another try to re-add it

1 files changed, 7459 insertions, 0 deletions

diff --git a/sys/dev/ic/aic7xxx.c b/sys/dev/ic/aic7xxx.c
new file mode 100644
index 00000000000..f1dff32e655
--- /dev/null
+++ b/sys/dev/ic/aic7xxx.c
@@ -0,0 +1,7459 @@
+/*	$OpenBSD: aic7xxx.c,v 1.57 2004/06/05 04:32:50 deraadt Exp $	*/
+/*	$NetBSD: aic7xxx.c,v 1.108 2003/11/02 11:07:44 wiz Exp $	*/
+
+/*
+ * Core routines and tables shareable across OS platforms.
+ *
+ * Copyright (c) 1994-2002 Justin T. Gibbs.
+ * Copyright (c) 2000-2002 Adaptec Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ * $Id: aic7xxx.c,v 1.57 2004/06/05 04:32:50 deraadt Exp $
+ *
+ * //depot/aic7xxx/aic7xxx/aic7xxx.c#112 $
+ *
+ * $FreeBSD: /repoman/r/ncvs/src/sys/dev/aic7xxx/aic7xxx.c,v 1.88 2003/01/20 20:44:55 gibbs Exp $
+ */
+/*
+ * Ported from FreeBSD by Pascal Renauld, Network Storage Solutions, Inc. - April 2003
+ */
+
+#include <sys/cdefs.h>
+/* __KERNEL_RCSID(0, "$NetBSD: aic7xxx.c,v 1.108 2003/11/02 11:07:44 wiz Exp $"); */
+
+#include <dev/ic/aic7xxx_openbsd.h>
+#include <dev/ic/aic7xxx_inline.h>
+#include <dev/microcode/aic7xxx/aicasm_insformat.h>
+
+/****************************** Softc Data ************************************/
+struct ahc_softc_tailq ahc_tailq = TAILQ_HEAD_INITIALIZER(ahc_tailq);
+
+/***************************** Lookup Tables **********************************/
+char *ahc_chip_names[] =
+{
+	"NONE",
+	"aic7770",
+	"aic7850",
+	"aic7855",
+	"aic7859",
+	"aic7860",
+	"aic7870",
+	"aic7880",
+	"aic7895",
+	"aic7895C",
+	"aic7890/91",
+	"aic7896/97",
+	"aic7892",
+	"aic7899"
+};
+
+/*
+ * Hardware error codes.
+ */
+struct ahc_hard_error_entry {
+        uint8_t errno;
+	char *errmesg;
+};
+
+static struct ahc_hard_error_entry ahc_hard_errors[] = {
+	{ ILLHADDR,	"Illegal Host Access" },
+	{ ILLSADDR,	"Illegal Sequencer Address referrenced" },
+	{ ILLOPCODE,	"Illegal Opcode in sequencer program" },
+	{ SQPARERR,	"Sequencer Parity Error" },
+	{ DPARERR,	"Data-path Parity Error" },
+	{ MPARERR,	"Scratch or SCB Memory Parity Error" },
+	{ PCIERRSTAT,	"PCI Error detected" },
+	{ CIOPARERR,	"CIOBUS Parity Error" },
+};
+static const u_int num_errors = NUM_ELEMENTS(ahc_hard_errors);
+
+static struct ahc_phase_table_entry ahc_phase_table[] =
+{
+	{ P_DATAOUT,	MSG_NOOP,		"in Data-out phase"	},
+	{ P_DATAIN,	MSG_INITIATOR_DET_ERR,	"in Data-in phase"	},
+	{ P_DATAOUT_DT,	MSG_NOOP,		"in DT Data-out phase"	},
+	{ P_DATAIN_DT,	MSG_INITIATOR_DET_ERR,	"in DT Data-in phase"	},
+	{ P_COMMAND,	MSG_NOOP,		"in Command phase"	},
+	{ P_MESGOUT,	MSG_NOOP,		"in Message-out phase"	},
+	{ P_STATUS,	MSG_INITIATOR_DET_ERR,	"in Status phase"	},
+	{ P_MESGIN,	MSG_PARITY_ERROR,	"in Message-in phase"	},
+	{ P_BUSFREE,	MSG_NOOP,		"while idle"		},
+	{ 0,		MSG_NOOP,		"in unknown phase"	}
+};
+
+/*
+ * In most cases we only wish to itterate over real phases, so
+ * exclude the last element from the count.
+ */
+static const u_int num_phases = NUM_ELEMENTS(ahc_phase_table) - 1;
+
+/*
+ * Valid SCSIRATE values.  (p. 3-17)
+ * Provides a mapping of transfer periods in ns to the proper value to
+ * stick in the scsixfer reg.
+ */
+static struct ahc_syncrate ahc_syncrates[] =
+{
+      /* ultra2    fast/ultra  period     rate */
+	{ 0x42,      0x000,      9,      "80.0" },
+	{ 0x03,      0x000,     10,      "40.0" },
+	{ 0x04,      0x000,     11,      "33.0" },
+	{ 0x05,      0x100,     12,      "20.0" },
+	{ 0x06,      0x110,     15,      "16.0" },
+	{ 0x07,      0x120,     18,      "13.4" },
+	{ 0x08,      0x000,     25,      "10.0" },
+	{ 0x19,      0x010,     31,      "8.0"  },
+	{ 0x1a,      0x020,     37,      "6.67" },
+	{ 0x1b,      0x030,     43,      "5.7"  },
+	{ 0x1c,      0x040,     50,      "5.0"  },
+	{ 0x00,      0x050,     56,      "4.4"  },
+	{ 0x00,      0x060,     62,      "4.0"  },
+	{ 0x00,      0x070,     68,      "3.6"  },
+	{ 0x00,      0x000,      0,      NULL   }
+};
+
+/* Our Sequencer Program */
+#include <dev/microcode/aic7xxx/aic7xxx_seq.h>
+
+/**************************** Function Declarations ***************************/
+static void		ahc_force_renegotiation(struct ahc_softc *);
+static struct ahc_tmode_tstate*
+			ahc_alloc_tstate(struct ahc_softc *ahc,
+					 u_int scsi_id, char channel);
+#ifdef AHC_TARGET_MODE
+static void		ahc_free_tstate(struct ahc_softc *ahc,
+					u_int scsi_id, char channel, int force);
+#endif
+static struct ahc_syncrate*
+			ahc_devlimited_syncrate(struct ahc_softc *ahc,
+					        struct ahc_initiator_tinfo *,
+						u_int *period,
+						u_int *ppr_options,
+						role_t role);
+static void		ahc_update_pending_scbs(struct ahc_softc *ahc);
+static void		ahc_fetch_devinfo(struct ahc_softc *ahc,
+					  struct ahc_devinfo *devinfo);
+static void		ahc_assert_atn(struct ahc_softc *ahc);
+static void		ahc_setup_initiator_msgout(struct ahc_softc *ahc,
+						   struct ahc_devinfo *devinfo,
+						   struct scb *scb);
+static void		ahc_build_transfer_msg(struct ahc_softc *ahc,
+					       struct ahc_devinfo *devinfo);
+static void		ahc_construct_sdtr(struct ahc_softc *ahc,
+					   struct ahc_devinfo *devinfo,
+					   u_int period, u_int offset);
+static void		ahc_construct_wdtr(struct ahc_softc *ahc,
+					   struct ahc_devinfo *devinfo,
+					   u_int bus_width);
+static void		ahc_construct_ppr(struct ahc_softc *ahc,
+					  struct ahc_devinfo *devinfo,
+					  u_int period, u_int offset,
+					  u_int bus_width, u_int ppr_options);
+static void		ahc_clear_msg_state(struct ahc_softc *ahc);
+static void		ahc_handle_proto_violation(struct ahc_softc *ahc);
+static void		ahc_handle_message_phase(struct ahc_softc *ahc);
+typedef enum {
+	AHCMSG_1B,
+	AHCMSG_2B,
+	AHCMSG_EXT
+} ahc_msgtype;
+static int		ahc_sent_msg(struct ahc_softc *ahc, ahc_msgtype type,
+				     u_int msgval, int full);
+static int		ahc_parse_msg(struct ahc_softc *ahc,
+				      struct ahc_devinfo *devinfo);
+static int		ahc_handle_msg_reject(struct ahc_softc *ahc,
+					      struct ahc_devinfo *devinfo);
+static void		ahc_handle_ign_wide_residue(struct ahc_softc *ahc,
+						struct ahc_devinfo *devinfo);
+static void		ahc_reinitialize_dataptrs(struct ahc_softc *ahc);
+static void		ahc_handle_devreset(struct ahc_softc *ahc,
+					    struct ahc_devinfo *devinfo,
+					    cam_status status, char *message,
+					    int verbose_level);
+#if AHC_TARGET_MODE
+static void		ahc_setup_target_msgin(struct ahc_softc *ahc,
+					       struct ahc_devinfo *devinfo,
+					       struct scb *scb);
+#endif
+
+//static bus_dmamap_callback_t	ahc_dmamap_cb; 
+static void			ahc_build_free_scb_list(struct ahc_softc *ahc);
+static int			ahc_init_scbdata(struct ahc_softc *ahc);
+static void			ahc_fini_scbdata(struct ahc_softc *ahc);
+static void		ahc_qinfifo_requeue(struct ahc_softc *ahc,
+					    struct scb *prev_scb,
+					    struct scb *scb);
+static int		ahc_qinfifo_count(struct ahc_softc *ahc);
+static u_int		ahc_rem_scb_from_disc_list(struct ahc_softc *ahc,
+						   u_int prev, u_int scbptr);
+static void		ahc_add_curscb_to_free_list(struct ahc_softc *ahc);
+static u_int		ahc_rem_wscb(struct ahc_softc *ahc,
+				     u_int scbpos, u_int prev);
+static void		ahc_reset_current_bus(struct ahc_softc *ahc);
+#ifdef AHC_DUMP_SEQ
+static void		ahc_dumpseq(struct ahc_softc *ahc);
+#endif
+static void		ahc_loadseq(struct ahc_softc *ahc);
+static int		ahc_check_patch(struct ahc_softc *ahc,
+					const struct patch **start_patch,
+					u_int start_instr, u_int *skip_addr);
+static void		ahc_download_instr(struct ahc_softc *ahc,
+					   u_int instrptr, uint8_t *dconsts);
+#ifdef AHC_TARGET_MODE
+static void		ahc_queue_lstate_event(struct ahc_softc *ahc,
+					       struct ahc_tmode_lstate *lstate,
+					       u_int initiator_id,
+					       u_int event_type,
+					       u_int event_arg);
+static void		ahc_update_scsiid(struct ahc_softc *ahc,
+					  u_int targid_mask);
+static int		ahc_handle_target_cmd(struct ahc_softc *ahc,
+					      struct target_cmd *cmd);
+#endif
+
+/************************** Added for porting to NetBSD ***********************/
+static int ahc_createdmamem(bus_dma_tag_t tag,
+			    int size,
+			    int flags,
+			    bus_dmamap_t *mapp,
+			    caddr_t *vaddr,
+			    bus_addr_t *baddr,
+			    bus_dma_segment_t *seg,
+			    int *nseg,
+			    const char *myname, const char *what);
+static void ahc_freedmamem(bus_dma_tag_t tag,
+			   int size,
+			   bus_dmamap_t map,
+			   caddr_t vaddr,
+			   bus_dma_segment_t *seg,
+			   int nseg);
+
+/************************* Sequencer Execution Control ************************/
+/*
+ * Restart the sequencer program from address zero
+ */
+void
+ahc_restart(struct ahc_softc *ahc)
+{
+
+	ahc_pause(ahc);
+
+	/* No more pending messages. */
+	ahc_clear_msg_state(ahc);
+
+	ahc_outb(ahc, SCSISIGO, 0);		/* De-assert BSY */
+	ahc_outb(ahc, MSG_OUT, MSG_NOOP);	/* No message to send */
+	ahc_outb(ahc, SXFRCTL1, ahc_inb(ahc, SXFRCTL1) & ~BITBUCKET);
+	ahc_outb(ahc, LASTPHASE, P_BUSFREE);
+	ahc_outb(ahc, SAVED_SCSIID, 0xFF);
+	ahc_outb(ahc, SAVED_LUN, 0xFF);
+
+	/*
+	 * Ensure that the sequencer's idea of TQINPOS
+	 * matches our own.  The sequencer increments TQINPOS
+	 * only after it sees a DMA complete and a reset could
+	 * occur before the increment leaving the kernel to believe
+	 * the command arrived but the sequencer to not.
+	 */
+	ahc_outb(ahc, TQINPOS, ahc->tqinfifonext);
+
+	/* Always allow reselection */
+	ahc_outb(ahc, SCSISEQ,
+		 ahc_inb(ahc, SCSISEQ_TEMPLATE) & (ENSELI|ENRSELI|ENAUTOATNP));
+	if ((ahc->features & AHC_CMD_CHAN) != 0) {
+		/* Ensure that no DMA operations are in progress */
+		ahc_outb(ahc, CCSCBCNT, 0);
+		ahc_outb(ahc, CCSGCTL, 0);
+		ahc_outb(ahc, CCSCBCTL, 0);
+	}
+	/*
+	 * If we were in the process of DMA'ing SCB data into
+	 * an SCB, replace that SCB on the free list.  This prevents
+	 * an SCB leak.
+	 */
+	if ((ahc_inb(ahc, SEQ_FLAGS2) & SCB_DMA) != 0) {
+		ahc_add_curscb_to_free_list(ahc);
+		ahc_outb(ahc, SEQ_FLAGS2,
+			 ahc_inb(ahc, SEQ_FLAGS2) & ~SCB_DMA);
+	}
+	ahc_outb(ahc, MWI_RESIDUAL, 0);
+	ahc_outb(ahc, SEQCTL, FASTMODE);
+	ahc_outb(ahc, SEQADDR0, 0);
+	ahc_outb(ahc, SEQADDR1, 0);
+	ahc_unpause(ahc);
+}
+
+/************************* Input/Output Queues ********************************/
+void
+ahc_run_qoutfifo(struct ahc_softc *ahc)
+{
+	struct scb *scb;
+	u_int  scb_index;
+
+	ahc_sync_qoutfifo(ahc, BUS_DMASYNC_POSTREAD);
+	while (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL) {
+
+		scb_index = ahc->qoutfifo[ahc->qoutfifonext];
+		if ((ahc->qoutfifonext & 0x03) == 0x03) {
+			u_int modnext;
+
+			/*
+			 * Clear 32bits of QOUTFIFO at a time
+			 * so that we don't clobber an incoming
+			 * byte DMA to the array on architectures
+			 * that only support 32bit load and store
+			 * operations.
+			 */
+			modnext = ahc->qoutfifonext & ~0x3;
+			*((uint32_t *)(&ahc->qoutfifo[modnext])) = 0xFFFFFFFFUL;
+			ahc_dmamap_sync(ahc, ahc->parent_dmat /*shared_data_dmat*/,
+					ahc->shared_data_dmamap,
+					/*offset*/modnext, /*len*/4,
+					BUS_DMASYNC_PREREAD);
+		}
+		ahc->qoutfifonext++;
+
+		scb = ahc_lookup_scb(ahc, scb_index);
+		if (scb == NULL) {
+			printf("%s: WARNING no command for scb %d "
+			       "(cmdcmplt)\nQOUTPOS = %d\n",
+			       ahc_name(ahc), scb_index,
+			       (ahc->qoutfifonext - 1) & 0xFF);
+			continue;
+		}
+
+		/*
+		 * Save off the residual
+		 * if there is one.
+		 */
+		ahc_update_residual(ahc, scb);
+		ahc_done(ahc, scb);
+	}
+}
+
+void
+ahc_run_untagged_queues(struct ahc_softc *ahc)
+{
+	int i;
+
+	for (i = 0; i < 16; i++)
+		ahc_run_untagged_queue(ahc, &ahc->untagged_queues[i]);
+}
+
+void
+ahc_run_untagged_queue(struct ahc_softc *ahc, struct scb_tailq *queue)
+{
+	struct scb *scb;
+
+	if (ahc->untagged_queue_lock != 0)
+		return;
+
+	if ((scb = TAILQ_FIRST(queue)) != NULL
+	    && (scb->flags & SCB_ACTIVE) == 0) {
+		scb->flags |= SCB_ACTIVE;
+		ahc_queue_scb(ahc, scb);
+	}
+}
+
+/************************* Interrupt Handling *********************************/
+void
+ahc_handle_brkadrint(struct ahc_softc *ahc)
+{
+	/*
+	 * We upset the sequencer :-(
+	 * Lookup the error message
+	 */
+	int i;
+	int error;
+
+	error = ahc_inb(ahc, ERROR);
+	for (i = 0; error != 1 && i < num_errors; i++)
+		error >>= 1;
+	printf("%s: brkadrint, %s at seqaddr = 0x%x\n",
+	       ahc_name(ahc), ahc_hard_errors[i].errmesg,
+	       ahc_inb(ahc, SEQADDR0) |
+	       (ahc_inb(ahc, SEQADDR1) << 8));
+
+	ahc_dump_card_state(ahc);
+
+	/* Tell everyone that this HBA is no longer available */
+	ahc_abort_scbs(ahc, CAM_TARGET_WILDCARD, ALL_CHANNELS,
+		       CAM_LUN_WILDCARD, SCB_LIST_NULL, ROLE_UNKNOWN,
+		       CAM_NO_HBA);
+
+	/* Disable all interrupt sources by resetting the controller */
+	ahc_shutdown(ahc);
+}
+
+void
+ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat)
+{
+	struct scb *scb;
+	struct ahc_devinfo devinfo;
+	
+	ahc_fetch_devinfo(ahc, &devinfo);
+
+	/*
+	 * Clear the upper byte that holds SEQINT status
+	 * codes and clear the SEQINT bit. We will unpause
+	 * the sequencer, if appropriate, after servicing
+	 * the request.
+	 */
+	ahc_outb(ahc, CLRINT, CLRSEQINT);
+	switch (intstat & SEQINT_MASK) {
+	case BAD_STATUS:
+	{
+		u_int  scb_index;
+		struct hardware_scb *hscb;
+
+		/*
+		 * Set the default return value to 0 (don't
+		 * send sense).  The sense code will change
+		 * this if needed.
+		 */
+		ahc_outb(ahc, RETURN_1, 0);
+
+		/*
+		 * The sequencer will notify us when a command
+		 * has an error that would be of interest to
+		 * the kernel.  This allows us to leave the sequencer
+		 * running in the common case of command completes
+		 * without error.  The sequencer will already have
+		 * DMA'd the SCB back up to us, so we can reference
+		 * the in kernel copy directly.
+		 */
+		scb_index = ahc_inb(ahc, SCB_TAG);
+		scb = ahc_lookup_scb(ahc, scb_index);
+		if (scb == NULL) {
+			ahc_print_devinfo(ahc, &devinfo);
+			printf("ahc_intr - referenced scb "
+			       "not valid during seqint 0x%x scb(%d)\n",
+			       intstat, scb_index);
+			ahc_dump_card_state(ahc);
+			panic("for safety");
+			goto unpause;
+		}
+
+		hscb = scb->hscb; 
+
+		/* Don't want to clobber the original sense code */
+		if ((scb->flags & SCB_SENSE) != 0) {
+			/*
+			 * Clear the SCB_SENSE Flag and have
+			 * the sequencer do a normal command
+			 * complete.
+			 */
+			scb->flags &= ~SCB_SENSE;
+			break;
+		}
+		/* Freeze the queue until the client sees the error. */
+		ahc_freeze_devq(ahc, scb);
+		ahc_freeze_scb(scb);
+		ahc_set_scsi_status(scb, hscb->shared_data.status.scsi_status);
+		switch (hscb->shared_data.status.scsi_status) {
+		case SCSI_STATUS_OK:
+			printf("%s: Interrupted for status of 0 (?)\n",
+			       ahc_name(ahc));
+			break;
+		case SCSI_STATUS_CMD_TERMINATED:
+		case SCSI_STATUS_CHECK_COND:
+		{
+			struct ahc_dma_seg *sg;
+			struct scsi_sense *sc;
+			struct ahc_initiator_tinfo *targ_info;
+			struct ahc_tmode_tstate *tstate;
+			struct ahc_transinfo *tinfo;
+#ifdef AHC_DEBUG
+			if (ahc_debug & AHC_SHOW_SENSE) {
+				ahc_print_path(ahc, scb);
+				printf("SCB %d: requests Check Status\n",
+				       scb->hscb->tag);
+			}
+#endif
+
+			if (ahc_perform_autosense(scb) == 0)
+				break;
+
+			targ_info = ahc_fetch_transinfo(ahc,
+							devinfo.channel,
+							devinfo.our_scsiid,
+							devinfo.target,
+							&tstate);
+			tinfo = &targ_info->curr;
+			sg = scb->sg_list;
+			sc = (struct scsi_sense *)(&hscb->shared_data.cdb); 
+			/*
+			 * Save off the residual if there is one.
+			 */
+			ahc_update_residual(ahc, scb);
+#ifdef AHC_DEBUG
+			if (ahc_debug & AHC_SHOW_SENSE) {
+				ahc_print_path(ahc, scb);
+				printf("Sending Sense\n");
+			}
+#endif
+			sg->addr = ahc_get_sense_bufaddr(ahc, scb);
+			sg->len = ahc_get_sense_bufsize(ahc, scb);
+			sg->len |= AHC_DMA_LAST_SEG;
+
+			/* Fixup byte order */
+			sg->addr = ahc_htole32(sg->addr);
+			sg->len = ahc_htole32(sg->len);
+
+			sc->opcode = REQUEST_SENSE;
+			sc->byte2 = 0;
+			if (tinfo->protocol_version <= SCSI_REV_2
+			    && SCB_GET_LUN(scb) < 8)
+				sc->byte2 = SCB_GET_LUN(scb) << 5;
+			sc->unused[0] = 0;
+			sc->unused[1] = 0;
+			sc->length = sg->len;
+			sc->control = 0;
+
+			/*
+			 * We can't allow the target to disconnect.
+			 * This will be an untagged transaction and
+			 * having the target disconnect will make this
+			 * transaction indistinguishable from outstanding
+			 * tagged transactions.
+			 */
+			hscb->control = 0;
+
+			/*
+			 * This request sense could be because the
+			 * the device lost power or in some other
+			 * way has lost our transfer negotiations.
+			 * Renegotiate if appropriate.  Unit attention
+			 * errors will be reported before any data
+			 * phases occur.
+			 */
+			if (ahc_get_residual(scb) 
+			    == ahc_get_transfer_length(scb)) {
+				ahc_update_neg_request(ahc, &devinfo,
+						       tstate, targ_info,
+						       AHC_NEG_IF_NON_ASYNC);
+			}
+			if (tstate->auto_negotiate & devinfo.target_mask) {
+				hscb->control |= MK_MESSAGE;
+				scb->flags &= ~SCB_NEGOTIATE;
+				scb->flags |= SCB_AUTO_NEGOTIATE;
+			}
+			hscb->cdb_len = sizeof(*sc);
+			hscb->dataptr = sg->addr; 
+			hscb->datacnt = sg->len;
+			hscb->sgptr = scb->sg_list_phys | SG_FULL_RESID;
+			hscb->sgptr = ahc_htole32(hscb->sgptr);
+#ifdef __OpenBSD__
+			bus_dmamap_sync(ahc->parent_dmat,
+			    ahc->scb_data->sense_dmamap,
+			    (scb - ahc->scb_data->scbarray) *
+			    sizeof(struct scsi_sense_data),
+			    sizeof(struct scsi_sense_data),
+			    BUS_DMASYNC_PREREAD);
+			bus_dmamap_sync(ahc->parent_dmat,
+			    scb->sg_map->sg_dmamap,
+			    0, scb->sg_map->sg_dmamap->dm_mapsize,
+			    BUS_DMASYNC_PREWRITE);
+			bus_dmamap_sync(ahc->parent_dmat,
+			    ahc->scb_data->hscb_dmamap,
+			    0, ahc->scb_data->hscb_dmamap->dm_mapsize,
+			    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+#endif
+			scb->sg_count = 1;
+			scb->flags |= SCB_SENSE;
+			ahc_qinfifo_requeue_tail(ahc, scb);
+			ahc_outb(ahc, RETURN_1, SEND_SENSE);
+			/*
+			 * Ensure we have enough time to actually
+			 * retrieve the sense.
+			 */
+			ahc_scb_timer_reset(scb, 5 * 1000000);
+			break;
+		}
+		default:
+			break;
+		}
+		break;
+	}
+	case NO_MATCH:
+	{
+		/* Ensure we don't leave the selection hardware on */
+		ahc_outb(ahc, SCSISEQ,
+			 ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP));
+
+		printf("%s:%c:%d: no active SCB for reconnecting "
+		       "target - issuing BUS DEVICE RESET\n",
+		       ahc_name(ahc), devinfo.channel, devinfo.target);
+		printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
+		       "ARG_1 == 0x%x ACCUM = 0x%x\n",
+		       ahc_inb(ahc, SAVED_SCSIID), ahc_inb(ahc, SAVED_LUN),
+		       ahc_inb(ahc, ARG_1), ahc_inb(ahc, ACCUM));
+		printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
+		       "SINDEX == 0x%x\n",
+		       ahc_inb(ahc, SEQ_FLAGS), ahc_inb(ahc, SCBPTR),
+		       ahc_index_busy_tcl(ahc,
+			    BUILD_TCL(ahc_inb(ahc, SAVED_SCSIID),
+				      ahc_inb(ahc, SAVED_LUN))),
+		       ahc_inb(ahc, SINDEX));
+		printf("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
+		       "SCB_TAG == 0x%x, SCB_CONTROL == 0x%x\n",
+		       ahc_inb(ahc, SCSIID), ahc_inb(ahc, SCB_SCSIID),
+		       ahc_inb(ahc, SCB_LUN), ahc_inb(ahc, SCB_TAG),
+		       ahc_inb(ahc, SCB_CONTROL));
+		printf("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n",
+		       ahc_inb(ahc, SCSIBUSL), ahc_inb(ahc, SCSISIGI));
+		printf("SXFRCTL0 == 0x%x\n", ahc_inb(ahc, SXFRCTL0));
+		printf("SEQCTL == 0x%x\n", ahc_inb(ahc, SEQCTL));
+		ahc_dump_card_state(ahc);
+		ahc->msgout_buf[0] = MSG_BUS_DEV_RESET;
+		ahc->msgout_len = 1;
+		ahc->msgout_index = 0;
+		ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
+		ahc_outb(ahc, MSG_OUT, HOST_MSG);
+		ahc_assert_atn(ahc);
+		break;
+	}
+	case SEND_REJECT: 
+	{
+		u_int rejbyte = ahc_inb(ahc, ACCUM);
+		printf("%s:%c:%d: Warning - unknown message received from "
+		       "target (0x%x).  Rejecting\n", 
+		       ahc_name(ahc), devinfo.channel, devinfo.target, rejbyte);
+		break; 
+	}
+	case PROTO_VIOLATION:
+	{
+		ahc_handle_proto_violation(ahc);
+		break;
+	}
+	case IGN_WIDE_RES:
+		ahc_handle_ign_wide_residue(ahc, &devinfo);
+		break;
+	case PDATA_REINIT:
+		ahc_reinitialize_dataptrs(ahc);
+		break;
+	case BAD_PHASE:
+	{
+		u_int lastphase;
+
+		lastphase = ahc_inb(ahc, LASTPHASE);
+		printf("%s:%c:%d: unknown scsi bus phase %x, "
+		       "lastphase = 0x%x.  Attempting to continue\n",
+		       ahc_name(ahc), devinfo.channel, devinfo.target,
+		       lastphase, ahc_inb(ahc, SCSISIGI));
+		break;
+	}
+	case MISSED_BUSFREE:
+	{
+		u_int lastphase;
+
+		lastphase = ahc_inb(ahc, LASTPHASE);
+		printf("%s:%c:%d: Missed busfree. "
+		       "Lastphase = 0x%x, Curphase = 0x%x\n",
+		       ahc_name(ahc), devinfo.channel, devinfo.target,
+		       lastphase, ahc_inb(ahc, SCSISIGI));
+		ahc_restart(ahc);
+		return;
+	}
+	case HOST_MSG_LOOP:
+	{
+		/*
+		 * The sequencer has encountered a message phase
+		 * that requires host assistance for completion.
+		 * While handling the message phase(s), we will be
+		 * notified by the sequencer after each byte is
+		 * transferred so we can track bus phase changes.
+		 *
+		 * If this is the first time we've seen a HOST_MSG_LOOP
+		 * interrupt, initialize the state of the host message
+		 * loop.
+		 */
+		if (ahc->msg_type == MSG_TYPE_NONE) {
+			struct scb *scb;
+			u_int scb_index;
+			u_int bus_phase;
+
+			bus_phase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
+			if (bus_phase != P_MESGIN
+			 && bus_phase != P_MESGOUT) {
+				printf("ahc_intr: HOST_MSG_LOOP bad "
+				       "phase 0x%x\n",
+				      bus_phase);
+				/*
+				 * Probably transitioned to bus free before
+				 * we got here.  Just punt the message.
+				 */
+				ahc_clear_intstat(ahc);
+				ahc_restart(ahc);
+				return;
+			}
+
+			scb_index = ahc_inb(ahc, SCB_TAG);
+			scb = ahc_lookup_scb(ahc, scb_index);
+			if (devinfo.role == ROLE_INITIATOR) {
+				if (scb == NULL)
+					panic("HOST_MSG_LOOP with "
+					      "invalid SCB %x\n", scb_index);
+
+				if (bus_phase == P_MESGOUT)
+					ahc_setup_initiator_msgout(ahc,
+								   &devinfo,
+								   scb);
+				else {
+					ahc->msg_type =
+					    MSG_TYPE_INITIATOR_MSGIN;
+					ahc->msgin_index = 0;
+				}
+			}
+#if AHC_TARGET_MODE
+			else {
+				if (bus_phase == P_MESGOUT) {
+					ahc->msg_type =
+					    MSG_TYPE_TARGET_MSGOUT;
+					ahc->msgin_index = 0;
+				}
+				else 
+					ahc_setup_target_msgin(ahc,
+							       &devinfo,
+							       scb);
+			}
+#endif
+		}
+
+		ahc_handle_message_phase(ahc);
+		break;
+	}
+	case PERR_DETECTED:
+	{
+		/*
+		 * If we've cleared the parity error interrupt
+		 * but the sequencer still believes that SCSIPERR
+		 * is true, it must be that the parity error is
+		 * for the currently presented byte on the bus,
+		 * and we are not in a phase (data-in) where we will
+		 * eventually ack this byte.  Ack the byte and
+		 * throw it away in the hope that the target will
+		 * take us to message out to deliver the appropriate
+		 * error message.
+		 */
+		if ((intstat & SCSIINT) == 0
+		 && (ahc_inb(ahc, SSTAT1) & SCSIPERR) != 0) {
+
+			if ((ahc->features & AHC_DT) == 0) {
+				u_int curphase;
+
+				/*
+				 * The hardware will only let you ack bytes
+				 * if the expected phase in SCSISIGO matches
+				 * the current phase.  Make sure this is
+				 * currently the case.
+				 */
+				curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
+				ahc_outb(ahc, LASTPHASE, curphase);
+				ahc_outb(ahc, SCSISIGO, curphase);
+			}
+			if ((ahc_inb(ahc, SCSISIGI) & (CDI|MSGI)) == 0) {
+				int wait;
+
+				/*
+				 * In a data phase.  Faster to bitbucket
+				 * the data than to individually ack each
+				 * byte.  This is also the only strategy
+				 * that will work with AUTOACK enabled.
+				 */
+				ahc_outb(ahc, SXFRCTL1,
+					 ahc_inb(ahc, SXFRCTL1) | BITBUCKET);
+				wait = 5000;
+				while (--wait != 0) {
+					if ((ahc_inb(ahc, SCSISIGI)
+					  & (CDI|MSGI)) != 0)
+						break;
+					ahc_delay(100);
+				}
+				ahc_outb(ahc, SXFRCTL1,
+					 ahc_inb(ahc, SXFRCTL1) & ~BITBUCKET);
+				if (wait == 0) {
+					struct	scb *scb;
+					u_int	scb_index;
+
+					ahc_print_devinfo(ahc, &devinfo);
+					printf("Unable to clear parity error.  "
+					       "Resetting bus.\n");
+					scb_index = ahc_inb(ahc, SCB_TAG);
+					scb = ahc_lookup_scb(ahc, scb_index);
+					if (scb != NULL)
+						ahc_set_transaction_status(scb,
+						    CAM_UNCOR_PARITY);
+					ahc_reset_channel(ahc, devinfo.channel, 
+							  /*init reset*/TRUE);
+				}
+			} else {
+				ahc_inb(ahc, SCSIDATL);
+			}
+		}
+		break;
+	}
+	case DATA_OVERRUN:
+	{
+		/*
+		 * When the sequencer detects an overrun, it
+		 * places the controller in "BITBUCKET" mode
+		 * and allows the target to complete its transfer.
+		 * Unfortunately, none of the counters get updated
+		 * when the controller is in this mode, so we have
+		 * no way of knowing how large the overrun was.
+		 */
+		u_int scbindex = ahc_inb(ahc, SCB_TAG);
+		u_int lastphase = ahc_inb(ahc, LASTPHASE);
+		u_int i;
+
+		scb = ahc_lookup_scb(ahc, scbindex);
+		for (i = 0; i < num_phases; i++) {
+			if (lastphase == ahc_phase_table[i].phase)
+				break;
+		}
+		ahc_print_path(ahc, scb);
+		printf("data overrun detected %s."
+		       "  Tag == 0x%x.\n",
+		       ahc_phase_table[i].phasemsg,
+  		       scb->hscb->tag);
+		ahc_print_path(ahc, scb);
+		printf("%s seen Data Phase.  Length = %ld.  NumSGs = %d.\n",
+		       ahc_inb(ahc, SEQ_FLAGS) & DPHASE ? "Have" : "Haven't",
+		       ahc_get_transfer_length(scb), scb->sg_count);
+		if (scb->sg_count > 0) {
+			for (i = 0; i < scb->sg_count; i++) {
+
+				printf("sg[%d] - Addr 0x%x%x : Length %d\n",
+				       i,
+				       (ahc_le32toh(scb->sg_list[i].len) >> 24
+				        & SG_HIGH_ADDR_BITS),
+				       ahc_le32toh(scb->sg_list[i].addr),
+				       ahc_le32toh(scb->sg_list[i].len)
+				       & AHC_SG_LEN_MASK);
+			}
+		}
+		/*
+		 * Set this and it will take effect when the
+		 * target does a command complete.
+		 */
+		ahc_freeze_devq(ahc, scb);
+		if ((scb->flags & SCB_SENSE) == 0) {
+			ahc_set_transaction_status(scb, CAM_DATA_RUN_ERR);
+		} else {
+			scb->flags &= ~SCB_SENSE;
+			ahc_set_transaction_status(scb, CAM_AUTOSENSE_FAIL);
+		}
+		ahc_freeze_scb(scb);
+
+		if ((ahc->features & AHC_ULTRA2) != 0) {
+			/*
+			 * Clear the channel in case we return
+			 * to data phase later.
