softc *));
+void ste_mii_send	__P((struct ste_softc *, u_int32_t, int));
+int ste_mii_readreg	__P((struct ste_softc *,
+					struct ste_mii_frame *));
+int ste_mii_writereg	__P((struct ste_softc *,
+					struct ste_mii_frame *));
+int ste_miibus_readreg	__P((struct device *, int, int));
+void ste_miibus_writereg	__P((struct device *, int, int, int));
+void ste_miibus_statchg	__P((struct device *));
+
+int ste_eeprom_wait	__P((struct ste_softc *));
+int ste_read_eeprom	__P((struct ste_softc *, caddr_t, int,
+							int, int));
+void ste_wait		__P((struct ste_softc *));
+u_int8_t ste_calchash	__P((caddr_t));
+void ste_setmulti	__P((struct ste_softc *));
+int ste_init_rx_list	__P((struct ste_softc *));
+void ste_init_tx_list	__P((struct ste_softc *));
+
+#ifdef STE_USEIOSPACE
+#define STE_RES			SYS_RES_IOPORT
+#define STE_RID			STE_PCI_LOIO
+#else
+#define STE_RES			SYS_RES_MEMORY
+#define STE_RID			STE_PCI_LOMEM
+#endif
+
+#define STE_SETBIT4(sc, reg, x)				\
+	CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) | x)
+
+#define STE_CLRBIT4(sc, reg, x)				\
+	CSR_WRITE_4(sc, reg, CSR_READ_4(sc, reg) & ~x)
+
+#define STE_SETBIT2(sc, reg, x)				\
+	CSR_WRITE_2(sc, reg, CSR_READ_2(sc, reg) | x)
+
+#define STE_CLRBIT2(sc, reg, x)				\
+	CSR_WRITE_2(sc, reg, CSR_READ_2(sc, reg) & ~x)
+
+#define STE_SETBIT1(sc, reg, x)				\
+	CSR_WRITE_1(sc, reg, CSR_READ_1(sc, reg) | x)
+
+#define STE_CLRBIT1(sc, reg, x)				\
+	CSR_WRITE_1(sc, reg, CSR_READ_1(sc, reg) & ~x)
+
+
+#define MII_SET(x)		STE_SETBIT1(sc, STE_PHYCTL, x)
+#define MII_CLR(x)		STE_CLRBIT1(sc, STE_PHYCTL, x) 
+
+/*
+ * Sync the PHYs by setting data bit and strobing the clock 32 times.
+ */
+void ste_mii_sync(sc)
+	struct ste_softc		*sc;
+{
+	register int		i;
+
+	MII_SET(STE_PHYCTL_MDIR|STE_PHYCTL_MDATA);
+
+	for (i = 0; i < 32; i++) {
+		MII_SET(STE_PHYCTL_MCLK);
+		DELAY(1);
+		MII_CLR(STE_PHYCTL_MCLK);
+		DELAY(1);
+	}
+
+	return;
+}
+
+/*
+ * Clock a series of bits through the MII.
+ */
+void ste_mii_send(sc, bits, cnt)
+	struct ste_softc		*sc;
+	u_int32_t		bits;
+	int			cnt;
+{
+	int			i;
+
+	MII_CLR(STE_PHYCTL_MCLK);
+
+	for (i = (0x1 << (cnt - 1)); i; i >>= 1) {
+                if (bits & i) {
+			MII_SET(STE_PHYCTL_MDATA);
+                } else {
+			MII_CLR(STE_PHYCTL_MDATA);
+                }
+		DELAY(1);
+		MII_CLR(STE_PHYCTL_MCLK);
+		DELAY(1);
+		MII_SET(STE_PHYCTL_MCLK);
+	}
+}
+
+/*
+ * Read an PHY register through the MII.
+ */
+int ste_mii_readreg(sc, frame)
+	struct ste_softc		*sc;
+	struct ste_mii_frame	*frame;
+	
+{
+	int			i, ack, s;
+
+	s = splimp();
+
+	/*
+	 * Set up frame for RX.
+	 */
+	frame->mii_stdelim = STE_MII_STARTDELIM;
+	frame->mii_opcode = STE_MII_READOP;
+	frame->mii_turnaround = 0;
+	frame->mii_data = 0;
+	
+	CSR_WRITE_2(sc, STE_PHYCTL, 0);
+	/*
+ 	 * Turn on data xmit.
+	 */
+	MII_SET(STE_PHYCTL_MDIR);
+
+	ste_mii_sync(sc);
+
+	/*
+	 * Send command/address info.
+	 */
+	ste_mii_send(sc, frame->mii_stdelim, 2);
+	ste_mii_send(sc, frame->mii_opcode, 2);
+	ste_mii_send(sc, frame->mii_phyaddr, 5);
+	ste_mii_send(sc, frame->mii_regaddr, 5);
+
+	/* Turn off xmit. */
+	MII_CLR(STE_PHYCTL_MDIR);
+
+	/* Idle bit */
+	MII_CLR((STE_PHYCTL_MCLK|STE_PHYCTL_MDATA));
+	DELAY(1);
+	MII_SET(STE_PHYCTL_MCLK);
+	DELAY(1);
+
+	/* Check for ack */
+	MII_CLR(STE_PHYCTL_MCLK);
+	DELAY(1);
+	MII_SET(STE_PHYCTL_MCLK);
+	DELAY(1);
+	ack = CSR_READ_2(sc, STE_PHYCTL) & STE_PHYCTL_MDATA;
+
+	/*
+	 * Now try reading data bits. If the ack failed, we still
+	 * need to clock through 16 cycles to keep the PHY(s) in sync.
+	 */
+	if (ack) {
+		for(i = 0; i < 16; i++) {
+			MII_CLR(STE_PHYCTL_MCLK);
+			DELAY(1);
+			MII_SET(STE_PHYCTL_MCLK);
+			DELAY(1);
+		}
+		goto fail;
+	}
+
+	for (i = 0x8000; i; i >>= 1) {
+		MII_CLR(STE_PHYCTL_MCLK);
+		DELAY(1);
+		if (!ack) {
+			if (CSR_READ_2(sc, STE_PHYCTL) & STE_PHYCTL_MDATA)
+				frame->mii_data |= i;
+			DELAY(1);
+		}
+		MII_SET(STE_PHYCTL_MCLK);
+		DELAY(1);
+	}
+
+fail:
+
+	MII_CLR(STE_PHYCTL_MCLK);
+	DELAY(1);
+	MII_SET(STE_PHYCTL_MCLK);
+	DELAY(1);
+
+	splx(s);
+
+	if (ack)
+		return(1);
+	return(0);
+}
+
+/*
+ * Write to a PHY register through the MII.
+ */
+int ste_mii_writereg(sc, frame)
+	struct ste_softc		*sc;
+	struct ste_mii_frame	*frame;
+	
+{
+	int			s;
+
+	s = splimp();
+	/*
+	 * Set up frame for TX.
+	 */
+
+	frame->mii_stdelim = STE_MII_STARTDELIM;
+	frame->mii_opcode = STE_MII_WRITEOP;
+	frame->mii_turnaround = STE_MII_TURNAROUND;
+	
+	/*
+ 	 * Turn on data output.
+	 */
+	MII_SET(STE_PHYCTL_MDIR);
+
+	ste_mii_sync(sc);
+
+	ste_mii_send(sc, frame->mii_stdelim, 2);
+	ste_mii_send(sc, frame->mii_opcode, 2);
+	ste_mii_send(sc, frame->mii_phyaddr, 5);
+	ste_mii_send(sc, frame->mii_regaddr, 5);
+	ste_mii_send(sc, frame->mii_turnaround, 2);
+	ste_mii_send(sc, frame->mii_data, 16);
+
+	/* Idle bit. */
+	MII_SET(STE_PHYCTL_MCLK);
+	DELAY(1);
+	MII_CLR(STE_PHYCTL_MCLK);
+	DELAY(1);
+
+	/*
+	 * Turn off xmit.
+	 */
+	MII_CLR(STE_PHYCTL_MDIR);
+
+	splx(s);
+
+	return(0);
+}
+
+int ste_miibus_readreg(self, phy, reg)
+	struct device		*self;
+	int			phy, reg;
+{
+	struct ste_softc	*sc = (struct ste_softc *)self;
+	struct ste_mii_frame	frame;
+
+	bzero((char *)&frame, sizeof(frame));
+
+	frame.mii_phyaddr = phy;
+	frame.mii_regaddr = reg;
+	ste_mii_readreg(sc, &frame);
+
+	return(frame.mii_data);
+}
+
+void ste_miibus_writereg(self, phy, reg, data)
+	struct device		*self;
+	int			phy, reg, data;
+{
+	struct ste_softc	*sc = (struct ste_softc *)self;
+	struct ste_mii_frame	frame;
+
+	bzero((char *)&frame, sizeof(frame));
+
+	frame.mii_phyaddr = phy;
+	frame.mii_regaddr = reg;
+	frame.mii_data = data;
+
+	ste_mii_writereg(sc, &frame);
+
+	return;
+}
+
+void ste_miibus_statchg(self)
+	struct device		*self;
+{
+	struct ste_softc	*sc = (struct ste_softc *)self;
+	struct mii_data		*mii;
+
+	mii = &sc->sc_mii;
+
+	if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX) {
+		STE_SETBIT2(sc, STE_MACCTL0, STE_MACCTL0_FULLDUPLEX);
+	} else {
+		STE_CLRBIT2(sc, STE_MACCTL0, STE_MACCTL0_FULLDUPLEX);
+	}
+
+	return;
+}
+ 
+int ste_ifmedia_upd(ifp)
+	struct ifnet		*ifp;
+{
+	struct ste_softc	*sc;
+	struct mii_data		*mii;
+
+	sc = ifp->if_softc;
+	mii = &sc->sc_mii;
+	mii_mediachg(mii);
+
+	return(0);
+}
+
+void ste_ifmedia_sts(ifp, ifmr)
+	struct ifnet		*ifp;
+	struct ifmediareq	*ifmr;
+{
+	struct ste_softc	*sc;
+	struct mii_data		*mii;
+
+	sc = ifp->if_softc;
+	mii = &sc->sc_mii;
+
+	mii_pollstat(mii);
+	ifmr->ifm_active = mii->mii_media_active;
+	ifmr->ifm_status = mii->mii_media_status;
+
+	return;
+}
+
+void ste_wait(sc)
+	struct ste_softc		*sc;
+{
+	register int		i;
+
+	for (i = 0; i < STE_TIMEOUT; i++) {
+		if (!(CSR_READ_4(sc, STE_DMACTL) & STE_DMACTL_DMA_HALTINPROG))
+			break;
+	}
+
+	if (i == STE_TIMEOUT)
+		printf("ste%d: command never completed!\n", sc->ste_unit);
+
+	return;
+}
+
+/*
+ * The EEPROM is slow: give it time to come ready after issuing
+ * it a command.
