build release bsd.scsi3 from regular bsd file, by using config -e to

clone sd0 out of sd*.  my idea, initial hack by miod, my makefile hackery

2 files changed, 0 insertions, 300 deletions

diff --git a/sys/arch/sparc/compile/.cvsignore b/sys/arch/sparc/compile/.cvsignore
index 92189864ab5..c6f17e65f3b 100644
--- a/sys/arch/sparc/compile/.cvsignore
+++ b/sys/arch/sparc/compile/.cvsignore
@@ -1,5 +1,4 @@
 GENERIC
-GENERIC_SCSI3
 SUN4
 SUN4C
 SUN4M
diff --git a/sys/arch/sparc/conf/GENERIC_SCSI3 b/sys/arch/sparc/conf/GENERIC_SCSI3
deleted file mode 100644
index 1a95e784d8d..00000000000
--- a/sys/arch/sparc/conf/GENERIC_SCSI3
+++ /dev/null
@@ -1,299 +0,0 @@
-#	$OpenBSD: GENERIC_SCSI3,v 1.37 2001/07/21 20:47:55 deraadt Exp $
-# 	$NetBSD: GENERIC,v 1.48 1997/08/23 19:19:01 mjacob Exp $
-
-# Machine architecture; required by config(8)
-machine		sparc
-
-include "../../../conf/GENERIC"
-
-
-# Options for variants of the Sun SPARC architecure.
-# At least one is required.
-option		SUN4		# sun4/100, sun4/200, sun4/300
-option		SUN4C		# sun4c - SS1, 1+, 2, ELC, SLC, IPC, IPX, etc.
-option		SUN4M		# sun4m - SS10, SS20, Classic, etc.
-
-#option		MMU_3L		# 3-level MMU on sun4/400
-
-#option		KGDB		# support for kernel gdb
-#option		KGDBDEV=0xc01	# kgdb device number (dev_t)
-#option		KGDBRATE=38400	# baud rate
-
-# Options for SPARCstation hardware
-option		RASTERCONSOLE	# fast rasterop console
-option		COMPAT_SUNOS	# compatibility with SunOS binaries
-option		COMPAT_SVR4	# compatibility with SVR4 binaries
-
-maxusers	18		# estimated number of users
-
-# Generic swap; second partition of root disk or network.
-config		bsd	swap generic
-
-# Main bus and CPU .. all systems.
-mainbus0 at root
-cpu0	at mainbus0
-
-# Bus types found on SPARC systems.
-sbus0	at mainbus0				# sun4c
-obio0	at mainbus0				# sun4 and sun4m
-vmes0	at mainbus0				# sun4
-vmel0	at mainbus0				# sun4
-iommu0	at mainbus0				# sun4m
-sbus0	at iommu0				# sun4m
-
-audioamd0 at mainbus0				# sun4c
-audioamd0 at obio0				# sun4m
-audioamd0 at sbus0 slot ? offset ?		# sun4m
-audio*	at audioamd?
-
-audiocs0 at sbus0 slot ? offset ?		# sun4m
-audio*	at audiocs?
-
-auxreg0	at mainbus0				# sun4c
-auxreg0	at obio0				# sun4m
-
-# Power status and control register found on Sun4m systems
-power0	at obio0
-
-# Mostek clock found on 4/300, sun4c, and sun4m systems.
-# The Mostek clock NVRAM is the "eeprom" on sun4/300 systems.
-clock0	at mainbus0				# sun4c
-clock0	at obio0				# sun4m
-clock0	at obio0 addr 0xf2000000		# sun4/300
-
-# Intersil clock found on 4/100 and 4/200 systems.
-oclock0	at obio0 addr 0xf3000000		# sun4/200
-oclock0	at obio0 addr 0x03000000		# sun4/100
-
-# Memory error registers.
