Update the inteldrm driver to drm git.

changes:
- Support for intel 4 series chipsets (i'll do any relavent agp bits for
these as soon as i grab the datasheet and find a testcase)
- fix scheduled buffer swaps on non 965 chipsets
- major reorder, dedup and general cleanup of register definition and
the header file

Tested by a few, no regressions

3 files changed, 1229 insertions, 713 deletions

diff --git a/sys/dev/pci/drm/i915_dma.c b/sys/dev/pci/drm/i915_dma.c
index 60b405d471a..27d152cb727 100644
--- a/sys/dev/pci/drm/i915_dma.c
+++ b/sys/dev/pci/drm/i915_dma.c
@@ -40,11 +40,11 @@ int i915_wait_ring(struct drm_device * dev, int n, const char *caller)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	drm_i915_ring_buffer_t *ring = &(dev_priv->ring);
-	u32 last_head = I915_READ(LP_RING + RING_HEAD) & HEAD_ADDR;
+	u32 last_head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
 	int i;
 
 	for (i = 0; i < 10000; i++) {
-		ring->head = I915_READ(LP_RING + RING_HEAD) & HEAD_ADDR;
+		ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
 		ring->space = ring->head - (ring->tail + 8);
 		if (ring->space < 0)
 			ring->space += ring->Size;
@@ -66,8 +66,8 @@ void i915_kernel_lost_context(struct drm_device * dev)
 	drm_i915_private_t *dev_priv = dev->dev_private;
 	drm_i915_ring_buffer_t *ring = &(dev_priv->ring);
 
-	ring->head = I915_READ(LP_RING + RING_HEAD) & HEAD_ADDR;
-	ring->tail = I915_READ(LP_RING + RING_TAIL) & TAIL_ADDR;
+	ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
+	ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
 	ring->space = ring->head - (ring->tail + 8);
 	if (ring->space < 0)
 		ring->space += ring->Size;
@@ -516,7 +516,7 @@ void i915_emit_breadcrumb(struct drm_device *dev)
 		dev_priv->sarea_priv->last_enqueue = dev_priv->counter;
 
 	BEGIN_LP_RING(4);
-	OUT_RING(CMD_STORE_DWORD_IDX);
+	OUT_RING(MI_STORE_DWORD_INDEX);
 	OUT_RING(20);
 	OUT_RING(dev_priv->counter);
 	OUT_RING(0);
@@ -527,7 +527,7 @@ void i915_emit_breadcrumb(struct drm_device *dev)
 int i915_emit_mi_flush(struct drm_device *dev, uint32_t flush)
 {
 	drm_i915_private_t *dev_priv = dev->dev_private;
-	uint32_t flush_cmd = CMD_MI_FLUSH;
+	uint32_t flush_cmd = MI_FLUSH;
 	RING_LOCALS;
 
 	flush_cmd |= flush;
@@ -999,7 +999,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 	dev_priv->hw_status_page = dev_priv->hws_map.handle;
 
 	memset(dev_priv->hw_status_page, 0, PAGE_SIZE);
-	I915_WRITE(0x02080, dev_priv->status_gfx_addr);
+	I915_WRITE(HWS_PGA, dev_priv->status_gfx_addr);
 	DRM_DEBUG("load hws 0x2080 with gfx mem 0x%x\n",
 			dev_priv->status_gfx_addr);
 	DRM_DEBUG("load hws at %p\n", dev_priv->hw_status_page);
@@ -1008,7 +1008,7 @@ static int i915_set_status_page(struct drm_device *dev, void *data,
 
 int i915_driver_load(struct drm_device *dev, unsigned long flags)
 {
-	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct drm_i915_private *dev_priv;
 	unsigned long base, size;
 	int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1;
 
diff --git a/sys/dev/pci/drm/i915_drv.h b/sys/dev/pci/drm/i915_drv.h
index 6421f689c46..fa3305baaa2 100644
--- a/sys/dev/pci/drm/i915_drv.h
+++ b/sys/dev/pci/drm/i915_drv.h
@@ -67,6 +67,11 @@
 #endif
 #define DRIVER_PATCHLEVEL	0
 
+enum pipe {
+    PIPE_A = 0,
+    PIPE_B,
+};
+
 #ifdef I915_HAVE_BUFFER
 #define I915_MAX_VALIDATE_BUFFERS 4096
 struct drm_i915_validate_buffer;
@@ -177,7 +182,7 @@ typedef struct drm_i915_private {
 	u32 saveDSPASTRIDE;
 	u32 saveDSPASIZE;
 	u32 saveDSPAPOS;
-	u32 saveDSPABASE;
+	u32 saveDSPAADDR;
 	u32 saveDSPASURF;
 	u32 saveDSPATILEOFF;
 	u32 savePFIT_PGM_RATIOS;
@@ -198,24 +203,24 @@ typedef struct drm_i915_private {
 	u32 saveDSPBSTRIDE;
 	u32 saveDSPBSIZE;
 	u32 saveDSPBPOS;
-	u32 saveDSPBBASE;
+	u32 saveDSPBADDR;
 	u32 saveDSPBSURF;
 	u32 saveDSPBTILEOFF;
-	u32 saveVCLK_DIVISOR_VGA0;
-	u32 saveVCLK_DIVISOR_VGA1;
-	u32 saveVCLK_POST_DIV;
+	u32 saveVGA0;
+	u32 saveVGA1;
+	u32 saveVGA_PD;
 	u32 saveVGACNTRL;
 	u32 saveADPA;
 	u32 saveLVDS;
-	u32 saveLVDSPP_ON;
-	u32 saveLVDSPP_OFF;
+	u32 savePP_ON_DELAYS;
+	u32 savePP_OFF_DELAYS;
 	u32 saveDVOA;
 	u32 saveDVOB;
 	u32 saveDVOC;
 	u32 savePP_ON;
 	u32 savePP_OFF;
 	u32 savePP_CONTROL;
-	u32 savePP_CYCLE;
+	u32 savePP_DIVISOR;
 	u32 savePFIT_CONTROL;
 	u32 save_palette_a[256];
 	u32 save_palette_b[256];
@@ -228,7 +233,7 @@ typedef struct drm_i915_private {
 	u32 saveIMR;
 	u32 saveCACHE_MODE_0;
 	u32 saveD_STATE;
-	u32 saveDSPCLK_GATE_D;
+	u32 saveCG_2D_DIS;
 	u32 saveMI_ARB_STATE;
 	u32 saveSWF0[16];
 	u32 saveSWF1[16];
@@ -307,6 +312,11 @@ extern void i915_mem_takedown(struct mem_block **heap);
 extern void i915_mem_release(struct drm_device * dev,
 			     struct drm_file *file_priv,
 			     struct mem_block *heap);
+
+/* i915_suspend.c */
+extern int i915_save_state(struct drm_device *dev);
+extern int i915_restore_state(struct drm_device *dev);
+
 #ifdef I915_HAVE_FENCE
 /* i915_fence.c */
 extern void i915_fence_handler(struct drm_device *dev);
@@ -343,9 +353,17 @@ extern void intel_fini_chipset_flush_compat(struct drm_device *dev);
 #define I915_WRITE(reg,val)     DRM_WRITE32(dev_priv->mmio_map, (reg), (val))
 #define I915_READ16(reg)	DRM_READ16(dev_priv->mmio_map, (reg))
 #define I915_WRITE16(reg,val)	DRM_WRITE16(dev_priv->mmio_map, (reg), (val))
+#define I915_READ8(reg)		DRM_READ8(dev_priv->mmio_map, (reg))
+#define I915_WRITE8(reg,val)	DRM_WRITE8(dev_priv->mmio_map, (reg), (val))
+
+#if defined(__FreeBSD__)
+typedef boolean_t bool;
+#endif
 
 #define I915_VERBOSE 0
 
+#define PRIMARY_RINGBUFFER_SIZE         (128*1024)
+
 #define RING_LOCALS	unsigned int outring, ringmask, outcount; \
 			volatile char *virt;
 
@@ -373,13 +391,46 @@ extern void intel_fini_chipset_flush_compat(struct drm_device *dev);
 	if (I915_VERBOSE) DRM_DEBUG("ADVANCE_LP_RING %x\n", outring);	\
 	dev_priv->ring.tail = outring;					\
 	dev_priv->ring.space -= outcount * 4;				\
-	I915_WRITE(LP_RING + RING_TAIL, outring);			\
+	I915_WRITE(PRB0_TAIL, outring);			\
 } while(0)
 
 extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 
-/* Extended config space */
-#define LBB 0xf4
+/*
+ * The Bridge device's PCI config space has information about the
+ * fb aperture size and the amount of pre-reserved memory.
+ */
+#define INTEL_GMCH_CTRL		0x52
+#define INTEL_GMCH_ENABLED	0x4
+#define INTEL_GMCH_MEM_MASK	0x1
+#define INTEL_GMCH_MEM_64M	0x1
+#define INTEL_GMCH_MEM_128M	0
+
+#define INTEL_855_GMCH_GMS_MASK		(0x7 << 4)
+#define INTEL_855_GMCH_GMS_DISABLED	(0x0 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_1M	(0x1 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_4M	(0x2 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_8M	(0x3 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_16M	(0x4 << 4)
+#define INTEL_855_GMCH_GMS_STOLEN_32M	(0x5 << 4)
+
+#define INTEL_915G_GMCH_GMS_STOLEN_48M	(0x6 << 4)
+#define INTEL_915G_GMCH_GMS_STOLEN_64M	(0x7 << 4)
+
+/* PCI config space */
+
+#define HPLLCC	0xc0 /* 855 only */
+#define   GC_CLOCK_CONTROL_MASK		(3 << 0)
+#define   GC_CLOCK_133_200		(0 << 0)
+#define   GC_CLOCK_100_200		(1 << 0)
+#define   GC_CLOCK_100_133		(2 << 0)
+#define   GC_CLOCK_166_250		(3 << 0)
+#define GCFGC	0xf0 /* 915+ only */
+#define   GC_LOW_FREQUENCY_ENABLE	(1 << 7)
+#define   GC_DISPLAY_CLOCK_190_200_MHZ	(0 << 4)
+#define   GC_DISPLAY_CLOCK_333_MHZ	(4 << 4)
+#define   GC_DISPLAY_CLOCK_MASK		(7 << 4)
+#define LBB	0xf4
 
 /* VGA stuff */
 
@@ -422,30 +473,167 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define VGA_CR_INDEX_CGA 0x3d4
 #define VGA_CR_DATA_CGA 0x3d5
 
-#define GFX_OP_USER_INTERRUPT		((0<<29)|(2<<23))
-#define GFX_OP_BREAKPOINT_INTERRUPT	((0<<29)|(1<<23))
-#define CMD_REPORT_HEAD			(7<<23)
-#define CMD_STORE_DWORD_IMM             ((0x20<<23) | (0x1 << 22) | 0x1)
-#define CMD_STORE_DWORD_IDX		((0x21<<23) | 0x1)
-#define CMD_OP_BATCH_BUFFER  ((0x0<<29)|(0x30<<23)|0x1)
-
-#define CMD_MI_FLUSH         (0x04 << 23)
-#define MI_NO_WRITE_FLUSH    (1 << 2)
-#define MI_READ_FLUSH        (1 << 0)
-#define MI_EXE_FLUSH         (1 << 1)
-#define MI_END_SCENE         (1 << 4) /* flush binner and incr scene count */
-#define MI_SCENE_COUNT       (1 << 3) /* just increment scene count */
-
-/* Packet to load a register value from the ring/batch command stream:
+/*
+ * Memory interface instructions used by the kernel
+ */
+#define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags))
+
+#define MI_NOOP			MI_INSTR(0, 0)
+#define MI_USER_INTERRUPT	MI_INSTR(0x02, 0)
+#define MI_WAIT_FOR_EVENT       MI_INSTR(0x03, 0)
+#define   MI_WAIT_FOR_PLANE_B_FLIP      (1<<6)
+#define   MI_WAIT_FOR_PLANE_A_FLIP      (1<<2)
+#define   MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1)
+#define MI_FLUSH		MI_INSTR(0x04, 0)
+#define   MI_READ_FLUSH		(1 << 0)
+#define   MI_EXE_FLUSH		(1 << 1)
+#define   MI_NO_WRITE_FLUSH	(1 << 2)
+#define   MI_SCENE_COUNT	(1 << 3) /* just increment scene count */
+#define   MI_END_SCENE		(1 << 4) /* flush binner and incr scene count */
+#define MI_BATCH_BUFFER_END	MI_INSTR(0x0a, 0)
+#define MI_REPORT_HEAD		MI_INSTR(0x07, 0)
+#define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0)
+#define MI_STORE_DWORD_IMM	MI_INSTR(0x20, 1)
+#define   MI_MEM_VIRTUAL	(1 << 22) /* 965+ only */
+#define MI_STORE_DWORD_INDEX	MI_INSTR(0x21, 1)
+#define MI_LOAD_REGISTER_IMM	MI_INSTR(0x22, 1)
+#define MI_BATCH_BUFFER		MI_INSTR(0x30, 1)
+#define   MI_BATCH_NON_SECURE	(1)
+#define   MI_BATCH_NON_SECURE_I965 (1<<8)
+#define MI_BATCH_BUFFER_START	MI_INSTR(0x31, 0)
+
+#define BREADCRUMB_BITS 31
+#define BREADCRUMB_MASK ((1U << BREADCRUMB_BITS) - 1)
+
+#define READ_BREADCRUMB(dev_priv)  (((volatile u32*)(dev_priv->hw_status_page))[5])
+
+/**
+ * Reads a dword out of the status page, which is written to from the command
+ * queue by automatic updates, MI_REPORT_HEAD, MI_STORE_DATA_INDEX, or
+ * MI_STORE_DATA_IMM.
+ *
+ * The following dwords have a reserved meaning:
+ * 0: ISR copy, updated when an ISR bit not set in the HWSTAM changes.
+ * 4: ring 0 head pointer
+ * 5: ring 1 head pointer (915-class)
+ * 6: ring 2 head pointer (915-class)
+ *
+ * The area from dword 0x10 to 0x3ff is available for driver usage.
+ */
+#define READ_HWSP(dev_priv, reg)  (((volatile u32*)(dev_priv->hw_status_page))[reg])
+#define I915_GEM_HWS_INDEX		0x10
+
+/*
+ * 3D instructions used by the kernel
+ */
+#define GFX_INSTR(opcode, flags) ((0x3 << 29) | ((opcode) << 24) | (flags))
+
+#define GFX_OP_RASTER_RULES    ((0x3<<29)|(0x7<<24))
+#define GFX_OP_SCISSOR         ((0x3<<29)|(0x1c<<24)|(0x10<<19))
+#define   SC_UPDATE_SCISSOR       (0x1<<1)
+#define   SC_ENABLE_MASK          (0x1<<0)
+#define   SC_ENABLE               (0x1<<0)
+#define GFX_OP_LOAD_INDIRECT   ((0x3<<29)|(0x1d<<24)|(0x7<<16))
+#define GFX_OP_SCISSOR_INFO    ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1))
+#define   SCI_YMIN_MASK      (0xffff<<16)
+#define   SCI_XMIN_MASK      (0xffff<<0)
+#define   SCI_YMAX_MASK      (0xffff<<16)
+#define   SCI_XMAX_MASK      (0xffff<<0)
+#define GFX_OP_SCISSOR_ENABLE	 ((0x3<<29)|(0x1c<<24)|(0x10<<19))
+#define GFX_OP_SCISSOR_RECT	 ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1)
+#define GFX_OP_COLOR_FACTOR      ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0)
+#define GFX_OP_STIPPLE           ((0x3<<29)|(0x1d<<24)|(0x83<<16))
+#define GFX_OP_MAP_INFO          ((0x3<<29)|(0x1d<<24)|0x4)
+#define GFX_OP_DESTBUFFER_VARS   ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0)
+#define GFX_OP_DRAWRECT_INFO     ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3))
+#define GFX_OP_DRAWRECT_INFO_I965  ((0x7900<<16)|0x2)
+#define SRC_COPY_BLT_CMD                ((2<<29)|(0x43<<22)|4)
+#define XY_SRC_COPY_BLT_CMD		((2<<29)|(0x53<<22)|6)
+#define XY_MONO_SRC_COPY_IMM_BLT	((2<<29)|(0x71<<22)|5)
+#define XY_SRC_COPY_BLT_WRITE_ALPHA	(1<<21)
+#define XY_SRC_COPY_BLT_WRITE_RGB	(1<<20)
+#define   BLT_DEPTH_8			(0<<24)
+#define   BLT_DEPTH_16_565		(1<<24)
+#define   BLT_DEPTH_16_1555		(2<<24)
+#define   BLT_DEPTH_32			(3<<24)
+#define   BLT_ROP_GXCOPY		(0xcc<<16)
+#define XY_SRC_COPY_BLT_SRC_TILED	(1<<15) /* 965+ only */
+#define XY_SRC_COPY_BLT_DST_TILED	(1<<11) /* 965+ only */
+#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2)
+#define   ASYNC_FLIP                (1<<22)
+#define   DISPLAY_PLANE_A           (0<<20)
+#define   DISPLAY_PLANE_B           (1<<20)
+
+/*
+ * Instruction and interrupt control regs
  */
-#define CMD_MI_LOAD_REGISTER_IMM	((0x22 << 23)|0x1)
 
