diff options
105 files changed, 0 insertions, 29072 deletions
diff --git a/sys/arch/mvme88k/conf/GENERIC b/sys/arch/mvme88k/conf/GENERIC deleted file mode 100644 index 4ca5ed587b4..00000000000 --- a/sys/arch/mvme88k/conf/GENERIC +++ /dev/null @@ -1,119 +0,0 @@ -# -# GENERIC AMIGA -# -# $Id: GENERIC,v 1.4 1996/09/20 06:45:16 deraadt Exp $ -# -# This configuration file contains all possible options -# - -include "std.mvme1x7" - -maxusers 8 -options TIMEZONE=300, DST=1 - -# -# processors this kernel should support -# -options "M88000" # support for 88K - -options SWAPPAGER # Pager for processes (Required) -options DEVPAGER # Pager for devices (Required) - -# -# Networking options -# -options INET # IP networking support (Required) -#options ISO # ISO Networking support -#options TPIP # ARGO TP networking support -#options CCITT # CCITT X.25 -#options NS # Xerox XNS -#options EON # ISO CLNL over IP -#options GATEWAY # Packet forwarding -#options DIRECTED_BROADCAST # Broadcast across subnets -#options NSIP # XNS over IP - -# -# File system related options -# -options QUOTA # Disk quotas for local disks -options NFSSERVER # Network File System server side code -options NFSCLIENT # Network File System client side code - -# -# File systems -# -options FFS # Berkeley fast file system -options MFS # Memory based filesystem -options PROCFS # Process filesystem -options KERNFS # Kernel parameter filesystem (Recommended) -options FDESC # /dev/fd filesystem -options NULLFS # Loopback filesystem -options FIFO # FIFO operations on vnodes (Recommended) -options "CD9660" # ISO 9660 file system, with Rock Ridge -#options PORTAL # Portal filesystem -#options MSDOSFS # MS-DOS filesystem - - -# -# Compatability options for various existing systems -# -options "COMPAT_09" # compatability with older NetBSD release -options "COMPAT_43" # 4.3 BSD compatible system calls -#options "TCP_COMPAT_42" # Use 4.2 BSD style TCP -options "COMPAT_NOMID" # allow nonvalid machine id executables -#options COMPAT_HPUX # HP300 compatability - -# -# Support for System V IPC facilities. -# -#options SYSVSHM # System V-like shared memory -#options SYSVMSG # System V-like messages -#options SYSVSEM # System V-like semaphores - -# -# Support for various kernel options -# -options GENERIC # Mini-root boot support -#options LKM # Loadable kernel modules -options KTRACE # Add kernel tracing system call -options DIAGNOSTIC # Add additional error checking code -options "NKMEMCLUSTERS=256" # Size of kernel malloc area - -# -# Misc. debuging options -# -options PANICWAIT # Require keystroke to dump/reboot -options DEBUG # Add debugging statements -#options DDB # Kernel debugger -#options SYSCALL_DEBUG # debug all syscalls. -#options SCSIDEBUG # Add SCSI debugging statements -#options KGDB # Kernel debugger (KGDB) support -#options PANICBUTTON # Forced crash via keypress (???) -# -# devices -# -m187le0 at mainbus0 # Ethernet -m187tty0 at mainbus # tty - -# scsi stuff, all possible -m187scsi0 at mainbus0 -bugscsi0 at mainbus0 - -scsibus0 at m187scsi0 -scsibus1 at bugscsi0 - -# each hard drive from low target to high -# will configure to the next available sd unit number -sd* at scsibus? target ? lun ? # scsi disks -st* at scsibus? target ? lun ? # scsi tapes -cd* at scsibus? target ? lun ? # scsi cd's -ch* at scsibus? target ? lun ? # scsi cd changers -ss* at scsibus? target ? lun ? # scsi scanners -uk* at scsibus? target ? lun ? # unknown scsi - -pseudo-device sl # slip -pseudo-device ppp # ppp -pseudo-device pty 16 # pseudo terminals -pseudo-device loop # network loopback - -config netbsd swap on generic diff --git a/sys/arch/mvme88k/conf/MYBOX b/sys/arch/mvme88k/conf/MYBOX deleted file mode 100644 index d8872ff691d..00000000000 --- a/sys/arch/mvme88k/conf/MYBOX +++ /dev/null @@ -1,63 +0,0 @@ -# $Id: MYBOX,v 1.2 1996/09/20 06:45:16 deraadt Exp $ - -include "std.m88k" - -maxusers 8 -options TIMEZONE=300, DST=1 -options BYTE_MSF -options SWAPPAGER, DEVPAGER -#options INET -options FFS, MFS, FDESC -#options "COMPAT_42", "COMPAT_43" -options GENERIC, KTRACE, DIAGNOSTIC, "NKMEMCLUSTERS=256" -#options PANICWAIT, DEBUG, DDB -options PANICWAIT, DEBUG, DDB - -#options "CD9660", PORTAL, MSDOSFS, PROCFS, NULLFS, FIFO, KERNFS -#options NFSSERVER, NFSCLIENT -#options SYSVSHM, SYSVMSG, SYSVSEM -#options SYSCALL_DEBUG, SCSIDEBUG, KGDB - -# scsi stuff, all possible -#m187le0 at mainbus0 # Ethernet -#m187tty0 at mainbus0 # tty -#ser0 at mainbus0 # tty -#ser0 at pcc0 # tty - -bugtty0 at mainbus0 # bug tty - -# scsi stuff, all possible -#m187scsi0 at mainbus0 -#bugscsi0 at mainbus0 -#bugscsi0 at pcc0 - -#scsibus0 at m187scsi0 -#scsibus0 at bugscsi0 -#scsibus0 at scsi0 -# -# compat. -# -#sd0 at scsibus? target 0 lun 0 -#sd1 at scsibus? target 1 lun 0 -#sd2 at scsibus? target 2 lun 0 -#sd3 at scsibus? target 3 lun 0 -#sd4 at scsibus? target 4 lun 0 -#sd5 at scsibus? target 5 lun 0 -#sd6 at scsibus? target 6 lun 0 - -# -# This is nicer however many amiga setups expect sd units to refer to -# scsi target numbers. If this is not the case, you can remove the -# specific sdx lines above and each hard drive from low target to high -# will configure to the next available sd unit number - -#sd* at scsibus? target ? lun ? # scsi disks -#st* at scsibus? target ? lun ? # scsi tapes -#cd* at scsibus? target ? lun ? # scsi cd's - -#pseudo-device sl # slip -#pseudo-device ppp # ppp -#pseudo-device pty 16 # pseudo terminals -#pseudo-device loop # network loopback -# -config netbsd swap on generic diff --git a/sys/arch/mvme88k/conf/Makefile.m88k b/sys/arch/mvme88k/conf/Makefile.m88k deleted file mode 100644 index ff4b96f689b..00000000000 --- a/sys/arch/mvme88k/conf/Makefile.m88k +++ /dev/null @@ -1,178 +0,0 @@ -# @(#)Makefile.hp300 7.10 (Berkeley) 6/27/91 -# $Id: Makefile.m88k,v 1.3 1996/04/24 12:05:20 mickey Exp $ -# -# Makefile for NetBSD -# -# This makefile is constructed from a machine description: -# config machineid -# Most changes should be made in the machine description -# /sys/arch/m88k/conf/``machineid'' -# after which you should do -# config machineid -# Machine generic makefile changes should be made in -# /sys/arch/m88k/conf/Makefile.m88k -# after which config should be rerun for all machines of that type. -# -# N.B.: NO DEPENDENCIES ON FOLLOWING FLAGS ARE VISIBLE TO MAKEFILE -# IF YOU CHANGE THE DEFINITION OF ANY OF THESE RECOMPILE EVERYTHING -# -# -DTRACE compile in kernel tracing hooks -# -DQUOTA compile in file system quotas - - -# DEBUG is set to -g by config if debugging is requested (config -g). -# PROF is set to -pg by config if profiling is requested (config -p). -AS= as ${DEBUG} -CC= cc ${DEBUG} -CPP= cpp -LD= ld -TOUCH= touch -f -c -AWK= awk -TR= tr -s - -# source tree is located via $S relative to the compilation directory -S= ../../../.. -M88K= ../.. - -INCLUDES= -I. -I$S/arch -I$S -I$S/sys -.if defined(DESTDIR) -INCLUDES+= -nostdinc -idirafter ${DESTDIR}/usr/include -.endif -COPTS= ${INCLUDES} ${IDENT} -DKERNEL -D_KERNEL -DGOOFYLDOFFSET=0x20 -Dm88k -CFLAGS= -O ${COPTS} -fwritable-strings - -### find out what to use for libkern -.include "$S/lib/libkern/Makefile.inc" -.ifndef PROF -LIBKERN= ${KERNLIB} -.else -LIBKERN= ${KERNLIB_PROF} -.endif - -### find out what to use for libcompact -.include "$S/compat/common/Makefile.inc" -.ifndef PROF -LIBCOMPACT= ${COMPATLIB} -.else -LIBCOMPACT= ${COMPATLIB_PROF} -.endif - -# compile rules: rules are named ${TYPE}_${SUFFIX}${CONFIG_DEP} -# where TYPE is NORMAL, DRIVER, or PROFILE}; SUFFIX is the file suffix, -# capitalized (e.g. C for a .c file), and CONFIG_DEP is _C if the file -# is marked as config-dependent. - -NORMAL_C= ${CC} -c ${CFLAGS} ${PROF} $< -NORMAL_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $< - -DRIVER_C= ${CC} -c ${CFLAGS} ${PROF} $< -DRIVER_C_C= ${CC} -c ${CFLAGS} ${PROF} ${PARAM} $< - -PROFILE_C= ${CC} -S -c ${COPTS} $<; \ - sed -e s/_mcount/mcount/ -e s/subrmcount/subr_mcount/ <$*.s | \ - ${AS} -o $@; \ - rm -f $*.s - -NORMAL_S= ${CPP} ${COPTS} $< | ${TR} '\\' '\012' | ${AS} -o $@ -NORMAL_S_C= ${CPP} ${COPTS} ${PARAM} $< | ${TR} '\\' '\012' | ${AS} -o $@ - -%OBJS - -%CFILES - -# load lines for config "xxx" will be emitted as: -# xxx: ${SYSTEM_DEP} swapxxx.o -# ${SYSTEM_LD_HEAD} -# ${SYSTEM_LD} swapxxx.o -# ${SYSTEM_LD_TAIL} -SYSTEM_OBJ= locore.o ${FPSP} ${OBJS} param.o ioconf.o \ - ${LIBKERN} ${LIBCOMPAT} -SYSTEM_DEP= Makefile ${SYSTEM_OBJ} -SYSTEM_LD_HEAD= @echo loading $@;rm -f $@ -SYSTEM_LD= -@if [ X${DEBUG} = X-g ]; \ - then strip=-X; \ - else strip=-x; \ - fi; \ - echo ${LD} $$strip -Ttext 10020 -o $@ ${SYSTEM_OBJ} vers.o; \ - ${LD} $$strip -Ttext 10020 -o $@ ${SYSTEM_OBJ} libgcc.a vers.o -SYSTEM_LD_TAIL= @size $@; chmod 755 $@; \ - [ X${DEBUG} = X-g ] && { \ - echo cp $@ $@.gdb; rm -f $@.gdb; cp $@ $@.gdb; \ - echo strip -d $@; strip -d $@; } || true - -%LOAD - -vers.o: newvers - -newvers: - sh $S/conf/newvers.sh ${KERN_IDENT} - ${CC} $(CFLAGS) -c vers.c - -clean:: - rm -f eddep *netbsd netbsd.gdb tags *.o locore.i \ - [a-z]*.s [Ee]rrs errs linterrs makelinks - -lint: /tmp param.c - @lint -hbxn -DGENERIC -Dvolatile= ${COPTS} ${PARAM} -UKGDB \ - ${M88K}/m88k/Locore.c ${CFILES} ${M88K}/m88k/swapgeneric.c \ - ioconf.c param.c| \ - grep -v 'struct/union .* never defined' | \ - grep -v 'possible pointer alignment problem' - -locore.o: assym.s ${M88K}/m88k/eh.S ${M88K}/m88k/locore.S -locore.o: machine/trap.h machine/psl.h machine/cpu.h - ${CPP} -DLOCORE ${COPTS} ${M88K}/m88k/locore.S | ${TR} '\\' '\012' | ${AS} -o locore.o - -# the following is necessary because autoconf.o depends on #if GENERIC -autoconf.o: Makefile - -# the following are necessary because the files depend on the types of -# hp cpu's included in the system configuration -machdep.o sys_machdep.o pmap.o pmap_bootstrap.o trap.o dma.o: Makefile - -# depend on network or filesystem configuration -uipc_domain.o uipc_proto.o vfs_conf.o locore.o: Makefile -if_tun.o if_loop.o if_ethersubr.o: Makefile -in_proto.o: Makefile - -# depend on maxusers -assym.s: Makefile - -assym.s: genassym - ./genassym >assym.s -# cp assym.s ${.CURDIR}/../../include - -genassym: - ${CC} -static ${INCLUDES} ${IDENT} ${PARAM} -Dm88k \ - -o genassym ${M88K}/m88k/genassym.c - rm genassym.o - -depend: assym.s param.c - for f in ${CFILES} ioconf.c param.c ; \ - do \ - (mkdep -a ${COPTS} $${f}) \ - done - mkdep -a -p ${INCLUDES} ${IDENT} ${PARAM} ${M88K}/m88k/genassym.c - -links: - egrep '#if' ${CFILES} | sed -f $S/conf/defines | \ - sed -e 's/:.*//' -e 's/\.c/.o/' | sort -u > dontlink - echo ${CFILES} | tr -s ' ' '\12' | sed 's/\.c/.o/' | \ - sort -u | comm -23 - dontlink | \ - sed 's,../.*/\(.*.o\),rm -f \1;ln -s ../GENERIC/\1 \1,' > makelinks - sh makelinks && rm -f dontlink - -tags: - @echo "see $S/kern/Makefile for tags" - -ioconf.o: ioconf.c - ${CC} -c ${CFLAGS} ioconf.c - -param.c: $S/conf/param.c - rm -f param.c - cp $S/conf/param.c . - -param.o: param.c Makefile - ${CC} -c ${CFLAGS} ${PARAM} param.c - -%RULES diff --git a/sys/arch/mvme88k/conf/files.m88k b/sys/arch/mvme88k/conf/files.m88k deleted file mode 100644 index 6ca8fc07080..00000000000 --- a/sys/arch/mvme88k/conf/files.m88k +++ /dev/null @@ -1,106 +0,0 @@ -# $NetBSD$ - -# mvme88k-specific configuration info - -# maxpartitions must be first item in files.${ARCH} -maxpartitions 8 - -maxusers 2 8 64 - -device mainbus at root {} -file arch/m88k/dev/mb.c - -device bugtty at mainbus: tty -file arch/m88k/dev/bugtty.c bugtty needs-count - -device cpu at mainbus - -device pcc at mainbus {} -file arch/m88k/dev/pcc2.c pcc - -device vme at mainbus {} - -device nvram at pcc -file arch/m88k/dev/nvram.c nvram - -device clock at pcc -file arch/m88k/dev/rtc.c clock - -#device ser at pcc: tty -#file arch/m88k/dev/bugtty.c ser needs-count - -device bugscsi at pcc -#file arch/m88k/dev/bugscsi.c bugscsi needs-flag - -device ether at pcc - -device scsi at pcc {} - -#define scsi {} - -device scsibus at scsi {target = -1, lun = -1} -# adapter driver for 1x7 - -device cd at scsibus: disk -#file scsi/cd.c cd needs-flag -device sd at scsibus: disk -#file scsi/sd.c sd needs-flag -device ch at scsibus: disk -#file scsi/ch.c cd needs-flag -device st at scsibus: tape -#file scsi/st.c st needs-flag -device su at scsibus: disk -#file scsi/su.c su needs-flag -device uk at scsibus: disk -#file scsi/uk.c uk needs-flag - -# list of standard files -file dev/cons.c ite ser tty -file dev/cninit.c -#file scsi/scsi_base.c scsi -#file scsi/scsi_ioctl.c scsi -#file scsi/scsiconf.c scsi -#file arch/m88k/autoconf.c -#file arch/m88k/conf.c -##file arch/m88k/db_disasm.c -##file arch/m88k/db_interface.c -##file arch/m88k/db_trace.c -#file arch/m88k/disksubr.c -#file arch/m88k/in_cksum.c -#file arch/m88k/machdep.c -#file arch/m88k/mem.c -##file arch/m88k/microtime.s -##file arch/m88k/ns_cksum.c -#file arch/m88k/pmap.c -##file arch/m88k/process_machdep.c -##file arch/m88k/random.s -#file arch/m88k/sys_machdep.c -#file arch/m88k/trap.c -#file arch/m88k/vm_machdep.c -#file arch/m88k/locore.S -#file arch/m88k/ -file arch/m88k/dev/clock.c -file arch/m88k/m88k/autoconf.c -file arch/m88k/m88k/conf.c -file arch/m88k/m88k/cmmu.c -file arch/m88k/m88k/eh.S -#file arch/m88k/m88k/genassym.c -#file arch/m88k/m88k/locore.S -file arch/m88k/m88k/locore2.c -file arch/m88k/m88k/locore_asm_routines.S -file arch/m88k/m88k/locore_c_routines.c -file arch/m88k/m88k/m1x7_init.c -file arch/m88k/m88k/m88100_fp.S -file arch/m88k/m88k/machdep.c -file arch/m88k/m88k/pmap.c -file arch/m88k/m88k/process.S -file arch/m88k/m88k/process_machdep.c -file arch/m88k/m88k/trap.c -file arch/m88k/m88k/vm_machdep.c - -file arch/m88k/ddb/db_disasm.c -file arch/m88k/ddb/db_interface.c -file arch/m88k/ddb/db_sstep.c -file arch/m88k/ddb/db_trace.c - -file arch/m88k/dev/m88k/bugio.c diff --git a/sys/arch/mvme88k/conf/std.m88k b/sys/arch/mvme88k/conf/std.m88k deleted file mode 100644 index 2b9a56abff4..00000000000 --- a/sys/arch/mvme88k/conf/std.m88k +++ /dev/null @@ -1,7 +0,0 @@ -# standard amiga information -# $Id: std.m88k,v 1.1 1995/10/18 10:54:18 deraadt Exp $ -machine m88k - -mainbus0 at root -#pcc0 at mainbus0 -#scsi0 at pcc0 diff --git a/sys/arch/mvme88k/ddb/db_disasm.c b/sys/arch/mvme88k/ddb/db_disasm.c deleted file mode 100644 index 17733167572..00000000000 --- a/sys/arch/mvme88k/ddb/db_disasm.c +++ /dev/null @@ -1,777 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ - -/* - * m88k disassembler for use in ddb - */ - -#include <machine/db_machdep.h> -#include <ddb/db_sym.h> /* DB_STGY_PROC, db_printsym() */ -#include <ddb/db_access.h> /* db_get_value() */ -#include <ddb/db_output.h> /* db_printf() */ - -static char *instwidth[4] = { - ".d", " ", ".h", ".b" -}; - -static char *condname[6] = { - "gt0 ", "eq0 ", "ge0 ", "lt0 ", "ne0 ", "le0 " -}; - -static char *ctrlreg[64] = { - "cr0(PID) ", - "cr1(PSR) ", - "cr2(EPSR) ", - "cr3(SSBR) ", - "cr4(SXIP) ", - "cr5(SNIP) ", - "cr6(SFIP) ", - "cr7(VBR) ", - "cr8(DMT0) ", - "cr9(DMD0) ", - "cr10(DMA0) ", - "cr11(DMT1) ", - "cr12(DMD1) ", - "cr13(DMA1) ", - "cr14(DMT2) ", - "cr15(DMD2) ", - "cr16(DMA2) ", - "cr17(SR0) ", - "cr18(SR1) ", - "cr19(SR2) ", - "cr20(SR3) ", - "fcr0(FPECR)", - "fcr1(FPHS1)", - "fcr2(FPLS1)", - "fcr3(FPHS2)", - "fcr4(FPLS2)", - "fcr5(FPPT) ", - "fcr6(FPRH) ", - "fcr7(FPRL) ", - "fcr8(FPIT) ", - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - "fcr62(FPSR)", - "fcr63(FPCR)" -}; -#define printval(x) if (x<0) db_printf ("-0x%X", -x); else db_printf("0x%X",x) - -/* Handlers immediate integer arithmetic instructions */ -static void -oimmed(long inst, char *opcode, long iadr) -{ - register int Linst = inst & 0177777; - register int Hinst = inst >> 16; - register int H6inst = Hinst >> 10; - register int rs1 = Hinst & 037; - register int rd = (Hinst >> 5) & 037; - - if ((H6inst > 017) && (H6inst < 030) && (H6inst & 01) == 1) - db_printf("\t%s.u", opcode); - else { - db_printf("\t%s", opcode); - db_printf(" "); - } - db_printf("\t\tr%-3d,r%-3d,", rd, rs1); - printval(Linst); -} - - -/* Handles instructions dealing with control registers */ -static void -ctrlregs(long inst, char *opcode, long iadr) -{ - register int L6inst = (inst >> 11) & 037; - register int creg = (inst >> 5) & 077; - register int rd = (inst >> 21) & 037; - register int rs1 = (inst >> 16) & 037; - - db_printf("\t%s", opcode); - - if (L6inst == 010 || L6inst == 011) - db_printf("\t\tr%-3d,%s", rd, ctrlreg[creg]); - else - if (L6inst == 020 || L6inst == 021) - db_printf("\t\tr%-3d,%s", rs1, ctrlreg[creg]); - else - db_printf("\t\tr%-3d,r%-3d,%s", rd, rs1, ctrlreg[creg]); -} - - -static void -printsod(int t) -{ - if (t == 0) - db_printf("s"); - else - db_printf("d"); -} -/* Handles floating point instructions */ -static void -sindou(int inst, char *opcode, long iadr) -{ - register int rs2 = inst & 037; - register int td = (inst >> 5) & 03; - register int t2 = (inst >> 7) & 03; - register int t1 = (inst >> 9) & 03; - register int rs1 = (inst >> 16) & 037; - register int rd = (inst >> 21) & 037; - register int checkbits = (inst >> 11) & 037; - - db_printf("\t%s.", opcode); - printsod(td); - if ((checkbits > 010 && checkbits < 014) || (checkbits == 04)) { - printsod(t2); - db_printf(" "); - if (checkbits == 012 || checkbits == 013) - db_printf("\t\tr%-3d,r%-3d", rd, rs2); - else - db_printf("\t\tr%-3d,r%-3d", rd, rs2); - } else { - printsod(t1); - printsod(t2); - db_printf("\t\tr%-3d,r%-3d,r%-3d", rd, rs1, rs2); - } -} - - -static void -jump(long inst, char *opcode, long iadr) -{ - register int rs2 = inst & 037; - register int Nbit = (inst >> 10) & 01; - - db_printf("\t%s", opcode); - if (Nbit == 1) - db_printf(".n"); - else - db_printf(" "); - db_printf("\t\tr%-3d", rs2); -} - - -/* Handles ff1, ff0, tbnd and rte instructions */ -static void -instset(long inst, char *opcode, long iadr) -{ - register int rs2 = inst & 037; - register int rs1 = (inst >> 16) & 037; - register int rd = (inst >> 21) & 037; - register int checkbits = (inst >> 10) & 077; - register int H6inst = (inst >> 26) & 077; - - db_printf("\t%s", opcode); - if (H6inst == 076) { - db_printf("\t\tr%-3d,", rs1); - printval(inst & 0177777); - } else - if ((checkbits == 072) || (checkbits == 073)) - db_printf("\t\tr%-3d,r%-3d", rd, rs2); - else - if (checkbits == 076) - db_printf("\t\tr%-3d,r%-3d", rs1, rs2); -} - -static void -symofset(int disp, int bit, int iadr) -{ - long addr; - - if (disp & (1 << (bit - 1))) { - /* negative value */ - addr = iadr + ((disp << 2) | (~0 << bit)); - } else { - addr = iadr + (disp << 2); - } - db_printsym(addr, DB_STGY_PROC); - return; -} - -static void -obranch(int inst, char *opcode, long iadr) -{ - int cond = (inst >> 26) & 01; - int disp = inst & 0377777777; - - if (cond == 0) { - db_printf("\t%s\t\t", opcode); - symofset(disp, 26, iadr); - } else { - db_printf("\t%s.n\t\t", opcode); - symofset(disp, 26, iadr); - } -} - - -/* Handles branch on conditions instructions */ -static void -brcond(int inst, char *opcode, long iadr) -{ - int cond = (inst >> 26) & 1; - int match = (inst >> 21) & 037; - int rs = (inst >> 16) & 037; - int disp = (inst & 0177777); - - if (cond == 0) - db_printf("\t%s\t\t", opcode); - else - db_printf("\t%s.n\t\t", opcode); - if (((inst >> 27) & 03) == 1) - switch (match) { - case 1: - db_printf("%s,", condname[0]); - break; - case 2: - db_printf("%s,", condname[1]); - break; - case 3: - db_printf("%s,", condname[2]); - break; - case 12: - db_printf("%s,", condname[3]); - break; - case 13: - db_printf("%s,", condname[4]); - break; - case 14: - db_printf("%s,", condname[5]); - break; - default: - printval(match); - db_printf(","); - } - else { - printval(match); - db_printf(","); - } - - db_printf("r%-3d,", rs); - symofset(disp, 16, iadr); -} - - -static void -otrap(int inst, char *opcode, long iadr) -{ - int vecno = inst & 0777; - int match = (inst >> 21) & 037; - int rs = (inst >> 16) & 037; - - db_printf("\t%s\t", opcode); - if (((inst >> 12) & 017) == 0xe) - switch (match) { - case 1: - db_printf("%s,", condname[0]); - break; - case 2: - db_printf("%s,", condname[1]); - break; - case 3: - db_printf("%s,", condname[2]); - break; - case 12: - db_printf("%s,", condname[3]); - break; - case 13: - db_printf("%s,", condname[4]); - break; - case 14: - db_printf("%s,", condname[5]); - break; - default: - printval(match); - db_printf(","); - } - else { - printval(match); - db_printf(","); - } - db_printf("\tr%-3d,", rs); - printval(vecno); -} - - -/* Handles 10 bit immediate bit field operations */ -static void -obit(int inst, char *opcode, long iadr) -{ - int rs = (inst >> 16) & 037; - int rd = (inst >> 21) & 037; - int width = (inst >> 5) & 037; - int offset = (inst & 037); - - db_printf("\t%s\t\tr%-3d,r%-3d,", opcode, rd, rs); - if (((inst >> 10) & 077) == 052) { - db_printf("<"); - printval(offset); - db_printf(">"); - } else { - printval(width); - db_printf("<"); - printval(offset); - db_printf(">"); - } -} - - -/* Handles triadic mode bit field instructions */ -static void -bitman(int inst, char *opcode, long iadr) -{ - - int rs1 = (inst >> 16) & 037; - int rd = (inst >> 21) & 037; - int rs2 = inst & 037; - - db_printf("\t%s\t\tr%-3d,r%-3d,r%-3d", opcode, rd, rs1, rs2); -} - - -/* Handles immediate load/store/exchange instructions */ -static void -immem(int inst, char *opcode, long iadr) -{ - register int immed = inst & 0xFFFF; - register int rd = (inst >> 21) & 037; - register int rs = (inst >> 16) & 037; - register int st_lda = (inst >> 28) & 03; - register int aryno = (inst >> 26) & 03; - char c = ' '; - - if (!st_lda) { - if ((aryno == 0) || (aryno == 01)) - opcode = "xmem"; - else - opcode = "ld"; - if (aryno == 0) - aryno = 03; - if (!(aryno == 01)) - c = 'u'; - } else - if (st_lda == 01) - opcode = "ld"; - - db_printf("\t%s%s%c\t\tr%-3d,r%-3d,", opcode, instwidth[aryno], - c, rd, rs); - printval(immed); -} - - -/* Handles triadic mode load/store/exchange instructions */ -static void -nimmem(int inst, char *opcode, long iadr) -{ - register int scaled = (inst >> 9) & 01; - register int rd = (inst >> 21) & 037; - register int rs1 = (inst >> 16) & 037; - register int rs2 = inst & 037; - register int st_lda = (inst >> 12) & 03; - register int aryno = (inst >> 10) & 03; - register int user_bit = 0; - int signed_fg = 1; - char *user = " "; - char c = ' '; - - if (!st_lda) { - if ((aryno == 0) || (aryno == 01)) - opcode = "xmem"; - else - opcode = "ld"; - if (aryno == 0) - aryno = 03; - if (!(aryno == 01)) { - c = 'u'; - signed_fg = 0; - } - } else - if (st_lda == 01) - opcode = "ld"; - - if (!(st_lda == 03)) { - user_bit = (inst >> 8) & 01; - if (user_bit) - user = ".usr"; - } - if (user_bit && signed_fg && (aryno == 01)) { - if (st_lda) - db_printf("\t%s%s\tr%-3d,r%-3d", opcode, - user, rd, rs1); - else - db_printf("\t%s%s\tr%-3d,r%-3d", opcode, - user, rd, rs1); - } else - if (user_bit && signed_fg) - db_printf("\t%s%s%s\tr%-3d,r%-3d", opcode, - instwidth[aryno], user, rd, rs1); - else - db_printf("\t%s%s%c%s\tr%-3d,r%-3d", opcode, - instwidth[aryno], c, user, rd, rs1); - - if (scaled) - db_printf("[r%-3d]", rs2); - else - db_printf(",r%-3d", rs2); -} - - -/* Handles triadic mode logical instructions */ -static void -lognim(int inst, char *opcode, long iadr) -{ - register int rd = (inst >> 21) & 037; - register int rs1 = (inst >> 16) & 037; - register int rs2 = inst & 037; - register int complemt = (inst >> 10) & 01; - char *c = " "; - - if (complemt) - c = ".c"; - - db_printf("\t%s%s\t\tr%-3d,r%-3d,r%-3d", opcode, c, rd, rs1, rs2); -} - - -/* Handles triadic mode arithmetic instructions */ -static void -onimmed(int inst, char *opcode, long iadr) -{ - register int rd = (inst >> 21) & 037; - register int rs1 = (inst >> 16) & 037; - register int rs2 = inst & 037; - register int carry = (inst >> 8) & 03; - register int nochar = (inst >> 10) & 07; - register int nodecode = (inst >> 11) & 01; - char *tab, *c; - - if (nochar > 02) - tab = "\t\t"; - else - tab = "\t"; - - if (!nodecode) { - if (carry == 01) - c = ".co "; - else - if (carry == 02) - c = ".ci "; - else - if (carry == 03) - c = ".cio"; - else - c = " "; - } else - c = " "; - - db_printf("\t%s%s%sr%-3d,r%-3d,r%-3d", opcode, c, - tab, rd, rs1, rs2); -} - -static struct opdesc { - unsigned mask, match; - void (*opfun) (); - char *farg; -} opdecode[] = { - /* ORDER IS IMPORTANT BELOW */ - - { - 0xF0000000 U, 0x00000000 U, immem, 0, - } , - { - 0xF0000000 U, 0x10000000 U, immem, 0, - } , - { - 0xF0000000 U, 0x20000000 U, immem, "st" - } , - { - 0xF0000000 U, 0x30000000 U, immem, "lda" - } , - - { - 0xF8000000 U, 0x40000000 U, oimmed, "and" - } , - { - 0xF8000000 U, 0x48000000 U, oimmed, "mask" - } , - { - 0xF8000000 U, 0x50000000 U, oimmed, "xor" - } , - { - 0xF8000000 U, 0x58000000 U, oimmed, "or" - } , - { - 0xFC000000 U, 0x60000000 U, oimmed, "addu" - } , - { - 0xFC000000 U, 0x64000000 U, oimmed, "subu" - } , - { - 0xFC000000 U, 0x68000000 U, oimmed, "divu" - } , - { - 0xFC000000 U, 0x6C000000 U, oimmed, "mul" - } , - { - 0xFC000000 U, 0x70000000 U, oimmed, "add" - } , - { - 0xFC000000 U, 0x74000000 U, oimmed, "sub" - } , - { - 0xFC000000 U, 0x78000000 U, oimmed, "div" - } , - { - 0xFC000000 U, 0x7C000000 U, oimmed, "cmp" - } , - - { - 0xFC00F800 U, 0x80004000 U, ctrlregs, "ldcr" - } , - { - 0xFC00F800 U, 0x80004800 U, ctrlregs, "fldcr" - } , - { - 0xFC00F800 U, 0x80008000 U, ctrlregs, "stcr" - } , - { - 0xFC00F800 U, 0x80008800 U, ctrlregs, "fstcr" - } , - { - 0xFC00F800 U, 0x8000C000 U, ctrlregs, "xcr" - } , - { - 0xFC00F800 U, 0x8000C800 U, ctrlregs, "fxcr" - } , - - { - 0xFC00F800 U, 0x84000000 U, sindou, "fmul" - } , - { - 0xFC1FFF80 U, 0x84002000 U, sindou, "flt" - } , - { - 0xFC00F800 U, 0x84002800 U, sindou, "fadd" - } , - { - 0xFC00F800 U, 0x84003000 U, sindou, "fsub" - } , - { - 0xFC00F860 U, 0x84003800 U, sindou, "fcmp" - } , - { - 0xFC1FFE60 U, 0x84004800 U, sindou, "int" - } , - { - 0xFC1FFE60 U, 0x84005000 U, sindou, "nint" - } , - { - 0xFC1FFE60 U, 0x84005800 U, sindou, "trnc" - } , - { - 0xFC00F800 U, 0x84007000 U, sindou, "fdiv" - } , - - { - 0xF8000000 U, 0xC0000000 U, obranch, "br" - } , - { - 0xF8000000 U, 0xC8000000 U, obranch, "bsr" - } , - - { - 0xF8000000 U, 0xD0000000 U, brcond, "bb0" - } , - { - 0xF8000000 U, 0xD8000000 U, brcond, "bb1" - } , - { - 0xF8000000 U, 0xE8000000 U, brcond, "bcnd" - } , - - { - 0xFC00FC00 U, 0xF0008000 U, obit, "clr" - } , - { - 0xFC00FC00 U, 0xF0008800 U, obit, "set" - } , - { - 0xFC00FC00 U, 0xF0009000 U, obit, "ext" - } , - { - 0xFC00FC00 U, 0xF0009800 U, obit, "extu" - } , - { - 0xFC00FC00 U, 0xF000A000 U, obit, "mak" - } , - { - 0xFC00FC00 U, 0xF000A800 U, obit, "rot" - } , - - { - 0xFC00FE00 U, 0xF000D000 U, otrap, "tb0" - } , - { - 0xFC00FE00 U, 0xF000D800 U, otrap, "tb1" - } , - { - 0xFC00FE00 U, 0xF000E800 U, otrap, "tcnd" - } , - - { - 0xFC00F2E0 U, 0xF4000000 U, nimmem, 0, - } , - { - 0xFC00F2E0 U, 0xF4000200 U, nimmem, 0, - } , - { - 0xFC00F2E0 U, 0xF4001000 U, nimmem, 0, - } , - { - 0xFC00F2E0 U, 0xF4001200 U, nimmem, 0, - } , - { - 0xFC00F2E0 U, 0xF4002000 U, nimmem, "st" - } , - { - 0xFC00F2E0 U, 0xF4002200 U, nimmem, "st" - } , - { - 0xFC00F2E0 U, 0xF4003000 U, nimmem, "lda" - } , - { - 0xFC00F2E0 U, 0xF4003200 U, nimmem, "lda" - } , - - { - 0xFC00FBE0 U, 0xF4004000 U, lognim, "and" - } , - { - 0xFC00FBE0 U, 0xF4005000 U, lognim, "xor" - } , - { - 0xFC00FBE0 U, 0xF4005800 U, lognim, "or" - } , - - { - 0xFC00FCE0 U, 0xF4006000 U, onimmed, "addu" - } , - { - 0xFC00FCE0 U, 0xF4006400 U, onimmed, "subu" - } , - { - 0xFC00FCE0 U, 0xF4006800 U, onimmed, "divu" - } , - { - 0xFC00FCE0 U, 0xF4006C00 U, onimmed, "mul" - } , - { - 0xFC00FCE0 U, 0xF4007000 U, onimmed, "add" - } , - { - 0xFC00FCE0 U, 0xF4007400 U, onimmed, "sub" - } , - { - 0xFC00FCE0 U, 0xF4007800 U, onimmed, "div" - } , - { - 0xFC00FCE0 U, 0xF4007C00 U, onimmed, "cmp" - } , - - { - 0xFC00FFE0 U, 0xF4008000 U, bitman, "clr" - } , - { - 0xFC00FFE0 U, 0xF4008800 U, bitman, "set" - } , - { - 0xFC00FFE0 U, 0xF4009000 U, bitman, "ext" - } , - { - 0xFC00FFE0 U, 0xF4009800 U, bitman, "extu" - } , - { - 0xFC00FFE0 U, 0xF400A000 U, bitman, "mak" - } , - { - 0xFC00FFE0 U, 0xF400A800 U, bitman, "rot" - } , - - { - 0xFC00FBE0 U, 0xF400C000 U, jump, "jmp" - } , - { - 0xFC00FBE0 U, 0xF400C800 U, jump, "jsr" - } , - - { - 0xFC00FFE0 U, 0xF400E800 U, instset, "ff1" - } , - { - 0xFC00FFE0 U, 0xF400EC00 U, instset, "ff0" - } , - { - 0xFC00FFE0 U, 0xF400F800 U, instset, "tbnd" - } , - { - 0xFC00FFE0 U, 0xF400FC00 U, instset, "rte" - } , - { - 0xFC000000 U, 0xF8000000 U, instset, "tbnd" - } , - { - 0, 0, 0, 0 - } -}; - -static char *badop = "\t???"; - -int -m88k_print_instruction(unsigned iadr, long inst) -{ - register struct opdesc *p; - - /* this messes up "orb" instructions ever so slightly, */ - /* but keeps us in sync between routines... */ - if (inst == 0) { - db_printf("\t.word 0"); - } else { - for (p = opdecode; p->mask; p++) - if ((inst & p->mask) == p->match) { - (*p->opfun) (inst, p->farg, iadr); - break; - } - if (!p->mask) - db_printf(badop); - } - - return iadr + 4; -} -db_addr_t -db_disasm(db_addr_t loc, boolean_t altfmt) -{ - m88k_print_instruction(loc, db_get_value(loc, 4, FALSE)); - db_printf("\n"); - return loc + 4; -} diff --git a/sys/arch/mvme88k/ddb/db_interface.c b/sys/arch/mvme88k/ddb/db_interface.c deleted file mode 100644 index 6c18e1503d4..00000000000 --- a/sys/arch/mvme88k/ddb/db_interface.c +++ /dev/null @@ -1,834 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ - -/* - * m88k interface to ddb debugger - */ - -#include <sys/param.h> -#include <sys/proc.h> -#include <sys/reboot.h> -#include <sys/systm.h> /* just for boothowto --eichin */ -#include <setjmp.h> - -#include <vm/vm.h> - -#include <machine/m882xx.h> /* CMMU defs */ -#include <machine/trap.h> /* current_thread() */ -#include <machine/db_machdep.h> /* local ddb stuff */ -#include <machine/bug.h> /* bug routines */ -#include <machine/mmu.h> - -#include <ddb/db_command.h> -#include <ddb/db_sym.h> - -extern jmp_buf *db_recover; -extern unsigned int db_maxoff; - -int db_active = 0; -int db_noisy = 0; -int quiet_db_read_bytes = 0; - -/* - * Received keyboard interrupt sequence. - */ -kdb_kintr(regs) - register struct m88100_saved_state *regs; -{ - if (db_active == 0 && (boothowto & RB_KDB)) { - printf("\n\nkernel: keyboard interrupt\n"); - m88k_db_trap(-1, regs); - } -} -/************************/ -/* PRINTING *************/ -/************************/ - -static void -m88k_db_str(char *str) -{ - db_printf(str); -} - -static void -m88k_db_str1(char *str, int arg1) -{ - db_printf(str, arg1); -} - -static void -m88k_db_str2(char *str, int arg1, int arg2) -{ - db_printf(str, arg1, arg2); -} -/************************/ -/* DB_REGISTERS ****/ -/************************/ - -/* - * - * If you really feel like understanding the following procedure and - * macros, see pages 6-22 to 6-30 (Section 6.7.3) of - * - * MC881000 RISC Microprocessor User's Manual Second Edition - * (Motorola Order: MC88100UM/AD REV 1) - * - * and ERRATA-5 (6-23, 6-24, 6-24) of - * - * Errata to MC88100 User's Manual Second Edition MC88100UM/AD Rev 1 - * (Oct 2, 1990) - * (Motorola Order: MC88100UMAD/AD) - * - */ - -/* macros for decoding dmt registers */ - -#define XMEM(x) ((x) & (1<<12)) -#define XMEM_MODE(x) ((((x)>>2 & 0xf) == 0xf) ? "" : ".bu") -#define MODE(x) ((x)>>2 & 0xf) -#define DOUB(x) ((x) & (1<<13)) -#define SIGN(x) ((x) & (1<<6)) -#define DAS(x) (((x) & (1<<14)) ? "" : ".usr") -#define REG(x) (((x)>>7) & 0x1f) -#define STORE(x) ((x) & 0x2) - -/* - * return 1 if the printing of the next stage should be surpressed - */ -static int -m88k_dmx_print(unsigned t, unsigned d, unsigned a, unsigned no) -{ - static unsigned addr_mod[16] = {0, 3, 2, 2, 1, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0}; - static char *mode[16] = {"?", ".b", ".b", ".h", ".b", "?", "?", "?", - ".b", ".h", "?", "?", "?", "?", "?", ""}; - static unsigned mask[16] = {0, 0xff, 0xff00, 0xffff, - 0xff0000, 0, 0, 0, - 0xff000000 U, 0xffff0000 U, 0, 0, - 0, 0, 0, 0xffffffff U}; - static unsigned shift[16] = {0, 0, 8, 0, 16, 0, 0, 0, - 24, 16, 0, 0, 0, 0, 0, 0}; - int reg = REG(t); - - if (XMEM(t)) { - db_printf("xmem%s%s r%d(0x%x) <-> mem(0x%x),", - XMEM_MODE(t), DAS(t), reg, - (((t) >> 2 & 0xf) == 0xf) ? d : (d & 0xff), a); - return 1; - } else { - if (MODE(t) == 0xf) { - /* full or double word */ - if (STORE(t)) - if (DOUB(t) && no == 2) - db_printf("st.d%s -> mem(0x%x) (** restart sxip **)", - DAS(t), a); - else - db_printf("st%s (0x%x) -> mem(0x%x)", DAS(t), d, a); - else /* load */ - if (DOUB(t) && no == 2) - db_printf("ld.d%s r%d <- mem(0x%x), r%d <- mem(0x%x)", - DAS(t), reg, a, reg + 1, a + 4); - else - db_printf("ld%s r%d <- mem(0x%x)", DAS(t), reg, a); - } else { - /* fractional word - check if load or store */ - a += addr_mod[MODE(t)]; - if (STORE(t)) - db_printf("st%s%s (0x%x) -> mem(0x%x)", mode[MODE(t)], DAS(t), - (d & mask[MODE(t)]) >> shift[MODE(t)], a); - else - db_printf("ld%s%s%s r%d <- mem(0x%x)", - mode[MODE(t)], SIGN(t) ? "" : "u", DAS(t), reg, a); - } - } - return 0; -} - -static void -m88k_db_print_frame( - db_expr_t addr, - boolean_t have_addr, - int count, - char *modif) -{ - struct m88100_saved_state *s = (struct m88100_saved_state *) addr; - char *name; - db_expr_t offset; - int surpress1 = 0, surpress2 = 0; - int c, force = 0, help = 0; - - if (!have_addr) { - db_printf("requires address of frame\n"); - help = 1; - } - while (modif && *modif) { - switch (c = *modif++, c) { - case 'f': - force = 1; - break; - case 'h': - help = 1; - break; - default: - db_printf("unknown modifier [%c]\n", c); - help = 1; - break; - } - } - - if (help) { - db_printf("usage: mach frame/[f] ADDRESS\n"); - db_printf(" /f force printing of insane frames.\n"); - return; - } - if (badwordaddr((vm_offset_t) s) || - badwordaddr((vm_offset_t) (&((db_regs_t *) s)->mode))) { - db_printf("frame at 0x%08x is unreadable\n", s); - return; - } - if (!frame_is_sane(s)) {/* see db_trace.c */ - db_printf("frame seems insane ("); - - if (force) - db_printf("forging ahead anyway...)\n"); - else { - db_printf("use /f to force)\n"); - return; - } - } -#define R(i) s->r[i] -#define IPMASK(x) ((x) & ~(3)) - db_printf("R00-05: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", - R(0), R(1), R(2), R(3), R(4), R(5)); - db_printf("R06-11: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", - R(6), R(7), R(8), R(9), R(10), R(11)); - db_printf("R12-17: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", - R(12), R(13), R(14), R(15), R(16), R(17)); - db_printf("R18-23: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", - R(18), R(19), R(20), R(21), R(22), R(23)); - db_printf("R24-29: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", - R(24), R(25), R(26), R(27), R(28), R(29)); - db_printf("R30-31: 0x%08x 0x%08x\n", R(30), R(31)); - - db_printf("sxip: 0x%08x ", s->sxip); - db_find_xtrn_sym_and_offset((db_addr_t) IPMASK(s->sxip), &name, &offset); - if (name != 0 && (unsigned) offset <= db_maxoff) - db_printf("%s+0x%08x", name, (unsigned) offset); - db_printf("\n"); - if (s->snip != s->sxip + 4) { - db_printf("snip: 0x%08x ", s->snip); - db_find_xtrn_sym_and_offset((db_addr_t) IPMASK(s->snip), &name, &offset); - if (name != 0 && (unsigned) offset <= db_maxoff) - db_printf("%s+0x%08x", name, (unsigned) offset); - db_printf("\n"); - } - if (s->sfip != s->snip + 4) { - db_printf("sfip: 0x%08x ", s->sfip); - db_find_xtrn_sym_and_offset((db_addr_t) IPMASK(s->sfip), &name, &offset); - if (name != 0 && (unsigned) offset <= db_maxoff) - db_printf("%s+0x%08x", name, (unsigned) offset); - db_printf("\n"); - } - db_printf("vector: 0x%02x interrupt mask: 0x%08x\n", - s->vector, s->mask >> 8); - db_printf("epsr: 0x%08x current process: 0x%x\n", - s->epsr, curproc); - - /* - * If the vector indicates trap, instead of an exception or - * interrupt, skip the check of dmt and fp regs. - * - * Interrupt and exceptions are vectored at 0-10 and 114-127. - */ - - if (!(s->vector <= 10 || (114 <= s->vector && s->vector <= 127))) { - db_printf("\n\n"); - return; - } - if (s->vector == /* data */ 3 || s->dmt0 & 1) { - db_printf("dmt,d,a0: 0x%08x 0x%08x 0x%08x ", s->dmt0, s->dmd0, s->dma0); - db_find_xtrn_sym_and_offset((db_addr_t) s->dma0, &name, &offset); - if (name != 0 && (unsigned) offset <= db_maxoff) - db_printf("%s+0x%08x", name, (unsigned) offset); - db_printf("\n "); - surpress1 = m88k_dmx_print(s->dmt0 | 0x01, s->dmd0, s->dma0, 0); - db_printf("\n"); - - if ((s->dmt1 & 1) && (!surpress1)) { - db_printf("dmt,d,a1: 0x%08x 0x%08x 0x%08x ", s->dmt1, s->dmd1, s->dma1); - db_find_xtrn_sym_and_offset((db_addr_t) s->dma1, &name, &offset); - if (name != 0 && (unsigned) offset <= db_maxoff) - db_printf("%s+0x%08x", name, (unsigned) offset); - db_printf("\n "); - surpress2 = m88k_dmx_print(s->dmt1, s->dmd1, s->dma1, 1); - db_printf("\n"); - - if ((s->dmt2 & 1) && (!surpress2)) { - db_printf("dmt,d,a2: 0x%08x 0x%08x 0x%08x ", s->dmt2, s->dmd2, s->dma2); - db_find_xtrn_sym_and_offset((db_addr_t) s->dma2, &name, &offset); - if (name != 0 && (unsigned) offset <= db_maxoff) - db_printf("%s+0x%08x", name, (unsigned) offset); - db_printf("\n "); - (void) m88k_dmx_print(s->dmt2, s->dmd2, s->dma2, 2); - db_printf("\n"); - } - } - } - if (s->fpecr & 255) { /* floating point error occured */ - db_printf("fpecr: 0x%08x fpsr: 0x%08x fpcr: 0x%08x\n", - s->fpecr, s->fpsr, s->fpcr); - db_printf("fcr1-4: 0x%08x 0x%08x 0x%08x 0x%08x\n", - s->fphs1, s->fpls1, s->fphs2, s->fpls2); - db_printf("fcr5-8: 0x%08x 0x%08x 0x%08x 0x%08x\n", - s->fppt, s->fprh, s->fprl, s->fpit); - } - db_printf("\n\n"); -} - -static void -m88k_db_registers( - db_expr_t addr, - boolean_t have_addr, - int count, - char *modif) -{ - if (modif && *modif) { - db_printf("usage: mach regs\n"); - return; - } - m88k_db_print_frame((db_expr_t) DDB_REGS, TRUE, 0, 0); - return; -} -/************************/ -/* PAUSE ****************/ -/************************/ - -/* - * pause for 2*ticks many cycles - */ -static void -m88k_db_pause(unsigned volatile ticks) -{ - while (ticks) - ticks -= 1; - return; -} -/* - * m88k_db_trap - field a TRACE or BPT trap - */ - -m88k_db_trap( - int type, - register struct m88100_saved_state * regs) -{ - - int i; - -#if 0 - if ((i = db_spl()) != 7) - m88k_db_str1("WARNING: spl is not high in m88k_db_trap (spl=%x)\n", i); -#endif /* 0 */ - - if (db_are_interrupts_disabled()) - m88k_db_str("WARNING: entered debugger with interrupts disabled\n"); - - switch (type) { - - case T_KDB_BREAK: - case T_KDB_TRACE: - case T_KDB_ENTRY: - break; - case -1: - break; - default: - kdbprinttrap(type, 0); - if (db_recover != 0) { - db_error("Caught exception in ddb.