diff options
author | Jun-ichiro itojun Hagino <itojun@cvs.openbsd.org> | 2000-06-18 17:32:49 +0000 |
---|---|---|
committer | Jun-ichiro itojun Hagino <itojun@cvs.openbsd.org> | 2000-06-18 17:32:49 +0000 |
commit | 3e0485a346912994c93f111e1e01dbe37013880a (patch) | |
tree | 94078ad3aef8c72847caaed104975a61e385baa1 /sys/netinet6 | |
parent | 6f3edb3da4672239356c7ac3fbc3355585785290 (diff) |
sync with KAME udp6_output(). udp output logic is very different between
IPv4/v6 so the separation should make more sense.
TODO: remove IPv6 case from udp_output()
TODO: remove/comment out/#if 0 IPv4 mapped address cases
Diffstat (limited to 'sys/netinet6')
-rw-r--r-- | sys/netinet6/in6_proto.c | 4 | ||||
-rw-r--r-- | sys/netinet6/udp6_output.c | 295 |
2 files changed, 297 insertions, 2 deletions
diff --git a/sys/netinet6/in6_proto.c b/sys/netinet6/in6_proto.c index d771bd67761..65424304f3d 100644 --- a/sys/netinet6/in6_proto.c +++ b/sys/netinet6/in6_proto.c @@ -1,4 +1,4 @@ -/* $OpenBSD: in6_proto.c,v 1.21 2000/05/25 01:22:00 itojun Exp $ */ +/* $OpenBSD: in6_proto.c,v 1.22 2000/06/18 17:32:48 itojun Exp $ */ /* * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. @@ -125,7 +125,7 @@ struct ip6protosw inet6sw[] = { }, { SOCK_DGRAM, &inet6domain, IPPROTO_UDP, PR_ATOMIC | PR_ADDR, udp6_input, 0, udp6_ctlinput, ip6_ctloutput, - udp6_usrreq, 0, + udp6_usrreq, 0, 0, 0, 0, udp_sysctl, }, diff --git a/sys/netinet6/udp6_output.c b/sys/netinet6/udp6_output.c new file mode 100644 index 00000000000..1a2b5e5d853 --- /dev/null +++ b/sys/netinet6/udp6_output.c @@ -0,0 +1,295 @@ +/* $KAME: udp6_output.c,v 1.14 2000/06/13 10:31:23 itojun Exp $ */ + +/* + * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of the project nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + */ + +/* + * Copyright (c) 1982, 1986, 1989, 1993 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)udp_var.h 8.1 (Berkeley) 6/10/93 + */ + +#include <sys/param.h> +#include <sys/malloc.h> +#include <sys/mbuf.h> +#include <sys/protosw.h> +#include <sys/socket.h> +#include <sys/socketvar.h> +#include <sys/errno.h> +#include <sys/stat.h> +#include <sys/systm.h> +#include <sys/syslog.h> + +#include <net/if.h> +#include <net/route.h> +#include <net/if_types.h> + +#include <netinet/in.h> +#include <netinet/in_var.h> +#include <netinet/in_systm.h> +#include <netinet/ip.h> +#include <netinet/ip_var.h> +#include <netinet/in_pcb.h> +#include <netinet/udp.h> +#include <netinet/udp_var.h> +#include <netinet/ip6.h> +#include <netinet6/ip6_var.h> +#include <netinet/icmp6.h> +#include <netinet6/ip6protosw.h> + +#undef IPSEC + +#include "faith.h" + +#include <net/net_osdep.h> + +/* + * UDP protocol inplementation. + * Per RFC 768, August, 1980. + */ + +#define in6pcb inpcb +#define in6p_outputopts inp_outputopts6 +#define in6p_socket inp_socket +#define in6p_faddr inp_faddr6 +#define in6p_laddr inp_laddr6 +#define in6p_fport inp_fport +#define in6p_lport inp_lport +#define in6p_flags inp_flags +#define in6p_moptions inp_moptions6 +#define in6p_route inp_route6 +#define in6p_flowinfo inp_fflowinfo +#define udp6stat udpstat +#define udp6s_opackets udps_opackets + +int +udp6_output(in6p, m, addr6, control) + register struct in6pcb *in6p; + register struct mbuf *m; + struct mbuf *addr6, *control; +{ + register u_int32_t ulen = m->m_pkthdr.len; + u_int32_t plen = sizeof(struct udphdr) + ulen; + struct ip6_hdr *ip6; + struct udphdr *udp6; + struct in6_addr *laddr, *faddr; + u_short fport; + int error = 0; + struct ip6_pktopts opt, *stickyopt; + int priv; + int af, hlen; + int flags; + struct sockaddr_in6 tmp; + + priv = 0; + if ((in6p->in6p_socket->so_state & SS_PRIV) != 