remove mpt. it has since been replaced with mpi, which is a smaller and

cleaner driver that supports more hardware.

8 files changed, 1 insertions, 10204 deletions

diff --git a/sys/dev/ic/mpt.c b/sys/dev/ic/mpt.c
deleted file mode 100644
index a33a79425f0..00000000000
--- a/sys/dev/ic/mpt.c
+++ /dev/null
@@ -1,2018 +0,0 @@
-/*	$OpenBSD: mpt.c,v 1.24 2006/02/11 01:20:43 krw Exp $	*/
-/*	$NetBSD: mpt.c,v 1.4 2003/11/02 11:07:45 wiz Exp $	*/
-
-/*
- * Copyright (c) 2000, 2001 by Greg Ansley
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice immediately at the beginning of the file, without modification,
- *    this list of conditions, and the following disclaimer.
- * 2. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-/*
- * Additional Copyright (c) 2002 by Matthew Jacob under same license.
- */
-
-/*
- * mpt.c:
- *
- * Generic routines for LSI Fusion adapters.
- *
- * Adapted from the FreeBSD "mpt" driver by Jason R. Thorpe for
- * Wasabi Systems, Inc.
- */
-
-#include <sys/cdefs.h>
-/* __KERNEL_RCSID(0, "$NetBSD: mpt.c,v 1.4 2003/11/02 11:07:45 wiz Exp $"); */
-
-#include <dev/ic/mpt.h>
-
-#define MPT_MAX_TRIES 3
-#define MPT_MAX_WAIT 300000
-
-static int	maxwait_ack = 0;
-static int	maxwait_int = 0;
-static int	maxwait_state = 0;
-
-#ifdef MPT_DEBUG
-int		mpt_debug = 11;
-#endif /* MPT_DEBUG */
-
-__inline u_int32_t mpt_rd_db(struct mpt_softc *);
-__inline u_int32_t mpt_rd_intr(struct mpt_softc *);
-int mpt_wait_db_ack(struct mpt_softc *);
-int mpt_wait_db_int(struct mpt_softc *);
-int mpt_wait_state(struct mpt_softc *, enum DB_STATE_BITS);
-int mpt_get_iocfacts(struct mpt_softc *, MSG_IOC_FACTS_REPLY *);
-int mpt_get_portfacts(struct mpt_softc *, MSG_PORT_FACTS_REPLY *);
-int mpt_send_ioc_init(struct mpt_softc *, u_int32_t);
-#ifdef MPT_DEBUG
-void mpt_print_header(struct mpt_softc *, char *, CONFIG_PAGE_HEADER *);
-#endif /* MPT_DEBUG */
-int mpt_read_config_info_mfg(struct mpt_softc *);
-int mpt_read_config_info_iou(struct mpt_softc *);
-int mpt_read_config_info_ioc(struct mpt_softc *);
-int mpt_read_config_info_raid(struct mpt_softc *);
-int mpt_read_config_info_spi(struct mpt_softc *);
-int mpt_set_initial_config_spi(struct mpt_softc *);
-int mpt_send_port_enable(struct mpt_softc *, int);
-int mpt_send_event_request(struct mpt_softc *, int);
-
-__inline u_int32_t
-mpt_rd_db(struct mpt_softc *mpt)
-{
-	return mpt_read(mpt, MPT_OFFSET_DOORBELL);
-}
-
-__inline u_int32_t
-mpt_rd_intr(struct mpt_softc *mpt)
-{
-	return mpt_read(mpt, MPT_OFFSET_INTR_STATUS);
-}
-
-/* Busy wait for a door bell to be read by IOC */
-int
-mpt_wait_db_ack(struct mpt_softc *mpt)
-{
-	int i;
-	for (i=0; i < MPT_MAX_WAIT; i++) {
-		if (!MPT_DB_IS_BUSY(mpt_rd_intr(mpt))) {
-			maxwait_ack = i > maxwait_ack ? i : maxwait_ack;
-			return MPT_OK;
-		}
-
-		DELAY(100);
-	}
-	return MPT_FAIL;
-}
-
-/* Busy wait for a door bell interrupt */
-int
-mpt_wait_db_int(struct mpt_softc *mpt)
-{
-	int i;
-	for (i=0; i < MPT_MAX_WAIT; i++) {
-		if (MPT_DB_INTR(mpt_rd_intr(mpt))) {
-			maxwait_int = i > maxwait_int ? i : maxwait_int;
-			return MPT_OK;
-		}
-		DELAY(100);
-	}
-	return MPT_FAIL;
-}
-
-/* Wait for IOC to transition to a give state */
-void
-mpt_check_doorbell(struct mpt_softc *mpt)
-{
-	u_int32_t db = mpt_rd_db(mpt);
-
-	/* prepare this function for error path */
-	/* if (MPT_STATE(db) != MPT_DB_STATE_RUNNING) { */
-	switch (MPT_STATE(db)) {
-		case MPT_DB_STATE_FAULT:
-		case MPT_DB_STATE_READY:
-			/* 1030 needs reset, issue IOC_INIT */
-			/* FIXME */
-			if (mpt_init(mpt, MPT_DB_INIT_HOST) != 0)
-				panic("%s: Can't get MPT IOC operational",
-				    mpt->mpt_dev.dv_xname);
-			break;
-
-		default:
-			/* nothing done for now */
-			break;
-	}
-}
-
-/* Wait for IOC to transition to a give state */
-int
-mpt_wait_state(struct mpt_softc *mpt, enum DB_STATE_BITS state)
-{
-	int i;
-
-	for (i = 0; i < MPT_MAX_WAIT; i++) {
-		u_int32_t db = mpt_rd_db(mpt);
-		if (MPT_STATE(db) == state) {
-			maxwait_state = i > maxwait_state ? i : maxwait_state;
-			return (MPT_OK);
-		}
-		DELAY(100);
-	}
-	return (MPT_FAIL);
-}
-
-
-/* Issue the reset COMMAND to the IOC */
-int
-mpt_soft_reset(struct mpt_softc *mpt)
-{
-	DNPRINTF(10, "soft reset\n");
-
-	/* Have to use hard reset if we are not in Running state */
-	if (MPT_STATE(mpt_rd_db(mpt)) != MPT_DB_STATE_RUNNING) {
-		mpt_prt(mpt, "soft reset failed: device not running");
-		return MPT_FAIL;
-	}
-
-	/* If door bell is in use we don't have a chance of getting
-	 * a word in since the IOC probably crashed in message
-	 * processing. So don't waste our time.
-	 */
-	if (MPT_DB_IS_IN_USE(mpt_rd_db(mpt))) {
-		mpt_prt(mpt, "soft reset failed: doorbell wedged");
-		return MPT_FAIL;
-	}
-
-	/* Send the reset request to the IOC */
-	mpt_write(mpt, MPT_OFFSET_DOORBELL,
-	    MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET << MPI_DOORBELL_FUNCTION_SHIFT);
-	if (mpt_wait_db_ack(mpt) != MPT_OK) {
-		mpt_prt(mpt, "soft reset failed: ack timeout");
-		return MPT_FAIL;
-	}
-
-	/* Wait for the IOC to reload and come out of reset state */
-	if (mpt_wait_state(mpt, MPT_DB_STATE_READY) != MPT_OK) {
-		mpt_prt(mpt, "soft reset failed: device did not start running");
-		return MPT_FAIL;
-	}
-
-	return MPT_OK;
-}
-
-/* This is a magic diagnostic reset that resets all the ARM
- * processors in the chip.
- */
-void
-mpt_hard_reset(struct mpt_softc *mpt)
-{
-	u_int32_t	diag0;
-	int		count;
-
-	/* This extra read comes for the Linux source
-	 * released by LSI. It's function is undocumented!
-	 */
-	DNPRINTF(10, "hard reset\n");
-	mpt_read(mpt, MPT_OFFSET_FUBAR);
-
-	/* Enable diagnostic registers */
-	mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_1);
-	mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_2);
-	mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_3);
-	mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_4);
-	mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_5);
-
-	/* Diag. port is now active so we can now hit the reset bit */
-	mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC, MPT_DIAG_RESET_IOC);
-
-	DELAY(10000);
-
-	/* Disable Diagnostic Register */
-	mpt_write(mpt, MPT_OFFSET_SEQUENCE, 0xFF);
-
-	/* Restore the config register values */
-	/*   Hard resets are known to screw up the BAR for diagnostic
-	     memory accesses (Mem1). */
-	mpt_set_config_regs(mpt);
-	if (mpt->mpt2 != NULL) {
-		mpt_set_config_regs(mpt->mpt2);
-	}
-
-	/* Note that if there is no valid firmware to run, the doorbell will
-	   remain in the reset state (0x00000000) */
-
-	/* try to download firmware, if available */
-	if (mpt->fw) {
-		/* wait for the adapter to finish the reset */
-		for (count = 0; count < 30; count++) {
-			diag0 = mpt_read(mpt, MPI_DIAGNOSTIC_OFFSET);
-			mpt_prt(mpt, "diag0=%08x", diag0);
-			if (!(diag0 & MPI_DIAG_RESET_ADAPTER)) {
-				break;
-			}
-
-			/* wait 1 second */
-			DELAY(1000);
-		}
-		count = mpt_downloadboot(mpt);
-		if (count < 0) {
-			panic("firmware downloadboot failure (%d)!", count);
-		}
-	}
-}
-
-/*
- * Reset the IOC when needed. Try software command first then if needed
- * poke at the magic diagnostic reset. Note that a hard reset resets
- * *both* IOCs on dual function chips (FC929 && LSI1030) as well as
- * fouls up the PCI configuration registers.
- */
-int
-mpt_reset(struct mpt_softc *mpt)
-{
-	int ret;
-
-	/* Try a soft reset */
-	if ((ret = mpt_soft_reset(mpt)) != MPT_OK) {
-		/* Failed; do a hard reset */
-		mpt_hard_reset(mpt);
-
-		/* Wait for the IOC to reload and come out of reset state */
-		ret = mpt_wait_state(mpt, MPT_DB_STATE_READY);
-		if (ret != MPT_OK) {
-			mpt_prt(mpt, "failed to reset device");
-		}
-	}
-
-	return ret;
-}
-
-/* Return a command buffer to the free queue */
-void
-mpt_free_request(struct mpt_softc *mpt, struct req_entry *req)
-{
-	if (req == NULL || req != &mpt->request_pool[req->index]) {
-		panic("mpt_free_request bad req ptr");
-		return;
-	}
-	if (req->debug == REQ_FREE) {
-		/*
-		 * XXX MU this should not happen but do not corrupt the free
-		 * list if it does
-		 */
-		mpt_prt(mpt, "request %d already free", req->index);
-		return;
-	}
-	req->sequence = 0;
-	req->xfer = NULL;
-	req->debug = REQ_FREE;
-	SLIST_INSERT_HEAD(&mpt->request_free_list, req, link);
-}
-
-/* Initialize command buffer */
-void
-mpt_init_request(struct mpt_softc *mpt, struct req_entry *req)
-{
-	if (req == NULL || req != &mpt->request_pool[req->index]) {
-		panic("mpt_init_request bad req ptr");
-		return;
-	}
-	req->sequence = 0;
-	req->xfer = NULL;
-	req->debug = REQ_FREE;
-	SLIST_INSERT_HEAD(&mpt->request_free_list, req, link);
-}
-/* Get a command buffer from the free queue */
-struct req_entry *
-mpt_get_request(struct mpt_softc *mpt)
-{
-	struct req_entry *req;
-	req = SLIST_FIRST(&mpt->request_free_list);
-	if (req != NULL) {
-		if (req != &mpt->request_pool[req->index]) {
-			panic("mpt_get_request: corrupted request free list");
-		}
-		if (req->xfer != NULL) {
-			panic("mpt_get_request: corrupted request free list "
-			    "(xfer)");
-		}
-		SLIST_REMOVE_HEAD(&mpt->request_free_list, link);
-		req->debug = REQ_IN_PROGRESS;
-	}
-	return req;
-}
-
-/* Pass the command to the IOC */
-void
-mpt_send_cmd(struct mpt_softc *mpt, struct req_entry *req)
-{
-#ifdef MPT_DEBUG
-	u_int32_t *pReq = req->req_vbuf;
-
-	DNPRINTF(50, "%s: Send Request %d (0x%x):\n",
-	    DEVNAME(mpt), req->index, req->req_pbuf);
-	DNPRINTF(50, "%s: %08x %08x %08x %08x\n",
-	    DEVNAME(mpt), pReq[0], pReq[1], pReq[2], pReq[3]);
-	DNPRINTF(50, "%s: %08x %08x %08x %08x\n",
-	    DEVNAME(mpt), pReq[4], pReq[5], pReq[6], pReq[7]);
-	DNPRINTF(50, "%s: %08x %08x %08x %08x\n",
-	    DEVNAME(mpt), pReq[8], pReq[9], pReq[10], pReq[11]);
-	DNPRINTF(50, "%s: %08x %08x %08x %08x\n",
-	    DEVNAME(mpt), pReq[12], pReq[13], pReq[14], pReq[15]);
-#endif /* MPT_DEBUG */
-
-	req->sequence = mpt->sequence++;
-	MPT_SYNC_REQ(mpt, req, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
-
-	req->debug = REQ_ON_CHIP;
-	mpt_write(mpt, MPT_OFFSET_REQUEST_Q, (u_int32_t) req->req_pbuf);
-}
-
-/*
- * Give the reply buffer back to the IOC after we have
- * finished processing it.
- */
-void
-mpt_free_reply(struct mpt_softc *mpt, u_int32_t ptr)
-{
-	mpt_write(mpt, MPT_OFFSET_REPLY_Q, ptr);
-}
-
-/* Get a reply from the IOC */
-u_int32_t
-mpt_pop_reply_queue(struct mpt_softc *mpt)
-{
-	return mpt_read(mpt, MPT_OFFSET_REPLY_Q);
-}
-
-/*
- * Send a command to the IOC via the handshake register.
- *
- * Only done at initialization time and for certain unusual
- * commands such as device/bus reset as specified by LSI.
- */
-int
-mpt_send_handshake_cmd(struct mpt_softc *mpt, size_t len, void *cmd)
-{
-	int i;
-	u_int32_t data, *data32;
-
-	/* Check condition of the IOC */
-	data = mpt_rd_db(mpt);
-	if (((MPT_STATE(data) != MPT_DB_STATE_READY)	&&
-	    (MPT_STATE(data) != MPT_DB_STATE_RUNNING)	&&
-	    (MPT_STATE(data) != MPT_DB_STATE_FAULT))	||
-	    (MPT_DB_IS_IN_USE(data))) {
-		mpt_prt(mpt, "handshake aborted due to invalid doorbell state");
-#ifdef MPT_DEBUG
-		mpt_print_db(data);
-#endif /* MPT_DEBUG */
-		return(EBUSY);
-	}
-
-	/* We move things in 32 bit chunks */
-	len = (len + 3) >> 2;
-	data32 = cmd;
-
-	/* Clear any left over pending doorbell interrupts */
-	if (MPT_DB_INTR(mpt_rd_intr(mpt)))
-		mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0);
-
-	/*
-	 * Tell the handshake reg. we are going to send a command
-	 * and how long it is going to be.
-	 */
-	data = (MPI_FUNCTION_HANDSHAKE << MPI_DOORBELL_FUNCTION_SHIFT) |
-	    (len << MPI_DOORBELL_ADD_DWORDS_SHIFT);
-	mpt_write(mpt, MPT_OFFSET_DOORBELL, data);
-
-	/* Wait for the chip to notice */
-	if (mpt_wait_db_int(mpt) != MPT_OK) {
-		mpt_prt(mpt, "mpt_send_handshake_cmd timeout1");
-		return ETIMEDOUT;
-	}
-
-	/* Clear the interrupt */
-	mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0);
-
-	if (mpt_wait_db_ack(mpt) != MPT_OK) {
-		mpt_prt(mpt, "mpt_send_handshake_cmd timeout2");
-		return ETIMEDOUT;
-	}
-
-	/* Send the command */
-	for (i = 0; i < len; i++) {
-		mpt_write(mpt, MPT_OFFSET_DOORBELL, *data32++);
-		if (mpt_wait_db_ack(mpt) != MPT_OK) {
-			mpt_prt(mpt,
-			    "mpt_send_handshake_cmd timeout! index = %d", i);
-			return ETIMEDOUT;
-		}
-	}
-	return MPT_OK;
-}
-
-/* Get the response from the handshake register */
-int
-mpt_recv_handshake_reply(struct mpt_softc *mpt, size_t reply_len, void *reply)
-{
-	int left, reply_left;
-	u_int16_t *data16;
-	MSG_DEFAULT_REPLY *hdr;
-
-	/* We move things out in 16 bit chunks */
-	reply_len >>= 1;
-	data16 = (u_int16_t *)reply;
-
-	hdr = (MSG_DEFAULT_REPLY *)reply;
-
-	/* Get first word */
-	if (mpt_wait_db_int(mpt) != MPT_OK) {
-		mpt_prt(mpt, "mpt_recv_handshake_cmd timeout1");
-		return ETIMEDOUT;
-	}
-	*data16++ = mpt_read(mpt, MPT_OFFSET_DOORBELL) & MPT_DB_DATA_MASK;
-	mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0);
-
-	/* Get Second Word */
-	if (mpt_wait_db_int(mpt) != MPT_OK) {
-		mpt_prt(mpt, "mpt_recv_handshake_cmd timeout2");
-		return ETIMEDOUT;
-	}
-	*data16++ = mpt_read(mpt, MPT_OFFSET_DOORBELL) & MPT_DB_DATA_MASK;
-	mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0);
-
-#ifdef MPT_DEBUG
-	/* With the second word, we can now look at the length */
-	if ((reply_len >> 1) != hdr->MsgLength)
-		/* XXX don't remove brackets! */
-		DNPRINTF(50, "%s: reply length does not match message length: "
-			"got 0x%02x, expected 0x%02x\n",
-			DEVNAME(mpt), hdr->MsgLength << 2, reply_len << 1);
-#endif /* MPT_DEBUG */
-
-	/* Get rest of the reply; but don't overflow the provided buffer */
-	left = (hdr->MsgLength << 1) - 2;
-	reply_left =  reply_len - 2;
-	while (left--) {
-		u_int16_t datum;
-
-		if (mpt_wait_db_int(mpt) != MPT_OK) {
-			mpt_prt(mpt, "mpt_recv_handshake_cmd timeout3");
-			return ETIMEDOUT;
-		}
-		datum = mpt_read(mpt, MPT_OFFSET_DOORBELL);
-
-		if (reply_left-- > 0)
-			*data16++ = datum & MPT_DB_DATA_MASK;
-
-		mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0);
-	}
-
-	/* One more wait & clear at the end */
-	if (mpt_wait_db_int(mpt) != MPT_OK) {
-		mpt_prt(mpt, "mpt_recv_handshake_cmd timeout4");
-		return ETIMEDOUT;
-	}
-	mpt_write(mpt, MPT_OFFSET_INTR_STATUS, 0);
-
-	if ((hdr->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
-#ifdef MPT_DEBUG
-		if (mpt_debug > 50)
-			mpt_print_reply(hdr);
-#endif
-		return (MPT_FAIL | hdr->IOCStatus);
-	}
-
-	return (0);
-}
-
-int
-mpt_get_iocfacts(struct mpt_softc *mpt, MSG_IOC_FACTS_REPLY *freplp)
-{
-	MSG_IOC_FACTS f_req;
-	int error;
-
-	bzero(&f_req, sizeof f_req);
-	f_req.Function = MPI_FUNCTION_IOC_FACTS;
-	f_req.MsgContext =  0x12071942;
-	error = mpt_send_handshake_cmd(mpt, sizeof f_req, &f_req);
-	if (error)
-		return(error);
-	error = mpt_recv_handshake_reply(mpt, sizeof (*freplp), freplp);
-	return (error);
-}
-
-int
-mpt_get_portfacts(struct mpt_softc *mpt, MSG_PORT_FACTS_REPLY *freplp)
-{
-	MSG_PORT_FACTS f_req;
-	int error;
-
-	/* XXX: Only getting PORT FACTS for Port 0 */
-	bzero(&f_req, sizeof f_req);
-	f_req.Function = MPI_FUNCTION_PORT_FACTS;
-	f_req.MsgContext =  0x12071943;
-	error = mpt_send_handshake_cmd(mpt, sizeof f_req, &f_req);
-	if (error)
-		return(error);
-	error = mpt_recv_handshake_reply(mpt, sizeof (*freplp), freplp);
-	return (error);
-}
-
-/*
- * Send the initialization request. This is where we specify how many
- * SCSI busses and how many devices per bus we wish to emulate.
- * This is also the command that specifies the max size of the reply
- * frames from the IOC that we will be allocating.
- */
-int
-mpt_send_ioc_init(struct mpt_softc *mpt, u_int32_t who)
-{
-	int error = 0;
-	MSG_IOC_INIT init;
-	MSG_IOC_INIT_REPLY reply;
-
-	bzero(&init, sizeof init);
-	init.WhoInit = who;
-	init.Function = MPI_FUNCTION_IOC_INIT;
-	if (mpt->is_fc) {
-		init.MaxDevices = 255;
-	} else {
-		init.MaxDevices = 16;
-	}
-	init.MaxBuses = 1;
-	init.ReplyFrameSize = MPT_REPLY_SIZE;
-	init.MsgContext = 0x12071941;
-
-	/*
-	 * If we are in a recovery mode and we uploaded the FW image,
-	 * then the fw pointer is not NULL. Skip the upload a second time
-	 * Set this flag if fw set for IOC.
-	 */
-	mpt->upload_fw = 0;
-
-	if (mpt->fw_download_boot) {
-		if (mpt->fw) {
-			init.Flags = MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE;
-		}
-		else {
-			mpt->upload_fw = 1;
-		}
-	}
-
-	DNPRINTF(10, "%s: flags %d, upload_fw %d\n", DEVNAME(mpt), init.Flags,
-		mpt->upload_fw);
-
-	if ((error = mpt_send_handshake_cmd(mpt, sizeof init, &init)) != 0) {
-		return(error);
-	}
-
-	error = mpt_recv_handshake_reply(mpt, sizeof reply, &reply);
-	return (error);
-}
-
-
-/*
- * Utiltity routine to read configuration headers and pages
- */
-
-int
-mpt_read_cfg_header(struct mpt_softc *mpt, int PageType, int PageNumber,
-    int PageAddress, CONFIG_PAGE_HEADER *rslt)
-{
-	int count;
-	struct req_entry *req;
-	MSG_CONFIG *cfgp;
-	MSG_CONFIG_REPLY *reply;
-
-	req = mpt_get_request(mpt);
-
-	cfgp = req->req_vbuf;
-	bzero(cfgp, sizeof *cfgp);
-
-	cfgp->Action = MPI_CONFIG_ACTION_PAGE_HEADER;
-	cfgp->Function = MPI_FUNCTION_CONFIG;
-	cfgp->Header.PageNumber = (U8) PageNumber;
-	cfgp->Header.PageType = (U8) PageType;
-	cfgp->PageAddress = PageAddress;
-	MPI_pSGE_SET_FLAGS(((SGE_SIMPLE32 *) &cfgp->PageBufferSGE),
-	    (MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER |
-	    MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST));
-	cfgp->MsgContext = req->index | 0x80000000;
-
-	mpt_check_doorbell(mpt);
-	mpt_send_cmd(mpt, req);
-	count = 0;
-	do {
-		DELAY(500);
-		mpt_intr(mpt);
-		if (++count == 1000) {
-			mpt_prt(mpt, "read_cfg_header timed out");
-			return (-1);
-		}
-	} while (req->debug == REQ_ON_CHIP);
-
-	reply = (MSG_CONFIG_REPLY *) MPT_REPLY_PTOV(mpt, req->sequence);
-	if ((reply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
-		mpt_prt(mpt, "mpt_read_cfg_header: Config Info Status %x",
-		    reply->IOCStatus);
-		mpt_free_reply(mpt, (req->sequence << 1));
-		return (-1);
-	}
-	bcopy(&reply->Header, rslt, sizeof (CONFIG_PAGE_HEADER));
-	mpt_free_reply(mpt, (req->sequence << 1));
-	mpt_free_request(mpt, req);
-	return (0);
-}
-
-#define	CFG_DATA_OFF	128
-
-int
-mpt_read_cfg_page(struct mpt_softc *mpt, int PageAddress, CONFIG_PAGE_HEADER *hdr)
-{
-	int count;
-	struct req_entry *req;
-	SGE_SIMPLE32 *se;
-	MSG_CONFIG *cfgp;
-	size_t amt;
-	MSG_CONFIG_REPLY *reply;
-
-	req = mpt_get_request(mpt);
-
-	cfgp = req->req_vbuf;
-	bzero(cfgp, MPT_REQUEST_AREA);
-	cfgp->Action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
-	cfgp->Function = MPI_FUNCTION_CONFIG;
-	cfgp->Header = *hdr;
-	amt = (cfgp->Header.PageLength * sizeof (u_int32_t));
-	cfgp->Header.PageType &= MPI_CONFIG_PAGETYPE_MASK;
-	cfgp->PageAddress = PageAddress;
-	se = (SGE_SIMPLE32 *) &cfgp->PageBufferSGE;
-	se->Address = req->req_pbuf + CFG_DATA_OFF;
-	MPI_pSGE_SET_LENGTH(se, amt);
-	MPI_pSGE_SET_FLAGS(se, (MPI_SGE_FLAGS_SIMPLE_ELEMENT |
-	    MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER |
-	    MPI_SGE_FLAGS_END_OF_LIST));
-
-	cfgp->MsgContext = req->index | 0x80000000;
-
-	mpt_check_doorbell(mpt);
-	mpt_send_cmd(mpt, req);
-	count = 0;
-	do {
-		DELAY(500);
-		mpt_intr(mpt);
-		if (++count == 1000) {
-			mpt_prt(mpt, "read_cfg_page timed out");
-			return (-1);
-		}
-	} while (req->debug == REQ_ON_CHIP);
-
-	reply = (MSG_CONFIG_REPLY *) MPT_REPLY_PTOV(mpt, req->sequence);
-	if ((reply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
-		mpt_prt(mpt, "mpt_read_cfg_page: Config Info Status %x",
-		    reply->IOCStatus);
-		mpt_free_reply(mpt, (req->sequence << 1));
-		return (-1);
-	}
-	mpt_free_reply(mpt, (req->sequence << 1));
-#if 0 /* XXXJRT */
-	bus_dmamap_sync(mpt->request_dmat, mpt->request_dmap,
-	    BUS_DMASYNC_POSTREAD);
-#endif
-	if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_PORT &&
-	    cfgp->Header.PageNumber == 0) {
-		amt = sizeof (CONFIG_PAGE_SCSI_PORT_0);
-	} else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_PORT &&
-	    cfgp->Header.PageNumber == 1) {
-		amt = sizeof (CONFIG_PAGE_SCSI_PORT_1);
-	} else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_PORT &&
-	    cfgp->Header.PageNumber == 2) {
-		amt = sizeof (CONFIG_PAGE_SCSI_PORT_2);
-	} else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_DEVICE  &&
-	    cfgp->Header.PageNumber == 0) {
-		amt = sizeof (CONFIG_PAGE_SCSI_DEVICE_0);
-	} else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_DEVICE  &&
-	    cfgp->Header.PageNumber == 1) {
-		amt = sizeof (CONFIG_PAGE_SCSI_DEVICE_1);
-	} else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_MANUFACTURING &&
-	    cfgp->Header.PageNumber == 0) {
-		amt = sizeof (CONFIG_PAGE_MANUFACTURING_0);
-	} else if (cfgp->Header.PageType ==  MPI_CONFIG_PAGETYPE_IOC &&
-	    cfgp->Header.PageNumber == 2) {
-		amt = sizeof (CONFIG_PAGE_IOC_2);
-	} else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_RAID_VOLUME &&
-	    cfgp->Header.PageNumber == 0) {
-		amt = sizeof (CONFIG_PAGE_RAID_VOL_0);
-	} else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_RAID_PHYSDISK &&
-	    cfgp->Header.PageNumber == 0) {
-		amt = sizeof (CONFIG_PAGE_RAID_PHYS_DISK_0);
-	}
-
-	bcopy(((caddr_t)req->req_vbuf)+CFG_DATA_OFF, hdr, amt);
-	mpt_free_request(mpt, req);
-	return (0);
-}
-
-int
-mpt_write_cfg_page(struct mpt_softc *mpt, int PageAddress, CONFIG_PAGE_HEADER *hdr)
-{
-	int count, hdr_attr;
-	struct req_entry *req;
-	SGE_SIMPLE32 *se;
-	MSG_CONFIG *cfgp;
-	size_t amt;
-	MSG_CONFIG_REPLY *reply;
-
-	req = mpt_get_request(mpt);
-
-	cfgp = req->req_vbuf;
-	bzero(cfgp, sizeof *cfgp);
-
-	hdr_attr = hdr->PageType & MPI_CONFIG_PAGEATTR_MASK;
-	if (hdr_attr != MPI_CONFIG_PAGEATTR_CHANGEABLE &&
-	    hdr_attr != MPI_CONFIG_PAGEATTR_PERSISTENT) {
-		mpt_prt(mpt, "page type 0x%x not changeable",
-		    hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
-		return (-1);
-	}
-	hdr->PageType &= MPI_CONFIG_PAGETYPE_MASK;
-
-	cfgp->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
-	cfgp->Function = MPI_FUNCTION_CONFIG;
-	cfgp->Header = *hdr;
-	amt = (cfgp->Header.PageLength * sizeof (u_int32_t));
-	cfgp->PageAddress = PageAddress;
-
-	se = (SGE_SIMPLE32 *) &cfgp->PageBufferSGE;
-	se->Address = req->req_pbuf + CFG_DATA_OFF;
-	MPI_pSGE_SET_LENGTH(se, amt);
-	MPI_pSGE_SET_FLAGS(se, (MPI_SGE_FLAGS_SIMPLE_ELEMENT |
-	    MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER |
-	    MPI_SGE_FLAGS_END_OF_LIST | MPI_SGE_FLAGS_HOST_TO_IOC));
-
-	cfgp->MsgContext = req->index | 0x80000000;
-
-	if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_PORT &&
-	    cfgp->Header.PageNumber == 0) {
-		amt = sizeof (CONFIG_PAGE_SCSI_PORT_0);
-	} else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_PORT &&
-	    cfgp->Header.PageNumber == 1) {
-		amt = sizeof (CONFIG_PAGE_SCSI_PORT_1);
-	} else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_PORT &&
-	    cfgp->Header.PageNumber == 2) {
-		amt = sizeof (CONFIG_PAGE_SCSI_PORT_2);
-	} else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_DEVICE  &&
-	    cfgp->Header.PageNumber == 0) {
-		amt = sizeof (CONFIG_PAGE_SCSI_DEVICE_0);
-	} else if (cfgp->Header.PageType == MPI_CONFIG_PAGETYPE_SCSI_DEVICE  &&
-	    cfgp->Header.PageNumber == 1) {
-		amt = sizeof (CONFIG_PAGE_SCSI_DEVICE_1);
-	}
-	bcopy(hdr, ((caddr_t)req->req_vbuf)+CFG_DATA_OFF, amt);
-	/* Restore stripped out attributes */
-	hdr->PageType |= hdr_attr;
-
-	mpt_check_doorbell(mpt);
-	mpt_send_cmd(mpt, req);
-	count = 0;
-	do {
-		DELAY(500);
-		mpt_intr(mpt);
-		if (++count == 1000) {
-			hdr->PageType |= hdr_attr;
-			mpt_prt(mpt, "mpt_write_cfg_page timed out");
-			return (-1);
-		}
-	} while (req->debug == REQ_ON_CHIP);
-
-	reply = (MSG_CONFIG_REPLY *) MPT_REPLY_PTOV(mpt, req->sequence);
-	if ((reply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
-		mpt_prt(mpt, "mpt_write_cfg_page: Config Info Status %x",
-		    reply->IOCStatus);
-		mpt_free_reply(mpt, (req->sequence << 1));
-		return (-1);
-	}
-	mpt_free_reply(mpt, (req->sequence << 1));
-
-	mpt_free_request(mpt, req);
-	return (0);
-}
-
-#ifdef MPT_DEBUG
-void
-mpt_print_header(struct mpt_softc *mpt, char *s, CONFIG_PAGE_HEADER *phdr)
-{
-	DNPRINTF(10,"%s: %s %x: %x %x %x %x\n",
-	    DEVNAME(mpt),
-	    s,
-	    phdr->PageNumber,
-	    phdr->PageType,
-	    phdr->PageNumber,
-	    phdr->PageLength,
-	    phdr->PageVersion);
-}
-#endif /* MPT_DEBUG */
-
-/*
- * Read manufacturing configuration information
- */
-int
-mpt_read_config_info_mfg(struct mpt_softc *mpt)
-{
-	int rv, i;
-	CONFIG_PAGE_HEADER *phdr[5] = {
-		phdr[0] = &mpt->mpt_mfg_page0.Header,
-		phdr[1] = &mpt->mpt_mfg_page1.Header,
-		phdr[2] = &mpt->mpt_mfg_page2.Header,
-		phdr[3] = &mpt->mpt_mfg_page3.Header,
-		phdr[4] = &mpt->mpt_mfg_page4.Header
-	};
-
-	for (i = 0; i < 5 /* 5 pages total */; i++) {
-		/* retrieve MFG headers */
-		rv = mpt_read_cfg_header(mpt,
-		    MPI_CONFIG_PAGETYPE_MANUFACTURING, i, 0, phdr[i]);
-		if (rv) {
-			mpt_prt(mpt, "Could not retrieve Manufacturing Page "
-			    "%i Header.", i);
-			return (-1);
-		}
-#ifdef MPT_DEBUG
-		mpt_print_header(mpt, "Manufacturing Header Page", phdr[i]);
-#endif /* MPT_DEBUG */
-
-		/* retrieve MFG config pages using retrieved headers */
-		rv = mpt_read_cfg_page(mpt, i, phdr[i]);
-		if (rv) {
-			mpt_prt(mpt, "Could not retrieve manufacturing Page"
-			    " %i", i);
-			return (-1);
-		}
-	}
-
-#ifdef MPT_DEBUG
-	if (mpt_debug > 10) {
-		mpt_prt(mpt, "Manufacturing Page 0 data: %s %s %s %s %s",
-		    mpt->mpt_mfg_page0.ChipName,
-		    mpt->mpt_mfg_page0.ChipRevision,
-		    mpt->mpt_mfg_page0.BoardName,
-		    mpt->mpt_mfg_page0.BoardAssembly,
-		    mpt->mpt_mfg_page0.BoardTracerNumber);
-
-		mpt_prt(mpt, "Manufacturing Page 1 data:");
-		for (i = 0;
-		    i < ((mpt->mpt_mfg_page1.Header.PageLength - 1)<< 2); i++) {
-			printf("%02x ", mpt->mpt_mfg_page1.VPD[i]);
-		}
-		printf("\n");
-
-		mpt_prt(mpt, "Manufacturing Page 2 data: %x %x",
-		    mpt->mpt_mfg_page2.ChipId.PCIRevisionID,
-		    mpt->mpt_mfg_page2.ChipId.DeviceID);
-		for (i = 0;
-		    i < (mpt->mpt_mfg_page2.Header.PageLength - 2); i++) {
-			printf("%08x ", mpt->mpt_mfg_page2.HwSettings[i]);
-		}
-		printf("\n");
-
-		mpt_prt(mpt, "Manufacturing Page 3 data: %x %x",
-		    mpt->mpt_mfg_page3.ChipId.PCIRevisionID,
-		    mpt->mpt_mfg_page3.ChipId.DeviceID);
-		for (i = 0;
-		    i < (mpt->mpt_mfg_page3.Header.PageLength - 2); i++) {
-			printf("%08x ", mpt->mpt_mfg_page3.Info[i]);
-		}
-		printf("\n");
-
-		mpt_prt(mpt, "Manufacturing Page 4 data: %x %x %x %x %x",
-		    mpt->mpt_mfg_page4.InfoSize1,
-		    mpt->mpt_mfg_page4.InfoOffset1,
-		    mpt->mpt_mfg_page4.InfoSize0,
-		    mpt->mpt_mfg_page4.InfoOffset0,
-		    mpt->mpt_mfg_page4.InquirySize,
-		    mpt->mpt_mfg_page4.ISVolumeSettings,
-		    mpt->mpt_mfg_page4.IMEVolumeSettings,
-		    mpt->mpt_mfg_page4.IMVolumeSettings);
-		for (i = 0; i < sizeof(mpt->mpt_mfg_page4.InquiryData); i++) {
-			printf("%02x ", mpt->mpt_mfg_page4.InquiryData[i]);
-		}
-		printf("\n");
-	}
-#endif /* MPT_DEBUG */
-
-	return (0);
-}
-
-/*
- * Read IO Unit configuration information
- */
-int
-mpt_read_config_info_iou(struct mpt_softc *mpt)
-{
-	int rv, i;
-
-	CONFIG_PAGE_HEADER *phdr[4] = {
-		phdr[0] = &mpt->mpt_iou_page0.Header,
-		phdr[1] = &mpt->mpt_iou_page1.Header,
-		phdr[2] = &mpt->mpt_iou_page2.Header,
-		phdr[3] = &mpt->mpt_iou_page2.Header,
-	};
-
-	for (i = 0; i < 4 /* 4 pages total */; i++) {
-		/* retrieve IO Unit headers */
-		rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_IO_UNIT, i,
-		    0, phdr[i]);
-		if (rv) {
-			mpt_prt(mpt, "Could not retrieve IO Unit Page %i "
-			    "header.", i);
-			return (-1);
-		}
-#ifdef MPT_DEBUG
-		mpt_print_header(mpt, "IO Unit Header Page", phdr[i]);
-#endif /* MPT_DEBUG */
-
-		/* retrieve IO Unit config pages using retrieved headers */
-		rv = mpt_read_cfg_page(mpt, i, phdr[i]);
-		if (rv) {
-			mpt_prt(mpt, "Could not retrieve IO Unit Page %i", i);
-			return (-1);
-		}
-
-		if (i == 0 &&
-		    mpt->mpt_iou_page0.UniqueValue.High == 0xdeadbeef &&
-		    mpt->mpt_iou_page0.UniqueValue.Low == 0xdeadbeef)
-		{
-			/* vmware returns a lot of dead beef in page 0 */
-			mpt->vmware = 1;
-		}
-	}
-
-	DNPRINTF(10, "%s: IO Unit Page 0 data: %llx\n",
-	    DEVNAME(mpt),
-	    mpt->mpt_iou_page0.UniqueValue);
-	DNPRINTF(10, "%s: IO Unit Page 1 data: %x\n",
-	    DEVNAME(mpt),
-	    mpt->mpt_iou_page1.Flags);
-	DNPRINTF(10, "%s: IO Unit Page 2 data: %x %x %x %x %x %x\n",
-	    DEVNAME(mpt),
-	    mpt->mpt_iou_page2.Flags,
-	    mpt->mpt_iou_page2.BiosVersion,
-	    mpt->mpt_iou_page2.AdapterOrder[0],
-	    mpt->mpt_iou_page2.AdapterOrder[1],
-	    mpt->mpt_iou_page2.AdapterOrder[2],
-	    mpt->mpt_iou_page2.AdapterOrder[3]);
-
-	return (0);
-}
-
-/*
- * Read IOC configuration information
- */
-int
-mpt_read_config_info_ioc(struct mpt_softc *mpt)
-{
-	int rv, i;
-	CONFIG_PAGE_HEADER *phdr[5] = {
-		phdr[0] = &mpt->mpt_ioc_page0.Header,
-		phdr[1] = &mpt->mpt_ioc_page1.Header,
-		phdr[2] = &mpt->mpt_ioc_page2.Header,
-		phdr[3] = &mpt->mpt_ioc_page3.Header,
-		phdr[4] = &mpt->mpt_ioc_page4.Header
-	};
-
-	for (i = 0; i < 5 /* 5 pages total */; i++) {
-		/* retrieve IOC headers */
-		rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_IOC, i,
-		    0, phdr[i]);
-		if (rv) {
-			mpt_prt(mpt, "Could not retrieve IOC Page %i header.",
-			   i);
-			return (-1);
-		}
-#ifdef MPT_DEBUG
-		mpt_print_header(mpt, "IOC Header Page", phdr[i]);
-#endif /* MPT_DEBUG */
-
-		/* retrieve IOC config pages using retrieved headers */
-		rv = mpt_read_cfg_page(mpt, i, phdr[i]);
-		if (rv) {
-			mpt_prt(mpt, "Could not retrieve IOC Page %i", i);
-			return (-1);
-		}
-	}
-
-#ifdef MPT_DEBUG
-	if (mpt_debug > 10) {
-		mpt_prt(mpt, "IOC Page 0 data: %x %x %x %x %x %x %x %x",
-		    mpt->mpt_ioc_page0.TotalNVStore,
-		    mpt->mpt_ioc_page0.FreeNVStore,
-		    mpt->mpt_ioc_page0.DeviceID,
-		    mpt->mpt_ioc_page0.VendorID,
-		    mpt->mpt_ioc_page0.RevisionID,
-		    mpt->mpt_ioc_page0.ClassCode,
-		    mpt->mpt_ioc_page0.SubsystemID,
-		    mpt->mpt_ioc_page0.SubsystemVendorID
-		);
-
-		mpt_prt(mpt, "IOC Page 1 data: %x %x %x",
-		    mpt->mpt_ioc_page1.Flags,
-		    mpt->mpt_ioc_page1.CoalescingTimeout,
-		    mpt->mpt_ioc_page1.CoalescingDepth);
-
-		mpt_prt(mpt, "IOC Page 2 data: %x %x %x %x %x",
-		    mpt->mpt_ioc_page2.CapabilitiesFlags,
-		    mpt->mpt_ioc_page2.MaxPhysDisks,
-		    mpt->mpt_ioc_page2.NumActivePhysDisks,
-		    mpt->mpt_ioc_page2.MaxVolumes,
-		    mpt->mpt_ioc_page2.NumActiveVolumes);
-
-		/* FIXME: move this to attach */
-		if (mpt->mpt_ioc_page2.MaxVolumes >
-		    MPI_IOC_PAGE_2_RAID_VOLUME_MAX) {
-		    /* complain */
-		}
-		for (i = 0; i < mpt->mpt_ioc_page2.MaxVolumes; i++) {
-			mpt_prt(mpt, "IOC Page 2 RAID Volume %x %x %x %x %x",
-			mpt->mpt_ioc_page2.RaidVolume[i].VolumeType,
-			mpt->mpt_ioc_page2.RaidVolume[i].VolumePageNumber,
-			mpt->mpt_ioc_page2.RaidVolume[i].VolumeIOC,
-			mpt->mpt_ioc_page2.RaidVolume[i].VolumeBus,
-			mpt->mpt_ioc_page2.RaidVolume[i].VolumeID);
-		}
-
-		mpt_prt(mpt, "IOC Page 3 data: %x ",
-			mpt->mpt_ioc_page3.NumPhysDisks);
-
-		for (i = 0; i < mpt->mpt_ioc_page3.NumPhysDisks; i++) {
-			mpt_prt(mpt, "IOC Page 3 Physical Disk: %x %x %x %x",
-			    mpt->mpt_ioc_page3.PhysDisk[i].PhysDiskNum,
-			    mpt->mpt_ioc_page3.PhysDisk[i].PhysDiskIOC,
-			    mpt->mpt_ioc_page3.PhysDisk[i].PhysDiskBus,
-			    mpt->mpt_ioc_page3.PhysDisk[i].PhysDiskID);
-		}
-
-		mpt_prt(mpt, "IOC Page 4 data: %x %x",
-			mpt->mpt_ioc_page4.MaxSEP,
-			mpt->mpt_ioc_page4.ActiveSEP);
-
-		for (i = 0; i < mpt->mpt_ioc_page4.MaxSEP; i++) {
-			mpt_prt(mpt, "IOC Page 4 SEP: %x %x",
-			    mpt->mpt_ioc_page4.SEP[i].SEPTargetID,
-			    mpt->mpt_ioc_page4.SEP[i].SEPBus);
-		}
-	}
-#endif /* MPT_DEBUG */
-
-	return (0);
-}
-
-/*
- * Read RAID Volume pages
- */
-int
-mpt_read_config_info_raid(struct mpt_softc *mpt)
-{
-	int rv;
-
-	/* retrieve raid volume headers */
-	rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_RAID_VOLUME, 0,
-	    0, &mpt->mpt_raidvol_page0.Header);
-	if (rv) {
-		mpt_prt(mpt, "Could not retrieve RAID Volume Page 0 Header");
-		return (-1);
-	}
-#ifdef MPT_DEBUG
-	mpt_print_header(mpt, "RAID Volume Header Page",
-	    &mpt->mpt_raidvol_page0.Header);
-#endif /* MPT_DEBUG */
-
-	/* retrieve raid volume page using retrieved headers */
-	rv = mpt_read_cfg_page(mpt, 0, &mpt->mpt_raidvol_page0.Header);
-	if (rv) {
-		mpt_prt(mpt, "Could not retrieve RAID Volume Page 0");
-		return (-1);
-	}
-
-	/* retrieve raid physical disk header */
-	rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_RAID_PHYSDISK, 0,
-	    0, &mpt->mpt_raidphys_page0.Header);
-	if (rv) {
-		mpt_prt(mpt, "Could not retrieve RAID Phys Disk Page 0 Header");
-		return (-1);
-	}
-#ifdef MPT_DEBUG
-	mpt_print_header(mpt, "RAID Volume Physical Disk Page",
-	    &mpt->mpt_raidphys_page0.Header);
-#endif /* MPT_DEBUG */
-
-	/* retrieve raid physical disk page using retrieved headers */
-	rv = mpt_read_cfg_page(mpt, 0, &mpt->mpt_raidphys_page0.Header);
-	if (rv) {
-		mpt_prt(mpt, "Could not retrieve RAID Phys Disk Page 0");
-		return (-1);
-	}
-
-#ifdef MPT_DEBUG
-	int i;
-	if (mpt_debug > 10) {
-		mpt_prt(mpt, "RAID Volume Page 0 data: %x %x %x %x %x"
-		    "%x %x %x %x",
-		    mpt->mpt_raidvol_page0.VolumeType,
-		    mpt->mpt_raidvol_page0.VolumeIOC,
-		    mpt->mpt_raidvol_page0.VolumeBus,
-		    mpt->mpt_raidvol_page0.VolumeID,
-		    mpt->mpt_raidvol_page0.VolumeStatus,
-		    mpt->mpt_raidvol_page0.VolumeSettings,
-		    mpt->mpt_raidvol_page0.MaxLBA,
-		    mpt->mpt_raidvol_page0.StripeSize,
-		    mpt->mpt_raidvol_page0.NumPhysDisks);
-
-		for (i = 0; i < mpt->mpt_raidvol_page0.NumPhysDisks; i++) {
-			mpt_prt(mpt, "RAID Volume Page 0 Physical Disk: %x %x",
-			    mpt->mpt_raidvol_page0.PhysDisk[i].PhysDiskNum,
-			    mpt->mpt_raidvol_page0.PhysDisk[i].PhysDiskMap);
-		}
-		printf("\n");
-
-		mpt_prt(mpt, "RAID Phyical Disk Page 0 data: %x %x %x %x %x"
-		    "%x %x %x",
-		    mpt->mpt_raidphys_page0.PhysDiskNum,
-		    mpt->mpt_raidphys_page0.PhysDiskIOC,
-		    mpt->mpt_raidphys_page0.PhysDiskBus,
-		    mpt->mpt_raidphys_page0.PhysDiskID,
-		    mpt->mpt_raidphys_page0.PhysDiskSettings.SepID,
-		    mpt->mpt_raidphys_page0.PhysDiskSettings.SepBus,
-		    mpt->mpt_raidphys_page0.PhysDiskSettings.HotSparePool,
-		    mpt->mpt_raidphys_page0.PhysDiskSettings.PhysDiskSettings);
-
-		for (i = 0;
-		    i < sizeof(mpt->mpt_raidphys_page0.DiskIdentifier); i++) {
-			printf("%02x ",
-			    mpt->mpt_raidphys_page0.DiskIdentifier[i]);
-		}
-
-		/* does them all */
-		printf("\n");
-		mpt_prt(mpt, "RAID Phyical Disk Page 0 data: %s",
-		    mpt->mpt_raidphys_page0.InquiryData.VendorID);
-
-		for (i = 0;
-		    i < sizeof(mpt->mpt_raidphys_page0.InquiryData.Info); i++) {
-			printf("%02x ",
-			    mpt->mpt_raidphys_page0.InquiryData.Info[i]);
-		}
-
-		printf("\n");
-		mpt_prt(mpt, "RAID Phyical Disk Page 0 data: %x %x %x"
-		    "%x %x %x %x %x %x %x %x",
-		    mpt->mpt_raidphys_page0.PhysDiskStatus.Flags,
-		    mpt->mpt_raidphys_page0.PhysDiskStatus.State,
-		    mpt->mpt_raidphys_page0.MaxLBA,
-		    mpt->mpt_raidphys_page0.ErrorData.ErrorSenseKey,
-		    mpt->mpt_raidphys_page0.ErrorData.ErrorCdbByte,
-		    mpt->mpt_raidphys_page0.ErrorData.ErrorASCQ,
-		    mpt->mpt_raidphys_page0.ErrorData.ErrorASC,
-		    mpt->mpt_raidphys_page0.ErrorData.ErrorCount,
-		    mpt->mpt_raidphys_page0.ErrorData.SmartASCQ,
-		    mpt->mpt_raidphys_page0.ErrorData.SmartASC,
-		    mpt->mpt_raidphys_page0.ErrorData.SmartCount
-		    );
-	}
-#endif /* MPT_DEBUG */
-
-	return (0);
-}
-
-/*
- * Read SCSI configuration information
- */
-int
-mpt_read_config_info_spi(struct mpt_softc *mpt)
-{
-	int rv, i;
-
-	rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 0,
-	    0, &mpt->mpt_port_page0.Header);
-	if (rv)
-		return (-1);
-
-	DNPRINTF(10, "%s: SPI Port Page 0 Header: %x %x %x %x\n",
-	    DEVNAME(mpt),
-	    mpt->mpt_port_page0.Header.PageVersion,
-	    mpt->mpt_port_page0.Header.PageLength,
-	    mpt->mpt_port_page0.Header.PageNumber,
-	    mpt->mpt_port_page0.Header.PageType);
-
-	rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 1,
-	    0, &mpt->mpt_port_page1.Header);
-	if (rv)
-		return (-1);
-
-	DNPRINTF(10, "%s: SPI Port Page 1 Header: %x %x %x %x\n",
-	    DEVNAME(mpt),
-	    mpt->mpt_port_page1.Header.PageVersion,
-	    mpt->mpt_port_page1.Header.PageLength,
-	    mpt->mpt_port_page1.Header.PageNumber,
-	    mpt->mpt_port_page1.Header.PageType);
-
-	rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_PORT, 2,
-	    0, &mpt->mpt_port_page2.Header);
-	if (rv)
-		return (-1);
-
-	DNPRINTF(10, "%s: SPI Port Page 2 Header: %x %x %x %x\n",
-	    DEVNAME(mpt),
-	    mpt->mpt_port_page1.Header.PageVersion,
-	    mpt->mpt_port_page1.Header.PageLength,
-	    mpt->mpt_port_page1.Header.PageNumber,
-	    mpt->mpt_port_page1.Header.PageType);
-
-	for (i = 0; i < 16; i++) {
-		rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_DEVICE,
-		    0, i, &mpt->mpt_dev_page0[i].Header);
-		if (rv) {
-			return (-1);
-		}
-		DNPRINTF(10,
-		    "%s: SPI Target %d Device Page 0 Header: %x %x %x %x\n",
-		    DEVNAME(mpt),
-		    i, mpt->mpt_dev_page0[i].Header.PageVersion,
-		    mpt->mpt_dev_page0[i].Header.PageLength,
-		    mpt->mpt_dev_page0[i].Header.PageNumber,
-		    mpt->mpt_dev_page0[i].Header.PageType);
-
-		rv = mpt_read_cfg_header(mpt, MPI_CONFIG_PAGETYPE_SCSI_DEVICE,
-		    1, i, &mpt->mpt_dev_page1[i].Header);
-		if (rv) {
-			return (-1);
-		}
-		DNPRINTF(10,
-		    "%s: SPI Target %d Device Page 1 Header: %x %x %x %x\n",
-		    DEVNAME(mpt),
-		    i, mpt->mpt_dev_page1[i].Header.PageVersion,
-		    mpt->mpt_dev_page1[i].Header.PageLength,
-		    mpt->mpt_dev_page1[i].Header.PageNumber,
-		    mpt->mpt_dev_page1[i].Header.PageType);
-	}
-
-	/*
-	 * At this point, we don't *have* to fail. As long as we have
-	 * valid config header information, we can (barely) lurch
-	 * along.
-	 */
-
-	rv = mpt_read_cfg_page(mpt, 0, &mpt->mpt_port_page0.Header);
-	if (rv) {
-		mpt_prt(mpt, "failed to read SPI Port Page 0");
-	} else
-		DNPRINTF(10,
-		    "%s: SPI Port Page 0: Capabilities %x PhysicalInterface %x\n",
-		    DEVNAME(mpt),
-		    mpt->mpt_port_page0.Capabilities,
-		    mpt->mpt_port_page0.PhysicalInterface);
-
-	rv = mpt_read_cfg_page(mpt, 0, &mpt->mpt_port_page1.Header);
-	if (rv) {
-		mpt_prt(mpt, "failed to read SPI Port Page 1");
-	} else
-		DNPRINTF(10,
-		    "%s: SPI Port Page 1: Configuration %x OnBusTimerValue %x\n",
-		    DEVNAME(mpt),
-		    mpt->mpt_port_page1.Configuration,
-		    mpt->mpt_port_page1.OnBusTimerValue);
-
-	rv = mpt_read_cfg_page(mpt, 0, &mpt->mpt_port_page2.Header);
-	if (rv) {
-		mpt_prt(mpt, "failed to read SPI Port Page 2");
-	} else {
-		DNPRINTF(10,
-		    "%s: SPI Port Page 2: Flags %x Settings %x\n",
-		    DEVNAME(mpt),
-		    mpt->mpt_port_page2.PortFlags,
-		    mpt->mpt_port_page2.PortSettings);
-		for (i = 0; i < 16; i++)
-			DNPRINTF(10,
-			    "%s: SPI Port Page 2 Tgt %d: timo %x SF %x Flags %x\n",
-			    DEVNAME(mpt),
-			    i, mpt->mpt_port_page2.DeviceSettings[i].Timeout,
-			    mpt->mpt_port_page2.DeviceSettings[i].SyncFactor,
-			    mpt->mpt_port_page2.DeviceSettings[i].DeviceFlags);
-	}
-
-	for (i = 0; i < 16; i++) {
-		rv = mpt_read_cfg_page(mpt, i, &mpt->mpt_dev_page0[i].Header);
-		if (rv) {
-			mpt_prt(mpt, "cannot read SPI Tgt %d Device Page 0", i);
-			continue;
-		}
-		DNPRINTF(10,
-		    "%s: SPI Tgt %d Page 0: NParms %x Information %x\n",
-		    DEVNAME(mpt),
-		    i, mpt->mpt_dev_page0[i].NegotiatedParameters,
-		    mpt->mpt_dev_page0[i].Information);
-
-		rv = mpt_read_cfg_page(mpt, i, &mpt->mpt_dev_page1[i].Header);
-		if (rv) {
-			mpt_prt(mpt, "cannot read SPI Tgt %d Device Page 1", i);
-			continue;
-		}
-
-		DNPRINTF(10,
-		    "%s: SPI Tgt %d Page 1: RParms %x Configuration %x\n",
-		    DEVNAME(mpt),
-		    i, mpt->mpt_dev_page1[i].RequestedParameters,
-		    mpt->mpt_dev_page1[i].Configuration);
-	}
-	return (0);
-}
-
-/*
- * Validate SPI configuration information.