+			 */
+			ahc_outb(ahc, SXFRCTL0,
+				 ahc_inb(ahc, SXFRCTL0) | CLRSTCNT|CLRCHN);
+			ahc_outb(ahc, SXFRCTL0,
+				 ahc_inb(ahc, SXFRCTL0) | CLRSTCNT|CLRCHN);
+		}
+		if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) {
+			u_int dscommand1;
+
+			/* Ensure HHADDR is 0 for future DMA operations. */
+			dscommand1 = ahc_inb(ahc, DSCOMMAND1);
+			ahc_outb(ahc, DSCOMMAND1, dscommand1 | HADDLDSEL0);
+			ahc_outb(ahc, HADDR, 0);
+			ahc_outb(ahc, DSCOMMAND1, dscommand1);
+		}
+		break;
+	}
+	case MKMSG_FAILED:
+	{
+		u_int scbindex;
+
+		printf("%s:%c:%d:%d: Attempt to issue message failed\n",
+		       ahc_name(ahc), devinfo.channel, devinfo.target,
+		       devinfo.lun);
+		scbindex = ahc_inb(ahc, SCB_TAG);
+		scb = ahc_lookup_scb(ahc, scbindex);
+		if (scb != NULL
+		 && (scb->flags & SCB_RECOVERY_SCB) != 0)
+			/*
+			 * Ensure that we didn't put a second instance of this
+			 * SCB into the QINFIFO.
+			 */
+			ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb),
+					   SCB_GET_CHANNEL(ahc, scb),
+					   SCB_GET_LUN(scb), scb->hscb->tag,
+					   ROLE_INITIATOR, /*status*/0,
+					   SEARCH_REMOVE);
+		break;
+	}
+	case NO_FREE_SCB:
+	{
+		printf("%s: No free or disconnected SCBs\n", ahc_name(ahc));
+		ahc_dump_card_state(ahc);
+		panic("for safety");
+		break;
+	}
+	case SCB_MISMATCH:
+	{
+		u_int scbptr;
+
+		scbptr = ahc_inb(ahc, SCBPTR);
+		printf("Bogus TAG after DMA.  SCBPTR %d, tag %d, our tag %d\n",
+		       scbptr, ahc_inb(ahc, ARG_1),
+		       ahc->scb_data->hscbs[scbptr].tag);
+		ahc_dump_card_state(ahc);
+		panic("for saftey");
+		break;
+	}
+	case OUT_OF_RANGE:
+	{
+		printf("%s: BTT calculation out of range\n", ahc_name(ahc));
+		printf("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
+		       "ARG_1 == 0x%x ACCUM = 0x%x\n",
+		       ahc_inb(ahc, SAVED_SCSIID), ahc_inb(ahc, SAVED_LUN),
+		       ahc_inb(ahc, ARG_1), ahc_inb(ahc, ACCUM));
+		printf("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
+		       "SINDEX == 0x%x\n, A == 0x%x\n",
+		       ahc_inb(ahc, SEQ_FLAGS), ahc_inb(ahc, SCBPTR),
+		       ahc_index_busy_tcl(ahc,
+			    BUILD_TCL(ahc_inb(ahc, SAVED_SCSIID),
+				      ahc_inb(ahc, SAVED_LUN))),
+		       ahc_inb(ahc, SINDEX),
+		       ahc_inb(ahc, ACCUM));
+		printf("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
+		       "SCB_TAG == 0x%x, SCB_CONTROL == 0x%x\n",
+		       ahc_inb(ahc, SCSIID), ahc_inb(ahc, SCB_SCSIID),
+		       ahc_inb(ahc, SCB_LUN), ahc_inb(ahc, SCB_TAG),
+		       ahc_inb(ahc, SCB_CONTROL));
+		printf("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n",
+		       ahc_inb(ahc, SCSIBUSL), ahc_inb(ahc, SCSISIGI));
+		ahc_dump_card_state(ahc);
+		panic("for safety");
+		break;
+	}
+	default:
+		printf("ahc_intr: seqint, "
+		       "intstat == 0x%x, scsisigi = 0x%x\n",
+		       intstat, ahc_inb(ahc, SCSISIGI));
+		break;
+	}
+unpause:
+	/*
+	 *  The sequencer is paused immediately on
+	 *  a SEQINT, so we should restart it when
+	 *  we're done.
+	 */
+	ahc_unpause(ahc);
+}
+
+void
+ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
+{
+	u_int	scb_index;
+	u_int	status0;
+	u_int	status;
+	struct	scb *scb;
+	char	cur_channel;
+	char	intr_channel;
+
+	if ((ahc->features & AHC_TWIN) != 0
+	    && ((ahc_inb(ahc, SBLKCTL) & SELBUSB) != 0))
+		cur_channel = 'B';
+	else
+		cur_channel = 'A';
+	intr_channel = cur_channel;
+
+	if ((ahc->features & AHC_ULTRA2) != 0)
+		status0 = ahc_inb(ahc, SSTAT0) & IOERR;
+	else
+		status0 = 0;
+	status = ahc_inb(ahc, SSTAT1) & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR);
+	if (status == 0 && status0 == 0) {
+		if ((ahc->features & AHC_TWIN) != 0) {
+			/* Try the other channel */
+		 	ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) ^ SELBUSB);
+			status = ahc_inb(ahc, SSTAT1)
+			       & (SELTO|SCSIRSTI|BUSFREE|SCSIPERR);
+			intr_channel = (cur_channel == 'A') ? 'B' : 'A';
+		}
+		if (status == 0) {
+			printf("%s: Spurious SCSI interrupt\n", ahc_name(ahc));
+			ahc_outb(ahc, CLRINT, CLRSCSIINT);
+			ahc_unpause(ahc);
+			return;
+		}
+	}
+
+	/* Make sure the sequencer is in a safe location. */
+	ahc_clear_critical_section(ahc);
+
+	scb_index = ahc_inb(ahc, SCB_TAG);
+	scb = ahc_lookup_scb(ahc, scb_index);
+	if (scb != NULL
+	 && (ahc_inb(ahc, SEQ_FLAGS) & NOT_IDENTIFIED) != 0)
+		scb = NULL;
+
+	if ((ahc->features & AHC_ULTRA2) != 0
+	 && (status0 & IOERR) != 0) {
+		int now_lvd;
+
+		now_lvd = ahc_inb(ahc, SBLKCTL) & ENAB40;
+		printf("%s: Transceiver State Has Changed to %s mode\n",
+		       ahc_name(ahc), now_lvd ? "LVD" : "SE");
+		ahc_outb(ahc, CLRSINT0, CLRIOERR);
+		/*
+		 * When transitioning to SE mode, the reset line
+		 * glitches, triggering an arbitration bug in some
+		 * Ultra2 controllers.  This bug is cleared when we
+		 * assert the reset line.  Since a reset glitch has
+		 * already occurred with this transition and a
+		 * transceiver state change is handled just like
+		 * a bus reset anyway, asserting the reset line
+		 * ourselves is safe.
+		 */
+		ahc_reset_channel(ahc, intr_channel,
+				 /*Initiate Reset*/now_lvd == 0);
+	} else if ((status & SCSIRSTI) != 0) {
+		printf("%s: Someone reset channel %c\n",
+			ahc_name(ahc), intr_channel);
+		if (intr_channel != cur_channel)
+		 	ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) ^ SELBUSB);
+		ahc_reset_channel(ahc, intr_channel, /*Initiate Reset*/FALSE);
+	} else if ((status & SCSIPERR) != 0) {
+		/*
+		 * Determine the bus phase and queue an appropriate message.
+		 * SCSIPERR is latched true as soon as a parity error
+		 * occurs.  If the sequencer acked the transfer that
+		 * caused the parity error and the currently presented
+		 * transfer on the bus has correct parity, SCSIPERR will
+		 * be cleared by CLRSCSIPERR.  Use this to determine if
+		 * we should look at the last phase the sequencer recorded,
+		 * or the current phase presented on the bus.
+		 */
+		u_int mesg_out;
+		u_int curphase;
+		u_int errorphase;
+		u_int lastphase;
+		u_int scsirate;
+		u_int i;
+		u_int sstat2;
+		int   silent;
+
+		lastphase = ahc_inb(ahc, LASTPHASE);
+		curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
+		sstat2 = ahc_inb(ahc, SSTAT2);
+		ahc_outb(ahc, CLRSINT1, CLRSCSIPERR);
+		/*
+		 * For all phases save DATA, the sequencer won't
+		 * automatically ack a byte that has a parity error
+		 * in it.  So the only way that the current phase
+		 * could be 'data-in' is if the parity error is for
+		 * an already acked byte in the data phase.  During
+		 * synchronous data-in transfers, we may actually
+		 * ack bytes before latching the current phase in
+		 * LASTPHASE, leading to the discrepancy between
+		 * curphase and lastphase.
+		 */
+		if ((ahc_inb(ahc, SSTAT1) & SCSIPERR) != 0
+		 || curphase == P_DATAIN || curphase == P_DATAIN_DT)
+			errorphase = curphase;
+		else
+			errorphase = lastphase;
+
+		for (i = 0; i < num_phases; i++) {
+			if (errorphase == ahc_phase_table[i].phase)
+				break;
+		}
+		mesg_out = ahc_phase_table[i].mesg_out;
+		silent = FALSE;
+		if (scb != NULL) {
+			if (SCB_IS_SILENT(scb))
+				silent = TRUE;
+			else
+				ahc_print_path(ahc, scb);
+			scb->flags |= SCB_TRANSMISSION_ERROR;
+		} else
+			printf("%s:%c:%d: ", ahc_name(ahc), intr_channel,
+			       SCSIID_TARGET(ahc, ahc_inb(ahc, SAVED_SCSIID)));
+		scsirate = ahc_inb(ahc, SCSIRATE);
+		if (silent == FALSE) {
+			printf("parity error detected %s. "
+			       "SEQADDR(0x%x) SCSIRATE(0x%x)\n",
+			       ahc_phase_table[i].phasemsg,
+			       ahc_inw(ahc, SEQADDR0),
+			       scsirate);
+			if ((ahc->features & AHC_DT) != 0) {
+				if ((sstat2 & CRCVALERR) != 0)
+					printf("\tCRC Value Mismatch\n");
+				if ((sstat2 & CRCENDERR) != 0)
+					printf("\tNo terminal CRC packet "
+					       "recevied\n");
+				if ((sstat2 & CRCREQERR) != 0)
+					printf("\tIllegal CRC packet "
+					       "request\n");
+				if ((sstat2 & DUAL_EDGE_ERR) != 0)
+					printf("\tUnexpected %sDT Data Phase\n",
+					       (scsirate & SINGLE_EDGE)
+					     ? "" : "non-");
+			}
+		}
+
+		if ((ahc->features & AHC_DT) != 0
+		 && (sstat2 & DUAL_EDGE_ERR) != 0) {
+			/*
+			 * This error applies regardless of
+			 * data direction, so ignore the value
+			 * in the phase table.
+			 */
+			mesg_out = MSG_INITIATOR_DET_ERR;
+		}
+
+		/*
+		 * We've set the hardware to assert ATN if we   
+		 * get a parity error on "in" phases, so all we  
+		 * need to do is stuff the message buffer with
+		 * the appropriate message.  "In" phases have set
+		 * mesg_out to something other than MSG_NOP.
+		 */
+		if (mesg_out != MSG_NOOP) {
+			if (ahc->msg_type != MSG_TYPE_NONE)
+				ahc->send_msg_perror = TRUE;
+			else
+				ahc_outb(ahc, MSG_OUT, mesg_out);
+		}
+		/*
+		 * Force a renegotiation with this target just in
+		 * case we are out of sync for some external reason
+		 * unknown (or unreported) by the target.
+		 */
+		ahc_force_renegotiation(ahc);
+		ahc_outb(ahc, CLRINT, CLRSCSIINT);
+		ahc_unpause(ahc);
+	} else if ((status & SELTO) != 0) {
+		u_int	scbptr;
+
+		/* Stop the selection */
+		ahc_outb(ahc, SCSISEQ, 0);
+
+		/* No more pending messages */
+		ahc_clear_msg_state(ahc);
+
+		/* Clear interrupt state */
+		ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENBUSFREE);
+		ahc_outb(ahc, CLRSINT1, CLRSELTIMEO|CLRBUSFREE|CLRSCSIPERR);
+
+		/*
+		 * Although the driver does not care about the
+		 * 'Selection in Progress' status bit, the busy
+		 * LED does.  SELINGO is only cleared by a sucessfull
+		 * selection, so we must manually clear it to insure
+		 * the LED turns off just incase no future successful
+		 * selections occur (e.g. no devices on the bus).
+		 */
+		ahc_outb(ahc, CLRSINT0, CLRSELINGO);
+
+		scbptr = ahc_inb(ahc, WAITING_SCBH);
+		ahc_outb(ahc, SCBPTR, scbptr);
+		scb_index = ahc_inb(ahc, SCB_TAG);
+
+		scb = ahc_lookup_scb(ahc, scb_index);
+		if (scb == NULL) {
+			printf("%s: ahc_intr - referenced scb not "
+			       "valid during SELTO scb(%d, %d)\n",
+			       ahc_name(ahc), scbptr, scb_index);
+			ahc_dump_card_state(ahc);
+		} else {
+#ifdef AHC_DEBUG
+			if ((ahc_debug & AHC_SHOW_SELTO) != 0) {
+				ahc_print_path(ahc, scb);
+				printf("Saw Selection Timeout for SCB 0x%x\n",
+				       scb_index);
+			}
+#endif
+			/*
+			 * Force a renegotiation with this target just in
+			 * case the cable was pulled and will later be
+			 * re-attached.  The target may forget its negotiation
+			 * settings with us should it attempt to reselect
+			 * during the interruption.  The target will not issue
+			 * a unit attention in this case, so we must always
+			 * renegotiate.
+			 */
+			ahc_force_renegotiation(ahc);
+			ahc_set_transaction_status(scb, CAM_SEL_TIMEOUT);
+			ahc_freeze_devq(ahc, scb);
+		}
+		ahc_outb(ahc, CLRINT, CLRSCSIINT);
+		ahc_restart(ahc);
+	} else if ((status & BUSFREE) != 0
+		&& (ahc_inb(ahc, SIMODE1) & ENBUSFREE) != 0) {
+		u_int lastphase;
+		u_int saved_scsiid;
+		u_int saved_lun;
+		u_int target;
+		u_int initiator_role_id;
+		char channel;
+		int printerror;
+
+		/*
+		 * Clear our selection hardware as soon as possible.
+		 * We may have an entry in the waiting Q for this target,
+		 * that is affected by this busfree and we don't want to
+		 * go about selecting the target while we handle the event.
+		 */
+		ahc_outb(ahc, SCSISEQ,
+			 ahc_inb(ahc, SCSISEQ) & (ENSELI|ENRSELI|ENAUTOATNP));
+
+		/*
+		 * Disable busfree interrupts and clear the busfree
+		 * interrupt status.  We do this here so that several
+		 * bus transactions occur prior to clearing the SCSIINT
+		 * latch.  It can take a bit for the clearing to take effect.
+		 */
+		ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENBUSFREE);
+		ahc_outb(ahc, CLRSINT1, CLRBUSFREE|CLRSCSIPERR);
+
+		/*
+		 * Look at what phase we were last in.
+		 * If its message out, chances are pretty good
+		 * that the busfree was in response to one of
+		 * our abort requests.
+		 */
+		lastphase = ahc_inb(ahc, LASTPHASE);
+		saved_scsiid = ahc_inb(ahc, SAVED_SCSIID);
+		saved_lun = ahc_inb(ahc, SAVED_LUN);
+		target = SCSIID_TARGET(ahc, saved_scsiid);
+		initiator_role_id = SCSIID_OUR_ID(saved_scsiid);
+		channel = SCSIID_CHANNEL(ahc, saved_scsiid);
+		printerror = 1;
+
+		if (lastphase == P_MESGOUT) {
+			struct ahc_devinfo devinfo;
+			u_int tag;
+
+			ahc_fetch_devinfo(ahc, &devinfo);
+			tag = SCB_LIST_NULL;
+			if (ahc_sent_msg(ahc, AHCMSG_1B, MSG_ABORT_TAG, TRUE)
+			    || ahc_sent_msg(ahc, AHCMSG_1B, MSG_ABORT, TRUE)) {
+				if (ahc->msgout_buf[ahc->msgout_index - 1]
+				    == MSG_ABORT_TAG)
+				tag = scb->hscb->tag;
+				ahc_print_path(ahc, scb);
+				printf("SCB %d - Abort%s Completed.\n",
+				       scb->hscb->tag, tag == SCB_LIST_NULL ?
+				       "" : " Tag");
+				ahc_abort_scbs(ahc, target, channel,
+					       saved_lun, tag,
+					       ROLE_INITIATOR,
+					       CAM_REQ_ABORTED);
+				printerror = 0;
+			} else if (ahc_sent_msg(ahc, AHCMSG_1B,
+						MSG_BUS_DEV_RESET, TRUE)) {
+#ifdef __FreeBSD__
+				/*
+				 * Don't mark the user's request for this BDR
+				 * as completing with CAM_BDR_SENT.  CAM3
+				 * specifies CAM_REQ_CMP.
+				 */
+				if (scb != NULL
+				 && scb->io_ctx->ccb_h.func_code== XPT_RESET_DEV
+				 && ahc_match_scb(ahc, scb, target, channel,
+						  CAM_LUN_WILDCARD,
+						  SCB_LIST_NULL,
+						  ROLE_INITIATOR)) {
+					ahc_set_transaction_status(scb, CAM_REQ_CMP);
+				}
+#endif
+				ahc_compile_devinfo(&devinfo,
+						    initiator_role_id,
+						    target,
+						    CAM_LUN_WILDCARD,
+						    channel,
+						    ROLE_INITIATOR);
+				ahc_handle_devreset(ahc, &devinfo,
+						    CAM_BDR_SENT,
+						    "Bus Device Reset",
+						    /*verbose_level*/0);
+				printerror = 0;
+			} else if (ahc_sent_msg(ahc, AHCMSG_EXT,
+						MSG_EXT_PPR, FALSE)) {
+				struct ahc_initiator_tinfo *tinfo;
+				struct ahc_tmode_tstate *tstate;
+
+				/*
+				 * PPR Rejected.  Try non-ppr negotiation
+				 * and retry command.
+				 */
+				tinfo = ahc_fetch_transinfo(ahc,
+							    devinfo.channel,
+							    devinfo.our_scsiid,
+							    devinfo.target,
+							    &tstate);
+				tinfo->curr.transport_version = 2;
+				tinfo->goal.transport_version = 2;
+				tinfo->goal.ppr_options = 0;
+				ahc_qinfifo_requeue_tail(ahc, scb);
+				printerror = 0;
+			} else if (ahc_sent_msg(ahc, AHCMSG_EXT,
+						MSG_EXT_WDTR, FALSE)
+				|| ahc_sent_msg(ahc, AHCMSG_EXT,
+						MSG_EXT_SDTR, FALSE)) {
+				/*
+				 * Negotiation Rejected.  Go-async and
+				 * retry command.
+				 */
+				ahc_set_width(ahc, &devinfo,
+					      MSG_EXT_WDTR_BUS_8_BIT,
+					      AHC_TRANS_CUR|AHC_TRANS_GOAL,
+					      /*paused*/TRUE);
+				ahc_set_syncrate(ahc, &devinfo,
+						/*syncrate*/NULL,
+						/*period*/0, /*offset*/0,
+						/*ppr_options*/0,
+						AHC_TRANS_CUR|AHC_TRANS_GOAL,
+						/*paused*/TRUE);
+				ahc_qinfifo_requeue_tail(ahc, scb);
+				printerror = 0;
+			}
+		}
+		if (printerror != 0) {
+			u_int i;
+
+			if (scb != NULL) {
+				u_int tag;
+
+				if ((scb->hscb->control & TAG_ENB) != 0)
+					tag = scb->hscb->tag;
+				else
+					tag = SCB_LIST_NULL;
+				ahc_print_path(ahc, scb);
+				ahc_abort_scbs(ahc, target, channel,
+					       SCB_GET_LUN(scb), tag,
+					       ROLE_INITIATOR,
+					       CAM_UNEXP_BUSFREE);
+			} else {
+				/*
+				 * We had not fully identified this connection,
+				 * so we cannot abort anything.
+				 */
+				printf("%s: ", ahc_name(ahc));
+			}
+			for (i = 0; i < num_phases; i++) {
+				if (lastphase == ahc_phase_table[i].phase)
+					break;
+			}
+			/*
+			 * Renegotiate with this device at the
+			 * next opportunity just in case this busfree
+			 * is due to a negotiation mismatch with the
+			 * device.
+			 */
+			ahc_force_renegotiation(ahc);
+			printf("Unexpected busfree %s\n"
+			       "SEQADDR == 0x%x\n",
+			       ahc_phase_table[i].phasemsg,
+			       ahc_inb(ahc, SEQADDR0)
+				| (ahc_inb(ahc, SEQADDR1) << 8));
+		}
+		ahc_outb(ahc, CLRINT, CLRSCSIINT);
+		ahc_restart(ahc);
+	} else {
+		printf("%s: Missing case in ahc_handle_scsiint. status = %x\n",
+		       ahc_name(ahc), status);
+		ahc_outb(ahc, CLRINT, CLRSCSIINT);
+	}
+}
+
+/*
+ * Force renegotiation to occur the next time we initiate
+ * a command to the current device.
+ */
+void
+ahc_force_renegotiation(struct ahc_softc *ahc)
+{
+	struct	ahc_devinfo devinfo;
+	struct	ahc_initiator_tinfo *targ_info;
+	struct	ahc_tmode_tstate *tstate;
+
+	ahc_fetch_devinfo(ahc, &devinfo);
+	targ_info = ahc_fetch_transinfo(ahc,
+					devinfo.channel,
+					devinfo.our_scsiid,
+					devinfo.target,
+					&tstate);
+	ahc_update_neg_request(ahc, &devinfo, tstate,
+			       targ_info, AHC_NEG_IF_NON_ASYNC);
+}
+
+#define AHC_MAX_STEPS 2000
+void
+ahc_clear_critical_section(struct ahc_softc *ahc)
+{
+	int	stepping;
+	int	steps;
+	u_int	simode0;
+	u_int	simode1;
+
+	if (ahc->num_critical_sections == 0)
+		return;
+
+	stepping = FALSE;
+	steps = 0;
+	simode0 = 0;
+	simode1 = 0;
+	for (;;) {
+		struct	cs *cs;
+		u_int	seqaddr;
+		u_int	i;
+
+		seqaddr = ahc_inb(ahc, SEQADDR0)
+			| (ahc_inb(ahc, SEQADDR1) << 8);
+
+		/*
+		 * Seqaddr represents the next instruction to execute, 
+		 * so we are really executing the instruction just
+		 * before it.
+		 */
+		if (seqaddr != 0)
+			seqaddr -= 1;
+		cs = ahc->critical_sections;
+		for (i = 0; i < ahc->num_critical_sections; i++, cs++) {
+			
+			if (cs->begin < seqaddr && cs->end >= seqaddr)
+				break;
+		}
+
+		if (i == ahc->num_critical_sections)
+			break;
+
+		if (steps > AHC_MAX_STEPS) {
+			printf("%s: Infinite loop in critical section\n",
+			       ahc_name(ahc));
+			ahc_dump_card_state(ahc);
+			panic("critical section loop");
+		}
+
+		steps++;
+		if (stepping == FALSE) {
+
+			/*
+			 * Disable all interrupt sources so that the
+			 * sequencer will not be stuck by a pausing
+			 * interrupt condition while we attempt to
+			 * leave a critical section.
+			 */
+			simode0 = ahc_inb(ahc, SIMODE0);
+			ahc_outb(ahc, SIMODE0, 0);
+			simode1 = ahc_inb(ahc, SIMODE1);
+			if ((ahc->features & AHC_DT) != 0)
+				/*
+				 * On DT class controllers, we
+				 * use the enhanced busfree logic.
+				 * Unfortunately we cannot re-enable
+				 * busfree detection within the
+				 * current connection, so we must
+				 * leave it on while single stepping.
+				 */
+				ahc_outb(ahc, SIMODE1, ENBUSFREE);
+			else
+				ahc_outb(ahc, SIMODE1, 0);
+			ahc_outb(ahc, CLRINT, CLRSCSIINT);
+			ahc_outb(ahc, SEQCTL, ahc_inb(ahc, SEQCTL) | STEP);
+			stepping = TRUE;
+		}
+		if ((ahc->features & AHC_DT) != 0) {
+			ahc_outb(ahc, CLRSINT1, CLRBUSFREE);
+			ahc_outb(ahc, CLRINT, CLRSCSIINT);
+		}
+		ahc_outb(ahc, HCNTRL, ahc->unpause);
+		while (!ahc_is_paused(ahc))
+			ahc_delay(200);
+	}
+	if (stepping) {
+		ahc_outb(ahc, SIMODE0, simode0);
+		ahc_outb(ahc, SIMODE1, simode1);
+		ahc_outb(ahc, SEQCTL, ahc_inb(ahc, SEQCTL) & ~STEP);
+	}
+}
+
+/*
+ * Clear any pending interrupt status.
+ */
+void
+ahc_clear_intstat(struct ahc_softc *ahc)
+{
+	/* Clear any interrupt conditions this may have caused */
+	ahc_flush_device_writes(ahc);
+	ahc_outb(ahc, CLRSINT1, CLRSELTIMEO|CLRATNO|CLRSCSIRSTI
+				|CLRBUSFREE|CLRSCSIPERR|CLRPHASECHG|
+				CLRREQINIT);
+	ahc_flush_device_writes(ahc);
+	ahc_outb(ahc, CLRSINT0, CLRSELDO|CLRSELDI|CLRSELINGO);
+ 	ahc_flush_device_writes(ahc);
+	ahc_outb(ahc, CLRINT, CLRSCSIINT);
+	ahc_flush_device_writes(ahc);
+}
+
+/**************************** Debugging Routines ******************************/
+#ifdef AHC_DEBUG
+uint32_t ahc_debug = 0; /* AHC_SHOW_MISC|AHC_SHOW_SENSE|AHC_DEBUG_OPTS;*/
+#endif
+
+void
+ahc_print_scb(struct scb *scb)
+{
+	int i;
+
+	struct hardware_scb *hscb = scb->hscb;
+
+	printf("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n",
+	       (void *)scb,
+	       hscb->control,
+	       hscb->scsiid,
+	       hscb->lun,
+	       hscb->cdb_len);
+	printf("Shared Data: ");
+	for (i = 0; i < sizeof(hscb->shared_data.cdb); i++)
+		printf("%#02x", hscb->shared_data.cdb[i]);
+	printf("        dataptr:%#x datacnt:%#x sgptr:%#x tag:%#x\n",
+		ahc_le32toh(hscb->dataptr),
+		ahc_le32toh(hscb->datacnt),
+		ahc_le32toh(hscb->sgptr),
+		hscb->tag);
+	if (scb->sg_count > 0) {
+		for (i = 0; i < scb->sg_count; i++) {
+			printf("sg[%d] - Addr 0x%x%x : Length %d\n",
+			       i,
+			       (ahc_le32toh(scb->sg_list[i].len) >> 24
+			        & SG_HIGH_ADDR_BITS),
+			       ahc_le32toh(scb->sg_list[i].addr),
+			       ahc_le32toh(scb->sg_list[i].len));
+		}
+	}
+}
+
+/************************* Transfer Negotiation *******************************/
+/*
+ * Allocate per target mode instance (ID we respond to as a target)
+ * transfer negotiation data structures.
+ */
+static struct ahc_tmode_tstate *
+ahc_alloc_tstate(struct ahc_softc *ahc, u_int scsi_id, char channel)
+{
+	struct ahc_tmode_tstate *master_tstate;
+	struct ahc_tmode_tstate *tstate;
+	int i;
+
+	master_tstate = ahc->enabled_targets[ahc->our_id];
+	if (channel == 'B') {
+		scsi_id += 8;
+		master_tstate = ahc->enabled_targets[ahc->our_id_b + 8];
+	}
+	if (ahc->enabled_targets[scsi_id] != NULL
+	    && ahc->enabled_targets[scsi_id] != master_tstate)
+		panic("%s: ahc_alloc_tstate - Target already allocated",
+		      ahc_name(ahc));
+	tstate = (struct ahc_tmode_tstate*)malloc(sizeof(*tstate),
+						   M_DEVBUF, M_NOWAIT);
+	if (tstate == NULL)
+		return (NULL);
+
+	/*
+	 * If we have allocated a master tstate, copy user settings from
+	 * the master tstate (taken from SRAM or the EEPROM) for this
+	 * channel, but reset our current and goal settings to async/narrow
+	 * until an initiator talks to us.
+	 */
+	if (master_tstate != NULL) {
+		memcpy(tstate, master_tstate, sizeof(*tstate));
+		memset(tstate->enabled_luns, 0, sizeof(tstate->enabled_luns));
+		tstate->ultraenb = 0;
+		for (i = 0; i < AHC_NUM_TARGETS; i++) {
+			memset(&tstate->transinfo[i].curr, 0,
+			      sizeof(tstate->transinfo[i].curr));
+			memset(&tstate->transinfo[i].goal, 0,
+			      sizeof(tstate->transinfo[i].goal));
+		}
+	} else
+		memset(tstate, 0, sizeof(*tstate));
+	ahc->enabled_targets[scsi_id] = tstate;
+	return (tstate);
+}
+
+#ifdef AHC_TARGET_MODE
+/*
+ * Free per target mode instance (ID we respond to as a target)
+ * transfer negotiation data structures.
+ */
+static void
+ahc_free_tstate(struct ahc_softc *ahc, u_int scsi_id, char channel, int force)
+{
+	struct ahc_tmode_tstate *tstate;
+
+	/*
+	 * Don't clean up our "master" tstate.
+	 * It has our default user settings.
+	 */
+	if (((channel == 'B' && scsi_id == ahc->our_id_b)
+	  || (channel == 'A' && scsi_id == ahc->our_id))
+	 && force == FALSE)
+		return;
+
+	if (channel == 'B')
+		scsi_id += 8;
+	tstate = ahc->enabled_targets[scsi_id];
+	if (tstate != NULL)
+		free(tstate, M_DEVBUF);
+	ahc->enabled_targets[scsi_id] = NULL;
+}
+#endif
+
+/*
+ * Called when we have an active connection to a target on the bus,
+ * this function finds the nearest syncrate to the input period limited
+ * by the capabilities of the bus connectivity of and sync settings for
+ * the target.
+ */
+struct ahc_syncrate *
+ahc_devlimited_syncrate(struct ahc_softc *ahc,
+			struct ahc_initiator_tinfo *tinfo,
+			u_int *period, u_int *ppr_options, role_t role)
+{
+	struct	ahc_transinfo *transinfo;
+	u_int	maxsync;
+
+	if ((ahc->features & AHC_ULTRA2) != 0) {
+		if ((ahc_inb(ahc, SBLKCTL) & ENAB40) != 0
+		 && (ahc_inb(ahc, SSTAT2) & EXP_ACTIVE) == 0) {
+			maxsync = AHC_SYNCRATE_DT;
+		} else {
+			maxsync = AHC_SYNCRATE_ULTRA;
+			/* Can't do DT on an SE bus */
+			*ppr_options &= ~MSG_EXT_PPR_DT_REQ;
+		}
+	} else if ((ahc->features & AHC_ULTRA) != 0) {
+		maxsync = AHC_SYNCRATE_ULTRA;
+	} else {
+		maxsync = AHC_SYNCRATE_FAST;
+	}
+	/*
+	 * Never allow a value higher than our current goal
+	 * period otherwise we may allow a target initiated
+	 * negotiation to go above the limit as set by the
+	 * user.  In the case of an initiator initiated
+	 * sync negotiation, we limit based on the user
+	 * setting.  This allows the system to still accept
+	 * incoming negotiations even if target initiated
+	 * negotiation is not performed.
+	 */
+	if (role == ROLE_TARGET)
+		transinfo = &tinfo->user;
+	else 
+		transinfo = &tinfo->goal;
+	*ppr_options &= transinfo->ppr_options;
+	if (transinfo->width == MSG_EXT_WDTR_BUS_8_BIT) {
+		maxsync = MAX(maxsync, AHC_SYNCRATE_ULTRA2);
+		*ppr_options &= ~MSG_EXT_PPR_DT_REQ;
+	}
+	if (transinfo->period == 0) {
+		*period = 0;
+		*ppr_options = 0;
+		return (NULL);
+	}
+	*period = MAX(*period, transinfo->period);
+	return (ahc_find_syncrate(ahc, period, ppr_options, maxsync));
+}
+
+/*
+ * Look up the valid period to SCSIRATE conversion in our table.
+ * Return the period and offset that should be sent to the target
+ * if this was the beginning of an SDTR.
+ */
+struct ahc_syncrate *
+ahc_find_syncrate(struct ahc_softc *ahc, u_int *period,
+		  u_int *ppr_options, u_int maxsync)
+{
+	struct ahc_syncrate *syncrate;
+
+	if ((ahc->features & AHC_DT) == 0)
+		*ppr_options &= ~MSG_EXT_PPR_DT_REQ;
+
+	/* Skip all DT only entries if DT is not available */
+	if ((*ppr_options & MSG_EXT_PPR_DT_REQ) == 0
+	 && maxsync < AHC_SYNCRATE_ULTRA2)
+		maxsync = AHC_SYNCRATE_ULTRA2;
+	
+	for (syncrate = &ahc_syncrates[maxsync];
+	     syncrate->rate != NULL;
+	     syncrate++) {
+
+		/*
+		 * The Ultra2 table doesn't go as low
+		 * as for the Fast/Ultra cards.
+		 */
+		if ((ahc->features & AHC_ULTRA2) != 0
+		 && (syncrate->sxfr_u2 == 0))
+			break;
+
+		if (*period <= syncrate->period) {
+			/*
+			 * When responding to a target that requests
+			 * sync, the requested rate may fall between
+			 * two rates that we can output, but still be
+			 * a rate that we can receive.  Because of this,
+			 * we want to respond to the target with
+			 * the same rate that it sent to us even
+			 * if the period we use to send data to it
+			 * is lower.  Only lower the response period
+			 * if we must.
+			 */
+			if (syncrate == &ahc_syncrates[maxsync])
+				*period = syncrate->period;
+
+			/*
+			 * At some speeds, we only support
+			 * ST transfers.
+			 */
+		 	if ((syncrate->sxfr_u2 & ST_SXFR) != 0)
+				*ppr_options &= ~MSG_EXT_PPR_DT_REQ;
+			break;
+		}
+	}
+
+	if ((*period == 0)
+	 || (syncrate->rate == NULL)
+	 || ((ahc->features & AHC_ULTRA2) != 0
+	  && (syncrate->sxfr_u2 == 0))) {
+		/* Use asynchronous transfers. */
+		*period = 0;
+		syncrate = NULL;
+		*ppr_options &= ~MSG_EXT_PPR_DT_REQ;
+	}
+	return (syncrate);
+}
+
+/*
+ * Convert from an entry in our syncrate table to the SCSI equivalent
+ * sync "period" factor.
+ */
+u_int
+ahc_find_period(struct ahc_softc *ahc, u_int scsirate, u_int maxsync)
+{
+	struct ahc_syncrate *syncrate;
+
+	if ((ahc->features & AHC_ULTRA2) != 0)
+		scsirate &= SXFR_ULTRA2;
+	else
+		scsirate &= SXFR;
+
+	syncrate = &ahc_syncrates[maxsync];
+	while (syncrate->rate != NULL) {
+
+		if ((ahc->features & AHC_ULTRA2) != 0) {
+			if (syncrate->sxfr_u2 == 0)
+				break;
+			else if (scsirate == (syncrate->sxfr_u2 & SXFR_ULTRA2))
+				return (syncrate->period);
+		} else if (scsirate == (syncrate->sxfr & SXFR)) {
+				return (syncrate->period);
+		}
+		syncrate++;
+	}
+	return (0); /* async */
+}
+
+/*
+ * Truncate the given synchronous offset to a value the
+ * current adapter type and syncrate are capable of.
