Apache 1.3.4 merge

1 files changed, 677 insertions, 133 deletions

diff --git a/usr.sbin/httpd/conf/httpd.conf-dist-win b/usr.sbin/httpd/conf/httpd.conf-dist-win
index 7cf79956aa6..1ad64192832 100644
--- a/usr.sbin/httpd/conf/httpd.conf-dist-win
+++ b/usr.sbin/httpd/conf/httpd.conf-dist-win
@@ -1,26 +1,179 @@
-# This is the main server configuration file. See URL http://www.apache.org/
-# for instructions.
-
+#
+# Based upon the NCSA server configuration files originally by Rob McCool.
+#
+# This is the main Apache server configuration file.  It contains the
+# configuration directives that give the server its instructions.
+# See <URL:http://www.apache.org/docs/> for detailed information about
+# the directives.
+#
 # Do NOT simply read the instructions in here without understanding
-# what they do, if you are unsure consult the online docs. You have been
-# warned.  
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+# After this file is processed, the server will look for and process
+# @@ServerRoot@@/conf/srm.conf and then @@ServerRoot@@/conf/access.conf
+# unless you have overridden these with ResourceConfig and/or
+# AccessConfig directives here.
+#
+# The configuration directives are grouped into three basic sections:
+#  1. Directives that control the operation of the Apache server process as a
+#     whole (the 'global environment').
+#  2. Directives that define the parameters of the 'main' or 'default' server,
+#     which responds to requests that aren't handled by a virtual host.
+#     These directives also provide default values for the settings
+#     of all virtual hosts.
+#  3. Settings for virtual hosts, which allow Web requests to be sent to
+#     different IP addresses or hostnames and have them handled by the
+#     same Apache server process.
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path.  If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
+# with ServerRoot set to "/usr/local/apache" will be interpreted by the
+# server as "/usr/local/apache/logs/foo.log".
+#
+# NOTE: Where filenames are specified, you must use forward slashes
+# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
+# If a drive letter is omitted, the drive on which Apache.exe is located
+# will be used by default.  It is recommended that you always supply
+# an explicit drive letter in absolute paths, however, to avoid
+# confusion.
+#
 
-# Originally by Rob McCool
+### Section 1: Global Environment
+#
+# The directives in this section affect the overall operation of Apache,
+# such as the number of concurrent requests it can handle or where it
+# can find its configuration files.
+#
 
-# Note: Where filenames are specified, you must use forward slashes
-# instead of backslashes. e.g. "c:/apache" instead of "c:\apache". If
-# the drive letter is ommited, the drive where Apache.exe is located
-# will be assumed
+#
+# ServerType is either inetd, or standalone.  Inetd mode is only supported on
+# Unix platforms.
+#
+ServerType standalone
 
-# ServerType must be standalone.
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# Do NOT add a slash at the end of the directory path.
+#
+ServerRoot "@@ServerRoot@@"
 
-ServerType standalone
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+#
+PidFile logs/httpd.pid
+
+#
+# ScoreBoardFile: File used to store internal server process information.
+# Not all architectures require this.  But if yours does (you'll know because
+# this file will be  created when you run Apache) then you *must* ensure that
+# no two invocations of Apache share the same scoreboard file.
+#
+ScoreBoardFile logs/apache_status
+
+#
+# In the standard configuration, the server will process httpd.conf,
+# srm.conf, and access.conf in that order.  The latter two files are
+# now distributed empty, as it is recommended that all directives
+# be kept in a single file for simplicity.  The commented-out values
+# below are the built-in defaults.  You can have the server ignore
+# these files altogether by using "/dev/null" (for Unix) or
+# "nul" (for Win32) for the arguments to the directives.
+#
+#ResourceConfig conf/srm.conf
+#AccessConfig conf/access.conf
+
+#
+# ExtendedStatus controls whether Apache will generate "full" status
+# information (ExtendedStatus On) or just basic information (ExtendedStatus
+# Off) when the "server-status" handler is called. The default is Off.
+#
+#ExtendedStatus On
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We reccomend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 15
+
+#
+# Apache on Win32 always creates one child process to handle requests.  If it
+# dies, another child process is created automatically.  Within the child
+# process multiple threads handle incoming requests.  The next two
+# directives control the behaviour of the threads and processes.
+#
+
+#
+# MaxRequestsPerChild: the number of requests each child process is
+# allowed to process before the child dies.  The child will exit so
+# as to avoid problems after prolonged use when Apache (and maybe the
+# libraries it uses) leak memory or other resources.  On most systems, this
+# isn't really needed, but a few (such as Solaris) do have notable leaks
+# in the libraries.  For Win32, set this value to zero (unlimited)
+# unless advised otherwise.
+#
+MaxRequestsPerChild 0
+
+#
+# Number of concurrent threads (i.e., requests) the server will allow.
+# Set this value according to the responsiveness of the server (more
+# requests active at once means they're all handled more slowly) and
+# the amount of system resources you'll allow the server to consume.
+#
+ThreadsPerChild 50
+
+#
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, in addition to the default. See also the <VirtualHost>
+# directive.
+#
+#Listen 3000
+#Listen 12.34.56.78:80
+
+#
+# BindAddress: You can support virtual hosts with this option. This directive
+# is used to tell the server which IP address to listen to. It can either
+# contain "*", an IP address, or a fully qualified Internet domain name.
+# See also the <VirtualHost> and Listen directives.
+#
+#BindAddress *
 
