diff options
| -rw-r--r-- | sys/scsi/scsi_ses.h | 110 |
1 files changed, 75 insertions, 35 deletions
diff --git a/sys/scsi/scsi_ses.h b/sys/scsi/scsi_ses.h index 70923f7124f..82d595af9c4 100644 --- a/sys/scsi/scsi_ses.h +++ b/sys/scsi/scsi_ses.h @@ -1,4 +1,4 @@ -/* $OpenBSD: scsi_ses.h,v 1.2 2005/04/09 15:24:16 marco Exp $ */ +/* $OpenBSD: scsi_ses.h,v 1.3 2005/04/12 20:44:18 marco Exp $ */ /* * Copyright (c) 2005 Marco Peereboom * All rights reserved. @@ -34,6 +34,7 @@ struct ses_config_page { /* diagnostic page header */ u_int8_t page_code; +#define SES_CFG_DIAG_PAGE (0x01) u_int8_t nr_sub_enc; u_int8_t length[2]; /* n - 3 */ u_int8_t gencode[4]; @@ -56,35 +57,65 @@ struct ses_config_page { struct ses_type_desc_hdr { u_int8_t elem_type; +#define STDH_UNSPECIFIED (0x00) +#define STDH_DEVICE (0x01) +#define STDH_POWER_SUPPLY (0x02) +#define STDH_COOLING (0x03) +#define STDH_TEMP_SENSOR (0x04) +#define STDH_DOOR_LOCK (0x05) +#define STDH_AUDIBLE_ALARM (0x06) +#define STDH_ENC_SRVC_CTRL (0x07) +#define STDH_SCC_CTRL (0x08) +#define STDH_NONVOL_CACHE (0x09) +#define STDH_INV_OPER_REASON (0x0a) +#define STDH_UNINT_POWER_SUPP (0x0b) +#define STDH_DISPLAY (0x0c) +#define STDH_KEY_PAD (0x0d) +#define STDH_ENCLOSURE (0x0e) +#define STDH_SCSI_PORT_TRANS (0x0f) +#define STDH_LANGUAGE (0x10) +#define STDH_COMM_PORT (0x11) +#define STDH_VOLTAGE_SENSOR (0x12) +#define STDH_CURRENT_SENSOR (0x13) +#define STDH_SCSI_TARGET_PORT (0x14) +#define STDH_SCSI_INIT_PORT (0x15) +#define STDH_SIMP_SUBENC (0x16) +#define STDH_ARRAY_DEVICE (0x17) u_int8_t nr_elem; u_int8_t sub_enc_id; u_int8_t type_desc_len; }; -/* control structures, control structs are uses when SENDING */ +/* control structures, control structs are used when SENDING */ struct ses_dev_elmt_ctrl_diag { u_int8_t common_ctrl; +#define SDECD_RST_SWAP (0x10) +#define SDECD_DISABLE (0x20) +#define SDECD_PRDFAIL (0x40) +#define SDECD_SELECT (0x80) + u_int8_t reserved; u_int8_t byte3; -#define SDECD_RQST_IDENT 0x02 -#define SDECD_RQST_REMOVE 0x04 -#define SDECD_RQST_INSERT 0x08 -#define SDECD_DONT_REMOVE 0x40 -#define SDECD_ACTIVE 0x80 +#define SDECD_RQST_IDENT (0x02) +#define SDECD_RQST_REMOVE (0x04) +#define SDECD_RQST_INSERT (0x08) +#define SDECD_DONT_REMOVE (0x40) +#define SDECD_ACTIVE (0x80) u_int8_t byte4; -#define SDECD_ENABLE_BYP_B 0x04 -#define SDECD_ENABLE_BYP_A 0x08 -#define SDECD_DEVICE_OFF 0x10 -#define SDECD_RQST_FAULT 0x20 +#define SDECD_ENABLE_BYP_B (0x04) +#define SDECD_ENABLE_BYP_A (0x08) +#define SDECD_DEVICE_OFF (0x10) +#define SDECD_RQST_FAULT (0x20) }; struct ses_enc_ctrl_diag_page { u_int8_t page_code; +#define SES_CTRL_DIAG_PAGE (0x02) u_int8_t byte2; -#define SECDP_UNREC 0x01 -#define SECDP_CRIT 0x02 -#define SECDP_NONCRIT 0x04 -#define SECDP_INFO 0x08 +#define SECDP_UNREC (0x01) +#define SECDP_CRIT (0x02) +#define SECDP_NONCRIT (0x04) +#define SECDP_INFO (0x08) u_int8_t length[2]; u_int8_t gencode[4]; u_int8_t overallctrl[4]; @@ -93,36 +124,45 @@ struct ses_enc_ctrl_diag_page { }; /* status structures, status structs are uses when RECEIVING */ +/* device type, disk really */ struct ses_dev_elmt_status_diag { u_int8_t common_status; +#define SDESD_UNSUPPORTED (0x00) +#define SDESD_OK (0x01) +#define SDESD_CRITICAL (0x02) +#define SDESD_NONCRITICAL (0x03) +#define SDESD_UNRECOVERABLE (0x04) +#define SDESD_NOT_INSTALLED (0x05) +#define SDESD_UNKNOWN (0x06) +#define SDESD_NOT_AVAILABLE (0x07) u_int8_t slot_addr; u_int8_t byte3; -#define SDESD_REPORT 0x01 -#define SDESD_IDENT 0x02 -#define SDESD_RMV 0x04 -#define SDESD_RDY_INSRT 0x08 -#define SDESD_ENC_BYP_B 0x10 -#define SDESD_ENC_BYP_A 0x20 -#define SDESD_DONT_REMV 0x40 -#define SDESD_CLNT_BYP_A 0x80 +#define SDESD_REPORT (0x01) +#define SDESD_IDENT (0x02) +#define SDESD_RMV (0x04) +#define SDESD_RDY_INSRT (0x08) +#define SDESD_ENC_BYP_B (0x10) +#define SDESD_ENC_BYP_A (0x20) +#define SDESD_DONT_REMV (0x40) +#define SDESD_CLNT_BYP_A (0x80) u_int8_t byte4; -#define SDESD_DEV_BYP_B 0x01 -#define SDESD_DEV_BYP_A 0x02 -#define SDESD_BYP_B 0x04 -#define SDESD_BYP_A 0x08 -#define SDESD_DEV_OFF 0x10 -#define SDESD_FLT_RQSTD 0x20 -#define SDESD_FLT_SENSED 0x40 -#define SDESD_CLNT_BYP_B 0x80 +#define SDESD_DEV_BYP_B (0x01) +#define SDESD_DEV_BYP_A (0x02) +#define SDESD_BYP_B (0x04) +#define SDESD_BYP_A (0x08) +#define SDESD_DEV_OFF (0x10) +#define SDESD_FLT_RQSTD (0x20) +#define SDESD_FLT_SENSED (0x40) +#define SDESD_CLNT_BYP_B (0x80) }; struct ses_enc_stat_diag_page { u_int8_t page_code; u_int8_t byte2; -#define SESDP_UNREC 0x01 -#define SESDP_CRIT 0x02 -#define SESDP_NONCRIT 0x04 -#define SESDP_INFO 0x08 +#define SESDP_UNREC (0x01) +#define SESDP_CRIT (0x02) +#define SESDP_NONCRIT (0x04) +#define SESDP_INFO (0x08) u_int8_t length[2]; u_int8_t gencode[4]; u_int8_t overallstat[4]; |