diff options
author | Theo de Raadt <deraadt@cvs.openbsd.org> | 2006-06-21 18:52:03 +0000 |
---|---|---|
committer | Theo de Raadt <deraadt@cvs.openbsd.org> | 2006-06-21 18:52:03 +0000 |
commit | 39d5297e9b7ced3f9dc8b7b4819534b475816bbd (patch) | |
tree | c303306c8fe1faa56877cffddb83d3a6d17e624e /sys | |
parent | d7ecf25662a1c749dfdb8cdd1219c797cf14600e (diff) |
minimal cleaning
Diffstat (limited to 'sys')
-rw-r--r-- | sys/dev/usb/if_zydreg.h | 76 |
1 files changed, 38 insertions, 38 deletions
diff --git a/sys/dev/usb/if_zydreg.h b/sys/dev/usb/if_zydreg.h index bdc1a195a64..54ae9704947 100644 --- a/sys/dev/usb/if_zydreg.h +++ b/sys/dev/usb/if_zydreg.h @@ -1,4 +1,4 @@ -/* $Id: if_zydreg.h,v 1.1 2006/06/21 18:45:11 deraadt Exp $ */ +/* $OpenBSD: if_zydreg.h,v 1.2 2006/06/21 18:52:02 deraadt Exp $ */ /* * Copyright (c) 2006 by Florian Stoehr <ich@florian-stoehr.de> @@ -15,7 +15,7 @@ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ - + /* * ZyDAS ZD1211 USB WLAN driver */ @@ -28,7 +28,7 @@ * - EEPROM register space (16-bit registers) * - Firmware register space (16-bit registers) * - * I'll use the masks and type constants below to handle + * I'll use the masks and type constants below to handle * register filtering in code (require different treatment). */ @@ -39,7 +39,7 @@ enum zyd_masks { enum zyd_ranges { ZYD_RANGE_USB = 0x10000, /* Range: USB */ - ZYD_RANGE_CTL = 0x20000, /* Range: Control */ + ZYD_RANGE_CTL = 0x20000, /* Range: Control */ ZYD_RANGE_E2P = 0x40000, /* Range: EEPROM */ ZYD_RANGE_FW = 0x80000 /* Range: Firmware */ }; @@ -54,7 +54,7 @@ enum zyd_ranges { /* Mask register offset (kick the range off) */ #define ZYD_GET_OFFS(addr) \ (ZYD_MASK_NORM & ((uint32_t)(addr) & ZYD_MASK_ADDR_OFFS)) - + /* Combine range and offset */ #define ZYD_BUILDCOMBO(range, offs) \ (ZYD_GET_RANGE(range) | ZYD_GET_OFFS(offs)) @@ -71,7 +71,7 @@ enum zyd_ranges { #define ZYD_CR_ENABLE_PS_MANUAL_AGC ZYD_REG_CTL(0x43C) #define ZYD_CR_CONFIG_PHILIPS ZYD_REG_CTL(0x440) #define ZYD_CR_SA2400_SER_AP ZYD_REG_CTL(0x444) -#define ZYD_CR_I2C_WRITE ZYD_REG_CTL(0x444) +#define ZYD_CR_I2C_WRITE ZYD_REG_CTL(0x444) #define ZYD_CR_SA2400_SER_RP ZYD_REG_CTL(0x448) #define ZYD_CR_RADIO_PE ZYD_REG_CTL(0x458) #define ZYD_CR_RST_BUS_MASTER ZYD_REG_CTL(0x45C) @@ -88,7 +88,7 @@ enum zyd_ranges { #define ZYD_CR_ADDA_MBIAS_WARMTIME ZYD_REG_CTL(0x508) #define ZYD_CR_INTERRUPT ZYD_REG_CTL(0x510) #define ZYD_CR_MAC_PS_STATE ZYD_REG_CTL(0x50C) - + /* * Following three values are in time units (1024us) * Following condition must be met: @@ -100,7 +100,7 @@ enum zyd_ranges { /* * MAC registers - */ + */ #define ZYD_MAC_MACADDRL ZYD_REG_CTL(0x610) /* MAC address (low) */ #define ZYD_MAC_MACADDRH ZYD_REG_CTL(0x614) /* MAC address (high) */ #define ZYD_MAC_BSSADRL ZYD_REG_CTL(0x618) /* BSS address (low) */ @@ -220,7 +220,7 @@ enum zyd_ranges { #define ZYD_FIRMDOWN_REQ 0x40 /* Firmware dl request type */ #define ZYD_FIRMDOWN_ID 0x30 /* Firmware dl ID */ #define ZYD_FIRMSTAT_REQ 0xC0 /* Firmware stat query type */ -#define ZYD_FIRMSTAT_ID 0x31 /* Firmware stat query ID */ +#define ZYD_FIRMSTAT_ID 0x31 /* Firmware stat query ID */ /* * Firmware uploader - status @@ -289,7 +289,7 @@ enum zyd_ranges { #define ZYD_RF_REG_BITS 6 #define ZYD_RF_VALUE_BITS 18 #define ZYD_RF_RV_BITS ZYD_RF_REG_BITS + ZYD_RF_VALUE_BITS - + /* * Various */ @@ -332,11 +332,11 @@ enum zyd_ranges { #define ZYD_CR9 ZYD_REG_CTL(0x0024) /* bit 2: antenna switch (together with ZYD_CR10) */ -#define ZYD_CR10 ZYD_REG_CTL(0x0028) +#define ZYD_CR10 ZYD_REG_CTL(0x0028) /* bit 1: antenna switch (together with ZYD_CR9) * RF2959 controls with ZYD_CR11 radion on and off */ -#define ZYD_CR11 ZYD_REG_CTL(0x002C) +#define ZYD_CR11 ZYD_REG_CTL(0x002C) /* bit 6: TX power control for OFDM * RF2959 controls with ZYD_CR10 radio on and off */ @@ -588,7 +588,7 @@ enum zyd_ranges { /* * Device configurations and types */ - + struct zyd_type { uint16_t