\n"); - /* NOTREACHED */ - } - } - - ddb_regs = *regs; - - db_active++; - cnpollc(TRUE); - db_trap(type, 0); - cnpollc(FALSE); - db_active--; - - *regs = ddb_regs; - -#if 0 - (void) spl7(); -#endif - return (1); -} - -extern char *trap_type[]; -extern int trap_types; - -/* - * Print trap reason. - */ -kdbprinttrap(type, code) - int type, code; -{ - printf("kernel: "); - if (type >= trap_types || type < 0) - printf("type %d", type); - else - printf("%s", trap_type[type]); - printf(" trap\n"); -} - -int -Debugger() -{ - asm(ENTRY_ASM); /* entry trap */ - /* ends up at ddb_entry_trap below */ -} - -/* gimmeabreak - drop execute the ENTRY trap */ -void -gimmeabreak(void) -{ - asm(ENTRY_ASM); /* entry trap */ - /* ends up at ddb_entry_trap below */ -} - -/* fielded a non maskable interrupt */ -int -ddb_nmi_trap(int level, db_regs_t * eframe) -{ - NOISY(m88k_db_str("kernel: nmi interrupt\n");) - m88k_db_trap(T_KDB_ENTRY, eframe); - return 0; -} - -/* - * When the below routine is entered interrupts should be on - * but spl should be high - * - * The following routine is for breakpoint and watchpoint entry. - */ - -/* breakpoint/watchpoint entry */ -int -ddb_break_trap(type, eframe) - int type; - db_regs_t *eframe; -{ - m88k_db_trap(type, eframe); - - if (type == T_KDB_BREAK) { - /* back up an instruction and retry the instruction at the - * breakpoint address */ - eframe->sfip = eframe->snip; - eframe->snip = eframe->sxip; - } - return 0; -} - -/* enter at splhigh */ -int -ddb_entry_trap(level, eframe) - int level; - db_regs_t *eframe; -{ - m88k_db_trap(T_KDB_ENTRY, eframe); - return 0; -} - -/* - * When the below routine is entered interrupts should be on - * but spl should be high - */ -/* error trap - unreturnable */ -void -ddb_error_trap(error, eframe) - char *error; - db_regs_t *eframe; -{ - m88k_db_str1("KERNEL: terminal error [%s]\n", (int) error); - m88k_db_str("KERNEL: Exiting debugger will cause abort to rom\n"); - m88k_db_str1("at 0x%x ", eframe->sxip & ~3); - m88k_db_str2("dmt0 0x%x dma0 0x%x", eframe->dmt0, eframe->dma0); - m88k_db_pause(1000000); - m88k_db_trap(T_KDB_BREAK, eframe); -} - -/* - * Read bytes from kernel address space for debugger. - */ -void -db_read_bytes(addr, size, data) - vm_offset_t addr; - register int size; - register char *data; -{ - register char *src; - - src = (char *) addr; - - while (--size >= 0) - *data++ = *src++; -} - -/* - * Write bytes to kernel address space for debugger. - * This should make a text page writable to be able - * to plant a break point (right now text is mapped with - * write access in pmap_bootstrap()). XXX nivas - */ -void -db_write_bytes(addr, size, data) - char *addr; - int size; - char *data; -{ - - register char *dst; - int i = size; - vm_offset_t physaddr; - pte_template_t *pte; - - dst = (char *) addr; - - while (--size >= 0) { -#if 0 - db_printf("byte %x\n", *data); -#endif /* 0 */ - *dst++ = *data++; - } - physaddr = pmap_extract(kernel_pmap, (vm_offset_t) addr); - cmmu_flush_cache(physaddr, i); -} - -/* to print a character to the console */ -void -db_putc(int c) -{ - bugoutchr(c & 0xff); -} - -/* to peek at the console; returns -1 if no character is there */ -int -db_getc(void) -{ - if (buginstat()) - return (buginchr()); - else - return -1; -} - -/* display where all the cpus are stopped at */ -static void -m88k_db_where(void) -{ - struct m88100_saved_state *s; - char *name; - int *offset; - int i; - int l; - - s = DDB_REGS; - - l = m88k_pc(s); /* clear low bits */ - - db_find_xtrn_sym_and_offset((db_addr_t) l, &name, (db_expr_t *) & offset); - if (name && (unsigned) offset <= db_maxoff) - db_printf("stopped at 0x%x (%s+0x%x)\n", - l, name, offset); - else - db_printf("stopped at 0x%x\n", l); -} - -/* - * Walk back a stack, looking for exception frames. - * These frames are recognized by the routine frame_is_sane. Frames - * only start with zero, so we only call frame_is_sane if the - * current address contains zero. - * - * If addr is given, it is assumed to an address on the stack to be - * searched. Otherwise, r31 of the current cpu is used. - */ -static void -m88k_db_frame_search(db_expr_t addr, boolean_t have_addr) -{ -#if 1 - db_printf("sorry, frame search currently disabled.\n"); -#else - if (have_addr) - addr &= ~3; /* round to word */ - else - addr = (DDB_REGS->r[31]); - - /* walk back up stack until 8k boundry, looking for 0 */ - while (addr & ((8 * 1024) - 1)) { - int i; - db_read_bytes(addr, 4, &i); - if (i == 0 && frame_is_sane(i)) - db_printf("frame found at 0x%x\n", i); - addr += 4; - } - - db_printf("(Walked back until 0x%x)\n", addr); -#endif -} -/* flush icache */ -static void -m88k_db_iflush(db_expr_t addr, boolean_t have_addr) -{ - addr = 0; - cmmu_remote_set(addr, CMMU_SCR, 0, CMMU_FLUSH_CACHE_CBI_ALL); -} -/* flush dcache */ - -static void -m88k_db_dflush(db_expr_t addr, boolean_t have_addr) -{ - addr = 0; - - cmmu_remote_set(addr, CMMU_SCR, 1, CMMU_FLUSH_CACHE_CBI_ALL); -} -/* probe my cache */ -static void -m88k_db_peek( - db_expr_t addr, - boolean_t have_addr, - int count, - char *modif) -{ - int pa12; - int valmask; - - pa12 = addr & ~((1 << 12) - 1); - - /* probe dcache */ - cmmu_remote_set(0, CMMU_SAR, 1, addr); - - valmask = cmmu_remote_get(0, CMMU_CSSP, 1); - db_printf("dcache valmask 0x%x\n", (unsigned) valmask); - db_printf("dcache tag ports 0x%x 0x%x 0x%x 0x%x\n", - (unsigned) cmmu_remote_get(0, CMMU_CTP0, 1), - (unsigned) cmmu_remote_get(0, CMMU_CTP1, 1), - (unsigned) cmmu_remote_get(0, CMMU_CTP2, 1), - (unsigned) cmmu_remote_get(0, CMMU_CTP3, 1)); - - /* probe icache */ - cmmu_remote_set(0, CMMU_SAR, 0, addr); - - valmask = cmmu_remote_get(0, CMMU_CSSP, 0); - db_printf("icache valmask 0x%x\n", (unsigned) valmask); - db_printf("icache tag ports 0x%x 0x%x 0x%x 0x%x\n", - (unsigned) cmmu_remote_get(0, CMMU_CTP0, 0), - (unsigned) cmmu_remote_get(0, CMMU_CTP1, 0), - (unsigned) cmmu_remote_get(0, CMMU_CTP2, 0), - (unsigned) cmmu_remote_get(0, CMMU_CTP3, 0)); - -} - - -/* - * control how much info the debugger prints about itself - */ -static void -m88k_db_noise(db_expr_t addr, boolean_t have_addr) -{ - if (!have_addr) { - /* if off make noisy; if noisy or very noisy turn off */ - if (db_noisy) { - db_printf("changing debugger status from %s to quiet\n", - db_noisy == 1 ? "noisy" : - db_noisy == 2 ? "very noisy" : "violent"); - db_noisy = 0; - } else { - db_printf("changing debugger status from quiet to noisy\n"); - db_noisy = 1; - } - } else - if (addr < 0 || addr > 3) - db_printf("invalid noise level to m88k_db_noisy; should be 0, 1, 2, or 3\n"); - else { - db_noisy = addr; - db_printf("debugger noise level set to %s\n", - db_noisy == 0 ? "quiet" : - (db_noisy == 1 ? "noisy" : - db_noisy == 2 ? "very noisy" : "violent")); - } -} -/* - * See how a virtual address translates. - * Must have an address. - */ -static void -m88k_db_translate( - db_expr_t addr, - boolean_t have_addr, - unsigned count, - char *modif) -{ -#if 0 - char c; - int verbose_flag = 0; - int supervisor_flag = 1; - int wanthelp = 0; - - if (!have_addr) - wanthelp = 1; - else { - while (c = *modif++, c != 0) { - switch (c) { - default: - db_printf("bad modifier [%c]\n", c); - wanthelp = 1; - break; - case 'h': - wanthelp = 1; - break; - case 'v': - verbose_flag++; - break; - case 's': - supervisor_flag = 1; - break; - case 'u': - supervisor_flag = 0; - break; - } - } - } - if (wanthelp) { - db_printf("usage: translate[/vvsu] address\n"); - db_printf("flags: v - be verbose (vv - be very verbose)\n"); - db_printf(" s - use cmmu's supervisor area pointer (default)\n"); - db_printf(" u - use cmmu's user area pointer\n"); - return; - } - cmmu_show_translation(addr, supervisor_flag, verbose_flag); -#endif /* 0 */ -} - -void -cpu_interrupt_to_db(int cpu_no) -{ -} - - -/************************/ -/* COMMAND TABLE / INIT */ -/************************/ - -static struct db_command m88k_cache_cmds[] = -{ - {"iflush", m88k_db_iflush, 0, 0}, - {"dflush", m88k_db_dflush, 0, 0}, - {"peek", m88k_db_peek, 0, 0}, - {(char *) 0,} -}; - -struct db_command db_machine_cmds[] = -{ - {"cache", 0, 0, m88k_cache_cmds}, - {"frame", m88k_db_print_frame, 0, 0}, - {"noise", m88k_db_noise, 0, 0}, - {"regs", m88k_db_registers, 0, 0}, - {"searchframe", m88k_db_frame_search, 0, 0}, - {"translate", m88k_db_translate, 0, 0}, - {"where", m88k_db_where, 0, 0}, - {(char *) 0,} -}; -/* - * Called from "m88k/m1x7_init.c" - */ -void -kdb_init(void) -{ -#ifdef DB_MACHINE_COMMANDS - db_machine_commands_install(db_machine_cmds); -#endif - ddb_init(); - - db_printf("ddb enabled\n"); -} -/* - * Attempt to figure out the UX name of the task. - * This is kludgy at best... we can't even be sure the task is a UX task... - */ -#define TOP_OF_USER_STACK USRSTACK -#define MAX_DISTANCE_TO_LOOK (1024 * 10) - -#define DB_TASK_NAME_LEN 50 - -char - * -db_task_name() -{ - static unsigned buffer[(DB_TASK_NAME_LEN + 5) / sizeof(unsigned)]; - unsigned ptr = (vm_offset_t) (TOP_OF_USER_STACK - 4); - unsigned limit = ptr - MAX_DISTANCE_TO_LOOK; - unsigned word; - int i; - - /* skip zeros at the end */ - while (ptr > limit && - (i = db_trace_get_val((vm_offset_t) ptr, &word)) - && (word == 0)) { - ptr -= 4; /* continue looking for a non-null word */ - } - - if (ptr <= limit) { - db_printf("bad name at line %d\n", __LINE__); - return "<couldn't find 1>"; - } else - if (i != 1) { - return "<nostack>"; - } - /* skip looking for null before all the text */ - while (ptr > limit - && (i = db_trace_get_val(ptr, &word)) - && (word != 0)) { - ptr -= 4; /* continue looking for a null word */ - } - - if (ptr <= limit) { - db_printf("bad name at line %d\n", __LINE__); - return "<couldn't find 2>"; - } else - if (i != 1) { - db_printf("bad name read of %x " - "at line %d\n", ptr, __LINE__); - return "<bad read 2>"; - } - ptr += 4; /* go back to the non-null word after this one */ - - for (i = 0; i < sizeof(buffer); i++, ptr += 4) { - buffer[i] = 0; /* just in case it's not read */ - db_trace_get_val((vm_offset_t) ptr, &buffer[i]); - } - return (char *) buffer; -} diff --git a/sys/arch/mvme88k/ddb/db_sstep.c b/sys/arch/mvme88k/ddb/db_sstep.c deleted file mode 100644 index 373ff40c109..00000000000 --- a/sys/arch/mvme88k/ddb/db_sstep.c +++ /dev/null @@ -1,256 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ - -#include <machine/db_machdep.h> -#include <ddb/db_access.h> /* db_get_value() */ - -/* - * Support routines for software single step. - * - * Author: Daniel Stodolsky (danner@cs.cmu.edu) - * - */ - -/* is the instruction a branch or jump instruction (br, bb0, bb1, bcnd, jmp) - but not a function call (bsr or jsr) */ - -boolean_t -inst_branch(unsigned ins) -{ - /* check high five bits */ - - switch (ins >> (32 - 5)) { - case 0x18: /* br */ - case 0x1a: /* bb0 */ - case 0x1b: /* bb1 */ - case 0x1d: /* bcnd */ - return TRUE; - break; - case 0x1e: /* could be jmp */ - if ((ins & 0xfffffbe0 U) == 0xf400c000 U) - return TRUE; - } - - return FALSE; -} -/* inst_load(ins) - returns the number of words the instruction loads. byte, - half and word count as 1; double word as 2 */ - -unsigned -inst_load(unsigned ins) -{ - /* look at the top six bits, for starters */ - - switch (ins >> (32 - 6)) { - case 0x0: /* xmem byte imm */ - case 0x1: /* xmem word imm */ - - case 0x2: /* unsigned half-word load imm */ - case 0x3: /* unsigned byte load imm */ - case 0x5: /* signed word load imm */ - case 0x6: /* signed half-word load imm */ - case 0x7: /* signed byte load imm */ - return 1; - - case 0x4: /* signed double word load imm */ - return 2; - - case 0x3d: /* load/store/xmem scaled/unscaled instruction */ - if ((ins & 0xf400c0e0 U) == 0xf4000000 U) /* is load/xmem */ - switch ((ins & 0x0000fce0) >> 5) { /* look at bits 15-5, - * but mask bits 8-9 */ - case 0x0: /* xmem byte */ - case 0x1: /* xmem word */ - case 0x2: /* unsigned half word */ - case 0x3: /* unsigned byte load */ - case 0x5: /* signed word load */ - case 0x6: /* signed half-word load */ - case 0x7: /* signed byte load */ - return 1; - - case 0x4: /* signed double word load */ - return 2; - } /* end switch load/xmem */ - break; - } /* end switch 32-6 */ - - return 0; -} -/* inst_store - like inst_load, except for store instructions. */ - -unsigned -inst_store(unsigned ins) -{ - /* decode top 6 bits again */ - switch (ins >> (32 - 6)) { - case 0x0: /* xmem byte imm */ - case 0x1: /* xmem word imm */ - case 0x9: /* store word imm */ - case 0xa: /* store half-word imm */ - case 0xb: /* store byte imm */ - return 1; - - case 0x8: /* store double word */ - return 2; - case 0x3d: /* load/store/xmem scaled/unscaled instruction */ - /* check bits 15,14,12,7,6,5 are all 0 */ - if ((ins & 0x0000d0e0 U) == 0) - switch ((ins & 0x00003c00 U) >> 10) { /* decode bits 10-13 */ - case 0x0: /* xmem byte imm */ - case 0x1: /* xmem word imm */ - case 0x9: /* store word */ - case 0xa: /* store half-word */ - case 0xb: /* store byte */ - return 1; - - case 0x8: /* store double word */ - return 2; - } /* end switch store/xmem */ - break; - } /* end switch 32-6 */ - - return 0; -} -/* inst_delayed - this instruction is followed by a delay slot. Could be - br.n, bsr.n bb0.n, bb1.n, bcnd.n or jmp.n or jsr.n */ - -boolean_t -inst_delayed(unsigned ins) -{ - /* check the br, bsr, bb0, bb1, bcnd cases */ - switch ((ins & 0xfc000000 U) >> (32 - 6)) { - case 0x31: /* br */ - case 0x33: /* bsr */ - case 0x35: /* bb0 */ - case 0x37: /* bb1 */ - case 0x3b: /* bcnd */ - return TRUE; - } - - /* check the jmp, jsr cases */ - /* mask out bits 0-4, bit 11 */ - return ((ins & 0xfffff7e0 U) == 0xf400c400 U) ? TRUE : FALSE; -} - - -/* - * next_instr_address(pc,delay_slot,task) has the following semantics. - * Let inst be the instruction at pc. - * If delay_slot = 1, next_instr_address should return - * the address of the instruction in the delay slot; if this instruction - * does not have a delay slot, it should return pc. - * If delay_slot = 0, next_instr_address should return the - * address of next sequential instruction, or pc if the instruction is - * followed by a delay slot. - * - * 91-11-28 jfriedl: I think the above is wrong. I think it should be: - * if delay_slot true, return address of the delay slot if there is one, - * return pc otherwise. - * if delay_slot false, return (pc + 4) regardless. - * - */ -db_addr_t -next_instr_address(db_addr_t pc, unsigned delay_slot) -{ - if (delay_slot == 0) - return pc + 4; - else { - if (inst_delayed(db_get_value(pc, sizeof(int), FALSE))) - return pc + 4; - else - return pc; - } -} - - -/* - * branch_taken(instruction, program counter, func, func_data) - * - * instruction will be a control flow instruction location at address pc. - * Branch taken is supposed to return the address to which the instruction - * would jump if the branch is taken. Func can be used to get the current - * register values when invoked with a register number and func_data as - * arguments. - * - * If the instruction is not a control flow instruction, panic. - */ -unsigned -branch_taken( - unsigned inst, - unsigned pc, - db_expr_t(*func) (unsigned int, db_regs_t *), - db_regs_t * func_data) -{ /* 'opaque' */ - - /* check if br/bsr */ - if ((inst & 0xf0000000 U) == 0xc0000000 U) { - /* signed 26 bit pc relative displacement, shift left two bits */ - inst = (inst & 0x03ffffff U) << 2; - /* check if sign extension is needed */ - if (inst & 0x08000000 U) - inst |= 0xf0000000 U; - return pc + inst; - } - /* check if bb0/bb1/bcnd case */ - switch ((inst & 0xf8000000 U)) { - case 0xd0000000 U: /* bb0 */ - case 0xd8000000 U: /* bb1 */ - case 0xe8000000 U: /* bcnd */ - /* signed 16 bit pc relative displacement, shift left two bits */ - inst = (inst & 0x0000ffff U) << 2; - /* check if sign extension is needed */ - if (inst & 0x00020000 U) - inst |= 0xfffc0000 U; - return pc + inst; - } - - /* check jmp/jsr case */ - /* check bits 5-31, skipping 10 & 11 */ - if ((inst & 0xfffff3e0 U) == 0xf400c000 U) - return (*func) (inst & 0x1f, func_data); /* the register value */ - - panic("branch_taken"); - return 0; /* keeps compiler happy */ -} -/* - * getreg_val - handed a register number and an exception frame. - * Returns the value of the register in the specified - * frame. Only makes sense for general registers. - */ -db_expr_t -getreg_val(unsigned regno, db_regs_t * frame) -{ - if (regno == 0) - return 0; - else - if (regno < 31) - return frame->r[regno]; - else { - panic("bad register number to getreg_val."); - return 0; /* to make compiler happy */ - } -} diff --git a/sys/arch/mvme88k/ddb/db_trace.c b/sys/arch/mvme88k/ddb/db_trace.c deleted file mode 100644 index 70336eeedab..00000000000 --- a/sys/arch/mvme88k/ddb/db_trace.c +++ /dev/null @@ -1,1221 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ - -union instruction { - unsigned rawbits; - - struct { - unsigned int:5; - unsigned int n:1; - signed int d26:26; - } br; - - struct { - unsigned int:4; - unsigned int isbb1:1; /* isbb1==0 means bb0, isbb1==1 means - * bb1 */ - unsigned int n:1; - unsigned int b5:5; - unsigned int s1:5; - signed int d16:16; - } bb; /* bcnd too, except "isbb1" makes no sense for - * bcnd */ - - struct { - unsigned int:6; - unsigned int b5:5; - unsigned int s1:5; - unsigned int:7; - unsigned int vec9:9; - } tb; /* tcnd too */ - - struct { - unsigned int:21; - unsigned int n:1; - unsigned int:5; - unsigned int s2:5; - } jump; /* jmp, jsr */ - - struct { - unsigned int:6; - unsigned int d:5; - unsigned int s1:5; - unsigned int i16:16; - } diatic; /* general reg/reg/i16 instructions */ - - struct { - unsigned int:6; - unsigned int d:5; - unsigned int s1:5; - unsigned int:11; - unsigned int s2:5; - } triatic; /* general reg/reg/reg instructions */ - -}; - -static inline unsigned -br_dest(unsigned addr, union instruction inst) -{ - return addr + inst.br.d26 * 4; -} - - -#define TRACE_DEBUG /* undefine to disable debugging */ - -#include <machine/db_machdep.h> /* lots of stuff */ -#include <setjmp.h> /* jmp_buf, etc. */ -#include <ddb/db_variables.h> /* db_variable, DB_VAR_GET, etc. */ -#include <ddb/db_output.h> /* db_printf */ -#include <ddb/db_sym.h> /* DB_STGY_PROC, etc. */ -#include <ddb/db_command.h> /* db_recover */ - -/* - * Some macros to tell if the given text is the instruction. - */ -#define JMPN_R1(I) ( (I) == 0xf400c401U) /* jmp.n r1 */ -#define JMP_R1(I) ( (I) == 0xf400c001U) /* jmp r1 */ - -/* gets the IMM16 value from an instruction */ -#define IMM16VAL(I) (((union instruction)(I)).diatic.i16) - -/* subu r31, r31, IMM */ -#define SUBU_R31_R31_IMM(I) (((I) & 0xffff0000U) == 0x67ff0000U) - -/* st r1, r31, IMM */ -#define ST_R1_R31_IMM(I) (((I) & 0xffff0000U) == 0x243f0000U) - -static trace_flags = 0; -#define TRACE_DEBUG_FLAG 0x01 -#define TRACE_SHOWCALLPRESERVED_FLAG 0x02 -#define TRACE_SHOWADDRESS_FLAG 0x04 -#define TRACE_SHOWFRAME_FLAG 0x08 -#define TRACE_USER_FLAG 0x10 - -#ifdef TRACE_DEBUG -#define DEBUGGING_ON (trace_flags & TRACE_DEBUG_FLAG) -#endif - -#ifndef TRACE_DEBUG -#define SHOW_INSTRUCTION(Addr, Inst, Note) { /*nothing*/ } -#else -#define SHOW_INSTRUCTION(Addr, Inst, Note) if (DEBUGGING_ON) { \ - db_printf("%s0x%x: (0x%08x) ", Note, (unsigned)(Addr), (Inst)); \ - m88k_print_instruction((unsigned)(Addr), (Inst)); \ - db_printf("\n"); \ - } -#endif - -extern jmp_buf *db_recover; -extern int quiet_db_read_bytes; -/* - * m88k trace/register state interface for ddb. - */ - -/* lifted from mips */ -static int -db_setf_regs( - struct db_variable * vp, - db_expr_t * valuep, - int op) -{ /* read/write */ - register int *regp = (int *) ((char *) DDB_REGS + (int) (vp->valuep)); - - if (op == DB_VAR_GET) - *valuep = *regp; - else - if (op == DB_VAR_SET) - *regp = *valuep; -} -#define N(s, x) {s, (int *)&(((db_regs_t *) 0)->x), db_setf_regs} - -struct db_variable db_regs[] = { - N("r1", r[1]), N("r2", r[2]), N("r3", r[3]), N("r4", r[4]), - N("r5", r[5]), N("r6", r[6]), N("r7", r[7]), N("r8", r[8]), - N("r9", r[9]), N("r10", r[10]), N("r11", r[11]), N("r12", r[12]), - N("r13", r[13]), N("r14", r[14]), N("r15", r[15]), N("r16", r[16]), - N("r17", r[17]), N("r18", r[18]), N("r19", r[19]), N("r20", r[20]), - N("r21", r[21]), N("r22", r[22]), N("r23", r[23]), N("r24", r[24]), - N("r25", r[25]), N("r26", r[26]), N("r27", r[27]), N("r28", r[28]), - N("r29", r[29]), N("r30", r[30]), N("r31", r[31]), N("epsr", epsr), - N("sxip", sxip), N("snip", snip), N("sfip", sfip), N("ssbr", ssbr), - N("dmt0", dmt0), N("dmd0", dmd0), N("dma0", dma0), N("dmt1", dmt1), - N("dmd1", dmd1), N("dma1", dma1), N("dmt2", dmt2), N("dmd2", dmd2), - N("dma2", dma2), N("fpecr", fpecr), N("fphs1", fphs1), N("fpls1", fpls1), - N("fphs2", fphs2), N("fpls2", fpls2), N("fppt", fppt), N("fprh", fprh), - N("fprl", fprl), N("fpit", fpit), N("fpsr", fpsr), N("fpcr", fpcr), - N("mask", mask), /* interrupt mask */ - N("mode", mode), /* interrupt mode */ - N("exvc", vector), /* exception vector */ -}; -#undef N - -struct db_variable *db_eregs = db_regs + sizeof(db_regs) / sizeof(db_regs[0]); - - -#define TRASHES 0x001 /* clobbers instruction field D */ -#define STORE 0x002 /* does a store to S1+IMM16 */ -#define LOAD 0x004 /* does a load from S1+IMM16 */ -#define DOUBLE 0x008 /* double-register */ -#define FLOW_CTRL 0x010 /* flow-control instruction */ -#define DELAYED 0x020 /* delayed flow control */ -#define JSR 0x040 /* flow-control is a jsr[.n] */ -#define BSR 0x080 /* flow-control is a bsr[.n] */ - -/* - * Given a word of instruction text, return some flags about that - * instruction (flags defined above). - */ -static unsigned -m88k_instruction_info(unsigned instruction) -{ - static struct { - unsigned mask, value, flags; - } *ptr, control[] = - { - /* runs in the same order as 2nd Ed 88100 manual Table 3-14 */ - { - 0xf0000000 U, 0x00000000 U, /* xmem */ TRASHES | STORE | LOAD - } , - { - 0xec000000 U, 0x00000000 U, /* ld.d */ TRASHES | LOAD | DOUBLE - } , - { - 0xe0000000 U, 0x00000000 U, /* load */ TRASHES | LOAD - } , - { - 0xfc000000 U, 0x20000000 U, /* st.d */ STORE | DOUBLE - } , - { - 0xf0000000 U, 0x20000000 U, /* store */ STORE - } , - { - 0xc0000000 U, 0x40000000 U, /* arith */ TRASHES - } , - { - 0xfc004000 U, 0x80004000 U, /* ld cr */ TRASHES - } , - { - 0xfc004000 U, 0x80000000 U, /* st cr */ 0 - } , - { - 0xfc008060 U, 0x84000000 U, /* f */ TRASHES - } , - { - 0xfc008060 U, 0x84000020 U, /* f.d */ TRASHES | DOUBLE - } , - { - 0xfc000000 U, 0xcc000000 U, /* bsr.n */ FLOW_CTRL | DELAYED | BSR - } , - { - 0xfc000000 U, 0xc8000000 U, /* bsr */ FLOW_CTRL | BSR - } , - { - 0xe4000000 U, 0xc4000000 U, /* br/bb.n */ FLOW_CTRL | DELAYED - } , - { - 0xe4000000 U, 0xc0000000 U, /* br/bb */ FLOW_CTRL - } , - { - 0xfc000000 U, 0xec000000 U, /* bcnd.n */ FLOW_CTRL | DELAYED - } , - { - 0xfc000000 U, 0xe8000000 U, /* bcnd */ FLOW_CTRL - } , - { - 0xfc00c000 U, 0xf0008000 U, /* bits */ TRASHES - } , - { - 0xfc00c000 U, 0xf000c000 U, /* trap */ 0 - } , - { - 0xfc00f0e0 U, 0xf4002000 U, /* st */ 0 - } , - { - 0xfc00cce0 U, 0xf4000000 U, /* ld.d */ TRASHES | DOUBLE - } , - { - 0xfc00c0e0 U, 0xf4000000 U, /* ld */ TRASHES - } , - { - 0xfc00c0e0 U, 0xf4004000 U, /* arith */ TRASHES - } , - { - 0xfc00c3e0 U, 0xf4008000 U, /* bits */ TRASHES - } , - { - 0xfc00ffe0 U, 0xf400cc00 U, /* jsr.n */ FLOW_CTRL | DELAYED | JSR - } , - { - 0xfc00ffe0 U, 0xf400c800 U, /* jsr */ FLOW_CTRL | JSR - } , - { - 0xfc00ffe0 U, 0xf400c400 U, /* jmp.n */ FLOW_CTRL | DELAYED - } , - { - 0xfc00ffe0 U, 0xf400c000 U, /* jmp */ FLOW_CTRL - } , - { - 0xfc00fbe0 U, 0xf400e800 U, /* ff */ TRASHES - } , - { - 0xfc00ffe0 U, 0xf400f800 U, /* tbnd */ 0 - } , - { - 0xfc00ffe0 U, 0xf400fc00 U, /* rte */ FLOW_CTRL - } , - { - 0xfc000000 U, 0xf8000000 U, /* tbnd */ 0 - } , - }; -#define ctrl_count (sizeof(control)/sizeof(control[0])) - for (ptr = &control[0]; ptr < &control[ctrl_count]; ptr++) - if ((instruction & ptr->mask) == ptr->value) - return ptr->flags; - SHOW_INSTRUCTION(0, instruction, "bad m88k_instruction_info"); - return 0; -} - -static int -hex_value_needs_0x(unsigned value) -{ - int i; - unsigned last = 0; - unsigned char c; - unsigned have_a_hex_digit = 0; - - if (value <= 9) - return 0; - - for (i = 0; i < 8; i++) { - c = value & 0xf; - value >>= 4; - if (c) - last = c; - if (c > 9) - have_a_hex_digit = 1; - } - if (have_a_hex_digit == 0) - return 1; - if (last > 9) - return 1; - return 0; -} - - -/* - * returns - * 1 if regs seems to be a reasonable kernel exception frame. - * 2 if regs seems to be a reasonable user exception frame - * (in the current task). - * 0 if this looks like neither. - */ -int -frame_is_sane(db_regs_t * regs) -{ - /* no good if we can't read the whole frame */ - if (badwordaddr((vm_offset_t) regs) || badwordaddr((vm_offset_t) & regs->mode)) - return 0; - -#ifndef DIAGNOSTIC - /* disabled for now -- see fpu_enable in luna88k/eh.s */ - /* r0 must be 0 (obviously) */ - if (regs->r[0] != 0) - return 0; -#endif - - /* stack sanity ... r31 must be nonzero, but must be word aligned */ - if (regs->r[31] == 0 || (regs->r[31] & 3) != 0) - return 0; - - /* sxip is reasonable */ -#if 0 - if ((regs->sxip & 1) == 1) - return 0; -#endif - /* snip is reasonable */ - if ((regs->snip & 3) != 2) - return 0; - /* sfip is reasonable */ - if ((regs->sfip & 3) != 2) - return 0; - - /* epsr sanity */ - if ((regs->epsr & 0x8FFFFFF5 U) == 0x800003f0 U) { /* kernel mode */ - if (regs->epsr & 0x40000000) - db_printf("[WARNING: byte order in kernel frame at %x " - "is little-endian!]\n", regs); - return 1; - } - if ((regs->epsr & 0x8FFFFFFF U) == 0x000003f0 U) { /* user mode */ - if (regs->epsr & 0x40000000) - db_printf("[WARNING: byte order in user frame at %x " - "is little-endian!]\n", regs); - return 2; - } - return 0; -} - -char - * -m88k_exception_name(unsigned vector) -{ - switch (vector) { - default: - case 0:return "Reset"; - case 1: - return "Interrupt"; - case 2: - return "Instruction Access Exception"; - case 3: - return "Data Access Exception"; - case 4: - return "Misaligned Access Exception"; - case 5: - return "Unimplemented Opcode Exception"; - case 6: - return "Privilege Violation"; - case 7: - return "Bounds Check"; - case 8: - return "Integer Divide Exception"; - case 9: - return "Integer Overflow Exception"; - case 10: - return "Error Exception"; - case 114: - return "FPU precise"; - case 115: - return "FPU imprecise"; - case 130: - return "Ddb break"; - case 131: - return "Ddb trace"; - case 132: - return "Ddb trap"; - case 451: - return "Syscall"; - } -} -/* - * Read a word at address addr. - * Return 1 if was able to read, 0 otherwise. - */ -unsigned -db_trace_get_val(vm_offset_t addr, unsigned *ptr) -{ - jmp_buf db_jmpbuf; - jmp_buf *prev = db_recover; - boolean_t old_quiet_db_read_bytes = quiet_db_read_bytes; - - quiet_db_read_bytes = 1; - - if (setjmp(*(db_recover = &db_jmpbuf)) != 0) { - db_recover = prev; - quiet_db_read_bytes = old_quiet_db_read_bytes; - return 0; - } else { - db_read_bytes((char *) addr, 4, (char *) ptr); - db_recover = prev; - quiet_db_read_bytes = old_quiet_db_read_bytes; - return 1; - } -} - - -#define FIRST_CALLPRESERVED_REG 14 -#define LAST_CALLPRESERVED_REG 29 -#define FIRST_ARG_REG 2 -#define LAST_ARG_REG 9 -#define RETURN_VAL_REG 1 - -static unsigned global_saved_list = 0x0; /* one bit per register */ -static unsigned local_saved_list = 0x0; /* one bit per register */ -static unsigned trashed_list = 0x0; /* one bit per register */ -static unsigned saved_reg[32]; /* one value per register */ - -#define reg_bit(reg) (1<<((reg)%32)) - -static void -save_reg(int reg, unsigned value) -{ -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("save_reg(%d, %x)\n", reg, value); -#endif - if (trashed_list & reg_bit(reg)) { -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("<trashed>\n"); -#endif - return; /* don't save trashed registers */ - } - saved_reg[(reg % 32)] = value; - global_saved_list |= reg_bit(reg); - local_saved_list |= reg_bit(reg); -} -#define mark_reg_trashed(reg) (trashed_list |= reg_bit(reg)) - -#define have_global_reg(reg) (global_saved_list & (1<<(reg))) -#define have_local_reg(reg) (local_saved_list & (1<<(reg))) - -#define clear_local_saved_regs() { local_saved_list = trashed_list = 0; } -#define clear_global_saved_regs() { local_saved_list = global_saved_list = 0; } - -#define saved_reg_value(reg) (saved_reg[(reg)]) - -/* - * Show any arguments that we might have been able to determine. - */ -static void -print_args(void) -{ - int reg, last_arg; - - /* find the highest argument register saved */ - for (last_arg = LAST_ARG_REG; last_arg >= FIRST_ARG_REG; last_arg--) - if (have_local_reg(last_arg)) - break; - if (last_arg < FIRST_ARG_REG) - return; /* none were saved */ - - db_printf("("); - - /* print each one, up to the highest */ - for (reg = FIRST_ARG_REG; /* nothing */ ; reg++) { - if (!have_local_reg(reg)) - db_printf("?"); - else { - unsigned value = saved_reg_value(reg); - db_printf("%s%x", hex_value_needs_0x(value) ? "0x" : "", value); - } - if (reg == last_arg) - break; - else - db_printf(", "); - } - db_printf(")"); -} - - -#define JUMP_SOURCE_IS_BAD 0 -#define JUMP_SOURCE_IS_OK 1 -#define JUMP_SOURCE_IS_UNLIKELY 2 - -/* - * Give an address to where we return, and an address to where we'd jumped, - * Decided if it all makes sense. - * - * Gcc sometimes optimized something like - * if (condition) - * func1(); - * else - * OtherStuff... - * to - * bcnd !condition mark - * bsr.n func1 - * or r1, r0, mark2 - * mark: - * OtherStuff... - * mark2: - * - * So RETURN_TO will be MARK2, even though we really did branch via - * 'bsr.n func1', so this makes it difficult to be certaian about being - * wrong. - */ -static int -is_jump_source_ok(unsigned return_to, unsigned jump_to) -{ - unsigned flags; - union instruction instruction; - - /* - * Delayed branches are most common... look two instructions before - * where we were going to return to to see if it's a delayed branch. - */ - if (!db_trace_get_val(return_to - 8, &instruction.rawbits)) - return JUMP_SOURCE_IS_BAD; - flags = m88k_instruction_info(instruction.rawbits); - - if ((flags & FLOW_CTRL) && (flags & DELAYED) && (flags & (JSR | BSR))) { - if (flags & JSR) - return JUMP_SOURCE_IS_OK; /* have to assume it's - * correct */ - /* calculate the offset */ - if (br_dest(return_to - 8, instruction) == jump_to) - return JUMP_SOURCE_IS_OK; /* exactamundo! */ - else - return JUMP_SOURCE_IS_UNLIKELY; /* seems wrong */ - } - /* - * Try again, looking for a non-delayed jump one back. - */ - if (!db_trace_get_val(return_to - 4, &instruction.rawbits)) - return JUMP_SOURCE_IS_BAD; - flags = m88k_instruction_info(instruction.rawbits); - - if ((flags & FLOW_CTRL) && !(flags & DELAYED) && (flags & (JSR | BSR))) { - if (flags & JSR) - return JUMP_SOURCE_IS_OK; /* have to assume it's - * correct */ - /* calculate the offset */ - if (br_dest(return_to - 4, instruction) == jump_to) - return JUMP_SOURCE_IS_OK; /* exactamundo! */ - else - return JUMP_SOURCE_IS_UNLIKELY; /* seems wrong */ - } - return JUMP_SOURCE_IS_UNLIKELY; -} - -static char *note = 0; -static int next_address_likely_wrong = 0; - -/* How much slop we expect in the stack trace */ -#define FRAME_PLAY 8 - -/* - * Stack decode - - * unsigned addr; program counter - * unsigned *stack; IN/OUT stack pointer - * - * given an address within a function and a stack pointer, - * try to find the function from which this one was called - * and the stack pointer for that function. - * - * The return value is zero (if we get confused) or - * we determine that the return address has not yet - * been saved (early in the function prologue). Otherwise - * the return value is the address from which this function - * was called. - * - * Note that even is zero is returned (the second case) the - * stack pointer can be adjusted. - * - */ -static int -stack_decode(unsigned addr, unsigned *stack) -{ - db_sym_t proc; - unsigned offset_from_proc; - unsigned instructions_to_search; - unsigned check_addr; - unsigned function_addr; /* start of function */ - unsigned r31 = *stack; /* the r31 of the function */ - unsigned inst; /* text of an instruction */ - unsigned ret_addr; /* address to which we return */ - unsigned tried_to_save_r1 = 0; - -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("\n>>>stack_decode(addr=%x, stack=%x)\n", - addr, *stack); -#endif - - /* get what we hope will be the db_sym_t for the function name */ - proc = db_search_symbol(addr, DB_STGY_PROC, &offset_from_proc); - if (offset_from_proc == addr) /* i.e. no symbol found */ - proc = DB_SYM_NULL; - - /* - * Somehow, find the start of this function. - * If we found a symbol above, it'll have the address. - * Otherwise, we've got to search for it.... - */ - if (proc != DB_SYM_NULL) { - char *names; - db_symbol_values(proc, &names, &function_addr); - if (names == 0) - return 0; -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("name %s address 0x%x\n", - names, function_addr); -#endif - } else { - int instructions_to_check = 400; - /* - * hmm - unable to find symbol. Search back - * looking for a function prolog. - */ - for (check_addr = addr; instructions_to_check-- > 0; check_addr -= 4) { - if (!db_trace_get_val(check_addr, &inst)) - break; - - if (SUBU_R31_R31_IMM(inst)) { -#if 0 - /* - * If the next instruction is "st r1, r31, ####" - * then we can feel safe we have the start of - * a function. - */ - if (!db_trace_get_val(check_addr + 4, &inst)) - continue; - if (ST_R1_R31_IMM(instr)) - break; /* sucess */ -#else - /* - * Latest GCC optimizer is just too good... the store - * of r1 might come much later... so we'll have to - * settle for just the "subr r31, r31, ###" to mark - * the start.... - */ - break; -#endif - } - /* - * if we come across a [jmp r1] or [jmp.n r1] assume we have hit - * the previous functions epilogue and stop our search. - * Since we know we would have hit the "subr r31, r31" if it was - * right in front of us, we know this doesn't have one so - * we just return failure.... - */ - if (JMP_R1(inst) || JMPN_R1(inst)) { -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("ran into a [jmp r1] at %x (addr=%x)\n", - check_addr, addr); -#endif - return 0; - } - } - if (instructions_to_check < 0) { -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("couldn't find func start (addr=%x)\n", addr); -#endif - return 0; /* bummer, couldn't find it */ - } - function_addr = check_addr; - } - - /* - * We now know the start of the function (function_addr). - * If we're stopped right there, or if it's not a - * subu r31, r31, #### - * then we're done. - */ - if (addr == function_addr) { -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("at start of func\n"); -#endif - return 0; - } - if (!db_trace_get_val(function_addr, &inst)) { -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("couldn't read %x at line %d\n", - function_addr, __LINE__); -#endif - return 0; - } - SHOW_INSTRUCTION(function_addr, inst, "start of function: "); - if (!SUBU_R31_R31_IMM(inst)) { -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("<not subu,r31,r31,imm>\n"); -#endif - return 0; - } - /* add the size of this frame to the stack (for the next frame) */ - *stack += IMM16VAL(inst); - - /* - * Search from the beginning of the function (funstart) to where we are - * in the function (addr) looking to see what kind of registers have - * been saved on the stack. - * - * We'll stop looking before we get to ADDR if we hit a branch. - */ - clear_local_saved_regs(); - check_addr = function_addr + 4; /* we know the first inst isn't a - * store */ - - for (instructions_to_search = (addr - check_addr) / sizeof(long); - instructions_to_search-- > 0; - check_addr += 4) { - union instruction instruction; - unsigned flags; - - /* read the instruction */ - if (!db_trace_get_val(check_addr, &instruction.rawbits)) { -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("couldn't read %x at line %d\n", - check_addr, __LINE__); -#endif - break; - } - SHOW_INSTRUCTION(check_addr, instruction.rawbits, "prolog: "); - - /* find out the particulars about this instruction */ - flags = m88k_instruction_info(instruction.rawbits); - - /* if a store to something off the stack pointer, note the - * value */ - if ((flags & STORE) && instruction.diatic.s1 == /* stack pointer */ 31) { - unsigned value; - if (!have_local_reg(instruction.diatic.d)) { - if (instruction.diatic.d == 1) - tried_to_save_r1 = r31 + instruction.diatic.i16; - if (db_trace_get_val(r31 + instruction.diatic.i16, &value)) - save_reg(instruction.diatic.d, value); - } - if ((flags & DOUBLE) && !have_local_reg(instruction.diatic.d + 1)) { - if (instruction.diatic.d == 0) - tried_to_save_r1 = r31 + instruction.diatic.i16 + 4; - if (db_trace_get_val(r31 + instruction.diatic.i16 + 4, &value)) - save_reg(instruction.diatic.d + 1, value); - } - } - /* if an inst that kills D (and maybe D+1), note that */ - if (flags & TRASHES) { - mark_reg_trashed(instruction.diatic.d); - if (flags & DOUBLE) - mark_reg_trashed(instruction.diatic.d + 1); - } - /* if a flow control instruction, stop now (or next if - * delayed) */ - if ((flags & FLOW_CTRL) && instructions_to_search != 0) - instructions_to_search = (flags & DELAYED) ? 1 : 0; - } - - /* - * If we didn't save r1 at some point, we're hosed. - */ - if (!have_local_reg(1)) { - if (tried_to_save_r1) { - db_printf(" <return value of next fcn unreadable in %08x>\n", - tried_to_save_r1); - } -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("didn't save r1\n"); -#endif - return 0; - } - ret_addr = saved_reg_value(1); - -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("Return value is = %x, function_addr is %x.\n", - ret_addr, function_addr); -#endif - - /* - * In support of this, continuation.s puts the low bit on the - * return address for continuations (the return address will never - * be used, so it's ok to do anything you want to it). - */ - if (ret_addr & 1) { - note = "<<can not trace past a continuation>>"; - ret_addr = 0; - } else - if (ret_addr != 0x00) { - switch (is_jump_source_ok(ret_addr, function_addr)) { - case JUMP_SOURCE_IS_OK: - break; /* excellent */ - - case JUMP_SOURCE_IS_BAD: -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("jump is bad\n"); -#endif - return 0; /* bummer */ - - case JUMP_SOURCE_IS_UNLIKELY: - next_address_likely_wrong = 1;; - break; - } - } - return ret_addr; -} - -static void -db_stack_trace_cmd2(db_regs_t * regs) -{ - unsigned stack; - unsigned depth = 1; - unsigned where; - unsigned ft; - unsigned pair[2]; - int i; - - /* - * Frame_is_sane returns: - * 1 if regs seems to be a reasonable kernel exception frame. - * 2 if regs seems to be a reasonable user exception frame - * (in the current task). - * 0 if this looks like neither. - */ - if (ft = frame_is_sane(regs), ft == 0) { - db_printf("Register frame 0x%x is suspicous; skipping trace\n", regs); - return; - } - /* if user space and no user space trace specified, puke */ - if (ft == 2 && !(trace_flags & TRACE_USER_FLAG)) - return; - - /* fetch address */ - /* use sxip if valid, otherwise try snip or sfip */ - where = ((regs->sxip & 2) ? regs->sxip : - ((regs->snip & 2) ? regs->snip : - regs->sfip)) & ~3; - stack = regs->r[31]; - db_printf("stack base = 0x%x\n", stack); - db_printf("(0) "); /* depth of trace */ - if (trace_flags & TRACE_SHOWADDRESS_FLAG) - db_printf("%08x ", where); - db_printsym(where, DB_STGY_PROC); - clear_global_saved_regs(); - - /* see if this routine had a stack frame */ - if ((where = stack_decode(where, &stack)) == 0) { - where = regs->r[1]; - db_printf("(stackless)"); - } else { - print_args(); - if (trace_flags & TRACE_SHOWFRAME_FLAG) - db_printf(" [frame 0x%x]", stack); - } - db_printf("\n"); - if (note) { - db_printf(" %s\n", note); - note = 0; - } - do { - /* - * If requested, show preserved registers at the time - * the next-shown call was made. Only registers known to have - * changed from the last exception frame are shown, as others - * can be gotten at by looking at the exception frame. - */ - if (trace_flags & TRACE_SHOWCALLPRESERVED_FLAG) { - int r, title_printed = 0; - - for (r = FIRST_CALLPRESERVED_REG; r <= LAST_CALLPRESERVED_REG; r++) { - if (have_global_reg(r)) { - unsigned value = saved_reg_value(r); - if (title_printed == 0) { - title_printed = 1; - db_printf("[in next func:"); - } - if (value == 0) - db_printf(" r%d", r); - else - if (value <= 9) - db_printf(" r%d=%x", r, value); - else - db_printf(" r%d=x%x", r, value); - } - } - if (title_printed) - db_printf("]\n"); - } - db_printf("(%d)%c", depth++, next_address_likely_wrong ? '?' : ' '); - next_address_likely_wrong = 0; - - if (trace_flags & TRACE_SHOWADDRESS_FLAG) - db_printf("%08x ", where); - db_printsym(where, DB_STGY_PROC); - where = stack_decode(where, &stack); - print_args(); - if (trace_flags & TRACE_SHOWFRAME_FLAG) - db_printf(" [frame 0x%x]", stack); - db_printf("\n"); - if (note) { - db_printf(" %s\n", note); - note = 0; - } - } while (where); - - /* try to trace back over trap/exception */ - - stack &= ~7; /* double word aligned */ - /* take last top of stack, and try to find an exception frame near it */ - - i = FRAME_PLAY; - -#ifdef TRACE_DEBUG - if (DEBUGGING_ON) - db_printf("(searching for exception frame at 0x%x)\n", stack); -#endif - - while (i) { - /* - * On the stack, a pointer to the exception frame is written - * in two adjacent words. In the case of a fault from the kernel, - * this should point to the frame right above them: - * - * Exception Frame Top - * .. - * Exception Frame Bottom <-- frame addr - * frame addr - * frame addr <-- stack pointer - * - * In the case of a fault from user mode, the top of stack - * will just have the address of the frame - * replicated twice. - * - * frame addr <-- top of stack - * frame addr - * - * Here we are just looking for kernel exception frames. - */ - - if (badwordaddr((vm_offset_t) stack) || - badwordaddr((vm_offset_t) (stack + 4))) - break; - - db_read_bytes((char *) stack, 2 * sizeof(int), (char *) pair); - - /* the pairs should match and equal stack+8 */ - if (pair[0] == pair[1]) { - if (pair[0] != stack + 8) { - /* - if (!badwordaddr((vm_offset_t)pair[0]) && (pair[0]!