- *
- * In particular, validate SPI Port Page 1.
- */
-int
-mpt_set_initial_config_spi(struct mpt_softc *mpt)
-{
-	int i, pp1val = ((1 << mpt->mpt_ini_id) << 16) | mpt->mpt_ini_id;
-
-	mpt->mpt_disc_enable = 0xff;
-	mpt->mpt_tag_enable = 0;
-
-	if (mpt->mpt_port_page1.Configuration != pp1val) {
-		CONFIG_PAGE_SCSI_PORT_1 tmp;
-		mpt_prt(mpt,
-		    "SPI Port Page 1 Config value bad (%x)- should be %x",
-		    mpt->mpt_port_page1.Configuration, pp1val);
-		tmp = mpt->mpt_port_page1;
-		tmp.Configuration = pp1val;
-		if (mpt_write_cfg_page(mpt, 0, &tmp.Header)) {
-			return (-1);
-		}
-		if (mpt_read_cfg_page(mpt, 0, &tmp.Header)) {
-			return (-1);
-		}
-		if (tmp.Configuration != pp1val) {
-			mpt_prt(mpt,
-			    "failed to reset SPI Port Page 1 Config value");
-			return (-1);
-		}
-		mpt->mpt_port_page1 = tmp;
-	}
-
-	for (i = 0; i < 16; i++) {
-		CONFIG_PAGE_SCSI_DEVICE_1 tmp;
-		tmp = mpt->mpt_dev_page1[i];
-		tmp.RequestedParameters = 0;
-		tmp.Configuration = 0;
-		DNPRINTF(10,
-		    "%s: Set Tgt %d SPI DevicePage 1 values to %x 0 %x\n",
-		    DEVNAME(mpt),
-		    i, tmp.RequestedParameters, tmp.Configuration);
-
-		if (mpt_write_cfg_page(mpt, i, &tmp.Header))
-			return (-1);
-
-		if (mpt_read_cfg_page(mpt, i, &tmp.Header))
-			return (-1);
-
-		mpt->mpt_dev_page1[i] = tmp;
-		DNPRINTF(10,
-		    "%s: SPI Tgt %d Page 1: RParm %x Configuration %x\n",
-		    DEVNAME(mpt),
-		    i,
-		    mpt->mpt_dev_page1[i].RequestedParameters,
-		    mpt->mpt_dev_page1[i].Configuration);
-	}
-	return (0);
-}
-
-/*
- * Enable IOC port
- */
-int
-mpt_send_port_enable(struct mpt_softc *mpt, int port)
-{
-	int count;
-	struct req_entry *req;
-	MSG_PORT_ENABLE *enable_req;
-
-	req = mpt_get_request(mpt);
-
-	enable_req = req->req_vbuf;
-	bzero(enable_req, sizeof *enable_req);
-
-	enable_req->Function   = MPI_FUNCTION_PORT_ENABLE;
-	enable_req->MsgContext = req->index | 0x80000000;
-	enable_req->PortNumber = port;
-
-	mpt_check_doorbell(mpt);
-	DNPRINTF(10, "%s: enabling port %d\n", DEVNAME(mpt), port);
-
-	mpt_send_cmd(mpt, req);
-
-	count = 0;
-	do {
-		DELAY(500);
-		mpt_intr(mpt);
-		if (++count == 100000) {
-			mpt_prt(mpt, "port enable timed out");
-			return (-1);
-		}
-	} while (req->debug == REQ_ON_CHIP);
-	mpt_free_request(mpt, req);
-	return (0);
-}
-
-/*
- * Enable/Disable asynchronous event reporting.
- *
- * NB: this is the first command we send via shared memory
- * instead of the handshake register.
- */
-int
-mpt_send_event_request(struct mpt_softc *mpt, int onoff)
-{
-	struct req_entry *req;
-	MSG_EVENT_NOTIFY *enable_req;
-
-	req = mpt_get_request(mpt);
-
-	enable_req = req->req_vbuf;
-	bzero(enable_req, sizeof *enable_req);
-
-	enable_req->Function   = MPI_FUNCTION_EVENT_NOTIFICATION;
-	enable_req->MsgContext = req->index | 0x80000000;
-	enable_req->Switch     = onoff;
-
-	mpt_check_doorbell(mpt);
-	DNPRINTF(10, "%s: %sabling async events\n",
-	    DEVNAME(mpt), onoff? "en" : "dis");
-	mpt_send_cmd(mpt, req);
-
-	return (0);
-}
-
-/*
- * Un-mask the interrupts on the chip.
- */
-void
-mpt_enable_ints(struct mpt_softc *mpt)
-{
-	/* Unmask every thing except door bell int */
-	mpt_write(mpt, MPT_OFFSET_INTR_MASK, MPT_INTR_DB_MASK);
-}
-
-/*
- * Mask the interrupts on the chip.
- */
-void
-mpt_disable_ints(struct mpt_softc *mpt)
-{
-	/* Mask all interrupts */
-	mpt_write(mpt, MPT_OFFSET_INTR_MASK,
-	    MPT_INTR_REPLY_MASK | MPT_INTR_DB_MASK);
-}
-
-/* (Re)Initialize the chip for use */
-int
-mpt_init(struct mpt_softc *mpt, u_int32_t who)
-{
-	int try;
-	MSG_IOC_FACTS_REPLY facts;
-	MSG_PORT_FACTS_REPLY pfp;
-	u_int32_t pptr;
-	int val;
-
-	/* Put all request buffers (back) on the free list */
-	SLIST_INIT(&mpt->request_free_list);
-	for (val = 0; val < MPT_MAX_REQUESTS(mpt); val++) {
-		mpt_init_request(mpt, &mpt->request_pool[val]);
-	}
-
-	DNPRINTF(10, "%s: doorbell req = %s\n",
-	    DEVNAME(mpt),
-	    mpt_ioc_diag(mpt_read(mpt, MPT_OFFSET_DOORBELL)));
-
-	/*
-	 * Start by making sure we're not at FAULT or RESET state
-	 */
-	switch (mpt_rd_db(mpt) & MPT_DB_STATE_MASK) {
-	case MPT_DB_STATE_RESET:
-	case MPT_DB_STATE_FAULT:
-		if (mpt_reset(mpt) != MPT_OK) {
-			return (EIO);
-		}
-	default:
-		break;
-	}
-
-	for (try = 0; try < MPT_MAX_TRIES; try++) {
-		/*
-		 * No need to reset if the IOC is already in the READY state.
-		 *
-		 * Force reset if initialization failed previously.
-		 * Note that a hard_reset of the second channel of a '929
-		 * will stop operation of the first channel.  Hopefully, if the
-		 * first channel is ok, the second will not require a hard
-		 * reset.
-		 */
-		if ((mpt_rd_db(mpt) & MPT_DB_STATE_MASK) !=
-		    MPT_DB_STATE_READY) {
-			if (mpt_reset(mpt) != MPT_OK) {
-				DELAY(10000);
-				continue;
-			}
-		}
-
-		if (mpt_get_iocfacts(mpt, &facts) != MPT_OK) {
-			mpt_prt(mpt, "mpt_get_iocfacts failed");
-			continue;
-		}
-
-		DNPRINTF(10,
-		    "%s: IOCFACTS: GlobalCredits=%d BlockSize=%u "
-		    "Request Frame Size %u\n",
-		    DEVNAME(mpt), facts.GlobalCredits,
-		    facts.BlockSize, facts.RequestFrameSize);
-
-		mpt->mpt_global_credits = facts.GlobalCredits;
-		mpt->request_frame_size = facts.RequestFrameSize;
-
-		/* save the firmware upload required flag */
-		mpt->fw_download_boot = facts.Flags
-			& MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT;
-
-		mpt->fw_image_size = facts.FWImageSize;
-
-		if (mpt_get_portfacts(mpt, &pfp) != MPT_OK) {
-			mpt_prt(mpt, "mpt_get_portfacts failed");
-			continue;
-		}
-
-		DNPRINTF(10,
-		    "%s: PORTFACTS: Type %x PFlags %x IID %d MaxDev %d\n",
-		    DEVNAME(mpt),
-		    pfp.PortType, pfp.ProtocolFlags, pfp.PortSCSIID,
-		    pfp.MaxDevices);
-
-		if (pfp.PortType != MPI_PORTFACTS_PORTTYPE_SCSI &&
-		    pfp.PortType != MPI_PORTFACTS_PORTTYPE_FC) {
-			mpt_prt(mpt, "Unsupported Port Type (%x)",
-			    pfp.PortType);
-			return (ENXIO);
-		}
-		if (!(pfp.ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR)) {
-			mpt_prt(mpt, "initiator role unsupported");
-			return (ENXIO);
-		}
-		if (pfp.PortType == MPI_PORTFACTS_PORTTYPE_FC) {
-			mpt->is_fc = 1;
-		} else {
-			mpt->is_fc = 0;
-		}
-		mpt->mpt_ini_id = pfp.PortSCSIID;
-
-		if (mpt_send_ioc_init(mpt, who) != MPT_OK) {
-			mpt_prt(mpt, "mpt_send_ioc_init failed");
-			continue;
-		}
-
-		DNPRINTF(10, "%s: mpt_send_ioc_init ok\n", DEVNAME(mpt));
-
-		if (mpt_wait_state(mpt, MPT_DB_STATE_RUNNING) != MPT_OK) {
-			mpt_prt(mpt, "IOC failed to go to run state");
-			continue;
-		}
-
-		DNPRINTF(10, "%s: IOC now at RUNSTATE\n", DEVNAME(mpt));
-
-		/*
-		 * Give it reply buffers
-		 *
-		 * Do *not* exceed global credits.
-		 */
-		for (val = 0, pptr = mpt->reply_phys;
-		    (pptr + MPT_REPLY_SIZE) < (mpt->reply_phys + PAGE_SIZE);
-		    pptr += MPT_REPLY_SIZE) {
-			mpt_free_reply(mpt, pptr);
-			if (++val == mpt->mpt_global_credits - 1)
-				break;
-		}
-
-		/* XXX MU correct place the call to fw_upload? */
-		if (mpt->upload_fw) {
-			DNPRINTF(10, "%s: firmware upload required\n",
-			    DEVNAME(mpt));
-
-			if (mpt_do_upload(mpt))
-				/* XXX MP should we panic? */
-				mpt_prt(mpt, "firmware upload failure");
-		}
-		else
-			DNPRINTF(10, "%sfirmware upload not required\n",
-			    DEVNAME(mpt));
-
-		/*
-		 * Enable asynchronous event reporting
-		 */
-		mpt_send_event_request(mpt, 1);
-
-
-		/*
-		 * Read set up initial configuration information
-		 * (SPI only for now)
-		 */
-
-		if (mpt->is_fc == 0) {
-			if (mpt_read_config_info_spi(mpt))
-				return (EIO);
-
-			if (mpt_set_initial_config_spi(mpt))
-				return (EIO);
-		}
-
-		/*
-		 * Read IO Unit pages
-		 */
-		if (mpt_read_config_info_iou(mpt)) {
-			mpt_prt(mpt, "could not retrieve IO Unit pages");
-			return (EIO);
-		}
-
-		/*
-		 * if the vmware flag is set skip page retrival since it does
-		 * not support all of them.
-		 */
-		if (mpt->vmware)
-			DNPRINTF(10, "%s: running in vmware, skipping page "
-			    "retrieval\n", DEVNAME(mpt));
-		else {
-			/*
-			 * Read manufacturing pages
-			 */
-			if (mpt_read_config_info_mfg(mpt)) {
-				mpt_prt(mpt, "could not retrieve manufacturing"
-				    "pages");
-				return (EIO);
-			}
-
-			/*
-			 * Read IOC pages
-			 */
-			if (mpt_read_config_info_ioc(mpt)) {
-				mpt_prt(mpt, "could not retrieve IOC pages");
-				return (EIO);
-			}
-			mpt->im_support = mpt->mpt_ioc_page2.CapabilitiesFlags &
-				(MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT |
-				 MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT |
-				 MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT);
-
-			/*
-			 * Read RAID pages if we have IM/IME/IS volumes
-			 */
-			if (mpt->mpt_ioc_page2.NumActiveVolumes) {
-				if (mpt_read_config_info_raid(mpt)) {
-					mpt_prt(mpt, "could not retrieve RAID"
-					    "pages");
-					return (EIO);
-				}
-			}
-		}
-
-		/*
-		 * Now enable the port
-		 */
-		if (mpt_send_port_enable(mpt, 0) != MPT_OK) {
-			mpt_prt(mpt, "failed to enable port 0");
-			continue;
-		}
-
-		DNPRINTF(10, "%s: enabled port 0\n", DEVNAME(mpt));
-
-		/* Everything worked */
-		break;
-	}
-
-	if (try >= MPT_MAX_TRIES) {
-		mpt_prt(mpt, "failed to initialize IOC");
-		return (EIO);
-	}
-
-	DNPRINTF(10, "%s: enabling interrupts\n", DEVNAME(mpt));
-
-	mpt_enable_ints(mpt);
-	return (0);
-}
-
-/*
- * mpt_do_upload - create and send FWUpload request to MPT adapter port.
- *
- * Returns 0 for success, error for failure
- */
-int
-mpt_do_upload(struct mpt_softc *mpt)
-{
-	u_int8_t        request[MPT_RQSL(mpt)];
-	FWUploadReply_t reply;
-	FWUpload_t      *prequest;
-	FWUploadReply_t *preply;
-	FWUploadTCSGE_t *ptcsge = NULL;
-	SGE_SIMPLE32    *se;
-	int             maxsgl;
-	int             sgeoffset;
-	int             i, error;
-	uint32_t        flags;
-
-	if (mpt->fw_image_size == 0 || mpt->fw != NULL) {
-		return 0;
-	}
-
-	/* compute the maximum number of elements in the SG list */
-	maxsgl = (MPT_RQSL(mpt) - sizeof(MSG_FW_UPLOAD) +
-		sizeof(SGE_MPI_UNION) - sizeof(FWUploadTCSGE_t))
-		/ sizeof(SGE_SIMPLE32);
-
-	error = mpt_alloc_fw_mem(mpt, maxsgl);
-	if (error) {
-		mpt_prt(mpt,"mpt_alloc_fw_mem error: %d", error);
-		return error;
-	}
-
-	if (mpt->fw_dmap->dm_nsegs > maxsgl) {
-		mpt_prt(mpt,"nsegs > maxsgl");
-		return 1; /* XXX */
-	}
-
-	prequest = (FWUpload_t *)&request;
-	preply = (FWUploadReply_t *)&reply;
-
-	memset(prequest, 0, MPT_RQSL(mpt));
-	memset(preply, 0, sizeof(reply));
-
-	prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
-	prequest->Function = MPI_FUNCTION_FW_UPLOAD;
-	prequest->MsgContext = 0;
-
-	ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
-	ptcsge->Reserved = 0;
-	ptcsge->ContextSize = 0;
-	ptcsge->DetailsLength = 12;
-	ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
-	ptcsge->Reserved1 = 0;
-	ptcsge->ImageOffset = 0;
-	ptcsge->ImageSize = mpt->fw_image_size; /* XXX MU check endianess */
-
-	sgeoffset = sizeof(FWUpload_t) - sizeof(SGE_MPI_UNION) +
-		sizeof(FWUploadTCSGE_t);
-
-	se = (SGE_SIMPLE32 *) &request[sgeoffset];
-
-	flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT;
-
-	DNPRINTF(20, "%s: assembling SG list (%d entries)\n",
-	    DEVNAME(mpt), mpt->fw_dmap->dm_nsegs);
-
-	for (i = 0; i < mpt->fw_dmap->dm_nsegs; i++, se++) {
-		if (i == mpt->fw_dmap->dm_nsegs - 1) {
-			/* XXX MU okay? */
-			flags |= MPI_SGE_FLAGS_LAST_ELEMENT |
-				MPI_SGE_FLAGS_END_OF_BUFFER |
-				MPI_SGE_FLAGS_END_OF_LIST;
-		}
-
-		se->Address = mpt->fw_dmap->dm_segs[i].ds_addr;
-		MPI_pSGE_SET_LENGTH(se, mpt->fw_dmap->dm_segs[i].ds_len);
-		MPI_pSGE_SET_FLAGS(se, flags);
-		sgeoffset += sizeof(*se);
-	}
-
-	DNPRINTF(10, "%s: sending FW Upload request to IOC (size: %d, "
-		"img size: %d)\n", DEVNAME(mpt), sgeoffset, mpt->fw_image_size);
-
-	if ((error = mpt_send_handshake_cmd(mpt, sgeoffset, prequest)) != 0) {
-		return(error);
-	}
-
-	error = mpt_recv_handshake_reply(mpt, sizeof(reply), &reply);
-
-	if (error == 0) {
-		/*
-		 * Handshake transfer was complete and successfull.
-		 * Check the Reply Frame
-		 */
-		int status, transfer_sz;
-
-		status = preply->IOCStatus;
-		DNPRINTF(20, "%s: fw_upload reply status %d\n",
-		    DEVNAME(mpt), status);
-
-		if (status == MPI_IOCSTATUS_SUCCESS) {
-			transfer_sz = preply->ActualImageSize;
-			if (transfer_sz != mpt->fw_image_size)
-				error = EFAULT;
-		}
-		else
-			error = EFAULT;
-	}
-
-	if (error == 0) {
-		mpt->upload_fw = 0;
-	}
-	else {
-		mpt_prt(mpt, "freeing image memory");
-		mpt_free_fw_mem(mpt);
-		mpt->fw = NULL;
-	}
-
-	return error;
-}
-
-/*
- * mpt_downloadboot - DownloadBoot code
- * Returns 0 for success, <0 for failure
- */
-int
-mpt_downloadboot(struct mpt_softc *mpt)
-{
-	MpiFwHeader_t		*fwhdr = NULL;
-	MpiExtImageHeader_t	*exthdr = NULL;
-	int			fw_size;
-	u_int32_t		diag0;
-#ifdef MPT_DEBUG
-	u_int32_t		diag1;
-#endif
-	int			count = 0;
-	u_int32_t		*ptr = NULL;
-	u_int32_t		nextimg;
-	u_int32_t		load_addr;
-	u_int32_t		diagrw_data;
-
-#ifdef MPT_DEBUG
-	diag0 = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC);
-	if (mpt->mpt2)
-		diag1 = mpt_read(mpt->mpt2, MPT_OFFSET_DIAGNOSTIC);
-	mpt_prt(mpt, "diag0=%08x, diag1=%08x", diag0, diag1);
-#endif
-	mpt_prt(mpt, "fw size 0x%x, ioc FW ptr %p", mpt->fw_image_size,
-	    mpt->fw);
-	if (mpt->mpt2)
-		mpt_prt(mpt->mpt2, "ioc FW ptr %p", mpt->mpt2->fw);
-
-	fw_size = mpt->fw_image_size;
-
-	if (fw_size == 0)
-		return -1;
-
-	mpt_prt(mpt, "FW Image @ %p", mpt->fw);
-
-	if (!mpt->fw)
-		return -2;
-
-	/*
-	 * Write magic sequence to WriteSequence register
-	 * until enter diagnostic mode
-	 */
-	diag0 = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC);
-	while ((diag0 & MPI_DIAG_DRWE) == 0) {
-		mpt_write(mpt, MPT_OFFSET_SEQUENCE, 0xFF);
-		mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_1);
-		mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_2);
-		mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_3);
-		mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_4);
-		mpt_write(mpt, MPT_OFFSET_SEQUENCE, MPT_DIAG_SEQUENCE_5);
-
-		/* wait 100msec */
-		DELAY(100);
-
-		count++;
-		if (count > 20) {
-			mpt_prt(mpt, "enable diagnostic mode FAILED! (%02xh)",
-			    diag0);
-			return -EFAULT;
-		}
-
-		diag0 = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC);
-#ifdef MPT_DEBUG
-		if (mpt->mpt2)
-			diag1 = mpt_read(mpt->mpt2, MPT_OFFSET_DIAGNOSTIC);
-		mpt_prt(mpt, "diag0=%08x, diag1=%08x", diag0, diag1);
-#endif
-		mpt_prt(mpt, "wrote magic DiagWriteEn sequence (%x)", diag0);
-	}
-
-	/* Set the DiagRwEn and Disable ARM bits */
-	diag0 |= (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM);
-	mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC, diag0);
-
-#ifdef MPT_DEBUG
-	if (mpt->mpt2)
-		diag1 = mpt_read(mpt->mpt2, MPT_OFFSET_DIAGNOSTIC);
-	mpt_prt(mpt, "diag0=%08x, diag1=%08x", diag0, diag1);
-#endif
-
-	fwhdr = (MpiFwHeader_t *) mpt->fw;
-	ptr = (u_int32_t *) fwhdr;
-	count = (fwhdr->ImageSize + 3)/4;
-	nextimg = fwhdr->NextImageHeaderOffset;
-
-	/*
-	 * write the LoadStartAddress to the DiagRw Address Register
-	 * XXX linux is using programmed IO for the RWADDR and RWDATA
-	 */
-	mpt_write(mpt, MPT_OFFSET_RWADDR, fwhdr->LoadStartAddress);
-
-	mpt_prt(mpt, "LoadStart addr written 0x%x", fwhdr->LoadStartAddress);
-	mpt_prt(mpt, "writing file image: 0x%x u32's @ %p", count, ptr);
-
-	while (count--) {
-		mpt_write(mpt, MPT_OFFSET_RWDATA, *ptr);
-		ptr++;
-	}
-
-	while (nextimg) {
-		ptr = (u_int32_t *) (mpt->fw + nextimg);
-		exthdr = (MpiExtImageHeader_t *) ptr;
-		count = (exthdr->ImageSize +3)/4;
-		nextimg = exthdr->NextImageHeaderOffset;
-		load_addr = exthdr->LoadStartAddress;
-
-		mpt_prt(mpt, "write ext image: 0x%x u32's @ %p", count, ptr);
-
-		mpt_write(mpt, MPT_OFFSET_RWADDR, load_addr);
-
-		while (count--) {
-			mpt_write(mpt, MPT_OFFSET_RWDATA, *ptr);
-			ptr++;
-		}
-	}
-
-	/* write the IopResetVectorRegAddr */
-	mpt_prt(mpt, "write IopResetVector addr!");
-	mpt_write(mpt, MPT_OFFSET_RWADDR, fwhdr->IopResetRegAddr);
-
-	/* write the IopResetVectorValue */
-	mpt_prt(mpt, "write IopResetVector value!");
-	mpt_write(mpt, MPT_OFFSET_RWDATA, fwhdr->IopResetVectorValue);
-
-	/*
-	 * clear the internal flash bad bit - autoincrementing register,
-	 * so must do two writes.
-	 */
-	mpt_write(mpt, MPT_OFFSET_RWADDR, 0x3F000000);
-	diagrw_data = mpt_read(mpt, MPT_OFFSET_RWDATA);
-	diagrw_data |= 0x4000000;
-	mpt_write(mpt, MPT_OFFSET_RWADDR, 0x3F000000);
-	mpt_write(mpt, MPT_OFFSET_RWDATA, diagrw_data);
-
-	/* clear the RW enable and DISARM bits */
-	diag0 = mpt_read(mpt, MPT_OFFSET_DIAGNOSTIC);
-	diag0 &= ~(MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE |
-	    MPI_DIAG_FLASH_BAD_SIG);
-	mpt_write(mpt, MPT_OFFSET_DIAGNOSTIC, diag0);
-
-	/* write 0xFF to reset the sequencer */
-	mpt_write(mpt, MPT_OFFSET_SEQUENCE, 0xFF);
-
-	return 0;
-}
diff --git a/sys/dev/ic/mpt.h b/sys/dev/ic/mpt.h
deleted file mode 100644
index 24c1141e375..00000000000
--- a/sys/dev/ic/mpt.h
+++ /dev/null
@@ -1,217 +0,0 @@
-/*	$OpenBSD: mpt.h,v 1.8 2006/02/04 19:05:00 marco Exp $	*/
-/*	$NetBSD: mpt.h,v 1.2 2003/07/08 10:06:31 itojun Exp $	*/
-
-/*
- * Copyright (c) 2000, 2001 by Greg Ansley
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice immediately at the beginning of the file, without modification,
- *    this list of conditions, and the following disclaimer.
- * 2. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-/*
- * Additional Copyright (c) 2002 by Matthew Jacob under same license.
- */
-
-/*
- * mpt.h:
- *
- * Generic definitions for LSI Fusion adapters.
- * 
- * Adapted from the FreeBSD "mpt" driver by Jason R. Thorpe for
- * Wasabi Systems, Inc.
- */
-
-#ifndef _DEV_IC_MPT_H_
-#define	_DEV_IC_MPT_H_
-
-#define DEVNAME(s)  ((s)->mpt_dev.dv_xname)
-
-/* #define MPT_DEBUG */
-#ifdef MPT_DEBUG
-extern int mpt_debug;
-#define DPRINTF(x...)     do { if (mpt_debug) printf(x); } while(0)
-#define DNPRINTF(n,x...)  do { if (mpt_debug > (n)) printf(x); } while(0)
-#else
-#define DPRINTF(x...) do { } while (0)
-#define DNPRINTF(n,x...) do { } while (0)
-#endif
-
-#include <dev/ic/mpt_openbsd.h>
-
-#define MPT_OK (0)
-#define MPT_FAIL (0x10000)
-
-/* Register Offset to chip registers */
-#define MPT_OFFSET_DOORBELL     0x00
-#define MPT_OFFSET_SEQUENCE     0x04
-#define MPT_OFFSET_DIAGNOSTIC   0x08
-#define MPT_OFFSET_TEST         0x0C
-#define MPT_OFFSET_RWDATA       0x10
-#define MPT_OFFSET_RWADDR       0x14
-#define MPT_OFFSET_INTR_STATUS  0x30
-#define MPT_OFFSET_INTR_MASK    0x34
-#define MPT_OFFSET_REQUEST_Q    0x40
-#define MPT_OFFSET_REPLY_Q      0x44
-#define MPT_OFFSET_HOST_INDEX   0x50
-#define MPT_OFFSET_FUBAR        0x90
-
-#define MPT_DIAG_SEQUENCE_1     0x04
-#define MPT_DIAG_SEQUENCE_2     0x0b
-#define MPT_DIAG_SEQUENCE_3     0x02
-#define MPT_DIAG_SEQUENCE_4     0x07
-#define MPT_DIAG_SEQUENCE_5     0x0d
-
-/* Bit Maps for DOORBELL register */
-enum DB_STATE_BITS {
-	MPT_DB_STATE_RESET   =    0x00000000,
-	MPT_DB_STATE_READY   =    0x10000000,
-	MPT_DB_STATE_RUNNING =    0x20000000,
-	MPT_DB_STATE_FAULT   =    0x40000000,
-	MPT_DB_STATE_MASK    =    0xf0000000
-};
-
-#define MPT_STATE(v) ((enum DB_STATE_BITS)((v) & MPT_DB_STATE_MASK))
-
-#define MPT_DB_LENGTH_SHIFT (16)
-#define MPT_DB_DATA_MASK (0xffff)
-
-#define MPT_DB_DB_USED            0x08000000
-#define MPT_DB_IS_IN_USE(v) (((v) & MPT_DB_DB_USED) != 0)
-
-/*
- * "Whom" initializor values
- */
-#define	MPT_DB_INIT_NOONE       0x00
-#define	MPT_DB_INIT_BIOS        0x01
-#define	MPT_DB_INIT_ROMBIOS     0x02
-#define	MPT_DB_INIT_PCIPEER     0x03
-#define	MPT_DB_INIT_HOST        0x04
-#define	MPT_DB_INIT_MANUFACTURE 0x05
-
-#define MPT_WHO(v)	\
-	((v & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT)
-
-/* Function Maps for DOORBELL register */
-enum DB_FUNCTION_BITS {
-	MPT_FUNC_IOC_RESET    =    0x40000000,
-	MPT_FUNC_UNIT_RESET   =    0x41000000,
-	MPT_FUNC_HANDSHAKE    =    0x42000000,
-	MPT_FUNC_REPLY_REMOVE =    0x43000000,
-	MPT_FUNC_MASK         =    0xff000000
-};
-
-/* Function Maps for INTERRUPT request register */
-enum _MPT_INTR_REQ_BITS {
-	MPT_INTR_DB_BUSY      =    0x80000000,
-	MPT_INTR_REPLY_READY  =    0x00000008,
-	MPT_INTR_DB_READY     =    0x00000001
-};
-
-#define MPT_DB_IS_BUSY(v) (((v) & MPT_INTR_DB_BUSY) != 0)
-#define MPT_DB_INTR(v)    (((v) & MPT_INTR_DB_READY) != 0)
-#define MPT_REPLY_INTR(v) (((v) & MPT_INTR_REPLY_READY) != 0)
-
-/* Function Maps for INTERRUPT make register */
-enum _MPT_INTR_MASK_BITS {
-	MPT_INTR_REPLY_MASK   =    0x00000008,
-	MPT_INTR_DB_MASK      =    0x00000001
-};
-
-/* Function Maps for DIAGNOSTIC make register */
-enum _MPT_DIAG_BITS {
-	MPT_DIAG_ENABLED      =    0x00000080,
-	MPT_DIAG_FLASHBAD     =    0x00000040,
-	MPT_DIAG_RESET_HIST   =    0x00000020,
-	MPT_DIAG_TTLI         =    0x00000008,
-	MPT_DIAG_RESET_IOC    =    0x00000004,
-	MPT_DIAG_ARM_DISABLE  =    0x00000002,
-	MPT_DIAG_DME          =    0x00000001
-};
-
-/* Magic addresses in diagnostic memory space */
-#define MPT_DIAG_IOP_BASE        (0x00000000)
-#define MPT_DIAG_IOP_SIZE                      (0x00002000)
-#define MPT_DIAG_GPIO            (0x00030010)
-#define MPT_DIAG_IOPQ_REG_BASE0  (0x00050004)
-#define MPT_DIAG_IOPQ_REG_BASE1  (0x00051004)
-#define MPT_DIAG_MEM_CFG_BASE    (0x00040000)
-#define MPT_DIAG_CTX0_BASE       (0x000E0000)
-#define MPT_DIAG_CTX0_SIZE                     (0x00002000)
-#define MPT_DIAG_CTX1_BASE       (0x001E0000)
-#define MPT_DIAG_CTX1_SIZE                     (0x00002000)
-#define MPT_DIAG_FLASH_BASE      (0x00800000)
-#define MPT_DIAG_RAM_BASE        (0x01000000)
-#define MPT_DIAG_RAM_SIZE                      (0x00400000)
-
-/* GPIO bit assignments */
-#define MPT_DIAG_GPIO_SCL	(0x00010000)
-#define MPT_DIAG_GPIO_SDA_OUT	(0x00008000)
-#define MPT_DIAG_GPIO_SDA_IN	(0x00004000)
-
-#define MPT_REPLY_EMPTY   (0xffffffff)    /* Reply Queue Empty Symbol */
-#define MPT_CONTEXT_REPLY (0x80000000)
-#define MPT_CONTEXT_MASK  (~0xE0000000)
-
-#ifdef _KERNEL
-int mpt_soft_reset(struct mpt_softc *);
-void mpt_hard_reset(struct mpt_softc *);
-int mpt_recv_handshake_reply(struct mpt_softc *, size_t, void *);
-
-void mpt_send_cmd(struct mpt_softc *, struct req_entry *);
-void mpt_free_reply(struct mpt_softc *, u_int32_t);
-void mpt_enable_ints(struct mpt_softc *);
-void mpt_disable_ints(struct mpt_softc *);
-u_int32_t mpt_pop_reply_queue(struct mpt_softc *);
-int mpt_init(struct mpt_softc *, u_int32_t);
-int mpt_reset(struct mpt_softc *);
-int mpt_send_handshake_cmd(struct mpt_softc *, size_t, void *);
-struct req_entry * mpt_get_request(struct mpt_softc *);
-void mpt_free_request(struct mpt_softc *, struct req_entry *);
-void mpt_init_request(struct mpt_softc *, struct req_entry *);
-int mpt_intr(void *);
-void mpt_check_doorbell(struct mpt_softc *);
-
-int mpt_read_cfg_page(struct mpt_softc *, int, CONFIG_PAGE_HEADER *);
-int mpt_write_cfg_page(struct mpt_softc *, int, CONFIG_PAGE_HEADER *);
-int mpt_read_cfg_header(struct mpt_softc *, int, int, int, CONFIG_PAGE_HEADER *);
-
-/* FW Download Boot */
-int mpt_downloadboot(struct mpt_softc *);
-int mpt_do_upload(struct mpt_softc *);
-int mpt_alloc_fw_mem(struct mpt_softc *, int);
-void mpt_free_fw_mem(struct mpt_softc *);
-
-/* mpt_debug.c functions */
-#ifdef MPT_DEBUG
-void mpt_print_config_reply(void *);
-void mpt_print_scsi_io_request(MSG_SCSI_IO_REQUEST *);
-void mpt_print_config_request(void *);
-void mpt_print_request(void *);
-void mpt_print_db(u_int32_t);
-void mpt_print_reply(void *);
-char *mpt_ioc_diag(u_int32_t);
-char *mpt_req_state(enum mpt_req_state);
-#else
-#define mpt_print_db(x)
-#endif /* MPT_DEBUG */
-
-#endif /* _KERNEL */
-
-#endif /* _DEV_IC_MPT_H_ */
diff --git a/sys/dev/ic/mpt_debug.c b/sys/dev/ic/mpt_debug.c
deleted file mode 100644
index b446b27138d..00000000000
--- a/sys/dev/ic/mpt_debug.c
+++ /dev/null
@@ -1,644 +0,0 @@
-/*	$OpenBSD: mpt_debug.c,v 1.5 2006/02/04 19:05:00 marco Exp $	*/
-/*	$NetBSD: mpt_debug.c,v 1.2 2003/07/14 15:47:11 lukem Exp $	*/
-
-/*
- * Copyright (c) 2000, 2001 by Greg Ansley
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice immediately at the beginning of the file, without modification,
- *    this list of conditions, and the following disclaimer.
- * 2. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-/*
- * Additional Copyright (c) 2002 by Matthew Jacob under same license.
- */
-
-/*
- * mpt_debug.c:
- *
- * Debug routines for LSI Fusion adapters.
- */
-
-#include <sys/cdefs.h>
-/* __KERNEL_RCSID(0, "$NetBSD: mpt_debug.c,v 1.2 2003/07/14 15:47:11 lukem Exp $"); */
-
-#include <dev/ic/mpt.h>
-
-#ifdef MPT_DEBUG
-char *mpt_ioc_status(int);
-char *mpt_ioc_function(int);
-char *mpt_ioc_event(int);
-char *mpt_scsi_state(int);
-char *mpt_scsi_status(int);
-char *mpt_who(int);
-char *mpt_state(u_int32_t);
-void mpt_print_reply_hdr(MSG_DEFAULT_REPLY *);
-void mpt_print_init_reply(MSG_IOC_INIT_REPLY *);
-void mpt_print_ioc_facts(MSG_IOC_FACTS_REPLY *);
-void mpt_print_enable_reply(MSG_PORT_ENABLE_REPLY *);
-void mpt_print_scsi_io_reply(MSG_SCSI_IO_REPLY *);
-void mpt_print_event_notice(MSG_EVENT_NOTIFY_REPLY *);
-void mpt_print_request_hdr(MSG_REQUEST_HEADER *);
-
-struct Error_Map {
-	int 	 Error_Code;
-	char    *Error_String;
-};
-
-static const struct Error_Map IOC_Status[] = {
-{ MPI_IOCSTATUS_SUCCESS,                  "Success" },
-{ MPI_IOCSTATUS_INVALID_FUNCTION,         "IOC: Invalid Function" },
-{ MPI_IOCSTATUS_BUSY,                     "IOC: Busy" },
-{ MPI_IOCSTATUS_INVALID_SGL,              "IOC: Invalid SGL" },
-{ MPI_IOCSTATUS_INTERNAL_ERROR,           "IOC: Internal Error" },
-{ MPI_IOCSTATUS_RESERVED,                 "IOC: Reserved" },
-{ MPI_IOCSTATUS_INSUFFICIENT_RESOURCES,   "IOC: Insufficient Resources" },
-{ MPI_IOCSTATUS_INVALID_FIELD,            "IOC: Invalid Field" },
-{ MPI_IOCSTATUS_INVALID_STATE,            "IOC: Invalid State" },
-{ MPI_IOCSTATUS_CONFIG_INVALID_ACTION,    "Invalid Action" },
-{ MPI_IOCSTATUS_CONFIG_INVALID_TYPE,      "Invalid Type" },
-{ MPI_IOCSTATUS_CONFIG_INVALID_PAGE,      "Invalid Page" },
-{ MPI_IOCSTATUS_CONFIG_INVALID_DATA,      "Invalid Data" },
-{ MPI_IOCSTATUS_CONFIG_NO_DEFAULTS,       "No Defaults" },
-{ MPI_IOCSTATUS_CONFIG_CANT_COMMIT,       "Can't Commit" },
-{ MPI_IOCSTATUS_SCSI_RECOVERED_ERROR,     "SCSI: Recoverd Error" },
-{ MPI_IOCSTATUS_SCSI_INVALID_BUS,         "SCSI: Invalid Bus" },
-{ MPI_IOCSTATUS_SCSI_INVALID_TARGETID,    "SCSI: Invalid Target ID" },
-{ MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE,    "SCSI: Device Not There" },
-{ MPI_IOCSTATUS_SCSI_DATA_OVERRUN,        "SCSI: Data Overrun" },
-{ MPI_IOCSTATUS_SCSI_DATA_UNDERRUN,       "SCSI: Data Underrun" },
-{ MPI_IOCSTATUS_SCSI_IO_DATA_ERROR,       "SCSI: Data Error" },
-{ MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR,      "SCSI: Protocol Error" },
-{ MPI_IOCSTATUS_SCSI_TASK_TERMINATED,     "SCSI: Task Terminated" },
-{ MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH,   "SCSI: Residual Mismatch" },
-{ MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED,    "SCSI: Task Management Failed" },
-{ MPI_IOCSTATUS_SCSI_IOC_TERMINATED,      "SCSI: IOC Bus Reset" },
-{ MPI_IOCSTATUS_SCSI_EXT_TERMINATED,      "SCSI: External Bus Reset" },
-{ MPI_IOCSTATUS_TARGET_PRIORITY_IO,       "SCSI Target: Priority I/O" },
-{ MPI_IOCSTATUS_TARGET_INVALID_PORT,      "SCSI Target: Invalid Port" },
-{ MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX,  "SCSI Target: Invalid IOC Index" },
-{ MPI_IOCSTATUS_TARGET_ABORTED,           "SCSI Target: Aborted" },
-{ MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE, "SCSI Target: No Connection (Retryable)" },
-{ MPI_IOCSTATUS_TARGET_NO_CONNECTION,     "SCSI Target: No Connection" },
-{ MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH,"SCSI Target: Transfer Count Mismatch" },
-{ MPI_IOCSTATUS_TARGET_FC_ABORTED,        "FC: Aborted" },
-{ MPI_IOCSTATUS_TARGET_FC_RX_ID_INVALID,  "FC: Recieve ID Invalid" },
-{ MPI_IOCSTATUS_TARGET_FC_DID_INVALID,    "FC: Recieve DID Invalid" },
-{ MPI_IOCSTATUS_TARGET_FC_NODE_LOGGED_OUT,"FC: Node Logged Out" },
-{ MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND,     "LAN: Device Not Found" },
-{ MPI_IOCSTATUS_LAN_DEVICE_FAILURE,       "LAN: Device Not Failure" },
-{ MPI_IOCSTATUS_LAN_TRANSMIT_ERROR,       "LAN: Transmit Error" },
-{ MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED,     "LAN: Transmit Aborted" },
-{ MPI_IOCSTATUS_LAN_RECEIVE_ERROR,        "LAN: Recieve Error" },
-{ MPI_IOCSTATUS_LAN_RECEIVE_ABORTED,      "LAN: Recieve Aborted" },
-{ MPI_IOCSTATUS_LAN_PARTIAL_PACKET,       "LAN: Partial Packet" },
-{ MPI_IOCSTATUS_LAN_CANCELED,             "LAN: Canceled" },
-{ -1, 0},
-};
-
-static const struct Error_Map IOC_Func[] = {
-{ MPI_FUNCTION_SCSI_IO_REQUEST,              "SCSI IO Request" },
-{ MPI_FUNCTION_SCSI_TASK_MGMT,               "SCSI Task Management" },
-{ MPI_FUNCTION_IOC_INIT,                     "IOC Init" },
-{ MPI_FUNCTION_IOC_FACTS,                    "IOC Facts" },
-{ MPI_FUNCTION_CONFIG,                       "Config" },
-{ MPI_FUNCTION_PORT_FACTS,                   "Port Facts" },
-{ MPI_FUNCTION_PORT_ENABLE,                  "Port Enable" },
-{ MPI_FUNCTION_EVENT_NOTIFICATION,           "Event Notification" },
-{ MPI_FUNCTION_FW_DOWNLOAD,                  "FW Download" },
-{ MPI_FUNCTION_TARGET_CMD_BUFFER_POST,       "SCSI Target Command Buffer" },
-{ MPI_FUNCTION_TARGET_ASSIST,                "Target Assist" },
-{ MPI_FUNCTION_TARGET_STATUS_SEND,           "Target Status Send" },
-{ MPI_FUNCTION_TARGET_MODE_ABORT,            "Target Mode Abort" },
-{ MPI_FUNCTION_TARGET_FC_BUF_POST_LINK_SRVC, "FC: Link Service Buffers" },
-{ MPI_FUNCTION_TARGET_FC_RSP_LINK_SRVC,      "FC: Link Service Response" },
-{ MPI_FUNCTION_TARGET_FC_EX_SEND_LINK_SRVC,  "FC: Send Extended Link Service" },
-{ MPI_FUNCTION_TARGET_FC_ABORT,              "FC: Abort" },
-{ MPI_FUNCTION_LAN_SEND,                     "LAN Send" },
-{ MPI_FUNCTION_LAN_RECEIVE,                  "LAN Recieve" },
-{ MPI_FUNCTION_LAN_RESET,                    "LAN Reset" },
-{ -1, 0},
-};
-
-static const struct Error_Map IOC_Event[] = {
-{ MPI_EVENT_NONE,   	                "None" },
-{ MPI_EVENT_LOG_DATA,                   "LogData" },
-{ MPI_EVENT_STATE_CHANGE,               "State Change" },
-{ MPI_EVENT_UNIT_ATTENTION,             "Unit Attention" },
-{ MPI_EVENT_IOC_BUS_RESET,              "IOC Bus Reset" },
-{ MPI_EVENT_EXT_BUS_RESET,              "External Bus Reset" },
-{ MPI_EVENT_RESCAN,        	        "Rescan" },
-{ MPI_EVENT_LINK_STATUS_CHANGE,	        "Link Status Change" },
-{ MPI_EVENT_LOOP_STATE_CHANGE, 	        "Loop State Change" },
-{ MPI_EVENT_LOGOUT,    	       		"Logout" },
-{ MPI_EVENT_EVENT_CHANGE,               "EventChange" },
-{ -1, 0},
-};
-
-static const struct Error_Map IOC_SCSIState[] = {
-{ MPI_SCSI_STATE_AUTOSENSE_VALID,	"AutoSense_Valid" },
-{ MPI_SCSI_STATE_AUTOSENSE_FAILED,	"AutoSense_Failed" },
-{ MPI_SCSI_STATE_NO_SCSI_STATUS,	"No_SCSI_Status" },
-{ MPI_SCSI_STATE_TERMINATED,	   	"State_Terminated" },
-{ MPI_SCSI_STATE_RESPONSE_INFO_VALID,	"Repsonse_Info_Valid" },
-{ MPI_SCSI_STATE_QUEUE_TAG_REJECTED,	"Queue Tag Rejected" },
-{ -1, 0},
-};
-
-static const struct Error_Map IOC_SCSIStatus[] = {
-{ SCSI_OK,				"OK" },
-{ SCSI_CHECK,			"Check Condition" },
-#if 0
-{ SCSI_STATUS_COND_MET,			"Check Condition Met" },
-#endif
-{ SCSI_BUSY,				"Busy" },
-{ SCSI_INTERM,				"Intermediate Condition" },
-#if 0
-{ SCSI_STATUS_INTERMED_COND_MET,	"Intermediate Condition Met" },
-#endif
-{ SCSI_RESV_CONFLICT,			"Reservation Conflict" },
-#if 0
-{ SCSI_STATUS_CMD_TERMINATED,		"Command Terminated" },
-#endif
-{ SCSI_QUEUE_FULL,			"Queue Full" },
-{ -1, 0},
-};
-
-static const struct Error_Map IOC_Diag[] = {
-{ MPT_DIAG_ENABLED,	"DWE" },
-{ MPT_DIAG_FLASHBAD,	"FLASH_Bad" },
-{ MPT_DIAG_TTLI,	"TTLI" },
-{ MPT_DIAG_RESET_IOC,	"Reset" },
-{ MPT_DIAG_ARM_DISABLE,	"DisARM" },
-{ MPT_DIAG_DME,		"DME" },
-{ -1, 0 },
-};
-
-
-void mpt_dump_sgl(SGE_IO_UNION *sgl);
-
-char *
-mpt_ioc_status(int code)
-{
-	const struct Error_Map *status = IOC_Status;
-	static char buf[64];
-	while (status->Error_Code >= 0) {
-		if (status->Error_Code == (code & MPI_IOCSTATUS_MASK))
-			return status->Error_String;
-		status++;
-	}
-	snprintf(buf, sizeof buf, "Unknown (0x%08x)", code);
-	return buf;
-}
-
-char *
-mpt_ioc_diag(u_int32_t code)
-{
-	const struct Error_Map *status = IOC_Diag;
-	static char buf[128];
-	char *ptr = buf;
-	char *end = &buf[128];
-	int len;
-
-	buf[0] = '\0';
-	len = snprintf(buf, sizeof buf, "(0x%08x)", code);
-	if (len == -1 || len > sizeof buf)
-		return buf;
-	ptr += len;
-	while (status->Error_Code >= 0) {
-		if ((status->Error_Code & code) != 0) {
-			len = snprintf(ptr, (size_t)(end-ptr), "%s ",
-			    status->Error_String);
-			if (len == -1 || len > end - ptr)
-				return buf;
-			ptr += len;
-		}
-		status++;
-	}
-	return buf;
-}
-
-char *
-mpt_ioc_function(int code)
-{
-	const struct Error_Map *status = IOC_Func;
-	static char buf[64];
-	while (status->Error_Code >= 0) {
-		if (status->Error_Code == code)
-			return status->Error_String;
-		status++;
-	}
-	snprintf(buf, sizeof buf, "Unknown (0x%08x)", code);
-	return buf;
-}
-char *
-mpt_ioc_event(int code)
-{
-	const struct Error_Map *status = IOC_Event;
-	static char buf[64];
-	while (status->Error_Code >= 0) {
-		if (status->Error_Code == code)
-			return status->Error_String;
-		status++;
-	}
-	snprintf(buf, sizeof buf, "Unknown (0x%08x)", code);
-	return buf;
-}
-char *
-mpt_scsi_state(int code)
-{
-	const struct Error_Map *status = IOC_SCSIState;
-	static char buf[128];
-	char *ptr = buf;
-	char *end = &buf[128];
-	int len;
-
-	buf[0] = '\0';
-	len = snprintf(buf, sizeof buf, "(0x%08x)", code);
-	if (len == -1 || len > sizeof buf)
-		return buf;
-	ptr += len;
-	while (status->Error_Code >= 0) {
-		if ((status->Error_Code & code) != 0) {
-			len = snprintf(ptr, (size_t)(end-ptr), "%s ",
-			    status->Error_String);
-			if (len == -1 || len > end - ptr)
-				return buf;
-			ptr += len;
-		}
-		status++;
-	}
-	return buf;
-}
-char *
-mpt_scsi_status(int code)
-{
-	const struct Error_Map *status = IOC_SCSIStatus;
-	static char buf[64];
-	while (status->Error_Code >= 0) {
-		if (status->Error_Code == code)
-			return status->Error_String;
-		status++;
-	}
-	snprintf(buf, sizeof buf, "Unknown (0x%08x)", code);
-	return buf;
-}
-
-char *
-mpt_who(int who_init)
-{
-	char *who;
-
-	switch (who_init) {
-	case MPT_DB_INIT_NOONE:       who = "No One";        break;
-	case MPT_DB_INIT_BIOS:        who = "BIOS";          break;
-	case MPT_DB_INIT_ROMBIOS:     who = "ROM BIOS";      break;
-	case MPT_DB_INIT_PCIPEER:     who = "PCI Peer";      break;
-	case MPT_DB_INIT_HOST:        who = "Host Driver";   break;
-	case MPT_DB_INIT_MANUFACTURE: who = "Manufacturing"; break;
-	default:                      who = "Unknown";       break;
-	}
-	return who;
-}
-
-char *
-mpt_state(u_int32_t mb)
-{
-	char *text;
-
-	switch (MPT_STATE(mb)) {
-		case MPT_DB_STATE_RESET:  text = "Reset";   break;
-		case MPT_DB_STATE_READY:  text = "Ready";   break;
-		case MPT_DB_STATE_RUNNING:text = "Running"; break;
-		case MPT_DB_STATE_FAULT:  text = "Fault";   break;
-		default: 		  text = "Unknown"; break;
-	}
-	return text;
-};
-
-void
-mpt_print_db(u_int32_t mb)
-{
-	printf("mpt mailbox: (0x%x) State %s  WhoInit %s\n",
-	    mb, mpt_state(mb), mpt_who(MPT_WHO(mb)));
-}
-
-/*****************************************************************************/
-/*  Reply functions                                                          */
-/*****************************************************************************/
-void
-mpt_print_reply_hdr(MSG_DEFAULT_REPLY *msg)
-{
-	printf("%s Reply @ %p\n", mpt_ioc_function(msg->Function), msg);
-	printf("\tIOC Status    %s\n", mpt_ioc_status(msg->IOCStatus));
-	printf("\tIOCLogInfo    0x%08x\n", msg->IOCLogInfo);
-	printf("\tMsgLength     0x%02x\n", msg->MsgLength);
-	printf("\tMsgFlags      0x%02x\n", msg->MsgFlags);
-	printf("\tMsgContext    0x%08x\n", msg->MsgContext);
-}
-
-void
-mpt_print_init_reply(MSG_IOC_INIT_REPLY *msg)
-{
-	mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
-	printf("\tWhoInit       %s\n", mpt_who(msg->WhoInit));
-	printf("\tMaxDevices    0x%02x\n", msg->MaxDevices);
-	printf("\tMaxBuses     0x%02x\n", msg->MaxBuses);
-}
-
-void
-mpt_print_ioc_facts(MSG_IOC_FACTS_REPLY *msg)
-{
-	mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
-	printf("\tIOCNumber     %d\n",		msg->IOCNumber);
-	printf("\tMaxChainDepth %d\n",		msg->MaxChainDepth);
-	printf("\tWhoInit       %s\n",		mpt_who(msg->WhoInit));
-	printf("\tBlockSize     %d\n",		msg->BlockSize);
-	printf("\tFlags         %d\n",		msg->Flags);
-	printf("\tReplyQueueDepth %d\n",	msg->ReplyQueueDepth);
-	printf("\tReqFrameSize  0x%04x\n",	msg->RequestFrameSize);
-	printf("\tFW Version    0x%08x\n",	msg->FWVersion.Word);
-	printf("\tProduct ID    0x%04x\n",	msg->ProductID);
-	printf("\tCredits       0x%04x\n",	msg->GlobalCredits);
-	printf("\tPorts         %d\n",		msg->NumberOfPorts);
-	printf("\tEventState    0x%02x\n",	msg->EventState);
-	printf("\tHostMFA_HA    0x%08x\n",	msg->CurrentHostMfaHighAddr);
-	printf("\tSenseBuf_HA   0x%08x\n",
-	    msg->CurrentSenseBufferHighAddr);
-	printf("\tRepFrameSize  0x%04x\n",	msg->CurReplyFrameSize);
-	printf("\tMaxDevices    0x%02x\n",	msg->MaxDevices);
-	printf("\tMaxBuses      0x%02x\n",	msg->MaxBuses);
-	printf("\tFWImageSize   0x%04x\n",	msg->FWImageSize);
-}
-
-void
-mpt_print_enable_reply(MSG_PORT_ENABLE_REPLY *msg)
-{
-	mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
-	printf("\tPort:         %d\n", msg->PortNumber);
-}
-
-void
-mpt_print_scsi_io_reply(MSG_SCSI_IO_REPLY *msg)
-{
-	mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
-	printf("\tBus:          %d\n", msg->Bus);
-	printf("\tTargetID      %d\n", msg->TargetID);
-	printf("\tCDBLength     %d\n", msg->CDBLength);
-	printf("\tSCSI Status:  %s\n", mpt_scsi_status(msg->SCSIStatus));
-	printf("\tSCSI State:   %s\n", mpt_scsi_state(msg->SCSIState));
-	printf("\tTransferCnt   0x%04x\n", msg->TransferCount);
-	printf("\tSenseCnt      0x%04x\n", msg->SenseCount);
-	printf("\tResponseInfo  0x%08x\n", msg->ResponseInfo);
-}
-
-
-
-void
-mpt_print_event_notice(MSG_EVENT_NOTIFY_REPLY *msg)
-{
-	mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
-	printf("\tEvent:        %s\n", mpt_ioc_event(msg->Event));
-	printf("\tEventContext  0x%04x\n", msg->EventContext);
-	printf("\tAckRequired     %d\n", msg->AckRequired);
-	printf("\tEventDataLength %d\n", msg->EventDataLength);
-	printf("\tContinuation    %d\n", msg->MsgFlags & 0x80);
-	switch(msg->Event) {
-	case MPI_EVENT_LOG_DATA:
-		printf("\tEvtLogData:   0x%04x\n", msg->Data[0]);
-		break;
-
-	case MPI_EVENT_UNIT_ATTENTION:
-		printf("\tTargetID:     0x%04x\n",
-			msg->Data[0] & 0xff);
-		printf("\tBus:          0x%04x\n",
-			(msg->Data[0] >> 8) & 0xff);
-		break;
-
-	case MPI_EVENT_IOC_BUS_RESET:
-	case MPI_EVENT_EXT_BUS_RESET:
-	case MPI_EVENT_RESCAN:
-		printf("\tPort:           %d\n",
-			(msg->Data[0] >> 8) & 0xff);
-		break;
-
-	case MPI_EVENT_LINK_STATUS_CHANGE:
-		printf("\tLinkState:    %d\n",
-			msg->Data[0] & 0xff);
-		printf("\tPort:         %d\n",
-			(msg->Data[1] >> 8) & 0xff);
-		break;
-
-	case MPI_EVENT_LOOP_STATE_CHANGE:
-		printf("\tType:         %d\n",
-			(msg->Data[0] >> 16) & 0xff);
-		printf("\tChar3:      0x%02x\n",
-			(msg->Data[0] >> 8) & 0xff);
-		printf("\tChar4:      0x%02x\n",
-			(msg->Data[0]     ) & 0xff);
-		printf("\tPort:         %d\n",
-			(msg->Data[1] >> 8) & 0xff);
-		break;
-
-	case MPI_EVENT_LOGOUT:
-		printf("\tN_PortId:   0x%04x\n", msg->Data[0]);
-		printf("\tPort:         %d\n",
-			(msg->Data[1] >> 8) & 0xff);
-		break;
-	}
-
-}
-
-void
-mpt_print_reply(void *vmsg)
-{
-	MSG_DEFAULT_REPLY *msg = vmsg;
-
-	switch (msg->Function) {
-	case MPI_FUNCTION_EVENT_NOTIFICATION:
-		mpt_print_event_notice((MSG_EVENT_NOTIFY_REPLY *)msg);
-		break;
-	case MPI_FUNCTION_PORT_ENABLE:
-		mpt_print_enable_reply((MSG_PORT_ENABLE_REPLY *)msg);
-		break;
-	case MPI_FUNCTION_IOC_FACTS:
-		mpt_print_ioc_facts((MSG_IOC_FACTS_REPLY *)msg);
-		break;
-	case MPI_FUNCTION_IOC_INIT:
-		mpt_print_init_reply((MSG_IOC_INIT_REPLY *)msg);
-		break;
-	case MPI_FUNCTION_SCSI_IO_REQUEST:
-		mpt_print_scsi_io_reply((MSG_SCSI_IO_REPLY *)msg);
-		break;
-	default:
-		mpt_print_reply_hdr((MSG_DEFAULT_REPLY *)msg);
-		break;
-	}
-}
-
-/*****************************************************************************/
-/*  Request functions                                                        */
-/*****************************************************************************/
-void
-mpt_print_request_hdr(MSG_REQUEST_HEADER *req)
-{
-	printf("%s @ %p\n", mpt_ioc_function(req->Function), req);
-	printf("\tChain Offset  0x%02x\n", req->ChainOffset);
-	printf("\tMsgFlags      0x%02x\n", req->MsgFlags);
-	printf("\tMsgContext    0x%08x\n", req->MsgContext);
-}
-
-void
-mpt_print_scsi_io_request(MSG_SCSI_IO_REQUEST *orig_msg)
-{
-	MSG_SCSI_IO_REQUEST local, *msg = &local;
-	int i;
-
-	bcopy(orig_msg, msg, sizeof (MSG_SCSI_IO_REQUEST));
-	mpt_print_request_hdr((MSG_REQUEST_HEADER *)msg);
-	printf("\tBus:                %d\n", msg->Bus);
-	printf("\tTargetID            %d\n", msg->TargetID);
-	printf("\tSenseBufferLength   %d\n", msg->SenseBufferLength);
-	printf("\tLUN:              0x%0x\n", msg->LUN[1]);
-	printf("\tControl           0x%08x ", msg->Control);
-#define MPI_PRINT_FIELD(x)						\
-	case MPI_SCSIIO_CONTROL_ ## x :					\
-		printf(" " #x " ");					\
-		break
-
-	switch (msg->Control & MPI_SCSIIO_CONTROL_DATADIRECTION_MASK) {
-	MPI_PRINT_FIELD(NODATATRANSFER);
-	MPI_PRINT_FIELD(WRITE);
-	MPI_PRINT_FIELD(READ);
-	default:
-		printf(" Invalid DIR! ");
-		break;
-	}
-	switch (msg->Control & MPI_SCSIIO_CONTROL_TASKATTRIBUTE_MASK) {
-	MPI_PRINT_FIELD(SIMPLEQ);
-	MPI_PRINT_FIELD(HEADOFQ);
-	MPI_PRINT_FIELD(ORDEREDQ);
-	MPI_PRINT_FIELD(ACAQ);
-	MPI_PRINT_FIELD(UNTAGGED);
-	MPI_PRINT_FIELD(NO_DISCONNECT);
-	default:
-		printf(" Unknown attribute! ");
-		break;
-	}
-
-	printf("\n");
-#undef MPI_PRINT_FIELD
-
-	printf("\tDataLength\t0x%08x\n", msg->DataLength);
-	printf("\tSenseBufAddr\t0x%08x\n", msg->SenseBufferLowAddr);
-	printf("\tCDB[0:%d]\t", msg->CDBLength);
-	for (i = 0; i < msg->CDBLength; i++)
-		printf("%02x ", msg->CDB[i]);
-	printf("\n");
-	mpt_dump_sgl(&orig_msg->SGL);
-}
-
-void
-mpt_print_request(void *vreq)
-{
-	MSG_REQUEST_HEADER *req = vreq;
-
-	switch (req->Function) {
-	case MPI_FUNCTION_SCSI_IO_REQUEST:
-		mpt_print_scsi_io_request((MSG_SCSI_IO_REQUEST *)req);
-		break;
-	default:
-		mpt_print_request_hdr(req);
-		break;
-	}
-}
-
-char *
-mpt_req_state(enum mpt_req_state state)
-{
-	char *text;
-
-	switch (state) {
-	case REQ_FREE:         text = "Free";         break;
-	case REQ_IN_PROGRESS:  text = "In Progress";  break;
-	case REQ_ON_CHIP:      text = "On Chip";      break;
-	case REQ_TIMEOUT:      text = "Timeout";      break;
-	default: 	       text = "Unknown";      break;
-	}
-	return text;
-};
-
-void
-mpt_dump_sgl(SGE_IO_UNION *su)
-{
-	SGE_SIMPLE32 *se = (SGE_SIMPLE32 *) su;
-	int iCount, flags;
-
-	iCount = MPT_SGL_MAX;
-	do {
-		int iprt;
-
-		printf("\t");
-		flags = MPI_SGE_GET_FLAGS(se->FlagsLength);
-		switch (flags & MPI_SGE_FLAGS_ELEMENT_MASK) {
-		case MPI_SGE_FLAGS_SIMPLE_ELEMENT:
-		{
-			printf("SE32 %p: Addr=0x%0x FlagsLength=0x%0x\n",
-			    se, se->Address, se->FlagsLength);
-			printf(" ");
-			break;
-		}
-		case MPI_SGE_FLAGS_CHAIN_ELEMENT:
-		{
-			SGE_CHAIN32 *ce = (SGE_CHAIN32 *) se;
-			printf("CE32 %p: Addr=0x%0x NxtChnO=0x%x Flgs=0x%x "
-			    "Len=0x%0x\n", ce, ce->Address, ce->NextChainOffset,
-			    ce->Flags, ce->Length);
-			flags = 0;
-			break;
-		}
-		case MPI_SGE_FLAGS_TRANSACTION_ELEMENT:
-			printf("TE32 @ %p\n", se);
-			flags = 0;
-			break;
-		}
-		iprt = 0;
-#define MPT_PRINT_FLAG(x)						\
-		if (flags & MPI_SGE_FLAGS_ ## x ) { 			\
-			if (iprt == 0) {				\
-				printf("\t");				\
-			}						\
-			printf(" ");					\
-			printf( #x );					\
-			iprt++;						\
-		}
-		MPT_PRINT_FLAG(LOCAL_ADDRESS);
-		MPT_PRINT_FLAG(HOST_TO_IOC);
-		MPT_PRINT_FLAG(64_BIT_ADDRESSING);
-		MPT_PRINT_FLAG(LAST_ELEMENT);
-		MPT_PRINT_FLAG(END_OF_BUFFER);
-		MPT_PRINT_FLAG(END_OF_LIST);
-#undef MPT_PRINT_FLAG
-		if (iprt)
-			printf("\n");
-		se++;
-		iCount -= 1;
-	} while ((flags & MPI_SGE_FLAGS_END_OF_LIST) == 0 && iCount != 0);
-}
-#endif /* MPT_DEBUG */
diff --git a/sys/dev/ic/mpt_mpilib.h b/sys/dev/ic/mpt_mpilib.h
deleted file mode 100644
index 15980f09fa8..00000000000
--- a/sys/dev/ic/mpt_mpilib.h
+++ /dev/null
@@ -1,5055 +0,0 @@
-/* $OpenBSD: mpt_mpilib.h,v 1.6 2005/11/16 04:31:32 marco Exp $ */
-
-/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_type.h,v 1.7 2005/07/10 15:05:39 scottl Exp $ */
-/*
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon including
- *    a substantially similar Disclaimer requirement for further binary
- *    redistribution.