+ */
+void
+ahc_validate_offset(struct ahc_softc *ahc,
+		    struct ahc_initiator_tinfo *tinfo,
+		    struct ahc_syncrate *syncrate,
+		    u_int *offset, int wide, role_t role)
+{
+	u_int maxoffset;
+
+	/* Limit offset to what we can do */
+	if (syncrate == NULL) {
+		maxoffset = 0;
+	} else if ((ahc->features & AHC_ULTRA2) != 0) {
+		maxoffset = MAX_OFFSET_ULTRA2;
+	} else {
+		if (wide)
+			maxoffset = MAX_OFFSET_16BIT;
+		else
+			maxoffset = MAX_OFFSET_8BIT;
+	}
+	*offset = MIN(*offset, maxoffset);
+	if (tinfo != NULL) {
+		if (role == ROLE_TARGET)
+			*offset = MIN(*offset, tinfo->user.offset);
+		else
+			*offset = MIN(*offset, tinfo->goal.offset);
+	}
+}
+
+/*
+ * Truncate the given transfer width parameter to a value the
+ * current adapter type is capable of.
+ */
+void
+ahc_validate_width(struct ahc_softc *ahc, struct ahc_initiator_tinfo *tinfo,
+		   u_int *bus_width, role_t role)
+{
+	switch (*bus_width) {
+	default:
+		if (ahc->features & AHC_WIDE) {
+			/* Respond Wide */
+			*bus_width = MSG_EXT_WDTR_BUS_16_BIT;
+			break;
+		}
+		/* FALLTHROUGH */
+	case MSG_EXT_WDTR_BUS_8_BIT:
+		*bus_width = MSG_EXT_WDTR_BUS_8_BIT;
+		break;
+	}
+	if (tinfo != NULL) {
+		if (role == ROLE_TARGET)
+			*bus_width = MIN(tinfo->user.width, *bus_width);
+		else
+			*bus_width = MIN(tinfo->goal.width, *bus_width);
+	}
+}
+
+/*
+ * Update the bitmask of targets for which the controller should
+ * negotiate with at the next convenient opportunity.  This currently
+ * means the next time we send the initial identify messages for
+ * a new transaction.
+ */
+int
+ahc_update_neg_request(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
+		       struct ahc_tmode_tstate *tstate,
+		       struct ahc_initiator_tinfo *tinfo, ahc_neg_type neg_type)
+{
+	u_int auto_negotiate_orig;
+
+	auto_negotiate_orig = tstate->auto_negotiate;
+	if (neg_type == AHC_NEG_ALWAYS) {
+		/*
+		 * Force our "current" settings to be
+		 * unknown so that unless a bus reset
+		 * occurs the need to renegotiate is
+		 * recorded persistently.
+		 */
+		if ((ahc->features & AHC_WIDE) != 0)
+			tinfo->curr.width = AHC_WIDTH_UNKNOWN;
+		tinfo->curr.period = AHC_PERIOD_UNKNOWN;
+		tinfo->curr.offset = AHC_OFFSET_UNKNOWN;
+	}
+	if (tinfo->curr.period != tinfo->goal.period
+	 || tinfo->curr.width != tinfo->goal.width
+	 || tinfo->curr.offset != tinfo->goal.offset
+	 || tinfo->curr.ppr_options != tinfo->goal.ppr_options
+	 || (neg_type == AHC_NEG_IF_NON_ASYNC
+	  && (tinfo->goal.offset != 0
+	   || tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT
+	   || tinfo->goal.ppr_options != 0)))
+		tstate->auto_negotiate |= devinfo->target_mask;
+	else
+		tstate->auto_negotiate &= ~devinfo->target_mask;
+
+	return (auto_negotiate_orig != tstate->auto_negotiate);
+}
+
+/*
+ * Update the user/goal/curr tables of synchronous negotiation
+ * parameters as well as, in the case of a current or active update,
+ * any data structures on the host controller.  In the case of an
+ * active update, the specified target is currently talking to us on
+ * the bus, so the transfer parameter update must take effect
+ * immediately.
+ */
+void
+ahc_set_syncrate(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
+		 struct ahc_syncrate *syncrate, u_int period,
+		 u_int offset, u_int ppr_options, u_int type, int paused)
+{
+	struct	ahc_initiator_tinfo *tinfo;
+	struct	ahc_tmode_tstate *tstate;
+	u_int	old_period;
+	u_int	old_offset;
+	u_int	old_ppr;
+	int	active;
+	int	update_needed;
+
+	active = (type & AHC_TRANS_ACTIVE) == AHC_TRANS_ACTIVE;
+	update_needed = 0;
+
+	if (syncrate == NULL) {
+		period = 0;
+		offset = 0;
+	}
+
+	tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
+				    devinfo->target, &tstate);
+
+	if ((type & AHC_TRANS_USER) != 0) {
+		tinfo->user.period = period;
+		tinfo->user.offset = offset;
+		tinfo->user.ppr_options = ppr_options;
+	}
+
+	if ((type & AHC_TRANS_GOAL) != 0) {
+		tinfo->goal.period = period;
+		tinfo->goal.offset = offset;
+		tinfo->goal.ppr_options = ppr_options;
+	}
+
+	old_period = tinfo->curr.period;
+	old_offset = tinfo->curr.offset;
+	old_ppr	   = tinfo->curr.ppr_options;
+
+	if ((type & AHC_TRANS_CUR) != 0
+	 && (old_period != period
+	  || old_offset != offset
+	  || old_ppr != ppr_options)) {
+		u_int	scsirate;
+
+		update_needed++;
+		scsirate = tinfo->scsirate;
+		if ((ahc->features & AHC_ULTRA2) != 0) {
+
+			scsirate &= ~(SXFR_ULTRA2|SINGLE_EDGE|ENABLE_CRC);
+			if (syncrate != NULL) {
+				scsirate |= syncrate->sxfr_u2;
+				if ((ppr_options & MSG_EXT_PPR_DT_REQ) != 0)
+					scsirate |= ENABLE_CRC;
+				else
+					scsirate |= SINGLE_EDGE;
+			}
+		} else {
+
+			scsirate &= ~(SXFR|SOFS);
+			/*
+			 * Ensure Ultra mode is set properly for
+			 * this target.
+			 */
+			tstate->ultraenb &= ~devinfo->target_mask;
+			if (syncrate != NULL) {
+				if (syncrate->sxfr & ULTRA_SXFR) {
+					tstate->ultraenb |=
+						devinfo->target_mask;
+				}
+				scsirate |= syncrate->sxfr & SXFR;
+				scsirate |= offset & SOFS;
+			}
+			if (active) {
+				u_int sxfrctl0;
+
+				sxfrctl0 = ahc_inb(ahc, SXFRCTL0);
+				sxfrctl0 &= ~FAST20;
+				if (tstate->ultraenb & devinfo->target_mask)
+					sxfrctl0 |= FAST20;
+				ahc_outb(ahc, SXFRCTL0, sxfrctl0);
+			}
+		}
+		if (active) {
+			ahc_outb(ahc, SCSIRATE, scsirate);
+			if ((ahc->features & AHC_ULTRA2) != 0)
+				ahc_outb(ahc, SCSIOFFSET, offset);
+		}
+
+		tinfo->scsirate = scsirate;
+		tinfo->curr.period = period;
+		tinfo->curr.offset = offset;
+		tinfo->curr.ppr_options = ppr_options;
+
+		ahc_send_async(ahc, devinfo->channel, devinfo->target,
+		  CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL);
+		if (1 /*bootverbose*/) {
+			if (offset != 0) {
+				printf("%s: target %d synchronous at %sMHz%s, "
+				       "offset = 0x%x\n", ahc_name(ahc),
+				       devinfo->target, syncrate->rate,
+				       (ppr_options & MSG_EXT_PPR_DT_REQ)
+				       ? " DT" : "", offset);
+			} else {
+				printf("%s: target %d using "
+				       "asynchronous transfers\n",
+				       ahc_name(ahc), devinfo->target);
+			}
+		}
+	}
+
+	update_needed += ahc_update_neg_request(ahc, devinfo, tstate,
+						tinfo, AHC_NEG_TO_GOAL);
+
+	if (update_needed)
+		ahc_update_pending_scbs(ahc);
+}
+
+/*
+ * Update the user/goal/curr tables of wide negotiation
+ * parameters as well as, in the case of a current or active update,
+ * any data structures on the host controller.  In the case of an
+ * active update, the specified target is currently talking to us on
+ * the bus, so the transfer parameter update must take effect
+ * immediately.
+ */
+void
+ahc_set_width(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
+	      u_int width, u_int type, int paused)
+{
+	struct	ahc_initiator_tinfo *tinfo;
+	struct	ahc_tmode_tstate *tstate;
+	u_int	oldwidth;
+	int	active;
+	int	update_needed;
+
+	active = (type & AHC_TRANS_ACTIVE) == AHC_TRANS_ACTIVE;
+	update_needed = 0;
+	tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
+				    devinfo->target, &tstate);
+
+	if ((type & AHC_TRANS_USER) != 0)
+		tinfo->user.width = width;
+
+	if ((type & AHC_TRANS_GOAL) != 0)
+		tinfo->goal.width = width;
+
+	oldwidth = tinfo->curr.width;
+	if ((type & AHC_TRANS_CUR) != 0 && oldwidth != width) {
+		u_int	scsirate;
+
+		update_needed++;
+		scsirate =  tinfo->scsirate;
+		scsirate &= ~WIDEXFER;
+		if (width == MSG_EXT_WDTR_BUS_16_BIT)
+			scsirate |= WIDEXFER;
+
+		tinfo->scsirate = scsirate;
+
+		if (active)
+			ahc_outb(ahc, SCSIRATE, scsirate);
+
+		tinfo->curr.width = width;
+
+		ahc_send_async(ahc, devinfo->channel, devinfo->target,
+			       CAM_LUN_WILDCARD, AC_TRANSFER_NEG, NULL);
+		if (1 /*bootverbose*/) {
+			printf("%s: target %d using %dbit transfers\n",
+			       ahc_name(ahc), devinfo->target,
+			       8 * (0x01 << width));
+		}
+	}
+
+	update_needed += ahc_update_neg_request(ahc, devinfo, tstate,
+						tinfo, AHC_NEG_TO_GOAL);
+	if (update_needed)
+		ahc_update_pending_scbs(ahc);
+}
+
+/*
+ * Update the current state of tagged queuing for a given target.
+ */
+void
+ahc_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
+	     ahc_queue_alg alg)
+{
+ 	ahc_platform_set_tags(ahc, devinfo, alg);
+}
+
+/*
+ * When the transfer settings for a connection change, update any
+ * in-transit SCBs to contain the new data so the hardware will
+ * be set correctly during future (re)selections.
+ */
+static void
+ahc_update_pending_scbs(struct ahc_softc *ahc)
+{
+	struct	scb *pending_scb;
+	int	pending_scb_count;
+	int	i;
+	int	paused;
+	u_int	saved_scbptr;
+
+	/*
+	 * Traverse the pending SCB list and ensure that all of the
+	 * SCBs there have the proper settings.
+	 */
+	pending_scb_count = 0;
+	LIST_FOREACH(pending_scb, &ahc->pending_scbs, pending_links) {
+		struct ahc_devinfo devinfo;
+		struct hardware_scb *pending_hscb;
+		struct ahc_initiator_tinfo *tinfo;
+		struct ahc_tmode_tstate *tstate;
+
+		ahc_scb_devinfo(ahc, &devinfo, pending_scb);
+		tinfo = ahc_fetch_transinfo(ahc, devinfo.channel,
+					    devinfo.our_scsiid,
+					    devinfo.target, &tstate);
+		pending_hscb = pending_scb->hscb;
+		pending_hscb->control &= ~ULTRAENB;
+		if ((tstate->ultraenb & devinfo.target_mask) != 0)
+			pending_hscb->control |= ULTRAENB;
+		pending_hscb->scsirate = tinfo->scsirate;
+		pending_hscb->scsioffset = tinfo->curr.offset;
+		if ((tstate->auto_negotiate & devinfo.target_mask) == 0
+		 && (pending_scb->flags & SCB_AUTO_NEGOTIATE) != 0) {
+			pending_scb->flags &= ~SCB_AUTO_NEGOTIATE;
+			pending_hscb->control &= ~MK_MESSAGE;
+		}
+		ahc_sync_scb(ahc, pending_scb,
+			     BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
+		pending_scb_count++;
+	}
+
+	if (pending_scb_count == 0)
+		return;
+
+	if (ahc_is_paused(ahc)) {
+		paused = 1;
+	} else {
+		paused = 0;
+		ahc_pause(ahc);
+	}
+
+	saved_scbptr = ahc_inb(ahc, SCBPTR);
+	/* Ensure that the hscbs down on the card match the new information */
+	for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
+		struct	hardware_scb *pending_hscb;
+		u_int	control;
+		u_int	scb_tag;
+
+		ahc_outb(ahc, SCBPTR, i);
+		scb_tag = ahc_inb(ahc, SCB_TAG);
+		pending_scb = ahc_lookup_scb(ahc, scb_tag);
+		if (pending_scb == NULL)
+			continue;
+
+		pending_hscb = pending_scb->hscb;
+		control = ahc_inb(ahc, SCB_CONTROL);
+		control &= ~(ULTRAENB|MK_MESSAGE);
+		control |= pending_hscb->control & (ULTRAENB|MK_MESSAGE);
+		ahc_outb(ahc, SCB_CONTROL, control);
+		ahc_outb(ahc, SCB_SCSIRATE, pending_hscb->scsirate);
+		ahc_outb(ahc, SCB_SCSIOFFSET, pending_hscb->scsioffset);
+	}
+	ahc_outb(ahc, SCBPTR, saved_scbptr);
+
+	if (paused == 0)
+		ahc_unpause(ahc);
+}
+
+/**************************** Pathing Information *****************************/
+static void
+ahc_fetch_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
+{
+	u_int	saved_scsiid;
+	role_t	role;
+	int	our_id;
+
+	if (ahc_inb(ahc, SSTAT0) & TARGET)
+		role = ROLE_TARGET;
+	else
+		role = ROLE_INITIATOR;
+
+	if (role == ROLE_TARGET
+	 && (ahc->features & AHC_MULTI_TID) != 0
+	 && (ahc_inb(ahc, SEQ_FLAGS)
+ 	   & (CMDPHASE_PENDING|TARG_CMD_PENDING|NO_DISCONNECT)) != 0) {
+		/* We were selected, so pull our id from TARGIDIN */
+		our_id = ahc_inb(ahc, TARGIDIN) & OID;
+	} else if ((ahc->features & AHC_ULTRA2) != 0)
+		our_id = ahc_inb(ahc, SCSIID_ULTRA2) & OID;
+	else
+		our_id = ahc_inb(ahc, SCSIID) & OID;
+
+	saved_scsiid = ahc_inb(ahc, SAVED_SCSIID);
+	ahc_compile_devinfo(devinfo,
+			    our_id,
+			    SCSIID_TARGET(ahc, saved_scsiid),
+			    ahc_inb(ahc, SAVED_LUN),
+			    SCSIID_CHANNEL(ahc, saved_scsiid),
+			    role);
+}
+
+struct ahc_phase_table_entry*
+ahc_lookup_phase_entry(int phase)
+{
+	struct ahc_phase_table_entry *entry;
+	struct ahc_phase_table_entry *last_entry;
+
+	/*
+	 * num_phases doesn't include the default entry which
+	 * will be returned if the phase doesn't match.
+	 */
+	last_entry = &ahc_phase_table[num_phases];
+	for (entry = ahc_phase_table; entry < last_entry; entry++) {
+		if (phase == entry->phase)
+			break;
+	}
+	return (entry);
+}
+
+void
+ahc_compile_devinfo(struct ahc_devinfo *devinfo, u_int our_id, u_int target,
+		    u_int lun, char channel, role_t role)
+{
+	devinfo->our_scsiid = our_id;
+	devinfo->target = target;
+	devinfo->lun = lun;
+	devinfo->target_offset = target;
+	devinfo->channel = channel;
+	devinfo->role = role;
+	if (channel == 'B')
+		devinfo->target_offset += 8;
+	devinfo->target_mask = (0x01 << devinfo->target_offset);
+}
+
+void
+ahc_print_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
+{
+	printf("%s:%c:%d:%d: ", ahc_name(ahc), devinfo->channel,
+	       devinfo->target, devinfo->lun);
+}
+
+void
+ahc_scb_devinfo(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
+		struct scb *scb)
+{
+	role_t	role;
+	int	our_id;
+
+	our_id = SCSIID_OUR_ID(scb->hscb->scsiid);
+	role = ROLE_INITIATOR;
+	if ((scb->flags & SCB_TARGET_SCB) != 0)
+		role = ROLE_TARGET;
+	ahc_compile_devinfo(devinfo, our_id, SCB_GET_TARGET(ahc, scb),
+			    SCB_GET_LUN(scb), SCB_GET_CHANNEL(ahc, scb), role);
+}
+
+
+/************************ Message Phase Processing ****************************/
+static void
+ahc_assert_atn(struct ahc_softc *ahc)
+{
+	u_int scsisigo;
+
+	scsisigo = ATNO;
+	if ((ahc->features & AHC_DT) == 0)
+		scsisigo |= ahc_inb(ahc, SCSISIGI);
+	ahc_outb(ahc, SCSISIGO, scsisigo);
+}
+
+/*
+ * When an initiator transaction with the MK_MESSAGE flag either reconnects
+ * or enters the initial message out phase, we are interrupted.  Fill our
+ * outgoing message buffer with the appropriate message and begin handing
+ * the message phase(s) manually.
+ */
+static void
+ahc_setup_initiator_msgout(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
+			   struct scb *scb)
+{
+	/*
+	 * To facilitate adding multiple messages together,
+	 * each routine should increment the index and len
+	 * variables instead of setting them explicitly.
+	 */
+	ahc->msgout_index = 0;
+	ahc->msgout_len = 0;
+
+	if ((scb->flags & SCB_DEVICE_RESET) == 0
+	 && ahc_inb(ahc, MSG_OUT) == MSG_IDENTIFYFLAG) {
+		u_int identify_msg;
+
+		identify_msg = MSG_IDENTIFYFLAG | SCB_GET_LUN(scb);
+		if ((scb->hscb->control & DISCENB) != 0)
+			identify_msg |= MSG_IDENTIFY_DISCFLAG;
+		ahc->msgout_buf[ahc->msgout_index++] = identify_msg;
+		ahc->msgout_len++;
+
+		if ((scb->hscb->control & TAG_ENB) != 0) {
+			ahc->msgout_buf[ahc->msgout_index++] =
+			    scb->hscb->control & (TAG_ENB|SCB_TAG_TYPE);
+			ahc->msgout_buf[ahc->msgout_index++] = scb->hscb->tag;
+			ahc->msgout_len += 2;
+		}
+	}
+
+	if (scb->flags & SCB_DEVICE_RESET) {
+		ahc->msgout_buf[ahc->msgout_index++] = MSG_BUS_DEV_RESET;
+		ahc->msgout_len++;
+		ahc_print_path(ahc, scb);
+		printf("Bus Device Reset Message Sent\n");
+		/*
+		 * Clear our selection hardware in advance of
+		 * the busfree.  We may have an entry in the waiting
+		 * Q for this target, and we don't want to go about
+		 * selecting while we handle the busfree and blow it
+		 * away.
+		 */
+		ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO));
+	} else if ((scb->flags & SCB_ABORT) != 0) {
+		if ((scb->hscb->control & TAG_ENB) != 0)
+			ahc->msgout_buf[ahc->msgout_index++] = MSG_ABORT_TAG;
+		else
+			ahc->msgout_buf[ahc->msgout_index++] = MSG_ABORT;
+		ahc->msgout_len++;
+		ahc_print_path(ahc, scb);
+		printf("Abort%s Message Sent\n",
+		       (scb->hscb->control & TAG_ENB) != 0 ? " Tag" : "");
+		/*
+		 * Clear our selection hardware in advance of
+		 * the busfree.  We may have an entry in the waiting
+		 * Q for this target, and we don't want to go about
+		 * selecting while we handle the busfree and blow it
+		 * away.
+		 */
+		ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO));
+	} else if ((scb->flags & (SCB_AUTO_NEGOTIATE|SCB_NEGOTIATE)) != 0) {
+		ahc_build_transfer_msg(ahc, devinfo);
+	} else {
+		printf("ahc_intr: AWAITING_MSG for an SCB that "
+		       "does not have a waiting message\n");
+		printf("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid,
+		       devinfo->target_mask);
+		panic("SCB = %d, SCB Control = %x, MSG_OUT = %x "
+		      "SCB flags = %x", scb->hscb->tag, scb->hscb->control,
+		      ahc_inb(ahc, MSG_OUT), scb->flags);
+	}
+
+	/*
+	 * Clear the MK_MESSAGE flag from the SCB so we aren't
+	 * asked to send this message again.
+	 */
+	ahc_outb(ahc, SCB_CONTROL, ahc_inb(ahc, SCB_CONTROL) & ~MK_MESSAGE);
+	scb->hscb->control &= ~MK_MESSAGE;
+	ahc->msgout_index = 0;
+	ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
+}
+
+/*
+ * Build an appropriate transfer negotiation message for the
+ * currently active target.
+ */
+static void
+ahc_build_transfer_msg(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
+{
+	/*
+	 * We need to initiate transfer negotiations.
+	 * If our current and goal settings are identical,
+	 * we want to renegotiate due to a check condition.
+	 */
+	struct	ahc_initiator_tinfo *tinfo;
+	struct	ahc_tmode_tstate *tstate;
+	struct	ahc_syncrate *rate;
+	int	dowide;
+	int	dosync;
+	int	doppr;
+	u_int	period;
+	u_int	ppr_options;
+	u_int	offset;
+
+	tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
+				    devinfo->target, &tstate);
+	/*
+	 * Filter our period based on the current connection.
+	 * If we can't perform DT transfers on this segment (not in LVD
+	 * mode for instance), then our decision to issue a PPR message
+	 * may change.
+	 */
+	period = tinfo->goal.period;
+	ppr_options = tinfo->goal.ppr_options;
+	/* Target initiated PPR is not allowed in the SCSI spec */
+	if (devinfo->role == ROLE_TARGET)
+		ppr_options = 0;
+	rate = ahc_devlimited_syncrate(ahc, tinfo, &period,
+				       &ppr_options, devinfo->role);
+	dowide = tinfo->curr.width != tinfo->goal.width;
+	dosync = tinfo->curr.period != period;
+	/*
+	 * Only use PPR if we have options that need it, even if the device
+	 * claims to support it.  There might be an expander in the way
+	 * that doesn't.
+	 */
+	doppr = ppr_options != 0;
+
+	if (!dowide && !dosync && !doppr) {
+		dowide = tinfo->goal.width != MSG_EXT_WDTR_BUS_8_BIT;
+		dosync = tinfo->goal.offset != 0;
+	}
+
+	if (!dowide && !dosync && !doppr) {
+		/*
+		 * Force async with a WDTR message if we have a wide bus,
+		 * or just issue an SDTR with a 0 offset.
+		 */
+		if ((ahc->features & AHC_WIDE) != 0)
+			dowide = 1;
+		else
+			dosync = 1;
+
+		if (bootverbose) {
+			ahc_print_devinfo(ahc, devinfo);
+			printf("Ensuring async\n");
+		}
+	}
+
+	/* Target initiated PPR is not allowed in the SCSI spec */
+	if (devinfo->role == ROLE_TARGET)
+		doppr = 0;
+
+	/*
+	 * Both the PPR message and SDTR message require the
+	 * goal syncrate to be limited to what the target device
+	 * is capable of handling (based on whether an LVD->SE
+	 * expander is on the bus), so combine these two cases.
+	 * Regardless, guarantee that if we are using WDTR and SDTR
+	 * messages that WDTR comes first.
+	 */
+	if (doppr || (dosync && !dowide)) {
+
+		offset = tinfo->goal.offset;
+		ahc_validate_offset(ahc, tinfo, rate, &offset,
+				    doppr ? tinfo->goal.width
+					  : tinfo->curr.width,
+				    devinfo->role);
+		if (doppr) {
+			ahc_construct_ppr(ahc, devinfo, period, offset,
+					  tinfo->goal.width, ppr_options);
+		} else {
+			ahc_construct_sdtr(ahc, devinfo, period, offset);
+		}
+	} else {
+		ahc_construct_wdtr(ahc, devinfo, tinfo->goal.width);
+	}
+}
+
+/*
+ * Build a synchronous negotiation message in our message
+ * buffer based on the input parameters.
+ */
+static void
+ahc_construct_sdtr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
+		   u_int period, u_int offset)
+{
+	if (offset == 0)
+		period = AHC_ASYNC_XFER_PERIOD;
+	ahc->msgout_buf[ahc->msgout_index++] = MSG_EXTENDED;
+	ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_SDTR_LEN;
+	ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_SDTR;
+	ahc->msgout_buf[ahc->msgout_index++] = period;
+	ahc->msgout_buf[ahc->msgout_index++] = offset;
+	ahc->msgout_len += 5;
+	if (bootverbose) {
+		printf("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n",
+		       ahc_name(ahc), devinfo->channel, devinfo->target,
+		       devinfo->lun, period, offset);
+	}
+}
+
+/*
+ * Build a wide negotiation message in our message
+ * buffer based on the input parameters.
+ */
+static void
+ahc_construct_wdtr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
+		   u_int bus_width)
+{
+	ahc->msgout_buf[ahc->msgout_index++] = MSG_EXTENDED;
+	ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_WDTR_LEN;
+	ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_WDTR;
+	ahc->msgout_buf[ahc->msgout_index++] = bus_width;
+	ahc->msgout_len += 4;
+	if (bootverbose) {
+		printf("(%s:%c:%d:%d): Sending WDTR %x\n",
+		       ahc_name(ahc), devinfo->channel, devinfo->target,
+		       devinfo->lun, bus_width);
+	}
+}
+
+/*
+ * Build a parallel protocol request message in our message
+ * buffer based on the input parameters.
+ */
+static void
+ahc_construct_ppr(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
+		  u_int period, u_int offset, u_int bus_width,
+		  u_int ppr_options)
+{
+	if (offset == 0)
+		period = AHC_ASYNC_XFER_PERIOD;
+	ahc->msgout_buf[ahc->msgout_index++] = MSG_EXTENDED;
+	ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_PPR_LEN;
+	ahc->msgout_buf[ahc->msgout_index++] = MSG_EXT_PPR;
+	ahc->msgout_buf[ahc->msgout_index++] = period;
+	ahc->msgout_buf[ahc->msgout_index++] = 0;
+	ahc->msgout_buf[ahc->msgout_index++] = offset;
+	ahc->msgout_buf[ahc->msgout_index++] = bus_width;
+	ahc->msgout_buf[ahc->msgout_index++] = ppr_options;
+	ahc->msgout_len += 8;
+	if (bootverbose) {
+		printf("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, "
+		       "offset %x, ppr_options %x\n", ahc_name(ahc),
+		       devinfo->channel, devinfo->target, devinfo->lun,
+		       bus_width, period, offset, ppr_options);
+	}
+}
+
+/*
+ * Clear any active message state.
+ */
+static void
+ahc_clear_msg_state(struct ahc_softc *ahc)
+{
+	ahc->msgout_len = 0;
+	ahc->msgin_index = 0;
+	ahc->msg_type = MSG_TYPE_NONE;
+	if ((ahc_inb(ahc, SCSISIGI) & ATNI) != 0) {
+		/*
+		 * The target didn't care to respond to our
+		 * message request, so clear ATN.
+		 */
+		ahc_outb(ahc, CLRSINT1, CLRATNO);
+	}
+	ahc_outb(ahc, MSG_OUT, MSG_NOOP);
+	ahc_outb(ahc, SEQ_FLAGS2,
+		 ahc_inb(ahc, SEQ_FLAGS2) & ~TARGET_MSG_PENDING);
+}
+
+static void
+ahc_handle_proto_violation(struct ahc_softc *ahc)
+{
+	struct	ahc_devinfo devinfo;
+	struct	scb *scb;
+	u_int	scbid;
+	u_int	seq_flags;
+	u_int	curphase;
+	u_int	lastphase;
+	int	found;
+
+	ahc_fetch_devinfo(ahc, &devinfo);
+	scbid = ahc_inb(ahc, SCB_TAG);
+	scb = ahc_lookup_scb(ahc, scbid);
+	seq_flags = ahc_inb(ahc, SEQ_FLAGS);
+	curphase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
+	lastphase = ahc_inb(ahc, LASTPHASE);
+	if ((seq_flags & NOT_IDENTIFIED) != 0) {
+
+		/*
+		 * The reconnecting target either did not send an
+		 * identify message, or did, but we didn't find an SCB
+		 * to match.
+		 */
+		ahc_print_devinfo(ahc, &devinfo);
+		printf("Target did not send an IDENTIFY message. "
+		       "LASTPHASE = 0x%x.\n", lastphase);
+		scb = NULL;
+	} else if (scb == NULL) {
+		/*
+		 * We don't seem to have an SCB active for this
+		 * transaction.  Print an error and reset the bus.
+		 */
+		ahc_print_devinfo(ahc, &devinfo);
+		printf("No SCB found during protocol violation\n");
+		goto proto_violation_reset;
+	} else {
+		ahc_set_transaction_status(scb, CAM_SEQUENCE_FAIL);
+		if ((seq_flags & NO_CDB_SENT) != 0) {
+			ahc_print_path(ahc, scb);
+			printf("No or incomplete CDB sent to device.\n");
+		} else if ((ahc_inb(ahc, SCB_CONTROL) & STATUS_RCVD) == 0) {
+			/*
+			 * The target never bothered to provide status to
+			 * us prior to completing the command.  Since we don't
+			 * know the disposition of this command, we must attempt
+			 * to abort it.  Assert ATN and prepare to send an abort
+			 * message.
+			 */
+			ahc_print_path(ahc, scb);
+			printf("Completed command without status.\n");
+		} else {
+			ahc_print_path(ahc, scb);
+			printf("Unknown protocol violation.\n");
+			ahc_dump_card_state(ahc);
+		}
+	}
+	if ((lastphase & ~P_DATAIN_DT) == 0
+	 || lastphase == P_COMMAND) {
+proto_violation_reset:
+		/*
+		 * Target either went directly to data/command
+		 * phase or didn't respond to our ATN.
+		 * The only safe thing to do is to blow
+		 * it away with a bus reset.
+		 */
+		found = ahc_reset_channel(ahc, 'A', TRUE);
+		printf("%s: Issued Channel %c Bus Reset. "
+		       "%d SCBs aborted\n", ahc_name(ahc), 'A', found);
+	} else {
+		/*
+		 * Leave the selection hardware off in case
+		 * this abort attempt will affect yet to
+		 * be sent commands.
+		 */
+		ahc_outb(ahc, SCSISEQ,
+			 ahc_inb(ahc, SCSISEQ) & ~ENSELO);
+		ahc_assert_atn(ahc);
+		ahc_outb(ahc, MSG_OUT, HOST_MSG);
+		if (scb == NULL) {
+			ahc_print_devinfo(ahc, &devinfo);
+			ahc->msgout_buf[0] = MSG_ABORT_TASK;
+			ahc->msgout_len = 1;
+			ahc->msgout_index = 0;
+			ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
+		} else {
+			ahc_print_path(ahc, scb);
+			scb->flags |= SCB_ABORT;
+		}
+		printf("Protocol violation %s.  Attempting to abort.\n",
+		       ahc_lookup_phase_entry(curphase)->phasemsg);
+	}
+}
+
+/*
+ * Manual message loop handler.
+ */
+static void
+ahc_handle_message_phase(struct ahc_softc *ahc)
+{ 
+	struct	ahc_devinfo devinfo;
+	u_int	bus_phase;
+	int	end_session;
+
+	ahc_fetch_devinfo(ahc, &devinfo);
+	end_session = FALSE;
+	bus_phase = ahc_inb(ahc, SCSISIGI) & PHASE_MASK;
+
+reswitch:
+	switch (ahc->msg_type) {
+	case MSG_TYPE_INITIATOR_MSGOUT:
+	{
+		int lastbyte;
+		int phasemis;
+		int msgdone;
+
+		if (ahc->msgout_len == 0)
+			panic("HOST_MSG_LOOP interrupt with no active message");
+
+#ifdef AHC_DEBUG
+		if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
+			ahc_print_devinfo(ahc, &devinfo);
+			printf("INITIATOR_MSG_OUT");
+		}
+#endif
+		phasemis = bus_phase != P_MESGOUT;
+		if (phasemis) {
+#ifdef AHC_DEBUG
+			if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
+				printf(" PHASEMIS %s\n",
+				       ahc_lookup_phase_entry(bus_phase)
+							     ->phasemsg);
+			}
+#endif
+			if (bus_phase == P_MESGIN) {
+				/*
+				 * Change gears and see if
+				 * this messages is of interest to
+				 * us or should be passed back to
+				 * the sequencer.
+				 */
+				ahc_outb(ahc, CLRSINT1, CLRATNO);
+				ahc->send_msg_perror = FALSE;
+				ahc->msg_type = MSG_TYPE_INITIATOR_MSGIN;
+				ahc->msgin_index = 0;
+				goto reswitch;
+			}
+			end_session = TRUE;
+			break;
+		}
+
+		if (ahc->send_msg_perror) {
+			ahc_outb(ahc, CLRSINT1, CLRATNO);
+			ahc_outb(ahc, CLRSINT1, CLRREQINIT);
+#ifdef AHC_DEBUG
+			if ((ahc_debug & AHC_SHOW_MESSAGES) != 0)
+				printf(" byte 0x%x\n", ahc->send_msg_perror);
+#endif
+			ahc_outb(ahc, SCSIDATL, MSG_PARITY_ERROR);
+			break;
+		}
+
+		msgdone	= ahc->msgout_index == ahc->msgout_len;
+		if (msgdone) {
+			/*
+			 * The target has requested a retry.
+			 * Re-assert ATN, reset our message index to
+			 * 0, and try again.
+			 */
+			ahc->msgout_index = 0;
+			ahc_assert_atn(ahc);
+		}
+
+		lastbyte = ahc->msgout_index == (ahc->msgout_len - 1);
+		if (lastbyte) {
+			/* Last byte is signified by dropping ATN */
+			ahc_outb(ahc, CLRSINT1, CLRATNO);
+		}
+
+		/*
+		 * Clear our interrupt status and present
+		 * the next byte on the bus.