=0)) - db_printf("stack_trace:found pair 0x%x but != to stack+8\n", - pair[0]); - */ - } else - if (frame_is_sane((db_regs_t *) pair[0])) { - db_regs_t *frame = (db_regs_t *) pair[0]; - char *cause = m88k_exception_name(frame->vector); - - db_printf("-------------- %s [EF: 0x%x] -------------\n", - cause, frame); - db_stack_trace_cmd2(frame); - return; - } -#ifdef TRACE_DEBUG - else - if (DEBUGGING_ON) - db_printf("pair matched, but frame at 0x%x looks insane\n", - stack + 8); -#endif - } - stack += 8; - i--; - } - - /* - * If we go here, crawling back on the stack failed to find us - * a previous exception frame. Look for a user frame pointer - * pointed to by a word 8 bytes off of the top of the stack - * if the "u" option was specified. - */ - if (trace_flags & TRACE_USER_FLAG) { - db_regs_t *user; - - /* Make sure we are back on the right page */ - stack -= 4 * FRAME_PLAY; - stack = stack & ~(KERNEL_STACK_SIZE - 1); /* point to the bottom */ - stack += KERNEL_STACK_SIZE - 8; - - if (badwordaddr((vm_offset_t) stack) || - badwordaddr((vm_offset_t) stack)) - return; - - db_read_bytes((char *) stack, 2 * sizeof(int), (char *) pair); - if (pair[0] != pair[1]) - return; - - /* have a hit */ - user = *((db_regs_t **) stack); - - if (frame_is_sane(user) == 2) { - db_printf("---------------- %s [EF : 0x%x] -------------\n", - m88k_exception_name(user->vector), user); - db_stack_trace_cmd2(user); - } - } -} -/* - * stack trace - needs a pointer to a m88k saved state. - * - * If argument f is given, the stack pointer of each call frame is - * printed. - */ -void -db_stack_trace_cmd( - db_regs_t * addr, - int have_addr, - db_expr_t count, - char *modif) -{ - enum { - Default, Stack, Proc, Frame - } style = Default; - db_regs_t frame; /* a m88100_saved_state */ - db_regs_t *regs; - union { - db_regs_t *frame; - struct proc *proc; - unsigned num; - } arg; - arg.frame = addr; - - trace_flags = 0; /* flags will be set via modifers */ - - while (modif && *modif) { - switch (*modif++) { - case 'd': -#ifdef TRACE_DEBUG - trace_flags |= TRACE_DEBUG_FLAG; -#else - db_printtf("<debug trace not compiled in, ignoring>\n"); -#endif - break; - - case 's': - style = Stack; - break; - case 'f': - style = Frame; - break; - case 'p': - trace_flags |= TRACE_SHOWCALLPRESERVED_FLAG; - break; - case 'a': - trace_flags |= TRACE_SHOWADDRESS_FLAG; - break; - case 'F': - trace_flags |= TRACE_SHOWFRAME_FLAG; - break; - case 'u': - trace_flags |= TRACE_USER_FLAG; - break; - default: - db_printf("unknown trace modifier [%c]\n", modif[-1]); - /* FALLTHROUGH */ - case 'h': - db_printf("usage: trace/[MODIFIER] [ARG]\n"); - db_printf(" u = include user trace\n"); - db_printf(" F = print stack frames\n"); - db_printf(" a = show return addresses\n"); - db_printf(" p = show call-preserved registers\n"); - db_printf(" s = ARG is a stack pointer\n"); - db_printf(" f = ARG is a frame pointer\n"); -#ifdef TRACE_DEBUG - db_printf(" d = trace-debugging output\n"); -#endif - return; - } - } - - if (!have_addr && style != Default) { - db_printf("expecting argument with /s or /f\n"); - return; - } - if (have_addr && style == Default) - style = Proc; - - switch (style) { - case Default: - regs = DDB_REGS; - break; - - case Frame: - regs = arg.frame; - break; - - case Stack: - { - unsigned val1, val2, sxip; - unsigned ptr; - bzero((void *) &frame, sizeof(frame)); -#define REASONABLE_FRAME_DISTANCE 2048 - - /* - * We've got to find the top of a stack frame so we can get both - * a PC and and real SP. - */ - for (ptr = arg.num; /**/ ; ptr += 4) { - /* Read a word from the named stack */ - if (db_trace_get_val(ptr, &val1) == 0) { - db_printf("can't read from %x, aborting.\n", ptr); - return; - } - /* - * See if it's a frame pointer.... if so it will be larger than - * the address it was taken from (i.e. point back up the stack) - * and we'll be able to read where it points. - */ - if (val1 <= ptr || - (val1 & 3) || - val1 > (ptr + REASONABLE_FRAME_DISTANCE)) - continue; - - /* peek at the next word to see if it could be - * a return address */ - if (db_trace_get_val(ptr, &sxip) == 0) { - db_printf("can't read from %x, aborting.\n", ptr); - return; - } - if (sxip == 0 || !db_trace_get_val(sxip, &val2)) - continue; - - if (db_trace_get_val(val1, &val2) == 0) { - db_printf("can't read from %x, aborting.\n", val1); - continue; - } - /* - * The value we've just read will be either another frame pointer, - * or the start of another exception frame. - */ - if ( -#ifdef JEFF_DEBUG - val2 == 0 -#else - val2 == 0x12345678 -#endif - && db_trace_get_val(val1 - 4, &val2) && val2 == val1 - && db_trace_get_val(val1 - 8, &val2) && val2 == val1) { - /* we've found a frame, so the stack - * must have been good */ - db_printf("%x looks like a frame, accepting %x\n", val1, ptr); - break; - } - if (val2 > val1 && (val2 & 3) == 0) { - /* well, looks close enough to be - * another frame pointer */ - db_printf("*%x = %x looks like a stack frame pointer, accepting %x\n", val1, val2, ptr); - break; - } - } - - frame.r[31] = ptr; - frame.epsr = 0x800003f0 U; - frame.sxip = sxip | 2; - frame.snip = frame.sxip + 4; - frame.sfip = frame.snip + 4; - db_printf("[r31=%x, sxip=%x]\n", frame.r[31], frame.sxip); - regs = &frame; - } - } - - db_stack_trace_cmd2(regs); -} diff --git a/sys/arch/mvme88k/dev/bugtty.c b/sys/arch/mvme88k/dev/bugtty.c deleted file mode 100644 index 48f668a3102..00000000000 --- a/sys/arch/mvme88k/dev/bugtty.c +++ /dev/null @@ -1,490 +0,0 @@ -/* $NetBSD$ */ - -/* - * Copyright (c) 1995 Dale Rahn. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by Dale Rahn. - * 4. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <sys/param.h> -#include <sys/systm.h> -#include <sys/ioctl.h> -#include <sys/device.h> -#include <sys/tty.h> -#include <sys/proc.h> -#include <sys/conf.h> -#include <sys/uio.h> -#include <sys/queue.h> -#include <dev/cons.h> - -#include <machine/autoconf.h> -#include <machine/cpu.h> - -#include "bugtty.h" - -int bugttymatch __P((struct device *parent, void *self, void *aux)); -void bugttyattach __P((struct device *parent, struct device *self, void *aux)); - -struct cfdriver bugttycd = { - NULL, "bugtty", bugttymatch, bugttyattach, - DV_TTY, sizeof(struct device) -}; - -/* prototypes */ -int bugttycnprobe __P((struct consdev *cp)); -int bugttycninit __P((struct consdev *cp)); -int bugttycngetc __P((dev_t dev)); -int bugttycnputc __P((dev_t dev, char c)); - -int bugttyopen __P((dev_t dev, int flag, int mode, struct proc *p)); -int bugttyclose __P((dev_t dev, int flag, int mode, struct proc *p)); -int bugttyread __P((dev_t dev, struct uio *uio, int flag)); -int bugttywrite __P((dev_t dev, struct uio *uio, int flag)); -int bugttyioctl __P((dev_t dev, int cmd, caddr_t data, int flag, struct proc *p)); -int bugttystop __P((struct tty *tp, int flag)); - -#define DIALOUT(x) ((x) & 0x80) -#define SWFLAGS(dev) (bugttyswflags | (DIALOUT(dev) ? TIOCFLAG_SOFTCAR : 0)) - -#define BUGBUF 80 -char bugtty_ibuffer[BUGBUF+1]; -volatile char *pinchar = bugtty_ibuffer; -char bug_obuffer[BUGBUF+1]; - -#define bugtty_tty bugttytty -struct tty *bugtty_tty[NBUGTTY]; -int needprom = 1; - -int -bugttymatch(parent, self, aux) - struct device *parent; - void *self; - void *aux; -{ - extern int needprom; - - if (needprom == 0) - return (0); - return (1); -} - -void -bugttyattach(parent, self, aux) - struct device *parent; - struct device *self; - void *aux; -{ - printf("\n"); -} - -#define BUGTTYUNIT(x) ((x) & (0x7f)) -void bugttyoutput __P((struct tty *tp)); - -int bugttydefaultrate = TTYDEF_SPEED; -int bugttyswflags; - -int -bugttymctl(dev, bits, how) - dev_t dev; - int bits, how; -{ - static int settings = TIOCM_DTR | TIOCM_RTS | - TIOCM_CTS | TIOCM_CD | TIOCM_DSR; - int s; - - /*printf("mctl: dev %x, bits %x, how %x,",dev, bits, how);*/ - - /* settings are currently ignored */ - s = spltty(); - switch (how) { - case DMSET: - break; - case DMBIC: - break; - case DMBIS: - break; - case DMGET: - break; - } - (void)splx(s); - - bits = 0; - /* proper defaults? */ - bits |= TIOCM_DTR; - bits |= TIOCM_RTS; - bits |= TIOCM_CTS; - bits |= TIOCM_CD; - /* bits |= TIOCM_RI; */ - bits |= TIOCM_DSR; - - /* printf("retbits %x\n", bits); */ - return (bits); -} - -int -bugttyopen(dev, flag, mode, p) - dev_t dev; - int flag, mode; - struct proc *p; -{ - int s, unit = BUGTTYUNIT(dev); - struct tty *tp; - extern int needprom; - - if (needprom == 0) - return (ENODEV); - - s = spltty(); - if (bugtty_tty[unit]) { - tp = bugtty_tty[unit]; - } else { - tp = bugtty_tty[unit] = ttymalloc(); - } - tp->t_oproc = bugttyoutput; - tp->t_param = NULL; - tp->t_dev = dev; - - if ((tp->t_state & TS_ISOPEN) == 0) { - tp->t_state |= TS_WOPEN; - ttychars(tp); - if (tp->t_ispeed == 0) { - /* - * only when cleared do we reset to defaults. - */ - tp->t_iflag = TTYDEF_IFLAG; - tp->t_oflag = TTYDEF_OFLAG; - tp->t_cflag = TTYDEF_CFLAG; - tp->t_lflag = TTYDEF_LFLAG; - tp->t_ispeed = tp->t_ospeed = bugttydefaultrate; - } - /* bugtty does not have carrier */ - tp->t_cflag |= CLOCAL; - /* - * do these all the time - */ - if (bugttyswflags & TIOCFLAG_CLOCAL) - tp->t_cflag |= CLOCAL; - if (bugttyswflags & TIOCFLAG_CRTSCTS) - tp->t_cflag |= CRTSCTS; - if (bugttyswflags & TIOCFLAG_MDMBUF) - tp->t_cflag |= MDMBUF; - bugttyparam(tp, &tp->t_termios); - ttsetwater(tp); - - (void)bugttymctl(dev, TIOCM_DTR | TIOCM_RTS, DMSET); - /* - if ((SWFLAGS(dev) & TIOCFLAG_SOFTCAR) || - (bugttymctl(dev, 0, DMGET) & TIOCM_CD)) - tp->t_state |= TS_CARR_ON; - else - tp->t_state &= ~TS_CARR_ON; - */ - tp->t_state |= TS_CARR_ON; - } else if (tp->t_state & TS_XCLUDE && p->p_ucred->cr_uid != 0) { - splx(s); - return (EBUSY); - } - - /* - * if NONBLOCK requested, ignore carrier - */ -/* - if (flag & O_NONBLOCK) - goto done; -*/ - - splx(s); - /* - * Reset the tty pointer, as there could have been a dialout - * use of the tty with a dialin open waiting. - */ - tp->t_dev = dev; - return ((*linesw[tp->t_line].l_open)(dev, tp)); -} - -int -bugttyparam() -{ - return (0); -} - -void -bugttyoutput(tp) - struct tty *tp; -{ - int cc, s, unit, cnt ; - - /* only supports one unit */ - - if ((tp->t_state & TS_ISOPEN) == 0) - return; - - s = spltty(); - cc = tp->t_outq.c_cc; - while (cc > 0) { - cnt = min(BUGBUF, cc); - cnt = q_to_b(&tp->t_outq, bug_obuffer, cnt); - bugoutstr(bug_obuffer, &bug_obuffer[cnt]); - cc -= cnt; - } - splx(s); -} - -int -bugttyclose(dev, flag, mode, p) - dev_t dev; - int flag, mode; - struct proc *p; -{ - int unit = BUGTTYUNIT(dev); - struct tty *tp = bugtty_tty[unit]; - - (*linesw[tp->t_line].l_close)(tp, flag); - - ttyclose(tp); -#if 0 - bugtty_tty[unit] = NULL; -#endif - return (0); -} - -int -bugttyread(dev, uio, flag) - dev_t dev; - struct uio *uio; - int flag; -{ - struct tty *tp; - - if ((tp = bugtty_tty[BUGTTYUNIT(dev)]) == NULL) - return (ENXIO); - return ((*linesw[tp->t_line].l_read)(tp, uio, flag)); -} - -#if 1 -/* only to be called at splclk() */ -bugtty_chkinput() -{ - struct tty *tp; - - tp = bugtty_tty[0]; /* Kinda ugly hack */ - if (tp == NULL ) - return; - - if (buginstat()) { - while (buginstat()) { - u_char c = buginchr() & 0xff; - (*linesw[tp->t_line].l_rint)(c, tp); - } - /* - wakeup(tp); - */ - } -} -#endif - -int -bugttywrite(dev, uio, flag) - dev_t dev; - struct uio *uio; - int flag; -{ -#if 0 - /* bypass tty output routines. */ - int i, cnt, s; - int oldoff; - - s = spltty(); - oldoff = uio->uio_offset; - do { - uiomove(bug_obuffer, BUGBUF, uio); - bugoutstr(bug_obuffer, &bug_obuffer[uio->uio_offset - oldoff]); - oldoff = uio->uio_offset; - } while (uio->uio_resid != 0); - splx(s); - - return (0); -#else - struct tty *tp; - if((tp = bugtty_tty[BUGTTYUNIT(dev)]) == NULL) - return (ENXIO); - return ((*linesw[tp->t_line].l_write)(tp, uio, flag)); -#endif -} - -int -bugttyioctl(dev, cmd, data, flag, p) - dev_t dev; - int cmd; - caddr_t data; - int flag; - struct proc *p; -{ - int unit = BUGTTYUNIT(dev); - struct tty *tp = bugtty_tty[unit]; - int error; - - if (!tp) - return (ENXIO); - - error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p); - if (error >= 0) - return (error); - - error = ttioctl(tp, cmd, data, flag, p); - if (error >= 0) - return (error); - - switch (cmd) { - case TIOCSBRK: - /* */ - break; - - case TIOCCBRK: - /* */ - break; - - case TIOCSDTR: - (void) bugttymctl(dev, TIOCM_DTR | TIOCM_RTS, DMBIS); - break; - - case TIOCCDTR: - (void) bugttymctl(dev, TIOCM_DTR | TIOCM_RTS, DMBIC); - break; - - case TIOCMSET: - (void) bugttymctl(dev, *(int *) data, DMSET); - break; - - case TIOCMBIS: - (void) bugttymctl(dev, *(int *) data, DMBIS); - break; - - case TIOCMBIC: - (void) bugttymctl(dev, *(int *) data, DMBIC); - break; - - case TIOCMGET: - *(int *)data = bugttymctl(dev, 0, DMGET); - break; - case TIOCGFLAGS: - *(int *)data = SWFLAGS(dev); - break; - case TIOCSFLAGS: - error = suser(p->p_ucred, &p->p_acflag); - if (error != 0) - return (EPERM); - - bugttyswflags = *(int *)data; - bugttyswflags &= /* only allow valid flags */ - (TIOCFLAG_SOFTCAR | TIOCFLAG_CLOCAL | TIOCFLAG_CRTSCTS); - break; - default: - return (ENOTTY); - } - - return (0); -} - -int -bugttystop(tp, flag) - struct tty *tp; - int flag; -{ - int s; - - s = spltty(); - if (tp->t_state & TS_BUSY) { - if ((tp->t_state & TS_TTSTOP) == 0) - tp->t_state |= TS_FLUSH; - } - splx(s); - return (0); -} - -/* - * bugtty is the last possible choice for a console device. - */ -int -bugttycnprobe(cp) - struct consdev *cp; -{ - int maj; - extern int needprom; - - if (needprom == 0) { - cp->cn_pri = CN_DEAD; - return (0); - } - -#if 0 - switch (cputyp) { - case CPU_147: - case CPU_162: - cp->cn_pri = CN_NORMAL; - return (0); - default: - break; - } -#else - cp->cn_pri = CN_NORMAL; - return (0); -#endif /* 0 */ - - /* locate the major number */ - for (maj = 0; maj < nchrdev; maj++) - if (cdevsw[maj].d_open == bugttyopen) - break; - - cp->cn_dev = makedev(maj, 0); - cp->cn_pri = CN_NORMAL; - - return (1); -} - -int -bugttycninit(cp) - struct consdev *cp; -{ -} - -int -bugttycngetc(dev) - dev_t dev; -{ - return (buginchr()); -} - -int -bugttycnputc(dev, c) - dev_t dev; - char c; -{ - if (c == '\n') - bugoutchr('\r'); - bugoutchr(c); -} diff --git a/sys/arch/mvme88k/dev/clock.c b/sys/arch/mvme88k/dev/clock.c deleted file mode 100644 index 77b458f2526..00000000000 --- a/sys/arch/mvme88k/dev/clock.c +++ /dev/null @@ -1,109 +0,0 @@ - -#include <sys/param.h> -#include <sys/kernel.h> -#include <sys/device.h> -#include <machine/board.h> -#include <machine/bug.h> -#include <machine/pcctworeg.h> - -extern u_int *pcc_io_base; -extern const u_int timer_reload; -void setstatclockrate (int hzrate) -{ -} - -resettodr() -{ -} - -int -hexdectodec(unsigned char n) -{ - - return(((n>>4)&0x0F)*10 + (n&0x0F)); -} - -#define STARTOFTIME 1970 -#define FEBRUARY 2 -#define leapyear(year) (((year)%4==0) && ((year)%100) != 0 || ((year)%400) == 0) -#define days_in_year(year) (leapyear((year)) ? 366 : 365) -#define days_in_month(a) (month_days[(a) - 1]) - -static int month_days[12] = { - 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 -}; - - -inittodr(time_t base) -{ - struct bugrtc rtc; - u_long sec, min, hour, day, month, year; - u_long i, tmp, timebuf; - - /* ignore suggested time, use realtime clock via bug */ - bugrtcrd(&rtc); - sec = hexdectodec(rtc.s); - min = hexdectodec(rtc.m); - hour = hexdectodec(rtc.H); - day = hexdectodec(rtc.D); - month = hexdectodec(rtc.M); - year = hexdectodec(rtc.Y) + 1900; - - tmp = 0; - for (i = STARTOFTIME; i < year; i++) { - tmp += days_in_year(i); - } - for (i = 1; i < month; i++) { - tmp += days_in_month(i); - } - if (leapyear(year) && month > FEBRUARY) { - tmp++; - } - printf("date yy mm dd hh mm.ss:%02d %02d %02d %02d %02d.%02d:", - year,month,day,hour,min, sec); - tmp += (day -1); - timebuf = (((tmp * 24 + hour) * 60 + min) * 60 + sec); - printf(" epochsec %d\n",timebuf); - time.tv_sec = timebuf; - time.tv_usec = 0; -} - -clkread() -{ -} - -cpu_initclocks() -{ -#if 0 - u_int *io_base; - io_base = 0xfffe1000; /* should really be return of virtmem alloc */ - /* - io_base = pcc_io_base; - */ - /* timer 2 setup */ - PCC_TIMER2_PRE(io_base) = timer_reload; - PCC_TIMER2_CTR(io_base) = 0x7; - PCC_TIMER2_ICR(io_base) = 0x8e; -#endif -} - -/* - * Clock interrupts. - */ -int -clockintr(cap) - void *cap; -{ -#if 0 - volatile register unsigned char icr; - /* clear clock interrupt */ - asm ("ld.b %0,%1" : "=r" (icr) : "" (TIMER2ICR)); - icr |= ICLR; - asm ("st.b %0,%1" : "=r" (icr) : "" (TIMER2ICR)); - - /* read the limit register to clear the interrupt */ -#endif /* 0 */ - hardclock((struct clockframe *)cap); - - return (1); -} diff --git a/sys/arch/mvme88k/dev/m88k/bugio.c b/sys/arch/mvme88k/dev/m88k/bugio.c deleted file mode 100644 index 932614a29d5..00000000000 --- a/sys/arch/mvme88k/dev/m88k/bugio.c +++ /dev/null @@ -1,108 +0,0 @@ -#include <machine/bugio.h> - -#define INCHR "0x0000" -#define INSTAT "0x0001" -#define INLN "0x0002" -#define READSTR "0x0003" -#define READLN "0x0004" -#define DSKRD "0x0010" -#define DSKWR "0x0011" -#define DSKCFIG "0x0012" -#define OUTCHR "0x0020" -#define OUTSTR "0x0021" -#define PCRLF "0x0026" -#define TMDISP "0x0042" -#define DELAY "0x0043" -#define RTC_DSP "0x0052" -#define RTC_RD "0x0053" -#define RETURN "0x0063" -#define BRD_ID "0x0070" -#define BUGTRAP "0x01F0" - -char -buginchr(void) -{ - register int cc asm("r2"); - asm("or r9,r0," INCHR); - asm("tb0 0,r0,0x1F0"); - /*asm("or %0,r0,r2" : "=r" (cc) : );*/ - return ((char)cc & 0xFF); -} - -/* return 1 if not empty else 0 */ - -buginstat(void) -{ - int ret; - asm("or r9,r0," INSTAT); - asm("tb0 0,r0,0x1F0"); - asm("or %0,r0,r2" : "=r" (ret) : ); - return (ret & 0x40 ? 1 : 0); -} - -bugoutchr(unsigned char c) -{ - unsigned char cc; - - if ((cc = c) == '\n') { - bugpcrlf(); - return; - } - asm("or r2,r0,%0" : : "r" (cc)); - asm("or r9,r0," OUTCHR); - asm("tb0 0,r0,0x1F0"); -} - -bugoutstr(char *s, char *se) -{ - asm("or r9,r0," OUTSTR); - asm("tb0 0,r0,0x1F0"); -} - -bugpcrlf(void) -{ - asm("or r9,r0," PCRLF); - asm("tb0 0,r0,0x1F0"); -} -/* return 0 on success */ - -bugdskrd(struct bugdisk_io *arg) -{ - int ret; - asm("or r9,r0, " DSKRD); - asm("tb0 0,r0,0x1F0"); - asm("or %0,r0,r2" : "=r" (ret) : ); - return ((ret&0x4) == 0x4 ? 1 : 0); -} - -/* return 0 on success */ - -bugdskwr(struct bugdisk_io *arg) -{ - int ret; - asm("or r9,r0, " DSKWR); - asm("tb0 0,r0,0x1F0"); - asm("or %0,r0,r2" : "=r" (ret) : ); - return ((ret&0x4) == 0x4 ? 1 : 0); -} - -bugrtcrd(struct bugrtc *rtc) -{ - asm("or r9,r0, " RTC_RD); - asm("tb0 0,r0,0x1F0"); -} - -bugreturn(void) -{ - asm("or r9,r0, " RETURN); - asm("tb0 0,r0,0x1F0"); -} - -bugbrdid(struct bugbrdid *id) -{ - struct bugbrdid *ptr; - asm("or r9,r0, " BRD_ID); - asm("tb0 0,r0,0x1F0"); - asm("or %0,r0,r2" : "=r" (ptr) : ); - bcopy(ptr, id, sizeof(struct bugbrdid)); -} diff --git a/sys/arch/mvme88k/dev/mb.c b/sys/arch/mvme88k/dev/mb.c deleted file mode 100644 index fda18a1502f..00000000000 --- a/sys/arch/mvme88k/dev/mb.c +++ /dev/null @@ -1,87 +0,0 @@ -#include <sys/param.h> -#include <sys/systm.h> -#include <sys/reboot.h> -#include <sys/conf.h> -#include <sys/device.h> -#include <sys/disklabel.h> -#include <machine/cpu.h> - -void mbattach __P((struct device *, struct device *, void *)); -int mbprint __P((void *, const char *)); -int mbmatch __P((struct device *, struct cfdata *, void *)); -int submatch( struct device *parent, struct cfdata *self, void *aux); - -/* - * mainbus driver - */ -struct cfdriver mainbuscd = { - NULL, "mainbus", mbmatch, mbattach, - DV_DULL, sizeof(struct device), NULL, 0 -}; - -int -mbmatch(pdp, cfp, auxp) - struct device *pdp; - struct cfdata *cfp; - void *auxp; -{ - if (cfp->cf_unit > 0) - return(0); - /* - * We are always here - */ - return(1); -} -/* - * "find" all the things that should be there. - */ -void -mbattach(pdp, dp, auxp) - struct device *pdp, *dp; - void *auxp; -{ - struct cfdata *cf; - extern int machineid; - - /* nothing to do for this bus */ - printf (" machine type %x\n", machineid); - - if ((cf = config_search(submatch, dp, auxp)) != NULL) { - return; - } - -} - -mbprint(auxp, pnp) - void *auxp; - const char *pnp; -{ - if (pnp) - printf("%s at %s", (char *)auxp, pnp); - return(UNCONF); -} - -int -submatch(parent, self, aux) - struct device *parent; - struct cfdata *self; - void *aux; -{ - if (!(*self->cf_driver->cd_match)(parent, self, NULL)) { - /* - * STOLEN - BE CAREFUL - * If we don't do this, isa_configure() will repeatedly try to - * probe devices that weren't found. But we need to be careful - * to do it only for the ISA bus, or we would cause things like - * `com0 at ast? slave ?' to not probe on the second ast. - */ - if (!parent) - self->cf_fstate = FSTATE_FOUND; - - return 0; - } - - config_attach(parent, self, NULL, mbprint); - - return 1; -} diff --git a/sys/arch/mvme88k/dev/pcc2.c b/sys/arch/mvme88k/dev/pcc2.c deleted file mode 100644 index c78cbb24a81..00000000000 --- a/sys/arch/mvme88k/dev/pcc2.c +++ /dev/null @@ -1,253 +0,0 @@ -#include <sys/param.h> -#include <sys/systm.h> -#include <sys/device.h> -#include <machine/cpu.h> -#include <machine/pcc2.h> - -int m1x7pccprobe(struct device *parent, struct cfdata *self, void *aux); -void m1x7pccattach(struct device *parent, struct device *self, void *aux); - -int abort_handler(); -extern void abort_intrv(); -extern void pcc_intrv(); -extern int intrh_debug; -extern int machineid; -extern void badtrap(); -extern int submatch( struct device *parent, struct cfdata *self, void *aux); -/* static */ u_int *pcc_io_base; -static u_int *pcc_vector_base; - -static void abort_setup(); -void timer2_intr(); - -struct pcctwosoftc { - struct device sc_dev; - caddr_t sc_vaddr; - caddr_t sc_paddr; - struct pcctworeg *sc_pcc2; -}; - -void pcctwoattach __P((struct device *, struct device *, void *)); -int pcctwoprobe __P((struct device *, void *, void *)); -int pcctwoabort __P((struct frame *)); - -struct cfdriver pcctwocd = { - NULL, "pcctwo", pcctwomatch, pcctwoattach, - DV_DULL, sizeof(struct pcctwosoftc), 0 -}; - -struct pcctworeg *sys_pcc2 = NULL; - -int -pcctwomatch(struct device *parent, struct cfdata *self, void *aux) -{ -#if defined(__m88k__) - if (machineid == 0x187) { - return 1; - } -#endif - return 0; -} - -void -pcctwoattach(struct device *parent, struct device *self, void *aux) -{ - struct cfdata *cf; - volatile char *ibvr; /* Interrupt Base Vector Register */ - u_int ibv; /* Interrupt Base Vector, offset from vbr */ - u_int *iv; /* interupt vector */ - int i; - u_int vector_base; - - /* attach memory mapped io space */ - /* map 0xfffe1000 - 0xfffe102f, 0xfffe2800 */ - /* ppc_io_base = mmio(0xfffe1000, 1800, PG_RW|PG_CI); */ - pcc_io_base = 0xfffe1000; /* should really be return of virtmem alloc */ - /* set PCC vector base */ - ibv = PCC_IBVR(pcc_io_base) & 0xf0; - ibvr = &PCC_IBVR(pcc_io_base); - printf("pcc:ibvr %x *ibvr %x ibv %x\n",ibvr,*ibvr, ibv); - pcc_vector_base = (u_int *)ibv; - asm volatile ("movec vbr,%0": "=d" (vector_base)); - printf("pcc:vector_base %x\n",vector_base); - /* register "standard interupt handlers */ - - abort_setup(); - iv = (u_int *)(vector_base + (ibv * 4)); -printf("iv %x\n",iv); - for (i = 0; i <= SOFT2_VECTOR; i++) { - iv[i] = (u_int)pcc_intrv; - } - /* - timer2_setup(); - */ - iv = (u_int *)(vector_base + (ibv + TICK2_VECTOR) * 4); - *iv = (u_int)&pcc_intrv; - -#ifdef DEBUG - if (intrh_debug) - pr_intrh(); -#endif - if ((cf = config_search(submatch, self, aux)) != NULL) { - return; - } - return ; -} -asm (" .text"); -asm (" .global _pcc_intrv"); -asm ("_pcc_intrv:"); -asm (" link a6,#0"); -asm (" movml a0/a1/d0/d1,sp@-"); -asm (" movel a6,a0"); -asm (" addql #4,a0"); -asm (" movel a0,sp@-"); -asm (" jbsr _pcc_handler"); -asm (" addql #4,sp"); -asm (" movml sp@+,a0/a1/d0/d1"); -asm (" unlk a6"); -asm (" jra rei"); - -asm (" .global _abort_intrv"); -asm ("_abort_intrv:"); -asm (" movml a0/a1/d0/d1,sp@-"); -asm (" jbsr _abort_handler"); -asm (" movml sp@+,a0/a1/d0/d1"); -asm (" jra rei"); -/* asm (" .previous"); */ - -void *m147le_arg; -void -pcc_handler(struct exception_frame *except) -{ - u_int vector; - int handled = 0; - -#if 0 - printf("except %x\n",except); - printf("sr %x\n",except->sr); - printf("pc %x\n",except->pc); - printf("type %x\n",except->type); -#endif - vector = except->vo; -/* printf("vector %x\n",vector); */ - vector = (vector/4 - (u_int)pcc_vector_base); -/* printf("vector %x\n",vector); */ - - switch (vector) { - case AC_FAIL_VECTOR: - printf("ac_fail vector\n"); - break; - case BERR_VECTOR: - printf("berr vector\n"); - printf("pcc_handler:invalid vector %x\n",vector); - break; - case ABORT_VECTOR: - printf("abort vector\n"); - abort_handler(); - handled = 1; - break; - case SERIAL_VECTOR: - printf("serial vector\n"); - PCC_SERIAL_ICR(0xfffe1000) = 0; - break; - case LANCE_VECTOR: - leintr(m147le_arg); - handled = 1; - break; - case SCSIPORT_VECTOR: - printf("scsiport vector\n"); - m147sc_scintr(); - break; - case SCSIDMA_VECTOR: - printf("scsidma vector\n"); - m147sc_dmaintr(); - break; - case PRINTER_VECTOR: - printf("printer vector\n"); - break; - case TICK1_VECTOR: - printf("tick1 vector\n"); - printf("pcc_handler:invalid vector %x\n",vector); - break; - case TICK2_VECTOR: - timer2_intr(except); - handled = 1; - break; - case SOFT1_VECTOR: - printf("soft1 vector\n"); - break; - case SOFT2_VECTOR: - printf("soft2 vector\n"); - break; - default: - printf("pcc_handler:invalid vector %x\n",vector); - } - - if (handled == 0) { - printf("except %x\n",except); - printf("sr %x\n",except->sr); - printf("pc %x\n",except->pc); - printf("type %x\n",except->type); - } -} - - -int -abort_handler() -{ - printf("aicr = 0x%x\n",PCC_ABRT_ICR(pcc_io_base)); - PCC_ABRT_ICR(pcc_io_base) = 0x88; - printf("aicr = 0x%x\n",PCC_ABRT_ICR(pcc_io_base)); - Debugger(); - return 0; -} -static void abort_setup() -{ - printf("PCC_ABRT_ICR %x\n",&PCC_ABRT_ICR(pcc_io_base)); - printf("aicr = 0x%x\n",PCC_ABRT_ICR(pcc_io_base)); - PCC_ABRT_ICR(pcc_io_base) = 0x88; - printf("aicr = 0x%x\n",PCC_ABRT_ICR(pcc_io_base)); -} - -/* timer2 (clock) driver */ - -/*const u_int timer_reload = 0; /* .4096 sec ? */ -/* const u_int timer_reload = 62870; 1/60 sec ? */ -const u_int timer_reload = 63936; /* 1/100 sec ? */ - -#if 0 -void -timer2_setup() -{ - u_int *io_base; - pcc_io_base = 0xfffe1000; /* should really be return of virtmem alloc */ - io_base = pcc_io_base; - printf("pcc_io_base %x io_base %x\n",pcc_io_base, io_base); - printf("PCC_TIMER2_PRE %x\n",&PCC_TIMER2_PRE(io_base)); - printf("PCC_TIMER2_CTR %x\n",&PCC_TIMER2_CTR(io_base)); - printf("PCC_TIMER2_ICR %x\n",&PCC_TIMER2_ICR(io_base)); - PCC_TIMER2_PRE(io_base) = timer_reload; - PCC_TIMER2_CTR(io_base) = 0x7; - PCC_TIMER2_ICR(io_base) = 0x8e; -} -#endif -void -timer2_intr(struct exception_frame *except) -{ - u_int *io_base; - pcc_io_base = 0xfffe1000; /* should really be return of virtmem alloc */ - io_base = pcc_io_base; - - if (0x80 && PCC_TIMER2_ICR(io_base)) { - PCC_TIMER2_ICR(io_base) = 0x8e; - /* hardclock(); */ - hardclock(except); - - } else { - printf("timer2_intr: vector called without interrupt\n"); - } - /* REALLY UGLY HACK */ - bugtty_chkinput(); - - return; -} diff --git a/sys/arch/mvme88k/dev/pcctwo.c b/sys/arch/mvme88k/dev/pcctwo.c deleted file mode 100644 index bdb07c82294..00000000000 --- a/sys/arch/mvme88k/dev/pcctwo.c +++ /dev/null @@ -1,252 +0,0 @@ -/* $NetBSD$ */ - -/* - * Copyright (c) 1995 Theo de Raadt - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by Theo de Raadt - * 4. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* - * VME16x PCC2 chip - */ -#include <sys/param.h> -#include <sys/conf.h> -#include <sys/ioctl.h> -#include <sys/proc.h> -#include <sys/user.h> -#include <sys/tty.h> -#include <sys/uio.h> -#include <sys/callout.h> -#include <sys/systm.h> -#include <sys/kernel.h> -#include <sys/syslog.h> -#include <sys/fcntl.h> -#include <sys/device.h> -#include <machine/cpu.h> -#include <machine/autoconf.h> -#include <dev/cons.h> -#include <mvme68k/mvme68k/isr.h> - -#include <mvme68k/dev/pcctworeg.h> - -struct pcctwosoftc { - struct device sc_dev; - caddr_t sc_vaddr; - caddr_t sc_paddr; - struct pcctworeg *sc_pcc2; - struct intrhand sc_nmiih; -}; - -void pcctwoattach __P((struct device *, struct device *, void *)); -int pcctwomatch __P((struct device *, void *, void *)); -int pcctwoabort __P((struct frame *)); - -struct cfdriver pcctwocd = { - NULL, "pcctwo", pcctwomatch, pcctwoattach, - DV_DULL, sizeof(struct pcctwosoftc), 0 -}; - -struct pcctworeg *sys_pcc2 = NULL; - -struct intrhand *pcctwointrs[PCC2_NVEC]; - -int -pcctwomatch(parent, vcf, args) - struct device *parent; - void *vcf, *args; -{ - struct cfdata *cf = vcf; - struct confargs *ca = args; - struct pcctworeg *pcc2; - - /* the PCC2 only exists on MVME16x's except the 162, right? */ - if (cputyp == CPU_162 || cputyp == CPU_147) - return (0); - pcc2 = (struct pcctworeg *)(IIOV(ca->ca_paddr) + PCC2_PCC2CHIP_OFF); - if (badbaddr(pcc2)) - return (0); - if (pcc2->pcc2_chipid != PCC2_CHIPID) - return (0); - return (1); -} - -int -pcctwo_print(args, bus) - void *args; - const char *bus; -{ - struct confargs *ca = args; - - printf(" offset 0x%x", ca->ca_offset); - if (ca->ca_ipl > 0) - printf(" ipl %d", ca->ca_ipl); - return (UNCONF); -} - -int -pcctwo_scan(parent, child, args) - struct device *parent; - void *child, *args; -{ - struct cfdata *cf = child; - struct pcctwosoftc *sc = (struct pcctwosoftc *)parent; - struct confargs *ca = args; - struct confargs oca; - - if (parent->dv_cfdata->cf_driver->cd_indirect) { - printf(" indirect devices not supported\n"); - return 0; - } - - bzero(&oca, sizeof oca); - oca.ca_paddr = sc->sc_paddr + cf->cf_loc[0]; - if (ISIIOVA(sc->sc_vaddr + cf->cf_loc[0])) - oca.ca_vaddr = sc->sc_vaddr + cf->cf_loc[0]; - else - oca.ca_vaddr = (caddr_t)-1; - oca.ca_offset = cf->cf_loc[0]; - oca.ca_ipl = cf->cf_loc[1]; - oca.ca_bustype = BUS_PCCTWO; - oca.ca_master = (void *)sc->sc_pcc2; - oca.ca_name = cf->cf_driver->cd_name; - if ((*cf->cf_driver->cd_match)(parent, cf, &oca) == 0) - return (0); - config_attach(parent, cf, &oca, pcctwo_print); - return (1); -} - -void -pcctwoattach(parent, self, args) - struct device *parent, *self; - void *args; -{ - struct confargs *ca = args; - struct pcctwosoftc *sc = (struct pcctwosoftc *)self; - extern u_long vectab[], pcctwotrap; - int i; - - if (sys_pcc2) - panic("pcc2 already attached!"); - - /* - * since we know ourself to land in intiobase land, - * we must adjust our address - */ - sc->sc_paddr = ca->ca_paddr; - sc->sc_vaddr = (caddr_t)IIOV(sc->sc_paddr); - sc->sc_pcc2 = (struct pcctworeg *)(sc->sc_vaddr + PCC2_PCC2CHIP_OFF); - sys_pcc2 = sc->sc_pcc2; - - printf(": rev %d\n", sc->sc_pcc2->pcc2_chiprev); - - /* - * make the PCCTWO interrupt range point to the pcc2 trap routine. - */ - for (i = 0; i < PCC2_NVEC; i++) { - vectab[PCC2_VECBASE+i] = (u_long)&pcctwotrap; - } - - sc->sc_pcc2->pcc2_genctl |= PCC2_GENCTL_IEN; /* global irq enable */ - - sys_pcc2->pcc2_gpioirq = PCC2_GPIO_PLTY | PCC2_IRQ_IEN | 0x7;/*lvl7*/ - sys_pcc2->pcc2_gpio = 0; /* do not turn on CR_O or CR_OE */ - sc->sc_nmiih.ih_fn = pcctwoabort; - sc->sc_nmiih.ih_arg = 0; - sc->sc_nmiih.ih_lvl = 7; - sc->sc_nmiih.ih_wantframe = 1; - /*sc->sc_mc->mc_abort .... enable at ipl 7 */ - pcctwointr_establish(PCC2V_GPIO, &sc->sc_nmiih); - - sc->sc_pcc2->pcc2_vecbase = PCC2_VECBASE; - config_search(pcctwo_scan, self, args); -} - -#ifndef PCCTWOINTR_ASM -/* - * pcctwointr: called from locore with the PC and evec from the trap frame. - */ -int -pcctwointr(pc, evec, frame) - int pc; - int evec; - void *frame; -{ - int vec = (evec & 0xfff) >> 2; /* XXX should be m68k macro? */ - extern u_long intrcnt[]; /* XXX from locore */ - struct intrhand *ih; - int r; - - vec = vec & 0xf; - if (vec >= PCC2_NVEC) - goto bail; - - cnt.v_intr++; - for (ih = pcctwointrs[vec]; ih; ih = ih->ih_next) { - if (ih->ih_wantframe) - r = (*ih->ih_fn)(frame); - else - r = (*ih->ih_fn)(ih->ih_arg); - if (r > 0) - return; - } -bail: - return (straytrap(pc, evec)); -} -#endif /* !PCCTWOINTR_ASM */ - -/* - * pcctwointr_establish: establish pcctwo interrupt - */ -int -pcctwointr_establish(vec, ih) - int vec; - struct intrhand *ih; -{ - if (vec >= PCC2_NVEC) { - printf("pcctwo: illegal vector: 0x%x\n", vec); - panic("pcctwointr_establish"); - } - - /* XXX should attach at tail */ - ih->ih_next = pcctwointrs[vec]; - pcctwointrs[vec] = ih; -} -int -pcctwoabort(frame) - struct frame *frame; -{ -#ifdef REALLY_CARE_ABOUT_DEBOUNCE - /* wait for it to debounce */ - while (sys_pcc2->pcc2_abortirq & PCC2_ABORT_ABS) - ; -#endif - - sys_pcc2->pcc2_gpioirq = sys_pcc2->pcc2_gpioirq | PCC2_IRQ_ICLR; - - nmihand(frame); - return (1); -} diff --git a/sys/arch/mvme88k/include/ansi.h b/sys/arch/mvme88k/include/ansi.h deleted file mode 100644 index d73b85a8f99..00000000000 --- a/sys/arch/mvme88k/include/ansi.h +++ /dev/null @@ -1,73 +0,0 @@ -/*- - * Copyright (c) 1990, 1993 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * from: @(#)ansi.h 8.2 (Berkeley) 1/4/94 - * $Id: ansi.h,v 1.1 1995/10/18 10:54:21 deraadt Exp $ - */ - -#ifndef _ANSI_H_ -#define _ANSI_H_ - -/* - * Types which are fundamental to the implementation and may appear in - * more than one standard header are defined here. Standard headers - * then use: - * #ifdef _BSD_SIZE_T_ - * typedef _BSD_SIZE_T_ size_t; - * #undef _BSD_SIZE_T_ - * #endif - */ -#define _BSD_CLOCK_T_ unsigned long /* clock() */ -#define _BSD_PTRDIFF_T_ int /* ptr1 - ptr2 */ -#define _BSD_SIZE_T_ unsigned int /* sizeof() */ -#define _BSD_SSIZE_T_ int /* byte count or error */ -#define _BSD_TIME_T_ long /* time() */ -#define _BSD_VA_LIST_ char * /* va_list */ - -/* - * Runes (wchar_t) is declared to be an ``int'' instead of the more natural - * ``unsigned long'' or ``long''. Two things are happening here. It is not - * unsigned so that EOF (-1) can be naturally assigned to it and used. Also, - * it looks like 10646 will be a 31 bit standard. This means that if your - * ints cannot hold 32 bits, you will be in trouble. The reason an int was - * chosen over a long is that the is*() and to*() routines take ints (says - * ANSI C), but they use _RUNE_T_ instead of int. By changing it here, you - * lose a bit of ANSI conformance, but your programs will still work. - * - * Note that _WCHAR_T_ and _RUNE_T_ must be of the same type. When wchar_t - * and rune_t are typedef'd, _WCHAR_T_ will be undef'd, but _RUNE_T remains - * defined for ctype.h. - */ -#define _BSD_WCHAR_T_ int /* wchar_t */ -#define _BSD_RUNE_T_ int /* rune_t */ - -#endif /* _ANSI_H_ */ diff --git a/sys/arch/mvme88k/include/asm.h b/sys/arch/mvme88k/include/asm.h deleted file mode 100644 index 84714410860..00000000000 --- a/sys/arch/mvme88k/include/asm.h +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1992 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ -/* - * HISTORY - * $Log: asm.h,v $ - * Revision 1.1 1995/10/18 10:54:22 deraadt - * Initial revision - * - * Revision 2.3 93/01/26 18:05:05 danner - * Added #ifndef file wrapper. - * [93/01/24 jfriedl] - * - * Revision 2.2 92/08/03 17:46:50 jfriedl - * Brought to m88k directory. - * [92/07/24 jfriedl] - * - * Revision 2.1.1.1 92/05/27 15:24:16 danner - * Move FLUSH_PIPELINE, REG_OFF definitions here. - * [92/05/17 danner] - * - * Revision 2.3 92/02/18 18:00:24 elf - * Typo correction (from Torbjorn Granlund <tege@sics.se>). - * [92/02/06 danner] - * - * moved RTE definition here - * [92/02/02 danner] - * - * Revision 2.2 91/07/09 23:16:20 danner - * Initial 3.0 Checkin - * [91/06/26 11:57:57 danner] - * - * Revision 2.2 91/04/05 13:55:26 mbj - * Initial code from the Omron 1.10 kernel release corresponding to X130. - * The Copyright has been adjusted to correspond to the understanding - * between CMU and the Omron Corporation. - * [91/04/04 rvb] - * - * Corrected ENTRY Macro to use NEWLINE instead of \\ Hack - * [91/03/07 danner] - * - */ - -/* - * File: m88k/asm.h - * - * This header file is intended to hold definitions useful for M88K - * assembly routines. - * - */ -#ifndef __M88K_ASM_H__ -#define __M88K_ASM_H__ - -#ifndef prepend_underbar -# ifdef __STDC__ -# define prepend_underbar(NAME) _##NAME -# else -# define prepend_underbar(NAME) _/**/NAME -# endif -#endif - -#define ENTRY(NAME) \ - align 4 NEWLINE prepend_underbar(NAME): NEWLINE global prepend_underbar(NAME) - -#define RTE NOP NEWLINE rte - -#define PID cr0 -#define PSR cr1 -#define EPSR cr2 -#define SSBR cr3 -#define SXIP cr4 -#define SNIP cr5 -#define SFIP cr6 -#define VBR cr7 -#define DMT0 cr8 -#define DMD0 cr9 -#define DMA0 cr10 -#define DMT1 cr11 -#define DMD1 cr12 -#define DMA1 cr13 -#define DMT2 cr14 -#define DMD2 cr15 -#define DMA2 cr16 -#define SR0 cr17 -#define SR1 cr18 -#define SR2 cr19 -#define SR3 cr20 -#define FPECR fcr0 -#define FPHS1 fcr1 -#define FPLS1 fcr2 -#define FPHS2 fcr3 -#define FPLS2 fcr4 -#define FPPT fcr5 -#define FPRH fcr6 -#define FPRL fcr7 -#define FPIT fcr8 -#define FPSR fcr62 -#define FPCR fcr63 - -/* - * At various times, there is the need to clear the pipeline (i.e. - * synchronize). A "tcnd ne0, r0, foo" will do that (because a trap - * instruction always synchronizes, and this particular instruction - * will never actually take the trap). - */ -#define FLUSH_PIPELINE tcnd ne0, r0, 0 -#define NOP or r0, r0, r0 - -/* REGister OFFset into the E.F. (exception frame) */ -#define REG_OFF(reg_num) ((reg_num) * 4) /* (num * sizeof(register int)) */ -#define GENREG_OFF(num) (REG_OFF(EF_R0 + (num))) /* GENeral REGister OFFset */ - -#if !defined(LABEL) -#define LABEL(name) name: global name NEWLINE -#define _LABEL(name) name: NEWLINE -#endif /* LABEL */ - -#endif /* __M88K_ASM_H__ */ diff --git a/sys/arch/mvme88k/include/asm_macro.h b/sys/arch/mvme88k/include/asm_macro.h deleted file mode 100644 index ac51ebefee6..00000000000 --- a/sys/arch/mvme88k/include/asm_macro.