- * 3. Neither the name of the LSI Logic Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
- * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- *           Name:  MPI_TYPE.H
- *          Title:  MPI Basic type definitions
- *  Creation Date:  June 6, 2000
- *
- *    MPI Version:  01.02.01
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  05-08-00  00.10.01  Original release for 0.10 spec dated 4/26/2000.
- *  06-06-00  01.00.01  Update version number for 1.0 release.
- *  11-02-00  01.01.01  Original release for post 1.0 work
- *  02-20-01  01.01.02  Added define and ifdef for MPI_POINTER.
- *  08-08-01  01.02.01  Original release for v1.2 work.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI_TYPE_H
-#define MPI_TYPE_H
-
-
-/*******************************************************************************
- * Define MPI_POINTER if it hasn't already been defined. By default MPI_POINTER
- * is defined to be a near pointer. MPI_POINTER can be defined as a far pointer
- * by defining MPI_POINTER as "far *" before this header file is included.
- */
-#ifndef MPI_POINTER
-#define MPI_POINTER     *
-#endif
-
-
-/*****************************************************************************
-*
-*               B a s i c    T y p e s
-*
-*****************************************************************************/
-
-typedef int8_t   S8;
-typedef uint8_t  U8;
-typedef int16_t  S16;
-typedef uint16_t U16;
-typedef int32_t  S32;
-typedef uint32_t U32;
-
-typedef struct _S64
-{
-    U32          Low;
-    S32          High;
-} S64;
-
-typedef struct _U64
-{
-    U32          Low;
-    U32          High;
-} U64;
-
-
-/****************************************************************************/
-/*  Pointers                                                                */
-/****************************************************************************/
-
-typedef S8      *PS8;
-typedef U8      *PU8;
-typedef S16     *PS16;
-typedef U16     *PU16;
-typedef S32     *PS32;
-typedef U32     *PU32;
-typedef S64     *PS64;
-typedef U64     *PU64;
-
-
-#endif
-
-/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/fc_log.h,v 1.5 2005/07/10 15:05:39 scottl Exp $ */
-/*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon including
- *    a substantially similar Disclaimer requirement for further binary
- *    redistribution.
- * 3. Neither the name of the LSI Logic Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
- * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- *  NAME:           fc_log.h
- *  SUMMARY:        MPI IocLogInfo definitions for the SYMFC9xx chips
- *  DESCRIPTION:    Contains the enumerated list of values that may be returned
- *                  in the IOCLogInfo field of a MPI Default Reply Message.
- *
- *  CREATION DATE:  6/02/2000
- *  ID:             $Id: mpt_mpilib.h,v 1.6 2005/11/16 04:31:32 marco Exp $
- */
-
-/*
- * MpiIocLogInfo_t enum
- *
- * These 32 bit values are used in the IOCLogInfo field of the MPI reply
- * messages.
- * The value is 0xabcccccc where
- *          a = The type of log info as per the MPI spec. Since these codes are
- *              all for Fibre Channel this value will always be 2.
- *          b = Specifies a subclass of the firmware where
- *                  0 = FCP Initiator
- *                  1 = FCP Target
- *                  2 = LAN
- *                  3 = MPI Message Layer
- *                  4 = FC Link
- *                  5 = Context Manager
- *                  6 = Invalid Field Offset
- *                  7 = State Change Info
- *                  all others are reserved for future use
- *          c = A specific value within the subclass.
- *
- * NOTE: Any new values should be added to the end of each subclass so that the
- *       codes remain consistent across firmware releases.
- */
-typedef enum _MpiIocLogInfoFc
-{
-    MPI_IOCLOGINFO_FC_INIT_BASE                     = 0x20000000,
-    MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN           = 0x20000004, /* Bad Rx Frame, overrun */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER           = 0x20000005, /* Other errors caught by IOC which require retries */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD       = 0x20000006, /* Main processor could not initialize sub-processor */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OVERRUN         = 0x20000007, /* Scatter Gather overrun  */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_BAD_STATUS      = 0x20000008, /* Receiver detected context mismatch via invalid header */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_RX_UNEXPECTED_FRAME= 0x20000009, /* CtxMgr detected unsupported frame type  */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_LINK_FAILURE       = 0x2000000A, /* Link failure occurred  */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_TX_TIMEOUT         = 0x2000000B, /* Transmitter timeout error */
-
-    MPI_IOCLOGINFO_FC_TARGET_BASE                   = 0x21000000,
-    MPI_IOCLOGINFO_FC_TARGET_NO_PDISC               = 0x21000001, /* not sent because we are waiting for a PDISC from the initiator */
-    MPI_IOCLOGINFO_FC_TARGET_NO_LOGIN               = 0x21000002, /* not sent because we are not logged in to the remote node */
-    MPI_IOCLOGINFO_FC_TARGET_DOAR_KILLED_BY_LIP     = 0x21000003, /* Data Out, Auto Response, not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_DIAR_KILLED_BY_LIP     = 0x21000004, /* Data In, Auto Response, not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_DIAR_MISSING_DATA      = 0x21000005, /* Data In, Auto Response, missing data frames */
-    MPI_IOCLOGINFO_FC_TARGET_DONR_KILLED_BY_LIP     = 0x21000006, /* Data Out, No Response, not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_WRSP_KILLED_BY_LIP     = 0x21000007, /* Auto-response after a write not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_DINR_KILLED_BY_LIP     = 0x21000008, /* Data In, No Response, not completed due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_DINR_MISSING_DATA      = 0x21000009, /* Data In, No Response, missing data frames */
-    MPI_IOCLOGINFO_FC_TARGET_MRSP_KILLED_BY_LIP     = 0x2100000a, /* Manual Response not sent due to a LIP */
-    MPI_IOCLOGINFO_FC_TARGET_NO_CLASS_3             = 0x2100000b, /* not sent because remote node does not support Class 3 */
-    MPI_IOCLOGINFO_FC_TARGET_LOGIN_NOT_VALID        = 0x2100000c, /* not sent because login to remote node not validated */
-    MPI_IOCLOGINFO_FC_TARGET_FROM_OUTBOUND          = 0x2100000e, /* cleared from the outbound queue after a logout */
-    MPI_IOCLOGINFO_FC_TARGET_WAITING_FOR_DATA_IN    = 0x2100000f, /* cleared waiting for data after a logout */
-
-    MPI_IOCLOGINFO_FC_LAN_BASE                      = 0x22000000,
-    MPI_IOCLOGINFO_FC_LAN_TRANS_SGL_MISSING         = 0x22000001, /* Transaction Context Sgl Missing */
-    MPI_IOCLOGINFO_FC_LAN_TRANS_WRONG_PLACE         = 0x22000002, /* Transaction Context found before an EOB */
-    MPI_IOCLOGINFO_FC_LAN_TRANS_RES_BITS_SET        = 0x22000003, /* Transaction Context value has reserved bits set */
-    MPI_IOCLOGINFO_FC_LAN_WRONG_SGL_FLAG            = 0x22000004, /* Invalid SGL Flags */
-
-    MPI_IOCLOGINFO_FC_MSG_BASE                      = 0x23000000,
-
-    MPI_IOCLOGINFO_FC_LINK_BASE                     = 0x24000000,
-    MPI_IOCLOGINFO_FC_LINK_LOOP_INIT_TIMEOUT        = 0x24000001, /* Loop initialization timed out */
-    MPI_IOCLOGINFO_FC_LINK_ALREADY_INITIALIZED      = 0x24000002, /* Another system controller already initialized the loop */
-    MPI_IOCLOGINFO_FC_LINK_LINK_NOT_ESTABLISHED     = 0x24000003, /* Not synchronized to signal or still negotiating (possible cable problem) */
-    MPI_IOCLOGINFO_FC_LINK_CRC_ERROR                = 0x24000004, /* CRC check detected error on received frame */
-
-    MPI_IOCLOGINFO_FC_CTX_BASE                      = 0x25000000,
-
-    MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET     = 0x26000000, /* The lower 24 bits give the byte offset of the field in the request message that is invalid */
-    MPI_IOCLOGINFO_FC_INVALID_FIELD_MAX_OFFSET      = 0x26ffffff,
-
-    MPI_IOCLOGINFO_FC_STATE_CHANGE                  = 0x27000000  /* The lower 24 bits give additional information concerning state change */
-
-} MpiIocLogInfoFc_t;
-/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi.h,v 1.6 2005/07/10 15:05:39 scottl Exp $ */
-/*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon including
- *    a substantially similar Disclaimer requirement for further binary
- *    redistribution.
- * 3. Neither the name of the LSI Logic Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
- * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- *           Name:  MPI.H
- *          Title:  MPI Message independent structures and definitions
- *  Creation Date:  July 27, 2000
- *
- *    MPI.H Version:  01.02.11
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  05-08-00  00.10.01  Original release for 0.10 spec dated 4/26/2000.
- *  05-24-00  00.10.02  Added MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH definition.
- *  06-06-00  01.00.01  Update MPI_VERSION_MAJOR and MPI_VERSION_MINOR.
- *  06-22-00  01.00.02  Added MPI_IOCSTATUS_LAN_ definitions.
- *                      Removed LAN_SUSPEND function definition.
- *                      Added MPI_MSGFLAGS_CONTINUATION_REPLY definition.
- *  06-30-00  01.00.03  Added MPI_CONTEXT_REPLY_TYPE_LAN definition.
- *                      Added MPI_GET/SET_CONTEXT_REPLY_TYPE macros.
- *  07-27-00  01.00.04  Added MPI_FAULT_ definitions.
- *                      Removed MPI_IOCSTATUS_MSG/DATA_XFER_ERROR definitions.
- *                      Added MPI_IOCSTATUS_INTERNAL_ERROR definition.
- *                      Added MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH.
- *  11-02-00  01.01.01  Original release for post 1.0 work.
- *  12-04-00  01.01.02  Added new function codes.
- *  01-09-01  01.01.03  Added more definitions to the system interface section
- *                      Added MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT.
- *  01-25-01  01.01.04  Changed MPI_VERSION_MINOR from 0x00 to 0x01.
- *  02-20-01  01.01.05  Started using MPI_POINTER.
- *                      Fixed value for MPI_DIAG_RW_ENABLE.
- *                      Added defines for MPI_DIAG_PREVENT_IOC_BOOT and
- *                      MPI_DIAG_CLEAR_FLASH_BAD_SIG.
- *                      Obsoleted MPI_IOCSTATUS_TARGET_FC_ defines.
- *  02-27-01  01.01.06  Removed MPI_HOST_INDEX_REGISTER define.
- *                      Added function codes for RAID.
- *  04-09-01  01.01.07  Added alternate define for MPI_DOORBELL_ACTIVE,
- *                      MPI_DOORBELL_USED, to better match the spec.
- *  08-08-01  01.02.01  Original release for v1.2 work.
- *                      Changed MPI_VERSION_MINOR from 0x01 to 0x02.
- *                      Added define MPI_FUNCTION_TOOLBOX.
- *  09-28-01  01.02.02  New function code MPI_SCSI_ENCLOSURE_PROCESSOR.
- *  11-01-01  01.02.03  Changed name to MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR.
- *  03-14-02  01.02.04  Added MPI_HEADER_VERSION_ defines.
- *  05-31-02  01.02.05  Bumped MPI_HEADER_VERSION_UNIT.
- *  07-12-02  01.02.06  Added define for MPI_FUNCTION_MAILBOX.
- *  09-16-02  01.02.07  Bumped value for MPI_HEADER_VERSION_UNIT.
- *  11-15-02  01.02.08  Added define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX and
- *                      obsoleted define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX.
- *  04-01-03  01.02.09  New IOCStatus code: MPI_IOCSTATUS_FC_EXCHANGE_CANCELED
- *  06-26-03  01.02.10  Bumped MPI_HEADER_VERSION_UNIT value.
- *  01-16-04  01.02.11  Added define for MPI_IOCLOGINFO_TYPE_SHIFT.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI_H
-#define MPI_H
-
-
-/*****************************************************************************
-*
-*        M P I    V e r s i o n    D e f i n i t i o n s
-*
-*****************************************************************************/
-
-#define MPI_VERSION_MAJOR                   (0x01)
-#define MPI_VERSION_MINOR                   (0x02)
-#define MPI_VERSION_MAJOR_MASK              (0xFF00)
-#define MPI_VERSION_MAJOR_SHIFT             (8)
-#define MPI_VERSION_MINOR_MASK              (0x00FF)
-#define MPI_VERSION_MINOR_SHIFT             (0)
-#define MPI_VERSION ((MPI_VERSION_MAJOR << MPI_VERSION_MAJOR_SHIFT) |   \
-                                      MPI_VERSION_MINOR)
-
-#define MPI_VERSION_01_00                   (0x0100)
-#define MPI_VERSION_01_01                   (0x0101)
-#define MPI_VERSION_01_02                   (0x0102)
-/* Note: The major versions of 0xe0 through 0xff are reserved */
-
-/* versioning for this MPI header set */
-#define MPI_HEADER_VERSION_UNIT             (0x0D)
-#define MPI_HEADER_VERSION_DEV              (0x00)
-#define MPI_HEADER_VERSION_UNIT_MASK        (0xFF00)
-#define MPI_HEADER_VERSION_UNIT_SHIFT       (8)
-#define MPI_HEADER_VERSION_DEV_MASK         (0x00FF)
-#define MPI_HEADER_VERSION_DEV_SHIFT        (0)
-#define MPI_HEADER_VERSION ((MPI_HEADER_VERSION_UNIT << 8) | MPI_HEADER_VERSION_DEV)
-
-/*****************************************************************************
-*
-*        I O C    S t a t e    D e f i n i t i o n s
-*
-*****************************************************************************/
-
-#define MPI_IOC_STATE_RESET                 (0x00000000)
-#define MPI_IOC_STATE_READY                 (0x10000000)
-#define MPI_IOC_STATE_OPERATIONAL           (0x20000000)
-#define MPI_IOC_STATE_FAULT                 (0x40000000)
-
-#define MPI_IOC_STATE_MASK                  (0xF0000000)
-#define MPI_IOC_STATE_SHIFT                 (28)
-
-/* Fault state codes (product independent range 0x8000-0xFFFF) */
-
-#define MPI_FAULT_REQUEST_MESSAGE_PCI_PARITY_ERROR  (0x8111)
-#define MPI_FAULT_REQUEST_MESSAGE_PCI_BUS_FAULT     (0x8112)
-#define MPI_FAULT_REPLY_MESSAGE_PCI_PARITY_ERROR    (0x8113)
-#define MPI_FAULT_REPLY_MESSAGE_PCI_BUS_FAULT       (0x8114)
-#define MPI_FAULT_DATA_SEND_PCI_PARITY_ERROR        (0x8115)
-#define MPI_FAULT_DATA_SEND_PCI_BUS_FAULT           (0x8116)
-#define MPI_FAULT_DATA_RECEIVE_PCI_PARITY_ERROR     (0x8117)
-#define MPI_FAULT_DATA_RECEIVE_PCI_BUS_FAULT        (0x8118)
-
-
-/*****************************************************************************
-*
-*        P C I    S y s t e m    I n t e r f a c e    R e g i s t e r s
-*
-*****************************************************************************/
-
-/* S y s t e m    D o o r b e l l */
-#define MPI_DOORBELL_OFFSET                 (0x00000000)
-#define MPI_DOORBELL_ACTIVE                 (0x08000000) /* DoorbellUsed */
-#define MPI_DOORBELL_USED                   (MPI_DOORBELL_ACTIVE)
-#define MPI_DOORBELL_ACTIVE_SHIFT           (27)
-#define MPI_DOORBELL_WHO_INIT_MASK          (0x07000000)
-#define MPI_DOORBELL_WHO_INIT_SHIFT         (24)
-#define MPI_DOORBELL_FUNCTION_MASK          (0xFF000000)
-#define MPI_DOORBELL_FUNCTION_SHIFT         (24)
-#define MPI_DOORBELL_ADD_DWORDS_MASK        (0x00FF0000)
-#define MPI_DOORBELL_ADD_DWORDS_SHIFT       (16)
-#define MPI_DOORBELL_DATA_MASK              (0x0000FFFF)
-
-
-#define MPI_WRITE_SEQUENCE_OFFSET           (0x00000004)
-#define MPI_WRSEQ_KEY_VALUE_MASK            (0x0000000F)
-#define MPI_WRSEQ_1ST_KEY_VALUE             (0x04)
-#define MPI_WRSEQ_2ND_KEY_VALUE             (0x0B)
-#define MPI_WRSEQ_3RD_KEY_VALUE             (0x02)
-#define MPI_WRSEQ_4TH_KEY_VALUE             (0x07)
-#define MPI_WRSEQ_5TH_KEY_VALUE             (0x0D)
-
-#define MPI_DIAGNOSTIC_OFFSET               (0x00000008)
-#define MPI_DIAG_CLEAR_FLASH_BAD_SIG        (0x00000400)
-#define MPI_DIAG_PREVENT_IOC_BOOT           (0x00000200)
-#define MPI_DIAG_DRWE                       (0x00000080)
-#define MPI_DIAG_FLASH_BAD_SIG              (0x00000040)
-#define MPI_DIAG_RESET_HISTORY              (0x00000020)
-#define MPI_DIAG_RW_ENABLE                  (0x00000010)
-#define MPI_DIAG_RESET_ADAPTER              (0x00000004)
-#define MPI_DIAG_DISABLE_ARM                (0x00000002)
-#define MPI_DIAG_MEM_ENABLE                 (0x00000001)
-
-#define MPI_TEST_BASE_ADDRESS_OFFSET        (0x0000000C)
-
-#define MPI_DIAG_RW_DATA_OFFSET             (0x00000010)
-
-#define MPI_DIAG_RW_ADDRESS_OFFSET          (0x00000014)
-
-#define MPI_HOST_INTERRUPT_STATUS_OFFSET    (0x00000030)
-#define MPI_HIS_IOP_DOORBELL_STATUS         (0x80000000)
-#define MPI_HIS_REPLY_MESSAGE_INTERRUPT     (0x00000008)
-#define MPI_HIS_DOORBELL_INTERRUPT          (0x00000001)
-
-#define MPI_HOST_INTERRUPT_MASK_OFFSET      (0x00000034)
-#define MPI_HIM_RIM                         (0x00000008)
-#define MPI_HIM_DIM                         (0x00000001)
-
-#define MPI_REQUEST_QUEUE_OFFSET            (0x00000040)
-#define MPI_REQUEST_POST_FIFO_OFFSET        (0x00000040)
-
-#define MPI_REPLY_QUEUE_OFFSET              (0x00000044)
-#define MPI_REPLY_POST_FIFO_OFFSET          (0x00000044)
-#define MPI_REPLY_FREE_FIFO_OFFSET          (0x00000044)
-
-
-
-/*****************************************************************************
-*
-*        M e s s a g e    F r a m e    D e s c r i p t o r s
-*
-*****************************************************************************/
-
-#define MPI_REQ_MF_DESCRIPTOR_NB_MASK       (0x00000003)
-#define MPI_REQ_MF_DESCRIPTOR_F_BIT         (0x00000004)
-#define MPI_REQ_MF_DESCRIPTOR_ADDRESS_MASK  (0xFFFFFFF8)
-
-#define MPI_ADDRESS_REPLY_A_BIT             (0x80000000)
-#define MPI_ADDRESS_REPLY_ADDRESS_MASK      (0x7FFFFFFF)
-
-#define MPI_CONTEXT_REPLY_A_BIT             (0x80000000)
-#define MPI_CONTEXT_REPLY_TYPE_MASK         (0x60000000)
-#define MPI_CONTEXT_REPLY_TYPE_SCSI_INIT    (0x00)
-#define MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET  (0x01)
-#define MPI_CONTEXT_REPLY_TYPE_LAN          (0x02)
-#define MPI_CONTEXT_REPLY_TYPE_SHIFT        (29)
-#define MPI_CONTEXT_REPLY_CONTEXT_MASK      (0x1FFFFFFF)
-
-
-/****************************************************************************/
-/* Context Reply macros                                                     */
-/****************************************************************************/
-
-#define MPI_GET_CONTEXT_REPLY_TYPE(x)  (((x) & MPI_CONTEXT_REPLY_TYPE_MASK) \
-                                          >> MPI_CONTEXT_REPLY_TYPE_SHIFT)
-
-#define MPI_SET_CONTEXT_REPLY_TYPE(x, typ)                                  \
-            ((x) = ((x) & ~MPI_CONTEXT_REPLY_TYPE_MASK) |                   \
-                            (((typ) << MPI_CONTEXT_REPLY_TYPE_SHIFT) &      \
-                                        MPI_CONTEXT_REPLY_TYPE_MASK))
-
-
-/*****************************************************************************
-*
-*        M e s s a g e    F u n c t i o n s
-*              0x80 -> 0x8F reserved for private message use per product
-*
-*
-*****************************************************************************/
-
-#define MPI_FUNCTION_SCSI_IO_REQUEST                (0x00)
-#define MPI_FUNCTION_SCSI_TASK_MGMT                 (0x01)
-#define MPI_FUNCTION_IOC_INIT                       (0x02)
-#define MPI_FUNCTION_IOC_FACTS                      (0x03)
-#define MPI_FUNCTION_CONFIG                         (0x04)
-#define MPI_FUNCTION_PORT_FACTS                     (0x05)
-#define MPI_FUNCTION_PORT_ENABLE                    (0x06)
-#define MPI_FUNCTION_EVENT_NOTIFICATION             (0x07)
-#define MPI_FUNCTION_EVENT_ACK                      (0x08)
-#define MPI_FUNCTION_FW_DOWNLOAD                    (0x09)
-#define MPI_FUNCTION_TARGET_CMD_BUFFER_POST         (0x0A)
-#define MPI_FUNCTION_TARGET_ASSIST                  (0x0B)
-#define MPI_FUNCTION_TARGET_STATUS_SEND             (0x0C)
-#define MPI_FUNCTION_TARGET_MODE_ABORT              (0x0D)
-#define MPI_FUNCTION_TARGET_FC_BUF_POST_LINK_SRVC   (0x0E) /* obsolete name */
-#define MPI_FUNCTION_TARGET_FC_RSP_LINK_SRVC        (0x0F) /* obsolete name */
-#define MPI_FUNCTION_TARGET_FC_EX_SEND_LINK_SRVC    (0x10) /* obsolete name */
-#define MPI_FUNCTION_TARGET_FC_ABORT                (0x11) /* obsolete name */
-#define MPI_FUNCTION_FC_LINK_SRVC_BUF_POST          (0x0E)
-#define MPI_FUNCTION_FC_LINK_SRVC_RSP               (0x0F)
-#define MPI_FUNCTION_FC_EX_LINK_SRVC_SEND           (0x10)
-#define MPI_FUNCTION_FC_ABORT                       (0x11)
-#define MPI_FUNCTION_FW_UPLOAD                      (0x12)
-#define MPI_FUNCTION_FC_COMMON_TRANSPORT_SEND       (0x13)
-#define MPI_FUNCTION_FC_PRIMITIVE_SEND              (0x14)
-
-#define MPI_FUNCTION_RAID_ACTION                    (0x15)
-#define MPI_FUNCTION_RAID_SCSI_IO_PASSTHROUGH       (0x16)
-
-#define MPI_FUNCTION_TOOLBOX                        (0x17)
-
-#define MPI_FUNCTION_SCSI_ENCLOSURE_PROCESSOR       (0x18)
-
-#define MPI_FUNCTION_MAILBOX                        (0x19)
-
-#define MPI_FUNCTION_LAN_SEND                       (0x20)
-#define MPI_FUNCTION_LAN_RECEIVE                    (0x21)
-#define MPI_FUNCTION_LAN_RESET                      (0x22)
-
-#define MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET         (0x40)
-#define MPI_FUNCTION_IO_UNIT_RESET                  (0x41)
-#define MPI_FUNCTION_HANDSHAKE                      (0x42)
-#define MPI_FUNCTION_REPLY_FRAME_REMOVAL            (0x43)
-
-
-
-/*****************************************************************************
-*
-*        S c a t t e r    G a t h e r    E l e m e n t s
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/*  Simple element structures                                               */
-/****************************************************************************/
-
-typedef struct _SGE_SIMPLE32
-{
-    U32                     FlagsLength;
-    U32                     Address;
-} SGE_SIMPLE32, MPI_POINTER PTR_SGE_SIMPLE32,
-  SGESimple32_t, MPI_POINTER pSGESimple32_t;
-
-typedef struct _SGE_SIMPLE64
-{
-    U32                     FlagsLength;
-    U64                     Address;
-} SGE_SIMPLE64, MPI_POINTER PTR_SGE_SIMPLE64,
-  SGESimple64_t, MPI_POINTER pSGESimple64_t;
-
-typedef struct _SGE_SIMPLE_UNION
-{
-    U32                     FlagsLength;
-    union
-    {
-        U32                 Address32;
-        U64                 Address64;
-    }u;
-} SGESimpleUnion_t, MPI_POINTER pSGESimpleUnion_t,
-  SGE_SIMPLE_UNION, MPI_POINTER PTR_SGE_SIMPLE_UNION;
-
-/****************************************************************************/
-/*  Chain element structures                                                */
-/****************************************************************************/
-
-typedef struct _SGE_CHAIN32
-{
-    U16                     Length;
-    U8                      NextChainOffset;
-    U8                      Flags;
-    U32                     Address;
-} SGE_CHAIN32, MPI_POINTER PTR_SGE_CHAIN32,
-  SGEChain32_t, MPI_POINTER pSGEChain32_t;
-
-typedef struct _SGE_CHAIN64
-{
-    U16                     Length;
-    U8                      NextChainOffset;
-    U8                      Flags;
-    U64                     Address;
-} SGE_CHAIN64, MPI_POINTER PTR_SGE_CHAIN64,
-  SGEChain64_t, MPI_POINTER pSGEChain64_t;
-
-typedef struct _SGE_CHAIN_UNION
-{
-    U16                     Length;
-    U8                      NextChainOffset;
-    U8                      Flags;
-    union
-    {
-        U32                 Address32;
-        U64                 Address64;
-    }u;
-} SGE_CHAIN_UNION, MPI_POINTER PTR_SGE_CHAIN_UNION,
-  SGEChainUnion_t, MPI_POINTER pSGEChainUnion_t;
-
-/****************************************************************************/
-/*  Transaction Context element                                             */
-/****************************************************************************/
-
-typedef struct _SGE_TRANSACTION32
-{
-    U8                      Reserved;
-    U8                      ContextSize;
-    U8                      DetailsLength;
-    U8                      Flags;
-    U32                     TransactionContext[1];
-    U32                     TransactionDetails[1];
-} SGE_TRANSACTION32, MPI_POINTER PTR_SGE_TRANSACTION32,
-  SGETransaction32_t, MPI_POINTER pSGETransaction32_t;
-
-typedef struct _SGE_TRANSACTION64
-{
-    U8                      Reserved;
-    U8                      ContextSize;
-    U8                      DetailsLength;
-    U8                      Flags;
-    U32                     TransactionContext[2];
-    U32                     TransactionDetails[1];
-} SGE_TRANSACTION64, MPI_POINTER PTR_SGE_TRANSACTION64,
-  SGETransaction64_t, MPI_POINTER pSGETransaction64_t;
-
-typedef struct _SGE_TRANSACTION96
-{
-    U8                      Reserved;
-    U8                      ContextSize;
-    U8                      DetailsLength;
-    U8                      Flags;
-    U32                     TransactionContext[3];
-    U32                     TransactionDetails[1];
-} SGE_TRANSACTION96, MPI_POINTER PTR_SGE_TRANSACTION96,
-  SGETransaction96_t, MPI_POINTER pSGETransaction96_t;
-
-typedef struct _SGE_TRANSACTION128
-{
-    U8                      Reserved;
-    U8                      ContextSize;
-    U8                      DetailsLength;
-    U8                      Flags;
-    U32                     TransactionContext[4];
-    U32                     TransactionDetails[1];
-} SGE_TRANSACTION128, MPI_POINTER PTR_SGE_TRANSACTION128,
-  SGETransaction_t128, MPI_POINTER pSGETransaction_t128;
-
-typedef struct _SGE_TRANSACTION_UNION
-{
-    U8                      Reserved;
-    U8                      ContextSize;
-    U8                      DetailsLength;
-    U8                      Flags;
-    union
-    {
-        U32                 TransactionContext32[1];
-        U32                 TransactionContext64[2];
-        U32                 TransactionContext96[3];
-        U32                 TransactionContext128[4];
-    }u;
-    U32                     TransactionDetails[1];
-} SGE_TRANSACTION_UNION, MPI_POINTER PTR_SGE_TRANSACTION_UNION,
-  SGETransactionUnion_t, MPI_POINTER pSGETransactionUnion_t;
-
-
-/****************************************************************************/
-/*  SGE IO types union  for IO SGL's                                        */
-/****************************************************************************/
-
-typedef struct _SGE_IO_UNION
-{
-    union
-    {
-        SGE_SIMPLE_UNION    Simple;
-        SGE_CHAIN_UNION     Chain;
-    } u;
-} SGE_IO_UNION, MPI_POINTER PTR_SGE_IO_UNION,
-  SGEIOUnion_t, MPI_POINTER pSGEIOUnion_t;
-
-/****************************************************************************/
-/*  SGE union for SGL's with Simple and Transaction elements                */
-/****************************************************************************/
-
-typedef struct _SGE_TRANS_SIMPLE_UNION
-{
-    union
-    {
-        SGE_SIMPLE_UNION        Simple;
-        SGE_TRANSACTION_UNION   Transaction;
-    } u;
-} SGE_TRANS_SIMPLE_UNION, MPI_POINTER PTR_SGE_TRANS_SIMPLE_UNION,
-  SGETransSimpleUnion_t, MPI_POINTER pSGETransSimpleUnion_t;
-
-/****************************************************************************/
-/*  All SGE types union                                                     */
-/****************************************************************************/
-
-typedef struct _SGE_MPI_UNION
-{
-    union
-    {
-        SGE_SIMPLE_UNION        Simple;
-        SGE_CHAIN_UNION         Chain;
-        SGE_TRANSACTION_UNION   Transaction;
-    } u;
-} SGE_MPI_UNION, MPI_POINTER PTR_SGE_MPI_UNION,
-  MPI_SGE_UNION_t, MPI_POINTER pMPI_SGE_UNION_t,
-  SGEAllUnion_t, MPI_POINTER pSGEAllUnion_t;
-
-
-/****************************************************************************/
-/*  SGE field definition and masks                                          */
-/****************************************************************************/
-
-/* Flags field bit definitions */
-
-#define MPI_SGE_FLAGS_LAST_ELEMENT              (0x80)
-#define MPI_SGE_FLAGS_END_OF_BUFFER             (0x40)
-#define MPI_SGE_FLAGS_ELEMENT_TYPE_MASK         (0x30)
-#define MPI_SGE_FLAGS_LOCAL_ADDRESS             (0x08)
-#define MPI_SGE_FLAGS_DIRECTION                 (0x04)
-#define MPI_SGE_FLAGS_ADDRESS_SIZE              (0x02)
-#define MPI_SGE_FLAGS_END_OF_LIST               (0x01)
-
-#define MPI_SGE_FLAGS_SHIFT                     (24)
-
-#define MPI_SGE_LENGTH_MASK                     (0x00FFFFFF)
-#define MPI_SGE_CHAIN_LENGTH_MASK               (0x0000FFFF)
-
-/* Element Type */
-
-#define MPI_SGE_FLAGS_TRANSACTION_ELEMENT       (0x00)
-#define MPI_SGE_FLAGS_SIMPLE_ELEMENT            (0x10)
-#define MPI_SGE_FLAGS_CHAIN_ELEMENT             (0x30)
-#define MPI_SGE_FLAGS_ELEMENT_MASK              (0x30)
-
-/* Address location */
-
-#define MPI_SGE_FLAGS_SYSTEM_ADDRESS            (0x00)
-
-/* Direction */
-
-#define MPI_SGE_FLAGS_IOC_TO_HOST               (0x00)
-#define MPI_SGE_FLAGS_HOST_TO_IOC               (0x04)
-
-/* Address Size */
-
-#define MPI_SGE_FLAGS_32_BIT_ADDRESSING         (0x00)
-#define MPI_SGE_FLAGS_64_BIT_ADDRESSING         (0x02)
-
-/* Context Size */
-
-#define MPI_SGE_FLAGS_32_BIT_CONTEXT            (0x00)
-#define MPI_SGE_FLAGS_64_BIT_CONTEXT            (0x02)
-#define MPI_SGE_FLAGS_96_BIT_CONTEXT            (0x04)
-#define MPI_SGE_FLAGS_128_BIT_CONTEXT           (0x06)
-
-#define MPI_SGE_CHAIN_OFFSET_MASK               (0x00FF0000)
-#define MPI_SGE_CHAIN_OFFSET_SHIFT              (16)
-
-
-/****************************************************************************/
-/*  SGE operation Macros                                                    */
-/****************************************************************************/
-
-         /* SIMPLE FlagsLength manipulations... */
-#define  MPI_SGE_SET_FLAGS(f)           ((U32)(f) << MPI_SGE_FLAGS_SHIFT)
-#define  MPI_SGE_GET_FLAGS(fl)          (((fl) & ~MPI_SGE_LENGTH_MASK) >> MPI_SGE_FLAGS_SHIFT)
-#define  MPI_SGE_LENGTH(fl)             ((fl) & MPI_SGE_LENGTH_MASK)
-#define  MPI_SGE_CHAIN_LENGTH(fl)       ((fl) & MPI_SGE_CHAIN_LENGTH_MASK)
-
-#define  MPI_SGE_SET_FLAGS_LENGTH(f,l)  (MPI_SGE_SET_FLAGS(f) | MPI_SGE_LENGTH(l))
-
-#define  MPI_pSGE_GET_FLAGS(psg)        MPI_SGE_GET_FLAGS((psg)->FlagsLength)
-#define  MPI_pSGE_GET_LENGTH(psg)       MPI_SGE_LENGTH((psg)->FlagsLength)
-#define  MPI_pSGE_SET_FLAGS_LENGTH(psg,f,l)  (psg)->FlagsLength = MPI_SGE_SET_FLAGS_LENGTH(f,l)
-         /* CAUTION - The following are READ-MODIFY-WRITE! */
-#define  MPI_pSGE_SET_FLAGS(psg,f)      (psg)->FlagsLength |= MPI_SGE_SET_FLAGS(f)
-#define  MPI_pSGE_SET_LENGTH(psg,l)     (psg)->FlagsLength |= MPI_SGE_LENGTH(l)
-
-#define  MPI_GET_CHAIN_OFFSET(x) ((x&MPI_SGE_CHAIN_OFFSET_MASK)>>MPI_SGE_CHAIN_OFFSET_SHIFT)
-
-
-
-/*****************************************************************************
-*
-*        S t a n d a r d    M e s s a g e    S t r u c t u r e s
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/* Standard message request header for all request messages                 */
-/****************************************************************************/
-
-typedef struct _MSG_REQUEST_HEADER
-{
-    U8                      Reserved[2];      /* function specific */
-    U8                      ChainOffset;
-    U8                      Function;
-    U8                      Reserved1[3];     /* function specific */
-    U8                      MsgFlags;
-    U32                     MsgContext;
-} MSG_REQUEST_HEADER, MPI_POINTER PTR_MSG_REQUEST_HEADER,
-  MPIHeader_t, MPI_POINTER pMPIHeader_t;
-
-
-/****************************************************************************/
-/*  Default Reply                                                           */
-/****************************************************************************/
-
-typedef struct _MSG_DEFAULT_REPLY
-{
-    U8                      Reserved[2];      /* function specific */
-    U8                      MsgLength;
-    U8                      Function;
-    U8                      Reserved1[3];     /* function specific */
-    U8                      MsgFlags;
-    U32                     MsgContext;
-    U8                      Reserved2[2];     /* function specific */
-    U16                     IOCStatus;
-    U32                     IOCLogInfo;
-} MSG_DEFAULT_REPLY, MPI_POINTER PTR_MSG_DEFAULT_REPLY,
-  MPIDefaultReply_t, MPI_POINTER pMPIDefaultReply_t;
-
-
-/* MsgFlags definition for all replies */
-
-#define MPI_MSGFLAGS_CONTINUATION_REPLY         (0x80)
-
-
-/*****************************************************************************
-*
-*               I O C    S t a t u s   V a l u e s
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/*  Common IOCStatus values for all replies                                 */
-/****************************************************************************/
-
-#define MPI_IOCSTATUS_SUCCESS                  (0x0000)
-#define MPI_IOCSTATUS_INVALID_FUNCTION         (0x0001)
-#define MPI_IOCSTATUS_BUSY                     (0x0002)
-#define MPI_IOCSTATUS_INVALID_SGL              (0x0003)
-#define MPI_IOCSTATUS_INTERNAL_ERROR           (0x0004)
-#define MPI_IOCSTATUS_RESERVED                 (0x0005)
-#define MPI_IOCSTATUS_INSUFFICIENT_RESOURCES   (0x0006)
-#define MPI_IOCSTATUS_INVALID_FIELD            (0x0007)
-#define MPI_IOCSTATUS_INVALID_STATE            (0x0008)
-
-/****************************************************************************/
-/*  Config IOCStatus values                                                 */
-/****************************************************************************/
-
-#define MPI_IOCSTATUS_CONFIG_INVALID_ACTION    (0x0020)
-#define MPI_IOCSTATUS_CONFIG_INVALID_TYPE      (0x0021)
-#define MPI_IOCSTATUS_CONFIG_INVALID_PAGE      (0x0022)
-#define MPI_IOCSTATUS_CONFIG_INVALID_DATA      (0x0023)
-#define MPI_IOCSTATUS_CONFIG_NO_DEFAULTS       (0x0024)
-#define MPI_IOCSTATUS_CONFIG_CANT_COMMIT       (0x0025)
-
-/****************************************************************************/
-/*  SCSIIO Reply (SPI & FCP) initiator values                               */
-/****************************************************************************/
-
-#define MPI_IOCSTATUS_SCSI_RECOVERED_ERROR     (0x0040)
-#define MPI_IOCSTATUS_SCSI_INVALID_BUS         (0x0041)
-#define MPI_IOCSTATUS_SCSI_INVALID_TARGETID    (0x0042)
-#define MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE    (0x0043)
-#define MPI_IOCSTATUS_SCSI_DATA_OVERRUN        (0x0044)
-#define MPI_IOCSTATUS_SCSI_DATA_UNDERRUN       (0x0045)
-#define MPI_IOCSTATUS_SCSI_IO_DATA_ERROR       (0x0046)
-#define MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR      (0x0047)
-#define MPI_IOCSTATUS_SCSI_TASK_TERMINATED     (0x0048)
-#define MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH   (0x0049)
-#define MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED    (0x004A)
-#define MPI_IOCSTATUS_SCSI_IOC_TERMINATED      (0x004B)
-#define MPI_IOCSTATUS_SCSI_EXT_TERMINATED      (0x004C)
-
-/****************************************************************************/
-/*  SCSI (SPI & FCP) target values                                          */
-/****************************************************************************/
-
-#define MPI_IOCSTATUS_TARGET_PRIORITY_IO         (0x0060)
-#define MPI_IOCSTATUS_TARGET_INVALID_PORT        (0x0061)
-#define MPI_IOCSTATUS_TARGET_INVALID_IOCINDEX    (0x0062)   /* obsolete */
-#define MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX    (0x0062)
-#define MPI_IOCSTATUS_TARGET_ABORTED             (0x0063)
-#define MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE   (0x0064)
-#define MPI_IOCSTATUS_TARGET_NO_CONNECTION       (0x0065)
-#define MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006A)
-#define MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT   (0x006B)
-
-/****************************************************************************/
-/*  Additional FCP target values                                            */
-/****************************************************************************/
-
-#define MPI_IOCSTATUS_TARGET_FC_ABORTED         (0x0066)    /* obsolete */
-#define MPI_IOCSTATUS_TARGET_FC_RX_ID_INVALID   (0x0067)    /* obsolete */
-#define MPI_IOCSTATUS_TARGET_FC_DID_INVALID     (0x0068)    /* obsolete */
-#define MPI_IOCSTATUS_TARGET_FC_NODE_LOGGED_OUT (0x0069)    /* obsolete */
-
-/****************************************************************************/
-/*  Fibre Channel Direct Access values                                      */
-/****************************************************************************/
-
-#define MPI_IOCSTATUS_FC_ABORTED                (0x0066)
-#define MPI_IOCSTATUS_FC_RX_ID_INVALID          (0x0067)
-#define MPI_IOCSTATUS_FC_DID_INVALID            (0x0068)
-#define MPI_IOCSTATUS_FC_NODE_LOGGED_OUT        (0x0069)
-#define MPI_IOCSTATUS_FC_EXCHANGE_CANCELED      (0x006C)
-
-/****************************************************************************/
-/*  LAN values                                                              */
-/****************************************************************************/
-
-#define MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND      (0x0080)
-#define MPI_IOCSTATUS_LAN_DEVICE_FAILURE        (0x0081)
-#define MPI_IOCSTATUS_LAN_TRANSMIT_ERROR        (0x0082)
-#define MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED      (0x0083)
-#define MPI_IOCSTATUS_LAN_RECEIVE_ERROR         (0x0084)
-#define MPI_IOCSTATUS_LAN_RECEIVE_ABORTED       (0x0085)
-#define MPI_IOCSTATUS_LAN_PARTIAL_PACKET        (0x0086)
-#define MPI_IOCSTATUS_LAN_CANCELED              (0x0087)
-
-
-/****************************************************************************/
-/*  IOCStatus flag to indicate that log info is available                   */
-/****************************************************************************/
-
-#define MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE   (0x8000)
-#define MPI_IOCSTATUS_MASK                      (0x7FFF)
-
-/****************************************************************************/
-/*  LogInfo Types                                                           */
-/****************************************************************************/
-
-#define MPI_IOCLOGINFO_TYPE_MASK                (0xF0000000)
-#define MPI_IOCLOGINFO_TYPE_SHIFT               (28)
-#define MPI_IOCLOGINFO_TYPE_NONE                (0x0)
-#define MPI_IOCLOGINFO_TYPE_SCSI                (0x1)
-#define MPI_IOCLOGINFO_TYPE_FC                  (0x2)
-#define MPI_IOCLOGINFO_LOG_DATA_MASK            (0x0FFFFFFF)
-
-
-#endif
-/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_cnfg.h,v 1.6 2005/07/10 15:05:39 scottl Exp $ */
-/*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon including
- *    a substantially similar Disclaimer requirement for further binary
- *    redistribution.
- * 3. Neither the name of the LSI Logic Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
- * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- *           Name:  MPI_CNFG.H
- *          Title:  MPI Config message, structures, and Pages
- *  Creation Date:  July 27, 2000
- *
- *    MPI_CNFG.H Version:  01.02.13
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  05-08-00  00.10.01  Original release for 0.10 spec dated 4/26/2000.
- *  06-06-00  01.00.01  Update version number for 1.0 release.
- *  06-08-00  01.00.02  Added _PAGEVERSION definitions for all pages.
- *                      Added FcPhLowestVersion, FcPhHighestVersion, Reserved2
- *                      fields to FC_DEVICE_0 page, updated the page version.
- *                      Changed _FREE_RUNNING_CLOCK to _PACING_TRANSFERS in
- *                      SCSI_PORT_0, SCSI_DEVICE_0 and SCSI_DEVICE_1 pages
- *                      and updated the page versions.
- *                      Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
- *                      page and updated the page version.
- *                      Added Information field and _INFO_PARAMS_NEGOTIATED
- *                      definitionto SCSI_DEVICE_0 page.
- *  06-22-00  01.00.03  Removed batch controls from LAN_0 page and updated the
- *                      page version.
- *                      Added BucketsRemaining to LAN_1 page, redefined the
- *                      state values, and updated the page version.
- *                      Revised bus width definitions in SCSI_PORT_0,
- *                      SCSI_DEVICE_0 and SCSI_DEVICE_1 pages.
- *  06-30-00  01.00.04  Added MaxReplySize to LAN_1 page and updated the page
- *                      version.
- *                      Moved FC_DEVICE_0 PageAddress description to spec.
- *  07-27-00  01.00.05  Corrected the SubsystemVendorID and SubsystemID field
- *                      widths in IOC_0 page and updated the page version.
- *  11-02-00  01.01.01  Original release for post 1.0 work
- *                      Added Manufacturing pages, IO Unit Page 2, SCSI SPI
- *                      Port Page 2, FC Port Page 4, FC Port Page 5
- *  11-15-00  01.01.02  Interim changes to match proposals
- *  12-04-00  01.01.03  Config page changes to match MPI rev 1.00.01.
- *  12-05-00  01.01.04  Modified config page actions.
- *  01-09-01  01.01.05  Added defines for page address formats.
- *                      Data size for Manufacturing pages 2 and 3 no longer
- *                      defined here.
- *                      Io Unit Page 2 size is fixed at 4 adapters and some
- *                      flags were changed.
- *                      SCSI Port Page 2 Device Settings modified.
- *                      New fields added to FC Port Page 0 and some flags
- *                      cleaned up.
- *                      Removed impedance flash from FC Port Page 1.
- *                      Added FC Port pages 6 and 7.
- *  01-25-01  01.01.06  Added MaxInitiators field to FcPortPage0.
- *  01-29-01  01.01.07  Changed some defines to make them 32 character unique.
- *                      Added some LinkType defines for FcPortPage0.
- *  02-20-01  01.01.08  Started using MPI_POINTER.
- *  02-27-01  01.01.09  Replaced MPI_CONFIG_PAGETYPE_SCSI_LUN with
- *                      MPI_CONFIG_PAGETYPE_RAID_VOLUME.
- *                      Added definitions and structures for IOC Page 2 and
- *                      RAID Volume Page 2.
- *  03-27-01  01.01.10  Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9.
- *                      CONFIG_PAGE_FC_PORT_3 now supports persistent by DID.
- *                      Added VendorId and ProductRevLevel fields to
- *                      RAIDVOL2_IM_PHYS_ID struct.
- *                      Modified values for MPI_FCPORTPAGE0_FLAGS_ATTACH_
- *                      defines to make them compatible to MPI version 1.0.
- *                      Added structure offset comments.
- *  04-09-01  01.01.11  Added some new defines for the PageAddress field and
- *                      removed some obsolete ones.
- *                      Added IO Unit Page 3.
- *                      Modified defines for Scsi Port Page 2.
- *                      Modified RAID Volume Pages.
- *  08-08-01  01.02.01  Original release for v1.2 work.
- *                      Added SepID and SepBus to RVP2 IMPhysicalDisk struct.
- *                      Added defines for the SEP bits in RVP2 VolumeSettings.
- *                      Modified the DeviceSettings field in RVP2 to use the
- *                      proper structure.
- *                      Added defines for SES, SAF-TE, and cross channel for
- *                      IOCPage2 CapabilitiesFlags.
- *                      Removed define for MPI_IOUNITPAGE2_FLAGS_RAID_DISABLE.
- *                      Removed define for
- *                      MPI_SCSIPORTPAGE2_PORT_FLAGS_PARITY_ENABLE.
- *                      Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT.
- *  08-29-01 01.02.02   Fixed value for MPI_MANUFACTPAGE_DEVID_53C1035.
- *                      Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY
- *                      and MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY.
- *                      Removed MPI_SCSIPORTPAGE0_CAP_PACING_TRANSFERS,
- *                      MPI_SCSIDEVPAGE0_NP_PACING_TRANSFERS, and
- *                      MPI_SCSIDEVPAGE1_RP_PACING_TRANSFERS, and
- *                      MPI_SCSIDEVPAGE1_CONF_PPR_ALLOWED.
- *                      Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED
- *                      and MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED.
- *                      Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1.
- *                      Added rejected bits to SCSI Device Page 0 Information.
- *                      Increased size of ALPA array in FC Port Page 2 by one
- *                      and removed a one byte reserved field.
- *  09-28-01 01.02.03   Swapped NegWireSpeedLow and NegWireSpeedLow in
- *                      CONFIG_PAGE_LAN_1 to match preferred 64-bit ordering.
