diff options
| -rw-r--r-- | distrib/sets/lists/comp/mi | 1 | ||||
| -rw-r--r-- | sys/dev/ic/isp_tpublic.h | 429 |
2 files changed, 0 insertions, 430 deletions
diff --git a/distrib/sets/lists/comp/mi b/distrib/sets/lists/comp/mi index 30e51cad683..8a0561dd14f 100644 --- a/distrib/sets/lists/comp/mi +++ b/distrib/sets/lists/comp/mi @@ -287,7 +287,6 @@ ./usr/include/dev/ic/isp_openbsd.h ./usr/include/dev/ic/isp_stds.h ./usr/include/dev/ic/isp_target.h -./usr/include/dev/ic/isp_tpublic.h ./usr/include/dev/ic/ispmbox.h ./usr/include/dev/ic/ispreg.h ./usr/include/dev/ic/ispvar.h diff --git a/sys/dev/ic/isp_tpublic.h b/sys/dev/ic/isp_tpublic.h deleted file mode 100644 index c6ff0aa6798..00000000000 --- a/sys/dev/ic/isp_tpublic.h +++ /dev/null @@ -1,429 +0,0 @@ -/* $OpenBSD: isp_tpublic.h,v 1.12 2009/06/24 11:00:53 krw Exp $ */ -/* $FreeBSD: src/sys/dev/isp/isp_tpublic.h,v 1.19 2007/05/05 20:17:23 mjacob Exp $ */ -/*- - * Copyright (c) 1997-2007 by Matthew Jacob - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ -/* - * Host Adapter Public Target Interface Structures && Routines - */ - -#ifndef _ISP_TPUBLIC_H -#define _ISP_TPUBLIC_H 1 - -/* - * Action codes set by the MD target driver for - * the external layer to figure out what to do with. - */ -typedef enum { - QOUT_HBA_REG=0, /* the argument is a pointer to a hba_register_t */ - QOUT_ENABLE, /* the argument is a pointer to a enadis_t */ - QOUT_DISABLE, /* the argument is a pointer to a enadis_t */ - QOUT_TMD_START, /* the argument is a pointer to a tmd_cmd_t */ - QOUT_TMD_DONE, /* the argument is a pointer to a tmd_cmd_t */ - QOUT_NOTIFY, /* the argument is a pointer to a tmd_notify_t */ - QOUT_HBA_UNREG /* the argument is a pointer to a hba_register_t */ -} tact_e; - -/* - * Action codes set by the external layer for the - * MD driver to figure out what to do with. - */ -typedef enum { - QIN_HBA_REG=99, /* the argument is a pointer to a hba_register_t */ - QIN_GETINFO, /* the argument is a pointer to a info_t */ - QIN_SETINFO, /* the argument is a pointer to a info_t */ - QIN_GETDLIST, /* the argument is a pointer to a fc_dlist_t */ - QIN_ENABLE, /* the argument is a pointer to a enadis_t */ - QIN_DISABLE, /* the argument is a pointer to a enadis_t */ - QIN_TMD_CONT, /* the argument is a pointer to a tmd_cmd_t */ - QIN_TMD_FIN, /* the argument is a pointer to a tmd_cmd_t */ - QIN_NOTIFY_ACK, /* the argument is a pointer to a tmd_notify_t */ - QIN_HBA_UNREG /* the argument is a pointer to a hba_register_t */ -} qact_e; - -/* - * This structure is used to register to other software modules the - * binding of an HBA identifier, driver name and instance and the - * lun width capapbilities of this target driver. It's up to each - * platform to figure out how it wants to do this, but a typical - * sequence would be for the MD layer to find some external module's - * entry point and start by sending a QOUT_HBA_REG with info filled - * in, and the external module to call back with a QIN_HBA_REG that - * passes back the corresponding information. - */ -#define QR_VERSION 16 -typedef struct { - /* NB: tags from here to r_version must never change */ - void * r_identity; - void (*r_action)(qact_e, void *); - char r_name[8]; - int r_inst; - int r_version; - u_int32_t r_locator; - u_int32_t r_nchannels; - enum { R_FC, R_SPI } r_type; - void * r_private; -} hba_register_t; - -/* - * An information structure that is used to get or set per-channel transport layer parameters. - */ -typedef struct { - void * i_identity; - enum { I_FC, I_SPI } i_type; - int i_channel; - int i_error; - union { - struct { - u_int64_t wwnn_nvram; - u_int64_t wwpn_nvram; - u_int64_t wwnn; - u_int64_t wwpn; - } fc; - struct { - int iid; - } spi; - } i_id; -} info_t; - -/* - * An information structure to return a list of logged in WWPNs. FC specific. - */ -typedef struct { - void * d_identity; - int d_channel; - int