further pruning

12 files changed, 8 insertions, 1984 deletions

diff --git a/usr.bin/mg/def.h b/usr.bin/mg/def.h
index a54956cab83..5fc2cbedc03 100644
--- a/usr.bin/mg/def.h
+++ b/usr.bin/mg/def.h
@@ -304,9 +304,3 @@ extern	char	*keyname();
 extern	char	*adjustname();
 extern	VOID	kdelete();
 extern	VOID	lchange();
-/*
- * Standard I/O.
- */
-extern	char	*strcpy();
-extern	char	*strcat();
-extern	char	*malloc();
diff --git a/usr.bin/mg/dvidoc.sty b/usr.bin/mg/dvidoc.sty
deleted file mode 100644
index 9dbb9cb8937..00000000000
--- a/usr.bin/mg/dvidoc.sty
+++ /dev/null
@@ -1,181 +0,0 @@
-% dvidoc style file.  Fixes things up so your file uses only fixed width 
-% non-math characters, at least if you don't use math mode 
-%
-% The first section defines all the font change commands to use the
-% doc pseudo-font.  It is taken from John Pavel's dvidoc.sty, March 1987
-%
-% version from John Pavel's dvidoc.sty, March 1987
-\def\rm{\protect\pdoc}
-\def\it{\protect\pdoc}
-\def\bf{\protect\pdoc}
-\def\sl{\protect\pdoc}
-\def\sf{\protect\pdoc}
-\def\sc{\protect\pdoc}
-\def\tt{\protect\pdoc}
-\newfam\docfam
-\def\pdoc{\@getfont\pdoc\docfam\@xpt{doc}}
-% This gets all normal text, headings, etc.
-% Unfortunately it doesn't catch places where more explicit stuff
-% is done.  The following is brute force but effective.  Note that
-% we leave the symbol fonts alone, since otherwise we'll get TeX
-% errors complaining that it couldn't find symbol fonts
-% Possibly we should do this for all of the font types.  This caught
-% everything in sample.tex.
-\font\fivmi = doc
-\font\fivrm = doc
-\font\fivsy = cmsy10
-\font\sixmi = doc
-\font\sixrm = doc
-\font\sixsy = cmsy10
-\font\sevmi = doc
-\font\sevrm = doc
-\font\sevsy = cmsy10
-\font\egtmi = doc
-\font\egtrm = doc
-\font\egtsy = cmsy10
-\font\ninmi = doc
-\font\ninrm = doc
-\font\ninsy = cmsy10
-\font\tenmi = doc
-\font\tenrm = doc
-\font\elvmi = doc
-\font\elvrm = doc
-\font\elvsy = cmsy10
-\font\twlmi = doc
-\font\twlsy = cmsy10
-\font\frtnmi = doc
-\font\frtnrm = doc
-\font\frtnsy = cmsy10
-\font\svtnmi = doc
-\font\svtnrm = doc
-\font\svtnsy = cmsy10
-\font\twtymi = doc
-\font\twtyrm = doc
-\font\twtysy = cmsy10
-\rm
-%
-% These dimensional definitions are also taken from Langdon, though with
-% some changes, e.g. not ragged right/bottom and parind 3 instead of 5. 
-% horizontal dimensions had best be multiples of \em
-\hsize 78 em                  % 78 characters per line so fit any screen
-% \rightskip=0pt plus 4em       % ragged right
-% \spaceskip=1em                % forces ONE space between words
-% \frenchspacing        suppresses extra blanks after punctuation -don't
-\parindent=3em
-\def\enspace{\kern 1em} \def\enskip{\hskip 1em\relax}
-%
-% vertical skips may best be multiples of \baselineskip
-\baselineskip=12pt            % 6 lines per inch
-% \vsize                        % default give 58 lines -OK
-\voffset=\baselineskip        % so don't lose \headline
-\parskip=0pt
-\smallskipamount=0pt
-\medskipamount= \baselineskip
-\bigskipamount=2\baselineskip
-% \raggedbottom
-%
-% By default itemize is done with bullets, which we don't have. use hyphen 
-% now fix up various latexish stuff
-% 
-\def\labelitemi{ -}
-\def\labelitemii{ -}
-\def\labelitemiii{ -}
-\def\labelitemiv{ -}
-%
-% Fix up table of contents.  
-%
-% Dottedtocline has to be redefined because
-% the original used math mode for the leader.  Dots in math mode turn out
-% to be colons.
-%
-% We've also got problems with spacing.  The spacing for section number
-% and page number isn't enough.  Add 1em * level number in dottedtocline
-% for the section number.  Unfortunately, chapter and part are hardcoded in
-% the style files and don't use dottedtocline.  So we add 1em to 
-% numberline.  Note that section and below get both the numberline and
-% the dottedtocline adjustment.
-\def\@dottedtocline#1#2#3#4#5{\ifnum #1>\c@tocdepth \else
-  \vskip \z@ plus .2pt
- {\hangindent #2\relax \rightskip \@tocrmarg \parfillskip -\rightskip
-   \parindent #2\relax\@afterindenttrue
-  \interlinepenalty\@M
-  \leavevmode 
-  \@tempdima 1em
-  \multiply \@tempdima #1
-  \addtolength\@tempdima{#3}
-   #4\nobreak\leaders\hbox to 2em{\hss.\hss}\hfill \nobreak \hbox to\@pnumwidth{\hfil\rm #5}\par}\fi}
-\def\numberline#1{\addtolength\@tempdima{2em} \hbox to\@tempdima{#1\hfil}}
-% page number width and table of contents right margin
-\def\@pnumwidth{3em}
-\def\@tocrmarg {4em}
-%
-% dotfill also used math mode for the leaders.
-%
-\def\dotfill{\cleaders\hbox{\hss.\hss}\hfill\kern\z@}
-%
-% Can't really do superscripts, so do footnotes with [] 
-%
-\def\@makefnmark{\hbox{/\@thefnmark/}}
-\long\def\@makefntext#1{\parindent 1em\noindent 
-            \hbox to 3em{\hss\@thefnmark.}\ #1}
-\skip\footins 24pt plus 4pt minus 2pt
-\def\footnoterule{\kern-12\p@   
-\hbox to .4\columnwidth{\leaders\hbox{-}\hfill}} 
-%
-% \arrayrulewidth 1em \doublerulesep 1em 
-%
-% Some fairly obvious hacks.  No odd/even pages in doc files.  Can't do the
-% fancy TeX symbols.
-%
-\oddsidemargin 0pt \evensidemargin 0pt
-\def\TeX{TeX}
-\def\LaTeX{LaTeX}
-\def\SliTeX{SliTeX}
-\def\BibTeX{BibTeX}
-\def\copyright{(C)}
-%
-% special versions of stuff from xxx10.sty, since only one font size
-%
-\def\@normalsize{\@setsize\normalsize{12pt}\xpt\@xpt
-\abovedisplayskip 12pt
-\belowdisplayskip \abovedisplayskip
-\abovedisplayshortskip  \z@
-\belowdisplayshortskip \z@
-\let\@listi\@listI}   % Setting of \@listi added 9 Jun 87
-\let\small\@normalsize
-\let\footnotesize\@normalsize
-\normalsize
-\footnotesep 12pt
-\labelsep 10pt
-\def\@listI{\leftmargin\leftmargini \parsep 0pt%
-\topsep 12pt%
-\itemsep 12pt}
-\let\@listi\@listI
-\let\@listii\@listI
-\let\@listiii\@listI
-\let\@listiv\@listI
-\let\@listv\@listI
-\let\@listvi\@listI
-\@listI
-%
-% We had sort of random numbers of blank lines around section numbers.
-% Turns out they used various fractional spacing.  Rather than depend
-% upon the definition of startsection, just wrap something around it
-% that normalizes the arguments to 12pt.  Negative args have special
-% meanings.  Alas, this trick doesn't fix up chapter and part entries,
-% as they have hardcoded extra vertical space.  No way to do that
-% without special definitions for l@chapter, which would be different
-% for different styles.  We're gonna get extra lines.  Sorry.
-\let\@oldstartsec\@startsection
-\def\@startsection#1#2#3#4#5#6{
-  \@tempskipa #4\relax
-  \@tempskipb #5\relax
-  \ifdim \@tempskipa <\z@ \@tempskipa -12pt \else \@tempskipa 12pt \fi
-  \ifdim \@tempskipb >\z@ \@tempskipb 12pt \fi
-\@oldstartsec{#1}{#2}{#3}{\@tempskipa}{\@tempskipb}{#6}
-}
-%
-% Remaining unsolved problem: hrule and vrule are no-ops.  This is
-% visible mostly in the tabular stuff, where none of the lines show up,
-% though it's still basically usable.
-%
diff --git a/usr.bin/mg/extend.c b/usr.bin/mg/extend.c
index b3d4aa4a298..54f832fb7f1 100644
--- a/usr.bin/mg/extend.c
+++ b/usr.bin/mg/extend.c
@@ -18,7 +18,6 @@
 #endif
 #endif
 
-extern	char	*strncpy();
 extern	int rescan();
 
 /* insert a string, mainly for use from macros (created by selfinsert) */
diff --git a/usr.bin/mg/fileio.c b/usr.bin/mg/fileio.c
index 300ecce18b4..52358e8d154 100644
--- a/usr.bin/mg/fileio.c
+++ b/usr.bin/mg/fileio.c
@@ -4,7 +4,6 @@
 #include	"def.h"
 
 static	FILE	*ffp;
-extern	char	*getenv();
 char	*adjustname();
 