 #
-# The following lists extra modules that can be uncommented to be loaded 
-# to enable extra functionality.  See the manual 
-# (http://www.apache.org/docs/mod/) for details on the functionality 
-# of each module.
+# Dynamic Shared Object (DSO) Support
+#
+# To be able to use the functionality of a module which was built as a DSO you
+# have to place corresponding `LoadModule' lines at this location so the
+# directives contained in it are actually available _before_ they are used.
+# Please read the file README.DSO in the Apache 1.3 distribution for more
+# details about the DSO mechanism and run `apache -l' for the list of already
+# built-in (statically linked and thus always available) modules in your Apache
+# binary.
+#
+# Note: The order in which modules are loaded is important.  Don't change
+# the order below without expert advice.
 #
 #LoadModule anon_auth_module modules/ApacheModuleAuthAnon.dll
 #LoadModule cern_meta_module modules/ApacheModuleCERNMeta.dll
@@ -33,176 +186,560 @@ ServerType standalone
 #LoadModule status_module modules/ApacheModuleStatus.dll
 #LoadModule usertrack_module modules/ApacheModuleUserTrack.dll
 
+### Section 2: 'Main' server configuration
+#
+# The directives in this section set up the values used by the 'main'
+# server, which responds to any requests that aren't handled by a
+# <VirtualHost> definition.  These values also provide defaults for
+# any <VirtualHost> containers you may define later in the file.
+#
+# All of these directives may appear inside <VirtualHost> containers,
+# in which case these default settings will be overridden for the
+# virtual host being defined.
+#
 
-# Port: The port the standalone listens to.
+#
+# If your ServerType directive (set earlier in the 'Global Environment'
+# section) is set to "inetd", the next few directives don't have any
+# effect since their settings are defined by the inetd configuration.
+# Skip ahead to the ServerAdmin directive.
+#
 
+#
+# Port: The port to which the standalone server listens.
+#
 Port 80
 
-# HostnameLookups: Log the names of clients or just their IP numbers
-#   e.g.   www.apache.org (on) or 204.62.129.132 (off)
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on.
+#
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed.  This address appears on some server-generated pages, such
+# as error documents.
+#
+ServerAdmin you@your.address
 
-HostnameLookups off
+#
+# ServerName allows you to set a host name which is sent back to clients for
+# your server if it's different than the one the program would get (i.e., use
+# "www" instead of the host's real name).
+#
+# Note: You cannot just invent host names and hope they work. The name you 
+# define here must be a valid DNS name for your host. If you don't understand
+# this, ask your network administrator.
+# If your host doesn't have a registered DNS name, enter its IP address here.
+# You will have to access it by its address (e.g., http://123.45.67.89/)
+# anyway, and this will make redirections work in a sensible way.
+#
+#ServerName new.host.name
 
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.  
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed.
+#
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+DocumentRoot "@@ServerRoot@@/htdocs"
 