+		 */
+		ahc_outb(ahc, CLRSINT1, CLRREQINIT);
+#ifdef AHC_DEBUG
+		if ((ahc_debug & AHC_SHOW_MESSAGES) != 0)
+			printf(" byte 0x%x\n",
+			       ahc->msgout_buf[ahc->msgout_index]);
+#endif
+		ahc_outb(ahc, SCSIDATL, ahc->msgout_buf[ahc->msgout_index++]);
+		break;
+	}
+	case MSG_TYPE_INITIATOR_MSGIN:
+	{
+		int phasemis;
+		int message_done;
+
+#ifdef AHC_DEBUG
+		if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
+			ahc_print_devinfo(ahc, &devinfo);
+			printf("INITIATOR_MSG_IN");
+		}
+#endif
+		phasemis = bus_phase != P_MESGIN;
+		if (phasemis) {
+#ifdef AHC_DEBUG
+			if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
+				printf(" PHASEMIS %s\n",
+				       ahc_lookup_phase_entry(bus_phase)
+							     ->phasemsg);
+			}
+#endif
+			ahc->msgin_index = 0;
+			if (bus_phase == P_MESGOUT
+			 && (ahc->send_msg_perror == TRUE
+			  || (ahc->msgout_len != 0
+			   && ahc->msgout_index == 0))) {
+				ahc->msg_type = MSG_TYPE_INITIATOR_MSGOUT;
+				goto reswitch;
+			}
+			end_session = TRUE;
+			break;
+		}
+
+		/* Pull the byte in without acking it */
+		ahc->msgin_buf[ahc->msgin_index] = ahc_inb(ahc, SCSIBUSL);
+#ifdef AHC_DEBUG
+		if ((ahc_debug & AHC_SHOW_MESSAGES) != 0)
+			printf(" byte 0x%x\n",
+			       ahc->msgin_buf[ahc->msgin_index]);
+#endif
+
+		message_done = ahc_parse_msg(ahc, &devinfo);
+
+		if (message_done) {
+			/*
+			 * Clear our incoming message buffer in case there
+			 * is another message following this one.
+			 */
+			ahc->msgin_index = 0;
+
+			/*
+			 * If this message illicited a response,
+			 * assert ATN so the target takes us to the
+			 * message out phase.
+			 */
+			if (ahc->msgout_len != 0) {
+#ifdef AHC_DEBUG
+				if ((ahc_debug & AHC_SHOW_MESSAGES) != 0) {
+					ahc_print_devinfo(ahc, &devinfo);
+					printf("Asserting ATN for response\n");
+				}
+#endif
+				ahc_assert_atn(ahc);
+			}
+		} else 
+			ahc->msgin_index++;
+
+		if (message_done == MSGLOOP_TERMINATED) {
+			end_session = TRUE;
+		} else {
+			/* Ack the byte */
+			ahc_outb(ahc, CLRSINT1, CLRREQINIT);
+			ahc_inb(ahc, SCSIDATL);
+		}
+		break;
+	}
+	case MSG_TYPE_TARGET_MSGIN:
+	{
+		int msgdone;
+		int msgout_request;
+
+		if (ahc->msgout_len == 0)
+			panic("Target MSGIN with no active message");
+
+		/*
+		 * If we interrupted a mesgout session, the initiator
+		 * will not know this until our first REQ.  So, we
+		 * only honor mesgout requests after we've sent our
+		 * first byte.
+		 */
+		if ((ahc_inb(ahc, SCSISIGI) & ATNI) != 0
+		 && ahc->msgout_index > 0)
+			msgout_request = TRUE;
+		else
+			msgout_request = FALSE;
+
+		if (msgout_request) {
+
+			/*
+			 * Change gears and see if
+			 * this messages is of interest to
+			 * us or should be passed back to
+			 * the sequencer.
+			 */
+			ahc->msg_type = MSG_TYPE_TARGET_MSGOUT;
+			ahc_outb(ahc, SCSISIGO, P_MESGOUT | BSYO);
+			ahc->msgin_index = 0;
+			/* Dummy read to REQ for first byte */
+			ahc_inb(ahc, SCSIDATL);
+			ahc_outb(ahc, SXFRCTL0,
+				 ahc_inb(ahc, SXFRCTL0) | SPIOEN);
+			break;
+		}
+
+		msgdone = ahc->msgout_index == ahc->msgout_len;
+		if (msgdone) {
+			ahc_outb(ahc, SXFRCTL0,
+				 ahc_inb(ahc, SXFRCTL0) & ~SPIOEN);
+			end_session = TRUE;
+			break;
+		}
+
+		/*
+		 * Present the next byte on the bus.
+		 */
+		ahc_outb(ahc, SXFRCTL0, ahc_inb(ahc, SXFRCTL0) | SPIOEN);
+		ahc_outb(ahc, SCSIDATL, ahc->msgout_buf[ahc->msgout_index++]);
+		break;
+	}
+	case MSG_TYPE_TARGET_MSGOUT:
+	{
+		int lastbyte;
+		int msgdone;
+
+		/*
+		 * The initiator signals that this is
+		 * the last byte by dropping ATN.
+		 */
+		lastbyte = (ahc_inb(ahc, SCSISIGI) & ATNI) == 0;
+
+		/*
+		 * Read the latched byte, but turn off SPIOEN first
+		 * so that we don't inadvertently cause a REQ for the
+		 * next byte.
+		 */
+		ahc_outb(ahc, SXFRCTL0, ahc_inb(ahc, SXFRCTL0) & ~SPIOEN);
+		ahc->msgin_buf[ahc->msgin_index] = ahc_inb(ahc, SCSIDATL);
+		msgdone = ahc_parse_msg(ahc, &devinfo);
+		if (msgdone == MSGLOOP_TERMINATED) {
+			/*
+			 * The message is *really* done in that it caused
+			 * us to go to bus free.  The sequencer has already
+			 * been reset at this point, so pull the ejection
+			 * handle.
+			 */
+			return;
+		}
+		
+		ahc->msgin_index++;
+
+		/*
+		 * XXX Read spec about initiator dropping ATN too soon
+		 *     and use msgdone to detect it.
+		 */
+		if (msgdone == MSGLOOP_MSGCOMPLETE) {
+			ahc->msgin_index = 0;
+
+			/*
+			 * If this message illicited a response, transition
+			 * to the Message in phase and send it.
+			 */
+			if (ahc->msgout_len != 0) {
+				ahc_outb(ahc, SCSISIGO, P_MESGIN | BSYO);
+				ahc_outb(ahc, SXFRCTL0,
+					 ahc_inb(ahc, SXFRCTL0) | SPIOEN);
+				ahc->msg_type = MSG_TYPE_TARGET_MSGIN;
+				ahc->msgin_index = 0;
+				break;
+			}
+		}
+
+		if (lastbyte)
+			end_session = TRUE;
+		else {
+			/* Ask for the next byte. */
+			ahc_outb(ahc, SXFRCTL0,
+				 ahc_inb(ahc, SXFRCTL0) | SPIOEN);
+		}
+
+		break;
+	}
+	default:
+		panic("Unknown REQINIT message type");
+	}
+
+	if (end_session) {
+		ahc_clear_msg_state(ahc);
+		ahc_outb(ahc, RETURN_1, EXIT_MSG_LOOP);
+	} else
+		ahc_outb(ahc, RETURN_1, CONT_MSG_LOOP);
+}
+
+/*
+ * See if we sent a particular extended message to the target.
+ * If "full" is true, return true only if the target saw the full
+ * message.  If "full" is false, return true if the target saw at
+ * least the first byte of the message.
+ */
+static int
+ahc_sent_msg(struct ahc_softc *ahc, ahc_msgtype type, u_int msgval, int full)
+{
+	int found;
+	u_int index;
+
+	found = FALSE;
+	index = 0;
+
+	while (index < ahc->msgout_len) {
+		if (ahc->msgout_buf[index] == MSG_EXTENDED) {
+			u_int end_index;
+
+			end_index = index + 1 + ahc->msgout_buf[index + 1];
+			if (ahc->msgout_buf[index+2] == msgval
+			 && type == AHCMSG_EXT) {
+
+				if (full) {
+					if (ahc->msgout_index > end_index)
+						found = TRUE;
+				} else if (ahc->msgout_index > index)
+					found = TRUE;
+			}
+			index = end_index;
+		} else if (ahc->msgout_buf[index] >= MSG_SIMPLE_TASK
+			&& ahc->msgout_buf[index] <= MSG_IGN_WIDE_RESIDUE) {
+
+			/* Skip tag type and tag id or residue param*/
+			index += 2;
+		} else {
+			/* Single byte message */
+			if (type == AHCMSG_1B
+			 && ahc->msgout_buf[index] == msgval
+			 && ahc->msgout_index > index)
+				found = TRUE;
+			index++;
+		}
+
+		if (found)
+			break;
+	}
+	return (found);
+}
+
+/*
+ * Wait for a complete incoming message, parse it, and respond accordingly.
+ */
+static int
+ahc_parse_msg(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
+{
+	struct	ahc_initiator_tinfo *tinfo;
+	struct	ahc_tmode_tstate *tstate;
+	int	reject;
+	int	done;
+	int	response;
+	u_int	targ_scsirate;
+
+	done = MSGLOOP_IN_PROG;
+	response = FALSE;
+	reject = FALSE;
+	tinfo = ahc_fetch_transinfo(ahc, devinfo->channel, devinfo->our_scsiid,
+				    devinfo->target, &tstate);
+	targ_scsirate = tinfo->scsirate;
+
+	/*
+	 * Parse as much of the message as is available,
+	 * rejecting it if we don't support it.  When
+	 * the entire message is available and has been
+	 * handled, return MSGLOOP_MSGCOMPLETE, indicating
+	 * that we have parsed an entire message.
+	 *
+	 * In the case of extended messages, we accept the length
+	 * byte outright and perform more checking once we know the
+	 * extended message type.
+	 */
+	switch (ahc->msgin_buf[0]) {
+	case MSG_DISCONNECT:
+	case MSG_SAVEDATAPOINTER:
+	case MSG_CMDCOMPLETE:
+	case MSG_RESTOREPOINTERS:
+	case MSG_IGN_WIDE_RESIDUE:
+		/*
+		 * End our message loop as these are messages
+		 * the sequencer handles on its own.
+		 */
+		done = MSGLOOP_TERMINATED;
+		break;
+	case MSG_MESSAGE_REJECT:
+		response = ahc_handle_msg_reject(ahc, devinfo);
+		/* FALLTHROUGH */
+	case MSG_NOOP:
+		done = MSGLOOP_MSGCOMPLETE;
+		break;
+	case MSG_EXTENDED:
+	{
+		/* Wait for enough of the message to begin validation */
+		if (ahc->msgin_index < 2)
+			break;
+		switch (ahc->msgin_buf[2]) {
+		case MSG_EXT_SDTR:
+		{
+			struct	 ahc_syncrate *syncrate;
+			u_int	 period;
+			u_int	 ppr_options;
+			u_int	 offset;
+			u_int	 saved_offset;
+			
+			if (ahc->msgin_buf[1] != MSG_EXT_SDTR_LEN) {
+				reject = TRUE;
+				break;
+			}
+
+			/*
+			 * Wait until we have both args before validating
+			 * and acting on this message.
+			 *
+			 * Add one to MSG_EXT_SDTR_LEN to account for
+			 * the extended message preamble.
+			 */
+			if (ahc->msgin_index < (MSG_EXT_SDTR_LEN + 1))
+				break;
+
+			period = ahc->msgin_buf[3];
+			ppr_options = 0;
+			saved_offset = offset = ahc->msgin_buf[4];
+			syncrate = ahc_devlimited_syncrate(ahc, tinfo, &period,
+							   &ppr_options,
+							   devinfo->role);
+			ahc_validate_offset(ahc, tinfo, syncrate, &offset,
+					    targ_scsirate & WIDEXFER,
+					    devinfo->role);
+			if (bootverbose) {
+				printf("(%s:%c:%d:%d): Received "
+				       "SDTR period %x, offset %x\n\t"
+				       "Filtered to period %x, offset %x\n",
+				       ahc_name(ahc), devinfo->channel,
+				       devinfo->target, devinfo->lun,
+				       ahc->msgin_buf[3], saved_offset,
+				       period, offset);
+			}
+			ahc_set_syncrate(ahc, devinfo, 
+					 syncrate, period,
+					 offset, ppr_options,
+					 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
+					 /*paused*/TRUE);
+
+			/*
+			 * See if we initiated Sync Negotiation
+			 * and didn't have to fall down to async
+			 * transfers.
+			 */
+			if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_SDTR, TRUE)) {
+				/* We started it */
+				if (saved_offset != offset) {
+					/* Went too low - force async */
+					reject = TRUE;
+				}
+			} else {
+				/*
+				 * Send our own SDTR in reply
+				 */
+				if (bootverbose
+				 && devinfo->role == ROLE_INITIATOR) {
+					printf("(%s:%c:%d:%d): Target "
+					       "Initiated SDTR\n",
+					       ahc_name(ahc), devinfo->channel,
+					       devinfo->target, devinfo->lun);
+				}
+				ahc->msgout_index = 0;
+				ahc->msgout_len = 0;
+				ahc_construct_sdtr(ahc, devinfo,
+						   period, offset);
+				ahc->msgout_index = 0;
+				response = TRUE;
+			}
+			done = MSGLOOP_MSGCOMPLETE;
+			break;
+		}
+		case MSG_EXT_WDTR:
+		{
+			u_int bus_width;
+			u_int saved_width;
+			u_int sending_reply;
+
+			sending_reply = FALSE;
+			if (ahc->msgin_buf[1] != MSG_EXT_WDTR_LEN) {
+				reject = TRUE;
+				break;
+			}
+
+			/*
+			 * Wait until we have our arg before validating
+			 * and acting on this message.
+			 *
+			 * Add one to MSG_EXT_WDTR_LEN to account for
+			 * the extended message preamble.
+			 */
+			if (ahc->msgin_index < (MSG_EXT_WDTR_LEN + 1))
+				break;
+
+			bus_width = ahc->msgin_buf[3];
+			saved_width = bus_width;
+			ahc_validate_width(ahc, tinfo, &bus_width,
+					   devinfo->role);
+			if (bootverbose) {
+				printf("(%s:%c:%d:%d): Received WDTR "
+				       "%x filtered to %x\n",
+				       ahc_name(ahc), devinfo->channel,
+				       devinfo->target, devinfo->lun,
+				       saved_width, bus_width);
+			}
+
+			if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_WDTR, TRUE)) {
+				/*
+				 * Don't send a WDTR back to the
+				 * target, since we asked first.
+				 * If the width went higher than our
+				 * request, reject it.
+				 */
+				if (saved_width > bus_width) {
+					reject = TRUE;
+					printf("(%s:%c:%d:%d): requested %dBit "
+					       "transfers.  Rejecting...\n",
+					       ahc_name(ahc), devinfo->channel,
+					       devinfo->target, devinfo->lun,
+					       8 * (0x01 << bus_width));
+					bus_width = 0;
+				}
+			} else {
+				/*
+				 * Send our own WDTR in reply
+				 */
+				if (bootverbose
+				 && devinfo->role == ROLE_INITIATOR) {
+					printf("(%s:%c:%d:%d): Target "
+					       "Initiated WDTR\n",
+					       ahc_name(ahc), devinfo->channel,
+					       devinfo->target, devinfo->lun);
+				}
+				ahc->msgout_index = 0;
+				ahc->msgout_len = 0;
+				ahc_construct_wdtr(ahc, devinfo, bus_width);
+				ahc->msgout_index = 0;
+				response = TRUE;
+				sending_reply = TRUE;
+			}
+			ahc_set_width(ahc, devinfo, bus_width,
+				      AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
+				      /*paused*/TRUE);
+			/* After a wide message, we are async */
+			ahc_set_syncrate(ahc, devinfo,
+					 /*syncrate*/NULL, /*period*/0,
+					 /*offset*/0, /*ppr_options*/0,
+					 AHC_TRANS_ACTIVE, /*paused*/TRUE);
+			if (sending_reply == FALSE && reject == FALSE) {
+
+				if (tinfo->goal.offset) {
+					ahc->msgout_index = 0;
+					ahc->msgout_len = 0;
+					ahc_build_transfer_msg(ahc, devinfo);
+					ahc->msgout_index = 0;
+					response = TRUE;
+				}
+			}
+			done = MSGLOOP_MSGCOMPLETE;
+			break;
+		}
+		case MSG_EXT_PPR:
+		{
+			struct	ahc_syncrate *syncrate;
+			u_int	period;
+			u_int	offset;
+			u_int	bus_width;
+			u_int	ppr_options;
+			u_int	saved_width;
+			u_int	saved_offset;
+			u_int	saved_ppr_options;
+
+			if (ahc->msgin_buf[1] != MSG_EXT_PPR_LEN) {
+				reject = TRUE;
+				break;
+			}
+
+			/*
+			 * Wait until we have all args before validating
+			 * and acting on this message.
+			 *
+			 * Add one to MSG_EXT_PPR_LEN to account for
+			 * the extended message preamble.
+			 */
+			if (ahc->msgin_index < (MSG_EXT_PPR_LEN + 1))
+				break;
+
+			period = ahc->msgin_buf[3];
+			offset = ahc->msgin_buf[5];
+			bus_width = ahc->msgin_buf[6];
+			saved_width = bus_width;
+			ppr_options = ahc->msgin_buf[7];
+			/*
+			 * According to the spec, a DT only
+			 * period factor with no DT option
+			 * set implies async.
+			 */
+			if ((ppr_options & MSG_EXT_PPR_DT_REQ) == 0
+			 && period == 9)
+				offset = 0;
+			saved_ppr_options = ppr_options;
+			saved_offset = offset;
+
+			/*
+			 * Mask out any options we don't support
+			 * on any controller.  Transfer options are
+			 * only available if we are negotiating wide.
+			 */
+			ppr_options &= MSG_EXT_PPR_DT_REQ;
+			if (bus_width == 0)
+				ppr_options = 0;
+
+			ahc_validate_width(ahc, tinfo, &bus_width,
+					   devinfo->role);
+			syncrate = ahc_devlimited_syncrate(ahc, tinfo, &period,
+							   &ppr_options,
+							   devinfo->role);
+			ahc_validate_offset(ahc, tinfo, syncrate,
+					    &offset, bus_width,
+					    devinfo->role);
+
+			if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_PPR, TRUE)) {
+				/*
+				 * If we are unable to do any of the
+				 * requested options (we went too low),
+				 * then we'll have to reject the message.
+				 */
+				if (saved_width > bus_width
+				 || saved_offset != offset
+				 || saved_ppr_options != ppr_options) {
+					reject = TRUE;
+					period = 0;
+					offset = 0;
+					bus_width = 0;
+					ppr_options = 0;
+					syncrate = NULL;
+				}
+			} else {
+				if (devinfo->role != ROLE_TARGET)
+					printf("(%s:%c:%d:%d): Target "
+					       "Initiated PPR\n",
+					       ahc_name(ahc), devinfo->channel,
+					       devinfo->target, devinfo->lun);
+				else
+					printf("(%s:%c:%d:%d): Initiator "
+					       "Initiated PPR\n",
+					       ahc_name(ahc), devinfo->channel,
+					       devinfo->target, devinfo->lun);
+				ahc->msgout_index = 0;
+				ahc->msgout_len = 0;
+				ahc_construct_ppr(ahc, devinfo, period, offset,
+						  bus_width, ppr_options);
+				ahc->msgout_index = 0;
+				response = TRUE;
+			}
+			if (bootverbose) {
+				printf("(%s:%c:%d:%d): Received PPR width %x, "
+				       "period %x, offset %x,options %x\n"
+				       "\tFiltered to width %x, period %x, "
+				       "offset %x, options %x\n",
+				       ahc_name(ahc), devinfo->channel,
+				       devinfo->target, devinfo->lun,
+				       saved_width, ahc->msgin_buf[3],
+				       saved_offset, saved_ppr_options,
+				       bus_width, period, offset, ppr_options);
+			}
+			ahc_set_width(ahc, devinfo, bus_width,
+				      AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
+				      /*paused*/TRUE);
+			ahc_set_syncrate(ahc, devinfo,
+					 syncrate, period,
+					 offset, ppr_options,
+					 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
+					 /*paused*/TRUE);
+			done = MSGLOOP_MSGCOMPLETE;
+			break;
+		}
+		default:
+			/* Unknown extended message.  Reject it. */
+			reject = TRUE;
+			break;
+		}
+		break;
+	}
+#ifdef AHC_TARGET_MODE
+	case MSG_BUS_DEV_RESET:
+		ahc_handle_devreset(ahc, devinfo,
+				    CAM_BDR_SENT,
+				    "Bus Device Reset Received",
+				    /*verbose_level*/0);
+		ahc_restart(ahc);
+		done = MSGLOOP_TERMINATED;
+		break;
+	case MSG_ABORT_TAG:
+	case MSG_ABORT:
+	case MSG_CLEAR_QUEUE:
+	{
+		int tag;
+
+		/* Target mode messages */
+		if (devinfo->role != ROLE_TARGET) {
+			reject = TRUE;
+			break;
+		}
+		tag = SCB_LIST_NULL;
+		if (ahc->msgin_buf[0] == MSG_ABORT_TAG)
+			tag = ahc_inb(ahc, INITIATOR_TAG);
+		ahc_abort_scbs(ahc, devinfo->target, devinfo->channel,
+			       devinfo->lun, tag, ROLE_TARGET,
+			       CAM_REQ_ABORTED);
+
+		tstate = ahc->enabled_targets[devinfo->our_scsiid];
+		if (tstate != NULL) {
+			struct ahc_tmode_lstate* lstate;
+
+			lstate = tstate->enabled_luns[devinfo->lun];
+			if (lstate != NULL) {
+				ahc_queue_lstate_event(ahc, lstate,
+						       devinfo->our_scsiid,
+						       ahc->msgin_buf[0],
+						       /*arg*/tag);
+				ahc_send_lstate_events(ahc, lstate);
+			}
+		}
+		ahc_restart(ahc);
+		done = MSGLOOP_TERMINATED;
+		break;
+	}
+#endif
+	case MSG_TERM_IO_PROC:
+	default:
+		reject = TRUE;
+		break;
+	}
+
+	if (reject) {
+		/*
+		 * Setup to reject the message.
+		 */
+		ahc->msgout_index = 0;
+		ahc->msgout_len = 1;
+		ahc->msgout_buf[0] = MSG_MESSAGE_REJECT;
+		done = MSGLOOP_MSGCOMPLETE;
+		response = TRUE;
+	}
+
+	if (done != MSGLOOP_IN_PROG && !response)
+		/* Clear the outgoing message buffer */
+		ahc->msgout_len = 0;
+
+	return (done);
+}
+
+/*
+ * Process a message reject message.
+ */
+static int
+ahc_handle_msg_reject(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
+{
+	/*
+	 * What we care about here is if we had an
+	 * outstanding SDTR or WDTR message for this
+	 * target.  If we did, this is a signal that
+	 * the target is refusing negotiation.
+	 */
+	struct scb *scb;
+	struct ahc_initiator_tinfo *tinfo;
+	struct ahc_tmode_tstate *tstate;
+	u_int scb_index;
+	u_int last_msg;
+	int   response = 0;
+
+	scb_index = ahc_inb(ahc, SCB_TAG);
+	scb = ahc_lookup_scb(ahc, scb_index);
+	tinfo = ahc_fetch_transinfo(ahc, devinfo->channel,
+				    devinfo->our_scsiid,
+				    devinfo->target, &tstate);
+	/* Might be necessary */
+	last_msg = ahc_inb(ahc, LAST_MSG);
+
+	if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_PPR, /*full*/FALSE)) {
+		/*
+		 * Target does not support the PPR message.
+		 * Attempt to negotiate SPI-2 style.
+		 */
+		if (bootverbose) {
+			printf("(%s:%c:%d:%d): PPR Rejected. "
+			       "Trying WDTR/SDTR\n",
+			       ahc_name(ahc), devinfo->channel,
+			       devinfo->target, devinfo->lun);
+		}
+		tinfo->goal.ppr_options = 0;
+		tinfo->curr.transport_version = 2;
+		tinfo->goal.transport_version = 2;
+		ahc->msgout_index = 0;
+		ahc->msgout_len = 0;
+		ahc_build_transfer_msg(ahc, devinfo);
+		ahc->msgout_index = 0;
+		response = 1;
+	} else if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_WDTR, /*full*/FALSE)) {
+
+		/* note 8bit xfers */
+		printf("(%s:%c:%d:%d): refuses WIDE negotiation.  Using "
+		       "8bit transfers\n", ahc_name(ahc),
+		       devinfo->channel, devinfo->target, devinfo->lun);
+		ahc_set_width(ahc, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
+			      AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
+			      /*paused*/TRUE);
+		/*
+		 * No need to clear the sync rate.  If the target
+		 * did not accept the command, our syncrate is
+		 * unaffected.  If the target started the negotiation,
+		 * but rejected our response, we already cleared the
+		 * sync rate before sending our WDTR.
+		 */
+		if (tinfo->goal.offset != tinfo->curr.offset) {
+
+			/* Start the sync negotiation */
+			ahc->msgout_index = 0;
+			ahc->msgout_len = 0;
+			ahc_build_transfer_msg(ahc, devinfo);
+			ahc->msgout_index = 0;
+			response = 1;
+		}
+	} else if (ahc_sent_msg(ahc, AHCMSG_EXT, MSG_EXT_SDTR, /*full*/FALSE)) {
+		/* note asynch xfers and clear flag */
+		ahc_set_syncrate(ahc, devinfo, /*syncrate*/NULL, /*period*/0,
+				 /*offset*/0, /*ppr_options*/0,
+				 AHC_TRANS_ACTIVE|AHC_TRANS_GOAL,
+				 /*paused*/TRUE);
+		printf("(%s:%c:%d:%d): refuses synchronous negotiation. "
+		       "Using asynchronous transfers\n",
+		       ahc_name(ahc), devinfo->channel,
+		       devinfo->target, devinfo->lun);
+	} else if ((scb->hscb->control & MSG_SIMPLE_TASK) != 0) {
+		int tag_type;
+		int mask;
+
+		tag_type = (scb->hscb->control & MSG_SIMPLE_TASK);
+
+		if (tag_type == MSG_SIMPLE_TASK) {
+			printf("(%s:%c:%d:%d): refuses tagged commands.  "
+			       "Performing non-tagged I/O\n", ahc_name(ahc),
+			       devinfo->channel, devinfo->target, devinfo->lun);
+			ahc_set_tags(ahc, devinfo, AHC_QUEUE_NONE);
+			mask = ~0x23;
+		} else {
+			printf("(%s:%c:%d:%d): refuses %s tagged commands.  "
+			       "Performing simple queue tagged I/O only\n",
+			       ahc_name(ahc), devinfo->channel, devinfo->target,
+			       devinfo->lun, tag_type == MSG_ORDERED_TASK
+			       ? "ordered" : "head of queue");
+			ahc_set_tags(ahc, devinfo, AHC_QUEUE_BASIC);
+			mask = ~0x03;
+		}
+
+		/*
+		 * Resend the identify for this CCB as the target
+		 * may believe that the selection is invalid otherwise.
+		 */
+		ahc_outb(ahc, SCB_CONTROL,
+			 ahc_inb(ahc, SCB_CONTROL) & mask);
+	 	scb->hscb->control &= mask;
+		ahc_set_transaction_tag(scb, /*enabled*/FALSE,
+					/*type*/MSG_SIMPLE_TASK);
+		ahc_outb(ahc, MSG_OUT, MSG_IDENTIFYFLAG);
+		ahc_assert_atn(ahc);
+
+		/*
+		 * This transaction is now at the head of
+		 * the untagged queue for this target.
+		 */
+		if ((ahc->flags & AHC_SCB_BTT) == 0) {
+			struct scb_tailq *untagged_q;
+
+			untagged_q =
+			    &(ahc->untagged_queues[devinfo->target_offset]);
+			TAILQ_INSERT_HEAD(untagged_q, scb, links.tqe);
+			scb->flags |= SCB_UNTAGGEDQ;
+		}
+		ahc_busy_tcl(ahc, BUILD_TCL(scb->hscb->scsiid, devinfo->lun),
+			     scb->hscb->tag);
+
+		/*
+		 * Requeue all tagged commands for this target
+		 * currently in our possession so they can be
+		 * converted to untagged commands.
+		 */
+		ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb),
+				   SCB_GET_CHANNEL(ahc, scb),
+				   SCB_GET_LUN(scb), /*tag*/SCB_LIST_NULL,
+				   ROLE_INITIATOR, CAM_REQUEUE_REQ,
+				   SEARCH_COMPLETE);
+	} else {
+		/*
+		 * Otherwise, we ignore it.
+		 */
+		printf("%s:%c:%d: Message reject for %x -- ignored\n",
+		       ahc_name(ahc), devinfo->channel, devinfo->target,
+		       last_msg);
+	}
+	return (response);
+}
+
+/*
+ * Process an ingnore wide residue message.
+ */
+static void
+ahc_handle_ign_wide_residue(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
+{
+	u_int scb_index;
+	struct scb *scb;
+
+	scb_index = ahc_inb(ahc, SCB_TAG);
+	scb = ahc_lookup_scb(ahc, scb_index);
+	/*
+	 * XXX Actually check data direction in the sequencer?
+	 * Perhaps add datadir to some spare bits in the hscb?
+	 */
+	if ((ahc_inb(ahc, SEQ_FLAGS) & DPHASE) == 0
+	 || ahc_get_transfer_dir(scb) != CAM_DIR_IN) {
+		/*
+		 * Ignore the message if we haven't
+		 * seen an appropriate data phase yet.
+		 */
+	} else {
+		/*
+		 * If the residual occurred on the last
+		 * transfer and the transfer request was
+		 * expected to end on an odd count, do
+		 * nothing.  Otherwise, subtract a byte
+		 * and update the residual count accordingly.
+		 */
+		uint32_t sgptr;
+
+		sgptr = ahc_inb(ahc, SCB_RESIDUAL_SGPTR);
+		if ((sgptr & SG_LIST_NULL) != 0
+		 && ahc_inb(ahc, DATA_COUNT_ODD) == 1) {
+			/*
+			 * If the residual occurred on the last
+			 * transfer and the transfer request was
+			 * expected to end on an odd count, do
+			 * nothing.
+			 */
+		} else {
+			struct ahc_dma_seg *sg;
+			uint32_t data_cnt;
+			uint32_t data_addr;
+			uint32_t sglen;
+
+			/* Pull in the rest of the sgptr */
+			sgptr |= (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 3) << 24)
+			      | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 2) << 16)
+			      | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 1) << 8);
+			sgptr &= SG_PTR_MASK;
+			data_cnt = (ahc_inb(ahc, SCB_RESIDUAL_DATACNT+3) << 24)
+				 | (ahc_inb(ahc, SCB_RESIDUAL_DATACNT+2) << 16)
+				 | (ahc_inb(ahc, SCB_RESIDUAL_DATACNT+1) << 8)
+				 | (ahc_inb(ahc, SCB_RESIDUAL_DATACNT));
+
+			data_addr = (ahc_inb(ahc, SHADDR + 3) << 24)
+				  | (ahc_inb(ahc, SHADDR + 2) << 16)
+				  | (ahc_inb(ahc, SHADDR + 1) << 8)
+				  | (ahc_inb(ahc, SHADDR));
+
+			data_cnt += 1;
+			data_addr -= 1;
+
+			sg = ahc_sg_bus_to_virt(scb, sgptr);
+			/*
+			 * The residual sg ptr points to the next S/G
+			 * to load so we must go back one.
+			 */
+			sg--;
+			sglen = ahc_le32toh(sg->len) & AHC_SG_LEN_MASK;
+			if (sg != scb->sg_list
+			 && sglen < (data_cnt & AHC_SG_LEN_MASK)) {
+
+				sg--;
+				sglen = ahc_le32toh(sg->len);
+				/*
+				 * Preserve High Address and SG_LIST bits
+				 * while setting the count to 1.
+				 */
+				data_cnt = 1 | (sglen & (~AHC_SG_LEN_MASK));
+				data_addr = ahc_le32toh(sg->addr)
+					  + (sglen & AHC_SG_LEN_MASK) - 1;
+
+				/*
+				 * Increment sg so it points to the
+				 * "next" sg.
+				 */
+				sg++;
+				sgptr = ahc_sg_virt_to_bus(scb, sg);
+				ahc_outb(ahc, SCB_RESIDUAL_SGPTR + 3,
+					 sgptr >> 24);
+				ahc_outb(ahc, SCB_RESIDUAL_SGPTR + 2,
+					 sgptr >> 16);
+				ahc_outb(ahc, SCB_RESIDUAL_SGPTR + 1,
+					 sgptr >> 8);
+				ahc_outb(ahc, SCB_RESIDUAL_SGPTR, sgptr);
+			}
+
+			ahc_outb(ahc, SCB_RESIDUAL_DATACNT + 3, data_cnt >> 24);
+			ahc_outb(ahc, SCB_RESIDUAL_DATACNT + 2, data_cnt >> 16);
+			ahc_outb(ahc, SCB_RESIDUAL_DATACNT + 1, data_cnt >> 8);
+			ahc_outb(ahc, SCB_RESIDUAL_DATACNT, data_cnt);
+		}
+	}
+}
+
+
+/*
+ * Reinitialize the data pointers for the active transfer
+ * based on its current residual.
+ */
+static void
+ahc_reinitialize_dataptrs(struct ahc_softc *ahc)
+{
+	struct	 scb *scb;
+	struct	 ahc_dma_seg *sg;
+	u_int	 scb_index;
+	uint32_t sgptr;
+	uint32_t resid;
+	uint32_t dataptr;
+
+	scb_index = ahc_inb(ahc, SCB_TAG);
+	scb = ahc_lookup_scb(ahc, scb_index);
+	sgptr = (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 3) << 24)
+	      | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 2) << 16)
+	      | (ahc_inb(ahc, SCB_RESIDUAL_SGPTR + 1) << 8)
+	      |	ahc_inb(ahc, SCB_RESIDUAL_SGPTR);
+
+	sgptr &= SG_PTR_MASK;
+	sg = ahc_sg_bus_to_virt(scb, sgptr);
+
+	/* The residual sg_ptr always points to the next sg */
+	sg--;
+
+	resid = (ahc_inb(ahc, SCB_RESIDUAL_DATACNT + 2) << 16)
+	      | (ahc_inb(ahc, SCB_RESIDUAL_DATACNT + 1) << 8)
+	      | ahc_inb(ahc, SCB_RESIDUAL_DATACNT);
+
+	dataptr = ahc_le32toh(sg->addr)
+		+ (ahc_le32toh(sg->len) & AHC_SG_LEN_MASK)
+		- resid;
+	if ((ahc->flags & AHC_39BIT_ADDRESSING) != 0) {
+		u_int dscommand1;
+
+		dscommand1 = ahc_inb(ahc, DSCOMMAND1);
+		ahc_outb(ahc, DSCOMMAND1, dscommand1 | HADDLDSEL0);
+		ahc_outb(ahc, HADDR,
+			 (ahc_le32toh(sg->len) >> 24) & SG_HIGH_ADDR_BITS);
+		ahc_outb(ahc, DSCOMMAND1, dscommand1);
+	}
+	ahc_outb(ahc, HADDR + 3, dataptr >> 24);
+	ahc_outb(ahc, HADDR + 2, dataptr >> 16);
+	ahc_outb(ahc, HADDR + 1, dataptr >> 8);
+	ahc_outb(ahc, HADDR, dataptr);
+	ahc_outb(ahc, HCNT + 2, resid >> 16);
+	ahc_outb(ahc, HCNT + 1, resid >> 8);
+	ahc_outb(ahc, HCNT, resid);
+	if ((ahc->features & AHC_ULTRA2) == 0) {
+		ahc_outb(ahc, STCNT + 2, resid >> 16);
+		ahc_outb(ahc, STCNT + 1, resid >> 8);
+		ahc_outb(ahc, STCNT, resid);
+	}
+}
+
+/*
+ * Handle the effects of issuing a bus device reset message.
