initial import of NetBSD tree

1 files changed, 2646 insertions, 0 deletions

diff --git a/usr.sbin/sendmail/RELEASE_NOTES b/usr.sbin/sendmail/RELEASE_NOTES
new file mode 100644
index 00000000000..98f746193a3
--- /dev/null
+++ b/usr.sbin/sendmail/RELEASE_NOTES
@@ -0,0 +1,2646 @@
+			SENDMAIL RELEASE NOTES
+	     @(#)RELEASE_NOTES	8.6.12.1 (Berkeley) 3/28/95
+
+This listing shows the version of the sendmail binary, the version
+of the sendmail configuration files, the date of release, and a
+summary of the changes in that release.
+
+8.6.12/8.6.12	95/03/28
+	Fix to IDENT code (it was getting the size of the reply buffer
+		too small, so nothing was ever accepted).  Fix from several
+		people, including Allan Johannesen, Shane Castle of the
+		Boulder County Information Services, and Jeff Smith of
+		Warwick University (all arrived within a few hours of
+		each other!).
+	Fix a problem that could cause large jobs to run out of
+		file descriptors on systems that use vfork() rather
+		than fork().
+
+8.6.11/8.6.11	95/03/08
+	The ``possible attack'' message would be logged more often
+		than necessary if you are using Pine as a user agent.
+	The wrong host would be reported in the ``possible attack''
+		message when attempted from IDENT.
+	In some cases the syslog buffer could be overflowed when
+		reporting the ``possible attack'' message.  This can
+		cause denial of service attacks.  Truncate the message
+		to 80 characters to prevent this problem.
+	When reading the IDENT response a loop is needed around the
+		read from the network to ensure that you don't get
+		partial lines.
+	Password entries without any shell listed (that is, a null
+		shell) wouldn't match as "ok".  Problem noted by
+		Rob McMahon.
+	When running BIND 4.9.x a problem could occur because the
+		_res.options field is initialized differently than it
+		was historically -- this requires that sendmail call
+		res_init before it tweaks any bits.
+	Fix an incompatibility in openxscript() between the file open mode
+		and the stdio mode passed to fdopen.  This caused UnixWare
+		2.0 to have conniptions.  Fix from Martin Sohnius of
+		Novell Labs Europe.
+	Fix problem with static linking of local getopt routine when
+		using GNU's ld command.  Fix from John Kennedy of
+		Cal State Chico.
+	It was possible to turn off privacy flags.  Problem noted by
+		*Hobbit*.
+	Be more paranoid about writing files.  Suggestions by *Hobbit*
+		and Liudvikas Bukys.
+	MAKEMAP: fixes for 64 bit machines (DEC Alphas in particular)
+		from Spider Boardman.
+	CONFIG: No changes (version number only, to keep it in sync
+		with the binaries).
+
+8.6.10/8.6.10	95/02/10
+	SECURITY: Diagnose bogus values to some command line flags that
+		could allow trash to get into headers and qf files.
+	Validate the name of the user returned by the IDENT protocol.
+		Some systems that really dislike IDENT send intentionally
+		bogus information.  Problem pointed out by Michael Bushnell
+		of the Free Software Foundation.  Has some security
+		implications.
+	Fix a problem causing error messages about DNS problems when
+		the host name contained a percent sign to act oddly
+		because it was passed as a printf-style format string.
+		In some cases this could cause core dumps.
+	Avoid possible buffer overrun in returntosender() if error
+		message is quite ling.  From Fletcher Mattox of the
+		University of Texas.
+	Fix a problem that would silently drop "too many hops" error
+		messages if and only if you were sending to an alias.
+		From Jon Giltner of the University of Colorado and
+		Dan Harton of Oak Ridge National Laboratory.
+	Fix a bug that caused core dumps on some systems if -d11.2 was
+		set and e->e_message was null.  Fix from Bruce Nagel of
+		Data General.
+	Fix problem that can still cause df files to be left around
+		after "hop count exceeded" messages.  Fix from Andrew
+		Chang and Shau-Ping Lo of SunSoft.
+	Fix a problem that can cause buffer overflows on very long
+		user names (as might occur if you piped to a program
+		with a lot of arguments).
+	Avoid returning an error and re-queueing if the host signature
+		is null; this can occur on addresses like ``user@.''.
+		Problem noted by Wesley Craig and the University of
+		Michigan.
+	Avoid possible calls to malloc(0) if MCI caching is turned
+		off.  Bug fix from Pierre David of the Laboratoire
+		Parallelisme, Reseaux, Systemes et Modelisation (PRiSM),
+		Universite de Versailles - St Quentin, and Jacky
+		Thibault.
+	Make a local copy of the line being sent via senttolist() -- in
+		some cases, buffers could get trashed by map lookups
+		causing it to do unexpected things.  This also simplifies
+		some of the map code.
+	CONFIG: No changes (version number only, to keep it in sync
+		with the binaries).
+
+8.6.9/8.6.9	94/04/19
+	Do all mail delivery completely disconnected from any terminal.
+		This provides consistency with daemon delivery and
+		may have some security implications.
+	Make sure that malloc doesn't get called with zero size,
+		since that fails on some systems.  Reported by Ed
+		Hill of the University of Iowa.
+	Fix multi-line values for $e (SMTP greeting message).  Reported
+		by Mike O'Connor of Ford Motor Company.
+	Avoid syserr if no NIS domain name is defined, but the map it
+		is trying to open is optional.  From Win Bent of USC.
+	Changes for picky compilers from Ed Gould of Digital Equipment.
+	Hesiod support for UDB from Todd Miller of the University of
+		Colorado.  Use "hesiod" as the service name in the U
+		option.
+	Fix a problem that failed to set the "authentic" host name (that
+		is, the one derived from the socket info) if you called
+		sendmail -bs from inetd.  Based on code contributed by
+		Todd Miller (this problem was also reported by Guy Helmer
+		of Dakota State University).  This also fixes a related
+		problem reported by Liudvikas Bukys of the University of
+		Rochester.
+	Parameterize "nroff -h" in all the Makefiles so people with
+		variant versions can use them easily.  Suggested by
+		Peter Collinson of Hillside Systems.
+	SMTP "MAIL" commands with multiple ESMTP parameters required two
+		spaces between parameters instead of one.  Reported by
+		Valdis Kletnieks of Virginia Tech.
+	Reduce the number of system calls during message collection by
+		using global timeouts around the collect() loop.  This
+		code was contributed by Eric Wassenaar.
+	If the initial hostname name gathering results in a name
+		without a dot (usually caused by NIS misconfiguration)
+		and BIND is compiled in, directly access DNS to get
+		the canonical name.  This should make life easier for
+		Solaris systems.  If it still can't be resolved, and
+		if the name server is listed as "required", try again
+		in 30 seconds.  If that also fails, exit immediately to
+		avoid bogus "config error: mail loops back to myself"
+		messages.
+	Improve the "MAIL DELETED BECAUSE OF LACK OF DISK SPACE" error
+		message to explain how much space was available and
+		sound a bit less threatening.  Suggested by Stan Janet
+		of the National Institute of Standards and Technology.
+	If mail is delivered to an alias that has an owner, deliver any
+		requested return-receipt immediately, and strip the
+		Return-Receipt-To: header from the subsequent message.
+		This prevents a certain class of denial of service
+		attack, arguably gives more reasonable semantics, and
+		moves things more towards what will probably become a
+		network standard.  Suggested by Christopher Davis of
+		Kapor Enterprises.
+	Add a "noreceipts" privacy flag to turn off all return receipts
+		without recompiling.
+	Avoid printing ESMTP parameters as part of the error message
+		if there are errors during parsing.  This change is
+		purely cosmetic.
+	Avoid sending out error messages during the collect phase of
+		SMTP; there is an MVS mailer from UCLA that gets
+		confused by this.  Of course, I think it's their bug....
+	Check for the $j macro getting undefined, losing a dot, or getting
+		lost from $=w in the daemon before accepting a connection;
+		if it is, it dumps state, prints a LOG_ALERT message,
+		and drops core for debugging.  This is an attempt to
+		track down a bug that I thought was long since gone.
+		If you see this, please forward the log fragment to
+		sendmail@CS.Berkeley.EDU.
+	Change OLD_NEWDB from a #ifdef to a #if so it can be turned off
+		with -DOLD_NEWDB=0 on the command line.  From Christophe
+		Wolfhugel.
+	Instead of trying to truncate the listen queue for the server
+		SMTP port when the load average is too high, just close
+		the port completely and reopen it later as needed.
+		This ensures that the other end gets a quick "connection
+		refused" response, and that the connection can be
+		recovered later.  In particular, some socket emulations
+		seem to get confused if you tweak the listen queue
+		size around and can never start listening to connections
+		again.  The down side is that someone could start up
+		another daemon process in the interim, so you could
+		have multiple daemons all not listening to connections;
+		this could in turn cause the sendmail.pid file to be
+		incorrect.  A better approach might be to accept the
+		connection and give a 421 code, but that could break
+		other mailers in mysterious ways and have paging behaviour
+		implications.
+	Fix a glitch in TCP-level debugging that caused flag 16.101 to
+		set debugging on the wrong socket.  From Eric Wassenaar.
+	When creating a df* temporary file, be sure you truncate any
+		existing data in the file -- otherwise system crashes
+		and the like could result in extra data being sent.
+	DOC: Replace the CHANGES-R5-R8 readme file with a paper in the
+		doc directory.  This includes some additional
+		information.
+	CONFIG: change UUCP rules to never add $U! or $k! on the front
+		of recipient envelope addresses.  This should have been
+		handled by the $&h trick, but broke if people were
+		mixing domainized and UUCP addresses.  They should
+		probably have converted all the way over to uucp-uudom
+		instead of uucp-{new,old}, but the failure mode was to
+		loop the mail, which was bad news.
+	Portability fixes:
+		Newer BSDI systems (several people).
+		Older BSDI systems from Christophe Wolfhugel.
+		Intergraph CLIX, from Paul Southworth of CICNet.
+		UnixWare, from Evan Champion.
+		NetBSD from Adam Glass.
+		Solaris from Quentin Campbell of the University of
+			Newcastle upon Tyne.
+		IRIX from Dean Cookson and Bill Driscoll of Mitre
+			Corporation.
+		NCR 3000 from Kevin Darcy of Chrysler Corporation.
+		SunOS (it has setsid() and setvbuf() calls) from
+			Jonathan Kamens of OpenVision Technologies.
+		HP-UX from Tor Lillqvist.
+	New Files:
+		src/Makefile.CLIX
+		src/Makefile.NCR3000
+		doc/changes/Makefile
+		doc/changes/changes.me
+		doc/changes/changes.ps
+
+8.6.8/8.6.6	94/03/21
+	SECURITY: it was possible to read any file as root using the
+		E (error message) option.  Reported by Richard Jones;
+		fixed by Michael Corrigan and Christophe Wolfhugel.
+
+8.6.7/8.6.6	94/03/14
+	SECURITY: it was possible to get root access by using wierd
+		values to the -d flag.  Thanks to Alain Durand of
+		INRIA for forwarding me the notice from the bugtraq
+		list.
+
+8.6.6/8.6.6	94/03/13
+	SECURITY: the ability to give files away on System V-based
+		systems proved dangerous -- don't run as the owner
+		of a :include: file on a system that allows giveaways.
+		Unfortunately, this also applies to determining a
+		valid shell.
+	IMPORTANT: Previous versions weren't expiring old connections
+		in the connection cache for a long time under some
+		circumstances.  This could result in resource exhaustion,
+		both at your end and at the other end.  This checks the
+		connections for timeouts much more frequently.  From
+		Doug Anderson of NCSC.
+	Fix a glitch that snuck in that caused programs to be run as
+		the sender instead of the recipient if the mail was
+		from a local user to another local user.  From
+		Motonori Nakamura of Kyoto University.
+	Fix "wildcard" on /etc/shell matching -- instead of looking
+		for "*", look for "/SENDMAIL/ANY/SHELL/".  From
+		Bryan Costales of ICSI.
+	Change the method used to declare the "statfs" availability;
+		instead of HASSTATFS and/or HASUSTAT with a ton of
+		tweaking in conf.c, there is a single #define called
+		SFS_TYPE which takes on one of six values (SFS_NONE
+		for no statfs availability, SFS_USTAT for the ustat(2)
+		syscall, SFS_4ARGS for a four argument statfs(2) call,
+		and SFS_VFS, SFS_MOUNT, or SFS_STATFS for a two argument
+		statfs(2) call with the declarations in <sys/vfs.h>,
+		<sys/mount.h>, or <sys/statfs.h> respectively).
+	Fix glitch in NetInfo support that could return garbage if
+		there was no "/locations/sendmail" property.  From
+		David Meyer of the University of Virginia.
+	Change HASFLOCK from defined/not-defined to a 0/1 definition
+		to allow Linux to turn it off even though it is a
+		BSD-like system.
+	Allow setting of "ident" timeout to zero to turn off the ident
+		protocol entirely.
+	Make 7-bit stripping local to a connection (instead of to a
+		mailer); this allows you to specify that SMTP is a
+		7-bit channel, but revert to 8-bit should it advertise
+		that it supports 8BITMIME.  You still have to specify
+		mailer flag 7 to get this stripping at all.
+	Improve makesendmail script so it handles more cases automatically.
+	Tighten up restrictions on taking ownership of :include: files
+		to avoid problems on systems that allow you to give away
+		files.
+	Fix a problem that made it impossible to rebuild the alias
+		file if it was on a read-only file system.  From
+		Harry Edmon of the University of Washington.
+	Improve MX randomization function.  From John Gardiner Myers
+		of CMU.
+	Fix a minor glitch causing a bogus message to be printed (used
+		%s instead of %d in a printf string for the line number)
+		when a bad queue file was read.  From Harry Edmon.
+	Allow $s to remain NULL on locally generated mail.  I'm not
+		sure this is necessary, but a lot of people have complained
+		about it, and there is a legitimate question as to whether
+		"localhost" is legal as an 822-style domain.
+	Fix a problem with very short line lengths (mailer L= flag) in
+		headers.  This causes a leading space to be added onto
+		continuation lines (including in the body!), and also
+		tries to wrap headers containing addresses (From:, To:,
+		etc) intelligently at the shorter line lengths.  Problem
+		Reported by Lars-Johan Liman of SUNET Operations Center.
+	Log the real user name when logging syserrs, since these can have
+		security implications.  Suggested by several people.
+	Fix address logging of cached connections -- it used to always
+		log the numeric address as zero.  This is a somewhat
+		bogus implementation in that it does an extra system
+		call, but it should be an inexpensive one.  Fix from
+		Motonori Nakamura.
+	Tighten up handling of short syslog buffers even more -- there
+		were cases where the outgoing relay= name was too long
+		to share a line with delay= and mailer= logging.
+	Limit the overhead on split envelopes to one open file descriptor
+		per envelope -- previously the overhead was three
+		descriptors.  This was in response to a problem reported
+		by P{r (Pell) Emanuelsson.
+	Fixes to better handle the case of unexpected connection closes;
+		this redirects the output to the transcript so the info
+		is not lost.  From Eric Wassenaar.
+	Fix potential string overrun if you macro evaluate a string that
+		has a naked $ at the end.  Problem noted by James Matheson
+		<jmrm@eng.cam.ac.uk>.
+	Make default error number on $#error messages 553 (``Requested
+		action not taken: mailbox name not allowed'') instead of
+		501 (``Syntax error in parameters or arguments'') to
+		avoid bogus "protocol error" messages.
+	Strip off any existing trailing dot on names during $[ ... $]
+		lookup.  This prevents it from ending up with two dots
+		on the end of dot terminated names.  From Wesley Craig
+		of the University of Michigan and Bryan Costales of ICSI.
+	Clean up file class reading so that the debugging information is
+		more informative.  It hadn't been using setclass, so you
+		didn't see the class items being added.
+	Avoid core dump if you are running a version of sendmail where
+		NIS is compiled in, and you specify an NIS map, but
+		NIS is not running.  Fix from John Oleynick of
+		Rutgers.
+	Diagnose bizarre case where res_search returns a failure value,
+		but sets h_errno to a success value.