-#define BB1_START_ADDR_MASK   (~0x7)
-#define BB1_PROTECTED         (1<<0)
-#define BB1_UNPROTECTED       (0<<0)
-#define BB2_END_ADDR_MASK     (~0x7)
+#define PRB0_TAIL	0x02030
+#define PRB0_HEAD	0x02034
+#define PRB0_START	0x02038
+#define PRB0_CTL	0x0203c
+#define   TAIL_ADDR		0x001FFFF8
+#define   HEAD_WRAP_COUNT	0xFFE00000
+#define   HEAD_WRAP_ONE		0x00200000
+#define   HEAD_ADDR		0x001FFFFC
+#define   RING_NR_PAGES		0x001FF000
+#define   RING_REPORT_MASK	0x00000006
+#define   RING_REPORT_64K	0x00000002
+#define   RING_REPORT_128K	0x00000004
+#define   RING_NO_REPORT	0x00000000
+#define   RING_VALID_MASK	0x00000001
+#define   RING_VALID		0x00000001
+#define   RING_INVALID		0x00000000
+#define PRB1_TAIL	0x02040 /* 915+ only */
+#define PRB1_HEAD	0x02044 /* 915+ only */
+#define PRB1_START	0x02048 /* 915+ only */
+#define PRB1_CTL	0x0204c /* 915+ only */
+#define HWS_PGA		0x02080
+#define IPEIR		0x02088
+#define NOPID		0x02094
+#define HWSTAM		0x02098
+#define SCPD0		0x0209c /* 915+ only */
+#define IER		0x020a0
+#define IIR		0x020a4
+#define IMR		0x020a8
+#define ISR		0x020ac
+#define   I915_PIPE_CONTROL_NOTIFY_INTERRUPT		(1<<18)
+#define   I915_DISPLAY_PORT_INTERRUPT			(1<<17)
+#define   I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT	(1<<15)
+#define   I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT	(1<<14)
+#define   I915_HWB_OOM_INTERRUPT			(1<<13)
+#define   I915_SYNC_STATUS_INTERRUPT			(1<<12)
+#define   I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT	(1<<11)
+#define   I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT	(1<<10)
+#define   I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT	(1<<9)
+#define   I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT	(1<<8)
+#define   I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT		(1<<7)
+#define   I915_DISPLAY_PIPE_A_EVENT_INTERRUPT		(1<<6)
+#define   I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT		(1<<5)
+#define   I915_DISPLAY_PIPE_B_EVENT_INTERRUPT		(1<<4)
+#define   I915_DEBUG_INTERRUPT				(1<<2)
+#define   I915_USER_INTERRUPT				(1<<1)
+#define EIR		0x020b0
+#define EMR		0x020b4
+#define ESR		0x020b8
+#define INSTPM	        0x020c0
+#define FW_BLC		0x020d8
+#define FW_BLC_SELF	0x020e0 /* 915+ only */
+#define MI_ARB_STATE	0x020e4 /* 915+ only */
+#define CACHE_MODE_0	0x02120 /* 915+ only */
+#define   CM0_MASK_SHIFT          16
+#define   CM0_IZ_OPT_DISABLE      (1<<6)
+#define   CM0_ZR_OPT_DISABLE      (1<<5)
+#define   CM0_DEPTH_EVICT_DISABLE (1<<4)
+#define   CM0_COLOR_EVICT_DISABLE (1<<3)
+#define   CM0_DEPTH_WRITE_DISABLE (1<<1)
+#define   CM0_RC_OP_FLUSH_DISABLE (1<<0)
+#define GFX_FLSH_CNTL	0x02170 /* 915+ only */
+
+/*
+ * Framebuffer compression (915+ only)
+ */
 
-/* Framebuffer compression */
 #define FBC_CFB_BASE		0x03200 /* 4k page aligned */
 #define FBC_LL_BASE		0x03204 /* 4k page aligned */
 #define FBC_CONTROL		0x03208
@@ -474,69 +662,64 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define FBC_FENCE_OFF		0x0321b
 
 #define FBC_LL_SIZE		(1536)
-#define FBC_LL_PAD		(32)
 
-/* Interrupt bits:
+/*
+ * GPIO regs
  */
-#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT		(1<<18)
-#define I915_DISPLAY_PORT_INTERRUPT			(1<<17)
-#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT	(1<<15)
-#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT	(1<<14)
-#define I915_HWB_OOM_INTERRUPT				(1<<13) /* binner out of memory */
-#define I915_SYNC_STATUS_INTERRUPT			(1<<12)
-#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT	(1<<11)
-#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT	(1<<10)
-#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT	(1<<9)
-#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT	(1<<8)
-#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT		(1<<7)
-#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT		(1<<6)
-#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT		(1<<5)
-#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT		(1<<4)
-#define I915_DEBUG_INTERRUPT				(1<<2)
-#define I915_USER_INTERRUPT				(1<<1)
-
-
-#define I915REG_HWSTAM		0x02098
-#define I915REG_INT_IDENTITY_R	0x020a4
-#define I915REG_INT_MASK_R	0x020a8
-#define I915REG_INT_ENABLE_R	0x020a0
-#define I915REG_INSTPM	        0x020c0
 
-#define PIPEADSL		0x70000
-#define PIPEBDSL		0x71000
+#define GPIOA			0x5010
+#define GPIOB			0x5014
+#define GPIOC			0x5018
+#define GPIOD			0x501c
+#define GPIOE			0x5020
+#define GPIOF			0x5024
+#define GPIOG			0x5028
+#define GPIOH			0x502c
+# define GPIO_CLOCK_DIR_MASK		(1 << 0)
+# define GPIO_CLOCK_DIR_IN		(0 << 1)
+# define GPIO_CLOCK_DIR_OUT		(1 << 1)
+# define GPIO_CLOCK_VAL_MASK		(1 << 2)
+# define GPIO_CLOCK_VAL_OUT		(1 << 3)
+# define GPIO_CLOCK_VAL_IN		(1 << 4)
+# define GPIO_CLOCK_PULLUP_DISABLE	(1 << 5)
+# define GPIO_DATA_DIR_MASK		(1 << 8)
+# define GPIO_DATA_DIR_IN		(0 << 9)
+# define GPIO_DATA_DIR_OUT		(1 << 9)
+# define GPIO_DATA_VAL_MASK		(1 << 10)
+# define GPIO_DATA_VAL_OUT		(1 << 11)
+# define GPIO_DATA_VAL_IN		(1 << 12)
+# define GPIO_DATA_PULLUP_DISABLE	(1 << 13)
 
-#define I915REG_PIPEASTAT	0x70024
-#define I915REG_PIPEBSTAT	0x71024
 /*
- * The two pipe frame counter registers are not synchronized, so
- * reading a stable value is somewhat tricky. The following code 
- * should work:
- *
- *  do {
- *    high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
- *             PIPE_FRAME_HIGH_SHIFT;
- *    low1 =  ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >>
- *             PIPE_FRAME_LOW_SHIFT);
- *    high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
- *             PIPE_FRAME_HIGH_SHIFT);
- *  } while (high1 != high2);
- *  frame = (high1 << 8) | low1;
+ * Clock control & power management
  */
-#define PIPEAFRAMEHIGH          0x70040
-#define PIPEBFRAMEHIGH		0x71040
-#define PIPE_FRAME_HIGH_MASK    0x0000ffff
-#define PIPE_FRAME_HIGH_SHIFT   0
-#define PIPEAFRAMEPIXEL         0x70044
-#define PIPEBFRAMEPIXEL		0x71044
 
-#define PIPE_FRAME_LOW_MASK     0xff000000
-#define PIPE_FRAME_LOW_SHIFT    24
-/*
- * Pixel within the current frame is counted in the PIPEAFRAMEPIXEL register
- * and is 24 bits wide.
- */
-#define PIPE_PIXEL_MASK         0x00ffffff
-#define PIPE_PIXEL_SHIFT        0
+#define VGA0	0x6000
+#define VGA1	0x6004
+#define VGA_PD	0x6010
+#define   VGA0_PD_P2_DIV_4	(1 << 7)
+#define   VGA0_PD_P1_DIV_2	(1 << 5)
+#define   VGA0_PD_P1_SHIFT	0
+#define   VGA0_PD_P1_MASK	(0x1f << 0)
+#define   VGA1_PD_P2_DIV_4	(1 << 15)
+#define   VGA1_PD_P1_DIV_2	(1 << 13)
+#define   VGA1_PD_P1_SHIFT	8
+#define   VGA1_PD_P1_MASK	(0x1f << 8)
+#define DPLL_A	0x06014
+#define DPLL_B	0x06018
+#define   DPLL_VCO_ENABLE		(1 << 31)
+#define   DPLL_DVO_HIGH_SPEED		(1 << 30)
+#define   DPLL_SYNCLOCK_ENABLE		(1 << 29)
+#define   DPLL_VGA_MODE_DIS		(1 << 28)
+#define   DPLLB_MODE_DAC_SERIAL		(1 << 26) /* i915 */
+#define   DPLLB_MODE_LVDS		(2 << 26) /* i915 */
+#define   DPLL_MODE_MASK		(3 << 26)
+#define   DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */
+#define   DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */
+#define   DPLLB_LVDS_P2_CLOCK_DIV_14	(0 << 24) /* i915 */
+#define   DPLLB_LVDS_P2_CLOCK_DIV_7	(1 << 24) /* i915 */
+#define   DPLL_P2_CLOCK_DIV_MASK	0x03000000 /* i915 */
+#define   DPLL_FPA01_P1_POST_DIV_MASK	0x00ff0000 /* i915 */
 
 #define I915_FIFO_UNDERRUN_STATUS		(1UL<<31)
 #define I915_CRC_ERROR_ENABLE			(1UL<<29)
@@ -586,13 +769,6 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define ADPA_DPMS_STANDBY	(2<<10)
 #define ADPA_DPMS_OFF		(3<<10)
 
-#define NOPID                   0x2094
-#define LP_RING			0x2030
-#define HP_RING			0x2040
-/* The binner has its own ring buffer:
- */
-#define HWB_RING		0x2400
-
 #define RING_TAIL		0x00
 #define TAIL_ADDR		0x001FFFF8
 #define RING_HEAD		0x04
@@ -611,234 +787,127 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define RING_VALID		0x00000001
 #define RING_INVALID		0x00000000
 