+ */
+static void
+ahc_handle_devreset(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
+		    cam_status status, char *message, int verbose_level)
+{
+#ifdef AHC_TARGET_MODE
+	struct ahc_tmode_tstate* tstate;
+	u_int lun;
+#endif
+	int found;
+
+	found = ahc_abort_scbs(ahc, devinfo->target, devinfo->channel,
+			       CAM_LUN_WILDCARD, SCB_LIST_NULL, devinfo->role,
+			       status);
+
+#ifdef AHC_TARGET_MODE
+	/*
+	 * Send an immediate notify ccb to all target mord peripheral
+	 * drivers affected by this action.
+	 */
+	tstate = ahc->enabled_targets[devinfo->our_scsiid];
+	if (tstate != NULL) {
+		for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
+			struct ahc_tmode_lstate* lstate;
+
+			lstate = tstate->enabled_luns[lun];
+			if (lstate == NULL)
+				continue;
+
+			ahc_queue_lstate_event(ahc, lstate, devinfo->our_scsiid,
+					       MSG_BUS_DEV_RESET, /*arg*/0);
+			ahc_send_lstate_events(ahc, lstate);
+		}
+	}
+#endif
+
+	/*
+	 * Go back to async/narrow transfers and renegotiate.
+	 */
+	ahc_set_width(ahc, devinfo, MSG_EXT_WDTR_BUS_8_BIT,
+		      AHC_TRANS_CUR, /*paused*/TRUE);
+	ahc_set_syncrate(ahc, devinfo, /*syncrate*/NULL,
+			 /*period*/0, /*offset*/0, /*ppr_options*/0,
+			 AHC_TRANS_CUR, /*paused*/TRUE);
+	
+	ahc_send_async(ahc, devinfo->channel, devinfo->target,
+	  CAM_LUN_WILDCARD, AC_SENT_BDR, NULL);
+
+	if (message != NULL
+	 && (verbose_level <= bootverbose))
+		printf("%s: %s on %c:%d. %d SCBs aborted\n", ahc_name(ahc),
+		       message, devinfo->channel, devinfo->target, found);
+}
+
+#ifdef AHC_TARGET_MODE
+static void
+ahc_setup_target_msgin(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
+		       struct scb *scb)
+{
+
+	/*              
+	 * To facilitate adding multiple messages together,
+	 * each routine should increment the index and len
+	 * variables instead of setting them explicitly.
+	 */             
+	ahc->msgout_index = 0;
+	ahc->msgout_len = 0;
+
+	if (scb != NULL && (scb->flags & SCB_AUTO_NEGOTIATE) != 0)
+		ahc_build_transfer_msg(ahc, devinfo);
+	else
+		panic("ahc_intr: AWAITING target message with no message");
+
+	ahc->msgout_index = 0;
+	ahc->msg_type = MSG_TYPE_TARGET_MSGIN;
+}
+#endif
+
+int
+ahc_softc_init(struct ahc_softc *ahc)
+{
+
+	/* The IRQMS bit is only valid on VL and EISA chips */
+	if ((ahc->chip & AHC_PCI) == 0)
+		ahc->unpause = ahc_inb(ahc, HCNTRL) & IRQMS;
+	else
+		ahc->unpause = 0;
+	ahc->pause = ahc->unpause | PAUSE; 
+	/* XXX The shared scb data stuff should be deprecated */
+	if (ahc->scb_data == NULL) {
+		ahc->scb_data = malloc(sizeof(*ahc->scb_data),
+				       M_DEVBUF, M_NOWAIT);
+		if (ahc->scb_data == NULL)
+			return (ENOMEM);
+		memset(ahc->scb_data, 0, sizeof(*ahc->scb_data));
+	}
+
+	return (0);
+}
+
+void
+ahc_softc_insert(struct ahc_softc *ahc)
+{
+	struct ahc_softc *list_ahc;
+
+#if AHC_PCI_CONFIG > 0
+	/*
+	 * Second Function PCI devices need to inherit some
+	 * settings from function 0.
+	 */
+	if ((ahc->chip & AHC_BUS_MASK) == AHC_PCI
+	 && (ahc->features & AHC_MULTI_FUNC) != 0) {
+		TAILQ_FOREACH(list_ahc, &ahc_tailq, links) {
+			ahc_dev_softc_t list_pci;
+			ahc_dev_softc_t pci;
+
+			list_pci = list_ahc->dev_softc;
+			pci = ahc->dev_softc;
+			if (ahc_get_pci_slot(list_pci) == ahc_get_pci_slot(pci)
+			 && ahc_get_pci_bus(list_pci) == ahc_get_pci_bus(pci)) {
+				struct ahc_softc *master;
+				struct ahc_softc *slave;
+
+				if (ahc_get_pci_function(list_pci) == 0) {
+					master = list_ahc;
+					slave = ahc;
+				} else {
+					master = ahc;
+					slave = list_ahc;
+				}
+				slave->flags &= ~AHC_BIOS_ENABLED; 
+				slave->flags |=
+				    master->flags & AHC_BIOS_ENABLED;
+				slave->flags &= ~AHC_PRIMARY_CHANNEL; 
+				slave->flags |=
+				    master->flags & AHC_PRIMARY_CHANNEL;
+				break;
+			}
+		}
+	}
+#endif
+
+	/*
+	 * Insertion sort into our list of softcs.
+	 */
+	list_ahc = TAILQ_FIRST(&ahc_tailq);
+	while (list_ahc != NULL
+	    && ahc_softc_comp(list_ahc, ahc) <= 0)
+		list_ahc = TAILQ_NEXT(list_ahc, links);
+	if (list_ahc != NULL)
+		TAILQ_INSERT_BEFORE(list_ahc, ahc, links);
+	else
+		TAILQ_INSERT_TAIL(&ahc_tailq, ahc, links);
+	ahc->init_level++;
+}
+
+/*
+ * Verify that the passed in softc pointer is for a
+ * controller that is still configured.
+ */
+struct ahc_softc *
+ahc_find_softc(struct ahc_softc *ahc)
+{
+	struct ahc_softc *list_ahc;
+
+	TAILQ_FOREACH(list_ahc, &ahc_tailq, links) {
+		if (list_ahc == ahc)
+			return (ahc);
+	}
+	return (NULL);
+}
+
+void
+ahc_set_unit(struct ahc_softc *ahc, int unit)
+{
+	ahc->unit = unit;
+}
+
+void
+ahc_set_name(struct ahc_softc *ahc, char *name)
+{
+	if (ahc->name != NULL)
+		free(ahc->name, M_DEVBUF);
+	ahc->name = name;
+}
+
+void
+ahc_free(struct ahc_softc *ahc)
+{
+	int i;
+
+	ahc_fini_scbdata(ahc);
+	switch (ahc->init_level) {
+	default:
+	case 2:
+		ahc_shutdown(ahc);
+		/* TAILQ_REMOVE(&ahc_tailq, ahc, links); XXX */
+		/* FALLTHROUGH */
+	case 1:
+		bus_dmamap_unload(ahc->parent_dmat, ahc->shared_data_dmamap);
+		bus_dmamap_destroy(ahc->parent_dmat, ahc->shared_data_dmamap);
+		bus_dmamem_unmap(ahc->parent_dmat, (caddr_t)ahc->qoutfifo, ahc->shared_data_size);
+		bus_dmamem_free(ahc->parent_dmat, &ahc->shared_data_seg, ahc->shared_data_nseg);
+		break;
+	case 0:
+		break;
+	}
+
+	ahc_platform_free(ahc);
+	for (i = 0; i < AHC_NUM_TARGETS; i++) {
+		struct ahc_tmode_tstate *tstate;
+
+		tstate = ahc->enabled_targets[i];
+		if (tstate != NULL) {
+#if AHC_TARGET_MODE
+			int j;
+
+			for (j = 0; j < AHC_NUM_LUNS; j++) {
+				struct ahc_tmode_lstate *lstate;
+
+				lstate = tstate->enabled_luns[j];
+				if (lstate != NULL) {
+					  /*xpt_free_path(lstate->path);*/
+					free(lstate, M_DEVBUF);
+				}
+			}
+#endif
+			free(tstate, M_DEVBUF);
+		}
+	}
+#if AHC_TARGET_MODE
+	if (ahc->black_hole != NULL) {
+	  /*xpt_free_path(ahc->black_hole->path);*/
+		free(ahc->black_hole, M_DEVBUF);
+	}
+#endif
+#ifndef __NetBSD__
+	if (ahc->name != NULL)
+		free(ahc->name, M_DEVBUF);
+#endif
+	if (ahc->seep_config != NULL)
+		free(ahc->seep_config, M_DEVBUF);
+#ifndef __FreeBSD__
+	free(ahc, M_DEVBUF);
+#endif
+	return;
+}
+
+void
+ahc_shutdown(void *arg)
+{
+	struct	ahc_softc *ahc;
+	int	i;
+
+	ahc = (struct ahc_softc *)arg;
+
+	/* This will reset most registers to 0, but not all */
+	ahc_reset(ahc);
+	ahc_outb(ahc, SCSISEQ, 0);
+	ahc_outb(ahc, SXFRCTL0, 0);
+	ahc_outb(ahc, DSPCISTATUS, 0);
+
+	for (i = TARG_SCSIRATE; i < SCSICONF; i++)
+		ahc_outb(ahc, i, 0);
+}
+
+/*
+ * Reset the controller and record some information about it
+ * that is only available just after a reset.
+ */
+int
+ahc_reset(struct ahc_softc *ahc)
+{
+	u_int	sblkctl;
+	u_int	sxfrctl1_a, sxfrctl1_b;
+	int	wait;
+	
+	/*
+	 * Preserve the value of the SXFRCTL1 register for all channels.
+	 * It contains settings that affect termination and we don't want
+	 * to disturb the integrity of the bus.
+	 */
+	ahc_pause(ahc);
+	if ((ahc_inb(ahc, HCNTRL) & CHIPRST) != 0) {
+		/*
+		 * The chip has not been initialized since
+		 * PCI/EISA/VLB bus reset.  Don't trust
+		 * "left over BIOS data".
+		 */
+		ahc->flags |= AHC_NO_BIOS_INIT;
+	}
+	sxfrctl1_b = 0;
+	if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7770) {
+		u_int sblkctl;
+
+		/*
+		 * Save channel B's settings in case this chip
+		 * is setup for TWIN channel operation.
+		 */
+		sblkctl = ahc_inb(ahc, SBLKCTL);
+		ahc_outb(ahc, SBLKCTL, sblkctl | SELBUSB);
+		sxfrctl1_b = ahc_inb(ahc, SXFRCTL1);
+		ahc_outb(ahc, SBLKCTL, sblkctl & ~SELBUSB);
+	}
+	sxfrctl1_a = ahc_inb(ahc, SXFRCTL1);
+
+	ahc_outb(ahc, HCNTRL, CHIPRST | ahc->pause);
+
+	/*
+	 * Ensure that the reset has finished.  We delay 1000us
+	 * prior to reading the register to make sure the chip
+	 * has sufficiently completed its reset to handle register
+	 * accesses.
+	 */
+	wait = 1000;
+	do {
+		ahc_delay(1000);
+	} while (--wait && !(ahc_inb(ahc, HCNTRL) & CHIPRSTACK));
+
+	if (wait == 0) {
+		printf("%s: WARNING - Failed chip reset!  "
+		       "Trying to initialize anyway.\n", ahc_name(ahc));
+	}
+	ahc_outb(ahc, HCNTRL, ahc->pause);
+
+	/* Determine channel configuration */
+	sblkctl = ahc_inb(ahc, SBLKCTL) & (SELBUSB|SELWIDE);
+	/* No Twin Channel PCI cards */
+	if ((ahc->chip & AHC_PCI) != 0)
+		sblkctl &= ~SELBUSB;
+	switch (sblkctl) {
+	case 0:
+		/* Single Narrow Channel */
+		break;
+	case 2:
+		/* Wide Channel */
+		ahc->features |= AHC_WIDE;
+		break;
+	case 8:
+		/* Twin Channel */
+		ahc->features |= AHC_TWIN;
+		break;
+	default:
+		printf(" Unsupported adapter type (0x%x).  Ignoring\n", sblkctl);
+		return(-1);
+	}
+
+	/*
+	 * Reload sxfrctl1.
+	 *
+	 * We must always initialize STPWEN to 1 before we
+	 * restore the saved values.  STPWEN is initialized
+	 * to a tri-state condition which can only be cleared
+	 * by turning it on.
+	 */
+	if ((ahc->features & AHC_TWIN) != 0) {
+		u_int sblkctl;
+
+		sblkctl = ahc_inb(ahc, SBLKCTL);
+		ahc_outb(ahc, SBLKCTL, sblkctl | SELBUSB);
+		ahc_outb(ahc, SXFRCTL1, sxfrctl1_b);
+		ahc_outb(ahc, SBLKCTL, sblkctl & ~SELBUSB);
+	}
+	ahc_outb(ahc, SXFRCTL1, sxfrctl1_a);
+
+#ifdef AHC_DUMP_SEQ
+	if (ahc->init_level == 0)
+		ahc_dumpseq(ahc);
+#endif
+
+	return (0);
+}
+
+/*
+ * Determine the number of SCBs available on the controller
+ */
+int
+ahc_probe_scbs(struct ahc_softc *ahc) {
+	int i;
+
+	for (i = 0; i < AHC_SCB_MAX; i++) {
+
+		ahc_outb(ahc, SCBPTR, i);
+		ahc_outb(ahc, SCB_BASE, i);
+		if (ahc_inb(ahc, SCB_BASE) != i)
+			break;
+		ahc_outb(ahc, SCBPTR, 0);
+		if (ahc_inb(ahc, SCB_BASE) != 0)
+			break;
+	}
+	return (i);
+}
+
+#if 0
+static void
+ahc_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error) 
+{
+	bus_addr_t *baddr;
+
+	baddr = (bus_addr_t *)arg;
+	*baddr = segs->ds_addr;
+}
+#endif
+
+static void
+ahc_build_free_scb_list(struct ahc_softc *ahc)
+{
+	int scbsize;
+	int i;
+
+	scbsize = 32;
+	if ((ahc->flags & AHC_LSCBS_ENABLED) != 0)
+		scbsize = 64;
+
+	for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
+		int j;
+
+		ahc_outb(ahc, SCBPTR, i);
+
+		/*
+		 * Touch all SCB bytes to avoid parity errors
+		 * should one of our debugging routines read
+		 * an otherwise uninitiatlized byte.
+		 */
+		for (j = 0; j < scbsize; j++)
+			ahc_outb(ahc, SCB_BASE+j, 0xFF);
+
+		/* Clear the control byte. */
+		ahc_outb(ahc, SCB_CONTROL, 0);
+
+		/* Set the next pointer */
+		if ((ahc->flags & AHC_PAGESCBS) != 0)
+			ahc_outb(ahc, SCB_NEXT, i+1);
+		else 
+			ahc_outb(ahc, SCB_NEXT, SCB_LIST_NULL);
+
+		/* Make the tag number, SCSIID, and lun invalid */
+		ahc_outb(ahc, SCB_TAG, SCB_LIST_NULL);
+		ahc_outb(ahc, SCB_SCSIID, 0xFF);
+		ahc_outb(ahc, SCB_LUN, 0xFF);
+	}
+
+	/* Make sure that the last SCB terminates the free list */
+	ahc_outb(ahc, SCBPTR, i-1);
+	ahc_outb(ahc, SCB_NEXT, SCB_LIST_NULL);
+}
+
+static int
+ahc_init_scbdata(struct ahc_softc *ahc)
+{
+	struct scb_data *scb_data;
+
+	scb_data = ahc->scb_data;
+	SLIST_INIT(&scb_data->free_scbs);
+	SLIST_INIT(&scb_data->sg_maps);
+
+	/* Allocate SCB resources */
+	scb_data->scbarray =
+	    (struct scb *)malloc(sizeof(struct scb) * AHC_SCB_MAX_ALLOC,
+				 M_DEVBUF, M_NOWAIT);
+	if (scb_data->scbarray == NULL)
+		return (ENOMEM);
+	memset(scb_data->scbarray, 0, sizeof(struct scb) * AHC_SCB_MAX_ALLOC);
+
+	/* Determine the number of hardware SCBs and initialize them */
+
+	scb_data->maxhscbs = ahc_probe_scbs(ahc);
+	if ((ahc->flags & AHC_PAGESCBS) != 0) {
+		/* SCB 0 heads the free list */
+		ahc_outb(ahc, FREE_SCBH, 0);
+	} else {
+		ahc_outb(ahc, FREE_SCBH, SCB_LIST_NULL);
+	}
+
+	if (ahc->scb_data->maxhscbs == 0) {
+		printf("%s: No SCB space found\n", ahc_name(ahc));
+		return (ENXIO);
+	}
+
+	ahc_build_free_scb_list(ahc);
+
+	/*
+	 * Create our DMA tags.  These tags define the kinds of device
+	 * accessible memory allocations and memory mappings we will
+	 * need to perform during normal operation.
+	 *
+	 * Unless we need to further restrict the allocation, we rely
+	 * on the restrictions of the parent dmat, hence the common
+	 * use of MAXADDR and MAXSIZE.
+	 */
+
+	if (ahc_createdmamem(ahc->parent_dmat,
+	     AHC_SCB_MAX * sizeof(struct hardware_scb), ahc->sc_dmaflags,
+	     &scb_data->hscb_dmamap,
+	     (caddr_t *)&scb_data->hscbs, &scb_data->hscb_busaddr,
+	     &scb_data->hscb_seg, &scb_data->hscb_nseg, ahc_name(ahc),
+	     "hardware SCB structures") < 0)
+		goto error_exit;
+
+	scb_data->init_level++;
+
+	if (ahc_createdmamem(ahc->parent_dmat,
+	     AHC_SCB_MAX * sizeof(struct scsi_sense_data), ahc->sc_dmaflags,
+	     &scb_data->sense_dmamap, (caddr_t *)&scb_data->sense,
+	     &scb_data->sense_busaddr, &scb_data->sense_seg,
+	     &scb_data->sense_nseg, ahc_name(ahc), "sense buffers") < 0)
+		goto error_exit;
+
+	scb_data->init_level++;
+
+	/* Perform initial CCB allocation */
+	memset(scb_data->hscbs, 0,
+	       AHC_SCB_MAX_ALLOC * sizeof(struct hardware_scb));
+	ahc_alloc_scbs(ahc);
+	scb_data->init_level++;
+
+	if (scb_data->numscbs == 0) {
+		printf("%s: ahc_init_scbdata - "
+		       "Unable to allocate initial scbs\n",
+		       ahc_name(ahc));
+		goto error_exit;
+	}
+
+	/*
+	 * Tell the sequencer which SCB will be the next one it receives.
+	 */
+	ahc->next_queued_scb = ahc_get_scb(ahc);
+	ahc_outb(ahc, NEXT_QUEUED_SCB, ahc->next_queued_scb->hscb->tag);
+
+	/*
+	 * Note that we were successfull
+	 */
+	return (0); 
+
+error_exit:
+
+	return (ENOMEM);
+}
+
+static void
+ahc_fini_scbdata(struct ahc_softc *ahc)
+{
+	struct scb_data *scb_data;
+
+	scb_data = ahc->scb_data;
+	if (scb_data == NULL)
+		return;
+
+	switch (scb_data->init_level) {
+	default:
+	case 5:
+	{
+		struct sg_map_node *sg_map;
+
+		while ((sg_map = SLIST_FIRST(&scb_data->sg_maps))!= NULL) {
+			SLIST_REMOVE_HEAD(&scb_data->sg_maps, links);
+			ahc_freedmamem(ahc->parent_dmat, PAGE_SIZE,
+			    sg_map->sg_dmamap, (caddr_t)sg_map->sg_vaddr,
+			    &sg_map->sg_dmasegs, sg_map->sg_nseg);
+			free(sg_map, M_DEVBUF);
+		}
+	}
+	/*FALLTHROUGH*/
+	case 4:
+		ahc_freedmamem(ahc->parent_dmat,
+		    AHC_SCB_MAX * sizeof(struct scsipi_sense_data),
+		    scb_data->sense_dmamap, (caddr_t)scb_data->sense,
+		    &scb_data->sense_seg, scb_data->sense_nseg);
+	/*FALLTHROUGH*/
+	case 3:
+		ahc_freedmamem(ahc->parent_dmat,
+		    AHC_SCB_MAX * sizeof(struct hardware_scb),
+		    scb_data->hscb_dmamap, (caddr_t)scb_data->hscbs,
+		    &scb_data->hscb_seg, scb_data->hscb_nseg);
+	/*FALLTHROUGH*/
+	case 2:
+	case 1:
+	case 0:
+		break;
+	}
+	if (scb_data->scbarray != NULL)
+		free(scb_data->scbarray, M_DEVBUF);
+}
+
+void
+ahc_alloc_scbs(struct ahc_softc *ahc)
+{
+	struct scb_data *scb_data;
+	struct scb *next_scb;
+	struct sg_map_node *sg_map;
+	bus_addr_t physaddr;
+	struct ahc_dma_seg *segs;
+	int newcount;
+	int i;
+
+	scb_data = ahc->scb_data;
+	if (scb_data->numscbs >= AHC_SCB_MAX_ALLOC)
+		/* Can't allocate any more */
+		return;
+
+	next_scb = &scb_data->scbarray[scb_data->numscbs];
+
+	sg_map = malloc(sizeof(*sg_map), M_DEVBUF, M_NOWAIT);
+
+	if (sg_map == NULL)
+		return;
+
+	/* Allocate S/G space for the next batch of SCBS */
+	if (ahc_createdmamem(ahc->parent_dmat, PAGE_SIZE, ahc->sc_dmaflags,
+			     &sg_map->sg_dmamap,
+			     (caddr_t *)&sg_map->sg_vaddr, &sg_map->sg_physaddr,
+			     &sg_map->sg_dmasegs, &sg_map->sg_nseg, ahc_name(ahc),
+			     "SG space") < 0) {
+		free(sg_map, M_DEVBUF);
+		return;
+	}
+
+	SLIST_INSERT_HEAD(&scb_data->sg_maps, sg_map, links);
+
+	segs = sg_map->sg_vaddr;
+	physaddr = sg_map->sg_physaddr;
+
+	newcount = (PAGE_SIZE / (AHC_NSEG * sizeof(struct ahc_dma_seg)));
+	newcount = MIN(newcount, (AHC_SCB_MAX_ALLOC - scb_data->numscbs));
+	for (i = 0; i < newcount; i++) {
+		struct scb_platform_data *pdata = NULL;
+		int error;
+
+		if (sizeof(*pdata) > 0) { 
+			pdata = (struct scb_platform_data *)
+			    malloc(sizeof(*pdata), M_DEVBUF, M_NOWAIT);
+			if (pdata == NULL)
+				break;
+			bzero(pdata, sizeof(*pdata));
+		}
+
+		next_scb->platform_data = pdata;
+		next_scb->sg_map = sg_map;
+		next_scb->sg_list = segs;
+		/*
+		 * The sequencer always starts with the second entry.
+		 * The first entry is embedded in the scb.
+		 */
+		next_scb->sg_list_phys = physaddr + sizeof(struct ahc_dma_seg);
+		next_scb->ahc_softc = ahc;
+		next_scb->flags = SCB_FREE;
+
+		error = bus_dmamap_create(ahc->parent_dmat, 
+			  AHC_MAXTRANSFER_SIZE, AHC_NSEG, MAXPHYS, 0,
+			  BUS_DMA_NOWAIT|BUS_DMA_ALLOCNOW|ahc->sc_dmaflags,
+			  &next_scb->dmamap);
+		if (error != 0)
+			break;
+
+		next_scb->hscb = &scb_data->hscbs[scb_data->numscbs];
+		next_scb->hscb->tag = ahc->scb_data->numscbs;
+		SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs,
+				  next_scb, links.sle);
+		segs += AHC_NSEG;
+		physaddr += (AHC_NSEG * sizeof(struct ahc_dma_seg));
+		next_scb++;
+		ahc->scb_data->numscbs++;
+	}
+}
+
+void
+ahc_controller_info(struct ahc_softc *ahc, char *buf, size_t buf_len)
+{
+	int len = 0;
+
+	snprintf(buf + len, buf_len - len, "%s: ",
+		 ahc_chip_names[ahc->chip & AHC_CHIPID_MASK]);
+	len = strlen(buf);
+	if ((ahc->features & AHC_TWIN) != 0)
+		snprintf(buf + len, buf_len - len,
+			 "Twin Channel, A SCSI Id=%d, B SCSI Id=%d, "
+			 "primary %c, ", ahc->our_id, ahc->our_id_b,
+			 (ahc->flags & AHC_PRIMARY_CHANNEL) + 'A');
+	else {
+		const char *speed;
+		const char *type;
+
+		speed = "";
+		if ((ahc->features & AHC_ULTRA) != 0) {
+			speed = "Ultra ";
+		} else if ((ahc->features & AHC_DT) != 0) {
+			speed = "Ultra160 ";
+		} else if ((ahc->features & AHC_ULTRA2) != 0) {
+			speed = "Ultra2 ";
+		}
+		if ((ahc->features & AHC_WIDE) != 0) {
+			type = "Wide";
+		} else {
+			type = "Single";
+		}
+		snprintf(buf + len, buf_len - len,
+			 "%s%s Channel %c, SCSI Id=%d, ",
+			 speed, type, ahc->channel, ahc->our_id);
+	}
+	len = strlen(buf);
+
+	if ((ahc->flags & AHC_PAGESCBS) != 0)
+		snprintf(buf + len, buf_len - len, "%d/%d SCBs",
+			 ahc->scb_data->maxhscbs, AHC_SCB_MAX);
+	else
+		snprintf(buf + len, buf_len - len, "%d SCBs",
+			 ahc->scb_data->maxhscbs);
+}
+
+/*
+ * Start the board, ready for normal operation
+ */
+int
+ahc_init(struct ahc_softc *ahc)
+{
+	int	 max_targ;
+	int	 i;
+	int	 term;
+	u_int	 scsi_conf;
+	u_int	 scsiseq_template;
+	u_int	 ultraenb;
+	u_int	 discenable;
+	u_int	 tagenable;
+	size_t	 driver_data_size;
+	uint32_t physaddr;
+
+#ifdef AHC_DEBUG
+	if ((ahc_debug & AHC_DEBUG_SEQUENCER) != 0)
+		ahc->flags |= AHC_SEQUENCER_DEBUG;
+#endif
+
+#ifdef AHC_PRINT_SRAM
+	printf("Scratch Ram:");
+	for (i = 0x20; i < 0x5f; i++) {
+		if (((i % 8) == 0) && (i != 0)) {
+			printf ("\n              ");
+		}
+		printf (" 0x%x", ahc_inb(ahc, i));
+	}
+	if ((ahc->features & AHC_MORE_SRAM) != 0) {
+		for (i = 0x70; i < 0x7f; i++) {
+			if (((i % 8) == 0) && (i != 0)) {
+				printf ("\n              ");
+			}
+			printf (" 0x%x", ahc_inb(ahc, i));
+		}
+	}
+	printf ("\n");
+	/*
+	 * Reading uninitialized scratch ram may
+	 * generate parity errors.
+	 */
+	ahc_outb(ahc, CLRINT, CLRPARERR);
+	ahc_outb(ahc, CLRINT, CLRBRKADRINT);
+#endif
+	max_targ = 15;
+
+	/*
+	 * Assume we have a board at this stage and it has been reset.
+	 */
+	if ((ahc->flags & AHC_USEDEFAULTS) != 0)
+		ahc->our_id = ahc->our_id_b = 7;
+	
+	/*
+	 * Default to allowing initiator operations.
+	 */
+	ahc->flags |= AHC_INITIATORROLE;
+
+	/*
+	 * Only allow target mode features if this unit has them enabled.
+	 */
+	//if ((AHC_TMODE_ENABLE & (0x1 << ahc->unit)) == 0)
+		ahc->features &= ~AHC_TARGETMODE;
+
+	/*
+	 * DMA tag for our command fifos and other data in system memory
+	 * the card's sequencer must be able to access.  For initiator
+	 * roles, we need to allocate space for the qinfifo and qoutfifo.
+	 * The qinfifo and qoutfifo are composed of 256 1 byte elements. 
+	 * When providing for the target mode role, we must additionally
+	 * provide space for the incoming target command fifo and an extra
+	 * byte to deal with a DMA bug in some chip versions.
+	 */
+	driver_data_size = 2 * 256 * sizeof(uint8_t);
+	if ((ahc->features & AHC_TARGETMODE) != 0)
+		driver_data_size += AHC_TMODE_CMDS * sizeof(struct target_cmd)
+				 + /*DMA WideOdd Bug Buffer*/1;
+
+	if (ahc_createdmamem(ahc->parent_dmat, driver_data_size,
+			     ahc->sc_dmaflags,
+			     &ahc->shared_data_dmamap, (caddr_t *)&ahc->qoutfifo,
+			     &ahc->shared_data_busaddr, &ahc->shared_data_seg,
+			     &ahc->shared_data_nseg, ahc_name(ahc), "shared data") < 0)
+		return (ENOMEM);
+
+	ahc->init_level++;
+
+	if ((ahc->features & AHC_TARGETMODE) != 0) {
+		ahc->targetcmds = (struct target_cmd *)ahc->qoutfifo;
+		ahc->qoutfifo = (uint8_t *)&ahc->targetcmds[AHC_TMODE_CMDS];
+		ahc->dma_bug_buf = ahc->shared_data_busaddr
+				 + driver_data_size - 1;
+		/* All target command blocks start out invalid. */
+		for (i = 0; i < AHC_TMODE_CMDS; i++)
+			ahc->targetcmds[i].cmd_valid = 0;
+		ahc_sync_tqinfifo(ahc, BUS_DMASYNC_PREREAD);
+		ahc->tqinfifonext = 1;
+		ahc_outb(ahc, KERNEL_TQINPOS, ahc->tqinfifonext - 1);
+		ahc_outb(ahc, TQINPOS, ahc->tqinfifonext);
+		ahc->qoutfifo = (uint8_t *)&ahc->targetcmds[256];
+	}
+	ahc->qinfifo = &ahc->qoutfifo[256];
+
+	ahc->init_level++;
+
+	/* Allocate SCB data now that buffer_dmat is initialized */
+	if (ahc->scb_data->maxhscbs == 0)
+		if (ahc_init_scbdata(ahc) != 0)
+		  return (ENOMEM);
+
+	if (bootverbose)
+		printf("%s: found %d SCBs\n", ahc_name(ahc),
+		    ahc->scb_data->maxhscbs);
+
+	/*
+	 * Allocate a tstate to house information for our
+	 * initiator presence on the bus as well as the user
+	 * data for any target mode initiator.
+	 */
+	if (ahc_alloc_tstate(ahc, ahc->our_id, 'A') == NULL) {
+		printf("%s: unable to allocate ahc_tmode_tstate.  "
+		       "Failing attach\n", ahc_name(ahc));
+		return (ENOMEM);
+	}
+
+	if ((ahc->features & AHC_TWIN) != 0) {
+		if (ahc_alloc_tstate(ahc, ahc->our_id_b, 'B') == NULL) {
+			printf("%s: unable to allocate ahc_tmode_tstate.  "
+			       "Failing attach\n", ahc_name(ahc));
+			return (ENOMEM);
+		}
+	}
+
+	ahc_outb(ahc, SEQ_FLAGS, 0);
+	ahc_outb(ahc, SEQ_FLAGS2, 0);
+
+	if (ahc->scb_data->maxhscbs < AHC_SCB_MAX_ALLOC) {
+		ahc->flags |= AHC_PAGESCBS;
+	} else {
+		ahc->flags &= ~AHC_PAGESCBS;
+	}
+
+#ifdef AHC_DEBUG
+	if (ahc_debug & AHC_SHOW_MISC) {
+		printf("%s: hardware scb %lu bytes; kernel scb %lu bytes; "
+		       "ahc_dma %lu bytes\n",
+			ahc_name(ahc),
+			(u_long)sizeof(struct hardware_scb),
+			(u_long)sizeof(struct scb),
+			(u_long)sizeof(struct ahc_dma_seg));
+	}
+#endif /* AHC_DEBUG */
+
+	/* Set the SCSI Id, SXFRCTL0, SXFRCTL1, and SIMODE1, for both channels*/
+	if (ahc->features & AHC_TWIN) {
+
+		/*
+		 * The device is gated to channel B after a chip reset,
+		 * so set those values first
+		 */
+		ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) | SELBUSB);
+		term = (ahc->flags & AHC_TERM_ENB_B) != 0 ? STPWEN : 0;
+		ahc_outb(ahc, SCSIID, ahc->our_id_b);
+		scsi_conf = ahc_inb(ahc, SCSICONF + 1);
+		ahc_outb(ahc, SXFRCTL1, (scsi_conf & (ENSPCHK|STIMESEL))
+					|term|ahc->seltime_b|ENSTIMER|ACTNEGEN);
+		if ((ahc->features & AHC_ULTRA2) != 0)
+			ahc_outb(ahc, SIMODE0, ahc_inb(ahc, SIMODE0)|ENIOERR);
+		ahc_outb(ahc, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR);
+		ahc_outb(ahc, SXFRCTL0, DFON|SPIOEN);
+
+		if ((scsi_conf & RESET_SCSI) != 0
+		 && (ahc->flags & AHC_INITIATORROLE) != 0)
+			ahc->flags |= AHC_RESET_BUS_B;
+
+		/* Select Channel A */
+		ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~SELBUSB);
+	}
+
+	term = (ahc->flags & AHC_TERM_ENB_A) != 0 ? STPWEN : 0;
+	if ((ahc->features & AHC_ULTRA2) != 0)
+		ahc_outb(ahc, SCSIID_ULTRA2, ahc->our_id);
+	else
+		ahc_outb(ahc, SCSIID, ahc->our_id);
+	scsi_conf = ahc_inb(ahc, SCSICONF);
+	ahc_outb(ahc, SXFRCTL1, (scsi_conf & (ENSPCHK|STIMESEL))
+				|term|ahc->seltime
+				|ENSTIMER|ACTNEGEN);
+	if ((ahc->features & AHC_ULTRA2) != 0)
+		ahc_outb(ahc, SIMODE0, ahc_inb(ahc, SIMODE0)|ENIOERR);
+	ahc_outb(ahc, SIMODE1, ENSELTIMO|ENSCSIRST|ENSCSIPERR);
+	ahc_outb(ahc, SXFRCTL0, DFON|SPIOEN);
+
+	if ((scsi_conf & RESET_SCSI) != 0
+	 && (ahc->flags & AHC_INITIATORROLE) != 0)
+		ahc->flags |= AHC_RESET_BUS_A;
+
+	/*
+	 * Look at the information that board initialization or
+	 * the board bios has left us.