-ServerAdmin you@your.address
+#
+# Each directory to which Apache has access, can be configured with respect
+# to which services and features are allowed and/or disabled in that
+# directory (and its subdirectories). 
+#
+# First, we configure the "default" to be a very restrictive set of 
+# permissions.  
+#
+<Directory />
+    Options FollowSymLinks
+    AllowOverride None
+</Directory>
 
-# ServerRoot: The directory the server's config, error, and log files
-# are kept in
+#
+# Note that from this point forward you must specifically allow
+# particular features to be enabled - so if something's not working as
+# you might expect, make sure that you have specifically enabled it
+# below.
+#
 
-ServerRoot "@@ServerRoot@@"
+#
+# This should be changed to whatever you set DocumentRoot to.
+#
+<Directory "@@ServerRoot@@/htdocs">
 
-# BindAddress: You can support virtual hosts with this option. This option
-# is used to tell the server which IP address to listen to. It can either
-# contain "*", an IP address, or a fully qualified Internet domain name.
-# See also the VirtualHost directive.
+#
+# This may also be "None", "All", or any combination of "Indexes",
+# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
+#
+# Note that "MultiViews" must be named *explicitly* --- "Options All"
+# doesn't give it to you.
+#
+    Options Indexes FollowSymLinks
 
-#BindAddress *
+#
+# This controls which options the .htaccess files in directories can
+# override. Can also be "All", or any combination of "Options", "FileInfo", 
+# "AuthConfig", and "Limit"
+#
+    AllowOverride None
+
+#
+# Controls who can get stuff from this server.
+#
+    Order allow,deny
+    Allow from all
+</Directory>
+
+#
+# UserDir: The name of the directory which is appended onto a user's home
+# directory if a ~user request is received.
+#
+# Under Win32, we do not currently try to determine the home directory of
+# a Windows login, so a format such as that below needs to be used.  See
+# the UserDir documentation for details.
+#
+UserDir "@@ServerRoot@@/users/"
+
+#
+# DirectoryIndex: Name of the file or files to use as a pre-written HTML
+# directory index.  Separate multiple entries with spaces.
+#
+DirectoryIndex index.html
+
+#
+# AccessFileName: The name of the file to look for in each directory
+# for access control information.
+#
+AccessFileName .htaccess
 
-# ErrorLog: The location of the error log file. If this does not start
-# with /, ServerRoot is prepended to it.
+#
+# The following lines prevent .htaccess files from being viewed by
+# Web clients.  Since .htaccess files often contain authorization
+# information, access is disallowed for security reasons.  Comment
+# these lines out if you want Web visitors to see the contents of
+# .htaccess files.  If you change the AccessFileName directive above,
+# be sure to make the corresponding changes here.
+#
+<Files .htaccess>
+    Order allow,deny
+    Deny from all
+</Files>
+
+#
+# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
+# document that was negotiated on the basis of content. This asks proxy
+# servers not to cache the document. Uncommenting the following line disables
+# this behavior, and proxies will be allowed to cache the documents.
+#
+#CacheNegotiatedDocs
+
+#
+# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
+# Apache needs to construct a self-referencing URL (a URL that refers back
+# to the server the response is coming from) it will use ServerName and
+# Port to form a "canonical" name.  With this setting off, Apache will
+# use the hostname:port that the client supplied, when possible.  This
+# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
+#
+UseCanonicalName On
 
+#
+# TypesConfig describes where the mime.types file (or equivalent) is
+# to be found.
+#
+TypesConfig conf/mime.types
+
+#
+# DefaultType is the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value.  If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+#
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type.  The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+# mod_mime_magic is not part of the default server (you have to add
+# it yourself with a LoadModule [see the DSO paragraph in the 'Global
+# Environment' section], or recompile the server and include mod_mime_magic
+# as part of the configuration), so it's enclosed in an <IfModule> container.
+# This means that the MIMEMagicFile directive will only be processed if the
+# module is part of the server.
+#
+<IfModule mod_mime_magic.c>
+    MIMEMagicFile conf/magic
+</IfModule>
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+#
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here.  If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
 ErrorLog logs/error.log
 
