new timeouts

2 files changed, 40 insertions, 32 deletions

diff --git a/sys/dev/ic/com.c b/sys/dev/ic/com.c
index 5e11caa6bca..007568dd1e5 100644
--- a/sys/dev/ic/com.c
+++ b/sys/dev/ic/com.c
@@ -1,4 +1,4 @@
-/*	$OpenBSD: com.c,v 1.57 2001/01/24 09:38:04 hugh Exp $	*/
+/*	$OpenBSD: com.c,v 1.58 2001/03/13 02:53:51 mickey Exp $	*/
 /*	$NetBSD: com.c,v 1.82.4.1 1996/06/02 09:08:00 mrg Exp $	*/
 
 /*
@@ -222,7 +222,7 @@ comspeed(speed)
 		return -1;
 	return x;
 
-#undef	divrnd(n, q)
+#undef	divrnd
 }
 
 int
@@ -242,7 +242,7 @@ comprobe1(iot, ioh)
 	    } else
 		break;
 	}
-	if (i >= 32) 
+	if (i >= 32)
 	    return 0;
 
 	return 1;
@@ -284,7 +284,7 @@ comprobeHAYESP(hayespioh, sc)
 
 	printf(": ESP");
 
- 	/* Check ESP Self Test bits. */
+	/* Check ESP Self Test bits. */
 	/* Check for ESP version 2.0: bits 4,5,6 == 010 */
 	bus_space_write_1(iot, hayespioh, HAYESP_CMD1, HAYESP_GETTEST);
 	val = bus_space_read_1(iot, hayespioh, HAYESP_STATUS1); /* Clear reg 1 */
@@ -345,7 +345,7 @@ comprobe(parent, match, aux)
 	if (1) {
 		struct cfdata *cf = match;
 		struct commulti_attach_args *ca = aux;
- 
+
 		if (cf->cf_loc[0] != -1 && cf->cf_loc[0] != ca->ca_slave)
 			return (0);
 
@@ -471,7 +471,7 @@ comattach(parent, self, aux)
 	if (iobase == comconsaddr) {
 		comconsattached = 1;
 
-		/* 
+		/*
 		 * Need to reset baud rate, etc. of next print so reset
 		 * comconsinit.  Also make sure console is always "hardwired".
 		 */
@@ -673,7 +673,11 @@ comattach(parent, self, aux)
 			cn_tab->cn_dev = makedev(maj, sc->sc_dev.dv_unit);
 
 		printf("%s: console\n", sc->sc_dev.dv_xname);
-	} 
+	}
+
+	timeout_set(&sc->sc_poll_tmo, compoll, sc);
+	timeout_set(&sc->sc_diag_tmo, comdiag, sc);
+	timeout_set(&sc->sc_dtr_tmo, com_raisedtr, sc);
 
 	/*
 	 * If there are no enable/disable functions, assume the device
@@ -696,7 +700,7 @@ com_enable_debugport(sc)
 	bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_ier, sc->sc_ier);
 	SET(sc->sc_mcr, MCR_DTR | MCR_RTS | MCR_IENABLE);
 	bus_space_write_1(sc->sc_iot, sc->sc_ioh, com_mcr, sc->sc_mcr);
-	
+
 	splx(s);
 }
 #endif /* KGDB */
@@ -728,9 +732,9 @@ com_detach(self, flags)
 		ttyfree(sc->sc_tty);
 	}
 