 #include <sys/types.h>
@@ -199,7 +198,6 @@ register char *fn;
 {
     register char *cp;
     static char fnb[NFILEN];
-    extern struct passwd *getpwnam();
     struct passwd *pwent;
 #ifdef	SYMBLINK
     struct stat statbuf;
@@ -322,7 +320,6 @@ char *suffix;
 {
 	register char	*file;
 	static char	home[NFILEN];
-	char		*getenv();
 
 	if ((file = getenv("HOME")) == NULL) goto notfound;
 	if (strlen(file)+7 >= NFILEN - 1) goto notfound;
diff --git a/usr.bin/mg/mg.tex b/usr.bin/mg/mg.tex
deleted file mode 100644
index 75159922c4d..00000000000
--- a/usr.bin/mg/mg.tex
+++ /dev/null
@@ -1,1345 +0,0 @@
-%\batchmode %be nice to fellow VAXers
-\hoffset=0in \voffset=0in %correct dvi2ln3 bug
-\documentstyle[11pt,titlepage,dvidoc]{report}
-%\pagestyle{headings} %not sure on this one yet
-%\parindent=0in
-\textwidth=5.5in
-%\oddsidemargin=0.25in
-
-% definitions for DEFINE environment
-\newlength{\lblwide}
-\newcommand{\resetmarg}{\settowidth{\leftmargin}{\makebox[\lblwide]{}\makebox[\labelsep]{}}}
-\newcommand{\resetlbl}{\setlength{\labelwidth}{\lblwide}} 
-\newenvironment{define}[1]{\begin{list}{}{\settowidth{\lblwide}{\bf #1}\resetmarg \resetlbl}}{\end{list}}
-
-% definitions for fn environment
-
-\newcommand{\fname}[3]{\hspace{1em}\\{\tt #1}\index{#1} {\it #2}\hfill{\tt #3}}
-\newcommand{\fmore}[3]{\\{\tt #1}\index{#1} {\it #2}\hfill{\tt #3}}
-\newcommand{\fbody}{\\[0.5em]}
-
-% definitions for making the index
-\newcommand{\indexentry}[2]{\item {\tt #1} \dotfill\  #2}
-
-
-\setcounter{secnumdepth}{5} %personal preference
-\setcounter{tocdepth}{5} %personal preference
-\author{Sandra J. Loosemore}
-\title{The MG Reference Manual \\ Release MG2A}
-\date{\vspace{1.5in}
-Copyright \copyright 1987, Sandra J. Loosemore \\[0.5em]
-\parbox{5 in}{This document, or sections of this document, may be freely
-redistributed provided that the copyright notice and the following disclaimer
-remain intact:  The author bears no responsibilities for errors in
-this document or the software it describes; and shall not be held liable
-for any indirect, incidental, or consequential damages.}}
-
-\makeindex %usually not
-
-\begin{document}
-\maketitle
-
-\tableofcontents
-
-\chapter{Introduction}
-
-MG is a small, fast, and portable Emacs-style text editor intended to
-be used by people who can't run a real Emacs for one reason or another
---- as their main editor on smaller machines with limited memory or
-file space, or as a ``quick-start'' editor on larger systems, useful
-for composing short mail messages and the like. 
-
-We've made MG compatible with GNU Emacs because that is the ``big'',
-full-featured editor that many of us use regularly and are most
-familiar with.  GNU Emacs is the creation of Richard M. Stallman, who
-was also the author of the original Emacs editor.  However, MG is not
-associated in any way with the GNU project, and the MG authors
-individually may or may not agree with the opinions expressed by
-Richard Stallman and the GNU project. 
-
-MG is largely public domain.  You can use, modify, and redistribute MG
-as you like.  A few modules, however, are copyrighted; specifically,
-the regular expression code, the VMS termcap routines, and the Amiga
-support code.  Look at the source code for the exact copyright
-restrictions. 
-
-There are several other editors in existence which call themselves
-MicroEmacs.  The original public domain version was written by Dave
-Conroy and circulated as version 1.6.  Derived from this, there is
-another PD version by Dave Conroy numbered v30; a significantly larger
-PD version by Daniel Lawrence which is now up to version 3.9; at least
-one proprietary implementation; an implementation for the Atari ST
-with an integrated command shell, by Prabhaker Mateti; and probably
-others that we don't know about.
-
-MG is derived from the v30 MicroEmacs, with key bindings, command
-names, and general functionality made more compatible with GNU Emacs.
-Like v30, MG is fairly small and quite robust.  We have generally
-resisted the temptation to overfeaturize.  Some features which are
-large and complex are flagged for conditional compilation.
-
-Many people have contributed their time to developing, improving, and
-porting MG.  Mike Meyer, Mic Kaczmarczik, and Bob Larson deserve 
-particular mention for their efforts.  
-
-Questions, suggestions, and offers of help should be addressed to:
-
-\begin{verbatim}
-        mg-developers@ucbvax.berkeley.edu   (ARPA)
-        ucbvax!mg-developers                (UUCP)
-\end{verbatim}
-
-\section{Implementations of MG}
-
-MG runs on many different kinds of hardware under many different 
-operating systems.  Currently, these include:
-
-\begin{itemize}
-
-\item 4.2 and 4.3 BSD Unix (including Ultrix-32)
-\item System V Unix
-\item VAX/VMS
-\item Primos
-\item OS9/68k
-\item Amiga
-\item Atari ST
-\item MS-DOS
-
-\end{itemize}
-
-This document describes release MG2A.  When we talk of different
-versions of MG in this manual, the term {\em version\/} is used to
-refer to the different support MG provides for the various machines
-and operating systems it runs under, not to different releases of MG
-itself.  For example, we might speak of how the VMS version of MG
-differs from the Unix version.
-
-As mentioned above, some MG commands may not be implemented in all
-versions; these are noted in the documentation.  Some versions of MG
-also support features (such as mouse handling) that are not described
-here.
-
-\section{A Note on Character Sets}
-
-MG uses the 128-character ASCII character set, and provides support for
-8-bit characters.  Whether the particular version of MG that you are running
-knows about extended character sets depends on whether your terminal and
-the host operating system know about them.  Moreover, since there is no
-standard 8-bit character set, the same character codes will probably
-give different glyphs on different systems.  Most versions of MG use
-the DEC multinational character set.
-
-\section{Notation and Conventions}
-
-In this manual, commands and other things that must be typed in 
-literally are indicated in a typewriter font, like {\tt next-line}.
-Placeholders such as command argument names use an italic font.
-
-The terms {\em command\/} and {\em function\/} are synonymous.  We often
-speak of a command being bound to a particular {\em key\/}, although you 
-may actually have to type more than one character to form a single key.
-Most commands are bound to keys with {\em control\/} and {\em meta\/} 
-modifiers.
-
-To type a control character, use the control key on your
-keyboard like a shift key:  hold down the control key while typing the
-character.  In this manual, we will indicate control characters like
-\verb"C-x" --- here, typing the character ``x'' while holding down
-the control key.
-
-Some keyboards also have a meta key that works like the control
-key.  (It may be labelled something else;  on the Atari ST, for example,
-the key marked  ``Alternate'' is the meta key.)  If your keyboard doesn't
-have a meta key, don't panic.  You can also use the escape key as a meta
-prefix; first type the escape, and {\em then\/} the character.  Meta
-characters will be indicated as \verb"M-x".
-
-Besides the meta prefix, two other characters are used as prefixes:
-\verb"C-x" and \verb"C-h".  A few keys have special notation:  {\tt SPC} is
-the space character, {\tt DEL} is the delete or rubout character, {\tt RET}
-is carriage return, and {\tt ESC} is the escape character.  {\tt NUL} is 
-the null character (ASCII 0), which is usually equivalent to either 
-\verb"C-SPC" or \verb"C-@".
-
-Uppercase and lowercase characters are generally equivalent in command
-keystrokes.
-
-When you run MG from a shell, command line arguments are interpreted as the
-names of files you want to {\em visit\/}, or edit.  Each file is 
-read into a {\em buffer\/} in memory.  No changes are actually made to 
-the file until you ask it to be written out to disk.
-
-Within MG, the large top part of the screen serves as a {\em window\/} into
-the buffer being edited.  Below this is the {\em mode line\/}, which 
-displays the name of the buffer.  Finally, at the very bottom of the screen,
-there is a one-line {\em minibuffer\/} which is used for displaying
-messages and answering questions.
-
-MG keeps track of two pointers into each window, the {\em point\/} and the
-{\em mark\/}.  The {\em cursor\/} appears at the point in the current
-window, and we often speak of moving the cursor rather than of moving the
-point.  The text between the point and the mark is referred to as the {\em
-region\/}.
-
-Some commands deal with {\em words\/} and {\em paragraphs\/}.
-Generally, whitespace and punctuation separate words.  Lines that are
-empty or that contain only spaces or tabs separate paragraphs without
-being part of a paragraph.  A non-empty line that starts with a space
-or tab also begins a new paragraph. 
-
-A number of commands are defined as {\em toggles\/}.  If no prefix argument
-is supplied, these commands toggle an action.  The action is turned on if a 
-negative or zero argument is supplied, and turned on if a positive argument
-is supplied.
-
-\section{Getting Started}
-
-This document is intended primarily as a reference manual.  If you
-have never used any Emacs-like text editor before, it is strongly
-suggested that you run the on-line tutorial supplied with the MG
-distribution, instead of reading this manual.
-
-Do not be put off by the large number of commands described in this
-manual!  It is possible to get by with only a handful of basic commands.
-Here are the ones that are probably used most frequently:
-
-\begin{define}{\hspace{1in}}
-\item[{\tt C-p}\hfill] Move the cursor to the previous line
-\item[{\tt C-n}\hfill] Move the cursor to the next line
-\item[{\tt C-b}\hfill] Move the cursor backwards
-\item[{\tt C-f}\hfill] Move the cursor forwards
-\item[{\tt C-v}\hfill] Scroll forwards one screenful
-\item[{\tt M-v}\hfill] Scroll backwards one screenful
-\item[{\tt M-<}\hfill] Go to the beginning of the buffer
-\item[{\tt M->}\hfill] Go to the end of the buffer
-\item[{\tt C-a}\hfill] Go to the beginning of the line
-\item[{\tt C-e}\hfill] Go to the end of the line
-\item[{\tt DEL}\hfill] Delete the previous character
-\item[{\tt C-k}\hfill] Kill (delete) to the end of line
-\item[{\tt C-y}\hfill] Reinsert killed text.
-\item[{\tt C-x C-c}\hfill] Exit MG
-\item[{\tt C-x C-s}\hfill] Save the current buffer
-\end{define}
-
-\chapter{Using Commands}
-
-\section{Command Arguments}
-
-Some commands require arguments.  For example, if you want to read a
-file into a buffer, you must type in the name of the file.  In the
-descriptions of commands in this manual, if arguments are required,
-they are listed following the command name.
-
-MG prompts for command arguments in the minibuffer.  Within the minibuffer,
-the following characters can be used for editing:
-
-\begin{define}{\hspace{1in}}
-\item[{\tt DEL, C-h}\hfill] Erase the last character. 
-\item[{\tt C-x, C-u}\hfill] Erase the entire input line. 
-\item[{\tt C-w}\hfill] Erase to the beginning of the previous word. 
-\item[{\tt C-q, $\backslash$}\hfill] Quote the next character typed. 
-\item[{\tt RET}\hfill] Signifies that you have completed typing in 
-the argument. 
-\item[{\tt C-g}\hfill] Abort the command in progress.
-\end{define}
-
-\section{Prefix Arguments}
-
-All commands accept an optional numeric prefix argument.  This is
-often interpreted as a repetition count.  For example, the function
-{\tt next-line}, if given a prefix argument, will move the cursor
-forward that many lines; without an argument, it will move the cursor
-forward one line.  A few commands behave differently if given a prefix
-argument than they do without one, and others ignore the prefix
-argument entirely. 
-
-\fname{digit-argument}{}{M-0, M-1, M-2, M-3, M-4, M-5, M-6, M-7, M-8, M-9}
-\fmore{negative-argument}{}{M--} 
-\fbody One way to specify a command argument is to use the escape key
-as a meta prefix, and then type one or more digits.  A dash may be
-used for a negative argument.
-
-\fname{universal-argument}{}{C-u}
-\fbody Another way to specify a command prefix is to type {\tt C-u}.
-Typing one {\tt C-u} is equivalent to a prefix argument of 4, typing
-two gives a value of 16, and so on.  In addition, you can type digits
-following {\tt C-u} to form a numeric prefix argument.
-
-\section{Aborting}
-
-\fname{keyboard-quit}{}{C-g}
-\fbody Typing {\tt C-g} cancels any command.  It is particularly useful
-for cancelling a command when MG is prompting for input in the minibuffer.
-
-\section{Extended Commands}
-
-\fname{execute-extended-command}{command}{M-x}
-\fbody Commands that are not bound to keys can be executed through 
-{\tt execute extended-command}.  If a prefix argument is supplied, it
-is passed to the command being executed.
-
-
-\chapter{Moving the Cursor}
-
-The commands described in this chapter move the cursor (sometimes
-called the point or dot) within the current window.  Commands which
-set the mark are included here as well.
-
-\fname{backward-char}{}{C-b}
-\fbody Moves the cursor backward (left) one character.  If the cursor
-is at the left margin, it will be moved to the end of the previous line.
-
-\fname{backward-paragraph}{}{M-[}
-\fbody Moves the cursor backwards to the beginning of the current
-paragraph, or to the beginning of the previous paragraph if the cursor
-is already at the beginning of a paragraph.
-
-\fname{backward-word}{}{M-b}
-\fbody Moves the cursor backwards to the beginning of the current word,
-or to the beginning of the previous word if the cursor is already at
-the beginning of a word.
-
-\fname{beginning-of-buffer}{}{M-<}
-\fbody Moves the cursor backwards to the beginning of the buffer.
-
-\fname{beginning-of-line}{}{C-a}
-\fbody Moves the cursor backwards to the beginning of the current
-line.  This command has no effect if the cursor is already at the beginning