+#
 # LogLevel: Control the number of messages logged to the error.log.
 # Possible values include: debug, info, notice, warn, error, crit,
 # alert, emerg.
-
+#
 LogLevel warn
 
+#
 # The following directives define some format nicknames for use with
 # a CustomLog directive (see below).
-
+#
 LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
 LogFormat "%h %l %u %t \"%r\" %>s %b" common
 LogFormat "%{Referer}i -> %U" referer
 LogFormat "%{User-agent}i" agent
 
-# The location of the access logfile (Common Logfile Format).
-# If this does not start with /, ServerRoot is prepended to it.
-
+#
+# The location and format of the access logfile (Common Logfile Format).
+# If you do not define any access logfiles within a <VirtualHost>
+# container, they will be logged here.  Contrariwise, if you *do*
+# define per-<VirtualHost> access logfiles, transactions will be
+# logged therein and *not* in this file.
+#
 CustomLog logs/access.log common
 
-# If you would like to have an agent and referer logfile uncomment the
+#
+# If you would like to have agent and referer logfiles, uncomment the
 # following directives.
-
+#
 #CustomLog logs/referer.log referer
 #CustomLog logs/agent.log agent
 
-# If you prefer a single logfile with access, agent and referer information
+#
+# If you prefer a single logfile with access, agent, and referer information
 # (Combined Logfile Format) you can use the following directive.
-
+#
 #CustomLog logs/access.log combined
 
-# PidFile: The file the server should log its pid to
-PidFile logs/httpd.pid
+#
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (error documents, FTP directory listings,
+# mod_status and mod_info output etc., but not CGI generated documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of:  On | Off | EMail
+#
+ServerSignature On
 
-# ScoreBoardFile: File used to store internal server process information.
-# Not all architectures require this.  But if yours does (you'll know because
-# this file is created when you run Apache) then you *must* ensure that
-# no two invocations of Apache share the same scoreboard file.
-ScoreBoardFile logs/apache_status
+#
+# Aliases: Add here as many aliases as you need (with no limit). The format is 
+# Alias fakename realname
+#
+# Note that if you include a trailing / on fakename then the server will
+# require it to be present in the URL.  So "/icons" isn't aliased in this
+# example, only "/icons/"..
+#
+Alias /icons/ "@@ServerRoot@@/icons/"
 
-# ExtendedStatus controls whether Apache will generate "full" status
-# information (ExtendedStatus On) or just basic information (ExtendedStatus
-# Off) when the server-status Handler is called. The default is Off.
 #
-#ExtendedStatus On
+# ScriptAlias: This controls which directories contain server scripts.
+# ScriptAliases are essentially the same as Aliases, except that
+# documents in the realname directory are treated as applications and
+# run by the server when requested rather than as documents sent to the client.
+# The same rules about trailing "/" apply to ScriptAlias directives as to
+# Alias.
+#
+ScriptAlias /cgi-bin/ "@@ServerRoot@@/cgi-bin/"
 
-# ServerName allows you to set a host name which is sent back to clients for
-# your server if it's different than the one the program would get (i.e. use
-# "www" instead of the host's real name).
 #
-# Note: You cannot just invent host names and hope they work. The name you 
-# define here must be a valid DNS name for your host. If you don't understand
-# this, ask your network administrator.
-# If your host doesn't have a registered DNS name, enter its IP address here.
-# You will have to access it by its address (e.g., http://123.45.67.89)
-# anyway, and this will make redirections work in a sensible way.
+# "@@ServerRoot@@/cgi-bin" should be changed to whatever your ScriptAliased
+# CGI directory exists, if you have that configured.
+#
+<Directory "@@ServerRoot@@/cgi-bin">
+    AllowOverride None
+    Options None
+</Directory>
 
-#ServerName new.host.name
+#
+# Redirect allows you to tell clients about documents which used to exist in
+# your server's namespace, but do not anymore. This allows you to tell the
+# clients where to look for the relocated document.
+# Format: Redirect old-URI new-URL
+#
 
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (error documents, ftp directory listings,
-# mod_status and mod_info output etc., but not SSI generated documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-ServerSignature on
+#
+# Directives controlling the display of server-generated directory listings.
+#
 
-# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
-# Apache needs to construct a self-referencing URL (a url that refers back
-# to the server the response is coming from) it will use ServerName and
-# Port to form a "canonical" name.  With this setting off, Apache will
-# use the hostname:port that the client supplied, when possible.  This
-# also affects SERVER_NAME and SERVER_PORT in CGIs.
-UseCanonicalName on
+#
+# FancyIndexing is whether you want fancy directory indexing or standard
+#
+IndexOptions FancyIndexing
 
-# CacheNegotiatedDocs: By default, Apache sends Pragma: no-cache with each
-# document that was negotiated on the basis of content. This asks proxy
-# servers not to cache the document. Uncommenting the following line disables
-# this behavior, and proxies will be allowed to cache the documents.
+#
+# AddIcon* directives tell the server which icon to show for different
+# files or filename extensions.  These are only displayed for
+# FancyIndexed directories.
+#
+AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+AddIconByType (TXT,/icons/text.gif) text/*
+AddIconByType (IMG,/icons/image2.gif) image/*
+AddIconByType (SND,/icons/sound2.gif) audio/*
+AddIconByType (VID,/icons/movie.gif) video/*
+
+AddIcon /icons/binary.gif .bin .exe
+AddIcon /icons/binhex.gif .hqx
+AddIcon /icons/tar.gif .tar
+AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+AddIcon /icons/a.gif .ps .ai .eps
+AddIcon /icons/layout.gif .html .shtml .htm .pdf
+AddIcon /icons/text.gif .txt
+AddIcon /icons/c.gif .c
+AddIcon /icons/p.gif .pl .py
+AddIcon /icons/f.gif .for
+AddIcon /icons/dvi.gif .dvi
+AddIcon /icons/uuencoded.gif .uu
+AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+AddIcon /icons/tex.gif .tex
+AddIcon /icons/bomb.gif core
+
+AddIcon /icons/back.gif ..
+AddIcon /icons/hand.right.gif README
+AddIcon /icons/folder.gif ^^DIRECTORY^^
+AddIcon /icons/blank.gif ^^BLANKICON^^
 
-#CacheNegotiatedDocs
+#
+# DefaultIcon is which icon to show for files which do not have an icon
+# explicitly set.
+#
+DefaultIcon /icons/unknown.gif
 
-# Timeout: The number of seconds before receives and sends time out
+#
+# AddDescription allows you to place a short description after a file in
+# server-generated indexes.  These are only displayed for FancyIndexed
+# directories.
+# Format: AddDescription "description" filename
+#
+#AddDescription "GZIP compressed document" .gz
+#AddDescription "tar archive" .tar
+#AddDescription "GZIP compressed tar archive" .tgz
 
-Timeout 300
+#
+# ReadmeName is the name of the README file the server will look for by
+# default, and append to directory listings.
+#
+# HeaderName is the name of a file which should be prepended to
+# directory indexes. 
+#
+# The server will first look for name.html and include it if found.
+# If name.html doesn't exist, the server will then look for name.txt
+# and include it as plaintext if found.
+#
+ReadmeName README
+HeaderName HEADER
 
-# KeepAlive: Whether or not to allow persistent connections (more than
-# one request per connection). Set to "Off" to deactivate.
+#
+# IndexIgnore is a set of filenames which directory indexing should ignore
+# and not include in the listing.  Shell-style wildcarding is permitted.
+#
+IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
 
-KeepAlive On
+#
+# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
+# information on the fly. Note: Not all browsers support this.
+# Despite the name similarity, the following Add* directives have nothing
+# to do with the FancyIndexing customisation directives above.
+#
+AddEncoding x-compress Z
+AddEncoding x-gzip gz
 
-# MaxKeepAliveRequests: The maximum number of requests to allow
-# during a persistent connection. Set to 0 to allow an unlimited amount.
-# We reccomend you leave this number high, for maximum performance.
+#
+# AddLanguage allows you to specify the language of a document. You can
+# then use content negotiation to give a browser a file in a language
+# it can understand.  Note that the suffix does not have to be the same
+# as the language keyword --- those with documents in Polish (whose
+# net-standard language code is pl) may wish to use "AddLanguage pl .po" 
+# to avoid the ambiguity with the common suffix for perl scripts.
+#
+AddLanguage en .en
+AddLanguage fr .fr
+AddLanguage de .de
+AddLanguage da .da
+AddLanguage el .el
+AddLanguage it .it
 
