7 files changed, 166 insertions, 0 deletions
diff --git a/distrib/notes/zaurus/contents b/distrib/notes/zaurus/contents
new file mode 100644
index 00000000000..12e3d0547ea
--- /dev/null
+++ b/distrib/notes/zaurus/contents
@@ -0,0 +1,34 @@
+dnl	$OpenBSD: contents,v 1.1 2005/01/10 03:30:48 drahn Exp $
+TopPart
+
+OpenBSDdistsets
+
+OpenBSDbsd
+
+OpenBSDrd
+dnl not yet...
+dnl OpenBSDcd
+
+DistributionDescription(eleven)
+
+OpenBSDbase(40639006,107004458,shared)
+
+OpenBSDcomp(17316979,57637693,shared)
+
+OpenBSDetc(1698829,6544396)
+
+OpenBSDgame(2647774,5967190)
+
+OpenBSDman(7234770,25874762)
+
+OpenBSDmisc(2245813,7365432)
+
+OpenBSDxbase(10673091,28798093)
+
+OpenBSDxetc(447126,2313145)
+
+OpenBSDxfont(32513427,36041353)
+
+OpenBSDxserv(9393219,24479132)
+
+OpenBSDxshare(1934460,9968263)
diff --git a/distrib/notes/zaurus/hardware b/distrib/notes/zaurus/hardware
new file mode 100644
index 00000000000..20bcfff5115
--- /dev/null
+++ b/distrib/notes/zaurus/hardware
@@ -0,0 +1,45 @@
+dnl	$OpenBSD: hardware,v 1.1 2005/01/10 03:30:48 drahn Exp $
+OpenBSD/MACHINE runs on the Sharp Zaurus C3000, C860(?)
+
+Supported devices {:-include-:}:
+	Ethernet Adapters
+		CF ne3000 (?)
+	Wireless Ethernet Adapters
+		USB Adapters
+		    Acer Warplink USB-400
+		    Actiontec HWU01170
+		    Corega WLUSB-11
+		    I-O DATA WN-B11/USB
+		    Intel PRO/Wireless 2011B
+		    Intersil Prism 2X
+		    JVC MP-XP7250
+		    Linksys WUSB11 v3.0
+		    Linksys WUSB12
+		    Melco WLI-USB-KS11G
+		    Microsoft MN510
+		    Netgear MA111
+		    Siemens SpeedStream SS1022
+		    Syntax USB-400
+	Serial ports
+		Onboard serial (pxacom) port
+	Universal Serial Bus (USB) Devices
+		USB Audio
+		USB Diamond Multimedia Rio MP3 players
+		USB Ethernet adapters, see above
+		USB Generic Human Interface Devices (catch-all)
+		USB Handspring Visor
+		USB Hubs
+		USB Keyboards
+		USB Mass Storage devices, i.e., USB floppy drives and
+		  USB memory stick controllers
+		USB Mice
+		USB Modems
+		USB Printers
+		USB Scanners
+		USB-USB cables
+		USB Y@p phone
+	Keyboards
+		USB keyboards
+	Pointing Devices
+		USB mice
+	PXALCD Onboard Display.
diff --git a/distrib/notes/zaurus/install b/distrib/notes/zaurus/install
new file mode 100644
index 00000000000..d31d1de66ea
--- /dev/null
+++ b/distrib/notes/zaurus/install
@@ -0,0 +1,59 @@
+dnl	$OpenBSD: install,v 1.1 2005/01/10 03:30:48 drahn Exp $
+OpenBSDInstallPrelude
+
+MANUALLY
+
+
+OpenBSDInstallPart2
+
+OpenBSDBootMsgs
+
+	You will next be asked for your terminal type.  You should just
+	hit return to select the default (vt220).
+
+OpenBSDInstallPart3({:- or "wd0" for IDE drives-:})
+
+	Next you will have to edit or create a disk label for the disk
+	OpenBSD is being installed on.  If there are any existing
+	partitions defined (for any operating system), and a disk label
+	is not found, you will first be given an opportunity to run
+	fdisk and create an OpenBSD partition.
+
+	If fdisk is being invoked on your behalf, it will start by
+	displaying the current partitions defined and then allow you
+	to modify this information, add new partitions and change
+	which partition to boot from by default.  If you make a mistake,
+	you will be allowed to repeat this procedure as necessary to
+	correct this.  Note that you should make OpenBSD be the active
+	partition at least until the install has been completed.
+
+OpenBSDInstallPart4({:- If you have Linux partitions
+	defined on the disk, these will usually show up as partition
+	'h', 'i' and so on.-:})
+
+	Note that all OpenBSD partitions in the disk label must have an
+	offset that makes it start within the OpenBSD part of the disk,
+	and a size that keeps it inside of that portion of the disk.  This
+	is within the bounds of the 'c' partition if the disk is not being
+	shared with other operating systems, and within the OpenBSD fdisk
+	partition if the disk is being shared.
+
+OpenBSDInstallPart5(wd0)
+
+OpenBSDInstallNet({:-CD-ROM, -:},nofloppy)
+
+OpenBSDFTPInstall
+
+OpenBSDHTTPInstall
+
+OpenBSDTAPEInstall
+
+OpenBSDCDROMInstall
+
+OpenBSDDISKInstall({:-"wdN" or -:},,{:- or Linux (ext2)-:})
+
+OpenBSDCommonFS
+
+OpenBSDCommonURL
+
+OpenBSDCongratulations
diff --git a/distrib/notes/zaurus/prep b/distrib/notes/zaurus/prep
new file mode 100644
index 00000000000..24877ceddfd
--- /dev/null
+++ b/distrib/notes/zaurus/prep
@@ -0,0 +1,7 @@
+dnl	$OpenBSD: prep,v 1.1 2005/01/10 03:30:48 drahn Exp $
+To be able to boot the OpenBSD/MACHINE installation program, you will
+need to acquire some limited knowledge of Linux, the low-level
+process that controls the microprocessor after hardware initialization.
+
+dnl
+dnl XXX bootable partitions
diff --git a/distrib/notes/zaurus/upgrade b/distrib/notes/zaurus/upgrade
new file mode 100644
index 00000000000..b1cd247d9c9
--- /dev/null
+++ b/distrib/notes/zaurus/upgrade
@@ -0,0 +1,2 @@
+dnl	$OpenBSD: upgrade,v 1.1 2005/01/10 03:30:48 drahn Exp $
+OpenBSDUpgrade({:-the CD-ROM-:})
diff --git a/distrib/notes/zaurus/whatis b/distrib/notes/zaurus/whatis
new file mode 100644
index 00000000000..755751ab68f
--- /dev/null
+++ b/distrib/notes/zaurus/whatis
@@ -0,0 +1,3 @@
+dnl	$OpenBSD: whatis,v 1.1 2005/01/10 03:30:48 drahn Exp $
+OpenBSD/MACHINE is a port to the Sharp Zaurus (C3000/C860)
+more may be supported in the future.
diff --git a/distrib/notes/zaurus/xfer b/distrib/notes/zaurus/xfer
new file mode 100644
index 00000000000..98f28216b2b
--- /dev/null
+++ b/distrib/notes/zaurus/xfer
@@ -0,0 +1,16 @@
+dnl	$OpenBSD: xfer,v 1.1 2005/01/10 03:30:48 drahn Exp $
+Installation is supported from several media types, including:
+
+	CD-ROM
+	FFS partitions
+	DOS (FAT) partitions
+	EXT2 partitions
+	FTP
+	HTTP
+
+OpenBSDXferShortPrelude
+
+
+OpenBSDXferBareTape
+
+OpenBSDXferFFS