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ -/* - * HISTORY - * $Log: asm_macro.h,v $ - * Revision 1.1 1995/10/18 10:54:22 deraadt - * Initial revision - * - * Revision 2.2 93/01/26 18:07:26 danner - * Created. - * [93/01/24 jfriedl] - * - */ - -#ifndef __M88K_ASM_MACRO_H__ -#define __M88K_ASM_MACRO_H__ - -/* - ** Various compiler macros used for speed and efficiency. - ** Anyone can include. - */ - -/* - * PSR_TYPE is the type of the Process Status Register. - */ -typedef unsigned long m88k_psr_type; - -/* - * disable_interrupts_return_psr() - * - * The INTERRUPT_DISABLE bit is set in the PSR and the *PREVIOUS* - * PSR is returned. Intended to be used with set_psr() [below] as in: - * - * { - * m88k_psr_type psr; - * . - * . - * psr = disable_interrupts_return_psr(); - * . - * SHORT [time-wise] CRITICAL SECTION HERE - * . - * set_psr(psr); - * . - * . - */ -static inline m88k_psr_type disable_interrupts_return_psr(void) -{ - m88k_psr_type temp, oldpsr; - asm volatile ( - "ldcr %0, cr1 \n" - "set %1, %0, 1<1> \n" - "stcr %1, cr1 \n" - "tcnd ne0, r0, 0 " : "=r" (oldpsr), "=r" (temp)); - return oldpsr; -} -#define disable_interrupt() (void)disable_interrupts_return_psr() - -/* - * Sets the PSR. See comments above. - */ -static inline void set_psr(m88k_psr_type psr) -{ - asm volatile ("stcr %0, cr1" :: "r" (psr)); -} - -/* - * Enables interrupts. - */ -static inline m88k_psr_type enable_interrupts_return_psr(void) -{ - m88k_psr_type temp, oldpsr; /* need a temporary register */ - asm volatile ( - "ldcr %0, cr1 \n" - "clr %1, %0, 1<1> \n" - "stcr %1, cr1 " : "=r" (oldpsr), "=r" (temp)); - return oldpsr; -} -#define enable_interrupt() (void)enable_interrupts_return_psr() - -#define db_enable_interrupt enable_interrupt -#define db_disable_interrupt disable_interrupt - -/* - * flushes the data pipeline. - */ -static inline void flush_pipeline() -{ - asm volatile ("tcnd ne0, r0, 0"); -} -#define db_flush_pipeline flush_pipeline - -#endif /* __M88K_ASM_MACRO_H__ */ diff --git a/sys/arch/mvme88k/include/assert.h b/sys/arch/mvme88k/include/assert.h deleted file mode 100644 index c9e72557e77..00000000000 --- a/sys/arch/mvme88k/include/assert.h +++ /dev/null @@ -1,8 +0,0 @@ -#define assert(x) \ -({\ - if (!(x)) {\ - printf("assertion failure \"%s\" line %d file %s\n", \ - #x, __LINE__, __FILE__); \ - panic("assertion"); \ - } \ -}) diff --git a/sys/arch/mvme88k/include/assym.s b/sys/arch/mvme88k/include/assym.s deleted file mode 100644 index 1c61062f668..00000000000 --- a/sys/arch/mvme88k/include/assym.s +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef __GENASSYM_INCLUDED -#define __GENASSYM_INCLUDED 1 - -#ifdef ASSEMBLER -#define NEWLINE \\ -#endif -#define P_FORW 0 -#define P_BACK 4 -#define P_VMSPACE 32 -#define P_ADDR 240 -#define P_PRIORITY 208 -#define P_STAT 44 -#define P_WCHAN 96 -#define SRUN 2 -#define VM_PMAP 132 -#define V_INTR 12 -#define UPAGES 3 -#define PGSHIFT 12 -#define U_PROF 824 -#define U_PROFSCALE 836 -#define PCB_ONFAULT 328 -#define SIZEOF_PCB 332 -#define SYS_exit 1 -#define SYS_execve 59 -#define SYS_sigreturn 103 -#define EF_R0 0 -#define EF_R31 31 -#define EF_FPSR 32 -#define EF_FPCR 33 -#define EF_EPSR 34 -#define EF_SXIP 35 -#define EF_SFIP 37 -#define EF_SNIP 36 -#define EF_SSBR 38 -#define EF_DMT0 39 -#define EF_DMD0 40 -#define EF_DMA0 41 -#define EF_DMT1 42 -#define EF_DMD1 43 -#define EF_DMA1 44 -#define EF_DMT2 45 -#define EF_DMD2 46 -#define EF_DMA2 47 -#define EF_FPECR 48 -#define EF_FPHS1 49 -#define EF_FPLS1 50 -#define EF_FPHS2 51 -#define EF_FPLS2 52 -#define EF_FPPT 53 -#define EF_FPRH 54 -#define EF_FPRL 55 -#define EF_FPIT 56 -#define EF_VECTOR 57 -#define EF_MASK 58 -#define EF_MODE 59 -#define EF_RET 60 -#define EF_NREGS 62 -#define SIZEOF_EF 248 - -#endif /* __GENASSYM_INCLUDED */ diff --git a/sys/arch/mvme88k/include/autoconf.h b/sys/arch/mvme88k/include/autoconf.h deleted file mode 100644 index fc16b991c1a..00000000000 --- a/sys/arch/mvme88k/include/autoconf.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (c) 1993 Adam Glass - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by Adam Glass. - * 4. The name of the Author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY Adam Glass ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * $Header: /cvs/OpenBSD/src/sys/arch/mvme88k/include/autoconf.h,v 1.1 1995/10/18 10:54:22 deraadt Exp $ - */ - -int always_match __P((struct device *, struct cfdata *, void *)); - -#define DEVICE_UNIT(device) (device->dv_unit) -#define CFDATA_LOC(cfdata) (cfdata->cf_loc) diff --git a/sys/arch/mvme88k/include/board.h b/sys/arch/mvme88k/include/board.h deleted file mode 100644 index f53367b7cdf..00000000000 --- a/sys/arch/mvme88k/include/board.h +++ /dev/null @@ -1,78 +0,0 @@ -#ifndef _MACHINE_BOARD_H -#define _MACHINE_BOARD_H -/* - * VME187 CPU board constants - derived from Luna88k - */ - -/* - * Something to put append a 'U' to a long constant if it's C so that - * it'll be unsigned in both ANSI and traditional. - */ -#if defined(ASSEMBLER) -# define U(num) num -#else -# if defined(__STDC__) -# define U(num) num ## U -# else -# define U(num) num/**/U -# endif -#endif - -#define MAX_CPUS 1 /* no. of CPUs */ -#define MAX_CMMUS 2 /* 2 CMMUs - 1 data and 1 code */ - -#define SYSV_BASE U(0x00000000) /* system virtual base */ - -#define MAXU_ADDR U(0x40000000) /* size of user virtual space */ -#define MAXPHYSMEM U(0x10000000) /* max physical memory */ - -#define IO_SPACE_START U(0xFFF00000) /* start of local IO */ -#define IO_SPACE_END U(0xFFFFFFFF) /* end of io space */ - -#define ILLADDRESS U(0x0F000000) /* any faulty address */ -#define PROM_ADDR U(0xFF800000) /* PROM */ - -#define INT_PRI_LEVEL U(0xFFF4203E) /* interrupt priority level */ -#define INT_MASK_LEVEL U(0xFFF4203F) /* interrupt mask level */ - -#define LOCAL_IO_DEVS U(0xFFF00000) /* local IO devices */ -#define VMEA16 U(0xFFFF0000) /* VMEbus A16 */ - -#define PCC_ADDR U(0xFFF42000) /* PCCchip2 Regs */ -#define MEM_CTLR U(0xFFF43000) /* MEMC040 mem controller */ -#define SCC_ADDR U(0xFFF45000) /* Cirrus Chip */ -#define LANCE_ADDR U(0xFFF46000) /* 82596CA */ -#define SCSI_ADDR U(0xFFF47000) /* NCR 710 address */ -#define MK48T08_ADDR U(0xFFFC0000) /* BBRAM, TOD */ - -#define TOD_CAL_CTL U(0xFFFC1FF8) /* calendar control register */ -#define TOD_CAL_SEC U(0xFFFC1FF9) /* seconds */ -#define TOD_CAL_MIN U(0xFFFC1FFA) /* minutes */ -#define TOD_CAL_HOUR U(0xFFFC1FFB) /* hours */ -#define TOD_CAL_DOW U(0xFFFC1FFC) /* Day Of the Week */ -#define TOD_CAL_DAY U(0xFFFC1FFD) /* days */ -#define TOD_CAL_MON U(0xFFFC1FFE) /* months */ -#define TOD_CAL_YEAR U(0xFFFC1FFF) /* years */ - -#define CMMU_I U(0xFFF77000) /* CMMU instruction */ -#define CMMU_D U(0xFFF7F000) /* CMMU data */ - -/* interrupt vectors */ - -#define PPBSY 0x50 /* printer port busy */ -#define PPPE 0x51 /* printer port PE */ -#define PPSEL 0x52 /* printer port select */ -#define PPFLT 0x53 /* printer port fault */ -#define PPACK 0x54 /* printer port ack */ -#define SCSIIRQ 0x55 /* SCSI IRQ */ -#define LANCERR 0x56 /* LANC ERR */ -#define LANCIRQ 0x57 /* LANC IRQ */ -#define TIMER2IRQ 0x58 /* Tick Timer 2 vec */ -#define TIMER1IRQ 0x59 /* Tick Timer 1 vec */ -#define GPIOIRQ 0x5A /* GPIO IRQ */ -#define SRXEXIRQ 0x5C /* Serial RX Exception IRQ */ -#define SRMIRQ 0x5D /* Serial Modem IRQ */ -#define STXIRQ 0x5E /* Serial TX IRQ */ -#define SRXIRQ 0x5F /* Serial RX IRQ */ - -#endif /* _MACHINE_BOARD_H */ diff --git a/sys/arch/mvme88k/include/bug.h b/sys/arch/mvme88k/include/bug.h deleted file mode 100644 index b1c3686f655..00000000000 --- a/sys/arch/mvme88k/include/bug.h +++ /dev/null @@ -1,12 +0,0 @@ -#include <machine/bugio.h> - -struct bugenv { - int clun; - int dlun; - int ipl; - int ctlr; - int (*entry)(); - int cfgblk; - char *argstart; - char *argend; -}; diff --git a/sys/arch/mvme88k/include/bugio.h b/sys/arch/mvme88k/include/bugio.h deleted file mode 100644 index 74bb77bd336..00000000000 --- a/sys/arch/mvme88k/include/bugio.h +++ /dev/null @@ -1,62 +0,0 @@ -#include "sys/cdefs.h" - -struct bugdisk_io { - char clun; - char dlun; - short status; - void *addr; - int blkno; -#define fileno blkno - short nblks; - char flag; -#define FILEMARKFLAG 0x80 -#define IGNOREFILENO 0x02 -#define ENDOFFILE 0x01 - char am; -}; - -/* values are in BCD {upper nibble+lower nibble} */ - -struct bugrtc { - unsigned char Y; - unsigned char M; - unsigned char D; - unsigned char d; - unsigned char H; - unsigned char m; - unsigned char s; - unsigned char c; -}; - -/* Board ID - lots of info */ - -struct bugbrdid { - unsigned char eye[4]; - char rev; - char month; - char day; - char year; - short packetsize; - short dummy; - short brdno; - unsigned char brdsuf[2]; - char options[3]; - char family:4; - char cpu:4; - short clun; - short dlun; - short type; - short dev; - int option; -}; - -char buginchr __P((void)); -int buginstat __P((void)); -int bugoutchr __P((unsigned char)); -int bugoutstr __P((char *, char *)); -int bugpcrlf __P((void)); -int bugdskrd __P((struct bugdisk_io *)); -int bugdskwr __P((struct bugdisk_io *)); -int bugrtcrd __P((struct bugrtc *)); -int bugreturn __P((void)); -int bugbrdid __P((struct bugbrdid *)); diff --git a/sys/arch/mvme88k/include/cdefs.h b/sys/arch/mvme88k/include/cdefs.h deleted file mode 100644 index 286edf32784..00000000000 --- a/sys/arch/mvme88k/include/cdefs.h +++ /dev/null @@ -1,37 +0,0 @@ -/* $NetBSD: cdefs.h,v 1.2 1995/03/23 20:10:48 jtc Exp $ */ - -/* - * Written by J.T. Conklin <jtc@wimsey.com> 01/17/95. - * Public domain. - */ - -#ifndef _MACHINE_CDEFS_H_ -#define _MACHINE_CDEFS_H_ - -#ifdef __STDC__ -#define _C_LABEL(x) _STRING(_ ## x) -#else -#define _C_LABEL(x) _STRING(_/**/x) -#endif - -#ifdef __GNUC__ -#ifdef __STDC__ -#define __indr_reference(sym,alias) \ - __asm__(".stabs \"_" #alias "\",11,0,0,0"); \ - __asm__(".stabs \"_" #sym "\",1,0,0,0") -#define __warn_references(sym,msg) \ - __asm__(".stabs \"" msg "\",30,0,0,0"); \ - __asm__(".stabs \"_" #sym "\",1,0,0,0") -#else -#define __indr_reference(sym,alias) \ - __asm__(".stabs \"_/**/alias\",11,0,0,0"); \ - __asm__(".stabs \"_/**/sym\",1,0,0,0") -#define __warn_references(sym,msg) \ - __asm__(".stabs msg,30,0,0,0"); \ - __asm__(".stabs \"_/**/sym\",1,0,0,0") -#endif -#else -#define __warn_references(sym,msg) /* nothing */ -#endif - -#endif /* !_MACHINE_CDEFS_H_ */ diff --git a/sys/arch/mvme88k/include/cpu.h b/sys/arch/mvme88k/include/cpu.h deleted file mode 100644 index 39890d72b66..00000000000 --- a/sys/arch/mvme88k/include/cpu.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Copyright (c) 1992, 1993 - * The Regents of the University of California. All rights reserved. - * - * This software was developed by the Computer Systems Engineering group - * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and - * contributed to Berkeley. - * - * All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Lawrence Berkeley Laboratory. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#ifndef _CPU_H_ -#define _CPU_H_ - -/* - * CTL_MACHDEP definitinos. - */ -#define CPU_MAXID 1 /* no valid machdep ids */ - -#define CTL_MACHDEP_NAMES { \ - { 0, 0 }, \ -} - -#ifdef KERNEL - -#include <machine/psl.h> - -/* - * definitions of cpu-dependent requirements - * referenced in generic code - */ -#define COPY_SIGCODE /* copy sigcode above user stack in exec */ - -#define cpu_exec(p) /* nothing */ -#define cpu_wait(p) /* nothing */ -#define cpu_swapout(p) /* nothing */ - -/* - * See syscall() for an explanation of the following. Note that the - * locore bootstrap code follows the syscall stack protocol. The - * framep argument is unused. - */ -#define cpu_set_init_frame(p, fp) \ - (p)->p_md.md_tf = (struct trapframe *) \ - ((caddr_t)(p)->p_addr) - -/* - * Arguments to hardclock and gatherstats encapsulate the previous - * machine state in an opaque clockframe. - */ -struct clockframe { - int pc; /* program counter at time of interrupt */ - int sr; /* status register at time of interrupt */ - int ipl; /* mask level at the time of interrupt */ -}; - -#define CLKF_USERMODE(framep) (((framep)->sr & 80000000) == 0) -#define CLKF_BASEPRI(framep) ((framep)->ipl == 0) -#define CLKF_PC(framep) ((framep)->pc & ~3) -#define CLKF_INTR(framep) (0) - -#define SIR_NET 1 -#define SIR_CLOCK 2 - -#define setsoftnet() (ssir |= SIR_NET, want_ast = 1) -#define setsoftclock() (ssir |= SIR_CLOCK, want_ast = 1) - -#define siroff(x) (ssir &= ~x) - -int ssir; -int want_ast; - -/* - * Preempt the current process if in interrupt from user mode, - * or after the current trap/syscall if in system mode. - */ -int want_resched; /* resched() was called */ -#define need_resched() (want_resched = 1, want_ast = 1) - -/* - * Give a profiling tick to the current process when the user profiling - * buffer pages are invalid. On the sparc, request an ast to send us - * through trap(), marking the proc as needing a profiling tick. - */ -#define need_proftick(p) ((p)->p_flag |= P_OWEUPC, want_ast = 1) - -/* - * Notify the current process (p) that it has a signal pending, - * process as soon as possible. - */ -#define signotify(p) (want_ast = 1) - -#endif /* KERNEL */ -#endif /* _CPU_H_ */ diff --git a/sys/arch/mvme88k/include/cpus.h b/sys/arch/mvme88k/include/cpus.h deleted file mode 100644 index 14501d90f26..00000000000 --- a/sys/arch/mvme88k/include/cpus.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1992 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* - * - * HISTORY - */ -/* - Versions Idents for 88k family chips - */ - -#ifndef _M88K_CPUS_ -#define _M88K_CPUS_ - -/* - * cpu Processor Identification Register (PID). - */ -#ifndef ASSEMBLER -union cpupid { - unsigned cpupid; - struct { - unsigned - /*empty*/:16, - arc:8, - version:7, - master:1; - } m88100; - struct { - unsigned - id:8, - type:3, - version:5, - /*empty*/:16; - } m88200; -}; -#endif ASSEMBLER - -#define M88100 0 -#define M88200 5 -#define M88204 6 - -#endif _M88K_CPUS_ diff --git a/sys/arch/mvme88k/include/db_machdep.h b/sys/arch/mvme88k/include/db_machdep.h deleted file mode 100644 index c27653ab45f..00000000000 --- a/sys/arch/mvme88k/include/db_machdep.h +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ -/* - * HISTORY - */ - -/* - * Machine-dependent defined for the new kernel debugger - */ - -#ifndef _M88K_DB_MACHDEP_H_ -#define _M88K_DB_MACHDEP_H_ 1 - -#include <sys/types.h> -#include <vm/vm_prot.h> -#include <vm/vm_param.h> -#include <vm/vm_inherit.h> -#include <vm/lock.h> -#include <machine/pcb.h> /* m88100_saved_state */ -#include <machine/psl.h> -#include <machine/trap.h> - -#define BKPT_SIZE (4) /* number of bytes in bkpt inst. */ -#define BKPT_INST (0xF000D082U) /* tb0, 0,r0, vector 132 */ -#define BKPT_SET(inst) (BKPT_INST) - -/* Entry trap for the debugger - used for inline assembly breaks*/ -#define ENTRY_ASM "tb0 0, r0, 132" -#define DDB_ENTRY_TRAP_NO 132 - -typedef vm_offset_t db_addr_t; -typedef int db_expr_t; -typedef struct m88100_saved_state db_regs_t; -db_regs_t ddb_regs; /* register state */ -#define DDB_REGS (&ddb_regs) - -/* - * the low two bits of sxip, snip, sfip have valid bits - * in them that need to masked to get the correct addresses - */ - -#define m88k_pc(regs) \ -({ \ - int ret; \ - \ - if (regs->sxip & 2) /* is valid */ \ - ret = regs->sxip & ~3; \ - else if (regs->snip & 2) \ - ret = regs->snip & ~3; \ - else if (regs->sfip & 2) \ - ret = regs->sfip & ~3; \ - /* we are in trouble - none of the program counters is valid */ \ - ret; \ -}) - -/* - * This is an actual function due to the fact that the sxip - * or snip could be nooped out due to a jmp or rte - */ -#define PC_REGS(regs) (regs->sxip & 2) ? regs->sxip & ~3 : (regs->snip & 2 ? \ - regs->snip & ~3 : regs->sfip & ~3) - -#define pC_REGS(regs) (regs->sxip & 2) ? regs->sxip : (regs->snip & 2 ? \ - regs->snip : regs->sfip) -extern int db_noisy; -#define NOISY(x) if (db_noisy) x -#define NOISY2(x) if (db_noisy >= 2) x -#define NOISY3(x) if (db_noisy >= 3) x - -extern int quiet_db_read_bytes; - -/* These versions are not constantly doing SPL */ -#define cnmaygetc db_getc -#define cngetc db_getc -#define cnputc db_putc - -/* breakpoint/watchpoint foo */ -#define IS_BREAKPOINT_TRAP(type,code) ((type)==T_KDB_BREAK) -#if defined(T_WATCHPOINT) -#define IS_WATCHPOINT_TRAP(type,code) ((type)==T_KDB_WATCH) -#else -#define IS_WATCHPOINT_TRAP(type,code) 0 -#endif /* T_WATCHPOINT */ - -/* we don't want coff support */ -#define DB_NO_COFF 1 - -/* need software single step */ -#define SOFTWARE_SSTEP 1 - -/* - * Debugger can get to any address space - */ - -#define DB_ACCESS_LEVEL DB_ACCESS_ANY - -#define DB_VALID_KERN_ADDR(addr) (!badaddr((void*)(addr), 1)) -#define DB_VALID_ADDRESS(addr,user) \ - (user ? db_check_user_addr(addr) : DB_VALID_KERN_ADDR(addr)) - -/* instruction type checking - others are implemented in db_sstep.c */ - -#define inst_trap_return(ins) ((ins) == 0xf400fc00U) - -/* don't need to load symbols */ -#define DB_SYMBOLS_PRELOADED 1 - -/* machine specific commands have been added to ddb */ -#define DB_MACHINE_COMMANDS 1 -/* inst_return(ins) - is the instruction a function call return. - * Not mutually exclusive with inst_branch. Should be a jmp r1. */ -#define inst_return(I) (((I)&0xfffffbffU) == 0xf400c001U ? TRUE : FALSE) - -#ifdef __GNUC__ -/* - * inst_call - function call predicate: is the instruction a function call. - * Could be either bsr or jsr - */ -#define inst_call(I) ({ unsigned i = (I); \ - ((((i) & 0xf8000000U) == 0xc8000000U || /*bsr*/ \ - ((i) & 0xfffffbe0U) == 0xf400c800U) /*jsr*/ \ - ? TRUE : FALSE) \ -;}) - -/* - * This routine should return true for instructions that result in unconditonal - * transfers of the flow of control. (Unconditional Jumps, subroutine calls, - * subroutine returns, etc). - * - * Trap and return from trap should not be listed here. - */ -#define inst_unconditional_flow_transfer(I) ({ unsigned i = (I); \ - ((((i) & 0xf0000000U) == 0xc0000000U || /* br, bsr */ \ - ((i) & 0xfffff3e0U) == 0xf400c000U) /* jmp, jsr */ \ - ? TRUE: FALSE) \ -;}) - -/* Return true if the instruction has a delay slot. */ -#define db_branch_is_delayed(I) inst_delayed(I) - -#endif /* __GNUC__ */ - -#define db_printf_enter db_printing - -#endif /* _M88K_DB_MACHDEP_H_ */ diff --git a/sys/arch/mvme88k/include/disklabel.h b/sys/arch/mvme88k/include/disklabel.h deleted file mode 100644 index c7419657305..00000000000 --- a/sys/arch/mvme88k/include/disklabel.h +++ /dev/null @@ -1,94 +0,0 @@ -#ifndef _MACHINE_DISKLABEL_H_ -#define _MACHINE_DISKLABEL_H_ - -#define MAXPARTITIONS 16 - -/* number of boot pieces , ie xxboot bootxx */ -#define NUMBOOT 2 - -#define RAW_PART 2 /* Xd0c is raw part. */ - -/* - * used to encode disk minor numbers - * this should probably be moved to sys/disklabel.h - */ -#define DISKUNIT(dev) (minor(dev) / MAXPARTITIONS) -#define DISKPART(dev) (minor(dev) % MAXPARTITIONS) -#define MAKEDISKDEV(maj, unit, part) \ - (makedev((maj), ((unit) * MAXPARTITIONS) + (part))) - -struct cpu_disklabel { - /* VID */ - unsigned char vid_id[4]; - unsigned char vid_0[16]; - unsigned int vid_oss; - unsigned short vid_osl; - unsigned char vid_1[4]; - unsigned short vid_osa_u; - unsigned short vid_osa_l; - unsigned char vid_2[2]; - unsigned short partitions; - unsigned char vid_vd[16]; - unsigned long bbsize; - unsigned long magic1; /* 4 */ - unsigned short type; /* 2 */ - unsigned short subtype; /* 2 */ - unsigned char packname[16]; /* 16 */ - unsigned long flags; /* 4 */ - unsigned long drivedata[5]; /* 4 */ - unsigned long spare[5]; /* 4 */ - unsigned short checksum; /* 2 */ - - unsigned long secpercyl; /* 4 */ - unsigned long secperunit; /* 4 */ - unsigned long headswitch; /* 4 */ - - unsigned char vid_3[4]; - unsigned int vid_cas; - unsigned char vid_cal; - unsigned char vid_4_0[3]; - unsigned char vid_4[64]; - unsigned char vid_4_1[28]; - unsigned long sbsize; - unsigned char vid_mot[8]; - /* CFG */ - unsigned char cfg_0[4]; - unsigned short cfg_atm; - unsigned short cfg_prm; - unsigned short cfg_atw; - unsigned short cfg_rec; - - unsigned short sparespertrack; - unsigned short sparespercyl; - unsigned long acylinders; - unsigned short rpm; - unsigned short cylskew; - - unsigned char cfg_spt; - unsigned char cfg_hds; - unsigned short cfg_trk; - unsigned char cfg_ilv; - unsigned char cfg_sof; - unsigned short cfg_psm; - unsigned short cfg_shd; - unsigned char cfg_2[2]; - unsigned short cfg_pcom; - unsigned char cfg_3; - unsigned char cfg_ssr; - unsigned short cfg_rwcc; - unsigned short cfg_ecc; - unsigned short cfg_eatm; - unsigned short cfg_eprm; - unsigned short cfg_eatw; - unsigned char cfg_gpb1; - unsigned char cfg_gpb2; - unsigned char cfg_gpb3; - unsigned char cfg_gpb4; - unsigned char cfg_ssc; - unsigned char cfg_runit; - unsigned short cfg_rsvc1; - unsigned short cfg_rsvc2; - unsigned long magic2; - unsigned char cfg_4[192]; -}; -#endif _MACHINE_DISKLABEL_H_ diff --git a/sys/arch/mvme88k/include/endian.h b/sys/arch/mvme88k/include/endian.h deleted file mode 100644 index ce22d3d35bc..00000000000 --- a/sys/arch/mvme88k/include/endian.h +++ /dev/null @@ -1,90 +0,0 @@ -/* $OpenBSD: endian.h,v 1.2 1996/11/25 13:11:28 niklas Exp $ */ - -/* - * Copyright (c) 1987, 1991, 1993 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * from: @(#)endian.h 8.1 (Berkeley) 6/11/93 - */ - -#ifndef _ENDIAN_H_ -#define _ENDIAN_H_ - -/* - * Define the order of 32-bit words in 64-bit words. - */ -#define _QUAD_HIGHWORD 0 -#define _QUAD_LOWWORD 1 - -#ifndef _POSIX_SOURCE -/* - * Definitions for byte order, according to byte significance from low - * address to high. - */ - -#define LITTLE_ENDIAN 1234 /* LSB first: i386, vax */ -#define BIG_ENDIAN 4321 /* MSB first: 68000, 88000 ibm, net */ -#define PDP_ENDIAN 3412 /* LSB first in word, MSW first in int32_t */ - -#define BYTE_ORDER BIG_ENDIAN - -#include <sys/cdefs.h> - -__BEGIN_DECLS -u_int32_t htonl __P((u_int32_t)); -u_int16_t htons __P((u_int16_t)); -u_int32_t ntohl __P((u_int32_t)); -u_int16_t ntohs __P((u_int16_t)); -__END_DECLS - -/* - * Macros for network/external number representation conversion. - */ -#if BYTE_ORDER == BIG_ENDIAN && !defined(lint) -#define ntohl(x) (x) -#define ntohs(x) (x) -#define htonl(x) (x) -#define htons(x) (x) - -#define NTOHL(x) (x) -#define NTOHS(x) (x) -#define HTONL(x) (x) -#define HTONS(x) (x) - -#else - -#define NTOHL(x) (x) = ntohl((u_int32_t)x) -#define NTOHS(x) (x) = ntohs((u_int16_t)x) -#define HTONL(x) (x) = htonl((u_int32_t)x) -#define HTONS(x) (x) = htons((u_int16_t)x) -#endif -#endif /* ! _POSIX_SOURCE */ -#endif /* !_ENDIAN_H_ */ diff --git a/sys/arch/mvme88k/include/exception_vectors.h b/sys/arch/mvme88k/include/exception_vectors.h deleted file mode 100644 index 3df57e99088..00000000000 --- a/sys/arch/mvme88k/include/exception_vectors.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1991, 1992 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ - -#ifndef UNDEFINED -# define UNDEFINED unknown_handler -#endif -/* vector 0x00 (#0) */ word error_handler -/* vector 0x01 (#1) */ word interrupt_handler -/* vector 0x02 (#2) */ word instruction_access_handler -/* vector 0x03 (#3) */ word data_exception_handler -/* vector 0x04 (#4) */ word misaligned_handler -/* vector 0x05 (#5) */ word unimplemented_handler -/* vector 0x06 (#6) */ word privilege_handler -/* vector 0x07 (#7) */ word bounds_handler -/* vector 0x08 (#8) */ word divide_handler -/* vector 0x09 (#9) */ word overflow_handler -/* vector 0x0a (#10) */ word error_handler -/* vector 0x0b (#11) */ word UNDEFINED -/* vector 0x0c (#12) */ word UNDEFINED -/* vector 0x0d (#13) */ word UNDEFINED -/* vector 0x0e (#14) */ word UNDEFINED -/* vector 0x0f (#15) */ word UNDEFINED -/* vector 0x10 (#16) */ word UNDEFINED -/* vector 0x11 (#17) */ word UNDEFINED -/* vector 0x12 (#18) */ word UNDEFINED -/* vector 0x13 (#19) */ word UNDEFINED -/* vector 0x14 (#20) */ word UNDEFINED -/* vector 0x15 (#21) */ word UNDEFINED -/* vector 0x16 (#22) */ word UNDEFINED -/* vector 0x17 (#23) */ word UNDEFINED -/* vector 0x18 (#24) */ word UNDEFINED -/* vector 0x19 (#25) */ word UNDEFINED -/* vector 0x1a (#26) */ word UNDEFINED -/* vector 0x1b (#27) */ word UNDEFINED -/* vector 0x1c (#28) */ word UNDEFINED -/* vector 0x1d (#29) */ word UNDEFINED -/* vector 0x1e (#30) */ word UNDEFINED -/* vector 0x1f (#31) */ word UNDEFINED -/* vector 0x20 (#32) */ word UNDEFINED -/* vector 0x21 (#33) */ word UNDEFINED -/* vector 0x22 (#34) */ word UNDEFINED -/* vector 0x23 (#35) */ word UNDEFINED -/* vector 0x24 (#36) */ word UNDEFINED -/* vector 0x25 (#37) */ word UNDEFINED -/* vector 0x26 (#38) */ word UNDEFINED -/* vector 0x27 (#39) */ word UNDEFINED -/* vector 0x28 (#40) */ word UNDEFINED -/* vector 0x29 (#41) */ word UNDEFINED -/* vector 0x2a (#42) */ word UNDEFINED -/* vector 0x2b (#43) */ word UNDEFINED -/* vector 0x2c (#44) */ word UNDEFINED -/* vector 0x2d (#45) */ word UNDEFINED -/* vector 0x2e (#46) */ word UNDEFINED -/* vector 0x2f (#47) */ word UNDEFINED -/* vector 0x30 (#48) */ word UNDEFINED -/* vector 0x31 (#49) */ word UNDEFINED -/* vector 0x32 (#50) */ word UNDEFINED -/* vector 0x33 (#51) */ word UNDEFINED -/* vector 0x34 (#52) */ word UNDEFINED -/* vector 0x35 (#53) */ word UNDEFINED -/* vector 0x36 (#54) */ word UNDEFINED -/* vector 0x37 (#55) */ word UNDEFINED -/* vector 0x38 (#56) */ word UNDEFINED -/* vector 0x39 (#57) */ word UNDEFINED -/* vector 0x3a (#58) */ word UNDEFINED -/* vector 0x3b (#59) */ word UNDEFINED -/* vector 0x3c (#60) */ word UNDEFINED -/* vector 0x3d (#61) */ word UNDEFINED -/* vector 0x3e (#62) */ word UNDEFINED -/* vector 0x3f (#63) */ word UNDEFINED -/* vector 0x40 (#64) */ word UNDEFINED -/* vector 0x41 (#65) */ word UNDEFINED -/* vector 0x42 (#66) */ word UNDEFINED -/* vector 0x43 (#67) */ word UNDEFINED -/* vector 0x44 (#68) */ word UNDEFINED -/* vector 0x45 (#69) */ word UNDEFINED -/* vector 0x46 (#70) */ word UNDEFINED -/* vector 0x47 (#71) */ word UNDEFINED -/* vector 0x48 (#72) */ word UNDEFINED -/* vector 0x49 (#73) */ word UNDEFINED -/* vector 0x4a (#74) */ word UNDEFINED -/* vector 0x4b (#75) */ word UNDEFINED -/* vector 0x4c (#76) */ word UNDEFINED -/* vector 0x4d (#77) */ word UNDEFINED -/* vector 0x4e (#78) */ word UNDEFINED -/* vector 0x4f (#79) */ word UNDEFINED -/* vector 0x50 (#80) */ word UNDEFINED -/* vector 0x51 (#81) */ word UNDEFINED -/* vector 0x52 (#82) */ word UNDEFINED -/* vector 0x53 (#83) */ word UNDEFINED -/* vector 0x54 (#84) */ word UNDEFINED -/* vector 0x55 (#85) */ word UNDEFINED -/* vector 0x56 (#86) */ word UNDEFINED -/* vector 0x57 (#87) */ word UNDEFINED -/* vector 0x58 (#88) */ word UNDEFINED -/* vector 0x59 (#89) */ word UNDEFINED -/* vector 0x5a (#90) */ word UNDEFINED -/* vector 0x5b (#91) */ word UNDEFINED -/* vector 0x5c (#92) */ word UNDEFINED -/* vector 0x5d (#93) */ word UNDEFINED -/* vector 0x5e (#94) */ word UNDEFINED -/* vector 0x5f (#95) */ word UNDEFINED -/* vector 0x60 (#96) */ word UNDEFINED -/* vector 0x61 (#97) */ word UNDEFINED -/* vector 0x62 (#98) */ word UNDEFINED -/* vector 0x63 (#99) */ word UNDEFINED -/* vector 0x64 (#100) */ word UNDEFINED -/* vector 0x65 (#101) */ word UNDEFINED -/* vector 0x66 (#102) */ word UNDEFINED -/* vector 0x67 (#103) */ word UNDEFINED -/* vector 0x68 (#104) */ word UNDEFINED -/* vector 0x69 (#105) */ word UNDEFINED -/* vector 0x6a (#106) */ word UNDEFINED -/* vector 0x6b (#107) */ word UNDEFINED -/* vector 0x6c (#108) */ word UNDEFINED -/* vector 0x6d (#109) */ word UNDEFINED -/* vector 0x6e (#110) */ word UNDEFINED -/* vector 0x6f (#111) */ word UNDEFINED -/* vector 0x70 (#112) */ word UNDEFINED -/* vector 0x71 (#113) */ word UNDEFINED -/* vector 0x72 (#114) */ word fp_precise_handler -/* vector 0x73 (#115) */ word fp_imprecise_handler -/* vector 0x74 (#116) */ word unimplemented_handler -/* vector 0x75 (#117) */ word UNDEFINED -/* vector 0x76 (#118) */ word unimplemented_handler -/* vector 0x77 (#119) */ word UNDEFINED -/* vector 0x78 (#120) */ word unimplemented_handler -/* vector 0x79 (#121) */ word UNDEFINED -/* vector 0x7a (#122) */ word unimplemented_handler -/* vector 0x7b (#123) */ word UNDEFINED -/* vector 0x7c (#124) */ word unimplemented_handler -/* vector 0x7d (#125) */ word UNDEFINED -/* vector 0x7e (#126) */ word unimplemented_handler -/* vector 0x7f (#127) */ word UNDEFINED -/* vector 0x80 (#128) */ word syscall_handler -/* vector 0x81 (#129) */ word syscall_handler -/* vector 0x82 (#130) */ word break -/* vector 0x83 (#131) */ word trace -/* vector 0x84 (#132) */ word entry -#if defined(RAW_PRINTF) && RAW_PRINTF -/* vector 0x85 (#133) */ word user_raw_putstr /* for USER raw_printf() */ -/* vector 0x85 (#134) */ word user_raw_xpr /* for USER raw_xpr() */ -#endif diff --git a/sys/arch/mvme88k/include/exec.h b/sys/arch/mvme88k/include/exec.h deleted file mode 100644 index bbff3a67156..00000000000 --- a/sys/arch/mvme88k/include/exec.h +++ /dev/null @@ -1,337 +0,0 @@ -#ifndef __A_OUT_GNU_H__ -#define __A_OUT_GNU_H__ - -#include <machine/endian.h> - -#ifdef __cplusplus -extern "C" { -#endif - -#define __GNU_EXEC_MACROS__ - -#ifndef __STRUCT_EXEC_OVERRIDE__ - -struct exec -{ - unsigned a_midmag; /* Use macros N_MAGIC, etc for access */ -#define a_info a_midmag - unsigned a_text; /* size of text, in bytes */ - unsigned a_data; /* size of data, in bytes */ - unsigned a_bss; /* size of uninitialized data area, in bytes */ - unsigned a_syms; /* length of symbol table data, in bytes */ - unsigned a_entry; /* start address */ - unsigned a_trsize; /* size of reloc info for text, in bytes */ - unsigned a_drsize; /* size of reloc info for data, in bytes */ -}; - -#endif /* __STRUCT_EXEC_OVERRIDE__ */ - -#define MID_ZERO 0 /* unknown - implementation dependent */ -#define MID_SUN010 1 /* sun 68010/68020 binary */ -#define MID_SUN020 2 /* sun 68020-only binary */ -#define MID_PC386 100 /* 386 PC binary. (so quoth BFD) */ -#define MID_HP200 200 /* hp200 (68010) BSD binary */ -#define MID_I386 134 /* i386 BSD binary */ -#define MID_M68K 135 /* m68k BSD binary with 8K page sizes */ -#define MID_M68K4K 136 /* m68k BSD binary with 4K page sizes */ -#define MID_NS32532 137 /* ns32532 */ -#define MID_SPARC 138 /* sparc */ -#define MID_PMAX 139 /* pmax */ -#define MID_VAX 140 /* vax */ -#define MID_ALPHA 141 /* Alpha BSD binary */ -#define MID_M88K 151 /* m88k BSD binary */ -#define MID_HP300 300 /* hp300 (68020+68881) BSD binary */ -#define MID_HPUX 0x20C /* hp200/300 HP-UX binary */ - -/* these go in the N_MACHTYPE field */ -enum machine_type { -#if defined (M_OLDSUN2) - M__OLDSUN2 = M_OLDSUN2, -#else - M_OLDSUN2 = 0, -#endif -#if defined (M_68010) - M__68010 = M_68010, -#else - M_68010 = 1, -#endif -#if defined (M_68020) - M__68020 = M_68020, -#else - M_68020 = 2, -#endif -#if defined (M_SPARC) - M__SPARC = M_SPARC, -#else - M_SPARC = 3, -#endif - /* skip a bunch so we don't run into any of sun's numbers */ - M_386 = 100, - M_88K = 151 -}; - -#define N_GETMAGIC(ex) \ - ((ex).a_midmag & 0xffff) - -#define N_GETMID(ex) \ - (((ex).a_midmag >> 16)&0xff) -#if !defined (N_MAGIC) -#define N_MAGIC(exec) ((exec).a_info & 0xffff) -#endif -#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff)) -#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff) -#define N_SET_INFO(exec, magic, type, flags) \ - ((exec).a_info = ((magic) & 0xffff) \ - | (((int)(type) & 0xff) << 16) \ - | (((flags) & 0xff) << 24)) -#define N_SET_MAGIC(exec, magic) \ - ((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff))) - -#define N_SET_MACHTYPE(exec, machtype) \ - ((exec).a_info = \ - ((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16)) - -#define N_SET_FLAGS(exec, flags) \ - ((exec).a_info = \ - ((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24)) - -#ifndef OMAGIC -/* Code indicating object file or impure executable. */ -#define OMAGIC 0407 -/* Code indicating pure executable. */ -#define NMAGIC 0410 -/* Code indicating demand-paged executable. */ -#define ZMAGIC 0413 -#define QMAGIC 0314 /* "compact" demand load format; deprecated */ -#endif /* not OMAGIC */ - -#if !defined (N_BADMAG) -#define N_BADMAG(x) \ - (N_MAGIC(x) != OMAGIC && N_MAGIC(x) != NMAGIC \ - && N_MAGIC(x) != ZMAGIC) -#endif - -#define _N_BADMAG(x) \ - (N_MAGIC(x) != OMAGIC && N_MAGIC(x) != NMAGIC \ - && N_MAGIC(x) != ZMAGIC) - -#if !defined(sparc) && !defined(m88k) -#define _N_HDROFF(x) (SEGMENT_SIZE - sizeof (struct exec)) -#else -#define _N_HDROFF(x) (- sizeof (struct exec)) -#endif - -#if !defined (N_TXTOFF) -#define N_TXTOFF(x) \ - (N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : sizeof (struct exec)) -#endif - -#if !defined (N_DATOFF) -#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text) -#endif - -#if !defined (N_TRELOFF) -#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data) -#endif - -#if !defined (N_DRELOFF) -#define N_DRELOFF(x) (N_TRELOFF(x) + (x).a_trsize) -#endif - -#if !defined (N_SYMOFF) -#define N_SYMOFF(x) (N_DRELOFF(x) + (x).a_drsize) -#endif - -#if !defined (N_STROFF) -#define N_STROFF(x) (N_SYMOFF(x) + (x).a_syms) -#endif - -/* Address of text segment in memory after it is loaded. */ -#if !defined (N_TXTADDR) -#define N_TXTADDR(x) 0 -#endif - -/* Address of data segment in memory after it is loaded. - Note that it is up to you to define SEGMENT_SIZE - on machines not listed here. */ -#if defined (hp300) || defined (mips) || defined(m88k) -#ifndef PAGE_SIZE -#define PAGE_SIZE 4096 -#endif /* PAGE_SIZE */ -#endif -#if defined (sparc) || defined (NeXT) -#define PAGE_SIZE 0x2000 -#endif -#if defined (sony) || (defined (sun) && defined (mc68000)) -#define SEGMENT_SIZE 0x2000 -#endif /* Sony or 68k Sun. */ -#ifdef is68k -#define SEGMENT_SIZE 0x20000 -#endif -#if defined(m68k) && defined(PORTAR) -#define PAGE_SIZE 0x400 -#endif -#ifndef SEGMENT_SIZE -/* This used to be first in this paragraph and under: - if (defined(vax) || defined(hp300) || defined(pyr) || defined(sparc) \ - || (defined(m68k) && defined(PORTAR)) \ - || defined (NeXT) || defined (mips)) */ -#define SEGMENT_SIZE PAGE_SIZE -#endif -#ifndef PAGE_SIZE -/* This value is for i386-minix, but that has no predefine. - Making it default will only cause confusion on machines - which have no proper value defined. */ -#define PAGE_SIZE 16 -#endif - -#define PAGSIZ PAGE_SIZE -#define SEGSIZ SEGMENT_SIZE -#if !defined(__LDPGSZ) -#define __LDPGSZ PAGE_SIZE -#endif /* __LDPGSZ */ - -#define _N_SEGMENT_ROUND(x) (((x) + SEGMENT_SIZE - 1) & ~(SEGMENT_SIZE - 1)) - -#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text) - -#ifndef N_DATADDR -#define N_DATADDR(x) \ - (N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \ - : (_N_SEGMENT_ROUND (_N_TXTENDADDR(x)))) -#endif - -/* Address of bss segment in memory after it is loaded. */ -#if !defined (N_BSSADDR) -#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data) -#endif - -#if 0 -#if !defined (N_NLIST_DECLARED) -struct nlist { - union { - char *n_name; - struct nlist *n_next; - long n_strx; - } n_un; - unsigned char n_type; - char n_other; - short n_desc; - unsigned long n_value; -}; -#endif /* no N_NLIST_DECLARED. */ -#endif /* 0 */ - -#if !defined (N_UNDF) -#define N_UNDF 0 -#endif -#if !defined (N_ABS) -#define N_ABS 2 -#endif -#if !defined (N_TEXT) -#define N_TEXT 4 -#endif -#if !defined (N_DATA) -#define N_DATA 6 -#endif -#if !defined (N_BSS) -#define N_BSS 8 -#endif -#if !defined (N_COMM) -#define N_COMM 18 -#endif -#if !defined (N_FN) -#define N_FN 15 -#endif - -#if !defined (N_EXT) -#define N_EXT 1 -#endif -#if !defined (N_TYPE) -#define N_TYPE 036 -#endif -#if !defined (N_STAB) -#define N_STAB 0340 -#endif - -/* The following type indicates the definition of a symbol as being - an indirect reference to another symbol. The other symbol - appears as an undefined reference, immediately following this symbol. - - Indirection is asymmetrical. The other symbol's value will be used - to satisfy requests for the indirect symbol, but not vice versa. - If the other symbol does not have a definition, libraries will - be searched to find a definition. */ -#define N_INDR 0xa - -/* The following symbols refer to set elements. - All the N_SET[ATDB] symbols with the same name form one set. - Space is allocated for the set in the text section, and each set - element's value is stored into one word of the space. - The first word of the space is the length of the set (number of elements). - - The address of the set is made into an N_SETV symbol - whose name is the same as the name of the set. - This symbol acts like a N_DATA global symbol - in that it can satisfy undefined external references. */ - -/* These appear as input to LD, in a .o file. */ -#define N_SETA 0x14 /* Absolute set element symbol */ -#define N_SETT 0x16 /* Text set element symbol */ -#define N_SETD 0x18 /* Data set element symbol */ -#define N_SETB 0x1A /* Bss set element symbol */ - -/* This is output from LD. */ -#define N_SETV 0x1C /* Pointer to set vector in data area. */ - -#if !defined (N_RELOCATION_INFO_DECLARED) -/* This structure describes a single relocation to be performed. - The text-relocation section of the file is a vector of these structures, - all of which apply to the text section. - Likewise, the data-relocation section applies to the data section. */ - -struct relocation_info -{ - /* Address (within segment) to be relocated. */ - int r_address; - /* The meaning of r_symbolnum depends on r_extern. */ - unsigned int r_symbolnum:24; - /* Nonzero means value is a pc-relative offset - and it should be relocated for changes in its own address - as well as for changes in the symbol or section specified. */ - unsigned int r_pcrel:1; - /* Length (as exponent of 2) of the field to be relocated. - Thus, a value of 2 indicates 1<<2 bytes. */ - unsigned int r_length:2; - /* 1 => relocate with value of symbol. - r_symbolnum is the index of the symbol - in file's the symbol table. - 0 => relocate with the address of a segment. - r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS - (the N_EXT bit may be set also, but signifies nothing). */ - unsigned int r_extern:1; - /* Four bits that aren't used, but when writing an object file - it is desirable to clear them. */ - unsigned int r_pad:4; -}; -#endif /* no N_RELOCATION_INFO_DECLARED. */ -#define M_32_SWAP(x) (x) -#define M_16_SWAP(x) (x) -#define M_8_SWAP(x) (x) - - -#ifdef __cplusplus -} -#endif - -#define ELF_TARG_CLASS ELFCLASS32 -#define ELF_TARG_DATA ELFDATA2MSB -#define ELF_TARG_MACH EM_88K - -#define _NLIST_DO_AOUT -#define _NLIST_DO_ELF - -#define _KERN_DO_AOUT -#define _KERN_DO_ELF - -#endif /* __A_OUT_GNU_H__ */ diff --git a/sys/arch/mvme88k/include/foo b/sys/arch/mvme88k/include/foo deleted file mode 100644 index 6d19c6950ab..00000000000 --- a/sys/arch/mvme88k/include/foo +++ /dev/null @@ -1,124 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ -/* - * HISTORY - * $Log: foo,v $ - * Revision 1.1 1995/10/18 10:54:24 deraadt - * Initial revision - * - * Revision 2.6 93/01/26 18:01:15 danner - * Added #ifndef file wrapper. - * [93/01/25 jfriedl] - * - * Revision 2.5 93/01/14 17:53:26 danner - * u_int -> unsigned - * [92/12/02 jfriedl] - * - * Revision 2.4 92/08/03 17:52:34 jfriedl - * changed ifndef to depend on ASSEMBLER. [danner] - * - * Revision 2.3 92/05/21 17:23:01 jfriedl - * Appended 'U' to constants that would otherwise be signed. - * [92/05/16 jfriedl] - * - * Revision 2.2 92/02/18 18:03:52 elf - * Moved from luna88k - * [92/01/20 danner] - * - */ - -#ifndef __MOTOROLA_M88K_M88100_PSL_H__ -#define __MOTOROLA_M88K_M88100_PSL_H__ -/* - * 88100 control registers - */ - -/* - * processor identification register (PID) - */ -#define PID_ARN 0x0000FF00U /* architectural revision number */ -#define PID_VN 0x000000FEU /* version number */ -#define PID_MC 0x00000001U /* master/checker */ - -/* - * processor status register - */ -#define PSR_MODE 0x80000000U /* supervisor/user mode */ -#define PSR_BO 0x40000000U /* byte-ordering 0:big 1:little */ -#define PSR_SER 0x20000000U /* serial mode */ -#define PSR_C 0x10000000U /* carry */ -#define PSR_SFD 0x000003F0U /* SFU disable */ -#define PSR_SFD1 0x00000008U /* SFU1 (FPU) disable */ -#define PSR_MXM 0x00000004U /* misaligned access enable */ -#define PSR_IND 0x00000002U /* interrupt disable */ -#define PSR_SFRZ 0x00000001U /* shadow freeze */ - -/* - * This is used in ext_int() and hard_clock(). - */ -#define PSR_IPL 0x00001000 /* for basepri */ -#define PSR_IPL_LOG 12 /* = log2(PSR_IPL) */ - -#define PSR_MODE_LOG 31 /* = log2(PSR_MODE) */ -#define PSR_BO_LOG 30 /* = log2(PSR_BO) */ -#define PSR_SER_LOG 29 /* = log2(PSR_SER) */ -#define PSR_SFD1_LOG 3 /* = log2(PSR_SFD1) */ -#define PSR_MXM_LOG 2 /* = log2(PSR_MXM) */ -#define PSR_IND_LOG 1 /* = log2(PSR_IND) */ -#define PSR_SFRZ_LOG 0 /* = log2(PSR_SFRZ) */ - -#define PSR_SUPERVISOR (PSR_MODE | PSR_SFD) -#define PSR_USER (PSR_SFD) -#define PSR_SET_BY_USER (PSR_BO | PSR_SER | PSR_C | PSR_MXM) - -#ifndef ASSEMBLER -struct psr { - unsigned - psr_mode: 1, - psr_bo : 1, - psr_ser : 1, - psr_c : 1, - :18, - psr_sfd : 6, - psr_sfd1: 1, - psr_mxm : 1, - psr_ind : 1, - psr_sfrz: 1; -}; -#endif - -#define FIP_V 0x00000002U /* valid */ -#define FIP_E 0x00000001U /* exception */ -#define FIP_ADDR 0xFFFFFFFCU /* address mask */ -#define NIP_V 0x00000002U /* valid */ -#define NIP_E 0x00000001U /* exception */ -#define NIP_ADDR 0xFFFFFFFCU /* address mask */ -#define XIP_V 0x00000002U /* valid */ -#define XIP_E 0x00000001U /* exception */ -#define XIP_ADDR 0xFFFFFFFCU /* address mask */ - -#endif /* __MOTOROLA_M88K_M88100_PSL_H__ */ diff --git a/sys/arch/mvme88k/include/limits.h b/sys/arch/mvme88k/include/limits.h deleted file mode 100644 index abd96bd03e3..00000000000 --- a/sys/arch/mvme88k/include/limits.