-MaxKeepAliveRequests 100
+#
+# LanguagePriority allows you to give precedence to some languages
+# in case of a tie during content negotiation.
+# Just list the languages in decreasing order of preference.
+#
+LanguagePriority en fr de
 
-# KeepAliveTimeout: Number of seconds to wait for the next request
+#
+# AddType allows you to tweak mime.types without actually editing it, or to
+# make certain files to be certain types.
+#
+# For example, the PHP3 module (not part of the Apache distribution)
+# will typically use:
+#
+#AddType application/x-httpd-php3 .phtml
+#AddType application/x-httpd-php3-source .phps
 
-KeepAliveTimeout 15
+#
+# AddHandler allows you to map certain file extensions to "handlers",
+# actions unrelated to filetype. These can be either built into the server
+# or added with the Action command (see below)
+#
+# If you want to use server side includes, or CGI outside
+# ScriptAliased directories, uncomment the following lines.
+#
+# To use CGI scripts:
+#
+#AddHandler cgi-script .cgi
 
-# Apache always creates one child process to handle requests. If it
-# dies another child process is created automatically. Within the
-# child process multiple threads handle incoming requests. The next two
-# directives determine the behaviour of the threads and processes.
+#
+# To use server-parsed HTML files
+#
+#AddType text/html .shtml
+#AddHandler server-parsed .shtml
 
-# Don't force a server to exit after it has served some number of requests.
-# If you do want server's to exit after they have run for a long time (to
-# help the system clean up after the process), please set this to a pretty
-# large number - like 10,000. What this will do, is, each child server will
-# exit after serving 10,000 requests, and another server will take its place.
+#
+# Uncomment the following line to enable Apache's send-asis HTTP file
+# feature
+#
+#AddHandler send-as-is asis
 
-MaxRequestsPerChild 0
+#
+# If you wish to use server-parsed imagemap files, use
+#
+#AddHandler imap-file map
 
-# Number of concurrent threads at a time (set the value to more or less
-# depending on the responsiveness you want and the resources you wish
-# this server to consume).
+#
+# To enable type maps, you might want to use
+#
+#AddHandler type-map var
 
-ThreadsPerChild 50
+#
+# Action lets you define media types that will execute a script whenever
+# a matching file is called. This eliminates the need for repeated URL
+# pathnames for oft-used CGI file processors.
+# Format: Action media/type /cgi-script/location
+# Format: Action handler-name /cgi-script/location
+#
 
+#
+# MetaDir: specifies the name of the directory in which Apache can find
+# meta information files. These files contain additional HTTP headers
+# to include when sending the document
+#
+#MetaDir .web
+
+#
+# MetaSuffix: specifies the file name suffix for the file containing the
+# meta information.
+#
+#MetaSuffix .meta
 