-/* Instruction parser error reg:
- */
-#define IPEIR			0x2088
-
 /* Scratch pad debug 0 reg:
  */
-#define SCPD0			0x209c
-
-/* Error status reg:
+#define   DPLL_FPA01_P1_POST_DIV_MASK_I830	0x001f0000
+/*
+ * The i830 generation, in LVDS mode, defines P1 as the bit number set within
+ * this field (only one bit may be set).
  */
-#define ESR			0x20b8
-
-/* Secondary DMA fetch address debug reg:
+#define   DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS	0x003f0000
+#define   DPLL_FPA01_P1_POST_DIV_SHIFT	16
+/* i830, required in DVO non-gang */
+#define   PLL_P2_DIVIDE_BY_4		(1 << 23)
+#define   PLL_P1_DIVIDE_BY_TWO		(1 << 21) /* i830 */
+#define   PLL_REF_INPUT_DREFCLK		(0 << 13)
+#define   PLL_REF_INPUT_TVCLKINA	(1 << 13) /* i830 */
+#define   PLL_REF_INPUT_TVCLKINBC	(2 << 13) /* SDVO TVCLKIN */
+#define   PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13)
+#define   PLL_REF_INPUT_MASK		(3 << 13)
+#define   PLL_LOAD_PULSE_PHASE_SHIFT		9
+/*
+ * Parallel to Serial Load Pulse phase selection.
+ * Selects the phase for the 10X DPLL clock for the PCIe
+ * digital display port. The range is 4 to 13; 10 or more
+ * is just a flip delay. The default is 6
  */
-#define DMA_FADD_S		0x20d4
-
-/* Memory Interface Arbitration State
+#define   PLL_LOAD_PULSE_PHASE_MASK		(0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
+#define   DISPLAY_RATE_SELECT_FPA1		(1 << 8)
+/*
+ * SDVO multiplier for 945G/GM. Not used on 965.
  */
-#define MI_ARB_STATE		0x20e4
-
-/* Cache mode 0 reg.
- *  - Manipulating render cache behaviour is central
- *    to the concept of zone rendering, tuning this reg can help avoid
- *    unnecessary render cache reads and even writes (for z/stencil)
- *    at beginning and end of scene.
+#define   SDVO_MULTIPLIER_MASK			0x000000ff
+#define   SDVO_MULTIPLIER_SHIFT_HIRES		4
+#define   SDVO_MULTIPLIER_SHIFT_VGA		0
+#define DPLL_A_MD 0x0601c /* 965+ only */
+/*
+ * UDI pixel divider, controlling how many pixels are stuffed into a packet.
  *
- * - To change a bit, write to this reg with a mask bit set and the
- * bit of interest either set or cleared.  EG: (BIT<<16) | BIT to set.
- */
-#define Cache_Mode_0		0x2120
-#define CACHE_MODE_0		0x2120
-#define CM0_MASK_SHIFT          16
-#define CM0_IZ_OPT_DISABLE      (1<<6)
-#define CM0_ZR_OPT_DISABLE      (1<<5)
-#define CM0_DEPTH_EVICT_DISABLE (1<<4)
-#define CM0_COLOR_EVICT_DISABLE (1<<3)
-#define CM0_DEPTH_WRITE_DISABLE (1<<1)
-#define CM0_RC_OP_FLUSH_DISABLE (1<<0)
-
-
-/* Graphics flush control.  A CPU write flushes the GWB of all writes.
- * The data is discarded.
- */
-#define GFX_FLSH_CNTL		0x2170
-
-/* Binner control.  Defines the location of the bin pointer list:
- */
-#define BINCTL			0x2420
-#define BC_MASK			(1 << 9)
-
-/* Binned scene info.
- */
-#define BINSCENE		0x2428
-#define BS_OP_LOAD		(1 << 8)
-#define BS_MASK			(1 << 22)
-
-/* Bin command parser debug reg:
- */
-#define BCPD			0x2480
-
-/* Bin memory control debug reg:
- */
-#define BMCD			0x2484
-
-/* Bin data cache debug reg:
- */
-#define BDCD			0x2488
-
-/* Binner pointer cache debug reg:
- */
-#define BPCD			0x248c
-
-/* Binner scratch pad debug reg:
- */
-#define BINSKPD			0x24f0
-
-/* HWB scratch pad debug reg:
+ * Value is pixels minus 1.  Must be set to 1 pixel for SDVO.
  */
-#define HWBSKPD			0x24f4
-
-/* Binner memory pool reg:
+#define   DPLL_MD_UDI_DIVIDER_MASK		0x3f000000
+#define   DPLL_MD_UDI_DIVIDER_SHIFT		24
+/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
+#define   DPLL_MD_VGA_UDI_DIVIDER_MASK		0x003f0000
+#define   DPLL_MD_VGA_UDI_DIVIDER_SHIFT		16
+/*
+ * SDVO/UDI pixel multiplier.
+ *
+ * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
+ * clock rate is 10 times the DPLL clock.  At low resolution/refresh rate
+ * modes, the bus rate would be below the limits, so SDVO allows for stuffing
+ * dummy bytes in the datastream at an increased clock rate, with both sides of
+ * the link knowing how many bytes are fill.
+ *
+ * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
+ * rate to 130Mhz to get a bus rate of 1.30Ghz.  The DPLL clock rate would be
+ * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
+ * through an SDVO command.
+ *
+ * This register field has values of multiplication factor minus 1, with
+ * a maximum multiplier of 5 for SDVO.
  */
-#define BMP_BUFFER		0x2430
-#define BMP_PAGE_SIZE_4K	(0 << 10)
-#define BMP_BUFFER_SIZE_SHIFT	1
-#define BMP_ENABLE		(1 << 0)
-
-/* Get/put memory from the binner memory pool:
+#define   DPLL_MD_UDI_MULTIPLIER_MASK		0x00003f00
+#define   DPLL_MD_UDI_MULTIPLIER_SHIFT		8
+/*
+ * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
+ * This best be set to the default value (3) or the CRT won't work. No,
+ * I don't entirely understand what this does...
  */
-#define BMP_GET			0x2438
-#define BMP_PUT			0x2440
-#define BMP_OFFSET_SHIFT	5
+#define   DPLL_MD_VGA_UDI_MULTIPLIER_MASK	0x0000003f
+#define   DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT	0
+#define DPLL_B_MD 0x06020 /* 965+ only */
+#define FPA0	0x06040
+#define FPA1	0x06044
+#define FPB0	0x06048
+#define FPB1	0x0604c
+#define   FP_N_DIV_MASK		0x003f0000
+#define   FP_N_DIV_SHIFT		16
+#define   FP_M1_DIV_MASK	0x00003f00
+#define   FP_M1_DIV_SHIFT		 8
+#define   FP_M2_DIV_MASK	0x0000003f
+#define   FP_M2_DIV_SHIFT		 0
+#define DPLL_TEST	0x606c
+#define   DPLLB_TEST_SDVO_DIV_1		(0 << 22)
+#define   DPLLB_TEST_SDVO_DIV_2		(1 << 22)
+#define   DPLLB_TEST_SDVO_DIV_4		(2 << 22)
+#define   DPLLB_TEST_SDVO_DIV_MASK	(3 << 22)
+#define   DPLLB_TEST_N_BYPASS		(1 << 19)
+#define   DPLLB_TEST_M_BYPASS		(1 << 18)
+#define   DPLLB_INPUT_BUFFER_ENABLE	(1 << 16)
+#define   DPLLA_TEST_N_BYPASS		(1 << 3)
+#define   DPLLA_TEST_M_BYPASS		(1 << 2)
+#define   DPLLA_INPUT_BUFFER_ENABLE	(1 << 0)
+#define D_STATE		0x6104
+#define CG_2D_DIS	0x6200
+#define CG_3D_DIS	0x6204
 
-/* 3D state packets:
+/*
+ * Palette regs
  */
-#define GFX_OP_RASTER_RULES    ((0x3<<29)|(0x7<<24))
-
-#define GFX_OP_SCISSOR         ((0x3<<29)|(0x1c<<24)|(0x10<<19))
-#define SC_UPDATE_SCISSOR       (0x1<<1)
-#define SC_ENABLE_MASK          (0x1<<0)
-#define SC_ENABLE               (0x1<<0)
-
-#define GFX_OP_LOAD_INDIRECT   ((0x3<<29)|(0x1d<<24)|(0x7<<16))
-
-#define GFX_OP_SCISSOR_INFO    ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1))
-#define SCI_YMIN_MASK      (0xffff<<16)
-#define SCI_XMIN_MASK      (0xffff<<0)
-#define SCI_YMAX_MASK      (0xffff<<16)
-#define SCI_XMAX_MASK      (0xffff<<0)
-
-#define GFX_OP_SCISSOR_ENABLE	 ((0x3<<29)|(0x1c<<24)|(0x10<<19))
-#define GFX_OP_SCISSOR_RECT	 ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1)
-#define GFX_OP_COLOR_FACTOR      ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0)
-#define GFX_OP_STIPPLE           ((0x3<<29)|(0x1d<<24)|(0x83<<16))
-#define GFX_OP_MAP_INFO          ((0x3<<29)|(0x1d<<24)|0x4)
-#define GFX_OP_DESTBUFFER_VARS   ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0)
-#define GFX_OP_DRAWRECT_INFO     ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3))
-
-#define GFX_OP_DRAWRECT_INFO_I965  ((0x7900<<16)|0x2)
-
-#define SRC_COPY_BLT_CMD                ((2<<29)|(0x43<<22)|4)
-#define XY_SRC_COPY_BLT_CMD		((2<<29)|(0x53<<22)|6)
-#define XY_SRC_COPY_BLT_WRITE_ALPHA	(1<<21)
-#define XY_SRC_COPY_BLT_WRITE_RGB	(1<<20)
-#define XY_SRC_COPY_BLT_SRC_TILED	(1<<15)
-#define XY_SRC_COPY_BLT_DST_TILED	(1<<11)
-
-
-#define MI_BATCH_BUFFER		((0x30<<23)|1)
-#define MI_BATCH_BUFFER_START	(0x31<<23)
-#define MI_BATCH_BUFFER_END	(0xA<<23)
-#define MI_BATCH_NON_SECURE	(1)
 
-#define MI_BATCH_NON_SECURE_I965 (1<<8)
-
-#define MI_WAIT_FOR_EVENT       ((0x3<<23))
-#define MI_WAIT_FOR_PLANE_B_FLIP      (1<<6)
-#define MI_WAIT_FOR_PLANE_A_FLIP      (1<<2)
-#define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1)
-
-#define MI_LOAD_SCAN_LINES_INCL  ((0x12<<23))
-
-#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2)
-#define ASYNC_FLIP                (1<<22)
-#define DISPLAY_PLANE_A           (0<<20)
-#define DISPLAY_PLANE_B           (1<<20)
-
-/* Display regs */
-#define DSPACNTR                0x70180
-#define DSPBCNTR                0x71180
-#define DISPPLANE_SEL_PIPE_MASK                 (1<<24)
+#define PALETTE_A		0x0a000
+#define PALETTE_B		0x0a800
 
-/* Define the region of interest for the binner:
+/*
+ * Overlay regs
  */
-#define CMD_OP_BIN_CONTROL	 ((0x3<<29)|(0x1d<<24)|(0x84<<16)|4)
-
-#define CMD_OP_DESTBUFFER_INFO	 ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1)
-
-#define BREADCRUMB_BITS 31
-#define BREADCRUMB_MASK ((1U << BREADCRUMB_BITS) - 1)
 
-#define READ_BREADCRUMB(dev_priv)  (((volatile u32*)(dev_priv->hw_status_page))[5])
-#define READ_HWSP(dev_priv, reg)  (((volatile u32*)(dev_priv->hw_status_page))[reg])
-
-#define BLC_PWM_CTL		0x61254
-#define BACKLIGHT_MODULATION_FREQ_SHIFT		(17)
+#define OVADD			0x30000
+#define DOVSTA			0x30008
+#define OC_BUF			(0x3<<20)
+#define OGAMC5			0x30010
+#define OGAMC4			0x30014
+#define OGAMC3			0x30018
+#define OGAMC2			0x3001c
+#define OGAMC1			0x30020
+#define OGAMC0			0x30024
 
-#define BLC_PWM_CTL2		0x61250
-/**
- * This is the most significant 15 bits of the number of backlight cycles in a
- * complete cycle of the modulated backlight control.
- *
- * The actual value is this field multiplied by two.
- */
-#define BACKLIGHT_MODULATION_FREQ_MASK		(0x7fff << 17)
-#define BLM_LEGACY_MODE				(1 << 16)
-/**
- * This is the number of cycles out of the backlight modulation cycle for which
- * the backlight is on.
- *
- * This field must be no greater than the number of cycles in the complete
- * backlight modulation cycle.
- */
-#define BACKLIGHT_DUTY_CYCLE_SHIFT		(0)
-#define BACKLIGHT_DUTY_CYCLE_MASK		(0xffff)
-
-#define I915_GCFGC			0xf0
-#define I915_LOW_FREQUENCY_ENABLE		(1 << 7)
-#define I915_DISPLAY_CLOCK_190_200_MHZ		(0 << 4)
-#define I915_DISPLAY_CLOCK_333_MHZ		(4 << 4)
-#define I915_DISPLAY_CLOCK_MASK			(7 << 4)
-
-#define I855_HPLLCC			0xc0
-#define I855_CLOCK_CONTROL_MASK			(3 << 0)
-#define I855_CLOCK_133_200			(0 << 0)
-#define I855_CLOCK_100_200			(1 << 0)
-#define I855_CLOCK_100_133			(2 << 0)
-#define I855_CLOCK_166_250			(3 << 0)
-
-/* p317, 319
+/*
+ * Display engine regs
  */
-#define VCLK2_VCO_M        0x6008 /* treat as 16 bit? (includes msbs) */
-#define VCLK2_VCO_N        0x600a
-#define VCLK2_VCO_DIV_SEL  0x6012
-
-#define VCLK_DIVISOR_VGA0   0x6000
-#define VCLK_DIVISOR_VGA1   0x6004
-#define VCLK_POST_DIV	    0x6010
-/** Selects a post divisor of 4 instead of 2. */
-# define VGA1_PD_P2_DIV_4	(1 << 15)
-/** Overrides the p2 post divisor field */
-# define VGA1_PD_P1_DIV_2	(1 << 13)
-# define VGA1_PD_P1_SHIFT	8
-/** P1 value is 2 greater than this field */
-# define VGA1_PD_P1_MASK	(0x1f << 8)
-/** Selects a post divisor of 4 instead of 2. */
-# define VGA0_PD_P2_DIV_4	(1 << 7)
-/** Overrides the p2 post divisor field */
-# define VGA0_PD_P1_DIV_2	(1 << 5)
-# define VGA0_PD_P1_SHIFT	0
-/** P1 value is 2 greater than this field */
-# define VGA0_PD_P1_MASK	(0x1f << 0)
-
-/* PCI D state control register */
-#define D_STATE		0x6104
-#define DSPCLK_GATE_D	0x6200
 
-/* I830 CRTC registers */
+/* Pipe A timing regs */
 #define HTOTAL_A	0x60000
 #define HBLANK_A	0x60004
 #define HSYNC_A		0x60008
@@ -847,8 +916,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define VSYNC_A		0x60014
 #define PIPEASRC	0x6001c
 #define BCLRPAT_A	0x60020
-#define VSYNCSHIFT_A	0x60028
 
+/* Pipe B timing regs */
 #define HTOTAL_B	0x61000
 #define HBLANK_B	0x61004
 #define HSYNC_B		0x61008
@@ -857,413 +926,856 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 #define VSYNC_B		0x61014
 #define PIPEBSRC	0x6101c
 #define BCLRPAT_B	0x61020
-#define VSYNCSHIFT_B	0x61028
 