-of the line.
-
-\fname{end-of-buffer}{}{M->}
-\fbody Moves the cursor forwards to the end of the buffer.
-
-\fname{end-of-line}{}{C-e}
-\fbody Moves the cursor forwards to the end of the current line.  This
-command has no effect if the cursor is already at the end of the line.
-
-\fname{exchange-point-and-mark}{}{C-x C-x}
-\fbody Set the mark at the current cursor position, and move the cursor
-to the old location of the mark.
-
-\fname{forward-char}{}{C-f}
-\fbody Moves the cursor forwards one character.  If the cursor is at the
-end of a line, it will be moved to the first character on the next line.
-
-\fname{forward-paragraph}{}{M-]}
-\fbody Moves the cursor forwards to the next paragraph delimiter.
-
-\fname{forward-word}{}{M-f}
-\fbody Moves the cursor forwards to the end of the current word, or to
-the end of the next word if the cursor is already at the end of a word.
-
-\fname{goto-line}{line-number}{}
-\fbody Moves the cursor to the beginning of line {\em line-number\/} in
-the buffer.
-
-\fname{next-line}{}{C-n}
-\fbody Moves the cursor down one line.  The cursor remains in the same
-column unless it would be past the end of the line, in which case it is
-moved to the end of the line.  At the end of the buffer, {\tt C-n} will
-create new lines.
-
-\fname{previous-line}{}{C-p}
-\fbody Moves the cursor up one line.    The cursor remains in the same
-column unless it would be past the end of the line, in which case it is
-moved to the end of the line.
-
-\fname{recenter}{}{C-l}
-\fbody Redraws the entire screen, scrolling the current window if necessary
-so that the cursor is near the center.  With a positive prefix argument 
-{\em n\/}, the window is scrolled so that the cursor is {\em n\/} lines
-from the top.  A negative prefix argument puts the cursor that many lines
-from the bottom of the window.
-
-\fname{redraw-display}{}{}
-\fbody Redraws the entire screen, but never scrolls.
-
-\fname{scroll-down}{}{M-v}
-\fbody Scrolls the display down (moving backward through the
-buffer).  Without 
-an argument, it scrolls slightly less than one windowful.  A prefix argument
-scrolls that many lines.
-
-\fname{scroll-one-line-down}{}{}
-\fmore{scroll-one-line-up}{}{}
-\fbody These functions are similar to {\tt scroll-down} and {\tt scroll-up}
-(respectively), but when invoked without an argument, cause the display 
-to scroll by one line only.  These functions are enabled by defining the
-compile-time option GOSMACS.
-
-\fname{scroll-other-window}{}{M-C-v}
-\fbody Scrolls the ``other'' window forward as for {\tt scroll-up}.
-
-\fname{scroll-up}{}{C-v}
-\fbody Scrolls the display up (moving forward through the buffer).  Without an
-an argument, it scrolls slightly less than one windowful.  A prefix argument
-scrolls that many lines.
-
-\fname{set-mark-command}{}{NUL}
-\fbody Set the mark at the current cursor position.
-
-\fname{what-cursor-position}{}{C-x =}
-\fbody Prints some information in the minibuffer about where the cursor is.
-
-
-\chapter{Text Insertion Commands}
-
-The usual way to insert text into a buffer is simply to type the
-characters.  The default binding for all of the printing characters
-({\tt self-insert-command}) causes them to be inserted literally at
-the cursor position. 
-
-\fname{insert}{string}{}
-\fbody Insert {\em string\/} into the current buffer at the cursor position.
-
-\fname{newline}{}{RET}
-\fbody Insert a line break into the current buffer at the cursor position,
-moving the cursor forward to the beginning of the new line.
-
-\fname{newline-and-indent}{}{C-j}
-\fbody Insert a line break into the current buffer at the cursor position,
-then add extra whitespace so that the cursor is aligned in the same
-column as the first non-whitespace character in the previous line.
-
-\fname{open-line}{}{C-o}
-\fbody Inserts a line break into the current buffer at the current position,
-but does not move the cursor forward.
-
-\fname{quoted-insert}{}{C-q} 
-\fbody This command acts as a prefix to
-cancel the normal interpretation of the next keystroke.  If {\tt C-q}
-is followed by one to three octal digits, it is interpreted as the
-code of the character to insert.  Otherwise a single key is read and
-the character typed is inserted into the buffer instead of interpreted
-as a command.  This is used for inserting literal control characters
-into a buffer. 
-
-\fname{self-insert-command}{}{}
-\fbody This is the default binding for keys representing printable
-characters.  The character is inserted into the buffer at the cursor
-position, and the cursor moved forward.
-
-\chapter{Killing, Deleting, and Moving Text}
-
-When text is deleted, it is erased completely.  Killing text, on the
-other hand, moves it into a temporary storage area called the kill
-buffer.  The saved text in the kill buffer is erased when another
-block of text is killed.  Until then, however, you can retrieve text
-from the kill buffer.  This can be used to move or copy blocks of
-text, as well as to restore accidentally killed text.
-
-\fname{backward-kill-word}{}{M-DEL}
-\fbody Kill the text backwards from the cursor position to the beginning
-of the current word.  Typing {\tt M-DEL} several times in succession 
-prepends each killed word to the kill buffer.
-
-\fname{copy-region-as-kill}{}{M-w}
-\fbody Copies the text in the region into the kill buffer, without removing
-it from the current buffer.
-
-\fname{delete-backward-char}{}{DEL}
-\fbody Deletes the character to the left of the cursor.
-
-\fname{delete-blank-lines}{}{C-x C-o}
-\fbody Deletes all blank lines after the current line, and if the current
-line is blank, deletes it and all blank lines preceeding it as well.
-
-\fname{delete-char}{}{C-d}
-\fbody Deletes the character underneath the cursor.
-
-\fname{delete-horizontal-space}{}{M-$\backslash$}
-\fbody Deletes all spaces and tabs on either side of the cursor.
-
-\fname{just-one-space}{}{M-SPC}
-\fbody This is like {\tt delete-horizontal-space}, except it leaves a single
-space at the cursor position.
-
-\fname{kill-line}{}{C-k}
-\fbody If no prefix argument is specified, this function kills text up
-to the next newline; or if the cursor is at the end of a line, the newline
-is killed.  A prefix argument specifies how many lines to kill.  Typing
-{\tt C-k} several times in succession appends each line to the kill buffer.
-
-\fname{kill-paragraph}{}{}
-\fbody This command kills the entire paragraph containing the cursor.
-If the cursor is positioned between paragraphs, the next paragraph is killed.
-
-\fname{kill-region}{}{C-w}
-\fbody The region (all text between point and mark) is killed.
-
-\fname{kill-word}{}{M-d}
-\fbody Text is killed forward from the cursor position to the next
-end of word.  If the cursor is at the end of the word, then the next
-word is killed.  Typing {\tt M-d} several times appends the killed
-text to the kill buffer.
-
-\fname{yank}{}{C-y}
-\fbody Text is copied from the kill buffer into the current buffer at
-the cursor position.  The cursor is moved to the end of the inserted
-text.
-
-\chapter{Searching and Replacing}
-
-\section{Searching}
-
-The ordinary search command in MG differs from that in many other editors
-in that it is incremental:  it begins searching as soon as you begin
-typing the search string, instead of waiting for you to type the entire
-string.
-
-All of the search commands described in this section are case-insensitive.
-
-
-\fname{isearch-backward}{pattern}{C-r}
-\fmore{isearch-forward}{pattern}{C-s}
-\fbody These commands perform an incremental search backward and 
-forward (respectively) for {\em pattern\/}.  MG will move the cursor 
-to the place in the buffer that matches as much of the pattern as you 
-have typed so far, as each character is entered.
-
-
-Within the incremental search, the following characters are interpreted
-specially:
-
-\begin{define}{\hspace{1in}}
-
-\item[{\tt DEL}\hfill] Erase the last character in the search string. 
-
-\item[{\tt ESC}\hfill] Stop searching; exit from incremental search
-mode, leaving the cursor where the search brought it. 
-
-\item[{\tt C-g}\hfill] If a match has been found, exits from
-incremental search but leaves the cursor in its original position.  If
-the search has failed, this will just erase the characters which have
-not been found from the end of the search pattern.  In this case, you
-must type \verb"C-g" again to abort the search. 
-
-\item[{\tt C-s}\hfill] Search forward for the next occurrence of the
-same pattern. 
-
-\item[{\tt C-r}\hfill] Search backward for the previous occurrence of
-the same pattern. 
-
-\item[{\tt C-q}\hfill] ``Quotes'' the next character typed, forcing it
-to be interpreted as a literal character in the search pattern.
-\end{define}
-
-In addition, normal commands such as \verb"C-a" that do not have special
-meanings within incremental search cause the search to be terminated, and
-then are executed in the ordinary way.
-
-\fname{search-again}{}{}
-\fmore{search-backward}{pattern}{M-r}
-\fmore{search-forward}{pattern}{M-s}
-\fbody These commands perform ordinary, non-incremental searches.
-{\tt Search-again} uses the same pattern and direction as the previous
-search.
-
-\section{Replacing}
-
-\fname{query-replace}{pattern replacement}{M-\%}
-\fbody The primary replace command in MG is an interactive query replace.
-MG searches forward for occurrences of {\em pattern\/}, and asks you what
-to do about each one.  The choices are:
-
-\begin{define}{\hspace{1in}}
-
-\item[{\tt SPC}\hfill] Replace this match with {\em replacement\/},
-and go on to the next. 
-
-\item[{\tt DEL}\hfill] Skip to the next match without replacing this one. 
-
-\item[{\tt .}\hfill] Replace this match, and then quit. 
-
-\item[{\tt !}\hfill] Replace all remaining occurrences without asking again. 
-
-\item[{\tt ESC}\hfill] Quit.
-\end{define}
-
-By default, {\tt query-replace} adjusts the case of lower-case letters
-in the replacement string to match that of the
-particular occurrence of the pattern; for example, replacing ``Foo''
-with ``bar'' results in ``Bar''.  Upper case letters in the replacement
-string are always left uppercase.   In addition, supplying a prefix argument
-will also tell {\tt query-replace} to leave the case of the replacement
-string as-is.
-
-Note that {\tt query-replace} always performs a case-insensitive search.
-
-
-
-\section{Regular Expressions}
-
-Regular expressions provide a means for specifying complex search
-patterns, instead of just a literal string.  The commands in this
-section are available only if MG is compiled with the REGEX option
-defined. 
-
-Regular expression syntax uses the following rules.  Most characters
-in a regular expression are considered to be {\em ordinary\/} characters,
-and will match themselves and nothing else.  The exceptions are the
-special characters listed below.
-
-\begin{define}{\hspace{1in}}
-
-\item[{\tt .}\hfill] Matches any single character except a newline.  
-
-\item[{\tt *}\hfill] A suffix operator that matches zero or more
-repetitions of the (smallest) preceding regular expression. 
-
-\item[{\tt +}\hfill] A suffix operator that matches one or more
-repetitions of the (smallest) preceding regular expression. 
-
-\item[{\tt ?}\hfill] A suffix operator that matches either zero or one
-occurence of the (smallest) preceding regular expression. 
-
-\item[{\tt [\ldots]}\hfill] Matches any one character listed in the
-character set between the square brackets.  See examples below. 
-
-\item[{\tt \^{ }}\hfill] Matches at the beginning of a line. 
-
-\item[{\tt \$}\hfill] Matches at the end of a line. 
-
-\item[{\tt $\backslash$}\hfill] Except for the situations listed
-below, acts as a prefix operator which causes the character following
-to be treated as an ordinary character. 
-
-\item[{\tt $\backslash$|}\hfill] An infix binary {\em or\/} operator.
-It applies to the two largest surrounding expressions. 
-
-\item[{\tt $\backslash$(\ldots$\backslash$)}\hfill] A grouping construct,
-usually used to specify a larger expression for postfix operators such
-as \verb"*" or to limit the scope of operands to \verb"\|". 
-
-\item[{\tt $\backslash${\em digit\/}}\hfill] Matches the same text
-matched by the {\em digit\/}th \verb"\(...\)" construct.  These are
-numbered from 1 to 9 in the order that the open-parentheses appear. 
-
-\item[{\tt $\backslash$`}\hfill] Matches at the beginning of the buffer. 
-
-\item[{\tt $\backslash$'}\hfill] Matches at the end of the buffer. 
-
-\item[{\tt $\backslash$b}\hfill] Matches at the beginning or end of a word. 
-
-\item[{\tt $\backslash$B}\hfill] Matches anyplace {\em except\/} at
-the beginning or end of a word. 
-
-\item[{\tt $\backslash$<}\hfill] Matches at the beginning of a word. 
-
-\item[{\tt $\backslash$>}\hfill] Matches at the end of a word. 
-
-\item[{\tt $\backslash$w}\hfill] Matches any word-constituent character. 
-
-\item[{\tt $\backslash$W}\hfill] Matches any character which is {\em
-not\/} a word-constituent. 
-
-\end{define}
-
-Some examples may help clarify the rules.
-
-\begin{define}{\hspace{1in}}
-
-\item[{\tt foo}\hfill] Matches the literal string {\tt foo}. 
-
-\item[{\tt ;.*}\hfill] Matches all strings which begin with a
-semicolon and continue to the end of a line. 
-
-\item[{\tt c[ad]+r}\hfill] Matches strings of the form {\tt car}, {\tt
-cdr}, {\tt caar}, {\tt cadr}, and so on. 
-
-\item[{\tt [a-z]}\hfill] Matches any lowercase letter. 
-
-\item[{\tt [\^{ }a-z]}\hfill] Matches any character {\em except\/}
-lowercase letters. 
-
-\item[{\tt [0-9+---]}\hfill] Matches a digit or sign. 
-
-\item[{\tt $\backslash$(foo$\backslash$|bar$\backslash$)}\hfill]
-Matches either the string {\tt foo} or the string {\tt bar}. 
-
-\end{define}
-
-\fname{count-matches}{pattern}{}
-\fmore{count-non-matches}{pattern}{}
-\fbody These commands count the number of lines which do or do not
-(respectively) match the specified pattern.
-
-\fname{delete-matching-lines}{pattern}{}