d_error; - int d_count; - u_int64_t * d_wwpns; -} fc_dlist_t; -/* - * Notify structure - */ -typedef enum { - NT_ABORT_TASK=0x1000, - NT_ABORT_TASK_SET, - NT_CLEAR_ACA, - NT_CLEAR_TASK_SET, - NT_LUN_RESET, - NT_TARGET_RESET, - NT_BUS_RESET, - NT_LIP_RESET, - NT_LINK_UP, - NT_LINK_DOWN, - NT_LOGOUT, - NT_HBA_RESET -} tmd_ncode_t; - -typedef struct tmd_notify { - void * nt_hba; /* HBA tag */ - u_int64_t nt_iid; /* inititator id */ - u_int64_t nt_tgt; /* target id */ - u_int16_t nt_lun; /* logical unit */ - u_int16_t : 15, - nt_need_ack : 1; /* this notify needs an ACK */ - u_int64_t nt_tagval; /* tag value */ - u_int32_t nt_channel; /* channel id */ - tmd_ncode_t nt_ncode; /* action */ - void * nt_lreserved; - void * nt_hreserved; -} tmd_notify_t; -#define LUN_ANY 0xffff -#define TGT_ANY ((u_int64_t) -1) -#define INI_ANY ((u_int64_t) -1) -#define TAG_ANY ((u_int64_t) 0) -#define MATCH_TMD(tmd, iid, lun, tag) \ - ( \ - (tmd) && \ - (iid == INI_ANY || iid == tmd->cd_iid) && \ - (lun == LUN_ANY || lun == tmd->cd_lun) && \ - (tag == TAG_ANY || tag == tmd->cd_tagval) \ - ) - -/* - * A word about ENABLE/DISABLE: the argument is a pointer to a enadis_t - * with en_hba, en_iid, en_chan, en_tgt and en_lun filled out. - * - * If an error occurs in either enabling or disabling the described lun - * cd_error is set with an appropriate non-zero value. - */ -typedef struct { - void * en_private; /* for outer layer usage */ - void * en_hba; /* HBA tag */ - u_int64_t en_iid; /* initiator ID */ - u_int64_t en_tgt; /* target id */ - u_int16_t en_lun; /* logical unit */ - u_int16_t en_chan; /* channel on card */ - int en_error; -} enadis_t; - -/* - * Suggested Software Target Mode Command Handling structure. - * - * A note about terminology: - * - * MD stands for "Machine Dependent". - * - * This driver is structured in three layers: Outer MD, core, and inner MD. - * The latter also is bus dependent (i.e., is cognizant of PCI bus issues - * as well as platform issues). - * - * - * "Outer Layer" means "Other Module" - * - * Some additional module that actually implements SCSI target command - * policy is the recipient of incoming commands and the source of the - * disposition for them. - * - * The command structure below is one suggested possible MD command structure, - * but since the handling of thbis is entirely in the MD layer, there is - * no explicit or implicit requirement that it be used. - * - * The cd_private tag should be used by the MD layer to keep a free list - * of these structures. Code outside of this driver can then use this - * to identify it's own unit structures. That is, when not on the MD - * layer's freelist, the MD layer should shove into it the identifier - * that the outer layer has for it- passed in on an initial QIN_HBA_REG - * call (see below). - * - * The cd_hba tag is a tag that uniquely identifies the HBA this target - * mode command is coming from. The outer layer has to pass this back - * unchanged to avoid chaos. - * - * The cd_iid, cd_tgt, cd_lun and cd_port tags are used to identify the - * id of the initiator who sent us a command, the target claim to be, the - * lun on the target we claim to be, and the port instance (for multiple - * port host adapters) that this applies to (consider it an extra port - * parameter). The iid, tgt and lun values are deliberately chosen to be - * fat so that, for example, World Wide Names can be used instead of - * the units that the firmware uses (in the case where the MD - * layer maintains a port database, for example). - * - * The cd_tagtype field specifies what kind of command tag type, if - * any, has been sent with the command. Note that the Outer Layer - * still needs to pass the tag handle through unchanged even - * if the tag type is CD_UNTAGGED. - * - * The cd_cdb contains storage for the passed in command descriptor block. - * There is no need to define