-#define HACTIVE_MASK	0x00000fff
-#define VTOTAL_MASK	0x00001fff
-#define VTOTAL_SHIFT	16
-#define VACTIVE_MASK	0x00000fff
-#define VBLANK_END_MASK	0x00001fff
-#define VBLANK_END_SHIFT 16
-#define VBLANK_START_MASK 0x00001fff
+/* VGA port control */
+#define ADPA			0x61100
+#define   ADPA_DAC_ENABLE	(1<<31)
+#define   ADPA_DAC_DISABLE	0
+#define   ADPA_PIPE_SELECT_MASK	(1<<30)
+#define   ADPA_PIPE_A_SELECT	0
+#define   ADPA_PIPE_B_SELECT	(1<<30)
+#define   ADPA_USE_VGA_HVPOLARITY (1<<15)
+#define   ADPA_SETS_HVPOLARITY	0
+#define   ADPA_VSYNC_CNTL_DISABLE (1<<11)
+#define   ADPA_VSYNC_CNTL_ENABLE 0
+#define   ADPA_HSYNC_CNTL_DISABLE (1<<10)
+#define   ADPA_HSYNC_CNTL_ENABLE 0
+#define   ADPA_VSYNC_ACTIVE_HIGH (1<<4)
+#define   ADPA_VSYNC_ACTIVE_LOW	0
+#define   ADPA_HSYNC_ACTIVE_HIGH (1<<3)
+#define   ADPA_HSYNC_ACTIVE_LOW	0
+#define   ADPA_DPMS_MASK	(~(3<<10))
+#define   ADPA_DPMS_ON		(0<<10)
+#define   ADPA_DPMS_SUSPEND	(1<<10)
+#define   ADPA_DPMS_STANDBY	(2<<10)
+#define   ADPA_DPMS_OFF		(3<<10)
+
+/* Hotplug control (945+ only) */
+#define PORT_HOTPLUG_EN		0x61110
+#define   SDVOB_HOTPLUG_INT_EN			(1 << 26)
+#define   SDVOC_HOTPLUG_INT_EN			(1 << 25)
+#define   TV_HOTPLUG_INT_EN			(1 << 18)
+#define   CRT_HOTPLUG_INT_EN			(1 << 9)
+#define   CRT_HOTPLUG_FORCE_DETECT		(1 << 3)
 
-#define PP_STATUS	0x61200
-# define PP_ON					(1 << 31)
+#define PORT_HOTPLUG_STAT	0x61114
+#define   CRT_HOTPLUG_INT_STATUS		(1 << 11)
+#define   TV_HOTPLUG_INT_STATUS			(1 << 10)
+#define   CRT_HOTPLUG_MONITOR_MASK		(3 << 8)
+#define   CRT_HOTPLUG_MONITOR_COLOR		(3 << 8)
+#define   CRT_HOTPLUG_MONITOR_MONO		(2 << 8)
+#define   CRT_HOTPLUG_MONITOR_NONE		(0 << 8)
+#define   SDVOC_HOTPLUG_INT_STATUS		(1 << 7)
+#define   SDVOB_HOTPLUG_INT_STATUS		(1 << 6)
+
+/* SDVO port control */
+#define SDVOB			0x61140
+#define SDVOC			0x61160
+#define   SDVO_ENABLE		(1 << 31)
+#define   SDVO_PIPE_B_SELECT	(1 << 30)
+#define   SDVO_STALL_SELECT	(1 << 29)
+#define   SDVO_INTERRUPT_ENABLE	(1 << 26)
 /**
+ * 915G/GM SDVO pixel multiplier.
+ *
+ * Programmed value is multiplier - 1, up to 5x.
+ *
+ * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ */
+#define   SDVO_PORT_MULTIPLY_MASK	(7 << 23)
+#define   SDVO_PORT_MULTIPLY_SHIFT		23
+#define   SDVO_PHASE_SELECT_MASK	(15 << 19)
+#define   SDVO_PHASE_SELECT_DEFAULT	(6 << 19)
+#define   SDVO_CLOCK_OUTPUT_INVERT	(1 << 18)
+#define   SDVOC_GANG_MODE		(1 << 16)
+#define   SDVO_BORDER_ENABLE		(1 << 7)
+#define   SDVOB_PCIE_CONCURRENCY	(1 << 3)
+#define   SDVO_DETECTED			(1 << 2)
+/* Bits to be preserved when writing */
+#define   SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14) | (1 << 26))
+#define   SDVOC_PRESERVE_MASK ((1 << 17) | (1 << 26))
+
+/* DVO port control */
+#define DVOA			0x61120
+#define DVOB			0x61140
+#define DVOC			0x61160
+#define   DVO_ENABLE			(1 << 31)
+#define   DVO_PIPE_B_SELECT		(1 << 30)
+#define   DVO_PIPE_STALL_UNUSED		(0 << 28)
+#define   DVO_PIPE_STALL		(1 << 28)
+#define   DVO_PIPE_STALL_TV		(2 << 28)
+#define   DVO_PIPE_STALL_MASK		(3 << 28)
+#define   DVO_USE_VGA_SYNC		(1 << 15)
+#define   DVO_DATA_ORDER_I740		(0 << 14)
+#define   DVO_DATA_ORDER_FP		(1 << 14)
+#define   DVO_VSYNC_DISABLE		(1 << 11)
+#define   DVO_HSYNC_DISABLE		(1 << 10)
+#define   DVO_VSYNC_TRISTATE		(1 << 9)
+#define   DVO_HSYNC_TRISTATE		(1 << 8)
+#define   DVO_BORDER_ENABLE		(1 << 7)
+#define   DVO_DATA_ORDER_GBRG		(1 << 6)
+#define   DVO_DATA_ORDER_RGGB		(0 << 6)
+#define   DVO_DATA_ORDER_GBRG_ERRATA	(0 << 6)
+#define   DVO_DATA_ORDER_RGGB_ERRATA	(1 << 6)
+#define   DVO_VSYNC_ACTIVE_HIGH		(1 << 4)
+#define   DVO_HSYNC_ACTIVE_HIGH		(1 << 3)
+#define   DVO_BLANK_ACTIVE_HIGH		(1 << 2)
+#define   DVO_OUTPUT_CSTATE_PIXELS	(1 << 1)	/* SDG only */
+#define   DVO_OUTPUT_SOURCE_SIZE_PIXELS	(1 << 0)	/* SDG only */
+#define   DVO_PRESERVE_MASK		(0x7<<24)
+#define DVOA_SRCDIM		0x61124
+#define DVOB_SRCDIM		0x61144
+#define DVOC_SRCDIM		0x61164
+#define   DVO_SRCDIM_HORIZONTAL_SHIFT	12
+#define   DVO_SRCDIM_VERTICAL_SHIFT	0
+
+/* LVDS port control */
+#define LVDS			0x61180
+/*
+ * Enables the LVDS port.  This bit must be set before DPLLs are enabled, as
+ * the DPLL semantics change when the LVDS is assigned to that pipe.
+ */
+#define   LVDS_PORT_EN			(1 << 31)
+/* Selects pipe B for LVDS data.  Must be set on pre-965. */
+#define   LVDS_PIPEB_SELECT		(1 << 30)
+/*
+ * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
+ * pixel.
+ */
+#define   LVDS_A0A2_CLKA_POWER_MASK	(3 << 8)
+#define   LVDS_A0A2_CLKA_POWER_DOWN	(0 << 8)
+#define   LVDS_A0A2_CLKA_POWER_UP	(3 << 8)
+/*
+ * Controls the A3 data pair, which contains the additional LSBs for 24 bit
+ * mode.  Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
+ * on.
+ */
+#define   LVDS_A3_POWER_MASK		(3 << 6)
+#define   LVDS_A3_POWER_DOWN		(0 << 6)
+#define   LVDS_A3_POWER_UP		(3 << 6)
+/*
+ * Controls the CLKB pair.  This should only be set when LVDS_B0B3_POWER_UP
+ * is set.
+ */
+#define   LVDS_CLKB_POWER_MASK		(3 << 4)
+#define   LVDS_CLKB_POWER_DOWN		(0 << 4)
+#define   LVDS_CLKB_POWER_UP		(3 << 4)
+/*
+ * Controls the B0-B3 data pairs.  This must be set to match the DPLL p2
+ * setting for whether we are in dual-channel mode.  The B3 pair will
+ * additionally only be powered up when LVDS_A3_POWER_UP is set.
+ */
+#define   LVDS_B0B3_POWER_MASK		(3 << 2)
+#define   LVDS_B0B3_POWER_DOWN		(0 << 2)
+#define   LVDS_B0B3_POWER_UP		(3 << 2)
+
+/* Panel power sequencing */
+#define PP_STATUS	0x61200
+#define   PP_ON		(1 << 31)
+/*
  * Indicates that all dependencies of the panel are on:
  *
  * - PLL enabled
  * - pipe enabled
  * - LVDS/DVOB/DVOC on
  */
-# define PP_READY				(1 << 30)
-# define PP_SEQUENCE_NONE			(0 << 28)
-# define PP_SEQUENCE_ON				(1 << 28)
-# define PP_SEQUENCE_OFF			(2 << 28)
-# define PP_SEQUENCE_MASK			0x30000000
+#define   PP_READY		(1 << 30)
+#define   PP_SEQUENCE_NONE	(0 << 28)
+#define   PP_SEQUENCE_ON	(1 << 28)
+#define   PP_SEQUENCE_OFF	(2 << 28)
+#define   PP_SEQUENCE_MASK	0x30000000
 #define PP_CONTROL	0x61204
-# define POWER_TARGET_ON			(1 << 0)
-
-#define LVDSPP_ON       0x61208
-#define LVDSPP_OFF      0x6120c
-#define PP_CYCLE        0x61210
+#define   POWER_TARGET_ON	(1 << 0)
+#define PP_ON_DELAYS	0x61208
+#define PP_OFF_DELAYS	0x6120c
+#define PP_DIVISOR	0x61210
 
