partial sync with netbsd 960418, more to come

1 files changed, 359 insertions, 53 deletions

diff --git a/sys/scsi/scsi_changer.h b/sys/scsi/scsi_changer.h
index 5161ce8e166..ef7c6146313 100644
--- a/sys/scsi/scsi_changer.h
+++ b/sys/scsi/scsi_changer.h
@@ -1,11 +1,48 @@
-/*	$NetBSD: scsi_changer.h,v 1.5 1994/12/28 19:42:59 mycroft Exp $	*/
+/*	$NetBSD: scsi_changer.h,v 1.7 1996/04/03 00:25:48 thorpej Exp $	*/
+
+/*
+ * Copyright (c) 1996 Jason R. Thorpe <thorpej@and.com>
+ * All rights reserved.
+ *
+ * Partially based on an autochanger driver written by Stefan Grefen
+ * and on an autochanger driver written by the Systems Programming Group
+ * at the University of Utah Computer Science Department.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgements:
+ *	This product includes software developed by Jason R. Thorpe
+ *	for And Communications, http://www.and.com/
+ * 4. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
 
 /*
  * SCSI changer interface description
  */
 
 /*
- * Written by Stefan Grefen   (grefen@goofy.zdv.uni-mainz.de soon grefen@convex.com)
+ * Partially derived from software written by Stefan Grefen
+ * (grefen@goofy.zdv.uni-mainz.de soon grefen@convex.com)
  * based on the SCSI System by written Julian Elischer (julian@tfs.com)
  * for TRW Financial Systems.
  *
@@ -21,74 +58,343 @@
  *
  * Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992
  */
+
 #ifndef _SCSI_SCSI_CHANGER_H
 #define _SCSI_SCSI_CHANGER_H 1
 
 /*
  * SCSI command format
  */
-struct scsi_read_element_status {
-        u_char  opcode;
-	u_char	byte2;
-#define	SRES_ELEM_TYPE_CODE 	0x0F
-#define	SRES_ELEM_VOLTAG 	0x10
-	u_char	starting_element_addr[2];
-	u_char	number_of_elements[2];
-	u_char	resv1;
-	u_char	allocation_length[3];
-	u_char	resv2;
-	u_char	control;
+
+/*
+ * Exchange the medium in the source element with the medium
+ * located at the destination element.
+ */
+struct scsi_exchange_medium {
+	u_int8_t	opcode;
+#define EXCHANGE_MEDIUM		0xa6
+	u_int8_t	byte2;
+	u_int8_t	tea[2];	/* transport element address */
+	u_int8_t	src[2];	/* source address */
+	u_int8_t	fdst[2]; /* first destination address */
+	u_int8_t	sdst[2]; /* second destination address */
+	u_int8_t	flags;
+#define EXCHANGE_MEDIUM_INV1	0x01
+#define EXCHANGE_MEDIUM_INV2	0x02
+	u_int8_t	control;
 };
-#define RE_ALL_ELEMENTS			0
-#define RE_MEDIUM_TRANSPORT_ELEMENT	1
-#define RE_STORAGE_ELEMENT		2
-#define RE_IMPORT_EXPORT		3
-#define RE_DATA_TRANSFER_ELEMENT	4
 
+/*
+ * Cause the medium changer to check all elements for medium and any
+ * other status relevant to the element.
+ */
+struct scsi_initialize_elememt_status {
+	u_int8_t	opcode;
+#define INITIALIZE_ELEMENT_STATUS	0x07
+	u_int8_t	byte2;
+	u_int8_t	reserved[3];
+	u_int8_t	control;
+};
+
+/*
+ * Request the changer to move a unit of media from the source element
+ * to the destination element.
+ */
 struct scsi_move_medium {
-	u_char  opcode;
-	u_char	byte2;
-	u_char  transport_element_address[2];
-	u_char  source_address[2];
-	u_char  destination_address[2];
-	u_char  rsvd[2];
-	u_char  invert;
-	u_char	control;
+	u_int8_t	opcode;
+#define MOVE_MEDIUM	0xa5
+	u_int8_t	byte2;
+	u_int8_t	tea[2];	/* transport element address */
+	u_int8_t	src[2];	/* source element address */
+	u_int8_t	dst[2];	/* destination element address */
+	u_int8_t	reserved[2];
+	u_int8_t	flags;
+#define MOVE_MEDIUM_INVERT	0x01
+	u_int8_t	control;
 };
 