- *                      Added structures for Manufacturing Page 4, IO Unit
- *                      Page 3, IOC Page 3, IOC Page 4, RAID Volume Page 0, and
- *                      RAID PhysDisk Page 0.
- *  10-04-01 01.02.04   Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK.
- *                      Modified some of the new defines to make them 32
- *                      character unique.
- *                      Modified how variable length pages (arrays) are defined.
- *                      Added generic defines for hot spare pools and RAID
- *                      volume types.
- *  11-01-01 01.02.05   Added define for MPI_IOUNITPAGE1_DISABLE_IR.
- *  03-14-02 01.02.06   Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with
- *                      related define, and bumped the page version define.
- *  05-31-02 01.02.07   Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a
- *                      reserved byte and added a define.
- *                      Added define for
- *                      MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE.
- *                      Added new config page: CONFIG_PAGE_IOC_5.
- *                      Added MaxAliases, MaxHardAliases, and NumCurrentAliases
- *                      fields to CONFIG_PAGE_FC_PORT_0.
- *                      Added AltConnector and NumRequestedAliases fields to
- *                      CONFIG_PAGE_FC_PORT_1.
- *                      Added new config page: CONFIG_PAGE_FC_PORT_10.
- *  07-12-02 01.02.08   Added more MPI_MANUFACTPAGE_DEVID_ defines.
- *                      Added additional MPI_SCSIDEVPAGE0_NP_ defines.
- *                      Added more MPI_SCSIDEVPAGE1_RP_ defines.
- *                      Added define for
- *                      MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE.
- *                      Added new config page: CONFIG_PAGE_SCSI_DEVICE_3.
- *                      Modified MPI_FCPORTPAGE5_FLAGS_ defines.
- *  09-16-02 01.02.09   Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define.
- *  11-15-02 01.02.10   Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0.
- *                      Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
- *                      Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0.
- *  04-01-03 01.02.11   Added RR_TOV field and additional Flags defines for
- *                      CONFIG_PAGE_FC_PORT_1.
- *                      Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable
- *                      an alias.
- *                      Added more device id defines.
- *  06-26-03 01.02.12   Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define.
- *                      Added TargetConfig and IDConfig fields to
- *                      CONFIG_PAGE_SCSI_PORT_1.
- *                      Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2
- *                      to control DV.
- *                      Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
- *                      In CONFIG_PAGE_FC_DEVICE_0, replaced Reserved1 field
- *                      with ADISCHardALPA.
- *                      Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define.
- *  01-16-04 01.02.13   Added InitiatorDeviceTimeout and InitiatorIoPendTimeout
- *                      fields and related defines to CONFIG_PAGE_FC_PORT_1.
- *                      Added define for
- *                      MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK.
- *                      Added new fields to the substructures of
- *                      CONFIG_PAGE_FC_PORT_10.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI_CNFG_H
-#define MPI_CNFG_H
-
-
-/*****************************************************************************
-*
-*       C o n f i g    M e s s a g e    a n d    S t r u c t u r e s
-*
-*****************************************************************************/
-
-typedef struct _CONFIG_PAGE_HEADER
-{
-    U8                      PageVersion;                /* 00h */
-    U8                      PageLength;                 /* 01h */
-    U8                      PageNumber;                 /* 02h */
-    U8                      PageType;                   /* 03h */
-} CONFIG_PAGE_HEADER, MPI_POINTER PTR_CONFIG_PAGE_HEADER,
-  ConfigPageHeader_t, MPI_POINTER pConfigPageHeader_t;
-
-typedef union _CONFIG_PAGE_HEADER_UNION
-{
-   ConfigPageHeader_t  Struct;
-   U8                  Bytes[4];
-   U16                 Word16[2];
-   U32                 Word32;
-} ConfigPageHeaderUnion, MPI_POINTER pConfigPageHeaderUnion,
-  CONFIG_PAGE_HEADER_UNION, MPI_POINTER PTR_CONFIG_PAGE_HEADER_UNION;
-
-
-/****************************************************************************
-*   PageType field values
-****************************************************************************/
-#define MPI_CONFIG_PAGEATTR_READ_ONLY               (0x00)
-#define MPI_CONFIG_PAGEATTR_CHANGEABLE              (0x10)
-#define MPI_CONFIG_PAGEATTR_PERSISTENT              (0x20)
-#define MPI_CONFIG_PAGEATTR_RO_PERSISTENT           (0x30)
-#define MPI_CONFIG_PAGEATTR_MASK                    (0xF0)
-
-#define MPI_CONFIG_PAGETYPE_IO_UNIT                 (0x00)
-#define MPI_CONFIG_PAGETYPE_IOC                     (0x01)
-#define MPI_CONFIG_PAGETYPE_BIOS                    (0x02)
-#define MPI_CONFIG_PAGETYPE_SCSI_PORT               (0x03)
-#define MPI_CONFIG_PAGETYPE_SCSI_DEVICE             (0x04)
-#define MPI_CONFIG_PAGETYPE_FC_PORT                 (0x05)
-#define MPI_CONFIG_PAGETYPE_FC_DEVICE               (0x06)
-#define MPI_CONFIG_PAGETYPE_LAN                     (0x07)
-#define MPI_CONFIG_PAGETYPE_RAID_VOLUME             (0x08)
-#define MPI_CONFIG_PAGETYPE_MANUFACTURING           (0x09)
-#define MPI_CONFIG_PAGETYPE_RAID_PHYSDISK           (0x0A)
-#define MPI_CONFIG_PAGETYPE_MASK                    (0x0F)
-
-#define MPI_CONFIG_TYPENUM_MASK                     (0x0FFF)
-
-
-/****************************************************************************
-*   PageAddress field values
-****************************************************************************/
-#define MPI_SCSI_PORT_PGAD_PORT_MASK                (0x000000FF)
-
-#define MPI_SCSI_DEVICE_TARGET_ID_MASK              (0x000000FF)
-#define MPI_SCSI_DEVICE_TARGET_ID_SHIFT             (0)
-#define MPI_SCSI_DEVICE_BUS_MASK                    (0x0000FF00)
-#define MPI_SCSI_DEVICE_BUS_SHIFT                   (8)
-
-#define MPI_FC_PORT_PGAD_PORT_MASK                  (0xF0000000)
-#define MPI_FC_PORT_PGAD_PORT_SHIFT                 (28)
-#define MPI_FC_PORT_PGAD_FORM_MASK                  (0x0F000000)
-#define MPI_FC_PORT_PGAD_FORM_INDEX                 (0x01000000)
-#define MPI_FC_PORT_PGAD_INDEX_MASK                 (0x0000FFFF)
-#define MPI_FC_PORT_PGAD_INDEX_SHIFT                (0)
-
-#define MPI_FC_DEVICE_PGAD_PORT_MASK                (0xF0000000)
-#define MPI_FC_DEVICE_PGAD_PORT_SHIFT               (28)
-#define MPI_FC_DEVICE_PGAD_FORM_MASK                (0x0F000000)
-#define MPI_FC_DEVICE_PGAD_FORM_NEXT_DID            (0x00000000)
-#define MPI_FC_DEVICE_PGAD_ND_PORT_MASK             (0xF0000000)
-#define MPI_FC_DEVICE_PGAD_ND_PORT_SHIFT            (28)
-#define MPI_FC_DEVICE_PGAD_ND_DID_MASK              (0x00FFFFFF)
-#define MPI_FC_DEVICE_PGAD_ND_DID_SHIFT             (0)
-#define MPI_FC_DEVICE_PGAD_FORM_BUS_TID             (0x01000000)
-#define MPI_FC_DEVICE_PGAD_BT_BUS_MASK              (0x0000FF00)
-#define MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT             (8)
-#define MPI_FC_DEVICE_PGAD_BT_TID_MASK              (0x000000FF)
-#define MPI_FC_DEVICE_PGAD_BT_TID_SHIFT             (0)
-
-#define MPI_PHYSDISK_PGAD_PHYSDISKNUM_MASK          (0x000000FF)
-#define MPI_PHYSDISK_PGAD_PHYSDISKNUM_SHIFT         (0)
-
-
-
-/****************************************************************************
-*   Config Request Message
-****************************************************************************/
-typedef struct _MSG_CONFIG
-{
-    U8                      Action;                     /* 00h */
-    U8                      Reserved;                   /* 01h */
-    U8                      ChainOffset;                /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      Reserved1[3];               /* 04h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U8                      Reserved2[8];               /* 0Ch */
-    CONFIG_PAGE_HEADER      Header;                     /* 14h */
-    U32                     PageAddress;                /* 18h */
-    SGE_IO_UNION            PageBufferSGE;              /* 1Ch */
-} MSG_CONFIG, MPI_POINTER PTR_MSG_CONFIG,
-  Config_t, MPI_POINTER pConfig_t;
-
-
-/****************************************************************************
-*   Action field values
-****************************************************************************/
-#define MPI_CONFIG_ACTION_PAGE_HEADER               (0x00)
-#define MPI_CONFIG_ACTION_PAGE_READ_CURRENT         (0x01)
-#define MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT        (0x02)
-#define MPI_CONFIG_ACTION_PAGE_DEFAULT              (0x03)
-#define MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM          (0x04)
-#define MPI_CONFIG_ACTION_PAGE_READ_DEFAULT         (0x05)
-#define MPI_CONFIG_ACTION_PAGE_READ_NVRAM           (0x06)
-
-
-/* Config Reply Message */
-typedef struct _MSG_CONFIG_REPLY
-{
-    U8                      Action;                     /* 00h */
-    U8                      Reserved;                   /* 01h */
-    U8                      MsgLength;                  /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      Reserved1[3];               /* 04h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U8                      Reserved2[2];               /* 0Ch */
-    U16                     IOCStatus;                  /* 0Eh */
-    U32                     IOCLogInfo;                 /* 10h */
-    CONFIG_PAGE_HEADER      Header;                     /* 14h */
-} MSG_CONFIG_REPLY, MPI_POINTER PTR_MSG_CONFIG_REPLY,
-  ConfigReply_t, MPI_POINTER pConfigReply_t;
-
-
-
-/*****************************************************************************
-*
-*               C o n f i g u r a t i o n    P a g e s
-*
-*****************************************************************************/
-
-/****************************************************************************
-*   Manufacturing Config pages
-****************************************************************************/
-#define MPI_MANUFACTPAGE_VENDORID_LSILOGIC          (0x1000)
-#define MPI_MANUFACTPAGE_VENDORID_TREBIA            (0x1783)
-
-#define MPI_MANUFACTPAGE_DEVICEID_FC909             (0x0621)
-#define MPI_MANUFACTPAGE_DEVICEID_FC919             (0x0624)
-#define MPI_MANUFACTPAGE_DEVICEID_FC929             (0x0622)
-#define MPI_MANUFACTPAGE_DEVICEID_FC919X            (0x0628)
-#define MPI_MANUFACTPAGE_DEVICEID_FC929X            (0x0626)
-
-#define MPI_MANUFACTPAGE_DEVID_53C1030              (0x0030)
-#define MPI_MANUFACTPAGE_DEVID_53C1030ZC            (0x0031)
-#define MPI_MANUFACTPAGE_DEVID_1030_53C1035         (0x0032)
-#define MPI_MANUFACTPAGE_DEVID_1030ZC_53C1035       (0x0033)
-#define MPI_MANUFACTPAGE_DEVID_53C1035              (0x0040)
-#define MPI_MANUFACTPAGE_DEVID_53C1035ZC            (0x0041)
-
-#define MPI_MANUFACTPAGE_DEVID_SA2010               (0x0804)
-#define MPI_MANUFACTPAGE_DEVID_SA2010ZC             (0x0805)
-#define MPI_MANUFACTPAGE_DEVID_SA2020               (0x0806)
-#define MPI_MANUFACTPAGE_DEVID_SA2020ZC             (0x0807)
-
-#define MPI_MANUFACTPAGE_DEVID_SNP1000              (0x0010)
-#define MPI_MANUFACTPAGE_DEVID_SNP500               (0x0020)
-
-
-
-typedef struct _CONFIG_PAGE_MANUFACTURING_0
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U8                      ChipName[16];               /* 04h */
-    U8                      ChipRevision[8];            /* 14h */
-    U8                      BoardName[16];              /* 1Ch */
-    U8                      BoardAssembly[16];          /* 2Ch */
-    U8                      BoardTracerNumber[16];      /* 3Ch */
-
-} CONFIG_PAGE_MANUFACTURING_0, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_0,
-  ManufacturingPage0_t, MPI_POINTER pManufacturingPage0_t;
-
-#define MPI_MANUFACTURING0_PAGEVERSION                 (0x00)
-
-
-typedef struct _CONFIG_PAGE_MANUFACTURING_1
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U8                      VPD[256];                   /* 04h */
-} CONFIG_PAGE_MANUFACTURING_1, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_1,
-  ManufacturingPage1_t, MPI_POINTER pManufacturingPage1_t;
-
-#define MPI_MANUFACTURING1_PAGEVERSION                 (0x00)
-
-
-typedef struct _MPI_CHIP_REVISION_ID
-{
-    U16 DeviceID;                                       /* 00h */
-    U8  PCIRevisionID;                                  /* 02h */
-    U8  Reserved;                                       /* 03h */
-} MPI_CHIP_REVISION_ID, MPI_POINTER PTR_MPI_CHIP_REVISION_ID,
-  MpiChipRevisionId_t, MPI_POINTER pMpiChipRevisionId_t;
-
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI_MAN_PAGE_2_HW_SETTINGS_WORDS
-#define MPI_MAN_PAGE_2_HW_SETTINGS_WORDS    (1)
-#endif
-
-typedef struct _CONFIG_PAGE_MANUFACTURING_2
-{
-    CONFIG_PAGE_HEADER      Header;                                 /* 00h */
-    MPI_CHIP_REVISION_ID    ChipId;                                 /* 04h */
-    U32                     HwSettings[MPI_MAN_PAGE_2_HW_SETTINGS_WORDS];/* 08h */
-} CONFIG_PAGE_MANUFACTURING_2, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_2,
-  ManufacturingPage2_t, MPI_POINTER pManufacturingPage2_t;
-
-#define MPI_MANUFACTURING2_PAGEVERSION                  (0x00)
-
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI_MAN_PAGE_3_INFO_WORDS
-#define MPI_MAN_PAGE_3_INFO_WORDS           (1)
-#endif
-
-typedef struct _CONFIG_PAGE_MANUFACTURING_3
-{
-    CONFIG_PAGE_HEADER                  Header;                     /* 00h */
-    MPI_CHIP_REVISION_ID                ChipId;                     /* 04h */
-    U32                                 Info[MPI_MAN_PAGE_3_INFO_WORDS];/* 08h */
-} CONFIG_PAGE_MANUFACTURING_3, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_3,
-  ManufacturingPage3_t, MPI_POINTER pManufacturingPage3_t;
-
-#define MPI_MANUFACTURING3_PAGEVERSION                  (0x00)
-
-
-typedef struct _CONFIG_PAGE_MANUFACTURING_4
-{
-    CONFIG_PAGE_HEADER              Header;             /* 00h */
-    U32                             Reserved1;          /* 04h */
-    U8                              InfoOffset0;        /* 08h */
-    U8                              InfoSize0;          /* 09h */
-    U8                              InfoOffset1;        /* 0Ah */
-    U8                              InfoSize1;          /* 0Bh */
-    U8                              InquirySize;        /* 0Ch */
-    U8                              Reserved2;          /* 0Dh */
-    U16                             Reserved3;          /* 0Eh */
-    U8                              InquiryData[56];    /* 10h */
-    U32                             ISVolumeSettings;   /* 48h */
-    U32                             IMEVolumeSettings;  /* 4Ch */
-    U32                             IMVolumeSettings;   /* 50h */
-} CONFIG_PAGE_MANUFACTURING_4, MPI_POINTER PTR_CONFIG_PAGE_MANUFACTURING_4,
-  ManufacturingPage4_t, MPI_POINTER pManufacturingPage4_t;
-
-#define MPI_MANUFACTURING4_PAGEVERSION                  (0x00)
-
-
-/****************************************************************************
-*   IO Unit Config Pages
-****************************************************************************/
-
-typedef struct _CONFIG_PAGE_IO_UNIT_0
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U64                     UniqueValue;                /* 04h */
-} CONFIG_PAGE_IO_UNIT_0, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_0,
-  IOUnitPage0_t, MPI_POINTER pIOUnitPage0_t;
-
-#define MPI_IOUNITPAGE0_PAGEVERSION                     (0x00)
-
-
-typedef struct _CONFIG_PAGE_IO_UNIT_1
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     Flags;                      /* 04h */
-} CONFIG_PAGE_IO_UNIT_1, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_1,
-  IOUnitPage1_t, MPI_POINTER pIOUnitPage1_t;
-
-#define MPI_IOUNITPAGE1_PAGEVERSION                     (0x00)
-
-/* IO Unit Page 1 Flags defines */
-
-#define MPI_IOUNITPAGE1_MULTI_FUNCTION                  (0x00000000)
-#define MPI_IOUNITPAGE1_SINGLE_FUNCTION                 (0x00000001)
-#define MPI_IOUNITPAGE1_MULTI_PATHING                   (0x00000002)
-#define MPI_IOUNITPAGE1_SINGLE_PATHING                  (0x00000000)
-#define MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID         (0x00000004)
-#define MPI_IOUNITPAGE1_DISABLE_IR                      (0x00000040)
-#define MPI_IOUNITPAGE1_FORCE_32                        (0x00000080)
-
-
-typedef struct _MPI_ADAPTER_INFO
-{
-    U8      PciBusNumber;                               /* 00h */
-    U8      PciDeviceAndFunctionNumber;                 /* 01h */
-    U16     AdapterFlags;                               /* 02h */
-} MPI_ADAPTER_INFO, MPI_POINTER PTR_MPI_ADAPTER_INFO,
-  MpiAdapterInfo_t, MPI_POINTER pMpiAdapterInfo_t;
-
-#define MPI_ADAPTER_INFO_FLAGS_EMBEDDED                 (0x0001)
-#define MPI_ADAPTER_INFO_FLAGS_INIT_STATUS              (0x0002)
-
-typedef struct _CONFIG_PAGE_IO_UNIT_2
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     Flags;                      /* 04h */
-    U32                     BiosVersion;                /* 08h */
-    MPI_ADAPTER_INFO        AdapterOrder[4];            /* 0Ch */
-} CONFIG_PAGE_IO_UNIT_2, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_2,
-  IOUnitPage2_t, MPI_POINTER pIOUnitPage2_t;
-
-#define MPI_IOUNITPAGE2_PAGEVERSION                     (0x00)
-
-#define MPI_IOUNITPAGE2_FLAGS_PAUSE_ON_ERROR            (0x00000002)
-#define MPI_IOUNITPAGE2_FLAGS_VERBOSE_ENABLE            (0x00000004)
-#define MPI_IOUNITPAGE2_FLAGS_COLOR_VIDEO_DISABLE       (0x00000008)
-#define MPI_IOUNITPAGE2_FLAGS_DONT_HOOK_INT_40          (0x00000010)
-
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX
-#define MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX     (1)
-#endif
-
-typedef struct _CONFIG_PAGE_IO_UNIT_3
-{
-    CONFIG_PAGE_HEADER      Header;                                   /* 00h */
-    U8                      GPIOCount;                                /* 04h */
-    U8                      Reserved1;                                /* 05h */
-    U16                     Reserved2;                                /* 06h */
-    U16                     GPIOVal[MPI_IO_UNIT_PAGE_3_GPIO_VAL_MAX]; /* 08h */
-} CONFIG_PAGE_IO_UNIT_3, MPI_POINTER PTR_CONFIG_PAGE_IO_UNIT_3,
-  IOUnitPage3_t, MPI_POINTER pIOUnitPage3_t;
-
-#define MPI_IOUNITPAGE3_PAGEVERSION                     (0x01)
-
-#define MPI_IOUNITPAGE3_GPIO_FUNCTION_MASK              (0xFC)
-#define MPI_IOUNITPAGE3_GPIO_FUNCTION_SHIFT             (2)
-#define MPI_IOUNITPAGE3_GPIO_SETTING_OFF                (0x00)
-#define MPI_IOUNITPAGE3_GPIO_SETTING_ON                 (0x01)
-
-
-/****************************************************************************
-*   IOC Config Pages
-****************************************************************************/
-
-typedef struct _CONFIG_PAGE_IOC_0
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     TotalNVStore;               /* 04h */
-    U32                     FreeNVStore;                /* 08h */
-    U16                     VendorID;                   /* 0Ch */
-    U16                     DeviceID;                   /* 0Eh */
-    U8                      RevisionID;                 /* 10h */
-    U8                      Reserved[3];                /* 11h */
-    U32                     ClassCode;                  /* 14h */
-    U16                     SubsystemVendorID;          /* 18h */
-    U16                     SubsystemID;                /* 1Ah */
-} CONFIG_PAGE_IOC_0, MPI_POINTER PTR_CONFIG_PAGE_IOC_0,
-  IOCPage0_t, MPI_POINTER pIOCPage0_t;
-
-#define MPI_IOCPAGE0_PAGEVERSION                        (0x01)
-
-
-typedef struct _CONFIG_PAGE_IOC_1
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     Flags;                      /* 04h */
-    U32                     CoalescingTimeout;          /* 08h */
-    U8                      CoalescingDepth;            /* 0Ch */
-    U8                      PCISlotNum;                 /* 0Dh */
-    U8                      Reserved[2];                /* 0Eh */
-} CONFIG_PAGE_IOC_1, MPI_POINTER PTR_CONFIG_PAGE_IOC_1,
-  IOCPage1_t, MPI_POINTER pIOCPage1_t;
-
-#define MPI_IOCPAGE1_PAGEVERSION                        (0x01)
-
-#define MPI_IOCPAGE1_REPLY_COALESCING                   (0x00000001)
-
-#define MPI_IOCPAGE1_PCISLOTNUM_UNKNOWN                 (0xFF)
-
-
-typedef struct _CONFIG_PAGE_IOC_2_RAID_VOL
-{
-    U8                          VolumeID;               /* 00h */
-    U8                          VolumeBus;              /* 01h */
-    U8                          VolumeIOC;              /* 02h */
-    U8                          VolumePageNumber;       /* 03h */
-    U8                          VolumeType;             /* 04h */
-    U8                          Flags;                  /* 05h */
-    U16                         Reserved3;              /* 06h */
-} CONFIG_PAGE_IOC_2_RAID_VOL, MPI_POINTER PTR_CONFIG_PAGE_IOC_2_RAID_VOL,
-  ConfigPageIoc2RaidVol_t, MPI_POINTER pConfigPageIoc2RaidVol_t;
-
-/* IOC Page 2 Volume RAID Type values, also used in RAID Volume pages */
-
-#define MPI_RAID_VOL_TYPE_IS                        (0x00)
-#define MPI_RAID_VOL_TYPE_IME                       (0x01)
-#define MPI_RAID_VOL_TYPE_IM                        (0x02)
-
-/* IOC Page 2 Volume Flags values */
-
-#define MPI_IOCPAGE2_FLAG_VOLUME_INACTIVE           (0x08)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI_IOC_PAGE_2_RAID_VOLUME_MAX
-#define MPI_IOC_PAGE_2_RAID_VOLUME_MAX      (1)
-#endif
-
-typedef struct _CONFIG_PAGE_IOC_2
-{
-    CONFIG_PAGE_HEADER          Header;                              /* 00h */
-    U32                         CapabilitiesFlags;                   /* 04h */
-    U8                          NumActiveVolumes;                    /* 08h */
-    U8                          MaxVolumes;                          /* 09h */
-    U8                          NumActivePhysDisks;                  /* 0Ah */
-    U8                          MaxPhysDisks;                        /* 0Bh */
-    CONFIG_PAGE_IOC_2_RAID_VOL  RaidVolume[MPI_IOC_PAGE_2_RAID_VOLUME_MAX];/* 0Ch */
-} CONFIG_PAGE_IOC_2, MPI_POINTER PTR_CONFIG_PAGE_IOC_2,
-  IOCPage2_t, MPI_POINTER pIOCPage2_t;
-
-#define MPI_IOCPAGE2_PAGEVERSION                        (0x02)
-
-/* IOC Page 2 Capabilities flags */
-
-#define MPI_IOCPAGE2_CAP_FLAGS_IS_SUPPORT               (0x00000001)
-#define MPI_IOCPAGE2_CAP_FLAGS_IME_SUPPORT              (0x00000002)
-#define MPI_IOCPAGE2_CAP_FLAGS_IM_SUPPORT               (0x00000004)
-#define MPI_IOCPAGE2_CAP_FLAGS_SES_SUPPORT              (0x20000000)
-#define MPI_IOCPAGE2_CAP_FLAGS_SAFTE_SUPPORT            (0x40000000)
-#define MPI_IOCPAGE2_CAP_FLAGS_CROSS_CHANNEL_SUPPORT    (0x80000000)
-
-
-typedef struct _IOC_3_PHYS_DISK
-{
-    U8                          PhysDiskID;             /* 00h */
-    U8                          PhysDiskBus;            /* 01h */
-    U8                          PhysDiskIOC;            /* 02h */
-    U8                          PhysDiskNum;            /* 03h */
-} IOC_3_PHYS_DISK, MPI_POINTER PTR_IOC_3_PHYS_DISK,
-  Ioc3PhysDisk_t, MPI_POINTER pIoc3PhysDisk_t;
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI_IOC_PAGE_3_PHYSDISK_MAX
-#define MPI_IOC_PAGE_3_PHYSDISK_MAX         (1)
-#endif
-
-typedef struct _CONFIG_PAGE_IOC_3
-{
-    CONFIG_PAGE_HEADER          Header;                                /* 00h */
-    U8                          NumPhysDisks;                          /* 04h */
-    U8                          Reserved1;                             /* 05h */
-    U16                         Reserved2;                             /* 06h */
-    IOC_3_PHYS_DISK             PhysDisk[MPI_IOC_PAGE_3_PHYSDISK_MAX]; /* 08h */
-} CONFIG_PAGE_IOC_3, MPI_POINTER PTR_CONFIG_PAGE_IOC_3,
-  IOCPage3_t, MPI_POINTER pIOCPage3_t;
-
-#define MPI_IOCPAGE3_PAGEVERSION                        (0x00)
-
-
-typedef struct _IOC_4_SEP
-{
-    U8                          SEPTargetID;            /* 00h */
-    U8                          SEPBus;                 /* 01h */
-    U16                         Reserved;               /* 02h */
-} IOC_4_SEP, MPI_POINTER PTR_IOC_4_SEP,
-  Ioc4Sep_t, MPI_POINTER pIoc4Sep_t;
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI_IOC_PAGE_4_SEP_MAX
-#define MPI_IOC_PAGE_4_SEP_MAX              (1)
-#endif
-
-typedef struct _CONFIG_PAGE_IOC_4
-{
-    CONFIG_PAGE_HEADER          Header;                         /* 00h */
-    U8                          ActiveSEP;                      /* 04h */
-    U8                          MaxSEP;                         /* 05h */
-    U16                         Reserved1;                      /* 06h */
-    IOC_4_SEP                   SEP[MPI_IOC_PAGE_4_SEP_MAX];    /* 08h */
-} CONFIG_PAGE_IOC_4, MPI_POINTER PTR_CONFIG_PAGE_IOC_4,
-  IOCPage4_t, MPI_POINTER pIOCPage4_t;
-
-#define MPI_IOCPAGE4_PAGEVERSION                        (0x00)
-
-
-typedef struct _IOC_5_HOT_SPARE
-{
-    U8                          PhysDiskNum;            /* 00h */
-    U8                          Reserved;               /* 01h */
-    U8                          HotSparePool;           /* 02h */
-    U8                          Flags;                   /* 03h */
-} IOC_5_HOT_SPARE, MPI_POINTER PTR_IOC_5_HOT_SPARE,
-  Ioc5HotSpare_t, MPI_POINTER pIoc5HotSpare_t;
-
-/* IOC Page 5 HotSpare Flags */
-#define MPI_IOC_PAGE_5_HOT_SPARE_ACTIVE                 (0x01)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI_IOC_PAGE_5_HOT_SPARE_MAX
-#define MPI_IOC_PAGE_5_HOT_SPARE_MAX        (1)
-#endif
-
-typedef struct _CONFIG_PAGE_IOC_5
-{
-    CONFIG_PAGE_HEADER          Header;                         /* 00h */
-    U32                         Reserved1;                      /* 04h */
-    U8                          NumHotSpares;                   /* 08h */
-    U8                          Reserved2;                      /* 09h */
-    U16                         Reserved3;                      /* 0Ah */
-    IOC_5_HOT_SPARE             HotSpare[MPI_IOC_PAGE_5_HOT_SPARE_MAX]; /* 0Ch */
-} CONFIG_PAGE_IOC_5, MPI_POINTER PTR_CONFIG_PAGE_IOC_5,
-  IOCPage5_t, MPI_POINTER pIOCPage5_t;
-
-#define MPI_IOCPAGE5_PAGEVERSION                        (0x00)
-
-
-
-/****************************************************************************
-*   SCSI Port Config Pages
-****************************************************************************/
-
-typedef struct _CONFIG_PAGE_SCSI_PORT_0
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     Capabilities;               /* 04h */
-    U32                     PhysicalInterface;          /* 08h */
-} CONFIG_PAGE_SCSI_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_0,
-  SCSIPortPage0_t, MPI_POINTER pSCSIPortPage0_t;
-
-#define MPI_SCSIPORTPAGE0_PAGEVERSION                   (0x01)
-
-#define MPI_SCSIPORTPAGE0_CAP_IU                        (0x00000001)
-#define MPI_SCSIPORTPAGE0_CAP_DT                        (0x00000002)
-#define MPI_SCSIPORTPAGE0_CAP_QAS                       (0x00000004)
-#define MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK      (0x0000FF00)
-#define MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK      (0x00FF0000)
-#define MPI_SCSIPORTPAGE0_CAP_WIDE                      (0x20000000)
-#define MPI_SCSIPORTPAGE0_CAP_AIP                       (0x80000000)
-
-#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK          (0x00000003)
-#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD                (0x01)
-#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE                 (0x02)
-#define MPI_SCSIPORTPAGE0_PHY_SIGNAL_LVD                (0x03)
-#define MPI_SCSIPORTPAGE0_PHY_MASK_CONNECTED_ID         (0xFF000000)
-#define MPI_SCSIPORTPAGE0_PHY_SHIFT_CONNECTED_ID        (24)
-#define MPI_SCSIPORTPAGE0_PHY_BUS_FREE_CONNECTED_ID     (0xFE)
-#define MPI_SCSIPORTPAGE0_PHY_UNKNOWN_CONNECTED_ID      (0xFF)
-
-
-typedef struct _CONFIG_PAGE_SCSI_PORT_1
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     Configuration;              /* 04h */
-    U32                     OnBusTimerValue;            /* 08h */
-    U8                      TargetConfig;               /* 0Ch */
-    U8                      Reserved1;                  /* 0Dh */
-    U16                     IDConfig;                   /* 0Eh */
-} CONFIG_PAGE_SCSI_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_1,
-  SCSIPortPage1_t, MPI_POINTER pSCSIPortPage1_t;
-
-#define MPI_SCSIPORTPAGE1_PAGEVERSION                   (0x03)
-
-/* Configuration values */
-#define MPI_SCSIPORTPAGE1_CFG_PORT_SCSI_ID_MASK         (0x000000FF)
-#define MPI_SCSIPORTPAGE1_CFG_PORT_RESPONSE_ID_MASK     (0xFFFF0000)
-
-/* TargetConfig values */
-#define MPI_SCSIPORTPAGE1_TARGCONFIG_TARG_ONLY        (0x01)
-#define MPI_SCSIPORTPAGE1_TARGCONFIG_INIT_TARG        (0x02)
-
-
-typedef struct _MPI_DEVICE_INFO
-{
-    U8      Timeout;                                    /* 00h */
-    U8      SyncFactor;                                 /* 01h */
-    U16     DeviceFlags;                                /* 02h */
-} MPI_DEVICE_INFO, MPI_POINTER PTR_MPI_DEVICE_INFO,
-  MpiDeviceInfo_t, MPI_POINTER pMpiDeviceInfo_t;
-
-typedef struct _CONFIG_PAGE_SCSI_PORT_2
-{
-    CONFIG_PAGE_HEADER  Header;                         /* 00h */
-    U32                 PortFlags;                      /* 04h */
-    U32                 PortSettings;                   /* 08h */
-    MPI_DEVICE_INFO     DeviceSettings[16];             /* 0Ch */
-} CONFIG_PAGE_SCSI_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_PORT_2,
-  SCSIPortPage2_t, MPI_POINTER pSCSIPortPage2_t;
-
-#define MPI_SCSIPORTPAGE2_PAGEVERSION                       (0x02)
-
-/* PortFlags values */
-#define MPI_SCSIPORTPAGE2_PORT_FLAGS_SCAN_HIGH_TO_LOW       (0x00000001)
-#define MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET       (0x00000004)
-#define MPI_SCSIPORTPAGE2_PORT_FLAGS_ALTERNATE_CHS          (0x00000008)
-#define MPI_SCSIPORTPAGE2_PORT_FLAGS_TERMINATION_DISABLE    (0x00000010)
-
-#define MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK                (0x00000060)
-#define MPI_SCSIPORTPAGE2_PORT_FLAGS_FULL_DV                (0x00000000)
-#define MPI_SCSIPORTPAGE2_PORT_FLAGS_BASIC_DV_ONLY          (0x00000020)
-#define MPI_SCSIPORTPAGE2_PORT_FLAGS_OFF_DV                 (0x00000060)
-
-/* PortSettings values */
-#define MPI_SCSIPORTPAGE2_PORT_HOST_ID_MASK                 (0x0000000F)
-#define MPI_SCSIPORTPAGE2_PORT_MASK_INIT_HBA                (0x00000030)
-#define MPI_SCSIPORTPAGE2_PORT_DISABLE_INIT_HBA             (0x00000000)
-#define MPI_SCSIPORTPAGE2_PORT_BIOS_INIT_HBA                (0x00000010)
-#define MPI_SCSIPORTPAGE2_PORT_OS_INIT_HBA                  (0x00000020)
-#define MPI_SCSIPORTPAGE2_PORT_BIOS_OS_INIT_HBA             (0x00000030)
-#define MPI_SCSIPORTPAGE2_PORT_REMOVABLE_MEDIA              (0x000000C0)
-#define MPI_SCSIPORTPAGE2_PORT_SPINUP_DELAY_MASK            (0x00000F00)
-#define MPI_SCSIPORTPAGE2_PORT_MASK_NEGO_MASTER_SETTINGS    (0x00003000)
-#define MPI_SCSIPORTPAGE2_PORT_NEGO_MASTER_SETTINGS         (0x00000000)
-#define MPI_SCSIPORTPAGE2_PORT_NONE_MASTER_SETTINGS         (0x00001000)
-#define MPI_SCSIPORTPAGE2_PORT_ALL_MASTER_SETTINGS          (0x00003000)
-
-#define MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE          (0x0001)
-#define MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE             (0x0002)
-#define MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE            (0x0004)
-#define MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE           (0x0008)
-#define MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE               (0x0010)
-#define MPI_SCSIPORTPAGE2_DEVICE_BOOT_CHOICE                (0x0020)
-
-
-/****************************************************************************
-*   SCSI Target Device Config Pages
-****************************************************************************/
-
-typedef struct _CONFIG_PAGE_SCSI_DEVICE_0
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     NegotiatedParameters;       /* 04h */
-    U32                     Information;                /* 08h */
-} CONFIG_PAGE_SCSI_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_0,
-  SCSIDevicePage0_t, MPI_POINTER pSCSIDevicePage0_t;
-
-#define MPI_SCSIDEVPAGE0_PAGEVERSION                    (0x03)
-
-#define MPI_SCSIDEVPAGE0_NP_IU                          (0x00000001)
-#define MPI_SCSIDEVPAGE0_NP_DT                          (0x00000002)
-#define MPI_SCSIDEVPAGE0_NP_QAS                         (0x00000004)
-#define MPI_SCSIDEVPAGE0_NP_HOLD_MCS                    (0x00000008)
-#define MPI_SCSIDEVPAGE0_NP_WR_FLOW                     (0x00000010)
-#define MPI_SCSIDEVPAGE0_NP_RD_STRM                     (0x00000020)
-#define MPI_SCSIDEVPAGE0_NP_RTI                         (0x00000040)
-#define MPI_SCSIDEVPAGE0_NP_PCOMP_EN                    (0x00000080)
-#define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK        (0x0000FF00)
-#define MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK        (0x00FF0000)
-#define MPI_SCSIDEVPAGE0_NP_WIDE                        (0x20000000)
-#define MPI_SCSIDEVPAGE0_NP_AIP                         (0x80000000)
-
-#define MPI_SCSIDEVPAGE0_INFO_PARAMS_NEGOTIATED         (0x00000001)
-#define MPI_SCSIDEVPAGE0_INFO_SDTR_REJECTED             (0x00000002)
-#define MPI_SCSIDEVPAGE0_INFO_WDTR_REJECTED             (0x00000004)
-#define MPI_SCSIDEVPAGE0_INFO_PPR_REJECTED              (0x00000008)
-
-
-typedef struct _CONFIG_PAGE_SCSI_DEVICE_1
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     RequestedParameters;        /* 04h */
-    U32                     Reserved;                   /* 08h */
-    U32                     Configuration;              /* 0Ch */
-} CONFIG_PAGE_SCSI_DEVICE_1, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_1,
-  SCSIDevicePage1_t, MPI_POINTER pSCSIDevicePage1_t;
-
-#define MPI_SCSIDEVPAGE1_PAGEVERSION                    (0x04)
-
-#define MPI_SCSIDEVPAGE1_RP_IU                          (0x00000001)
-#define MPI_SCSIDEVPAGE1_RP_DT                          (0x00000002)
-#define MPI_SCSIDEVPAGE1_RP_QAS                         (0x00000004)
-#define MPI_SCSIDEVPAGE1_RP_HOLD_MCS                    (0x00000008)
-#define MPI_SCSIDEVPAGE1_RP_WR_FLOW                     (0x00000010)
-#define MPI_SCSIDEVPAGE1_RP_RD_STRM                     (0x00000020)
-#define MPI_SCSIDEVPAGE1_RP_RTI                         (0x00000040)
-#define MPI_SCSIDEVPAGE1_RP_PCOMP_EN                    (0x00000080)
-#define MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK        (0x0000FF00)
-#define MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK        (0x00FF0000)
-#define MPI_SCSIDEVPAGE1_RP_WIDE                        (0x20000000)
-#define MPI_SCSIDEVPAGE1_RP_AIP                         (0x80000000)
-
-#define MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED           (0x00000002)
-#define MPI_SCSIDEVPAGE1_CONF_SDTR_DISALLOWED           (0x00000004)
-#define MPI_SCSIDEVPAGE1_CONF_EXTENDED_PARAMS_ENABLE    (0x00000008)
-#define MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG             (0x00000010)
-
-
-typedef struct _CONFIG_PAGE_SCSI_DEVICE_2
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     DomainValidation;           /* 04h */
-    U32                     ParityPipeSelect;           /* 08h */
-    U32                     DataPipeSelect;             /* 0Ch */
-} CONFIG_PAGE_SCSI_DEVICE_2, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_2,
-  SCSIDevicePage2_t, MPI_POINTER pSCSIDevicePage2_t;
-
-#define MPI_SCSIDEVPAGE2_PAGEVERSION                    (0x01)
-
-#define MPI_SCSIDEVPAGE2_DV_ISI_ENABLE                  (0x00000010)
-#define MPI_SCSIDEVPAGE2_DV_SECONDARY_DRIVER_ENABLE     (0x00000020)
-#define MPI_SCSIDEVPAGE2_DV_SLEW_RATE_CTRL              (0x00000380)
-#define MPI_SCSIDEVPAGE2_DV_PRIM_DRIVE_STR_CTRL         (0x00001C00)
-#define MPI_SCSIDEVPAGE2_DV_SECOND_DRIVE_STR_CTRL       (0x0000E000)
-#define MPI_SCSIDEVPAGE2_DV_XCLKH_ST                    (0x10000000)
-#define MPI_SCSIDEVPAGE2_DV_XCLKS_ST                    (0x20000000)
-#define MPI_SCSIDEVPAGE2_DV_XCLKH_DT                    (0x40000000)
-#define MPI_SCSIDEVPAGE2_DV_XCLKS_DT                    (0x80000000)
-
-#define MPI_SCSIDEVPAGE2_PPS_PPS_MASK                   (0x00000003)
-
-#define MPI_SCSIDEVPAGE2_DPS_BIT_0_PL_SELECT_MASK       (0x00000003)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_1_PL_SELECT_MASK       (0x0000000C)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_2_PL_SELECT_MASK       (0x00000030)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_3_PL_SELECT_MASK       (0x000000C0)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_4_PL_SELECT_MASK       (0x00000300)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_5_PL_SELECT_MASK       (0x00000C00)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_6_PL_SELECT_MASK       (0x00003000)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_7_PL_SELECT_MASK       (0x0000C000)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_8_PL_SELECT_MASK       (0x00030000)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_9_PL_SELECT_MASK       (0x000C0000)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_10_PL_SELECT_MASK      (0x00300000)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_11_PL_SELECT_MASK      (0x00C00000)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_12_PL_SELECT_MASK      (0x03000000)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_13_PL_SELECT_MASK      (0x0C000000)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_14_PL_SELECT_MASK      (0x30000000)
-#define MPI_SCSIDEVPAGE2_DPS_BIT_15_PL_SELECT_MASK      (0xC0000000)
-
-
-typedef struct _CONFIG_PAGE_SCSI_DEVICE_3
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U16                     MsgRejectCount;             /* 04h */
-    U16                     PhaseErrorCount;            /* 06h */
-    U16                     ParityErrorCount;           /* 08h */
-    U16                     Reserved;                   /* 0Ah */
-} CONFIG_PAGE_SCSI_DEVICE_3, MPI_POINTER PTR_CONFIG_PAGE_SCSI_DEVICE_3,
-  SCSIDevicePage3_t, MPI_POINTER pSCSIDevicePage3_t;
-
-#define MPI_SCSIDEVPAGE3_PAGEVERSION                    (0x00)
-
-#define MPI_SCSIDEVPAGE3_MAX_COUNTER                    (0xFFFE)
-#define MPI_SCSIDEVPAGE3_UNSUPPORTED_COUNTER            (0xFFFF)
-
-
-/****************************************************************************
-*   FC Port Config Pages
-****************************************************************************/
-
-typedef struct _CONFIG_PAGE_FC_PORT_0
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     Flags;                      /* 04h */
-    U8                      MPIPortNumber;              /* 08h */
-    U8                      LinkType;                   /* 09h */
-    U8                      PortState;                  /* 0Ah */
-    U8                      Reserved;                   /* 0Bh */
-    U32                     PortIdentifier;             /* 0Ch */
-    U64                     WWNN;                       /* 10h */
-    U64                     WWPN;                       /* 18h */
-    U32                     SupportedServiceClass;      /* 20h */
-    U32                     SupportedSpeeds;            /* 24h */
-    U32                     CurrentSpeed;               /* 28h */
-    U32                     MaxFrameSize;               /* 2Ch */
-    U64                     FabricWWNN;                 /* 30h */
-    U64                     FabricWWPN;                 /* 38h */
-    U32                     DiscoveredPortsCount;       /* 40h */
-    U32                     MaxInitiators;              /* 44h */
-    U8                      MaxAliasesSupported;        /* 48h */
-    U8                      MaxHardAliasesSupported;    /* 49h */
-    U8                      NumCurrentAliases;          /* 4Ah */
-    U8                      Reserved1;                  /* 4Bh */
-} CONFIG_PAGE_FC_PORT_0, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_0,
-  FCPortPage0_t, MPI_POINTER pFCPortPage0_t;
-
-#define MPI_FCPORTPAGE0_PAGEVERSION                     (0x02)
-
-#define MPI_FCPORTPAGE0_FLAGS_PROT_MASK                 (0x0000000F)
-#define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_INIT             (MPI_PORTFACTS_PROTOCOL_INITIATOR)
-#define MPI_FCPORTPAGE0_FLAGS_PROT_FCP_TARG             (MPI_PORTFACTS_PROTOCOL_TARGET)
-#define MPI_FCPORTPAGE0_FLAGS_PROT_LAN                  (MPI_PORTFACTS_PROTOCOL_LAN)
-#define MPI_FCPORTPAGE0_FLAGS_PROT_LOGBUSADDR           (MPI_PORTFACTS_PROTOCOL_LOGBUSADDR)
-
-#define MPI_FCPORTPAGE0_FLAGS_ALIAS_ALPA_SUPPORTED      (0x00000010)
-#define MPI_FCPORTPAGE0_FLAGS_ALIAS_WWN_SUPPORTED       (0x00000020)
-#define MPI_FCPORTPAGE0_FLAGS_FABRIC_WWN_VALID          (0x00000040)
-
-#define MPI_FCPORTPAGE0_FLAGS_ATTACH_TYPE_MASK          (0x00000F00)
-#define MPI_FCPORTPAGE0_FLAGS_ATTACH_NO_INIT            (0x00000000)
-#define MPI_FCPORTPAGE0_FLAGS_ATTACH_POINT_TO_POINT     (0x00000100)
-#define MPI_FCPORTPAGE0_FLAGS_ATTACH_PRIVATE_LOOP       (0x00000200)
-#define MPI_FCPORTPAGE0_FLAGS_ATTACH_FABRIC_DIRECT      (0x00000400)
-#define MPI_FCPORTPAGE0_FLAGS_ATTACH_PUBLIC_LOOP        (0x00000800)
-
-#define MPI_FCPORTPAGE0_LTYPE_RESERVED                  (0x00)
-#define MPI_FCPORTPAGE0_LTYPE_OTHER                     (0x01)
-#define MPI_FCPORTPAGE0_LTYPE_UNKNOWN                   (0x02)
-#define MPI_FCPORTPAGE0_LTYPE_COPPER                    (0x03)
-#define MPI_FCPORTPAGE0_LTYPE_SINGLE_1300               (0x04)
-#define MPI_FCPORTPAGE0_LTYPE_SINGLE_1500               (0x05)
-#define MPI_FCPORTPAGE0_LTYPE_50_LASER_MULTI            (0x06)
-#define MPI_FCPORTPAGE0_LTYPE_50_LED_MULTI              (0x07)
-#define MPI_FCPORTPAGE0_LTYPE_62_LASER_MULTI            (0x08)
-#define MPI_FCPORTPAGE0_LTYPE_62_LED_MULTI              (0x09)
-#define MPI_FCPORTPAGE0_LTYPE_MULTI_LONG_WAVE           (0x0A)
-#define MPI_FCPORTPAGE0_LTYPE_MULTI_SHORT_WAVE          (0x0B)
-#define MPI_FCPORTPAGE0_LTYPE_LASER_SHORT_WAVE          (0x0C)
-#define MPI_FCPORTPAGE0_LTYPE_LED_SHORT_WAVE            (0x0D)
-#define MPI_FCPORTPAGE0_LTYPE_1300_LONG_WAVE            (0x0E)
-#define MPI_FCPORTPAGE0_LTYPE_1500_LONG_WAVE            (0x0F)
-
-#define MPI_FCPORTPAGE0_PORTSTATE_UNKNOWN               (0x01)      /*(SNIA)HBA_PORTSTATE_UNKNOWN       1 Unknown */
-#define MPI_FCPORTPAGE0_PORTSTATE_ONLINE                (0x02)      /*(SNIA)HBA_PORTSTATE_ONLINE        2 Operational */
-#define MPI_FCPORTPAGE0_PORTSTATE_OFFLINE               (0x03)      /*(SNIA)HBA_PORTSTATE_OFFLINE       3 User Offline */
-#define MPI_FCPORTPAGE0_PORTSTATE_BYPASSED              (0x04)      /*(SNIA)HBA_PORTSTATE_BYPASSED      4 Bypassed */
-#define MPI_FCPORTPAGE0_PORTSTATE_DIAGNOST              (0x05)      /*(SNIA)HBA_PORTSTATE_DIAGNOSTICS   5 In diagnostics mode */
-#define MPI_FCPORTPAGE0_PORTSTATE_LINKDOWN              (0x06)      /*(SNIA)HBA_PORTSTATE_LINKDOWN      6 Link Down */
-#define MPI_FCPORTPAGE0_PORTSTATE_ERROR                 (0x07)      /*(SNIA)HBA_PORTSTATE_ERROR         7 Port Error */
-#define MPI_FCPORTPAGE0_PORTSTATE_LOOPBACK              (0x08)      /*(SNIA)HBA_PORTSTATE_LOOPBACK      8 Loopback */
-
-#define MPI_FCPORTPAGE0_SUPPORT_CLASS_1                 (0x00000001)
-#define MPI_FCPORTPAGE0_SUPPORT_CLASS_2                 (0x00000002)
-#define MPI_FCPORTPAGE0_SUPPORT_CLASS_3                 (0x00000004)
-
-#define MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED             (0x00000001) /* (SNIA)HBA_PORTSPEED_1GBIT 1  1 GBit/sec  */
-#define MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED             (0x00000002) /* (SNIA)HBA_PORTSPEED_2GBIT 2  2 GBit/sec  */
-#define MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED            (0x00000004) /* (SNIA)HBA_PORTSPEED_10GBIT 4 10 GBit/sec */
-
-#define MPI_FCPORTPAGE0_CURRENT_SPEED_1GBIT             MPI_FCPORTPAGE0_SUPPORT_1GBIT_SPEED
-#define MPI_FCPORTPAGE0_CURRENT_SPEED_2GBIT             MPI_FCPORTPAGE0_SUPPORT_2GBIT_SPEED
-#define MPI_FCPORTPAGE0_CURRENT_SPEED_10GBIT            MPI_FCPORTPAGE0_SUPPORT_10GBIT_SPEED
-
-
-typedef struct _CONFIG_PAGE_FC_PORT_1
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     Flags;                      /* 04h */
-    U64                     NoSEEPROMWWNN;              /* 08h */
-    U64                     NoSEEPROMWWPN;              /* 10h */
-    U8                      HardALPA;                   /* 18h */
-    U8                      LinkConfig;                 /* 19h */
-    U8                      TopologyConfig;             /* 1Ah */
-    U8                      AltConnector;               /* 1Bh */
-    U8                      NumRequestedAliases;        /* 1Ch */
-    U8                      RR_TOV;                     /* 1Dh */
-    U8                      InitiatorDeviceTimeout;     /* 1Eh */
-    U8                      InitiatorIoPendTimeout;     /* 1Fh */
-} CONFIG_PAGE_FC_PORT_1, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_1,
-  FCPortPage1_t, MPI_POINTER pFCPortPage1_t;
-
-#define MPI_FCPORTPAGE1_PAGEVERSION                     (0x06)
-
-#define MPI_FCPORTPAGE1_FLAGS_EXT_FCP_STATUS_EN         (0x08000000)
-#define MPI_FCPORTPAGE1_FLAGS_IMMEDIATE_ERROR_REPLY     (0x04000000)
-#define MPI_FCPORTPAGE1_FLAGS_FORCE_USE_NOSEEPROM_WWNS  (0x02000000)
-#define MPI_FCPORTPAGE1_FLAGS_VERBOSE_RESCAN_EVENTS     (0x01000000)
-#define MPI_FCPORTPAGE1_FLAGS_TARGET_MODE_OXID          (0x00800000)
-#define MPI_FCPORTPAGE1_FLAGS_PORT_OFFLINE              (0x00400000)
-#define MPI_FCPORTPAGE1_FLAGS_SOFT_ALPA_FALLBACK        (0x00200000)
-#define MPI_FCPORTPAGE1_FLAGS_MASK_RR_TOV_UNITS         (0x00000070)
-#define MPI_FCPORTPAGE1_FLAGS_SUPPRESS_PROT_REG         (0x00000008)
-#define MPI_FCPORTPAGE1_FLAGS_PLOGI_ON_LOGO             (0x00000004)
-#define MPI_FCPORTPAGE1_FLAGS_MAINTAIN_LOGINS           (0x00000002)
-#define MPI_FCPORTPAGE1_FLAGS_SORT_BY_DID               (0x00000001)
-#define MPI_FCPORTPAGE1_FLAGS_SORT_BY_WWN               (0x00000000)
-
-#define MPI_FCPORTPAGE1_FLAGS_PROT_MASK                 (0xF0000000)
-#define MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT                (28)
-#define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_INIT             ((U32)MPI_PORTFACTS_PROTOCOL_INITIATOR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
-#define MPI_FCPORTPAGE1_FLAGS_PROT_FCP_TARG             ((U32)MPI_PORTFACTS_PROTOCOL_TARGET << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
-#define MPI_FCPORTPAGE1_FLAGS_PROT_LAN                  ((U32)MPI_PORTFACTS_PROTOCOL_LAN << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