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright (c) 1988, 1993 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * from: @(#)limits.h 8.3 (Berkeley) 1/4/94 - * $Id: limits.h,v 1.1 1995/10/18 10:54:21 deraadt Exp $ - */ - -#define CHAR_BIT 8 /* number of bits in a char */ -#define MB_LEN_MAX 6 /* Allow 31 bit UTF2 */ - - -#define CLK_TCK 60 /* ticks per second */ - -/* - * According to ANSI (section 2.2.4.2), the values below must be usable by - * #if preprocessing directives. Additionally, the expression must have the - * same type as would an expression that is an object of the corresponding - * type converted according to the integral promotions. The subtraction for - * INT_MIN and LONG_MIN is so the value is not unsigned; 2147483648 is an - * unsigned int for 32-bit two's complement ANSI compilers (section 3.1.3.2). - * These numbers work for pcc as well. The UINT_MAX and ULONG_MAX values - * are written as hex so that GCC will be quiet about large integer constants. - */ -#define SCHAR_MAX 127 /* min value for a signed char */ -#define SCHAR_MIN (-128) /* max value for a signed char */ - -#define UCHAR_MAX 255 /* max value for an unsigned char */ -#define CHAR_MAX 127 /* max value for a char */ -#define CHAR_MIN (-128) /* min value for a char */ - -#define USHRT_MAX 65535 /* max value for an unsigned short */ -#define SHRT_MAX 32767 /* max value for a short */ -#define SHRT_MIN (-32768) /* min value for a short */ - -#define UINT_MAX 0xffffffff /* max value for an unsigned int */ -#define INT_MAX 2147483647 /* max value for an int */ -#define INT_MIN (-2147483647-1) /* min value for an int */ - -#define ULONG_MAX 0xffffffff /* max value for an unsigned long */ -#define LONG_MAX 2147483647 /* max value for a long */ -#define LONG_MIN (-2147483647-1) /* min value for a long */ - -#if !defined(_ANSI_SOURCE) -#define SSIZE_MAX INT_MAX /* max value for a ssize_t */ - -#if !defined(_POSIX_SOURCE) -#define SIZE_T_MAX UINT_MAX /* max value for a size_t */ - -/* GCC requires that quad constants be written as expressions. */ -#define UQUAD_MAX ((u_quad_t)0-1) /* max value for a uquad_t */ - /* max value for a quad_t */ -#define QUAD_MAX ((quad_t)(UQUAD_MAX >> 1)) -#define QUAD_MIN (-QUAD_MAX-1) /* min value for a quad_t */ - -#endif /* !_POSIX_SOURCE */ -#endif /* !_ANSI_SOURCE */ diff --git a/sys/arch/mvme88k/include/locore.h b/sys/arch/mvme88k/include/locore.h deleted file mode 100644 index cce0671b2f8..00000000000 --- a/sys/arch/mvme88k/include/locore.h +++ /dev/null @@ -1,301 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ -/* "locore.h" Omron Corporation - ********************************************************************** - * This file created by Omron Corporation, 1990. - * - * HISTORY - * - * - ********************************************************************** - * - * This file contains defines and such used by (most of) the assembly - * routines for Omron's Luna88 Mach system. It also may be included by - * some C language files. - * - ********************************************************************** - * NOTE: Any assembly file that includes this one must define ASSEMBLER first - * - */ - -#ifndef __MACHINE_LOCORE_H__ -#define __MACHINE_LOCORE_H__ - - -/* - ********************************************************************** - SYNTACTICAL AND SEMANTIC DOO-DADS - ********************************************************************** - */ -/* - * NEWLINE is defined in 'assmy.s' in the object area to be a double - * backslash, which 'as' interprets the same as '\n' - */ - -/* - * If this has been included in an assembly file, make sure - * LOCORE is defined. Always make sure KERNEL is defined. - */ -#if defined(ASSEMBLER) && !defined(LOCORE) -# define LOCORE -#endif -#if !defined(KERNEL) -# define KERNEL -#endif - -/* Define EH_DEBUG to be non-zero to compile-in various debugging things */ -#ifndef EH_DEBUG -#define EH_DEBUG 0 -#endif EH_DEBUG - -/* this gives the offsets into various structures of various elements, etc */ -#include "assym.s" - -/* - * LABEL(name) - * Defines the name to be a label visible to the world. - * - * _LABEL(name) - * Defines one visible only to the file, unless debugging - * is enabled, in which case it's visible to the world (and - * hence to debuggers, and such). - */ -#define LABEL(name) name: global name NEWLINE -#if EH_DEBUG -# define _LABEL(name) name: global name NEWLINE -#else -# define _LABEL(name) name: NEWLINE -#endif - - -/* - * Useful in some situations. - * NOTE: If ARG1 or ARG2 are r2 or r3, strange things may happen. Watch out! - */ -#define CALL(NAME, ARG1, ARG2) \ - subu r31, r31, 32 NEWLINE \ - or r2, r0, ARG1 NEWLINE \ - bsr.n NAME NEWLINE \ - or r3, r0, ARG2 NEWLINE \ - addu r31, r31, 32 - -/* - ********************************************************************** - SYMBOLIC CONSTANTS AND VALUES and other important things - ********************************************************************** - */ - -/* - * SR1 - CPU FLAGS REGISTER - * - * SR1 contains flags about the current CPU status. - * - * The lowest FLAG_CPU_FIELD_WIDTH bits hold the cpu number (currently 0-3). - * - * - * The bit FLAG_IGNORE_DATA_EXCEPTION indicates that any data exceptions - * should be ignored (well, at least treated in a special way). - * The bit FLAG_INTERRUPT_EXCEPTION indicates that the current exception - * is the interrupt exception. Such information can be gotten - * in other ways, but having it in the flags makes it easy for the - * exception handler to check quickly. - * The bit FLAG_ENABLING_FPU indicates that the exception handler is - * in the process of enabling the FPU (so that an exception can - * be serviced). This is needed because enabling the FPU can - * cause other exceptions to happen, and the whole system is - * in a rather precarious state and so special cautions must - * be taken. - */ -#define FLAG_CPU_FIELD_WIDTH 4 /* must be <= 12 */ - -#define FLAG_IGNORE_DATA_EXCEPTION 5 /* bit number 5 */ -#define FLAG_INTERRUPT_EXCEPTION 6 /* bit number 6 */ -#define FLAG_ENABLING_FPU 7 /* bit number 7 */ - - -/* REGister OFFset into the E.F. (exception frame) */ -#define REG_OFF(reg_num) ((reg_num) * 4) /* (num * sizeof(register int)) */ -#define GENREG_OFF(num) (REG_OFF(EF_R0 + (num))) /* GENeral REGister OFFset */ - - -#define GENERAL_BREATHING_ROOM /* arbitrarily */ 200 -#define KERNEL_STACK_BREATHING_ROOM \ - (GENERAL_BREATHING_ROOM + SIZEOF_STRUCT_PCB + SIZEOF_STRUCT_UTHREAD) - -/* - * Some registers used during the setting up of the new exception frame. - * Don't choose r1, r30, or r31 for any of them. - * - * Also, if any are 'r2' or 'r3', be careful using with CALL above! - */ -#define FLAGS r2 -#define TMP r3 -#define TMP2 r10 -#define TMP3 r11 -#define SAVE_TMP2 st r10, r31, GENREG_OFF(10) -#define SAVE_TMP3 st r11, r31, GENREG_OFF(11) -#define RESTORE_TMP2 ld r10, r31, GENREG_OFF(10) -#define RESTORE_TMP3 ld r11, r31, GENREG_OFF(11) - - -/* alternate CPU control register names */ -#define PID cr0 -#define PSR cr1 -#define EPSR cr2 -#define SSBR cr3 -#define SXIP cr4 -#define SNIP cr5 -#define SFIP cr6 -#define VBR cr7 -#define DMT0 cr8 -#define DMD0 cr9 -#define DMA0 cr10 -#define DMT1 cr11 -#define DMD1 cr12 -#define DMA1 cr13 -#define DMT2 cr14 -#define DMD2 cr15 -#define DMA2 cr16 -#define SR0 cr17 -#define SR1 cr18 -#define SR2 cr19 -#define SR3 cr20 -#define FPECR fcr0 -#define FPHS1 fcr1 -#define FPLS1 fcr2 -#define FPHS2 fcr3 -#define FPLS2 fcr4 -#define FPPT fcr5 -#define FPRH fcr6 -#define FPRL fcr7 -#define FPIT fcr8 -#define FPSR fcr62 -#define FPCR fcr63 - -/* - * Info about the PSR - */ -#define PSR_SHADOW_FREEZE_BIT 0 -#define PSR_INTERRUPT_DISABLE_BIT 1 -#define PSR_FPU_DISABLE_BIT 3 -#define PSR_BIG_ENDIAN_MODE 30 -#define PSR_SUPERVISOR_MODE_BIT 31 - -/* - * Status bits for an SXIP/SNIP/SFIP address. - */ -#define RTE_VALID_BIT 1 -#define RTE_ERROR_BIT 0 - -/* - * Info about DMT0/DMT1/DMT2 - */ -#define DMT_VALID_BIT 0 -#define DMT_WRITE_BIT 1 -#define DMT_LOCK_BIT 12 -#define DMT_DOUBLE_BIT 13 -#define DMT_DAS_BIT 14 -#define DMT_DREG_OFFSET 7 -#define DMT_DREG_WIDTH 5 - -/* - * Bits for eh_debug. - */ -#define DEBUG_INTERRUPT_BIT 0 -#define DEBUG_DATA_BIT 1 -#define DEBUG_INSTRUCTION_BIT 2 -#define DEBUG_MISALIGN_BIT 3 -#define DEBUG_UNIMP_BIT 4 -#define DEBUG_DIVIDE_BIT 5 -#define DEBUG_OF_BIT 6 -#define DEBUG_FPp_BIT 7 -#define DEBUG_FPi_BIT 8 -#define DEBUG_SYSCALL_BIT 9 -#define DEBUG_MACHSYSCALL_BIT 10 -#define DEBUG_UNIMPLEMENTED_BIT 11 -#define DEBUG_PRIVILEGE_BIT 12 -#define DEBUG_BOUNDS_BIT 13 -#define DEBUG_OVERFLOW_BIT 14 -#define DEBUG_ERROR_BIT 15 -#define DEBUG_SIGSYS_BIT 16 -#define DEBUG_SIGTRAP_BIT 17 -#define DEBUG_BREAK_BIT 18 -#define DEBUG_TRACE_BIT 19 -#define DEBUG_KDB_BIT 20 -#define DEBUG_JKDB_BIT 21 -#define DEBUG_BUGCALL_BIT 22 - -#define DEBUG_UNKNOWN_BIT 31 - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -#define YES 1 -#define NO 0 - -#define SCSI_INTS 0x10 -#define SCSI_SSTS 0x18 -#define SCSI_DREG 0x28 - -/* change software timer for 8mm device support -- 90/08/21 CEC OKUI */ -#define SCSI_WAIT 0x5000000 - -/* - * At various times, there is the need to clear the pipeline (i.e. - * synchronize). A "tcnd ne0, r0, foo" will do that (because a trap - * instruction always synchronizes, and this particular instruction - * will never actually take the trap). - */ -#define FLUSH_PIPELINE tcnd ne0, r0, 0 - -/* - * NOP -- NO-Operation. - * - * A do-nothing one clock doesn't-touch-the-scoreboard type of instruction, - * in case one's needed (sometimes useful for debugging). - */ -#define NOP or r0, r0, r0 - -/* - * These things for vector_init.c and locore.c - */ -#if defined(ASSEMBLER) -# define PREDEFINED_BY_ROM 0xffffffff -# define END_OF_VECTOR_LIST 0xfffffffe -#else -# define PREDEFINED_BY_ROM 0xffffffffU -# define END_OF_VECTOR_LIST 0xfffffffeU -#endif - -/* - * Define ERROR__XXX_USR if the xxx.usr bug (mask C82N) is present. - * This implements the workaround. - */ -#define ERRATA__XXX_USR 1 - -#define USERMODE(x) (!(x & (1 << PSR_SUPERVISOR_MODE_BIT))) - -#endif /* __MACHINE_LOCORE_H__ */ diff --git a/sys/arch/mvme88k/include/m88100.h b/sys/arch/mvme88k/include/m88100.h deleted file mode 100644 index eb047bb08e0..00000000000 --- a/sys/arch/mvme88k/include/m88100.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1992 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* - * HISTORY - */ -/* - * M88100 flags - */ - -#ifndef _M88100_H_ -#define _M88100_H_ - - -/* - * 88100 RISC definitions - */ - -/* DMT0, DMT1, DMT2 */ -#define DMT_BO 0x00008000 /* Byte-Ordering */ -#define DMT_DAS 0x00004000 /* Data Access Space */ -#define DMT_DOUB1 0x00002000 /* Double Word */ -#define DMT_LOCKBAR 0x00001000 /* Bud Lock */ -#define DMT_DREG 0x00000F80 /* Destination Registers 5bits */ -#define DMT_SIGNED 0x00000040 /* Sign-Extended Bit */ -#define DMT_EN 0x0000003C /* Byte Enable Bit */ -#define DMT_WRITE 0x00000002 /* Read/Write Transaction Bit */ -#define DMT_VALID 0x00000001 /* Valid Transaction Bit */ - -#ifndef ASSEMBLER -#include "sys/types.h" - -struct dmt_reg { - unsigned int :16, - dmt_bo:1, - dmt_das:1, - dmt_doub1:1, - dmt_lockbar:1, - dmt_dreg:5, - dmt_signed:1, - dmt_en:4, - dmt_write:1, - dmt_valid:1; -}; -#endif - -#endif _M88100_H_ diff --git a/sys/arch/mvme88k/include/m882xx.h b/sys/arch/mvme88k/include/m882xx.h deleted file mode 100644 index 4c9759db1bc..00000000000 --- a/sys/arch/mvme88k/include/m882xx.h +++ /dev/null @@ -1,259 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1992 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* - * HISTORY - * - */ - - -#ifndef __MACHINE_M882XX_H__ -#define __MACHINE_M882XX_H__ - -#ifndef ASSEMBLER -# include <machine/mmu.h> /* batc_template_t */ -#endif - -#include <machine/board.h> - -/* - * 88200 CMMU definitions - */ -#define CMMU_IDR 0x000 /* CMMU id register */ -#define CMMU_SCR 0x004 /* system command register */ -#define CMMU_SSR 0x008 /* system status register */ -#define CMMU_SAR 0x00C /* system address register */ -#define CMMU_SCTR 0x104 /* system control register */ -#define CMMU_PFSR 0x108 /* P bus fault status register */ -#define CMMU_PFAR 0x10C /* P bus fault address register */ -#define CMMU_SAPR 0x200 /* supervisor area pointer register */ -#define CMMU_UAPR 0x204 /* user area pointer register */ -#define CMMU_BWP0 0x400 /* block ATC writer port 0 */ -#define CMMU_BWP1 0x404 /* block ATC writer port 1 */ -#define CMMU_BWP2 0x408 /* block ATC writer port 2 */ -#define CMMU_BWP3 0x40C /* block ATC writer port 3 */ -#define CMMU_BWP4 0x410 /* block ATC writer port 4 */ -#define CMMU_BWP5 0x414 /* block ATC writer port 5 */ -#define CMMU_BWP6 0x418 /* block ATC writer port 6 */ -#define CMMU_BWP7 0x41C /* block ATC writer port 7 */ -#define CMMU_CDP0 0x800 /* cache data port 0 */ -#define CMMU_CDP1 0x804 /* cache data port 1 */ -#define CMMU_CDP2 0x808 /* cache data port 2 */ -#define CMMU_CDP3 0x80C /* cache data port 3 */ -#define CMMU_CTP0 0x840 /* cache tag port 0 */ -#define CMMU_CTP1 0x844 /* cache tag port 1 */ -#define CMMU_CTP2 0x848 /* cache tag port 2 */ -#define CMMU_CTP3 0x84C /* cache tag port 3 */ -#define CMMU_CSSP 0x880 /* cache set status register */ - -/* 88204 CMMU definitions */ -#define CMMU_CSSP0 0x880 /* cache set status register */ -#define CMMU_CSSP1 0x890 /* cache set status register */ -#define CMMU_CSSP2 0x8A0 /* cache set status register */ -#define CMMU_CSSP3 0x8B0 /* cache set status register */ - -/* CMMU systerm commands */ -#define CMMU_FLUSH_USER_LINE 0x30 /* flush PATC */ -#define CMMU_FLUSH_USER_PAGE 0x31 -#define CMMU_FLUSH_USER_SEGMENT 0x32 -#define CMMU_FLUSH_USER_ALL 0x33 -#define CMMU_FLUSH_SUPER_LINE 0x34 -#define CMMU_FLUSH_SUPER_PAGE 0x35 -#define CMMU_FLUSH_SUPER_SEGMENT 0x36 -#define CMMU_FLUSH_SUPER_ALL 0x37 -#define CMMU_PROBE_USER 0x20 /* probe user address */ -#define CMMU_PROBE_SUPER 0x24 /* probe supervisor address */ -#define CMMU_FLUSH_CACHE_INV_LINE 0x14 /* data cache invalidate */ -#define CMMU_FLUSH_CACHE_INV_PAGE 0x15 -#define CMMU_FLUSH_CACHE_INV_SEGMENT 0x16 -#define CMMU_FLUSH_CACHE_INV_ALL 0x17 -#define CMMU_FLUSH_CACHE_CB_LINE 0x18 /* data cache copyback */ -#define CMMU_FLUSH_CACHE_CB_PAGE 0x19 -#define CMMU_FLUSH_CACHE_CB_SEGMENT 0x1A -#define CMMU_FLUSH_CACHE_CB_ALL 0x1B -#define CMMU_FLUSH_CACHE_CBI_LINE 0x1C /* copyback and invalidate */ -#define CMMU_FLUSH_CACHE_CBI_PAGE 0x1D -#define CMMU_FLUSH_CACHE_CBI_SEGMENT 0x1E -#define CMMU_FLUSH_CACHE_CBI_ALL 0x1F - -/* CMMU system control command */ -#define CMMU_SCTR_PE 0x00008000 /* parity enable */ -#define CMMU_SCTR_SE 0x00004000 /* snoop enable */ -#define CMMU_SCTR_PR 0x00002000 /* priority arbitration */ - -/* CMMU P bus fault status */ -#define CMMU_PFSR_SUCCESS 0 /* no fault */ -#define CMMU_PFSR_BERROR 3 /* bus error */ -#define CMMU_PFSR_SFAULT 4 /* segment fault */ -#define CMMU_PFSR_PFAULT 5 /* page fault */ -#define CMMU_PFSR_SUPER 6 /* supervisor violation */ -#define CMMU_PFSR_WRITE 7 /* writer violation */ - -/* Area Description */ -#define AREA_D_WT 0x00000200 /* write through */ -#define AREA_D_G 0x00000080 /* global */ -#define AREA_D_CI 0x00000040 /* cache inhibit */ -#define AREA_D_TE 0x00000001 /* translation enable */ - -/* Segment Description */ -#define SEG_D_WT 0x00000200 /* write through */ -#define SEG_D_SP 0x00000100 /* supervisor protection */ -#define SEG_D_G 0x00000080 /* global */ -#define SEG_D_CI 0x00000040 /* cache inhibit */ -#define SEG_D_WP 0x00000004 /* write protect */ -#define SEG_D_V 0x00000001 /* valid */ - -/* - * Flags for cmmu_flush_tlb - */ -#define FLUSH_KERNEL 1 -#define FLUSH_USER 0 -#define FLUSH_ALL ((vm_offset_t)~0) - - -#ifndef ASSEMBLER -/* - * This file defines the data structures for the mmu. - * One major data structure, the page descriptor, is not defined here - * but rather in pte.h as struct pte. - */ - -struct area_d { /* area descriptor */ - unsigned - ad_addr:20, /* segment table base address */ - : 2, - ad_wt : 1, /* write through */ - : 1, - ad_g : 1, /* global */ - ad_ci : 1, /* cache inhibit */ - : 5, - ad_te : 1; /* translation enable */ -}; - -struct segment_d { /* segment descriptor */ - unsigned - sd_addr:20, /* page table base address */ - : 2, - sd_wt : 1, /* write through */ - sd_sp : 1, /* supervisor protection */ - sd_g : 1, /* global */ - sd_ci : 1, /* cache inhibit */ - : 3, - sd_wp : 1, /* write protect */ - : 1, - sd_v : 1; /* valid */ -}; - -typedef struct segment_d segment_d_t; - -struct pfsr { /* P bus fault status register */ - unsigned - :13, - pfsr_fc: 3, /* falut code */ - :16; -}; - -struct batc { /* block address translation register */ - unsigned - batc_lba:13, /* logical block address */ - batc_pba:13, /* physical block address */ - batc_s : 1, /* supervisor */ - batc_wt : 4, /* write through */ - batc_g : 1, /* global */ - batc_ci : 1, /* cache inhibit */ - batc_wp : 1, /* write protect */ - batc_v : 1; /* valid */ -}; - -/* - * Prototypes and stuff for cmmu.c. - */ -extern unsigned cpu_sets[MAX_CPUS]; -extern unsigned ncpus; -extern unsigned cache_policy; - -#ifdef CMMU_DEBUG - void show_apr(unsigned value); - void show_sctr(unsigned value); -#endif - -/* - * Prototypes from "motorola/m88k/m88100/cmmu.c" - */ -unsigned cmmu_cpu_number(void); -#if !DDB -static -#endif /* !DDB */ -unsigned cmmu_remote_get(unsigned cpu, unsigned r, unsigned data); -unsigned cmmu_get_idr(unsigned data); -void cmmu_init(void); -void cmmu_shutdown_now(void); -void cmmu_parity_enable(void); -#if !DDB -static -#endif /* !DDB */ -void cmmu_remote_set(unsigned cpu, unsigned r, unsigned data, unsigned x); -void cmmu_set_sapr(unsigned ap); -void cmmu_remote_set_sapr(unsigned cpu, unsigned ap); -void cmmu_set_uapr(unsigned ap); -void cmmu_flush_tlb(unsigned kernel, vm_offset_t vaddr, int size); -void cmmu_flush_remote_cache(int cpu, vm_offset_t physaddr, int size); -void cmmu_flush_cache(vm_offset_t physaddr, int size); -void cmmu_flush_remote_inst_cache(int cpu, vm_offset_t physaddr, int size); -void cmmu_flush_inst_cache(vm_offset_t physaddr, int size); -void cmmu_flush_remote_data_cache(int cpu, vm_offset_t physaddr, int size); -void cmmu_flush_data_cache(vm_offset_t physaddr, int size); - -void cmmu_pmap_activate( - unsigned cpu, - unsigned uapr, - batc_template_t i_batc[BATC_MAX], - batc_template_t d_batc[BATC_MAX]); - -void cmmu_flush_remote_tlb( - unsigned cpu, - unsigned kernel, - vm_offset_t vaddr, - int size); - -void cmmu_set_batc_entry( - unsigned cpu, - unsigned entry_no, - unsigned data, /* 1 = data, 0 = instruction */ - unsigned value); /* the value to stuff into the batc */ - -void cmmu_set_pair_batc_entry( - unsigned cpu, - unsigned entry_no, - unsigned value); /* the value to stuff into the batc */ - -#endif /* ASSEMBLER */ - -#define INST_CMMU 0 -#define DATA_CMMU 1 - -#define NBSG (4*1024*1024) /* segment size */ - -#endif /* __MACHINE_M882XX_H__ */ diff --git a/sys/arch/mvme88k/include/mmu.h b/sys/arch/mvme88k/include/mmu.h deleted file mode 100644 index fda1117f667..00000000000 --- a/sys/arch/mvme88k/include/mmu.h +++ /dev/null @@ -1,306 +0,0 @@ -/* - * Ashura Project - */ -/* - * HISTORY - * - * Original SCCS ID in ISEDL - * @(#)mmu.h 1.22 90/09/20 19:13:34 - */ - -#ifndef _MACHINE_MMU_ -#define _MACHINE_MMU_ - -/* for m88k_pgbytes, m8kk_pgshift */ -#include <machine/vmparam.h> - - -/* - * Parameters which determine the 'geometry' of the M88K page tables in memory. - */ -#define SDT_BITS 10 /* M88K segment table size bits */ -#define PDT_BITS 10 /* M88K page table size bits */ -#define PG_BITS M88K_PGSHIFT /* M88K hardware page size bits */ - -/* - * Shifts and masks for M88K (hardware) page - */ -/* M88K_PGBYTES, PG_SHIFT in vm_param.h */ -#define M88K_PGOFSET (M88K_PGBYTES-1) /* offset into M88K page */ -#define M88K_PGMASK (~M88K_PGOFSET) /* page mask */ - -/* - * Convert byte address to page frame number - */ -#define M88K_BTOP(x) (((unsigned) (x)) >> M88K_PGSHIFT) -#define M88K_PTOB(x) (((unsigned) (x)) << M88K_PGSHIFT) - -/* - * Round off or truncate to the nearest page. These will work for - * either addresses of counts. (i.e. 1 byte round to 1 page bytes). - */ -#define M88K_TRUNC_PAGE(x) (((unsigned) (x) & M88K_PGMASK)) -#define M88K_ROUND_PAGE(x) M88K_TRUNC_PAGE((x) + M88K_PGOFSET) - -/* - * M88K area descriptors - */ -typedef struct cmmu_apr { - unsigned long - st_base:20, /* segment table base address */ - rsvA:2, /* reserved */ - wt:1, /* writethrough (cache control) */ - rsvB:1, /* reserved */ - g:1, /* global (cache control) */ - ci:1, /* cache inhibit */ - rsvC:5, /* reserved */ - te:1; /* transration enable */ -} cmmu_apr_t; - -typedef union apr_template { - cmmu_apr_t field; - unsigned long bits; -} apr_template_t; - -/* - * M88K segment descriptors - */ -typedef struct sdt_entry { - unsigned long - table_addr:20, /* page table base address */ - rsvA:2, /* reserved */ - wt:1, /* writethrough (cache control) */ - sup:1, /* supervisor protection */ - g:1, /* global (cache control) */ - no_cache:1, /* cache inhibit */ - rsvB:3, /* reserved */ - prot:1, /* write protect */ - rsvC:1, /* reserved */ - dtype:1; /* valid */ -} sdt_entry_t; - -typedef union sdt_entry_template { - sdt_entry_t sdt_desc; - unsigned long bits; -} sdt_entry_template_t; - -#define SDT_ENTRY_NULL ((sdt_entry_t *) 0) - -/* - * M88K page descriptors - */ -typedef struct pt_entry { - unsigned long - pfn:20, /* page frame address */ - rsvA:1, /* reserved */ - wired:1, /* wired bit <<software>> */ - wt:1, /* writethrough (cache control) */ - sup:1, /* supervisor protection */ - g:1, /* global (cache control) */ - ci:1, /* cache inhibit */ - rsvB:1, /* reserved */ - modified:1, /* modified */ - pg_used:1, /* used (referenced) */ - prot:1, /* write protect */ - rsvC:1, /* reserved */ - dtype:1; /* valid */ -} pt_entry_t; - -typedef union pte_template { - pt_entry_t pte; - unsigned long bits; -} pte_template_t; - -#define PT_ENTRY_NULL ((pt_entry_t *) 0) - -/* - * 88200 PATC (TLB) - */ - -#define PATC_ENTRIES 56 - -/* - * M88K BATC entries - */ -typedef struct { - unsigned long - lba:13, /* logical block address */ - pba:13, /* physical block address */ - sup:1, /* supervisor mode bit */ - wt:1, /* writethrough (cache control) */ - g:1, /* global (cache control) */ - ci:1, /* cache inhibit */ - wp:1, /* write protect */ - v:1; /* valid */ -} batc_entry_t; - -typedef union batc_template { - batc_entry_t field; - unsigned long bits; -} batc_template_t; - -/* - * Parameters and macros for BATC - */ -#define BATC_BLKBYTES (512*1024) /* 'block' size of a BATC entry mapping */ -#define BATC_BLKSHIFT 19 /* number of bits to BATC shift (log2(BATC_BLKBYTES)) */ -#define BATC_BLKMASK (BATC_BLKBYTES-1) /* BATC block mask */ - -#define BATC_MAX 8 /* number of BATC entries */ - -#define BATC_BLK_ALIGNED(x) ((x & BATC_BLKMASK) == 0) - -#define M88K_BTOBLK(x) (x >> BATC_BLKSHIFT) - -/* - * protection codes (prot field) - */ -#define M88K_RO 1 /* read only */ -#define M88K_RW 0 /* read/write */ - -/* - * protection codes (sup field) - */ -#define M88K_SUPV 1 /* translation can only be done in supervisor mode */ -#define M88K_USER 0 /* translation can be done supv. or user mode */ - -/* - * descriptor types - */ -#define DT_INVALID 0 -#define DT_VALID 1 - -/* - * Number of entries in a page table. - */ -#define SDT_ENTRIES (1<<(SDT_BITS)) -#define PDT_ENTRIES (1<<(PDT_BITS)) - -/* - * Size in bytes of a single page table. - */ -#define SDT_SIZE (sizeof(sdt_entry_t) * SDT_ENTRIES) -#define PDT_SIZE (sizeof(pt_entry_t) * PDT_ENTRIES) - -/* - * Shifts and masks - */ -#define SDT_SHIFT (PDT_BITS + PG_BITS) -#define PDT_SHIFT (PG_BITS) - -#define SDT_MASK (((1<<SDT_BITS)-1) << SDT_SHIFT) -#define PDT_MASK (((1<<PDT_BITS)-1) << PDT_SHIFT) - -#define SDT_NEXT(va) ((va + (1<<SDT_SHIFT)) & SDT_MASK) -#define PDT_NEXT(va) ((va + (1<<PDT_SHIFT)) & (SDT_MASK|PDT_MASK)) - -#define SDTIDX(va) ((va & SDT_MASK) >> SDT_SHIFT) -#define PDTIDX(va) ((va & PDT_MASK) >> PDT_SHIFT) - -#define SDTENT(map, va) ((sdt_entry_t *)(map->sdt_vaddr + SDTIDX(va))) - -/* - * Size of a PDT table group. - */ -#define LOG2_PDT_SIZE (PDT_BITS + 2) -#define LOG2_PDT_TABLE_GROUP_SIZE (PAGE_SHIFT - LOG2_PDT_SIZE) -#define PDT_TABLE_GROUP_SIZE (1 << LOG2_PDT_TABLE_GROUP_SIZE) -#define PT_FREE(tbl) kmem_free(kernel_map, tbl, PAGE_SIZE) - -/* - * Va spaces mapped by tables and PDT table group. - */ -#define PDT_VA_SPACE (PDT_ENTRIES * M88K_PGBYTES) -#define PDT_TABLE_GROUP_VA_SPACE (PDT_VA_SPACE * PDT_TABLE_GROUP_SIZE) - -/* - * Number of sdt entries used to map user and kernel space. - */ -#define USER_SDT_ENTRIES SDTIDX(VM_MIN_KERNEL_ADDRESS) -#define KERNEL_SDT_ENTRIES (SDT_ENTRIES - USER_SDT_ENTRIES) - -/* - * Macros to check if the descriptor is valid. - */ -#define SDT_VALID(sd_ptr) ((sd_ptr)->dtype == DT_VALID) -#define PDT_VALID(pd_ptr) ((pd_ptr)->dtype == DT_VALID) - -/* - * Alignment checks for pages (must lie on page boundaries). - */ -#define PAGE_ALIGNED(ad) (((vm_offset_t)(ad) & ~M88K_PGMASK) == 0) -#define CHECK_PAGE_ALIGN(ad,who) \ - if (!PAGE_ALIGNED(ad)) \ - printf("%s: addr %x not page aligned.\n", who, ad) - -/* - * Validate PTE's for all hardware pages in a VM page. - * "ptes_per_vm_page" should be set in pmap_bootstrap. - * - * PARAMETERS: - * pt_entry_t *start; - * unsigned long template; - */ -#define DO_PTES(start, template) \ -{ \ - int i_; \ - pt_entry_t *p_ = start; \ - \ - for (i_ = ptes_per_vm_page; i_>0; i_--) { \ - *(int *)p_++ = (unsigned long)(template); \ - template += M88K_PGBYTES; \ - /* (unsigned long)(template) for m88k C compiler\ - '90.7.24 Fuzzy */ \ - } \ -} - -/* - * Flags for cmmu_store() <cmmu.s> - */ -#define STORE_CMD 0 -#define STORE_UAPR 4 -#define STORE_SAPR 8 -#define STORE_BATCWP 0x400 - -#define C_CMMU 0 -#define D_CMMU 0x1000 - -/* - * Parameters for ATC(TLB) fulsh - */ - -#define CMMU_SCR 0x004 - -#define FLUSH_SUP_ALL 0x37 -#define FLUSH_USR_ALL 0x33 -#define FLUSH_SUP_SEG 0x36 -#define FLUSH_USR_SEG 0x32 -#define FLUSH_SUP_PG 0x35 -#define FLUSH_USR_PG 0x31 - -/* - * Cache coontrol bits for pte - */ -#define CACHE_DFL 0 -#define CACHE_INH 0x40 -#define CACHE_GLOBAL 0x80 -#define CACHE_WT 0x200 - -#define CACHE_MASK (~(unsigned)(CACHE_INH | CACHE_GLOBAL | CACHE_WT)) - -/* - * Prototype for invalidate_pte found in "motorola/m88k/m88100/misc.s" - */ -unsigned invalidate_pte(pt_entry_t *pointer); - -extern vm_offset_t kmapva; - -#define kvtopte(va) \ -({ \ - sdt_entry_t *sdt; \ - sdt = (sdt_entry_t *)kmapva + SDTIDX(va) + SDT_ENTRIES; \ - (pte_template_t *)(sdt->table_addr << PDT_SHIFT) + PDTIDX(va); \ -}) - -#endif -/* endif _MACHINE_MMU_ */ diff --git a/sys/arch/mvme88k/include/param.h b/sys/arch/mvme88k/include/param.h deleted file mode 100644 index c246503d7f8..00000000000 --- a/sys/arch/mvme88k/include/param.h +++ /dev/null @@ -1,224 +0,0 @@ -/* $OpenBSD: param.h,v 1.3 1997/02/28 22:57:38 niklas Exp $ */ - -/* - * Copyright (c) 1988 University of Utah. - * Copyright (c) 1982, 1986, 1990 The Regents of the University of California. - * All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * the Systems Programming Group of the University of Utah Computer - * Science Department. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * from: Utah $Hdr: machparam.h 1.11 89/08/14$ - */ -#ifndef _MACHINE_PARAM_H_ -#define _MACHINE_PARAM_H_ - -/* - * Machine dependent constants for mvme88k - */ -#define MACHINE "mvme88k" -#define _MACHINE mvme88k -#define MACHINE_ARCH "m88k" -#define _MACHINE_ARCH m88k -#define MID_MACHINE MID_M88K - -/* - * Round p (pointer or byte index) up to a correctly-aligned value - * for all data types (int, long, ...). The result is u_int and - * must be cast to any desired pointer type. - */ -#define ALIGNBYTES (sizeof(int) - 1) -#define ALIGN(p) (((u_int)(p) + (sizeof(int) - 1)) &~ (sizeof(int) - 1)) - -#ifndef NBPG -#define NBPG 4096 /* bytes/page */ -#endif /* NBPG */ -#define PGOFSET (NBPG-1) /* byte offset into page */ -#define PGSHIFT 12 /* LOG2(NBPG) */ -#define NPTEPG (NBPG/(sizeof(u_int))) - -#define NBSEG (1<<22) /* bytes/segment */ -#define SEGOFSET (NBSEG-1) /* byte offset into segment */ -#define SEGSHIFT 22 /* LOG2(NBSEG) */ - -/* - * 187 Bug uses the bottom 64k. We allocate ptes to map this into the - * kernel. But when we link the kernel, we tell it to start linking - * past this 64k. How does this change KERNBASE? XXX - */ - -#define KERNBASE 0x0 /* start of kernel virtual */ -#define BTOPKERNBASE ((u_long)KERNBASE >> PGSHIFT) - -#define DEV_BSIZE 512 -#define DEV_BSHIFT 9 /* log2(DEV_BSIZE) */ -#define BLKDEV_IOSIZE 2048 /* Should this be changed? XXX */ -#define MAXPHYS (64 * 1024) /* max raw I/O transfer size */ - -#define CLSIZE 1 -#define CLSIZELOG2 0 - -/* NOTE: SSIZE, SINCR and UPAGES must be multiples of CLSIZE */ -#define SSIZE 1 /* initial stack size/NBPG */ -#define SINCR 1 /* increment of stack/NBPG */ -#define USPACE ctob(UPAGES) - -#define UPAGES 3 /* pages of u-area */ -#define UADDR 0xFFEE0000 /* address of u */ -#define UVPN (UADDR>>PGSHIFT)/* virtual page number of u */ -#define KERNELSTACK (UADDR+UPAGES*NBPG) /* top of kernel stack */ - -/* - * Constants related to network buffer management. - * MCLBYTES must be no larger than CLBYTES (the software page size), and, - * on machines that exchange pages of input or output buffers with mbuf - * clusters (MAPPED_MBUFS), MCLBYTES must also be an integral multiple - * of the hardware page size. - */ -#define MSIZE 128 /* size of an mbuf */ -#define MCLSHIFT 11 -#define MCLBYTES (1 << MCLSHIFT) -#define MCLOFSET (MCLBYTES - 1) -#ifndef NMBCLUSTERS -#ifdef GATEWAY -#define NMBCLUSTERS 512 /* map size, max cluster allocation */ -#else -#define NMBCLUSTERS 256 /* map size, max cluster allocation */ -#endif -#endif - -/* - * Size of kernel malloc arena in CLBYTES-sized logical pages - */ -#ifndef NKMEMCLUSTERS -#define NKMEMCLUSTERS (3072*1024/CLBYTES) -#endif - -#define MAXPARTITIONS 16 - -/* pages ("clicks") to disk blocks */ -#define ctod(x) ((x)<<(PGSHIFT-DEV_BSHIFT)) -#define dtoc(x) ((x)>>(PGSHIFT-DEV_BSHIFT)) -#define dtob(x) ((x)<<DEV_BSHIFT) - -/* pages to bytes */ -#define ctob(x) ((x)<<PGSHIFT) - -/* bytes to pages */ -#define btoc(x) (((unsigned)(x)+(NBPG-1))>>PGSHIFT) - -#define btodb(bytes) /* calculates (bytes / DEV_BSIZE) */ \ - ((unsigned)(bytes) >> DEV_BSHIFT) -#define dbtob(db) /* calculates (db * DEV_BSIZE) */ \ - ((unsigned)(db) << DEV_BSHIFT) - -/* - * Map a ``block device block'' to a file system block. - * This should be device dependent, and should use the bsize - * field from the disk label. - * For now though just use DEV_BSIZE. - */ -#define bdbtofsb(bn) ((bn) / (BLKDEV_IOSIZE/DEV_BSIZE)) -#include <machine/psl.h> - -#ifdef JUNK -/* - * Mach derived conversion macros - */ -#define m88k_round_seg(x) ((((unsigned)(x)) + NBSEG - 1) & ~(NBSEG-1)) -#define m88k_trunc_seg(x) ((unsigned)(x) & ~(NBSEG-1)) -#define m88k_round_page(x) ((((unsigned)(x)) + NBPG - 1) & ~(NBPG-1)) -#define m88k_trunc_page(x) ((unsigned)(x) & ~(NBPG-1)) -#define m88k_btos(x) ((unsigned)(x) >> SEGSHIFT) -#define m88k_stob(x) ((unsigned)(x) << SEGSHIFT) -#define m88k_btop(x) ((unsigned)(x) >> PGSHIFT) -#define m88k_ptob(x) ((unsigned)(x) << PGSHIFT) - -/* - * spl functions; all but spl0 are done in-line - */ -#include <machine/psl.h> - -#define _debug_spl(s) \ -({ \ - register int _spl_r; \ -\ - asm __volatile ("clrl %0; movew sr,%0; movew %1,sr" : \ - "&=d" (_spl_r) : "di" (s)); \ - if ((_spl_r&PSL_IPL) > (s&PSL_IPL)) \ - printf ("%s:%d:spl(%d) ==> spl(%d)!!\n",__FILE__,__LINE__, \ - ((PSL_IPL&_spl_r)>>8), ((PSL_IPL&s)>>8)); \ - _spl_r; \ -}) - -#define _spl_no_check(s) \ -({ \ - register int _spl_r; \ -\ - asm __volatile ("clrl %0; movew sr,%0; movew %1,sr" : \ - "&=d" (_spl_r) : "di" (s)); \ - _spl_r; \ -}) -#if defined (DEBUG) -#define _spl _debug_spl -#else -#define _spl _spl_no_check -#endif - -/* spl0 requires checking for software interrupts */ -#define spl1() _spl(PSL_S|PSL_IPL1) -#define spl2() _spl(PSL_S|PSL_IPL2) -#define spl3() _spl(PSL_S|PSL_IPL3) -#define spl4() _spl(PSL_S|PSL_IPL4) -#define spl5() _spl(PSL_S|PSL_IPL5) -#define spl6() _spl(PSL_S|PSL_IPL6) -#define spl7() _spl(PSL_S|PSL_IPL7) - - -#define splnone() spl0() -#define splsoftclock() spl1() -#define splnet() spl1() -#define splbio() spl3() -#define splimp() spl3() -#define spltty() spl4() -#define splclock() spl6() -#define splstatclock() spl6() -#define splvm() spl6() -#define splhigh() spl7() -#define splsched() spl7() -#endif /* JUNK */ - -#ifdef _KERNEL -#define DELAY(x) delay(x) -#endif - -#endif /* !_MACHINE_PARAM_H_ */ diff --git a/sys/arch/mvme88k/include/pcb.h b/sys/arch/mvme88k/include/pcb.h deleted file mode 100644 index 96628d11b34..00000000000 --- a/sys/arch/mvme88k/include/pcb.h +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1992 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* - * Motorola 88100 pcb definitions - * - */ -/* - */ -#ifndef _PCB_H_ -#define _PCB_H_ - -/* - * Our PCB is the regular PCB+Save area for kernel frame. - * Upon entering kernel mode from user land, save the user context - * in the saved_state area - this is passed as the exception frame. - * On a context switch, only registers that need to be saved by the - * C calling convention and few other regs (pc, psr etc) are saved - * in the kernel_state part of the PCB. - */ - -/* This must always be an even number of words long */ - -struct m88100_pcb { - unsigned pcb_pc; /* address to return */ - unsigned pcb_r14; - unsigned pcb_r15; - unsigned pcb_r16; - unsigned pcb_r17; - unsigned pcb_r18; - unsigned pcb_r19; - unsigned pcb_r20; - unsigned pcb_r21; - unsigned pcb_r22; - unsigned pcb_r23; - unsigned pcb_r24; - unsigned pcb_r25; - unsigned pcb_r26; - unsigned pcb_r27; - unsigned pcb_r28; - unsigned pcb_r29; - unsigned pcb_r30; - unsigned pcb_sp; /* kernel stack pointer */ - unsigned pcb_mask; -}; - - -/* - * m88100_saved_state this structure corresponds to the state - * of the user registers as saved on the - * stack upon kernel entry. This structure - * is used internally only. Since this - * structure may change from version to - * version, it is hidden from the user. - */ - -/* This must always be an even number of words long */ - -struct m88100_saved_state { - unsigned r[32]; - unsigned fpsr; - unsigned fpcr; - unsigned epsr; - unsigned sxip; - unsigned snip; - unsigned sfip; - unsigned ssbr; - unsigned dmt0; - unsigned dmd0; - unsigned dma0; - unsigned dmt1; - unsigned dmd1; - unsigned dma1; - unsigned dmt2; - unsigned dmd2; - unsigned dma2; - unsigned fpecr; - unsigned fphs1; - unsigned fpls1; - unsigned fphs2; - unsigned fpls2; - unsigned fppt; - unsigned fprh; - unsigned fprl; - unsigned fpit; - unsigned vector; /* exception vector number */ - unsigned mask; /* interrupt mask level */ - unsigned mode; /* interrupt mode */ - unsigned scratch1; /* used by locore trap handling code */ - unsigned pad; /* to make an even length */ -} ; - -#define trapframe m88100_saved_state - -struct pcb -{ - struct m88100_saved_state user_state; - struct m88100_pcb kernel_state; - int pcb_onfault; /* for copyin/copyout faults */ -}; - -typedef struct pcb *pcb_t; /* exported */ - -/* - * Location of saved user registers for the proc. - */ -#define USER_REGS(p) \ - (((struct m88100_saved_state *) (&((p)->p_addr->u_pcb.user_state)))) -/* - * The pcb is augmented with machine-dependent additional data for - * core dumps. Note that the trapframe here is a copy of the one - * from the top of the kernel stack (included here so that the kernel - * stack itself need not be dumped). - */ -struct md_coredump { - struct trapframe md_tf; -}; - -#endif _PCB_H_ diff --git a/sys/arch/mvme88k/include/pcctworeg.h b/sys/arch/mvme88k/include/pcctworeg.h deleted file mode 100644 index eecc7d47479..00000000000 --- a/sys/arch/mvme88k/include/pcctworeg.h +++ /dev/null @@ -1,146 +0,0 @@ -/* $NetBSD$ */ - -/* - * Copyright (c) 1995 Theo de Raadt - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by Theo de Raadt - * 4. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/* - * MVME1x7/16x PCC2 chip: sort of a confused mish-mash of the MC in the 162 - * and the PCC in the 147 - */ -struct pcctworeg { - volatile u_char pcc2_chipid; - volatile u_char pcc2_chiprev; - volatile u_char pcc2_genctl; - volatile u_char pcc2_vecbase; /* irq vector base */ - volatile u_long pcc2_t1cmp; /* timer1 compare */ - volatile u_long pcc2_t1count; /* timer1 count */ - volatile u_long pcc2_t2cmp; /* timer2 compare */ - volatile u_long pcc2_t2count; /* timer2 count */ - volatile u_char pcc2_pscalecnt; /* timer prescaler counter */ - volatile u_char pcc2_pscaleadj; /* timer prescaler adjust */ - volatile u_char pcc2_t2ctl; /* timer2 ctrl reg */ - volatile u_char pcc2_t1ctl; /* timer1 ctrl reg */ - volatile u_char pcc2_gpioirq; /* gpio irq */ - volatile u_char pcc2_gpio; /* gpio i/o */ - volatile u_char pcc2_t2irq; - volatile u_char pcc2_t1irq; - volatile u_char pcc2_sccerr; - volatile u_char pcc2_sccirq; - volatile u_char pcc2_scctx; - volatile u_char pcc2_sccrx; - volatile u_char :8; - volatile u_char :8; - volatile u_char :8; - volatile u_char pcc2_sccmoiack; - volatile u_char :8; - volatile u_char pcc2_scctxiack; - volatile u_char :8; - volatile u_char pcc2_sccrxiack; - volatile u_char pcc2_ieerr; - volatile u_char :8; - volatile u_char pcc2_iectl; - volatile u_char pcc2_ieirq; - volatile u_char pcc2_ncrerr; - volatile u_char :8; - volatile u_char :8; - volatile u_char pcc2_ncrirq; - volatile u_char pcc2_prtairq; - volatile u_char pcc2_prtfirq; - volatile u_char pcc2_prtsirq; - volatile u_char pcc2_prtpirq; - volatile u_char pcc2_prtbirq; - volatile u_char :8; - volatile u_char pcc2_prtstat; - volatile u_char pcc2_prtctl; - volatile u_short pcc2_speed; /* DO NOT USE */ - volatile u_short pcc2_prtdat; - volatile u_short :16; - volatile u_char pcc2_ipl; - volatile u_char pcc2_mask; -}; -#define PCC2_PCC2CHIP_ADDR 0xFFF42000 -#define PCC2_PCC2CHIP_OFF 0x42000 -#define PCC2_CHIPID 0x20 - -/* - * points to system's PCCTWO. This is not active until the pcctwo0 - * device has been attached. After that, it gives the virtual address - * at which the PCCTWO can be accessed. - */ -extern struct pcctworeg *sys_pcc2; - -/* - * We lock off our interrupt vector at 0x50. - */ -#define PCC2_VECBASE 0x50 -#define PCC2_NVEC 12 - -/* - * Vectors we use - */ -#define PCC2V_NCR 0x05 -#define PCC2V_IE_ERR 0x06 -#define PCC2V_IE 0x07 -#define PCC2V_TIMER2 0x08 -#define PCC2V_TIMER1 0x09 -#define PCC2V_GPIO 0x0A - -#define PCC2_TCTL_CEN 0x01 -#define PCC2_TCTL_COC 0x02 -#define PCC2_TCTL_COVF 0x04 -#define PCC2_TCTL_OVF 0xf0 - -#define PCC2_GPIO_PLTY 0x80 -#define PCC2_GPIO_EL 0x40 - -#define PCC2_GPIOCR_OE 0x2 -#define PCC2_GPIOCR_O 0x1 - -#define PCC2_SCC_AVEC 0x08 -#define PCC2_SCCRX_INHIBIT (0 << 6) -#define PCC2_SCCRX_SNOOP (1 << 6) -#define PCC2_SCCRX_INVAL (2 << 6) -#define PCC2_SCCRX_RESV (3 << 6) - -#define pcc2_timer_us2lim(us) (us) /* timer increments in "us" */ - -#define PCC2_IRQ_IPL 0x07 -#define PCC2_IRQ_ICLR 0x08 -#define PCC2_IRQ_IEN 0x10 -#define PCC2_IRQ_INT 0x20 - -#define PCC2_GENCTL_FAST 0x01 -#define PCC2_GENCTL_IEN 0x02 -#define PCC2_GENCTL_C040 0x03 - -#define PCC2_SC_INHIBIT (0 << 6) -#define PCC2_SC_SNOOP (1 << 6) -#define PCC2_SC_INVAL (2 << 6) -#define PCC2_SC_RESV (3 << 6) diff --git a/sys/arch/mvme88k/include/pmap.h b/sys/arch/mvme88k/include/pmap.h deleted file mode 100644 index fc1380b3297..00000000000 --- a/sys/arch/mvme88k/include/pmap.