+	 */
+	ultraenb = 0;	
+	tagenable = ALL_TARGETS_MASK;
+
+	/* Grab the disconnection disable table and invert it for our needs */
+	if ((ahc->flags & AHC_USEDEFAULTS) != 0) {
+		printf("%s: Host Adapter Bios disabled.  Using default SCSI "
+			"device parameters\n", ahc_name(ahc));
+		ahc->flags |= AHC_EXTENDED_TRANS_A|AHC_EXTENDED_TRANS_B|
+			      AHC_TERM_ENB_A|AHC_TERM_ENB_B;
+		discenable = ALL_TARGETS_MASK;
+		if ((ahc->features & AHC_ULTRA) != 0)
+			ultraenb = ALL_TARGETS_MASK;
+	} else {
+		discenable = ~((ahc_inb(ahc, DISC_DSB + 1) << 8)
+			   | ahc_inb(ahc, DISC_DSB));
+		if ((ahc->features & (AHC_ULTRA|AHC_ULTRA2)) != 0)
+			ultraenb = (ahc_inb(ahc, ULTRA_ENB + 1) << 8)
+				      | ahc_inb(ahc, ULTRA_ENB);
+	}
+
+	if ((ahc->features & (AHC_WIDE|AHC_TWIN)) == 0)
+		max_targ = 7;
+
+	for (i = 0; i <= max_targ; i++) {
+		struct ahc_initiator_tinfo *tinfo;
+		struct ahc_tmode_tstate *tstate;
+		u_int our_id;
+		u_int target_id;
+		char channel;
+
+		channel = 'A';
+		our_id = ahc->our_id;
+		target_id = i;
+		if (i > 7 && (ahc->features & AHC_TWIN) != 0) {
+			channel = 'B';
+			our_id = ahc->our_id_b;
+			target_id = i % 8;
+		}
+		tinfo = ahc_fetch_transinfo(ahc, channel, our_id,
+					    target_id, &tstate);
+		/* Default to async narrow across the board */
+		memset(tinfo, 0, sizeof(*tinfo));
+		if (ahc->flags & AHC_USEDEFAULTS) {
+			if ((ahc->features & AHC_WIDE) != 0)
+				tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT;
+
+			/*
+			 * These will be truncated when we determine the
+			 * connection type we have with the target.
+			 */
+			tinfo->user.period = ahc_syncrates->period;
+			tinfo->user.offset = ~0;
+		} else {
+			u_int scsirate;
+			uint16_t mask;
+
+			/* Take the settings leftover in scratch RAM. */
+			scsirate = ahc_inb(ahc, TARG_SCSIRATE + i);
+			mask = (0x01 << i);
+			if ((ahc->features & AHC_ULTRA2) != 0) {
+				u_int offset;
+				u_int maxsync;
+
+				if ((scsirate & SOFS) == 0x0F) {
+					/*
+					 * Haven't negotiated yet,
+					 * so the format is different.
+					 */
+					scsirate = (scsirate & SXFR) >> 4
+						 | (ultraenb & mask)
+						  ? 0x08 : 0x0
+						 | (scsirate & WIDEXFER);
+					offset = MAX_OFFSET_ULTRA2;
+				} else
+					offset = ahc_inb(ahc, TARG_OFFSET + i);
+				if ((scsirate & ~WIDEXFER) == 0 && offset != 0)
+					/* Set to the lowest sync rate, 5MHz */
+					scsirate |= 0x1c;
+				maxsync = AHC_SYNCRATE_ULTRA2;
+				if ((ahc->features & AHC_DT) != 0)
+					maxsync = AHC_SYNCRATE_DT;
+				tinfo->user.period =
+				    ahc_find_period(ahc, scsirate, maxsync);
+				if (offset == 0)
+					tinfo->user.period = 0;
+				else
+					tinfo->user.offset = ~0;
+				if ((scsirate & SXFR_ULTRA2) <= 8/*10MHz*/
+				 && (ahc->features & AHC_DT) != 0)
+					tinfo->user.ppr_options =
+					    MSG_EXT_PPR_DT_REQ;
+			} else if ((scsirate & SOFS) != 0) {
+				if ((scsirate & SXFR) == 0x40
+				 && (ultraenb & mask) != 0) {
+					/* Treat 10MHz as a non-ultra speed */
+					scsirate &= ~SXFR;
+				 	ultraenb &= ~mask;
+				}
+				tinfo->user.period = 
+				    ahc_find_period(ahc, scsirate,
+						    (ultraenb & mask)
+						   ? AHC_SYNCRATE_ULTRA
+						   : AHC_SYNCRATE_FAST);
+				if (tinfo->user.period != 0)
+					tinfo->user.offset = ~0;
+			}
+			if (tinfo->user.period == 0)
+				tinfo->user.offset = 0;
+			if ((scsirate & WIDEXFER) != 0
+			 && (ahc->features & AHC_WIDE) != 0)
+				tinfo->user.width = MSG_EXT_WDTR_BUS_16_BIT;
+			tinfo->user.protocol_version = 4;
+			if ((ahc->features & AHC_DT) != 0)
+				tinfo->user.transport_version = 3;
+			else
+				tinfo->user.transport_version = 2;
+			tinfo->goal.protocol_version = 2;
+			tinfo->goal.transport_version = 2;
+			tinfo->curr.protocol_version = 2;
+			tinfo->curr.transport_version = 2;
+		}
+		tstate->ultraenb = 0;
+		tstate->discenable = discenable;
+	}
+	ahc->user_discenable = discenable;
+	ahc->user_tagenable = tagenable;
+
+	/* There are no untagged SCBs active yet. */
+	for (i = 0; i < 16; i++) {
+		ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, 0));
+		if ((ahc->flags & AHC_SCB_BTT) != 0) {
+			int lun;
+
+			/*
+			 * The SCB based BTT allows an entry per
+			 * target and lun pair.
+			 */
+			for (lun = 1; lun < AHC_NUM_LUNS; lun++)
+				ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, lun));
+		}
+	}
+
+	/* All of our queues are empty */
+	for (i = 0; i < 256; i++)
+		ahc->qoutfifo[i] = SCB_LIST_NULL;
+
+	ahc_sync_qoutfifo(ahc, BUS_DMASYNC_PREREAD);
+
+	for (i = 0; i < 256; i++)
+		ahc->qinfifo[i] = SCB_LIST_NULL;
+
+	ahc_sync_qinfifo(ahc, BUS_DMASYNC_PREWRITE);
+
+	if ((ahc->features & AHC_MULTI_TID) != 0) {
+		ahc_outb(ahc, TARGID, 0);
+		ahc_outb(ahc, TARGID + 1, 0);
+	}
+
+	/*
+	 * Tell the sequencer where it can find our arrays in memory.
+	 */
+	physaddr = ahc->scb_data->hscb_busaddr;
+	ahc_outb(ahc, HSCB_ADDR, physaddr & 0xFF);
+	ahc_outb(ahc, HSCB_ADDR + 1, (physaddr >> 8) & 0xFF);
+	ahc_outb(ahc, HSCB_ADDR + 2, (physaddr >> 16) & 0xFF);
+	ahc_outb(ahc, HSCB_ADDR + 3, (physaddr >> 24) & 0xFF);
+
+	physaddr = ahc->shared_data_busaddr;
+	ahc_outb(ahc, SHARED_DATA_ADDR, physaddr & 0xFF);
+	ahc_outb(ahc, SHARED_DATA_ADDR + 1, (physaddr >> 8) & 0xFF);
+	ahc_outb(ahc, SHARED_DATA_ADDR + 2, (physaddr >> 16) & 0xFF);
+	ahc_outb(ahc, SHARED_DATA_ADDR + 3, (physaddr >> 24) & 0xFF);
+
+	/*
+	 * Initialize the group code to command length table.
+	 * This overrides the values in TARG_SCSIRATE, so only
+	 * setup the table after we have processed that information.
+	 */
+	ahc_outb(ahc, CMDSIZE_TABLE, 5);
+	ahc_outb(ahc, CMDSIZE_TABLE + 1, 9);
+	ahc_outb(ahc, CMDSIZE_TABLE + 2, 9);
+	ahc_outb(ahc, CMDSIZE_TABLE + 3, 0);
+	ahc_outb(ahc, CMDSIZE_TABLE + 4, 15);
+	ahc_outb(ahc, CMDSIZE_TABLE + 5, 11);
+	ahc_outb(ahc, CMDSIZE_TABLE + 6, 0);
+	ahc_outb(ahc, CMDSIZE_TABLE + 7, 0);
+		
+	/* Tell the sequencer of our initial queue positions */
+	ahc_outb(ahc, KERNEL_QINPOS, 0);
+	ahc_outb(ahc, QINPOS, 0);
+	ahc_outb(ahc, QOUTPOS, 0);
+
+	/*
+	 * Use the built in queue management registers
+	 * if they are available.
+	 */
+	if ((ahc->features & AHC_QUEUE_REGS) != 0) {
+		ahc_outb(ahc, QOFF_CTLSTA, SCB_QSIZE_256);
+		ahc_outb(ahc, SDSCB_QOFF, 0);
+		ahc_outb(ahc, SNSCB_QOFF, 0);
+		ahc_outb(ahc, HNSCB_QOFF, 0);
+	}
+
+
+	/* We don't have any waiting selections */
+	ahc_outb(ahc, WAITING_SCBH, SCB_LIST_NULL);
+
+	/* Our disconnection list is empty too */
+	ahc_outb(ahc, DISCONNECTED_SCBH, SCB_LIST_NULL);
+
+	/* Message out buffer starts empty */
+	ahc_outb(ahc, MSG_OUT, MSG_NOOP);
+
+	/*
+	 * Setup the allowed SCSI Sequences based on operational mode.
+	 * If we are a target, we'll enalbe select in operations once
+	 * we've had a lun enabled.
+	 */
+	scsiseq_template = ENSELO|ENAUTOATNO|ENAUTOATNP;
+	if ((ahc->flags & AHC_INITIATORROLE) != 0)
+		scsiseq_template |= ENRSELI;
+	ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq_template);
+
+	/*
+	 * Load the Sequencer program and Enable the adapter
+	 * in "fast" mode.
+	 */
+	if (bootverbose)
+		printf("%s: Downloading Sequencer Program...",
+		       ahc_name(ahc));
+
+	ahc_loadseq(ahc);
+
+	if ((ahc->features & AHC_ULTRA2) != 0) {
+		int wait;
+
+		/*
+		 * Wait for up to 500ms for our transceivers
+		 * to settle.  If the adapter does not have
+		 * a cable attached, the transceivers may
+		 * never settle, so don't complain if we
+		 * fail here.
+		 */
+		ahc_pause(ahc);
+		for (wait = 5000;
+		     (ahc_inb(ahc, SBLKCTL) & (ENAB40|ENAB20)) == 0 && wait;
+		     wait--)
+			ahc_delay(100);
+		ahc_unpause(ahc);
+	}
+	return (0);
+}
+
+void
+ahc_intr_enable(struct ahc_softc *ahc, int enable)
+{
+	u_int hcntrl;
+
+	hcntrl = ahc_inb(ahc, HCNTRL);
+	hcntrl &= ~INTEN;
+	ahc->pause &= ~INTEN;
+	ahc->unpause &= ~INTEN;
+	if (enable) {
+		hcntrl |= INTEN;
+		ahc->pause |= INTEN;
+		ahc->unpause |= INTEN;
+	}
+	ahc_outb(ahc, HCNTRL, hcntrl);
+}
+
+/*
+ * Ensure that the card is paused in a location
+ * outside of all critical sections and that all
+ * pending work is completed prior to returning.
+ * This routine should only be called from outside
+ * an interrupt context.
+ */
+void
+ahc_pause_and_flushwork(struct ahc_softc *ahc)
+{
+	int intstat;
+	int maxloops;
+	int paused;
+
+	maxloops = 1000;
+	ahc->flags |= AHC_ALL_INTERRUPTS;
+	intstat = 0;
+	paused = FALSE;
+	do {
+		if (paused) {
+			ahc_unpause(ahc);
+			/*
+			 * Give the sequencer some time to service
+			 * any active selections.
+			 */
+			ahc_delay(200);
+		}
+		ahc_intr(ahc);
+		ahc_pause(ahc);
+		paused = TRUE;
+		ahc_outb(ahc, SCSISEQ, ahc_inb(ahc, SCSISEQ) & ~ENSELO);
+		ahc_clear_critical_section(ahc);
+		if (intstat == 0xFF && (ahc->features & AHC_REMOVABLE) != 0)
+			break;
+	} while (--maxloops
+	      && (((intstat = ahc_inb(ahc, INTSTAT)) & INT_PEND) != 0
+	       || (ahc_inb(ahc, SSTAT0) & (SELDO|SELINGO))));
+	if (maxloops == 0) {
+		printf("Infinite interrupt loop, INTSTAT = %x",
+		       ahc_inb(ahc, INTSTAT));
+	}
+	ahc_platform_flushwork(ahc);
+	ahc->flags &= ~AHC_ALL_INTERRUPTS;
+}
+
+int
+ahc_suspend(struct ahc_softc *ahc)
+{
+	uint8_t *ptr;
+	int	 i;
+
+	ahc_pause_and_flushwork(ahc);
+
+	if (LIST_FIRST(&ahc->pending_scbs) != NULL)
+		return (EBUSY);
+
+#if AHC_TARGET_MODE
+	/*
+	 * XXX What about ATIOs that have not yet been serviced?
+	 * Perhaps we should just refuse to be suspended if we
+	 * are acting in a target role.
+	 */
+	if (ahc->pending_device != NULL)
+		return (EBUSY);
+#endif
+
+	/* Save volatile registers */
+	if ((ahc->features & AHC_TWIN) != 0) {
+		ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) | SELBUSB);
+		ahc->suspend_state.channel[1].scsiseq = ahc_inb(ahc, SCSISEQ);
+		ahc->suspend_state.channel[1].sxfrctl0 = ahc_inb(ahc, SXFRCTL0);
+		ahc->suspend_state.channel[1].sxfrctl1 = ahc_inb(ahc, SXFRCTL1);
+		ahc->suspend_state.channel[1].simode0 = ahc_inb(ahc, SIMODE0);
+		ahc->suspend_state.channel[1].simode1 = ahc_inb(ahc, SIMODE1);
+		ahc->suspend_state.channel[1].seltimer = ahc_inb(ahc, SELTIMER);
+		ahc->suspend_state.channel[1].seqctl = ahc_inb(ahc, SEQCTL);
+		ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~SELBUSB);
+	}
+	ahc->suspend_state.channel[0].scsiseq = ahc_inb(ahc, SCSISEQ);
+	ahc->suspend_state.channel[0].sxfrctl0 = ahc_inb(ahc, SXFRCTL0);
+	ahc->suspend_state.channel[0].sxfrctl1 = ahc_inb(ahc, SXFRCTL1);
+	ahc->suspend_state.channel[0].simode0 = ahc_inb(ahc, SIMODE0);
+	ahc->suspend_state.channel[0].simode1 = ahc_inb(ahc, SIMODE1);
+	ahc->suspend_state.channel[0].seltimer = ahc_inb(ahc, SELTIMER);
+	ahc->suspend_state.channel[0].seqctl = ahc_inb(ahc, SEQCTL);
+
+	if ((ahc->chip & AHC_PCI) != 0) {
+		ahc->suspend_state.dscommand0 = ahc_inb(ahc, DSCOMMAND0);
+		ahc->suspend_state.dspcistatus = ahc_inb(ahc, DSPCISTATUS);
+	}
+
+	if ((ahc->features & AHC_DT) != 0) {
+		u_int sfunct;
+
+		sfunct = ahc_inb(ahc, SFUNCT) & ~ALT_MODE;
+		ahc_outb(ahc, SFUNCT, sfunct | ALT_MODE);
+		ahc->suspend_state.optionmode = ahc_inb(ahc, OPTIONMODE);
+		ahc_outb(ahc, SFUNCT, sfunct);
+		ahc->suspend_state.crccontrol1 = ahc_inb(ahc, CRCCONTROL1);
+	}
+
+	if ((ahc->features & AHC_MULTI_FUNC) != 0)
+		ahc->suspend_state.scbbaddr = ahc_inb(ahc, SCBBADDR);
+
+	if ((ahc->features & AHC_ULTRA2) != 0)
+		ahc->suspend_state.dff_thrsh = ahc_inb(ahc, DFF_THRSH);
+
+	ptr = ahc->suspend_state.scratch_ram;
+	for (i = 0; i < 64; i++)
+		*ptr++ = ahc_inb(ahc, SRAM_BASE + i);
+
+	if ((ahc->features & AHC_MORE_SRAM) != 0) {
+		for (i = 0; i < 16; i++)
+			*ptr++ = ahc_inb(ahc, TARG_OFFSET + i);
+	}
+
+	ptr = ahc->suspend_state.btt;
+	if ((ahc->flags & AHC_SCB_BTT) != 0) {
+		for (i = 0;i < AHC_NUM_TARGETS; i++) {
+			int j;
+
+			for (j = 0;j < AHC_NUM_LUNS; j++) {
+				u_int tcl;
+
+				tcl = BUILD_TCL(i << 4, j);
+				*ptr = ahc_index_busy_tcl(ahc, tcl);
+			}
+		}
+	}
+	ahc_shutdown(ahc);
+	return (0);
+}
+
+int
+ahc_resume(struct ahc_softc *ahc)
+{
+	uint8_t *ptr;
+	int	 i;
+
+	ahc_reset(ahc);
+
+	ahc_build_free_scb_list(ahc);
+
+	/* Restore volatile registers */
+	if ((ahc->features & AHC_TWIN) != 0) {
+		ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) | SELBUSB);
+		ahc_outb(ahc, SCSIID, ahc->our_id);
+		ahc_outb(ahc, SCSISEQ, ahc->suspend_state.channel[1].scsiseq);
+		ahc_outb(ahc, SXFRCTL0, ahc->suspend_state.channel[1].sxfrctl0);
+		ahc_outb(ahc, SXFRCTL1, ahc->suspend_state.channel[1].sxfrctl1);
+		ahc_outb(ahc, SIMODE0, ahc->suspend_state.channel[1].simode0);
+		ahc_outb(ahc, SIMODE1, ahc->suspend_state.channel[1].simode1);
+		ahc_outb(ahc, SELTIMER, ahc->suspend_state.channel[1].seltimer);
+		ahc_outb(ahc, SEQCTL, ahc->suspend_state.channel[1].seqctl);
+		ahc_outb(ahc, SBLKCTL, ahc_inb(ahc, SBLKCTL) & ~SELBUSB);
+	}
+	ahc_outb(ahc, SCSISEQ, ahc->suspend_state.channel[0].scsiseq);
+	ahc_outb(ahc, SXFRCTL0, ahc->suspend_state.channel[0].sxfrctl0);
+	ahc_outb(ahc, SXFRCTL1, ahc->suspend_state.channel[0].sxfrctl1);
+	ahc_outb(ahc, SIMODE0, ahc->suspend_state.channel[0].simode0);
+	ahc_outb(ahc, SIMODE1, ahc->suspend_state.channel[0].simode1);
+	ahc_outb(ahc, SELTIMER, ahc->suspend_state.channel[0].seltimer);
+	ahc_outb(ahc, SEQCTL, ahc->suspend_state.channel[0].seqctl);
+	if ((ahc->features & AHC_ULTRA2) != 0)
+		ahc_outb(ahc, SCSIID_ULTRA2, ahc->our_id);
+	else
+		ahc_outb(ahc, SCSIID, ahc->our_id);
+
+	if ((ahc->chip & AHC_PCI) != 0) {
+		ahc_outb(ahc, DSCOMMAND0, ahc->suspend_state.dscommand0);
+		ahc_outb(ahc, DSPCISTATUS, ahc->suspend_state.dspcistatus);
+	}
+
+	if ((ahc->features & AHC_DT) != 0) {
+		u_int sfunct;
+
+		sfunct = ahc_inb(ahc, SFUNCT) & ~ALT_MODE;
+		ahc_outb(ahc, SFUNCT, sfunct | ALT_MODE);
+		ahc_outb(ahc, OPTIONMODE, ahc->suspend_state.optionmode);
+		ahc_outb(ahc, SFUNCT, sfunct);
+		ahc_outb(ahc, CRCCONTROL1, ahc->suspend_state.crccontrol1);
+	}
+
+	if ((ahc->features & AHC_MULTI_FUNC) != 0)
+		ahc_outb(ahc, SCBBADDR, ahc->suspend_state.scbbaddr);
+
+	if ((ahc->features & AHC_ULTRA2) != 0)
+		ahc_outb(ahc, DFF_THRSH, ahc->suspend_state.dff_thrsh);
+
+	ptr = ahc->suspend_state.scratch_ram;
+	for (i = 0; i < 64; i++)
+		ahc_outb(ahc, SRAM_BASE + i, *ptr++);
+
+	if ((ahc->features & AHC_MORE_SRAM) != 0) {
+		for (i = 0; i < 16; i++)
+			ahc_outb(ahc, TARG_OFFSET + i, *ptr++);
+	}
+
+	ptr = ahc->suspend_state.btt;
+	if ((ahc->flags & AHC_SCB_BTT) != 0) {
+		for (i = 0;i < AHC_NUM_TARGETS; i++) {
+			int j;
+
+			for (j = 0;j < AHC_NUM_LUNS; j++) {
+				u_int tcl;
+
+				tcl = BUILD_TCL(i << 4, j);
+				ahc_busy_tcl(ahc, tcl, *ptr);
+			}
+		}
+	}
+	return (0);
+}
+
+/************************** Busy Target Table *********************************/
+/*
+ * Return the untagged transaction id for a given target/channel lun.
+ * Optionally, clear the entry.
+ */
+u_int
+ahc_index_busy_tcl(struct ahc_softc *ahc, u_int tcl)
+{
+	u_int scbid;
+	u_int target_offset;
+
+	if ((ahc->flags & AHC_SCB_BTT) != 0) {
+		u_int saved_scbptr;
+		
+		saved_scbptr = ahc_inb(ahc, SCBPTR);
+		ahc_outb(ahc, SCBPTR, TCL_LUN(tcl));
+		scbid = ahc_inb(ahc, SCB_64_BTT + TCL_TARGET_OFFSET(tcl));
+		ahc_outb(ahc, SCBPTR, saved_scbptr);
+	} else {
+		target_offset = TCL_TARGET_OFFSET(tcl);
+		scbid = ahc_inb(ahc, BUSY_TARGETS + target_offset);
+	}
+
+	return (scbid);
+}
+
+void
+ahc_unbusy_tcl(struct ahc_softc *ahc, u_int tcl)
+{
+	u_int target_offset;
+
+	if ((ahc->flags & AHC_SCB_BTT) != 0) {
+		u_int saved_scbptr;
+		
+		saved_scbptr = ahc_inb(ahc, SCBPTR);
+		ahc_outb(ahc, SCBPTR, TCL_LUN(tcl));
+		ahc_outb(ahc, SCB_64_BTT+TCL_TARGET_OFFSET(tcl), SCB_LIST_NULL);
+		ahc_outb(ahc, SCBPTR, saved_scbptr);
+	} else {
+		target_offset = TCL_TARGET_OFFSET(tcl);
+		ahc_outb(ahc, BUSY_TARGETS + target_offset, SCB_LIST_NULL);
+	}
+}
+
+void
+ahc_busy_tcl(struct ahc_softc *ahc, u_int tcl, u_int scbid)
+{
+	u_int target_offset;
+
+	if ((ahc->flags & AHC_SCB_BTT) != 0) {
+		u_int saved_scbptr;
+		
+		saved_scbptr = ahc_inb(ahc, SCBPTR);
+		ahc_outb(ahc, SCBPTR, TCL_LUN(tcl));
+		ahc_outb(ahc, SCB_64_BTT + TCL_TARGET_OFFSET(tcl), scbid);
+		ahc_outb(ahc, SCBPTR, saved_scbptr);
+	} else {
+		target_offset = TCL_TARGET_OFFSET(tcl);
+		ahc_outb(ahc, BUSY_TARGETS + target_offset, scbid);
+	}
+}
+
+/************************** SCB and SCB queue management **********************/
+int
+ahc_match_scb(struct ahc_softc *ahc, struct scb *scb, int target,
+	      char channel, int lun, u_int tag, role_t role)
+{
+	char chan;
+	int targ, slun, match;
+
+	if (scb == NULL)
+		return 0;
+
+	targ = SCB_GET_TARGET(ahc, scb);
+	chan = SCB_GET_CHANNEL(ahc, scb);
+	slun = SCB_GET_LUN(scb);
+
+	match = ((chan == channel) || (channel == ALL_CHANNELS));
+	if (match != 0)
+		match = ((targ == target) || (target == CAM_TARGET_WILDCARD));
+	if (match != 0)
+		match = ((lun == slun) || (lun == CAM_LUN_WILDCARD));
+	if (match != 0) {
+#if AHC_TARGET_MODE
+		int group;
+
+		group = XPT_FC_GROUP(scb->io_ctx->ccb_h.func_code);
+		if (role == ROLE_INITIATOR) {
+			match = (group != XPT_FC_GROUP_TMODE)
+			      && ((tag == scb->hscb->tag)
+			       || (tag == SCB_LIST_NULL));
+		} else if (role == ROLE_TARGET) {
+			match = (group == XPT_FC_GROUP_TMODE)
+			      && ((tag == scb->io_ctx->csio.tag_id)
+			       || (tag == SCB_LIST_NULL));
+		}
+#else /* !AHC_TARGET_MODE */
+		match = ((tag == scb->hscb->tag) || (tag == SCB_LIST_NULL));
+#endif /* AHC_TARGET_MODE */
+	}
+
+	return match;
+}
+
+void
+ahc_freeze_devq(struct ahc_softc *ahc, struct scb *scb)
+{
+	int	target;
+	char	channel;
+	int	lun;
+
+	target = SCB_GET_TARGET(ahc, scb);
+	lun = SCB_GET_LUN(scb);
+	channel = SCB_GET_CHANNEL(ahc, scb);
+	
+	ahc_search_qinfifo(ahc, target, channel, lun,
+			   /*tag*/SCB_LIST_NULL, ROLE_UNKNOWN,
+			   CAM_REQUEUE_REQ, SEARCH_COMPLETE);
+
+	ahc_platform_freeze_devq(ahc, scb);
+}
+
+void
+ahc_qinfifo_requeue_tail(struct ahc_softc *ahc, struct scb *scb)
+{
+	struct scb *prev_scb;
+
+	prev_scb = NULL;
+	if (ahc_qinfifo_count(ahc) != 0) {
+		u_int prev_tag;
+		uint8_t prev_pos;
+
+		prev_pos = ahc->qinfifonext - 1;
+		prev_tag = ahc->qinfifo[prev_pos];
+		prev_scb = ahc_lookup_scb(ahc, prev_tag);
+	}
+	ahc_qinfifo_requeue(ahc, prev_scb, scb);
+	if ((ahc->features & AHC_QUEUE_REGS) != 0) {
+		ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
+	} else {
+		ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
+	}
+}
+
+static void
+ahc_qinfifo_requeue(struct ahc_softc *ahc, struct scb *prev_scb,
+		    struct scb *scb)
+{
+	if (prev_scb == NULL) {
+		ahc_outb(ahc, NEXT_QUEUED_SCB, scb->hscb->tag);
+	} else {
+		prev_scb->hscb->next = scb->hscb->tag;
+		ahc_sync_scb(ahc, prev_scb, 
+			     BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
+	}
+	ahc->qinfifo[ahc->qinfifonext] = scb->hscb->tag;
+	ahc_dmamap_sync(ahc, ahc->parent_dmat, ahc->shared_data_dmamap,
+			/*offset*/ahc->qinfifonext+256, /*len*/1,
+			BUS_DMASYNC_PREWRITE);
+	ahc->qinfifonext++;
+	scb->hscb->next = ahc->next_queued_scb->hscb->tag;
+	ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
+}
+
+static int
+ahc_qinfifo_count(struct ahc_softc *ahc)
+{
+	uint8_t qinpos;
+	uint8_t diff;
+
+	if ((ahc->features & AHC_QUEUE_REGS) != 0) {
+		qinpos = ahc_inb(ahc, SNSCB_QOFF);
+		ahc_outb(ahc, SNSCB_QOFF, qinpos);
+	} else
+		qinpos = ahc_inb(ahc, QINPOS);
+	diff = ahc->qinfifonext - qinpos;
+	return (diff);
+}
+
+int
+ahc_search_qinfifo(struct ahc_softc *ahc, int target, char channel,
+		   int lun, u_int tag, role_t role, uint32_t status,
+		   ahc_search_action action)
+{
+	struct	scb *scb;
+	struct	scb *prev_scb;
+	uint8_t qinstart;
+	uint8_t qinpos;
+	uint8_t qintail;
+	uint8_t next;
+	uint8_t prev;
+	uint8_t curscbptr;
+	int	found;
+	int	have_qregs;
+
+	qintail = ahc->qinfifonext;
+	have_qregs = (ahc->features & AHC_QUEUE_REGS) != 0;
+	if (have_qregs) {
+		qinstart = ahc_inb(ahc, SNSCB_QOFF);
+		ahc_outb(ahc, SNSCB_QOFF, qinstart);
+	} else
+		qinstart = ahc_inb(ahc, QINPOS);
+	qinpos = qinstart;
+	found = 0;
+	prev_scb = NULL;
+
+	if (action == SEARCH_COMPLETE) {
+		/*
+		 * Don't attempt to run any queued untagged transactions
+		 * until we are done with the abort process.
+		 */
+		ahc_freeze_untagged_queues(ahc);
+	}
+
+	/*
+	 * Start with an empty queue.  Entries that are not chosen
+	 * for removal will be re-added to the queue as we go.
+	 */
+	ahc->qinfifonext = qinpos;
+	ahc_outb(ahc, NEXT_QUEUED_SCB, ahc->next_queued_scb->hscb->tag);
+
+	while (qinpos != qintail) {
+		scb = ahc_lookup_scb(ahc, ahc->qinfifo[qinpos]);
+		if (scb == NULL) {
+			printf("qinpos = %d, SCB index = %d\n",
+				qinpos, ahc->qinfifo[qinpos]);
+			panic("Loop 1");
+		}
+
+		if (ahc_match_scb(ahc, scb, target, channel, lun, tag, role)) {
+			/*
+			 * We found an scb that needs to be acted on.
+			 */
+			found++;
+			switch (action) {
+			case SEARCH_COMPLETE:
+			{
+				cam_status ostat;
+				cam_status cstat;
+
+				ostat = ahc_get_transaction_status(scb);
+				if (ostat == CAM_REQ_INPROG)
+					ahc_set_transaction_status(scb, status);
+				cstat = ahc_get_transaction_status(scb);
+				if (cstat != CAM_REQ_CMP)
+					ahc_freeze_scb(scb);
+				if ((scb->flags & SCB_ACTIVE) == 0)
+					printf("Inactive SCB in qinfifo\n");
+				ahc_done(ahc, scb);
+
+				/* FALLTHROUGH */
+			}
+			case SEARCH_REMOVE:
+				break;
+			case SEARCH_COUNT:
+				ahc_qinfifo_requeue(ahc, prev_scb, scb);
+				prev_scb = scb;
+				break;
+			}
+		} else {
+			ahc_qinfifo_requeue(ahc, prev_scb, scb);
+			prev_scb = scb;
+		}
+		qinpos++;
+	}
+
+	if ((ahc->features & AHC_QUEUE_REGS) != 0) {
+		ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
+	} else {
+		ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
+	}
+
+	if (action != SEARCH_COUNT
+	 && (found != 0)
+	 && (qinstart != ahc->qinfifonext)) {
+		/*
+		 * The sequencer may be in the process of DMA'ing
+		 * down the SCB at the beginning of the queue.
+		 * This could be problematic if either the first,
+		 * or the second SCB is removed from the queue
+		 * (the first SCB includes a pointer to the "next"
+		 * SCB to DMA). If we have removed any entries, swap
+		 * the first element in the queue with the next HSCB
+		 * so the sequencer will notice that NEXT_QUEUED_SCB
+		 * has changed during its DMA attempt and will retry
+		 * the DMA.
+		 */
+		scb = ahc_lookup_scb(ahc, ahc->qinfifo[qinstart]);
+
+		if (scb == NULL) {
+			printf("found = %d, qinstart = %d, qinfifionext = %d\n",
+				found, qinstart, ahc->qinfifonext);
+			panic("First/Second Qinfifo fixup");
+		}
+		/*
+		 * ahc_swap_with_next_hscb forces our next pointer to
+		 * point to the reserved SCB for future commands.  Save
+		 * and restore our original next pointer to maintain
+		 * queue integrity.
+		 */
+		next = scb->hscb->next;
+		ahc->scb_data->scbindex[scb->hscb->tag] = NULL;
+		ahc_swap_with_next_hscb(ahc, scb);
+		scb->hscb->next = next;
+		ahc->qinfifo[qinstart] = scb->hscb->tag;
+
+		/* Tell the card about the new head of the qinfifo. */
+		ahc_outb(ahc, NEXT_QUEUED_SCB, scb->hscb->tag);
+
+		/* Fixup the tail "next" pointer. */
+		qintail = ahc->qinfifonext - 1;
+		scb = ahc_lookup_scb(ahc, ahc->qinfifo[qintail]);
+		scb->hscb->next = ahc->next_queued_scb->hscb->tag;
+	}
+
+	/*
+	 * Search waiting for selection list.
+	 */
+	curscbptr = ahc_inb(ahc, SCBPTR);
+	next = ahc_inb(ahc, WAITING_SCBH);  /* Start at head of list. */
+	prev = SCB_LIST_NULL;
+
+	while (next != SCB_LIST_NULL) {
+		uint8_t scb_index;
+
+		ahc_outb(ahc, SCBPTR, next);
+		scb_index = ahc_inb(ahc, SCB_TAG);
+		if (scb_index >= ahc->scb_data->numscbs) {
+			printf("Waiting List inconsistency. "
+			       "SCB index == %d, yet numscbs == %d.",
+			       scb_index, ahc->scb_data->numscbs);
+			ahc_dump_card_state(ahc);
+			panic("for safety");
+		}
+		scb = ahc_lookup_scb(ahc, scb_index);
+		if (scb == NULL) {
+			printf("scb_index = %d, next = %d\n",
+				scb_index, next);
+			panic("Waiting List traversal");
+		}
+		if (ahc_match_scb(ahc, scb, target, channel,
+				  lun, SCB_LIST_NULL, role)) {
+			/*
+			 * We found an scb that needs to be acted on.
+			 */
+			found++;
+			switch (action) {
+			case SEARCH_COMPLETE:
+			{
+				cam_status ostat;
+				cam_status cstat;
+
+				ostat = ahc_get_transaction_status(scb);
+				if (ostat == CAM_REQ_INPROG)
+					ahc_set_transaction_status(scb, status);
+				cstat = ahc_get_transaction_status(scb);
+				if (cstat != CAM_REQ_CMP)
+					ahc_freeze_scb(scb);
+				if ((scb->flags & SCB_ACTIVE) == 0)
+					printf("Inactive SCB in Wait List\n");
+				ahc_done(ahc, scb);
+				/* FALLTHROUGH */
+			}
+			case SEARCH_REMOVE:
+				next = ahc_rem_wscb(ahc, next, prev);
+				break;
+			case SEARCH_COUNT:
+				prev = next;
+				next = ahc_inb(ahc, SCB_NEXT);
+				break;
+			}
+		} else {
+			
+			prev = next;
+			next = ahc_inb(ahc, SCB_NEXT);
+		}
+	}
+	ahc_outb(ahc, SCBPTR, curscbptr);
+
+	found += ahc_search_untagged_queues(ahc, /*ahc_io_ctx_t*/NULL, target,
+					    channel, lun, status, action);
+
+	if (action == SEARCH_COMPLETE)
+		ahc_release_untagged_queues(ahc);
+	return (found);
+}
+
+int
+ahc_search_untagged_queues(struct ahc_softc *ahc, struct scsi_xfer *xs,
+			   int target, char channel, int lun, uint32_t status,
+			   ahc_search_action action)
+{
+	struct	scb *scb;
+	int	maxtarget;
+	int	found;
+	int	i;
+
+	if (action == SEARCH_COMPLETE) {
+		/*
+		 * Don't attempt to run any queued untagged transactions
+		 * until we are done with the abort process.