+ */
+int ste_eeprom_wait(sc)
+	struct ste_softc		*sc;
+{
+	int			i;
+
+	DELAY(1000);
+
+	for (i = 0; i < 100; i++) {
+		if (CSR_READ_2(sc, STE_EEPROM_CTL) & STE_EECTL_BUSY)
+			DELAY(1000);
+		else
+			break;
+	}
+
+	if (i == 100) {
+		printf("ste%d: eeprom failed to come ready\n", sc->ste_unit);
+		return(1);
+	}
+
+	return(0);
+}
+
+/*
+ * Read a sequence of words from the EEPROM. Note that ethernet address
+ * data is stored in the EEPROM in network byte order.
+ */
+int ste_read_eeprom(sc, dest, off, cnt, swap)
+	struct ste_softc		*sc;
+	caddr_t			dest;
+	int			off;
+	int			cnt;
+	int			swap;
+{
+	int			err = 0, i;
+	u_int16_t		word = 0, *ptr;
+
+	if (ste_eeprom_wait(sc))
+		return(1);
+
+	for (i = 0; i < cnt; i++) {
+		CSR_WRITE_2(sc, STE_EEPROM_CTL, STE_EEOPCODE_READ | (off + i));
+		err = ste_eeprom_wait(sc);
+		if (err)
+			break;
+		word = CSR_READ_2(sc, STE_EEPROM_DATA);
+		ptr = (u_int16_t *)(dest + (i * 2));
+		if (swap)
+			*ptr = ntohs(word);
+		else
+			*ptr = word;	
+	}
+
+	return(err ? 1 : 0);
+}
+
+u_int8_t ste_calchash(addr)
+	caddr_t			addr;
+{
+
+	u_int32_t		crc, carry;
+	int			i, j;
+	u_int8_t		c;
+
+	/* Compute CRC for the address value. */
+	crc = 0xFFFFFFFF; /* initial value */
+
+	for (i = 0; i < 6; i++) {
+		c = *(addr + i);
+		for (j = 0; j < 8; j++) {
+			carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01);
+			crc <<= 1;
+			c >>= 1;
+			if (carry)
+				crc = (crc ^ 0x04c11db6) | carry;
+		}
+	}
+
+	/* return the filter bit position */
+	return(crc & 0x0000003F);
+}
+
+void ste_setmulti(sc)
+	struct ste_softc	*sc;
+{
+	struct ifnet		*ifp;
+	struct arpcom		*ac = &sc->arpcom;
+	struct ether_multi	*enm;
+	struct ether_multistep	step;
+	int			h = 0;
+	u_int32_t		hashes[2] = { 0, 0 };
+
+	ifp = &sc->arpcom.ac_if;
+	if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
+		STE_SETBIT1(sc, STE_RX_MODE, STE_RXMODE_ALLMULTI);
+		STE_CLRBIT1(sc, STE_RX_MODE, STE_RXMODE_MULTIHASH);
+		return;
+	}
+
+	/* first, zot all the existing hash bits */
+	CSR_WRITE_4(sc, STE_MAR0, 0);
+	CSR_WRITE_4(sc, STE_MAR1, 0);
+
+	/* now program new ones */
+	ETHER_FIRST_MULTI(step, ac, enm);
+	while (enm != NULL) {
+		h = ste_calchash(enm->enm_addrlo);
+		if (h < 32)
+			hashes[0] |= (1 << h);
+		else
+			hashes[1] |= (1 << (h - 32));
+		ETHER_NEXT_MULTI(step, enm);
+	}
+
+	CSR_WRITE_4(sc, STE_MAR0, hashes[0]);
+	CSR_WRITE_4(sc, STE_MAR1, hashes[1]);
+	STE_CLRBIT1(sc, STE_RX_MODE, STE_RXMODE_ALLMULTI);
+	STE_SETBIT1(sc, STE_RX_MODE, STE_RXMODE_MULTIHASH);
+
+	return;
+}
+
+int ste_intr(xsc)
+	void			*xsc;
+{
+	struct ste_softc	*sc;
+	struct ifnet		*ifp;
+	u_int16_t		status;
+	int			claimed = 0;
+
+	sc = xsc;
+	ifp = &sc->arpcom.ac_if;
+
+	/* See if this is really our interrupt. */
+	if (!(CSR_READ_2(sc, STE_ISR) & STE_ISR_INTLATCH))
+		return claimed;
+
+	for (;;) {
+		status = CSR_READ_2(sc, STE_ISR_ACK);
+
+		if (!(status & STE_INTRS))
+			break;
+
+		claimed = 1;
+
+		if (status & STE_ISR_RX_DMADONE)
+			ste_rxeof(sc);
+
+		if (status & STE_ISR_TX_DMADONE)
+			ste_txeof(sc);
+
+		if (status & STE_ISR_TX_DONE)
+			ste_txeoc(sc);
+
+		if (status & STE_ISR_STATS_OFLOW) {
+			untimeout(ste_stats_update, sc);
+			ste_stats_update(sc);
+		}
+
+		if (status & STE_ISR_HOSTERR) {
+			ste_reset(sc);
+			ste_init(sc);
+		}
+	}
+
+	/* Re-enable interrupts */
+	CSR_WRITE_2(sc, STE_IMR, STE_INTRS);
+
+	if (ifp->if_snd.ifq_head != NULL)
+		ste_start(ifp);
+
+	return claimed;
+}
+
+/*
+ * A frame has been uploaded: pass the resulting mbuf chain up to
+ * the higher level protocols.
+ */
+void ste_rxeof(sc)
+	struct ste_softc		*sc;
+{
+        struct ether_header	*eh;
+        struct mbuf		*m;
+        struct ifnet		*ifp;
+	struct ste_chain_onefrag	*cur_rx;
+	int			total_len = 0;
+	u_int32_t		rxstat;
+
+	ifp = &sc->arpcom.ac_if;
+
+again:
+
+	while((rxstat = sc->ste_cdata.ste_rx_head->ste_ptr->ste_status)) {
+		cur_rx = sc->ste_cdata.ste_rx_head;
+		sc->ste_cdata.ste_rx_head = cur_rx->ste_next;
+
+		/*
+		 * If an error occurs, update stats, clear the
+		 * status word and leave the mbuf cluster in place:
+		 * it should simply get re-used next time this descriptor
+	 	 * comes up in the ring.
+		 */
+		if (rxstat & STE_RXSTAT_FRAME_ERR) {
+			ifp->if_ierrors++;
+			cur_rx->ste_ptr->ste_status = 0;
+			continue;
+		}
+
+		/*
+		 * If there error bit was not set, the upload complete
+		 * bit should be set which means we have a valid packet.
+		 * If not, something truly strange has happened.
+		 */
+		if (!(rxstat & STE_RXSTAT_DMADONE)) {
+			printf("ste%d: bad receive status -- packet dropped",
+							sc->ste_unit);
+			ifp->if_ierrors++;
+			cur_rx->ste_ptr->ste_status = 0;
+			continue;
+		}
+
+		/* No errors; receive the packet. */	
+		m = cur_rx->ste_mbuf;
+		total_len = cur_rx->ste_ptr->ste_status & STE_RXSTAT_FRAMELEN;
+
+		/*
+		 * Try to conjure up a new mbuf cluster. If that
+		 * fails, it means we have an out of memory condition and
+		 * should leave the buffer in place and continue. This will
+		 * result in a lost packet, but there's little else we
+		 * can do in this situation.
+		 */
+		if (ste_newbuf(sc, cur_rx, NULL) == ENOBUFS) {
+			ifp->if_ierrors++;
+			cur_rx->ste_ptr->ste_status = 0;
+			continue;
+		}
+
+		ifp->if_ipackets++;
+		eh = mtod(m, struct ether_header *);
+		m->m_pkthdr.rcvif = ifp;
+		m->m_pkthdr.len = m->m_len = total_len;
+
+#if NBPFILTER > 0
+		if (ifp->if_bpf)
+			bpf_mtap(ifp->if_bpf, m);
+#endif
+
+#if 0
+#ifdef BRIDGE
+		if (do_bridge) {
+			struct ifnet *bdg_ifp ;
+			bdg_ifp = bridge_in(m);
+			if (bdg_ifp != BDG_LOCAL && bdg_ifp != BDG_DROP)
+				bdg_forward(&m, bdg_ifp);
+			if (((bdg_ifp != BDG_LOCAL) && (bdg_ifp != BDG_BCAST) &&
+			    (bdg_ifp != BDG_MCAST)) || bdg_ifp == BDG_DROP) {
+				m_freem(m);
+				continue;
+			}
+		}
+#endif
+#endif
+
+#if NBPFILTER > 0
+		/*
+		 * Don't pass packet up to the ether_input() layer unless it's
+		 * a broadcast packet, multicast packet, matches our ethernet
+		 * address or the interface is in promiscuous mode.