+	Make sure that "too many hops" messages are considered important
+		enough to send an error to the Postmaster (that is, the
+		address specified in the P option).  This fix should
+		help problems that cause the df file to be left around
+		sometimes -- unfortunately, I can't seem to reproduce
+		the problem myself.
+	Avoid core dump (null pointer reference) on EXPN command; this
+		only occurred if your log level was set to 10 or higher
+		and the target account was an alias or had a .forward file.
+		Problem noted by Janne Himanka.
+	Avoid "denial of service" attacks by someone who is flooding your
+		SMTP port with bad commands by shutting the connection
+		after 25 bad commands are issued.  From Kyle Jones of
+		UUNET.
+	Fix core dump on error messages with very long "to" buffers;
+		fmtmsg overflows the message buffer.  Fixed by trimming
+		the to address to 203 characters.  Problem reported by
+		John Oleynick.
+	Fix configuration for HASFLOCK -- there were some spots where
+		a #ifndef was incorrectly #ifdef.  Pointed out by
+		George Baltz of the University of Maryland.
+	Fix a typo in savemail() that could cause the error message To:
+		lists to be incorrect in some places.  From Motonori
+		Nakamura.
+	Fix a glitch that can cause duplicate error messages on split
+		envelopes where an address on one of the lists has a
+		name server failure.  Fix from Voradesh Yenbut of the
+		University of Washington.
+	Fix possible bogus pointer reference on ESMTP parameters that
+		don't have an ``=value'' part.
+	CNAME loops caused an error message to be generated, but also
+		re-queued the message.  Changed to just re-queue the
+		message (it's really hard to just bounce it because
+		of the wierd way the name server works in the presence
+		of CNAME loops).  Problem noted by James M.R.Matheson
+		of Cambridge University.
+	Avoid giving ``warning: foo owned process doing -bs'' messages
+		if they use ``MAIL FROM:<foo>'' where foo is their true
+		user name.  Suggested by Andreas Stolcke of ICSI.
+	Change the NAMED_BIND compile flag to be a 0/1 flag so you can
+		override it easily in the Makefile -- that is, you can
+		turn it off using -DNAMED_BIND=0.
+	If a gethostbyname(...) of an address with a trailing dot fails,
+		try it without the trailing dot.  This is because if
+		you have a version of gethostbyname() that falls back
+		to NIS or the /etc/hosts file it will fail to find
+		perfectly reasonable names that just don't happen to
+		be dot terminated in the hosts file.  You don't want to
+		strip the dot first though because we're trying to ensure
+		that country names that match one of your subdomains get
+		a chance.
+	PRALIASES: fix bogus output on non-null-terminated strings.
+		From Bill Gianopoulos of Raytheon.
+	CONFIG: Avoid rewriting anything that matches $w to be $j.
+		This was in code intended to only catch the self-literal
+		address (that is, [1.2.3.4], where 1.2.3.4 is your
+		IP address), but the code was broken.  However, it will
+		still do this if $M is defined; this is necessary to
+		get client configurations to work (sigh).  Note that this
+		means that $M overrides :mailname entries in the user
+		database!  Problem noted by Paul Southworth.
+	CONFIG: Fix definition of Solaris help file location.  From
+		Steve Cliffe <steve@gorgon.cs.uow.edu.au>.
+	CONFIG: Fix bug that broke news.group.USENET mappings.
+	CONFIG: Allow declaration of SMTP_MAILER_MAX, FAX_MAILER_MAX,
+		and USENET_MAILER_MAX to tweak the maximum message
+		size for various mailers.
+	CONFIG: Change definition of USENET_MAILER_ARGS to include argv[0]
+		instead of assuming that it is "inews" for consistency
+		with other mailers.  From Michael Corrigan of UC San Diego.
+	CONFIG: When mail is forwarded to a LOCAL_RELAY or a MAIL_HUB,
+		qualify the address in the SMTP envelope as user@{relay|hub}
+		instead of user@$j.  From Bill Wisner of The Well.
+	CONFIG: Fix route-addr syntax in nullrelay configuration set.
+	CONFIG: Don't turn off case mapping of user names in the local
+		mailer for IRIX.  This was different than most every other
+		system.
+	CONFIG: Avoid infinite loops on certainly list:; syntaxes in
+		envelope.  Noted by Thierry Besancon
+		<besancon@excalibur.ens.fr>.
+	CONFIG: Don't include -z by default on uux line -- most systems
+		don't want it set by default.  Pointed out by Philippe
+		Michel of Thomson CSF.
+	CONFIG: Fix some bugs with mailertables -- for example, if your
+		host name was foo.bar.ray.com and you matched against
+		".ray.com", the old implementation bound %1 to "bar"
+		instead of "foo.bar".  Also, allow "." in the mailertable
+		to match anything -- essentially, take over SMART_HOST.
+		This also moves matching of explicit local host names
+		before the mailertable so they don't have to be special
+		cased in the mailertable data.  Reported by Bill
+		Gianopoulos of Raytheon; the fix for the %1 binding
+		problem was contributed by Nicholas Comanos of the
+		University of Sydney.
+	CONFIG: Don't include "root" in class $=L (users to deliver
+		locally, even if a hub or relay exists) by default.
+		This is because of the known bug where definition of
+		both a LOCAL_RELAY and a MAIL_HUB causes $=L to ignore
+		both and deliver into the local mailbox.
+	CONFIG: Move up bitdomain and uudomain handling so that they
+		are done before .UUCP class matching; uudomain was
+		reported as ineffective before.  This also frees up
+		diversion 8 for future use.  Problem reported by Kimmo
+		Suominen.
+	CONFIG: Don't try to convert dotted IP address (e.g., [1.2.3.4])
+		into host names.  As pointed out by Jonathan Kamens,
+		these are often used because either the forward or reverse
+		mapping is broken; this translation makes it broken again.
+	DOC: Clarify $@ and $: in the Install & Op Guide.  From Kimmo
+		Suominen.
+	Portability fixes:
+		Unicos from David L. Kensiski of Sterling Sofware.
+		DomainOS from Don Lewis of Silicon Systems.
+		GNU m4 1.0.3 from Karst Koymans of Utrecht University.
+		Convex from Kimmo Suominen <kim@tac.nyc.ny.us>.
+		NetBSD from Adam Glass <glass@sun-lamp.cs.berkeley.edu>.
+		BSD/386 from Tony Sanders of BSDI.
+		Apollo from Eric Wassenaar.
+		DGUX from Doug Anderson.
+		Sequent DYNIX/ptx 2.0 from Tim Wright of Sequent.
+	NEW FILES:
+		src/Makefile.DomainOS
+		src/Makefile.PTX
+		src/Makefile.SunOS.5.1
+		src/Makefile.SunOS.5.2
+		src/Makefile.SunOS.5.x
+		src/mailq.1
+		cf/ostype/domainos.m4
+		doc/op/Makefile
+		doc/intro/Makefile
+		doc/usenix/Makefile
+
+8.6.5/8.6.5	94/01/13
+	Security fix:  /.forward could be owned by anyone (the test
+		to allow root to own any file was backwards).  From
+		Bob Campbell at U.C. Berkeley.
+	Security fix: group ids were not completely set when programs
+		were invoked.  This caused programs to have group
+		permissions they should not have had (usually group
+		daemon instead of their own group).  In particular,
+		Perl scripts would refuse to run.
+	Security: check to make sure files that are written are not
+		symbolic links (at least under some circumstances).
+		Although this does not respond to a specific known
+		attack, it's just a good idea.  Suggested by
+		Christian Wettergren.
+	Security fix: if a user had an NFS mounted home directory on
+		a system with a restricted shell listed in their
+		/etc/passwd entry, they could still execute any
+		program by putting that in their .forward file.
+		This fix prevents that by insisting that their shell
+		appear in /etc/shells before allowing a .forward to
+		execute a program or write a file.  You can disable
+		this by putting "*" in /etc/shells.  It also won't
+		permit world-writable :include: files to reference
+		programs or files (there's no way to disable this).
+		These behaviours are only one level deep -- for
+		example, it is legal for a world-writable :include:
+		file to reference an alias that writes a file, on
+		the assumption that the alias file is well controlled.
+	Security fix: root was not treated suspiciously enough when
+		looking into subdirectories.  This would potentially
+		allow a cracker to examine files that were publically
+		readable but in a non-publically searchable directory.
+	Fix a problem that causes an error on QUIT on a cached
+		connection to create problems on the current job.
+		These are typically unrelated, so errors occur in
+		the wrong place.
+	Reset CurrentLA in sendall() -- this makes sendmail queue
+		runs more responsive to load average, and fixes a
+		problem that ignored the load average in locally
+		generated mail.  From Eric Wassenaar.
+	Fix possible core dump on aliases with null LHS.  From
+		John Orthoefer of BB&N.
+	Revert to using flock() whenever possible -- there are just
+		too many bugs in fcntl() locking, particularly over
+		NFS, that cause sendmail to fail in perverse ways.
+	Fix a bug that causes the connection cache to get confused
+		when sending error messages.  This resulted in
+		"unexpected close" messages.  It should fix itself
+		on the following queue run.  Problem noted by
+		Liudvikas Bukys of the University of Rochester.
+	Include $k in $=k as documented in the Install & Op Guide.
+		This seems odd, but it was documented....  From
+		Michael Corrigan of UCSD.
+	Fix problem that caused :include:s from alias files to be
+		forced to be owned by root instead of daemon
+		(actually DefUid).  From Tim Irvin.
+	Diagnose unrecognized I option values -- from Mortin Forssen
+		of the Chalmers University of Technology.
+	Make "error" mailer work consistently when there is no error
+		code associated with it -- previously it returned OK
+		even though there was a real problem.  Now it assumes
+		EX_UNAVAILABLE.
+	Fix bug that caused the last header line of messages that had
+		no body and which were terminated with EOF instead of
+		"." to be discarded.  Problem noted by Liudvikas Bukys.
+	Fix core dump on SMTP mail to programs that failed -- it tried
+		to go to a "next MX host" when none existed, causing
+		a core dump.  From der Mouse at McGill University.
+	Change IDENTPROTO from a defined/not defined to a 0/1 switch;
+		this makes it easier to turn it off (using
+		-DIDENTPROTO=0 in the Makefile).  From der Mouse.
+	Fix YP_MASTER_NAME store to use the unupdated result of
+		gethostname() (instead of myhostname(), which tries
+		to fully qualify the name) to be consistent with
+		SunOS.  If your hostname is unqualified, this fixes
+		transfers to slave servers.  Bug noted by Keith
+		McMillan of Ameritech Services, Inc.
+	Fix Ultrix problem: gethostbyname() can return a very large
+		(> 500) h_length field, which causes the sockaddr
+		to be trashed.  Use the size of the sockaddr instead.
+		Fix from Bob Manson of Ohio State.
+	Don't assume "-a." on host lookups if NAMED_BIND is not
+		defined -- this confuses gethostbyname on hosts
+		file lookups, which doesn't understand the trailing
+		dot convention.
+	Log SMTP server subprocesses that die with a signal instead
+		of from a clean exit.
+	If you don't have option "I" set, don't assume that a DNS
+		"host unknown" message is authoritative -- it
+		might still be found in /etc/hosts.
+	Fix a problem that would cause Deferred: messages to be sent
+		as the subject of an error message, even though the
+		actual cause of a message was more severe than that.
+		Problem noted by Chris Seabrook of OSSI.
+	Fix race condition in DBM alias file locking.  From Kyle
+		Jones of UUNET.
+	Limit delivery syslog line length to avoid bugs in some
+		versions of syslog(3).  This adds a new compile time
+		variable SYSLOG_BUFSIZE.  From Jay Plett of Princeton
+		University, which is in turn derived from IDA.
+	Fix quotes inside of comments in addresses -- previously
+		it insisted that they be balanced, but the 822 spec
+		says that they should be ignored.
+	Dump open file state to syslog upon receiving SIGUSR1 (for
+		debugging).  This also evaluates ruleset 89, if set
+		(with the null input), and logs the result.  This
+		should be used sparingly, since the rewrite process
+		is not reentrant.
+	Change -qI, -qR, and -qS flags to be case-insensitive as
+		documented in the Bat Book.
+	If the mailer returned EX_IOERR or EX_OSERR, sendmail did not
+		return an error message and did not requeue the message.
+		Fix based on code from Roland Dirlewanger of
+		Reseau Regional Aquarel, Bordeaux, France.
+	Fix a problem that caused a seg fault if you got a 421 error
+		code during some parts of connection initialization.
+		I've only seen this when talking to buggy mailers on
+		the other end, but it shouldn't give a seg fault in
+		any case.  From Amir Plivatsky.
+	Fix core dump caused by a ruleset call that returns null.
+		Fix from Bryan Costales of ICSI.
+	Full-Name: field was being ignored.  Fix from Motonori Nakamura
+		of Kyoto University.
+	Fix a possible problem with very long input lines in setproctitle.
+		From P{r Emanuelsson.
+	Avoid putting "This is a warning message" out on return receipts.
+		Suggested by Douglas Anderson.
+	Detect loops caused by recursive ruleset calls.  Suggested by
+		Bryan Costales.
+	Initialize non-alias maps during alias rebuilds -- they may be
+		needed for parsing.  Problem noted by Douglas Anderson.
+	Log sender address even if no message was collected in SMTP
+		(e.g., if all RCPTs failed).  Suggested by Motonori
+		Nakamura.
+	Don't reflect the owner-list contents into the envelope sender
+		address if the value contains ", :, /, or | (to avoid
+		illegal addresses appearing there).
+	Efficiency hack for toktype macro -- from Craig Partridge of
+		BB&N.
+	Clean up DNS error printing so that a host name is always
+		included.
+	Remember to set $i during queue runs.  Reported by Stephen
+		Campbell of Dartmouth University.
+	If ${HOSTALIASES} is set, use it during canonification so that
+		headers are properly mapped.  Reported by Anne Bennett
+		of Concordia University.
+	Avoid printing misleading error message if SMTP mailer (not
+		using [IPC]) should die on a core dump.
+	Avoid incorrect diagnosis of "file 1 closed" when it is caused
+		by the other end closing the connection.  From
+		Dave Morrison of Oracle.
+	Improve several of the error messages printed by "mailq"
+		to include a host name or other useful information.
+	Add NetInfo preliminary support for NeXT systems.  From Vince
+		DeMarco.
+	Fix a glitch that sometimes caused :include:s that pointed to
+		NFS filesystems that were down to give an "aliasing/
+		forwarding loop broken" message instead of queueing
+		the message for retry.  Noted by William C Fenner of
+		the NRL Connection Machine Facility.
+	Fix a problem that could cause a core dump if the input sequence
+		had (or somehow acquired) a \231 character.
+	Make sure that route-addrs always have <angle brackets> around
+		them in non-SMTP envelopes (SMTP envelopes already do
+		this properly).
+	Avoid wierd headers on unbalanced punctuation of the form:
+		``Joe User <user)'' -- this caused reference to the
+		null macro.  Fix from Rick McCarty of IO.COM.
+	Fix a problem that caused an alias "user: user@local.host" to
+		not have the QNOTREMOTE bit set; this caused configs
+		to act as if FEATURE(notsticky) was defined even when
+		it was not.  The effect of the problem was to make it
+		very hard to to set up satellite sites that had a few
+		local accounts, with everything else forwarded to a
+		corporate hub.  Reported by Detlef Drewanz of the
+		University of Rostock and Mark Frost of NCD.
+	Change queuing to not call rulesets 3, {1 or 2}, 4 on header
+		addresses.  This is more efficient (fewer name server
+		calls) and fixes certain unusual configurations, such
+		as those that have ruleset 4 do something that is
+		non-idempotent unless a mailer-specific ruleset did
+		something else.  Problem reported by Brian J. Coan
+		of the Institute for Global Communications.
+	Fix the "obsolete argument" routine in main to better understand
+		new arguments.  For example, if you used ``sendmail
+		-C config -v -q'' it would choke on the -q because
+		the -C would stop looking for old-format arguments.
+	Fix the code that was intended to allow two users to forward their
+		mail to the same program and have them appear unique.