-#define MPI_FCPORTPAGE1_FLAGS_PROT_LOGBUSADDR           ((U32)MPI_PORTFACTS_PROTOCOL_LOGBUSADDR << MPI_FCPORTPAGE1_FLAGS_PROT_SHIFT)
-
-#define MPI_FCPORTPAGE1_FLAGS_NONE_RR_TOV_UNITS         (0x00000000)
-#define MPI_FCPORTPAGE1_FLAGS_THOUSANDTH_RR_TOV_UNITS   (0x00000010)
-#define MPI_FCPORTPAGE1_FLAGS_TENTH_RR_TOV_UNITS        (0x00000030)
-#define MPI_FCPORTPAGE1_FLAGS_TEN_RR_TOV_UNITS          (0x00000050)
-
-#define MPI_FCPORTPAGE1_HARD_ALPA_NOT_USED              (0xFF)
-
-#define MPI_FCPORTPAGE1_LCONFIG_SPEED_MASK              (0x0F)
-#define MPI_FCPORTPAGE1_LCONFIG_SPEED_1GIG              (0x00)
-#define MPI_FCPORTPAGE1_LCONFIG_SPEED_2GIG              (0x01)
-#define MPI_FCPORTPAGE1_LCONFIG_SPEED_4GIG              (0x02)
-#define MPI_FCPORTPAGE1_LCONFIG_SPEED_10GIG             (0x03)
-#define MPI_FCPORTPAGE1_LCONFIG_SPEED_AUTO              (0x0F)
-
-#define MPI_FCPORTPAGE1_TOPOLOGY_MASK                   (0x0F)
-#define MPI_FCPORTPAGE1_TOPOLOGY_NLPORT                 (0x01)
-#define MPI_FCPORTPAGE1_TOPOLOGY_NPORT                  (0x02)
-#define MPI_FCPORTPAGE1_TOPOLOGY_AUTO                   (0x0F)
-
-#define MPI_FCPORTPAGE1_ALT_CONN_UNKNOWN                (0x00)
-
-#define MPI_FCPORTPAGE1_INITIATOR_DEV_TIMEOUT_MASK      (0x7F)
-#define MPI_FCPORTPAGE1_INITIATOR_DEV_UNIT_16           (0x80)
-
-
-typedef struct _CONFIG_PAGE_FC_PORT_2
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U8                      NumberActive;               /* 04h */
-    U8                      ALPA[127];                  /* 05h */
-} CONFIG_PAGE_FC_PORT_2, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_2,
-  FCPortPage2_t, MPI_POINTER pFCPortPage2_t;
-
-#define MPI_FCPORTPAGE2_PAGEVERSION                     (0x01)
-
-
-typedef struct _WWN_FORMAT
-{
-    U64                     WWNN;                       /* 00h */
-    U64                     WWPN;                       /* 08h */
-} WWN_FORMAT, MPI_POINTER PTR_WWN_FORMAT,
-  WWNFormat, MPI_POINTER pWWNFormat;
-
-typedef union _FC_PORT_PERSISTENT_PHYSICAL_ID
-{
-    WWN_FORMAT              WWN;
-    U32                     Did;
-} FC_PORT_PERSISTENT_PHYSICAL_ID, MPI_POINTER PTR_FC_PORT_PERSISTENT_PHYSICAL_ID,
-  PersistentPhysicalId_t, MPI_POINTER pPersistentPhysicalId_t;
-
-typedef struct _FC_PORT_PERSISTENT
-{
-    FC_PORT_PERSISTENT_PHYSICAL_ID  PhysicalIdentifier; /* 00h */
-    U8                              TargetID;           /* 10h */
-    U8                              Bus;                /* 11h */
-    U16                             Flags;              /* 12h */
-} FC_PORT_PERSISTENT, MPI_POINTER PTR_FC_PORT_PERSISTENT,
-  PersistentData_t, MPI_POINTER pPersistentData_t;
-
-#define MPI_PERSISTENT_FLAGS_SHIFT                      (16)
-#define MPI_PERSISTENT_FLAGS_ENTRY_VALID                (0x0001)
-#define MPI_PERSISTENT_FLAGS_SCAN_ID                    (0x0002)
-#define MPI_PERSISTENT_FLAGS_SCAN_LUNS                  (0x0004)
-#define MPI_PERSISTENT_FLAGS_BOOT_DEVICE                (0x0008)
-#define MPI_PERSISTENT_FLAGS_BY_DID                     (0x0080)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI_FC_PORT_PAGE_3_ENTRY_MAX
-#define MPI_FC_PORT_PAGE_3_ENTRY_MAX        (1)
-#endif
-
-typedef struct _CONFIG_PAGE_FC_PORT_3
-{
-    CONFIG_PAGE_HEADER      Header;                                 /* 00h */
-    FC_PORT_PERSISTENT      Entry[MPI_FC_PORT_PAGE_3_ENTRY_MAX];    /* 04h */
-} CONFIG_PAGE_FC_PORT_3, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_3,
-  FCPortPage3_t, MPI_POINTER pFCPortPage3_t;
-
-#define MPI_FCPORTPAGE3_PAGEVERSION                     (0x01)
-
-
-typedef struct _CONFIG_PAGE_FC_PORT_4
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     PortFlags;                  /* 04h */
-    U32                     PortSettings;               /* 08h */
-} CONFIG_PAGE_FC_PORT_4, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_4,
-  FCPortPage4_t, MPI_POINTER pFCPortPage4_t;
-
-#define MPI_FCPORTPAGE4_PAGEVERSION                     (0x00)
-
-#define MPI_FCPORTPAGE4_PORT_FLAGS_ALTERNATE_CHS        (0x00000008)
-
-#define MPI_FCPORTPAGE4_PORT_MASK_INIT_HBA              (0x00000030)
-#define MPI_FCPORTPAGE4_PORT_DISABLE_INIT_HBA           (0x00000000)
-#define MPI_FCPORTPAGE4_PORT_BIOS_INIT_HBA              (0x00000010)
-#define MPI_FCPORTPAGE4_PORT_OS_INIT_HBA                (0x00000020)
-#define MPI_FCPORTPAGE4_PORT_BIOS_OS_INIT_HBA           (0x00000030)
-#define MPI_FCPORTPAGE4_PORT_REMOVABLE_MEDIA            (0x000000C0)
-#define MPI_FCPORTPAGE4_PORT_SPINUP_DELAY_MASK          (0x00000F00)
-
-
-typedef struct _CONFIG_PAGE_FC_PORT_5_ALIAS_INFO
-{
-    U8      Flags;                                      /* 00h */
-    U8      AliasAlpa;                                  /* 01h */
-    U16     Reserved;                                   /* 02h */
-    U64     AliasWWNN;                                  /* 04h */
-    U64     AliasWWPN;                                  /* 0Ch */
-} CONFIG_PAGE_FC_PORT_5_ALIAS_INFO,
-  MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5_ALIAS_INFO,
-  FcPortPage5AliasInfo_t, MPI_POINTER pFcPortPage5AliasInfo_t;
-
-typedef struct _CONFIG_PAGE_FC_PORT_5
-{
-    CONFIG_PAGE_HEADER                  Header;         /* 00h */
-    CONFIG_PAGE_FC_PORT_5_ALIAS_INFO    AliasInfo;      /* 04h */
-} CONFIG_PAGE_FC_PORT_5, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_5,
-  FCPortPage5_t, MPI_POINTER pFCPortPage5_t;
-
-#define MPI_FCPORTPAGE5_PAGEVERSION                     (0x02)
-
-#define MPI_FCPORTPAGE5_FLAGS_ALPA_ACQUIRED             (0x01)
-#define MPI_FCPORTPAGE5_FLAGS_HARD_ALPA                 (0x02)
-#define MPI_FCPORTPAGE5_FLAGS_HARD_WWNN                 (0x04)
-#define MPI_FCPORTPAGE5_FLAGS_HARD_WWPN                 (0x08)
-#define MPI_FCPORTPAGE5_FLAGS_DISABLE                   (0x10)
-
-typedef struct _CONFIG_PAGE_FC_PORT_6
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     Reserved;                   /* 04h */
-    U64                     TimeSinceReset;             /* 08h */
-    U64                     TxFrames;                   /* 10h */
-    U64                     RxFrames;                   /* 18h */
-    U64                     TxWords;                    /* 20h */
-    U64                     RxWords;                    /* 28h */
-    U64                     LipCount;                   /* 30h */
-    U64                     NosCount;                   /* 38h */
-    U64                     ErrorFrames;                /* 40h */
-    U64                     DumpedFrames;               /* 48h */
-    U64                     LinkFailureCount;           /* 50h */
-    U64                     LossOfSyncCount;            /* 58h */
-    U64                     LossOfSignalCount;          /* 60h */
-    U64                     PrimativeSeqErrCount;       /* 68h */
-    U64                     InvalidTxWordCount;         /* 70h */
-    U64                     InvalidCrcCount;            /* 78h */
-    U64                     FcpInitiatorIoCount;        /* 80h */
-} CONFIG_PAGE_FC_PORT_6, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_6,
-  FCPortPage6_t, MPI_POINTER pFCPortPage6_t;
-
-#define MPI_FCPORTPAGE6_PAGEVERSION                     (0x00)
-
-
-typedef struct _CONFIG_PAGE_FC_PORT_7
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     Reserved;                   /* 04h */
-    U8                      PortSymbolicName[256];      /* 08h */
-} CONFIG_PAGE_FC_PORT_7, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_7,
-  FCPortPage7_t, MPI_POINTER pFCPortPage7_t;
-
-#define MPI_FCPORTPAGE7_PAGEVERSION                     (0x00)
-
-
-typedef struct _CONFIG_PAGE_FC_PORT_8
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     BitVector[8];               /* 04h */
-} CONFIG_PAGE_FC_PORT_8, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_8,
-  FCPortPage8_t, MPI_POINTER pFCPortPage8_t;
-
-#define MPI_FCPORTPAGE8_PAGEVERSION                     (0x00)
-
-
-typedef struct _CONFIG_PAGE_FC_PORT_9
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U32                     Reserved;                   /* 04h */
-    U64                     GlobalWWPN;                 /* 08h */
-    U64                     GlobalWWNN;                 /* 10h */
-    U32                     UnitType;                   /* 18h */
-    U32                     PhysicalPortNumber;         /* 1Ch */
-    U32                     NumAttachedNodes;           /* 20h */
-    U16                     IPVersion;                  /* 24h */
-    U16                     UDPPortNumber;              /* 26h */
-    U8                      IPAddress[16];              /* 28h */
-    U16                     Reserved1;                  /* 38h */
-    U16                     TopologyDiscoveryFlags;     /* 3Ah */
-} CONFIG_PAGE_FC_PORT_9, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_9,
-  FCPortPage9_t, MPI_POINTER pFCPortPage9_t;
-
-#define MPI_FCPORTPAGE9_PAGEVERSION                     (0x00)
-
-
-typedef struct _CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA
-{
-    U8                      Id;                         /* 10h */
-    U8                      ExtId;                      /* 11h */
-    U8                      Connector;                  /* 12h */
-    U8                      Transceiver[8];             /* 13h */
-    U8                      Encoding;                   /* 1Bh */
-    U8                      BitRate_100mbs;             /* 1Ch */
-    U8                      Reserved1;                  /* 1Dh */
-    U8                      Length9u_km;                /* 1Eh */
-    U8                      Length9u_100m;              /* 1Fh */
-    U8                      Length50u_10m;              /* 20h */
-    U8                      Length62p5u_10m;            /* 21h */
-    U8                      LengthCopper_m;             /* 22h */
-    U8                      Reseverved2;                /* 22h */
-    U8                      VendorName[16];             /* 24h */
-    U8                      Reserved3;                  /* 34h */
-    U8                      VendorOUI[3];               /* 35h */
-    U8                      VendorPN[16];               /* 38h */
-    U8                      VendorRev[4];               /* 48h */
-    U16                     Wavelength;                 /* 4Ch */
-    U8                      Reserved4;                  /* 4Eh */
-    U8                      CC_BASE;                    /* 4Fh */
-} CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA,
-  MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA,
-  FCPortPage10BaseSfpData_t, MPI_POINTER pFCPortPage10BaseSfpData_t;
-
-#define MPI_FCPORT10_BASE_ID_UNKNOWN        (0x00)
-#define MPI_FCPORT10_BASE_ID_GBIC           (0x01)
-#define MPI_FCPORT10_BASE_ID_FIXED          (0x02)
-#define MPI_FCPORT10_BASE_ID_SFP            (0x03)
-#define MPI_FCPORT10_BASE_ID_SFP_MIN        (0x04)
-#define MPI_FCPORT10_BASE_ID_SFP_MAX        (0x7F)
-#define MPI_FCPORT10_BASE_ID_VEND_SPEC_MASK (0x80)
-
-#define MPI_FCPORT10_BASE_EXTID_UNKNOWN     (0x00)
-#define MPI_FCPORT10_BASE_EXTID_MODDEF1     (0x01)
-#define MPI_FCPORT10_BASE_EXTID_MODDEF2     (0x02)
-#define MPI_FCPORT10_BASE_EXTID_MODDEF3     (0x03)
-#define MPI_FCPORT10_BASE_EXTID_SEEPROM     (0x04)
-#define MPI_FCPORT10_BASE_EXTID_MODDEF5     (0x05)
-#define MPI_FCPORT10_BASE_EXTID_MODDEF6     (0x06)
-#define MPI_FCPORT10_BASE_EXTID_MODDEF7     (0x07)
-#define MPI_FCPORT10_BASE_EXTID_VNDSPC_MASK (0x80)
-
-#define MPI_FCPORT10_BASE_CONN_UNKNOWN      (0x00)
-#define MPI_FCPORT10_BASE_CONN_SC           (0x01)
-#define MPI_FCPORT10_BASE_CONN_COPPER1      (0x02)
-#define MPI_FCPORT10_BASE_CONN_COPPER2      (0x03)
-#define MPI_FCPORT10_BASE_CONN_BNC_TNC      (0x04)
-#define MPI_FCPORT10_BASE_CONN_COAXIAL      (0x05)
-#define MPI_FCPORT10_BASE_CONN_FIBERJACK    (0x06)
-#define MPI_FCPORT10_BASE_CONN_LC           (0x07)
-#define MPI_FCPORT10_BASE_CONN_MT_RJ        (0x08)
-#define MPI_FCPORT10_BASE_CONN_MU           (0x09)
-#define MPI_FCPORT10_BASE_CONN_SG           (0x0A)
-#define MPI_FCPORT10_BASE_CONN_OPT_PIGT     (0x0B)
-#define MPI_FCPORT10_BASE_CONN_RSV1_MIN     (0x0C)
-#define MPI_FCPORT10_BASE_CONN_RSV1_MAX     (0x1F)
-#define MPI_FCPORT10_BASE_CONN_HSSDC_II     (0x20)
-#define MPI_FCPORT10_BASE_CONN_CPR_PIGT     (0x21)
-#define MPI_FCPORT10_BASE_CONN_RSV2_MIN     (0x22)
-#define MPI_FCPORT10_BASE_CONN_RSV2_MAX     (0x7F)
-#define MPI_FCPORT10_BASE_CONN_VNDSPC_MASK  (0x80)
-
-#define MPI_FCPORT10_BASE_ENCODE_UNSPEC     (0x00)
-#define MPI_FCPORT10_BASE_ENCODE_8B10B      (0x01)
-#define MPI_FCPORT10_BASE_ENCODE_4B5B       (0x02)
-#define MPI_FCPORT10_BASE_ENCODE_NRZ        (0x03)
-#define MPI_FCPORT10_BASE_ENCODE_MANCHESTER (0x04)
-
-
-typedef struct _CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA
-{
-    U8                      Options[2];                 /* 50h */
-    U8                      BitRateMax;                 /* 52h */
-    U8                      BitRateMin;                 /* 53h */
-    U8                      VendorSN[16];               /* 54h */
-    U8                      DateCode[8];                /* 64h */
-    U8                      DiagMonitoringType;         /* 6Ch */
-    U8                      EnhancedOptions;            /* 6Dh */
-    U8                      SFF8472Compliance;          /* 6Eh */
-    U8                      CC_EXT;                     /* 6Fh */
-} CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA,
-  MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA,
-  FCPortPage10ExtendedSfpData_t, MPI_POINTER pFCPortPage10ExtendedSfpData_t;
-
-#define MPI_FCPORT10_EXT_OPTION1_RATESEL    (0x20)
-#define MPI_FCPORT10_EXT_OPTION1_TX_DISABLE (0x10)
-#define MPI_FCPORT10_EXT_OPTION1_TX_FAULT   (0x08)
-#define MPI_FCPORT10_EXT_OPTION1_LOS_INVERT (0x04)
-#define MPI_FCPORT10_EXT_OPTION1_LOS        (0x02)
-
-
-typedef struct _CONFIG_PAGE_FC_PORT_10
-{
-    CONFIG_PAGE_HEADER                          Header;             /* 00h */
-    U8                                          Flags;              /* 04h */
-    U8                                          Reserved1;          /* 05h */
-    U16                                         Reserved2;          /* 06h */
-    U32                                         HwConfig1;          /* 08h */
-    U32                                         HwConfig2;          /* 0Ch */
-    CONFIG_PAGE_FC_PORT_10_BASE_SFP_DATA        Base;               /* 10h */
-    CONFIG_PAGE_FC_PORT_10_EXTENDED_SFP_DATA    Extended;           /* 50h */
-    U8                                          VendorSpecific[32]; /* 70h */
-} CONFIG_PAGE_FC_PORT_10, MPI_POINTER PTR_CONFIG_PAGE_FC_PORT_10,
-  FCPortPage10_t, MPI_POINTER pFCPortPage10_t;
-
-#define MPI_FCPORTPAGE10_PAGEVERSION                    (0x01)
-
-/* standard MODDEF pin definitions (from GBIC spec.) */
-#define MPI_FCPORTPAGE10_FLAGS_MODDEF_MASK              (0x00000007)
-#define MPI_FCPORTPAGE10_FLAGS_MODDEF2                  (0x00000001)
-#define MPI_FCPORTPAGE10_FLAGS_MODDEF1                  (0x00000002)
-#define MPI_FCPORTPAGE10_FLAGS_MODDEF0                  (0x00000004)
-#define MPI_FCPORTPAGE10_FLAGS_MODDEF_NOGBIC            (0x00000007)
-#define MPI_FCPORTPAGE10_FLAGS_MODDEF_CPR_IEEE_CX       (0x00000006)
-#define MPI_FCPORTPAGE10_FLAGS_MODDEF_COPPER            (0x00000005)
-#define MPI_FCPORTPAGE10_FLAGS_MODDEF_OPTICAL_LW        (0x00000004)
-#define MPI_FCPORTPAGE10_FLAGS_MODDEF_SEEPROM           (0x00000003)
-#define MPI_FCPORTPAGE10_FLAGS_MODDEF_SW_OPTICAL        (0x00000002)
-#define MPI_FCPORTPAGE10_FLAGS_MODDEF_LX_IEEE_OPT_LW    (0x00000001)
-#define MPI_FCPORTPAGE10_FLAGS_MODDEF_SX_IEEE_OPT_SW    (0x00000000)
-
-#define MPI_FCPORTPAGE10_FLAGS_CC_BASE_OK               (0x00000010)
-#define MPI_FCPORTPAGE10_FLAGS_CC_EXT_OK                (0x00000020)
-
-
-/****************************************************************************
-*   FC Device Config Pages
-****************************************************************************/
-
-typedef struct _CONFIG_PAGE_FC_DEVICE_0
-{
-    CONFIG_PAGE_HEADER      Header;                     /* 00h */
-    U64                     WWNN;                       /* 04h */
-    U64                     WWPN;                       /* 0Ch */
-    U32                     PortIdentifier;             /* 14h */
-    U8                      Protocol;                   /* 18h */
-    U8                      Flags;                      /* 19h */
-    U16                     BBCredit;                   /* 1Ah */
-    U16                     MaxRxFrameSize;             /* 1Ch */
-    U8                      ADISCHardALPA;              /* 1Eh */
-    U8                      PortNumber;                 /* 1Fh */
-    U8                      FcPhLowestVersion;          /* 20h */
-    U8                      FcPhHighestVersion;         /* 21h */
-    U8                      CurrentTargetID;            /* 22h */
-    U8                      CurrentBus;                 /* 23h */
-} CONFIG_PAGE_FC_DEVICE_0, MPI_POINTER PTR_CONFIG_PAGE_FC_DEVICE_0,
-  FCDevicePage0_t, MPI_POINTER pFCDevicePage0_t;
-
-#define MPI_FC_DEVICE_PAGE0_PAGEVERSION                 (0x03)
-
-#define MPI_FC_DEVICE_PAGE0_FLAGS_TARGETID_BUS_VALID    (0x01)
-#define MPI_FC_DEVICE_PAGE0_FLAGS_PLOGI_INVALID         (0x02)
-#define MPI_FC_DEVICE_PAGE0_FLAGS_PRLI_INVALID          (0x04)
-
-#define MPI_FC_DEVICE_PAGE0_PROT_IP                     (0x01)
-#define MPI_FC_DEVICE_PAGE0_PROT_FCP_TARGET             (0x02)
-#define MPI_FC_DEVICE_PAGE0_PROT_FCP_INITIATOR          (0x04)
-#define MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY              (0x08)
-
-#define MPI_FC_DEVICE_PAGE0_PGAD_PORT_MASK      (MPI_FC_DEVICE_PGAD_PORT_MASK)
-#define MPI_FC_DEVICE_PAGE0_PGAD_FORM_MASK      (MPI_FC_DEVICE_PGAD_FORM_MASK)
-#define MPI_FC_DEVICE_PAGE0_PGAD_FORM_NEXT_DID  (MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
-#define MPI_FC_DEVICE_PAGE0_PGAD_FORM_BUS_TID   (MPI_FC_DEVICE_PGAD_FORM_BUS_TID)
-#define MPI_FC_DEVICE_PAGE0_PGAD_DID_MASK       (MPI_FC_DEVICE_PGAD_ND_DID_MASK)
-#define MPI_FC_DEVICE_PAGE0_PGAD_BUS_MASK       (MPI_FC_DEVICE_PGAD_BT_BUS_MASK)
-#define MPI_FC_DEVICE_PAGE0_PGAD_BUS_SHIFT      (MPI_FC_DEVICE_PGAD_BT_BUS_SHIFT)
-#define MPI_FC_DEVICE_PAGE0_PGAD_TID_MASK       (MPI_FC_DEVICE_PGAD_BT_TID_MASK)
-
-#define MPI_FC_DEVICE_PAGE0_HARD_ALPA_UNKNOWN   (0xFF)
-
-/****************************************************************************
-*   RAID Volume Config Pages
-****************************************************************************/
-
-typedef struct _RAID_VOL0_PHYS_DISK
-{
-    U16                         Reserved;               /* 00h */
-    U8                          PhysDiskMap;            /* 02h */
-    U8                          PhysDiskNum;            /* 03h */
-} RAID_VOL0_PHYS_DISK, MPI_POINTER PTR_RAID_VOL0_PHYS_DISK,
-  RaidVol0PhysDisk_t, MPI_POINTER pRaidVol0PhysDisk_t;
-
-#define MPI_RAIDVOL0_PHYSDISK_PRIMARY                   (0x01)
-#define MPI_RAIDVOL0_PHYSDISK_SECONDARY                 (0x02)
-
-typedef struct _RAID_VOL0_STATUS
-{
-    U8                          Flags;                  /* 00h */
-    U8                          State;                  /* 01h */
-    U16                         Reserved;               /* 02h */
-} RAID_VOL0_STATUS, MPI_POINTER PTR_RAID_VOL0_STATUS,
-  RaidVol0Status_t, MPI_POINTER pRaidVol0Status_t;
-
-/* RAID Volume Page 0 VolumeStatus defines */
-
-#define MPI_RAIDVOL0_STATUS_FLAG_ENABLED                (0x01)
-#define MPI_RAIDVOL0_STATUS_FLAG_QUIESCED               (0x02)
-#define MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS     (0x04)
-#define MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE        (0x08)
-
-#define MPI_RAIDVOL0_STATUS_STATE_OPTIMAL               (0x00)
-#define MPI_RAIDVOL0_STATUS_STATE_DEGRADED              (0x01)
-#define MPI_RAIDVOL0_STATUS_STATE_FAILED                (0x02)
-
-typedef struct _RAID_VOL0_SETTINGS
-{
-    U16                         Settings;       /* 00h */
-    U8                          HotSparePool;   /* 01h */ /* MPI_RAID_HOT_SPARE_POOL_ */
-    U8                          Reserved;       /* 02h */
-} RAID_VOL0_SETTINGS, MPI_POINTER PTR_RAID_VOL0_SETTINGS,
-  RaidVol0Settings, MPI_POINTER pRaidVol0Settings;
-
-/* RAID Volume Page 0 VolumeSettings defines */
-
-#define MPI_RAIDVOL0_SETTING_WRITE_CACHING_ENABLE       (0x0001)
-#define MPI_RAIDVOL0_SETTING_OFFLINE_ON_SMART           (0x0002)
-#define MPI_RAIDVOL0_SETTING_AUTO_CONFIGURE             (0x0004)
-#define MPI_RAIDVOL0_SETTING_PRIORITY_RESYNC            (0x0008)
-#define MPI_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX      (0x0010)
-#define MPI_RAIDVOL0_SETTING_USE_DEFAULTS               (0x8000)
-
-/* RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
-#define MPI_RAID_HOT_SPARE_POOL_0                       (0x01)
-#define MPI_RAID_HOT_SPARE_POOL_1                       (0x02)
-#define MPI_RAID_HOT_SPARE_POOL_2                       (0x04)
-#define MPI_RAID_HOT_SPARE_POOL_3                       (0x08)
-#define MPI_RAID_HOT_SPARE_POOL_4                       (0x10)
-#define MPI_RAID_HOT_SPARE_POOL_5                       (0x20)
-#define MPI_RAID_HOT_SPARE_POOL_6                       (0x40)
-#define MPI_RAID_HOT_SPARE_POOL_7                       (0x80)
-
-/*
- * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
- * one and check Header.PageLength at runtime.
- */
-#ifndef MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX
-#define MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX        (1)
-#endif
-
-typedef struct _CONFIG_PAGE_RAID_VOL_0
-{
-    CONFIG_PAGE_HEADER      Header;         /* 00h */
-    U8                      VolumeID;       /* 04h */
-    U8                      VolumeBus;      /* 05h */
-    U8                      VolumeIOC;      /* 06h */
-    U8                      VolumeType;     /* 07h */ /* MPI_RAID_VOL_TYPE_ */
-    RAID_VOL0_STATUS        VolumeStatus;   /* 08h */
-    RAID_VOL0_SETTINGS      VolumeSettings; /* 0Ch */
-    U32                     MaxLBA;         /* 10h */
-    U32                     Reserved1;      /* 14h */
-    U32                     StripeSize;     /* 18h */
-    U32                     Reserved2;      /* 1Ch */
-    U32                     Reserved3;      /* 20h */
-    U8                      NumPhysDisks;   /* 24h */
-    U8                      DataScrubRate;  /* 25h */
-    U8                      ResyncRate;     /* 26h */
-    U8                      InactiveStatus; /* 27h */
-    RAID_VOL0_PHYS_DISK     PhysDisk[MPI_RAID_VOL_PAGE_0_PHYSDISK_MAX];/* 28h */
-} CONFIG_PAGE_RAID_VOL_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_VOL_0,
-  RaidVolumePage0_t, MPI_POINTER pRaidVolumePage0_t;
-
-#define MPI_RAIDVOLPAGE0_PAGEVERSION                    (0x01)
-
-
-/****************************************************************************
-*   RAID Physical Disk Config Pages
-****************************************************************************/
-
-typedef struct _RAID_PHYS_DISK0_ERROR_DATA
-{
-    U8                      ErrorCdbByte;               /* 00h */
-    U8                      ErrorSenseKey;              /* 01h */
-    U16                     Reserved;                   /* 02h */
-    U16                     ErrorCount;                 /* 04h */
-    U8                      ErrorASC;                   /* 06h */
-    U8                      ErrorASCQ;                  /* 07h */
-    U16                     SmartCount;                 /* 08h */
-    U8                      SmartASC;                   /* 0Ah */
-    U8                      SmartASCQ;                  /* 0Bh */
-} RAID_PHYS_DISK0_ERROR_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_ERROR_DATA,
-  RaidPhysDisk0ErrorData_t, MPI_POINTER pRaidPhysDisk0ErrorData_t;
-
-typedef struct _RAID_PHYS_DISK_INQUIRY_DATA
-{
-    U8                          VendorID[8];            /* 00h */
-    U8                          ProductID[16];          /* 08h */
-    U8                          ProductRevLevel[4];     /* 18h */
-    U8                          Info[32];               /* 1Ch */
-} RAID_PHYS_DISK0_INQUIRY_DATA, MPI_POINTER PTR_RAID_PHYS_DISK0_INQUIRY_DATA,
-  RaidPhysDisk0InquiryData, MPI_POINTER pRaidPhysDisk0InquiryData;
-
-typedef struct _RAID_PHYS_DISK0_SETTINGS
-{
-    U8              SepID;              /* 00h */
-    U8              SepBus;             /* 01h */
-    U8              HotSparePool;       /* 02h */ /* MPI_RAID_HOT_SPARE_POOL_ */
-    U8              PhysDiskSettings;   /* 03h */
-} RAID_PHYS_DISK0_SETTINGS, MPI_POINTER PTR_RAID_PHYS_DISK0_SETTINGS,
-  RaidPhysDiskSettings_t, MPI_POINTER pRaidPhysDiskSettings_t;
-
-typedef struct _RAID_PHYS_DISK0_STATUS
-{
-    U8                              Flags;              /* 00h */
-    U8                              State;              /* 01h */
-    U16                             Reserved;           /* 02h */
-} RAID_PHYS_DISK0_STATUS, MPI_POINTER PTR_RAID_PHYS_DISK0_STATUS,
-  RaidPhysDiskStatus_t, MPI_POINTER pRaidPhysDiskStatus_t;
-
-/* RAID Volume 2 IM Physical Disk DiskStatus flags */
-
-#define MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC           (0x01)
-#define MPI_PHYSDISK0_STATUS_FLAG_QUIESCED              (0x02)
-
-#define MPI_PHYSDISK0_STATUS_ONLINE                     (0x00)
-#define MPI_PHYSDISK0_STATUS_MISSING                    (0x01)
-#define MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE             (0x02)
-#define MPI_PHYSDISK0_STATUS_FAILED                     (0x03)
-#define MPI_PHYSDISK0_STATUS_INITIALIZING               (0x04)
-#define MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED          (0x05)
-#define MPI_PHYSDISK0_STATUS_FAILED_REQUESTED           (0x06)
-#define MPI_PHYSDISK0_STATUS_OTHER_OFFLINE              (0xFF)
-
-typedef struct _CONFIG_PAGE_RAID_PHYS_DISK_0
-{
-    CONFIG_PAGE_HEADER              Header;             /* 00h */
-    U8                              PhysDiskID;         /* 04h */
-    U8                              PhysDiskBus;        /* 05h */
-    U8                              PhysDiskIOC;        /* 06h */
-    U8                              PhysDiskNum;        /* 07h */
-    RAID_PHYS_DISK0_SETTINGS        PhysDiskSettings;   /* 08h */
-    U32                             Reserved1;          /* 0Ch */
-    U32                             Reserved2;          /* 10h */
-    U32                             Reserved3;          /* 14h */
-    U8                              DiskIdentifier[16]; /* 18h */
-    RAID_PHYS_DISK0_INQUIRY_DATA    InquiryData;        /* 28h */
-    RAID_PHYS_DISK0_STATUS          PhysDiskStatus;     /* 64h */
-    U32                             MaxLBA;             /* 68h */
-    RAID_PHYS_DISK0_ERROR_DATA      ErrorData;          /* 6Ch */
-} CONFIG_PAGE_RAID_PHYS_DISK_0, MPI_POINTER PTR_CONFIG_PAGE_RAID_PHYS_DISK_0,
-  RaidPhysDiskPage0_t, MPI_POINTER pRaidPhysDiskPage0_t;
-
-#define MPI_RAIDPHYSDISKPAGE0_PAGEVERSION           (0x00)
-
-
-/****************************************************************************
-*   LAN Config Pages
-****************************************************************************/
-
-typedef struct _CONFIG_PAGE_LAN_0
-{
-    ConfigPageHeader_t      Header;                     /* 00h */
-    U16                     TxRxModes;                  /* 04h */
-    U16                     Reserved;                   /* 06h */
-    U32                     PacketPrePad;               /* 08h */
-} CONFIG_PAGE_LAN_0, MPI_POINTER PTR_CONFIG_PAGE_LAN_0,
-  LANPage0_t, MPI_POINTER pLANPage0_t;
-
-#define MPI_LAN_PAGE0_PAGEVERSION                       (0x01)
-
-#define MPI_LAN_PAGE0_RETURN_LOOPBACK                   (0x0000)
-#define MPI_LAN_PAGE0_SUPPRESS_LOOPBACK                 (0x0001)
-#define MPI_LAN_PAGE0_LOOPBACK_MASK                     (0x0001)
-
-typedef struct _CONFIG_PAGE_LAN_1
-{
-    ConfigPageHeader_t      Header;                     /* 00h */
-    U16                     Reserved;                   /* 04h */
-    U8                      CurrentDeviceState;         /* 06h */
-    U8                      Reserved1;                  /* 07h */
-    U32                     MinPacketSize;              /* 08h */
-    U32                     MaxPacketSize;              /* 0Ch */
-    U32                     HardwareAddressLow;         /* 10h */
-    U32                     HardwareAddressHigh;        /* 14h */
-    U32                     MaxWireSpeedLow;            /* 18h */
-    U32                     MaxWireSpeedHigh;           /* 1Ch */
-    U32                     BucketsRemaining;           /* 20h */
-    U32                     MaxReplySize;               /* 24h */
-    U32                     NegWireSpeedLow;            /* 28h */
-    U32                     NegWireSpeedHigh;           /* 2Ch */
-} CONFIG_PAGE_LAN_1, MPI_POINTER PTR_CONFIG_PAGE_LAN_1,
-  LANPage1_t, MPI_POINTER pLANPage1_t;
-
-#define MPI_LAN_PAGE1_PAGEVERSION                       (0x03)
-
-#define MPI_LAN_PAGE1_DEV_STATE_RESET                   (0x00)
-#define MPI_LAN_PAGE1_DEV_STATE_OPERATIONAL             (0x01)
-
-#endif
-
-/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_fc.h,v 1.5 2005/07/10 15:05:39 scottl Exp $ */
-/*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon including
- *    a substantially similar Disclaimer requirement for further binary
- *    redistribution.
- * 3. Neither the name of the LSI Logic Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
- * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- *           Name:  MPI_FC.H
- *          Title:  MPI Fibre Channel messages and structures
- *  Creation Date:  June 12, 2000
- *
- *    MPI_FC.H Version:  01.02.04
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  05-08-00  00.10.01  Original release for 0.10 spec dated 4/26/2000.
- *  06-06-00  01.00.01  Update version number for 1.0 release.
- *  06-12-00  01.00.02  Added _MSG_FC_ABORT_REPLY structure.
- *  11-02-00  01.01.01  Original release for post 1.0 work
- *  12-04-00  01.01.02  Added messages for Common Transport Send and
- *                      Primitive Send.
- *  01-09-01  01.01.03  Modifed some of the new flags to have an MPI prefix
- *                      and modified the FcPrimitiveSend flags.
- *  01-25-01  01.01.04  Move InitiatorIndex in LinkServiceRsp reply to a larger
- *                      field.
- *                      Added FC_ABORT_TYPE_CT_SEND_REQUEST and
- *                      FC_ABORT_TYPE_EXLINKSEND_REQUEST for FcAbort request.
- *                      Added MPI_FC_PRIM_SEND_FLAGS_STOP_SEND.
- *  02-20-01  01.01.05  Started using MPI_POINTER.
- *  03-27-01  01.01.06  Added Flags field to MSG_LINK_SERVICE_BUFFER_POST_REPLY
- *                      and defined MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED.
- *                      Added MPI_FC_PRIM_SEND_FLAGS_RESET_LINK define.
- *                      Added structure offset comments.
- *  04-09-01  01.01.07  Added RspLength field to MSG_LINK_SERVICE_RSP_REQUEST.
- *  08-08-01  01.02.01  Original release for v1.2 work.
- *  09-28-01  01.02.02  Change name of reserved field in
- *                      MSG_LINK_SERVICE_RSP_REPLY.
- *  05-31-02  01.02.03  Adding AliasIndex to FC Direct Access requests.
- *  01-16-04  01.02.04  Added define for MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI_FC_H
-#define MPI_FC_H
-
-
-/*****************************************************************************
-*
-*        F C    T a r g e t    M o d e    M e s s a g e s
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/* Link Service Buffer Post messages                                        */
-/****************************************************************************/
-
-typedef struct _MSG_LINK_SERVICE_BUFFER_POST_REQUEST
-{
-    U8                      BufferPostFlags;    /* 00h */
-    U8                      BufferCount;        /* 01h */
-    U8                      ChainOffset;        /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved;           /* 04h */
-    U8                      Reserved1;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    SGE_TRANS_SIMPLE_UNION  SGL;
-} MSG_LINK_SERVICE_BUFFER_POST_REQUEST,
- MPI_POINTER PTR_MSG_LINK_SERVICE_BUFFER_POST_REQUEST,
-  LinkServiceBufferPostRequest_t, MPI_POINTER pLinkServiceBufferPostRequest_t;
-
-#define LINK_SERVICE_BUFFER_POST_FLAGS_PORT_MASK (0x01)
-
-typedef struct _WWNFORMAT
-{
-    U32                     PortNameHigh;       /* 00h */
-    U32                     PortNameLow;        /* 04h */
-    U32                     NodeNameHigh;       /* 08h */
-    U32                     NodeNameLow;        /* 0Ch */
-} WWNFORMAT,
-  WwnFormat_t;
-
-/* Link Service Buffer Post Reply */
-typedef struct _MSG_LINK_SERVICE_BUFFER_POST_REPLY
-{
-    U8                      Flags;              /* 00h */
-    U8                      Reserved;           /* 01h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved1;          /* 04h */
-    U8                      PortNumber;         /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U16                     Reserved2;          /* 0Ch */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-    U32                     TransferLength;     /* 14h */
-    U32                     TransactionContext; /* 18h */
-    U32                     Rctl_Did;           /* 1Ch */
-    U32                     Csctl_Sid;          /* 20h */
-    U32                     Type_Fctl;          /* 24h */
-    U16                     SeqCnt;             /* 28h */
-    U8                      Dfctl;              /* 2Ah */
-    U8                      SeqId;              /* 2Bh */
-    U16                     Rxid;               /* 2Ch */
-    U16                     Oxid;               /* 2Eh */
-    U32                     Parameter;          /* 30h */
-    WWNFORMAT               Wwn;                /* 34h */
-} MSG_LINK_SERVICE_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_LINK_SERVICE_BUFFER_POST_REPLY,
-  LinkServiceBufferPostReply_t, MPI_POINTER pLinkServiceBufferPostReply_t;
-
-#define MPI_LS_BUF_POST_REPLY_FLAG_NO_RSP_NEEDED    (0x80)
-
-#define MPI_FC_DID_MASK                             (0x00FFFFFF)
-#define MPI_FC_DID_SHIFT                            (0)
-#define MPI_FC_RCTL_MASK                            (0xFF000000)
-#define MPI_FC_RCTL_SHIFT                           (24)
-#define MPI_FC_SID_MASK                             (0x00FFFFFF)
-#define MPI_FC_SID_SHIFT                            (0)
-#define MPI_FC_CSCTL_MASK                           (0xFF000000)
-#define MPI_FC_CSCTL_SHIFT                          (24)
-#define MPI_FC_FCTL_MASK                            (0x00FFFFFF)
-#define MPI_FC_FCTL_SHIFT                           (0)
-#define MPI_FC_TYPE_MASK                            (0xFF000000)
-#define MPI_FC_TYPE_SHIFT                           (24)
-
-/* obsolete name for the above */
-#define FCP_TARGET_DID_MASK                         (0x00FFFFFF)
-#define FCP_TARGET_DID_SHIFT                        (0)
-#define FCP_TARGET_RCTL_MASK                        (0xFF000000)
-#define FCP_TARGET_RCTL_SHIFT                       (24)
-#define FCP_TARGET_SID_MASK                         (0x00FFFFFF)
-#define FCP_TARGET_SID_SHIFT                        (0)
-#define FCP_TARGET_CSCTL_MASK                       (0xFF000000)
-#define FCP_TARGET_CSCTL_SHIFT                      (24)
-#define FCP_TARGET_FCTL_MASK                        (0x00FFFFFF)
-#define FCP_TARGET_FCTL_SHIFT                       (0)
-#define FCP_TARGET_TYPE_MASK                        (0xFF000000)
-#define FCP_TARGET_TYPE_SHIFT                       (24)
-
-
-/****************************************************************************/
-/* Link Service Response messages                                           */
-/****************************************************************************/
-
-typedef struct _MSG_LINK_SERVICE_RSP_REQUEST
-{
-    U8                      RspFlags;           /* 00h */
-    U8                      RspLength;          /* 01h */
-    U8                      ChainOffset;        /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved1;          /* 04h */
-    U8                      Reserved2;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U32                     Rctl_Did;           /* 0Ch */
-    U32                     Csctl_Sid;          /* 10h */
-    U32                     Type_Fctl;          /* 14h */
-    U16                     SeqCnt;             /* 18h */
-    U8                      Dfctl;              /* 1Ah */
-    U8                      SeqId;              /* 1Bh */
-    U16                     Rxid;               /* 1Ch */
-    U16                     Oxid;               /* 1Eh */
-    U32                     Parameter;          /* 20h */
-    SGE_SIMPLE_UNION        SGL;                /* 24h */
-} MSG_LINK_SERVICE_RSP_REQUEST, MPI_POINTER PTR_MSG_LINK_SERVICE_RSP_REQUEST,
-  LinkServiceRspRequest_t, MPI_POINTER pLinkServiceRspRequest_t;
-
-#define LINK_SERVICE_RSP_FLAGS_IMMEDIATE        (0x80)
-#define LINK_SERVICE_RSP_FLAGS_PORT_MASK        (0x01)
-
-
-/* Link Service Response Reply  */
-typedef struct _MSG_LINK_SERVICE_RSP_REPLY
-{
-    U16                     Reserved;           /* 00h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved1;          /* 04h */
-    U8                      Reserved_0100_InitiatorIndex; /* 06h */ /* obsolete InitiatorIndex */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U16                     Reserved3;          /* 0Ch */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-    U32                     InitiatorIndex;     /* 14h */
-} MSG_LINK_SERVICE_RSP_REPLY, MPI_POINTER PTR_MSG_LINK_SERVICE_RSP_REPLY,
-  LinkServiceRspReply_t, MPI_POINTER pLinkServiceRspReply_t;
-
-
-/****************************************************************************/
-/* Extended Link Service Send messages                                      */
-/****************************************************************************/
-
-typedef struct _MSG_EXLINK_SERVICE_SEND_REQUEST
-{
-    U8                      SendFlags;          /* 00h */
-    U8                      AliasIndex;         /* 01h */
-    U8                      ChainOffset;        /* 02h */
-    U8                      Function;           /* 03h */
-    U32                     MsgFlags_Did;       /* 04h */
-    U32                     MsgContext;         /* 08h */
-    U32                     ElsCommandCode;     /* 0Ch */
-    SGE_SIMPLE_UNION        SGL;                /* 10h */
-} MSG_EXLINK_SERVICE_SEND_REQUEST, MPI_POINTER PTR_MSG_EXLINK_SERVICE_SEND_REQUEST,
-  ExLinkServiceSendRequest_t, MPI_POINTER pExLinkServiceSendRequest_t;
-
-#define EX_LINK_SERVICE_SEND_DID_MASK           (0x00FFFFFF)
-#define EX_LINK_SERVICE_SEND_DID_SHIFT          (0)
-#define EX_LINK_SERVICE_SEND_MSGFLAGS_MASK      (0xFF000000)
-#define EX_LINK_SERVICE_SEND_MSGFLAGS_SHIFT     (24)
-
-
-/* Extended Link Service Send Reply */
-typedef struct _MSG_EXLINK_SERVICE_SEND_REPLY
-{
-    U8                      Reserved;           /* 00h */
-    U8                      AliasIndex;         /* 01h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved1;          /* 04h */
-    U8                      Reserved2;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U16                     Reserved3;          /* 0Ch */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-    U32                     ResponseLength;     /* 14h */
-} MSG_EXLINK_SERVICE_SEND_REPLY, MPI_POINTER PTR_MSG_EXLINK_SERVICE_SEND_REPLY,
-  ExLinkServiceSendReply_t, MPI_POINTER pExLinkServiceSendReply_t;
-
-/****************************************************************************/
-/* FC Abort messages                                                        */
-/****************************************************************************/
-
-typedef struct _MSG_FC_ABORT_REQUEST
-{
-    U8                      AbortFlags;                 /* 00h */
-    U8                      AbortType;                  /* 01h */
-    U8                      ChainOffset;                /* 02h */
-    U8                      Function;                   /* 03h */
-    U16                     Reserved1;                  /* 04h */
-    U8                      Reserved2;                  /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U32                     TransactionContextToAbort;  /* 0Ch */
-} MSG_FC_ABORT_REQUEST, MPI_POINTER PTR_MSG_FC_ABORT_REQUEST,
-  FcAbortRequest_t, MPI_POINTER pFcAbortRequest_t;
-
-#define FC_ABORT_FLAG_PORT_MASK                 (0x01)
-
-#define FC_ABORT_TYPE_ALL_FC_BUFFERS            (0x00)
-#define FC_ABORT_TYPE_EXACT_FC_BUFFER           (0x01)
-#define FC_ABORT_TYPE_CT_SEND_REQUEST           (0x02)
-#define FC_ABORT_TYPE_EXLINKSEND_REQUEST        (0x03)
-
-/* FC Abort Reply */
-typedef struct _MSG_FC_ABORT_REPLY
-{
-    U16                     Reserved;           /* 00h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved1;          /* 04h */
-    U8                      Reserved2;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U16                     Reserved3;          /* 0Ch */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-} MSG_FC_ABORT_REPLY, MPI_POINTER PTR_MSG_FC_ABORT_REPLY,
-  FcAbortReply_t, MPI_POINTER pFcAbortReply_t;
-
-
-/****************************************************************************/
-/* FC Common Transport Send messages                                        */
-/****************************************************************************/
-
-typedef struct _MSG_FC_COMMON_TRANSPORT_SEND_REQUEST
-{
-    U8                      SendFlags;          /* 00h */
-    U8                      AliasIndex;         /* 01h */
-    U8                      ChainOffset;        /* 02h */
-    U8                      Function;           /* 03h */
-    U32                     MsgFlags_Did;       /* 04h */
-    U32                     MsgContext;         /* 08h */
-    U16                     CTCommandCode;      /* 0Ch */
-    U8                      FsType;             /* 0Eh */
-    U8                      Reserved1;          /* 0Fh */
-    SGE_SIMPLE_UNION        SGL;                /* 10h */
-} MSG_FC_COMMON_TRANSPORT_SEND_REQUEST,
- MPI_POINTER PTR_MSG_FC_COMMON_TRANSPORT_SEND_REQUEST,
-  FcCommonTransportSendRequest_t, MPI_POINTER pFcCommonTransportSendRequest_t;
-
-#define MPI_FC_CT_SEND_DID_MASK                 (0x00FFFFFF)
-#define MPI_FC_CT_SEND_DID_SHIFT                (0)
-#define MPI_FC_CT_SEND_MSGFLAGS_MASK            (0xFF000000)
-#define MPI_FC_CT_SEND_MSGFLAGS_SHIFT           (24)
-
-
-/* FC Common Transport Send Reply */
-typedef struct _MSG_FC_COMMON_TRANSPORT_SEND_REPLY
-{
-    U8                      Reserved;           /* 00h */
-    U8                      AliasIndex;         /* 01h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved1;          /* 04h */
-    U8                      Reserved2;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U16                     Reserved3;          /* 0Ch */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-    U32                     ResponseLength;     /* 14h */
-} MSG_FC_COMMON_TRANSPORT_SEND_REPLY, MPI_POINTER PTR_MSG_FC_COMMON_TRANSPORT_SEND_REPLY,
-  FcCommonTransportSendReply_t, MPI_POINTER pFcCommonTransportSendReply_t;
-
-
-/****************************************************************************/
-/* FC Primitive Send messages                                               */
-/****************************************************************************/
-
-typedef struct _MSG_FC_PRIMITIVE_SEND_REQUEST
-{
-    U8                      SendFlags;          /* 00h */
-    U8                      Reserved;           /* 01h */
-    U8                      ChainOffset;        /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved1;          /* 04h */
-    U8                      Reserved2;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U8                      FcPrimitive[4];     /* 0Ch */
-} MSG_FC_PRIMITIVE_SEND_REQUEST, MPI_POINTER PTR_MSG_FC_PRIMITIVE_SEND_REQUEST,
-  FcPrimitiveSendRequest_t, MPI_POINTER pFcPrimitiveSendRequest_t;
-
-#define MPI_FC_PRIM_SEND_FLAGS_PORT_MASK       (0x01)
-#define MPI_FC_PRIM_SEND_FLAGS_ML_RESET_LINK   (0x02)
-#define MPI_FC_PRIM_SEND_FLAGS_RESET_LINK      (0x04)
-#define MPI_FC_PRIM_SEND_FLAGS_STOP_SEND       (0x08)
-#define MPI_FC_PRIM_SEND_FLAGS_SEND_ONCE       (0x10)
-#define MPI_FC_PRIM_SEND_FLAGS_SEND_AROUND     (0x20)
-#define MPI_FC_PRIM_SEND_FLAGS_UNTIL_FULL      (0x40)
-#define MPI_FC_PRIM_SEND_FLAGS_FOREVER         (0x80)
-
-/* FC Primitive Send Reply */
-typedef struct _MSG_FC_PRIMITIVE_SEND_REPLY
-{
-    U8                      SendFlags;          /* 00h */
-    U8                      Reserved;           /* 01h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved1;          /* 04h */
-    U8                      Reserved2;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U16                     Reserved3;          /* 0Ch */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-} MSG_FC_PRIMITIVE_SEND_REPLY, MPI_POINTER PTR_MSG_FC_PRIMITIVE_SEND_REPLY,
-  FcPrimitiveSendReply_t, MPI_POINTER pFcPrimitiveSendReply_t;
-
-#endif
-
-/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_init.h,v 1.6 2005/07/10 15:05:39 scottl Exp $ */
-/*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon including
- *    a substantially similar Disclaimer requirement for further binary
- *    redistribution.
- * 3. Neither the name of the LSI Logic Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
- * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- *           Name:  MPI_INIT.H
- *          Title:  MPI initiator mode messages and structures
- *  Creation Date:  June 8, 2000
- *
- *    MPI_INIT.H Version:  01.02.07
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  05-08-00  00.10.01  Original release for 0.10 spec dated 4/26/2000.
- *  05-24-00  00.10.02  Added SenseBufferLength to _MSG_SCSI_IO_REPLY.
- *  06-06-00  01.00.01  Update version number for 1.0 release.
- *  06-08-00  01.00.02  Added MPI_SCSI_RSP_INFO_ definitions.
- *  11-02-00  01.01.01  Original release for post 1.0 work.
- *  12-04-00  01.01.02  Added MPI_SCSIIO_CONTROL_NO_DISCONNECT.
- *  02-20-01  01.01.03  Started using MPI_POINTER.
- *  03-27-01  01.01.04  Added structure offset comments.
- *  04-10-01  01.01.05  Added new MsgFlag for MSG_SCSI_TASK_MGMT.
- *  08-08-01  01.02.01  Original release for v1.2 work.
- *  08-29-01  01.02.02  Added MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET.
- *                      Added MPI_SCSI_STATE_QUEUE_TAG_REJECTED for
- *                      MSG_SCSI_IO_REPLY.
- *  09-28-01  01.02.03  Added structures and defines for SCSI Enclosure
- *                      Processor messages.
- *  10-04-01  01.02.04  Added defines for SEP request Action field.
- *  05-31-02  01.02.05  Added MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR define
- *                      for SCSI IO requests.
- *  11-15-02  01.02.06  Added special extended SCSI Status defines for FCP.