length as the callee should be able to - * figure this out. - * - * The tag cd_lflags are the flags set by the MD driver when it gets - * command incoming or when it needs to inform any outside entities - * that the last requested action failed. - * - * The tag cd_hflags should be set by any outside software to indicate - * the validity of sense and status fields (defined below) and to indicate - * the direction data is expected to move. It is an error to have both - * CDFH_DATA_IN and CDFH_DATA_OUT set. - * - * If the CDFH_STSVALID flag is set, the command should be completed (after - * sending any data and/or status). If CDFH_SNSVALID is set and the MD layer - * can also handle sending the associated sense data (either back with an - * FCP RESPONSE IU for Fibre Channel or otherwise automatically handling a - * REQUEST SENSE from the initator for this target/lun), the MD layer will - * set the CDFL_SENTSENSE flag on successful transmission of the sense data. - * It is an error for the CDFH_SNSVALID bit to be set and CDFH_STSVALID not - * to be set. It is an error for the CDFH_SNSVALID be set and the associated - * SCSI status (cd_scsi_status) not be set to CHECK CONDITON. - * - * The tag cd_data points to a data segment to either be filled or - * read from depending on the direction of data movement. The tag - * is undefined if no data direction is set. The MD layer and outer - * layers must agree on the meaning of cd_data and it is specifically - * not defined here. - * - * The tag cd_totlen is the total data amount expected to be moved - * over the life of the command. It may be set by the MD layer, possibly - * from the datalen field of an FCP CMND IU unit. If it shows up in the outer - * layers set to zero and the CDB indicates data should be moved, the outer - * layer should set it to the amount expected to be moved. - * - * The tag cd_resid should be the total residual of data not transferred. - * The outer layers need to set this at the beginning of command processing - * to equal cd_totlen. As data is successfully moved, this value is decreased. - * At the end of a command, any nonzero residual indicates the number of bytes - * requested by the command but not moved. - * - * The tag cd_xfrlen is the length of the currently active data transfer. - * This allows several interations between any outside software and the - * MD layer to move data. - * - * The reason that total length and total residual have to be tracked - * is to keep track of relative offset. - * - * The tags cd_sense and cd_scsi_status are pretty obvious. - * - * The tag cd_error is to communicate between the MD layer and outer software - * the current error conditions. - * - * The tag cd_lreserved, cd_hreserved are scratch areas for use for the MD - * and outer layers respectively. - * - */ - -#ifndef TMD_CDBLEN -#define TMD_CDBLEN 16 -#endif -#ifndef TMD_SENSELEN -#define TMD_SENSELEN 18 -#endif -#ifndef QCDS -#define QCDS (sizeof (void *)) -#endif - -typedef struct tmd_cmd { - void * cd_private; /* private data pointer */ - void * cd_hba; /* HBA tag */ - void * cd_data; /* 'pointer' to data */ - u_int64_t cd_iid; /* initiator ID */ - u_int64_t cd_tgt; /* target id */ - u_int8_t cd_lun[8]; /* logical unit */ - u_int64_t cd_tagval; /* tag value */ - u_int32_t cd_channel; /* channel index */ - u_int32_t cd_lflags; /* flags lower level sets */ - u_int32_t cd_hflags; /* flags higher level sets */ - u_int32_t cd_totlen; /* total data load */ - u_int32_t cd_resid; /* total data residual */ - u_int32_t cd_xfrlen; /* current data load */ - int32_t cd_error; /* current error */ - u_int8_t cd_tagtype; /* tag type */ - u_int8_t cd_scsi_status; - u_int8_t cd_sense[TMD_SENSELEN]; - u_int8_t cd_cdb[TMD_CDBLEN]; - union { - void * ptrs[QCDS / sizeof (void *)]; - u_int64_t llongs[QCDS / sizeof (u_int64_t)]; - u_int32_t longs[QCDS / sizeof (u_int32_t)]; - u_int16_t