+/*
+ * Position the specified transport element (picker) in front of
+ * the destination element specified.
+ */
 struct scsi_position_to_element {
-	u_char  opcode;
-        u_char  byte2;
-	u_char  transport_element_address[2];
-	u_char  source_address[2];
-	u_char  rsvd[2];
-	u_char  invert;
-	u_char	control;
+	u_int8_t	opcode;
+#define POSITION_TO_ELEMENT	0x2b
+	u_int8_t	byte2;
+	u_int8_t	tea[2];	/* transport element address */
+	u_int8_t	dst[2];	/* destination element address */
+	u_int8_t	reserved[2];
+	u_int8_t	flags;
+#define POSITION_TO_ELEMENT_INVERT	0x01
+	u_int8_t	control;
+};
+
+/*
+ * Request that the changer report the status of its internal elements.
+ */
+struct scsi_read_element_status {
+	u_int8_t	opcode;
+#define READ_ELEMENT_STATUS	0xb8
+	u_int8_t	byte2;
+#define READ_ELEMENT_STATUS_VOLTAG	0x10	/* report volume tag info */
+	/* ...next 4 bits are an element type code... */
+	u_int8_t	sea[2];	/* starting element address */
+	u_int8_t	count[2]; /* number of elements */
+	u_int8_t	reserved0;
+	u_int8_t	len[3];	/* length of data buffer */
+	u_int8_t	reserved1;
+	u_int8_t	control;
 };
-	
+
+struct scsi_request_volume_element_address {
+	u_int8_t	opcode;
+#define REQUEST_VOLUME_ELEMENT_ADDRESS	0xb5
+	u_int8_t	byte2;
+#define REQUEST_VOLUME_ELEMENT_ADDRESS_VOLTAG	0x10
+	/* ...next 4 bits are an element type code... */
+	u_int8_t	eaddr[2];	/* element address */
+	u_int8_t	count[2];	/* number of elements */
+	u_int8_t	reserved0;
+	u_int8_t	len[3];		/* length of data buffer */
+	u_int8_t	reserved1;
+	u_int8_t	control;
+};
+
+/* XXX scsi_release */
+
 /*
- * Opcodes
+ * Data returned by READ ELEMENT STATUS consists of an 8-byte header
+ * followed by one or more read_element_status_pages.
  */
-#define POSITION_TO_ELEMENT     0x2b
-#define MOVE_MEDIUM             0xa5
-#define READ_ELEMENT_STATUS     0xb8
-
-struct scsi_element_status_data {
-	u_char	first_element_reported[2];
-	u_char	number_of_elements_reported[2];
-	u_char  rsvd;
-	u_char	byte_count_of_report[3];
+struct read_element_status_header {
+	u_int8_t	fear[2];  /* first element address reported */
+	u_int8_t	count[2]; /* number of elements available */
+	u_int8_t	reserved;
+	u_int8_t	nbytes[3]; /* byte count of all pages */
 };
 
-struct element_status_page {
-	u_char	element_type_code;
-	u_char	flags;
-#define	ESP_AVOLTAG	0x40
-#define	ESP_PVOLTAG	0x80
-	u_char element_descriptor_length[2];
-	u_char rsvd;
-	u_char byte_count_of_descriptor_data[3];
+struct read_element_status_page_header {
+	u_int8_t	type;	/* element type code; see type codes below */
+	u_int8_t	flags;
+#define READ_ELEMENT_STATUS_AVOLTAG	0x40
+#define READ_ELEMENT_STATUS_PVOLTAG	0x80
+	u_int8_t	edl[2];	/* element descriptor length */
+	u_int8_t	reserved;
+	u_int8_t	nbytes[3]; /* byte count of all descriptors */
 };
 