+/* Panel fitting */
 #define PFIT_CONTROL	0x61230
-# define PFIT_ENABLE				(1 << 31)
-# define PFIT_PIPE_MASK				(3 << 29)
-# define PFIT_PIPE_SHIFT			29
-# define VERT_INTERP_DISABLE			(0 << 10)
-# define VERT_INTERP_BILINEAR			(1 << 10)
-# define VERT_INTERP_MASK			(3 << 10)
-# define VERT_AUTO_SCALE			(1 << 9)
-# define HORIZ_INTERP_DISABLE			(0 << 6)
-# define HORIZ_INTERP_BILINEAR			(1 << 6)
-# define HORIZ_INTERP_MASK			(3 << 6)
-# define HORIZ_AUTO_SCALE			(1 << 5)
-# define PANEL_8TO6_DITHER_ENABLE		(1 << 3)
-
+#define   PFIT_ENABLE		(1 << 31)
+#define   PFIT_PIPE_MASK	(3 << 29)
+#define   PFIT_PIPE_SHIFT	29
+#define   VERT_INTERP_DISABLE	(0 << 10)
+#define   VERT_INTERP_BILINEAR	(1 << 10)
+#define   VERT_INTERP_MASK	(3 << 10)
+#define   VERT_AUTO_SCALE	(1 << 9)
+#define   HORIZ_INTERP_DISABLE	(0 << 6)
+#define   HORIZ_INTERP_BILINEAR	(1 << 6)
+#define   HORIZ_INTERP_MASK	(3 << 6)
+#define   HORIZ_AUTO_SCALE	(1 << 5)
+#define   PANEL_8TO6_DITHER_ENABLE (1 << 3)
 #define PFIT_PGM_RATIOS	0x61234
-# define PFIT_VERT_SCALE_MASK			0xfff00000
-# define PFIT_HORIZ_SCALE_MASK			0x0000fff0
-
-#define PFIT_AUTO_RATIOS	0x61238
-
-
-#define DPLL_A		0x06014
-#define DPLL_B		0x06018
-# define DPLL_VCO_ENABLE			(1 << 31)
-# define DPLL_DVO_HIGH_SPEED			(1 << 30)
-# define DPLL_SYNCLOCK_ENABLE			(1 << 29)
-# define DPLL_VGA_MODE_DIS			(1 << 28)
-# define DPLLB_MODE_DAC_SERIAL			(1 << 26) /* i915 */
-# define DPLLB_MODE_LVDS			(2 << 26) /* i915 */
-# define DPLL_MODE_MASK				(3 << 26)
-# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10	(0 << 24) /* i915 */
-# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5		(1 << 24) /* i915 */
-# define DPLLB_LVDS_P2_CLOCK_DIV_14		(0 << 24) /* i915 */
-# define DPLLB_LVDS_P2_CLOCK_DIV_7		(1 << 24) /* i915 */
-# define DPLL_P2_CLOCK_DIV_MASK			0x03000000 /* i915 */
-# define DPLL_FPA01_P1_POST_DIV_MASK		0x00ff0000 /* i915 */
-/**
- *  The i830 generation, in DAC/serial mode, defines p1 as two plus this
- * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set.
+#define   PFIT_VERT_SCALE_MASK			0xfff00000
+#define   PFIT_HORIZ_SCALE_MASK			0x0000fff0
+#define PFIT_AUTO_RATIOS 0x61238
+
+/* Backlight control */
+#define BLC_PWM_CTL		0x61254
+#define   BACKLIGHT_MODULATION_FREQ_SHIFT		(17)
+#define BLC_PWM_CTL2		0x61250 /* 965+ only */
+/*
+ * This is the most significant 15 bits of the number of backlight cycles in a
+ * complete cycle of the modulated backlight control.
+ *
+ * The actual value is this field multiplied by two.
  */
-# define DPLL_FPA01_P1_POST_DIV_MASK_I830	0x001f0000
+#define   BACKLIGHT_MODULATION_FREQ_MASK		(0x7fff << 17)
+#define   BLM_LEGACY_MODE				(1 << 16)
+/*
+ * This is the number of cycles out of the backlight modulation cycle for which
+ * the backlight is on.
+ *
+ * This field must be no greater than the number of cycles in the complete
+ * backlight modulation cycle.
+ */
+#define   BACKLIGHT_DUTY_CYCLE_SHIFT		(0)
+#define   BACKLIGHT_DUTY_CYCLE_MASK		(0xffff)
+
+/* TV port control */
+#define TV_CTL			0x68000
+/** Enables the TV encoder */
+# define TV_ENC_ENABLE			(1 << 31)
+/** Sources the TV encoder input from pipe B instead of A. */
+# define TV_ENC_PIPEB_SELECT		(1 << 30)
+/** Outputs composite video (DAC A only) */
+# define TV_ENC_OUTPUT_COMPOSITE	(0 << 28)
+/** Outputs SVideo video (DAC B/C) */
+# define TV_ENC_OUTPUT_SVIDEO		(1 << 28)
+/** Outputs Component video (DAC A/B/C) */
+# define TV_ENC_OUTPUT_COMPONENT	(2 << 28)
+/** Outputs Composite and SVideo (DAC A/B/C) */
+# define TV_ENC_OUTPUT_SVIDEO_COMPOSITE	(3 << 28)
+# define TV_TRILEVEL_SYNC		(1 << 21)
+/** Enables slow sync generation (945GM only) */
+# define TV_SLOW_SYNC			(1 << 20)
+/** Selects 4x oversampling for 480i and 576p */
+# define TV_OVERSAMPLE_4X		(0 << 18)
+/** Selects 2x oversampling for 720p and 1080i */
+# define TV_OVERSAMPLE_2X		(1 << 18)
+/** Selects no oversampling for 1080p */
+# define TV_OVERSAMPLE_NONE		(2 << 18)
+/** Selects 8x oversampling */
+# define TV_OVERSAMPLE_8X		(3 << 18)
+/** Selects progressive mode rather than interlaced */
+# define TV_PROGRESSIVE			(1 << 17)
+/** Sets the colorburst to PAL mode.  Required for non-M PAL modes. */
+# define TV_PAL_BURST			(1 << 16)
+/** Field for setting delay of Y compared to C */
+# define TV_YC_SKEW_MASK		(7 << 12)
+/** Enables a fix for 480p/576p standard definition modes on the 915GM only */
+# define TV_ENC_SDP_FIX			(1 << 11)
 /**
- * The i830 generation, in LVDS mode, defines P1 as the bit number set within
- * this field (only one bit may be set).
+ * Enables a fix for the 915GM only.
+ *
+ * Not sure what it does.
  */
-# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS	0x003f0000
-# define DPLL_FPA01_P1_POST_DIV_SHIFT		16
-# define PLL_P2_DIVIDE_BY_4			(1 << 23) /* i830, required in DVO non-gang */
-# define PLL_P1_DIVIDE_BY_TWO			(1 << 21) /* i830 */
-# define PLL_REF_INPUT_DREFCLK			(0 << 13)
-# define PLL_REF_INPUT_TVCLKINA			(1 << 13) /* i830 */
-# define PLL_REF_INPUT_TVCLKINBC		(2 << 13) /* SDVO TVCLKIN */
-# define PLLB_REF_INPUT_SPREADSPECTRUMIN	(3 << 13)
-# define PLL_REF_INPUT_MASK			(3 << 13)
-# define PLL_LOAD_PULSE_PHASE_SHIFT		9
-/*
- * Parallel to Serial Load Pulse phase selection.
- * Selects the phase for the 10X DPLL clock for the PCIe
- * digital display port. The range is 4 to 13; 10 or more
- * is just a flip delay. The default is 6
+# define TV_ENC_C0_FIX			(1 << 10)
+/** Bits that must be preserved by software */
+# define TV_CTL_SAVE			((3 << 8) | (3 << 6))
+# define TV_FUSE_STATE_MASK		(3 << 4)
+/** Read-only state that reports all features enabled */
+# define TV_FUSE_STATE_ENABLED		(0 << 4)
+/** Read-only state that reports that Macrovision is disabled in hardware*/
+# define TV_FUSE_STATE_NO_MACROVISION	(1 << 4)
+/** Read-only state that reports that TV-out is disabled in hardware. */
+# define TV_FUSE_STATE_DISABLED		(2 << 4)
+/** Normal operation */
+# define TV_TEST_MODE_NORMAL		(0 << 0)
+/** Encoder test pattern 1 - combo pattern */
+# define TV_TEST_MODE_PATTERN_1		(1 << 0)
+/** Encoder test pattern 2 - full screen vertical 75% color bars */
+# define TV_TEST_MODE_PATTERN_2		(2 << 0)
+/** Encoder test pattern 3 - full screen horizontal 75% color bars */
+# define TV_TEST_MODE_PATTERN_3		(3 << 0)
+/** Encoder test pattern 4 - random noise */
+# define TV_TEST_MODE_PATTERN_4		(4 << 0)
+/** Encoder test pattern 5 - linear color ramps */
+# define TV_TEST_MODE_PATTERN_5		(5 << 0)
+/**
+ * This test mode forces the DACs to 50% of full output.
+ *
+ * This is used for load detection in combination with TVDAC_SENSE_MASK
  */
-# define PLL_LOAD_PULSE_PHASE_MASK		(0xf << PLL_LOAD_PULSE_PHASE_SHIFT)
-# define DISPLAY_RATE_SELECT_FPA1		(1 << 8)
+# define TV_TEST_MODE_MONITOR_DETECT	(7 << 0)
+# define TV_TEST_MODE_MASK		(7 << 0)
 
+#define TV_DAC			0x68004
 /**
- * SDVO multiplier for 945G/GM. Not used on 965.
+ * Reports that DAC state change logic has reported change (RO).
  *
- * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ * This gets cleared when TV_DAC_STATE_EN is cleared
+*/
+# define TVDAC_STATE_CHG		(1 << 31)
+# define TVDAC_SENSE_MASK		(7 << 28)
+/** Reports that DAC A voltage is above the detect threshold */
+# define TVDAC_A_SENSE			(1 << 30)
+/** Reports that DAC B voltage is above the detect threshold */
+# define TVDAC_B_SENSE			(1 << 29)
+/** Reports that DAC C voltage is above the detect threshold */
+# define TVDAC_C_SENSE			(1 << 28)
+/**
+ * Enables DAC state detection logic, for load-based TV detection.
+ *
+ * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set
+ * to off, for load detection to work.
  */
-# define SDVO_MULTIPLIER_MASK			0x000000ff
-# define SDVO_MULTIPLIER_SHIFT_HIRES		4
-# define SDVO_MULTIPLIER_SHIFT_VGA		0
+# define TVDAC_STATE_CHG_EN		(1 << 27)
+/** Sets the DAC A sense value to high */
+# define TVDAC_A_SENSE_CTL		(1 << 26)
+/** Sets the DAC B sense value to high */
+# define TVDAC_B_SENSE_CTL		(1 << 25)
+/** Sets the DAC C sense value to high */
+# define TVDAC_C_SENSE_CTL		(1 << 24)
+/** Overrides the ENC_ENABLE and DAC voltage levels */
+# define DAC_CTL_OVERRIDE		(1 << 7)
+/** Sets the slew rate.  Must be preserved in software */
+# define ENC_TVDAC_SLEW_FAST		(1 << 6)
+# define DAC_A_1_3_V			(0 << 4)
+# define DAC_A_1_1_V			(1 << 4)
+# define DAC_A_0_7_V			(2 << 4)
+# define DAC_A_OFF			(3 << 4)
+# define DAC_B_1_3_V			(0 << 2)
+# define DAC_B_1_1_V			(1 << 2)
+# define DAC_B_0_7_V			(2 << 2)
+# define DAC_B_OFF			(3 << 2)
+# define DAC_C_1_3_V			(0 << 0)
+# define DAC_C_1_1_V			(1 << 0)
+# define DAC_C_0_7_V			(2 << 0)
+# define DAC_C_OFF			(3 << 0)
 
-/** @defgroup DPLL_MD
- * @{
+/**
+ * CSC coefficients are stored in a floating point format with 9 bits of
+ * mantissa and 2 or 3 bits of exponent.  The exponent is represented as 2**-n,
+ * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with
+ * -1 (0x3) being the only legal negative value.
  */
-/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */
-#define DPLL_A_MD		0x0601c
-/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */
-#define DPLL_B_MD		0x06020
+#define TV_CSC_Y		0x68010
+# define TV_RY_MASK			0x07ff0000
+# define TV_RY_SHIFT			16
+# define TV_GY_MASK			0x00000fff
+# define TV_GY_SHIFT			0
+
+#define TV_CSC_Y2		0x68014
+# define TV_BY_MASK			0x07ff0000
+# define TV_BY_SHIFT			16
 /**
- * UDI pixel divider, controlling how many pixels are stuffed into a packet.
+ * Y attenuation for component video.
  *
- * Value is pixels minus 1.  Must be set to 1 pixel for SDVO.
+ * Stored in 1.9 fixed point.
  */
-# define DPLL_MD_UDI_DIVIDER_MASK		0x3f000000
-# define DPLL_MD_UDI_DIVIDER_SHIFT		24
-/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */
-# define DPLL_MD_VGA_UDI_DIVIDER_MASK		0x003f0000
-# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT		16
+# define TV_AY_MASK			0x000003ff
+# define TV_AY_SHIFT			0
+
+#define TV_CSC_U		0x68018
+# define TV_RU_MASK			0x07ff0000
+# define TV_RU_SHIFT			16
+# define TV_GU_MASK			0x000007ff
+# define TV_GU_SHIFT			0
+
+#define TV_CSC_U2		0x6801c
+# define TV_BU_MASK			0x07ff0000
+# define TV_BU_SHIFT			16
 /**
- * SDVO/UDI pixel multiplier.
+ * U attenuation for component video.
  *
- * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus
- * clock rate is 10 times the DPLL clock.  At low resolution/refresh rate
- * modes, the bus rate would be below the limits, so SDVO allows for stuffing
- * dummy bytes in the datastream at an increased clock rate, with both sides of
- * the link knowing how many bytes are fill.
- *
- * So, for a mode with a dotclock of 65Mhz, we would want to double the clock
- * rate to 130Mhz to get a bus rate of 1.30Ghz.  The DPLL clock rate would be
- * set to 130Mhz, and the SDVO multiplier set to 2x in this register and
- * through an SDVO command.
+ * Stored in 1.9 fixed point.
+ */
+# define TV_AU_MASK			0x000003ff
+# define TV_AU_SHIFT			0
+
+#define TV_CSC_V		0x68020
+# define TV_RV_MASK			0x0fff0000
+# define TV_RV_SHIFT			16
+# define TV_GV_MASK			0x000007ff
+# define TV_GV_SHIFT			0
+
+#define TV_CSC_V2		0x68024
+# define TV_BV_MASK			0x07ff0000
+# define TV_BV_SHIFT			16
+/**
+ * V attenuation for component video.
  *
- * This register field has values of multiplication factor minus 1, with
- * a maximum multiplier of 5 for SDVO.
+ * Stored in 1.9 fixed point.
  */
-# define DPLL_MD_UDI_MULTIPLIER_MASK		0x00003f00
-# define DPLL_MD_UDI_MULTIPLIER_SHIFT		8
-/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK.
- * This best be set to the default value (3) or the CRT won't work. No,
- * I don't entirely understand what this does...
+# define TV_AV_MASK			0x000007ff
+# define TV_AV_SHIFT			0
+
+#define TV_CLR_KNOBS		0x68028
+/** 2s-complement brightness adjustment */
+# define TV_BRIGHTNESS_MASK		0xff000000
+# define TV_BRIGHTNESS_SHIFT		24
+/** Contrast adjustment, as a 2.6 unsigned floating point number */
+# define TV_CONTRAST_MASK		0x00ff0000
+# define TV_CONTRAST_SHIFT		16
+/** Saturation adjustment, as a 2.6 unsigned floating point number */
+# define TV_SATURATION_MASK		0x0000ff00
+# define TV_SATURATION_SHIFT		8
+/** Hue adjustment, as an integer phase angle in degrees */
+# define TV_HUE_MASK			0x000000ff
+# define TV_HUE_SHIFT			0
+
+#define TV_CLR_LEVEL		0x6802c
+/** Controls the DAC level for black */
+# define TV_BLACK_LEVEL_MASK		0x01ff0000
+# define TV_BLACK_LEVEL_SHIFT		16
+/** Controls the DAC level for blanking */
+# define TV_BLANK_LEVEL_MASK		0x000001ff
+# define TV_BLANK_LEVEL_SHIFT		0
+
+#define TV_H_CTL_1		0x68030
+/** Number of pixels in the hsync. */
+# define TV_HSYNC_END_MASK		0x1fff0000
+# define TV_HSYNC_END_SHIFT		16
+/** Total number of pixels minus one in the line (display and blanking). */
+# define TV_HTOTAL_MASK			0x00001fff
+# define TV_HTOTAL_SHIFT		0
+
+#define TV_H_CTL_2		0x68034
+/** Enables the colorburst (needed for non-component color) */
+# define TV_BURST_ENA			(1 << 31)
+/** Offset of the colorburst from the start of hsync, in pixels minus one. */
+# define TV_HBURST_START_SHIFT		16
+# define TV_HBURST_START_MASK		0x1fff0000
+/** Length of the colorburst */
+# define TV_HBURST_LEN_SHIFT		0
+# define TV_HBURST_LEN_MASK		0x0001fff
+
+#define TV_H_CTL_3		0x68038
+/** End of hblank, measured in pixels minus one from start of hsync */
+# define TV_HBLANK_END_SHIFT		16
+# define TV_HBLANK_END_MASK		0x1fff0000
+/** Start of hblank, measured in pixels minus one from start of hsync */
+# define TV_HBLANK_START_SHIFT		0
+# define TV_HBLANK_START_MASK		0x0001fff
+
+#define TV_V_CTL_1		0x6803c
+/** XXX */
+# define TV_NBR_END_SHIFT		16
+# define TV_NBR_END_MASK		0x07ff0000
+/** XXX */
+# define TV_VI_END_F1_SHIFT		8
+# define TV_VI_END_F1_MASK		0x00003f00
+/** XXX */
+# define TV_VI_END_F2_SHIFT		0
+# define TV_VI_END_F2_MASK		0x0000003f
+
+#define TV_V_CTL_2		0x68040
+/** Length of vsync, in half lines */
+# define TV_VSYNC_LEN_MASK		0x07ff0000
+# define TV_VSYNC_LEN_SHIFT		16
+/** Offset of the start of vsync in field 1, measured in one less than the
+ * number of half lines.
  */
-# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK	0x0000003f
-# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT	0
-/** @} */
-
-#define DPLL_TEST		0x606c
-# define DPLLB_TEST_SDVO_DIV_1			(0 << 22)
-# define DPLLB_TEST_SDVO_DIV_2			(1 << 22)
-# define DPLLB_TEST_SDVO_DIV_4			(2 << 22)
-# define DPLLB_TEST_SDVO_DIV_MASK		(3 << 22)
-# define DPLLB_TEST_N_BYPASS			(1 << 19)
-# define DPLLB_TEST_M_BYPASS			(1 << 18)
-# define DPLLB_INPUT_BUFFER_ENABLE		(1 << 16)
-# define DPLLA_TEST_N_BYPASS			(1 << 3)
-# define DPLLA_TEST_M_BYPASS			(1 << 2)
-# define DPLLA_INPUT_BUFFER_ENABLE		(1 << 0)
-
-#define ADPA			0x61100
-#define ADPA_DAC_ENABLE		(1<<31)
-#define ADPA_DAC_DISABLE	0
-#define ADPA_PIPE_SELECT_MASK	(1<<30)
-#define ADPA_PIPE_A_SELECT	0
-#define ADPA_PIPE_B_SELECT	(1<<30)
-#define ADPA_USE_VGA_HVPOLARITY (1<<15)
-#define ADPA_SETS_HVPOLARITY	0
-#define ADPA_VSYNC_CNTL_DISABLE (1<<11)
-#define ADPA_VSYNC_CNTL_ENABLE	0
-#define ADPA_HSYNC_CNTL_DISABLE (1<<10)
-#define ADPA_HSYNC_CNTL_ENABLE	0
-#define ADPA_VSYNC_ACTIVE_HIGH	(1<<4)
-#define ADPA_VSYNC_ACTIVE_LOW	0
-#define ADPA_HSYNC_ACTIVE_HIGH	(1<<3)
-#define ADPA_HSYNC_ACTIVE_LOW	0
-
-#define FPA0		0x06040
-#define FPA1		0x06044
-#define FPB0		0x06048
-#define FPB1		0x0604c
-# define FP_N_DIV_MASK				0x003f0000
-# define FP_N_DIV_SHIFT				16
-# define FP_M1_DIV_MASK				0x00003f00
-# define FP_M1_DIV_SHIFT			8
-# define FP_M2_DIV_MASK				0x0000003f
-# define FP_M2_DIV_SHIFT			0
+# define TV_VSYNC_START_F1_MASK		0x00007f00
+# define TV_VSYNC_START_F1_SHIFT	8
+/**
+ * Offset of the start of vsync in field 2, measured in one less than the
+ * number of half lines.
+ */
+# define TV_VSYNC_START_F2_MASK		0x0000007f
+# define TV_VSYNC_START_F2_SHIFT	0
+
+#define TV_V_CTL_3		0x68044
+/** Enables generation of the equalization signal */
+# define TV_EQUAL_ENA			(1 << 31)
+/** Length of vsync, in half lines */
+# define TV_VEQ_LEN_MASK		0x007f0000
+# define TV_VEQ_LEN_SHIFT		16
+/** Offset of the start of equalization in field 1, measured in one less than
+ * the number of half lines.
+ */
+# define TV_VEQ_START_F1_MASK		0x0007f00
+# define TV_VEQ_START_F1_SHIFT		8
+/**
+ * Offset of the start of equalization in field 2, measured in one less than
+ * the number of half lines.
+ */
+# define TV_VEQ_START_F2_MASK		0x000007f
+# define TV_VEQ_START_F2_SHIFT		0
 