+		 */
+		if (ifp->if_bpf) {
+			if (ifp->if_flags & IFF_PROMISC &&
+			    (bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr,
+			    ETHER_ADDR_LEN) && (eh->ether_dhost[0] & 1) == 0)){
+				m_freem(m);
+				continue;
+			}
+		}
+#endif
+
+		/* Remove header from mbuf and pass it on. */
+		m_adj(m, sizeof(struct ether_header));
+		ether_input(ifp, eh, m);
+	}
+
+	/*
+	 * Handle the 'end of channel' condition. When the upload
+	 * engine hits the end of the RX ring, it will stall. This
+	 * is our cue to flush the RX ring, reload the uplist pointer
+	 * register and unstall the engine.
+	 * XXX This is actually a little goofy. With the ThunderLAN
+	 * chip, you get an interrupt when the receiver hits the end
+	 * of the receive ring, which tells you exactly when you
+	 * you need to reload the ring pointer. Here we have to
+	 * fake it. I'm mad at myself for not being clever enough
+	 * to avoid the use of a goto here.
+	 */
+	if (CSR_READ_4(sc, STE_RX_DMALIST_PTR) == 0 ||
+		CSR_READ_4(sc, STE_DMACTL) & STE_DMACTL_RXDMA_STOPPED) {
+		STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_RXDMA_STALL);
+		ste_wait(sc);
+		CSR_WRITE_4(sc, STE_RX_DMALIST_PTR,
+			vtophys(&sc->ste_ldata->ste_rx_list[0]));
+		sc->ste_cdata.ste_rx_head = &sc->ste_cdata.ste_rx_chain[0];
+		STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_RXDMA_UNSTALL);
+		goto again;
+	}
+
+	return;
+}
+
+void ste_txeoc(sc)
+	struct ste_softc	*sc;
+{
+	u_int8_t		txstat;
+	struct ifnet		*ifp;
+
+	ifp = &sc->arpcom.ac_if;
+
+	while ((txstat = CSR_READ_1(sc, STE_TX_STATUS)) &
+	    STE_TXSTATUS_TXDONE) {
+		if (txstat & STE_TXSTATUS_UNDERRUN ||
+		    txstat & STE_TXSTATUS_EXCESSCOLLS ||
+		    txstat & STE_TXSTATUS_RECLAIMERR) {
+			ifp->if_oerrors++;
+			printf("ste%d: transmission error: %x\n",
+			    sc->ste_unit, txstat);
+			STE_SETBIT4(sc, STE_ASICCTL, STE_ASICCTL_TX_RESET);
+
+			if (sc->ste_cdata.ste_tx_head != NULL)
+				CSR_WRITE_4(sc, STE_TX_DMALIST_PTR,
+				    vtophys(sc->ste_cdata.ste_tx_head->ste_ptr));
+			if (txstat & STE_TXSTATUS_UNDERRUN &&
+			    sc->ste_tx_thresh < STE_PACKET_SIZE) {
+				sc->ste_tx_thresh += STE_MIN_FRAMELEN;
+				printf("ste%d: tx underrun, increasing tx"
+				    " start threshold to %d bytes\n",
+				    sc->ste_unit, sc->ste_tx_thresh);
+			}
+			CSR_WRITE_2(sc, STE_TX_STARTTHRESH, sc->ste_tx_thresh);
+			CSR_WRITE_2(sc, STE_TX_RECLAIM_THRESH,
+			    (STE_PACKET_SIZE >> 4));
+		}
+		ste_init(sc);
+		CSR_WRITE_2(sc, STE_TX_STATUS, txstat);
+	}
+
+	return;
+}
+
+void ste_txeof(sc)
+	struct ste_softc	*sc;
+{
+	struct ste_chain	*cur_tx;
+	struct ifnet		*ifp;
+
+	ifp = &sc->arpcom.ac_if;
+
+	/* Clear the timeout timer. */
+	ifp->if_timer = 0;
+
+	while(sc->ste_cdata.ste_tx_head != NULL) {
+		cur_tx = sc->ste_cdata.ste_tx_head;
+		if (!(cur_tx->ste_ptr->ste_ctl & STE_TXCTL_DMADONE))
+			break;
+		sc->ste_cdata.ste_tx_head = cur_tx->ste_next;
+
+		m_freem(cur_tx->ste_mbuf);
+		cur_tx->ste_mbuf = NULL;
+		ifp->if_opackets++;
+
+		cur_tx->ste_next = sc->ste_cdata.ste_tx_free;
+		sc->ste_cdata.ste_tx_free = cur_tx;
+	}
+
+	if (sc->ste_cdata.ste_tx_head == NULL) {
+		ifp->if_flags &= ~IFF_OACTIVE;
+		sc->ste_cdata.ste_tx_tail = NULL;
+	} else {
+		if (CSR_READ_4(sc, STE_DMACTL) & STE_DMACTL_TXDMA_STOPPED ||
+		    !CSR_READ_4(sc, STE_TX_DMALIST_PTR)) {
+			CSR_WRITE_4(sc, STE_TX_DMALIST_PTR,
+			    vtophys(sc->ste_cdata.ste_tx_head->ste_ptr));
+			CSR_WRITE_4(sc, STE_DMACTL, STE_DMACTL_TXDMA_UNSTALL);
+		}
+	}
+
+	return;
+}
+
+void ste_stats_update(xsc)
+	void			*xsc;
+{
+	struct ste_softc	*sc;
+	struct ste_stats	stats;
+	struct ifnet		*ifp;
+	struct mii_data		*mii;
+	int			i, s;
+	u_int8_t		*p;
+
+	s = splimp();
+
+	sc = xsc;
+	ifp = &sc->arpcom.ac_if;
+	mii = &sc->sc_mii;
+
+	p = (u_int8_t *)&stats;
+
+	for (i = 0; i < sizeof(stats); i++) {
+		*p = CSR_READ_1(sc, STE_STATS + i);
+		p++;
+	}
+
+	ifp->if_collisions += stats.ste_single_colls +
+	    stats.ste_multi_colls + stats.ste_late_colls;
+
+	mii_tick(mii);
+
+	timeout(ste_stats_update, sc, hz);
+	splx(s);
+
+	return;
+}
+
+
+/*
+ * Probe for a Sundance ST201 chip. Check the PCI vendor and device
+ * IDs against our list and return a device name if we find a match.
+ */
+int ste_probe(parent, match, aux)
+	struct device		*parent;
+	void			*match, *aux;
+{
+	struct pci_attach_args	*pa = (struct pci_attach_args *)aux;
+
+	if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_SUNDANCE &&
+	    PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_SUNDANCE_ST201)
+		return(1);
+
+	if (PCI_VENDOR(pa->pa_id) == PCI_VENDOR_DLINK &&
+	    PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_DLINK_550TX)
+		return(1);
+
+	return(0);
+}
+
+/*
+ * Attach the interface. Allocate softc structures, do ifmedia
+ * setup and ethernet/BPF attach.
+ */
+void ste_attach(parent, self, aux)
+	struct device		*parent, *self;
+	void			*aux;
+{
+	int			s;
+	const char		*intrstr = NULL;
+	u_int32_t		command;
+	struct ste_softc	*sc = (struct ste_softc *)self;
+	struct pci_attach_args	*pa = aux;
+	pci_chipset_tag_t	pc = pa->pa_pc;
+	pci_intr_handle_t	ih;
+	struct ifnet		*ifp;
+	bus_addr_t		iobase;
+	bus_size_t		iosize;
+
+	s = splimp();
+	sc->ste_unit = sc->sc_dev.dv_unit;
+
+	/*
+	 * Handle power management nonsense.
+	 */
+	command = pci_conf_read(pc, pa->pa_tag, STE_PCI_CAPID) & 0x000000FF;
+	if (command == 0x01) {
+
+		command = pci_conf_read(pc, pa->pa_tag, STE_PCI_PWRMGMTCTRL);
+		if (command & STE_PSTATE_MASK) {
+			u_int32_t		iobase, membase, irq;
+
+			/* Save important PCI config data. */
+			iobase = pci_conf_read(pc, pa->pa_tag, STE_PCI_LOIO);
+			membase = pci_conf_read(pc, pa->pa_tag, STE_PCI_LOMEM);
+			irq = pci_conf_read(pc, pa->pa_tag, STE_PCI_INTLINE);
+
+			/* Reset the power state. */
+			printf("ste%d: chip is in D%d power mode "
+			"-- setting to D0\n", sc->ste_unit, command & STE_PSTATE_MASK);
+			command &= 0xFFFFFFFC;
+			pci_conf_write(pc, pa->pa_tag, STE_PCI_PWRMGMTCTRL, command);
+
+			/* Restore PCI config data. */
+			pci_conf_write(pc, pa->pa_tag, STE_PCI_LOIO, iobase);
+			pci_conf_write(pc, pa->pa_tag, STE_PCI_LOMEM, membase);
+			pci_conf_write(pc, pa->pa_tag, STE_PCI_INTLINE, irq);
+		}
+	}
+
+	/*
+	 * Map control/status registers.