shorts[QCDS / sizeof (u_int16_t)]; - u_int8_t bytes[QCDS]; - } cd_lreserved[4], cd_hreserved[4]; -} tmd_cmd_t; - -/* defined tags */ -#define CD_UNTAGGED 0 -#define CD_SIMPLE_TAG 1 -#define CD_ORDERED_TAG 2 -#define CD_HEAD_TAG 3 -#define CD_ACA_TAG 4 - -#ifndef TMD_SIZE -#define TMD_SIZE (sizeof (tmd_cmd_t)) -#endif - -#define L0LUN_TO_FLATLUN(lptr) ((((lptr)[0] & 0x3f) << 8) | ((lptr)[1])) -#define FLATLUN_TO_L0LUN(lptr, lun) \ - (lptr)[1] = lun & 0xff; \ - if (sizeof (lun) == 1) { \ - (lptr)[0] = 0; \ - } else { \ - u_int16_t nl = lun; \ - if (nl == LUN_ANY) { \ - (lptr)[0] = (nl >> 8) & 0xff; \ - } else if (nl < 256) { \ - (lptr)[0] = 0; \ - } else { \ - (lptr)[0] = 0x40 | ((nl >> 8) & 0x3f); \ - } \ - } \ - memset(&(lptr)[2], 0, 6) - -/* - * Note that NODISC (obviously) doesn't apply to non-SPI transport. - * - * Note that knowing the data direction and lengh at the time of receipt of - * a command from the initiator is a feature only of Fibre Channel. - * - * The CDFL_BIDIR is in anticipation of the adoption of some newer - * features required by OSD. - * - * The principle selector for MD layer to know whether data is to - * be transferred in any QOUT_TMD_CONT call is cd_xfrlen- the - * flags CDFH_DATA_IN and CDFH_DATA_OUT define which direction. - */ -#define CDFL_SNSVALID 0x01 /* sense data (from f/w) good */ -#define CDFL_SENTSTATUS 0x02 /* last action sent status */ -#define CDFL_DATA_IN 0x04 /* target (us) -> initiator (them) */ -#define CDFL_DATA_OUT 0x08 /* initiator (them) -> target (us) */ -#define CDFL_BIDIR 0x0C /* bidirectional data */ -#define CDFL_ERROR 0x10 /* last action ended in error */ -#define CDFL_NODISC 0x20 /* disconnects disabled */ -#define CDFL_SENTSENSE 0x40 /* last action sent sense data */ -#define CDFL_BUSY 0x80 /* this command is not on a free list */ -#define CDFL_PRIVATE 0xFF000000 /* private layer flags */ - -#define CDFH_SNSVALID 0x01 /* sense data (from outer layer) good */ -#define CDFH_STSVALID 0x02 /* status valid */ -#define CDFH_DATA_IN 0x04 /* target (us) -> initiator (them) */ -#define CDFH_DATA_OUT 0x08 /* initiator (them) -> target (us) */ -#define CDFH_DATA_MASK 0x0C /* mask to cover data direction */ -#define CDFH_PRIVATE 0xFF000000 /* private layer flags */ - - -/* - * A word about the START/CONT/DONE/FIN dance: - * - * When the HBA is enabled for receiving commands, one may show up - * without notice. When that happens, the MD target mode driver - * gets a tmd_cmd_t, fills it with the info that just arrived, and - * calls the outer layer with a QOUT_TMD_START code and pointer to - * the tmd_cmd_t. - * - * The outer layer decodes the command, fetches data, prepares stuff, - * whatever, and starts by passing back the pointer with a QIN_TMD_CONT - * code which causes the MD target mode driver to generate CTIOs to - * satisfy whatever action needs to be taken. When those CTIOs complete, - * the MD target driver sends the pointer to the cmd_tmd_t back with - * a QOUT_TMD_DONE code. This repeats for as long as necessary. These - * may not be done in parallel- they are sequential operations. - * - * The outer layer signals it wants to end the command by settings within - * the tmd_cmd_t itself. When the final QIN_TMD_CONT is reported completed, - * the outer layer frees the tmd_cmd_t by sending the pointer to it - * back with a QIN_TMD_FIN code. - * - * The graph looks like: - * - * QOUT_TMD_START -> [ QIN_TMD_CONT -> QOUT_TMD_DONE ] * -> QIN_TMD_FIN. - * - */ - -/* - * Target handler functions. - * - * The MD target handler function (the outer layer calls this) - * should be be prototyped like: - * - * void target_action(qact_e, void *arg) - * - * The outer layer target handler function (the MD layer calls this) - * should be be prototyped like: - * - * void scsi_target_handler(tact_e, void *arg) - */ -#endif /* _ISP_TPUBLIC_H */ -/* - * vim:ts=4:sw=4:expandtab - */ |