-	untimeout(compoll, NULL);
-	untimeout(com_raisedtr, sc);
-	untimeout(comdiag, sc);
+	timeout_del(&sc->sc_poll_tmo);
+	timeout_del(&sc->sc_dtr_tmo);
+	timeout_del(&sc->sc_diag_tmo);
 
 	return (0);
 }
@@ -782,7 +786,7 @@ comopen(dev, flag, mode, p)
 	struct tty *tp;
 	int s;
 	int error = 0;
- 
+
 	if (unit >= com_cd.cd_ndevs)
 		return ENXIO;
 	sc = com_cd.cd_devs[unit];
@@ -833,7 +837,7 @@ comopen(dev, flag, mode, p)
 		ttsetwater(tp);
 
 		if (comsopen++ == 0)
-			timeout(compoll, NULL, 1);
+			timeout_add(&sc->sc_poll_tmo, 1);
 
 		sc->sc_ibufp = sc->sc_ibuf = sc->sc_ibufs[0];
 		sc->sc_ibufhigh = sc->sc_ibuf + COM_IHIGHWATER;
@@ -870,7 +874,7 @@ comopen(dev, flag, mode, p)
 
 			/* Set 16550 compatibility mode */
 			bus_space_write_1(iot, hayespioh, HAYESP_CMD1, HAYESP_SETMODE);
-			bus_space_write_1(iot, hayespioh, HAYESP_CMD2, 
+			bus_space_write_1(iot, hayespioh, HAYESP_CMD2,
 			    HAYESP_MODE_FIFO|HAYESP_MODE_RTS|
 			    HAYESP_MODE_SCALE);
 
@@ -881,7 +885,7 @@ comopen(dev, flag, mode, p)
 
 			/* Set flow control levels */
 			bus_space_write_1(iot, hayespioh, HAYESP_CMD1, HAYESP_SETRXFLOW);
-			bus_space_write_1(iot, hayespioh, HAYESP_CMD2, 
+			bus_space_write_1(iot, hayespioh, HAYESP_CMD2,
 			    HAYESP_HIBYTE(HAYESP_RXHIWMARK));
 			bus_space_write_1(iot, hayespioh, HAYESP_CMD2,
 			    HAYESP_LOBYTE(HAYESP_RXHIWMARK));
@@ -918,7 +922,7 @@ comopen(dev, flag, mode, p)
 			 * Set the FIFO threshold based on the receive speed.
 			 */
 			for (;;) {
-			 	bus_space_write_1(iot, ioh, com_fifo, 0);
+				bus_space_write_1(iot, ioh, com_fifo, 0);
 				delay(100);
 				(void) bus_space_read_1(iot, ioh, com_data);
 				bus_space_write_1(iot, ioh, com_fifo, fifo |
@@ -926,7 +930,7 @@ comopen(dev, flag, mode, p)
 				delay(100);
 				if(!ISSET(bus_space_read_1(iot, ioh,
 				    com_lsr), LSR_RXRDY))
-				    	break;
+					break;
 			}
 			if (sc->sc_uarttype == COM_UART_TI16750)
 				bus_space_write_1(iot, ioh, com_lcr, lcr);
@@ -994,7 +998,7 @@ comopen(dev, flag, mode, p)
 
 	return (*linesw[tp->t_line].l_open)(dev, tp);
 }
- 
+
 int
 comclose(dev, flag, mode, p)
 	dev_t dev;
@@ -1018,14 +1022,14 @@ comclose(dev, flag, mode, p)
 		/* tty device is waiting for carrier; drop dtr then re-raise */
 		CLR(sc->sc_mcr, MCR_DTR | MCR_RTS);
 		bus_space_write_1(iot, ioh, com_mcr, sc->sc_mcr);
-		timeout(com_raisedtr, sc, hz * 2);
+		timeout_add(&sc->sc_dtr_tmo, hz * 2);
 	} else {
 		/* no one else waiting; turn off the uart */
 		compwroff(sc);
 	}
 	CLR(tp->t_state, TS_BUSY | TS_FLUSH);
 	if (--comsopen == 0)
-		untimeout(compoll, NULL);
+		timeout_del(&sc->sc_poll_tmo);
 	sc->sc_cua = 0;
 	splx(s);
 	ttyclose(tp);
@@ -1099,10 +1103,10 @@ comread(dev, uio, flag)
 {
 	struct com_softc *sc = com_cd.cd_devs[DEVUNIT(dev)];
 	struct tty *tp = sc->sc_tty;
- 
+
 	return ((*linesw[tp->t_line].l_read)(tp, uio, flag));
 }
- 
+
 int
 comwrite(dev, uio, flag)
 	dev_t dev;
@@ -1111,7 +1115,7 @@ comwrite(dev, uio, flag)
 {
 	struct com_softc *sc = com_cd.cd_devs[DEVUNIT(dev)];
 	struct tty *tp = sc->sc_tty;
- 
+
 	return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
 }
 