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - * HISTORY - */ -#ifndef _MACHINE_PMAP_H_ -#define _MACHINE_PMAP_H_ -#define OMRON_PMAP - -/* use builtin memcpy in gcc 2.0 */ -#if (__GNUC__ > 1) -#define bcopy(a,b,c) memcpy(b,a,c) -#endif - -#include <machine/psl.h> /* get standard goodies */ -#include <vm/vm_param.h> -#include <vm/vm_prot.h> /* vm_prot_t */ -#include <machine/mmu.h> /* batc_template_t, BATC_MAX, etc.*/ -#include <machine/pcb.h> /* pcb_t, etc.*/ - -typedef struct sdt_entry *sdt_ptr_t; - -/* - * PMAP structure - */ -typedef struct pmap *pmap_t; - -struct pmap { - sdt_ptr_t sdt_paddr; /* physical pointer to sdt */ - sdt_ptr_t sdt_vaddr; /* virtual pointer to sdt */ - int ref_count; /* reference count */ - - struct pmap_statistics stats; /* pmap statistics */ - -#ifdef DEBUG - pmap_t next; - pmap_t prev; -#endif - - /* for OMRON_PMAP */ - batc_template_t i_batc[BATC_MAX]; /* instruction BATCs */ - batc_template_t d_batc[BATC_MAX]; /* data BATCs */ - /* end OMRON_PMAP */ - -}; - -#include <vm/vm.h> - -#define PMAP_NULL ((pmap_t) 0) - -extern pmap_t kernel_pmap; - -#define PMAP_ACTIVATE(pmap, th, my_cpu) _pmap_activate(pmap, th, my_cpu) -#define PMAP_DEACTIVATE(pmap, th, my_cpu) _pmap_deactivate(pmap, th, my_cpu) - -#define PMAP_CONTEXT(pmap, thread) - -#define pmap_resident_count(pmap) ((pmap)->stats.resident_count) - -/* Used in builtin/device_pager.c */ -#define pmap_phys_address(frame) ((vm_offset_t) (M88K_PTOB(frame))) - -/* Used in kern/mach_timedev.c */ -#define pmap_phys_to_frame(phys) ((int) (M88K_BTOP(phys))) - -/* - * Since Our PCB has no infomation about the mapping, - * we have nothing to do in PMAP_PCB_INITIALIZE. - * XXX - */ -/* Used in machine/pcb.c */ -#define PMAP_PCB_INITIALIZE(x) - -/* - * Modes used when calling pmap_cache_fulsh(). - */ -#define FLUSH_CACHE 0 -#define FLUSH_CODE_CACHE 1 -#define FLUSH_DATA_CACHE 2 -#define FLUSH_LOCAL_CACHE 3 -#define FLUSH_LOCAL_CODE_CACHE 4 -#define FLUSH_LOCAL_DATA_CACHE 5 - -/**************************************************************************/ -/*** Prototypes for public functions defined in pmap.c ********************/ -/**************************************************************************/ - -void _pmap_activate(pmap_t pmap, pcb_t, int my_cpu); -void _pmap_deactivate(pmap_t pmap, pcb_t, int my_cpu); -void pmap_activate(pmap_t my_pmap, pcb_t); -void pmap_deactivate(pmap_t pmap, pcb_t); -void pmap_protect(pmap_t pmap, vm_offset_t s, vm_offset_t e, vm_prot_t prot); -int pmap_check_transaction(pmap_t pmap, vm_offset_t va, vm_prot_t type); -void pmap_page_protect(vm_offset_t phys, vm_prot_t prot); - -vm_offset_t pmap_map( - vm_offset_t virt, - vm_offset_t start, - vm_offset_t end, - vm_prot_t prot - #ifdef OMRON_PMAP - , unsigned cmode - #endif - ); - -vm_offset_t pmap_map_batc( - vm_offset_t virt, - vm_offset_t start, - vm_offset_t end, - vm_prot_t prot, - unsigned cmode); - -void pmap_enter( - pmap_t pmap, - vm_offset_t va, - vm_offset_t pa, - vm_prot_t prot, - boolean_t wired); - - -#ifdef JUNK -int pmap_attribute( - pmap_t pmap, - vm_offset_t address, - vm_size_t size, - vm_machine_attribute_t attribute, - vm_machine_attribute_val_t* value); /* IN/OUT */ -#endif /* JUNK */ - -void pmap_bootstrap( - vm_offset_t load_start, /* IN */ - vm_offset_t *phys_start, /* IN/OUT */ - vm_offset_t *phys_end, /* IN */ - vm_offset_t *virt_start, /* OUT */ - vm_offset_t *virt_end); /* OUT */ - -#ifdef MACH_KERNEL - void pmap_init(); -#else - void pmap_init(vm_offset_t phys_start, vm_offset_t phys_end); -#endif - -void pmap_copy( - pmap_t dst_pmap, - pmap_t src_pmap, - vm_offset_t dst_addr, - vm_size_t len, - vm_offset_t src_addr); - -void pmap_pageable( - pmap_t pmap, - vm_offset_t start, - vm_offset_t end, - boolean_t pageable); - -pt_entry_t *pmap_pte(pmap_t map, vm_offset_t virt); -void pmap_cache_ctrl(pmap_t pmap, vm_offset_t s, vm_offset_t e, unsigned mode); -void pmap_zero_page(vm_offset_t phys); -pmap_t pmap_create(vm_size_t size); -void pmap_pinit(pmap_t p); -void pmap_release(pmap_t p); -void pmap_destroy(pmap_t p); -void pmap_reference(pmap_t p); -void pmap_remove(pmap_t map, vm_offset_t s, vm_offset_t e); -void pmap_remove_all(vm_offset_t phys); -void pmap_change_wiring(pmap_t map, vm_offset_t v, boolean_t wired); -vm_offset_t pmap_extract(pmap_t pmap, vm_offset_t va); -vm_offset_t pmap_extract_unlocked(pmap_t pmap, vm_offset_t va); -void pmap_update(void); -void pmap_collect(pmap_t pmap); -pmap_t pmap_kernel(void); -void pmap_copy_page(vm_offset_t src, vm_offset_t dst); -void copy_to_phys(vm_offset_t srcva, vm_offset_t dstpa, int bytecount); -void copy_from_phys(vm_offset_t srcpa, vm_offset_t dstva, int bytecount); -void pmap_redzone(pmap_t pmap, vm_offset_t va); -void pmap_clear_modify(vm_offset_t phys); -boolean_t pmap_is_modified(vm_offset_t phys); -void pmap_clear_reference(vm_offset_t phys); -boolean_t pmap_is_referenced(vm_offset_t phys); -boolean_t pmap_verify_free(vm_offset_t phys); -boolean_t pmap_valid_page(vm_offset_t p); -void icache_flush(vm_offset_t pa); -void pmap_dcache_flush(pmap_t pmap, vm_offset_t va); -void pmap_cache_flush(pmap_t pmap, vm_offset_t virt, int bytes, int mode); -void pmap_print (pmap_t pmap); -void pmap_print_trace (pmap_t pmap, vm_offset_t va, boolean_t long_format); -void pmap_virtual_space(vm_offset_t *startp, vm_offset_t *endp); -unsigned pmap_free_pages(void); -boolean_t pmap_next_page(vm_offset_t *addrp); - -#if 0 -#ifdef OMRON_PMAP - void pmap_set_batc( - pmap_t pmap, - boolean_t data, - int i, - vm_offset_t va, - vm_offset_t pa, - boolean_t super, - boolean_t wt, - boolean_t global, - boolean_t ci, - boolean_t wp, - boolean_t valid); - - void use_batc( - task_t task, - boolean_t data, /* for data-cmmu ? */ - int i, /* batc number */ - vm_offset_t va, /* virtual address */ - vm_offset_t pa, /* physical address */ - boolean_t s, /* for super-mode ? */ - boolean_t wt, /* is writethrough */ - boolean_t g, /* is global ? */ - boolean_t ci, /* is cache inhibited ? */ - boolean_t wp, /* is write-protected ? */ - boolean_t v); /* is valid ? */ -#endif -#endif /* 0 */ - -#endif /* endif _MACHINE_PMAP_H_ */ diff --git a/sys/arch/mvme88k/include/pmap_table.h b/sys/arch/mvme88k/include/pmap_table.h deleted file mode 100644 index 555789144ac..00000000000 --- a/sys/arch/mvme88k/include/pmap_table.h +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1992 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ - -/* - * HISTORY - */ - - -/* an entry is considered invalid if pm_size = 0 */ -/* end of list is indicated by pm_size 0xffffffff */ - -typedef struct { - vm_offset_t phys_start; /* in bytes */ - vm_offset_t virt_start; /* in bytes */ - unsigned int size; /* in bytes */ - unsigned int prot; /* vm_prot_read, vm_prot_write */ - unsigned int cacheability; /* none, writeback, normal */ -} pmap_table_entry; - -typedef pmap_table_entry *pmap_table_t; - diff --git a/sys/arch/mvme88k/include/proc.h b/sys/arch/mvme88k/include/proc.h deleted file mode 100644 index 95209084379..00000000000 --- a/sys/arch/mvme88k/include/proc.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (c) 1992, 1993 - * The Regents of the University of California. All rights reserved. - * - * This software was developed by the Computer Systems Engineering group - * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and - * contributed to Berkeley. - * - * All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Lawrence Berkeley Laboratory. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)proc.h 8.1 (Berkeley) 6/11/93 - * - * from: Header: proc.h,v 1.6 92/11/26 02:04:41 torek Exp (LBL) - * $Id: proc.h,v 1.1 1995/10/18 10:54:21 deraadt Exp $ - */ - -#include <machine/pcb.h> -#include <machine/mmu.h> - -/* - * Machine-dependent part of the proc structure for VME1X7. - */ -struct mdproc { - struct trapframe *md_tf; /* trap/syscall registers */ - struct fpstate *md_fpstate; /* fpu state, if any; always resident */ - int md_upte[UPAGES]; /* ptes for mapping u page */ -}; diff --git a/sys/arch/mvme88k/include/profile.h b/sys/arch/mvme88k/include/profile.h deleted file mode 100644 index 095919c1ed7..00000000000 --- a/sys/arch/mvme88k/include/profile.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * Copyright (c) 1992, 1993 - * The Regents of the University of California. All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * from: @(#)profile.h 8.1 (Berkeley) 6/11/93 - * $Id: profile.h,v 1.3 1997/01/27 20:34:17 deraadt Exp $ - */ - -#define _MCOUNT_DECL static inline void _mcount - -#define MCOUNT \ -extern void mcount __P((void)) __asm("mcount"); \ -void \ -mcount() \ -{ \ - register int selfret, callerret; \ - /* \ - * find the return address for mcount, \ - * and the return address for mcount's caller. \ - * \ - * selfret = ret pushed by mcount call \ - */ \ - __asm volatile("ld %0,r31,36" : "=r" (selfret)); \ - /* \ - * callerret = ret pushed by call into self. \ - */ \ - /* \ - * This may not be right. It all depends on where the \ - * caller stores the return address. XXX \ - */ \ - __asm volatile("addu r10,r31,48"); \ - __asm volatile("ld %0,r10,36" : "=r" (callerret)); \ - _mcount(callerret, selfret); \ -} - -#ifdef KERNEL -/* - * Note that we assume splhigh() and splx() cannot call mcount() - * recursively. - */ -#define MCOUNT_ENTER s = splhigh() -#define MCOUNT_EXIT splx(s) -#endif /* KERNEL */ diff --git a/sys/arch/mvme88k/include/psl.h b/sys/arch/mvme88k/include/psl.h deleted file mode 100644 index f7f35dcd1c6..00000000000 --- a/sys/arch/mvme88k/include/psl.h +++ /dev/null @@ -1,97 +0,0 @@ -#ifndef __M88K_M88100_PSL_H__ -#define __M88K_M88100_PSL_H__ - -/* needs major cleanup - XXX nivas */ - -#define spl0() spln(0) -#define spl1() spln(1) -#define spl2() spln(2) -#define spl3() spln(3) -#define spl4() spln(4) -#define spl5() spln(5) -#define spl6() spln(6) -#define spl7() spln(7) - -#define splnone() spln(0) -#define splsoftclock() spln(1) -#define splnet() spln(1) -#define splbio() spln(3) -#define splimp() spln(3) -#define spltty() spln(4) -#define splclock() spln(6) -#define splstatclock() spln(6) -#define splvm() spln(6) -#define splhigh() spln(7) -#define splsched() spln(7) - -#define splx(x) spln(x) - -/* - * 88100 control registers - */ - -/* - * processor identification register (PID) - */ -#define PID_ARN 0x0000FF00U /* architectural revision number */ -#define PID_VN 0x000000FEU /* version number */ -#define PID_MC 0x00000001U /* master/checker */ - -/* - * processor status register - */ -#define PSR_MODE 0x80000000U /* supervisor/user mode */ -#define PSR_BO 0x40000000U /* byte-ordering 0:big 1:little */ -#define PSR_SER 0x20000000U /* serial mode */ -#define PSR_C 0x10000000U /* carry */ -#define PSR_SFD 0x000003F0U /* SFU disable */ -#define PSR_SFD1 0x00000008U /* SFU1 (FPU) disable */ -#define PSR_MXM 0x00000004U /* misaligned access enable */ -#define PSR_IND 0x00000002U /* interrupt disable */ -#define PSR_SFRZ 0x00000001U /* shadow freeze */ - -/* - * This is used in ext_int() and hard_clock(). - */ -#define PSR_IPL 0x00001000 /* for basepri */ -#define PSR_IPL_LOG 12 /* = log2(PSR_IPL) */ - -#define PSR_MODE_LOG 31 /* = log2(PSR_MODE) */ -#define PSR_BO_LOG 30 /* = log2(PSR_BO) */ -#define PSR_SER_LOG 29 /* = log2(PSR_SER) */ -#define PSR_SFD1_LOG 3 /* = log2(PSR_SFD1) */ -#define PSR_MXM_LOG 2 /* = log2(PSR_MXM) */ -#define PSR_IND_LOG 1 /* = log2(PSR_IND) */ -#define PSR_SFRZ_LOG 0 /* = log2(PSR_SFRZ) */ - -#define PSR_SUPERVISOR (PSR_MODE | PSR_SFD) -#define PSR_USER (PSR_SFD) -#define PSR_SET_BY_USER (PSR_BO | PSR_SER | PSR_C | PSR_MXM) - -#ifndef ASSEMBLER -struct psr { - unsigned - psr_mode: 1, - psr_bo : 1, - psr_ser : 1, - psr_c : 1, - :18, - psr_sfd : 6, - psr_sfd1: 1, - psr_mxm : 1, - psr_ind : 1, - psr_sfrz: 1; -}; -#endif - -#define FIP_V 0x00000002U /* valid */ -#define FIP_E 0x00000001U /* exception */ -#define FIP_ADDR 0xFFFFFFFCU /* address mask */ -#define NIP_V 0x00000002U /* valid */ -#define NIP_E 0x00000001U /* exception */ -#define NIP_ADDR 0xFFFFFFFCU /* address mask */ -#define XIP_V 0x00000002U /* valid */ -#define XIP_E 0x00000001U /* exception */ -#define XIP_ADDR 0xFFFFFFFCU /* address mask */ - -#endif /* __M88K_M88100_PSL_H__ */ diff --git a/sys/arch/mvme88k/include/ptrace.h b/sys/arch/mvme88k/include/ptrace.h deleted file mode 100644 index 2aecaab88eb..00000000000 --- a/sys/arch/mvme88k/include/ptrace.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright (c) 1992, 1993 - * The Regents of the University of California. All rights reserved. - * - * This software was developed by the Computer Systems Engineering group - * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and - * contributed to Berkeley. - * - * All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Lawrence Berkeley Laboratory. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)ptrace.h 8.1 (Berkeley) 6/11/93 - * - * from: Header: ptrace.h,v 1.6 92/11/26 02:04:43 torek Exp (LBL) - * $Id: ptrace.h,v 1.1 1995/10/18 10:54:23 deraadt Exp $ - */ - -/* - * m88k-dependent ptrace definitions. - */ -#define PT_GETREGS (PT_FIRSTMACH + 0) -#define PT_SETREGS (PT_FIRSTMACH + 1) -#define PT_GETFPREGS (PT_FIRSTMACH + 2) -#define PT_SETFPREGS (PT_FIRSTMACH + 3) diff --git a/sys/arch/mvme88k/include/reg.h b/sys/arch/mvme88k/include/reg.h deleted file mode 100644 index 6e7fc265cca..00000000000 --- a/sys/arch/mvme88k/include/reg.h +++ /dev/null @@ -1,47 +0,0 @@ -#include <machine/pcb.h> - -struct reg { - unsigned r_r[32]; - unsigned r_fpsr; - unsigned r_fpcr; - unsigned r_epsr; - unsigned r_sxip; - unsigned r_snip; - unsigned r_sfip; - unsigned r_ssbr; - unsigned r_dmt0; - unsigned r_dmd0; - unsigned r_dma0; - unsigned r_dmt1; - unsigned r_dmd1; - unsigned r_dma1; - unsigned r_dmt2; - unsigned r_dmd2; - unsigned r_dma2; - unsigned r_fpecr; - unsigned r_fphs1; - unsigned r_fpls1; - unsigned r_fphs2; - unsigned r_fpls2; - unsigned r_fppt; - unsigned r_fprh; - unsigned r_fprl; - unsigned r_fpit; - unsigned r_vector; /* exception vector number */ - unsigned r_mask; /* interrupt mask level */ - unsigned r_mode; /* interrupt mode */ - unsigned r_scratch1; /* used by locore trap handling code */ - unsigned r_pad; /* to make an even length */ -} ; - -struct fpreg { - unsigned fp_fpecr; - unsigned fp_fphs1; - unsigned fp_fpls1; - unsigned fp_fphs2; - unsigned fp_fpls2; - unsigned fp_fppt; - unsigned fp_fprh; - unsigned fp_fprl; - unsigned fp_fpit; -}; diff --git a/sys/arch/mvme88k/include/setjmp.h b/sys/arch/mvme88k/include/setjmp.h deleted file mode 100644 index aee3a668b34..00000000000 --- a/sys/arch/mvme88k/include/setjmp.h +++ /dev/null @@ -1,7 +0,0 @@ -/* $NetBSD: setjmp.h,v 1.1 1994/12/20 10:37:10 cgd Exp $ */ - -/* - * machine/setjmp.h: machine dependent setjmp-related information. - */ - -#define _JBLEN 19 /* size, in longs, of a jmp_buf */ diff --git a/sys/arch/mvme88k/include/signal.h b/sys/arch/mvme88k/include/signal.h deleted file mode 100644 index fb5c3e1c960..00000000000 --- a/sys/arch/mvme88k/include/signal.h +++ /dev/null @@ -1,45 +0,0 @@ -/* Stolen from SVR4 (/usr/include/sys/signal.h) */ - -typedef int sig_atomic_t; - -/* - * Information pushed on stack when a signal is delivered. - * This is used by the kernel to restore state following - * execution of the signal handler. It is also made available - * to the handler to allow it to restore state properly if - * a non-standard exit is performed. - * - * All machines must have an sc_onstack and sc_mask. - */ -struct sigcontext { - int sc_onstack; /* sigstack state to restore */ - int sc_mask; /* signal mask to restore */ - /* begin machine dependent portion */ - int sc_regs[32]; -#define sc_sp sc_regs[31] - int sc_xip; - int sc_nip; - int sc_fip; - int sc_ps; - int sc_fpsr; - int sc_fpcr; - int sc_ssbr; - int sc_dmt0; - int sc_dmd0; - int sc_dma0; - int sc_dmt1; - int sc_dmd1; - int sc_dma1; - int sc_dmt2; - int sc_dmd2; - int sc_dma2; - int sc_fpecr; - int sc_fphs1; - int sc_fpls1; - int sc_fphs2; - int sc_fpls2; - int sc_fppt; - int sc_fprh; - int sc_fprl; - int sc_fpit; -}; diff --git a/sys/arch/mvme88k/include/stdarg.h b/sys/arch/mvme88k/include/stdarg.h deleted file mode 100644 index 9820ff6fb8c..00000000000 --- a/sys/arch/mvme88k/include/stdarg.h +++ /dev/null @@ -1,176 +0,0 @@ -/* This file has local changes by MOTOROLA -Thu Sep 9 09:06:29 CDT 1993 Dale Rahn (drahn@pacific) - * (gstdarg.h, gvarargs.h) C-Front requires all builtins to - be defined. This is to insert these definitions if - __cplusplus is defined but not using the G++ compiler. - */ -/* stdarg.h for GNU. - Note that the type used in va_arg is supposed to match the - actual type **after default promotions**. - Thus, va_arg (..., short) is not valid. */ - -#ifndef _STDARG_H -#ifndef _ANSI_STDARG_H_ -#ifndef __need___va_list -#define _STDARG_H -#define _ANSI_STDARG_H_ -#endif /* not __need___va_list */ -#undef __need___va_list - -#ifndef __GNUC__ -/* Use the system's macros with the system's compiler. - This is relevant only when building GCC with some other compiler. */ -#include <stdarg.h> -#else -#ifdef __clipper__ -#include <va-clipper.h> -#else -#ifdef __m88k__ -#include <va-m88k.h> -#else -#ifdef __i860__ -#include <va-i860.h> -#else -#ifdef __hppa__ -#include <va-pa.h> -#else -#ifdef __mips__ -#include <va-mips.h> -#else -#ifdef __sparc__ -#include <va-sparc.h> -#else -#ifdef __i960__ -#include <va-i960.h> -#else -#ifdef __alpha__ -#include <va-alpha.h> -#else - -/* Define __gnuc_va_list. */ - -#ifndef __GNUC_VA_LIST -#define __GNUC_VA_LIST -#if defined(__svr4__) || defined(_AIX) || defined(_M_UNIX) -typedef char *__gnuc_va_list; -#else -typedef void *__gnuc_va_list; -#endif -#endif - -/* Define the standard macros for the user, - if this invocation was from the user program. */ -#ifdef _STDARG_H - -/* Amount of space required in an argument list for an arg of type TYPE. - TYPE may alternatively be an expression whose type is used. */ - -#define __va_rounded_size(TYPE) \ - (((sizeof (TYPE) + sizeof (int) - 1) / sizeof (int)) * sizeof (int)) - -#define va_start(AP, LASTARG) \ - (AP = ((__gnuc_va_list) __builtin_next_arg ())) - -#undef va_end -void va_end (__gnuc_va_list); /* Defined in libgcc.a */ -#define va_end(AP) - -/* We cast to void * and then to TYPE * because this avoids - a warning about increasing the alignment requirement. */ - -#if defined (__arm__) || defined (__i386__) || defined (__ns32000__) || defined (__vax__) -/* This is for little-endian machines; small args are padded upward. */ -#define va_arg(AP, TYPE) \ - (AP = (__gnuc_va_list) ((char *) (AP) + __va_rounded_size (TYPE)), \ - *((TYPE *) (void *) ((char *) (AP) - __va_rounded_size (TYPE)))) -#else /* big-endian */ -/* This is for big-endian machines; small args are padded downward. */ -#define va_arg(AP, TYPE) \ - (AP = (__gnuc_va_list) ((char *) (AP) + __va_rounded_size (TYPE)), \ - *((TYPE *) (void *) ((char *) (AP) - ((sizeof (TYPE) < 4 \ - ? sizeof (TYPE) \ - : __va_rounded_size (TYPE)))))) -#endif /* big-endian */ -#endif /* _STDARG_H */ - -#endif /* not alpha */ -#endif /* not i960 */ -#endif /* not sparc */ -#endif /* not mips */ -#endif /* not hppa */ -#endif /* not i860 */ -#endif /* not m88k */ -#endif /* not clipper */ - -#ifdef _STDARG_H -/* Define va_list, if desired, from __gnuc_va_list. */ -/* We deliberately do not define va_list when called from - stdio.h, because ANSI C says that stdio.h is not supposed to define - va_list. stdio.h needs to have access to that data type, - but must not use that name. It should use the name __gnuc_va_list, - which is safe because it is reserved for the implementation. */ - -#ifdef _HIDDEN_VA_LIST /* On OSF1, this means varargs.h is "half-loaded". */ -#undef _VA_LIST -#endif - -#ifdef _BSD_VA_LIST -#undef _BSD_VA_LIST -#endif - -#ifdef __svr4__ -/* SVR4.2 uses _VA_LIST for an internal alias for va_list, - so we must avoid testing it and setting it here. - SVR4 uses _VA_LIST as a flag in stdarg.h, but we should - have no conflict with that. */ -#ifndef _VA_LIST_ -#define _VA_LIST_ -#ifdef __i860__ -#ifndef _VA_LIST -#define _VA_LIST va_list -#endif -#endif /* __i860__ */ -typedef __gnuc_va_list va_list; -#endif /* _VA_LIST_ */ -#else /* not __svr4__ */ - -/* The macro _VA_LIST_ is the same thing used by this file in Ultrix. - But on BSD NET2 we must not test or define or undef it. - (Note that the comments in NET 2's ansi.h - are incorrect for _VA_LIST_--see stdio.h!) */ -#if !defined (_VA_LIST_) || defined (__BSD_NET2__) || defined (____386BSD____) -/* The macro _VA_LIST is used in SCO Unix 3.2. */ -#ifndef _VA_LIST -/* The macro _VA_LIST_T_H is used in the Bull dpx2 */ -#ifndef _VA_LIST_T_H -#define _VA_LIST_T_H -#if !(defined (__BSD_NET2__) || defined (____386BSD____)) -#define _VA_LIST_ -#endif -#define _VA_LIST -typedef __gnuc_va_list va_list; -#endif /* not _VA_LIST_T_H */ -#endif /* not _VA_LIST */ -#endif /* not _VA_LIST_ */ - -#endif /* not __svr4__ */ - -#if defined(__cplusplus) && !defined(__GNUG__) - -/* This is added to work with AT&T C++. */ -extern "C" { - char *__builtin_next_arg(void); - __gnuc_va_list *__builtin_saveregs(void); - void *__builtin_saveregs2(int); - int *__builtin_argptr(void); - int __builtin_argsize(void); - int __builtin_classify_type(...); - int __alignof__(...); -} -#endif - -#endif /* _STDARG_H */ - -#endif /* __GNUC__ */ -#endif /* not _ANSI_STDARG_H_ */ -#endif /* not _STDARG_H */ diff --git a/sys/arch/mvme88k/include/trap.h b/sys/arch/mvme88k/include/trap.h deleted file mode 100644 index 4f8f3d4aa3f..00000000000 --- a/sys/arch/mvme88k/include/trap.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1992 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* - * HISTORY - * $Log: trap.h,v $ - * Revision 1.1 1995/10/18 10:54:21 deraadt - * Initial revision - * - * Revision 2.3 92/08/03 17:52:42 jfriedl - * watchpoint support - * [92/07/31 jfriedl] - * - * Revision 2.2 92/02/18 18:03:58 elf - * Liberated. - * [92/01/30 danner] - * - */ -/* - * Trap codes - */ - -#ifndef _M88K_TRAP_H -#define _M88K_TRAP_H 1 - -/* - * Trap type values - */ - -#define T_RESADFLT 0 /* reserved addressing fault */ -#define T_PRIVINFLT 1 /* privileged instruction fault */ -#define T_RESOPFLT 2 /* reserved operand fault */ - -/* End of known constants */ - -#define T_INSTFLT 3 /* instruction access exception */ -#define T_DATAFLT 4 /* data access exception */ -#define T_MISALGNFLT 5 /* misaligned access exception */ -#define T_ILLFLT 6 /* unimplemented opcode exception */ -#define T_BNDFLT 7 /* bounds check violation exception */ -#define T_ZERODIV 8 /* illegal divide exception */ -#define T_OVFFLT 9 /* integer overflow exception */ -#define T_ERRORFLT 10 /* error exception */ -#define T_FPEPFLT 11 /* floating point precise exception */ -#define T_FPEIFLT 12 /* floating point imprecise exception */ -#define T_ASTFLT 13 /* software trap */ -#if DDB -#define T_KDB_ENTRY 14 /* force entry to kernel debugger */ -#define T_KDB_BREAK 15 /* break point hit */ -#define T_KDB_TRACE 16 /* trace */ -#endif /* DDB */ -#define T_UNKNOWNFLT 17 /* unknown exception */ -#define T_SIGTRAP 18 /* generate SIGTRAP */ -#define T_SIGSYS 19 /* generate SIGSYS */ -#define T_STEPBPT 20 /* special breakpoint for single step */ -#define T_USERBPT 21 /* user set breakpoint (for debugger) */ -#define T_SYSCALL 22 /* Syscall */ -#define T_USER 23 /* user mode fault */ -#if DDB -#define T_KDB_WATCH 24 /* watchpoint hit */ -#endif /* DDB */ - -#endif _M88K_TRAP_H - diff --git a/sys/arch/mvme88k/include/types.h b/sys/arch/mvme88k/include/types.h deleted file mode 100644 index 7bcdde45938..00000000000 --- a/sys/arch/mvme88k/include/types.h +++ /dev/null @@ -1,85 +0,0 @@ -/* $NetBSD: types.h,v 1.7 1995/07/05 17:46:11 pk Exp $ */ - -/* - * Copyright (c) 1992, 1993 - * The Regents of the University of California. All rights reserved. - * - * This software was developed by the Computer Systems Engineering group - * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and - * contributed to Berkeley. - * - * All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Lawrence Berkeley Laboratory. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)types.h 8.1 (Berkeley) 6/11/93 - */ - -#ifndef _MACHTYPES_H_ -#define _MACHTYPES_H_ - -#include <sys/cdefs.h> - -#if !defined(_ANSI_SOURCE) && !defined(_POSIX_SOURCE) -typedef struct _physadr { - short r[1]; -} *physadr; - -typedef struct label_t { - int val[2]; -} label_t; -#endif - -typedef unsigned long vm_offset_t; -typedef unsigned long vm_size_t; - -/* - * Basic integral types. Omit the typedef if - * not possible for a machine/compiler combination. - */ -#define __BIT_TYPES_DEFINED__ -typedef __signed char int8_t; -typedef unsigned char u_int8_t; -typedef short int16_t; -typedef unsigned short u_int16_t; -typedef int int32_t; -typedef unsigned int u_int32_t; -/* LONGLONG */ -typedef long long int64_t; -/* LONGLONG */ -typedef unsigned long long u_int64_t; - -typedef int32_t register_t; - -#define __BDEVSW_DUMP_OLD_TYPE - -#endif /* _MACHTYPES_H_ */ diff --git a/sys/arch/mvme88k/include/va-m88k.h b/sys/arch/mvme88k/include/va-m88k.h deleted file mode 100644 index caa77c3c12d..00000000000 --- a/sys/arch/mvme88k/include/va-m88k.h +++ /dev/null @@ -1,85 +0,0 @@ -/* This file has local changes by MOTOROLA -Thu Sep 9 09:06:29 CDT 1993 Dale Rahn (drahn@pacific) - * Due to C-Front's usage of __alignof__ builtin the - usage of it must be changed to have an object of that type - as the argument not just the type. - */ -/* GNU C varargs support for the Motorola 88100 */ - -/* Define __gnuc_va_list. */ - -#ifndef __GNUC_VA_LIST -#define __GNUC_VA_LIST - -typedef struct -{ - int __va_arg; /* argument number */ - int *__va_stk; /* start of args passed on stack */ - int *__va_reg; /* start of args passed in regs */ -} __gnuc_va_list; -#endif /* not __GNUC_VA_LIST */ - -/* If this is for internal libc use, don't define anything but - __gnuc_va_list. */ -#if defined (_STDARG_H) || defined (_VARARGS_H) - -#ifdef _STDARG_H /* stdarg.h support */ - -#if __GNUC__ > 1 /* GCC 2.0 and beyond */ -#define va_start(AP,LASTARG) ((AP) = *(__gnuc_va_list *)__builtin_saveregs()) -#else -#define va_start(AP,LASTARG) \ - ( (AP).__va_reg = (int *) __builtin_saveregs2(0), \ - (AP).__va_stk = (int *) __builtin_argptr(), \ - (AP).__va_arg = (int) (__builtin_argsize() + 3) / 4 ) -#endif - -#else /* varargs.h support */ - -#if __GNUC__ > 1 /* GCC 2.0 and beyond */ -#define va_start(AP) ((AP) = *(__gnuc_va_list *)__builtin_saveregs()) -#else -#define va_start(AP) \ - ( (AP).__va_reg = (int *) __builtin_saveregs2(1), \ - (AP).__va_stk = (int *) __builtin_argptr(), \ - (AP).__va_arg = (int) (__builtin_argsize() - 4 + 3) / 4 ) -#endif -#define va_alist __va_1st_arg -#define va_dcl register int va_alist; - -#endif /* _STDARG_H */ - -/* Avoid trouble between this file and _int_varargs.h under DG/UX. This file - can be included by <stdio.h> and others and provides definitions of - __va_size and __va_reg_p and a va_list typedef. Avoid defining va_list - again with _VA_LIST. */ -#ifdef __INT_VARARGS_H -#undef __va_size -#undef __va_reg_p -#define __gnuc_va_list va_list -#define _VA_LIST -#else -/* Similarly, if this gets included first, do nothing in _int_varargs.h. */ -#define __INT_VARARGS_H -#endif - -#define __va_reg_p(TYPE) \ - (__builtin_classify_type(*(TYPE *)0) < 12 \ - ? sizeof(TYPE) <= 8 : sizeof(TYPE) == 4 && __alignof__(*(TYPE *)0) == 4) - -#define __va_size(TYPE) ((sizeof(TYPE) + 3) >> 2) - -/* We cast to void * and then to TYPE * because this avoids - a warning about increasing the alignment requirement. */ -#define va_arg(AP,TYPE) \ - ( (AP).__va_arg = (((AP).__va_arg + (1 << (__alignof__(*(TYPE *)0) >> 3)) - 1) \ - & ~((1 << (__alignof__(*(TYPE *)0) >> 3)) - 1)) \ - + __va_size(TYPE), \ - *((TYPE *) (void *) ((__va_reg_p(TYPE) \ - && (AP).__va_arg < 8 + __va_size(TYPE) \ - ? (AP).__va_reg : (AP).__va_stk) \ - + ((AP).__va_arg - __va_size(TYPE))))) - -#define va_end(AP) - -#endif /* defined (_STDARG_H) || defined (_VARARGS_H) */ diff --git a/sys/arch/mvme88k/include/varargs.h b/sys/arch/mvme88k/include/varargs.h deleted file mode 100644 index a04933a211c..00000000000 --- a/sys/arch/mvme88k/include/varargs.h +++ /dev/null @@ -1,189 +0,0 @@ -/* This file has local changes by MOTOROLA -Thu Sep 9 09:06:29 CDT 1993 Dale Rahn (drahn@pacific) - * (gstdarg.h, gvarargs.h) C-Front requires all builtins to - be defined. This is to insert these definitions if - __cplusplus is defined but not using the G++ compiler. - */ -#ifndef __GNUC__ -/* Use the system's macros with the system's compiler. */ -#include <varargs.h> -#else -/* Record that this is varargs.h; this turns off stdarg.h. */ - -#ifndef _VARARGS_H -#define _VARARGS_H - -#ifdef __sparc__ -#include <va-sparc.h> -#else -#ifdef __spur__ -#include <va-spur.h> -#else -#ifdef __mips__ -#include <va-mips.h> -#else -#ifdef __i860__ -#include <va-i860.h> -#else -#ifdef __pyr__ -#include <va-pyr.h> -#else -#ifdef __clipper__ -#include <va-clipper.h> -#else -#ifdef __m88k__ -#include <va-m88k.h> -#else -#if defined(__hppa__) || defined(hp800) -#include <va-pa.h> -#else -#ifdef __i960__ -#include <va-i960.h> -#else -#ifdef __alpha__ -#include <va-alpha.h> -#else - -#ifdef __NeXT__ - -/* On Next, erase any vestiges of stdarg.h. */ - -#ifdef _ANSI_STDARG_H_ -#define _VA_LIST_ -#endif -#define _ANSI_STDARG_H_ - -#undef va_alist -#undef va_dcl -#undef va_list -#undef va_start -#undef va_end -#undef __va_rounded_size -#undef va_arg -#endif /* __NeXT__ */ - -/* In GCC version 2, we want an ellipsis at the end of the declaration - of the argument list. GCC version 1 can't parse it. */ - -#if __GNUC__ > 1 -#define __va_ellipsis ... -#else -#define __va_ellipsis -#endif - -/* These macros implement traditional (non-ANSI) varargs - for GNU C. */ - -#define va_alist __builtin_va_alist -/* The ... causes current_function_varargs to be set in cc1. */ -#define va_dcl int __builtin_va_alist; __va_ellipsis - -/* Define __gnuc_va_list, just as in gstdarg.h. */ - -#ifndef __GNUC_VA_LIST -#define __GNUC_VA_LIST -#if defined(__svr4__) || defined(_AIX) || defined(_M_UNIX) -typedef char *__gnuc_va_list; -#else -typedef void *__gnuc_va_list; -#endif -#endif - -#define va_start(AP) AP=(char *) &__builtin_va_alist - -#define va_end(AP) - -#define __va_rounded_size(TYPE) \ - (((sizeof (TYPE) + sizeof (int) - 1) / sizeof (int)) * sizeof (int)) - -#if defined (__arm__) || defined (__i386__) || defined (__ns32000__) || defined (__vax__) -/* This is for little-endian machines; small args are padded upward. */ -#define va_arg(AP, TYPE) \ - (AP = (__gnuc_va_list) ((char *) (AP) + __va_rounded_size (TYPE)), \ - *((TYPE *) (void *) ((char *) (AP) - __va_rounded_size (TYPE)))) -#else /* big-endian */ -/* This is for big-endian machines; small args are padded downward. */ -#define va_arg(AP, TYPE) \ - (AP = (__gnuc_va_list) ((char *) (AP) + __va_rounded_size (TYPE)), \ - *((TYPE *) (void *) ((char *) (AP) - ((sizeof (TYPE) < 4 \ - ? sizeof (TYPE) \ - : __va_rounded_size (TYPE)))))) -#endif /* big-endian */ - -#endif /* not alpha */ -#endif /* not i960 */ -#endif /* not hppa */ -#endif /* not m88k */ -#endif /* not clipper */ -#endif /* not pyr */ -#endif /* not i860 */ -#endif /* not mips */ -#endif /* not spur */ -#endif /* not sparc */ -#endif /* not _VARARGS_H */ - -/* Define va_list from __gnuc_va_list. */ - -#ifdef _HIDDEN_VA_LIST /* On OSF1, this means varargs.h is "half-loaded". */ -#undef _VA_LIST -#endif - -#ifdef __svr4__ -/* SVR4.2 uses _VA_LIST for an internal alias for va_list, - so we must avoid testing it and setting it here. - SVR4 uses _VA_LIST as a flag in stdarg.h, but we should - have no conflict with that. */ -#ifndef _VA_LIST_ -#define _VA_LIST_ -#ifdef __i860__ -#ifndef _VA_LIST -#define _VA_LIST va_list -#endif -#endif /* __i860__ */ -typedef __gnuc_va_list va_list; -#endif /* _VA_LIST_ */ - -#else /* not __svr4__ */ - -/* The macro _VA_LIST_ is the same thing used by this file in Ultrix. - But on BSD NET2 we must not test or define or undef it. - (Note that the comments in NET 2's ansi.h - are incorrect for _VA_LIST_--see stdio.h!) */ -#if !defined (_VA_LIST_) || defined (__BSD_NET2__) || defined (____386BSD____) -/* The macro _VA_LIST is used in SCO Unix 3.2. */ -#ifndef _VA_LIST -/* The macro _VA_LIST_T_H is used in the Bull dpx2 */ -#ifndef _VA_LIST_T_H -#define _VA_LIST_T_H -#if !(defined (__BSD_NET2__) || defined (____386BSD____)) -#define _VA_LIST_ -#endif -#define _VA_LIST -typedef __gnuc_va_list va_list; -#endif /* not _VA_LIST_T_H */ -#endif /* not _VA_LIST */ -#endif /* not _VA_LIST_ */ - -#endif /* not __svr4__ */ - -/* The next BSD release (if there is one) wants this symbol to be - undefined instead of _VA_LIST_. */ -#ifdef _BSD_VA_LIST -#undef _BSD_VA_LIST -#endif -#if defined(__cplusplus) && !defined(__GNUG__) - -/* This is added to work with AT&T C++. */ -extern "C" { - char *__builtin_next_arg(void); - __gnuc_va_list *__builtin_saveregs(void); - void *__builtin_saveregs2(int); - int *__builtin_argptr(void); - int __builtin_argsize(void); - int __builtin_classify_type(...); - int __alignof__(...); -} -#endif - - -#endif /* __GNUC__ */ diff --git a/sys/arch/mvme88k/include/vid.h b/sys/arch/mvme88k/include/vid.h deleted file mode 100644 index acaa280dace..00000000000 --- a/sys/arch/mvme88k/include/vid.h +++ /dev/null @@ -1,56 +0,0 @@ -#define START_BLOCK 1 -#define LOADER_SIZE 2 -#define LOADER_ADDRESS 0x1F0000 - -#ifndef __ASSEMBLER__ -struct vid { - unsigned char vid_id[4]; - unsigned char vid_0[16]; - unsigned int vid_oss; - unsigned short vid_osl; - unsigned char vid_1[4]; - unsigned short vid_osa_u; - unsigned short vid_osa_l; - unsigned char vid_2[4]; - unsigned char vid_vd[20]; - unsigned char vid_3[86]; - unsigned int vid_cas; - unsigned char vid_cal; - unsigned char vid_4[99]; - unsigned char vid_mot[8]; -}; -struct cfg { - - unsigned char cfg_0[4]; - unsigned short cfg_atm; - unsigned short cfg_prm; - unsigned short cfg_atw; - unsigned short cfg_rec; - unsigned char cfg_1[12]; - unsigned char cfg_spt; - unsigned char cfg_hds; - unsigned short cfg_trk; - unsigned char cfg_ilv; - unsigned char cfg_sof; - unsigned short cfg_psm; - unsigned short cfg_shd; - unsigned char cfg_2[2]; - unsigned short cfg_pcom; - unsigned char cfg_3; - unsigned char cfg_ssr; - unsigned short cfg_rwcc; - unsigned short cfg_ecc; - unsigned short cfg_eatm; - unsigned short cfg_eprm; - unsigned short cfg_eatw; - unsigned char cfg_gpb1; - unsigned char cfg_gpb2; - unsigned char cfg_gpb3; - unsigned char cfg_gpb4; - unsigned char cfg_ssc; - unsigned char cfg_runit; - unsigned short cfg_rsvc1; - unsigned short cfg_rsvc2; - unsigned char cfg_4[196]; -}; -#endif diff --git a/sys/arch/mvme88k/include/vmparam.h b/sys/arch/mvme88k/include/vmparam.h deleted file mode 100644 index 586fb83fe38..00000000000 --- a/sys/arch/mvme88k/include/vmparam.h +++ /dev/null @@ -1,219 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1992 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ - -/* - * HISTORY - */ -/* - * File: vm_param.h - * - * machine dependent virtual memory parameters. - * Most of the declarations are preceeded by M88K_ (or m88k_) - * which is OK because only M88K specific code will be using - * them. - */ - - -#ifndef _MACHINE_VM_PARAM_ -#define _MACHINE_VM_PARAM_ - -/* - * USRTEXT is the start of the user text/data space, while USRSTACK - * is the top (end) of the user stack. - */ -#define USRTEXT 0x1000 /* Start of user text */ -#define USRSTACK 0x80000000 /* Start of user stack */ - -/* - * Virtual memory related constants, all in bytes - */ -#ifndef MAXTSIZ -#define MAXTSIZ (8*1024*1024) /* max text size */ -#endif -#ifndef DFLDSIZ -#define DFLDSIZ (16*1024*1024) /* initial data size limit */ -#endif -#ifndef MAXDSIZ -#define MAXDSIZ (64*1024*1024) /* max data size */ -#endif -#ifndef DFLSSIZ -#define DFLSSIZ (512*1024) /* initial stack size limit */ -#endif -#ifndef MAXSSIZ -#define MAXSSIZ MAXDSIZ /* max stack size */ -#endif - -/* - * Default sizes of swap allocation chunks (see dmap.h). - * The actual values may be changed in vminit() based on MAXDSIZ. - * With MAXDSIZ of 16Mb and NDMAP of 38, dmmax will be 1024. - * DMMIN should be at least ctod(1) so that vtod() works. - * vminit() insures this. - */ -#define DMMIN 32 /* smallest swap allocation */ -#define DMMAX 4096 /* largest potential swap allocation */ -#define DMTEXT 1024 /* swap allocation for text */ - -/* - * Size of shared memory map - */ -#ifndef SHMMAXPGS -#define SHMMAXPGS 1024 -#endif - -/* - * The time for a process to be blocked before being very swappable. - * This is a number of seconds which the system takes as being a non-trivial - * amount of real time. You probably shouldn't change this; - * it is used in subtle ways (fractions and multiples of it are, that is, like - * half of a ``long time'', almost a long time, etc.) - * It is related to human patience and other factors which don't really - * change over time. - */ -#define MAXSLP 20 - -/* - * A swapped in process is given a small amount of core without being bothered - * by the page replacement algorithm. Basically this says that if you are - * swapped in you deserve some resources. We protect the last SAFERSS - * pages against paging and will just swap you out rather than paging you. - * Note that each process has at least UPAGES+CLSIZE pages which are not - * paged anyways (this is currently 8+2=10 pages or 5k bytes), so this - * number just means a swapped in process is given around 25k bytes. - * Just for fun: current memory prices are 4600$ a megabyte on VAX (4/22/81), - * so we loan each swapped in process memory worth 100$, or just admit - * that we don't consider it worthwhile and swap it out to disk which costs - * $30/mb or about $0.75. - */ -#define SAFERSS 4 /* nominal ``small'' resident set size - protected against replacement */ - -#define VM_MINUSER_ADDRESS ((vm_offset_t) 0) -#define VM_MAXUSER_ADDRESS ((vm_offset_t) 0xffc00000U) - -#define VM_MINKERNEL_ADDRESS ((vm_offset_t) 0) -#define VM_MAXKERNEL_ADDRESS ((vm_offset_t) 0x1fffffff) - -/* - * Mach derived constants - */ -#define BYTE_SIZE 8 /* byte size in bits */ - -#define M88K_PGBYTES (1<<12) /* bytes per m88k page */ -#define M88K_PGSHIFT 12 /* number of bits to shift for pages */ - -/* - * Convert bytes to pages and convert pages to bytes. - * No rounding is used. - */ - -#define m88k_btop(x) (((unsigned)(x)) >> M88K_PGSHIFT) -#define m88k_ptob(x) (((unsigned)(x)) << M88K_PGSHIFT) - -/* - * Round off or truncate to the nearest page. These will work - * for either addresses or counts. (i.e. 1 byte rounds to 1 page - * bytes. - */ - -#define m88k_round_page(x) ((((unsigned)(x)) + M88K_PGBYTES - 1) & \ - ~(M88K_PGBYTES-1)) -#define m88k_trunc_page(x) (((unsigned)(x)) & ~(M88K_PGBYTES-1)) - -#define VM_MIN_ADDRESS ((vm_offset_t) 0) -#define VM_MAX_ADDRESS ((vm_offset_t) 0xffc00000U) - -#define VM_MIN_USER_ADDRESS ((vm_offset_t) 0) -#define VM_MAX_USER_ADDRESS ((vm_offset_t) 0xffc00000U) - -/* on vme188, max = 0xf0000000 */ - -#define VM_MIN_KERNEL_ADDRESS ((vm_offset_t) 0) -#define VM_MAX_KERNEL_ADDRESS ((vm_offset_t) 0x1fffffff) - -#define KERNEL_STACK_SIZE (3*4096) /* kernel stack size */ -#define INTSTACK_SIZE (3*4096) /* interrupt stack size */ - -/* virtual sizes (bytes) for various kernel submaps */ -#define VM_MBUF_SIZE (NMBCLUSTERS*MCLBYTES) -#define VM_KMEM_SIZE (NKMEMCLUSTERS*CLBYTES) - -/* - * Conversion between MACHINE pages and VM pages - */ - -#define trunc_m88k_to_vm(p) (atop(trunc_page(m88k_ptob(p)))) -#define round_m88k_to_vm(p) (atop(round_page(m88k_ptob(p)))) -#define vm_to_m88k(p) (m88k_btop(ptoa(p))) - -#if 1 /*Do we really need all this stuff*/ -#if 1 /*Do we really need all this stuff*/ -#if 1 /*Do we really need all this stuff*/ -#define M88K_SGPAGES (1<<10) /* pages per m88k segment */ -#define M88K_SGPGSHIFT 10 /* number of bits to shift for segment-page */ -#define M88K_ALSEGMS (1<<10) /* segments per m88k all space */ -#define M88K_ALSGSHIFT 10 /* number of bits to shift for all-segment */ - -#define M88K_SGBYTES (1<<22) /* bytes per m88k segments */ -#define M88K_SGSHIFT 22 /* number of bits to shift for segment */ -#define M88K_ALPAGES (1<<20) /* pages per m88k all space */ -#define M88K_ALPGSHIFT 20 /* number of bits to shift for all-page */ - -/* - * Convert bytes to pages and convert pages to bytes. - * No rounding is used. - */ - -#define m88k_btopr(x) (((unsigned)(x) + (M88K_PGBYTES - 1)) >> M88K_PGSHIFT) -#define m88k_btosr(x) (((unsigned)(x) + (M88K_SGBYTES - 1)) >> M88K_SGSHIFT) -#define m88k_btos(x) (((unsigned)(x)) >> M88K_SGSHIFT) -#define m88k_stob(x) (((unsigned)(x)) << M88K_SGSHIFT) -#define m88k_ptosr(x) (((unsigned)(x) + (M88K_SGPAGES - 1)) >> M88K_SGPGSHIFT) -#define m88k_ptos(x) (((unsigned)(x)) >> M88K_SGPGSHIFT) -#define m88k_stop(x) (((unsigned)(x)) << M88K_SGPGSHIFT) - -/* - * Round off or truncate to the nearest page. These will work - * for either addresses or counts. (i.e. 1 byte rounds to 1 page - * bytes. - */ - -#define m88k_round_segm(x) ((((unsigned)(x)) + M88K_SGBYTES - 1) & \ - ~(M88K_SGBYTES-1)) -#define m88k_next_segm(x) ((((unsigned)(x)) & ~(M88K_SGBYTES-1)) + \ - M88K_SGBYTES) -#define m88k_trunc_segm(x) (((unsigned)(x)) & ~(M88K_SGBYTES-1)) - -#define m88k_round_seg(x) ((((unsigned)(x)) + M88K_SGBYTES - 1) & \ - ~(M88K_SGBYTES-1)) -#define m88k_trunc_seg(x) (((unsigned)(x)) & ~(M88K_SGBYTES-1)) - -#define VEQR_ADDR 0x20000000 /* kernel virtual eq phy mapping */ -#endif /* Do we really need all this stuff */ -#endif /* Do we really need all this stuf */ -#endif /* Do we really need all this stuff */ - -#endif _MACHINE_VM_PARAM_ diff --git a/sys/arch/mvme88k/mvme88k/TODO b/sys/arch/mvme88k/mvme88k/TODO deleted file mode 100644 index a6151ebd11e..00000000000 --- a/sys/arch/mvme88k/mvme88k/TODO +++ /dev/null @@ -1,4 +0,0 @@ -1. It appears that trap() assumes instruction access or data access - faults can only be caused by page faults. Could do better by - checking PFSR in the CMMU and handling parity errors, page faults, - segmentation faults and protection faults appropriately. diff --git a/sys/arch/mvme88k/mvme88k/autoconf.c b/sys/arch/mvme88k/mvme88k/autoconf.c deleted file mode 100644 index de993596b2d..00000000000 --- a/sys/arch/mvme88k/mvme88k/autoconf.c +++ /dev/null @@ -1,204 +0,0 @@ -/* - * Copyright (c) 1994 Christian E. Hopps - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by Christian E. Hopps. - * 4. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * $Id: autoconf.c,v 1.1 1995/10/18 12:32:17 deraadt Exp $ - */ -#include <sys/param.h> -#include <sys/systm.h> -#include <sys/reboot.h> -#include <sys/conf.h> -#include <sys/device.h> -#include <sys/disklabel.h> -#include <machine/cpu.h> - -void configure __P((void)); -void setroot __P((void)); -void swapconf __P((void)); - -int realconfig=0; -int cold; /* 1 if still booting */ -#include <sys/kernel.h> -/* - * called at boot time, configure all devices on system - */ -void -configure() -{ - /* - * this is the real thing baby (i.e. not console init) - */ - realconfig = 1; - - if (config_rootfound("mainbus", "mainbus") == 0) - panic("no mainbus found"); - -#ifdef GENERIC - if ((boothowto & RB_ASKNAME) == 0) - setroot(); - setconf(); -#else - setroot(); -#endif - swapconf(); - cold = 0; -} - -/*ARGSUSED*/ -int -simple_devprint(auxp, pnp) - void *auxp; - char *pnp; -{ - return(QUIET); -} - -int -matchname(fp, sp) - char *fp, *sp; -{ - int len; - - len = strlen(fp); - if (strlen(sp) != len) - return(0); - if (bcmp(fp, sp, len) == 0) - return(1); - return(0); -} -/* - * this function needs to get enough configured to do a console - * basically this means start attaching the grfxx's that support - * the console. Kinda hacky but it works. - */ -int -config_console() -{ - struct cfdata *cf; - - /* - * we need mainbus' cfdata. - */ - cf = config_rootsearch(NULL, "mainbus", "mainbus"); - if (cf == NULL) - panic("no mainbus"); -} - -void -swapconf() -{ - struct swdevt *swp; - u_int maj; - int nb; - - for (swp = swdevt; swp->sw_dev > 0; swp++) { - maj = major(swp->sw_dev); - - if (maj > nblkdev) - break; - - if (bdevsw[maj].d_psize) { - nb = bdevsw[maj].d_psize(swp->sw_dev); - if (nb > 0 && - (swp->sw_nblks == 0 || swp->sw_nblks > nb)) - swp->sw_nblks = nb; - else - swp->sw_nblks = 0; - } - swp->sw_nblks = ctod(dtoc(swp->sw_nblks)); - } - if (dumplo == 0 && dumpdev != NODEV && bdevsw[major(dumpdev)].d_psize) - /*dumplo = (*bdevsw[major(dumpdev)].d_psize)(dumpdev) - physmem;*/ - dumplo = (*bdevsw[major(dumpdev)].d_psize)(dumpdev) - - ctob(physmem)/DEV_BSIZE; - if (dumplo < 0) - dumplo = 0; - -} - -#define DOSWAP /* change swdevt and dumpdev */ -u_long bootdev = 0; /* should be dev_t, but not until 32 bits */ - -static char devname[][2] = { - 0,0, - 0,0, - 0,0, - 0,0, - 's','d', /* 4 = sd -- new SCSI system */ -}; - -void -setroot() -{ - int majdev, mindev, unit, part, adaptor; - dev_t temp, orootdev; - struct swdevt *swp; - - printf("setroot boothowto %x bootdev %x\n", boothowto, bootdev); - if (boothowto & RB_DFLTROOT || - (bootdev & B_MAGICMASK) != (u_long)B_DEVMAGIC) - return; - majdev = (bootdev >> B_TYPESHIFT) & B_TYPEMASK; - if (majdev > sizeof(devname) / sizeof(devname[0])) - return; - adaptor = (bootdev >> B_ADAPTORSHIFT) & B_ADAPTORMASK; - part = (bootdev >> B_PARTITIONSHIFT) & B_PARTITIONMASK; - unit = (bootdev >> B_UNITSHIFT) & B_UNITMASK; - orootdev = rootdev; - rootdev = MAKEDISKDEV(majdev, unit, part); - /* - * If the original rootdev is the same as the one - * just calculated, don't need to adjust the swap configuration. - */ - if (rootdev == orootdev) - return; - printf("changing root device to %c%c%d%c\n", - devname[majdev][0], devname[majdev][1], - unit, part + 'a'); -#ifdef DOSWAP - mindev = DISKUNIT(rootdev); - for (swp = swdevt; swp->sw_dev; swp++) { - printf("DOSWAP swap %x dev %x\n", swp, swp->sw_dev); - if (majdev == major(swp->sw_dev) && - mindev == DISKUNIT(swp->sw_dev)) { - temp = swdevt[0].sw_dev; - swdevt[0].sw_dev = swp->sw_dev; - swp->sw_dev = temp; - break; - } - } - if (swp->sw_dev == 0) - return; - /* - * If dumpdev was the same as the old primary swap - * device, move it to the new primary swap device. - */ - if (temp == dumpdev) - dumpdev = swdevt[0].sw_dev; -#endif -} diff --git a/sys/arch/mvme88k/mvme88k/clock.c b/sys/arch/mvme88k/mvme88k/clock.c deleted file mode 100644 index ec5563e443e..00000000000 --- a/sys/arch/mvme88k/mvme88k/clock.c +++ /dev/null @@ -1,483 +0,0 @@ -/* - * Copyright (c) 1992, 1993 - * The Regents of the University of California. All rights reserved. - * - * This software was developed by the Computer Systems Engineering group - * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and - * contributed to Berkeley. - * - * All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Lawrence Berkeley Laboratory. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)clock.c 8.1 (Berkeley) 6/11/93 - * - * from: Header: clock.c,v 1.17 92/11/26 03:04:47 torek Exp (LBL) - * $Id: clock.c,v 1.1 1995/10/18 12:32:18 deraadt Exp $ - */ - -/* - * Clock driver. This is the id prom (``eeprom'') driver as well - * and includes the timer register functions too. - */ - -#include <sys/param.h> -#include <sys/kernel.h> -#include <sys/device.h> -#include <sys/proc.h> -#include <sys/resourcevar.h> -#ifdef GPROF -#include <sys/gmon.h> -#endif - -#include <vm/vm.h> - -#include <machine/autoconf.h> - -#include <sparc/sparc/clockreg.h> -#include <sparc/sparc/intreg.h> -#include <sparc/sparc/timerreg.h> - -/* - * Statistics clock interval and variance, in usec. Variance must be a - * power of two. Since this gives us an even number, not an odd number, - * we discard one case and compensate. That is, a variance of 1024 would - * give us offsets in [0..1023]. Instead, we take offsets in [1..1023]. - * This is symmetric about the point 512, or statvar/2, and thus averages - * to that value (assuming uniform random numbers). - */ -/* XXX fix comment to match value */ -int statvar = 8192; -int statmin; /* statclock interval - 1/2*variance */ - -static int clockmatch __P((struct device *, struct cfdata *, void *)); -static void clockattach __P((struct device *, struct device *, void *)); - -struct cfdriver clockcd = - { NULL, "clock", clockmatch, clockattach, DV_DULL, sizeof(struct device) }; - -static int timermatch __P((struct device *, struct cfdata *, void *)); -static void timerattach __P((struct device *, struct device *, void *)); -struct cfdriver timercd = - { NULL, "timer", timermatch, timerattach, DV_DULL, sizeof(struct device) }; - -/* - * The OPENPROM calls the clock the "eeprom", so we have to have our - * own special match function to call it the "clock". - */ -static int -clockmatch(parent, cf, aux) - struct device *parent; - struct cfdata *cf; - void *aux; -{ - - return (strcmp("eeprom", ((struct romaux *)aux)->ra_name) == 0); -} - -/* ARGSUSED */ -static void -clockattach(parent, self, aux) - struct device *parent, *self; - void *aux; -{ - register int h; - register struct clockreg *cl; - struct romaux *ra = aux; - char *prop; - - prop = getpropstring(ra->ra_node, "model"); - printf(": %s (eeprom)\n", prop); - /* - * We ignore any existing virtual address as we need to map - * this read-only and make it read-write only temporarily, - * whenever we read or write the clock chip. The clock also - * contains the ID ``PROM'', and I have already had the pleasure - * of reloading the cpu type, Ethernet address, etc, by hand from - * the console FORTH interpreter. I intend not to enjoy it again. - */ - if (strcmp(prop, "mk48t08") == 0) { - /* - * the MK48T08 is 8K - */ - cl = (struct clockreg *)mapiodev(ra->ra_paddr, 2 * NBPG); - pmap_changeprot(kernel_pmap, (vm_offset_t)cl, VM_PROT_READ, 1); - pmap_changeprot(kernel_pmap, (vm_offset_t)cl + NBPG, VM_PROT_READ, 1); - cl = (struct clockreg *)((int)cl + CLK_MK48T08_OFF); - } else { - /* - * the MK48T02 is 2K - */ - cl = (struct clockreg *)mapiodev(ra->ra_paddr, sizeof *clockreg); - pmap_changeprot(kernel_pmap, (vm_offset_t)cl, VM_PROT_READ, 1); - } - - h = cl->cl_idprom.id_machine << 24; - h |= cl->cl_idprom.id_hostid[0] << 16; - h |= cl->cl_idprom.id_hostid[1] << 8; - h |= cl->cl_idprom.id_hostid[2]; - hostid = h; - clockreg = cl; -} - -/* - * The OPENPROM calls the timer the "counter-timer". - */ -static int -timermatch(parent, cf, aux) - struct device *parent; - struct cfdata *cf; - void *aux; -{ - - return (strcmp("counter-timer", ((struct romaux *)aux)->ra_name) == 0); -} - -/* ARGSUSED */ -static void -timerattach(parent, self, aux) - struct device *parent, *self; - void *aux; -{ - register struct romaux *ra = aux; - - printf("\n"); - /* - * This time, we ignore any existing virtual address because - * we have a fixed virtual address for the timer, to make - * microtime() faster. - */ - (void)mapdev(ra->ra_paddr, TIMERREG_VA, sizeof(struct timerreg)); - /* should link interrupt handlers here, rather than compiled-in? */ -} - -/* - * Write en/dis-able clock registers. We coordinate so that several - * writers can run simultaneously. - */ -void -clk_wenable(onoff) - int onoff; -{ - register int s; - register vm_prot_t prot;/* nonzero => change prot */ - static int writers; - - s = splhigh(); - if (onoff) - prot = writers++ == 0 ? VM_PROT_READ|VM_PROT_WRITE : 0; - else - prot = --writers == 0 ? VM_PROT_READ : 0; - splx(s); - if (prot) - pmap_changeprot(kernel_pmap, (vm_offset_t)clockreg, prot, 1); -} - -/* - * XXX this belongs elsewhere - */ -void -myetheraddr(cp) - u_char *cp; -{ - register struct clockreg *cl = clockreg; - - cp[0] = cl->cl_idprom.id_ether[0]; - cp[1] = cl->cl_idprom.id_ether[1]; - cp[2] = cl->cl_idprom.id_ether[2]; - cp[3] = cl->cl_idprom.id_ether[3]; - cp[4] = cl->cl_idprom.id_ether[4]; - cp[5] = cl->cl_idprom.id_ether[5]; -} - -/* - * Delay: wait for `about' n microseconds to pass. - * This is easy to do on the SparcStation since we have - * freerunning microsecond timers -- no need to guess at - * cpu speed factors. We just wait for it to change n times - * (if we calculated a limit, we might overshoot, and precision - * is irrelevant here---we want less object code). - */ -delay(n) - register int n; -{ - register int c, t; - - if (timercd.cd_ndevs == 0) - panic("delay"); - c = TIMERREG->t_c10.t_counter; - while (--n >= 0) { - while ((t = TIMERREG->t_c10.t_counter) == c) - continue; - c = t; - } -} - -/* - * Set up the real-time and statistics clocks. Leave stathz 0 only if - * no alternative timer is available. - * - * The frequencies of these clocks must be an even number of microseconds. - */ -cpu_initclocks() -{ - register int statint, minint; - - if (1000000 % hz) { - printf("cannot get %d Hz clock; using 100 Hz\n", hz); - hz = 100; - tick = 1000000 / hz; - } - if (stathz == 0) - stathz = hz; - if (1000000 % stathz) { - printf("cannot get %d Hz statclock; using 100 Hz\n", stathz); - stathz = 100; - } - profhz = stathz; /* always */ - - statint = 1000000 / stathz; - minint = statint / 2 + 100; - while (statvar > minint) - statvar >>= 1; - TIMERREG->t_c10.t_limit = tmr_ustolim(tick); - TIMERREG->t_c14.t_limit = tmr_ustolim(statint); - statmin = statint - (statvar >> 1); - ienab_bis(IE_L14 | IE_L10); -} - -/* - * Dummy setstatclockrate(), since we know profhz==hz. - */ -/* ARGSUSED */ -void -setstatclockrate(newhz) - int newhz; -{ - /* nothing */ -} - -/* - * Clock interrupts. - */ -int -clockintr(cap) - void *cap; -{ - volatile register unsigned char icr; - /* clear clock interrupt */ - asm ("ld.b %0,%1" : "=r" (icr) : "" (TIMER2ICR)); - icr |= ICLR; - asm ("st.b %0,%1" : "=r" (icr) : "" (TIMER2ICR)); - - /* read the limit register to clear the interrupt */ - hardclock((struct clockframe *)cap); - - return (1); -} - -/* - * BCD to decimal and decimal to BCD. - */ -#define FROMBCD(x) (((x) >> 4) * 10 + ((x) & 0xf)) -#define TOBCD(x) (((x) / 10 * 16) + ((x) % 10)) - -#define SECDAY (24 * 60 * 60) -#define SECYR (SECDAY * 365) -#define LEAPYEAR(y) (((y) & 3) == 0) - -/* - * This code is defunct after 2068. - * Will Unix still be here then?? - */ -const short dayyr[12] = - { 0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334 }; - -chiptotime(sec, min, hour, day, mon, year) - register int sec, min, hour, day, mon, year; -{ - register int days, yr; - - sec = FROMBCD(sec); - min = FROMBCD(min); - hour = FROMBCD(hour); - day = FROMBCD(day); - mon = FROMBCD(mon); - year = FROMBCD(year) + YEAR0; - - /* simple sanity checks */ - if (year < 70 || mon < 1 || mon > 12 || day < 1 || day > 31) - return (0); - days = 0; - for (yr = 70; yr < year; yr++) - days += LEAPYEAR(yr) ? 366 : 365; - days += dayyr[mon - 1] + day - 1; - if (LEAPYEAR(yr) && mon > 2) - days++; - /* now have days since Jan 1, 1970; the rest is easy... */ - return (days * SECDAY + hour * 3600 + min * 60 + sec); -} - -struct chiptime { - int sec; - int min; - int hour; - int wday; - int day; - int mon; - int year; -}; - -timetochip(c) - register struct chiptime *c; -{ - register int t, t2, t3, now = time.tv_sec; - - /* compute the year */ - t2 = now / SECDAY; - t3 = (t2 + 2) % 7; /* day of week */ - c->wday = TOBCD(t3 + 1); - - t = 69; - while (t2 >= 0) { /* whittle off years */ - t3 = t2; - t++; - t2 -= LEAPYEAR(t) ? 366 : 365; - } - c->year = t; - - /* t3 = month + day; separate */ - t = LEAPYEAR(t); - for (t2 = 1; t2 < 12; t2++) - if (t3 < dayyr[t2] + (t && t2 > 1)) - break; - - /* t2 is month */ - c->mon = t2; - c->day = t3 - dayyr[t2 - 1] + 1; - if (t && t2 > 2) - c->day--; - - /* the rest is easy */ - t = now % SECDAY; - c->hour = t / 3600; - t %= 3600; - c->min = t / 60; - c->sec = t % 60; - - c->sec = TOBCD(c->sec); - c->min = TOBCD(c->min); - c->hour = TOBCD(c->hour); - c->day = TOBCD(c->day); - c->mon = TOBCD(c->mon); - c->year = TOBCD(c->year - YEAR0); -} - -/* - * Set up the system's time, given a `reasonable' time value. - */ -inittodr(base) - time_t base; -{ - register struct clockreg *cl = clockreg; - int sec, min, hour, day, mon, year; - int badbase = 0, waszero = base == 0; - - if (base < 5 * SECYR) { - /* - * If base is 0, assume filesystem time is just unknown - * in stead of preposterous. Don't bark. - */ - if (base != 0) - printf("WARNING: preposterous time in file system\n"); - /* not going to use it anyway, if the chip is readable */ - base = 21*SECYR + 186*SECDAY + SECDAY/2; - badbase = 1; - } - clk_wenable(1); - cl->cl_csr |= CLK_READ; /* enable read (stop time) */ - sec = cl->cl_sec; - min = cl->cl_min; - hour = cl->cl_hour; - day = cl->cl_mday; - mon = cl->cl_month; - year = cl->cl_year; - cl->cl_csr &= ~CLK_READ; /* time wears on */ - clk_wenable(0); - if ((time.tv_sec = chiptotime(sec, min, hour, day, mon, year)) == 0) { - printf("WARNING: bad date in battery clock"); - /* - * Believe the time in the file system for lack of - * anything better, resetting the clock. - */ - time.tv_sec = base; - if (!badbase) - resettodr(); - } else { - int deltat = time.tv_sec - base; - - if (deltat < 0) - deltat = -deltat; - if (waszero || deltat < 2 * SECDAY) - return; - printf("WARNING: clock %s %d days", - time.tv_sec < base ? "lost" : "gained", deltat / SECDAY); - } - printf(" -- CHECK AND RESET THE DATE!\n"); -} - -/* - * Reset the clock based on the current time. - * Used when the current clock is preposterous, when the time is changed, - * and when rebooting. Do nothing if the time is not yet known, e.g., - * when crashing during autoconfig. - */ -resettodr() -{ - register struct clockreg *cl; - struct chiptime c; - - if (!time.tv_sec || (cl = clockreg) == NULL) - return; - timetochip(&c); - clk_wenable(1); - cl->cl_csr |= CLK_WRITE; /* enable write */ - cl->cl_sec = c.sec; - cl->cl_min = c.min; - cl->cl_hour = c.hour; - cl->cl_wday = c.wday; - cl->cl_mday = c.day; - cl->cl_month = c.mon; - cl->cl_year = c.year; - cl->cl_csr &= ~CLK_WRITE; /* load them up */ - clk_wenable(0); -} diff --git a/sys/arch/mvme88k/mvme88k/cmmu.c b/sys/arch/mvme88k/mvme88k/cmmu.c deleted file mode 100644 index 2b76a62aeb2..00000000000 --- a/sys/arch/mvme88k/mvme88k/cmmu.c +++ /dev/null @@ -1,1199 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ -/* - * HISTORY - */ - - -#define SNOOP_ENABLE -#define SHADOW_BATC 0 - -#ifndef NBPG -#define NBPG 4096 -#endif /* NBPG */ - -struct cmmu_regs -{ - /* base + $000 */ volatile unsigned idr; - /* base + $004 */ volatile unsigned scr; - /* base + $008 */ volatile unsigned ssr; - /* base + $00C */ volatile unsigned sar; - /* */ unsigned padding1[0x3D]; - /* base + $104 */ volatile unsigned sctr; - /* base + $108 */ volatile unsigned pfSTATUSr; - /* base + $10C */ volatile unsigned pfADDRr; - /* */ unsigned padding2[0x3C]; - /* base + $200 */ volatile unsigned sapr; - /* base + $204 */ volatile unsigned uapr; - /* */ unsigned padding3[0x7E]; - /* base + $400 */ volatile unsigned bwp[8]; - /* */ unsigned padding4[0xF8]; - /* base + $800 */ volatile unsigned cdp[4]; - /* */ unsigned padding5[0x0C]; - /* base + $840 */ volatile unsigned ctp[4]; - /* */ unsigned padding6[0x0C]; - /* base + $880 */ volatile unsigned cssp; - - /* The rest for the 88204 */ - #define cssp0 cssp - /* */ unsigned padding7[0x03]; - /* base + $890 */ volatile unsigned cssp1; - /* */ unsigned padding8[0x03]; - /* base + $8A0 */ volatile unsigned cssp2; - /* */ unsigned padding9[0x03]; - /* base + $8B0 */ volatile unsigned cssp3; - - - - - - -}; - - -#include <sys/param.h> -#include <sys/types.h> -#include <machine/board.h> -#include <machine/cpus.h> -#if 0 -#include <vm/pmap.h> -#endif - - -static struct cmmu { - struct cmmu_regs *cmmu_regs; /* CMMU "base" area */ - unsigned char cmmu_cpu; /* cpu number it is attached to */ - unsigned char which; /* either INST_CMMU || DATA_CMMU */ - unsigned char cmmu_alive; - #define CMMU_DEAD 0 /* This cmmu not there */ - #define CMMU_AVAILABLE 1 /* It's there, but which cpu's? */ - #define CMMU_MARRIED 2 /* Know which cpu it belongs to. */ - #if SHADOW_BATC - unsigned batc[8]; - #endif - unsigned char pad; -} cmmu[MAX_CMMUS] = { - {(void *)CMMU_I, 0, 0, 0, 0}, - {(void *)CMMU_D, 0, 1, 0, 0}, -}; - -#include <machine/m882xx.h> -/* - * We rely upon and use INST_CMMU == 0 and DATA_CMMU == 1 - */ -#if INST_CMMU != 0 || DATA_CMMU != 1 - error("ack gag barf!"); -#endif -struct cpu_cmmu { - struct cmmu *pair[2]; -} cpu_cmmu[1]; - -/* - * CMMU(cpu,data) Is the cmmu struct for the named cpu's indicated cmmu. - * REGS(cpu,data) is the actual register structure. - */ -#define CMMU(cpu, data) cpu_cmmu[(cpu)].pair[(data)?DATA_CMMU:INST_CMMU] -#define REGS(cpu, data) (*CMMU(cpu, data)->cmmu_regs) - -unsigned cache_policy = 0; - -#ifdef CMMU_DEBUG -void show_apr(unsigned value) -{ - union apr_template apr_template; - apr_template.bits = value; - _printf("table @ 0x%x000", apr_template.field.st_base); - if (apr_template.field.wt) printf(", writethrough"); - if (apr_template.field.g) printf(", global"); - if (apr_template.field.ci) printf(", cache inhibit"); - if (apr_template.field.te) printf(", valid"); - else printf(", not valid"); - printf("]\n"); -} - -void show_sctr(unsigned value) -{ - union { - unsigned bits; - struct { - unsigned :16, - pe: 1, - se: 1, - pr: 1, - :13; - } fields; - } sctr; - sctr.bits = value; - printf("%spe, %sse %spr]\n", - sctr.fields.pe ? "" : "!", - sctr.fields.se ? "" : "!", - sctr.fields.pr ? "" : "!"); -} -#endif - -/* - * CMMU initialization routine - */ -void cmmu_init(void) -{ - unsigned tmp, cmmu_num; - union cpupid id; - int cpu; - - cpu_cmmu[0].pair[INST_CMMU] = cpu_cmmu[0].pair[DATA_CMMU] = 0; - - for (cmmu_num = 0; cmmu_num < MAX_CMMUS; cmmu_num++) { - if (!wprobe((vm_offset_t)cmmu[cmmu_num].cmmu_regs, -1)) { - id.cpupid = cmmu[cmmu_num].cmmu_regs->idr; - if (id.m88200.type != M88200 && id.m88200.type != M88204) - continue; - cmmu[cmmu_num].cmmu_alive = CMMU_AVAILABLE; - - cpu_cmmu[cmmu[cmmu_num].cmmu_cpu].pair[cmmu[cmmu_num].which] = - &cmmu[cmmu_num]; - - /* - * Reset cache data.... - * as per M88200 Manual (2nd Ed.) section 3.11. - */ - for (tmp = 0; tmp < 255; tmp++) { - cmmu[cmmu_num].cmmu_regs->sar = tmp << 4; - cmmu[cmmu_num].cmmu_regs->cssp = 0x3f0ff000; - } - - /* 88204 has additional cache to clear */ - if(id.m88200.type == M88204) - { - for (tmp = 0; tmp < 255; tmp++) { - cmmu[cmmu_num].cmmu_regs->sar = tmp<<4; - cmmu[cmmu_num].cmmu_regs->cssp1 = 0x3f0ff000; - } - for (tmp = 0; tmp < 255; tmp++) { - cmmu[cmmu_num].cmmu_regs->sar = tmp<<4; - cmmu[cmmu_num].cmmu_regs->cssp2 = 0x3f0ff000; - } - for (tmp = 0; tmp < 255; tmp++) { - cmmu[cmmu_num].cmmu_regs->sar = tmp<<4; - cmmu[cmmu_num].cmmu_regs->cssp3 = 0x3f0ff000; - } - } - - /* - * Set the SCTR, SAPR, and UAPR to some known state - * (I don't trust the reset to do it). - */ - tmp = - ! CMMU_SCTR_PE | /* not parity enable */ - ! CMMU_SCTR_SE | /* not snoop enable */ - ! CMMU_SCTR_PR ; /* not priority arbitration */ - cmmu[cmmu_num].cmmu_regs->sctr = tmp; - - tmp = - (0x00000 << 12) | /* segment table base address */ - AREA_D_WT | /* write through */ - AREA_D_G | /* global */ - AREA_D_CI | /* cache inhibit */ - ! AREA_D_TE ; /* not translation enable */ - cmmu[cmmu_num].cmmu_regs->sapr = - cmmu[cmmu_num].cmmu_regs->uapr = tmp; - - -#if SHADOW_BATC - cmmu[cmmu_num].batc[0] = - cmmu[cmmu_num].batc[1] = - cmmu[cmmu_num].batc[2] = - cmmu[cmmu_num].batc[3] = - cmmu[cmmu_num].batc[4] = - cmmu[cmmu_num].batc[5] = - cmmu[cmmu_num].batc[6] = - cmmu[cmmu_num].batc[7] = 0; -#endif - cmmu[cmmu_num].cmmu_regs->bwp[0] = - cmmu[cmmu_num].cmmu_regs->bwp[1] = - cmmu[cmmu_num].cmmu_regs->bwp[2] = - cmmu[cmmu_num].cmmu_regs->bwp[3] = - cmmu[cmmu_num].cmmu_regs->bwp[4] = - cmmu[cmmu_num].cmmu_regs->bwp[5] = - cmmu[cmmu_num].cmmu_regs->bwp[6] = - cmmu[cmmu_num].cmmu_regs->bwp[7] = 0; - cmmu[cmmu_num].cmmu_regs->scr = CMMU_FLUSH_CACHE_INV_ALL; - cmmu[cmmu_num].cmmu_regs->scr = CMMU_FLUSH_SUPER_ALL; - cmmu[cmmu_num].cmmu_regs->scr = CMMU_FLUSH_USER_ALL; - } - } - - /* - * Now that we know which CMMUs are there, let's report on which - * CPU/CMMU sets seem complete (hopefully all) - */ - for (cpu = 0; cpu < MAX_CPUS; cpu++) - { - if (cpu_cmmu[cpu].pair[INST_CMMU] && cpu_cmmu[cpu].pair[DATA_CMMU]) - { - if(id.m88200.type == M88204) - printf("CPU%d is attached with MC88204 CMMU\n", cpu); - else - printf("CPU%d is attached with MC88200 CMMU\n", cpu); - - } - else if (cpu_cmmu[cpu].pair[INST_CMMU]) - { - printf("CPU%d data CMMU is not working.\n", cpu); - panic("cmmu-data"); - } - else if (cpu_cmmu[cpu].pair[DATA_CMMU]) - { - printf("CPU%d instruction CMMU is not working.\n", cpu); - panic("cmmu"); - } - else - { - } - } - - /* - * Enable snooping... - */ - for (cpu = 0; cpu < MAX_CPUS; cpu++) - { - /* - * Enable snooping. - * We enable it for instruction cmmus as well so that we can have - * breakpoints, etc, and modify code. - */ - tmp = - ! CMMU_SCTR_PE | /* not parity enable */ - CMMU_SCTR_SE | /* snoop enable */ - ! CMMU_SCTR_PR ; /* not priority arbitration */ - REGS(cpu, DATA_CMMU).sctr = tmp; - REGS(cpu, INST_CMMU).sctr = tmp; - REGS(cpu, DATA_CMMU).scr = CMMU_FLUSH_SUPER_ALL; - REGS(cpu, INST_CMMU).scr = CMMU_FLUSH_SUPER_ALL; - } - - /* - * Turn on some cache. - */ - for (cpu = 0; cpu < MAX_CPUS; cpu++) - { - /* - * Enable some caching for the instruction stream. - * Can't cache data yet 'cause device addresses can never - * be cached, and we don't have those no-caching zones - * set up yet.... - */ - tmp = - (0x00000 << 12) | /* segment table base address */ - AREA_D_WT | /* write through */ - AREA_D_G | /* global */ - AREA_D_CI | /* cache inhibit */ - ! AREA_D_TE ; /* not translation enable */ - REGS(cpu, INST_CMMU).sapr = tmp; - REGS(cpu, DATA_CMMU).scr = CMMU_FLUSH_SUPER_ALL; - } -} - -/* - * Just before poweroff or reset.... - */ -void cmmu_shutdown_now(void) -{ -#if 0 /* was trying to fix a reboot problem... doesn't seem to help */ - unsigned tmp; - unsigned cmmu_num; - - /* - * Now set some state as we like... - */ - for (cmmu_num = 0; cmmu_num < MAX_CMMUS; cmmu_num++) - { - tmp = - ! CMMU_SCTR_PE | /* parity enable */ - ! CMMU_SCTR_SE | /* snoop enable */ - ! CMMU_SCTR_PR ; /* priority arbitration */ - cmmu[cmmu_num].cmmu_regs->sctr = tmp; - - - tmp = - (0x00000 << 12) | /* segment table base address */ - ! AREA_D_WT | /* write through */ - ! AREA_D_G | /* global */ - AREA_D_CI | /* cache inhibit */ - ! AREA_D_TE ; /* translation enable */ - cmmu[cmmu_num].cmmu_regs->sapr = tmp; - cmmu[cmmu_num].cmmu_regs->uapr = tmp; - } -#endif -} - - -/* - * enable parity - */ -void cmmu_parity_enable(void) -{ -#ifdef PARITY_ENABLE - register int cmmu_num; - - for (cmmu_num = 0; cmmu_num < MAX_CMMUS; cmmu_num++) { - if (cmmu[cmmu_num].cmmu_alive != CMMU_DEAD) { - cmmu[cmmu_num].cmmu_regs->sctr |= CMMU_SCTR_PE; - } - } -#endif PARITY_ENABLE -} - -/* - * Find out the CPU number from accessing CMMU - * Better be at splhigh, or even better, with interrupts - * disabled. - */ -unsigned cmmu_cpu_number(void) -{ - register unsigned cmmu_no; - int i; - - for (i=0; i < 10; i++) - { - /* clear CMMU p-bus status registers */ - for (cmmu_no = 0; cmmu_no < MAX_CMMUS; cmmu_no++) - { - if (cmmu[cmmu_no].cmmu_alive == CMMU_AVAILABLE && - cmmu[cmmu_no].which == DATA_CMMU) - cmmu[cmmu_no].cmmu_regs->pfSTATUSr = 0; - } - - /* access faulting address */ - badwordaddr((void *)ILLADDRESS); - - /* check which CMMU reporting the fault */ - for (cmmu_no = 0; cmmu_no < MAX_CMMUS; cmmu_no++) - { - if (cmmu[cmmu_no].cmmu_alive == CMMU_AVAILABLE && - cmmu[cmmu_no].which == DATA_CMMU && - cmmu[cmmu_no].cmmu_regs->pfSTATUSr & 0x70000) - { - if (cmmu[cmmu_no].cmmu_regs->pfSTATUSr & 0x70000) - { - cmmu[cmmu_no].cmmu_regs->pfSTATUSr = 0; /* to be clean */ - cmmu[cmmu_no].cmmu_alive = CMMU_MARRIED; - return cmmu[cmmu_no].cmmu_cpu; - } - } - } - } -printf("at cmmu.c line %d.\n", __LINE__); - - panic("could not determine my cpu number"); - return 0; /* to make compiler happy */ -} - -/** - ** Funcitons that actually modify CMMU registers. - **/ - -#if !DDB -static -#endif -void cmmu_remote_set(unsigned cpu, unsigned r, unsigned data, unsigned x) -{ - *(volatile unsigned *)(r + (char*)®S(cpu,data)) = x; -} - -/* - * cmmu_cpu_lock should be held when called if read - * the CMMU_SCR or CMMU_SAR. -**/ -#if !DDB -static -#endif -unsigned cmmu_remote_get(unsigned cpu, unsigned r, unsigned data) -{ - return *(volatile unsigned *)(r + (char*)®S(cpu,data)); -} - -/* Needs no locking - read only registers */ -unsigned cmmu_get_idr(unsigned data) -{ - return REGS(0,data).idr; -} - -void cmmu_set_sapr(unsigned ap) -{ - int cpu = 0; - if (cache_policy & CACHE_INH) - ap |= AREA_D_CI; - - REGS(cpu, INST_CMMU).sapr = ap; - REGS(cpu, DATA_CMMU).sapr = ap; -} - -void cmmu_remote_set_sapr(unsigned cpu, unsigned ap) -{ - if (cache_policy & CACHE_INH) - ap |= AREA_D_CI; - REGS(cpu, INST_CMMU).sapr = ap; - REGS(cpu, DATA_CMMU).sapr = ap; -} - -void cmmu_set_uapr(unsigned ap) -{ - int cpu = 0; - /* this functionality also mimiced in cmmu_pmap_activate() */ - REGS(cpu, INST_CMMU).uapr = ap; - REGS(cpu, DATA_CMMU).uapr = ap; -} - -/* - * Set batc entry number entry_no to value in - * the data or instruction cache depending on data. - * - * Except for the cmmu_init, this function, cmmu_set_pair_batc_entry, - * and cmmu_pmap_activate are the only functions which may set the - * batc values. - */ -void cmmu_set_batc_entry( - unsigned cpu, - unsigned entry_no, - unsigned data, /* 1 = data, 0 = instruction */ - unsigned value) /* the value to stuff into the batc */ -{ - - REGS(cpu,data).bwp[entry_no] = value; - #if SHADOW_BATC - CMMU(cpu,data)->batc[entry_no] = value; - #endif -#if 0 /* was for debugging piece (peace?) of mind */ - REGS(cpu,data).scr = CMMU_FLUSH_SUPER_ALL; - REGS(cpu,data).scr = CMMU_FLUSH_USER_ALL; -#endif - -} - -/* - * Set batc entry number entry_no to value in - * the data and instruction cache for the named CPU. - */ -void cmmu_set_pair_batc_entry( - unsigned cpu, - unsigned entry_no, - unsigned value) /* the value to stuff into the batc */ -{ - - REGS(cpu,DATA_CMMU).bwp[entry_no] = value; - #if SHADOW_BATC - CMMU(cpu,DATA_CMMU)->batc[entry_no] = value; - #endif - REGS(cpu,INST_CMMU).bwp[entry_no] = value; - #if SHADOW_BATC - CMMU(cpu,INST_CMMU)->batc[entry_no] = value; - #endif - -#if 0 /* was for debugging piece (peace?) of mind */ - REGS(cpu,INST_CMMU).scr = CMMU_FLUSH_SUPER_ALL; - REGS(cpu,INST_CMMU).scr = CMMU_FLUSH_USER_ALL; - REGS(cpu,DATA_CMMU).scr = CMMU_FLUSH_SUPER_ALL; - REGS(cpu,DATA_CMMU).scr = CMMU_FLUSH_USER_ALL; -#endif - -} - -/** - ** Functions that invalidate TLB entries. - **/ - -/* - * flush any tlb - * Some functionality mimiced in cmmu_pmap_activate. - */ -void cmmu_flush_remote_tlb( - unsigned cpu, - unsigned kernel, - vm_offset_t vaddr, - int size) -{ - register s = splhigh(); - - if ((unsigned)size > M88K_PGBYTES) - { - REGS(cpu, INST_CMMU).scr = - REGS(cpu, DATA_CMMU).scr = - kernel ? CMMU_FLUSH_SUPER_ALL : CMMU_FLUSH_USER_ALL; - } - else /* a page or smaller */ - { - REGS(cpu, INST_CMMU).sar = (unsigned)vaddr; - REGS(cpu, DATA_CMMU).sar = (unsigned)vaddr; - - REGS(cpu, INST_CMMU).scr = - REGS(cpu, DATA_CMMU).scr = - kernel ? CMMU_FLUSH_SUPER_PAGE : CMMU_FLUSH_USER_PAGE; - } - splx(s); -} - -/* - * flush my personal tlb - */ -void cmmu_flush_tlb(unsigned kernel, vm_offset_t vaddr, int size) -{ - cmmu_flush_remote_tlb(0, kernel, vaddr, size); -} - - -/* - * New fast stuff for pmap_activate. - * Does what a few calls used to do. - * Only called from pmap.c's _pmap_activate(). - */ -void cmmu_pmap_activate( - unsigned cpu, - unsigned uapr, - batc_template_t i_batc[BATC_MAX], - batc_template_t d_batc[BATC_MAX]) -{ - int entry_no; - - /* the following is from cmmu_set_uapr */ - REGS(cpu, INST_CMMU).uapr = uapr; - REGS(cpu, DATA_CMMU).uapr = uapr; - - for (entry_no = 0; entry_no < BATC_MAX; entry_no++) { - REGS(cpu,INST_CMMU).bwp[entry_no] = i_batc[entry_no].bits; - REGS(cpu,DATA_CMMU).bwp[entry_no] = d_batc[entry_no].bits; - #if SHADOW_BATC - CMMU(cpu,INST_CMMU)->batc[entry_no] = i_batc[entry_no].bits; - CMMU(cpu,DATA_CMMU)->batc[entry_no] = d_batc[entry_no].bits; - #endif - } - - /* - * Flush the user TLB. - * IF THE KERNEL WILL EVER CARE ABOUT THE BATC ENTRIES, - * THE SUPERVISOR TLBs SHOULB EE FLUSHED AS WELL. - */ - REGS(cpu, INST_CMMU).scr = CMMU_FLUSH_USER_ALL; - REGS(cpu, DATA_CMMU).scr = CMMU_FLUSH_USER_ALL; -} - -/** - ** Functions that invalidate caches. - ** - ** Cache invalidates require physical addresses. Care must be exercised when - ** using segment invalidates. This implies that the starting physical address - ** plus the segment length should be invalidated. A typical mistake is to - ** extract the first physical page of a segment from a virtual address, and - ** then expecting to invalidate when the pages are not physically contiguous. - ** - ** We don't push Instruction Caches prior to invalidate because they are not - ** snooped and never modified (I guess it doesn't matter then which form - ** of the command we use then). - **/ -/* - * flush both Instruction and Data caches - */ -void cmmu_flush_remote_cache(int cpu, vm_offset_t physaddr, int size) -{ - register s = splhigh(); - - - if (size < 0 || size > NBSG ) { - REGS(cpu, INST_CMMU).scr = CMMU_FLUSH_CACHE_CBI_ALL; - REGS(cpu, DATA_CMMU).scr = CMMU_FLUSH_CACHE_CBI_ALL; - } - else if (size <= 16) { - REGS(cpu, INST_CMMU).sar = (unsigned)physaddr; - REGS(cpu, DATA_CMMU).sar = (unsigned)physaddr; - REGS(cpu, INST_CMMU).scr = CMMU_FLUSH_CACHE_CBI_LINE; - REGS(cpu, DATA_CMMU).scr = CMMU_FLUSH_CACHE_CBI_LINE; - } - else if (size <= NBPG) { - REGS(cpu, INST_CMMU).sar = (unsigned)physaddr; - REGS(cpu, DATA_CMMU).sar = (unsigned)physaddr; - REGS(cpu, INST_CMMU).scr = CMMU_FLUSH_CACHE_CBI_PAGE; - REGS(cpu, DATA_CMMU).scr = CMMU_FLUSH_CACHE_CBI_PAGE; - } - else { - REGS(cpu, INST_CMMU).sar = (unsigned)physaddr; - REGS(cpu, DATA_CMMU).sar = (unsigned)physaddr; - REGS(cpu, INST_CMMU).scr = CMMU_FLUSH_CACHE_CBI_SEGMENT; - REGS(cpu, DATA_CMMU).scr = CMMU_FLUSH_CACHE_CBI_SEGMENT; - } - - - splx(s); -} - -/* - * flush both Instruction and Data caches - */ -void cmmu_flush_cache(vm_offset_t physaddr, int size) -{ - cmmu_flush_remote_cache(0, physaddr, size); -} - -/* - * flush Instruction caches - */ -void cmmu_flush_remote_inst_cache(int cpu, vm_offset_t physaddr, int size) -{ - register s = splhigh(); - - - if (size < 0 || size > NBSG ) { - REGS(cpu, INST_CMMU).scr = CMMU_FLUSH_CACHE_CBI_ALL; - } - else if (size <= 16) { - REGS(cpu, INST_CMMU).sar = (unsigned)physaddr; - REGS(cpu, INST_CMMU).scr = CMMU_FLUSH_CACHE_CBI_LINE; - } - else if (size <= NBPG) { - REGS(cpu, INST_CMMU).sar = (unsigned)physaddr; - REGS(cpu, INST_CMMU).scr = CMMU_FLUSH_CACHE_CBI_PAGE; - } - else { - REGS(cpu, INST_CMMU).sar = (unsigned)physaddr; - REGS(cpu, INST_CMMU).scr = CMMU_FLUSH_CACHE_CBI_SEGMENT; - } - - - splx(s); -} - -/* - * flush Instruction caches - */ -void cmmu_flush_inst_cache(vm_offset_t physaddr, int size) -{ - cmmu_flush_remote_inst_cache(0, physaddr, size); -} - -void cmmu_flush_remote_data_cache(int cpu, vm_offset_t physaddr, int size) -{ - register s = splhigh(); - - - if (size < 0 || size > NBSG ) { - REGS(cpu, DATA_CMMU).scr = CMMU_FLUSH_CACHE_CBI_ALL; - } - else if (size <= 16) { - REGS(cpu, DATA_CMMU).sar = (unsigned)physaddr; - REGS(cpu, DATA_CMMU).scr = CMMU_FLUSH_CACHE_CBI_LINE; - } - else if (size <= NBPG) { - REGS(cpu, DATA_CMMU).sar = (unsigned)physaddr; - REGS(cpu, DATA_CMMU).scr = CMMU_FLUSH_CACHE_CBI_PAGE; - } - else { - REGS(cpu, DATA_CMMU).sar = (unsigned)physaddr; - REGS(cpu, DATA_CMMU).scr = CMMU_FLUSH_CACHE_CBI_SEGMENT; - } - - - splx(s); -} - -/* - * flush data cache - */ -void cmmu_flush_data_cache(vm_offset_t physaddr, int size) -{ - cmmu_flush_remote_data_cache(0, physaddr, size); -} - - -#if 0 -#if DDB -union ssr { - unsigned bits; - struct { - unsigned :16, - ce:1, - be:1, - :4, - wt:1, - sp:1, - g:1, - ci:1, - :1, - m:1, - u:1, - wp:1, - bh:1, - v:1; - } field; -}; - -union cssp { - unsigned bits; - struct { - unsigned : 2, - l: 6, - d3: 1, - d2: 1, - d1: 1, - d0: 1, - vv3: 2, - vv2: 2, - vv1: 2, - vv0: 2, - :12; - } field; -}; - -union batcu { - unsigned bits; - struct { /* block address translation register */ - unsigned int - lba:13, /* logical block address */ - pba:13, /* physical block address */ - s:1, /* supervisor */ - wt:4, /* write through */ - g:1, /* global */ - ci:1, /* cache inhibit */ - wp:1, /* write protect */ - v:1; /* valid */ - } field; -}; - -#define VV_EX_UNMOD 0 -#define VV_EX_MOD 1 -#define VV_SHARED_UNMOD 2 -#define VV_INVALID 3 - -#define D(UNION, LINE) \ - ((LINE) == 3 ? (UNION).field.d3 : \ - ((LINE) == 2 ? (UNION).field.d2 : \ - ((LINE) == 1 ? (UNION).field.d1 : \ - ((LINE) == 0 ? (UNION).field.d0 : ~0)))) -#define VV(UNION, LINE) \ - ((LINE) == 3 ? (UNION).field.vv3 : \ - ((LINE) == 2 ? (UNION).field.vv2 : \ - ((LINE) == 1 ? (UNION).field.vv1 : \ - ((LINE) == 0 ? (UNION).field.vv0 : ~0)))) - - -/* - * Show (for debugging) how the given CMMU translates the given ADDRESS. - * If cmmu == -1, the data cmmu for the current cpu is used. - */ -void cmmu_show_translation( - unsigned address, - unsigned supervisor_flag, - unsigned verbose_flag, - int cmmu_num) -{ - /* - * A virtual address is split into three fields. Two are used as - * indicies into tables (segment and page), and one is an offset into - * a page of memory. - */ - union { - unsigned bits; - struct { - unsigned segment_table_index:10, - page_table_index:10, - page_offset:12; - } field; - } virtual_address; - unsigned value; - - if (verbose_flag) - db_printf("-------------------------------------------\n"); - - - /****** ACCESS PROPER CMMU or THREAD ***********/ - if (thread != 0) - { - /* the following tidbit from _pmap_activate in m88k/pmap.c */ - register apr_template_t apr_data; - supervisor_flag = 0; /* thread implies user */ - - if (thread->task == 0) { - db_printf("[thread %x has empty task pointer]\n", thread); - return; - } else if (thread->task->map == 0) { - db_printf("[thread/task %x/%x has empty map pointer]\n", - thread, thread->task); - return; - } else if (thread->task->map->pmap == 0) { - db_printf("[thread/task/map %x/%x/%x has empty pmap pointer]\n", - thread, thread->task, thread->task->map); - return; - } - if (thread->task->map->pmap->lock.lock_data) { - db_printf("[Warning: thread %x's task %x's map %x's " - "pmap %x is locked]\n", thread, thread->task, - thread->task->map, thread->task->map->pmap); - } - apr_data.bits = 0; - apr_data.field.st_base = M88K_BTOP(thread->task->map->pmap->sdt_paddr); - apr_data.field.wt = 0; - apr_data.field.g = 1; - apr_data.field.ci = 0; - apr_data.field.te = 1; - value = apr_data.bits; - if (verbose_flag) { - db_printf("[thread %x task %x map %x pmap %x UAPR is %x]\n", - thread, thread->task, thread->task->map, - thread->task->map->pmap, value); - } - } else { - if (cmmu_num == -1) - { - if (cpu_cmmu[0].pair[DATA_CMMU] == 0) - { - db_printf("ack! can't figure my own data cmmu number.