+#define TV_V_CTL_4		0x68048
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F1_MASK	0x003f0000
+# define TV_VBURST_START_F1_SHIFT	16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F1_MASK		0x000000ff
+# define TV_VBURST_END_F1_SHIFT		0
 
-#define PORT_HOTPLUG_EN		0x61110
-# define SDVOB_HOTPLUG_INT_EN			(1 << 26)
-# define SDVOC_HOTPLUG_INT_EN			(1 << 25)
-# define TV_HOTPLUG_INT_EN			(1 << 18)
-# define CRT_HOTPLUG_INT_EN			(1 << 9)
-# define CRT_HOTPLUG_FORCE_DETECT		(1 << 3)
+#define TV_V_CTL_5		0x6804c
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F2_MASK	0x003f0000
+# define TV_VBURST_START_F2_SHIFT	16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F2_MASK		0x000000ff
+# define TV_VBURST_END_F2_SHIFT		0
 
-#define PORT_HOTPLUG_STAT	0x61114
-# define CRT_HOTPLUG_INT_STATUS			(1 << 11)
-# define TV_HOTPLUG_INT_STATUS			(1 << 10)
-# define CRT_HOTPLUG_MONITOR_MASK		(3 << 8)
-# define CRT_HOTPLUG_MONITOR_COLOR		(3 << 8)
-# define CRT_HOTPLUG_MONITOR_MONO		(2 << 8)
-# define CRT_HOTPLUG_MONITOR_NONE		(0 << 8)
-# define SDVOC_HOTPLUG_INT_STATUS		(1 << 7)
-# define SDVOB_HOTPLUG_INT_STATUS		(1 << 6)
+#define TV_V_CTL_6		0x68050
+/**
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F3_MASK	0x003f0000
+# define TV_VBURST_START_F3_SHIFT	16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F3_MASK		0x000000ff
+# define TV_VBURST_END_F3_SHIFT		0
 
-#define SDVOB			0x61140
-#define SDVOC			0x61160
-#define SDVO_ENABLE				(1 << 31)
-#define SDVO_PIPE_B_SELECT			(1 << 30)
-#define SDVO_STALL_SELECT			(1 << 29)
-#define SDVO_INTERRUPT_ENABLE			(1 << 26)
+#define TV_V_CTL_7		0x68054
 /**
- * 915G/GM SDVO pixel multiplier.
- *
- * Programmed value is multiplier - 1, up to 5x.
+ * Offset to start of vertical colorburst, measured in one less than the
+ * number of lines from vertical start.
+ */
+# define TV_VBURST_START_F4_MASK	0x003f0000
+# define TV_VBURST_START_F4_SHIFT	16
+/**
+ * Offset to the end of vertical colorburst, measured in one less than the
+ * number of lines from the start of NBR.
+ */
+# define TV_VBURST_END_F4_MASK		0x000000ff
+# define TV_VBURST_END_F4_SHIFT		0
+
+#define TV_SC_CTL_1		0x68060
+/** Turns on the first subcarrier phase generation DDA */
+# define TV_SC_DDA1_EN			(1 << 31)
+/** Turns on the first subcarrier phase generation DDA */
+# define TV_SC_DDA2_EN			(1 << 30)
+/** Turns on the first subcarrier phase generation DDA */
+# define TV_SC_DDA3_EN			(1 << 29)
+/** Sets the subcarrier DDA to reset frequency every other field */
+# define TV_SC_RESET_EVERY_2		(0 << 24)
+/** Sets the subcarrier DDA to reset frequency every fourth field */
+# define TV_SC_RESET_EVERY_4		(1 << 24)
+/** Sets the subcarrier DDA to reset frequency every eighth field */
+# define TV_SC_RESET_EVERY_8		(2 << 24)
+/** Sets the subcarrier DDA to never reset the frequency */
+# define TV_SC_RESET_NEVER		(3 << 24)
+/** Sets the peak amplitude of the colorburst.*/
+# define TV_BURST_LEVEL_MASK		0x00ff0000
+# define TV_BURST_LEVEL_SHIFT		16
+/** Sets the increment of the first subcarrier phase generation DDA */
+# define TV_SCDDA1_INC_MASK		0x00000fff
+# define TV_SCDDA1_INC_SHIFT		0
+
+#define TV_SC_CTL_2		0x68064
+/** Sets the rollover for the second subcarrier phase generation DDA */
+# define TV_SCDDA2_SIZE_MASK		0x7fff0000
+# define TV_SCDDA2_SIZE_SHIFT		16
+/** Sets the increent of the second subcarrier phase generation DDA */
+# define TV_SCDDA2_INC_MASK		0x00007fff
+# define TV_SCDDA2_INC_SHIFT		0
+
+#define TV_SC_CTL_3		0x68068
+/** Sets the rollover for the third subcarrier phase generation DDA */
+# define TV_SCDDA3_SIZE_MASK		0x7fff0000
+# define TV_SCDDA3_SIZE_SHIFT		16
+/** Sets the increent of the third subcarrier phase generation DDA */
+# define TV_SCDDA3_INC_MASK		0x00007fff
+# define TV_SCDDA3_INC_SHIFT		0
+
+#define TV_WIN_POS		0x68070
+/** X coordinate of the display from the start of horizontal active */
+# define TV_XPOS_MASK			0x1fff0000
+# define TV_XPOS_SHIFT			16
+/** Y coordinate of the display from the start of vertical active (NBR) */
+# define TV_YPOS_MASK			0x00000fff
+# define TV_YPOS_SHIFT			0
+
+#define TV_WIN_SIZE		0x68074
+/** Horizontal size of the display window, measured in pixels*/
+# define TV_XSIZE_MASK			0x1fff0000
+# define TV_XSIZE_SHIFT			16
+/**
+ * Vertical size of the display window, measured in pixels.
  *
- * \sa DPLL_MD_UDI_MULTIPLIER_MASK
+ * Must be even for interlaced modes.
  */
-#define SDVO_PORT_MULTIPLY_MASK			(7 << 23)
-#define SDVO_PORT_MULTIPLY_SHIFT		23
-#define SDVO_PHASE_SELECT_MASK			(15 << 19)
-#define SDVO_PHASE_SELECT_DEFAULT		(6 << 19)
-#define SDVO_CLOCK_OUTPUT_INVERT		(1 << 18)
-#define SDVOC_GANG_MODE				(1 << 16)
-#define SDVO_BORDER_ENABLE			(1 << 7)
-#define SDVOB_PCIE_CONCURRENCY			(1 << 3)
-#define SDVO_DETECTED				(1 << 2)
-/* Bits to be preserved when writing */
-#define SDVOB_PRESERVE_MASK			((1 << 17) | (1 << 16) | (1 << 14))
-#define SDVOC_PRESERVE_MASK			(1 << 17)
+# define TV_YSIZE_MASK			0x00000fff
+# define TV_YSIZE_SHIFT			0
 
-/** @defgroup LVDS
- * @{
- */
+#define TV_FILTER_CTL_1		0x68080
 /**
- * This register controls the LVDS output enable, pipe selection, and data
- * format selection.
+ * Enables automatic scaling calculation.
  *
- * All of the clock/data pairs are force powered down by power sequencing.
+ * If set, the rest of the registers are ignored, and the calculated values can
+ * be read back from the register.
  */
-#define LVDS			0x61180
+# define TV_AUTO_SCALE			(1 << 31)
 /**
- * Enables the LVDS port.  This bit must be set before DPLLs are enabled, as
- * the DPLL semantics change when the LVDS is assigned to that pipe.
+ * Disables the vertical filter.
+ *
+ * This is required on modes more than 1024 pixels wide */
+# define TV_V_FILTER_BYPASS		(1 << 29)
+/** Enables adaptive vertical filtering */
+# define TV_VADAPT			(1 << 28)
+# define TV_VADAPT_MODE_MASK		(3 << 26)
+/** Selects the least adaptive vertical filtering mode */
+# define TV_VADAPT_MODE_LEAST		(0 << 26)
+/** Selects the moderately adaptive vertical filtering mode */
+# define TV_VADAPT_MODE_MODERATE	(1 << 26)
+/** Selects the most adaptive vertical filtering mode */
+# define TV_VADAPT_MODE_MOST		(3 << 26)
+/**
+ * Sets the horizontal scaling factor.
+ *
+ * This should be the fractional part of the horizontal scaling factor divided
+ * by the oversampling rate.  TV_HSCALE should be less than 1, and set to:
+ *
+ * (src width - 1) / ((oversample * dest width) - 1)
  */
-# define LVDS_PORT_EN			(1 << 31)
-/** Selects pipe B for LVDS data.  Must be set on pre-965. */
-# define LVDS_PIPEB_SELECT		(1 << 30)
+# define TV_HSCALE_FRAC_MASK		0x00003fff
+# define TV_HSCALE_FRAC_SHIFT		0
 
+#define TV_FILTER_CTL_2		0x68084
 /**
- * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
- * pixel.
+ * Sets the integer part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1)
  */
-# define LVDS_A0A2_CLKA_POWER_MASK	(3 << 8)
-# define LVDS_A0A2_CLKA_POWER_DOWN	(0 << 8)
-# define LVDS_A0A2_CLKA_POWER_UP	(3 << 8)
+# define TV_VSCALE_INT_MASK		0x00038000
+# define TV_VSCALE_INT_SHIFT		15
 /**
- * Controls the A3 data pair, which contains the additional LSBs for 24 bit
- * mode.  Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be
- * on.
+ * Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * \sa TV_VSCALE_INT_MASK
  */
-# define LVDS_A3_POWER_MASK		(3 << 6)
-# define LVDS_A3_POWER_DOWN		(0 << 6)
-# define LVDS_A3_POWER_UP		(3 << 6)
+# define TV_VSCALE_FRAC_MASK		0x00007fff
+# define TV_VSCALE_FRAC_SHIFT		0
+
+#define TV_FILTER_CTL_3		0x68088
 /**
- * Controls the CLKB pair.  This should only be set when LVDS_B0B3_POWER_UP
- * is set.
+ * Sets the integer part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1))
+ *
+ * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
  */
-# define LVDS_CLKB_POWER_MASK		(3 << 4)
-# define LVDS_CLKB_POWER_DOWN		(0 << 4)
-# define LVDS_CLKB_POWER_UP		(3 << 4)
+# define TV_VSCALE_IP_INT_MASK		0x00038000
+# define TV_VSCALE_IP_INT_SHIFT		15
+/**
+ * Sets the fractional part of the 3.15 fixed-point vertical scaling factor.
+ *
+ * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes.
+ *
+ * \sa TV_VSCALE_IP_INT_MASK
+ */
+# define TV_VSCALE_IP_FRAC_MASK		0x00007fff
+# define TV_VSCALE_IP_FRAC_SHIFT		0
 