@@ -1124,7 +1128,7 @@ comtty(dev)
 
 	return (tp);
 }
- 
+
 static u_char
 tiocm_xxx2mcr(data)
 	int data;
@@ -1231,9 +1235,9 @@ comioctl(dev, cmd, data, flag, p)
 	case TIOCSFLAGS: {
 		int userbits, driverbits = 0;
 
-		error = suser(p->p_ucred, &p->p_acflag); 
+		error = suser(p->p_ucred, &p->p_acflag);
 		if (error != 0)
-			return(EPERM); 
+			return(EPERM);
 
 		userbits = *(int *)data;
 		if (ISSET(userbits, TIOCFLAG_SOFTCAR) ||
@@ -1493,7 +1497,6 @@ comdiag(arg)
 	floods = sc->sc_floods;
 	sc->sc_floods = 0;
 	splx(s);
-
 	log(LOG_WARNING, "%s: %d silo overflow%s, %d ibuf overflow%s\n",
 	    sc->sc_dev.dv_xname,
 	    overflows, overflows == 1 ? "" : "s",
@@ -1565,10 +1568,10 @@ compoll(arg)
 
 		while (ibufp < ibufend) {
 			c = *ibufp++;
-			if (*ibufp & LSR_OE) {
+			if (ISSET(*ibufp, LSR_OE)) {
 				sc->sc_overflows++;
 				if (sc->sc_errors++ == 0)
-					timeout(comdiag, sc, 60 * hz);
+					timeout_add(&sc->sc_diag_tmo, 60 * hz);
 			}
 			/* This is ugly, but fast. */
 			c |= lsrmap[(*ibufp++ & (LSR_BI|LSR_FE|LSR_PE)) >> 2];
@@ -1577,7 +1580,7 @@ compoll(arg)
 	}
 
 out:
-	timeout(compoll, NULL, 1);
+	timeout_add(&sc->sc_poll_tmo, 1);
 }
 
 #ifdef KGDB
@@ -1701,7 +1704,7 @@ comintr(arg)
 				if (p >= sc->sc_ibufend) {
 					sc->sc_floods++;
 					if (sc->sc_errors++ == 0)
-						timeout(comdiag, sc, 60 * hz);
+						timeout_add(&sc->sc_diag_tmo, 60 * hz);
 				} else {
 					*p++ = data;
 					*p++ = lsr;
diff --git a/sys/dev/ic/comvar.h b/sys/dev/ic/comvar.h
index f5f3bc9cb32..693b4e6f277 100644
--- a/sys/dev/ic/comvar.h
+++ b/sys/dev/ic/comvar.h
@@ -1,4 +1,4 @@
-/*	$OpenBSD: comvar.h,v 1.18 2001/01/24 09:38:04 hugh Exp $	*/
+/*	$OpenBSD: comvar.h,v 1.19 2001/03/13 02:53:52 mickey Exp $	*/
 /*	$NetBSD: comvar.h,v 1.5 1996/05/05 19:50:47 christos Exp $	*/
 
 /*
@@ -62,6 +62,8 @@
  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+#include <sys/timeout.h>
+
 struct commulti_attach_args {
 	int		ca_slave;		/* slave number */
 
@@ -79,6 +81,9 @@ struct com_softc {
 	void *sc_ih;
 	bus_space_tag_t sc_iot;
 	struct tty *sc_tty;
+	struct timeout sc_dtr_tmo;
+	struct timeout sc_diag_tmo;
+	struct timeout sc_poll_tmo;
 
 	int sc_overflows;
 	int sc_floods;