-memreg0	at mainbus0				# sun4c
-memreg0	at obio0				# sun4m
-memreg0	at obio0 addr 0xf4000000		# sun4/200 and sun4/300
-memreg0	at obio0 addr 0x04000000		# sun4/100
-
-# Timer chip found on 4/300, sun4c, and sun4m systems.
-timer0	at mainbus0				# sun4c
-timer0	at obio0				# sun4m
-timer0	at obio0 addr 0xef000000		# sun4/300
-
-# EEPROM found on 4/100 and 4/200 systems.  Note that the 4/300
-# doesn't use this driver; the `EEPROM' is in the NVRAM on the
-# Mostek clock chip on 4/300 systems.
-eeprom0	at obio0 addr 0xf2000000		# sun4/200
-eeprom0	at obio0 addr 0x02000000		# sun4/100
-
-# 8 segment led display on sun4/sun4m systems
-led0 at mainbus0				# sun4
-led0 at obio0					# sun4/600
-
-# Zilog 8530 serial chips.  Each has two-channels.
-# zs0 is ttya and ttyb.  zs1 is the keyboard and mouse.
-zs0	at mainbus0					# sun4c
-zs0	at obio0					# sun4m
-zs0	at obio0 addr 0xf1000000 level 12 flags 0x103	# sun4/200 and sun4/300
-zs0	at obio0 addr 0x01000000 level 12 flags 0x103	# sun4/100
-zs1	at mainbus0					# sun4c
-zs1	at obio0					# sun4m
-zs1	at obio0 addr 0xf0000000 level 12 flags 0x103	# sun4/200 and sun4/300
-zs1	at obio0 addr 0x00000000 level 12 flags 0x103	# sun4/100
-zs2	at obio0 addr 0xe0000000 level 12 flags 0x103	# sun4/300
-
-# Magma serial/parallel port devices
-magma*	at sbus? slot ? offset ?			# magma serial cards
-mtty*	at magma?
-mbpp*	at magma?
-
-# SUNW,spif serial/parallel port devices
-spif*	at sbus? slot ? offset ?			# spif serial cards
-stty*	at spif?
-sbpp*	at spif?
-
-bpp*	at sbus? slot ? offset ?			# parallel port 
-
-# SUNW,xbox SBus Expansion Subsystem
-xbox*	at sbus? slot ? offset ?			# SBus Expansion box
-sbus*	at xbox?
-
-#
-# Note the flags on the esp entries below, that work around
-# deficiencies in the current driver:
-#	bits 0-7:  disable disconnect/reselect for the corresponding target
-#	bits 8-15: disable synch negotiation for target [bit-8]
-#	Note: targets 4-7 have disconnect/reselect enabled on the premise
-#	      that tape devices normally have one of these targets. Tape
-#	      devices should be allowed to disconnect for the SCSI bus
-#	      to operate acceptably.
-#
-
-# sun4/300 SCSI - an NCR53c94 or equivalent behind
-# an LSI Logic DMA controller
-dma0	at obio0 addr 0xfa001000 level 4		# sun4/300
-esp0	at obio0 addr 0xfa000000 level 4 flags 0xff0f	#
-
-# sun4c or sun4m SCSI - an NCR53c94 or equivalent behind
-# specialized DMA glue
-dma0	at sbus0 slot ? offset ?			# on-board SCSI
-esp0	at sbus0 slot ? offset ? flags 0xff0f		# sun4c
-esp0	at dma0 flags 0xff0f				# sun4m
-
-# FSBE/S SCSI - an NCR53c94 or equivalent behind
-dma*	at sbus? slot ? offset ?			# SBus SCSI
-esp*	at sbus? slot ? offset ? flags 0xff0f		# two flavours
-esp*	at dma? flags 0xff0f				# depending on model
-
-#sun4c, sun4m
-isp*	at sbus? slot ? offset ?