+	Portability fixes for:
+		SCO UNIX from Murray Kucherawy.
+		SCO Open Server 3.2v4 from Philippe Brand.
+		System V Release 4 from Rick Ellis and others.
+		OSF/1 from Steve Campbell.
+		DG/UX from Ben Mesander of the USGS and Bryan Curnutt
+			of Stoner Associates.
+		Motorola SysV88 from Kevin Johnson of Motorola.
+		Solaris 2.3 from Casper H.S. Dik of the University
+			of Amsterdam and John Caruso of University
+			of Maryland.
+		FreeBSD from Ollivier Robert.
+		NetBSD from Adam Glass.
+		TitanOS from Kate Hedstrom of Rutgers University.
+		Irix from Bryan Curnutt.
+		Dynix from Jim Davis of the University of Arizona.
+		RISC/os.
+		Linux from John Kennedy of California State University
+			at Chico.
+		Solaris 2.x from Tony Boner of the U.S. Air Force.
+		NEXTSTEP 3.x from Vince DeMarco.
+		HP-UX from various people.  NOTA BENE:  the location
+			of the config file has moved to /usr/lib
+			to match the HP-UX version of sendmail.
+	CONFIG: Don't do any recipient rewriting on relay mailer;
+		since this is intended only for internal use, the
+		usual RFC 821/822/1123 rules can be relaxed.  The
+		main point of this is to avoid munging (ugh) UUCP
+		addresses when relaying internally.
+	CONFIG: fix typo in mailer/uucp.m4 that mutilates list:;
+		syntax addresses delivered via UUCP.  Solution
+		provided by Peter Wemm.
+	CONFIG: fix thumb-fumble in default UUCP relaying in ruleset
+		zero; it caused double @ signs in addresses.  From
+		Irving Reid of the University of Toronto.
+	CONFIG: Portability fixes for SCO Unix 3.2 with TCP/IP 1.2.1
+		from Markku Toijala of ICL Personal Systems Oy.
+	CONFIG: Add trailing "." on pseudo-domains for consistency;
+		this fixes a problem (noted by Al Whaley of Sunnyside)
+		that made it hard to recognize your own pseudodomain
+		names.
+	CONFIG: catch "@host" syntax errors (i.e., null local-parts)
+		rather than letting them get "local configuration
+		error"s.  Problem noted by John Gardiner Myers.
+	CONFIG: add uucp-uudom mailer variant, based on code posted
+		by Spider Boardman <spider@Orb.Nashua.NH.US>; this
+		has uucp-dom semantics but old UUCP syntax.  This
+		also permits "uucp-old" as an alias for "uucp" and
+		"uucp-new" as a synonym for "suucp" for consistency.
+	CONFIG: add POP mailer support (from Kimmo Suominen
+		<kim@grendel.lut.fi>).
+	CONFIG: drop CSNET_RELAY support -- CSNET is long gone.
+	CONFIG: fix bug caused with domain literal addresses (e.g.,
+		``[128.32.131.12]'') when FEATURE(allmasquerade)
+		was set; it would get an additional @masquerade.host
+		added to the address.  Problem noted by Peter Wan
+		of Georgia Tech.
+	CONFIG: make sure that the local UUCP name is in $=w.  From
+		Jim Murray of Stratus.
+	CONFIG: changes to UUCP rewriting to simulate IDA-style "V"
+		mailer flag.  Briefly, if you are sending to host
+		"foo", then it rewrites "foo!...!baz" to "...!baz",
+		"foo!baz" remains "foo!baz", and anything else has
+		the local name prepended.
+	CONFIG: portability fixes for HP-UX.
+	DOC: several minor problems fixed in the Install & Op Guide.
+	MAKEMAP: fix core dump problem on lines that are too long or
+		which lack newline.  From Mark Delany.
+	MAILSTATS: print sums of columns (total messages & kbytes
+		in and out of the system).  From Tom Ferrin of UC
+		San Francisco Computer Graphics Lab.
+	SIGNIFICANT USER- OR SYSAD-VISIBLE CHANGES:
+		On HP-UX, /etc/sendmail.cf has been moved to
+			/usr/lib/sendmail.cf to match HP sendmail.
+		Permissions have been tightened up on world-writable
+			:include: files and accounts that have shells
+			that are not listed in /etc/shells.  This may
+			cause some .forward files that have worked
+			before to start failing.
+		SIGUSR1 dumps some state to the log.
+	NEW FILES:
+		src/Makefile.DGUX
+		src/Makefile.Dynix
+		src/Makefile.FreeBSD
+		src/Makefile.Mach386
+		src/Makefile.NetBSD
+		src/Makefile.RISCos
+		src/Makefile.SCO
+		src/Makefile.SVR4
+		src/Makefile.Titan
+		cf/mailer/pop.m4
+		cf/ostype/bsdi1.0.m4
+		cf/ostype/dgux.m4
+		cf/ostype/dynix3.2.m4
+		cf/ostype/sco3.2.m4
+		makemap/Makefile.dist
+		praliases/Makefile.dist
+
+8.6.4/8.6.4	93/10/31
+	Repair core-dump problem (write to read-only memory segment)
+		if you fall back to the return-to-Postmaster case in
+		savemail.  Problem reported by Richard Liu.
+	Immediately diagnose bogus sender addresses in SMTP.  This
+		makes quite certain that crackers can't use this
+		class of attack.
+	Reliability Fix:  check return value from fclose() and fsync()
+		in a few critical places.
+	Minor problem in initsys() that reversed a condition for
+		redirecting the output channel on queue runs.  It's
+		not clear this code even does anything.  From Eric
+		Wassenaar of the Dutch National Institute for Nuclear
+		and High-Energy Physics.
+	Fix some problems that caused queue runs to do "too much work",
+		such as double-reading the Errors-To: header.  From
+		Eric Wassenaar.
+	Error messages on writing the temporary file (including the
+		data file) were getting suppressed in SMTP -- this
+		fix causes them to be properly reported.  From Eric
+		Wassenaar.
+	Some changes to support AF_UNIX sockets -- this will only
+		really become relevant in the next release, but some
+		people need it for local patches.  From Michael
+		Corrigan of UC San Diego.
+	Use dynamically allocated memory (instead of static buffers)
+		for macros defined in initsys() and settime(); since
+		these can have different values depending on which
+		envelope they are in.  From Eric Wassenaar.
+	Improve logging to show ctladdr on to= logging; this tells you
+		what uid/gid processes ran as.
+	Fix a problem that caused error messages to be discarded if
+		the sender address was unparseable for some reason;
+		this was supposed to fall back to the "return to
+		postmaster" case.
+	Improve aliaswait backoff algorithm.
+	Portability patches for Linux (8.6.3 required another header
+		file) (from Karl London) and SCO UNIX.
+	CONFIG: patch prog mailer to not strip host name off of envelope
+		addresses (so that it matches local again).  From
+		Christopher Davis.
+	CONFIG: change uucp-dom mailer so that "<>" translates to $n;
+		this prevents uux from seeing lines with null names like
+		``From   Sat Oct 30 14:55:31 1993''.  From Motonori
+		Nakamura of Kyoto University.
+	CONFIG: handle <list:;> syntax correctly.  This isn't legal, but
+		it shouldn't fail miserably.  From Motonori Nakamura.
+
+8.6.3/8.6.3	93/10/24
+	IMPORTANT FIX: Fix several problems that caused open files to
+		be "lost" during queue runs; this overflowed the open
+		file table on large runs.  An assumption that fdopen
+		always succeeds sometimes resulted in core dumps when
+		this happens; sometimes the message is delivered twice,
+		sometimes (probably) infinite times.  This problem in
+		various form was reported by P{r (Pell) Emanuelsson and
+		Robert Campbell of U.C. Berkeley.
+	Special diagnosis of EMFILE error conditions -- it now prints
+		the known open file descriptors so you can figure out
+		what is consuming so much resources.
+	Fix a couple of problems caused by early address parsing
+		errors -- one caused it to return a "this is only a
+		warning" when it really wasn't, and the other started
+		parsing through a random pointer.  The first was
+		noted by Eric Wassenaar.
+	Fix an infinite loop problem caused by null components in the
+		host signature.  Problem noted by Jan Sorensen.
+	Be sure to reset the "current date" when sending an error
+		message -- PostMasterCopy messages were being sent
+		with an old Date: header.
+	Fix a problem that caused duplicated mail when sendmail was
+		(1) compiled without HASFLOCK, (2) you are sending to
+		an alias that has an owner-* alias, (3) you execute
+		sendmail with -t flag, (4) you run in -odb mode, and
+		(5) the sender specifies both the alias name and
+		another alias [i.e., the envelope is split], then
+		duplicate messages are sent.  The problem description
+		and one-line fix are from Motonori Nakamura of Kyoto
+		University.
+	Avoid a problem that causes error messages to be discarded
+		in some cases -- this was the result of a "fix" to
+		avoid duplicate error messages, but two are better
+		than zero.  Reported by Tim Rylance.
+	Fix a minor botch in checkfd012() -- fix from Dave Hill of
+		Computervision R&D Ltd.
+	Remove "X-Authentication-Warning: <user> set sender to <address>
+		using -f" entirely -- it is far too eager to include
+		this, and it is confusing folks.  I'll try to make it
+		work "right" in 8.7.  Problem noted by Yoshitaka
+		Tokugawa of dit Co., Ltd.
+	Fix a race condition with the errno value in tick() and
+		reapchild() -- this caused occasional misdiagnosis
+		of problems.  Kyle Jones of UUNET helped this along.
+	Repair rule loop-detection code.  From Michael Corrigan of
+		U.C. San Diego.
+	Fix a problem that caused sender domain addition (C mailer
+		flag to be ignored if you use -odq or use -odb with
+		a high load average.  Problem reported by Jim Murray
+		of Stratus.
+	Fix ident protocol on multi-homed machines.  It was not
+		always using the correct interface.  Fix from J.R.
+		Oldroyd of Opal.
+	Previously, sendmail assumed that any SMTP greeting message
+		that wasn't 2xx was a temporary failure -- it should
+		only take 4xx as a temporary failure, and return a
+		solid error message on anything else -- for example,
+		to allow you to reject connections on a workstation
+		that is MXed to a mail server.
+	Portability enhancements for 386BSD/FreeBSD/NetBSD from
+		Ollivier Robert.
+	CONFIG: FEATURE(always_add_domain) didn't always add the domain;
+		in particular, on local mail it modified the header sender
+		but not the header recipient address(es).  Reported by
+		Jeffrey Honig of Cornell University.  Also, strip
+		any host from envelope recipient address(es), since
+		local mailers don't understand host names -- this is
+		to help mailertable entries.  From Christopher Davis.
+	CONFIG: masquerading didn't apply to addresses that already
+		had a domain.  This change replaces a local hostname
+		by the masquerade name in the SMTP mailer (previously
+		it only added the masquerade name if it didn't already
+		have a domain name).  Several people complained about
+		this.
+
+8.6.2/8.6.2	93/10/15
+	Put a "successful delivery" message in the transcript for
+		addresses that get return-receipts.
+	Put a prominent "this is only a warning" message in warning
+		messages -- some people don't read carefully enough
+		and end up sending the message several times.
+	Include reason for temporary failure in the "warning" return
+		message.  Currently, it just says "cannot send for
+		four hours".
+	Fix the "Original message received" time generated for
+		returntosender messages.  It was previously listed as
+		the current time.  Bug reported by Eric Hagberg of
+		Cornell University Medical College.
+	If there is an error when writing the body of a message,
+		don't send the trailing dot and wait for a response
+		in sender SMTP, as this could cause the connection to
+		hang up under some bizarre circumstances.  From Eric
+		Wassenaar.
+	Fix some server SMTP synchronization problems caused when
+		connections fail during message collection.  From
+		Eric Wassenaar.
+	Fix a problem that can cause srvrsmtp to reject mail if the
+		name server is down -- it accepts the RCPT but rejects
+		the DATA command.  Problem reported by Jim Murray of
+		Stratus.
+	Fix a problem that can cause core dumps if the config file
+		incorrectly resolves to a null hostname.  Reported by
+		Allan Johannesen of WPI.
+	Non-root use of -C flag, dangerous -f flags, and use of -oQ
+		by non-root users were not put into
+		X-Authentication-Warning:s as intended because the
+		config file hadn't set the PrivacyFlags yet.  Fix
+		from Sven-Ove Westberg of the University of Lulea.
+	Under very odd circumstances, the alias file rebuild code
+		could get confused as to whether a database was
+		open or not.
+	Check "vendor code" on the end of V lines -- this is
+		intended to provide a hook for vendor-specific
+		configuration syntax.  (This is a "new feature",
+		but I've made an exception to my rule in a belief
+		that this is a highly exceptional case.)
+	Portability fixes for DG/UX (from Douglas Anderson of NCSC),
+		SCO Unix (from Murray Kucherawy), A/UX, and OSF/1
+		(from Jon Forrest of UC Berkeley)
+	CONFIG: fix ``mailer:host'' form of UUCP relay naming.
+
+8.6.1/8.6	93/10/08
+	Portability fixes for A/UX and Encore UMAX V.
+	Fix error message handling -- if you had a name server down
+		causing an error during parsing, that message was never
+		propogated to the queue file.
+
+8.6/8.6		93/10/05
+	Configuration cleanup: make it easier to undo IDENTPROTO in
+		conf.h (other systems have the same bug).
+	If HASGETDTABLESIZE and _SC_OPEN_MAX are both defined, assume
+		getdtablesize() instead of sysconf(); a disturbingly
+		large number of systems defined _SC_OPEN_MAX in the
+		header files but don't have the syscall.
+	Another patch to really truly ignore MX records in getcanonname
+		if trymx == FALSE.
+	Fix problem that caused the "250 IAA25499 Message accepted for
+		delivery" message to be omitted if there was an error
+		in the header of the message (e.g., a bad Errors-To:
+		line).  Pointed out by Michael Corrigan of UCSD.
+	Announce name of host we are chatting when we get errors; this
+		is an IDA-ism suggested by Christophe Wolfhugel.
+	Portability fixes for Alpha OSF/1 (from Anthony Baxter of the
+		Australian Artificial Intelligence Institute), SCO Unix
+		(from Murray Kucherawy of Hookup Communication Corp.),
+		NeXT (from Vince DeMarco and myself), Linux (from
+		Karl London <karl@borg.demon.co.uk>), BSDI (from
+		Christophe Wolfhugel, and SVR4 on Dell (from Kimmo
+		Suominen), AUX 3.0 on Macintosh, and ANSI C compilers.
+	Some changes to get around gcc optimizer bugs.  From Takahiro
+		Kanbe.
+	Fix error recovery in queueup if another tf file of the same
+		name already exists.  Problem stumbled over by Bill
+		Wisner of The Well.
+	Output YP_MASTER_NAME and YP_LAST_MODIFIED without null bytes.
+		Problem noted by Keith McMillan of Ameritech Services.
+	Deal with group permissions properly when opening .forward and
+		:include: files.  This relaxes the 8.1C restrictions
+		slightly more.  This includes proper setting of groups
+		when reading :include: files, allowing you to read some
+		files that you should be able to read but have previously
+		been denied unless you owned them or they had "other"
+		read permission.
+	Make certain that $j is in $=w (after the .cf is read) so that
+		if the user is forced to override some silly system,
+		MX suppression will still work.
+	Fix a couple of efficiency problems where newstr was double-
+		calling expensive routines.  In at least one case, it
+		wasn't guaranteed that they would always return the
+		same result.  Problem noted by Christophe Wolfhugel.
+	Fix null pointer dereference in putoutmsg -- only on an error
+		condition from a non-SMTP mailer.  From Motonori
+		Nakamura.
+	Macro expand "C" line class definitions before scanning so that
+		"CX $Z" works.
+	Fix problem that caused error message to be sent while still
+		trying to send the original message if the connection
+		is closed during a DATA command after getting an error
+		on an RCPT command (pretty obscure).  Problem reported
+		by John Myers of CMU.
+	Fix reply to NOOP to be 250 instead of 200 -- this is a long
+		term bug.