- *  06-26-03  01.02.07  Added MPI_SCSI_STATUS_FCPEXT_UNASSIGNED define.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI_INIT_H
-#define MPI_INIT_H
-
-
-/*****************************************************************************
-*
-*               S C S I    I n i t i a t o r    M e s s a g e s
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/*  SCSI IO messages and assocaited structures                              */
-/****************************************************************************/
-
-typedef struct _MSG_SCSI_IO_REQUEST
-{
-    U8                      TargetID;           /* 00h */
-    U8                      Bus;                /* 01h */
-    U8                      ChainOffset;        /* 02h */
-    U8                      Function;           /* 03h */
-    U8                      CDBLength;          /* 04h */
-    U8                      SenseBufferLength;  /* 05h */
-    U8                      Reserved;           /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U8                      LUN[8];             /* 0Ch */
-    U32                     Control;            /* 14h */
-    U8                      CDB[16];            /* 18h */
-    U32                     DataLength;         /* 28h */
-    U32                     SenseBufferLowAddr; /* 2Ch */
-    SGE_IO_UNION            SGL;                /* 30h */
-} MSG_SCSI_IO_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_REQUEST,
-  SCSIIORequest_t, MPI_POINTER pSCSIIORequest_t;
-
-
-/* SCSI IO MsgFlags bits */
-
-#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH              (0x01)
-#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_32           (0x00)
-#define MPI_SCSIIO_MSGFLGS_SENSE_WIDTH_64           (0x01)
-#define MPI_SCSIIO_MSGFLGS_SENSE_LOCATION           (0x02)
-#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_HOST           (0x00)
-#define MPI_SCSIIO_MSGFLGS_SENSE_LOC_IOC            (0x02)
-#define MPI_SCSIIO_MSGFLGS_CMD_DETERMINES_DATA_DIR  (0x04)
-
-/* SCSI IO LUN fields */
-
-#define MPI_SCSIIO_LUN_FIRST_LEVEL_ADDRESSING   (0x0000FFFF)
-#define MPI_SCSIIO_LUN_SECOND_LEVEL_ADDRESSING  (0xFFFF0000)
-#define MPI_SCSIIO_LUN_THIRD_LEVEL_ADDRESSING   (0x0000FFFF)
-#define MPI_SCSIIO_LUN_FOURTH_LEVEL_ADDRESSING  (0xFFFF0000)
-#define MPI_SCSIIO_LUN_LEVEL_1_WORD             (0xFF00)
-#define MPI_SCSIIO_LUN_LEVEL_1_DWORD            (0x0000FF00)
-
-/* SCSI IO Control bits */
-
-#define MPI_SCSIIO_CONTROL_DATADIRECTION_MASK   (0x03000000)
-#define MPI_SCSIIO_CONTROL_NODATATRANSFER       (0x00000000)
-#define MPI_SCSIIO_CONTROL_WRITE                (0x01000000)
-#define MPI_SCSIIO_CONTROL_READ                 (0x02000000)
-
-#define MPI_SCSIIO_CONTROL_ADDCDBLEN_MASK       (0x3C000000)
-#define MPI_SCSIIO_CONTROL_ADDCDBLEN_SHIFT      (26)
-
-#define MPI_SCSIIO_CONTROL_TASKATTRIBUTE_MASK   (0x00000700)
-#define MPI_SCSIIO_CONTROL_SIMPLEQ              (0x00000000)
-#define MPI_SCSIIO_CONTROL_HEADOFQ              (0x00000100)
-#define MPI_SCSIIO_CONTROL_ORDEREDQ             (0x00000200)
-#define MPI_SCSIIO_CONTROL_ACAQ                 (0x00000400)
-#define MPI_SCSIIO_CONTROL_UNTAGGED             (0x00000500)
-#define MPI_SCSIIO_CONTROL_NO_DISCONNECT        (0x00000700)
-
-#define MPI_SCSIIO_CONTROL_TASKMANAGE_MASK      (0x00FF0000)
-#define MPI_SCSIIO_CONTROL_OBSOLETE             (0x00800000)
-#define MPI_SCSIIO_CONTROL_CLEAR_ACA_RSV        (0x00400000)
-#define MPI_SCSIIO_CONTROL_TARGET_RESET         (0x00200000)
-#define MPI_SCSIIO_CONTROL_LUN_RESET_RSV        (0x00100000)
-#define MPI_SCSIIO_CONTROL_RESERVED             (0x00080000)
-#define MPI_SCSIIO_CONTROL_CLR_TASK_SET_RSV     (0x00040000)
-#define MPI_SCSIIO_CONTROL_ABORT_TASK_SET       (0x00020000)
-#define MPI_SCSIIO_CONTROL_RESERVED2            (0x00010000)
-
-
-/* SCSI IO reply structure */
-typedef struct _MSG_SCSI_IO_REPLY
-{
-    U8                      TargetID;           /* 00h */
-    U8                      Bus;                /* 01h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U8                      CDBLength;          /* 04h */
-    U8                      SenseBufferLength;  /* 05h */
-    U8                      Reserved;           /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U8                      SCSIStatus;         /* 0Ch */
-    U8                      SCSIState;          /* 0Dh */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-    U32                     TransferCount;      /* 14h */
-    U32                     SenseCount;         /* 18h */
-    U32                     ResponseInfo;       /* 1Ch */
-} MSG_SCSI_IO_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_REPLY,
-  SCSIIOReply_t, MPI_POINTER pSCSIIOReply_t;
-
-
-/* SCSI IO Reply SCSIStatus values (SAM-2 status codes) */
-
-#define MPI_SCSI_STATUS_SUCCESS                 (0x00)
-#define MPI_SCSI_STATUS_CHECK_CONDITION         (0x02)
-#define MPI_SCSI_STATUS_CONDITION_MET           (0x04)
-#define MPI_SCSI_STATUS_BUSY                    (0x08)
-#define MPI_SCSI_STATUS_INTERMEDIATE            (0x10)
-#define MPI_SCSI_STATUS_INTERMEDIATE_CONDMET    (0x14)
-#define MPI_SCSI_STATUS_RESERVATION_CONFLICT    (0x18)
-#define MPI_SCSI_STATUS_COMMAND_TERMINATED      (0x22)
-#define MPI_SCSI_STATUS_TASK_SET_FULL           (0x28)
-#define MPI_SCSI_STATUS_ACA_ACTIVE              (0x30)
-
-#define MPI_SCSI_STATUS_FCPEXT_DEVICE_LOGGED_OUT    (0x80)
-#define MPI_SCSI_STATUS_FCPEXT_NO_LINK              (0x81)
-#define MPI_SCSI_STATUS_FCPEXT_UNASSIGNED           (0x82)
-
-
-/* SCSI IO Reply SCSIState values */
-
-#define MPI_SCSI_STATE_AUTOSENSE_VALID          (0x01)
-#define MPI_SCSI_STATE_AUTOSENSE_FAILED         (0x02)
-#define MPI_SCSI_STATE_NO_SCSI_STATUS           (0x04)
-#define MPI_SCSI_STATE_TERMINATED               (0x08)
-#define MPI_SCSI_STATE_RESPONSE_INFO_VALID      (0x10)
-#define MPI_SCSI_STATE_QUEUE_TAG_REJECTED       (0x20)
-
-/* SCSI IO Reply ResponseInfo values */
-/* (FCP-1 RSP_CODE values and SPI-3 Packetized Failure codes) */
-
-#define MPI_SCSI_RSP_INFO_FUNCTION_COMPLETE     (0x00000000)
-#define MPI_SCSI_RSP_INFO_FCP_BURST_LEN_ERROR   (0x01000000)
-#define MPI_SCSI_RSP_INFO_CMND_FIELDS_INVALID   (0x02000000)
-#define MPI_SCSI_RSP_INFO_FCP_DATA_RO_ERROR     (0x03000000)
-#define MPI_SCSI_RSP_INFO_TASK_MGMT_UNSUPPORTED (0x04000000)
-#define MPI_SCSI_RSP_INFO_TASK_MGMT_FAILED      (0x05000000)
-#define MPI_SCSI_RSP_INFO_SPI_LQ_INVALID_TYPE   (0x06000000)
-
-
-/****************************************************************************/
-/*  SCSI Task Management messages                                           */
-/****************************************************************************/
-
-typedef struct _MSG_SCSI_TASK_MGMT
-{
-    U8                      TargetID;           /* 00h */
-    U8                      Bus;                /* 01h */
-    U8                      ChainOffset;        /* 02h */
-    U8                      Function;           /* 03h */
-    U8                      Reserved;           /* 04h */
-    U8                      TaskType;           /* 05h */
-    U8                      Reserved1;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U8                      LUN[8];             /* 0Ch */
-    U32                     Reserved2[7];       /* 14h */
-    U32                     TaskMsgContext;     /* 30h */
-} MSG_SCSI_TASK_MGMT, MPI_POINTER PTR_SCSI_TASK_MGMT,
-  SCSITaskMgmt_t, MPI_POINTER pSCSITaskMgmt_t;
-
-/* TaskType values */
-
-#define MPI_SCSITASKMGMT_TASKTYPE_ABORT_TASK            (0x01)
-#define MPI_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET         (0x02)
-#define MPI_SCSITASKMGMT_TASKTYPE_TARGET_RESET          (0x03)
-#define MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS             (0x04)
-#define MPI_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET    (0x05)
-
-/* MsgFlags bits */
-#define MPI_SCSITASKMGMT_MSGFLAGS_TARGET_RESET_OPTION   (0x00)
-#define MPI_SCSITASKMGMT_MSGFLAGS_LIP_RESET_OPTION      (0x02)
-#define MPI_SCSITASKMGMT_MSGFLAGS_LIPRESET_RESET_OPTION (0x04)
-
-/* SCSI Task Management Reply */
-typedef struct _MSG_SCSI_TASK_MGMT_REPLY
-{
-    U8                      TargetID;           /* 00h */
-    U8                      Bus;                /* 01h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U8                      Reserved;           /* 04h */
-    U8                      TaskType;           /* 05h */
-    U8                      Reserved1;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U8                      Reserved2[2];       /* 0Ch */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-    U32                     TerminationCount;   /* 14h */
-} MSG_SCSI_TASK_MGMT_REPLY, MPI_POINTER PTR_MSG_SCSI_TASK_MGMT_REPLY,
-  SCSITaskMgmtReply_t, MPI_POINTER pSCSITaskMgmtReply_t;
-
-
-/****************************************************************************/
-/*  SCSI Enclosure Processor messages                                       */
-/****************************************************************************/
-
-typedef struct _MSG_SEP_REQUEST
-{
-    U8                      TargetID;           /* 00h */
-    U8                      Bus;                /* 01h */
-    U8                      ChainOffset;        /* 02h */
-    U8                      Function;           /* 03h */
-    U8                      Action;             /* 04h */
-    U8                      Reserved1;          /* 05h */
-    U8                      Reserved2;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U32                     SlotStatus;         /* 0Ch */
-} MSG_SEP_REQUEST, MPI_POINTER PTR_MSG_SEP_REQUEST,
-  SEPRequest_t, MPI_POINTER pSEPRequest_t;
-
-/* Action defines */
-#define MPI_SEP_REQ_ACTION_WRITE_STATUS                 (0x00)
-#define MPI_SEP_REQ_ACTION_READ_STATUS                  (0x01)
-
-/* SlotStatus bits for MSG_SEP_REQUEST */
-#define MPI_SEP_REQ_SLOTSTATUS_NO_ERROR                 (0x00000001)
-#define MPI_SEP_REQ_SLOTSTATUS_DEV_FAULTY               (0x00000002)
-#define MPI_SEP_REQ_SLOTSTATUS_DEV_REBUILDING           (0x00000004)
-#define MPI_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY          (0x00000008)
-#define MPI_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY        (0x00000010)
-#define MPI_SEP_REQ_SLOTSTATUS_PARITY_CHECK             (0x00000020)
-#define MPI_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT          (0x00000040)
-#define MPI_SEP_REQ_SLOTSTATUS_UNCONFIGURED             (0x00000080)
-#define MPI_SEP_REQ_SLOTSTATUS_HOT_SPARE                (0x00000100)
-#define MPI_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED          (0x00000200)
-#define MPI_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST         (0x00020000)
-#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE           (0x00040000)
-#define MPI_SEP_REQ_SLOTSTATUS_REQUEST_INSERT           (0x00080000)
-#define MPI_SEP_REQ_SLOTSTATUS_DO_NOT_MOVE              (0x00400000)
-#define MPI_SEP_REQ_SLOTSTATUS_B_ENABLE_BYPASS          (0x04000000)
-#define MPI_SEP_REQ_SLOTSTATUS_A_ENABLE_BYPASS          (0x08000000)
-#define MPI_SEP_REQ_SLOTSTATUS_DEV_OFF                  (0x10000000)
-#define MPI_SEP_REQ_SLOTSTATUS_SWAP_RESET               (0x80000000)
-
-
-typedef struct _MSG_SEP_REPLY
-{
-    U8                      TargetID;           /* 00h */
-    U8                      Bus;                /* 01h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U8                      Action;             /* 04h */
-    U8                      Reserved1;          /* 05h */
-    U8                      Reserved2;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U16                     Reserved3;          /* 0Ch */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-    U32                     SlotStatus;         /* 14h */
-} MSG_SEP_REPLY, MPI_POINTER PTR_MSG_SEP_REPLY,
-  SEPReply_t, MPI_POINTER pSEPReply_t;
-
-/* SlotStatus bits for MSG_SEP_REPLY */
-#define MPI_SEP_REPLY_SLOTSTATUS_NO_ERROR               (0x00000001)
-#define MPI_SEP_REPLY_SLOTSTATUS_DEV_FAULTY             (0x00000002)
-#define MPI_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING         (0x00000004)
-#define MPI_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY        (0x00000008)
-#define MPI_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY      (0x00000010)
-#define MPI_SEP_REPLY_SLOTSTATUS_PARITY_CHECK           (0x00000020)
-#define MPI_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT        (0x00000040)
-#define MPI_SEP_REPLY_SLOTSTATUS_UNCONFIGURED           (0x00000080)
-#define MPI_SEP_REPLY_SLOTSTATUS_HOT_SPARE              (0x00000100)
-#define MPI_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED        (0x00000200)
-#define MPI_SEP_REPLY_SLOTSTATUS_REPORT                 (0x00010000)
-#define MPI_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST       (0x00020000)
-#define MPI_SEP_REPLY_SLOTSTATUS_REMOVE_READY           (0x00040000)
-#define MPI_SEP_REPLY_SLOTSTATUS_INSERT_READY           (0x00080000)
-#define MPI_SEP_REPLY_SLOTSTATUS_DO_NOT_REMOVE          (0x00400000)
-#define MPI_SEP_REPLY_SLOTSTATUS_B_BYPASS_ENABLED       (0x01000000)
-#define MPI_SEP_REPLY_SLOTSTATUS_A_BYPASS_ENABLED       (0x02000000)
-#define MPI_SEP_REPLY_SLOTSTATUS_B_ENABLE_BYPASS        (0x04000000)
-#define MPI_SEP_REPLY_SLOTSTATUS_A_ENABLE_BYPASS        (0x08000000)
-#define MPI_SEP_REPLY_SLOTSTATUS_DEV_OFF                (0x10000000)
-#define MPI_SEP_REPLY_SLOTSTATUS_FAULT_SENSED           (0x40000000)
-#define MPI_SEP_REPLY_SLOTSTATUS_SWAPPED                (0x80000000)
-
-#endif
-/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_ioc.h,v 1.6 2005/07/10 15:05:39 scottl Exp $ */
-/*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon including
- *    a substantially similar Disclaimer requirement for further binary
- *    redistribution.
- * 3. Neither the name of the LSI Logic Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
- * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- *           Name:  MPI_IOC.H
- *          Title:  MPI IOC, Port, Event, FW Download, and FW Upload messages
- *  Creation Date:  August 11, 2000
- *
- *    MPI_IOC.H Version:  01.02.08
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  05-08-00  00.10.01  Original release for 0.10 spec dated 4/26/2000.
- *  05-24-00  00.10.02  Added _MSG_IOC_INIT_REPLY structure.
- *  06-06-00  01.00.01  Added CurReplyFrameSize field to _MSG_IOC_FACTS_REPLY.
- *  06-12-00  01.00.02  Added _MSG_PORT_ENABLE_REPLY structure.
- *                      Added _MSG_EVENT_ACK_REPLY structure.
- *                      Added _MSG_FW_DOWNLOAD_REPLY structure.
- *                      Added _MSG_TOOLBOX_REPLY structure.
- *  06-30-00  01.00.03  Added MaxLanBuckets to _PORT_FACT_REPLY structure.
- *  07-27-00  01.00.04  Added _EVENT_DATA structure definitions for _SCSI,
- *                      _LINK_STATUS, _LOOP_STATE and _LOGOUT.
- *  08-11-00  01.00.05  Switched positions of MsgLength and Function fields in
- *                      _MSG_EVENT_ACK_REPLY structure to match specification.
- *  11-02-00  01.01.01  Original release for post 1.0 work.
- *                      Added a value for Manufacturer to WhoInit.
- *  12-04-00  01.01.02  Modified IOCFacts reply, added FWUpload messages, and
- *                      removed toolbox message.
- *  01-09-01  01.01.03  Added event enabled and disabled defines.
- *                      Added structures for FwHeader and DataHeader.
- *                      Added ImageType to FwUpload reply.
- *  02-20-01  01.01.04  Started using MPI_POINTER.
- *  02-27-01  01.01.05  Added event for RAID status change and its event data.
- *                      Added IocNumber field to MSG_IOC_FACTS_REPLY.
- *  03-27-01  01.01.06  Added defines for ProductId field of MPI_FW_HEADER.
- *                      Added structure offset comments.
- *  04-09-01  01.01.07  Added structure EVENT_DATA_EVENT_CHANGE.
- *  08-08-01  01.02.01  Original release for v1.2 work.
- *                      New format for FWVersion and ProductId in
- *                      MSG_IOC_FACTS_REPLY and MPI_FW_HEADER.
- *  08-31-01  01.02.02  Addded event MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE and
- *                      related structure and defines.
- *                      Added event MPI_EVENT_ON_BUS_TIMER_EXPIRED.
- *                      Added MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE.
- *                      Replaced a reserved field in MSG_IOC_FACTS_REPLY with
- *                      IOCExceptions and changed DataImageSize to reserved.
- *                      Added MPI_FW_DOWNLOAD_ITYPE_NVSTORE_DATA and
- *                      MPI_FW_UPLOAD_ITYPE_NVDATA.
- *  09-28-01  01.02.03  Modified Event Data for Integrated RAID.
- *  11-01-01  01.02.04  Added defines for MPI_EXT_IMAGE_HEADER ImageType field.
- *  03-14-02  01.02.05  Added HeaderVersion field to MSG_IOC_FACTS_REPLY.
- *  05-31-02  01.02.06  Added define for
- *                      MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID.
- *                      Added AliasIndex to EVENT_DATA_LOGOUT structure.
- *  04-01-03  01.02.07  Added defines for MPI_FW_HEADER_SIGNATURE_.
- *  06-26-03  01.02.08  Added new values to the product family defines.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI_IOC_H
-#define MPI_IOC_H
-
-
-/*****************************************************************************
-*
-*               I O C    M e s s a g e s
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/*  IOCInit message                                                         */
-/****************************************************************************/
-
-typedef struct _MSG_IOC_INIT
-{
-    U8                      WhoInit;                    /* 00h */
-    U8                      Reserved;                   /* 01h */
-    U8                      ChainOffset;                /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      Flags;                      /* 04h */
-    U8                      MaxDevices;                 /* 05h */
-    U8                      MaxBuses;                   /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U16                     ReplyFrameSize;             /* 0Ch */
-    U8                      Reserved1[2];               /* 0Eh */
-    U32                     HostMfaHighAddr;            /* 10h */
-    U32                     SenseBufferHighAddr;        /* 14h */
-} MSG_IOC_INIT, MPI_POINTER PTR_MSG_IOC_INIT,
-  IOCInit_t, MPI_POINTER pIOCInit_t;
-
-/* WhoInit values */
-#define MPI_WHOINIT_NO_ONE                      (0x00)
-#define MPI_WHOINIT_SYSTEM_BIOS                 (0x01)
-#define MPI_WHOINIT_ROM_BIOS                    (0x02)
-#define MPI_WHOINIT_PCI_PEER                    (0x03)
-#define MPI_WHOINIT_HOST_DRIVER                 (0x04)
-#define MPI_WHOINIT_MANUFACTURER                (0x05)
-
-/* Flags values */
-#define MPI_IOCINIT_FLAGS_DISCARD_FW_IMAGE      (0x01)
-
-typedef struct _MSG_IOC_INIT_REPLY
-{
-    U8                      WhoInit;                    /* 00h */
-    U8                      Reserved;                   /* 01h */
-    U8                      MsgLength;                  /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      Flags;                      /* 04h */
-    U8                      MaxDevices;                 /* 05h */
-    U8                      MaxBuses;                   /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U16                     Reserved2;                  /* 0Ch */
-    U16                     IOCStatus;                  /* 0Eh */
-    U32                     IOCLogInfo;                 /* 10h */
-} MSG_IOC_INIT_REPLY, MPI_POINTER PTR_MSG_IOC_INIT_REPLY,
-  IOCInitReply_t, MPI_POINTER pIOCInitReply_t;
-
-
-
-/****************************************************************************/
-/*  IOC Facts message                                                       */
-/****************************************************************************/
-
-typedef struct _MSG_IOC_FACTS
-{
-    U8                      Reserved[2];                /* 00h */
-    U8                      ChainOffset;                /* 01h */
-    U8                      Function;                   /* 02h */
-    U8                      Reserved1[3];               /* 03h */
-    U8                      MsgFlags;                   /* 04h */
-    U32                     MsgContext;                 /* 08h */
-} MSG_IOC_FACTS, MPI_POINTER PTR_IOC_FACTS,
-  IOCFacts_t, MPI_POINTER pIOCFacts_t;
-
-typedef struct _MPI_FW_VERSION_STRUCT
-{
-    U8                      Dev;                        /* 00h */
-    U8                      Unit;                       /* 01h */
-    U8                      Minor;                      /* 02h */
-    U8                      Major;                      /* 03h */
-} MPI_FW_VERSION_STRUCT;
-
-typedef union _MPI_FW_VERSION
-{
-    MPI_FW_VERSION_STRUCT   Struct;
-    U32                     Word;
-} MPI_FW_VERSION;
-
-/* IOC Facts Reply */
-typedef struct _MSG_IOC_FACTS_REPLY
-{
-    U16                     MsgVersion;                 /* 00h */
-    U8                      MsgLength;                  /* 02h */
-    U8                      Function;                   /* 03h */
-    U16                     HeaderVersion;              /* 04h */
-    U8                      IOCNumber;                  /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U16                     IOCExceptions;              /* 0Ch */
-    U16                     IOCStatus;                  /* 0Eh */
-    U32                     IOCLogInfo;                 /* 10h */
-    U8                      MaxChainDepth;              /* 14h */
-    U8                      WhoInit;                    /* 15h */
-    U8                      BlockSize;                  /* 16h */
-    U8                      Flags;                      /* 17h */
-    U16                     ReplyQueueDepth;            /* 18h */
-    U16                     RequestFrameSize;           /* 1Ah */
-    U16                     Reserved_0101_FWVersion;    /* 1Ch */ /* obsolete 16-bit FWVersion */
-    U16                     ProductID;                  /* 1Eh */
-    U32                     CurrentHostMfaHighAddr;     /* 20h */
-    U16                     GlobalCredits;              /* 24h */
-    U8                      NumberOfPorts;              /* 26h */
-    U8                      EventState;                 /* 27h */
-    U32                     CurrentSenseBufferHighAddr; /* 28h */
-    U16                     CurReplyFrameSize;          /* 2Ch */
-    U8                      MaxDevices;                 /* 2Eh */
-    U8                      MaxBuses;                   /* 2Fh */
-    U32                     FWImageSize;                /* 30h */
-    U32                     Reserved4;                  /* 34h */
-    MPI_FW_VERSION          FWVersion;                  /* 38h */
-} MSG_IOC_FACTS_REPLY, MPI_POINTER PTR_MSG_IOC_FACTS_REPLY,
-  IOCFactsReply_t, MPI_POINTER pIOCFactsReply_t;
-
-#define MPI_IOCFACTS_MSGVERSION_MAJOR_MASK          (0xFF00)
-#define MPI_IOCFACTS_MSGVERSION_MINOR_MASK          (0x00FF)
-
-#define MPI_IOCFACTS_HEADERVERSION_UNIT_MASK        (0xFF00)
-#define MPI_IOCFACTS_HEADERVERSION_DEV_MASK         (0x00FF)
-
-#define MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL    (0x0001)
-#define MPI_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID     (0x0002)
-
-#define MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT         (0x01)
-
-#define MPI_IOCFACTS_EVENTSTATE_DISABLED            (0x00)
-#define MPI_IOCFACTS_EVENTSTATE_ENABLED             (0x01)
-
-
-
-/*****************************************************************************
-*
-*               P o r t    M e s s a g e s
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/*  Port Facts message and Reply                                            */
-/****************************************************************************/
-
-typedef struct _MSG_PORT_FACTS
-{
-     U8                     Reserved[2];                /* 00h */
-     U8                     ChainOffset;                /* 02h */
-     U8                     Function;                   /* 03h */
-     U8                     Reserved1[2];               /* 04h */
-     U8                     PortNumber;                 /* 06h */
-     U8                     MsgFlags;                   /* 07h */
-     U32                    MsgContext;                 /* 08h */
-} MSG_PORT_FACTS, MPI_POINTER PTR_MSG_PORT_FACTS,
-  PortFacts_t, MPI_POINTER pPortFacts_t;
-
-typedef struct _MSG_PORT_FACTS_REPLY
-{
-     U16                    Reserved;                   /* 00h */
-     U8                     MsgLength;                  /* 02h */
-     U8                     Function;                   /* 03h */
-     U16                    Reserved1;                  /* 04h */
-     U8                     PortNumber;                 /* 06h */
-     U8                     MsgFlags;                   /* 07h */
-     U32                    MsgContext;                 /* 08h */
-     U16                    Reserved2;                  /* 0Ch */
-     U16                    IOCStatus;                  /* 0Eh */
-     U32                    IOCLogInfo;                 /* 10h */
-     U8                     Reserved3;                  /* 14h */
-     U8                     PortType;                   /* 15h */
-     U16                    MaxDevices;                 /* 16h */
-     U16                    PortSCSIID;                 /* 18h */
-     U16                    ProtocolFlags;              /* 1Ah */
-     U16                    MaxPostedCmdBuffers;        /* 1Ch */
-     U16                    MaxPersistentIDs;           /* 1Eh */
-     U16                    MaxLanBuckets;              /* 20h */
-     U16                    Reserved4;                  /* 22h */
-     U32                    Reserved5;                  /* 24h */
-} MSG_PORT_FACTS_REPLY, MPI_POINTER PTR_MSG_PORT_FACTS_REPLY,
-  PortFactsReply_t, MPI_POINTER pPortFactsReply_t;
-
-
-/* PortTypes values */
-
-#define MPI_PORTFACTS_PORTTYPE_INACTIVE         (0x00)
-#define MPI_PORTFACTS_PORTTYPE_SCSI             (0x01)
-#define MPI_PORTFACTS_PORTTYPE_FC               (0x10)
-
-/* ProtocolFlags values */
-
-#define MPI_PORTFACTS_PROTOCOL_LOGBUSADDR       (0x01)
-#define MPI_PORTFACTS_PROTOCOL_LAN              (0x02)
-#define MPI_PORTFACTS_PROTOCOL_TARGET           (0x04)
-#define MPI_PORTFACTS_PROTOCOL_INITIATOR        (0x08)
-
-
-/****************************************************************************/
-/*  Port Enable Message                                                     */
-/****************************************************************************/
-
-typedef struct _MSG_PORT_ENABLE
-{
-    U8                      Reserved[2];                /* 00h */
-    U8                      ChainOffset;                /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      Reserved1[2];               /* 04h */
-    U8                      PortNumber;                 /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-} MSG_PORT_ENABLE, MPI_POINTER PTR_MSG_PORT_ENABLE,
-  PortEnable_t, MPI_POINTER pPortEnable_t;
-
-typedef struct _MSG_PORT_ENABLE_REPLY
-{
-    U8                      Reserved[2];                /* 00h */
-    U8                      MsgLength;                  /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      Reserved1[2];               /* 04h */
-    U8                      PortNumber;                 /* 05h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U16                     Reserved2;                  /* 0Ch */
-    U16                     IOCStatus;                  /* 0Eh */
-    U32                     IOCLogInfo;                 /* 10h */
-} MSG_PORT_ENABLE_REPLY, MPI_POINTER PTR_MSG_PORT_ENABLE_REPLY,
-  PortEnableReply_t, MPI_POINTER pPortEnableReply_t;
-
-
-/*****************************************************************************
-*
-*               E v e n t    M e s s a g e s
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/*  Event Notification messages                                             */
-/****************************************************************************/
-
-typedef struct _MSG_EVENT_NOTIFY
-{
-    U8                      Switch;                     /* 00h */
-    U8                      Reserved;                   /* 01h */
-    U8                      ChainOffset;                /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      Reserved1[3];               /* 04h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-} MSG_EVENT_NOTIFY, MPI_POINTER PTR_MSG_EVENT_NOTIFY,
-  EventNotification_t, MPI_POINTER pEventNotification_t;
-
-/* Event Notification Reply */
-
-typedef struct _MSG_EVENT_NOTIFY_REPLY
-{
-     U16                    EventDataLength;            /* 00h */
-     U8                     MsgLength;                  /* 02h */
-     U8                     Function;                   /* 03h */
-     U8                     Reserved1[2];               /* 04h */
-     U8                     AckRequired;                /* 06h */
-     U8                     MsgFlags;                   /* 07h */
-     U32                    MsgContext;                 /* 08h */
-     U8                     Reserved2[2];               /* 0Ch */
-     U16                    IOCStatus;                  /* 0Eh */
-     U32                    IOCLogInfo;                 /* 10h */
-     U32                    Event;                      /* 14h */
-     U32                    EventContext;               /* 18h */
-     U32                    Data[1];                    /* 1Ch */
-} MSG_EVENT_NOTIFY_REPLY, MPI_POINTER PTR_MSG_EVENT_NOTIFY_REPLY,
-  EventNotificationReply_t, MPI_POINTER pEventNotificationReply_t;
-
-/* Event Acknowledge */
-
-typedef struct _MSG_EVENT_ACK
-{
-    U8                      Reserved[2];                /* 00h */
-    U8                      ChainOffset;                /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      Reserved1[3];               /* 04h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U32                     Event;                      /* 0Ch */
-    U32                     EventContext;               /* 10h */
-} MSG_EVENT_ACK, MPI_POINTER PTR_MSG_EVENT_ACK,
-  EventAck_t, MPI_POINTER pEventAck_t;
-
-typedef struct _MSG_EVENT_ACK_REPLY
-{
-    U8                      Reserved[2];                /* 00h */
-    U8                      MsgLength;                  /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      Reserved1[3];               /* 04h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U16                     Reserved2;                  /* 0Ch */
-    U16                     IOCStatus;                  /* 0Eh */
-    U32                     IOCLogInfo;                 /* 10h */
-} MSG_EVENT_ACK_REPLY, MPI_POINTER PTR_MSG_EVENT_ACK_REPLY,
-  EventAckReply_t, MPI_POINTER pEventAckReply_t;
-
-/* Switch */
-
-#define MPI_EVENT_NOTIFICATION_SWITCH_OFF   (0x00)
-#define MPI_EVENT_NOTIFICATION_SWITCH_ON    (0x01)
-
-/* Event */
-
-#define MPI_EVENT_NONE                      (0x00000000)
-#define MPI_EVENT_LOG_DATA                  (0x00000001)
-#define MPI_EVENT_STATE_CHANGE              (0x00000002)
-#define MPI_EVENT_UNIT_ATTENTION            (0x00000003)
-#define MPI_EVENT_IOC_BUS_RESET             (0x00000004)
-#define MPI_EVENT_EXT_BUS_RESET             (0x00000005)
-#define MPI_EVENT_RESCAN                    (0x00000006)
-#define MPI_EVENT_LINK_STATUS_CHANGE        (0x00000007)
-#define MPI_EVENT_LOOP_STATE_CHANGE         (0x00000008)
-#define MPI_EVENT_LOGOUT                    (0x00000009)
-#define MPI_EVENT_EVENT_CHANGE              (0x0000000A)
-#define MPI_EVENT_INTEGRATED_RAID           (0x0000000B)
-#define MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE (0x0000000C)
-#define MPI_EVENT_ON_BUS_TIMER_EXPIRED      (0x0000000D)
-
-/* AckRequired field values */
-
-#define MPI_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00)
-#define MPI_EVENT_NOTIFICATION_ACK_REQUIRED     (0x01)
-
-/* EventChange Event data */
-
-typedef struct _EVENT_DATA_EVENT_CHANGE
-{
-    U8                      EventState;                 /* 00h */
-    U8                      Reserved;                   /* 01h */
-    U16                     Reserved1;                  /* 02h */
-} EVENT_DATA_EVENT_CHANGE, MPI_POINTER PTR_EVENT_DATA_EVENT_CHANGE,
-  EventDataEventChange_t, MPI_POINTER pEventDataEventChange_t;
-
-/* SCSI Event data for Port, Bus and Device forms */
-
-typedef struct _EVENT_DATA_SCSI
-{
-    U8                      TargetID;                   /* 00h */
-    U8                      BusPort;                    /* 01h */
-    U16                     Reserved;                   /* 02h */
-} EVENT_DATA_SCSI, MPI_POINTER PTR_EVENT_DATA_SCSI,
-  EventDataScsi_t, MPI_POINTER pEventDataScsi_t;
-
-/* SCSI Device Status Change Event data */
-
-typedef struct _EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE
-{
-    U8                      TargetID;                   /* 00h */
-    U8                      Bus;                        /* 01h */
-    U8                      ReasonCode;                 /* 02h */
-    U8                      LUN;                        /* 03h */
-    U8                      ASC;                        /* 04h */
-    U8                      ASCQ;                       /* 05h */
-    U16                     Reserved;                   /* 06h */
-} EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE,
-  MPI_POINTER PTR_EVENT_DATA_SCSI_DEVICE_STATUS_CHANGE,
-  MpiEventDataScsiDeviceStatusChange_t,
-  MPI_POINTER pMpiEventDataScsiDeviceStatusChange_t;
-
-/* MPI SCSI Device Status Change Event data ReasonCode values */
-#define MPI_EVENT_SCSI_DEV_STAT_RC_ADDED                (0x03)
-#define MPI_EVENT_SCSI_DEV_STAT_RC_NOT_RESPONDING       (0x04)
-#define MPI_EVENT_SCSI_DEV_STAT_RC_SMART_DATA           (0x05)
-
-/* MPI Link Status Change Event data */
-
-typedef struct _EVENT_DATA_LINK_STATUS
-{
-    U8                      State;                      /* 00h */
-    U8                      Reserved;                   /* 01h */
-    U16                     Reserved1;                  /* 02h */
-    U8                      Reserved2;                  /* 04h */
-    U8                      Port;                       /* 05h */
-    U16                     Reserved3;                  /* 06h */
-} EVENT_DATA_LINK_STATUS, MPI_POINTER PTR_EVENT_DATA_LINK_STATUS,
-  EventDataLinkStatus_t, MPI_POINTER pEventDataLinkStatus_t;
-
-#define MPI_EVENT_LINK_STATUS_FAILURE       (0x00000000)
-#define MPI_EVENT_LINK_STATUS_ACTIVE        (0x00000001)
-
-/* MPI Loop State Change Event data */
-
-typedef struct _EVENT_DATA_LOOP_STATE
-{
-    U8                      Character4;                 /* 00h */
-    U8                      Character3;                 /* 01h */
-    U8                      Type;                       /* 02h */
-    U8                      Reserved;                   /* 03h */
-    U8                      Reserved1;                  /* 04h */
-    U8                      Port;                       /* 05h */
-    U16                     Reserved2;                  /* 06h */
-} EVENT_DATA_LOOP_STATE, MPI_POINTER PTR_EVENT_DATA_LOOP_STATE,
-  EventDataLoopState_t, MPI_POINTER pEventDataLoopState_t;
-
-#define MPI_EVENT_LOOP_STATE_CHANGE_LIP     (0x0001)
-#define MPI_EVENT_LOOP_STATE_CHANGE_LPE     (0x0002)
-#define MPI_EVENT_LOOP_STATE_CHANGE_LPB     (0x0003)
-
-/* MPI LOGOUT Event data */
-
-typedef struct _EVENT_DATA_LOGOUT
-{
-    U32                     NPortID;                    /* 00h */
-    U8                      AliasIndex;                 /* 04h */
-    U8                      Port;                       /* 05h */
-    U16                     Reserved1;                  /* 06h */
-} EVENT_DATA_LOGOUT, MPI_POINTER PTR_EVENT_DATA_LOGOUT,
-  EventDataLogout_t, MPI_POINTER pEventDataLogout_t;
-
-#define MPI_EVENT_LOGOUT_ALL_ALIASES        (0xFF)
-
-
-/* MPI Integrated RAID Event data */
-
-typedef struct _EVENT_DATA_RAID
-{
-    U8                      VolumeID;                   /* 00h */
-    U8                      VolumeBus;                  /* 01h */
-    U8                      ReasonCode;                 /* 02h */
-    U8                      PhysDiskNum;                /* 03h */
-    U8                      ASC;                        /* 04h */
-    U8                      ASCQ;                       /* 05h */
-    U16                     Reserved;                   /* 06h */
-    U32                     SettingsStatus;             /* 08h */
-} EVENT_DATA_RAID, MPI_POINTER PTR_EVENT_DATA_RAID,
-  MpiEventDataRaid_t, MPI_POINTER pMpiEventDataRaid_t;
-
-/* MPI Integrated RAID Event data ReasonCode values */
-#define MPI_EVENT_RAID_RC_VOLUME_CREATED                (0x00)
-#define MPI_EVENT_RAID_RC_VOLUME_DELETED                (0x01)
-#define MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED       (0x02)
-#define MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED         (0x03)
-#define MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED       (0x04)
-#define MPI_EVENT_RAID_RC_PHYSDISK_CREATED              (0x05)
-#define MPI_EVENT_RAID_RC_PHYSDISK_DELETED              (0x06)
-#define MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED     (0x07)
-#define MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED       (0x08)
-#define MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED             (0x09)
-#define MPI_EVENT_RAID_RC_SMART_DATA                    (0x0A)
-#define MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED        (0x0B)
-
-
-/*****************************************************************************
-*
-*               F i r m w a r e    L o a d    M e s s a g e s
-*
-*****************************************************************************/
-
-/****************************************************************************/
-/*  Firmware Download message and associated structures                     */
-/****************************************************************************/
-
-typedef struct _MSG_FW_DOWNLOAD
-{
-    U8                      ImageType;                  /* 00h */
-    U8                      Reserved;                   /* 01h */
-    U8                      ChainOffset;                /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      Reserved1[3];               /* 04h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    SGE_MPI_UNION           SGL;                        /* 0Ch */
-} MSG_FW_DOWNLOAD, MPI_POINTER PTR_MSG_FW_DOWNLOAD,
-  FWDownload_t, MPI_POINTER pFWDownload_t;
-
-#define MPI_FW_DOWNLOAD_ITYPE_RESERVED      (0x00)
-#define MPI_FW_DOWNLOAD_ITYPE_FW            (0x01)
-#define MPI_FW_DOWNLOAD_ITYPE_BIOS          (0x02)
-#define MPI_FW_DOWNLOAD_ITYPE_NVDATA        (0x03)
-
-
-typedef struct _FWDownloadTCSGE
-{
-    U8                      Reserved;                   /* 00h */
-    U8                      ContextSize;                /* 01h */
-    U8                      DetailsLength;              /* 02h */
-    U8                      Flags;                      /* 03h */
-    U32                     Reserved_0100_Checksum;     /* 04h */ /* obsolete Checksum */
-    U32                     ImageOffset;                /* 08h */
-    U32                     ImageSize;                  /* 0Ch */
-} FW_DOWNLOAD_TCSGE, MPI_POINTER PTR_FW_DOWNLOAD_TCSGE,
-  FWDownloadTCSGE_t, MPI_POINTER pFWDownloadTCSGE_t;
-
-/* Firmware Download reply */
-typedef struct _MSG_FW_DOWNLOAD_REPLY
-{
-    U8                      ImageType;                  /* 00h */
-    U8                      Reserved;                   /* 01h */
-    U8                      MsgLength;                  /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      Reserved1[3];               /* 04h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U16                     Reserved2;                  /* 0Ch */
-    U16                     IOCStatus;                  /* 0Eh */
-    U32                     IOCLogInfo;                 /* 10h */
-} MSG_FW_DOWNLOAD_REPLY, MPI_POINTER PTR_MSG_FW_DOWNLOAD_REPLY,
-  FWDownloadReply_t, MPI_POINTER pFWDownloadReply_t;
-
-
-/****************************************************************************/
-/*  Firmware Upload message and associated structures                       */
-/****************************************************************************/
-
-typedef struct _MSG_FW_UPLOAD
-{
-    U8                      ImageType;                  /* 00h */
-    U8                      Reserved;                   /* 01h */
-    U8                      ChainOffset;                /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      Reserved1[3];               /* 04h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    SGE_MPI_UNION           SGL;                        /* 0Ch */
-} MSG_FW_UPLOAD, MPI_POINTER PTR_MSG_FW_UPLOAD,
-  FWUpload_t, MPI_POINTER pFWUpload_t;
-
-#define MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM      (0x00)
-#define MPI_FW_UPLOAD_ITYPE_FW_FLASH        (0x01)
-#define MPI_FW_UPLOAD_ITYPE_BIOS_FLASH      (0x02)
-#define MPI_FW_UPLOAD_ITYPE_NVDATA          (0x03)
-
-typedef struct _FWUploadTCSGE
-{
-    U8                      Reserved;                   /* 00h */
-    U8                      ContextSize;                /* 01h */
-    U8                      DetailsLength;              /* 02h */
-    U8                      Flags;                      /* 03h */
-    U32                     Reserved1;                  /* 04h */
-    U32                     ImageOffset;                /* 08h */
-    U32                     ImageSize;                  /* 0Ch */
-} FW_UPLOAD_TCSGE, MPI_POINTER PTR_FW_UPLOAD_TCSGE,
-  FWUploadTCSGE_t, MPI_POINTER pFWUploadTCSGE_t;
-
-/* Firmware Upload reply */
-typedef struct _MSG_FW_UPLOAD_REPLY
-{
-    U8                      ImageType;                  /* 00h */
-    U8                      Reserved;                   /* 01h */
-    U8                      MsgLength;                  /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      Reserved1[3];               /* 04h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U16                     Reserved2;                  /* 0Ch */
-    U16                     IOCStatus;                  /* 0Eh */
-    U32                     IOCLogInfo;                 /* 10h */
-    U32                     ActualImageSize;            /* 14h */
-} MSG_FW_UPLOAD_REPLY, MPI_POINTER PTR_MSG_FW_UPLOAD_REPLY,
-  FWUploadReply_t, MPI_POINTER pFWUploadReply_t;
-
-
-typedef struct _MPI_FW_HEADER
-{
-    U32                     ArmBranchInstruction0;      /* 00h */
-    U32                     Signature0;                 /* 04h */
-    U32                     Signature1;                 /* 08h */
-    U32                     Signature2;                 /* 0Ch */
-    U32                     ArmBranchInstruction1;      /* 10h */
-    U32                     ArmBranchInstruction2;      /* 14h */
-    U32                     Reserved;                   /* 18h */
-    U32                     Checksum;                   /* 1Ch */
-    U16                     VendorId;                   /* 20h */
-    U16                     ProductId;                  /* 22h */
-    MPI_FW_VERSION          FWVersion;                  /* 24h */
-    U32                     SeqCodeVersion;             /* 28h */
-    U32                     ImageSize;                  /* 2Ch */
-    U32                     NextImageHeaderOffset;      /* 30h */
-    U32                     LoadStartAddress;           /* 34h */
-    U32                     IopResetVectorValue;        /* 38h */
-    U32                     IopResetRegAddr;            /* 3Ch */
-    U32                     VersionNameWhat;            /* 40h */
-    U8                      VersionName[32];            /* 44h */
-    U32                     VendorNameWhat;             /* 64h */
-    U8                      VendorName[32];             /* 68h */
-} MPI_FW_HEADER, MPI_POINTER PTR_MPI_FW_HEADER,
-  MpiFwHeader_t, MPI_POINTER pMpiFwHeader_t;
-
-#define MPI_FW_HEADER_WHAT_SIGNATURE        (0x29232840)
-
-/* defines for using the ProductId field */
-#define MPI_FW_HEADER_PID_TYPE_MASK             (0xF000)
-#define MPI_FW_HEADER_PID_TYPE_SCSI             (0x0000)
-#define MPI_FW_HEADER_PID_TYPE_FC               (0x1000)
-
-#define MPI_FW_HEADER_SIGNATURE_0               (0x5AEAA55A)
-#define MPI_FW_HEADER_SIGNATURE_1               (0xA55AEAA5)
-#define MPI_FW_HEADER_SIGNATURE_2               (0x5AA55AEA)
-
-#define MPI_FW_HEADER_PID_PROD_MASK                     (0x0F00)
-#define MPI_FW_HEADER_PID_PROD_INITIATOR_SCSI           (0x0100)
-#define MPI_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI    (0x0200)
-#define MPI_FW_HEADER_PID_PROD_TARGET_SCSI              (0x0300)
-#define MPI_FW_HEADER_PID_PROD_IM_SCSI                  (0x0400)
-#define MPI_FW_HEADER_PID_PROD_IS_SCSI                  (0x0500)
-#define MPI_FW_HEADER_PID_PROD_CTX_SCSI                 (0x0600)
-
-#define MPI_FW_HEADER_PID_FAMILY_MASK           (0x00FF)
-#define MPI_FW_HEADER_PID_FAMILY_1030A0_SCSI    (0x0001)
-#define MPI_FW_HEADER_PID_FAMILY_1030B0_SCSI    (0x0002)
-#define MPI_FW_HEADER_PID_FAMILY_1030B1_SCSI    (0x0003)
-#define MPI_FW_HEADER_PID_FAMILY_1030C0_SCSI    (0x0004)
-#define MPI_FW_HEADER_PID_FAMILY_1020A0_SCSI    (0x0005)
-#define MPI_FW_HEADER_PID_FAMILY_1020B0_SCSI    (0x0006)
-#define MPI_FW_HEADER_PID_FAMILY_1020B1_SCSI    (0x0007)
-#define MPI_FW_HEADER_PID_FAMILY_1020C0_SCSI    (0x0008)
-#define MPI_FW_HEADER_PID_FAMILY_1035A0_SCSI    (0x0009)
-#define MPI_FW_HEADER_PID_FAMILY_1035B0_SCSI    (0x000A)
-#define MPI_FW_HEADER_PID_FAMILY_1030TA0_SCSI   (0x000B)
-#define MPI_FW_HEADER_PID_FAMILY_1020TA0_SCSI   (0x000C)
-#define MPI_FW_HEADER_PID_FAMILY_909_FC         (0x0000)
-#define MPI_FW_HEADER_PID_FAMILY_919_FC         (0x0001)
-#define MPI_FW_HEADER_PID_FAMILY_919X_FC        (0x0002)
-
-typedef struct _MPI_EXT_IMAGE_HEADER
-{
-    U8                      ImageType;                  /* 00h */
-    U8                      Reserved;                   /* 01h */
-    U16                     Reserved1;                  /* 02h */
-    U32                     Checksum;                   /* 04h */
-    U32                     ImageSize;                  /* 08h */
-    U32                     NextImageHeaderOffset;      /* 0Ch */
-    U32                     LoadStartAddress;           /* 10h */
-    U32                     Reserved2;                  /* 14h */
-} MPI_EXT_IMAGE_HEADER, MPI_POINTER PTR_MPI_EXT_IMAGE_HEADER,
-  MpiExtImageHeader_t, MPI_POINTER pMpiExtImageHeader_t;
-
-/* defines for the ImageType field */
-#define MPI_EXT_IMAGE_TYPE_UNSPECIFIED          (0x00)
-#define MPI_EXT_IMAGE_TYPE_FW                   (0x01)
-#define MPI_EXT_IMAGE_TYPE_NVDATA               (0x03)
-
-#endif
-/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_lan.h,v 1.5 2005/07/10 15:05:39 scottl Exp $ */
-/*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon including
- *    a substantially similar Disclaimer requirement for further binary
- *    redistribution.
- * 3. Neither the name of the LSI Logic Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
- * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- *           Name:  MPI_LAN.H
- *          Title:  MPI LAN messages and structures
- *  Creation Date:  June 30, 2000
- *
- *    MPI_LAN.H Version:  01.02.01
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  05-08-00  00.10.01  Original release for 0.10 spec dated 4/26/2000.
- *  05-24-00  00.10.02  Added LANStatus field to _MSG_LAN_SEND_REPLY.
- *                      Added LANStatus field to _MSG_LAN_RECEIVE_POST_REPLY.
- *                      Moved ListCount field in _MSG_LAN_RECEIVE_POST_REPLY.
- *  06-06-00  01.00.01  Update version number for 1.0 release.
- *  06-12-00  01.00.02  Added MPI_ to BUCKETSTATUS_ definitions.
- *  06-22-00  01.00.03  Major changes to match new LAN definition in 1.0 spec.
- *  06-30-00  01.00.04  Added Context Reply definitions per revised proposal.
- *                      Changed transaction context usage to bucket/buffer.
- *  07-05-00  01.00.05  Removed LAN_RECEIVE_POST_BUCKET_CONTEXT_MASK definition
- *                      to lan private header file
- *  11-02-00  01.01.01  Original release for post 1.0 work
- *  02-20-01  01.01.02  Started using MPI_POINTER.
- *  03-27-01  01.01.03  Added structure offset comments.
- *  08-08-01  01.02.01  Original release for v1.2 work.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI_LAN_H
-#define MPI_LAN_H
-
-
-/******************************************************************************
-*
-*               L A N    M e s s a g e s
-*
-*******************************************************************************/
-
-/* LANSend messages */
-
-typedef struct _MSG_LAN_SEND_REQUEST
-{
-    U16                     Reserved;           /* 00h */
-    U8                      ChainOffset;        /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved2;          /* 04h */
-    U8                      PortNumber;         /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    SGE_MPI_UNION           SG_List[1];         /* 0Ch */
-} MSG_LAN_SEND_REQUEST, MPI_POINTER PTR_MSG_LAN_SEND_REQUEST,
-  LANSendRequest_t, MPI_POINTER pLANSendRequest_t;
-
-
-typedef struct _MSG_LAN_SEND_REPLY
-{
-    U16                     Reserved;           /* 00h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U8                      Reserved2;          /* 04h */
-    U8                      NumberOfContexts;   /* 05h */
-    U8                      PortNumber;         /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U16                     Reserved3;          /* 0Ch */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-    U32                     BufferContext;      /* 14h */
-} MSG_LAN_SEND_REPLY, MPI_POINTER PTR_MSG_LAN_SEND_REPLY,
-  LANSendReply_t, MPI_POINTER pLANSendReply_t;
-
-
-/* LANReceivePost */
-
-typedef struct _MSG_LAN_RECEIVE_POST_REQUEST
-{
-    U16                     Reserved;           /* 00h */
-    U8                      ChainOffset;        /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved2;          /* 04h */
-    U8                      PortNumber;         /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U32                     BucketCount;        /* 0Ch */
-    SGE_MPI_UNION           SG_List[1];         /* 10h */
-} MSG_LAN_RECEIVE_POST_REQUEST, MPI_POINTER PTR_MSG_LAN_RECEIVE_POST_REQUEST,
-  LANReceivePostRequest_t, MPI_POINTER pLANReceivePostRequest_t;
-
-
-typedef struct _MSG_LAN_RECEIVE_POST_REPLY
-{
-    U16                     Reserved;           /* 00h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U8                      Reserved2;          /* 04h */
-    U8                      NumberOfContexts;   /* 05h */
-    U8                      PortNumber;         /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U16                     Reserved3;          /* 0Ch */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-    U32                     BucketsRemaining;   /* 14h */
-    U32                     PacketOffset;       /* 18h */
-    U32                     PacketLength;       /* 1Ch */
-    U32                     BucketContext[1];   /* 20h */
-} MSG_LAN_RECEIVE_POST_REPLY, MPI_POINTER PTR_MSG_LAN_RECEIVE_POST_REPLY,
-  LANReceivePostReply_t, MPI_POINTER pLANReceivePostReply_t;
-
-
-/* LANReset */
-
-typedef struct _MSG_LAN_RESET_REQUEST
-{
-    U16                     Reserved;           /* 00h */
-    U8                      ChainOffset;        /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved2;          /* 04h */
-    U8                      PortNumber;         /* 05h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-} MSG_LAN_RESET_REQUEST, MPI_POINTER PTR_MSG_LAN_RESET_REQUEST,
-  LANResetRequest_t, MPI_POINTER pLANResetRequest_t;
-
-
-typedef struct _MSG_LAN_RESET_REPLY
-{
-    U16                     Reserved;           /* 00h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved2;          /* 04h */
-    U8                      PortNumber;         /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U16                     Reserved3;          /* 0Ch */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-} MSG_LAN_RESET_REPLY, MPI_POINTER PTR_MSG_LAN_RESET_REPLY,
-  LANResetReply_t, MPI_POINTER pLANResetReply_t;
-
-
-/****************************************************************************/
-/* LAN Context Reply defines and macros                                     */
-/****************************************************************************/
-
-#define LAN_REPLY_PACKET_LENGTH_MASK            (0x0000FFFF)
-#define LAN_REPLY_PACKET_LENGTH_SHIFT           (0)
-#define LAN_REPLY_BUCKET_CONTEXT_MASK           (0x07FF0000)
-#define LAN_REPLY_BUCKET_CONTEXT_SHIFT          (16)
-#define LAN_REPLY_BUFFER_CONTEXT_MASK           (0x07FFFFFF)
-#define LAN_REPLY_BUFFER_CONTEXT_SHIFT          (0)
-#define LAN_REPLY_FORM_MASK                     (0x18000000)
-#define LAN_REPLY_FORM_RECEIVE_SINGLE           (0x00)
-#define LAN_REPLY_FORM_RECEIVE_MULTIPLE         (0x01)
-#define LAN_REPLY_FORM_SEND_SINGLE              (0x02)
-#define LAN_REPLY_FORM_MESSAGE_CONTEXT          (0x03)
-#define LAN_REPLY_FORM_SHIFT                    (27)
-
-#define GET_LAN_PACKET_LENGTH(x)    (((x) & LAN_REPLY_PACKET_LENGTH_MASK)   \
-                                        >> LAN_REPLY_PACKET_LENGTH_SHIFT)
-
-#define SET_LAN_PACKET_LENGTH(x, lth)                                       \
-            ((x) = ((x) & ~LAN_REPLY_PACKET_LENGTH_MASK) |                  \
-                            (((lth) << LAN_REPLY_PACKET_LENGTH_SHIFT) &     \
-                                        LAN_REPLY_PACKET_LENGTH_MASK))
-
-#define GET_LAN_BUCKET_CONTEXT(x)   (((x) & LAN_REPLY_BUCKET_CONTEXT_MASK)  \
-                                        >> LAN_REPLY_BUCKET_CONTEXT_SHIFT)
-
-#define SET_LAN_BUCKET_CONTEXT(x, ctx)                                      \
-            ((x) = ((x) & ~LAN_REPLY_BUCKET_CONTEXT_MASK) |                 \
-                            (((ctx) << LAN_REPLY_BUCKET_CONTEXT_SHIFT) &    \
-                                        LAN_REPLY_BUCKET_CONTEXT_MASK))
-
-#define GET_LAN_BUFFER_CONTEXT(x)   (((x) & LAN_REPLY_BUFFER_CONTEXT_MASK)  \
-                                        >> LAN_REPLY_BUFFER_CONTEXT_SHIFT)
-
-#define SET_LAN_BUFFER_CONTEXT(x, ctx)                                      \
-            ((x) = ((x) & ~LAN_REPLY_BUFFER_CONTEXT_MASK) |                 \
-                            (((ctx) << LAN_REPLY_BUFFER_CONTEXT_SHIFT) &    \
-                                        LAN_REPLY_BUFFER_CONTEXT_MASK))
-
-#define GET_LAN_FORM(x)             (((x) & LAN_REPLY_FORM_MASK)            \
-                                        >> LAN_REPLY_FORM_SHIFT)
-
-#define SET_LAN_FORM(x, frm)                                                \
-            ((x) = ((x) & ~LAN_REPLY_FORM_MASK) |                           \
-                            (((frm) << LAN_REPLY_FORM_SHIFT) &              \
-                                        LAN_REPLY_FORM_MASK))
-
-
-/****************************************************************************/
-/* LAN Current Device State defines                                         */
-/****************************************************************************/
-
-#define MPI_LAN_DEVICE_STATE_RESET                     (0x00)
-#define MPI_LAN_DEVICE_STATE_OPERATIONAL               (0x01)
-
-
-/****************************************************************************/
-/* LAN Loopback defines                                                     */
-/****************************************************************************/
-
-#define MPI_LAN_TX_MODES_ENABLE_LOOPBACK_SUPPRESSION   (0x01)
-
-#endif
-
-/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_raid.h,v 1.6 2005/07/10 15:05:39 scottl Exp $ */
-/*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon including
- *    a substantially similar Disclaimer requirement for further binary
- *    redistribution.
- * 3. Neither the name of the LSI Logic Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
- * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- *           Name:  MPI_RAID.H
- *          Title:  MPI RAID message and structures
- *  Creation Date:  February 27, 2001
- *
- *    MPI_RAID.H Version:  01.02.09
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  02-27-01  01.01.01  Original release for this file.
- *  03-27-01  01.01.02  Added structure offset comments.
- *  08-08-01  01.02.01  Original release for v1.2 work.
- *  09-28-01  01.02.02  Major rework for MPI v1.2 Integrated RAID changes.
- *  10-04-01  01.02.03  Added ActionData defines for
- *                      MPI_RAID_ACTION_DELETE_VOLUME action.
- *  11-01-01  01.02.04  Added define for MPI_RAID_ACTION_ADATA_DO_NOT_SYNC.
- *  03-14-02  01.02.05  Added define for MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT.
- *  05-07-02  01.02.06  Added define for MPI_RAID_ACTION_ACTIVATE_VOLUME,
- *                      MPI_RAID_ACTION_INACTIVATE_VOLUME, and
- *                      MPI_RAID_ACTION_ADATA_INACTIVATE_ALL.
- *  07-12-02  01.02.07  Added structures for Mailbox request and reply.
- *  11-15-02  01.02.08  Added missing MsgContext field to MSG_MAILBOX_REQUEST.
