summaryrefslogtreecommitdiff
path: root/sys
diff options
context:
space:
mode:
authorFederico G. Schwindt <fgsch@cvs.openbsd.org>2000-04-19 21:35:11 +0000
committerFederico G. Schwindt <fgsch@cvs.openbsd.org>2000-04-19 21:35:11 +0000
commita12020f22010f3aee2bdf2018226950cc5e211a3 (patch)
tree9471add3669f6d6ad6a4a413c1210fd99655ee75 /sys
parenta17a065946b2daf1583a33559f996cb8d9c04db6 (diff)
* use different numbers of transmit buffers depending on the memory
size (not working yet), useful for 100mbit cards. * add some diagnostic messages * compute the xmit buffer length w/o taking crc length in count * when SIOCSIFFLAGS is issued and none of the above conditions match, check for IFF_UP rather than sc_enabled.
Diffstat (limited to 'sys')
-rw-r--r--sys/dev/ic/dp8390.c19
1 files changed, 15 insertions, 4 deletions
diff --git a/sys/dev/ic/dp8390.c b/sys/dev/ic/dp8390.c
index fab89b398aa..966bb010905 100644
--- a/sys/dev/ic/dp8390.c
+++ b/sys/dev/ic/dp8390.c
@@ -1,4 +1,4 @@
-/* $OpenBSD: dp8390.c,v 1.5 1999/08/13 21:10:14 deraadt Exp $ */
+/* $OpenBSD: dp8390.c,v 1.6 2000/04/19 21:35:10 fgsch Exp $ */
/* $NetBSD: dp8390.c,v 1.13 1998/07/05 06:49:11 jonathan Exp $ */
/*
@@ -111,8 +111,10 @@ dp8390_config(sc, media, nmedia, defmedia)
if ((sc->mem_size < 16384) ||
(sc->sc_flags & DP8390_NO_MULTI_BUFFERING))
sc->txb_cnt = 1;
- else
+ else if (sc->mem_size < 8192 * 3)
sc->txb_cnt = 2;
+ else
+ sc->txb_cnt = 3;
sc->tx_page_start = sc->mem_start >> ED_PAGE_SHIFT;
sc->rec_page_start = sc->tx_page_start + sc->txb_cnt * ED_TXBUF_SIZE;
@@ -432,6 +434,15 @@ dp8390_xmit(sc)
#endif
u_short len;
+#ifdef DIAGNOSTIC
+ if ((sc->txb_next_tx + sc->txb_inuse) % sc->txb_cnt != sc->txb_new)
+ panic("dp8390_xmit: desync, next_tx=%d inuse=%d cnt=%d new=%d",
+ sc->txb_next_tx, sc->txb_inuse, sc->txb_cnt, sc->txb_new);
+
+ if (sc->txb_inuse == 0)
+ panic("dp8390_xmit: no packets to xmit\n");
+#endif
+
len = sc->txb_len[sc->txb_next_tx];
/* Set NIC for page 0 register access. */
@@ -510,7 +521,7 @@ outloop:
len = dp8390_write_mbuf(sc, m0, buffer);
m_freem(m0);
- sc->txb_len[sc->txb_new] = max(len, ETHER_MIN_LEN);
+ sc->txb_len[sc->txb_new] = max(len, ETHER_MIN_LEN - ETHER_CRC_LEN);
/* Point to next buffer slot and wrap if necessary. */
if (++sc->txb_new == sc->txb_cnt)
@@ -916,7 +927,7 @@ dp8390_ioctl(ifp, cmd, data)
if ((error = dp8390_enable(sc)) != 0)
break;
dp8390_init(sc);
- } else if (sc->sc_enabled) {
+ } else if ((ifp->if_flags & IFF_UP) != 0) {
/*
* Reset the interface to pick up changes in any other
* flags that affect hardware registers.