+	Fix a nasty bug causing core dumps when returning the "warning:
+		cannot deliver for N hours -- will keep trying" message;
+		it only occurred if you had PostMasterCopy set and
+		only on some architectures.  Although sendmail would
+		keep trying, it would send error messages on each
+		queue interval.  This is an important fix.
+	Allow u and g options to take user and group names respectively.
+	Don't do a chdir into the queue directory in -bt mode to make
+		ruleset testing a bit easier.
+	Don't allow users to turn off logging (using -oL) on the command
+		line -- command line can only raise, not lower, logging
+		level.
+	Set $u to the original recipient on the SMTP transaction or on
+		the command line.  This is only done if there is exactly
+		one recipient.  Technically, this does not meet the
+		specs, because it does not guarantee a domain on the
+		address.
+	Fix a problem that dumped error messages on bad addresses if
+		you used the -t flag.  Problem noted by Josh Smith of
+		Harvey Mudd College.
+	Given an address such as ``<foo> <bar>'', auto-quote the first
+		``<foo>'' part, giving ``"<foo>" <bar>''.  This is to
+		avoid the problem of people who use angle brackets in
+		their full name information.
+	Fix a null pointer dereference if you set option "l", have
+		an Errors-To: header in the message, and have Errors-To:
+		defined in the config file H lines.  From J.R. Oldroyd.
+	Put YPCOMPAT on #ifdef NIS instead -- it's one less thing to get
+		wrong when compiling.  Suggested by Rick McCarty of TI.
+	Fix a problem that could pass negative SIZE parameter if the
+		df file got lost; this would cause servers to always
+		give a temporary failure, making the problem even worse.
+		Problem noted by Allan Johannesen of WPI.
+	Add "ident" timeout (one of the "r" option selectors) for IDENT
+		protocol timeouts (30s default).  Requested by Murray
+		Kucherawy of HookUp Communication Corp. to handle bogus
+		PC TCP/IP implementations.
+	Change $w default definition to be just the first component of
+		the domain name on config level 5.  The $j macro defaults
+		to the FQDN; $m remains as before.  This lets well-behaved
+		config files use any of the short, long, or subdomain
+		names.
+	Add makesendmail script in src to try to automate multi-architecture
+		builds.  I know, this is sub-optimal, but it is still
+		helpful.
+	Fix very obscure race condition that can cause a queue run to
+		get a queue file for an already completed job.  This
+		problem has existed for years.  Problem noted by the
+		long suffering Allan Johannesen of WPI.
+	Fix a problem that caused the raw sender name to be passed to
+		udbsender instead of the canonified name -- this caused
+		it to sometimes miss records that it should have found.
+	Relax check of name on HELO packet so that a program using -bs
+		that claims to be itself works properly.
+	Restore rewriting of $: part of address through 2, R, 4 in
+		buildaddr -- this requires passing a lot of flags to get
+		it right.  Unlike old versions, this ONLY rewrites
+		recipient addresses, not sender addresses.
+	Fix a bug that caused core dumps in config files that cannot
+		resolve /file/name style addresses.  Fix from Jonathan
+		Kamens of OpenVision Technologies.
+	Fix problem with fcntl locking that can cause error returns to
+		be lost if the lock is lost; this required fully
+		queueing everything, dropping the envelope (so errors
+		would get returned), and then re-reading the queue from
+		scratch.
+	Fix a problem that caused aliases that redefine an otherwise
+		true address to still send to the original address
+		if and only if the alias failed in certain bizarre
+		ways (e.g, if they pointed at a list:; syntax address).
+		Problem pointed out by Jonathan Kamens.
+	Remove support for frozen configuration files.  They caused
+		more trouble than it was worth.
+	Fix problem that can cause error messages to get ignored when
+		using both -odb and -t flags.  Problem noted by Rob
+		McNicholas at U.C. Berkeley.
+	Include all "normal" variations on hostname in $=w.  For example,
+		if the host name is vangogh.cs.berkeley.edu, $=w will
+		contain vangogh, vangogh.cs, and vangogh.cs.berkeley.edu.
+	Add "restrictqrun" privacy flag -- without this, anyone can run
+		the queue.
+	Reset SmtpPhase global on initial connection creation so that
+		messages don't come out with stale information.
+	Pass an "ext" argument to lockfile so that error/log messages
+		will properly reflect the true filename being locked.
+	Put all [...] address forms into $=w -- this eliminates the need
+		for MAXIPADDR in conf.h.  Suggested by John Gardiner
+		Myers of CMU.
+	Fix a bug that can cause qf files to be left around even after
+		an SMTP RSET command.  Problem and fix from Michael
+		Corrigan.
+	Don't send a PostMasterCopy to errors when the Precedence: is
+		negative.  Error reports still go to the envelope
+		sender address.
+	Add LA_SHORT for load averages.
+	Lock sendmail.st file when posting statistics.
+	Add "SendBufSize" and "RcvBufSize" suboptions to "O" option to
+		set the size of the TCP send and receive buffers; if you
+		run over a slow slip line you may need to set these down
+		(although it would be better to fix the SLIP implementation
+		so that it's not necessary to recompile every program
+		that does bulk data transfer).
+	Allow null defaults on $( ... $) lookups.  Problem reported by
+		Amir Plivatsky.
+	Diagnose crufty S and V config lines.  This resulted from an
+		observation that some people were using the SITE macro
+		without the SITECONFIG macro first, which was causing
+		bogus config files that were not caught.
+	Fix makemap -f flag to turn off case folding (it was turning it
+		on instead).  THIS IS A USER VISIBLE CHANGE!!!
+	Fix a problem that caused multiple error messages to be sent if
+		you used "sendmail -t -oem -odb", your system uses fcntl
+		locking, and one of the recipient addresses is unknown.
+	Reset uid earlier in include() so that recursive .forwards or
+		:include:s don't use the wrong uid.
+	If file descriptor 0, 1, or 2 was closed when sendmail was
+		called, the code to recover the descriptor was broken.
+		This sometimes (only sometimes) caused problems with the
+		alias file.  Fix from Motonori Nakamura.
+	Fix a problem that caused aliaswait to go into infinite recursion
+		if the @:@ metasymbol wasn't found in the alias file.
+	Improve error message on newaliases if database files cannot be
+		opened or if running with no database format defined.
+	Do a better estimation of the size of error messages when NoReturn
+		is set.  Problem noted by P{r (Pell) Emanuelsson.
+	Fix a problem causing the "c" option (don't connect to expensive
+		mailers) to be ignored in SMTP.  Problem noted and the
+		solution suggested by Robert Elz of Munnari University.
+	Improve connection caching algorithm by passing "[host]" to
+		hostsignature, which strips the square brackets and
+		returns the real name.  This allows mailertable entries
+		to match regular entries.
+	Re-enable Return-Receipt-To: -- people seem to want this stupid
+		feature, even if it doesn't work right.
+	Catch and log attempts to try the "wiz" command in server SMTP.
+		This also ups the log level from LOG_NOTICE to LOG_CRIT.
+	Be more generous at assigning $z to the home directory -- do this
+		for programs that are specified through a .forward file.
+		Fix from Andrew Chang of Sun Microsystems.
+	Always save a fatal error message in preference to a non-fatal
+		error message so that the "subject" line of return
+		messages is the best possible.
+	CONFIG: reduce the number of quotes needed to quote configuration
+		parameters with commas: two quotes should work now, e.g.,
+		define(ALIAS_FILE, ``/etc/aliases,/etc/aliases.local'').
+	CONFIG: class $=Z is a set of UUCP hosts that use uucp-dom
+		connections (domain-ized UUCP).
+	CONFIG: fix bug in default maps (-o must be before database file
+		name).  Pointed out by Christophe Wolfhugel.  
+	CONFIG: add FEATURE(nodns) to state that we are not relying on
+		DNS.  This would presumably be used in UUCP islands.
+	CONFIG: add OSTYPE(nextstep) and OSTYPE(linux).
+	CONFIG: log $u in Received: line.  This is in technical violation
+		of the standards, since it doesn't guarantee a domain
+		on the address.
+	CONFIG: don't assume "m" in local mailer flags -- this means that
+		if you redefine LOCAL_MAILER_FLAGS you will have to include
+		the "m" flag should you want it.  Apparently some Solaris 2.2
+		installations can't handle multiple local recipients.
+		Problem noted by Josh Smith.
+	CONFIG: add confDOMAIN_NAME to set $j (if undefined, $j defaults).
+	CONFIG: change default version level from 4 to 5.
+	CONFIG: add FEATURE(nullclient) to create a config file that
+		forwards all mail to a hub without ever looking at the
+		addresses in any detail.
+	CONFIG: properly strip mailer: information off of relays when
+		used to change .BITNET form into %-hack form.
+	CONFIG: fix a problem that caused infinite loops if presented
+		with an address such as "!foo".
+	CONFIG: check for self literal (e.g., [128.32.131.12]) even if
+		the reverse "PTR" mapping is broken.  There's a better
+		way to do this, but the change is fairly major and I
+		want to hold it for another release.  Problem noted by
+		Bret Marquis.
+
+8.5/8.5		93/07/23
+	Serious bug: if you used a command line recipient that was unknown
+		sendmail would not send a return message (it was treating
+		everything as though it had an SMTP-style client that
+		would do the return itself).  Problem noted by Josh Smith.
+	Change "trymx" option in getcanonname() to ignore all MX data,
+		even during a T_ANY query.  This actually didn't break
+		anything, because the only time you called getcanonname
+		with !trymx was if you already knew there were no MX
+		records, but it is somewhat cleaner.  From Motonori
+		Nakamura.
+	Don't call getcanonname from getmxrr if you already know there
+		are no DNS records matching the name.
+	Fix a problem causing error messages to always include "The
+		original message was received ... from localhost".
+		The correct original host information is now included.
+	Previous change to cf/sh/makeinfo.sh doesn't port to Ultrix (their
+		version of "test" doesn't have the -x flag).  Change it
+		to use -f instead.  From John Myers.
+	CONFIG: 8.4 mistakenly set the default SMTP-style mailer to
+		esmtp -- it should be smtp.
+	CONFIG: send all relayed mail using confRELAY_MAILER (defaults
+		to "relay" (a variant of "smtp") if MAILER(smtp) is used,
+		else "suucp" if MAILER(uucp) is used, else "unknown");
+		this cleans up the configs somewhat.  This fixes a serious
+		problem that caused route-addrs to get mistaken as relays,
+		pointed out by John Myers.  WARNING: this also causes
+		the default on SMART_HOST to change from "suucp" to
+		"relay" if you have MAILER(smtp) specified.
+
+8.4/8.4		93/07/22
+	Add option `w'.  If you receive a message that comes to you because
+		you are the best (lowest preference) target of an MX, and
+		you haven't explicitly recognized the source MX host in
+		your .cf file, this option will cause you to try the target
+		host directly (as if there were no MX for it at all).  If
+		`w' is not set, this case is a configuration error.
+		Beware: if `w' is set, senders may get bogus errors like
+		"message timed out" or "host unknown" for problems that
+		are really configuration errors.  This option is
+		disrecommended, provided only for compatibility with
+		UIUC sendmail.
+	Fix a problem that caused the incoming socket to be left open
+		when sendmail forks after the DATA command.  This caused
+		calling systems to wait in FIN_WAIT_2 state until the
+		entire list was processed and the child closed -- a
+		potentially prodigious amount of time.  Problem noted
+		by Neil Rickert.
+	Fix problem (created in 6.64) that caused mail sent to multiple
+		addresses, one of which was a bad address, to completely
+		suppress the sending of the message.  This changes
+		handling of EF_FATALERRS somewhat, and adds an
+		EF_GLOBALERRS flag.  This also fixes a potential problem
+		with duplicate error messages if there is a syntax error
+		in the header of a message that isn't noticed until late
+		in processing.  Original problem pointed out by Josh Smith
+		of Harvey Mudd College.  This release includes quite a bit
+		of dickering with error handling (see below).
+	Back out SMTP transaction if MAIL gets nested 501 error.  This
+		will only hurt already-broken software and should help
+		humans.
+	Fix a problem that broke aliases when neither NDBM nor NEWDB were
+		compiled in.  It would never read the alias file.
+	Repair unbalanced `)' and `>' (the "open" versions are already
+		repaired).
+	Logging of "done" in dropenvelope() was incorrect: it would
+		log this even when the queue file still existed.  Change
+		this to only log "done" (at log level 11) when the
+		queue file is actually removed.  From John Myers.
+	Log "lost connection" in server SMTP at log level 20 if there
+		is no pending transaction.  Some senders just close the
+		connection rather than sending QUIT.
+	Fix a bug causing getmxrr to add a dot to the end of unqualified
+		domains that do not have MX records -- this would cause
+		the subsequent host name lookup to fail.  The problem
+		only occurred if you had FEATURE(nocanonify) set.
+		Problem noted by Rick McCarty of Texas Instruments.
+	Fix invocation of setvbuf when passed a -X flag -- I had
+		unwittingly used an ANSI C extension, and this caused
+		core dumps on some machines.
+	Diagnose self-destructive alias loops on RCPT as well as EXPN.
+		Previously it just gave an empty send queue, which
+		then gave either "Need RCPT (recipient)" at the DATA
+		(confusing, since you had given an RCPT command which
+		returned 250) or just dropped the email, depending on
+		whether you were running VERBose mode.  Now it usually
+		diagnoses this case as "aliasing/forwarding loop broken".
+		Unfortunately, it still doesn't adequately diagnose
+		some true error conditions.
+	Add internal concept of "warning messages" using 6xx codes.
+		These are not reported only to Postmaster.  Unbalanced
+		parens, brackets, and quotes are printed as 653 codes.
+		They are always mapped to 5xx codes before use in SMTP.
+	Clean up error messages to tell both the actual address that
+		failed and the alias they arose from.  This makes it
+		somewhat easier to diagnose problems.  Difficulty noted
+		by Motonori Nakamura.
+	Fix a problem that inappropriately added a ctladdr to addresses
+		that shouldn't have had one during a queue run.  This
+		caused error messages to be handled differently during
+		a queue run than a direct run.
+	Don't print the qf name and line number if you get errors during
+		the direct run of the queue from srvrsmtp -- this was
+		just extra stuff for users to crawl through.
+	Put command line flags on second line of pid file so you can
+		auto-restart the daemon with all appropriate arguments.
+		Use "kill `head -1 /etc/sendmail.pid`" to stop the
+		daemon, and "eval `tail -1 /etc/sendmail.pid`" to
+		restart it.
+	Remove the ``setuid(getuid())'' in main -- this caused the
+		IDENT daemon to screw up.  This required that I change
+		HASSETEUID to HASSETREUID and complicate the mode
+		changing somewhat because both Ultrix and SunOS seem
+		to have a bug causing seteuid() to set the saved uid
+		as well as the effective.  The program test/t_setreuid.c
+		will test to see if your implementation of setreuid(2)
+		is appropriately functional.
+	The FallBackMX (option V) handling failed to properly identify
+		fallback to yourself -- most of the code was there,
+		but it wasn't being enabled.  Problem noted by Murray
+		Kucherawy of the University of Waterloo.
+	Change :include: open timeout from ETIMEDOUT to an internal
+		code EOPENTIMEOUT; this avoids adding "during SmtpPhase
+		with CurHostName" in error messages, which can be
+		confusing.  Reported by Jonathan Kamens of OpenVision
+		Technologies.
+	Back out setpgrp (setpgid on POSIX systems) call to reset the
+		process group id.  The original fix was to get around
+		some problems with recalcitrant MUAs, but it breaks
+		any call from a shell that creates a process group id
+		different from the process id.  I could try to fix
+		this by diddling the tty owner (using tcsetpgrp or
+		equivalent) but this is too likely to break other
+		things.
+	Portability changes:
+		Support -M as equivalent to -oM on Ultrix -- apparently
+			DECnet calls sendmail with -MrDECnet -Ms<HOST> -bs
+			instead of using standard flags.  Oh joy.  This
+			behaviour reported by Jon Giltner of University
+			of Colorado.
+		SGI IRIX  -- this includes several changes that should
+			help other strict ANSI compilers.
+		SCO Unix -- from Murray Kucherawy of HookUp Communication
+			Corporation.