- *  04-01-03  01.02.09  New action data option flag for
- *                      MPI_RAID_ACTION_DELETE_VOLUME.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI_RAID_H
-#define MPI_RAID_H
-
-
-/******************************************************************************
-*
-*        R A I D    M e s s a g e s
-*
-*******************************************************************************/
-
-
-/****************************************************************************/
-/* RAID Volume Request                                                      */
-/****************************************************************************/
-
-typedef struct _MSG_RAID_ACTION
-{
-    U8                      Action;             /* 00h */
-    U8                      Reserved1;          /* 01h */
-    U8                      ChainOffset;        /* 02h */
-    U8                      Function;           /* 03h */
-    U8                      VolumeID;           /* 04h */
-    U8                      VolumeBus;          /* 05h */
-    U8                      PhysDiskNum;        /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U32                     Reserved2;          /* 0Ch */
-    U32                     ActionDataWord;     /* 10h */
-    SGE_SIMPLE_UNION        ActionDataSGE;      /* 14h */
-} MSG_RAID_ACTION_REQUEST, MPI_POINTER PTR_MSG_RAID_ACTION_REQUEST,
-  MpiRaidActionRequest_t , MPI_POINTER pMpiRaidActionRequest_t;
-
-
-/* RAID Action request Action values */
-
-#define MPI_RAID_ACTION_STATUS                      (0x00)
-#define MPI_RAID_ACTION_INDICATOR_STRUCT            (0x01)
-#define MPI_RAID_ACTION_CREATE_VOLUME               (0x02)
-#define MPI_RAID_ACTION_DELETE_VOLUME               (0x03)
-#define MPI_RAID_ACTION_DISABLE_VOLUME              (0x04)
-#define MPI_RAID_ACTION_ENABLE_VOLUME               (0x05)
-#define MPI_RAID_ACTION_QUIESCE_PHYS_IO             (0x06)
-#define MPI_RAID_ACTION_ENABLE_PHYS_IO              (0x07)
-#define MPI_RAID_ACTION_CHANGE_VOLUME_SETTINGS      (0x08)
-#define MPI_RAID_ACTION_PHYSDISK_OFFLINE            (0x0A)
-#define MPI_RAID_ACTION_PHYSDISK_ONLINE             (0x0B)
-#define MPI_RAID_ACTION_CHANGE_PHYSDISK_SETTINGS    (0x0C)
-#define MPI_RAID_ACTION_CREATE_PHYSDISK             (0x0D)
-#define MPI_RAID_ACTION_DELETE_PHYSDISK             (0x0E)
-#define MPI_RAID_ACTION_FAIL_PHYSDISK               (0x0F)
-#define MPI_RAID_ACTION_REPLACE_PHYSDISK            (0x10)
-#define MPI_RAID_ACTION_ACTIVATE_VOLUME             (0x11)
-#define MPI_RAID_ACTION_INACTIVATE_VOLUME           (0x12)
-#define MPI_RAID_ACTION_SET_RESYNC_RATE             (0x13)
-#define MPI_RAID_ACTION_SET_DATA_SCRUB_RATE         (0x14)
-
-/* ActionDataWord defines for use with MPI_RAID_ACTION_CREATE_VOLUME action */
-#define MPI_RAID_ACTION_ADATA_DO_NOT_SYNC           (0x00000001)
-#define MPI_RAID_ACTION_ADATA_LOW_LEVEL_INIT        (0x00000002)
-
-/* ActionDataWord defines for use with MPI_RAID_ACTION_DELETE_VOLUME action */
-#define MPI_RAID_ACTION_ADATA_KEEP_PHYS_DISKS       (0x00000000)
-#define MPI_RAID_ACTION_ADATA_DEL_PHYS_DISKS        (0x00000001)
-
-#define MPI_RAID_ACTION_ADATA_KEEP_LBA0             (0x00000000)
-#define MPI_RAID_ACTION_ADATA_ZERO_LBA0             (0x00000002)
-
-/* ActionDataWord defines for use with MPI_RAID_ACTION_ACTIVATE_VOLUME action */
-#define MPI_RAID_ACTION_ADATA_INACTIVATE_ALL        (0x00000001)
-
-
-/* RAID Action reply message */
-
-typedef struct _MSG_RAID_ACTION_REPLY
-{
-    U8                      Action;             /* 00h */
-    U8                      Reserved;           /* 01h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U8                      VolumeID;           /* 04h */
-    U8                      VolumeBus;          /* 05h */
-    U8                      PhysDiskNum;        /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U16                     ActionStatus;       /* 0Ch */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-    U32                     VolumeStatus;       /* 14h */
-    U32                     ActionData;         /* 18h */
-} MSG_RAID_ACTION_REPLY, MPI_POINTER PTR_MSG_RAID_ACTION_REPLY,
-  MpiRaidActionReply_t, MPI_POINTER pMpiRaidActionReply_t;
-
-
-/* RAID Volume reply ActionStatus values */
-
-#define MPI_RAID_ACTION_ASTATUS_SUCCESS             (0x0000)
-#define MPI_RAID_ACTION_ASTATUS_INVALID_ACTION      (0x0001)
-#define MPI_RAID_ACTION_ASTATUS_FAILURE             (0x0002)
-#define MPI_RAID_ACTION_ASTATUS_IN_PROGRESS         (0x0003)
-
-
-/* RAID Volume reply RAID Volume Indicator structure */
-
-typedef struct _MPI_RAID_VOL_INDICATOR
-{
-    U64                     TotalBlocks;        /* 00h */
-    U64                     BlocksRemaining;    /* 08h */
-} MPI_RAID_VOL_INDICATOR, MPI_POINTER PTR_MPI_RAID_VOL_INDICATOR,
-  MpiRaidVolIndicator_t, MPI_POINTER pMpiRaidVolIndicator_t;
-
-
-/****************************************************************************/
-/* SCSI IO RAID Passthrough Request                                         */
-/****************************************************************************/
-
-typedef struct _MSG_SCSI_IO_RAID_PT_REQUEST
-{
-    U8                      PhysDiskNum;        /* 00h */
-    U8                      Reserved1;          /* 01h */
-    U8                      ChainOffset;        /* 02h */
-    U8                      Function;           /* 03h */
-    U8                      CDBLength;          /* 04h */
-    U8                      SenseBufferLength;  /* 05h */
-    U8                      Reserved2;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U8                      LUN[8];             /* 0Ch */
-    U32                     Control;            /* 14h */
-    U8                      CDB[16];            /* 18h */
-    U32                     DataLength;         /* 28h */
-    U32                     SenseBufferLowAddr; /* 2Ch */
-    SGE_IO_UNION            SGL;                /* 30h */
-} MSG_SCSI_IO_RAID_PT_REQUEST, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REQUEST,
-  SCSIIORaidPassthroughRequest_t, MPI_POINTER pSCSIIORaidPassthroughRequest_t;
-
-
-/* SCSI IO RAID Passthrough reply structure */
-
-typedef struct _MSG_SCSI_IO_RAID_PT_REPLY
-{
-    U8                      PhysDiskNum;        /* 00h */
-    U8                      Reserved1;          /* 01h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U8                      CDBLength;          /* 04h */
-    U8                      SenseBufferLength;  /* 05h */
-    U8                      Reserved2;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U8                      SCSIStatus;         /* 0Ch */
-    U8                      SCSIState;          /* 0Dh */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-    U32                     TransferCount;      /* 14h */
-    U32                     SenseCount;         /* 18h */
-    U32                     ResponseInfo;       /* 1Ch */
-} MSG_SCSI_IO_RAID_PT_REPLY, MPI_POINTER PTR_MSG_SCSI_IO_RAID_PT_REPLY,
-  SCSIIORaidPassthroughReply_t, MPI_POINTER pSCSIIORaidPassthroughReply_t;
-
-
-/****************************************************************************/
-/* Mailbox reqeust structure */
-/****************************************************************************/
-
-typedef struct _MSG_MAILBOX_REQUEST
-{
-    U16                     Reserved1;
-    U8                      ChainOffset;
-    U8                      Function;
-    U16                     Reserved2;
-    U8                      Reserved3;
-    U8                      MsgFlags;
-    U32                     MsgContext;
-    U8                      Command[10];
-    U16                     Reserved4;
-    SGE_IO_UNION            SGL;
-} MSG_MAILBOX_REQUEST, MPI_POINTER PTR_MSG_MAILBOX_REQUEST,
-  MailboxRequest_t, MPI_POINTER pMailboxRequest_t;
-
-
-/* Mailbox reply structure */
-typedef struct _MSG_MAILBOX_REPLY
-{
-    U16                     Reserved1;          /* 00h */
-    U8                      MsgLength;          /* 02h */
-    U8                      Function;           /* 03h */
-    U16                     Reserved2;          /* 04h */
-    U8                      Reserved3;          /* 06h */
-    U8                      MsgFlags;           /* 07h */
-    U32                     MsgContext;         /* 08h */
-    U16                     MailboxStatus;      /* 0Ch */
-    U16                     IOCStatus;          /* 0Eh */
-    U32                     IOCLogInfo;         /* 10h */
-    U32                     Reserved4;          /* 14h */
-} MSG_MAILBOX_REPLY, MPI_POINTER PTR_MSG_MAILBOX_REPLY,
-  MailboxReply_t, MPI_POINTER pMailboxReply_t;
-
-#endif
-
-
-
-/* $FreeBSD: /repoman/r/ncvs/src/sys/dev/mpt/mpilib/mpi_targ.h,v 1.5 2005/07/10 15:05:39 scottl Exp $ */
-/*-
- * Copyright (c) 2000-2005, LSI Logic Corporation and its contributors.
- * All rights reserved.
- * 
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are
- * met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon including
- *    a substantially similar Disclaimer requirement for further binary
- *    redistribution.
- * 3. Neither the name of the LSI Logic Corporation nor the names of its
- *    contributors may be used to endorse or promote products derived from
- *    this software without specific prior written permission.
- * 
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
- * OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- *           Name:  MPI_TARG.H
- *          Title:  MPI Target mode messages and structures
- *  Creation Date:  June 22, 2000
- *
- *    MPI_TARG.H Version:  01.02.09
- *
- *  Version History
- *  ---------------
- *
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
- *  05-08-00  00.10.01  Original release for 0.10 spec dated 4/26/2000.
- *  06-06-00  01.00.01  Update version number for 1.0 release.
- *  06-22-00  01.00.02  Added _MSG_TARGET_CMD_BUFFER_POST_REPLY structure.
- *                      Corrected DECSRIPTOR typo to DESCRIPTOR.
- *  11-02-00  01.01.01  Original release for post 1.0 work
- *                      Modified target mode to use IoIndex instead of
- *                      HostIndex and IocIndex. Added Alias.
- *  01-09-01  01.01.02  Added defines for TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER
- *                      and TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER.
- *  02-20-01  01.01.03  Started using MPI_POINTER.
- *                      Added structures for MPI_TARGET_SCSI_SPI_CMD_BUFFER and
- *                      MPI_TARGET_FCP_CMD_BUFFER.
- *  03-27-01  01.01.04  Added structure offset comments.
- *  08-08-01  01.02.01  Original release for v1.2 work.
- *  09-28-01  01.02.02  Added structure for MPI_TARGET_SCSI_SPI_STATUS_IU.
- *                      Added PriorityReason field to some replies and
- *                      defined more PriorityReason codes.
- *                      Added some defines for to support previous version
- *                      of MPI.
- *  10-04-01  01.02.03  Added PriorityReason to MSG_TARGET_ERROR_REPLY.
- *  11-01-01  01.02.04  Added define for TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY.
- *  03-14-02  01.02.05  Modified MPI_TARGET_FCP_RSP_BUFFER to get the proper
- *                      byte ordering.
- *  05-31-02  01.02.06  Modified TARGET_MODE_REPLY_ALIAS_MASK to only include
- *                      one bit.
- *                      Added AliasIndex field to MPI_TARGET_FCP_CMD_BUFFER.
- *  09-16-02  01.02.07  Added flags for confirmed completion.
- *                      Added PRIORITY_REASON_TARGET_BUSY.
- *  11-15-02  01.02.08  Added AliasID field to MPI_TARGET_SCSI_SPI_CMD_BUFFER.
- *  04-01-03  01.02.09  Added OptionalOxid field to MPI_TARGET_FCP_CMD_BUFFER.
- *  --------------------------------------------------------------------------
- */
-
-#ifndef MPI_TARG_H
-#define MPI_TARG_H
-
-
-/******************************************************************************
-*
-*        S C S I    T a r g e t    M e s s a g e s
-*
-*******************************************************************************/
-
-typedef struct _CMD_BUFFER_DESCRIPTOR
-{
-    U16                     IoIndex;                    /* 00h */
-    U16                     Reserved;                   /* 02h */
-    union                                               /* 04h */
-    {
-        U32                 PhysicalAddress32;
-        U64                 PhysicalAddress64;
-    } u;
-} CMD_BUFFER_DESCRIPTOR, MPI_POINTER PTR_CMD_BUFFER_DESCRIPTOR,
-  CmdBufferDescriptor_t, MPI_POINTER pCmdBufferDescriptor_t;
-
-
-/****************************************************************************/
-/* Target Command Buffer Post Request                                       */
-/****************************************************************************/
-
-typedef struct _MSG_TARGET_CMD_BUFFER_POST_REQUEST
-{
-    U8                      BufferPostFlags;            /* 00h */
-    U8                      BufferCount;                /* 01h */
-    U8                      ChainOffset;                /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      BufferLength;               /* 04h */
-    U8                      Reserved;                   /* 05h */
-    U8                      Reserved1;                  /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    CMD_BUFFER_DESCRIPTOR   Buffer[1];                  /* 0Ch */
-} MSG_TARGET_CMD_BUFFER_POST_REQUEST, MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_REQUEST,
-  TargetCmdBufferPostRequest_t, MPI_POINTER pTargetCmdBufferPostRequest_t;
-
-#define CMD_BUFFER_POST_FLAGS_PORT_MASK         (0x01)
-#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_MASK    (0x80)
-#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_32      (0)
-#define CMD_BUFFER_POST_FLAGS_ADDR_MODE_64      (1)
-#define CMD_BUFFER_POST_FLAGS_64_BIT_ADDR       (0x80)
-
-#define CMD_BUFFER_POST_IO_INDEX_MASK           (0x00003FFF)
-#define CMD_BUFFER_POST_IO_INDEX_MASK_0100      (0x000003FF) /* obsolete */
-
-
-typedef struct _MSG_TARGET_CMD_BUFFER_POST_REPLY
-{
-    U8                      BufferPostFlags;            /* 00h */
-    U8                      BufferCount;                /* 01h */
-    U8                      MsgLength;                  /* 02h */
-    U8                      Function;                   /* 03h */
-    U8                      BufferLength;               /* 04h */
-    U8                      Reserved;                   /* 05h */
-    U8                      Reserved1;                  /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U16                     Reserved2;                  /* 0Ch */
-    U16                     IOCStatus;                  /* 0Eh */
-    U32                     IOCLogInfo;                 /* 10h */
-} MSG_TARGET_CMD_BUFFER_POST_REPLY, MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_REPLY,
-  TargetCmdBufferPostReply_t, MPI_POINTER pTargetCmdBufferPostReply_t;
-
-/* the following structure is obsolete as of MPI v1.2 */
-typedef struct _MSG_PRIORITY_CMD_RECEIVED_REPLY
-{
-    U16                     Reserved;                   /* 00h */
-    U8                      MsgLength;                  /* 02h */
-    U8                      Function;                   /* 03h */
-    U16                     Reserved1;                  /* 04h */
-    U8                      Reserved2;                  /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U8                      PriorityReason;             /* 0Ch */
-    U8                      Reserved3;                  /* 0Dh */
-    U16                     IOCStatus;                  /* 0Eh */
-    U32                     IOCLogInfo;                 /* 10h */
-    U32                     ReplyWord;                  /* 14h */
-} MSG_PRIORITY_CMD_RECEIVED_REPLY, MPI_POINTER PTR_MSG_PRIORITY_CMD_RECEIVED_REPLY,
-  PriorityCommandReceivedReply_t, MPI_POINTER pPriorityCommandReceivedReply_t;
-
-#define PRIORITY_REASON_NO_DISCONNECT           (0x00)
-#define PRIORITY_REASON_SCSI_TASK_MANAGEMENT    (0x01)
-#define PRIORITY_REASON_CMD_PARITY_ERR          (0x02)
-#define PRIORITY_REASON_MSG_OUT_PARITY_ERR      (0x03)
-#define PRIORITY_REASON_LQ_CRC_ERR              (0x04)
-#define PRIORITY_REASON_CMD_CRC_ERR             (0x05)
-#define PRIORITY_REASON_PROTOCOL_ERR            (0x06)
-#define PRIORITY_REASON_DATA_OUT_PARITY_ERR     (0x07)
-#define PRIORITY_REASON_DATA_OUT_CRC_ERR        (0x08)
-#define PRIORITY_REASON_TARGET_BUSY             (0x09)
-#define PRIORITY_REASON_UNKNOWN                 (0xFF)
-
-
-typedef struct _MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY
-{
-    U16                     Reserved;                   /* 00h */
-    U8                      MsgLength;                  /* 02h */
-    U8                      Function;                   /* 03h */
-    U16                     Reserved1;                  /* 04h */
-    U8                      Reserved2;                  /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U8                      PriorityReason;             /* 0Ch */
-    U8                      Reserved3;                  /* 0Dh */
-    U16                     IOCStatus;                  /* 0Eh */
-    U32                     IOCLogInfo;                 /* 10h */
-    U32                     ReplyWord;                  /* 14h */
-} MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY,
-  MPI_POINTER PTR_MSG_TARGET_CMD_BUFFER_POST_ERROR_REPLY,
-  TargetCmdBufferPostErrorReply_t, MPI_POINTER pTargetCmdBufferPostErrorReply_t;
-
-
-typedef struct _MPI_TARGET_FCP_CMD_BUFFER
-{
-    U8      FcpLun[8];                                  /* 00h */
-    U8      FcpCntl[4];                                 /* 08h */
-    U8      FcpCdb[16];                                 /* 0Ch */
-    U32     FcpDl;                                      /* 1Ch */
-    U8      AliasIndex;                                 /* 20h */
-    U8      Reserved1;                                  /* 21h */
-    U16     OptionalOxid;                               /* 22h */
-} MPI_TARGET_FCP_CMD_BUFFER, MPI_POINTER PTR_MPI_TARGET_FCP_CMD_BUFFER,
-  MpiTargetFcpCmdBuffer, MPI_POINTER pMpiTargetFcpCmdBuffer;
-
-
-typedef struct _MPI_TARGET_SCSI_SPI_CMD_BUFFER
-{
-    /* SPI L_Q information unit */
-    U8      L_QType;                                    /* 00h */
-    U8      Reserved;                                   /* 01h */
-    U16     Tag;                                        /* 02h */
-    U8      LogicalUnitNumber[8];                       /* 04h */
-    U32     DataLength;                                 /* 0Ch */
-    /* SPI command information unit */
-    U8      ReservedFirstByteOfCommandIU;               /* 10h */
-    U8      TaskAttribute;                              /* 11h */
-    U8      TaskManagementFlags;                        /* 12h */
-    U8      AdditionalCDBLength;                        /* 13h */
-    U8      CDB[16];                                    /* 14h */
-    /* Alias ID */
-    U8      AliasID;                                    /* 24h */
-    U8      Reserved1;                                  /* 25h */
-    U16     Reserved2;                                  /* 26h */
-} MPI_TARGET_SCSI_SPI_CMD_BUFFER,
-  MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_CMD_BUFFER,
-  MpiTargetScsiSpiCmdBuffer, MPI_POINTER pMpiTargetScsiSpiCmdBuffer;
-
-
-/****************************************************************************/
-/* Target Assist Request                                                    */
-/****************************************************************************/
-
-typedef struct _MSG_TARGET_ASSIST_REQUEST
-{
-    U8                      StatusCode;                 /* 00h */
-    U8                      TargetAssistFlags;          /* 01h */
-    U8                      ChainOffset;                /* 02h */
-    U8                      Function;                   /* 03h */
-    U16                     QueueTag;                   /* 04h */
-    U8                      Reserved;                   /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U32                     ReplyWord;                  /* 0Ch */
-    U8                      LUN[8];                     /* 10h */
-    U32                     RelativeOffset;             /* 18h */
-    U32                     DataLength;                 /* 1Ch */
-    SGE_IO_UNION            SGL[1];                     /* 20h */
-} MSG_TARGET_ASSIST_REQUEST, MPI_POINTER PTR_MSG_TARGET_ASSIST_REQUEST,
-  TargetAssistRequest_t, MPI_POINTER pTargetAssistRequest_t;
-
-#define TARGET_ASSIST_FLAGS_DATA_DIRECTION          (0x01)
-#define TARGET_ASSIST_FLAGS_AUTO_STATUS             (0x02)
-#define TARGET_ASSIST_FLAGS_HIGH_PRIORITY           (0x04)
-#define TARGET_ASSIST_FLAGS_CONFIRMED               (0x08)
-#define TARGET_ASSIST_FLAGS_REPOST_CMD_BUFFER       (0x80)
-
-
-typedef struct _MSG_TARGET_ERROR_REPLY
-{
-    U16                     Reserved;                   /* 00h */
-    U8                      MsgLength;                  /* 02h */
-    U8                      Function;                   /* 03h */
-    U16                     Reserved1;                  /* 04h */
-    U8                      Reserved2;                  /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U8                      PriorityReason;             /* 0Ch */
-    U8                      Reserved3;                  /* 0Dh */
-    U16                     IOCStatus;                  /* 0Eh */
-    U32                     IOCLogInfo;                 /* 10h */
-    U32                     ReplyWord;                  /* 14h */
-    U32                     TransferCount;              /* 18h */
-} MSG_TARGET_ERROR_REPLY, MPI_POINTER PTR_MSG_TARGET_ERROR_REPLY,
-  TargetErrorReply_t, MPI_POINTER pTargetErrorReply_t;
-
-
-/****************************************************************************/
-/* Target Status Send Request                                               */
-/****************************************************************************/
-
-typedef struct _MSG_TARGET_STATUS_SEND_REQUEST
-{
-    U8                      StatusCode;                 /* 00h */
-    U8                      StatusFlags;                /* 01h */
-    U8                      ChainOffset;                /* 02h */
-    U8                      Function;                   /* 03h */
-    U16                     QueueTag;                   /* 04h */
-    U8                      Reserved;                   /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U32                     ReplyWord;                  /* 0Ch */
-    U8                      LUN[8];                     /* 10h */
-    SGE_SIMPLE_UNION        StatusDataSGE;              /* 18h */
-} MSG_TARGET_STATUS_SEND_REQUEST, MPI_POINTER PTR_MSG_TARGET_STATUS_SEND_REQUEST,
-  TargetStatusSendRequest_t, MPI_POINTER pTargetStatusSendRequest_t;
-
-#define TARGET_STATUS_SEND_FLAGS_AUTO_GOOD_STATUS   (0x01)
-#define TARGET_STATUS_SEND_FLAGS_HIGH_PRIORITY      (0x04)
-#define TARGET_STATUS_SEND_FLAGS_CONFIRMED          (0x08)
-#define TARGET_STATUS_SEND_FLAGS_REPOST_CMD_BUFFER  (0x80)
-
-/*
- * NOTE: FCP_RSP data is big-endian. When used on a little-endian system, this
- * structure properly orders the bytes.
- */
-typedef struct _MPI_TARGET_FCP_RSP_BUFFER
-{
-    U8      Reserved0[8];                               /* 00h */
-    U8      Reserved1[2];                               /* 08h */
-    U8      FcpFlags;                                   /* 0Ah */
-    U8      FcpStatus;                                  /* 0Bh */
-    U32     FcpResid;                                   /* 0Ch */
-    U32     FcpSenseLength;                             /* 10h */
-    U32     FcpResponseLength;                          /* 14h */
-    U8      FcpResponseData[8];                         /* 18h */
-    U8      FcpSenseData[32]; /* Pad to 64 bytes */     /* 20h */
-} MPI_TARGET_FCP_RSP_BUFFER, MPI_POINTER PTR_MPI_TARGET_FCP_RSP_BUFFER,
-  MpiTargetFcpRspBuffer, MPI_POINTER pMpiTargetFcpRspBuffer;
-
-/*
- * NOTE: The SPI status IU is big-endian. When used on a little-endian system,
- * this structure properly orders the bytes.
- */
-typedef struct _MPI_TARGET_SCSI_SPI_STATUS_IU
-{
-    U8      Reserved0;                                  /* 00h */
-    U8      Reserved1;                                  /* 01h */
-    U8      Valid;                                      /* 02h */
-    U8      Status;                                     /* 03h */
-    U32     SenseDataListLength;                        /* 04h */
-    U32     PktFailuresListLength;                      /* 08h */
-    U8      SenseData[52]; /* Pad the IU to 64 bytes */ /* 0Ch */
-} MPI_TARGET_SCSI_SPI_STATUS_IU, MPI_POINTER PTR_MPI_TARGET_SCSI_SPI_STATUS_IU,
-  TargetScsiSpiStatusIU_t, MPI_POINTER pTargetScsiSpiStatusIU_t;
-
-/****************************************************************************/
-/* Target Mode Abort Request                                                */
-/****************************************************************************/
-
-typedef struct _MSG_TARGET_MODE_ABORT_REQUEST
-{
-    U8                      AbortType;                  /* 00h */
-    U8                      Reserved;                   /* 01h */
-    U8                      ChainOffset;                /* 02h */
-    U8                      Function;                   /* 03h */
-    U16                     Reserved1;                  /* 04h */
-    U8                      Reserved2;                  /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U32                     ReplyWord;                  /* 0Ch */
-    U32                     MsgContextToAbort;          /* 10h */
-} MSG_TARGET_MODE_ABORT, MPI_POINTER PTR_MSG_TARGET_MODE_ABORT,
-  TargetModeAbort_t, MPI_POINTER pTargetModeAbort_t;
-
-#define TARGET_MODE_ABORT_TYPE_ALL_CMD_BUFFERS      (0x00)
-#define TARGET_MODE_ABORT_TYPE_ALL_IO               (0x01)
-#define TARGET_MODE_ABORT_TYPE_EXACT_IO             (0x02)
-#define TARGET_MODE_ABORT_TYPE_EXACT_IO_REQUEST     (0x03)
-
-/* Target Mode Abort Reply */
-
-typedef struct _MSG_TARGET_MODE_ABORT_REPLY
-{
-    U16                     Reserved;                   /* 00h */
-    U8                      MsgLength;                  /* 02h */
-    U8                      Function;                   /* 03h */
-    U16                     Reserved1;                  /* 04h */
-    U8                      Reserved2;                  /* 06h */
-    U8                      MsgFlags;                   /* 07h */
-    U32                     MsgContext;                 /* 08h */
-    U16                     Reserved3;                  /* 0Ch */
-    U16                     IOCStatus;                  /* 0Eh */
-    U32                     IOCLogInfo;                 /* 10h */
-    U32                     AbortCount;                 /* 14h */
-} MSG_TARGET_MODE_ABORT_REPLY, MPI_POINTER PTR_MSG_TARGET_MODE_ABORT_REPLY,
-  TargetModeAbortReply_t, MPI_POINTER pTargetModeAbortReply_t;
-
-
-/****************************************************************************/
-/* Target Mode Context Reply                                                */
-/****************************************************************************/
-
-#define TARGET_MODE_REPLY_IO_INDEX_MASK         (0x00003FFF)
-#define TARGET_MODE_REPLY_IO_INDEX_SHIFT        (0)
-#define TARGET_MODE_REPLY_INITIATOR_INDEX_MASK  (0x03FFC000)
-#define TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT (14)
-#define TARGET_MODE_REPLY_ALIAS_MASK            (0x04000000)
-#define TARGET_MODE_REPLY_ALIAS_SHIFT           (26)
-#define TARGET_MODE_REPLY_PORT_MASK             (0x10000000)
-#define TARGET_MODE_REPLY_PORT_SHIFT            (28)
-
-
-#define GET_IO_INDEX(x)     (((x) & TARGET_MODE_REPLY_IO_INDEX_MASK)           \
-                                    >> TARGET_MODE_REPLY_IO_INDEX_SHIFT)
-
-#define SET_IO_INDEX(t, i)                                                     \
-            ((t) = ((t) & ~TARGET_MODE_REPLY_IO_INDEX_MASK) |                  \
-                              (((i) << TARGET_MODE_REPLY_IO_INDEX_SHIFT) &     \
-                                             TARGET_MODE_REPLY_IO_INDEX_MASK))
-
-#define GET_INITIATOR_INDEX(x) (((x) & TARGET_MODE_REPLY_INITIATOR_INDEX_MASK) \
-                                   >> TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT)
-
-#define SET_INITIATOR_INDEX(t, ii)                                             \
-        ((t) = ((t) & ~TARGET_MODE_REPLY_INITIATOR_INDEX_MASK) |               \
-                        (((ii) << TARGET_MODE_REPLY_INITIATOR_INDEX_SHIFT) &   \
-                                      TARGET_MODE_REPLY_INITIATOR_INDEX_MASK))
-
-#define GET_ALIAS(x) (((x) & TARGET_MODE_REPLY_ALIAS_MASK)                     \
-                                               >> TARGET_MODE_REPLY_ALIAS_SHIFT)
-
-#define SET_ALIAS(t, a)  ((t) = ((t) & ~TARGET_MODE_REPLY_ALIAS_MASK) |        \
-                                    (((a) << TARGET_MODE_REPLY_ALIAS_SHIFT) &  \
-                                                 TARGET_MODE_REPLY_ALIAS_MASK))
-
-#define GET_PORT(x) (((x) & TARGET_MODE_REPLY_PORT_MASK)                       \
-                                               >> TARGET_MODE_REPLY_PORT_SHIFT)
-
-#define SET_PORT(t, p)  ((t) = ((t) & ~TARGET_MODE_REPLY_PORT_MASK) |          \
-                                    (((p) << TARGET_MODE_REPLY_PORT_SHIFT) &   \
-                                                  TARGET_MODE_REPLY_PORT_MASK))
-
-/* the following obsolete values are for MPI v1.0 support */
-#define TARGET_MODE_REPLY_0100_MASK_HOST_INDEX       (0x000003FF)
-#define TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX      (0)
-#define TARGET_MODE_REPLY_0100_MASK_IOC_INDEX        (0x001FF800)
-#define TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX       (11)
-#define TARGET_MODE_REPLY_0100_PORT_MASK             (0x00400000)
-#define TARGET_MODE_REPLY_0100_PORT_SHIFT            (22)
-#define TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX  (0x1F800000)
-#define TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX (23)
-
-#define GET_HOST_INDEX_0100(x) (((x) & TARGET_MODE_REPLY_0100_MASK_HOST_INDEX) \
-                                  >> TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX)
-
-#define SET_HOST_INDEX_0100(t, hi)                                             \
-            ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_HOST_INDEX) |           \
-                         (((hi) << TARGET_MODE_REPLY_0100_SHIFT_HOST_INDEX) &  \
-                                      TARGET_MODE_REPLY_0100_MASK_HOST_INDEX))
-
-#define GET_IOC_INDEX_0100(x)   (((x) & TARGET_MODE_REPLY_0100_MASK_IOC_INDEX) \
-                                  >> TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX)
-
-#define SET_IOC_INDEX_0100(t, ii)                                              \
-            ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_IOC_INDEX) |            \
-                        (((ii) << TARGET_MODE_REPLY_0100_SHIFT_IOC_INDEX) &    \
-                                     TARGET_MODE_REPLY_0100_MASK_IOC_INDEX))
-
-#define GET_INITIATOR_INDEX_0100(x)                                            \
-            (((x) & TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX)               \
-                              >> TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX)
-
-#define SET_INITIATOR_INDEX_0100(t, ii)                                        \
-        ((t) = ((t) & ~TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX) |          \
-                   (((ii) << TARGET_MODE_REPLY_0100_SHIFT_INITIATOR_INDEX) &   \
-                                TARGET_MODE_REPLY_0100_MASK_INITIATOR_INDEX))
-
-
-#endif
diff --git a/sys/dev/ic/mpt_openbsd.c b/sys/dev/ic/mpt_openbsd.c
deleted file mode 100644
index 4bfb5da3276..00000000000
--- a/sys/dev/ic/mpt_openbsd.c
+++ /dev/null
@@ -1,1578 +0,0 @@
-/*	$OpenBSD: mpt_openbsd.c,v 1.33 2006/04/20 20:29:56 miod Exp $	*/
-/*	$NetBSD: mpt_netbsd.c,v 1.7 2003/07/14 15:47:11 lukem Exp $	*/
-
-/*
- * Copyright (c) 2004 Milos Urbanek
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 2003 Wasabi Systems, Inc.
- * All rights reserved.
- *
- * Written by Jason R. Thorpe for Wasabi Systems, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed for the NetBSD Project by
- *	Wasabi Systems, Inc.
- * 4. The name of Wasabi Systems, Inc. may not be used to endorse
- *    or promote products derived from this software without specific prior
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 2000, 2001 by Greg Ansley
- * Partially derived from Matt Jacob's ISP driver.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice immediately at the beginning of the file, without modification,
- *    this list of conditions, and the following disclaimer.
- * 2. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-/*
- * Additional Copyright (c) 2002 by Matthew Jacob under same license.
- */
-
-/*
- * mpt_openbsd.c:
- *
- * OpenBSD-specific routines for LSI Fusion adapters.  Includes some
- * bus_dma glue, and SCSI glue.
- *
- * Adapted from the NetBSD "mpt" driver by Milos Urbanek for
- * ZOOM International, s.r.o.
- */
-
-#include <sys/cdefs.h>
-/* __KERNEL_RCSID(0, "$NetBSD: mpt_netbsd.c,v 1.7 2003/07/14 15:47:11 lukem Exp $"); */
-
-#include <dev/ic/mpt.h>			/* pulls in all headers */
-
-void	mpt_run_ppr(struct mpt_softc *, int);
-int	mpt_ppr(struct mpt_softc *, struct scsi_link *, int, int);
-int	mpt_poll(struct mpt_softc *, struct scsi_xfer *, int);
-void	mpt_timeout(void *);
-void	mpt_done(struct mpt_softc *, uint32_t);
-int	mpt_run_xfer(struct mpt_softc *, struct scsi_xfer *);
-void	mpt_check_xfer_settings(struct mpt_softc *, struct scsi_xfer *, MSG_SCSI_IO_REQUEST *);
-void	mpt_ctlop(struct mpt_softc *, void *vmsg, uint32_t);
-void	mpt_event_notify_reply(struct mpt_softc *, MSG_EVENT_NOTIFY_REPLY *);
-
-int	mpt_action(struct scsi_xfer *);
-void	mpt_minphys(struct buf *);
-
-struct cfdriver mpt_cd = {
-	NULL, "mpt", DV_DULL
-};
-
-/* the below structure is so we have a default dev struct for our link struct */
-static struct scsi_device mpt_dev = {
-	NULL, /* Use default error handler */
-	NULL, /* have a queue, served by this */
-	NULL, /* have no async handler */
-	NULL, /* Use default 'done' routine */
-};
-
-enum mpt_scsi_speed { U320, U160, U80 };
-
-/*
- * try speed and
- * return 0 if failed
- * return 1 if passed
- */
-int
-mpt_ppr(struct mpt_softc *mpt, struct scsi_link *sc_link, int speed, int flags)
-{
-	CONFIG_PAGE_SCSI_DEVICE_0 page0;
-	CONFIG_PAGE_SCSI_DEVICE_1 page1;
-	uint8_t tp;
-	int error;
-	struct scsi_inquiry_data inqbuf;
-
-	DNPRINTF(30, "Entering PPR\n");
-
-	if (mpt->is_fc) {
-		/*
-		 * SCSI transport settings don't make any sense for
-		 * Fibre Channel; silently ignore the request.
-		 */
-		return 1; /* success */
-	}
-
-	/*
-	 * Always allow disconnect; we don't have a way to disable
-	 * it right now, in any case.
-	 */
-	mpt->mpt_disc_enable |= (1 << sc_link->target);
-
-	/*
-	 * Enable tagged queueing.
-	 */
-	if (sc_link->quirks & SDEV_NOTAGS)
-		mpt->mpt_tag_enable &= ~(1 << sc_link->target);
-	else
-		mpt->mpt_tag_enable |= (1 << sc_link->target);
-
-	page1 = mpt->mpt_dev_page1[sc_link->target];
-
-	/*
-	 * Set the wide/narrow parameter for the target.
-	 */
-	if (sc_link->quirks & SDEV_NOWIDE)
-		page1.RequestedParameters &= ~MPI_SCSIDEVPAGE1_RP_WIDE;
-	else {
-		page1.RequestedParameters |= MPI_SCSIDEVPAGE1_RP_WIDE;
-	}
-
-	/*
-	 * Set the synchronous parameters for the target.
-	 */
-	page1.RequestedParameters &=
-	    ~(MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK |
-	    MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK |
-	    MPI_SCSIDEVPAGE1_RP_DT | MPI_SCSIDEVPAGE1_RP_QAS |
-	    MPI_SCSIDEVPAGE1_RP_IU);
-
-	if (!(sc_link->quirks & SDEV_NOSYNC)) {
-		int factor, offset, np;
-
-		/*
-		 * Factor:
-		 * 0x08 = U320 = 6.25ns
-		 * 0x09 = U160 = 12.5ns
-		 * 0x0a = U80 = 25ns
-		 */
-		factor = (mpt->mpt_port_page0.Capabilities >> 8) & 0xff;
-		offset = (mpt->mpt_port_page0.Capabilities >> 16) & 0xff;
-		np = 0;
-
-		switch (speed) {
-		case U320:
-			/* do nothing */
-			break;
-
-		case U160:
-			factor = 0x09; /* force U160 */
-			break;
-
-		case U80:
-			factor = 0x0a; /* force U80 */
-		}
-
-		if (factor < 0x9) {
-			/* Ultra320 enable QAS & IU */
-			np |= MPI_SCSIDEVPAGE1_RP_QAS | MPI_SCSIDEVPAGE1_RP_IU;
-		}
-		if (factor < 0xa) {
-			/* >= Ultra160 enable DT transfer */
-			np |= MPI_SCSIDEVPAGE1_RP_DT;
-		}
-		np |= (factor << 8) | (offset << 16);
-		page1.RequestedParameters |= np;
-	}
-
-	/* write parameters out to chip */
-	if (mpt_write_cfg_page(mpt, sc_link->target, &page1.Header)) {
-		mpt_prt(mpt, "unable to write Device Page 1");
-		return 0;
-	}
-
-	/* make sure the parameters were written */
-	if (mpt_read_cfg_page(mpt, sc_link->target, &page1.Header)) {
-		mpt_prt(mpt, "unable to read back Device Page 1");
-		return 0;
-	}
-
-	mpt->mpt_dev_page1[sc_link->target] = page1;
-
-	DNPRINTF(30,
-	    "%s: SPI Target %d Page 1: RequestedParameters %x Config %x\n",
-	    DEVNAME(mpt),
-	    sc_link->target,
-	    mpt->mpt_dev_page1[sc_link->target].RequestedParameters,
-	    mpt->mpt_dev_page1[sc_link->target].Configuration);
-
-	/*
-	 * use INQUIRY for PPR two reasons:
-	 * 1) actually transfer data at requested speed
-	 * 2) no need to test for TUR QUIRK
-	 */
-	error = scsi_inquire(sc_link, &inqbuf, flags);
-	if (error) {
-		mpt_prt(mpt, "Invalid INQUIRY on target: %d", sc_link->target);
-		return 0;
-	}
-
-	/* read page 0 back to figure out if the PPR worked */
-	page0 = mpt->mpt_dev_page0[sc_link->target];
-	if (mpt_read_cfg_page(mpt, sc_link->target, &page0.Header)) {
-		mpt_prt(mpt, "unable to read Device Page 0");
-		return 0;
-	}
-
-	DNPRINTF(30,
-	    "%s: SPI Tgt %d Page 0: NParms %x Information %x\n",
-	    DEVNAME(mpt),
-	    sc_link->target,
-	    page0.NegotiatedParameters, page0.Information);
-
-	if (!(page0.NegotiatedParameters & 0x07) && (speed == U320)) {
-		/*
-		 * if lowest 3 aren't set the PPR probably failed,
-		 * retry with other parameters
-		 */
-		DNPRINTF(30, "%s: U320 PPR failed\n", DEVNAME(mpt));
-		return 0;
-	}
-
-	if ((((page0.NegotiatedParameters >> 8) & 0xff) > 0x09) &&
-	    (speed == U160)) {
-		/* if transfer period > 0x09 then U160 PPR failed, retry */
-		DNPRINTF(30, "%s: U160 PPR failed\n", DEVNAME(mpt));
-		return 0;
-	}
-
-	/*
-	 * Bit 3 - PPR rejected:  IOC sets this if the device rejects PPR.
-	 * Bit 2 - WDTR rejected: IOC sets this if the device rejects WDTR.
-	 * Bit 1 - SDTR Rejected: IOC sets this if the device rejects SDTR.
-	 * Bit 0 - 1 A SCSI SDTR, WDTR, or PPR negotiation has occurred.
-	 */
-	if (page0.Information & 0x0e) {
-		/* target rejected PPR message */
-		mpt_prt(mpt, "Target %d rejected PPR message with %02x",
-		    sc_link->target,
-		    (uint8_t)page0.Information);
-
-		return 0;
-	}
-
-	/* print PPR results */
-	switch ((page0.NegotiatedParameters >> 8) & 0xff) {
-	case 0x08:
-		tp = 160;
-		break;
-
-	case 0x09:
-		tp = 80;
-		break;
-
-	case 0x0a:
-		tp = 40;
-		break;
-
-	case 0x0b:
-		tp = 20;
-		break;
-
-	case 0x0c:
-		tp = 10;
-		break;
-
-	default:
-		tp = 0;
-	}
-
-	mpt_prt(mpt,
-	    "target %d %s at %dMHz width %dbit offset %d QAS %d DT %d IU %d",
-	    sc_link->target,
-	    tp ? "Synchronous" : "Asynchronous",
-	    tp,
-	    (page0.NegotiatedParameters & 0x20000000) ? 16 : 8,
-	    (page0.NegotiatedParameters >> 16) & 0xff,
-	    (page0.NegotiatedParameters & 0x04) ? 1 : 0,
-	    (page0.NegotiatedParameters & 0x02) ? 1 : 0,
-	    (page0.NegotiatedParameters & 0x01) ? 1 : 0);
-
-	return 1; /* success */
-}
-
-/*
- * Run PPR on all attached devices
- */
-void
-mpt_run_ppr(struct mpt_softc *mpt, int flags)
-{
-	struct scsi_link *sc_link;
-	struct device *dev;
-	u_int8_t target;
-	u_int16_t buswidth;
-
-	/* walk device list */
-	for (dev = TAILQ_FIRST(&alldevs); dev != NULL;
-	    dev = TAILQ_NEXT(dev, dv_list)) {
-		if (dev->dv_parent == (struct device *)mpt) {
-			/* found scsibus softc */
-			buswidth = ((struct scsi_link *)&mpt->sc_link)->
-			    adapter_buswidth;
-			/* printf("mpt_softc: %x  scsibus: %x  buswidth: %d\n",
-			 *     mpt, dev, buswidth); */
-			/* walk target list */
-			for (target = 0; target < buswidth; target++) {
-				sc_link = ((struct scsibus_softc *)dev)->
-				    sc_link[target][0];
-				if ((sc_link != NULL)) {
-					/* got a device! run PPR */
-					/* skip CPU devices since they
-					 * can crash at U320 speeds */
-					if ((sc_link->inqdata.device & SID_TYPE)
-					    == T_PROCESSOR) {
-						continue;
-					}
-					if (mpt_ppr(mpt, sc_link, U320, flags)){
-						mpt->mpt_negotiated_speed
-						    [target] = U320;
-						continue;
-					}
-
-					if (mpt_ppr(mpt, sc_link, U160, flags)){
-						mpt->mpt_negotiated_speed
-						    [target] = U160;
-						continue;
-					}
-
-					if (mpt_ppr(mpt, sc_link, U80, flags)) {
-						mpt->mpt_negotiated_speed
-						    [target] = U80;
-						continue;
-					}
-				} /* sc_link */
-			} /* for target */
-		} /* if dev */
-	} /* end for dev */
-}
-
-/*
- * Complete attachment of hardware, include subdevices.
- */
-void
-mpt_attach(struct mpt_softc *mpt)
-{
-	struct scsi_link *lptr = &mpt->sc_link;
-
-	mpt->bus = 0;		/* XXX ?? */
-
-	/* Fill in the scsi_adapter. */
-	mpt->sc_adapter.scsi_cmd = mpt_action;
-	mpt->sc_adapter.scsi_minphys = mpt_minphys;
-
-	/* Fill in the prototype scsi_link */
-	lptr->adapter_softc = mpt;
-	lptr->device = &mpt_dev;
-	lptr->adapter = &mpt->sc_adapter;
-	lptr->flags = 0;
-	lptr->luns = 8;
-
-	if (mpt->is_fc) {
-		lptr->adapter_buswidth = 256;
-		lptr->adapter_target = 256;
-	} else {
-		lptr->adapter_buswidth = 16;
-		lptr->adapter_target = mpt->mpt_ini_id;
-	}
-	lptr->openings = MPT_MAX_REQUESTS(mpt) / lptr->adapter_buswidth;
-
-	DNPRINTF(10, "%s: IM support: %x\n", DEVNAME(mpt), mpt->im_support);
-
-	(void) config_found(&mpt->mpt_dev, lptr, scsiprint);
-
-	/* done attaching now walk targets and PPR them */
-	/* FC does not do PPR */
-	if (!mpt->is_fc) {
-		mpt_run_ppr(mpt, SCSI_POLL);
-	}
-}
-
-int
-mpt_dma_mem_alloc(struct mpt_softc *mpt)
-{
-	bus_dma_segment_t reply_seg, request_seg;
-	int reply_rseg, request_rseg;
-	bus_addr_t pptr, end;
-	caddr_t vptr;
-	size_t len;
-	int error, i;
-
-	/* Check if we have already allocated the reply memory. */
-	if (mpt->reply != NULL)
-		return (0);
-
-	/*
-	 * Allocate the request pool.  This isn't really DMA'd memory,
-	 * but it's a convenient place to do it.
-	 */
-	len = sizeof(struct req_entry) * MPT_MAX_REQUESTS(mpt);
-	mpt->request_pool = malloc(len, M_DEVBUF, M_WAITOK);
-	if (mpt->request_pool == NULL) {
-		printf("%s: unable to allocate request pool\n",
-		    mpt->mpt_dev.dv_xname);
-		return (ENOMEM);
-	}
-	bzero(mpt->request_pool, len);
-	
-	/*
-	 * Allocate DMA resources for reply buffers.
-	 */
-	error = bus_dmamap_create(mpt->sc_dmat, PAGE_SIZE, 1, PAGE_SIZE,
-	    0, 0, &mpt->reply_dmap);
-	if (error) {
-		printf("%s: unable to create reply DMA map, error = %d\n",
-		    mpt->mpt_dev.dv_xname, error);
-		goto free_request_pool;
-	}
-
-	error = bus_dmamem_alloc(mpt->sc_dmat, PAGE_SIZE, PAGE_SIZE, 0,
-	    &reply_seg, 1, &reply_rseg, 0);
-	if (error) {
-		printf("%s: unable to allocate reply area, error = %d\n",
-		    mpt->mpt_dev.dv_xname, error);
-		goto destroy_reply;
-	}
-
-	error = bus_dmamem_map(mpt->sc_dmat, &reply_seg, reply_rseg, PAGE_SIZE,
-	    (caddr_t *) &mpt->reply, BUS_DMA_COHERENT/*XXX*/);
-	if (error) {
-		printf("%s: unable to map reply area, error = %d\n",
-		    mpt->mpt_dev.dv_xname, error);
-		goto free_reply;
-	}
-
-	error = bus_dmamap_load(mpt->sc_dmat, mpt->reply_dmap, mpt->reply,
-	    PAGE_SIZE, NULL, 0);
-	if (error) {
-		printf("%s: unable to load reply DMA map, error = %d\n",
-		    mpt->mpt_dev.dv_xname, error);
-		goto unmap_reply;
-	}
-
-	/*
-	 * Allocate DMA resources for request buffers.
-	 */
-	error = bus_dmamap_create(mpt->sc_dmat, MPT_REQ_MEM_SIZE(mpt), 1,
-	    MPT_REQ_MEM_SIZE(mpt), 0, 0, &mpt->request_dmap);
-	if (error) {
-		printf("%s: unable to create request DMA map, error = %d\n",
-		    mpt->mpt_dev.dv_xname, error);
-		goto unload_reply;
-	}
-
-	error = bus_dmamem_alloc(mpt->sc_dmat, MPT_REQ_MEM_SIZE(mpt),
-	    PAGE_SIZE, 0, &request_seg, 1, &request_rseg, 0);
-	if (error) {
-		printf("%s: unable to allocate request area, error = %d\n",
-		    mpt->mpt_dev.dv_xname, error);
-		goto destroy_request;
-	}
-
-	error = bus_dmamem_map(mpt->sc_dmat, &request_seg, request_rseg,
-	    MPT_REQ_MEM_SIZE(mpt), (caddr_t *) &mpt->request, 0);
-	if (error) {
-		printf("%s: unable to map request area, error = %d\n",
-		    mpt->mpt_dev.dv_xname, error);
-		goto free_request;
-	}
-
-	error = bus_dmamap_load(mpt->sc_dmat, mpt->request_dmap, mpt->request,
-	    MPT_REQ_MEM_SIZE(mpt), NULL, 0);
-	if (error) {
-		printf("%s: unable to load request DMA map, error = %d\n",
-		    mpt->mpt_dev.dv_xname, error);
-		goto unmap_request;
-	}
-
-	pptr = mpt->request_dmap->dm_segs[0].ds_addr;
-	vptr = (caddr_t) mpt->request;
-	end = pptr + MPT_REQ_MEM_SIZE(mpt);
-
-	for (i = 0; pptr < end; i++) {
-		struct req_entry *req = &mpt->request_pool[i];
-		req->index = i;
-
-		/* Store location of Request Data */
-		req->req_pbuf = pptr;
-		req->req_vbuf = vptr;
-
-		pptr += MPT_REQUEST_AREA;
-		vptr += MPT_REQUEST_AREA;
-
-		req->sense_pbuf = (pptr - MPT_SENSE_SIZE);
-		req->sense_vbuf = (vptr - MPT_SENSE_SIZE);
-
-		error = bus_dmamap_create(mpt->sc_dmat, MAXPHYS,
-		    MPT_SGL_MAX, MAXPHYS, 0, 0, &req->dmap);
-		if (error) {
-			printf("%s: unable to create req %d DMA map, error = "
-			    "%d", mpt->mpt_dev.dv_xname, i, error);
-			goto unload_request;
-		}
-	}
-
-	mpt->request_phys = mpt->request_dmap->dm_segs[0].ds_addr;
-	mpt->reply_phys = mpt->reply_dmap->dm_segs[0].ds_addr;
-	return (0);
-
-unload_request:	
-	for (--i; i >= 0; i--) {
-		struct req_entry *req = &mpt->request_pool[i];
-		if (req->dmap != NULL)
-			bus_dmamap_destroy(mpt->sc_dmat, req->dmap);
-	}
-	bus_dmamap_unload(mpt->sc_dmat, mpt->request_dmap);
-unmap_request:
-	bus_dmamem_unmap(mpt->sc_dmat, (caddr_t)mpt->request, PAGE_SIZE);
-free_request:
-	bus_dmamem_free(mpt->sc_dmat, &request_seg, 1);
-destroy_request:
-	bus_dmamap_destroy(mpt->sc_dmat, mpt->request_dmap);
-
-unload_reply:
-	bus_dmamap_unload(mpt->sc_dmat, mpt->reply_dmap);
-unmap_reply:
-	bus_dmamem_unmap(mpt->sc_dmat, (caddr_t)mpt->reply, PAGE_SIZE);
-free_reply:
-	bus_dmamem_free(mpt->sc_dmat, &reply_seg, 1);
-destroy_reply:
-	bus_dmamap_destroy(mpt->sc_dmat, mpt->reply_dmap);
-	
-free_request_pool:
-	free(mpt->request_pool, M_DEVBUF);
-
-	mpt->reply = NULL;
-	mpt->request = NULL;
-	mpt->request_pool = NULL;
-
-	return (error);
-}
-
-int
-mpt_intr(void *arg)
-{
-	struct mpt_softc *mpt = arg;
-	int nrepl = 0;
-	uint32_t reply;
-
-	/*
-	if ((mpt_read(mpt, MPT_OFFSET_INTR_STATUS) & MPT_INTR_REPLY_READY) == 0)
-		return (0);
-	*/
-
-	/*
-	 * Speed up trick to save one PCI read.
-	 * Reply FIFO replies 0xffffffff whenever
-	 * MPT_OFFSET_INTR_STATUS & MPT_INTR_REPLY_READY == 0
-	 *
-	 */
-
-	reply = mpt_pop_reply_queue(mpt);
-
-	if (reply == 0xffffffff) {
-		/* check doorbell, this is error path not IO path */
-		/* FIXME for now ignore strays and doorbells */
-		return (0);
-	}
-
-	while (reply != MPT_REPLY_EMPTY) {
-		nrepl++;
-#ifdef MPT_DEBUG
-		if (mpt_debug > 50) {
-			if ((reply & MPT_CONTEXT_REPLY) != 0)
-				/* Address reply; IOC has something to say */
-				mpt_print_reply(MPT_REPLY_PTOV(mpt, reply));
-			else
-				/* Context reply; all went well */
-				mpt_prt(mpt, "context %u reply OK", reply);
-		}
-#endif /* MPT_DEBUG */
-		mpt_done(mpt, reply);
-		reply = mpt_pop_reply_queue(mpt);
-	}
-	return (nrepl != 0);
-}
-
-void
-mpt_prt(struct mpt_softc *mpt, const char *fmt, ...)
-{
-	va_list ap;
-
-	printf("%s: ", mpt->mpt_dev.dv_xname);
-	va_start(ap, fmt);
-	vprintf(fmt, ap);
-	va_end(ap);
-	printf("\n");
-}
-
-int
-mpt_poll(struct mpt_softc *mpt, struct scsi_xfer *xs, int count)
-{
-
-	/* Timeouts are in msec, so we loop in 1000usec cycles */
-	while (count) {
-		mpt_intr(mpt);
-		if (xs->flags & ITSDONE) {
-			return (0);
-		}
-		delay(1000);		/* only happens in boot, so ok */
-		count--;
-	}
-	return (1);
-}
-
-void
-mpt_timeout(void *arg)
-{
-	struct req_entry *req = arg;
-	struct scsi_xfer *xs = req->xfer;
-	struct scsi_link *linkp = xs->sc_link;
-	struct mpt_softc *mpt = (void *) linkp->adapter_softc;
-	uint32_t oseq;
-	int s, index;
-
-	mpt_prt(mpt, "command timeout");
-	sc_print_addr(linkp);
-
-	s = splbio();
-
-	oseq = req->sequence;
-	mpt->timeouts++;
-	if (mpt_intr(mpt)) {
-		if (req->sequence != oseq) {
-			mpt_prt(mpt, "recovered from command timeout");
-			splx(s);
-			return;
-		}
-	}
-	mpt_prt(mpt,
-	    "timeout on request index = 0x%x, seq = 0x%08x",
-	    req->index, req->sequence);
-	mpt_check_doorbell(mpt);
-	mpt_prt(mpt, "Status 0x%08x, Mask 0x%08x, Doorbell 0x%08x",
-	    mpt_read(mpt, MPT_OFFSET_INTR_STATUS),
-	    mpt_read(mpt, MPT_OFFSET_INTR_MASK),
-	    mpt_read(mpt, MPT_OFFSET_DOORBELL));
-#ifdef MPT_DEBUG
-	mpt_prt(mpt, "request state: %s", mpt_req_state(req->debug));
-	mpt_print_scsi_io_request((MSG_SCSI_IO_REQUEST *)req->req_vbuf);
-#else
-	mpt_prt(mpt, "request state: %i", req->debug);
-#endif /* MPT_DEBUG */
-
-	for(index = 0; index < MPT_MAX_REQUESTS(mpt); index++)
-		if (req == &mpt->request_pool[index]) {
-			req->debug = REQ_TIMEOUT;
-			break;
-		}
-
-	mpt_done(mpt, index);
-
-	splx(s);
-}
-
-void
-mpt_done(struct mpt_softc *mpt, uint32_t reply)
-{
-	struct scsi_xfer *xs = NULL;
-	struct scsi_link *linkp;
-	int index;
-	struct req_entry *req;
-	MSG_REQUEST_HEADER *mpt_req;
-	MSG_SCSI_IO_REPLY *mpt_reply;
-
-
-	if ((reply & MPT_CONTEXT_REPLY) == 0) {
-		/* context reply (ok) */
-		mpt_reply = NULL;
-		index = reply & MPT_CONTEXT_MASK;
-	} else {
-		/* address reply (error) */
-
-		/* XXX BUS_DMASYNC_POSTREAD XXX */
-		mpt_reply = MPT_REPLY_PTOV(mpt, reply);
-#ifdef MPT_DEBUG
-		if (mpt_debug > 50) {
-			uint32_t *pReply = (uint32_t *) mpt_reply;
-
-			mpt_prt(mpt, "Address Reply (index %u):",
-			    mpt_reply->MsgContext & 0xffff);
-			mpt_prt(mpt, "%08x %08x %08x %08x",
-			    pReply[0], pReply[1], pReply[2], pReply[3]);
-			mpt_prt(mpt, "%08x %08x %08x %08x",
-			    pReply[4], pReply[5], pReply[6], pReply[7]);
-			mpt_prt(mpt, "%08x %08x %08x %08x",
-			    pReply[8], pReply[9], pReply[10], pReply[11]);
-		}
-#endif /* MPT_DEBUG */
-		index = mpt_reply->MsgContext;
-	}
-
-	/*
-	 * Address reply with MessageContext high bit set.
-	 * This is most likely a notify message, so we try
-	 * to process it, then free it.