-\fmore{delete-non-matching-lines}{pattern}{}
-\fbody These commands delete all lines which do or do not (respectively)
-match the specified pattern.
-
-
-\fname{query-replace-regexp}{pattern replacement}{}
-\fbody This is the regular expression version of {\tt query-replace}.
-
-The {\em replacement\/} string may be a constant, or it can refer to
-all or part of the string matched by the {\em pattern\/}.  \verb"\&" in
-the replacement string expands into the entire text being replaced,
-while \verb"\"{\em n\/} (where {\em n\/} is a number) replaces the 
-{\em n\/}th parenthesized expression in {\em pattern\/}.
-
-\fname{re-search-again}{}{}
-\fmore{re-search-backward}{pattern}{}
-\fmore{re-search-forward}{pattern}{}
-\fbody These are the regular expression equivalents of the ordinary
-non-incremental search commands.
-
-\fname{set-case-fold-search}{}{}
-\fbody This command toggles an internal variable that controls whether
-the regular expression search and replace commands pay attention to
-case.  By default, regular expression searches are case-insensitive.
-Ordinary searches are always case-insensitive and are not affected by
-the setting of this variable.
-
-
-\chapter{Windows}
-
-MG initially has only one text window displayed.  However, you can have
-as many windows as will fit on the screen.  Each window has its own mode
-line and must display at least two lines of text.  (Note that a MG's
-``windows'' are distinct from the ``windows'' handled by screen managers
-such as the X Window System.)
-
-Multiple windows may be used to display different buffers.  You can also
-have the same buffer displayed in more than one window, which is useful
-if you want to see one part of a file at the same time as you are editing
-another part.
-
-Although many windows can be displayed at once, only one window is active 
-at any given time.  This is the window where the cursor appears.
-
-Some commands refer to the ``other'' window.  This is the window directly
-below the current window, or the top window if you are in the bottom window.
-
-\fname{delete-other-windows}{}{C-x 1}
-\fbody Makes the current window the only window.
-
-\fname{delete-window}{}{C-x 0}
-\fbody Deletes the current window, making the ``other'' window the
-current window.  This command doesn't do anything useful if there is only
-one window being displayed.
-
-\fname{enlarge-window}{}{C-\^{ }}
-\fbody Makes the current window larger.  Without a prefix argument, the
-window grows one line; otherwise, the prefix argument specifies how many
-lines to grow.
-
-\fname{other-window}{}{C-x o}
-\fbody Makes the ``other'' window the current window.
-
-\fname{previous-window}{}{}
-\fbody This is like {\tt other-window}, except that it cycles through
-the windows in reverse order.  This command is available only if MG was
-compiled with the GOSMACS option defined.
-
-\fname{shrink-window}{}{}
-\fbody Makes the current window smaller.  Without a prefix argument, the
-window loses one line; otherwise, the prefix argument specifies how many
-lines go away.
-
-\fname{split-window-vertically}{}{C-x 2}
-\fbody Split the current window into two windows, both using the same
-buffer.
-
-
-\chapter{Files and Buffers}
-
-Most buffers are used to contain a file being edited.  It is
-also possible to have buffers that are not associated with any file;
-MG uses these for purposes such as displaying help text, for example.
-However, since most commands for dealing with files also deal with
-buffers, we have grouped all of these commands together into one chapter.
-
-\section{Buffer Manipulation}
-
-\fname{insert-buffer}{buffer-name}{}
-\fbody Inserts the contents of the named buffer into the current buffer
-at the cursor location.  The cursor moves to the end of the inserted
-text.
-
-\fname{kill-buffer}{buffer-name}{C-x k}
-\fbody The named buffer and its contents are deleted.  If the buffer has
-been marked as modified, MG will ask you if you really want to delete it.
-Note that, contrary to its name, this command {\em does not\/} save the
-buffer contents in the kill buffer.
-
-If a buffer is being displayed in a window when it is deleted, MG will 
-find some other buffer to display in the same window.
-
-\fname{list-buffers}{}{C-x C-b}
-\fbody This command writes information about the buffers currently in
-use to a buffer named {\tt *Buffer List*}.  This buffer is then displayed
-in the ``other'' window; if there is only one window, this command will
-split the screen into two windows.
-
-\fname{not-modified}{}{M-\~{ }}
-\fbody This command makes MG think that the current buffer has not been
-modified, even if it really has been changed.  This affects the behavior
-of the {\tt kill-buffer} and the buffer-saving commands described below.
-
-MG indicates modified buffers with two stars at the left end of the mode
-line.
-
-\fname{switch-to-buffer}{buffer-name}{C-x b}
-\fbody The current window is mapped onto the named buffer.  If there
-isn't already a buffer with that name around, MG will create one.
-
-\fname{switch-to-buffer-other-window}{buffer-name}{C-x 4 b}
-\fbody This command works like {\tt switch-to-buffer}, except that the
-``other'' window is used.  If there is only one window, this command
-splits the screen into two windows and maps the named buffer onto one
-of them.
-
-\section{Reading and Writing Files}
-
-\fname{find-file}{file-name}{C-x f}
-\fmore{find-file-other-window}{file-name}{C-x 4 C-f}
-\fbody These commands are analagous to {\tt switch-to-buffer} and {\tt
-switch-to-buffer-other-window}, respectively.  The difference is that
-these commands look for a buffer associated with the named file.  If no
-matching buffer is found, MG will create a new buffer with a name
-derived from the filename, and attempt to read the file into the buffer.
-If the named file cannot be opened, the buffer remains empty.
-
-\fname{insert-file}{file-name}{C-x i}
-\fbody This command reads in the contents of the named file into the
-current buffer at the cursor position.  The cursor remains in the same
-place.
-
-\fname{save-buffer}{}{C-x C-s}
-\fbody If the current buffer has been modified, it is saved.  Buffers
-that are not associated with files cannot be written out with this
-command.
-
-\fname{save-buffers-kill-emacs}{}{C-x C-c}
-\fbody This command is used to leave MG and return control to the shell
-or other program that was used to start MG.  If there are modified buffers,
-MG will ask you if you want to save them before exiting.
-
-\fname{save-some-buffers}{}{C-x s}
-\fbody MG will ask you if you want to save modified buffers that are
-associated with files.
-
-\fname{write-file}{file-name}{C-x C-w}
-\fbody The current buffer is written out using the file name supplied.
-This is useful for saving buffers that are not associated with files, or
-for writing out a file with a different name than what was used to read
-it in.
-
-\section{Backup Files}
-
-MG provides a way to save a copy of the original version of files which 
-have been modified and then written out again.  The backup copy reflects
-the state of the file as it existed the first time it was read into MG.
-The name used for the backup file varies, depending on the operating
-system.
-
-This feature is disabled if MG is compiled with NO\_BACKUP defined.
-
-\fname{make-backup-files}{}{} 
-\fbody This command is a toggle which
-controls the state of an internal variable that determines whether MG
-creates backup files. 
-
-\section{Changing the Directory}
-
-The commands in this section are disabled by defining NO\_DIR.
-
-\fname{cd}{directory-name}{}
-\fbody This command changes MG's notion of the ``current'' directory
-or pathname.  This is used to supply defaults for functions that read 
-or write files.
-
-The syntax for {\em directory-name\/} is obviously specific to the
-particular operating system MG is running on.
-
-\fname{pwd}{}{}
-\fbody Display what MG thinks is the current directory.
-
-\chapter{Modes}
-
-Modes are used to locally alter the bindings of keys on a 
-buffer-by-buffer basis.  MG is normally in fundamental mode, and these
-are the bindings that are listed with the command descriptions in 
-this manual.  Modes define additional keymaps that are searched for
-bindings before the fundamental mode bindings are examined; see the
-section on key binding below for more details on how this works.
-
-\fname{set-default-mode}{mode-name}{}
-\fbody Normally, when MG visits a file, it puts the associated buffer
-into fundamental mode.  Using the {\tt set-default-mode} command, you
-can specify that MG should default to use some other mode on all subsequent
-buffers that are created.  This command is a toggle.  With no prefix
-argument, if the named mode is not already on the list of
-default modes, then it will be added to the list; otherwise, it is removed
-from the list.
-
-\section{No Tab Mode}
-
-In notab mode, tabs are expanded into spaces instead of inserted
-literally into the buffer.  Literal tab characters are displayed as
-\verb"^I" (much like other control characters).  These commands are
-available if MG is compiled with the symbol NOTAB defined.  (This mode
-is mainly for use on systems such as PRIMOS that do not treat tab as a
-series of spaces.)
-
-\fname{no-tab-mode}{}{}
-\fbody This command is a toggle to control whether notab mode is in effect.
-
-\fname{space-to-tabstop}{}{}
-\fbody Insert enough spaces to move the cursor to the next tab stop.  In
-notab mode, this function is bound to {\tt C-i}.
-
-
-\section{Overwrite Mode}
-
-Normally, when characters are inserted into the buffer, they are spliced
-into the existing text.  In overwrite mode, inserting a character causes
-the character already at the cursor position to be replaced.  This is
-useful for editing pictures, tables, and the like.
-
-\fname{overwrite-mode}{}{}
-\fbody This command is a toggle which controls whether overwrite mode is
-in effect.
-
-\section{Auto Fill}
-
-Fill mode causes newlines to be added automatically at word
-breaks when text is added at the end of a line, extending past the
-right margin.  Auto fill is useful for editing text and documentation
-files.
-
-\fname{auto-fill-mode}{}{}
-\fbody This command is a toggle which controls whether fill mode is
-in effect.
-
-\fname{insert-with-wrap}{}{}
-\fbody This command works like {\tt self-insert}, except that it checks
-to see if the cursor has passed the right margin.  If so, it fills
-the line by inserting a line break between words.  This command is bound to 
-{\tt SPC} in fill mode.
-
-\fname{fill-paragraph}{}{M-q}
-\fbody Fill the paragraph containing the cursor.
-
-\fname{set-fill-column}{}{C-x f}
-\fbody Without a prefix argument, this command sets the right margin
-at the current cursor column.  If a prefix argument is supplied, it is used
-instead as the line width.
-
-\section{Auto Indent}
-
-Indent mode binds {\tt RET} to {\tt newline-and-indent}, so
-that each new line is indented to the same level as the preceeding
-line.  This mode is useful for editing code. 
-
-\fname{auto-indent-mode}{}{}
-\fbody This command is a toggle which controls whether auto-indent mode
-is in effect.
-
-\section{Blink}
-
-Blink mode makes it easier to match parentheses, brackets, and other
-paired delimiters.  When the closing delimiter is typed, the cursor
-moves momentarily to the matching opening delimiter (if it is on the
-screen), or displays the line containing the matching delimiter on the
-echo line.  This is useful for editing Lisp or C code, or for
-preparing input files for text processors such as LaTeX that use
-paired delimiters. 
-
-\fname{blink-matching-paren}{}{}
-\fbody This command is a toggle which controls whether blink mode is
-in effect.
-
-\fname{blink-matching-paren-hack}{}{}
-\fbody This function behaves like {\tt self-insert}, except that it
-finds the matching delimiter as described above.  In blink mode, this
-function is bound to \verb")", which flashes the matching \verb"(".  This
-function also knows about the pairs \verb"{}", \verb"[]", and \verb"<>".
-All other characters match with themselves.
-
-\section{Dired Mode}
-
-``Dired'' is an abbreviation for ``directory editor'', and it provides a way
-to browse through the contents of a directory from with MG.  Dired puts
-a directory listing into a buffer; you can use normal editing commands to
-move around the buffer, and a special group of commands to manipulate
-the files.  For example, there are commands to delete and rename files,
-and to read a file into an MG buffer.
-
-Since dired mode rebinds many keys, a table may be helpful:
-
-\begin{verbatim}
-    C-d      dired-flag-file-deleted
-    SPC      next-line
-    c        dired-copy-file
-    d        dired-flag-file-deleted
-    e        dired-find-file
-    f        dired-find-file
-    n        next-line
-    o        dired-find-file-other-window
-    p        previous-line
-    r        dired-renamefile
-    u        dired-unflag
-    x        dired-do-deletions
-    DEL      dired-backup-unflag
-\end{verbatim}
-
-The commands in this section are disabled by defining NO\_DIRED.
-
-\fname{dired}{directory-name}{C-x d}
-\fbody Creates a dired buffer for the given directory name, and displays
-it in the current window.  The files
-in the directory are listed, usually along with information about the
-file such as its size and timestamp.  The exact format of the information
-is system-specific.
-
-\fname{dired-backup-unflag}{}{}
-\fbody This function removes the deletion flag from the file listed on
-the previous line of the dired buffer.
-
-\fname{dired-copy-file}{new-name}{}
-\fbody Copy the file listed on the current line of the dired buffer.
-
-\fname{dired-do-deletions}{}{}
-\fbody Deletes the files that have been flagged for deletion.
-
-\fname{dired-find-file}{}{}
-\fmore{dired-find-file-other-window}{}{}
-\fbody These function works like {\tt find-file} and 
-{\tt find-file-other-window}, except that the filename is taken 