+	 */
+	command = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
+	command |= PCI_COMMAND_IO_ENABLE | PCI_COMMAND_MEM_ENABLE |
+	    PCI_COMMAND_MASTER_ENABLE;
+	pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, command);
+	command = pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
+
+#ifdef STE_USEIOSPACE
+	if (!(command & PCI_COMMAND_IO_ENABLE)) {
+		printf(": failed to enable I/O ports\n");
+		goto fail;
+	}
+	if (pci_io_find(pc, pa->pa_tag, STE_PCI_LOIO, &iobase, &iosize)) {
+		printf(": can't find I/O space\n");
+		goto fail;
+	}
+	if (bus_space_map(pa->pa_iot, iobase, iosize, 0, &sc->ste_bhandle)) {
+		printf(": can't map I/O space\n");
+		goto fail;
+	}
+	sc->ste_btag = pa->pa_iot;
+#else
+	if (!(command & PCI_COMMAND_MEM_ENABLE)) {
+		printf(": failed to enable memory mapping\n");
+		goto fail;
+	}
+	if (pci_mem_find(pc, pa->pa_tag, STE_PCI_LOMEM, &iobase, &iosize,NULL)){
+		printf(": can't find mem space\n");
+		goto fail;
+	}
+	if (bus_space_map(pa->pa_memt, iobase, iosize, 0, &sc->ste_bhandle)) {
+		printf(": can't map mem space\n");
+		goto fail;
+	}
+	sc->ste_btag = pa->pa_memt;
+#endif
+
+	/* Allocate interrupt */
+	if (pci_intr_map(pc, pa->pa_intrtag, pa->pa_intrpin, pa->pa_intrline,
+	    &ih)) {
+		printf(": couldn't map interrupt\n");
+		goto fail;
+	}
+	intrstr = pci_intr_string(pc, ih);
+	sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, ste_intr, sc,
+	    self->dv_xname);
+	if (sc->sc_ih == NULL) {
+		printf(": couldn't establish interrupt");
+		if (intrstr != NULL)
+			printf(" at %s", intrstr);
+		printf("\n");
+		goto fail;
+	}
+	printf(": %s", intrstr);
+
+	/* Reset the adapter. */
+	ste_reset(sc);
+
+	/*
+	 * Get station address from the EEPROM.
+	 */
+	ste_read_eeprom(sc,(caddr_t)&sc->arpcom.ac_enaddr,STE_EEADDR_NODE0,3,0);
+
+	printf(" address %s\n", ether_sprintf(sc->arpcom.ac_enaddr));
+
+	sc->ste_ldata_ptr = malloc(sizeof(struct ste_list_data) + 8,
+				M_DEVBUF, M_NOWAIT);
+	if (sc->ste_ldata_ptr == NULL) {
+		printf("%s: no memory for list buffers!\n", sc->ste_unit);
+		goto fail;
+	}
+
+	sc->ste_ldata = (struct ste_list_data *)sc->ste_ldata_ptr;
+	bzero(sc->ste_ldata, sizeof(struct ste_list_data));
+
+	ifp = &sc->arpcom.ac_if;
+	ifp->if_softc = sc;
+	ifp->if_mtu = ETHERMTU;
+	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
+	ifp->if_ioctl = ste_ioctl;
+	ifp->if_output = ether_output;
+	ifp->if_start = ste_start;
+	ifp->if_watchdog = ste_watchdog;
+	ifp->if_baudrate = 10000000;
+	ifp->if_snd.ifq_maxlen = STE_TX_LIST_CNT - 1;
+	bcopy(sc->sc_dev.dv_xname, ifp->if_xname, IFNAMSIZ);
+
+	sc->sc_mii.mii_ifp = ifp;
+	sc->sc_mii.mii_readreg = ste_miibus_readreg;
+	sc->sc_mii.mii_writereg = ste_miibus_writereg;
+	sc->sc_mii.mii_statchg = ste_miibus_statchg;
+	ifmedia_init(&sc->sc_mii.mii_media, 0, ste_ifmedia_upd,ste_ifmedia_sts);
+	mii_phy_probe(self, &sc->sc_mii, 0xffffffff);
+	if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) {
+		ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
+		ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE);
+	} else
+		ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO);
+
+	/*
+	 * Call MI attach routines.
+	 */
+	if_attach(ifp);
+	ether_ifattach(ifp);
+
+#if NBPFILTER > 0
+	bpfattach(&sc->arpcom.ac_if.if_bpf, ifp, DLT_EN10MB,
+	    sizeof(struct ether_header));
+#endif
+	shutdownhook_establish(ste_shutdown, sc);
+
+fail:
+	splx(s);
+	return;
+}
+
+int ste_newbuf(sc, c, m)
+	struct ste_softc	*sc;
+	struct ste_chain_onefrag	*c;
+	struct mbuf		*m;
+{
+	struct mbuf		*m_new = NULL;
+
+	if (m == NULL) {
+		MGETHDR(m_new, M_DONTWAIT, MT_DATA);
+		if (m_new == NULL) {
+			printf("ste%d: no memory for rx list -- "
+			    "packet dropped\n", sc->ste_unit);
+			return(ENOBUFS);
+		}
+		MCLGET(m_new, M_DONTWAIT);
+		if (!(m_new->m_flags & M_EXT)) {
+			printf("ste%d: no memory for rx list -- "
+			    "packet dropped\n", sc->ste_unit);
+			m_freem(m_new);
+			return(ENOBUFS);
+		}
+		m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
+	} else {
+		m_new = m;
+		m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
+		m_new->m_data = m_new->m_ext.ext_buf;
+	}
+
+	m_adj(m_new, ETHER_ALIGN);
+
+	c->ste_mbuf = m_new;
+	c->ste_ptr->ste_status = 0;
+	c->ste_ptr->ste_frag.ste_addr = vtophys(mtod(m_new, caddr_t));
+	c->ste_ptr->ste_frag.ste_len = 1536 | STE_FRAG_LAST;
+
+	return(0);
+}
+
+int ste_init_rx_list(sc)
+	struct ste_softc	*sc;
+{
+	struct ste_chain_data	*cd;
+	struct ste_list_data	*ld;
+	int			i;
+
+	cd = &sc->ste_cdata;
+	ld = sc->ste_ldata;
+
+	for (i = 0; i < STE_RX_LIST_CNT; i++) {
+		cd->ste_rx_chain[i].ste_ptr = &ld->ste_rx_list[i];
+		if (ste_newbuf(sc, &cd->ste_rx_chain[i], NULL) == ENOBUFS)
+			return(ENOBUFS);
+		if (i == (STE_RX_LIST_CNT - 1)) {
+			cd->ste_rx_chain[i].ste_next =
+			    &cd->ste_rx_chain[0];
+			ld->ste_rx_list[i].ste_next =
+			    vtophys(&ld->ste_rx_list[0]);
+		} else {
+			cd->ste_rx_chain[i].ste_next =
+			    &cd->ste_rx_chain[i + 1];
+			ld->ste_rx_list[i].ste_next =
+			    vtophys(&ld->ste_rx_list[i + 1]);
+		}
+
+	}
+
+	cd->ste_rx_head = &cd->ste_rx_chain[0];
+
+	return(0);
+}
+
+void ste_init_tx_list(sc)
+	struct ste_softc	*sc;
+{
+	struct ste_chain_data	*cd;
+	struct ste_list_data	*ld;
+	int			i;
+
+	cd = &sc->ste_cdata;
+	ld = sc->ste_ldata;
+	for (i = 0; i < STE_TX_LIST_CNT; i++) {
+		cd->ste_tx_chain[i].ste_ptr = &ld->ste_tx_list[i];
+		if (i == (STE_TX_LIST_CNT - 1))
+			cd->ste_tx_chain[i].ste_next = NULL;
+		else
+			cd->ste_tx_chain[i].ste_next =
+			    &cd->ste_tx_chain[i + 1];
+	}
+
+	cd->ste_tx_free = &cd->ste_tx_chain[0];
+	cd->ste_tx_tail = cd->ste_tx_head = NULL;
+
+	return;
+}
+
+void ste_init(xsc)
+	void			*xsc;
+{
+	struct ste_softc	*sc = (struct ste_softc *)xsc;
+	struct ifnet		*ifp = &sc->arpcom.ac_if;
+	struct mii_data		*mii;
+	int			i, s;
+
+	s = splimp();
+
+	ste_stop(sc);
+
+	mii = &sc->sc_mii;
+
+	/* Init our MAC address */
+	for (i = 0; i < ETHER_ADDR_LEN; i++) {
+		CSR_WRITE_1(sc, STE_PAR0 + i, sc->arpcom.ac_enaddr[i]);
+	}
+
+	/* Init RX list */
+	if (ste_init_rx_list(sc) == ENOBUFS) {
+		printf("ste%d: initialization failed: no "
+		    "memory for RX buffers\n", sc->ste_unit);
+		ste_stop(sc);
+		splx(s);
+		return;
+	}
+
+	/* Init TX descriptors */
+	ste_init_tx_list(sc);
+
+	/* Set the TX freethresh value */
+	CSR_WRITE_1(sc, STE_TX_DMABURST_THRESH, STE_PACKET_SIZE >> 8);
+
+	/* Set the TX start threshold for best performance. */
+	sc->ste_tx_thresh = STE_MIN_FRAMELEN;
+	CSR_WRITE_2(sc, STE_TX_STARTTHRESH, sc->ste_tx_thresh);
+
+	/* Set the TX reclaim threshold. */
+	CSR_WRITE_1(sc, STE_TX_RECLAIM_THRESH, (STE_PACKET_SIZE >> 4));
+
+	/* Set up the RX filter. */
+	CSR_WRITE_1(sc, STE_RX_MODE, STE_RXMODE_UNICAST);
+
+	/* If we want promiscuous mode, set the allframes bit. */
+	if (ifp->if_flags & IFF_PROMISC) {
+		STE_SETBIT1(sc, STE_RX_MODE, STE_RXMODE_PROMISC);