+#define TV_CC_CONTROL		0x68090
+# define TV_CC_ENABLE			(1 << 31)
 /**
- * Controls the B0-B3 data pairs.  This must be set to match the DPLL p2
- * setting for whether we are in dual-channel mode.  The B3 pair will
- * additionally only be powered up when LVDS_A3_POWER_UP is set.
+ * Specifies which field to send the CC data in.
+ *
+ * CC data is usually sent in field 0.
  */
-# define LVDS_B0B3_POWER_MASK		(3 << 2)
-# define LVDS_B0B3_POWER_DOWN		(0 << 2)
-# define LVDS_B0B3_POWER_UP		(3 << 2)
-
-#define PIPEACONF 0x70008
-#define PIPEACONF_ENABLE	(1<<31)
-#define PIPEACONF_DISABLE	0
-#define PIPEACONF_DOUBLE_WIDE	(1<<30)
-#define I965_PIPECONF_ACTIVE	(1<<30)
-#define PIPEACONF_SINGLE_WIDE	0
-#define PIPEACONF_PIPE_UNLOCKED 0
-#define PIPEACONF_PIPE_LOCKED	(1<<25)
-#define PIPEACONF_PALETTE	0
-#define PIPEACONF_GAMMA		(1<<24)
-#define PIPECONF_FORCE_BORDER	(1<<25)
-#define PIPECONF_PROGRESSIVE	(0 << 21)
-#define PIPECONF_INTERLACE_W_FIELD_INDICATION	(6 << 21)
-#define PIPECONF_INTERLACE_FIELD_0_ONLY		(7 << 21)
-
-#define DSPARB	  0x70030
-#define DSPARB_CSTART_MASK	(0x7f << 7)
-#define DSPARB_CSTART_SHIFT	7
-#define DSPARB_BSTART_MASK	(0x7f)		 
-#define DSPARB_BSTART_SHIFT	0
-
-#define PIPEBCONF 0x71008
-#define PIPEBCONF_ENABLE	(1<<31)
-#define PIPEBCONF_DISABLE	0
-#define PIPEBCONF_DOUBLE_WIDE	(1<<30)
-#define PIPEBCONF_DISABLE	0
-#define PIPEBCONF_GAMMA		(1<<24)
-#define PIPEBCONF_PALETTE	0
-
-#define PIPEBGCMAXRED		0x71010
-#define PIPEBGCMAXGREEN		0x71014
-#define PIPEBGCMAXBLUE		0x71018
+# define TV_CC_FID_MASK			(1 << 27)
+# define TV_CC_FID_SHIFT		27
+/** Sets the horizontal position of the CC data.  Usually 135. */
+# define TV_CC_HOFF_MASK		0x03ff0000
+# define TV_CC_HOFF_SHIFT		16
+/** Sets the vertical position of the CC data.  Usually 21 */
+# define TV_CC_LINE_MASK		0x0000003f
+# define TV_CC_LINE_SHIFT		0
+
+#define TV_CC_DATA		0x68094
+# define TV_CC_RDY			(1 << 31)
+/** Second word of CC data to be transmitted. */
+# define TV_CC_DATA_2_MASK		0x007f0000
+# define TV_CC_DATA_2_SHIFT		16
+/** First word of CC data to be transmitted. */
+# define TV_CC_DATA_1_MASK		0x0000007f
+# define TV_CC_DATA_1_SHIFT		0
+
+#define TV_H_LUMA_0		0x68100
+#define TV_H_LUMA_59		0x681ec
+#define TV_H_CHROMA_0		0x68200
+#define TV_H_CHROMA_59		0x682ec
+#define TV_V_LUMA_0		0x68300
+#define TV_V_LUMA_42		0x683a8
+#define TV_V_CHROMA_0		0x68400
+#define TV_V_CHROMA_42		0x684a8
+
+/* Display & cursor control */
+
+/* Pipe A */
+#define PIPEADSL		0x70000
+#define PIPEACONF		 0x70008
+#define   PIPEACONF_ENABLE	(1<<31)
+#define   PIPEACONF_DISABLE	0
+#define   PIPEACONF_DOUBLE_WIDE	(1<<30)
+#define   I965_PIPECONF_ACTIVE	(1<<30)
+#define   PIPEACONF_SINGLE_WIDE	0
+#define   PIPEACONF_PIPE_UNLOCKED 0
+#define   PIPEACONF_PIPE_LOCKED	(1<<25)
+#define   PIPEACONF_PALETTE	0
+#define   PIPEACONF_GAMMA		(1<<24)
+#define   PIPECONF_FORCE_BORDER	(1<<25)
+#define   PIPECONF_PROGRESSIVE	(0 << 21)
+#define   PIPECONF_INTERLACE_W_FIELD_INDICATION	(6 << 21)
+#define   PIPECONF_INTERLACE_FIELD_0_ONLY		(7 << 21)
+#define PIPEASTAT		0x70024
+#define   PIPE_FIFO_UNDERRUN_STATUS		(1UL<<31)
+#define   PIPE_CRC_ERROR_ENABLE			(1UL<<29)
+#define   PIPE_CRC_DONE_ENABLE			(1UL<<28)
+#define   PIPE_GMBUS_EVENT_ENABLE		(1UL<<27)
+#define   PIPE_HOTPLUG_INTERRUPT_ENABLE		(1UL<<26)
+#define   PIPE_VSYNC_INTERRUPT_ENABLE		(1UL<<25)
+#define   PIPE_DISPLAY_LINE_COMPARE_ENABLE	(1UL<<24)
+#define   PIPE_DPST_EVENT_ENABLE		(1UL<<23)
+#define   PIPE_LEGACY_BLC_EVENT_ENABLE		(1UL<<22)
+#define   PIPE_ODD_FIELD_INTERRUPT_ENABLE	(1UL<<21)
+#define   PIPE_EVEN_FIELD_INTERRUPT_ENABLE	(1UL<<20)
+#define   PIPE_HOTPLUG_TV_INTERRUPT_ENABLE	(1UL<<18) /* pre-965 */
+#define   PIPE_START_VBLANK_INTERRUPT_ENABLE	(1UL<<18) /* 965 or later */
+#define   PIPE_VBLANK_INTERRUPT_ENABLE		(1UL<<17)
+#define   PIPE_OVERLAY_UPDATED_ENABLE		(1UL<<16)
+#define   PIPE_CRC_ERROR_INTERRUPT_STATUS	(1UL<<13)
+#define   PIPE_CRC_DONE_INTERRUPT_STATUS	(1UL<<12)
+#define   PIPE_GMBUS_INTERRUPT_STATUS		(1UL<<11)
+#define   PIPE_HOTPLUG_INTERRUPT_STATUS		(1UL<<10)
+#define   PIPE_VSYNC_INTERRUPT_STATUS		(1UL<<9)
+#define   PIPE_DISPLAY_LINE_COMPARE_STATUS	(1UL<<8)
+#define   PIPE_DPST_EVENT_STATUS		(1UL<<7)
+#define   PIPE_LEGACY_BLC_EVENT_STATUS		(1UL<<6)
+#define   PIPE_ODD_FIELD_INTERRUPT_STATUS	(1UL<<5)
+#define   PIPE_EVEN_FIELD_INTERRUPT_STATUS	(1UL<<4)
+#define   PIPE_HOTPLUG_TV_INTERRUPT_STATUS	(1UL<<2) /* pre-965 */
+#define   PIPE_START_VBLANK_INTERRUPT_STATUS	(1UL<<2) /* 965 or later */
+#define   PIPE_VBLANK_INTERRUPT_STATUS		(1UL<<1)
+#define   PIPE_OVERLAY_UPDATED_STATUS		(1UL<<0)
+
+#define DSPARB			0x70030
+#define   DSPARB_CSTART_MASK	(0x7f << 7)
+#define   DSPARB_CSTART_SHIFT	7
+#define   DSPARB_BSTART_MASK	(0x7f)		 
+#define   DSPARB_BSTART_SHIFT	0
+/*
+ * The two pipe frame counter registers are not synchronized, so
+ * reading a stable value is somewhat tricky. The following code 
+ * should work:
+ *
+ *  do {
+ *    high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
+ *             PIPE_FRAME_HIGH_SHIFT;
+ *    low1 =  ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >>
+ *             PIPE_FRAME_LOW_SHIFT);
+ *    high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
+ *             PIPE_FRAME_HIGH_SHIFT);
+ *  } while (high1 != high2);
+ *  frame = (high1 << 8) | low1;
+ */
+#define PIPEAFRAMEHIGH          0x70040
+#define   PIPE_FRAME_HIGH_MASK    0x0000ffff
+#define   PIPE_FRAME_HIGH_SHIFT   0
+#define PIPEAFRAMEPIXEL         0x70044
+#define   PIPE_FRAME_LOW_MASK     0xff000000
+#define   PIPE_FRAME_LOW_SHIFT    24
+#define   PIPE_PIXEL_MASK         0x00ffffff
+#define   PIPE_PIXEL_SHIFT        0
+
+/* Cursor A & B regs */
+#define CURACNTR		0x70080
+#define   CURSOR_MODE_DISABLE   0x00
+#define   CURSOR_MODE_64_32B_AX 0x07
+#define   CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX)
+#define   MCURSOR_GAMMA_ENABLE  (1 << 26)
+#define CURABASE		0x70084
+#define CURAPOS			0x70088
+#define   CURSOR_POS_MASK       0x007FF
+#define   CURSOR_POS_SIGN       0x8000
+#define   CURSOR_X_SHIFT        0
+#define   CURSOR_Y_SHIFT        16
+#define CURBCNTR		0x700c0
+#define CURBBASE		0x700c4
+#define CURBPOS			0x700c8
+
+/* Display A control */
+#define DSPACNTR                0x70180
+#define   DISPLAY_PLANE_ENABLE			(1<<31)
+#define   DISPLAY_PLANE_DISABLE			0
+#define   DISPPLANE_GAMMA_ENABLE		(1<<30)
+#define   DISPPLANE_GAMMA_DISABLE		0
+#define   DISPPLANE_PIXFORMAT_MASK		(0xf<<26)
+#define   DISPPLANE_8BPP			(0x2<<26)
+#define   DISPPLANE_15_16BPP			(0x4<<26)
+#define   DISPPLANE_16BPP			(0x5<<26)
+#define   DISPPLANE_32BPP_NO_ALPHA		(0x6<<26)
+#define   DISPPLANE_32BPP			(0x7<<26)
+#define   DISPPLANE_STEREO_ENABLE		(1<<25)
+#define   DISPPLANE_STEREO_DISABLE		0
+#define   DISPPLANE_SEL_PIPE_MASK		(1<<24)
+#define   DISPPLANE_SEL_PIPE_A			0
+#define   DISPPLANE_SEL_PIPE_B			(1<<24)
+#define   DISPPLANE_SRC_KEY_ENABLE		(1<<22)
+#define   DISPPLANE_SRC_KEY_DISABLE		0
+#define   DISPPLANE_LINE_DOUBLE			(1<<20)
+#define   DISPPLANE_NO_LINE_DOUBLE		0
+#define   DISPPLANE_STEREO_POLARITY_FIRST	0
+#define   DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
+#define DSPAADDR		0x70184
+#define DSPASTRIDE		0x70188
+#define DSPAPOS			0x7018C /* reserved */
+#define DSPASIZE		0x70190
+#define DSPASURF		0x7019C /* 965+ only */
+#define DSPATILEOFF		0x701A4 /* 965+ only */
+
+/* VBIOS flags */
+#define SWF00			0x71410
+#define SWF01			0x71414
+#define SWF02			0x71418
+#define SWF03			0x7141c
+#define SWF04			0x71420
+#define SWF05			0x71424
+#define SWF06			0x71428
+#define SWF10			0x70410
+#define SWF11			0x70414
+#define SWF14			0x71420
+#define SWF30			0x72414
+#define SWF31			0x72418
+#define SWF32			0x7241c
+
+/* Pipe B */
+#define PIPEBDSL		0x71000
+#define PIPEBCONF		0x71008
 #define PIPEBSTAT		0x71024
 #define PIPEBFRAMEHIGH		0x71040
 #define PIPEBFRAMEPIXEL		0x71044
 
-#define DSPACNTR		0x70180
+/* Display B control */
 #define DSPBCNTR		0x71180
-#define DISPLAY_PLANE_ENABLE			(1<<31)
-#define DISPLAY_PLANE_DISABLE			0
-#define DISPPLANE_GAMMA_ENABLE			(1<<30)
-#define DISPPLANE_GAMMA_DISABLE			0
-#define DISPPLANE_PIXFORMAT_MASK		(0xf<<26)
-#define DISPPLANE_8BPP				(0x2<<26)
-#define DISPPLANE_15_16BPP			(0x4<<26)
-#define DISPPLANE_16BPP				(0x5<<26)
-#define DISPPLANE_32BPP_NO_ALPHA		(0x6<<26)
-#define DISPPLANE_32BPP				(0x7<<26)
-#define DISPPLANE_STEREO_ENABLE			(1<<25)
-#define DISPPLANE_STEREO_DISABLE		0
-#define DISPPLANE_SEL_PIPE_MASK			(1<<24)
-#define DISPPLANE_SEL_PIPE_A			0
-#define DISPPLANE_SEL_PIPE_B			(1<<24)
-#define DISPPLANE_SRC_KEY_ENABLE		(1<<22)
-#define DISPPLANE_SRC_KEY_DISABLE		0
-#define DISPPLANE_LINE_DOUBLE			(1<<20)
-#define DISPPLANE_NO_LINE_DOUBLE		0
-#define DISPPLANE_STEREO_POLARITY_FIRST		0
-#define DISPPLANE_STEREO_POLARITY_SECOND	(1<<18)
-/* plane B only */
-#define DISPPLANE_ALPHA_TRANS_ENABLE		(1<<15)
-#define DISPPLANE_ALPHA_TRANS_DISABLE		0
-#define DISPPLANE_SPRITE_ABOVE_DISPLAYA		0
-#define DISPPLANE_SPRITE_ABOVE_OVERLAY		(1)
-
-#define DSPABASE		0x70184
-#define DSPASTRIDE		0x70188
-
-#define DSPBBASE		0x71184
-#define DSPBADDR		DSPBBASE
+#define   DISPPLANE_ALPHA_TRANS_ENABLE		(1<<15)
+#define   DISPPLANE_ALPHA_TRANS_DISABLE		0
+#define   DISPPLANE_SPRITE_ABOVE_DISPLAY	0
+#define   DISPPLANE_SPRITE_ABOVE_OVERLAY	(1)
+#define DSPBADDR		0x71184
 #define DSPBSTRIDE		0x71188
-
-#define DSPAKEYVAL		0x70194
-#define DSPAKEYMASK		0x70198
-
-#define DSPAPOS			0x7018C /* reserved */
-#define DSPASIZE		0x70190
 #define DSPBPOS			0x7118C
 #define DSPBSIZE		0x71190
-
-#define DSPASURF		0x7019C
-#define DSPATILEOFF		0x701A4
-
 #define DSPBSURF		0x7119C
 #define DSPBTILEOFF		0x711A4
 