vid; uint16_t pid; @@ -612,7 +612,7 @@ struct zyd_type zyd_devs[] = { { 0x2019, 0xc007 }, /* Planex GW-US54GZL */ { 0x5173, 0x1809 }, /* Sweex wireless USB 54 Mbps */ { 0x6891, 0xa727 }, /* 3COM 3CRUSB10075 */ - { } + { } }; static const char *zyd_rfs[] = { @@ -640,7 +640,7 @@ struct zyd_channel_range { uint8_t end; /* exclusive (channel must be less than end) */ }; -/* +/* * Blows size up (132 bytes, but not that smaller than extra * mapping code, so ... */ @@ -660,11 +660,11 @@ static const struct zyd_channel_range zyd_channel_ranges[] = { * Supported rates for 802.11b/g modes (in 500Kbps unit). */ static const struct ieee80211_rateset zyd_rateset_11b = { - 4, { 2, 4, 11, 22 } + 4, { 2, 4, 11, 22 } }; -static const struct ieee80211_rateset zyd_rateset_11g = { - 8, { 12, 18, 24, 36, 48, 72, 96, 108 } +static const struct ieee80211_rateset zyd_rateset_11g = { + 8, { 12, 18, 24, 36, 48, 72, 96, 108 } }; /* @@ -674,7 +674,7 @@ static const struct ieee80211_rateset zyd_rateset_11g = { /* * Driver internal */ - + enum zyd_operationmode { OM_NONEYET = 0, OM_ADHOC = 1, @@ -721,14 +721,14 @@ enum zyd_stohostflags { /* * Control set format - */ + */ enum zyd_controlsetformatrate { /* MBPS rates for Direct Sequence Spread Spectrum */ CSF_RT_CCK_1 = 0x00, CSF_RT_CCK_2 = 0x01, CSF_RT_CCK_5_5 = 0x02, CSF_RT_CCK_11 = 0x03, - + /* MBPS rates for Orthogonal Frequency Division Multiplexing */ CSF_RT_OFDM_6 = 0x0b, CSF_RT_OFDM_9 = 0x0f, @@ -828,15 +828,15 @@ enum zyd_rxstatusreportframestaterrind { /* * Structures */ - + struct zyd_controlsetformat { uint8_t rate :4; uint8_t modulationtype :1; uint8_t preamble :1; uint8_t reserved :2; - + uint16_t txlen; - + uint8_t needbackoff :1; uint8_t multicast :1; uint8_t frametype :2; @@ -844,7 +844,7 @@ struct zyd_controlsetformat { uint8_t rts :1; uint8_t encryption :1; uint8_t selfcts :1; - + uint16_t packetlength; uint16_t currentlength; uint8_t service; @@ -856,7 +856,7 @@ struct zyd_rxstatusreport { uint8_t signalqualitycck; uint8_t signalqualityofdm; uint8_t decryptiontype; - + uint8_t modulationtype :1; uint8_t rxerrorreason :6; uint8_t errorindication :1; @@ -919,7 +919,7 @@ struct zyd_intinsingle uWord sts2; uWord sts3; uWord sts4; - uWord sts5; + uWord sts5; } UPACKED; /* Int/bulk OUT interface @ EP 4 (single register access) */ @@ -948,7 +948,7 @@ struct zyd_intinmultioutput { /* Int/bulk OUT interface @ EP 4 (multi register access) read */ struct zyd_intoutmultiread { uWord id; - uWord addr[15]; + uWord addr[15]; } UPACKED; /* Int/bulk OUT interface @ EP 4 (multi register access) write */ @@ -1055,16 +1055,16 @@ struct zyd_softc { USBBASEDEVICE zyd_dev; struct ieee80211com sc_ic; int (*sc_newstate)(struct ieee80211com *, enum ieee80211_state, int); - + /* Interrupt related */ int pending; - struct clist q_reply; /* queue for register read replies */ + struct clist q_reply; /* queue for register read replies */ uint8_t *ibuf; struct selinfo rsel; - + /* Device state */ enum ieee80211_state sc_state; - + /* Command to device (for usb task) */ enum zyd_cmd sc_cmd; @@ -1079,7 +1079,7 @@ struct zyd_softc { /* Calibration tables */ uint8_t pwr_cal_values[ZYD_E2P_CHANNEL_COUNT]; uint8_t pwr_int_values[ZYD_E2P_CHANNEL_COUNT]; - uint8_t ofdm_cal_values[3][ZYD_E2P_CHANNEL_COUNT]; + uint8_t ofdm_cal_values[3][ZYD_E2P_CHANNEL_COUNT]; /* USB stuff */ struct usb_task sc_task; @@ -1087,11 +1087,11 @@ struct zyd_softc { usbd_interface_handle zyd_iface; int zyd_ed[ZYD_ENDPT_CNT]; usbd_pipe_handle zyd_ep[ZYD_ENDPT_CNT]; - + /* Ethernet stuff */ /* struct ethercom zyd_ec;*/ struct ifmedia zyd_media; - + /* TX/RX */ struct zyd_rx_data rx_data[ZYD_RX_LIST_CNT]; struct zyd_tx_data tx_data[ZYD_TX_LIST_CNT]; @@ -1101,11 +1101,11 @@ struct zyd_softc { int zyd_if_flags; struct timeval zyd_rx_notice; - + struct timeout scan_ch; - + int tx_timer; - + /* WLAN specific */ enum zyd_operationmode zyd_operation; uint8_t zyd_bssid[ETHER_ADDR_LEN]; |