-
-# sun4m Ethernet - an AMD 7990 LANCE behind
-# specialized DMA glue
-ledma0	at sbus0 slot ? offset ?			# sun4m on-board
-le0	at ledma0					#
-
-# Additional SBus LANCE devices - glued on by lebuffer
-lebuffer0	at sbus0 slot ? offset ?		# sun4m SBus
-lebuffer*	at sbus? slot ? offset ?		# sun4m SBus
-le0	at lebuffer0					#
-le*	at lebuffer?					#
-
-# sun4/300 and sun4c Ethernet - an AMD 7990 LANCE
-le0	at sbus0 slot ? offset ?			# sun4c on-board
-le*	at sbus? slot ? offset ?
-
-le0	at obio0 addr 0xf9000000 level 6		# sun4/300
-
-# sun4/100 and sun4/200 Ethernet - an Intel 82586 on-board
-# or on a Multibus/VME card.
-ie0	at obio0 addr 0xf6000000 level 6		# sun4/200 on-board
-ie0	at obio0 addr 0x06000000 level 6		# sun4/100 on-board
-
-ie1	at vmes0 addr 0xffe88000 level 5 vect 0x75
-ie2	at vmes0 addr 0xff31ff02 level 5 vect 0x76
-ie3	at vmes0 addr 0xff35ff02 level 5 vect 0x77
-ie4	at vmes0 addr 0xff2dff02 level 5 vect 0x7c
-
-# HappyMeal ethernet
-hme*	at sbus? slot ? offset ?
-# Media Independent Interface (mii) drivers (required by hme)
-nsphy*	at mii? phy ?				# NS and compatible PHYs
-qsphy*	at mii? phy ?				# Quality Semi QS6612 PHYs
-
-# Quad-ethernet glue device, and sub-devices
-qec*	at sbus? slot ? offset ?
-qe*	at qec?
-be*	at qec?
-
-# Xylogics 753 or 7053 VME SMD disk controllers and disks, found
-# on sun4 systems.
-xdc0	at vmel0 addr 0xffffee80 level 3 vect 0x44
-xdc1	at vmel0 addr 0xffffee90 level 3 vect 0x45
-xdc2	at vmel0 addr 0xffffeea0 level 3 vect 0x46
-xdc3	at vmel0 addr 0xffffeeb0 level 3 vect 0x47
-xd*	at xdc? drive ?
-
-# Xylogics 451 or 451 VME SMD disk controllers and disks, found
-# on sun4 systems.
-xyc0	at vmes0 addr 0xffffee40 level 3 vect 0x48
-xyc1	at vmes0 addr 0xffffee48 level 3 vect 0x49
-xy*	at xyc? drive ?
-
-# NCR5380-based "Sun SCSI 3" VME SCSI controller.
-# This driver has several flags which may be enabled by OR'ing
-# the values and using the "flags" directive.
-# Valid flags are:
-#
-#	0x01		Use DMA (may be polled)
-#	0x02		Use DMA completion interrupts
-#	0x04		Allow disconnect/reselect
-#
-# E.g. the following would enable DMA, interrupts, and reselect:
-# si0	at vmes0 addr 0xff200000 level 3 vect 0x40 flags 0x07
-#
-# By default, DMA is enabled in the driver.
-si0	at vmes0 addr 0xff200000 level 3 vect 0x40
-
-# NCR5380-based "SCSI Weird" on-board SCSI interface found
-# on sun4/100 systems.  The flags are the same as the "si"
-# controller.  Note, while DMA is enabled by default, only
-# polled DMA works at this time, and reselects do not work
-# on this particular controller.
-sw0	at obio0 addr 0x0a000000 level 3
-
-# Sun "bwtwo" black and white framebuffer, found on sun4, sun4c, and sun4m
-# systems.  If your sun4 system has a cgfour installed in the P4 slot,
-# the P4 entries for "bwtwo" will attach to the overlay plane of the
-# "cgfour".