+#
+# Customizable error response (Apache style)
+#  these come in three flavors
+#
+#    1) plain text
+#ErrorDocument 500 "The server made a boo boo.
+#  n.b.  the (") marks it as text, it does not get output
+#
+#    2) local redirects
+#ErrorDocument 404 /missing.html
+#  to redirect to local URL /missing.html
+#ErrorDocument 404 /cgi-bin/missing_handler.pl
+#  N.B.: You can redirect to a script or a document using server-side-includes.
+#
+#    3) external redirects
+#ErrorDocument 402 http://some.other_server.com/subscription_info.html
+#  N.B.: Many of the environment variables associated with the original
+#  request will *not* be available to such a script.
+
+#
+# The following directives disable keepalives and HTTP header flushes.
+# The first directive disables it for Netscape 2.x and browsers which
+# spoof it. There are known problems with these.
+# The second directive is for Microsoft Internet Explorer 4.0b2
+# which has a broken HTTP/1.1 implementation and does not properly
+# support keepalive when it is used on 301 or 302 (redirect) responses.
+#
+BrowserMatch "Mozilla/2" nokeepalive
+BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
+
+#
+# The following directive disables HTTP/1.1 responses to browsers which
+# are in violation of the HTTP/1.0 spec by not being able to grok a
+# basic 1.1 response.
+#
+BrowserMatch "RealPlayer 4\.0" force-response-1.0
+BrowserMatch "Java/1\.0" force-response-1.0
+BrowserMatch "JDK/1\.0" force-response-1.0
+
+#
+# Allow server status reports, with the URL of http://servername/server-status
+# Change the ".your_domain.com" to match your domain to enable.
+#
+#<Location /server-status>
+#    SetHandler server-status
+#    Order deny,allow
+#    Deny from all
+#    Allow from .your_domain.com
+#</Location>
+
+#
+# Allow remote server configuration reports, with the URL of
+#  http://servername/server-info (requires that mod_info.c be loaded).
+# Change the ".your_domain.com" to match your domain to enable.
+#
+#<Location /server-info>
+#    SetHandler server-info
+#    Order deny,allow
+#    Deny from all
+#    Allow from .your_domain.com
+#</Location>
+
+#
+# There have been reports of people trying to abuse an old bug from pre-1.1
+# days.  This bug involved a CGI script distributed as a part of Apache.
+# By uncommenting these lines you can redirect these attacks to a logging 
+# script on phf.apache.org.  Or, you can record them yourself, using the script
+# support/phf_abuse_log.cgi.
+#
+#<Location /cgi-bin/phf*>
+#    Deny from all
+#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
+#</Location>
+
+#
 # Proxy Server directives. Uncomment the following line to
 # enable the proxy server:
-
+#
 #ProxyRequests On
 
+#
 # Enable/disable the handling of HTTP/1.1 "Via:" headers.
 # ("Full" adds the server version; "Block" removes all outgoing Via: headers)
 # Set to one of: Off | On | Full | Block
-#ProxyVia on
+#
+#ProxyVia On
 
+#
 # To enable the cache as well, edit and uncomment the following lines:
 # (no cacheing without CacheRoot)
-
+#
 #CacheRoot "@@ServerRoot@@/proxy"
-
 #CacheSize 5
 #CacheGcInterval 4
 #CacheMaxExpire 24
@@ -210,26 +747,33 @@ ThreadsPerChild 50
 #CacheDefaultExpire 1
 #NoCache a_domain.com another_domain.edu joes.garage_sale.com
 
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, in addition to the default. See also the VirtualHost command
+### Section 3: Virtual Hosts
+#
+# VirtualHost: If you want to maintain multiple domains/hostnames on your
+# machine you can setup VirtualHost containers for them.
+# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
+# for further details before you try to setup virtual hosts.
+# You may use the command line option '-S' to verify your virtual host
+# configuration.
 
-#Listen 3000
-#Listen 12.34.56.78:80
+#
+# If you want to use name-based virtual hosts you need to define at
+# least one IP address (and port number) for them.
+#
+#NameVirtualHost 12.34.56.78:80
+#NameVirtualHost 12.34.56.78
 
-# VirtualHost: Allows the daemon to respond to requests for more than one
-# server address, if your server machine is configured to accept IP packets
-# for multiple addresses. This can be accomplished with the ifconfig 
-# alias flag, or through kernel patches like VIF.
-
-# Any httpd.conf or srm.conf directive may go into a VirtualHost command.
-# See also the BindAddress entry.
- 
-#<VirtualHost host.some_domain.com>
-#ServerAdmin webmaster@host.some_domain.com
-#DocumentRoot /www/docs/host.some_domain.com
-#ServerName host.some_domain.com
-#ErrorLog logs/host.some_domain.com-error.log
-#TransferLog logs/host.some_domain.com-access.log
+#
+# VirtualHost example:
+# Almost any Apache directive may go into a VirtualHost container.
+#
+#<VirtualHost ip.address.of.host.some_domain.com>
+#    ServerAdmin webmaster@host.some_domain.com
+#    DocumentRoot /www/docs/host.some_domain.com
+#    ServerName host.some_domain.com
+#    ErrorLog logs/host.some_domain.com-error_log
+#    CustomLog logs/host.some_domain.com-access_log common
 #</VirtualHost>
 
-
+#<VirtualHost _default_:*>
+#</VirtualHost>