-#endif /* _SCSI_SCSI_CHANGER_H */
+struct read_element_status_descriptor {
+	u_int8_t	eaddr[2];	/* element address */
+	u_int8_t	flags1;
+
+#define READ_ELEMENT_STATUS_FULL	0x01
+#define READ_ELEMENT_STATUS_IMPEXP	0x02
+#define READ_ELEMENT_STATUS_EXCEPT	0x04
+#define READ_ELEMENT_STATUS_ACCESS	0x08
+#define READ_ELEMENT_STATUS_EXENAB	0x10
+#define READ_ELEMENT_STATUS_INENAB	0x20
+
+#define READ_ELEMENT_STATUS_MT_MASK1	0x05
+#define READ_ELEMENT_STATUS_ST_MASK1	0x0c
+#define READ_ELEMENT_STATUS_IE_MASK1	0x3f
+#define READ_ELEMENT_STATUS_DT_MASK1	0x0c
+
+	u_int8_t	reserved0;
+	u_int8_t	sense_code;
+	u_int8_t	sense_qual;
 
+	/*
+	 * dt_scsi_flags and dt_scsi_addr are valid only on data transport
+	 * elements.  These bytes are undefined for all other element types.
+	 */
+	u_int8_t	dt_scsi_flags;
+
+#define READ_ELEMENT_STATUS_DT_LUNMASK	0x07
+#define READ_ELEMENT_STATUS_DT_LUVALID	0x10
+#define READ_ELEMENT_STATUS_DT_IDVALID	0x20
+#define READ_ELEMENT_STATUS_DT_NOTBUS	0x80
+
+	u_int8_t	dt_scsi_addr;
+
+	u_int8_t	reserved1;
+
+	u_int8_t	flags2;
+#define READ_ELEMENT_STATUS_INVERT	0x40
+#define READ_ELEMENT_STATUS_SVALID	0x80
+	u_int8_t	ssea[2];	/* source storage element address */
+
+	/*
+	 * bytes 12-47:	Primary volume tag information.
+	 *		(field omitted if PVOLTAG = 0)
+	 *
+	 * bytes 48-83:	Alternate volume tag information.
+	 *		(field omitted if AVOLTAG = 0)
+	 *
+	 * bytes 84-87:	Reserved (moved up if either of the above fields
+	 *		are omitted)
+	 *
+	 * bytes 88-end: Vendor-specific: (moved up if either of the
+	 *		 above fields are missing)
+	 */
+};
+
+/* XXX add data returned by REQUEST VOLUME ELEMENT ADDRESS */
+
+/* Element type codes */
+#define ELEMENT_TYPE_MASK	0x0f	/* Note: these aren't bits */
+#define ELEMENT_TYPE_ALL	0x00
+#define ELEMENT_TYPE_MT		0x01
+#define ELEMENT_TYPE_ST		0x02
+#define ELEMENT_TYPE_IE		0x03
+#define ELEMENT_TYPE_DT		0x04
+
+/*
+ * XXX The following definitions should be common to all SCSI device types.
+ */
+#define PGCODE_MASK	0x3f	/* valid page number bits in pg_code */
+#define PGCODE_PS	0x80	/* indicates page is savable */
+
+/*
+ * Device capabilities page.
+ *
+ * This page defines characteristics of the elemenet types in the
+ * medium changer device.
+ *
+ * Note in the definitions below, the following abbreviations are
+ * used:
+ *		MT	Medium transport element (picker)
+ *		ST	Storage transport element (slot)
+ *		IE	Import/export element (portal)
+ *		DT	Data tranfer element (tape/disk drive)
+ */
+struct page_device_capabilities {
+	u_int8_t	pg_code;	/* page code (0x1f) */
+	u_int8_t	pg_length;	/* page length (0x12) */
+
+	/*
+	 * The STOR_xx bits indicate that an element of a given
+	 * type may provide independent storage for a unit of
+	 * media.  The top four bits of this value are reserved.
+	 */
+	u_int8_t	stor;
+#define STOR_MT		0x01
+#define STOR_ST		0x02
+#define STOR_IE		0x04
+#define STOR_DT		0x08
+
+	u_int8_t	reserved0;
+
+	/*
+	 * The MOVE_TO_yy bits indicate the changer supports
+	 * moving a unit of medium from an element of a given type to an
+	 * element of type yy.  This is used to determine if a given
+	 * MOVE MEDIUM command is legal.  The top four bits of each
+	 * of these values are reserved.
