diff options
author | Dale Rahn <drahn@cvs.openbsd.org> | 2006-09-15 23:39:25 +0000 |
---|---|---|
committer | Dale Rahn <drahn@cvs.openbsd.org> | 2006-09-15 23:39:25 +0000 |
commit | 826ef0b23247857e7d702d7bc8a9814044ecf427 (patch) | |
tree | 5899fc597a3c55781b105912fa58e068e4837dbe /sys/dev | |
parent | e5c68bdac0809127699b3f3f74f6931c4013d464 (diff) |
Kettenis's polished version of diff to preserve the mac address on thecus,
if the hardware mac is a specific number (hardware doesn't provide
unique mac addresses except in redboot fconfig data). yes deraadt@
Diffstat (limited to 'sys/dev')
-rw-r--r-- | sys/dev/ic/re.c | 34 |
1 files changed, 33 insertions, 1 deletions
diff --git a/sys/dev/ic/re.c b/sys/dev/ic/re.c index aa8dd20fdfe..6d5a7a477d0 100644 --- a/sys/dev/ic/re.c +++ b/sys/dev/ic/re.c @@ -1,4 +1,4 @@ -/* $OpenBSD: re.c,v 1.43 2006/08/17 23:08:07 brad Exp $ */ +/* $OpenBSD: re.c,v 1.44 2006/09/15 23:39:24 drahn Exp $ */ /* $FreeBSD: if_re.c,v 1.31 2004/09/04 07:54:05 ru Exp $ */ /* * Copyright (c) 1997, 1998-2003 @@ -742,6 +742,18 @@ done: #endif +#ifdef __armish__ +/* + * Thecus N2100 doesn't store the full mac address in eeprom + * so we read the old mac address from the device before the reset + * in hopes that the proper mac address is already there. + */ +union { + u_int32_t eaddr_word[2]; + u_char eaddr[ETHER_ADDR_LEN]; +} boot_eaddr; +int boot_eaddr_valid; +#endif /* __armish__ */ /* * Attach the interface. Allocate softc structures, do ifmedia * setup and ethernet/BPF attach. @@ -770,6 +782,26 @@ re_attach(struct rl_softc *sc) for (i = 0; i < ETHER_ADDR_LEN / 2; i++) as[i] = letoh16(as[i]); bcopy(as, eaddr, sizeof(eaddr)); +#ifdef __armish__ + /* + * On the Thecus N2100, the MAC address in the EEPROM is + * always 00:14:fd:10:00:00. The proper MAC address is stored + * in flash. Fortunately RedBoot configures the proper MAC + * address (for the first onboard interface) which we can read + * from the IDR. + */ + if (eaddr[0] == 0x00 && eaddr[1] == 0x14 && eaddr[2] == 0xfd && + eaddr[3] == 0x10 && eaddr[4] == 0x00 && eaddr[5] == 0x00) { + if (boot_eaddr_valid == 0) { + boot_eaddr.eaddr_word[1] = letoh32(CSR_READ_4(sc, RL_IDR4)); + boot_eaddr.eaddr_word[0] = letoh32(CSR_READ_4(sc, RL_IDR0)); + boot_eaddr_valid = 1; + } + + bcopy(boot_eaddr.eaddr, eaddr, sizeof(eaddr)); + eaddr[5] += sc->sc_dev.dv_unit; + } +#endif /* * Set RX length mask, TX poll request register |