+	} else {
+		STE_CLRBIT1(sc, STE_RX_MODE, STE_RXMODE_PROMISC);
+	}
+
+	/* Set capture broadcast bit to accept broadcast frames. */
+	if (ifp->if_flags & IFF_BROADCAST) {
+		STE_SETBIT1(sc, STE_RX_MODE, STE_RXMODE_BROADCAST);
+	} else {
+		STE_CLRBIT1(sc, STE_RX_MODE, STE_RXMODE_BROADCAST);
+	}
+
+	ste_setmulti(sc);
+
+	/* Load the address of the RX list. */
+	STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_RXDMA_STALL);
+	ste_wait(sc);
+	CSR_WRITE_4(sc, STE_RX_DMALIST_PTR,
+	    vtophys(&sc->ste_ldata->ste_rx_list[0]));
+	STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_RXDMA_UNSTALL);
+	STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_RXDMA_UNSTALL);
+
+	/* Enable receiver and transmitter */
+	CSR_WRITE_2(sc, STE_MACCTL0, 0);
+	STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_TX_ENABLE);
+	STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_RX_ENABLE);
+
+	/* Enable stats counters. */
+	STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_STATS_ENABLE);
+
+	/* Enable interrupts. */
+	CSR_WRITE_2(sc, STE_ISR, 0xFFFF);
+	CSR_WRITE_2(sc, STE_IMR, STE_INTRS);
+
+	mii_mediachg(mii);
+
+	ifp->if_flags |= IFF_RUNNING;
+	ifp->if_flags &= ~IFF_OACTIVE;
+
+	splx(s);
+
+	timeout(ste_stats_update, sc, hz);
+
+	return;
+}
+
+void ste_stop(sc)
+	struct ste_softc	*sc;
+{
+	int			i;
+	struct ifnet		*ifp;
+
+	ifp = &sc->arpcom.ac_if;
+
+	untimeout(ste_stats_update, sc);
+
+	CSR_WRITE_2(sc, STE_IMR, 0);
+	STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_TX_DISABLE);
+	STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_RX_DISABLE);
+	STE_SETBIT2(sc, STE_MACCTL1, STE_MACCTL1_STATS_DISABLE);
+	STE_SETBIT2(sc, STE_DMACTL, STE_DMACTL_TXDMA_STALL);
+	STE_SETBIT2(sc, STE_DMACTL, STE_DMACTL_RXDMA_STALL);
+	ste_wait(sc);
+
+	for (i = 0; i < STE_RX_LIST_CNT; i++) {
+		if (sc->ste_cdata.ste_rx_chain[i].ste_mbuf != NULL) {
+			m_freem(sc->ste_cdata.ste_rx_chain[i].ste_mbuf);
+			sc->ste_cdata.ste_rx_chain[i].ste_mbuf = NULL;
+		}
+	}
+
+	for (i = 0; i < STE_TX_LIST_CNT; i++) {
+		if (sc->ste_cdata.ste_tx_chain[i].ste_mbuf != NULL) {
+			m_freem(sc->ste_cdata.ste_tx_chain[i].ste_mbuf);
+			sc->ste_cdata.ste_tx_chain[i].ste_mbuf = NULL;
+		}
+	}
+
+	ifp->if_flags &= ~(IFF_RUNNING|IFF_OACTIVE);
+
+	return;
+}
+
+void ste_reset(sc)
+	struct ste_softc	*sc;
+{
+	int			i;
+
+	STE_SETBIT4(sc, STE_ASICCTL,
+	    STE_ASICCTL_GLOBAL_RESET|STE_ASICCTL_RX_RESET|
+	    STE_ASICCTL_TX_RESET|STE_ASICCTL_DMA_RESET|
+	    STE_ASICCTL_FIFO_RESET|STE_ASICCTL_NETWORK_RESET|
+	    STE_ASICCTL_AUTOINIT_RESET|STE_ASICCTL_HOST_RESET|
+	    STE_ASICCTL_EXTRESET_RESET);
+
+	DELAY(100000);
+
+	for (i = 0; i < STE_TIMEOUT; i++) {
+		if (!(CSR_READ_4(sc, STE_ASICCTL) & STE_ASICCTL_RESET_BUSY))
+			break;
+	}
+
+	if (i == STE_TIMEOUT)
+		printf("ste%d: global reset never completed\n", sc->ste_unit);
+
+#ifdef foo
+	STE_SETBIT4(sc, STE_ASICCTL, STE_ASICCTL_RX_RESET);
+	for (i = 0; i < STE_TIMEOUT; i++) {
+		if (!(CSR_READ_4(sc, STE_ASICCTL) & STE_ASICCTL_RX_RESET))
+			break;
+	}
+
+	if (i == STE_TIMEOUT)
+		printf("ste%d: RX reset never completed\n", sc->ste_unit);
+
+	DELAY(100000);
+
+	STE_SETBIT4(sc, STE_ASICCTL, STE_ASICCTL_TX_RESET);
+	for (i = 0; i < STE_TIMEOUT; i++) {
+		if (!(CSR_READ_4(sc, STE_ASICCTL) & STE_ASICCTL_TX_RESET))
+			break;
+	}
+
+	if (i == STE_TIMEOUT)
+		printf("ste%d: TX reset never completed\n", sc->ste_unit);
+
+	DELAY(100000);
+#endif
+
+	return;
+}
+
+int ste_ioctl(ifp, command, data)
+	struct ifnet		*ifp;
+	u_long			command;
+	caddr_t			data;
+{
+	struct ste_softc	*sc = ifp->if_softc;
+	struct ifreq		*ifr = (struct ifreq *) data;
+	struct ifaddr		*ifa = (struct ifaddr *)data;
+	struct mii_data		*mii;
+	int			s, error = 0;
+
+	s = splimp();
+
+	if ((error = ether_ioctl(ifp, &sc->arpcom, command, data)) > 0) {
+		splx(s);
+		return error;
+	}
+
+	switch(command) {
+	case SIOCSIFADDR:
+		ifp->if_flags |= IFF_UP;
+		switch (ifa->ifa_addr->sa_family) {
+		case AF_INET:
+			ste_init(sc);
+			arp_ifinit(&sc->arpcom, ifa);
+			break;
+		default:
+			ste_init(sc);
+			break;
+		}
+		break;
+	case SIOCSIFFLAGS:
+		if (ifp->if_flags & IFF_UP) {
+			ste_init(sc);
+		} else {
+			if (ifp->if_flags & IFF_RUNNING)
+				ste_stop(sc);
+		}
+		error = 0;
+		break;
+	case SIOCADDMULTI:
+	case SIOCDELMULTI:
+		ste_setmulti(sc);
+		error = 0;
+		break;
+	case SIOCGIFMEDIA:
+	case SIOCSIFMEDIA:
+		mii = &sc->sc_mii;
+		error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
+		break;
+	default:
+		error = EINVAL;
+		break;
+	}
+
+	splx(s);
+
+	return(error);
+}
+
+int ste_encap(sc, c, m_head)
+	struct ste_softc	*sc;
+	struct ste_chain	*c;
+	struct mbuf		*m_head;
+{
+	int			frag = 0;
+	struct ste_frag		*f = NULL;
+	int			total_len;
+	struct mbuf		*m;
+
+	m = m_head;
+	total_len = 0;
+
+	for (m = m_head, frag = 0; m != NULL; m = m->m_next) {
+		if (m->m_len != 0) {
+			if (frag == STE_MAXFRAGS)
+				break;
+			total_len += m->m_len;
+			f = &c->ste_ptr->ste_frags[frag];
+			f->ste_addr = vtophys(mtod(m, vm_offset_t));
+			f->ste_len = m->m_len;
+			frag++;
+		}
+	}
+
+	if (m != NULL) {
+		struct mbuf		*m_new = NULL;
+
+		MGETHDR(m_new, M_DONTWAIT, MT_DATA);
+		if (m_new == NULL) {
+			printf("ste%d: no memory for "
+			   "tx list", sc->ste_unit);
+			return(1);
+		}
+		if (m_head->m_pkthdr.len > MHLEN) {
+			MCLGET(m_new, M_DONTWAIT);
+			if (!(m_new->m_flags & M_EXT)) {
+				m_freem(m_new);
+				printf("ste%d: no memory for "
+			   	    "tx list", sc->ste_unit);
+				return(1);
+			}
+		}
+		m_copydata(m_head, 0, m_head->m_pkthdr.len,
+		    mtod(m_new, caddr_t));
+		m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len;
+		m_freem(m_head);
+		m_head = m_new;
+		f = &c->ste_ptr->ste_frags[0];
+		f->ste_addr = vtophys(mtod(m_new, caddr_t));
+		f->ste_len = total_len = m_new->m_len;
+		frag = 1;
+	}
+
+	c->ste_mbuf = m_head;
+	c->ste_ptr->ste_frags[frag - 1].ste_len |= STE_FRAG_LAST;
+	c->ste_ptr->ste_ctl = total_len;
+	c->ste_ptr->ste_next = 0;
+
+	return(0);
+}
+
+void ste_start(ifp)
+	struct ifnet		*ifp;
+{
+	struct ste_softc	*sc;
+	struct mbuf		*m_head = NULL;
+	struct ste_chain	*prev = NULL, *cur_tx = NULL, *start_tx;
+
+	sc = ifp->if_softc;
+
+	if (sc->ste_cdata.ste_tx_free == NULL) {
+		ifp->if_flags |= IFF_OACTIVE;
+		return;
+	}
+
+	start_tx = sc->ste_cdata.ste_tx_free;
+
+	while(sc->ste_cdata.ste_tx_free != NULL) {
+		IF_DEQUEUE(&ifp->if_snd, m_head);
+		if (m_head == NULL)
+			break;
+
+		cur_tx = sc->ste_cdata.ste_tx_free;
+		sc->ste_cdata.ste_tx_free = cur_tx->ste_next;
+
+		cur_tx->ste_next = NULL;
+
+		ste_encap(sc, cur_tx, m_head);
+
+		if (prev != NULL) {
+			prev->ste_next = cur_tx;
+			prev->ste_ptr->ste_next = vtophys(cur_tx->ste_ptr);
+		}
+		prev = cur_tx;
+
+#if NBPFILTER > 0
+		/*
+		 * If there's a BPF listener, bounce a copt of this frame
+		 * to him.