+		Solaris running the Sun C compiler (which despite the
+			documentation apparently doesn't define
+			__STDC__ by default).
+		ConvexOS from Eric Schnoebelen of Convex.
+		Sony NEWS workstations and Omron LUNA workstations from
+			Motonori Nakamura.
+	CONFIG: add confTRY_NULL_MX_LIST to set option `w'.
+	CONFIG: delete `C' and `e' from default SMTP mailers flags;
+		several people have made a good argument that this
+		creates more problems than it solves (although this
+		may prove painful in the short run).
+	CONFIG: generalize all the relays to accept a "mailer:host"
+		format.
+	CONFIG: move local processing in ruleset 0 into a new ruleset
+		98 (8 on old sendmail).  Domain literal [a.b.c.d]
+		addresses are also passed through this ruleset.
+	CONFIG: if neither SMART_HOST nor MAILER(smtp) were defined,
+		internet-style addresses would "fall off the end" of
+		ruleset zero and be interpreted as local -- however,
+		the angle brackets confused the recursive call.
+		These are now diagnosed as "Unrecognized host name".
+	CONFIG: USENET rules weren't included in S0 because of a mistaken
+		ifdef(`_MAILER_USENET_') instead of
+		ifdef(`_MAILER_usenet_').  Problem found by Rein Tollevik
+		of SINTEF RUNIT, Oslo.
+	CONFIG: move up LOCAL_RULE_0 processing so that it happens very
+		early in ruleset 0; this allows .mc authors to bypass
+		things like the "short circuit" code for local addresses.
+		Prompted by a comment by Bill Wisner of The Well.
+	CONFIG: add confSMTP_MAILER to define the mailer used (smtp or
+		esmtp) to send SMTP mail.  This allows you to default
+		to esmtp but use a mailertable or other override to
+		deal with broken servers.  This logic was pointed out
+		to me by Bill Wisner.  Ditto for confLOCAL_MAILER.
+	Changes to cf/sh/makeinfo.sh to make it portable to SVR4
+		environments.  Ugly as sin.
+
+8.3/8.3		93/07/13
+	Fix setuid problems introduced in 8.2 that caused messages
+		like "Cannot create qfXXXXXX: Invalid argument"
+		or "Cannot reopen dfXXXXXX: Permission denied".  This
+		involved a new compile flag "HASSETEUID" that takes
+		the place of the old _POSIX_SAVED_IDS -- it turns out
+		that the POSIX interface is broken enough to break
+		some systems badly.  This includes some fixes for
+		HP-UX.  Also fixes problems where the real uid is
+		not reset properly on startup (from Neil Rickert).
+	Fix a problem that caused timed out messages to not report the
+		addresses that timed out.  Error messages are also more
+		"user friendly".
+	Drop required bandwidth on connections from 64 bytes/sec to
+		16 bytes/sec.
+	Further Solaris portability changes -- doesn't require the BSD
+		compatibility library.  This also adds a new
+		"HASGETDTABLESIZE" compile flag which can be used if
+		you want to use getdtablesize(2) instead of sysconf(2).
+		These are loosely based on changes from David Meyer at
+		University of Oregon.  This now seems to work, at least
+		for quick test cases.
+	Fix a problem that can cause duplicate error messages to be
+		sent if you are in SMTP, you send to multiple addresses,
+		and at least one of those addresses is good and points
+		to an account that has a .forward file (whew!).
+	Fix a problem causing messages to be discarded if checkcompat()
+		returned EX_TEMPFAIL (because it didn't properly mark
+		the "to" address).  Problem noted by John Myers.
+	Fix dfopen to return NULL if the open failed; I was depending
+		on fdopen(-1) returning NULL, which isn't the case.  This
+		isn't serious, but does result in wierd error diagnoses.
+		From Michael Corrigan.
+	CONFIG: add UUCP_MAX_SIZE M4 macro to set the maximum size of
+		messages sent through UUCP-family mailers.  Suggested
+		by Bill Wisner of The Well.
+	CONFIG: if both MAILER(uucp) and MAILER(smtp) are specified,
+		include a "uucp-dom" mailer that uses domain-style
+		addressing.  Suggested by Bill Wisner.
+	CONFIG: Add LOCAL_SHELL_FLAGS and LOCAL_SHELL_ARGS to match
+		LOCAL_MAILER_FLAGS and LOCAL_MAILER_ARGS.  Suggested by
+		Christophe Wolfhugel.
+	CONFIG: Add OSTYPE(aix3).  From Christophe Wolfhugel.
+
+8.2/8.2		93/07/11
+	Don't drop out on config file parse errors in -bt mode.
+	On older configuration files, assume option "l" (use Errors-To
+		header) for back compatibility.  NOTE:  this DOES NOT
+		imply an endorsement of the Errors-To: header in any way.
+	Accept -x flag on AIX-3 as well as OSF/1.  Why, why, why???
+	Don't log errors on EHLO -- it isn't a "real" error for an old
+		SMTP server to give an error on this command, and
+		logging it in the transcript can be confusing.  Fix
+		from Bill Wisner.
+	IRIX compatibility changes provided by Dan Rich
+		<drich@sandman.lerc.nasa.gov>.
+	Solaris 2 compatibility changes.  Provided by Bob Cunningham
+		<bob@kahala.soest.hawaii.edu>, John Oleynick
+		<juo@klinzhai.rutgers.edu>
+	Debugging: -d17 was overloaded (hostsignature and usersmtp.c);
+		move usersmtp (smtpinit and smtpmailfrom) to -d18 to
+		match the other flags in that file.
+	Flush transcript before fork in mailfile().  From Eric Wassenaar.
+	Save h_errno in mci struct and improve error message display.
+		Changes from Eric Wassenaar.
+	Open /dev/null for the transcript if the create of the xf file
+		failed; this avoids at least one possible null pointer
+		reference in very wierd cases.  From Eric Wassenaar.
+	Clean up statistics gathering; it was over-reporting because of
+		forks.  From Eric Wassenaar.
+	Fix problem that causes old Return-Path: line to override new
+		Return-Path: line (conf.c needs H_FORCE to avoid
+		re-using old value).  From Motonori Nakamura.
+	Fix broken -m flag in K definition -- even if -m (match only)
+		was specified, it would still replace the key with the
+		value.  Noted by Rick McCarty of Texas Instruments.
+	If the name server timed out over several days, no "timed out"
+		message would ever be sent back.  The timeout code
+		has been moved from markfailure() to dropenvelope()
+		so that all such failures should be diagnosted.  Pointed
+		out by Christophe Wolfhugel and others.
+	Relax safefile() constraints: directories in an include or
+		forward path must be readable by self if the controlling
+		user owns the entry, readable by all otherwise (e.g.,
+		when reading your .forward file, you have to own and
+		have X permssion in it; everyone needs X permission in
+		the root and directories leading up to your home);
+		include files must be readable by anyone, but need not
+		be owned by you.
+	If _POSIX_SAVED_IDS is defined, setuid to the owner before
+		reading a .forward file; this gets around some problems
+		on NFS mounts if root permission is not exported and
+		the user's home directory isn't x'able.
+	Additional NeXT portability enhancements from Axel Zinser.
+	Additional HP-UX portability enhancements from Brian Bullen.
+	Add a timeout around SMTP message writes; this assumes you can
+		get throughput of at least 64 bytes/second.  Note that
+		this does not impact the "datafinal" default, which
+		is separate; this is just intended to work around
+		network clogs that will occur before the final dot
+		is sent.  From Eric Wassenaar.
+	Change map code to set the "include null" flag adaptively --
+		it initially tries both, but if it finds anything
+		matching without a null it never tries again with a
+		null and vice versa.  If -N is specified, it never
+		tries without the null and creates new maps with a
+		null byte.  If -O is specified, it never tries with
+		the null (for efficiency).  If -N and -O are specified,
+		you get -NO (get it?) lookup at all, so this would
+		be a bad idea.  If you don't specify either -N or -O,
+		it adapts.
+	Fix recognition of "same from address" so that MH submissions
+		will insert the appropriate full name information;
+		this used to work and got broken somewhere along the
+		way.
+	Some changes to eliminate some unnecessary SYSERRs in the
+		log.  For example, if you lost a connection, don't
+		bother reporting that fact on the connection you lost.
+	Add some "extended debugging" flags to try to track down
+		why we get occassional problems with file descriptor
+		one being closed when execing a mailer; it seems to
+		only happen when there has been another error in the
+		same transaction.  This requires XDEBUG, defined
+		by default in conf.h.
+	Add "-X filename" command line flag, which logs both sides of
+		all SMTP transactions.  This is intended ONLY for
+		debugging bad implementations of other mailers; start
+		it up, send a message from a mailer that is failing,
+		and then kill it off and examine the indicated log.
+		This output is not intended to be particularly human
+		readable.  This also adds the HASSETVBUF compile
+		flag, defaulted on if your compiler defines __STDC__.
+	CONFIG: change SMART_HOST to override an SMTP mailer.  If you
+		have a local net that should get direct connects, you
+		will need to use LOCAL_NET_CONFIG to catch these hosts.
+		See cf/README for an example.
+	CONFIG: add LOCAL_MAILER_ARGS (default: `mail -d $u') to handle
+		sites that don't use the -d flag.
+	CONFIG: hide recipient addresses as well as sender addresses
+		behind $M if FEATURE(allmasquerade) is specified; this
+		has been requested by several people, but can break
+		local aliases.  For example, if you mail to "localalias"
+		this will be rewritten as "localalias@masqueradehost";
+		although initial delivery will work, replies will be
+		broken.  Use it sparingly.
+	CONFIG: add FEATURE(domaintable).  This maps unqualified domains
+		to qualified domains in headers.  I believe this is
+		largely equivalent to the IDA feature of the same name.
+	CONFIG: use $U as UUCP name instead of $k.  This permits you
+		to override the "system name" as your UUCP name --
+		in particular, to use domain-ized UUCP names.  From
+		Bill Wisner of The Well.
+	CONFIG: create new mailer "esmtp" that always tries EHLO
+		first.  This is currently unused in the config files,
+		but could be used in a mailertable entry.
+
+8.1C/8.1B	93/06/27
+	Serious security bug fix: it was possible to read any file on
+		the system, regardless of ownership and permissions.
+	If a subroutine returns a fully qualified address, return it
+		immediately instead of feeding it back into rewriting.
+		This fixes a problem with mailertable lookups.
+	CONFIG: fix some M4 frotz (concat => CONCAT)
+
+8.1B/8.1A	93/06/12
+	Serious bug fix: pattern matching backup algorithm stepped by
+		two tokens in classes instead of one.  Found by Claus
+		Assmann at University of Kiel, Germany.
+
+8.1A/8.1A	93/06/08
+	Another mailertable fix....
+
+8.1/8.1		93/06/07
+	4.4BSD freeze.  No semantic changes.
+
+6.65/6.34	93/06/06
+	Fix some lintish problems.
+	Fix some cases where server SMTP behaved poorly when handed bogus
+		input, pointed out by Eric Wassenaar.
+	CONFIG: fix some more (sigh) mailertable bugs -- thanks to
+		Motonori Nakamura of Kyoto University (again).
+
+6.64/6.33	93/06/05
+	Don't send 050 (-v) information after the 250 response to a QUIT
+		command in srvrsmtp -- clients usually close the connection
+		at this point, and it causes bogus error messages.
+	Don't send messages that have errors on input (such as unbalanced
+		parentheses) during SMTP transactions, since a return
+		message has (probably) already been sent.
+	Give better diagnostics on timeouts during network reads, including
+		information similar to the SMTP phase.
+	Fix bug that caused SMTP messages to deliver synchronously; this
+		happened after the DATA 250, and hence caused reading the
+		next command to be delayed.
+	Ignore Errors-To: header unless 'l' (lower case el) header is
+		specified.  The Errors-To: header violates RFC 1123.
+		Errors-To: was only needed to take the place of the
+		envelope sender in the days when most Unix mailers
+		didn't understand about the two kinds of senders.
+	Don't send warning messages in response to automatically generated
+		messages (that is, those From:<>).
+	CONFIG: fix some rather stupid typos in the mailertable code
+		pointed out by Motonori Nakamura of Kyoto University.
+	CONFIG: add confUSE_ERRORS_TO configuration option.
+	CONFIG: if ALWAYS_ADD_DOMAIN is selected, try to use $M
+		(masquerade name) instead of $j.
+	CONFIG: don't add dots to relay names (added in 6.29); it breaks
+		several things, and can be simulated by dot terminating
+		the names of relays.  For example, use:
+			DBbit.net.relay.
+		(note the trailing dot).
+
+6.63/6.32	93/06/01
+	Fix prototypes to eliminate chars in argument lists -- some
+		compilers are pissy about this.
+	Log protocol ($r) and body type if set so we can determine if
+		the adaptive algorithms are working.
+	Pessimize on locking of database files (particularly for NEWDB
+		databases) during opens.  There were problems with
+		processes opening the file while it was rebuilt; since
+		NEWDB caches heavily, the reader opened an empty file,
+		which is an error.  If your system has the ability to
+		lock atomically on open, this works properly; otherwise,
+		there are race conditions.
+	Check mod time on .pag file instead of .dir in NDBM aliases
+		because the .dir file doesn't get updated for small
+		alias files.  From John Gardiner Myers of CMU.
+	More Solaris portability -- it now compiles on Solaris, but
+		hangs up in gethostbyname().
+	Move setting of RES_DEBUG flag before first myhostname() call
+		so we can see name server traffic on that call.
+	Fsync() queue files.
+	Fix a problem that causes -bi to try to rebuild maps other than
+		the alias file(s).
+	Fix a problem that caused udb to reject entries from any but
+		the first database listed.
+	Rearrange doc subdirectory for 4.4BSD release tape.
+	CONFIG: put $r into the Received line.  This was an oversight.
+	CONFIG: fix typo (call to ruleset 99 should have been rulset 90).
+	CONFIG: move "auxiliary" subroutines to be in ruleset 90-99
+		range -- in the long run, single digit rulesets may
+		become reserved for builtin use by sendmail.
+	CONFIG: fix major problem that causes host aliases (that is,
+		anything in $=w != $j) to not be recognized.  This has
+		been around since 6.30.
+
+6.62/6.31	93/05/28
+	BETA RELEASE
+	Fix recursive syserr (if there is an error printing a syserr
+		message).  This makes the code much less eager to consider
+		a write error as serious.  This also includes some
+		heuristics to be clever about closed connections.
+	Lock NEWDB files during gets.  This requires version 1.5 or later
+		of the db library.  If you have an older version, you
+		can use -DOLD_NEWDB.  This will go away in a few weeks.
+	Fix problem causing aliases that use host maps to get overwritten.
+	Do appropriate byte swapping on port numbers in ident protocol
+		code.  Fix from Allan Johannesen of WPI.
+	Defer opening of map files to the same time as alias files so that
+		the daemon will tend to pick up new versions more promptly.
+	Prototype a bunch more functions.
+	Some Solaris 2.1 changes (still doesn't link though).
+	Try to simplify Makefiles by including more subordinate #defines
+		in conf.h (based on OS type).
+	CONFIG: check for domains if FEATURE(mailertable) is defined.
+		For example, if the host name is "knecht.cs.berkeley.edu"
+		it will search the following mailertable keys:
+			knecht.cs.berkeley.edu
+			.cs.berkeley.edu
+			.berkeley.edu
+			.edu
+		This could be used to replace the special relays for bitnet
+		and similar nets.
+
+6.61/6.30	93/05/24
+	Fix problem that prevented appending dots on canonified host
+		names.  This breaks tons of config files -- very
+		important fix.
+	Fix improper pointer dereference in response to HELO command.
+	Fix core dump if debugging set in map_rewrite.
+	CONFIG: add FEATURE(always_add_domain) to always attach the
+		local domain (only impacts local mail).
+	CONFIG: try to avoid turning names into $j -- although
+		technically a host can only have one "canonical name",
+		it seems to be common practice to have several.
+
+6.60/6.29	93/05/22
+	Major change: merge alias databases with maps.  This expands and
+		changes the map class interface but fixes a bunch of bugs.