-from the current line in the dired buffer.
-
-\fname{dired-flag-file-deleted}{}{}
-\fbody Flag the file listed on the current line for deletion.  This is
-indicated in the buffer by putting a ``D'' at the left margin.  No
-files are not actually deleted until the function {\tt dired-do-deletions}
-is executed.
-
-\fname{dired-other-window}{directory-name}{}
-\fbody This function works just like {\tt dired}, except that it puts the
-dired buffer in the ``other'' window.
-
-\fname{dired-rename-file}{new-name}{}
-\fbody Renames the file listed on the current line of the dired buffer.  
-Note that the dired buffer is not updated to reflect the change.
-
-\fname{dired-unflag}{}{}
-\fbody Remove the deletion flag for the file on the current line.
-
-\chapter{Miscellaneous}
-
-\section{Help}
-
-Most of the commands in this section write useful information to the
-{\tt *help*} buffer, which is then displayed in the ``other'' window.
-
-These commands can be disabled at compile-time by defining NO\_HELP.
-
-\fname{apropos}{topic}{C-h a}
-\fbody This command lists all functions whose names contain a string
-matching {\em topic\/} in the {\tt *help*} buffer.
-
-\fname{describe-bindings}{}{C-h b}
-\fbody Information about the key bindings in effect in the current buffer
-is listed in the {\tt *help*} buffer.
-
-\fname{describe-key-briefly}{key}{C-h c}
-\fbody Information about the binding of {\em key\/} is printed in the
-minibuffer.
-
-\fname{help-help}{option}{C-h C-h}
-\fbody This command lists all of the help options available and
-prompts for which one to run.  Currently, these include only {\tt a}
-to run {\tt apropos}, {\tt b} to run {\tt describe-bindings}, and {\tt c}
-to run {\tt describe-key-briefly}.
-
-
-\section{Keyboard Macros}
-
-A keyboard macro is a saved set of commands from the keyboard that can be
-reexecuted later on.  There can only be one keyboard macro defined at
-any one time.
-
-The commands in this section are available unless they have been disabled
-by defining NO\_MACRO.
-
-\fname{call-last-kbd-macro}{}{C-x e}
-\fbody Execute the saved keyboard macro.  A prefix argument can be used
-to specify a repetition count.
-
-\fname{end-kbd-macro}{}{C-x )}
-\fmore{start-kbd-macro}{}{C-x (}
-\fbody These functions are used to define a keyboard macro.  All keys
-entered after {\tt start-kbd-macro} is executed, up to a {\tt end-kbd-macro},
-are remembered as they are executed.  You can then reexecute the same
-sequence of operations using {\tt call-last-kbd-macro}.
-
-
-\section{Changing Case}
-
-MG provides a number of functions for changing the case of text.
-
-\fname{capitalize-word}{}{M-c}
-\fmore{downcase-region}{}{C-x C-l}
-\fmore{downcase-word}{}{M-l}
-\fmore{upcase-region}{}{C-x C-u}
-\fmore{upcase-word}{}{M-u}
-\fbody All of these commands do the obvious.
-
-
-\section{Odds and Ends}
-
-This section describes miscellaneous commands that don't fit into any
-particular category.
-
-\fname{emacs-version}{}{}
-\fbody Prints information about the version of MG you are running in
-the minibuffer.
-
-\fname{meta-key-mode}{}{}
-\fbody If the particular version of MG you are running supports a meta key,
-this function can be used to determine whether MG actually pays attention
-to it or not.  If no prefix argument is supplied, the internal variable
-that controls the use of the meta key is toggled; a positive value enables
-the meta key, while a negative value disables it.
-
-\fname{prefix-region}{}{}
-\fmore{set-prefix-string}{string}{}
-\fbody {\tt Prefix-region} is used to prefix each line of the region
-with a string.  This is useful for indenting quoted text, making block
-comments, and the like.  The function {\tt set-prefix-string} can be
-used to set the string used as the prefix.
-
-\fname{suspend-emacs}{}{C-z} 
-\fbody This command temporarily suspends
-MG so that you can run other programs, and later resume editing.  The
-exact behavior depends on which operating system you are running MG
-under.  Typically, MG will either spawn a new shell as a subprocess, or
-return you to the parent process.
-
-\fname{transpose-chars}{}{C-t}
-\fbody This command transposes the previous two characters.
-
-
-\chapter{Customization}
-
-MG provides a limited support for customization.  However, unlike ``real'' 
-Emacs, there is no extension language for interpretively defining new 
-functions.
-
-\section{Key Bindings}
-
-MG allows keys to be rebound locally or globally.  To understand the
-difference between the two, some discussion on how modes are implemented
-is necessary.
-
-An internal data structure called a keymap is used to look up the
-function that is bound to a particular key.  The keymap for
-fundamental mode contains all of the default bindings which are listed
-with the command descriptions in this manual.  Modes define additional
-keymaps that are searched for a binding before the fundamental mode
-keymap is examined.  Keymaps have the same name as the mode they are
-associated with.
-
-MG does not provide commands for defining new modes, but you can alter
-the keymaps for existing modes.
-
-\fname{define-key}{keymap-name key command}{}
-\fbody This command can be used to modify the keymap for the named mode.
-
-\fname{global-set-key}{key command}{}
-\fmore{global-unset-key}{key}{}
-\fbody These commands modify the keymap for fundamental mode.  Bindings
-established by {\tt global-set-key} will be inherited by all other modes, 
-as long as they do not establish local rebindings of the same key.
-
-\fname{local-set-key}{key command}{}
-\fmore{local-unset-key}{key}{}
-\fbody These commands modify the keymap currently in effect.
-
-
-\section{Startup Files}
-
-Although MG does not include a general-purpose extension language, it
-does provide a way to read and evaluate commands using a somewhat
-different syntax than that used for executing extended commands.  This
-is typically used in a startup file to modify key bindings.
-
-A startup file consists of one or more expressions.  Each expression must
-appear on a separate line in the file; there may not be more than one
-expression per line, nor may expressions span across line breaks.
-Whitespace (spaces and tabs) separate the tokens in an expression.  For
-historical reasons, parentheses are also considered to be whitespace in
-this context.  A semicolon acts as a comment character, causing the rest
-of the line to be discarded.
-
-An expression consists of a function name, an optional prefix argument
-(given as an integer constant), and arguments to be passed to the
-function.  If an argument includes literal whitespace or nonprintable
-characters (for example, as in a keystroke argument to one of the key
-binding functions described in the previous section), it must be
-supplied as a string constant enclosed in double quotes. 
-
-Within string constants, the following backslash escapes are available
-to specify nonprintable characters:
-
-\begin{define}{\hspace{1in}}
-
-\item[{\tt $\backslash$t, $\backslash$T}\hfill] Tab 
-\item[{\tt $\backslash$n, $\backslash$N}\hfill] Newline 
-\item[{\tt $\backslash$r, $\backslash$R}\hfill] Carriage return 
-\item[{\tt $\backslash$e, $\backslash$E}\hfill] Escape (Meta prefix) 
-\item[{\tt $\backslash$\^{ }}\hfill] Control prefix 
-
-\item[{\tt $\backslash${\em n\/}}\hfill] Specifies a character by its
-ASCII code, where {\em n\/} may consist of from one to three octal
-digits
-
-\item[{\tt $\backslash$f{\em n\/}, $\backslash$F{\em n\/}}\hfill]
-Specifies the keycode for the {\em n\/}th function key.  {\em N\/} may
-consist of one or two decimal digits. 
-
-\end{define}
-
-The following commands which deal with evaluation of expressions are
-disabled by defining the compile-time option NO\_STARTUP.  
-
-The Rutgers Sun version will attempt to read two different startup
-files, a general startup file and a terminal-specific startup file.
-The terminal-specific startup file is intended primarily to define the
-keypad.  The general startup file is .mg in your home directory.  If
-there is no such file, /usr/local/lib/mg/mg will be used.  The
-terminal-specific startup file is .mg-TYPE, where TYPE represents the
-name of the terminal type.  E.g if your terminal type is set to vt100,
-MG will read a file .mg-vt100.  If there is no such file, it will try
-/usr/local/lib/mg/mg-vt100.  Files should exist in /usr/local/lib/mg
-for the terminal types commonly in use at Rutgers.
-
-For other versions, see the implementation notes for your particular
-version of MG for information on how it handles startup files.
-
-
-\fname{eval-current-buffer}{}{}
-\fbody Evaluate the expressions in the current buffer.
-
-\fname{eval-expression}{expression}{}
-\fbody Evaluate the expression supplied.
-
-\fname{load}{file-name}{}
-\fbody Read in the specified file and evaluate its contents.
-
-\twocolumn[\Huge{\vspace{2em}{\bf Fundamental Mode Key Bindings}\vspace{1.5em}}]
-\addcontentsline{toc}{chapter}{Fundamental Mode Key Bindings}
-\begin{verbatim}
-NUL       set-mark-command
-C-a       beginning-of-line
-C-b       backward-char
-C-d       delete-char
-C-e       end-of-line
-C-f       forward-char
-C-g       keyboard-quit
-C-h       help
-TAB       self-insert-command
-C-j       newline-and-indent
-C-k       kill-line
-C-l       recenter
-RET       newline
-C-n       next-line
-C-o       open-line
-C-p       previous-line
-C-q       quoted-insert
-C-r       isearch-backward
-C-s       isearch-forward
-C-t       transpose-chars
-C-u       universal-argument
-C-v       scroll-up
-C-w       kill-region
-C-x       c-x prefix
-C-y       yank
-C-z       suspend-emacs
-ESC       meta prefix
-SPC .. ~  self-insert-command
-DEL       delete-backward-char
-
-C-h C-g   keyboard-quit
-C-h C-h   help-help
-C-h a     apropos
-C-h b     describe-bindings
-C-h c     describe-key-briefly
-
-C-x C-b   list-buffers
-C-x C-c   save-buffers-kill-emacs
-C-x C-f   find-file
-C-x C-g   keyboard-quit
-C-x C-l   downcase-region
-C-x C-o   delete-blank-lines
-C-x C-s   save-buffer
-C-x C-u   upcase-region
-C-x C-w   write-file
-C-x C-x   exchange-point-and-mark
-C-x (     start-kbd-macro
-C-x )     end-kbd-macro
-C-x 0     delete-window
-C-x 1     delete-other-windows
-C-x 2     split-window-vertically
-C-x 4     c-x 4 prefix
-C-x =     what-cursor-position
-C-x ^     enlarge-window
-C-x b     switch-to-buffer
-C-x d     dired
-C-x e     call-last-kbd-macro
-C-x f     set-fill-column
-C-x i     insert-file
-C-x k     kill-buffer
-C-x o     other-window
-C-x s     save-some-buffers
-C-x 4 C-f find-file-other-window
-C-x 4 C-g keyboard-quit
-C-x 4 b   switch-to-buffer-other-window
-C-x 4 f   find-file-other-window
-
-M-C-g     keyboard-quit
-M-C-v     scroll-other-window
-M-SPC     just-one-space
-M-%       query-replace
-M--       negative-argument
-M-0       digit-argument
-M-1       digit-argument
-M-2       digit-argument
-M-3       digit-argument
-M-4       digit-argument
-M-5       digit-argument
-M-6       digit-argument
-M-7       digit-argument
-M-8       digit-argument
-M-9       digit-argument
-M-<       beginning-of-buffer
-M->       end-of-buffer
-M-[       backward-paragraph
-M-\       delete-horizontal-space
-M-]       forward-paragraph
-M-b       backward-word
-M-c       capitalize-word
-M-d       kill-word
-M-f       forward-word
-M-l       downcase-word
-M-q       fill-paragraph
-M-r       search-backward
-M-s       search-forward
-M-u       upcase-word
-M-v       scroll-down
-M-w       copy-region-as-kill
-M-x       execute-extended-command
-M-~       not-modified
-M-DEL     backward-kill-word
-
-\end{verbatim}
-
-\begin{theindex}
-\addcontentsline{toc}{chapter}{Index}
-\input{mgidx.tex}
-\end{theindex}
-
-\end{document}
diff --git a/usr.bin/mg/mgidx.tex b/usr.bin/mg/mgidx.tex
deleted file mode 100644
index aa005a0cb59..00000000000
--- a/usr.bin/mg/mgidx.tex
+++ /dev/null
@@ -1,131 +0,0 @@
-\indexentry{apropos}{31}
-\indexentry{auto-fill-mode}{27}
-\indexentry{auto-indent-mode}{28}
-\indexentry{backward-char}{9}
-\indexentry{backward-kill-word}{14}
-\indexentry{backward-paragraph}{9}
-\indexentry{backward-word}{9}
-\indexentry{beginning-of-buffer}{9}
-\indexentry{beginning-of-line}{9}
-\indexentry{blink-matching-paren}{28}
-\indexentry{blink-matching-paren-hack}{28}
-\indexentry{call-last-kbd-macro}{32}
-\indexentry{capitalize-word}{32}
-\indexentry{cd}{25}
-\indexentry{copy-region-as-kill}{14}
-\indexentry{count-matches}{19}
-\indexentry{count-non-matches}{19}
-\indexentry{define-key}{34}
-\indexentry{delete-backward-char}{14}
-\indexentry{delete-blank-lines}{14}
-\indexentry{delete-char}{14}
-\indexentry{delete-horizontal-space}{15}
-\indexentry{delete-matching-lines}{19}
-\indexentry{delete-non-matching-lines}{19}
-\indexentry{delete-other-windows}{21}
-\indexentry{delete-window}{21}
-\indexentry{describe-bindings}{31}
-\indexentry{describe-key-briefly}{31}
-\indexentry{digit-argument}{8}
-\indexentry{dired}{29}
-\indexentry{dired-backup-unflag}{29}
-\indexentry{dired-copy-file}{29}
-\indexentry{dired-do-deletions}{29}
-\indexentry{dired-find-file}{29}
-\indexentry{dired-find-file-other-window}{29}
-\indexentry{dired-flag-file-deleted}{29}
-\indexentry{dired-other-window}{30}
-\indexentry{dired-rename-file}{30}
-\indexentry{dired-unflag}{30}
-\indexentry{downcase-region}{32}
-\indexentry{downcase-word}{32}
-\indexentry{emacs-version}{32}
-\indexentry{end-kbd-macro}{32}
-\indexentry{end-of-buffer}{9}
-\indexentry{end-of-line}{10}
-\indexentry{enlarge-window}{21}
-\indexentry{eval-current-buffer}{36}
-\indexentry{eval-expression}{36}
-\indexentry{exchange-point-and-mark}{10}
-\indexentry{execute-extended-command}{8}
-\indexentry{fill-paragraph}{27}
-\indexentry{find-file}{24}
-\indexentry{find-file-other-window}{24}
-\indexentry{forward-char}{10}
-\indexentry{forward-paragraph}{10}
-\indexentry{forward-word}{10}
-\indexentry{global-set-key}{34}
-\indexentry{global-unset-key}{34}
-\indexentry{goto-line}{10}
-\indexentry{help-help}{31}