+		 */
+		ahc_freeze_untagged_queues(ahc);
+	}
+
+	found = 0;
+	i = 0;
+	if ((ahc->flags & AHC_SCB_BTT) == 0) {
+
+		maxtarget = 16;
+		if (target != CAM_TARGET_WILDCARD) {
+
+			i = target;
+			if (channel == 'B')
+				i += 8;
+			maxtarget = i + 1;
+		}
+	} else {
+		maxtarget = 0;
+	}
+
+	for (; i < maxtarget; i++) {
+		struct scb_tailq *untagged_q;
+		struct scb *next_scb;
+
+		untagged_q = &(ahc->untagged_queues[i]);
+		next_scb = TAILQ_FIRST(untagged_q);
+		while (next_scb != NULL) {
+
+			scb = next_scb;
+			next_scb = TAILQ_NEXT(scb, links.tqe);
+
+			/*
+			 * The head of the list may be the currently
+			 * active untagged command for a device.
+			 * We're only searching for commands that
+			 * have not been started.  A transaction
+			 * marked active but still in the qinfifo
+			 * is removed by the qinfifo scanning code
+			 * above.
+			 */
+			if ((scb->flags & SCB_ACTIVE) != 0)
+				continue;
+
+			if (ahc_match_scb(ahc, scb, target, channel, lun,
+					  SCB_LIST_NULL, ROLE_INITIATOR) == 0
+			    /*|| (ctx != NULL && ctx != scb->io_ctx)*/)
+				continue;
+
+			/*
+			 * We found an scb that needs to be acted on.
+			 */
+			found++;
+			switch (action) {
+			case SEARCH_COMPLETE:
+			{
+				cam_status ostat;
+				cam_status cstat;
+
+				ostat = ahc_get_transaction_status(scb);
+				if (ostat == CAM_REQ_INPROG)
+					ahc_set_transaction_status(scb, status);
+				cstat = ahc_get_transaction_status(scb);
+				if (cstat != CAM_REQ_CMP)
+					ahc_freeze_scb(scb);
+				ahc_done(ahc, scb);
+				break;
+			}
+			case SEARCH_REMOVE:
+				scb->flags &= ~SCB_UNTAGGEDQ;
+				TAILQ_REMOVE(untagged_q, scb, links.tqe);
+				break;
+			case SEARCH_COUNT:
+				break;
+			}
+		}
+	}
+
+	if (action == SEARCH_COMPLETE)
+		ahc_release_untagged_queues(ahc);
+	return (found);
+}
+
+int
+ahc_search_disc_list(struct ahc_softc *ahc, int target, char channel,
+		     int lun, u_int tag, int stop_on_first, int remove,
+		     int save_state)
+{
+	struct	scb *scbp;
+	u_int	next;
+	u_int	prev;
+	u_int	count;
+	u_int	active_scb;
+
+	count = 0;
+	next = ahc_inb(ahc, DISCONNECTED_SCBH);
+	prev = SCB_LIST_NULL;
+
+	if (save_state) {
+		/* restore this when we're done */
+		active_scb = ahc_inb(ahc, SCBPTR);
+	} else
+		/* Silence compiler */
+		active_scb = SCB_LIST_NULL;
+
+	while (next != SCB_LIST_NULL) {
+		u_int scb_index;
+
+		ahc_outb(ahc, SCBPTR, next);
+		scb_index = ahc_inb(ahc, SCB_TAG);
+		if (scb_index >= ahc->scb_data->numscbs) {
+			printf("Disconnected List inconsistency. "
+			       "SCB index == %d, yet numscbs == %d.",
+			       scb_index, ahc->scb_data->numscbs);
+			ahc_dump_card_state(ahc);
+			panic("for safety");
+		}
+
+		if (next == prev) {
+			panic("Disconnected List Loop. "
+			      "cur SCBPTR == %x, prev SCBPTR == %x.",
+			      next, prev);
+		}
+		scbp = ahc_lookup_scb(ahc, scb_index);
+		if (ahc_match_scb(ahc, scbp, target, channel, lun,
+				  tag, ROLE_INITIATOR)) {
+			count++;
+			if (remove) {
+				next =
+				    ahc_rem_scb_from_disc_list(ahc, prev, next);
+			} else {
+				prev = next;
+				next = ahc_inb(ahc, SCB_NEXT);
+			}
+			if (stop_on_first)
+				break;
+		} else {
+			prev = next;
+			next = ahc_inb(ahc, SCB_NEXT);
+		}
+	}
+	if (save_state)
+		ahc_outb(ahc, SCBPTR, active_scb);
+	return (count);
+}
+
+/*
+ * Remove an SCB from the on chip list of disconnected transactions.
+ * This is empty/unused if we are not performing SCB paging.
+ */
+static u_int
+ahc_rem_scb_from_disc_list(struct ahc_softc *ahc, u_int prev, u_int scbptr)
+{
+	u_int next;
+
+	ahc_outb(ahc, SCBPTR, scbptr);
+	next = ahc_inb(ahc, SCB_NEXT);
+
+	ahc_outb(ahc, SCB_CONTROL, 0);
+
+	ahc_add_curscb_to_free_list(ahc);
+
+	if (prev != SCB_LIST_NULL) {
+		ahc_outb(ahc, SCBPTR, prev);
+		ahc_outb(ahc, SCB_NEXT, next);
+	} else
+		ahc_outb(ahc, DISCONNECTED_SCBH, next);
+
+	return (next);
+}
+
+/*
+ * Add the SCB as selected by SCBPTR onto the on chip list of
+ * free hardware SCBs.  This list is empty/unused if we are not
+ * performing SCB paging.
+ */
+static void
+ahc_add_curscb_to_free_list(struct ahc_softc *ahc)
+{
+	/*
+	 * Invalidate the tag so that our abort
+	 * routines don't think it's active.
+	 */
+	ahc_outb(ahc, SCB_TAG, SCB_LIST_NULL);
+
+	if ((ahc->flags & AHC_PAGESCBS) != 0) {
+		ahc_outb(ahc, SCB_NEXT, ahc_inb(ahc, FREE_SCBH));
+		ahc_outb(ahc, FREE_SCBH, ahc_inb(ahc, SCBPTR));
+	}
+}
+
+/*
+ * Manipulate the waiting for selection list and return the
+ * scb that follows the one that we remove.
+ */
+static u_int
+ahc_rem_wscb(struct ahc_softc *ahc, u_int scbpos, u_int prev)
+{       
+	u_int curscb, next;
+
+	/*
+	 * Select the SCB we want to abort and
+	 * pull the next pointer out of it.
+	 */
+	curscb = ahc_inb(ahc, SCBPTR);
+	ahc_outb(ahc, SCBPTR, scbpos);
+	next = ahc_inb(ahc, SCB_NEXT);
+
+	/* Clear the necessary fields */
+	ahc_outb(ahc, SCB_CONTROL, 0);
+
+	ahc_add_curscb_to_free_list(ahc);
+
+	/* update the waiting list */
+	if (prev == SCB_LIST_NULL) {
+		/* First in the list */
+		ahc_outb(ahc, WAITING_SCBH, next); 
+
+		/*
+		 * Ensure we aren't attempting to perform
+		 * selection for this entry.
+		 */
+		ahc_outb(ahc, SCSISEQ, (ahc_inb(ahc, SCSISEQ) & ~ENSELO));
+	} else {
+		/*
+		 * Select the scb that pointed to us 
+		 * and update its next pointer.
+		 */
+		ahc_outb(ahc, SCBPTR, prev);
+		ahc_outb(ahc, SCB_NEXT, next);
+	}
+
+	/*
+	 * Point us back at the original scb position.
+	 */
+	ahc_outb(ahc, SCBPTR, curscb);
+	return next;
+}
+
+/******************************** Error Handling ******************************/
+/*
+ * Abort all SCBs that match the given description (target/channel/lun/tag),
+ * setting their status to the passed in status if the status has not already
+ * been modified from CAM_REQ_INPROG.  This routine assumes that the sequencer
+ * is paused before it is called.
+ */
+int
+ahc_abort_scbs(struct ahc_softc *ahc, int target, char channel,
+	       int lun, u_int tag, role_t role, uint32_t status)
+{
+	struct	scb *scbp;
+	struct	scb *scbp_next;
+	u_int	active_scb;
+	int	i, j;
+	int	maxtarget;
+	int	minlun;
+	int	maxlun;
+
+	int	found;
+
+	/*
+	 * Don't attempt to run any queued untagged transactions
+	 * until we are done with the abort process.
+	 */
+	ahc_freeze_untagged_queues(ahc);
+
+	/* restore this when we're done */
+	active_scb = ahc_inb(ahc, SCBPTR);
+
+	found = ahc_search_qinfifo(ahc, target, channel, lun, SCB_LIST_NULL,
+				   role, CAM_REQUEUE_REQ, SEARCH_COMPLETE);
+
+	/*
+	 * Clean out the busy target table for any untagged commands.
+	 */
+	i = 0;
+	maxtarget = 16;
+	if (target != CAM_TARGET_WILDCARD) {
+		i = target;
+		if (channel == 'B')
+			i += 8;
+		maxtarget = i + 1;
+	}
+
+	if (lun == CAM_LUN_WILDCARD) {
+
+		/*
+		 * Unless we are using an SCB based
+		 * busy targets table, there is only
+		 * one table entry for all luns of
+		 * a target.
+		 */
+		minlun = 0;
+		maxlun = 1;
+		if ((ahc->flags & AHC_SCB_BTT) != 0)
+			maxlun = AHC_NUM_LUNS;
+	} else {
+		minlun = lun;
+		maxlun = lun + 1;
+	}
+
+	if (role != ROLE_TARGET) {
+		for (;i < maxtarget; i++) {
+			for (j = minlun;j < maxlun; j++) {
+				u_int scbid;
+				u_int tcl;
+
+				tcl = BUILD_TCL(i << 4, j);
+				scbid = ahc_index_busy_tcl(ahc, tcl);
+				scbp = ahc_lookup_scb(ahc, scbid);
+				if (scbp == NULL
+				 || ahc_match_scb(ahc, scbp, target, channel,
+						  lun, tag, role) == 0)
+					continue;
+				ahc_unbusy_tcl(ahc, BUILD_TCL(i << 4, j));
+			}
+		}
+
+		/*
+		 * Go through the disconnected list and remove any entries we
+		 * have queued for completion, 0'ing their control byte too.
+		 * We save the active SCB and restore it ourselves, so there
+		 * is no reason for this search to restore it too.
+		 */
+		ahc_search_disc_list(ahc, target, channel, lun, tag,
+				     /*stop_on_first*/FALSE, /*remove*/TRUE,
+				     /*save_state*/FALSE);
+	}
+
+	/*
+	 * Go through the hardware SCB array looking for commands that
+	 * were active but not on any list.  In some cases, these remnants
+	 * might not still have mappings in the scbindex array (e.g. unexpected
+	 * bus free with the same scb queued for an abort).  Don't hold this
+	 * against them.
+	 */
+	for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
+		u_int scbid;
+
+		ahc_outb(ahc, SCBPTR, i);
+		scbid = ahc_inb(ahc, SCB_TAG);
+		scbp = ahc_lookup_scb(ahc, scbid);
+		if ((scbp == NULL && scbid != SCB_LIST_NULL)
+		 || (scbp != NULL
+		  && ahc_match_scb(ahc, scbp, target, channel, lun, tag, role)))
+			ahc_add_curscb_to_free_list(ahc);
+	}
+
+	/*
+	 * Go through the pending CCB list and look for
+	 * commands for this target that are still active.
+	 * These are other tagged commands that were
+	 * disconnected when the reset occurred.
+	 */
+	scbp_next = LIST_FIRST(&ahc->pending_scbs);
+	while (scbp_next != NULL) {
+		scbp = scbp_next;
+		scbp_next = LIST_NEXT(scbp, pending_links);
+		if (ahc_match_scb(ahc, scbp, target, channel, lun, tag, role)) {
+			cam_status ostat;
+
+			ostat = ahc_get_transaction_status(scbp);
+			if (ostat == CAM_REQ_INPROG)
+				ahc_set_transaction_status(scbp, status);
+			if (ahc_get_transaction_status(scbp) != CAM_REQ_CMP)
+				ahc_freeze_scb(scbp);
+			if ((scbp->flags & SCB_ACTIVE) == 0)
+				printf("Inactive SCB on pending list\n");
+			ahc_done(ahc, scbp);
+			found++;
+		}
+	}
+	ahc_outb(ahc, SCBPTR, active_scb);
+	ahc_platform_abort_scbs(ahc, target, channel, lun, tag, role, status);
+	ahc_release_untagged_queues(ahc);
+	return found;
+}
+
+static void
+ahc_reset_current_bus(struct ahc_softc *ahc)
+{
+	uint8_t scsiseq;
+
+	ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) & ~ENSCSIRST);
+	scsiseq = ahc_inb(ahc, SCSISEQ);
+	ahc_outb(ahc, SCSISEQ, scsiseq | SCSIRSTO);
+	ahc_flush_device_writes(ahc);
+	ahc_delay(AHC_BUSRESET_DELAY);
+	/* Turn off the bus reset */
+	ahc_outb(ahc, SCSISEQ, scsiseq & ~SCSIRSTO);
+
+	ahc_clear_intstat(ahc);
+
+	/* Re-enable reset interrupts */
+	ahc_outb(ahc, SIMODE1, ahc_inb(ahc, SIMODE1) | ENSCSIRST);
+}
+
+int
+ahc_reset_channel(struct ahc_softc *ahc, char channel, int initiate_reset)
+{
+	struct	ahc_devinfo devinfo;
+	u_int	initiator, target, max_scsiid;
+	u_int	sblkctl;
+	u_int	scsiseq;
+	u_int	simode1;
+	int	found;
+	int	restart_needed;
+	char	cur_channel;
+
+	ahc->pending_device = NULL;
+
+	ahc_compile_devinfo(&devinfo,
+			    CAM_TARGET_WILDCARD,
+			    CAM_TARGET_WILDCARD,
+			    CAM_LUN_WILDCARD,
+			    channel, ROLE_UNKNOWN);
+	ahc_pause(ahc);
+
+	/* Make sure the sequencer is in a safe location. */
+	ahc_clear_critical_section(ahc);
+
+	/*
+	 * Run our command complete fifos to ensure that we perform
+	 * completion processing on any commands that 'completed'
+	 * before the reset occurred.
+	 */
+	ahc_run_qoutfifo(ahc);
+#if AHC_TARGET_MODE
+	/*
+	 * XXX - In Twin mode, the tqinfifo may have commands
+	 *	 for an unaffected channel in it.  However, if
+	 *	 we have run out of ATIO resources to drain that
+	 *	 queue, we may not get them all out here.  Further,
+	 *	 the blocked transactions for the reset channel
+	 *	 should just be killed off, irrespecitve of whether
+	 *	 we are blocked on ATIO resources.  Write a routine
+	 *	 to compact the tqinfifo appropriately.
+	 */
+	if ((ahc->flags & AHC_TARGETROLE) != 0) {
+		ahc_run_tqinfifo(ahc, /*paused*/TRUE);
+	}
+#endif
+
+	/*
+	 * Reset the bus if we are initiating this reset
+	 */
+	sblkctl = ahc_inb(ahc, SBLKCTL);
+	cur_channel = 'A';
+	if ((ahc->features & AHC_TWIN) != 0
+	 && ((sblkctl & SELBUSB) != 0))
+	    cur_channel = 'B';
+	scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE);
+	if (cur_channel != channel) {
+		/* Case 1: Command for another bus is active
+		 * Stealthily reset the other bus without
+		 * upsetting the current bus.
+		 */
+		ahc_outb(ahc, SBLKCTL, sblkctl ^ SELBUSB);
+		simode1 = ahc_inb(ahc, SIMODE1) & ~(ENBUSFREE|ENSCSIRST);
+#if AHC_TARGET_MODE
+		/*
+		 * Bus resets clear ENSELI, so we cannot
+		 * defer re-enabling bus reset interrupts
+		 * if we are in target mode.
+		 */
+		if ((ahc->flags & AHC_TARGETROLE) != 0)
+			simode1 |= ENSCSIRST;
+#endif
+		ahc_outb(ahc, SIMODE1, simode1);
+		if (initiate_reset)
+			ahc_reset_current_bus(ahc);
+		ahc_clear_intstat(ahc);
+		ahc_outb(ahc, SCSISEQ, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP));
+		ahc_outb(ahc, SBLKCTL, sblkctl);
+		restart_needed = FALSE;
+	} else {
+		/* Case 2: A command from this bus is active or we're idle */
+		simode1 = ahc_inb(ahc, SIMODE1) & ~(ENBUSFREE|ENSCSIRST);
+#if AHC_TARGET_MODE
+		/*
+		 * Bus resets clear ENSELI, so we cannot
+		 * defer re-enabling bus reset interrupts
+		 * if we are in target mode.
+		 */
+		if ((ahc->flags & AHC_TARGETROLE) != 0)
+			simode1 |= ENSCSIRST;
+#endif
+		ahc_outb(ahc, SIMODE1, simode1);
+		if (initiate_reset)
+			ahc_reset_current_bus(ahc);
+		ahc_clear_intstat(ahc);
+		ahc_outb(ahc, SCSISEQ, scsiseq & (ENSELI|ENRSELI|ENAUTOATNP));
+		restart_needed = TRUE;
+	}
+
+	/*
+	 * Clean up all the state information for the
+	 * pending transactions on this bus.
+	 */
+	found = ahc_abort_scbs(ahc, CAM_TARGET_WILDCARD, channel,
+			       CAM_LUN_WILDCARD, SCB_LIST_NULL,
+			       ROLE_UNKNOWN, CAM_SCSI_BUS_RESET);
+
+	max_scsiid = (ahc->features & AHC_WIDE) ? 15 : 7;
+
+#ifdef AHC_TARGET_MODE
+	/*
+	 * Send an immediate notify ccb to all target more peripheral
+	 * drivers affected by this action.
+	 */
+	for (target = 0; target <= max_scsiid; target++) {
+		struct ahc_tmode_tstate* tstate;
+		u_int lun;
+
+		tstate = ahc->enabled_targets[target];
+		if (tstate == NULL)
+			continue;
+		for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
+			struct ahc_tmode_lstate* lstate;
+
+			lstate = tstate->enabled_luns[lun];
+			if (lstate == NULL)
+				continue;
+
+			ahc_queue_lstate_event(ahc, lstate, CAM_TARGET_WILDCARD,
+					       EVENT_TYPE_BUS_RESET, /*arg*/0);
+			ahc_send_lstate_events(ahc, lstate);
+		}
+	}
+#endif
+	/*
+	 * Revert to async/narrow transfers until we renegotiate.
+	 */
+	for (target = 0; target <= max_scsiid; target++) {
+
+		if (ahc->enabled_targets[target] == NULL)
+			continue;
+		for (initiator = 0; initiator <= max_scsiid; initiator++) {
+			struct ahc_devinfo devinfo;
+
+			ahc_compile_devinfo(&devinfo, target, initiator,
+					    CAM_LUN_WILDCARD,
+					    channel, ROLE_UNKNOWN);
+			ahc_set_width(ahc, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
+				      AHC_TRANS_CUR, /*paused*/TRUE);
+			ahc_set_syncrate(ahc, &devinfo, /*syncrate*/NULL,
+					 /*period*/0, /*offset*/0,
+					 /*ppr_options*/0, AHC_TRANS_CUR,
+					 /*paused*/TRUE);
+		}
+	}
+
+	if (restart_needed)
+		ahc_restart(ahc);
+	else
+		ahc_unpause(ahc);
+	return found;
+}
+
+
+/***************************** Residual Processing ****************************/
+/*
+ * Calculate the residual for a just completed SCB.
+ */
+void
+ahc_calc_residual(struct ahc_softc *ahc, struct scb *scb)
+{
+	struct hardware_scb *hscb;
+	struct status_pkt *spkt;
+	uint32_t sgptr;
+	uint32_t resid_sgptr;
+	uint32_t resid;
+
+	/*
+	 * 5 cases.
+	 * 1) No residual.
+	 *    SG_RESID_VALID clear in sgptr.
+	 * 2) Transferless command
+	 * 3) Never performed any transfers.
+	 *    sgptr has SG_FULL_RESID set.
+	 * 4) No residual but target did not
+	 *    save data pointers after the
+	 *    last transfer, so sgptr was
+	 *    never updated.
+	 * 5) We have a partial residual.
+	 *    Use residual_sgptr to determine
+	 *    where we are.
+	 */
+
+	hscb = scb->hscb;
+	sgptr = ahc_le32toh(hscb->sgptr);
+	if ((sgptr & SG_RESID_VALID) == 0)
+		/* Case 1 */
+		return;
+	sgptr &= ~SG_RESID_VALID;
+
+	if ((sgptr & SG_LIST_NULL) != 0)
+		/* Case 2 */
+		return;
+
+	spkt = &hscb->shared_data.status;
+	resid_sgptr = ahc_le32toh(spkt->residual_sg_ptr);
+	if ((sgptr & SG_FULL_RESID) != 0) {
+		/* Case 3 */
+		resid = ahc_get_transfer_length(scb);
+	} else if ((resid_sgptr & SG_LIST_NULL) != 0) {
+		/* Case 4 */
+		return;
+	} else if ((resid_sgptr & ~SG_PTR_MASK) != 0) {
+		panic("Bogus resid sgptr value 0x%x\n", resid_sgptr);
+	} else {
+		struct ahc_dma_seg *sg;
+
+		/*
+		 * Remainder of the SG where the transfer
+		 * stopped.  
+		 */
+		resid = ahc_le32toh(spkt->residual_datacnt) & AHC_SG_LEN_MASK;
+		sg = ahc_sg_bus_to_virt(scb, resid_sgptr & SG_PTR_MASK);
+
+		/* The residual sg_ptr always points to the next sg */
+		sg--;
+
+		/*
+		 * Add up the contents of all residual
+		 * SG segments that are after the SG where
+		 * the transfer stopped.
+		 */
+		while ((ahc_le32toh(sg->len) & AHC_DMA_LAST_SEG) == 0) {
+			sg++;
+			resid += ahc_le32toh(sg->len) & AHC_SG_LEN_MASK;
+		}
+	}
+	if ((scb->flags & SCB_SENSE) == 0)
+		ahc_set_residual(scb, resid);
+	else
+		ahc_set_sense_residual(scb, resid);
+
+#ifdef AHC_DEBUG
+	if ((ahc_debug & AHC_SHOW_MISC) != 0) {
+		ahc_print_path(ahc, scb);
+		printf("Handled %sResidual of %d bytes\n",
+		       (scb->flags & SCB_SENSE) ? "Sense " : "", resid);
+	}
+#endif
+}
+
+/******************************* Target Mode **********************************/
+#ifdef AHC_TARGET_MODE
+/*
+ * Add a target mode event to this lun's queue
+ */
+static void
+ahc_queue_lstate_event(struct ahc_softc *ahc, struct ahc_tmode_lstate *lstate,
+		       u_int initiator_id, u_int event_type, u_int event_arg)
+{
+	struct ahc_tmode_event *event;
+	int pending;
+
+	xpt_freeze_devq(lstate->path, /*count*/1);
+	if (lstate->event_w_idx >= lstate->event_r_idx)
+		pending = lstate->event_w_idx - lstate->event_r_idx;
+	else
+		pending = AHC_TMODE_EVENT_BUFFER_SIZE + 1
+			- (lstate->event_r_idx - lstate->event_w_idx);
+
+	if (event_type == EVENT_TYPE_BUS_RESET
+	 || event_type == MSG_BUS_DEV_RESET) {
+		/*
+		 * Any earlier events are irrelevant, so reset our buffer.
+		 * This has the effect of allowing us to deal with reset
+		 * floods (an external device holding down the reset line)
+		 * without losing the event that is really interesting.
+		 */
+		lstate->event_r_idx = 0;
+		lstate->event_w_idx = 0;
+		xpt_release_devq(lstate->path, pending, /*runqueue*/FALSE);
+	}
+
+	if (pending == AHC_TMODE_EVENT_BUFFER_SIZE) {
+		xpt_print_path(lstate->path);
+		printf("immediate event %x:%x lost\n",
+		       lstate->event_buffer[lstate->event_r_idx].event_type,
+		       lstate->event_buffer[lstate->event_r_idx].event_arg);
+		lstate->event_r_idx++;
+		if (lstate->event_r_idx == AHC_TMODE_EVENT_BUFFER_SIZE)
+			lstate->event_r_idx = 0;
+		xpt_release_devq(lstate->path, /*count*/1, /*runqueue*/FALSE);
+	}
+
+	event = &lstate->event_buffer[lstate->event_w_idx];
+	event->initiator_id = initiator_id;
+	event->event_type = event_type;
+	event->event_arg = event_arg;
+	lstate->event_w_idx++;
+	if (lstate->event_w_idx == AHC_TMODE_EVENT_BUFFER_SIZE)
+		lstate->event_w_idx = 0;
+}
+
+/*
+ * Send any target mode events queued up waiting
+ * for immediate notify resources.
+ */
+void
+ahc_send_lstate_events(struct ahc_softc *ahc, struct ahc_tmode_lstate *lstate)
+{
+	struct ccb_hdr *ccbh;
+	struct ccb_immed_notify *inot;
+
+	while (lstate->event_r_idx != lstate->event_w_idx
+	    && (ccbh = SLIST_FIRST(&lstate->immed_notifies)) != NULL) {
+		struct ahc_tmode_event *event;
+
+		event = &lstate->event_buffer[lstate->event_r_idx];
+		SLIST_REMOVE_HEAD(&lstate->immed_notifies, sim_links.sle);
+		inot = (struct ccb_immed_notify *)ccbh;
+		switch (event->event_type) {
+		case EVENT_TYPE_BUS_RESET:
+			ccbh->status = CAM_SCSI_BUS_RESET|CAM_DEV_QFRZN;
+			break;
+		default:
+			ccbh->status = CAM_MESSAGE_RECV|CAM_DEV_QFRZN;
+			inot->message_args[0] = event->event_type;
+			inot->message_args[1] = event->event_arg;
+			break;
+		}
+		inot->initiator_id = event->initiator_id;
+		inot->sense_len = 0;
+		xpt_done((union ccb *)inot);
+		lstate->event_r_idx++;
+		if (lstate->event_r_idx == AHC_TMODE_EVENT_BUFFER_SIZE)
+			lstate->event_r_idx = 0;
+	}
+}
+#endif
+
+/******************** Sequencer Program Patching/Download *********************/
+
+#ifdef AHC_DUMP_SEQ
+void
+ahc_dumpseq(struct ahc_softc* ahc)
+{
+	int i;
+	int max_prog;
+
+	if ((ahc->chip & AHC_BUS_MASK) < AHC_PCI)
+		max_prog = 448;
+	else if ((ahc->features & AHC_ULTRA2) != 0)
+		max_prog = 768;
+	else
+		max_prog = 512;
+
+	ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
+	ahc_outb(ahc, SEQADDR0, 0);
+	ahc_outb(ahc, SEQADDR1, 0);
+	for (i = 0; i < max_prog; i++) {
+		uint8_t ins_bytes[4];
+
+		ahc_insb(ahc, SEQRAM, ins_bytes, 4);
+		printf("0x%08x\n", ins_bytes[0] << 24
+				 | ins_bytes[1] << 16
+				 | ins_bytes[2] << 8
+				 | ins_bytes[3]);
+	}
+}
+#endif
+
+static void
+ahc_loadseq(struct ahc_softc *ahc)
+{
+	struct	cs cs_table[num_critical_sections];
+	u_int	begin_set[num_critical_sections];
+	u_int	end_set[num_critical_sections];
+	const struct	patch *cur_patch;
+	u_int	cs_count;
+	u_int	cur_cs;
+	u_int	i;
+	int	downloaded;
+	u_int	skip_addr;
+	u_int	sg_prefetch_cnt;
+	uint8_t	download_consts[7];
+
+	/*
+	 * Start out with 0 critical sections
+	 * that apply to this firmware load.
+	 */
+	cs_count = 0;
+	cur_cs = 0;
+	memset(begin_set, 0, sizeof(begin_set));
+	memset(end_set, 0, sizeof(end_set));
+
+	/* Setup downloadable constant table */
+	download_consts[QOUTFIFO_OFFSET] = 0;
+	if (ahc->targetcmds != NULL)
+		download_consts[QOUTFIFO_OFFSET] += 32;
+	download_consts[QINFIFO_OFFSET] = download_consts[QOUTFIFO_OFFSET] + 1;
+	download_consts[CACHESIZE_MASK] = ahc->pci_cachesize - 1;
+	download_consts[INVERTED_CACHESIZE_MASK] = ~(ahc->pci_cachesize - 1);
+	sg_prefetch_cnt = ahc->pci_cachesize;
+	if (sg_prefetch_cnt < (2 * sizeof(struct ahc_dma_seg)))
+		sg_prefetch_cnt = 2 * sizeof(struct ahc_dma_seg);
+	download_consts[SG_PREFETCH_CNT] = sg_prefetch_cnt;
+	download_consts[SG_PREFETCH_ALIGN_MASK] = ~(sg_prefetch_cnt - 1);
+	download_consts[SG_PREFETCH_ADDR_MASK] = (sg_prefetch_cnt - 1);
+
+	cur_patch = patches;
+	downloaded = 0;
+	skip_addr = 0;
+	ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE|LOADRAM);
+	ahc_outb(ahc, SEQADDR0, 0);
+	ahc_outb(ahc, SEQADDR1, 0);
+
+	for (i = 0; i < sizeof(seqprog)/4; i++) {
+		if (ahc_check_patch(ahc, &cur_patch, i, &skip_addr) == 0) {
+			/*
+			 * Don't download this instruction as it
+			 * is in a patch that was removed.
+			 */
+			continue;
+		}
+		/*
+		 * Move through the CS table until we find a CS
+		 * that might apply to this instruction.
+		 */
+		for (; cur_cs < num_critical_sections; cur_cs++) {
+			if (critical_sections[cur_cs].end <= i) {
+				if (begin_set[cs_count] == TRUE
+				 && end_set[cs_count] == FALSE) {
+					cs_table[cs_count].end = downloaded;
+				 	end_set[cs_count] = TRUE;
+					cs_count++;
+				}
+				continue;
+			}
+			if (critical_sections[cur_cs].begin <= i
+			 && begin_set[cs_count] == FALSE) {
+				cs_table[cs_count].begin = downloaded;
+				begin_set[cs_count] = TRUE;
+			}
+			break;
+		}
+		ahc_download_instr(ahc, i, download_consts);
+		downloaded++;
+	}
+
+	ahc->num_critical_sections = cs_count;
+	if (cs_count != 0) {
+
+		cs_count *= sizeof(struct cs);
+		ahc->critical_sections = malloc(cs_count, M_DEVBUF, M_NOWAIT);
+		if (ahc->critical_sections == NULL)
+			panic("ahc_loadseq: Could not malloc");
+		memcpy(ahc->critical_sections, cs_table, cs_count);
+	}
+	ahc_outb(ahc, SEQCTL, PERRORDIS|FAILDIS|FASTMODE);
+	ahc_restart(ahc);
+
+	if (bootverbose) {
+		printf(" %d instructions downloaded\n", downloaded);
+		printf("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n",
+		       ahc_name(ahc), ahc->features, ahc->bugs, ahc->flags);
+	}
+}
+
+static int
+ahc_check_patch(struct ahc_softc *ahc, const struct patch **start_patch,
+		u_int start_instr, u_int *skip_addr)
+{
+	const struct	patch *cur_patch;
+	const struct	patch *last_patch;
+	u_int	num_patches;
+
+	num_patches = sizeof(patches)/sizeof(struct patch);
+	last_patch = &patches[num_patches];
+	cur_patch = *start_patch;
+
+	while (cur_patch < last_patch && start_instr == cur_patch->begin) {
+
+		if (cur_patch->patch_func(ahc) == 0) {
+
+			/* Start rejecting code */
+			*skip_addr = start_instr + cur_patch->skip_instr;
+			cur_patch += cur_patch->skip_patch;
+		} else {
+			/* Accepted this patch.  Advance to the next
+			 * one and wait for our intruction pointer to
+			 * hit this point.
+			 */
+			cur_patch++;
+		}
+	}
+
+	*start_patch = cur_patch;
+	if (start_instr < *skip_addr)
+		/* Still skipping */
+		return (0);
+
+	return (1);
+}
+
+static void
+ahc_download_instr(struct ahc_softc *ahc, u_int instrptr, uint8_t *dconsts)
+{
+	union	ins_formats instr;
+	struct	ins_format1 *fmt1_ins;
+	struct	ins_format3 *fmt3_ins;
+	u_int	opcode;
+
+	/*
+	 * The firmware is always compiled into a little endian format.
+	 */
+	instr.integer = ahc_le32toh(*(uint32_t*)&seqprog[instrptr * 4]);
+
+	fmt1_ins = &instr.format1;
+	fmt3_ins = NULL;
+
+	/* Pull the opcode */
+	opcode = instr.format1.opcode;
+	switch (opcode) {
+	case AIC_OP_JMP:
+	case AIC_OP_JC:
+	case AIC_OP_JNC:
+	case AIC_OP_CALL:
+	case AIC_OP_JNE:
+	case AIC_OP_JNZ:
+	case AIC_OP_JE:
+	case AIC_OP_JZ:
+	{
+		const struct patch *cur_patch;
+		int address_offset;
+		u_int address;
+		u_int skip_addr;
+		u_int i;
+
+		fmt3_ins = &instr.format3;
+		address_offset = 0;
+		address = fmt3_ins->address;
+		cur_patch = patches;
+		skip_addr = 0;
+		for (i = 0; i < address;) {
+			ahc_check_patch(ahc, &cur_patch, i, &skip_addr);
+
+			if (skip_addr > i) {
+				int end_addr;
+
+				end_addr = MIN(address, skip_addr);
+				address_offset += end_addr - i;
+				i = skip_addr;
+			} else {
+				i++;
+			}
+		}
+		address -= address_offset;
+		fmt3_ins->address = address;
+		/* FALLTHROUGH */
+	}
+	case AIC_OP_OR:
+	case AIC_OP_AND:
+	case AIC_OP_XOR:
+	case AIC_OP_ADD:
+	case AIC_OP_ADC:
+	case AIC_OP_BMOV:
+		if (fmt1_ins->parity != 0) {
+			fmt1_ins->immediate = dconsts[fmt1_ins->immediate];
+		}
+		fmt1_ins->parity = 0;
+		if ((ahc->features & AHC_CMD_CHAN) == 0
+		 && opcode == AIC_OP_BMOV) {
+			/*
+			 * Block move was added at the same time
+			 * as the command channel.  Verify that
+			 * this is only a move of a single element
+			 * and convert the BMOV to a MOV
+			 * (AND with an immediate of FF).