+	 	 */
+		if (ifp->if_bpf)
+			bpf_mtap(ifp->if_bpf, cur_tx->ste_mbuf);
+#endif
+	}
+
+	if (cur_tx == NULL)
+		return;
+
+	cur_tx->ste_ptr->ste_ctl |= STE_TXCTL_DMAINTR;
+
+	STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_TXDMA_STALL);
+	ste_wait(sc);
+
+	if (sc->ste_cdata.ste_tx_head != NULL) {
+		sc->ste_cdata.ste_tx_tail->ste_next = start_tx;
+		sc->ste_cdata.ste_tx_tail->ste_ptr->ste_next =
+		    vtophys(start_tx->ste_ptr);
+		sc->ste_cdata.ste_tx_tail->ste_ptr->ste_ctl &=
+		    ~STE_TXCTL_DMAINTR;
+		sc->ste_cdata.ste_tx_tail = cur_tx;
+	} else {
+		sc->ste_cdata.ste_tx_head = start_tx;
+		sc->ste_cdata.ste_tx_tail = cur_tx;
+	}
+
+	if (!CSR_READ_4(sc, STE_TX_DMALIST_PTR))
+		CSR_WRITE_4(sc, STE_TX_DMALIST_PTR,
+		    vtophys(start_tx->ste_ptr));
+	STE_SETBIT4(sc, STE_DMACTL, STE_DMACTL_TXDMA_UNSTALL);
+
+	ifp->if_timer = 5;
+
+	return;
+}
+
+void ste_watchdog(ifp)
+	struct ifnet		*ifp;
+{
+	struct ste_softc	*sc;
+
+	sc = ifp->if_softc;
+
+	ifp->if_oerrors++;
+	printf("ste%d: watchdog timeout\n", sc->ste_unit);
+
+#ifdef foo
+	if (sc->ste_pinfo != NULL) {
+		if (!(ste_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT))
+			printf("ste%d: no carrier - transceiver "
+			    "cable problem?\n", sc->ste_unit);
+	}
+#endif
+
+	ste_txeoc(sc);
+	ste_txeof(sc);
+	ste_rxeof(sc);
+	ste_reset(sc);
+	ste_init(sc);
+
+	if (ifp->if_snd.ifq_head != NULL)
+		ste_start(ifp);
+
+	return;
+}
+
+void ste_shutdown(v)
+	void			*v;
+{
+	struct ste_softc	*sc = (struct ste_softc *)v;
+
+	ste_stop(sc);
+}
+
+struct cfattach ste_ca = {
+	sizeof(struct ste_softc), ste_probe, ste_attach
+};
+
+struct cfdriver ste_cd = {
+	0, "ste", DV_IFNET
+};
+
diff --git a/sys/dev/pci/if_stereg.h b/sys/dev/pci/if_stereg.h
new file mode 100644
index 00000000000..49b23df118d
--- /dev/null
+++ b/sys/dev/pci/if_stereg.h
@@ -0,0 +1,533 @@
+/*	$OpenBSD: if_stereg.h,v 1.1 1999/12/07 01:45:29 aaron Exp $ */
+/*
+ * Copyright (c) 1997, 1998, 1999
+ *	Bill Paul <wpaul@ctr.columbia.edu>.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed by Bill Paul.
+ * 4. Neither the name of the author nor the names of any co-contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ * THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $FreeBSD: src/sys/pci/if_stereg.h,v 1.4 1999/09/18 04:04:03 wpaul Exp $
+ */
+
+/*
+ * Sundance PCI device/vendor ID for the
+ * ST201 chip.
+ */
+#define ST_VENDORID		0x13F0
+#define ST_DEVICEID_ST201	0x0201
+
+/*
+ * D-Link PCI device/vendor ID for the DFE-550TX.
+ */
+#define DL_VENDORID		0x1186
+#define DL_DEVICEID_550TX	0x1002
+
+/*
+ * Register definitions for the Sundance Technologies ST201 PCI
+ * fast ethernet controller. The register space is 128 bytes long and
+ * can be accessed using either PCI I/O space or PCI memory mapping.
+ * There are 32-bit, 16-bit and 8-bit registers.
+ */
+
+#define STE_DMACTL		0x00
+#define STE_TX_DMALIST_PTR	0x04
+#define STE_TX_DMABURST_THRESH	0x08
+#define STE_TX_DMAURG_THRESH	0x09
+#define STE_TX_DMAPOLL_PERIOD	0x0A
+#define STE_RX_DMASTATUS	0x0C
+#define STE_RX_DMALIST_PTR	0x10
+#define STE_RX_DMABURST_THRESH	0x14
+#define STE_RX_DMAURG_THRESH	0x15
+#define STE_RX_DMAPOLL_PERIOD	0x16
+#define STE_DEBUGCTL		0x1A
+#define STE_ASICCTL		0x30
+#define STE_EEPROM_DATA		0x34
+#define STE_EEPROM_CTL		0x36
+#define STE_FIFOCTL		0x3A
+#define STE_TX_STARTTHRESH	0x3C
+#define STE_RX_EARLYTHRESH	0x3E
+#define STE_EXT_ROMADDR		0x40
+#define STE_EXT_ROMDATA		0x44
+#define STE_WAKE_EVENT		0x45
+#define STE_TX_STATUS		0x46
+#define STE_TX_FRAMEID		0x47
+#define STE_COUNTDOWN		0x48
+#define STE_ISR_ACK		0x4A
+#define STE_IMR			0x4C
+#define STE_ISR			0x4E
+#define STE_MACCTL0		0x50
+#define STE_MACCTL1		0x52
+#define STE_PAR0		0x54
+#define STE_PAR1		0x56
+#define STE_PAR2		0x58
+#define STE_MAX_FRAMELEN	0x5A
+#define STE_RX_MODE		0x5C
+#define STE_TX_RECLAIM_THRESH	0x5D
+#define STE_PHYCTL		0x5E
+#define STE_MAR0		0x60
+#define STE_MAR1		0x64
+#define STE_STATS		0x68
+
+#define STE_DMACTL_RXDMA_STOPPED	0x00000001
+#define STE_DMACTL_TXDMA_CMPREQ		0x00000002
+#define STE_DMACTL_TXDMA_STOPPED	0x00000004
+#define STE_DMACTL_RXDMA_COMPLETE	0x00000008
+#define STE_DMACTL_TXDMA_COMPLETE	0x00000010
+#define STE_DMACTL_RXDMA_STALL		0x00000100
+#define STE_DMACTL_RXDMA_UNSTALL	0x00000200
+#define STE_DMACTL_TXDMA_STALL		0x00000400
+#define STE_DMACTL_TXDMA_UNSTALL	0x00000800
+#define STE_DMACTL_TXDMA_INPROG		0x00004000
+#define STE_DMACTL_DMA_HALTINPROG	0x00008000
+#define STE_DMACTL_RXEARLY_ENABLE	0x00020000
+#define STE_DMACTL_COUNTDOWN_SPEED	0x00040000
+#define STE_DMACTL_COUNTDOWN_MODE	0x00080000
+#define STE_DMACTL_MWI_DISABLE		0x00100000
+#define STE_DMACTL_RX_DISCARD_OFLOWS	0x00400000
+#define STE_DMACTL_COUNTDOWN_ENABLE	0x00800000
+#define STE_DMACTL_TARGET_ABORT		0x40000000
+#define STE_DMACTL_MASTER_ABORT		0x80000000
+
+/*
+ * TX DMA burst thresh is the number of 32-byte blocks that
+ * must be loaded into the TX Fifo before a TXDMA burst request
+ * will be issued.
+ */
+#define STE_TXDMABURST_THRESH		0x1F
+
+/*
+ * The number of 32-byte blocks in the TX FIFO falls below the
+ * TX DMA urgent threshold, a TX DMA urgent request will be
+ * generated.
+ */
+#define STE_TXDMAURG_THRESH		0x3F
+
+/*
+ * Number of 320ns intervals between polls of the TXDMA next
+ * descriptor pointer (if we're using polling mode).