-\indexentry{insert}{12}
-\indexentry{insert-buffer}{23}
-\indexentry{insert-file}{24}
-\indexentry{insert-with-wrap}{27}
-\indexentry{isearch-backward}{16}
-\indexentry{isearch-forward}{16}
-\indexentry{just-one-space}{15}
-\indexentry{keyboard-quit}{8}
-\indexentry{kill-buffer}{23}
-\indexentry{kill-line}{15}
-\indexentry{kill-paragraph}{15}
-\indexentry{kill-region}{15}
-\indexentry{kill-word}{15}
-\indexentry{list-buffers}{23}
-\indexentry{load}{36}
-\indexentry{local-set-key}{34}
-\indexentry{local-unset-key}{35}
-\indexentry{make-backup-files}{25}
-\indexentry{meta-key-mode}{32}
-\indexentry{negative-argument}{8}
-\indexentry{newline}{12}
-\indexentry{newline-and-indent}{12}
-\indexentry{next-line}{10}
-\indexentry{no-tab-mode}{26}
-\indexentry{not-modified}{24}
-\indexentry{open-line}{12}
-\indexentry{other-window}{21}
-\indexentry{overwrite-mode}{27}
-\indexentry{prefix-region}{33}
-\indexentry{previous-line}{10}
-\indexentry{previous-window}{22}
-\indexentry{pwd}{25}
-\indexentry{query-replace}{17}
-\indexentry{query-replace-regexp}{19}
-\indexentry{quoted-insert}{12}
-\indexentry{re-search-again}{20}
-\indexentry{re-search-backward}{20}
-\indexentry{re-search-forward}{20}
-\indexentry{recenter}{10}
-\indexentry{redraw-display}{11}
-\indexentry{save-buffer}{24}
-\indexentry{save-buffers-kill-emacs}{24}
-\indexentry{save-some-buffers}{25}
-\indexentry{scroll-down}{11}
-\indexentry{scroll-one-line-down}{11}
-\indexentry{scroll-one-line-up}{11}
-\indexentry{scroll-other-window}{11}
-\indexentry{scroll-up}{11}
-\indexentry{search-again}{17}
-\indexentry{search-backward}{17}
-\indexentry{search-forward}{17}
-\indexentry{self-insert-command}{13}
-\indexentry{set-case-fold-search}{20}
-\indexentry{set-default-mode}{26}
-\indexentry{set-fill-column}{27}
-\indexentry{set-mark-command}{11}
-\indexentry{set-prefix-string}{33}
-\indexentry{shrink-window}{22}
-\indexentry{space-to-tabstop}{26}
-\indexentry{split-window-vertically}{22}
-\indexentry{start-kbd-macro}{32}
-\indexentry{suspend-emacs}{33}
-\indexentry{switch-to-buffer}{24}
-\indexentry{switch-to-buffer-other-window}{24}
-\indexentry{transpose-chars}{33}
-\indexentry{universal-argument}{8}
-\indexentry{upcase-region}{32}
-\indexentry{upcase-word}{32}
-\indexentry{what-cursor-position}{11}
-\indexentry{write-file}{25}
-\indexentry{yank}{15}
diff --git a/usr.bin/mg/mgprog.doc b/usr.bin/mg/mgprog.doc
deleted file mode 100644
index 1fc9f8e2703..00000000000
--- a/usr.bin/mg/mgprog.doc
+++ /dev/null
@@ -1,295 +0,0 @@
-This documentation covers mg 2a.
-
-I do want feedback from other mg developers on what they think of my
-changes, documentation, and what needs to be done to make mg better.
-This document is not complete, it mainly covers the areas I have
-recently changed.
-
-Possible future changes:
-
-Rearange file contents along more rational lines.  Further split the
-monolithic def.h file.
-
-Changing the echo line stuff to use a minibuffer keymap.
-
-Making the kill buffer a linked list of lines.
-
-Variables.
-
-Allow for backspace, ^s, etc. to be changed in some reasonable manner.
-(Probably using variables or a simulation thereof.)  I do not think an
-input keymap is the correct solution, even if it is frequently used in
-Gnu emacs.  (Besides the extra overhead, keynames come out wrong.)
-
-Make long lines wrap like they do in GNU emacs.
-
-Fix known (and unknown :-) bugs.
-
-Have the keymaps and associated tables generated by a program.
-
-
-Known bugs/limitations:
-
-Binding a key in a named keymap may or may not change the binding of
-other keys pointing to the same keymap.	 (i.e. if ^H and ^_ are bound
-to help, rebinding ^Hb may not (or may) change ^_b.  This can be cured
-by rebinding ^_ to help.)
-
-Overwrite mode does not work in macros.	 (Characters are inserted
-rather than overwriting.)
-
-Dired mode has some problems:  Rename does not update the buffer.
-Doing a dired again will update the buffer (whether it needs it or
-not) and will lose any marks for deletion.  .. and . are not
-recognized as special cases.
-
-
-
-New implementation oddities:
-
-insert and define-key are new commands corresponding to the mocklisp
-functions in Gnu Emacs.	 (Mg does not have non-command functions.)
-(Mg's insert will only insert one string.)
-
-The display wrap code does not work at all like that of GNU emacs.
-
-
-
-Adding command functions to mg:
-
-Command functions take two integer aguments and return an integer.
-The first argument, f, is a set of flags.  (f&FFARG) is non-zero if a
-numeric arguement was passed to the function.  (There are bits
-indicating how the agument was specified, but they are not fully
-impleminted.)  (f&FFRAND) is non-zero if the function is being called
-by another function and that possibly slightly different action should
-be taken.  (No error checking, supress output, etc.)  The second
-argument, n, is the numeric agument passed or one if there was no
-numeric arugment.  The fuction should return TRUE if it executes
-correctly, FALSE if it could not, and ABORT if the user typed the
-keyboard quit character at a prompt.
-
-The function must be added to the functnames table in keymap.c.	 This
-table must be kept in assending ascii sequence.
-
-
-
-Key maps:
-
-Key maps are structures containing information on what action should
-be taken corresponding to an individual keypress.  That action could
-be an indication that this is a prefix key and the next kepress should
-be looked up in another keymap.
-
-	Example keymap:
-
-	static	struct	KEYMAPE(6+IMAPEXT)	cXmap = {
-		6,
-		6+IMAPEXT,
-		rescan,
-		{
-			{CCHR('B'),CCHR('G'),	cXcB,	(KEYMAP *)NULL},
-			{CCHR('L'),CCHR('X'),	cXcL,	(KEYMAP *)NULL},
-			{'(',	')',		cXlp,	(KEYMAP *)NULL},
-			{'0',	'4',		cX0,	(KEYMAP *)&cX4map},
-			{'=',	'=',		cXeq,	(KEYMAP *)NULL},
-			{'^',	's',		cXcar,	(KEYMAP *)NULL},
-		}
-	};
-
-(Note: this example is a simplified example of a real keymap in keymap.c.)
-
-Since C does not directly support structures containing undementioned
-arrays, the macro KEYMAPE is used to create a structure with an array
-of the proper size.  6 is the current size of the array, and IMAPEXT
-is the number of extra elements left for future groth (by rebinding
-keys) before the map must be reallocated.  rescan is the function to
-be executed if a specific entry for the key is not found.  (rescan is
-a special function that searches for something else to do -- first by
-trying lowercasing the last character in the keymap, then by trying
-the other modes in effect.)
-
-The array elements must be in order by the keys they define.  Each
-covers a range of characters.  Numeric values should not be used for
-characters, they make porting mg to some other systems harder.	The
-CCHR macro may be used to specify control characters, including DEL
-(CCHR('?')).  cXcB, cXcL, etc. are arrays of pointers to functions
-returning int.	One of these fuction pointers per element may be to
-the pseuto-function prefix.  cX4map is the keymap coresponding to the
-prefix function bound to '4' in this keymap.  Having several keys in
-an element bound to the default function is better than increasing the
-number of elements.
-
-
-
-Modes:
-
-Modes are named key maps that are scanned for key bindings before the
-global keymap is.  There are functions in modes.c to toggle modes on
-or off for individual buffers.  Note that the "major"/"minor" mode
-distiction is different than in Gnu Emacs.  Dired is currently the
-only major mode available, buffers are put into dired mode on creation
-by the dired code.  (The distiction in mg is the major mode replaces
-the default keymap instead of being an overlay.) Some modes (overwrite
-and no-tab) also trigger per-buffer flags that should be convered to
-per-buffer variables when we add variables.  Keymaps for the modes are
-kept in keymap.c with the other keymaps.
-
-
-
-System dependent files:
-
-Fileio.c:
-	Contains file i/o routines:
-		ffputbuf(BUFFER *):
-Write all lines of buffer to the file.	The last line of the buffer does
-NOT have the normally implied newline.	(One may be added if
-nessisary, but don't write out the last line if it is zero characters
-long.)
-
-		ffgetline(char *buf, int nbuf, int *nbytes):
-Read a line from the file up to the length specified by the second
-argument in to the buffer pointed to by the first.  If a newline is
-not found after reading nbuf characters, return FIOLONG and on the
-next call to ffgetline return the remaining portion (or nbuf more
-characters and return FIOLONG).	 If a newline is found, set *nbytes to
-the number of characters read and return FIOSUC.  If the end of file
-is descovered, set *nbytes and return FIOEOF.  (If the file ends in a
-newline, the call returning FIOEOF will set *nbytes to 0.)  If any
-other error occurs, return FIOERR.
-
-		char *adjustname(char *fname)
-Standardize filename.  On mono-case systems, lowercase the file name.
-If NO_DIR is not defined, make fully qualified.	 (not relitive to the
-current directory, which may change.)
-
-		fncmp(char *fna, char *fnb) 
-Return 0 if both arguments refer to the same file or buffer.  #define
-it to be strcmp on mono-case or case sensitive systems, use a non-case
-sensitive compareison otherwise.  (Borrow it from the osk fileio.c)
-Both arguments have been through adjustname already. 
-
-	routines needed for dired:
-
-		rename(char *fromname, char *toname)
-rename file.  BSD systems have this as a system call.  return -1 on
-error.
-
-		copy(char *fromname, char *toname)
-copy file.  return -1 on error.
-
-		unlinkdir(char *name)
-Delete directory.  return -1 on error.  (possibly including non-empty
-directory.)
-
-		BUFFER *dired_(char *name)
-Create dired buffer for named directory.  See example from osk or bsd.
-
-		d_makename(LINE *l, char *fname)
-Concatinate directory name associated with the current dired BUFFER
-with file name in line.  Return ABORT if no file name on line, FALSE
-if it is an ordinary file, or TRUE if there is a directory.  Name made
-should be the same as if it were run through adjustname. 
-
-
-Converting system & terminal dependent files from mg1b:
-
-All command functions will have to be rewritten to use the new two
-argument calling sequence.  (Some compilers will let you get away
-without doing this for testing purposes.  Problems, if any, will show
-up at run-time.)
-
-Key binding is completly different.  See extend.c if your code needs
-to do rebinding.
-
-I have attempted make mg less dependant on ascii character values.
-Keymap.c depends on ascii sorting order.  Cinfo.c depends on character
-values and contains a function to convert from a character value
-to a key name.  Several modules assume 3 octal digits are enough for
-any character value.
-
-Names of most compile time options have changed.  Whatever is most
-GNU-emacs like is now the default.
-
-sysdef.h:
-	The type KEY should not be defined.  The type KCHAR should be defined.
-	All posible key inputs must be positive in type KCHAR.	short is
-	recomended.
-
-spawn.c:
-	Update to the new function calling conventions.
-
-Makefile:
-	Needs complete rewrite.	 You can probably figure out the dependencies
-	from the bsd or osk one.  Compile time options have changed.
-
-Fileio.c:
-	Remove function ffputline.  Add function ffputbuf (described above).
-	Rewrite ffgetline to conform to the new way of doing things.  (see
-	above.)  These routines can probably be borrowed intact from the
-	OSK system dependant fileio.c for unix systems.
-	Replace adjustcase with adjustname.  Add fncmp either here or
-	as a #define in sysdef.h.  Add functions needed by dired.
-
-
-
-
-Compile time options:
-
-extentions not directly in gnu emacs
-
-BSMAP		input mapping exchanging ^H and DEL.
-		1 for defaulting to this, 0 for normal default.
-NOTAB		for systems that don't like tabs
-CVMVAS		arguments to ^V in screens not lines
-PREFIXREGION	prefix region
-PREVWIND	previous window
-GOSREC		Gossling style recenter
-STARTUPFILE	(unix & OSK) system-wide startup file
-XKEYS		(Termcap) Put kepad in alternate mode, use
-		terminal-dependent startup file.
-
-Features removeable to save space
-
-NO_HELP		help, descibe-bindings, describe-key-briefly, apropos
-NO_MACRO	keyboard macros.  If defined, NO_STARTUP must be also.
-NO_STARTUP	startup files, load, etc.
-NO_BACKUP	backup files when writing
-NO_DPROMPT	Delayed prompt on multi-key sequences
-NO_DIR		Dir change functions.  If defined, NO_DIRED must be also.
-NO_DIRED	Dired mode
-REGEX		Regular expressions.  Not default, since the code is rather
-		unportable and has the GNU copywrite on it.
-
-System dependant garbage (avoid where practical)
-
-VMS		VMS
-AMIGA		AMIGA
-
-
-Things that may be defined in system dependant code:
-
-XCHAR		XCHAR and XSHORT	(char and short for space savings)
-BDC2		more special characters for filenames
-BDC3		dito.
-METABIT		Bit of KCHAR set on meta keys
-OFFSET		macro to calculate offset of member from start of structure
-NBLOCK		line growth amount
-KBLOCK		kill buffer growth amount
-MALLOCROUND	macro to predict malloc allocations stratagy
-SYSINIT		system dependant initialization
-NO_VOID_TYPE	compiler dosen't have type void
-ZEROARRAY	zero length arrays are allowed
-BINDKEY		include bindkey routine for use by system & terminal
-		dependent code.
-
-Terminal dependant
-
-DO_METAKEY	meta key
-METABIT		Which bit in a KCHAR is used by the meta key (default 0x80)
-STANDOUT_GLITCH standout (may) take character position(s)
-GOSLING		optimize redisplay
-MEMMAP		memory mapped display
-MOVE_STANDOUT	cursor addressing may be done in standout mode
-FKEYS		function keys do not fit in type char.
-		Not for use where function keys send multiple characters.
diff --git a/usr.bin/mg/spawn.c b/usr.bin/mg/spawn.c
index 3d3f562b646..f907d944a57 100644
--- a/usr.bin/mg/spawn.c
+++ b/usr.bin/mg/spawn.c
@@ -11,8 +11,6 @@
 char	*shellp	= NULL;			/* Saved "SHELL" program.	*/
 char	*shname = NULL;			/* Saved shell name		*/
 