0) + priv = 1; + stickyopt = in6p->in6p_outputopts; + if (control) { + if ((error = ip6_setpktoptions(control, &opt, priv)) != 0) + goto release; + in6p->in6p_outputopts = &opt; + } + + if (addr6) { + /* + * IPv4 version of udp_output calls in_pcbconnect in this case, + * which needs splnet and affects performance. + * Since we saw no essential reason for calling in_pcbconnect, + * we get rid of such kind of logic, and call in6_selectsrc + * and in6_pcbsetport in order to fill in the local address + * and the local port. + */ + struct sockaddr_in6 *sin6 = mtod(addr6, struct sockaddr_in6 *); + + if (addr6->m_len != sizeof(*sin6)) { + error = EINVAL; + goto release; + } + if (sin6->sin6_family != AF_INET6) { + error = EAFNOSUPPORT; + goto release; + } + if (sin6->sin6_port == 0) { + error = EADDRNOTAVAIL; + goto release; + } + + if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) { + error = EISCONN; + goto release; + } + + /* protect *sin6 from overwrites */ + tmp = *sin6; + sin6 = &tmp; + + faddr = &sin6->sin6_addr; + fport = sin6->sin6_port; /* allow 0 port */ + + /* KAME hack: embed scopeid */ + if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) { + error = EINVAL; + goto release; + } + + if (1) { /* we don't support IPv4 mapped address */ + laddr = in6_selectsrc(sin6, in6p->in6p_outputopts, + in6p->in6p_moptions, + &in6p->in6p_route, + &in6p->in6p_laddr, &error); + } else + laddr = &in6p->in6p_laddr; /*XXX*/ + if (laddr == NULL) { + if (error == 0) + error = EADDRNOTAVAIL; + goto release; + } + if (in6p->in6p_lport == 0 && + (error = in6_pcbsetport(laddr, in6p)) != 0) + goto release; + } else { + if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) { + error = ENOTCONN; + goto release; + } + laddr = &in6p->in6p_laddr; + faddr = &in6p->in6p_faddr; + fport = in6p->in6p_fport; + } + + if (1) { /* we don't support IPv4 mapped address */ + af = AF_INET6; + hlen = sizeof(struct ip6_hdr); + } else { + af = AF_INET; + hlen = sizeof(struct ip); + } + + /* + * Calculate data length and get a mbuf + * for UDP and IP6 headers. + */ + M_PREPEND(m, hlen + sizeof(struct udphdr), M_DONTWAIT); + if (m == 0) { + error = ENOBUFS; + goto release; + } + + /* + * Stuff checksum and output datagram. + */ + udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen); + udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */ + udp6->uh_dport = fport; + if (plen <= 0xffff) + udp6->uh_ulen = htons((u_short)plen); + else + udp6->uh_ulen = 0; + udp6->uh_sum = 0; + + switch (af) { + case AF_INET6: + ip6 = mtod(m, struct ip6_hdr *); + ip6->ip6_flow = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK; + ip6->ip6_vfc &= ~IPV6_VERSION_MASK; + ip6->ip6_vfc |= IPV6_VERSION; +#if 0 /* ip6_plen will be filled in ip6_output. */ + ip6->ip6_plen = htons((u_short)plen); +#endif + ip6->ip6_nxt = IPPROTO_UDP; + ip6->ip6_hlim = in6_selecthlim(in6p, + in6p->in6p_route.ro_rt ? + in6p->in6p_route.ro_rt->rt_ifp : NULL); + ip6->ip6_src = *laddr; + ip6->ip6_dst = *faddr; + + if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP, + sizeof(struct ip6_hdr), plen)) == 0) { + udp6->uh_sum = 0xffff; + } + + flags = 0; +#ifdef IPV6_MINMTU + if (in6p->in6p_flags & IN6P_MINMTU) + flags |= IPV6_MINMTU; +#endif + + udp6stat.udp6s_opackets++; +#ifdef IPSEC + ipsec_setsocket(m, in6p->in6p_socket); +#endif /*IPSEC*/ + error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route, + flags, in6p->in6p_moptions, NULL); + break; + case AF_INET: + error = EAFNOSUPPORT; + goto release; + } + goto releaseopt; + +release: + m_freem(m); + +releaseopt: + if (control) { + in6p->in6p_outputopts = stickyopt; + m_freem(control); + } + return(error); +} |