+ */
+#define STE_TXDMA_POLL_PERIOD		0x7F
+
+#define STE_RX_DMASTATUS_FRAMELEN	0x00001FFF
+#define STE_RX_DMASTATUS_RXERR		0x00004000
+#define STE_RX_DMASTATUS_DMADONE	0x00008000
+#define STE_RX_DMASTATUS_FIFO_OFLOW	0x00010000
+#define STE_RX_DMASTATUS_RUNT		0x00020000
+#define STE_RX_DMASTATUS_ALIGNERR	0x00040000
+#define STE_RX_DMASTATUS_CRCERR		0x00080000
+#define STE_RX_DMASTATUS_GIANT		0x00100000
+#define STE_RX_DMASTATUS_DRIBBLE	0x00800000
+#define STE_RX_DMASTATUS_DMA_OFLOW	0x01000000
+
+/*
+ * RX DMA burst thresh is the number of 32-byte blocks that
+ * must be present in the RX FIFO before a RXDMA bus master
+ * request will be issued.
+ */
+#define STE_RXDMABURST_THRESH		0xFF
+
+/*
+ * The number of 32-byte blocks in the RX FIFO falls below the
+ * RX DMA urgent threshold, a RX DMA urgent request will be
+ * generated.
+ */
+#define STE_RXDMAURG_THRESH		0x1F
+
+/*
+ * Number of 320ns intervals between polls of the RXDMA complete
+ * bit in the status field on the current RX descriptor (if we're
+ * using polling mode).
+ */
+#define STE_RXDMA_POLL_PERIOD		0x7F
+
+#define STE_DEBUGCTL_GPIO0_CTL		0x0001
+#define STE_DEBUGCTL_GPIO1_CTL		0x0002
+#define STE_DEBUGCTL_GPIO0_DATA		0x0004
+#define STE_DEBUGCTL_GPIO1_DATA		0x0008
+
+#define STE_ASICCTL_ROMSIZE		0x00000002
+#define STE_ASICCTL_TX_LARGEPKTS	0x00000004
+#define STE_ASICCTL_RX_LARGEPKTS	0x00000008
+#define STE_ASICCTL_EXTROM_DISABLE	0x00000010
+#define STE_ASICCTL_PHYSPEED_10		0x00000020
+#define STE_ASICCTL_PHYSPEED_100	0x00000040
+#define STE_ASICCTL_PHYMEDIA		0x00000080
+#define STE_ASICCTL_FORCEDCONFIG	0x00000700
+#define STE_ASICCTL_D3RESET_DISABLE	0x00000800
+#define STE_ASICCTL_SPEEDUPMODE		0x00002000
+#define STE_ASICCTL_LEDMODE		0x00004000
+#define STE_ASICCTL_RSTOUT_POLARITY	0x00008000
+#define STE_ASICCTL_GLOBAL_RESET	0x00010000
+#define STE_ASICCTL_RX_RESET		0x00020000
+#define STE_ASICCTL_TX_RESET		0x00040000
+#define STE_ASICCTL_DMA_RESET		0x00080000
+#define STE_ASICCTL_FIFO_RESET		0x00100000
+#define STE_ASICCTL_NETWORK_RESET	0x00200000
+#define STE_ASICCTL_HOST_RESET		0x00400000
+#define STE_ASICCTL_AUTOINIT_RESET	0x00800000
+#define STE_ASICCTL_EXTRESET_RESET	0x01000000
+#define STE_ASICCTL_SOFTINTR		0x02000000
+#define STE_ASICCTL_RESET_BUSY		0x04000000
+
+#define STE_ASICCTL1_GLOBAL_RESET	0x0001
+#define STE_ASICCTL1_RX_RESET		0x0002
+#define STE_ASICCTL1_TX_RESET		0x0004
+#define STE_ASICCTL1_DMA_RESET		0x0008
+#define STE_ASICCTL1_FIFO_RESET		0x0010
+#define STE_ASICCTL1_NETWORK_RESET	0x0020
+#define STE_ASICCTL1_HOST_RESET		0x0040
+#define STE_ASICCTL1_AUTOINIT_RESET	0x0080
+#define STE_ASICCTL1_EXTRESET_RESET	0x0100
+#define STE_ASICCTL1_SOFTINTR		0x0200
+#define STE_ASICCTL1_RESET_BUSY		0x0400
+
+#define STE_EECTL_ADDR			0x00FF
+#define STE_EECTL_OPCODE		0x0300
+#define STE_EECTL_BUSY			0x1000
+
+#define STE_EEOPCODE_WRITE		0x0100
+#define STE_EEOPCODE_READ		0x0200
+#define STE_EEOPCODE_ERASE		0x0300
+
+#define STE_FIFOCTL_RAMTESTMODE		0x0001
+#define STE_FIFOCTL_OVERRUNMODE		0x0200
+#define STE_FIFOCTL_RXFIFOFULL		0x0800
+#define STE_FIFOCTL_TX_BUSY		0x4000
+#define STE_FIFOCTL_RX_BUSY		0x8000
+
+/*
+ * The number of bytes that must in present in the TX FIFO before
+ * transmission begins. Value should be in increments of 4 bytes.
+ */
+#define STE_TXSTART_THRESH		0x1FFF
+
+/*
+ * Number of bytes that must be present in the RX FIFO before
+ * an RX EARLY interrupt is generated.
+ */
+#define STE_RXEARLY_THRESH		0x1FFF
+
+#define STE_WAKEEVENT_WAKEPKT_ENB	0x01
+#define STE_WAKEEVENT_MAGICPKT_ENB	0x02
+#define STE_WAKEEVENT_LINKEVT_ENB	0x04
+#define STE_WAKEEVENT_WAKEPOLARITY	0x08
+#define STE_WAKEEVENT_WAKEPKTEVENT	0x10
+#define STE_WAKEEVENT_MAGICPKTEVENT	0x20
+#define STE_WAKEEVENT_LINKEVENT		0x40
+#define STE_WAKEEVENT_WAKEONLAN_ENB	0x80
+
+#define STE_TXSTATUS_RECLAIMERR		0x02
+#define STE_TXSTATUS_STATSOFLOW		0x04
+#define STE_TXSTATUS_EXCESSCOLLS	0x08
+#define STE_TXSTATUS_UNDERRUN		0x10
+#define STE_TXSTATUS_TXINTR_REQ		0x40
+#define STE_TXSTATUS_TXDONE		0x80
+
+#define STE_ISRACK_INTLATCH		0x0001
+#define STE_ISRACK_HOSTERR		0x0002
+#define STE_ISRACK_TX_DONE		0x0004
+#define STE_ISRACK_MACCTL_FRAME		0x0008
+#define STE_ISRACK_RX_DONE		0x0010
+#define STE_ISRACK_RX_EARLY		0x0020
+#define STE_ISRACK_SOFTINTR		0x0040
+#define STE_ISRACK_STATS_OFLOW		0x0080
+#define STE_ISRACK_LINKEVENT		0x0100
+#define STE_ISRACK_TX_DMADONE		0x0200
+#define STE_ISRACK_RX_DMADONE		0x0400
+
+#define STE_IMR_HOSTERR			0x0002
+#define STE_IMR_TX_DONE			0x0004
+#define STE_IMR_MACCTL_FRAME		0x0008
+#define STE_IMR_RX_DONE			0x0010
+#define STE_IMR_RX_EARLY		0x0020
+#define STE_IMR_SOFTINTR		0x0040
+#define STE_IMR_STATS_OFLOW		0x0080
+#define STE_IMR_LINKEVENT		0x0100
+#define STE_IMR_TX_DMADONE		0x0200
+#define STE_IMR_RX_DMADONE		0x0400
+
+#define STE_INTRS					\
+	(STE_IMR_RX_DMADONE|STE_IMR_TX_DMADONE|STE_IMR_STATS_OFLOW|	\
+	STE_IMR_TX_DONE|STE_IMR_HOSTERR|STE_IMR_RX_EARLY)
+
+#define STE_ISR_INTLATCH		0x0001
+#define STE_ISR_HOSTERR			0x0002
+#define STE_ISR_TX_DONE			0x0004
+#define STE_ISR_MACCTL_FRAME		0x0008
+#define STE_ISR_RX_DONE			0x0010
+#define STE_ISR_RX_EARLY		0x0020
+#define STE_ISR_SOFTINTR		0x0040
+#define STE_ISR_STATS_OFLOW		0x0080
+#define STE_ISR_LINKEVENT		0x0100
+#define STE_ISR_TX_DMADONE		0x0200
+#define STE_ISR_RX_DMADONE		0x0400
+
+/*
+ * Note: the Sundance manual gives the impression that the's
+ * only one 32-bit MACCTL register. In fact, there are two
+ * 16-bit registers side by side, and you have to access them
+ * separately.