-extern	char	*getenv();
-
 /*
  * On System V, we no gots job control, so always run
  * a subshell using fork/exec. Bound to "C-C", and used
@@ -23,11 +21,10 @@ extern	char	*getenv();
  */
 spawncli(f, n)
 {
-	extern char	*strrchr();
 	register int	pid;
 	register int	wpid;
-	register int	(*oqsig)();
-	register int	(*oisig)();
+	register void	(*oqsig)();
+	register void	(*oisig)();
 	int		status;
 	int		errp = FALSE;
 
@@ -85,7 +82,6 @@ spawncli(f, n)
  */
 attachtoparent(f, n)
 {
-	extern char	*strrchr();
 	register int	pid;
 	register int	wpid;
 	register int	(*oqsig)();
diff --git a/usr.bin/mg/sysdef.h b/usr.bin/mg/sysdef.h
index 9b0ac63ee31..50639e63566 100644
--- a/usr.bin/mg/sysdef.h
+++ b/usr.bin/mg/sysdef.h
@@ -2,12 +2,15 @@
  *		System V system header file
  */
 #include <stdio.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <string.h>
 
 #define	KBLOCK	8192			/* Kill grow.			*/
 #define	GOOD	0			/* Good exit status.		*/
 #define	MAXPATH	256			/* Maximum length of path for chdir */
 