+/* VBIOS regs */
 #define VGACNTRL		0x71400
 # define VGA_DISP_DISABLE			(1 << 31)
 # define VGA_2X_MODE				(1 << 30)
 # define VGA_PIPE_B_SELECT			(1 << 29)
 
-/*
- * Some BIOS scratch area registers.  The 845 (and 830?) store the amount
- * of video memory available to the BIOS in SWF1.
- */
-
-#define SWF0			0x71410
-
-/*
- * 855 scratch registers.
- */
-#define SWF10			0x70410
-
-#define SWF30			0x72414
-
-/*
- * Overlay registers.  These are overlay registers accessed via MMIO.
- * Those loaded via the overlay register page are defined in i830_video.c.
- */
-#define OVADD			0x30000
-
-#define DOVSTA			0x30008
-#define OC_BUF			(0x3<<20)
-
-#define OGAMC5			0x30010
-#define OGAMC4			0x30014
-#define OGAMC3			0x30018
-#define OGAMC2			0x3001c
-#define OGAMC1			0x30020
-#define OGAMC0			0x30024
-/*
- * Palette registers
- */
-#define PALETTE_A		0x0a000
-#define PALETTE_B		0x0a800
+/* Chipset type macros */
 
 #define IS_I830(dev) ((dev)->pci_device == 0x3577)
 #define IS_845G(dev) ((dev)->pci_device == 0x2562)
@@ -1282,11 +1794,18 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 		       (dev)->pci_device == 0x29A2 || \
 		       (dev)->pci_device == 0x2A02 || \
 		       (dev)->pci_device == 0x2A12 || \
-		       (dev)->pci_device == 0x2A42)
+		       (dev)->pci_device == 0x2A42 || \
+		       (dev)->pci_device == 0x2E02 || \
+		       (dev)->pci_device == 0x2E12 || \
+		       (dev)->pci_device == 0x2E22)
 
 #define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
 
-#define IS_IGD_GM(dev) ((dev)->pci_device == 0x2A42)
+#define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
+
+#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
+		     (dev)->pci_device == 0x2E12 || \
+		     (dev)->pci_device == 0x2E22)
 
 #define IS_G33(dev)    ((dev)->pci_device == 0x29C2 ||	\
 			(dev)->pci_device == 0x29B2 ||	\
@@ -1296,10 +1815,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
 		      IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev))
 
 #define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \
-			IS_I945GM(dev) || IS_I965GM(dev) || IS_IGD_GM(dev))
-
-#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev))
+			IS_I945GM(dev) || IS_I965GM(dev) || IS_GM45(dev))
 
-#define PRIMARY_RINGBUFFER_SIZE         (128*1024)
+#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_GM45(dev) || IS_G4X(dev))
 
 #endif
diff --git a/sys/dev/pci/drm/i915_irq.c b/sys/dev/pci/drm/i915_irq.c
index da87dbcc45c..28f9f6af9ec 100644
--- a/sys/dev/pci/drm/i915_irq.c
+++ b/sys/dev/pci/drm/i915_irq.c
@@ -162,11 +162,11 @@ static void i915_vblank_tasklet(struct drm_device *dev)
 	u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24);
 	RING_LOCALS;
 	
-	if (sarea_priv->front_tiled) {
+	if (IS_I965G(dev) && sarea_priv->front_tiled) {
 		cmd |= XY_SRC_COPY_BLT_DST_TILED;
 		dst_pitch >>= 2;
 	}
-	if (sarea_priv->back_tiled) {
+	if (IS_I965G(dev) && sarea_priv->back_tiled) {
 		cmd |= XY_SRC_COPY_BLT_SRC_TILED;
 		src_pitch >>= 2;
 	}
@@ -443,17 +443,17 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 	u32 pipea_stats, pipeb_stats;
 	int vblank = 0;
 
-	iir = I915_READ(I915REG_INT_IDENTITY_R);
+	iir = I915_READ(IIR);
 #if 0
 	DRM_DEBUG("flag=%08x\n", iir);
 #endif
 	if (iir == 0) {
 		DRM_DEBUG ("iir 0x%08x im 0x%08x ie 0x%08x pipea 0x%08x pipeb 0x%08x\n",
 			   iir,
-			   I915_READ(I915REG_INT_MASK_R),
-			   I915_READ(I915REG_INT_ENABLE_R),
-			   I915_READ(I915REG_PIPEASTAT),
-			   I915_READ(I915REG_PIPEBSTAT));
+			   I915_READ(IMR),
+			   I915_READ(IER),
+			   I915_READ(PIPEASTAT),
+			   I915_READ(PIPEBSTAT));
 		return IRQ_NONE;
 	}
 
@@ -462,31 +462,32 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
 	 * we may get extra interrupts.
 	 */
 	if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) {
-		pipea_stats = I915_READ(I915REG_PIPEASTAT);
-		if (pipea_stats & (I915_START_VBLANK_INTERRUPT_STATUS|
-				   I915_VBLANK_INTERRUPT_STATUS))
+		pipea_stats = I915_READ(PIPEASTAT);
+		if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
+				   PIPE_VBLANK_INTERRUPT_STATUS))
 		{
 			vblank++;
 			drm_handle_vblank(dev, i915_get_plane(dev, 0));
 		}
-		I915_WRITE(I915REG_PIPEASTAT, pipea_stats);
+
+		I915_WRITE(PIPEASTAT, pipea_stats);
 	}
 	if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) {
-		pipeb_stats = I915_READ(I915REG_PIPEBSTAT);
-		if (pipeb_stats & (I915_START_VBLANK_INTERRUPT_STATUS|
-				   I915_VBLANK_INTERRUPT_STATUS))
+		pipeb_stats = I915_READ(PIPEBSTAT);
+		if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS|
+				   PIPE_VBLANK_INTERRUPT_STATUS))
 		{
 			vblank++;
 			drm_handle_vblank(dev, i915_get_plane(dev, 1));
 		}
-		I915_WRITE(I915REG_PIPEBSTAT, pipeb_stats);
+		I915_WRITE(PIPEBSTAT, pipeb_stats);
 	}
 
 	if (dev_priv->sarea_priv)
 	    dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
 
-	I915_WRITE(I915REG_INT_IDENTITY_R, iir);
-	(void) I915_READ(I915REG_INT_IDENTITY_R); /* Flush posted write */
+	I915_WRITE(IIR, iir);
+	(void) I915_READ(IIR);
 
 	if (iir & I915_USER_INTERRUPT) {
 		DRM_WAKEUP(&dev_priv->irq_queue);
@@ -516,7 +517,7 @@ int i915_emit_irq(struct drm_device *dev)
 
 	BEGIN_LP_RING(2);
 	OUT_RING(0);
-	OUT_RING(GFX_OP_USER_INTERRUPT);
+	OUT_RING(MI_USER_INTERRUPT);
 	ADVANCE_LP_RING();
 
 	return dev_priv->counter;
@@ -527,7 +528,7 @@ void i915_user_irq_on(drm_i915_private_t *dev_priv)
 	DRM_SPINLOCK(&dev_priv->user_irq_lock);
 	if (dev_priv->irq_enabled && (++dev_priv->user_irq_refcount == 1)){
 		dev_priv->irq_enable_reg |= I915_USER_INTERRUPT;
-		I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
+		I915_WRITE(IER, dev_priv->irq_enable_reg);
 	}
 	DRM_SPINUNLOCK(&dev_priv->user_irq_lock);
 
@@ -537,8 +538,8 @@ void i915_user_irq_off(drm_i915_private_t *dev_priv)
 {
 	DRM_SPINLOCK(&dev_priv->user_irq_lock);
 	if (dev_priv->irq_enabled && (--dev_priv->user_irq_refcount == 0)) {
-		//		dev_priv->irq_enable_reg &= ~USER_INT_FLAG;
-		//		I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
+		//		dev_priv->irq_enable_reg &= ~I915_USER_INTERRUPT;
+		//		I915_WRITE(IER, dev_priv->irq_enable_reg);
 	}
 	DRM_SPINUNLOCK(&dev_priv->user_irq_lock);
 }
@@ -622,11 +623,11 @@ int i915_enable_vblank(struct drm_device *dev, int plane)
 
 	switch (pipe) {
 	case 0:
-		pipestat_reg = I915REG_PIPEASTAT;
+		pipestat_reg = PIPEASTAT;
 		dev_priv->irq_enable_reg |= I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
 		break;
 	case 1:
-		pipestat_reg = I915REG_PIPEBSTAT;
+		pipestat_reg = PIPEBSTAT;
 		dev_priv->irq_enable_reg |= I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
 		break;
 	default:
@@ -643,17 +644,17 @@ int i915_enable_vblank(struct drm_device *dev, int plane)
 		 * but 
 		 */
 		if (IS_I965G (dev))
-			pipestat |= I915_START_VBLANK_INTERRUPT_ENABLE;
+			pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE;
 		else
-			pipestat |= I915_VBLANK_INTERRUPT_ENABLE;
+			pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE;
 		/*
 		 * Clear any pending status
 		 */
-		pipestat |= (I915_START_VBLANK_INTERRUPT_STATUS |
-			     I915_VBLANK_INTERRUPT_STATUS);
+		pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
+			     PIPE_VBLANK_INTERRUPT_STATUS);
 		I915_WRITE(pipestat_reg, pipestat);
 	}
-	I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
+	I915_WRITE(IER, dev_priv->irq_enable_reg);
 
 	return 0;
 }
@@ -667,11 +668,11 @@ void i915_disable_vblank(struct drm_device *dev, int plane)
 
 	switch (pipe) {
 	case 0:
-		pipestat_reg = I915REG_PIPEASTAT;
+		pipestat_reg = PIPEASTAT;
 		dev_priv->irq_enable_reg &= ~I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
 		break;
 	case 1:
-		pipestat_reg = I915REG_PIPEBSTAT;
+		pipestat_reg = PIPEBSTAT;
 		dev_priv->irq_enable_reg &= ~I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
 		break;
 	default:
@@ -680,17 +681,18 @@ void i915_disable_vblank(struct drm_device *dev, int plane)
 		break;
 	}
 
-	I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
+	I915_WRITE(IER, dev_priv->irq_enable_reg);
+
 	if (pipestat_reg)
 	{
 		pipestat = I915_READ (pipestat_reg);
-		pipestat &= ~(I915_START_VBLANK_INTERRUPT_ENABLE |
-			      I915_VBLANK_INTERRUPT_ENABLE);
+		pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE |
+			      PIPE_VBLANK_INTERRUPT_ENABLE);
 		/*
 		 * Clear any pending status
 		 */
-		pipestat |= (I915_START_VBLANK_INTERRUPT_STATUS |
-			     I915_VBLANK_INTERRUPT_STATUS);
+		pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS |
+			     PIPE_VBLANK_INTERRUPT_STATUS);
 		I915_WRITE(pipestat_reg, pipestat);
 	}
 }
@@ -701,7 +703,7 @@ static void i915_enable_interrupt (struct drm_device *dev)
 	
 	dev_priv->irq_enable_reg |= I915_USER_INTERRUPT;
 
-	I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
+	I915_WRITE(IER, dev_priv->irq_enable_reg);
 	dev_priv->irq_enabled = 1;
 }
 
@@ -740,7 +742,8 @@ int i915_vblank_pipe_get(struct drm_device *dev, void *data,
 		return -EINVAL;
 	}
 
-	flag = I915_READ(I915REG_INT_ENABLE_R);
+	flag = I915_READ(IER);
+
 	pipe->pipe = 0;
 	if (flag & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT)
 		pipe->pipe |= DRM_I915_VBLANK_PIPE_A;
@@ -910,9 +913,9 @@ void i915_driver_irq_preinstall(struct drm_device * dev)
 {
 	drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
 
-	I915_WRITE16(I915REG_HWSTAM, 0xeffe);
-	I915_WRITE16(I915REG_INT_MASK_R, 0x0);
-	I915_WRITE16(I915REG_INT_ENABLE_R, 0x0);
+	I915_WRITE16(HWSTAM, 0xeffe);
+	I915_WRITE16(IMR, 0x0);
+	I915_WRITE16(IER, 0x0);
 }
 
 int i915_driver_irq_postinstall(struct drm_device * dev)
@@ -924,11 +927,7 @@ int i915_driver_irq_postinstall(struct drm_device * dev)
 	INIT_LIST_HEAD(&dev_priv->vbl_swaps.head);
 	dev_priv->swaps_pending = 0;
 
-#ifdef __OpenBSD__
-	mtx_init(&dev_priv->user_irq_lock, IPL_NONE);
-#else
 	DRM_SPININIT(&dev_priv->user_irq_lock, "userirq");
-#endif
 	dev_priv->user_irq_refcount = 0;
 	dev_priv->irq_enable_reg = 0;
 
@@ -945,7 +944,7 @@ int i915_driver_irq_postinstall(struct drm_device * dev)
 	 * Initialize the hardware status page IRQ location.
 	 */
 
-	I915_WRITE(I915REG_INSTPM, (1 << 5) | (1 << 21));
+	I915_WRITE(INSTPM, (1 << 5) | (1 << 21));
 	return 0;
 }
 
@@ -958,14 +957,14 @@ void i915_driver_irq_uninstall(struct drm_device * dev)
 		return;
 
 	dev_priv->irq_enabled = 0;
-	I915_WRITE(I915REG_HWSTAM, 0xffffffff);
-	I915_WRITE(I915REG_INT_MASK_R, 0xffffffff);
-	I915_WRITE(I915REG_INT_ENABLE_R, 0x0);
-
-	temp = I915_READ(I915REG_PIPEASTAT);
-	I915_WRITE(I915REG_PIPEASTAT, temp);
-	temp = I915_READ(I915REG_PIPEBSTAT);
-	I915_WRITE(I915REG_PIPEBSTAT, temp);
-	temp = I915_READ(I915REG_INT_IDENTITY_R);
-	I915_WRITE(I915REG_INT_IDENTITY_R, temp);
+	I915_WRITE(HWSTAM, 0xffffffff);
+	I915_WRITE(IMR, 0xffffffff);
+	I915_WRITE(IER, 0x0);
+
+	temp = I915_READ(PIPEASTAT);
+	I915_WRITE(PIPEASTAT, temp);
+	temp = I915_READ(PIPEBSTAT);
+	I915_WRITE(PIPEBSTAT, temp);
+	temp = I915_READ(IIR);
+	I915_WRITE(IIR, temp);
 }