+	 */
+	u_int8_t	move_from_mt;
+	u_int8_t	move_from_st;
+	u_int8_t	move_from_ie;
+	u_int8_t	move_from_dt;
+#define MOVE_TO_MT	0x01
+#define MOVE_TO_ST	0x02
+#define MOVE_TO_IE	0x04
+#define MOVE_TO_DT	0x08
+
+	u_int8_t	reserved1[2];
+
+	/*
+	 * Similar to above, but for EXCHANGE MEDIUM.
+	 */
+	u_int8_t	exchange_with_mt;
+	u_int8_t	exchange_with_st;
+	u_int8_t	exchange_with_ie;
+	u_int8_t	exchange_with_dt;
+#define EXCHANGE_WITH_MT	0x01
+#define EXCHANGE_WITH_ST	0x02
+#define EXCHANGE_WITH_IE	0x04
+#define EXCHANGE_WITH_DT	0x08
+};
+
+/*
+ * Medium changer elemement address assignment page.
+ *
+ * Some of these fields can be a little confusing, so an explanation
+ * is in order.
+ *
+ * Each component within a a medium changer apparatus is called an
+ * "element".
+ *
+ * The "medium transport element address" is the address of the first
+ * picker (robotic arm).  "Number of medium transport elements" tells
+ * us how many pickers exist in the changer.
+ *
+ * The "first storage element address" is the address of the first
+ * slot in the tape or disk magazine.  "Number of storage elements" tells
+ * us how many slots exist in the changer.
+ *
+ * The "first import/export element address" is the address of the first
+ * medium portal accessible both by the medium changer and an outside
+ * human operator.  This is where the changer might deposit tapes destined
+ * for some vault.  The "number of import/export elements" tells us
+ * not many of these portals exist in the changer.  NOTE: this number may
+ * be 0.
+ *
+ * The "first data transfer element address" is the address of the first
+ * tape or disk drive in the changer.  "Number of data transfer elements"
+ * tells us how many drives exist in the changer.
+ */
+struct page_element_address_assignment {
+	u_int8_t	pg_code;	/* page code (0x1d) */
+	u_int8_t	pg_length;	/* page length (0x12) */
+
+	/* Medium transport element address */
+	u_int8_t	mtea[2];
+
+	/* Number of medium transport elements */
+	u_int8_t	nmte[2];
+
+	/* First storage element address */
+	u_int8_t	fsea[2];
+
+	/* Number of storage elements */
+	u_int8_t	nse[2];
+
+	/* First import/export element address */
+	u_int8_t	fieea[2];
+
+	/* Number of import/export elements */
+	u_int8_t	niee[2];
+
+	/* First data transfer element address */
+	u_int8_t	fdtea[2];
+
+	/* Number of data trafer elements */
+	u_int8_t	ndte[2];
+
+	u_int8_t	reserved[2];
+};
+
+/*
+ * Transport geometry parameters page.
+ *
+ * Defines whether each medium transport element is a member of a set of
+ * elements that share a common robotics subsystem and whether the element
+ * is capable of media rotation.  One transport geometry descriptor is
+ * transferred for each medium transport element, beginning with the first
+ * medium transport element (other than the default transport element address
+ * of 0).
+ */
+struct page_transport_geometry_parameters {
+	u_int8_t	pg_code;	/* page code (0x1e) */
+	u_int8_t	pg_length;	/* page length; variable */
+
+	/* Transport geometry descriptor(s) are here. */
+
+	u_int8_t	misc;
+#define CAN_ROTATE	0x01
+
+	/* Member number in transport element set. */
+	u_int8_t	member;
+};
+
+#endif /* _SCSI_SCSI_CHANGER_H */