+ */
+#define STE_MACCTL0_IPG			0x0003
+#define STE_MACCTL0_FULLDUPLEX		0x0020
+#define STE_MACCTL0_RX_GIANTS		0x0040
+#define STE_MACCTL0_FLOWCTL_ENABLE	0x0100
+#define STE_MACCTL0_RX_FCS		0x0200
+#define STE_MACCTL0_FIFOLOOPBK		0x0400
+#define STE_MACCTL0_MACLOOPBK		0x0800
+
+#define STE_MACCTL1_COLLDETECT		0x0001
+#define STE_MACCTL1_CARRSENSE		0x0002
+#define STE_MACCTL1_TX_BUSY		0x0004
+#define STE_MACCTL1_TX_ERROR		0x0008
+#define STE_MACCTL1_STATS_ENABLE	0x0020
+#define STE_MACCTL1_STATS_DISABLE	0x0040
+#define STE_MACCTL1_STATS_ENABLED	0x0080
+#define STE_MACCTL1_TX_ENABLE		0x0100
+#define STE_MACCTL1_TX_DISABLE		0x0200
+#define STE_MACCTL1_TX_ENABLED		0x0400
+#define STE_MACCTL1_RX_ENABLE		0x0800
+#define STE_MACCTL1_RX_DISABLE		0x1000
+#define STE_MACCTL1_RX_ENABLED		0x2000
+#define STE_MACCTL1_PAUSED		0x4000
+
+#define STE_IPG_96BT			0x00000000
+#define STE_IPG_128BT			0x00000001
+#define STE_IPG_224BT			0x00000002
+#define STE_IPG_544BT			0x00000003
+
+#define STE_RXMODE_UNICAST		0x01
+#define STE_RXMODE_ALLMULTI		0x02
+#define STE_RXMODE_BROADCAST		0x04
+#define STE_RXMODE_PROMISC		0x08
+#define STE_RXMODE_MULTIHASH		0x10
+#define STE_RXMODE_ALLIPMULTI		0x20
+
+#define STE_PHYCTL_MCLK			0x01
+#define STE_PHYCTL_MDATA		0x02
+#define STE_PHYCTL_MDIR			0x04
+#define STE_PHYCTL_CLK25_DISABLE	0x08
+#define STE_PHYCTL_DUPLEXPOLARITY	0x10
+#define STE_PHYCTL_DUPLEXSTAT		0x20
+#define STE_PHYCTL_SPEEDSTAT		0x40
+#define STE_PHYCTL_LINKSTAT		0x80
+
+/*
+ * EEPROM offsets.
+ */
+#define STE_EEADDR_CONFIGPARM		0x00
+#define STE_EEADDR_ASICCTL		0x02
+#define STE_EEADDR_SUBSYS_ID		0x04
+#define STE_EEADDR_SUBVEN_ID		0x08
+
+#define STE_EEADDR_NODE0		0x10
+#define STE_EEADDR_NODE1		0x12
+#define STE_EEADDR_NODE2		0x14
+
+/* PCI registers */
+#define STE_PCI_VENDOR_ID		0x00
+#define STE_PCI_DEVICE_ID		0x02
+#define STE_PCI_COMMAND			0x04
+#define STE_PCI_STATUS			0x06
+#define STE_PCI_CLASSCODE		0x09
+#define STE_PCI_LATENCY_TIMER		0x0D
+#define STE_PCI_HEADER_TYPE		0x0E
+#define STE_PCI_LOIO			0x10
+#define STE_PCI_LOMEM			0x14
+#define STE_PCI_BIOSROM			0x30
+#define STE_PCI_INTLINE			0x3C
+#define STE_PCI_INTPIN			0x3D
+#define STE_PCI_MINGNT			0x3E
+#define STE_PCI_MINLAT			0x0F
+
+#define STE_PCI_CAPID			0x50 /* 8 bits */
+#define STE_PCI_NEXTPTR			0x51 /* 8 bits */
+#define STE_PCI_PWRMGMTCAP		0x52 /* 16 bits */
+#define STE_PCI_PWRMGMTCTRL		0x54 /* 16 bits */
+
+#define STE_PSTATE_MASK			0x0003
+#define STE_PSTATE_D0			0x0000
+#define STE_PSTATE_D1			0x0002
+#define STE_PSTATE_D2			0x0002
+#define STE_PSTATE_D3			0x0003
+#define STE_PME_EN			0x0010
+#define STE_PME_STATUS			0x8000
+
+
+struct ste_stats {
+	u_int32_t		ste_rx_bytes;
+	u_int32_t		ste_tx_bytes;
+	u_int16_t		ste_tx_frames;
+	u_int16_t		ste_rx_frames;
+	u_int8_t		ste_carrsense_errs;
+	u_int8_t		ste_late_colls;
+	u_int8_t		ste_multi_colls;
+	u_int8_t		ste_single_colls;
+	u_int8_t		ste_tx_frames_defered;
+	u_int8_t		ste_rx_lost_frames;
+	u_int8_t		ste_tx_excess_defers;
+	u_int8_t		ste_tx_abort_excess_colls;
+	u_int8_t		ste_tx_bcast_frames;
+	u_int8_t		ste_rx_bcast_frames;
+	u_int8_t		ste_tx_mcast_frames;
+	u_int8_t		ste_rx_mcast_frames;
+};
+
+struct ste_frag {
+	u_int32_t		ste_addr;
+	u_int32_t		ste_len;
+};
+
+#define STE_FRAG_LAST		0x80000000
+#define STE_FRAG_LEN		0x00001FFF
+
+#define STE_MAXFRAGS	63
+
+struct ste_desc {
+	u_int32_t		ste_next;
+	u_int32_t		ste_ctl;
+	struct ste_frag		ste_frags[STE_MAXFRAGS];
+};
+
+struct ste_desc_onefrag {
+	u_int32_t		ste_next;
+	u_int32_t		ste_status;
+	struct ste_frag		ste_frag;
+};
+
+#define STE_TXCTL_WORDALIGN	0x00000003
+#define STE_TXCTL_FRAMEID	0x000003FC
+#define STE_TXCTL_NOCRC		0x00002000
+#define STE_TXCTL_TXINTR	0x00008000
+#define STE_TXCTL_DMADONE	0x00010000
+#define STE_TXCTL_DMAINTR	0x80000000
+
+#define STE_RXSTAT_FRAMELEN	0x00001FFF
+#define STE_RXSTAT_FRAME_ERR	0x00004000
+#define STE_RXSTAT_DMADONE	0x00008000
+#define STE_RXSTAT_FIFO_OFLOW	0x00010000
+#define STE_RXSTAT_RUNT		0x00020000
+#define STE_RXSTAT_ALIGNERR	0x00040000
+#define STE_RXSTAT_CRCERR	0x00080000
+#define STE_RXSTAT_GIANT	0x00100000
+#define STE_RXSTAT_DRIBBLEBITS	0x00800000
+#define STE_RXSTAT_DMA_OFLOW	0x01000000
+#define STE_RXATAT_ONEBUF	0x10000000
+
+/*
+ * register space access macros
+ */
+#define CSR_WRITE_4(sc, reg, val)	\
+	bus_space_write_4(sc->ste_btag, sc->ste_bhandle, reg, val)
+#define CSR_WRITE_2(sc, reg, val)	\
+	bus_space_write_2(sc->ste_btag, sc->ste_bhandle, reg, val)
+#define CSR_WRITE_1(sc, reg, val)	\
+	bus_space_write_1(sc->ste_btag, sc->ste_bhandle, reg, val)
+
+#define CSR_READ_4(sc, reg)		\
+	bus_space_read_4(sc->ste_btag, sc->ste_bhandle, reg)
+#define CSR_READ_2(sc, reg)		\
+	bus_space_read_2(sc->ste_btag, sc->ste_bhandle, reg)
+#define CSR_READ_1(sc, reg)		\
+	bus_space_read_1(sc->ste_btag, sc->ste_bhandle, reg)
+
+#define STE_TIMEOUT	1000
+#define STE_MIN_FRAMELEN 60
+#define STE_PACKET_SIZE 1536
+#define ETHER_ALIGN 2
+#define STE_RX_LIST_CNT 128
+#define STE_TX_LIST_CNT 256
+
+struct ste_type {
+	u_int16_t		ste_vid;
+	u_int16_t		ste_did;
+	char			*ste_name;
+};
+
+struct ste_list_data {
+	struct ste_desc_onefrag	ste_rx_list[STE_RX_LIST_CNT];
+	struct ste_desc		ste_tx_list[STE_TX_LIST_CNT];
+	u_int8_t		ste_pad[STE_MIN_FRAMELEN];
+};
+
+struct ste_chain {
+	struct ste_desc		*ste_ptr;
+	struct mbuf		*ste_mbuf;
+	struct ste_chain	*ste_next;
+};
+
+struct ste_chain_onefrag {
+	struct ste_desc_onefrag	*ste_ptr;
+	struct mbuf		*ste_mbuf;
+	struct ste_chain_onefrag	*ste_next;
+};
+
+struct ste_chain_data {
+	struct ste_chain_onefrag ste_rx_chain[STE_RX_LIST_CNT];
+	struct ste_chain	 ste_tx_chain[STE_TX_LIST_CNT];
+	struct ste_chain_onefrag *ste_rx_head;
+
+	struct ste_chain	*ste_tx_head;
+	struct ste_chain	*ste_tx_tail;
+	struct ste_chain	*ste_tx_free;
+};
+
+struct ste_softc {
+	struct device		sc_dev;
+	void			*sc_ih;
+	struct arpcom		arpcom;
+	mii_data_t		sc_mii;
+	bus_space_tag_t		ste_btag;
+	bus_space_handle_t	ste_bhandle;
+	int			ste_unit;
+	int			ste_tx_thresh;
+	struct ste_list_data	*ste_ldata;
+	caddr_t			ste_ldata_ptr;
+	struct ste_chain_data	ste_cdata;
+};
+
+struct ste_mii_frame {
+	u_int8_t		mii_stdelim;
+	u_int8_t		mii_opcode;
+	u_int8_t		mii_phyaddr;
+	u_int8_t		mii_regaddr;
+	u_int8_t		mii_turnaround;
+	u_int16_t		mii_data;
+};
+
+/*
+ * MII constants
+ */
+#define STE_MII_STARTDELIM	0x01
+#define STE_MII_READOP		0x02
+#define STE_MII_WRITEOP		0x01
+#define STE_MII_TURNAROUND	0x02
+
+#ifdef __alpha__
+#undef vtophys
+#define vtophys(va)		alpha_XXX_dmamap((vm_offset_t)va)
+#endif