+			 */
+			if (fmt1_ins->immediate != 1)
+				panic("%s: BMOV not supported",
+				      ahc_name(ahc));
+			fmt1_ins->opcode = AIC_OP_AND;
+			fmt1_ins->immediate = 0xff;
+		}
+		/* FALLTHROUGH */
+	case AIC_OP_ROL:
+		if ((ahc->features & AHC_ULTRA2) != 0) {
+			int i, count;
+
+			/* Calculate odd parity for the instruction */
+			for (i = 0, count = 0; i < 31; i++) {
+				uint32_t mask;
+
+				mask = 0x01 << i;
+				if ((instr.integer & mask) != 0)
+					count++;
+			}
+			if ((count & 0x01) == 0)
+				instr.format1.parity = 1;
+		} else {
+			/* Compress the instruction for older sequencers */
+			if (fmt3_ins != NULL) {
+				instr.integer =
+					fmt3_ins->immediate
+				      | (fmt3_ins->source << 8)
+				      | (fmt3_ins->address << 16)
+				      |	(fmt3_ins->opcode << 25);
+			} else {
+				instr.integer =
+					fmt1_ins->immediate
+				      | (fmt1_ins->source << 8)
+				      | (fmt1_ins->destination << 16)
+				      |	(fmt1_ins->ret << 24)
+				      |	(fmt1_ins->opcode << 25);
+			}
+		}
+		/* The sequencer is a little endian cpu */
+		instr.integer = ahc_htole32(instr.integer);
+		ahc_outsb(ahc, SEQRAM, instr.bytes, 4);
+		break;
+	default:
+		panic("Unknown opcode encountered in seq program");
+		break;
+	}
+}
+
+int
+ahc_print_register(ahc_reg_parse_entry_t *table, u_int num_entries,
+		   const char *name, u_int address, u_int value,
+		   u_int *cur_column, u_int wrap_point)
+{
+	int	printed;
+	u_int	printed_mask;
+	char    line[1024];
+
+	line[0] = 0;
+
+	if (cur_column != NULL && *cur_column >= wrap_point) {
+		printf("\n");
+		*cur_column = 0;
+	}
+	printed = snprintf(line, sizeof(line), "%s[0x%x]", name, value);
+	if (table == NULL) {
+		printed += snprintf(&line[printed], (sizeof line) - printed,
+		    " ");
+		printf("%s", line);
+		if (cur_column != NULL)
+			*cur_column += printed;
+		return (printed);
+	}
+	printed_mask = 0;
+	while (printed_mask != 0xFF) {
+		int entry;
+
+		for (entry = 0; entry < num_entries; entry++) {
+			if (((value & table[entry].mask)
+			  != table[entry].value)
+			 || ((printed_mask & table[entry].mask)
+			  == table[entry].mask))
+				continue;
+			printed += snprintf(&line[printed],
+			    (sizeof line) - printed, "%s%s", 
+				printed_mask == 0 ? ":(" : "|",
+				table[entry].name);
+			printed_mask |= table[entry].mask;
+			
+			break;
+		}
+		if (entry >= num_entries)
+			break;
+	}
+	if (printed_mask != 0)
+		printed += snprintf(&line[printed],
+		    (sizeof line) - printed, ") ");
+	else
+		printed += snprintf(&line[printed],
+		    (sizeof line) - printed, " ");
+	if (cur_column != NULL)
+		*cur_column += printed;
+	printf("%s", line);
+
+	return (printed);
+}
+
+void
+ahc_dump_card_state(struct ahc_softc *ahc)
+{
+	struct	scb *scb;
+	struct	scb_tailq *untagged_q;
+	u_int	cur_col;
+	int	paused;
+	int	target;
+	int	maxtarget;
+	int	i;
+	uint8_t last_phase;
+	uint8_t qinpos;
+	uint8_t qintail;
+	uint8_t qoutpos;
+	uint8_t scb_index;
+	uint8_t saved_scbptr;
+
+	if (ahc_is_paused(ahc)) {
+		paused = 1;
+	} else {
+		paused = 0;
+		ahc_pause(ahc);
+	}
+
+	saved_scbptr = ahc_inb(ahc, SCBPTR);
+	last_phase = ahc_inb(ahc, LASTPHASE);
+	printf(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n"
+	       "%s: Dumping Card State %s, at SEQADDR 0x%x\n",
+	       ahc_name(ahc), ahc_lookup_phase_entry(last_phase)->phasemsg,
+	       ahc_inb(ahc, SEQADDR0) | (ahc_inb(ahc, SEQADDR1) << 8));
+	if (paused)
+		printf("Card was paused\n");
+	printf("ACCUM = 0x%x, SINDEX = 0x%x, DINDEX = 0x%x, ARG_2 = 0x%x\n",
+	       ahc_inb(ahc, ACCUM), ahc_inb(ahc, SINDEX), ahc_inb(ahc, DINDEX),
+	       ahc_inb(ahc, ARG_2));
+	printf("HCNT = 0x%x SCBPTR = 0x%x\n", ahc_inb(ahc, HCNT),
+	       ahc_inb(ahc, SCBPTR));
+	cur_col = 0;
+	if ((ahc->features & AHC_DT) != 0)
+		ahc_scsiphase_print(ahc_inb(ahc, SCSIPHASE), &cur_col, 50);
+	ahc_scsisigi_print(ahc_inb(ahc, SCSISIGI), &cur_col, 50);
+	ahc_error_print(ahc_inb(ahc, ERROR), &cur_col, 50);
+	ahc_scsibusl_print(ahc_inb(ahc, SCSIBUSL), &cur_col, 50);
+	ahc_lastphase_print(ahc_inb(ahc, LASTPHASE), &cur_col, 50);
+	ahc_scsiseq_print(ahc_inb(ahc, SCSISEQ), &cur_col, 50);
+	ahc_sblkctl_print(ahc_inb(ahc, SBLKCTL), &cur_col, 50);
+	ahc_scsirate_print(ahc_inb(ahc, SCSIRATE), &cur_col, 50);
+	ahc_seqctl_print(ahc_inb(ahc, SEQCTL), &cur_col, 50);
+	ahc_seq_flags_print(ahc_inb(ahc, SEQ_FLAGS), &cur_col, 50);
+	ahc_sstat0_print(ahc_inb(ahc, SSTAT0), &cur_col, 50);
+	ahc_sstat1_print(ahc_inb(ahc, SSTAT1), &cur_col, 50);
+	ahc_sstat2_print(ahc_inb(ahc, SSTAT2), &cur_col, 50);
+	ahc_sstat3_print(ahc_inb(ahc, SSTAT3), &cur_col, 50);
+	ahc_simode0_print(ahc_inb(ahc, SIMODE0), &cur_col, 50);
+	ahc_simode1_print(ahc_inb(ahc, SIMODE1), &cur_col, 50);
+	ahc_sxfrctl0_print(ahc_inb(ahc, SXFRCTL0), &cur_col, 50);
+	ahc_dfcntrl_print(ahc_inb(ahc, DFCNTRL), &cur_col, 50);
+	ahc_dfstatus_print(ahc_inb(ahc, DFSTATUS), &cur_col, 50);
+	if (cur_col != 0)
+		printf("\n");
+	printf("STACK:");
+	for (i = 0; i < STACK_SIZE; i++)
+	       printf(" 0x%x", ahc_inb(ahc, STACK)|(ahc_inb(ahc, STACK) << 8));
+	printf("\nSCB count = %d\n", ahc->scb_data->numscbs);
+	printf("Kernel NEXTQSCB = %d\n", ahc->next_queued_scb->hscb->tag);
+	printf("Card NEXTQSCB = %d\n", ahc_inb(ahc, NEXT_QUEUED_SCB));
+	/* QINFIFO */
+	printf("QINFIFO entries: ");
+	if ((ahc->features & AHC_QUEUE_REGS) != 0) {
+		qinpos = ahc_inb(ahc, SNSCB_QOFF);
+		ahc_outb(ahc, SNSCB_QOFF, qinpos);
+	} else
+		qinpos = ahc_inb(ahc, QINPOS);
+	qintail = ahc->qinfifonext;
+	while (qinpos != qintail) {
+		printf("%d ", ahc->qinfifo[qinpos]);
+		qinpos++;
+	}
+	printf("\n");
+
+	printf("Waiting Queue entries: ");
+	scb_index = ahc_inb(ahc, WAITING_SCBH);
+	i = 0;
+	while (scb_index != SCB_LIST_NULL && i++ < 256) {
+		ahc_outb(ahc, SCBPTR, scb_index);
+		printf("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG));
+		scb_index = ahc_inb(ahc, SCB_NEXT);
+	}
+	printf("\n");
+
+	printf("Disconnected Queue entries: ");
+	scb_index = ahc_inb(ahc, DISCONNECTED_SCBH);
+	i = 0;
+	while (scb_index != SCB_LIST_NULL && i++ < 256) {
+		ahc_outb(ahc, SCBPTR, scb_index);
+		printf("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG));
+		scb_index = ahc_inb(ahc, SCB_NEXT);
+	}
+	printf("\n");
+		
+	ahc_sync_qoutfifo(ahc, BUS_DMASYNC_POSTREAD);
+	printf("QOUTFIFO entries: ");
+	qoutpos = ahc->qoutfifonext;
+	i = 0;
+	while (ahc->qoutfifo[qoutpos] != SCB_LIST_NULL && i++ < 256) {
+		printf("%d ", ahc->qoutfifo[qoutpos]);
+		qoutpos++;
+	}
+	printf("\n");
+
+	printf("Sequencer Free SCB List: ");
+	scb_index = ahc_inb(ahc, FREE_SCBH);
+	i = 0;
+	while (scb_index != SCB_LIST_NULL && i++ < 256) {
+		ahc_outb(ahc, SCBPTR, scb_index);
+		printf("%d ", scb_index);
+		scb_index = ahc_inb(ahc, SCB_NEXT);
+	}
+	printf("\n");
+
+	printf("Sequencer SCB Info: ");
+	for (i = 0; i < ahc->scb_data->maxhscbs; i++) {
+		ahc_outb(ahc, SCBPTR, i);
+		/*cur_col =*/ printf("\n%3d ", i);
+
+		ahc_scb_control_print(ahc_inb(ahc, SCB_CONTROL), &cur_col, 60);
+		ahc_scb_scsiid_print(ahc_inb(ahc, SCB_SCSIID), &cur_col, 60);
+		ahc_scb_lun_print(ahc_inb(ahc, SCB_LUN), &cur_col, 60);
+		ahc_scb_tag_print(ahc_inb(ahc, SCB_TAG), &cur_col, 60);
+	}
+	printf("\n");
+
+	printf("Pending list: ");
+	i = 0;
+	LIST_FOREACH(scb, &ahc->pending_scbs, pending_links) {
+		if (i++ > 256)
+			break;
+		/*cur_col =*/ printf("\n%3d ", scb->hscb->tag);
+		ahc_scb_control_print(scb->hscb->control, &cur_col, 60);
+		ahc_scb_scsiid_print(scb->hscb->scsiid, &cur_col, 60);
+		ahc_scb_lun_print(scb->hscb->lun, &cur_col, 60);
+		if ((ahc->flags & AHC_PAGESCBS) == 0) {
+			ahc_outb(ahc, SCBPTR, scb->hscb->tag);
+			printf("(");
+			ahc_scb_control_print(ahc_inb(ahc, SCB_CONTROL),
+					      &cur_col, 60);
+			ahc_scb_tag_print(ahc_inb(ahc, SCB_TAG), &cur_col, 60);
+			printf(")");
+		}
+	}
+	printf("\n");
+
+	printf("Kernel Free SCB list: ");
+	i = 0;
+	SLIST_FOREACH(scb, &ahc->scb_data->free_scbs, links.sle) {
+		if (i++ > 256)
+			break;
+		printf("%d ", scb->hscb->tag);
+	}
+	printf("\n");
+
+	maxtarget = (ahc->features & (AHC_WIDE|AHC_TWIN)) ? 15 : 7;
+	for (target = 0; target <= maxtarget; target++) {
+		untagged_q = &ahc->untagged_queues[target];
+		if (TAILQ_FIRST(untagged_q) == NULL)
+			continue;
+		printf("Untagged Q(%d): ", target);
+		i = 0;
+		TAILQ_FOREACH(scb, untagged_q, links.tqe) {
+			if (i++ > 256)
+				break;
+			printf("%d ", scb->hscb->tag);
+		}
+		printf("\n");
+	}
+
+	ahc_platform_dump_card_state(ahc);
+	printf("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n");
+	ahc_outb(ahc, SCBPTR, saved_scbptr);
+	if (paused == 0)
+		ahc_unpause(ahc);
+}
+
+/************************* Target Mode ****************************************/
+#ifdef AHC_TARGET_MODE
+cam_status
+ahc_find_tmode_devs(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb,
+		    struct ahc_tmode_tstate **tstate,
+		    struct ahc_tmode_lstate **lstate,
+		    int notfound_failure)
+{
+
+	if ((ahc->features & AHC_TARGETMODE) == 0)
+		return (CAM_REQ_INVALID);
+
+	/*
+	 * Handle the 'black hole' device that sucks up
+	 * requests to unattached luns on enabled targets.
+	 */
+	if (ccb->ccb_h.target_id == CAM_TARGET_WILDCARD
+	 && ccb->ccb_h.target_lun == CAM_LUN_WILDCARD) {
+		*tstate = NULL;
+		*lstate = ahc->black_hole;
+	} else {
+		u_int max_id;
+
+		max_id = (ahc->features & AHC_WIDE) ? 15 : 7;
+		if (ccb->ccb_h.target_id > max_id)
+			return (CAM_TID_INVALID);
+
+		if (ccb->ccb_h.target_lun >= AHC_NUM_LUNS)
+			return (CAM_LUN_INVALID);
+
+		*tstate = ahc->enabled_targets[ccb->ccb_h.target_id];
+		*lstate = NULL;
+		if (*tstate != NULL)
+			*lstate =
+			    (*tstate)->enabled_luns[ccb->ccb_h.target_lun];
+	}
+
+	if (notfound_failure != 0 && *lstate == NULL)
+		return (CAM_PATH_INVALID);
+
+	return (CAM_REQ_CMP);
+}
+
+void
+ahc_handle_en_lun(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb)
+{
+	struct	   ahc_tmode_tstate *tstate;
+	struct	   ahc_tmode_lstate *lstate;
+	struct	   ccb_en_lun *cel;
+	cam_status status;
+	u_int	   target;
+	u_int	   lun;
+	u_int	   target_mask;
+	u_int	   our_id;
+	u_long	   s;
+	char	   channel;
+
+	status = ahc_find_tmode_devs(ahc, sim, ccb, &tstate, &lstate,
+				     /*notfound_failure*/FALSE);
+
+	if (status != CAM_REQ_CMP) {
+		ccb->ccb_h.status = status;
+		return;
+	}
+
+	if (cam_sim_bus(sim) == 0)
+		our_id = ahc->our_id;
+	else
+		our_id = ahc->our_id_b;
+
+	if (ccb->ccb_h.target_id != our_id) {
+		/*
+		 * our_id represents our initiator ID, or
+		 * the ID of the first target to have an
+		 * enabled lun in target mode.  There are
+		 * two cases that may preclude enabling a
+		 * target id other than our_id.
+		 *
+		 *   o our_id is for an active initiator role.
+		 *     Since the hardware does not support
+		 *     reselections to the initiator role at
+		 *     anything other than our_id, and our_id
+		 *     is used by the hardware to indicate the
+		 *     ID to use for both select-out and
+		 *     reselect-out operations, the only target
+		 *     ID we can support in this mode is our_id.
+		 *
+		 *   o The MULTARGID feature is not available and
+		 *     a previous target mode ID has been enabled.
+		 */
+		if ((ahc->features & AHC_MULTIROLE) != 0) {
+
+			if ((ahc->features & AHC_MULTI_TID) != 0
+		   	 && (ahc->flags & AHC_INITIATORROLE) != 0) {
+				/*
+				 * Only allow additional targets if
+				 * the initiator role is disabled.
+				 * The hardware cannot handle a re-select-in
+				 * on the initiator id during a re-select-out
+				 * on a different target id.
+				 */
+				status = CAM_TID_INVALID;
+			} else if ((ahc->flags & AHC_INITIATORROLE) != 0
+				|| ahc->enabled_luns > 0) {
+				/*
+				 * Only allow our target id to change
+				 * if the initiator role is not configured
+				 * and there are no enabled luns which
+				 * are attached to the currently registered
+				 * scsi id.
+				 */
+				status = CAM_TID_INVALID;
+			}
+		} else if ((ahc->features & AHC_MULTI_TID) == 0
+			&& ahc->enabled_luns > 0) {
+
+			status = CAM_TID_INVALID;
+		}
+	}
+
+	if (status != CAM_REQ_CMP) {
+		ccb->ccb_h.status = status;
+		return;
+	}
+
+	/*
+	 * We now have an id that is valid.
+	 * If we aren't in target mode, switch modes.
+	 */
+	if ((ahc->flags & AHC_TARGETROLE) == 0
+	 && ccb->ccb_h.target_id != CAM_TARGET_WILDCARD) {
+		u_long	s;
+
+		printf("Configuring Target Mode\n");
+		ahc_lock(ahc, &s);
+		if (LIST_FIRST(&ahc->pending_scbs) != NULL) {
+			ccb->ccb_h.status = CAM_BUSY;
+			ahc_unlock(ahc, &s);
+			return;
+		}
+		ahc->flags |= AHC_TARGETROLE;
+		if ((ahc->features & AHC_MULTIROLE) == 0)
+			ahc->flags &= ~AHC_INITIATORROLE;
+		ahc_pause(ahc);
+		ahc_loadseq(ahc);
+		ahc_unlock(ahc, &s);
+	}
+	cel = &ccb->cel;
+	target = ccb->ccb_h.target_id;
+	lun = ccb->ccb_h.target_lun;
+	channel = SIM_CHANNEL(ahc, sim);
+	target_mask = 0x01 << target;
+	if (channel == 'B')
+		target_mask <<= 8;
+
+	if (cel->enable != 0) {
+		u_int scsiseq;
+
+		/* Are we already enabled?? */
+		if (lstate != NULL) {
+			xpt_print_path(ccb->ccb_h.path);
+			printf("Lun already enabled\n");
+			ccb->ccb_h.status = CAM_LUN_ALRDY_ENA;
+			return;
+		}
+
+		if (cel->grp6_len != 0
+		 || cel->grp7_len != 0) {
+			/*
+			 * Don't (yet?) support vendor
+			 * specific commands.
+			 */
+			ccb->ccb_h.status = CAM_REQ_INVALID;
+			printf("Non-zero Group Codes\n");
+			return;
+		}
+
+		/*
+		 * Seems to be okay.
+		 * Setup our data structures.
+		 */
+		if (target != CAM_TARGET_WILDCARD && tstate == NULL) {
+			tstate = ahc_alloc_tstate(ahc, target, channel);
+			if (tstate == NULL) {
+				xpt_print_path(ccb->ccb_h.path);
+				printf("Couldn't allocate tstate\n");
+				ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
+				return;
+			}
+		}
+		lstate = malloc(sizeof(*lstate), M_DEVBUF, M_NOWAIT);
+		if (lstate == NULL) {
+			xpt_print_path(ccb->ccb_h.path);
+			printf("Couldn't allocate lstate\n");
+			ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
+			return;
+		}
+		memset(lstate, 0, sizeof(*lstate));
+		status = xpt_create_path(&lstate->path, /*periph*/NULL,
+					 xpt_path_path_id(ccb->ccb_h.path),
+					 xpt_path_target_id(ccb->ccb_h.path),
+					 xpt_path_lun_id(ccb->ccb_h.path));
+		if (status != CAM_REQ_CMP) {
+			free(lstate, M_DEVBUF);
+			xpt_print_path(ccb->ccb_h.path);
+			printf("Couldn't allocate path\n");
+			ccb->ccb_h.status = CAM_RESRC_UNAVAIL;
+			return;
+		}
+		SLIST_INIT(&lstate->accept_tios);
+		SLIST_INIT(&lstate->immed_notifies);
+		ahc_lock(ahc, &s);
+		ahc_pause(ahc);
+		if (target != CAM_TARGET_WILDCARD) {
+			tstate->enabled_luns[lun] = lstate;
+			ahc->enabled_luns++;
+
+			if ((ahc->features & AHC_MULTI_TID) != 0) {
+				u_int targid_mask;
+
+				targid_mask = ahc_inb(ahc, TARGID)
+					    | (ahc_inb(ahc, TARGID + 1) << 8);
+
+				targid_mask |= target_mask;
+				ahc_outb(ahc, TARGID, targid_mask);
+				ahc_outb(ahc, TARGID+1, (targid_mask >> 8));
+				
+				ahc_update_scsiid(ahc, targid_mask);
+			} else {
+				u_int our_id;
+				char  channel;
+
+				channel = SIM_CHANNEL(ahc, sim);
+				our_id = SIM_SCSI_ID(ahc, sim);
+
+				/*
+				 * This can only happen if selections
+				 * are not enabled
+				 */
+				if (target != our_id) {
+					u_int sblkctl;
+					char  cur_channel;
+					int   swap;
+
+					sblkctl = ahc_inb(ahc, SBLKCTL);
+					cur_channel = (sblkctl & SELBUSB)
+						    ? 'B' : 'A';
+					if ((ahc->features & AHC_TWIN) == 0)
+						cur_channel = 'A';
+					swap = cur_channel != channel;
+					if (channel == 'A')
+						ahc->our_id = target;
+					else
+						ahc->our_id_b = target;
+
+					if (swap)
+						ahc_outb(ahc, SBLKCTL,
+							 sblkctl ^ SELBUSB);
+
+					ahc_outb(ahc, SCSIID, target);
+
+					if (swap)
+						ahc_outb(ahc, SBLKCTL, sblkctl);
+				}
+			}
+		} else
+			ahc->black_hole = lstate;
+		/* Allow select-in operations */
+		if (ahc->black_hole != NULL && ahc->enabled_luns > 0) {
+			scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE);
+			scsiseq |= ENSELI;
+			ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq);
+			scsiseq = ahc_inb(ahc, SCSISEQ);
+			scsiseq |= ENSELI;
+			ahc_outb(ahc, SCSISEQ, scsiseq);
+		}
+		ahc_unpause(ahc);
+		ahc_unlock(ahc, &s);
+		ccb->ccb_h.status = CAM_REQ_CMP;
+		xpt_print_path(ccb->ccb_h.path);
+		printf("Lun now enabled for target mode\n");
+	} else {
+		struct scb *scb;
+		int i, empty;
+
+		if (lstate == NULL) {
+			ccb->ccb_h.status = CAM_LUN_INVALID;
+			return;
+		}
+
+		ahc_lock(ahc, &s);
+		
+		ccb->ccb_h.status = CAM_REQ_CMP;
+		LIST_FOREACH(scb, &ahc->pending_scbs, pending_links) {
+			struct ccb_hdr *ccbh;
+
+			ccbh = &scb->io_ctx->ccb_h;
+			if (ccbh->func_code == XPT_CONT_TARGET_IO
+			 && !xpt_path_comp(ccbh->path, ccb->ccb_h.path)){
+				printf("CTIO pending\n");
+				ccb->ccb_h.status = CAM_REQ_INVALID;
+				ahc_unlock(ahc, &s);
+				return;
+			}
+		}
+
+		if (SLIST_FIRST(&lstate->accept_tios) != NULL) {
+			printf("ATIOs pending\n");
+			ccb->ccb_h.status = CAM_REQ_INVALID;
+		}
+
+		if (SLIST_FIRST(&lstate->immed_notifies) != NULL) {
+			printf("INOTs pending\n");
+			ccb->ccb_h.status = CAM_REQ_INVALID;
+		}
+
+		if (ccb->ccb_h.status != CAM_REQ_CMP) {
+			ahc_unlock(ahc, &s);
+			return;
+		}
+
+		xpt_print_path(ccb->ccb_h.path);
+		printf("Target mode disabled\n");
+		xpt_free_path(lstate->path);
+		free(lstate, M_DEVBUF);
+
+		ahc_pause(ahc);
+		/* Can we clean up the target too? */
+		if (target != CAM_TARGET_WILDCARD) {
+			tstate->enabled_luns[lun] = NULL;
+			ahc->enabled_luns--;
+			for (empty = 1, i = 0; i < 8; i++)
+				if (tstate->enabled_luns[i] != NULL) {
+					empty = 0;
+					break;
+				}
+
+			if (empty) {
+				ahc_free_tstate(ahc, target, channel,
+						/*force*/FALSE);
+				if (ahc->features & AHC_MULTI_TID) {
+					u_int targid_mask;
+
+					targid_mask = ahc_inb(ahc, TARGID)
+						    | (ahc_inb(ahc, TARGID + 1)
+						       << 8);
+
+					targid_mask &= ~target_mask;
+					ahc_outb(ahc, TARGID, targid_mask);
+					ahc_outb(ahc, TARGID+1,
+					 	 (targid_mask >> 8));
+					ahc_update_scsiid(ahc, targid_mask);
+				}
+			}
+		} else {
+
+			ahc->black_hole = NULL;
+
+			/*
+			 * We can't allow selections without
+			 * our black hole device.
+			 */
+			empty = TRUE;
+		}
+		if (ahc->enabled_luns == 0) {
+			/* Disallow select-in */
+			u_int scsiseq;
+
+			scsiseq = ahc_inb(ahc, SCSISEQ_TEMPLATE);
+			scsiseq &= ~ENSELI;
+			ahc_outb(ahc, SCSISEQ_TEMPLATE, scsiseq);
+			scsiseq = ahc_inb(ahc, SCSISEQ);
+			scsiseq &= ~ENSELI;
+			ahc_outb(ahc, SCSISEQ, scsiseq);
+
+			if ((ahc->features & AHC_MULTIROLE) == 0) {
+				printf("Configuring Initiator Mode\n");
+				ahc->flags &= ~AHC_TARGETROLE;
+				ahc->flags |= AHC_INITIATORROLE;
+				ahc_pause(ahc);
+				ahc_loadseq(ahc);
+			}
+		}
+		ahc_unpause(ahc);
+		ahc_unlock(ahc, &s);
+	}
+}
+
+static void
+ahc_update_scsiid(struct ahc_softc *ahc, u_int targid_mask)
+{
+	u_int scsiid_mask;
+	u_int scsiid;
+
+	if ((ahc->features & AHC_MULTI_TID) == 0)
+		panic("ahc_update_scsiid called on non-multitid unit");
+
+	/*
+	 * Since we will rely on the TARGID mask
+	 * for selection enables, ensure that OID
+	 * in SCSIID is not set to some other ID
+	 * that we don't want to allow selections on.
+	 */
+	if ((ahc->features & AHC_ULTRA2) != 0)
+		scsiid = ahc_inb(ahc, SCSIID_ULTRA2);
+	else
+		scsiid = ahc_inb(ahc, SCSIID);
+	scsiid_mask = 0x1 << (scsiid & OID);
+	if ((targid_mask & scsiid_mask) == 0) {
+		u_int our_id;
+
+		/* ffs counts from 1 */
+		our_id = ffs(targid_mask);
+		if (our_id == 0)
+			our_id = ahc->our_id;
+		else
+			our_id--;
+		scsiid &= TID;
+		scsiid |= our_id;
+	}
+	if ((ahc->features & AHC_ULTRA2) != 0)
+		ahc_outb(ahc, SCSIID_ULTRA2, scsiid);
+	else
+		ahc_outb(ahc, SCSIID, scsiid);
+}
+
+void
+ahc_run_tqinfifo(struct ahc_softc *ahc, int paused)
+{
+	struct target_cmd *cmd;
+
+	/*
+	 * If the card supports auto-access pause,
+	 * we can access the card directly regardless
+	 * of whether it is paused or not.
+	 */
+	if ((ahc->features & AHC_AUTOPAUSE) != 0)
+		paused = TRUE;
+
+	ahc_sync_tqinfifo(ahc, BUS_DMASYNC_POSTREAD);
+	while ((cmd = &ahc->targetcmds[ahc->tqinfifonext])->cmd_valid != 0) {
+
+		/*
+		 * Only advance through the queue if we
+		 * have the resources to process the command.
+		 */
+		if (ahc_handle_target_cmd(ahc, cmd) != 0)
+			break;
+
+		cmd->cmd_valid = 0;
+		ahc_dmamap_sync(ahc, ahc->parent_dmat/*shared_data_dmat*/,
+				ahc->shared_data_dmamap,
+				ahc_targetcmd_offset(ahc, ahc->tqinfifonext),
+				sizeof(struct target_cmd),
+				BUS_DMASYNC_PREREAD);
+		ahc->tqinfifonext++;
+
+		/*
+		 * Lazily update our position in the target mode incoming
+		 * command queue as seen by the sequencer.
+		 */
+		if ((ahc->tqinfifonext & (HOST_TQINPOS - 1)) == 1) {
+			if ((ahc->features & AHC_HS_MAILBOX) != 0) {
+				u_int hs_mailbox;
+
+				hs_mailbox = ahc_inb(ahc, HS_MAILBOX);
+				hs_mailbox &= ~HOST_TQINPOS;
+				hs_mailbox |= ahc->tqinfifonext & HOST_TQINPOS;
+				ahc_outb(ahc, HS_MAILBOX, hs_mailbox);
+			} else {
+				if (!paused)
+					ahc_pause(ahc);	
+				ahc_outb(ahc, KERNEL_TQINPOS,
+					 ahc->tqinfifonext & HOST_TQINPOS);
+				if (!paused)
+					ahc_unpause(ahc);
+			}
+		}
+	}
+}
+
+static int
+ahc_handle_target_cmd(struct ahc_softc *ahc, struct target_cmd *cmd)
+{
+	struct	  ahc_tmode_tstate *tstate;
+	struct	  ahc_tmode_lstate *lstate;
+	struct	  ccb_accept_tio *atio;
+	uint8_t *byte;
+	int	  initiator;
+	int	  target;
+	int	  lun;
+
+	initiator = SCSIID_TARGET(ahc, cmd->scsiid);
+	target = SCSIID_OUR_ID(cmd->scsiid);
+	lun    = (cmd->identify & MSG_IDENTIFY_LUNMASK);
+
+	byte = cmd->bytes;
+	tstate = ahc->enabled_targets[target];
+	lstate = NULL;
+	if (tstate != NULL)
+		lstate = tstate->enabled_luns[lun];
+
+	/*
+	 * Commands for disabled luns go to the black hole driver.
+	 */
+	if (lstate == NULL)
+		lstate = ahc->black_hole;
+
+	atio = (struct ccb_accept_tio*)SLIST_FIRST(&lstate->accept_tios);
+	if (atio == NULL) {
+		ahc->flags |= AHC_TQINFIFO_BLOCKED;
+		/*
+		 * Wait for more ATIOs from the peripheral driver for this lun.
+		 */
+		if (bootverbose)
+			printf("%s: ATIOs exhausted\n", ahc_name(ahc));
+		return (1);
+	} else
+		ahc->flags &= ~AHC_TQINFIFO_BLOCKED;
+#if 0
+	printf("Incoming command from %d for %d:%d%s\n",
+	       initiator, target, lun,
+	       lstate == ahc->black_hole ? "(Black Holed)" : "");
+#endif
+	SLIST_REMOVE_HEAD(&lstate->accept_tios, sim_links.sle);
+
+	if (lstate == ahc->black_hole) {
+		/* Fill in the wildcards */
+		atio->ccb_h.target_id = target;
+		atio->ccb_h.target_lun = lun;
+	}
+
+	/*
+	 * Package it up and send it off to
+	 * whomever has this lun enabled.
+	 */
+	atio->sense_len = 0;
+	atio->init_id = initiator;
+	if (byte[0] != 0xFF) {
+		/* Tag was included */
+		atio->tag_action = *byte++;
+		atio->tag_id = *byte++;
+		atio->ccb_h.flags = CAM_TAG_ACTION_VALID;
+	} else {
+		atio->ccb_h.flags = 0;
+	}
+	byte++;
+
+	/* Okay.  Now determine the cdb size based on the command code */
+	switch (*byte >> CMD_GROUP_CODE_SHIFT) {
+	case 0:
+		atio->cdb_len = 6;
+		break;
+	case 1:
+	case 2:
+		atio->cdb_len = 10;
+		break;
+	case 4:
+		atio->cdb_len = 16;
+		break;
+	case 5:
+		atio->cdb_len = 12;
+		break;
+	case 3:
+	default:
+		/* Only copy the opcode. */
+		atio->cdb_len = 1;
+		printf("Reserved or VU command code type encountered\n");
+		break;
+	}
+	
+	memcpy(atio->cdb_io.cdb_bytes, byte, atio->cdb_len);
+
+	atio->ccb_h.status |= CAM_CDB_RECVD;
+
+	if ((cmd->identify & MSG_IDENTIFY_DISCFLAG) == 0) {
+		/*
+		 * We weren't allowed to disconnect.
+		 * We're hanging on the bus until a
+		 * continue target I/O comes in response
+		 * to this accept tio.
+		 */
+#if 0
+		printf("Received Immediate Command %d:%d:%d - %p\n",
+		       initiator, target, lun, ahc->pending_device);
+#endif
+		ahc->pending_device = lstate;
+		ahc_freeze_ccb((union ccb *)atio);
+		atio->ccb_h.flags |= CAM_DIS_DISCONNECT;
+	}
+	xpt_done((union ccb*)atio);
+	return (0);
+}
+#endif
+
+static int
+ahc_createdmamem(bus_dma_tag_t tag, int size, int flags, bus_dmamap_t *mapp,
+    caddr_t *vaddr, bus_addr_t *baddr, bus_dma_segment_t *seg, int *nseg,
+    const char *myname, const char *what)
+{
+	int error, level = 0;
+
+	if ((error = bus_dmamem_alloc(tag, size, PAGE_SIZE, 0,
+				      seg, 1, nseg, BUS_DMA_NOWAIT)) != 0) {
+		printf("%s: failed to allocate DMA mem for %s, error = %d\n",
+			myname, what, error);
+		goto out;
+	}
+	level++;
+
+	if ((error = bus_dmamem_map(tag, seg, *nseg, size, vaddr,
+				    BUS_DMA_NOWAIT|BUS_DMA_COHERENT)) != 0) {
+		printf("%s: failed to map DMA mem for %s, error = %d\n",
+			myname, what, error);
+		goto out;
+	}
+	level++;
+
+	if ((error = bus_dmamap_create(tag, size, 1, size, 0,
+				       BUS_DMA_NOWAIT | flags, mapp)) != 0) {
+                printf("%s: failed to create DMA map for %s, error = %d\n",
+			myname, what, error);
+		goto out;
+        }
+	level++;
+
+
+	if ((error = bus_dmamap_load(tag, *mapp, *vaddr, size, NULL,
+				     BUS_DMA_NOWAIT)) != 0) {
+                printf("%s: failed to load DMA map for %s, error = %d\n",
+			myname, what, error);
+		goto out;
+        }
+
+	*baddr = (*mapp)->dm_segs[0].ds_addr;
+
+	return 0;
+out:
+	printf("ahc_createdmamem error (%d)\n", level);
+	switch (level) {
+	case 3:
+		bus_dmamap_destroy(tag, *mapp);
+		/* FALLTHROUGH */
+	case 2:
+		bus_dmamem_unmap(tag, *vaddr, size);
+		/* FALLTHROUGH */
+	case 1:
+		bus_dmamem_free(tag, seg, *nseg);
+		break;
+	default:
+		break;
+	}
+
+	return error;
+}
+
+static void
+ahc_freedmamem(bus_dma_tag_t tag, int size, bus_dmamap_t map, caddr_t vaddr,
+    bus_dma_segment_t *seg, int nseg)
+{
+
+	bus_dmamap_unload(tag, map);
+	bus_dmamap_destroy(tag, map);
+	bus_dmamem_unmap(tag, vaddr, size);
+	bus_dmamem_free(tag, seg, nseg);
+}