+		The important user-visible change is that the file name
+		in a K line now does not include the ".db" extension; this
+		is added automatically.  Also, the -d (NIS domain) flag is
+		missing from the K config line; use @domain instead.
+		When compiling, the *_MAP names are gone -- just compile
+		in NDBM, NEWDB, and/or NIS support.
+	Announce mailer/host/user triple on -bv flag -- from Brian
+		Bullen of Stirling University.
+	Don't send more than one line in response to HELO -- it confuses
+		Pony Express, which then behaves very badly.  However,
+		this change does send two line 220 greetings, with the
+		second line reading "ESMTP spoken here".  The usersmtp
+		module recognizes this and goes into ESMTP mode regardless
+		of the setting of the "a" mailer flag.  Thus, "a" means
+		"always try EHLO".
+	AIX portability changes (thanks to Christophe Wolfhugel of
+		Herve Schauer Consultants (Paris) for providing me with
+		an INSA account for this purpose).  Lightly tested.  Use
+		-D_AIX3.  This probably breaks compatibility with some
+		older systems (e.g., 4.2bsd) but still works on SunOS
+		4.1.2, Ultrix 4.2A, HP-UX 8.07, OSF/1 T1.3, and AIX 3.2.3.
+	Fix a problem causing an error message loop if the output channel
+		is hosed.
+	Add the Makefiles that I use for various environments -- some are
+		Berkeley make versions and some are old make versions.
+		My makefile for the NeXT box has gotten lost, alas!
+	PRALIASES: support for printing NEWDB databases.  From
+		Michael J. Corrigan of U.C. San Diego.
+	CONFIG: don't pass pseudo-domains to $[ ... $] (if you have
+		a wildcard MX it can have wierd results).  From
+		Christophe Wolfhugel.
+	CONFIG: dot terminate relay hostnames in S0.  From Christophe
+		Wolfhugel.
+
+6.59/6.28	93/05/13
+	Log version with SMTP daemon startup message.
+	Adjust setproctitle to work on NetBSD and BSD/386.
+	Fix null pointer reference in MX fallback code.
+	A bunch of minor fixes from Eric Wassenaar:
+		If deliver cannot execv the mailer, return EX_OSERR
+			instead of EX_TEMPFAIL (to give better
+			error messages).
+		Consistently malloc e_message.
+		Catch degenerate case of calling returntosender()
+			with an empty returnq.
+		MIME reformatting.
+
+6.58/6.28	93/05/13
+	Fix bug that can cause incorrect verbose display of user smtp
+		messages.
+	Disable SMTP VERB command if PRIV_NOEXPN is set (since this
+		could reveal the same information.
+	Allow failure when reading SMTP greeting message to go on to
+		next MX host.
+	Add "MIME-Version: 1.0" header if using MIME (this was NOT
+		included in RFC 1344, but Bill King of Allan-Bradley
+		Company forwarded me email from Nathaniel Borenstein
+		claiming that it was an inadvertent omission).
+	Don't use Content-Type: X-message-header.  According to John
+		Myers of CMU, many MIME readers will completely ignore
+		the data if they don't recognize it.  Instead, just
+		add a blank line to make it a legal (empty) message.
+	Fix problem causing dots to keep getting appended to cached
+		hostnames.  This can cause buffer overrun conditions.
+		The problem was found by Erik Forsberg of Retix,
+		although I used a different bug fix than he provided.
+	Fix parsing of split header/envelope rewriting specs -- from
+		Eric Forsberg.
+	Fix from Eric Wassenaar to correct To: lists in error messages.
+
+6.57/6.28	93/05/11
+	Fix minor glitch causing extra ctladdrs to be output to queue
+		file.  Just an annoyance.
+	Cache results of name server canonification lookups to avoid
+		backed up queue runs.
+	Major rewrite of alias.c: considerable cleanup, plus sample
+		(untested) support for NIS aliases.  The "A" option
+		can now be a comma separated list (or be repeated) --
+		that is, you can have multiple alias databases.  Each
+		database can have the syntax ``class:file''; if no class
+		is specified, the "implicit" class is assumed.  Implicit
+		searches through a list of compiled in types -- hash,
+		dbm, nis, and stab.  Alias files are searched in the
+		order they are listed.  For example:
+			OAhash:/etc/aliases.local,/etc/aliases
+			OAnis:mail.aliases@my.nis.domain
+		first searches the hash database /etc/aliases.local,
+		then the regular /etc/aliases database, then the NIS
+		map "mail.aliases" in the NIS domain "my.nis.domain".
+	If in Verbose mode (probably from VERB command) run SMTP job
+		in foreground and don't do RCPT optimizations.
+	Add udb :mailsender as equivalent to owner- for regular aliases.
+	Delete option 8; add option 7 that means the opposite.  That is,
+		default to 8-bit mode; a special option is needed to
+		force sendmail into 7 bit mode.
+	Send error messages in encapsulated MIME format.
+	New compile flag "NIS" that turns on NIS alias and NIS map
+		support.
+	Add "j" option to send error messages in MIME (RFC 1341)
+		encapsulated message format per RFC 1344.  The
+		syntax is pretty ugly if you don't have MIME-aware
+		user agents.
+	Clean up message handling (for display in mailq output).
+	New setproctitle implementation for 4.4bsd.
+	Create files (such as ~/dead.letter) using mode FileMode (the
+		F option value) instead of 0666.
+	Fix bug causing output of EXPN command to not be fully qualified.
+		This may cause some problems with UUCP addresses that
+		will require some config file assistance -- specifically,
+		the $: part has to include the host name for this output
+		to make sense.
+	Fix a problem that sometimes diagnosed errors and still sent the
+		message if the header syntax was bad.
+	Fix a bug that caused an error message to be emailed when sendmail
+		was operating in -bv mode.
+	Add "ListenQueueSize" keyword to daemon options option (OO) to
+		set the queue size parameter passed to listen().  You
+		will normally have to tweak your kernel to up this.
+	Strip spaces off of beginning of message-id before logging (in
+		case it was folded across lines).
+	Tweak compile flags in daemon.c -- there were some cases where
+		it wouldn't work without NETINET.
+	Change *file* mailer to output all the usual default headers
+		(From, Date, Message-Id).  It gets used when sending
+		back error messages.
+	CONFIG: explicitly catch and diagnose list:; syntax in ruleset
+		zero -- this is not a valid recipient syntax according
+		to RFC 821.
+	CONFIG: add confMIME_FORMAT_ERRORS to send error messages in
+		MIME format.  Defaults to on.
+	CONFIG: add SMTP_MAILER_FLAGS and UUCP_MAILER_FLAGS to augment
+		the flags for those mailers.
+
+6.56/6.27	93/05/01
+	Fix problem that causes the fallback mail to postmaster
+		(case ESM_POSTMASTER in savemail()) to not look at
+		aliases (ugh).
+	Some more HPUX tweaking (compile flag hpux => __hpux so it
+		still works in ANSI mode).
+	Don't try to flock non-regular files when mailing to a file.
+		In particular, this was a problem if you tried to
+		send to /dev/null.
+	Fix a wierd bug that can cause senders to be queued as
+		recipients if the name server is down when the mail
+		is initially sent.  This hack just ignores sender
+		deletion (essentially, it sets the MeToo flag) if there
+		is a TEMPFAIL during processing of the sender address.
+		Obscure.
+	Fix a dangling else problem -- from Brian Bullen from University
+		of Stirling, UK.
+	Add the "b" mailer flag to force a blank line on the end of
+		messages.  Some brilliant versions of /bin/mail insist
+		on this but do not add it themselves.
+	Add the "g" mailer flag to prevent user SMTP from sending
+		"MAIL From:<>".  This is only intended to be a
+		transitional gesture, and should not be used if at
+		all possible.  It appears that Berkeley and IDA
+		config files have always handled this properly; the
+		UK config kit apparently does not.
+	Don't lowercase and then capitalize header field names -- leave
+		them with original capitalization.  Fixes from Bill
+		King of Allen-Bradley Company.
+	Further cleanup and improved reporting of error messages,
+		particularly conditions that cause messages to be
+		requeued for future delivery.
+	Tweak syslog priorities in some cases.
+	CONFIG: clean up route-addr on UUCP addresses.
+
+6.55/6.25	93/04/27
+	HPUX 8.07 compatibility changes in getla() -- I had to make
+		these changes to get it to work at Berkeley, although
+		others seem to have been working before (???).
+	Various patches to XLA code.
+	Fix problem that causes setuid bit on files to be ignored from
+		SMTP or in queue runs.  Problem noted by Jason Ornstein
+		of Under The Wire, Inc.
+	Fix problem that can cause CNAMEs to be ignored.
+	Generalize getmxrr to match local host in $=w instead of a
+		single name passed in.
+	Some cleanup from Eric Wassenaar:
+		Use FileMailer instead of ProgMailer in two places.
+		Eliminate duplicate 8th-bit stripping in commaize.
+		Fix a problem with mis-parsing of backslash escapes
+			under some circumstances.
+	NIS map fix (was always including trailing null character)
+		from Mike Glendinning of Ingres UK.
+	Add "a" mailer flag to try using ESMTP.  It tries the EHLO
+		command and if that fails falls back to regular SMTP.
+		Also parses EHLO option keywords.  If host supports
+		SIZE extension, this is added to the MAIL FROM:
+		command.
+	Extend "b" option to include a second value which is the
+		maximum message size this server is willing to accept.
+		For example, a value of "10/1000000" says that there
+		must be ten blocks free, and sendmail will reject
+		any message larger than one megabyte.
+	Some portability hooks for NeXT (this could be applicable
+		to Mach in general).  You have to create an empty
+		file called "unistd.h" to get it to compile.
+	Adjust config values (MAXLINE, MAXATOM, and PSBUFSIZE) to
+		be more generous.
+	Add X400-Received: to the list of headers tagged with H_TRACE
+		in conf.c.  From Bill King, Allen-Bradley Co.
+
+6.54/6.25	93/04/19
+	Fix problem that caused redefinition of SMTP and QUEUE compile
+		flags.  Pointed out by Jon Forrest of the Sequoia 2000
+		project at Berkeley.
+	Properly handle \! hack -- it was treating host\!user as one
+		token (host!user) instead of three (host, !, user).
+		Fix from Eric Wassenaar of NIKHEF-H.
+	Fix compilation problem in getauthinfo() if IDENTPROTO is off.
+	Turn off DEFNAMES and DNSRCH when getting the hostsignature
+		(i.e., MX records) in level 1 configuration files; this
+		matches the old behaviour.  From Motonori Nakamura of
+		Kyoto University.
+	Improve error message printing -- if sent through an alias,
+		error messages include the name of the alias in the
+		message.  Unfortunately, in order to make this work
+		properly in queue runs, this changes the format of the
+		C line in the qf file.  The relatively uselessness of
+		the previous information was pointed out to me by
+		Allan E Johannesen of WPI.
+	Add XLA compile flag to add hooks to Christophe Wolfhugel's
+		extended load average code.  This is still in very early
+		form.  For information regarding the guts of the xla
+		code, contact Christophe.Wolfhugel@grasp.insa-lyon.fr.
+	Additional hooks for detecting tempfails in rewriting rules
+		(that is, in map lookups).
+
+6.53/6.25	93/04/15
+	Properly diagnose ruleset zero returning null (instead of a mailer
+		triple).  From Motonori Nakamura of Kyoto University.
+	More generalization of socket code for other protocols.
+	Shorten timeouts on reverse name lookups -- since they are done
+		during connection establishment, long timeouts here can
+		cause higher level timeouts.  This mainly serves to accept
+		mail from hosts that do not have proper reverse (PTR) DNS
+		records set up.
+	Reset e_statmsg before each mailer invocation to avoid bogus
+		messages in the log.
+	Redefine $r, $s, and $_ in error envelopes so you don't get
+		incorrect cruft in the error message.  Problem noted by
+		Motonori Nakamura of Kyoto University.
+	Fix a problem that can cause failure to return errors to Postmaster
+		in certain cases.  From Motonori Nakamura.
+	Fix a problem that can cause some systems to give duplicate error
+		messages when a bad syntax address such as "<a" is presented
+		to an SMTP server.   It doesn't seem to occur on all
+		machines.  From Motonori Nakamura.
+	Default IDENTPROTO off for Ultrix and HPUX, which apparently have
+		the interesting "feature" that when they receive a "Host
+		unreachable" message they closes all open connections to
+		that host.  However, some firewall gateways send this message
+		if you try to connect to an unauthorized port, such as the
+		IDENT port (113).  Thus, no email can be received from such
+		hosts.  There is some evidence that versions of Ultrix before
+		4.3 do not have this problem.  Thanks to Tom Ivar Helbekkmo
+		for pointing out this behaviour to me and to Michael Corrigan
+		of U.C. San Diego for informing me about the HPUX problem.
+	Allow IPC mailers to return a colon-separated list of hosts in the
+		$@ clause; these are searched in order as though they were
+		MX records.
+	When sending an error report, print the list of addresses tagged
+		as bad.  Requested by Allan E Johannesen of WPI.
+	Change map function calls to return a status code.  This gets
+		passed back as the result of rewrite.  Parseaddr marks
+		the address as a QUEUEUP address if the return code is
+		EX_TEMPFAIL.  All this to queue properly if the name
+		server is down.  This code is not well tested.  This code
+		changes the interface to map lookup functions (a fifth
+		parameter, int *statp, is added).  Feature requested by
+		Dan Oscarsson.
+	Don't delete quotes (in the dequote map) if there are spaces in
+		the string, since this would cause them to be replaced by
+		the SpaceSub character.
+	Accept BODY=8BITMIME on SMTP MAIL command.  This isn't advertised
+		because the 8BIT to 7BIT translation doesn't exist yet.
+		This does add a "bodytype" field to both envelope and
+		queue file and a -B command line flag to pass the type in
+		during direct invocations.
+	Discard return error messages only on responses to responses to
+		responses, not on responses to responses.  That is, the
+		algorithm is to try return to sender, then return to
+		postmaster, then discard.  Previously it discarded
+		immediately if the return to sender pass failed.
+	CONFIG: back out change to hide unqualified hostnames behind %-hack.
+		This screws up local aliases and .forward files.
+	CONFIG: add FEATURE(nocanonify) to turn off calls to $[ ... $];
+		some sites only handle completely canonified names.
+		Requested by John Gardiner Myers of CMU.
+	CONFIG: some UUCP code was still included even if FEATURE(nouucp)
+		was specified.
+
+6.52/6.24	93/04/10
+	Clean up some minor glitches on error return messages pointed out
+		by Motonori Nakamura of Kyoto University.
+	Fix reply() to not reset SmtpReplyBuffer on fatal errors; this
+		was supposed to reset SmtpMsg Buffer.  This makes the
+		client side code virtually useless.  Reported by Allan
+		E Johannesen of WPI and Phil Brandenberger of Swarthmore.
+	Better debug messages if fuzzy is disabled, suggested by Allan
+		E Johannesen of WPI.
+	Offset SmtpReplyBuffer by four in usersmtp when checking for
+		loopback.  From Eric Wassenaar.
+	Don't set $s until after runinchild in srvrsmtp -- otherwise
+		it gets cleared.  From Eric Wassenaar.
+	Implement IDA-style $&x for deferred macro expansion.
+	More POSIX compatibility.
+	CONFIG: Hide unqualified hostnames behind %-hack using $s as the
+		actual sender.  This is only done if $r is non-null, that
+		is, if this is not locally submitted mail.
+	CONFIG: Add FEATURE(bitdomain) allowing mapping of BITNET host
+		names to internet domains.  A program contributed by
+		John Gardiner Myers of CMU to create the maps is included
+		in the contrib directory (in the "misc" tar file).
+	CONFIG: Add FEATURE(uucpdomain) for a similar mapping for UUCP
+		hosts.  There is currently no tool to create this map.
+
+6.51/6.23	93/04/04
+	Add D= mailer flag to specify a path of possible working directories
+		in which to execute the mailer.  This is intended for the
+		prog mailer; some shells can get upset if they don't have
+		access to the current directory.
+	Add RFC 1413 (IDENT) protocol support.  This is only very loosely
+		tested.  This adds a $_ macro to be the authenticated
+		info (in ``user@domain [address]'' form) and debug flag
+		9 to trace the protocol.