-	 */
-	if ((index & 0x80000000) != 0) {
-		if (mpt_reply != NULL)
-			mpt_ctlop(mpt, mpt_reply, reply);
-		else
-			mpt_prt(mpt, "mpt_done: index 0x%x, NULL reply", index);
-		return;
-	}
-
-	/* Did we end up with a valid index into the table? */
-	if (index < 0 || index >= MPT_MAX_REQUESTS(mpt)) {
-		mpt_prt(mpt, "mpt_done: invalid index (0x%x) in reply", index);
-		return;
-	}
-
-	req = &mpt->request_pool[index];
-
-	/* Make sure memory hasn't been trashed. */
-	if (req->index != index) {
-		mpt_prt(mpt, "mpt_done: corrupted struct req_entry (0x%x)", index);
-		return;
-	}
-
-	MPT_SYNC_REQ(mpt, req, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
-	mpt_req = req->req_vbuf;
-
-	/* Short cut for task management replies; nothing more for us to do. */
-	if (mpt_req->Function == MPI_FUNCTION_SCSI_TASK_MGMT) {
-		DNPRINTF(50, "%s: mpt_done: TASK MGMT\n", DEVNAME(mpt));
-		goto done;
-	}
-
-	if (mpt_req->Function == MPI_FUNCTION_PORT_ENABLE)
-		goto done;
-
-	/*
-	 * At this point, it had better be a SCSI I/O command, but don't
-	 * crash if it isn't.
-	 */
-	if (mpt_req->Function != MPI_FUNCTION_SCSI_IO_REQUEST) {
-		DNPRINTF(10, "%s: mpt_done: unknown Function 0x%x (0x%x)\n",
-		    DEVNAME(mpt), mpt_req->Function, index);
-		goto done;
-	}
-
-	/* Recover scsi_xfer from the request structure. */
-	xs = req->xfer;
-
-	/* Can't have a SCSI command without a scsi_xfer. */
-	if (xs == NULL) {
-		mpt_prt(mpt,
-		    "mpt_done: no scsi_xfer, index = 0x%x, seq = 0x%08x",
-		    req->index, req->sequence);
-#ifdef MPT_DEBUG
-		mpt_prt(mpt, "request state: %s", mpt_req_state(req->debug));
-		mpt_prt(mpt, "mpt_request:");
-		mpt_print_scsi_io_request((MSG_SCSI_IO_REQUEST *)req->req_vbuf);
-#else
-		mpt_prt(mpt, "request state: %i", req->debug);
-#endif /* MPT_DEBUG */
-
-		if (mpt_reply != NULL) {
-#ifdef MPT_DEBUG
-			mpt_prt(mpt, "mpt_reply:");
-			mpt_print_reply(mpt_reply);
-#endif /* MPT_DEBUG */
-		} else {
-			mpt_prt(mpt, "context reply: 0x%08x", reply);
-		}
-		goto done;
-	}
-
-	timeout_del(&xs->stimeout);
-
-	linkp = xs->sc_link;
-
-	/*
-	 * If we were a data transfer, unload the map that described
-	 * the data buffer.
-	 */
-	if (xs->datalen != 0) {
-		bus_dmamap_sync(mpt->sc_dmat, req->dmap, 0,
-		    req->dmap->dm_mapsize,
-		    (xs->flags & SCSI_DATA_IN) ? BUS_DMASYNC_POSTREAD
-						      : BUS_DMASYNC_POSTWRITE);
-		bus_dmamap_unload(mpt->sc_dmat, req->dmap);
-	}
-
-	if (req->debug == REQ_TIMEOUT) {
-		xs->error = XS_TIMEOUT;
-		xs->status = SCSI_OK;
-		xs->resid = 0;
-		goto done;
-	} else if (mpt_reply == NULL) {
-		/*
-		 * Context reply; report that the command was
-		 * successful!
-		 *
-		 * Also report the xfer mode, if necessary.
-		 */
-		xs->error = XS_NOERROR;
-		xs->status = SCSI_OK;
-		xs->resid = 0;
-		goto done;
-	}
-
-	xs->status = mpt_reply->SCSIStatus;
-	switch (mpt_reply->IOCStatus) {
-	case MPI_IOCSTATUS_SCSI_DATA_OVERRUN:
-		xs->error = XS_DRIVER_STUFFUP;
-		break;
-
-	case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN:
-		/*
-		 * Yikes!  Tagged queue full comes through this path!
-		 *
-		 * So we'll change it to a status error and anything
-		 * that returns status should probably be a status
-		 * error as well.
-		 */
-		xs->resid = xs->datalen - mpt_reply->TransferCount;
-		if (mpt_reply->SCSIState &
-		    MPI_SCSI_STATE_NO_SCSI_STATUS) {
-			xs->error = XS_DRIVER_STUFFUP;
-			break;
-		}
-		/* FALLTHROUGH */
-	case MPI_IOCSTATUS_SUCCESS:
-	case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR:
-		switch (xs->status) {
-		case SCSI_OK:
-			xs->resid = 0;
-			break;
-
-		case SCSI_CHECK:
-			xs->error = XS_SENSE;
-			break;
-
-		case SCSI_BUSY:
-			xs->error = XS_BUSY;
-			break;
-
-		case SCSI_QUEUE_FULL:
-			xs->error = XS_TIMEOUT;
-			xs->retries++;
-			break;
-		default:
-			sc_print_addr(linkp);
-			mpt_prt(mpt, "invalid status code %d", xs->status);
-			xs->error = XS_DRIVER_STUFFUP;
-			break;
-		}
-		break;
-
-	case MPI_IOCSTATUS_BUSY:
-	case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES:
-		xs->error = XS_BUSY;
-		break;
-
-	case MPI_IOCSTATUS_SCSI_INVALID_BUS:
-	case MPI_IOCSTATUS_SCSI_INVALID_TARGETID:
-	case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
-		xs->error = XS_SELTIMEOUT;
-		break;
-
-	case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
-		xs->error = XS_DRIVER_STUFFUP;
-		break;
-
-	case MPI_IOCSTATUS_SCSI_TASK_TERMINATED:
-		xs->error = XS_DRIVER_STUFFUP;
-		break;
-
-	case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
-		/* XXX */
-		xs->error = XS_DRIVER_STUFFUP;
-		break;
-
-	case MPI_IOCSTATUS_SCSI_IOC_TERMINATED:
-		/* XXX */
-		xs->error = XS_DRIVER_STUFFUP;
-		break;
-
-	case MPI_IOCSTATUS_SCSI_EXT_TERMINATED:
-		/* XXX This is a bus-reset */
-		xs->error = XS_DRIVER_STUFFUP;
-		break;
-
-	default:
-		/* XXX unrecognized HBA error */
-		xs->error = XS_DRIVER_STUFFUP;
-		break;
-	}
-
-	if (mpt_reply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_VALID) {
-		memcpy(&xs->sense, req->sense_vbuf,
-		    sizeof(xs->sense));
-	} else if (mpt_reply->SCSIState & MPI_SCSI_STATE_AUTOSENSE_FAILED) {
-		/*
-		 * This will cause the scsi layer to issue
-		 * a REQUEST SENSE.
-		 */
-		if (xs->status == SCSI_CHECK)
-			xs->error = XS_BUSY;
-	}
-
- done:
-	/* If IOC done with this requeset, free it up. */
-	if (mpt_reply == NULL || (mpt_reply->MsgFlags & 0x80) == 0)
-		mpt_free_request(mpt, req);
-
-	/* If address reply, give the buffer back to the IOC. */
-	if (mpt_reply != NULL)
-		mpt_free_reply(mpt, (reply << 1));
-
-	if (xs != NULL) {
-		xs->flags |= ITSDONE;
-		scsi_done(xs);
-	}
-}
-
-int
-mpt_run_xfer(struct mpt_softc *mpt, struct scsi_xfer *xs)
-{
-	struct scsi_link *linkp = xs->sc_link;
-	struct req_entry *req;
-	MSG_SCSI_IO_REQUEST *mpt_req;
-	int error, s;
-
-	s = splbio();
-	req = mpt_get_request(mpt);
-	if (req == NULL) {
-		/* This should happen very infrequently. */
-		xs->error = XS_DRIVER_STUFFUP;
-		xs->flags |= ITSDONE;
-		scsi_done(xs);
-		splx(s);
-		return (COMPLETE);
-	}
-	splx(s);
-
-	/* Link the req and the scsi_xfer. */
-	req->xfer = xs;
-
-	/* Now we build the command for the IOC */
-	mpt_req = req->req_vbuf;
-	bzero(mpt_req, sizeof(*mpt_req));
-
-	mpt_req->Function = MPI_FUNCTION_SCSI_IO_REQUEST;
-	mpt_req->Bus = mpt->bus;
-
-	mpt_req->SenseBufferLength =
-	    (sizeof(xs->sense) < MPT_SENSE_SIZE) ?
-	    sizeof(xs->sense) : MPT_SENSE_SIZE;
-
-	/*
-	 * We use the message context to find the request structure when
-	 * we get the command completion interrupt from the IOC.
-	 */
-	mpt_req->MsgContext = req->index;
-
-	/* Which physical device to do the I/O on. */
-	mpt_req->TargetID = linkp->target;
-	mpt_req->LUN[1] = linkp->lun;
-
-	/* Set the direction of the transfer. */
-	if (xs->flags & SCSI_DATA_IN)
-		mpt_req->Control = MPI_SCSIIO_CONTROL_READ;
-	else if (xs->flags & SCSI_DATA_OUT)
-		mpt_req->Control = MPI_SCSIIO_CONTROL_WRITE;
-	else
-		mpt_req->Control = MPI_SCSIIO_CONTROL_NODATATRANSFER;
-
-	mpt_check_xfer_settings(mpt, xs, mpt_req);
-
-	/* Copy the SCSI command block into place. */
-	memcpy(mpt_req->CDB, xs->cmd, xs->cmdlen);
-
-	mpt_req->CDBLength = xs->cmdlen;
-	mpt_req->DataLength = xs->datalen;
-	mpt_req->SenseBufferLowAddr = req->sense_pbuf;
-
-	/*
-	 * Map the DMA transfer.
-	 */
-	if (xs->datalen) {
-		SGE_SIMPLE32 *se;
-
-		error = bus_dmamap_load(mpt->sc_dmat, req->dmap, xs->data,
-		    xs->datalen, NULL,
-		    ((xs->flags & SCSI_NOSLEEP) ? BUS_DMA_NOWAIT
-						       : BUS_DMA_WAITOK) |
-		    BUS_DMA_STREAMING |
-		    ((xs->flags & SCSI_DATA_IN) ? BUS_DMA_READ
-						       : BUS_DMA_WRITE));
-		switch (error) {
-		case 0:
-			break;
-
-		case ENOMEM:
-		case EAGAIN:
-			xs->error = XS_DRIVER_STUFFUP;
-			goto out_bad;
-		default:
-			mpt_prt(mpt, "error %d loading DMA map", error);
- out_bad:
-			s = splbio();
-			mpt_free_request(mpt, req);
-			splx(s);
-			return (TRY_AGAIN_LATER);
-		}
-
-		if (req->dmap->dm_nsegs > MPT_NSGL_FIRST(mpt)) {
-			int seg, i, nleft = req->dmap->dm_nsegs;
-			uint32_t flags;
-			SGE_CHAIN32 *ce;
-
-			seg = 0;
-
-			mpt_req->DataLength = xs->datalen;
-			flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT;
-			if (xs->flags & SCSI_DATA_OUT)
-				flags |= MPI_SGE_FLAGS_HOST_TO_IOC;
-
-			se = (SGE_SIMPLE32 *) &mpt_req->SGL;
-			for (i = 0; i < MPT_NSGL_FIRST(mpt) - 1;
-			    i++, se++, seg++) {
-				uint32_t tf;
-
-				bzero(se, sizeof(*se));
-				se->Address = req->dmap->dm_segs[seg].ds_addr;
-				MPI_pSGE_SET_LENGTH(se,
-				    req->dmap->dm_segs[seg].ds_len);
-				tf = flags;
-				if (i == MPT_NSGL_FIRST(mpt) - 2)
-					tf |= MPI_SGE_FLAGS_LAST_ELEMENT;
-				MPI_pSGE_SET_FLAGS(se, tf);
-				nleft--;
-			}
-
-			/*
-			 * Tell the IOC where to find the first chain element.
-			 */
-			mpt_req->ChainOffset =
-			    ((char *)se - (char *)mpt_req) >> 2;
-
-			/*
-			 * Until we're finished with all segments...
-			 */
-			while (nleft) {
-				int ntodo;
-
-				/*
-				 * Construct the chain element that points to
-				 * the next segment.
-				 */
-				ce = (SGE_CHAIN32 *) se++;
-				if (nleft > MPT_NSGL(mpt)) {
-					ntodo = MPT_NSGL(mpt) - 1;
-					ce->NextChainOffset = (MPT_RQSL(mpt) -
-					    sizeof(SGE_SIMPLE32)) >> 2;
-					ce->Length = MPT_NSGL(mpt)
-						* sizeof(SGE_SIMPLE32);
-				} else {
-					ntodo = nleft;
-					ce->NextChainOffset = 0;
-					ce->Length = ntodo
-						* sizeof(SGE_SIMPLE32);
-				}
-				ce->Address = req->req_pbuf +
-				    ((char *)se - (char *)mpt_req);
-				ce->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
-				for (i = 0; i < ntodo; i++, se++, seg++) {
-					uint32_t tf;
-
-					bzero(se, sizeof(*se));
-					se->Address =
-					    req->dmap->dm_segs[seg].ds_addr;
-					MPI_pSGE_SET_LENGTH(se,
-					    req->dmap->dm_segs[seg].ds_len);
-					tf = flags;
-					if (i == ntodo - 1) {
-						tf |=
-						    MPI_SGE_FLAGS_LAST_ELEMENT;
-						if (ce->NextChainOffset == 0) {
-							tf |=
-						    MPI_SGE_FLAGS_END_OF_LIST |
-						    MPI_SGE_FLAGS_END_OF_BUFFER;
-						}
-					}
-					MPI_pSGE_SET_FLAGS(se, tf);
-					nleft--;
-				}
-			}
-			bus_dmamap_sync(mpt->sc_dmat, req->dmap, 0,
-			    req->dmap->dm_mapsize,
-			    (xs->flags & SCSI_DATA_IN) ? BUS_DMASYNC_PREREAD :
-			    BUS_DMASYNC_PREWRITE);
-		} else {
-			int i;
-			uint32_t flags;
-
-			mpt_req->DataLength = xs->datalen;
-			flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT;
-			if (xs->flags & SCSI_DATA_OUT)
-				flags |= MPI_SGE_FLAGS_HOST_TO_IOC;
-
-			/* Copy the segments into our SG list. */
-			se = (SGE_SIMPLE32 *) &mpt_req->SGL;
-			for (i = 0; i < req->dmap->dm_nsegs;
-			    i++, se++) {
-				uint32_t tf;
-
-				bzero(se, sizeof(*se));
-				se->Address = req->dmap->dm_segs[i].ds_addr;
-				MPI_pSGE_SET_LENGTH(se,
-				    req->dmap->dm_segs[i].ds_len);
-				tf = flags;
-				if (i == req->dmap->dm_nsegs - 1) {
-					tf |=
-					    MPI_SGE_FLAGS_LAST_ELEMENT |
-					    MPI_SGE_FLAGS_END_OF_BUFFER |
-					    MPI_SGE_FLAGS_END_OF_LIST;
-				}
-				MPI_pSGE_SET_FLAGS(se, tf);
-			}
-			bus_dmamap_sync(mpt->sc_dmat, req->dmap, 0,
-			    req->dmap->dm_mapsize,
-			    (xs->flags & SCSI_DATA_IN) ? BUS_DMASYNC_PREREAD :
-			    BUS_DMASYNC_PREWRITE);
-		}
-	} else {
-		/*
-		 * No data to transfer; just make a single simple SGL
-		 * with zero length.
-		 */
-		SGE_SIMPLE32 *se = (SGE_SIMPLE32 *) &mpt_req->SGL;
-		bzero(se, sizeof(*se));
-		MPI_pSGE_SET_FLAGS(se,
-		    (MPI_SGE_FLAGS_LAST_ELEMENT | MPI_SGE_FLAGS_END_OF_BUFFER |
-		    MPI_SGE_FLAGS_SIMPLE_ELEMENT | MPI_SGE_FLAGS_END_OF_LIST));
-	}
-
-#ifdef MPT_DEBUG
-	if (mpt_debug > 50)
-		mpt_print_scsi_io_request(mpt_req);
-#endif /* MPT_DEBUG */
-
-	s = splbio();
-
-	/* Always reset xs->stimeout, lest we timeout_del() with trash */
-	timeout_set(&xs->stimeout, mpt_timeout, req);
-
-	if ((xs->flags & SCSI_POLL) == 0)
-		timeout_add(&xs->stimeout, mstohz(xs->timeout));
-	mpt_send_cmd(mpt, req);
-	splx(s);
-
-	if ((xs->flags & SCSI_POLL) == 0) {
-		return (SUCCESSFULLY_QUEUED);
-	}
-	/*
-	 * If we can't use interrupts, poll on completion.
-	 */
-	if (mpt_poll(mpt, xs, xs->timeout)) {
-		mpt_timeout(req);
-		/* XXX scsi_done called
-		return (TRY_AGAIN_LATER);
-		*/
-		/* XXX MP this does not look correct */
-		return (COMPLETE);
-	}
-
-	return (COMPLETE);
-}
-
-void
-mpt_ctlop(struct mpt_softc *mpt, void *vmsg, uint32_t reply)
-{
-	MSG_DEFAULT_REPLY *dmsg = vmsg;
-
-	switch (dmsg->Function) {
-	case MPI_FUNCTION_EVENT_NOTIFICATION:
-		mpt_event_notify_reply(mpt, vmsg);
-		mpt_free_reply(mpt, (reply << 1));
-		break;
-
-	case MPI_FUNCTION_EVENT_ACK:
-		mpt_free_reply(mpt, (reply << 1));
-		break;
-
-	case MPI_FUNCTION_PORT_ENABLE:
-	    {
-		MSG_PORT_ENABLE_REPLY *msg = vmsg;
-		int index = msg->MsgContext & ~0x80000000;
-
-		DNPRINTF(10, "%s: enable port reply index %d\n",
-		    DEVNAME(mpt), index);
-
-		if (index >= 0 && index < MPT_MAX_REQUESTS(mpt)) {
-			struct req_entry *req = &mpt->request_pool[index];
-			req->debug = REQ_DONE;
-		}
-		mpt_free_reply(mpt, (reply << 1));
-		break;
-	    }
-
-	case MPI_FUNCTION_CONFIG:
-	    {
-		MSG_CONFIG_REPLY *msg = vmsg;
-		int index = msg->MsgContext & ~0x80000000;
-		if (index >= 0 && index < MPT_MAX_REQUESTS(mpt)) {
-			struct req_entry *req = &mpt->request_pool[index];
-			req->debug = REQ_DONE;
-			req->sequence = reply;
-		} else
-			mpt_free_reply(mpt, (reply << 1));
-		break;
-	    }
-
-	default:
-		mpt_prt(mpt, "unknown ctlop: 0x%x", dmsg->Function);
-	}
-}
-
-void
-mpt_event_notify_reply(struct mpt_softc *mpt, MSG_EVENT_NOTIFY_REPLY *msg)
-{
-
-	switch (msg->Event) {
-	case MPI_EVENT_LOG_DATA:
-	    {
-		int i;
-
-		/* Some error occurrerd that the Fusion wants logged. */
-		mpt_prt(mpt, "EvtLogData: IOCLogInfo: 0x%08x", msg->IOCLogInfo);
-		mpt_prt(mpt, "EvtLogData: Event Data:");
-		for (i = 0; i < msg->EventDataLength; i++) {
-			if ((i % 4) == 0)
-				printf("%s:\t", mpt->mpt_dev.dv_xname);
-			printf("0x%08x%c", msg->Data[i],
-			    ((i % 4) == 3) ? '\n' : ' ');
-		}
-		if ((i % 4) != 0)
-			printf("\n");
-		break;
-	    }
-
-	case MPI_EVENT_UNIT_ATTENTION:
-		mpt_prt(mpt, "Unit Attn: Bus 0x%02x Target 0x%02x",
-		    (msg->Data[0] >> 8) & 0xff, msg->Data[0] & 0xff);
-		break;
-
-	case MPI_EVENT_IOC_BUS_RESET:
-		/* We generated a bus reset. */
-		mpt_prt(mpt, "IOC Bus Reset Port %d",
-		    (msg->Data[0] >> 8) & 0xff);
-		break;
-
-	case MPI_EVENT_EXT_BUS_RESET:
-		/* Someone else generated a bus reset. */
-		mpt_prt(mpt, "External Bus Reset");
-		/*
-		 * These replies don't return EventData like the MPI
-		 * spec says they do.
-		 */
-		/* XXX Send an async event? */
-		break;
-
-	case MPI_EVENT_RESCAN:
-		/*
-		 * In general, thise means a device has been added
-		 * to the loop.
-		 */
-		mpt_prt(mpt, "Rescan Port %d", (msg->Data[0] >> 8) & 0xff);
-		/* XXX Send an async event? */
-		break;
-
-	case MPI_EVENT_LINK_STATUS_CHANGE:
-		mpt_prt(mpt, "Port %d: Link state %s",
-		    (msg->Data[1] >> 8) & 0xff,
-		    (msg->Data[0] & 0xff) == 0 ? "Failed" : "Active");
-		break;
-
-	case MPI_EVENT_LOOP_STATE_CHANGE:
-		switch ((msg->Data[0] >> 16) & 0xff) {
-		case 0x01:
-			mpt_prt(mpt,
-			    "Port %d: FC Link Event: LIP(%02x,%02x) "
-			    "(Loop Initialization)",
-			    (msg->Data[1] >> 8) & 0xff,
-			    (msg->Data[0] >> 8) & 0xff,
-			    (msg->Data[0]     ) & 0xff);
-			switch ((msg->Data[0] >> 8) & 0xff) {
-			case 0xf7:
-				if ((msg->Data[0] & 0xff) == 0xf7)
-					mpt_prt(mpt, "\tDevice needs AL_PA");
-				else
-					mpt_prt(mpt, "\tDevice %02x doesn't "
-					    "like FC performance",
-					    msg->Data[0] & 0xff);
-				break;
-
-			case 0xf8:
-				if ((msg->Data[0] & 0xff) == 0xf7)
-					mpt_prt(mpt, "\tDevice detected loop "
-					    "failure before acquiring AL_PA");
-				else
-					mpt_prt(mpt, "\tDevice %02x detected "
-					    "loop failure",
-					    msg->Data[0] & 0xff);
-				break;
-
-			default:
-				mpt_prt(mpt, "\tDevice %02x requests that "
-				    "device %02x reset itself",
-				    msg->Data[0] & 0xff,
-				    (msg->Data[0] >> 8) & 0xff);
-				break;
-			}
-			break;
-
-		case 0x02:
-			mpt_prt(mpt, "Port %d: FC Link Event: LPE(%02x,%02x) "
-			    "(Loop Port Enable)",
-			    (msg->Data[1] >> 8) & 0xff,
-			    (msg->Data[0] >> 8) & 0xff,
-			    (msg->Data[0]     ) & 0xff);
-			break;
-
-		case 0x03:
-			mpt_prt(mpt, "Port %d: FC Link Event: LPB(%02x,%02x) "
-			    "(Loop Port Bypass)",
-			    (msg->Data[1] >> 8) & 0xff,
-			    (msg->Data[0] >> 8) & 0xff,
-			    (msg->Data[0]     ) & 0xff);
-			break;
-
-		default:
-			mpt_prt(mpt, "Port %d: FC Link Event: "
-			    "Unknown event (%02x %02x %02x)",
-			    (msg->Data[1] >>  8) & 0xff,
-			    (msg->Data[0] >> 16) & 0xff,
-			    (msg->Data[0] >>  8) & 0xff,
-			    (msg->Data[0]      ) & 0xff);
-			break;
-		}
-		break;
-
-	case MPI_EVENT_LOGOUT:
-		mpt_prt(mpt, "Port %d: FC Logout: N_PortID: %02x",
-		    (msg->Data[1] >> 8) & 0xff, msg->Data[0]);
-		break;
-
-	case MPI_EVENT_EVENT_CHANGE:
-		/*
-		 * This is just an acknowledgement of our
-		 * mpt_send_event_request().
-		 */
-		break;
-
-	default:
-		mpt_prt(mpt, "Unknown async event: 0x%x", msg->Event);
-		break;
-	}
-
-	if (msg->AckRequired) {
-		MSG_EVENT_ACK *ackp;
-		struct req_entry *req;
-
-		if ((req = mpt_get_request(mpt)) == NULL) {
-			/* XXX XXX XXX XXXJRT */
-			panic("mpt_event_notify_reply: unable to allocate "
-			    "request structure");
-		}
-
-		ackp = (MSG_EVENT_ACK *) req->req_vbuf;
-		bzero(ackp, sizeof(*ackp));
-		ackp->Function = MPI_FUNCTION_EVENT_ACK;
-		ackp->Event = msg->Event;
-		ackp->EventContext = msg->EventContext;
-		ackp->MsgContext = req->index | 0x80000000;
-		mpt_check_doorbell(mpt);
-		mpt_send_cmd(mpt, req);
-	}
-}
-
-void
-mpt_check_xfer_settings(struct mpt_softc *mpt, struct scsi_xfer *xs, MSG_SCSI_IO_REQUEST *mpt_req)
-{
-	if (mpt->is_fc) {
-		/*
-		 * SCSI transport settings don't make any sense for
-		 * Fibre Channel; silently ignore the request.
-		 */
-		return;
-	}
-
-	/*
-	 * XXX never do these commands with tags. Should really be
-	 * in a higher layer.
-	 */
-	if (xs->cmd->opcode == INQUIRY ||
-	    xs->cmd->opcode == TEST_UNIT_READY ||
-	    xs->cmd->opcode == REQUEST_SENSE)
-		return;
-
-	/* Set the queue behavior. */
-	if (mpt->is_fc || (mpt->mpt_tag_enable & (1 << xs->sc_link->target))) {
-			mpt_req->Control |= MPI_SCSIIO_CONTROL_SIMPLEQ;
-	} else {
-		mpt_req->Control |= MPI_SCSIIO_CONTROL_UNTAGGED;
-		mpt_req->Control |= MPI_SCSIIO_CONTROL_NO_DISCONNECT;
-	}
-}
-
-/*****************************************************************************
- * SCSI interface routines
- *****************************************************************************/
-
-int
-mpt_action(struct scsi_xfer *xfer)
-{
-	struct mpt_softc *mpt = (void *) xfer->sc_link->adapter_softc;
-	int ret;
-
-	ret = mpt_run_xfer(mpt, xfer);
-
-	return ret;
-}
-
-void
-mpt_minphys(struct buf *bp)
-{
-
-/*
- * Subtract one from the SGL limit, since we need an extra one to handle
- * an non-page-aligned transfer.
- */
-#define	MPT_MAX_XFER	((MPT_SGL_MAX - 1) * PAGE_SIZE)
-
-	if (bp->b_bcount > MPT_MAX_XFER)
-		bp->b_bcount = MPT_MAX_XFER;
-	minphys(bp);
-}
-
-/*
- * Allocate DMA resources for FW image
- *
- * img_sz : size of image
- * maxsgl : maximum number of DMA segments
- */
-int
-mpt_alloc_fw_mem(struct mpt_softc *mpt, int maxsgl)
-{
-	int error, rseg;
-
-	error = bus_dmamap_create(mpt->sc_dmat, mpt->fw_image_size, maxsgl,
-	    mpt->fw_image_size, 0, 0, &mpt->fw_dmap);
-	if (error) {
-		mpt_prt(mpt, "unable to create request DMA map, error = %d",
-		    error);
-		return (error);
-	}
-
-	error = bus_dmamem_alloc(mpt->sc_dmat, mpt->fw_image_size, PAGE_SIZE, 0,
-		&mpt->fw_seg, 1, &rseg, 0);
-	if (error) {
-		mpt_prt(mpt, "unable to allocate fw memory, error = %d", error);
-		goto destroy;
-	}
-
-	error = bus_dmamem_map(mpt->sc_dmat, &mpt->fw_seg, 1,
-	    mpt->fw_image_size, (caddr_t *)&mpt->fw, BUS_DMA_COHERENT);
-	if (error) {
-		mpt_prt(mpt, "unable to map fw area, error = %d", error);
-		goto free;
-	}
-
-	error = bus_dmamap_load(mpt->sc_dmat, mpt->fw_dmap, mpt->fw,
-	    mpt->fw_image_size, NULL, 0);
-	if (error) {
-		mpt_prt(mpt, "unable to load request DMA map, error = %d",
-		    error);
-		goto unmap;
-	}
-
-	return(error);
-
-unmap:
-	bus_dmamem_unmap(mpt->sc_dmat, (caddr_t)mpt->fw, mpt->fw_image_size);
-free:
-	bus_dmamem_free(mpt->sc_dmat, &mpt->fw_seg, 1);
-destroy:
-	bus_dmamap_destroy(mpt->sc_dmat, mpt->fw_dmap);
-
-	mpt->fw = NULL;
-	bzero(&mpt->fw_seg, sizeof(mpt->fw_seg));
-		
-	return (error);
-}
-
-void
-mpt_free_fw_mem(struct mpt_softc *mpt)
-{
-	bus_dmamap_unload(mpt->sc_dmat, mpt->fw_dmap);
-	bus_dmamem_unmap(mpt->sc_dmat, (caddr_t)mpt->fw, mpt->fw_image_size);
-	bus_dmamem_free(mpt->sc_dmat, &mpt->fw_seg, 1);
-	bus_dmamap_destroy(mpt->sc_dmat, mpt->fw_dmap);
-}
diff --git a/sys/dev/ic/mpt_openbsd.h b/sys/dev/ic/mpt_openbsd.h
deleted file mode 100644
index b032693c790..00000000000
--- a/sys/dev/ic/mpt_openbsd.h
+++ /dev/null
@@ -1,356 +0,0 @@
-/*	$OpenBSD: mpt_openbsd.h,v 1.20 2006/02/04 19:05:00 marco Exp $	*/
-/*	$NetBSD: mpt_netbsd.h,v 1.2 2003/04/16 23:02:14 thorpej Exp $	*/
-
-/*
- * Copyright (c) 2004 Milos Urbanek
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 2003 Wasabi Systems, Inc.
- * All rights reserved.
- *
- * Written by Jason R. Thorpe for Wasabi Systems, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed for the NetBSD Project by
- *	Wasabi Systems, Inc.
- * 4. The name of Wasabi Systems, Inc. may not be used to endorse
- *    or promote products derived from this software without specific prior
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 2000, 2001 by Greg Ansley, Adam Prewett
- *
- * Partially derived from Matt Jacobs ISP driver.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice immediately at the beginning of the file, without modification,
- *    this list of conditions, and the following disclaimer.
- * 2. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- */
-/*
- * Additional Copyright (c) 2002 by Matthew Jacob under same license.
- */
-
-/*
- * mpt_openbsd.h:
- *
- * OpenBSD-specific definitions for LSI Fusion adapters.
- *
- * Adapted from the NetBSD "mpt" driver by Milos Urbanek for
- * ZOOM International, s.r.o.
- */
-
-#ifndef _DEV_IC_MPT_OPENBSD_H_
-#define	_DEV_IC_MPT_OPENBSD_H_
-
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/malloc.h>
-#include <sys/device.h>
-#include <sys/ioctl.h>
-#include <sys/kernel.h>
-#include <sys/timeout.h>
-#include <sys/errno.h>
-#include <sys/buf.h>
-#include <sys/queue.h>
-
-#include <uvm/uvm_extern.h>
-
-#include <machine/bus.h>
-#include <machine/intr.h>
-
-#include <scsi/scsi_all.h>
-#include <scsi/scsiconf.h>
-
-#include <dev/ic/mpt_mpilib.h>
-
-/*
- * macro to convert from milliseconds to hz without integer overflow
- * Default version using only 32bits arithmetics.
- * 64bit port can define 64bit version in their <machine/param.h>
- * 0x20000 is safe for hz < 20000
- */
-#ifndef mstohz
-#define mstohz(ms) \
-	    (((ms +0u) / 1000u) * hz)
-#endif
-
-/* Max MPT Reply we are willing to accept (must be a power of 2). */
-#define	MPT_REPLY_SIZE		128
-
-#define	MPT_MAX_REQUESTS(mpt)	((mpt)->is_fc ? 1024 : 256)
-#define	MPT_REQUEST_AREA	512
-#define	MPT_SENSE_SIZE		32	/* included in MPT_REQUEST_AREA */
-#define	MPT_REQ_MEM_SIZE(mpt)	(MPT_MAX_REQUESTS(mpt) * MPT_REQUEST_AREA)
-
-/*
- * We cannot tell prior to getting IOC facts how big the IOC's request
- * area is. Because of this we cannot tell at compile time how many
- * simple SG elements we can fit within an IOC request prior to having
- * to put in a chain element.
- *
- * Experimentally we know that the Ultra4 parts have a 96 byte request
- * element size and the Fibre Channel units have a 144 byte request
- * element size. Therefore, if we have 512-32 (== 480) bytes of request
- * area to play with, we have room for between 3 and 5 request sized
- * regions- the first of which is the command  plus a simple SG list,
- * the rest of which are chained continuation SG lists. Given that the
- * normal request we use is 48 bytes w/o the first SG element, we can
- * assume we have 480-48 == 432 bytes to have simple SG elements and/or
- * chain elements. If we assume 32 bit addressing, this works out to
- * 54 SG or chain elements. If we assume 5 chain elements, then we have
- * a maximum of 49 seperate actual SG segments.
- */
-#define	MPT_SGL_MAX		49
-
-#define	MPT_RQSL(mpt)		((mpt)->request_frame_size << 2)
-#define	MPT_NSGL(mpt)		(MPT_RQSL(mpt) / sizeof(SGE_SIMPLE32))
-
-#define	MPT_NSGL_FIRST(mpt)					\
-	((((mpt)->request_frame_size << 2) -			\
-	  sizeof(MSG_SCSI_IO_REQUEST) -				\
-	  sizeof(SGE_IO_UNION)) / sizeof(SGE_SIMPLE32))
-
-/*
- * Convert a physical address returned from IOC to a virtual address
- * needed to access the data.
- */
-#define	MPT_REPLY_PTOV(m, x)					\
-	((void *)(&(m)->reply[(((x) << 1) - (m)->reply_phys)]))
-
-enum mpt_req_state {
-	REQ_FREE,
-	REQ_IN_PROGRESS,
-	REQ_TIMEOUT,
-	REQ_ON_CHIP,
-	REQ_DONE
-};
-
-struct req_entry {
-	uint16_t	index;		/* index of this entry */
-	struct scsi_xfer *xfer;		/* scsipi xfer request */
-	void		*req_vbuf;	/* virtual address of entry */
-	void		*sense_vbuf;	/* virtual address of sense data */
-	bus_addr_t	req_pbuf;	/* physical address of entry */
-	bus_addr_t	sense_pbuf;	/* physical address of sense data */
-	bus_dmamap_t	dmap;		/* DMA map for data buffer */
-	SLIST_ENTRY(req_entry) link;	/* pointer to next in list */
-	enum mpt_req_state debug;	/* debugging */
-	uint32_t	sequence;	/* sequence number */
-};
-
-struct mpt_softc {
-	struct device	mpt_dev;		/* base device glue */
-
-	int		is_fc;
-	int		bus;
-
-	/* IOC facts */
-	uint16_t	mpt_global_credits;
-	uint16_t	request_frame_size;
-	uint8_t		mpt_max_devices;
-	uint8_t		mpt_max_buses;
-	uint8_t         fw_download_boot;
-	uint32_t        fw_image_size;
-	uint32_t	im_support;
-
-	/* Port facts */
-	uint16_t	mpt_ini_id;
-
-	/* Device configuration information */
-	struct {
-		struct mpt_spi_cfg {
-			CONFIG_PAGE_SCSI_PORT_0	_port_page0;
-			CONFIG_PAGE_SCSI_PORT_1	_port_page1;
-			CONFIG_PAGE_SCSI_PORT_2	_port_page2;
-			CONFIG_PAGE_SCSI_DEVICE_0	_dev_page0[16];
-			CONFIG_PAGE_SCSI_DEVICE_1	_dev_page1[16];
-			uint16_t			_negotiated_speed[16];
-			uint16_t			_tag_enable;
-			uint16_t			_disc_enable;
-			uint16_t			_update_params0;
-			uint16_t			_update_params1;
-			uint16_t			_report_xfer_mode;
-		} spi;
-#define	mpt_port_page0		cfg.spi._port_page0
-#define	mpt_port_page1		cfg.spi._port_page1
-#define	mpt_port_page2		cfg.spi._port_page2
-#define	mpt_dev_page0		cfg.spi._dev_page0
-#define	mpt_dev_page1		cfg.spi._dev_page1
-#define	mpt_negotiated_speed	cfg.spi._negotiated_speed
-#define	mpt_tag_enable		cfg.spi._tag_enable
-#define	mpt_disc_enable		cfg.spi._disc_enable
-#define	mpt_update_params0	cfg.spi._update_params0
-#define	mpt_update_params1	cfg.spi._update_params1
-#define	mpt_report_xfer_mode	cfg.spi._report_xfer_mode
-
-		struct mpt_fc_cfg {
-			uint8_t		nada;
-		} fc;
-
-		struct mpt_mfg_cfg {
-			CONFIG_PAGE_MANUFACTURING_0 _mfg_page0;
-			CONFIG_PAGE_MANUFACTURING_1 _mfg_page1;
-			CONFIG_PAGE_MANUFACTURING_2 _mfg_page2;
-			CONFIG_PAGE_MANUFACTURING_3 _mfg_page3;
-			CONFIG_PAGE_MANUFACTURING_4 _mfg_page4;
-		} mfg;
-#define mpt_mfg_page0		cfg.mfg._mfg_page0
-#define mpt_mfg_page1		cfg.mfg._mfg_page1
-#define mpt_mfg_page2		cfg.mfg._mfg_page2
-#define mpt_mfg_page3		cfg.mfg._mfg_page3
-#define mpt_mfg_page4		cfg.mfg._mfg_page4
-
-		struct mpt_iou_cfg {
-			CONFIG_PAGE_IO_UNIT_0 _iou_page0;
-			CONFIG_PAGE_IO_UNIT_1 _iou_page1;
-			CONFIG_PAGE_IO_UNIT_2 _iou_page2;
-			CONFIG_PAGE_IO_UNIT_3 _iou_page3;
-		} iou;
-#define mpt_iou_page0		cfg.iou._iou_page0
-#define mpt_iou_page1		cfg.iou._iou_page1
-#define mpt_iou_page2		cfg.iou._iou_page2
-#define mpt_iou_page3		cfg.iou._iou_page3
-
-		struct mpt_ioc_cfg {
-			CONFIG_PAGE_IOC_0 _ioc_page0;
-			CONFIG_PAGE_IOC_1 _ioc_page1;
-			CONFIG_PAGE_IOC_2 _ioc_page2;
-			CONFIG_PAGE_IOC_3 _ioc_page3;
-			CONFIG_PAGE_IOC_4 _ioc_page4;
-		} ioc;
-#define mpt_ioc_page0		cfg.ioc._ioc_page0
-#define mpt_ioc_page1		cfg.ioc._ioc_page1
-#define mpt_ioc_page2		cfg.ioc._ioc_page2
-#define mpt_ioc_page3		cfg.ioc._ioc_page3
-#define mpt_ioc_page4		cfg.ioc._ioc_page4
-
-		struct mpt_raid_cfg {
-			CONFIG_PAGE_RAID_VOL_0 _raidvol_page0;
-			CONFIG_PAGE_RAID_PHYS_DISK_0 _raidphys_page0;
-		} raid;
-#define mpt_raidvol_page0		cfg.raid._raidvol_page0
-#define mpt_raidphys_page0		cfg.raid._raidphys_page0
-	} cfg;
-
-	bus_space_tag_t		sc_st;
-	bus_space_handle_t	sc_sh;
-	bus_dma_tag_t		sc_dmat;
-
-	/* Reply memory */
-	bus_dmamap_t		reply_dmap;
-	char			*reply;
-	bus_addr_t		reply_phys;
-
-	/* Request memory */
-	bus_dmamap_t		request_dmap;
-	char			*request;
-	bus_addr_t		request_phys;
-
-	/* scsi linkage */
-	struct req_entry		*request_pool;
-	SLIST_HEAD(req_queue, req_entry) request_free_list;
-
-	struct scsi_link	sc_link;
-	struct scsi_adapter	sc_adapter;
-
-	uint32_t		sequence;	/* sequence number */
-	uint32_t		timeouts;	/* timeout count */
-	uint32_t		success;	/* success after timeout */
-
-	uint8_t                 vmware;		/* If set, running in vmware */
-	uint8_t                 upload_fw;      /* If set, do a fw upload */
-	/* Firmware memory */
-	bus_dmamap_t            fw_dmap;
-	bus_dma_segment_t       fw_seg;
-	char                    *fw;
-
-	/* Companion part in a 929 or 1030, or NULL. */
-	struct mpt_softc	*mpt2;
-
-	/* To restore configuration after hard reset. */
-	void			(*sc_set_config_regs)(struct mpt_softc *);
-};
-
-#define	MPT_SYNC_REQ(mpt, req, ops)				\
-	bus_dmamap_sync((mpt)->sc_dmat, (mpt)->request_dmap,	\
-	    (req)->req_pbuf - (mpt)->request_phys,		\
-	    MPT_REQUEST_AREA, (ops))
-
-#define	mpt_read(mpt, reg)					\
-	bus_space_read_4((mpt)->sc_st, (mpt)->sc_sh, (reg))
-#define	mpt_write(mpt, reg, val)				\
-	bus_space_write_4((mpt)->sc_st, (mpt)->sc_sh, (reg), (val))
-
-void	mpt_attach(struct mpt_softc *);
-int	mpt_dma_mem_alloc(struct mpt_softc *);
-int	mpt_intr(void *);
-void	mpt_prt(struct mpt_softc *, const char *, ...);
-
-
-#define	mpt_set_config_regs(mpt)				\
-do {								\
-	if ((mpt)->sc_set_config_regs != NULL)			\
-		(*(mpt)->sc_set_config_regs)((mpt));		\
-} while (/*CONSTCOND*/0)
-
-#endif /* _DEV_IC_MPT_OPENBSD_H_ */
diff --git a/sys/dev/pci/files.pci b/sys/dev/pci/files.pci
index 53c10beb5bb..33ccc6a66a6 100644
--- a/sys/dev/pci/files.pci
+++ b/sys/dev/pci/files.pci
@@ -1,4 +1,4 @@
-#	$OpenBSD: files.pci,v 1.208 2006/06/26 04:57:54 brad Exp $
+#	$OpenBSD: files.pci,v 1.209 2006/06/29 22:14:41 dlg Exp $
 #	$NetBSD: files.pci,v 1.20 1996/09/24 17:47:15 christos Exp $
 #
 # Config file and device description for machine-independent PCI code.
@@ -188,10 +188,6 @@ file	dev/pci/ciss_pci.c		ciss_pci
 attach	isp at pci with isp_pci
 file	dev/pci/isp_pci.c		isp_pci
 
-# LSILogic Fusion-MPT I/O Processor SCSI/FC family
-attach	mpt at pci with mpt_pci
-file	dev/pci/mpt_pci.c		mpt_pci
-
 # LSI Logic Fusion-MPT Message Passing Interface
 attach	mpi at pci with mpi_pci
 file	dev/pci/mpi_pci.c		mpi_pci
diff --git a/sys/dev/pci/mpt_pci.c b/sys/dev/pci/mpt_pci.c
deleted file mode 100644
index 930815cdb49..00000000000
--- a/sys/dev/pci/mpt_pci.c
+++ /dev/null
@@ -1,331 +0,0 @@
-/*	$OpenBSD: mpt_pci.c,v 1.13 2006/05/31 03:38:32 dlg Exp $	*/
-/*	$NetBSD: mpt_pci.c,v 1.2 2003/07/14 15:47:26 lukem Exp $	*/
-
-/*
- * Copyright (c) 2004 Milos Urbanek
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 2003 Wasabi Systems, Inc.
- * All rights reserved.
- *
- * Written by Jason R. Thorpe for Wasabi Systems, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *	This product includes software developed for the NetBSD Project by
- *	Wasabi Systems, Inc.
- * 4. The name of Wasabi Systems, Inc. may not be used to endorse
- *    or promote products derived from this software without specific prior
- *    written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dev/ic/mpt.h>			/* pulls in all headers */
-
-#include <dev/pci/pcireg.h>
-#include <dev/pci/pcivar.h>
-#include <dev/pci/pcidevs.h>
-
-#define MPT_PCI_MMBA	(PCI_MAPREG_START+0x04)
-#define PCI_MAPREG_ROM	0x30
-
-void	mpt_pci_attach(struct device *, struct device *, void *);
-int	mpt_pci_match(struct device *, void *, void *);
-const struct mpt_pci_product *mpt_pci_lookup(const struct pci_attach_args *);
-
-struct mpt_pci_softc {
-	struct mpt_softc	sc_mpt;
-
-	pci_chipset_tag_t	sc_pc;
-	pcitag_t		sc_tag;
-
-	void			*sc_ih;
-
-	/* Saved volatile PCI configuration registers. */
-	pcireg_t		sc_pci_csr;
-	pcireg_t		sc_pci_bhlc;
-	pcireg_t		sc_pci_io_bar;
-	pcireg_t		sc_pci_mem0_bar[2];
-	pcireg_t		sc_pci_mem1_bar[2];
-	pcireg_t		sc_pci_rom_bar;
-	pcireg_t		sc_pci_int;
-	pcireg_t		sc_pci_pmcsr;
-};
-
-void	mpt_pci_link_peer(struct mpt_softc *);
-void	mpt_pci_read_config_regs(struct mpt_softc *);
-void	mpt_pci_set_config_regs(struct mpt_softc *);
-
-struct cfattach mpt_pci_ca = {
-	sizeof (struct mpt_pci_softc), mpt_pci_match, mpt_pci_attach,
-};
-
-#define PREAD(s, r)	pci_conf_read((s)->sc_pc, (s)->sc_tag, (r))
-#define PWRITE(s, r, v)	pci_conf_write((s)->sc_pc, (s)->sc_tag, (r), (v))
-
-#define MPP_F_FC	0x01	/* Fibre Channel adapter */
-#define MPP_F_DUAL	0x02	/* Dual port adapter */
-
-static const struct mpt_pci_product {
-	pci_vendor_id_t		mpp_vendor;
-	pci_product_id_t	mpp_product;
-	int			mpp_flags;
-} mpt_pci_products[] = {
-	{ PCI_VENDOR_SYMBIOS,	PCI_PRODUCT_SYMBIOS_1030,
-	  MPP_F_DUAL },
-	{ PCI_VENDOR_SYMBIOS,	PCI_PRODUCT_SYMBIOS_FC909,
-	  MPP_F_FC },
-	{ PCI_VENDOR_SYMBIOS,	PCI_PRODUCT_SYMBIOS_FC909A,
-	  MPP_F_FC },
-	{ PCI_VENDOR_SYMBIOS,	PCI_PRODUCT_SYMBIOS_FC929,
-	  MPP_F_FC | MPP_F_DUAL },
-	{ PCI_VENDOR_SYMBIOS,	PCI_PRODUCT_SYMBIOS_FC929_1,
-	  MPP_F_FC | MPP_F_DUAL },
-	{ PCI_VENDOR_SYMBIOS,	PCI_PRODUCT_SYMBIOS_FC919,
-	  MPP_F_FC },
-	{ PCI_VENDOR_SYMBIOS,	PCI_PRODUCT_SYMBIOS_FC919_1,
-	  MPP_F_FC },
-	{ 0,			0,
-	  0 }
-};
-
-const struct mpt_pci_product *
-mpt_pci_lookup(const struct pci_attach_args *pa)
-{
-	const struct mpt_pci_product	*mpp;
-
-	for (mpp = mpt_pci_products; mpp->mpp_vendor != 0; mpp++) {
-		if (PCI_VENDOR(pa->pa_id) == mpp->mpp_vendor &&
-		    PCI_PRODUCT(pa->pa_id) == mpp->mpp_product)
-			return (mpp);
-	}
-	return (NULL);
-}
-
-/* probe for mpt controller */
-int
-mpt_pci_match(struct device *parent, void *match, void *aux)
-{
-	struct pci_attach_args		*pa = aux;
-
-	if (mpt_pci_lookup(pa) != NULL)
-		return (2);
-
-	return (0);
-}
-
-void
-mpt_pci_attach(struct device *parent, struct device *self, void *aux)
-{
-	struct mpt_pci_softc		*psc = (void *)self;
-	struct mpt_softc		*mpt = &psc->sc_mpt;
-	struct pci_attach_args		*pa = aux;
-	const struct mpt_pci_product	*mpp;
-	pci_intr_handle_t		ih;
-	const char			*intrstr;
-	pcireg_t			memtype;
-
-	mpp = mpt_pci_lookup(pa);
-	if (mpp == NULL) {
-		printf(": mpt_pci_lookup failed\n");
-		return;
-	}
-
-	psc->sc_pc = pa->pa_pc;
-	psc->sc_tag = pa->pa_tag;
-
-	mpt->sc_dmat = pa->pa_dmat;
-	mpt->sc_set_config_regs = mpt_pci_set_config_regs;
-
-	/* Map the device. */
-	memtype = pci_mapreg_type(pa->pa_pc, pa->pa_tag, MPT_PCI_MMBA);
-	if (memtype != (PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT) &&
-	    memtype != (PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_64BIT)) {
-		printf(": incorrect memory map type\n");
-		return;
-	}
-
-	if (pci_mapreg_map(pa, MPT_PCI_MMBA, memtype, 0, &mpt->sc_st,
-	    &mpt->sc_sh, NULL, NULL, 0) != 0) {
-		printf(": unable to map device registers\n");
-		return;
-	}
-
-	/* Ensure that the ROM is disabled.  */
-	PWRITE(psc, PCI_MAPREG_ROM, PREAD(psc, PCI_MAPREG_ROM & ~1));
-
-	/* Map and establish our interrupt. */
-	if (pci_intr_map(pa, &ih) != 0) {
-		printf(": unable to map interrupt\n");
-		return;
-	}
-	intrstr = pci_intr_string(pa->pa_pc, ih);
-	psc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_BIO, mpt_intr, mpt,
-	    mpt->mpt_dev.dv_xname);
-	if (psc->sc_ih == NULL) {
-		printf(": unable to establish interrupt%s%s\n",
-		    intrstr != NULL ? " at " : "",
-		    intrstr != NULL ? intrstr : "");
-		return;
-	}
-
-	/* Disable interrupts on the part. */
-	mpt_disable_ints(mpt);
-
-	/* Allocate DMA memory. */
-	if (mpt_dma_mem_alloc(mpt) != 0) {
-		printf(": unable to allocate DMA memory\n");
-		return;
-	}
-
-	printf(": %s\n", intrstr ? intrstr : "?");
-
-	/*
-	 * Save the PCI config register values.
-	 *
-	 * Hard resets are known to screw up the BAR for diagnostic
-	 * memory accesses (Mem1).
-	 *
-	 * Using Mem1 is known to make the chip stop responding to
-	 * configuration cycles, so we need to save it now.
-	 */
-	mpt_pci_read_config_regs(mpt);
-
-	/*
-	 * If we're a dual-port adapter, try to find our peer.  We
-	 * need to fix its PCI config registers too.
-	 */
-	if (mpp->mpp_flags & MPP_F_DUAL)
-		mpt_pci_link_peer(mpt);
-
-	/* Initialize the hardware. */
-	if (mpt_init(mpt, MPT_DB_INIT_HOST) != 0) {
-		/* Error message already printed. */
-		return;
-	}
-
-	/* Complete attachment of hardware, include subdevices. */
-	mpt_attach(mpt);
-}
-
-/*
- * Find and remember our peer PCI function on a dual-port device.
- */
-void
-mpt_pci_link_peer(struct mpt_softc *mpt)
-{
-	extern struct cfdriver		mpt_cd;
-
-	struct mpt_pci_softc		*peer_psc, *psc = (void *)mpt;
-	struct device			*dev;
-	int				unit, b, d, f, peer_b, peer_d, peer_f;
-
-	pci_decompose_tag(psc->sc_pc, psc->sc_tag, &b, &d, &f);
-
-	for (unit = 0; unit < mpt_cd.cd_ndevs; unit++) {
-		if (unit == mpt->mpt_dev.dv_unit)
-			continue;
-		dev = device_lookup(&mpt_cd, unit);
-		if (dev == NULL)
-			continue;
-		if (dev->dv_cfdata == NULL)
-			continue;
-		if (dev->dv_cfdata->cf_attach != &mpt_pci_ca)
-			continue;
-		peer_psc = (void *)dev;
-		if (peer_psc->sc_pc != psc->sc_pc)
-			continue;
-		pci_decompose_tag(peer_psc->sc_pc, peer_psc->sc_tag,
-		    &peer_b, &peer_d, &peer_f);
-		if (peer_b == b && peer_d == d) {
-			DNPRINTF(10, "%s: linking with peer: %s",
-			    DEVNAME(mpt),
-			    peer_psc->sc_mpt.mpt_dev.dv_xname);
-			mpt->mpt2 = (struct mpt_softc *)peer_psc;
-			peer_psc->sc_mpt.mpt2 = mpt;
-			return;
-		}
-	}
-}
-
-/*
- * Save the volatile PCI configuration registers.
- */
-void
-mpt_pci_read_config_regs(struct mpt_softc *mpt)
-{
-	struct mpt_pci_softc		*psc = (void *)mpt;
-
-	psc->sc_pci_csr = PREAD(psc, PCI_COMMAND_STATUS_REG);
-	psc->sc_pci_bhlc = PREAD(psc, PCI_BHLC_REG);
-	psc->sc_pci_io_bar = PREAD(psc, PCI_MAPREG_START);
-	psc->sc_pci_mem0_bar[0] = PREAD(psc, PCI_MAPREG_START+0x04);
-	psc->sc_pci_mem0_bar[1] = PREAD(psc, PCI_MAPREG_START+0x08);
-	psc->sc_pci_mem1_bar[0] = PREAD(psc, PCI_MAPREG_START+0x0c);
-	psc->sc_pci_mem1_bar[1] = PREAD(psc, PCI_MAPREG_START+0x10);
-	psc->sc_pci_rom_bar = PREAD(psc, PCI_MAPREG_ROM);
-	psc->sc_pci_int = PREAD(psc, PCI_INTERRUPT_REG);
-	psc->sc_pci_pmcsr = PREAD(psc, 0x44);
-}
-
-/*
- * Restore the volatile PCI configuration registers.
- */
-void
-mpt_pci_set_config_regs(struct mpt_softc *mpt)
-{
-	struct mpt_pci_softc		*psc = (void *)mpt;
-
-	PWRITE(psc, PCI_COMMAND_STATUS_REG, psc->sc_pci_csr);
-	PWRITE(psc, PCI_BHLC_REG, psc->sc_pci_bhlc);
-	PWRITE(psc, PCI_MAPREG_START, psc->sc_pci_io_bar);
-	PWRITE(psc, PCI_MAPREG_START+0x04, psc->sc_pci_mem0_bar[0]);
-	PWRITE(psc, PCI_MAPREG_START+0x08, psc->sc_pci_mem0_bar[1]);
-	PWRITE(psc, PCI_MAPREG_START+0x0c, psc->sc_pci_mem1_bar[0]);
-	PWRITE(psc, PCI_MAPREG_START+0x10, psc->sc_pci_mem1_bar[1]);
-	PWRITE(psc, PCI_MAPREG_ROM, psc->sc_pci_rom_bar);
-	PWRITE(psc, PCI_INTERRUPT_REG, psc->sc_pci_int);
-	PWRITE(psc, 0x44, psc->sc_pci_pmcsr);
-}