-typedef long	RSIZE;			/* Type for file/region sizes	*/
+typedef int	RSIZE;			/* Type for file/region sizes	*/
 typedef short	KCHAR;			/* Type for internal keystrokes	*/
 
 /*
@@ -23,12 +26,7 @@ typedef short	KCHAR;			/* Type for internal keystrokes	*/
 #define MALLOCROUND(m)	(m+=7,m&=~7)	/* round up to 8 byte boundry	*/
 
 #define	fncmp		strcmp		/* file name comparison		*/
-#define bcopy(s,d,n)	memcpy(d,s,n)	/* memory-to-memory copy	*/
-#define bzero(s,n)	memset(s,0,n)	/* clear memory */
-char *getenv();
 #define	gettermtype()	getenv("TERM")	/* determine terminal type	*/
-char *getcwd();
-#define getwd(cwd)	getcwd(cwd,NFILEN) /* get current working dir	*/
 
 struct fileinfo {
 	unsigned short fi_mode;
diff --git a/usr.bin/mg/tar.exclude b/usr.bin/mg/tar.exclude
deleted file mode 100644
index 019cfb531d5..00000000000
--- a/usr.bin/mg/tar.exclude
+++ /dev/null
@@ -1,7 +0,0 @@
-hold
-obj
-sys
-mg.tar
-*.o
-mg
-*~
diff --git a/usr.bin/mg/ttydef.h b/usr.bin/mg/ttydef.h
index 3700ea0f174..fbbec4ca70e 100644
--- a/usr.bin/mg/ttydef.h
+++ b/usr.bin/mg/ttydef.h
@@ -3,12 +3,12 @@
  *	enough for windowing systems.
  */
 
-#define GOSLING			/* Compile in fancy display.	*/
+#define GOSLING				/* Compile in fancy display.	*/
 /* #define	MEMMAP		*/	/* Not memory mapped video.	*/
 
 #define NROW	66			/* (maximum) Rows.		*/
 #define NCOL	132			/* (maximum) Columns.		*/
-/* #define	MOVE_STANDOUT		/* don't move in standout mode	*/
+/* #define	MOVE_STANDOUT */	/* don't move in standout mode	*/
 #define STANDOUT_GLITCH			/* possible standout glitch	*/
 #define TERMCAP				/* for possible use in ttyio.c	*/
 
diff --git a/usr.bin/mg/ttyio.c b/usr.bin/mg/ttyio.c
index 7cd8c7978b7..58f84eb4dfa 100644
--- a/usr.bin/mg/ttyio.c
+++ b/usr.bin/mg/ttyio.c
@@ -51,7 +51,6 @@ char kbdq;			/* char we've already read	*/
 ttopen()
 {
 	register char	*cp;
-	extern char	*getenv();
 
 	if (ttyactivep)
 		return;