+	Check for loopbacks in usersmtp instead of srvrsmtp -- there is no
+		reason for a local agent to not be talking to the localhost
+		(although the inverse is not true).
+	Add a few hooks for automated map rebuilding.  This is certainly
+		not done yet.
+	CONFIG: Have prog mailer specify a path of ``D=$z:/'' -- that is,
+		user's home directory then the root.
+	CONFIG: Log RFC 1413 identification in Received: line.
+
+6.50/6.22	93/04/01
+	Fixes to requeueing code to make it compute priority, nrcpts,
+		and the like properly.
+
+6.49/6.22	93/04/01
+	Diagnose incorrect privacy flags.  Suggested by Bryan Costales
+		of ICSI.
+	Some ANSI C fixes.
+	Arrange to quote backslashes as well as other special characters
+		in the phrase part of a route-addr.
+	Some fixes to FallBackMX code suggested by Motonori Nakamura of
+		Kyoto University.
+	More vigorous zeroing of CurHostAddr to avoid logging of bogus
+		host addresses when you are actually just printing
+		information from the MCI structure; problem noted by
+		Michael Corrigan of U.C. San Diego.
+	Don't ignore rest of queue if any job is not runnable.  This can
+		also cause an incorrect job to be lost.  Fix from
+		Eric Wassenaar.
+	Always respond "quickly" to RCPT command; do alias expansion and
+		the like later.  This also means that mail for lists that
+		have errors will be acccepted, and an error sent back
+		later.  This is done by instantiating the queue file
+		and then immediately running and requeueing it.
+
+6.48/6.22	93/03/30
+	Fix incorrect diagnosis of infinite loop in ruleset.  Problem noted
+		by several people.
+	Improve information printed when infinite loops are discovered.
+	Zero CurHostAddr to fix erroneous internet addresses in log when no
+		addresses can be bound.  Pointed out by Motonori Nakamura
+		of Kyoto University.
+	"Probe" SMTP connections using RSET instead of NOOP "just in case".
+		Suggested by John Gardiner Myers of CMU.
+	Don't warn about -f if you are setting sender to yourself.
+
+6.47/6.22	93/03/29
+	Fix incompatible call to endmailer in smtpquit which causes core
+		dumps.  Noted by Allan E Johannesen of WPI.
+	HPUX portability changes from Michael J. Corrigan of UC San Diego.
+	Require MAIL before RCPT command in srvrsmtp.c.  This had been
+		intentional from the 821 draft days when the order wasn't
+		clear, but is silly now.
+	Fix bug in nis_magic routine that was initializing parameters
+		incorrectly.  Fix from Takahiro Kanbe of Fuji Xerox
+		Information Systems Co., Ltd.
+	Change default for PrivacyFlags in conf.c to 0 -- since it always
+		"or"s in new values, there was no way to turn off the
+		AuthWarning stuff.
+	Add O option to set SMTP daemon options.
+	Add V option to set fallback MX host.  This always sorts at lower
+		priority than anything it gets from the name server.  It
+		should only be used for environments with very bad network
+		connectivity.  Requested by several people.
+	Log sending info.  It's not clear this is a good idea.
+	CONFIG: fix typo in mailertable code.  Noted by Phil Brandenberger
+		of Swarthmore.
+	CONFIG: add confDAEMON_OPTIONS and confFALLBACK_MX to set options
+		O and V, respectively.
+
+6.46/6.21	93/03/26
+	Fix botch in server SMTP that broke transactions that did not
+		use HELO first (like MH).  Fix from Michael Corrigan
+		of U.C. San Diego.
+	Fall back to other MX records if there is an error anywhere
+		in delivery (actually on MAIL or DATA -- RCPT is harder).
+		Suggested by John Gardiner Myers and Motonori Nakamura.
+	Revert to non-prototypes -- it turns out that our ANSI C
+		compiler is more forgiving than most others about
+		mixing prototyped extern declarations with non-prototyped
+		function definitions.
+	Fix a problem with multi-word class matching pointed out by
+		Neil Rickert.  Given:
+			CX b a.b.c
+			R$+ $=X $+	$: $1 < $2 > $3
+		the input "user@a.b.c" failed instead of being properly
+		rewritten as "user@a.<b>.c".
+	Neil also convinced me that it was correct that $~ should match
+		only one token -- the problem is that it's always possible
+		to add another token, so $~ matches far too eagerly.
+
+6.45/6.21	93/03/25
+	Implement multi-word classes (properly!).
+
+6.44/6.21	93/03/25
+	Add X-Authentication-Warning: headers to clue users into possible
+		attempts to forge mail.  This is on the authwarnings
+		privacy flag, but is the default.  Suggested by Bryan
+		Costales of ICSI.
+	Pass default units for convtime in so they can be more reasonable.
+	Allow config files to always add a new Comments: header (i.e.,
+		they will be added even if an old one already exists).
+		Suggested by Bryan Costales of ICSI.
+	Allow config files to delete an existing Return-Path: header.
+		These should only be added at final delivery.  Suggested
+		by Bryan Costales of ICSI.
+	Some debugging additions.  Suggested by Bryan Costales of ICSI.
+	Clean up logging of Family 0 addresses.  Noted by David Muir
+		Sharnoff and others.
+	Add a "dequote" map class.  This allows config files to strip
+		quotes off of addresses.  Note that this is not a builtin
+		map, just a class -- so you have to define the map
+		using the K line.
+	Fix a bug in the queueup() loop getting a locked tf where in
+		very odd cases it can fall off the bottom and core dump.
+		Of course, it was P{r Emanuelsson who found it....
+	Open a new transcript when splitting an envelope.  Problem found
+		by Allan E Johannesen of WPI.
+	Improved error output in endmailer if the mailer core dumps.
+	CONFIG: Fix typo in UUCP mailer definition.
+	CONFIG: Default several of the new options on: eight bit input,
+		privacy flags set to "authwarnings", and message warning
+		set to 4h.
+	CONFIG: Use dequote map.
+
+6.43/6.20	93/03/23
+	Fix problem with assumption of an sa_len field in a generic
+		sockaddr -- it turns out that most vendors haven't
+		picked up this (very important) fix.
+	Change compilation flags for daemon code -- select one or both
+		of NETINET or NETISO, but don't ever set DAEMON manually.
+	CONFIG: add FEATURE(mailertable) to do IDA-style mailertables.
+
+6.42/6.19	93/03/19
+	Use Postmaster as default fallback return address, not root.
+	POSIX changes for file descriptor handling.
+	Diagnose errors writing new queue file.
+	If you change the owner using an owner- alias, also change the
+		error mode to EM_MAIL so that errors don't get dropped
+		into an inappropriate directory.  Problem noted by
+		Allan E Johannesen of WPI.
+	If you are su'ed to root, send email as who you really are, not
+		as root.  From Brian Kantor of U.C. San Diego.
+	Allow warning messages to be sent after a configurable interval
+		has passed without delivery.  The message is sent only
+		once per envelope.  This changes the format of the qf
+		file to have an F line, and the format of the T option
+		to accept take the format "return/warn" (both intervals).
+	Don't force all local names to lower case -- this was left over
+		from the wierd handling of case mapping on aliases.  It
+		is now driven (as expected) by the "u" mailer flag.
+		Problem noted by P{r Emanuelsson.
+	Fix problem that caused headers on returned email to be trashed;
+		they were getting freed, but are still accessible via
+		BlankEnvelope.
+	Fix problem that caused bogus ids to be created on returned
+		mail.
+	Add support for ISO and other non-INET networking.  This is by
+		no means finished yet.  This does assume a lot of other
+		system support, like a version of gethostbyname that
+		returns non-AF_INET addresses.
+	CONFIG: change default on prog mailer to keep upper case in
+		user names (i.e., in the program command line).
+	CONFIG: strip trailing dots off of hosts in uucp mailer before
+		convert to bang format.
+	CONFIG: create new "relay" mailer for $R (LOCAL_RELAY) and $H
+		(MAIL_HUB) delivery that doesn't add local domain.  Note
+		that this violates 821, but is probably "more correct"
+		for what we are trying to do.  Problem pointed out by
+		Michael Graff of Iowa State.
+
+6.41/6.18	93/03/18
+	Clean up unnecessary creates of queue ids (i.e., empty qf files)
+		when not needed, such as when starting up an SMTP
+		connection.
+	Fix problem where split envelopes aren't instantiated in the queue.
+		This is quite a serious bug.
+	Owner- aliases had problems with leading spaces causing a
+		premature delimitation.
+
+6.40/6.18	93/03/18
+	Have ending 250 (after DATA) include the id; suggested by
+		Brian Kantor of UC San Diego.
+	Add logging on envelope splitting.
+	Change queue ids to have one more letter encoding the hour of
+		the day so that during a single day there is a greater
+		likelihood of uniqueness; requested by Brian Kantor.
+
+6.39/6.18	93/03/18
+	Fix minor compile problem if LOCKF is defined.
+	Define size of tobuf in conf.h.  Observed by Toshinari Takahashi
+		of Toshiba.
+	Restore e_sender -- this is equivalent to e_from.q_paddr without
+		decorations such as angle brackets and comments.
+	OSF/1 on Alpha changes from Allan E Johannesen of WPI.
+	CONFIG: fix typo in S3 for list syntax (;: => :;).  Thanks to
+		Christopher Hoover for noting the problem.
+
+6.38/6.17	93/03/17
+	Pass envelope to disconnect to avoid another use of CurEnv, which
+		can apparently end up being null at inopportune times.
+	Log "received from" as "relay=" for consistency (suggested by
+		John Gardiner Myers).
+	Fix major bug in header handling:  if no From: line existed in
+		the header (so sendmail inserts one), and the sender is
+		an alias that has an owner, the From: line shows the
+		owner (as well as the envelope).  Fixed by early binding
+		the headers (which will change debugging output).
+	HPUX portability patches from Michael J. Corrigan of UC San Diego.
+	Some attempts to adapt better to out of open file conditions.
+	Some changes to ctladdr handling in queue files.
+
+6.37/6.17	93/03/16
+	MAJOR CHANGE:  delete e_sender and e_returnpath (why are these
+		different from e_from?) and $< macro.
+	Log correct IP address in relay= field even if the connection
+		times out.
+	Log "received from [RESPONSE]" on EF_RESPONSE messages (from
+		John Gardiner Myers).
+	Fixes to SysExMsg logging (sometimes just got "message: %s"
+		instead of "message: error message"), noted by Eric
+		Wassenaar.  Also reported by Motonori Nakamura.
+	Improvements to MX piggybacking code, from Motonori Nakamura.
+	Fix case where CurHostName points to an auto variable that has
+		been deallocated (from Motonori Nakamura).
+	Fix bug causing newlines to be included in aliases if option
+		"n" (check alias RHS) is set; bug noted by David Muir
+		Sharnoff.
+	Fix problem causing user names that should be mapped to lower
+		case to not be mapped if they are sent during a queue
+		run.  This greatly simplifies the case mapping code.
+		Problem noted by Allan E Johannesen of WPI.
+	Don't do recipient address rewriting in buildaddr.  This
+		improperly did recipient rewriting on sender addresses,
+		and just seems bogus in general -- but the change could
+		break some .cf files.
+	Pass TZ envariable to child processes for System V.
+	CONFIG: allow LOCAL_RULE_1 and LOCAL_RULE_2 if you want to
+		define those rulesets.
+	KNOWN PROBLEM:  I have seen some problems on SunOS that causes
+		the User Data Base to give errors on some addresses.  I
+		have tracked the problem back at least as far as 93.02.15
+		(version 6.22).  Running with debugging on makes it
+		go away, so I conclude that it is referencing uninitialized
+		stack data.  I haven't been able to track this down yet.
+
+6.36/6.16	93/03/08
+	Allow local mailer to specify $@host -- this lets you assign the
+		"foo" part of jgm+foo to $h for passing in to the local
+		mailer.
+	Additional debug printing in getcanonname (show query type).
+	Don't add the e_fromdomain on sender addresses -- this interacts
+		wierdly with the owner- code.
+	Improve delivery logging to not log obvious or meaningless stuff.
+	Include numeric IP address in Received: lines per RFC 1123 section
+		5.2.8.
+	Fixed a bug in checking stat() return value if restrictmailq is
+		set.  Also, check the entire group set instead of just the
+		primary group.  Both from John Gardiner Myers.
+	Don't have usrerr automatically print errno, since this is often
+		misleading.
+	Use transienterror() in makeconnection after connect() fails and
+		in openmailer after execve() fails (from Eric Wassenaar).
+		Also moved transienterror() from util.c to conf.c.
+	Clean up from= logging on response messages.
+	Undo patch allowing prescan to return a null vector -- it breaks
+		too many things.
+	Config: FEATURE(notsticky) lets you use UDB for everything coming
+		in to the machine, even if it is specifically targetted
+		to this machine.  Without it, UDB is bypassed if the user
+		name is fully qualified.
+	Config: fix another minor botch with <> (local mailer wasn't
+		mapping them properly).
+
+6.35/6.15	93/03/05
+	Fix getrealhostname to return null if sinlen <= 0 -- this can
+		occur if stdin is a pipe.
+	Avoid infinite loop in getcanonname if name server return
+		NO_DATA (for example).
+	Config: avoid having C flag qualify list syntax and error syntax.
+
+6.34/6.14	93/03/05
+	Fix logging in deliver to not pass too many parameters to Ultrix
+		versions of syslog.
+	Don't write the pid file until after the daemon has actually
+		opened and conditioned the connection.
+	Consider addresses "different" if their q_uids differ (so that
+		two users forwarding to the same program will be seen
+		as different, rather than the same).
+	Fix problem with bad parameters in main() -- they set ExitStat
+		but don't exit.
+	Fix null pointer references through RealHostName -- painfully
+		discovered by Allan E Johannesen of WPI.
+	Fix bug causing user@@localhost to core dump (yuch).
+	Config: don't put two @host.dom.ain on users in $=E in SMTP
+		mailer.  Also, catch user@ (no host) in ruleset 0.
+
+6.33/6.13	93/03/03
+	Config: add confCW_FILE as the name of the cw configuration file
+		(defaults to /etc/sendmail.cw).  From P{r Emanuelsson.
+	Allow prescan to return a pointer to an empty list -- this is
+		not an error.  Also, clean up error reporting to avoid
+		double errors (prescan reports once, then the caller
+		reports again).
+	Changes to avoid trusting T_ANY queries -- run them, but if you
+		don't get the info you expected, do T_A and T_MX queries
+		anyhow.  This also fixes an oversight where _res.options
+		bits were being ignored.
+	If PRIV_NOVRFY is set, use 252 response code instead of 502 per
+		RFC 1123 section 5.2.3.  It's not 100% clear that this
+		is correct, but it probably works better with stupid
+		mailers that do a VRFY and only check the first digit.
+
+6.32/6.12	93/03/02
+	Fix uninitialized variable "protocol" in smtp code.
+	Include <unistd.h> in sendmail.h -- move towards POSIX/ANSI.
+	Additional hooks for RFC 1427 (ESMTP SIZE extension).  This
+		includes requiring that enoughspace() know the system
+		block size, which will undoubtedly break most ports.
+	Trace flag 19 in use for srvrsmtp.c.
+	Additional logging -- notably the sending mailer name.  This
+		also changes the delivery logging to strict field=value
+		syntax.
+	Fix some problems with messages getting sent even to addresses
+		that had been marked bad -- from Eric Wassenaar.
+	More WIDE changes: accept host name inside [...] as non-MXed
+		host.  This is intended ONLY for use inside firewalled
+		environments, where the MX points at the gateway.
+	Change .cf file conventions so that mapping for <> addresses
+		don't have an @ in them (to avoid confusing the C mailer
+		flag).  Pointed out by Neil Rickert.
+	Config extensions for Sam Leffler's FlexFAX software.
+
+6.31/6.10	93/02/28
+	Fix some more bugs in alias owner code -- there were some wierd
+		cases where an error in a non-aliased name would override
+		the return info in an aliased name with an owner.