-bwtwo0	at sbus0 slot ? offset ?		# sun4c on-board
-bwtwo*	at sbus? slot ? offset ?		# sun4c and sun4m
-bwtwo0	at obio0 addr 0xfd000000 level 4	# sun4/200
-bwtwo0	at obio0 addr 0xfb300000 level 4	# sun4/300 in P4 slot
-bwtwo0	at obio0 addr 0x0b300000 level 4	# sun4/100 in P4 slot
-
-# Sun "cgtwo" VME color framebuffer
-cgtwo0	at vmes0 addr 0xff400000 level 4 vect 0xa8
-
-# Sun "cgthree" Sbus color framebuffer
-cgthree0 at sbus? slot ? offset ?
-cgthree* at sbus? slot ? offset ?
-#cgthree0 at obio? slot ? offset ?		# sun4m
-#cgthree* at obio? slot ? offset ?		# sun4m
-
-# Sun "cgfour" color framebuffer with overlay plane.  See above comment
-# regarding overlay plane.
-cgfour0	at obio0 addr 0xfb300000 level 4	# sun4/300 P4
-cgfour0	at obio0 addr 0x0b300000 level 4	# sun4/100 P4
-
-# Sun "cgsix" accelerated color framebuffer.
-cgsix0	at sbus? slot ? offset ?
-cgsix*	at sbus? slot ? offset ?
-cgsix0	at obio0 addr 0xfb000000 level 4	# sun4/300 P4
-cgsix0	at obio0 addr 0x0b000000 level 4	# sun4/100 P4
-
-# Sun "cgeight" 24-bit framebuffer
-cgeight0 at obio0 addr 0xfb300000 level 4	# sun4/300 P4
-cgeight0 at obio0 addr 0x0b300000 level 4	# sun4/100 P4
-
-# Sun "tcx" accelerated color framebuffer.
-tcx0	at sbus? slot ? offset ?
-tcx*	at sbus? slot ? offset ?
-
-# Sun "cgfourteen" accelerated 24-bit framebuffer.
-cgfourteen0	at obio0			# sun4m
-
-# Weitek p9100 found on Tadpole 3GS/3GX
-pnozz0	at sbus? slot ? offset ?
-# Microcontroller found on Tadpole
-tctrl0	at obio0
-
-# SCSI bus layer.  SCSI devices attach to the SCSI bus, which attaches
-# to the underlying hardware controller.
-scsibus* at esp?
-scsibus* at si?
-scsibus* at sw?
-scsibus* at isp?
-
-# Map the SCSI disk at target 3 to unit 0, a'la SunOS.
-sd0    at scsibus? target 3 lun ?
-
-# These entries find devices on all SCSI busses and assign
-# unit numers dynamically.
-sd*	at scsibus? target ? lun ?		# SCSI disks
-st*	at scsibus? target ? lun ?		# SCSI tapes
-cd*	at scsibus? target ? lun ?		# SCSI CD-ROMs
-ch*	at scsibus? target ? lun ?		# SCSI changer devices
-ss*	at scsibus? target ? lun ?		# SCSI scanners
-uk*	at scsibus? target ? lun ?		# unknown SCSI devices
-
-# Floppy controller and drive found on SPARCstations.
-fdc0	at mainbus0				# sun4c controller
-fdc0	at obio0				# sun4m controller
-fd*	at fdc0					# the drive itself
-
-# flash memory, sysconfig regs, and VME for Force boards
-#scf0	at mainbus0				# FORCE CPU-5V sysconfig
-#flash0	at obio0				# FORCE CPU-5V flash-memory
-#fga0	at iommu0				# FORCE CPU-5V VME/SBus bridge
-#fvme*	at fga0					# FORCE CPU-5V
-#daadio*	at fvme? addr 0x0 level 1 vect 0x1f	# Matrix MD-DAADIO board
-
-pseudo-device	kbd		# Sun keyboard
-#pseudo-device	strip	1	# radio clock