+	Changes from WIDE Project, forwarded to me by Motonori Nakamura:
+		Log actual delivery host (after MX et al); from
+			yasuhiro@dcl.co.jp.
+		Log daemon startup.
+		Deliver Postmaster copies without a body.
+		Better logging of SMTP senders.
+		Send all program email as daemon even when local.
+	As requested in various forms from many people, accept -qIstring
+		to limit queue runs to jobs with queue-id matching string.
+		Similarly for -qRstring for recipients, -qSstring for
+		senders.
+	Initial hooks for ESMTP support (see RFC 1425).
+	Fixed a syntax error in the UUCP mailer specification that caused
+		core dumps on startup.
+	Check for missing A= or P= arguments in mailer definitions.
+
+6.30/6.10	93/02/27
+	Require FROZENCONFIG compilation flag to include frozen
+		configuration code.  Frozen configuration is really
+		not a very good idea any more, particularly in shared
+		library environments.
+	Do better checking of errno after opens of :include: and .forward
+		files to defer delivery on network and other transient
+		errors.  Suggestion from Craig Everhart.
+	Fix minor botch in read timeout macro processing.
+	Add FEATURE(nouucp) to config files for sites that know absolutely
+		nothing about UUCP.
+	Add built cf files to distribution tape and clarify how to build
+		them if you don't have the Berkeley make.
+	Some sizeof(long) portability changes for the Alpha, from Allan
+		E Johannesen.
+	Add "restrictmailq" privacy flag -- if set, only people in the same
+		group as your queue directory can print the queue.  If you
+		set this, be sure you also restrict access to log files....
+	Fix another bug in owner-list stuff that can cause data files to
+		be "lost".
+	Fix a bug with queue runs that cause forwards to yourself to go
+		into alias/forwarding loops.  I'm still iffy about this
+		fix.
+	Fix from Eric Wassenaar for suppression of return message code.
+
+6.29/6.9	93/02/24
+	Fix yet another problem in alias owner code -- put the wrong return
+		address on the enclosed return-to-sender letter.
+
+6.28/6.9	93/02/24
+	Fix botch in alias owner code that caused it to not operate if the
+		error was detected locally.
+
+6.27/6.9	93/02/24
+	M_LOCAL => M_LOCALMAILER to avoid conflict with Ultrix include
+		file <sys/mount.h>.
+	Miscellaneous bug fixes from Eric Wassenaar:
+		sendmail -bv -t logs the from line even though in verify
+			mode only.
+		sendmail -v can go into queue mode if shouldqueue returns
+			TRUE.
+	Add route-addr pruning per RFC 1123 section 5.3.3.  This can be
+		disabled using the "R" option.
+	Delete (always undocumented) -R flag (save original recipients);
+		there are ways to syslog(3) these now.
+	Clean up SMTP reply codes -- specify them as needed in the code,
+		instead of in conf.c -- this was needed during the NCP to
+		TCP transition, but seems silly now.  This also changes
+		parameters to message and nmessage.
+	Have mailstats read the .cf file to find the sendmail.st file and
+		get text versions of mailer names.  An initial version of
+		this code was provided by Tuominen Keijo (although the
+		comments indicate the good bits were written by "E.V.").
+	Add yet more System V compatibility hacks.
+	Fix bug in VRFY code (assumes everything must be a local user).
+	Allow specification of any of the hard-wired pathnames in the
+		Makefile.
+	Delete concept of "trusted users" -- this really didn't provide
+		any security anyway, and caused some problems.
+	Delete last vestige of support for the word "at" as an equivalent
+		to the character "@".
+	Propagate owner-foo alias information into the envelope sender.
+		Based on code from John Gardiner Myers.  This is a major
+		semantic change -- beware!
+	Allow $@ on LHS to indicate "match zero" -- this is used to match
+		the null expression.
+
+6.26/6.8	93/02/21
+	Don't "lose" queue runs.  Very important fix from (who else?)
+		Eric Wassenaar.
+	Completely reset state on RSET command -- from Eric Wassenaar.
+	Send error messages and return receipts using an envelope sender
+		of <> regardless of the setting of $n.  Rewriting rules
+		can undo this if they feel the necessity, as might be
+		needed for networks that don't understand the syntax.
+		This is permitted by RFC 821 section 3.6 and required by
+		RFC 1123 section 5.3.3.  THIS REQUIRES VERSION 4 CONFIG
+		FILES because the rulesets must be able to parse <>
+		properly.
+	Don't ever send error messages to "<>" -- they will get sent to
+		the local postmaster or dumped in /usr/tmp/dead.letter
+		instead.  Per RFC 1123 section 5.3.3.
+	Explicitly check for email to yourself as a dotted quad.  You
+		have to call $[ [ ... ] $] to get this.
+	Up the message timeout to five days per RFC 1123 section 5.3.1.1.
+	Make all read timeouts individually configurable, as strongly
+		recommended by RFC 1123 section 5.3.2.
+	Use f_bavail (blocks available to regular users) instead of f_bfree
+		(blocks available to superuser) in free block checks.
+	Change $d macro to be the current time, not the origination time,
+		since this is consistent with how it is used now.
+	Generalization of enoughspace from Eric Wassenaar covering
+		SGI, Apollo, HPUX, Ultrix, and SunOS.
+	Ignore process group signals -- some front ends can do this if
+		you kill a window too quickly.  From Eric Wassenaar.
+	Change umask to 022.
+
+6.25/6.8	93/02/20
+	Close all cached connections before calling mailers and after
+		forking for delivery (caused double closes which resulted
+		in false errors).
+	Add FEATURE(redirect) in config files -- this allows you to alias
+		old addresses to a pointer to the new address that will
+		give a 551 error message, but not deliver the mail.
+	Some code changes to make the 551 errors look pretty.
+	Names of M4 program paths in config files have changed -- they
+		are all XXX_MAILER_PATH now, to match XXX_MAILER_FLAGS.
+	Fix a bug in the QSELFREF code having to do with empty .forward
+		files, reported by Eric Wassenaar.
+	Add option "p" (privacy flags); this allows you to tune how
+		picky the SMTP server will be.  This also adds the
+		confPRIVACY_FLAGS M4 macro in the config files.
+	Add option "b" (minimum blocks free).  If there are fewer than
+		this number of blocks free on the filesystem containing
+		the queue directory, the SMTP MAIL command will return
+		a 452 response and ask you to try again later.  This
+		also adds the confMIN_FREE_BLOCKS M4 macro in the config
+		files.
+	Made VRFY just verify (doesn't expand aliases and .forward files);
+		EXPN does full expansion.  RCPT in queue-only mode also
+		doesn't chase aliases and .forward.
+
+6.24/6.7	93/02/19
+	Increase the number of domain search entries in domain.c to allow
+		for the extra "" entry indicating the root domain.
+		Reported by Motonori Nakamura of Kyoto U.
+	Add a "SMART_HOST" in the configs for UUCP-connected sites that
+		want to forward all mail with extra "@"s to that site.
+		Also allows SMART_HOST, LOCAL_RELAY, and MAIL_HUB to
+		be specified as ``mailer:hostname'' to use an alternate
+		mailer.
+	Clarified and updated some wording in the Operations Guide.
+	Add the "c" mailer flag -- this suppresses all comment parts of
+		addresses (requested by John Curran of NEARnet).
+	Have -v print prompts in -bt mode even if stdin is not a terminal
+		(default behaviour is to be silent if not reading from
+		a terminal).  Suggested by Bryan Costales, ICSI.
+	Move the metacharacters from C0 space (\001-\037) into C1 space
+		(\201-\237).  This also fixes a bunch of potential bugs
+		with G1 characters (\240-\276) in headers relating to
+		negative numbers passed to isspace() et al.
+	Add YP_LAST_MODIFIED and YP_MASTER_NAME to DBM version of alias
+		database if YPCOMPAT is #defined.  Enhancement from
+		Takahiro Kanbe of Fuji Xerox Information Systems Co., Ltd.
+	Add "list" Precedence (-30); this can be used with old sendmails
+		which will map to precedence 0 (which will return error
+		messages).  Suggested by Stephen R. van den Berg.
+	Many bug fixes from Eric Wassenaar of the National Institute for
+			Nuclear and High-Energy Physics, Amsterdam:
+		Clear timeouts properly on open failures in include().
+		Don't dereference through NULL if no home directory found.
+		Re-establish SIGCHLD signal on System 5 in reapchild().
+		Avoid NULL pointer reference on -pFOO flag.
+		Properly handle backslash escapes in comments.
+		Correctly check reply status on SMTP NOOP command.
+		Properly save SMTP error message if peer gives
+			"Service Shutting Down" message.
+		Avoid writing to the transcript if it couldn't be opened.
+		Signal errors in SMTP children to parent properly.
+	Handle self references in a list more globally (include a
+		QSELFREF bit in the address flags).  This enhancement
+		was suggested by Eric Wassenaar.
+	Use initgroups() in hpux, even though it's System-V based.  The
+		HASINITGROUPS compile flag can set this on other systems.
+		This HPUX behaviour was pointed out by Eric Wassenaar.
+
+6.23/6.6	93/02/16
+	Clean up handling of LogLevel to make it easier to figure out
+		what's on what level.
+	Change log levels to have some consistency:
+		1    serious system failures, security problems
+		2    lost communications, protocol failures
+		3    other serious failures
+		4    minor errors
+		5    message collection
+		6    vrfy logging, creation of return-to-sender
+		7    delivery failures
+		8    delivery successes
+		9    delivery tempfails (queue ups)
+		10   database expansion
+		>64  debugging
+	Allow IDA-style separated processing on S= and R= in Mailer
+		definition lines.  Note that rulesets 1 and 2 are
+		still used for both addresses as before.  Bruce Lilly
+		gave a convincing argument that RFC976 insists on
+		this behaviour.
+	Added some time zones to arpatounix -- they may not be in the
+		standards, but they are in use.  However, I may delete
+		arpatounix entirely -- there appears to be no reason
+		for it to exist.
+	Change to UUCP mailer (in cf directory) to try to do a saner job.
+		I'm still not certain about this mailer in general.
+
+6.22/6.5	93/02/15
+	Fix bug that prevents saving letters in ~/dead.letter.
+	Don't add angle brackets in VRFY command if angle brackets already
+		exist in the address.
+	Fix bogus error message in udbexpand.
+	Null terminate host buffers in buildaddr (broken in 6.21) --
+		IMPORTANT FIX!!
+
+6.21/6.5	93/02/15
+	Fix another incorrect error message in alias.c, found by Azuma
+		Okamoto.
+	Fix a couple of problems in the more-configurable config files,
+		found by Tom Ivar Helbekkmo.
+	Fix problem with quoted :include: entries.
+	Don't duplicate the filename on verbose printing of .forward and
+		:include: contents.
+	Extend size of prescan buffer (to allow bigger addresses).  Also,
+		detect some buffer overflows.
+	Log user SMTP protocol errors (log level 4).
+
+6.20/6.4	93/02/14
+	Fix another problem in the MCI state machine caused when there
+		were errors generated from the other end to commands
+		other than RCPT.
+
+6.19/6.4	93/02/14
+	Include load average support for DEC Alpha running OSF/1.
+	Fix multiple-response problem with errors in MAIL From: line.
+	Fix SMTP reply codes for invalid address syntaxes (give 501;
+		never give multiple error messages for a single message).
+	Fix problem where a cached connection timeout rejects all
+		later connects to that host.
+	Fix incorrect error message if alias.c is compiled with DBM only.
+	Additional changes to fix nested conditionals (from Bruce Lilly).
+	Recover more gracefully from operating system failures, particularly
+		NULL returns from openmailer (from Noritoshi Demizu,
+		OMRON Corporation).
+	Log forward, alias, and userdb expand operations on log level 10;
+		concept suggested by P{r (Pell) Emanuelsson.
+	Changes for HPUX 8.07 compatibility.
+
+6.18/6.4	93/02/12
+	Allow any config option to be set using an M4 define.
+	Change UNAME compile flag to HASUNAME for IDA compatibility
+		(besides, it's a better name).
+	Note in README that on SunOS it must be linked -Bstatic.
+	Fairly major change in domain.c to handle wildcard MX records
+		more rationally.  NOTE: the "w" option (no wildcard MX
+		records match local domain) has been eliminated.
+	Fix some unset variable references pointed out by Bruce Lilly.
+	Fix host name in process titles when using cached connection.
+
+6.17/6.3	93/01/28
+	Fix System 5 compatibility changes to be compatible with the rest
+		of the world.
+
+6.16/6.3	93/01/28
+	Experimental fix for problem handling errors in the SMTP
+		protocol in conjunction with connection caching.
+	System 5 compatibility changes.
+
+6.15/6.3	93/01/26
+	Fix a bug that causes local mail delivered using -odq to be
+		eliminated as a duplicate (because it matched the
+		ctladdr, now passed in as a C line).  These changes
+		are pretty tricky......
+
+6.14/6.3	93/01/25
+	Add debugging for some MCI errors.
+
+6.13/6.3	93/01/22
+	Fix -e compatibility flag to take a value.
+	Fix a couple of minor compilation warnings on Sun cc.
+	Improve error messages in a few cases to be more self-explanatory.
+
+6.12/6.3	93/01/21
+	Fix yet-another problem with environment handling, pointed out
+		by Yoshitaka Tokugawa and Tom Ivar Helbekkmo.
+	Some heuristics to try to limit resource exhaustion problems
+		if a downstream host has been down for a long time.
+	Fix problem with incorrect host name being logged in "Connection
+		timed out" messages (from Tom Ivar Helbekkmo).
+	Fix some ANSI C problems (from Takahiro Kanbe).
+	Properly log message sender on returned mail during queue run.
+	Count number of recipients properly.
+	Fix a problem in yp map code.
+	Diagnose "message timed out" (from Motonori Nakamura).
+
+6.11/6.3	93/01/20
+	Fix problem with address delimitor inside quotes.
+	Define $k and $=k to be the UUCP name (from the uname call)
+		based on code from Bruce Lilly.
+
+6.10/6.2	93/01/18
+	Implement arpatounix (largely code from Bruce Lilly).
+	Log more info (suggested by John Myers).
+	Allow nested $?...$|...$. (inspired by code from Bruce Lilly of
+		Sony US).
+	POSIX compatibility (noted by Keith Bostic).
+	Handle SMTP MAIL command errors properly (urged by several people,
+		notably John Myers of CMU).
+	Do early diagnosis of .cf errors (notably referencing a RHS
+		substitution that isn't on the LHS).
+	Adjust checkpointing to better handle batched recipients, suggested
+		by John Myers.
+	Fix miscellaneous bugs.
+	(config files:)  Implement MAIL_HUB for all local mail (to handle
+		NFS-mounted directories) as urged by Tom Ivar Helbekkmo
+		of the Norwegian School of Economics.
+
+6.9/6.1 	93/01/13
+	Environment handling simplification/bug fix -- child processes
+		get a minimal, fixed environment.  This avoids different
+		behaviour in queue runs.
+	Handle commas inside comments properly.
+	Properly limit large messages submitted in -obq mode.
+
+6.8/6.1		93/01/10
+	Check mtime of thaw file against .cf and sendmail binary, based on
+		code from John Myers.
+
+6.7/6.1		93/01/10
+	MX piggybacking, based on code from John Myers@CMU.
+	Allow checkcompat to return -1 to mean tempfail.
+	Bug fix in m_mno computation.
+
+6.6/6.1		93/01/09
+	Tuning of queueing functions as recommended by John Gardiner Myers.
+	Return mail headers (no body) on messages with negative precedence.
+	Minor other bug fixes.
+
+6.5/6.1		93/01/03
+	Fix botch causing queued headers to have ?XX? prefixes.
+
+6.4/6.1		93/01/02
+	Changes to recognize special mailer types (e.g., file) early.
+
+6.3/6.1		93/01/01
+	Pass timeouts to sfgets.
+	Check for control characters in addresses.
+	Fixed deferred error reporting.
+	Report duplicate aliases.
+	Handle mixed case recursive aliases.
+	Misc bug fixes.
+
+6.2/6.1		92/12/30
+	Put return-receipt-to on a conf.c flag (but don't set it).
+	Fix minor syslog problem.