\n"); - return; - } - cmmu_num = cpu_cmmu[0].pair[DATA_CMMU] - cmmu; - if (verbose_flag) - db_printf("The data cmmu for cpu#%d is cmmu#%d.\n", - 0, cmmu_num); - } - else if (cmmu_num < 0 || cmmu_num >= MAX_CMMUS) - { - db_printf("invalid cpu number [%d]... must be in range [0..%d]\n", - cmmu_num, MAX_CMMUS - 1); - return; - } - - if (cmmu[cmmu_num].cmmu_alive == 0) - { - db_printf("warning: cmmu %d is not alive.\n", cmmu_num); - #if 0 - return; - #endif - } - - if (!verbose_flag) - { - if (!(cmmu[cmmu_num].cmmu_regs->sctr & CMMU_SCTR_SE)) - db_printf("WARNING: snooping not enabled for CMMU#%d.\n", - cmmu_num); - } - else - { - int i; - for (i=0; i<MAX_CMMUS; i++) - if ((i == cmmu_num || cmmu[i].cmmu_alive) && - (verbose_flag>1 || !(cmmu[i].cmmu_regs->sctr&CMMU_SCTR_SE))) - { - db_printf("CMMU#%d (cpu %d %s) snooping %s\n", i, - cmmu[i].cmmu_cpu, cmmu[i].which ? "data" : "inst", - (cmmu[i].cmmu_regs->sctr & CMMU_SCTR_SE) ? "on":"OFF"); - } - } - - if (supervisor_flag) - value = cmmu[cmmu_num].cmmu_regs->sapr; - else - value = cmmu[cmmu_num].cmmu_regs->uapr; - - } - - /******* LOOK AT THE BATC ** (if not a thread) **************/ - #if SHADOW_BATC - if (thread == 0) - { - int i; - union batcu batc; - for (i = 0; i < 8; i++) { - batc.bits = cmmu[cmmu_num].batc[i]; - if (batc.field.v == 0) { - if (verbose_flag>1) - db_printf("cmmu #%d batc[%d] invalid.\n", cmmu_num, i); - } else { - db_printf("cmmu#%d batc[%d] v%08x p%08x", cmmu_num, i, - batc.field.lba << 18, batc.field.pba); - if (batc.field.s) db_printf(", supervisor"); - if (batc.field.wt) db_printf(", wt.th"); - if (batc.field.g) db_printf(", global"); - if (batc.field.ci) db_printf(", cache inhibit"); - if (batc.field.wp) db_printf(", write protect"); - } - } - } - #endif - - /******* SEE WHAT A PROBE SAYS (if not a thread) ***********/ - if (thread == 0) - { - union ssr ssr; - struct cmmu_regs *cmmu_regs = cmmu[cmmu_num].cmmu_regs; - cmmu_regs->sar = address; - cmmu_regs->scr = supervisor_flag ? CMMU_PROBE_SUPER : CMMU_PROBE_USER; - ssr.bits = cmmu_regs->ssr; - if (verbose_flag > 1) - db_printf("probe of 0x%08x returns ssr=0x%08x\n", - address, ssr.bits); - if (ssr.field.v) - db_printf("PROBE of 0x%08x returns phys=0x%x", - address, cmmu_regs->sar); - else - db_printf("PROBE fault at 0x%x", cmmu_regs->pfADDRr); - if (ssr.field.ce) db_printf(", copyback err"); - if (ssr.field.be) db_printf(", bus err"); - if (ssr.field.wt) db_printf(", writethrough"); - if (ssr.field.sp) db_printf(", sup prot"); - if (ssr.field.g) db_printf(", global"); - if (ssr.field.ci) db_printf(", cache inhibit"); - if (ssr.field.m) db_printf(", modified"); - if (ssr.field.u) db_printf(", used"); - if (ssr.field.wp) db_printf(", write prot"); - if (ssr.field.bh) db_printf(", BATC"); - db_printf(".\n"); - } - - /******* INTERPRET AREA DESCRIPTOR *********/ - { - union apr_template apr_template; - apr_template.bits = value; - if (verbose_flag > 1) { - if (thread == 0) - db_printf("CMMU#%d", cmmu_num); - else - db_printf("THREAD %x", thread); - db_printf(" %cAPR is 0x%08x\n", - supervisor_flag ? 'S' : 'U', apr_template.bits); - } - if (thread == 0) - db_printf("CMMU#%d", cmmu_num); - else - db_printf("THREAD %x", thread); - db_printf(" %cAPR: SegTbl: 0x%x000p", - supervisor_flag ? 'S' : 'U', apr_template.field.st_base); - if (apr_template.field.wt) db_printf(", WTHRU"); - else db_printf(", !wthru"); - if (apr_template.field.g) db_printf(", GLOBAL"); - else db_printf(", !global"); - if (apr_template.field.ci) db_printf(", $INHIBIT"); - else db_printf(", $ok"); - if (apr_template.field.te) db_printf(", VALID"); - else db_printf(", !valid"); - db_printf(".\n"); - - /* if not valid, done now */ - if (apr_template.field.te == 0) { - db_printf("<would report an error, valid bit not set>\n"); - return; - } - - value = apr_template.field.st_base << 12; /* now point to seg page */ - } - - /* translate value from physical to virtual */ - if (verbose_flag) - db_printf("[%x physical is %x virtual]\n", value, value + VEQR_ADDR); - value += VEQR_ADDR; - - virtual_address.bits = address; - - /****** ACCESS SEGMENT TABLE AND INTERPRET SEGMENT DESCRIPTOR *******/ - { - union sdt_entry_template std_template; - if (verbose_flag) - db_printf("will follow to entry %d of page at 0x%x...\n", - virtual_address.field.segment_table_index, value); - value |= virtual_address.field.segment_table_index * - sizeof(struct sdt_entry); - - if (badwordaddr(value)) { - db_printf("ERROR: unable to access page at 0x%08x.\n", value); - return; - } - - std_template.bits = *(unsigned *)value; - if (verbose_flag > 1) - db_printf("SEG DESC @0x%x is 0x%08x\n", value, std_template.bits); - db_printf("SEG DESC @0x%x: PgTbl: 0x%x000", - value, std_template.sdt_desc.table_addr); - if (std_template.sdt_desc.wt) db_printf(", WTHRU"); - else db_printf(", !wthru"); - if (std_template.sdt_desc.sup) db_printf(", S-PROT"); - else db_printf(", UserOk"); - if (std_template.sdt_desc.g) db_printf(", GLOBAL"); - else db_printf(", !global"); - if (std_template.sdt_desc.no_cache) db_printf(", $INHIBIT"); - else db_printf(", $ok"); - if (std_template.sdt_desc.prot) db_printf(", W-PROT"); - else db_printf(", WriteOk"); - if (std_template.sdt_desc.dtype) db_printf(", VALID"); - else db_printf(", !valid"); - db_printf(".\n"); - - /* if not valid, done now */ - if (std_template.sdt_desc.dtype == 0) { - db_printf("<would report an error, STD entry not valid>\n"); - return; - } - - value = std_template.sdt_desc.table_addr << 12; - } - - /* translate value from physical to virtual */ - if (verbose_flag) - db_printf("[%x physical is %x virtual]\n", value, value + VEQR_ADDR); - value += VEQR_ADDR; - - /******* PAGE TABLE *********/ - { - union pte_template pte_template; - if (verbose_flag) - db_printf("will follow to entry %d of page at 0x%x...\n", - virtual_address.field.page_table_index, value); - value |= virtual_address.field.page_table_index * - sizeof(struct pt_entry); - - if (badwordaddr(value)) { - db_printf("error: unable to access page at 0x%08x.\n", value); - return; - } - - pte_template.bits = *(unsigned *)value; - if (verbose_flag > 1) - db_printf("PAGE DESC @0x%x is 0x%08x.\n", value, pte_template.bits); - db_printf("PAGE DESC @0x%x: page @%x000", - value, pte_template.pte.pfn); - if (pte_template.pte.wired) db_printf(", WIRE"); - else db_printf(", !wire"); - if (pte_template.pte.wt) db_printf(", WTHRU"); - else db_printf(", !wthru"); - if (pte_template.pte.sup) db_printf(", S-PROT"); - else db_printf(", UserOk"); - if (pte_template.pte.g) db_printf(", GLOBAL"); - else db_printf(", !global"); - if (pte_template.pte.ci) db_printf(", $INHIBIT"); - else db_printf(", $ok"); - if (pte_template.pte.modified) db_printf(", MOD"); - else db_printf(", !mod"); - if (pte_template.pte.pg_used) db_printf(", USED"); - else db_printf(", !used"); - if (pte_template.pte.prot) db_printf(", W-PROT"); - else db_printf(", WriteOk"); - if (pte_template.pte.dtype) db_printf(", VALID"); - else db_printf(", !valid"); - db_printf(".\n"); - - /* if not valid, done now */ - if (pte_template.pte.dtype == 0) { - db_printf("<would report an error, PTE entry not valid>\n"); - return; - } - - value = pte_template.pte.pfn << 12; - if (verbose_flag) - db_printf("will follow to byte %d of page at 0x%x...\n", - virtual_address.field.page_offset, value); - value |= virtual_address.field.page_offset; - - if (badwordaddr(value)) { - db_printf("error: unable to access page at 0x%08x.\n", value); - return; - } - } - - /* translate value from physical to virtual */ - if (verbose_flag) - db_printf("[%x physical is %x virtual]\n", value, value + VEQR_ADDR); - value += VEQR_ADDR; - - db_printf("WORD at 0x%x is 0x%08x.\n", value, *(unsigned *)value); -} - - -void cmmu_cache_state(unsigned addr, unsigned supervisor_flag) -{ - static char *vv_name[4] = - {"exclu-unmod", "exclu-mod", "shared-unmod", "invalid"}; - int cmmu_num; - for (cmmu_num = 0; cmmu_num < MAX_CMMUS; cmmu_num++) - { - union ssr ssr; - union cssp cssp; - struct cmmu_regs *R; - unsigned tag, line; - if (!cmmu[cmmu_num].cmmu_alive) - continue; - R = cmmu[cmmu_num].cmmu_regs; - db_printf("cmmu #%d %s cmmu for cpu %d.\n", cmmu_num, - cmmu[cmmu_num].which ? "data" : "inst", - cmmu[cmmu_num].cmmu_cpu); - R->sar = addr; - R->scr = supervisor_flag ? CMMU_PROBE_SUPER : CMMU_PROBE_USER; - - ssr.bits = R->ssr; - if (!ssr.field.v) { - db_printf("PROBE of 0x%08x faults.\n",addr); - continue; - } - db_printf("PROBE of 0x%08x returns phys=0x%x", addr, R->sar); - - tag = R->sar & ~0xfff; - cssp.bits = R->cssp; - - /* check to see if any of the tags for the set match the address */ - for (line = 0; line < 4; line++) - { - if (VV(cssp, line) == VV_INVALID) - { - db_printf("line %d invalid.\n", line); - continue; /* line is invalid */ - } - if (D(cssp, line)) - { - db_printf("line %d disabled.\n", line); - continue; /* line is disabled */ - } - - if ((R->ctp[line] & ~0xfff) != tag) - { - db_printf("line %d address tag is %x.\n", line, - (R->ctp[line] & ~0xfff)); - continue; - } - db_printf("found in line %d as %08x (%s).\n", - line, R->cdp[line], vv_name[VV(cssp, line)]); - } - } -} - -void show_cmmu_info(unsigned addr) -{ - int cmmu_num; - cmmu_cache_state(addr, 1); - - for (cmmu_num = 0; cmmu_num < MAX_CMMUS; cmmu_num++) - if (cmmu[cmmu_num].cmmu_alive) { - db_printf("cmmu #%d %s cmmu for cpu %d: ", cmmu_num, - cmmu[cmmu_num].which ? "data" : "inst", - cmmu[cmmu_num].cmmu_cpu); - cmmu_show_translation(addr, 1, 0, cmmu_num); - } -} -#endif /* end if DDB */ -#endif /* 0 */ diff --git a/sys/arch/mvme88k/mvme88k/conf.c b/sys/arch/mvme88k/mvme88k/conf.c deleted file mode 100644 index d7f4b269e20..00000000000 --- a/sys/arch/mvme88k/mvme88k/conf.c +++ /dev/null @@ -1,345 +0,0 @@ -/* $NetBSD: conf.c,v 1.28 1995/04/19 22:37:27 mycroft Exp $ */ - -/*- - * Copyright (c) 1991 The Regents of the University of California. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)conf.c 7.9 (Berkeley) 5/28/91 - */ - -#include <sys/param.h> -#include <sys/systm.h> -#include <sys/buf.h> -#include <sys/ioctl.h> -#include <sys/tty.h> -#include <sys/conf.h> -#include <sys/vnode.h> - -int ttselect __P((dev_t, int, struct proc *)); - -bdev_decl(sw); -#include "st.h" -bdev_decl(st); -#include "sd.h" -bdev_decl(sd); -#include "cd.h" -bdev_decl(cd); - -#if notyet -#include "ch.h" -bdev_decl(ch); -#include "xd.h" -bdev_decl(xd); -#endif /* notyet */ - -#include "vnd.h" -bdev_decl(vnd); - -struct bdevsw bdevsw[] = -{ - bdev_notdef(), /* 0 */ - bdev_notdef(), /* 1 */ - bdev_notdef(), /* 2 */ - bdev_swap_init(1,sw), /* 3: swap pseudo-device */ - bdev_disk_init(NSD,sd), /* 4: SCSI disk */ - bdev_tape_init(NST,st), /* 5: SCSI tape */ - bdev_disk_init(NCD,cd), /* 6: SCSI CD-ROM */ - bdev_notdef(), /* 7 */ - bdev_disk_init(NVND,vnd), /* 8: vnode disk driver */ - bdev_notdef(), /* 9 */ -#if notyet - bdev_disk_init(NXD,xd), /* 10: XD disk */ -#endif /* notyet */ - bdev_notdef(), /* 11 */ - bdev_notdef(), /* 12 */ - bdev_lkm_dummy(), /* 13 */ - bdev_lkm_dummy(), /* 14 */ - bdev_lkm_dummy(), /* 15 */ - bdev_lkm_dummy(), /* 16 */ - bdev_lkm_dummy(), /* 17 */ - bdev_lkm_dummy(), /* 18 */ -}; -int nblkdev = sizeof(bdevsw) / sizeof(bdevsw[0]); - -cdev_decl(cn); -cdev_decl(ctty); -#define mmread mmrw -#define mmwrite mmrw -#if notyet -cdev_decl(mm); -#endif /* notyet */ -cdev_decl(sw); - -#if notyet -#include "sram.h" -cdev_decl(sram); - -#include "vmel.h" -cdev_decl(vmel); - -#include "vmes.h" -cdev_decl(vmes); - -#include "nvram.h" -cdev_decl(nvram); - -#include "flash.h" -cdev_decl(flash); -#endif /* notyet */ - -#include "pty.h" -#define ptstty ptytty -#define ptsioctl ptyioctl -cdev_decl(pts); -#define ptctty ptytty -#define ptcioctl ptyioctl -cdev_decl(ptc); -cdev_decl(log); -cdev_decl(fd); - -#if notyet -#include "zs.h" -cdev_decl(zs); -#include "cl.h" -cdev_decl(cl); -#endif /* notyet */ - -#include "bugtty.h" -cdev_decl(bugtty); - -/* open, close, write, ioctl */ -#define cdev_lp_init(c,n) { \ - dev_init(c,n,open), dev_init(c,n,close), (dev_type_read((*))) enodev, \ - dev_init(c,n,write), dev_init(c,n,ioctl), (dev_type_stop((*))) enodev, \ - 0, seltrue, (dev_type_mmap((*))) enodev } - -/* open, close, ioctl, mmap, ioctl */ -#define cdev_mdev_init(c,n) { \ - dev_init(c,n,open), dev_init(c,n,close), dev_init(c,n,read), \ - dev_init(c,n,write), dev_init(c,n,ioctl), \ - (dev_type_stop((*))) enodev, 0, (dev_type_select((*))) enodev, \ - dev_init(c,n,mmap) } - -#if notyet -#include "lp.h" -cdev_decl(lp); -#include "lptwo.h" -cdev_decl(lptwo); -#endif /* notyet */ - -cdev_decl(st); -cdev_decl(sd); -cdev_decl(cd); -cdev_decl(xd); -cdev_decl(vnd); - -#include "bpfilter.h" -cdev_decl(bpf); - -#include "tun.h" -cdev_decl(tun); - -cdev_decl(random); - -#ifdef LKM -#define NLKM 1 -#else -#define NLKM 0 -#endif - -cdev_decl(lkm); - -struct cdevsw cdevsw[] = -{ - cdev_cn_init(1,cn), /* 0: virtual console */ - cdev_ctty_init(1,ctty), /* 1: controlling terminal */ -#if notyet - cdev_mm_init(1,mm), /* 2: /dev/{null,mem,kmem,...} */ -#endif /* notyet */ - cdev_swap_init(1,sw), /* 3: /dev/drum (swap pseudo-device) */ - cdev_tty_init(NPTY,pts), /* 4: pseudo-tty slave */ - cdev_ptc_init(NPTY,ptc), /* 5: pseudo-tty master */ - cdev_log_init(1,log), /* 6: /dev/klog */ -#if notyet - cdev_mdev_init(NSRAM,sram), /* 7: /dev/sramX */ -#endif /* notyet */ - cdev_disk_init(NSD,sd), /* 8: SCSI disk */ - cdev_disk_init(NCD,cd), /* 9: SCSI CD-ROM */ -#if notyet - cdev_mdev_init(NNVRAM,nvram), /* 10: /dev/nvramX */ - cdev_mdev_init(NFLASH,flash), /* 11: /dev/flashX */ - cdev_tty_init(NZS,zs), /* 12: SCC serial (tty[a-d]) */ - cdev_tty_init(NCL,cl), /* 13: CL-CD1400 serial (tty0[0-3]) */ -#endif /* notyet */ - cdev_tty_init(NBUGTTY,bugtty), /* 14: BUGtty (ttyB) */ - cdev_notdef(), /* 15 */ - cdev_notdef(), /* 16 */ - cdev_notdef(), /* 17: concatenated disk */ - cdev_notdef(), /* 18 */ - cdev_disk_init(NVND,vnd), /* 19: vnode disk */ - cdev_tape_init(NST,st), /* 20: SCSI tape */ - cdev_fd_init(1,fd), /* 21: file descriptor pseudo-dev */ - cdev_bpftun_init(NBPFILTER,bpf),/* 22: berkeley packet filter */ - cdev_bpftun_init(NTUN,tun), /* 23: network tunnel */ - cdev_lkm_init(NLKM,lkm), /* 24: loadable module driver */ - cdev_notdef(), /* 25 */ -#if notyet - cdev_disk_init(NXD,xd), /* 26: XD disk */ -#endif /* notyet */ - cdev_notdef(), /* 27 */ -#if notyet - cdev_lp_init(NLP,lp), /* 28: lp */ - cdev_lp_init(NLPTWO,lptwo), /* 29: lptwo */ -#endif /* notyet */ - cdev_notdef(), /* 30 */ -#if notyet - cdev_mdev_init(NVMEL,vmel), /* 31: /dev/vmelX */ - cdev_mdev_init(NVMES,vmes), /* 32: /dev/vmesX */ -#endif /* notyet */ - cdev_lkm_dummy(), /* 33 */ - cdev_lkm_dummy(), /* 34 */ - cdev_lkm_dummy(), /* 35 */ - cdev_lkm_dummy(), /* 36 */ - cdev_lkm_dummy(), /* 37 */ - cdev_lkm_dummy(), /* 38 */ - cdev_random_init(1,random), /* 39: random data source */ -}; -int nchrdev = sizeof(cdevsw) / sizeof(cdevsw[0]); - -int mem_no = 2; /* major device number of memory special file */ - -/* - * Swapdev is a fake device implemented - * in sw.c used only internally to get to swstrategy. - * It cannot be provided to the users, because the - * swstrategy routine munches the b_dev and b_blkno entries - * before calling the appropriate driver. This would horribly - * confuse, e.g. the hashing routines. Instead, /dev/drum is - * provided as a character (raw) device. - */ -dev_t swapdev = makedev(3, 0); - -/* - * Returns true if dev is /dev/mem or /dev/kmem. - */ -iskmemdev(dev) - dev_t dev; -{ - - return (major(dev) == mem_no && minor(dev) < 2); -} - -/* - * Returns true if dev is /dev/zero. - */ -iszerodev(dev) - dev_t dev; -{ - - return (major(dev) == mem_no && minor(dev) == 12); -} - -static int chrtoblktbl[] = { - /* XXXX This needs to be dynamic for LKMs. */ - /*VCHR*/ /*VBLK*/ - /* 0 */ NODEV, - /* 1 */ NODEV, - /* 2 */ NODEV, - /* 3 */ NODEV, - /* 4 */ NODEV, - /* 5 */ NODEV, - /* 6 */ NODEV, - /* 7 */ NODEV, - /* 8 */ 4, /* SCSI disk */ - /* 9 */ 6, /* SCSI CD-ROM */ - /* 10 */ NODEV, - /* 11 */ NODEV, - /* 12 */ NODEV, - /* 13 */ NODEV, - /* 14 */ NODEV, - /* 15 */ NODEV, - /* 16 */ NODEV, - /* 17 */ NODEV, - /* 18 */ NODEV, - /* 19 */ 8, /* vnode disk */ - /* 20 */ NODEV, - /* 21 */ NODEV, - /* 22 */ NODEV, - /* 23 */ NODEV, - /* 24 */ NODEV, - /* 25 */ NODEV, - /* 26 */ 10, /* XD disk */ -}; - -/* - * Convert a character device number to a block device number. - */ -chrtoblk(dev) - dev_t dev; -{ - int blkmaj; - - if (major(dev) >= nchrdev || - major(dev) >= sizeof(chrtoblktbl)/sizeof(chrtoblktbl[0])) - return (NODEV); - blkmaj = chrtoblktbl[major(dev)]; - if (blkmaj == NODEV) - return (NODEV); - return (makedev(blkmaj, minor(dev))); -} - -/* - * This entire table could be autoconfig()ed but that would mean that - * the kernel's idea of the console would be out of sync with that of - * the standalone boot. I think it best that they both use the same - * known algorithm unless we see a pressing need otherwise. - */ -#include <dev/cons.h> - -#define zscnpollc nullcnpollc -cons_decl(zs); -#define clcnpollc nullcnpollc -cons_decl(cl); -#define bugttycnpollc nullcnpollc -cons_decl(bugtty); - -struct consdev constab[] = { -#if NZS > 0 - cons_init(zs), -#endif -#if NCL > 0 - cons_init(cl), -#endif -#if NBUGTTY > 0 - cons_init(bugtty), -#endif - { 0 }, -}; diff --git a/sys/arch/mvme88k/mvme88k/continuation.s b/sys/arch/mvme88k/mvme88k/continuation.s deleted file mode 100644 index 4149ebd06d1..00000000000 --- a/sys/arch/mvme88k/mvme88k/continuation.s +++ /dev/null @@ -1,241 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1992 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* - * Assembler continuation support routines. - */ -/* - * HISTORY - * $Log: continuation.s,v $ - * Revision 1.1 1995/10/18 12:32:20 deraadt - * moved from m88k directory - * - * Revision 1.1.1.1 1995/10/18 10:54:27 deraadt - * initial 88k import; code by nivas and based on mach luna88k - * - * Revision 2.7 93/01/26 18:00:29 danner - * changed ;comments to C-style for cpp. - * [93/01/25 jfriedl] - * - * Revision 2.6 93/01/14 17:53:09 danner - * Enhanced debugger support for continuations. - * [92/12/02 jfriedl] - * - * Revision 2.5 92/08/03 17:51:54 jfriedl - * Adjusted references from luna88k/locore --> luna88k - * [92/07/24 jfriedl] - * - * Revision 2.4.1.1 92/05/27 14:48:42 danner - * Updated includes. - * PSR_INTERRUPT_DISABLE_BIT -> PSR_IND_LOG - * - * - * Revision 2.4 92/05/04 11:27:58 danner - * Support for gcc 2.x's moptimize-arg-area switch. Simplify - * Switch_context. - * [92/05/03 danner] - * Performed instruction reordering in Switch_context suggested by - * jfriedl. - * [92/04/26 danner] - * [92/04/12 16:24:48 danner] - * - * Thread_syscall_return now stores r2 into the pcb. This cannot be - * avoided due to asts. - * [92/04/12 danner] - * - * Revision 2.3 92/03/03 15:38:44 rpd - * Save continuation argument as old_thread->swap_func in - * Switch_context. - * [92/03/02 danner] - * - * Added missing stcr in interrupt disabling code. - * [92/03/02 danner] - * - * Revision 2.2 92/02/18 18:03:27 elf - * Created. - * [92/02/01 danner] - * - */ -#ifndef ASSEMBLER /* predefined by ascpp, at least */ -#define ASSEMBLER /* this is required for some of the include files */ -#endif - -#include <assym.s> /* for PCB_KSP, etc */ -#include <machine/asm.h> -#include <motorola/m88k/m88100/m88100.h> -#include <motorola/m88k/m88100/psl.h> -#include <mach/machine/vm_param.h> -#include <mach_kdb.h> - -/* - * Jump out into user space for the first time. - * No ast check. Reload registers from continuation, - * the jump out. - */ -ENTRY(thread_bootstrap_return) -/* - * Jump out to user space from an exception. Restore - * all registers. - * - */ -ENTRY(thread_exception_return) - ldcr r30, SR0 /* get current thread pointer */ - ld r30, r30, THREAD_PCB /* get the pcb pointer */ - br.n _return_from_exception - addu r30, r30, PCB_USER /* point to exception frame */ - -/* - * - * Return to user space from a system call. - * The value in r2 is the return value, and should be - * preserved. The other argument registers (r3-r9), as well as - * the temporary registers (r10-r13) need not be restored. - * R2 is saved into the pcb in case we get blocked by an ast. - */ -ENTRY(thread_syscall_return) - ldcr r30, SR0 /* get current thread pointer */ - ld r30, r30, THREAD_PCB /* get the pcb pointer */ - addu r30, r30, PCB_USER /* point to exception frame */ - br.n _return_from_syscall - st r2, r30, GENREG_OFF(2) /* save r2 */ - - -/* - * Call continuation - call the function specified (r2) with no - * arguments. Reset the stack point to the top of stack first. - * On the 88k, we leave the top 2 words of the stack availible - * to hold a pointer to the user exception frame. - */ -ENTRY(call_continuation) - /* reset the stack pointer to the top of stack. Since stacks - grow down, this can be accomplished by rounding up the sp - to the nearest KERNEL_STACK_SIZE quanta. We do this - carefully to make sure we have a valid stack pointer at - all times (in case we take an interrupt). - 32 bytes is also subtracted from the stack pointer to - allow compilation with gcc 2.x's -moptimize-arg-area - option - */ - or r3, r0, KERNEL_STACK_SIZE-1 - addu r30, r31, r3 /* nsp += KSS-1 */ - and.c r30, r30, r3 /* nsp &= ~(KSS-1) */ -#if MACH_KDB - or r1, r1, 1 /* mark "continuation" return */ -#endif - jmp.n r2 /* call continuation */ - subu r31, r30, (8+32) /* sp = nsp-8 */ - -/* - * Assembler support for switch context. The address space switch - * has already occured. - * - * On entry - * r2 - old thread (current_thread) - * r3 - continuation for old thread - * r4 - new thread - * r5 - &(old->pcb->kernel_state) - * r6 - &(new->pcb->kernel_state) - * - */ -ENTRY(Switch_context) - /* - * if a nonnull continuation, we can skip saving the - * current thread state - */ - bcnd ne0, r3, 1f /* non null continuation */ - /* null continuation; need to save registers */ - or r11, r0, r5 - /* save the relevant registers; r1, r14-r31 */ - st r1, r11,0 - st r14,r11,4 - st r15,r11,2*4 - st r16,r11,3*4 - st r17,r11,4*4 - st r18,r11,5*4 - st r19,r11,6*4 - st r20,r11,7*4 - st r21,r11,8*4 - st r22,r11,9*4 - st r23,r11,10*4 - st r24,r11,11*4 - st r25,r11,12*4 - /* In principle, registers 26-29 are never manipulated in the - kernel. Maybe we can skip saving them? */ - st r26,r11,13*4 - st r27,r11,14*4 - st r28,r11,15*4 - st r29,r11,16*4 - st r30,r11,17*4 /* save frame pointer */ - st r31,r11,18*4 /* save stack pointer */ - 1: - /* - Saved incoming thread registers, if necessary. - Reload new thread registers - */ - /* get pointer to new pcb */ - or r11, r0, r6 - /* switch stacks */ - ld r31,r11,18*4 - - /* - current_thread, active_threads and active_stacks have - all been updated in switch_context. We just switched - onto this threads stack, so all state is now consistent - again. Hence its safe to turn interrupts back on */ - - /* reenable interrupts */ - ldcr r10, PSR - clr r10, r10, 1<PSR_IND_LOG> - stcr r10, PSR - FLUSH_PIPELINE - - /* restore registers */ - ld r1, r11,0 - ld r14,r11,4 - ld r15,r11,2*4 - ld r16,r11,3*4 - ld r17,r11,4*4 - ld r18,r11,5*4 - ld r19,r11,6*4 - ld r20,r11,7*4 - ld r21,r11,8*4 - ld r22,r11,9*4 - ld r23,r11,10*4 - ld r24,r11,11*4 - ld r25,r11,12*4 - ld r26,r11,13*4 - ld r27,r11,14*4 - ld r28,r11,15*4 - ld r29,r11,16*4 - /* make the call - r2 is still old thread, which - * makes it the return value/first argument - * Sometimes this call will be actually be a return - * up to switch_context, and sometimes it will be - * an actual call to a function. Stare at Figure 4 - * of Draves, et al. SOSP paper for a few hours to really - * understand.... - */ - jmp.n r1 - ld r30,r11,17*4 diff --git a/sys/arch/mvme88k/mvme88k/eh.S b/sys/arch/mvme88k/mvme88k/eh.S deleted file mode 100644 index 280267ccc52..00000000000 --- a/sys/arch/mvme88k/mvme88k/eh.S +++ /dev/null @@ -1,1749 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ -/* - * HISTORY - * 1. Should get rid of SR0 reference for thread stuff. - * 2. Make up my mind what is _kstack. I think it - * should be p->p_addr+UPAGES. (p_addr - * is pointing to user struct and swapin is - * making sure it is updated) - * Whatever is _kstack, its usage in this file should be - * revisited. - */ - - /* - **************************************************************RCS****** - * - * ------------------------------------------------------------------- - * | In the following discussion, references are made to: | - * | MC88100 - RISC MICROPROCESSOR USER'S MANUAL | - * | (second edition). Reference in []s refer to section numbers. | - * | | - * | This discussion assumes that you are at least vaguely familiar | - * | with 88100 exception handling (chapter 6), the MACH kernel, and | - * | that you have a brain (and use it while reading this). | - * | | - * | I also assume (and hope) that you're not offended by | - * | frequent misspellings. | - * | | - * | Jeffrey Friedl | - * | jfriedl@rna.ncl.omron.co.jp | - * | December, 1989 | - * ------------------------------------------------------------------- - * - * EXCEPTIONS, INTERRUPTS, and TRAPS - * --------------------------------- - * This is the machine exception handler. - * In the MC88100, various "conditions" cause an exception, where - * processing momentarily jumps here to "service" the exception, - * and then continues where it left off. - * - * There are a number of different types of exceptions. - * For example, exception #6 is the privilege violation exception which - * is raised when the user tries to execute a supervisor-only instruction. - * - * Exception #1 is the interrupt exception, and is raised when an - * outside device raises the INT line on the CPU. This happens, - * for example, when the clock signals that it is time for a context - * switch, or perhaps the disk drive signaling that some operation - * is complete. - * - * Traps are also exceptions. Traps are ways for user programs to request - * kernel operations. For example, "tcnd eq0, r0, 128" will raise - * exception 128, the system call exception. - * - * - * SERVICING AN EXCEPTION - * ----------------------- - * When an exception occurs, each control register is saved in its - * respective shadow register and execution continues from the - * appropriate exception handler. The exception handler must - * - save the context from the time of the exception - * - service the exception - * - restore the context (registers, etc) - * - pick up from where the exception occurred. - * - * The context is saved on a stack. Actually, in the user_state area - * in the PCB if the exception happens in user mode. - * - * Servicing the exception is usually straightforward and in fact not dealt - * with very much here. Usually a C routine is called to handle it. - * For example, when a privilege exception is raised, the routine that sends - * an "illegal instruction" signal to the offending process is called. - * - * When the exception has been serviced, the context is restored from the - * stack and execution resumes from where it left off. - * - * In more detail: - * - * Saving the exception-time context. - * --------------------------------- - * In saving the exception-time context, we copy the shadow and general - * purpose registers to memory. Since one exception may occur while - * servicing another, the memory used to save the exception-time context may - * not be static (i.e. the same every time). Thus, memory on a stack is set - * aside for the exception frame (area where the exception-time context is - * saved). The same stack is also used when C routines are called (to - * service the exception). - * - * Each process has a stack in kernel space (called the "kernel stack", - * short for "process's kernel stack) as well as the user space stack. When - * entering the kernel from user space, the kernel stack is unused. On this - * stack we save the exception state and (most likely call a C routine to) - * service the exception. - * - * Before servicing an exception, several issues must be addressed. - * - * 1) When an interrupt is recognized by the hardware, the data pipeline is - * allowed to clear. However, if one of these data accesses faults (bad - * reference, or a reference to a page which needs to be swapped in), that - * reference, as well as any others in the pipeline at the time (at most - * three total) are left there, to be taken care of by the exception - * handler [6.4.1]. This involves swapping in the proper page and - * manually doing the appropriate load or store. - * - * The other (at most, two other) data accesses that might have been in - * the pipeline must also be manually completed (even though they may not - * be at fault [yes, that's a bad pun, thank you]). - * - * 2) If any of the (at most three) uncompleted data access in the pipeline - * are loads (from memory to a register), then the bit for the destination - * register is set in the SSBR. Since the hardware will never complete - * that load (since we do it manually), the hardware will never clear that - * SSBR bit. Thus, we must clear it manually. If this isn't done, the - * system will hang waiting for a bit to clear that will never. - * - * 3) If the exception is the privilege violation exception, the bounds - * violation exception, or the misaligned access exception, the - * destination register bit in the SSBR may need to be cleared. - * - * 4) If the exception is one of the floating exceptions, then the - * destination register for that floating process won't be written, - * and the SSBR must be cleared explicitly. - * - * 5) The FPU must be enabled (as it is disabled by the exception processing - * hardware) and allowed to complete actions in progress. This is so - * so that it may be used in the servicing of any instruction. - * When the FPU is being restarted, operations attempting to complete - * may themselves fault (raising another exception). - * - * More on Restarting the FPU - * -------------------------- - * The manual [section 6.4.3.4] gives only minor mention to this - * rather complex task. Before the FPU is restarted all SSBR bits are - * cleared for actions that the exception handler completes (as mentioned - * above) so that the SSBR is clear unless there are FPU operations that - * have not actually been completed (and hence not written to the registers). - * Also, all control registers (at least all those that we care about) are - * saved to the stack exception frame before the FPU is restarted (this - * is important... the reason comes later). - * - * The FPU is restarted by doing an rte to a trap-not-taken (the rte - * actually enables the fpu because we ensure that the EPSR has the - * FPU-enable bit on; the trap-not-taken ensures anything in the FPU - * completes by waiting until scoreboard register is clear). - * - * At the time the FPU is restarted (the rte to the trap-not-taken) the FPU - * can write to ANY of the general registers. Thus, we must make sure that - * all general registers (r1..r31) are in their pre-exception state so that - * when saved to the exception frame after the FPU is enabled, they properly - * reflect any changes made by the FPU in being restarted. - * - * Because we can't save the pointer to the exception frame in a general - * register during the FPU restart (it could get overwritten by the FPU!), - * we save it in a control register, SR3, during the restart. - * - * - * HOWEVER ..... - * - * Because other uncompleted actions in the FPU may fault when the FPU is - * restarted, a new exception may be raised during the restart. This may - * happen recursively a number of times. Thus, during a restart, ANY register - * whatsoever may be modified, including control registers. Because of this - * we must make sure that the exception handler preserves SR3 throughout - * servicing an exception so that, if the exception had been raised during - * an FPU restart, it is returned unmolested when control returns to the FPU - * restart. - * - * Thus: if an exception is from kernel space, we MUST preserve SR3. - * (if it from user space, no FPU-enable can be in progress and SR3 is - * unimportant). - * - * Now is a good time to recap SR0..SR3 usage: - * SR0 - - * SR1 - CPU flags (exception handler flags) - * SR2 - generally free - * SR3 - free only if the exception is from user mode - * - * Once the FPU has been restarted, the general registers are saved to the - * exception frame. If the exception is not the interrupt exception, - * interrupts are enabled and any faulted data accesses (see above) are - * serviced. In either case, the exception is then serviced (usually by - * calling a C routine). After servicing, any faulted data accesses are - * serviced (if it had been the interrupt exception). The context is then - * restored and control returns to where the exception occurred. - * - */ - -#ifndef ASSEMBLER /* predefined by ascpp, at least */ -#define ASSEMBLER /* this is required for some of the include files */ -#endif - -#include <assym.s> /* for PCB_KSP, etc */ -#include <machine/trap.h> /* for T_ defines */ -#include <machine/locore.h> /* lots of stuff */ -#include <machine/asm.h> - -#ifndef PCB_USER -#define PCB_USER 0 -#endif -#ifndef NBPG -#define NBPG 4096 -#endif /* NBPG */ -#ifndef USIZE -#define USIZE (UPAGES * NBPG) -#endif /* USIZE */ - -/* - * The exception frame as defined in "luna/m88k.h" (among other places) is - * a bit outdated and needs to be changed. Until then, we'll define some - * pseudo-fields there for our needs. - * - * EF_SR3 A place to save the exception-time SR3 from just after the - * time when an exception is raised until just after the FPU - * has been restarted. This does not necessarly conflict with - * the general registers (though it can if you're not careful) - * and so we can use a spot later used to save a general register. - * - * EF_FLAGS This is just the old EF_MODE. "EF_MODE" isn't a very good name. - */ -#define EF_SR3 (EF_R0 + 5) -#define EF_FLAGS EF_MODE - -#define FLAG_FROM_KERNEL 8 /* this should be in locore.h */ - - text - align 8 - -/*************************************************************************** - *************************************************************************** - ** - ** #define PREP(NAME, NUM, BIT, SSBR_STUFF, FLAG_CHECK) - ** - ** This is the "exception processing preparaton" common to all exception - ** processing. It is used in the following manor: - ** - ** LABEL(foo_handler) - ** PREP("foo", 11, DEBUG_FOO_BIT, No_SSBR_Stuff, No_Precheck) - ** CALL(_trap, T_FOO_FAULT, r31) - ** DONE(DEBUG_FOO_BIT) - ** - ** This defines the exception handler for the "foo" exception. - ** The arguments ro PREP(): - ** NAME - String for debugging (more info later) - ** NUM - The exception number [see the manual, Table 6-1] - ** BIT - Bit to check in eh_debug for debugging (more info later) - ** SSBR_STUFF - - ** If the exception might leave some bits in the SSBR set, - ** this should indicate how they are cleared. - ** FLAG_PRECHECK - - ** This is for the data access exception only. See it for - ** more info. - ** - ** - ** What's in between PREP() and DONE() (usually a CALL) is the actual - ** servicing of the interrupt. During this time, any register may - ** be used freely as they've all been saved in the exception frame - ** (which is pointed-to by r31). - **/ -#define PREP(NAME, NUM, BIT, SSBR_STUFF, FLAG_PRECHECK) NEWLINE \ - xcr FLAGS, FLAGS, SR1 NEWLINE \ - FLAG_PRECHECK NEWLINE \ - NEWLINE \ - /* the bsr later clobbers r1, so save now */ NEWLINE \ - stcr r1, SR2 /* r1 now free */ NEWLINE \ - NEWLINE \ - /* set or clear the FLAG_FROM_KERNEL bit */ NEWLINE \ - ldcr r1, EPSR NEWLINE \ - bb0.n PSR_SUPERVISOR_MODE_BIT, r1, 1f NEWLINE \ - clr FLAGS, FLAGS, 1<FLAG_FROM_KERNEL> NEWLINE \ - set FLAGS, FLAGS, 1<FLAG_FROM_KERNEL> NEWLINE \ - NEWLINE \ - /* get a stack (exception frame) */ NEWLINE \ - 1: bsr setup_phase_one NEWLINE \ - NEWLINE \ - /* TMP2 now free -- use to set EF_VECTOR */ NEWLINE \ - or TMP2, r0, NUM NEWLINE \ - st TMP2, r31, REG_OFF(EF_VECTOR) NEWLINE \ - NEWLINE \ - /* Clear any bits in the SSBR (held in TMP) */ NEWLINE \ - /* SSBR_STUFF may be empty, though. */ NEWLINE \ - SSBR_STUFF NEWLINE \ - NEWLINE \ - /* call setup_phase_two to restart the FPU */ NEWLINE \ - /* and to save all general registers. */ NEWLINE \ - bsr setup_phase_two NEWLINE \ - NEWLINE \ - /* All general regs free -- do any debugging */ NEWLINE \ - PREP_DEBUG(BIT, NAME) - -#undef EH_DEBUG -#define EH_DEBUG 1 - -/* Some defines for use with PREP() */ -#define No_SSBR_Stuff /* empty */ -#define Clear_SSBR_Dest bsr clear_dest_ssbr_bit -#define No_Precheck /* empty */ -#define Data_Precheck \ - bb1.n FLAG_IGNORE_DATA_EXCEPTION, FLAGS, ignore_data_exception - -#if EH_DEBUG - /* - * If we allow debugging, there is a variable "eh_debug" - * in which there is a bit for each exception. If the bit - * is set for an exception, debugging information is printed - * about that exception whenever it occurs. - * - * The bits are defined in "locore.h" - */ -/* LABEL(_eh_debug) word 0x00000000 */ - LABEL(_eh_debug) word 0xFFFFFFFF - - /* - * additional pre-servicing preparation to be done when - * debugging... check eh_debug and make the call if - * need be. - */ - #define PREP_DEBUG(DebugNumber, Name) \ - or.u r2, r0, hi16(_eh_debug) NEWLINE \ - ld r3, r2, lo16(_eh_debug) NEWLINE \ - bb0 DebugNumber, r3, 4f NEWLINE \ - /* call MY_info(ef,thread,flags,kind)*/ NEWLINE \ - or r2, r30, r0 NEWLINE \ - ldcr r3, SR0 NEWLINE \ - ldcr r4, SR1 NEWLINE \ - or.u r5, r0, hi16(2f) NEWLINE \ - or r5, r5, lo16(2f) NEWLINE \ - bsr.n _MY_info NEWLINE \ - subu r31, r31, 40 NEWLINE \ - br.n 4f NEWLINE \ - addu r31, r31, 40 NEWLINE \ - data NEWLINE \ - 2: string Name NEWLINE \ - byte 0 NEWLINE \ - align 4 NEWLINE \ - text NEWLINE \ - 4: - - - /* - * Post-servicing work to be done. - * When debugging, check "eh_debug" and call the - * debug routined if neeed be. - * - * Then, return from the interrupt handler. - */ - #define DONE(DebugNumber) \ - or.u r2, r0, hi16(_eh_debug) NEWLINE \ - ld r3, r2, lo16(_eh_debug) NEWLINE \ - bb0 DebugNumber, r3, 2f NEWLINE \ - ldcr r4, SR1 NEWLINE \ - CALL(_MY_info_done, r31, r4) NEWLINE \ - 2: br return_from_exception_handler -#else - /* - * If not debugging, then no debug-prep to do. - * Also, when you're done, you're done! (no debug check). - */ - #define PREP_DEBUG(bit, name) - #define DONE(num) br return_from_exception_handler -#endif - - -/*#########################################################################*/ -/*#### THE ACTUAL EXCEPTION HANDLER ENTRY POINTS ##########################*/ -/*#########################################################################*/ - -/* unknown exception handler */ -LABEL(unknown_handler) - PREP("unknown", 0, DEBUG_UNKNOWN_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_UNKNOWNFLT, r30) - DONE(DEBUG_UNKNOWN_BIT) - -/* interrupt exception handler */ -LABEL(interrupt_handler) - PREP("interrupt", 1, DEBUG_INTERRUPT_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_ext_int, 1, r30) - DONE(DEBUG_INTERRUPT_BIT) - -/* instruction access exception handler */ -LABEL(instruction_access_handler) - PREP("inst", 2, DEBUG_INSTRUCTION_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_INSTFLT, r30) -#if 0 - /* done in trap now */ - /* - * Now, to retry the instruction. - * Copy the SNIP to the SFIP, clearing the E bit. - * Copy the SXIP to the SNIP, clearing the E bit. - */ - ld r1, r30, REG_OFF(EF_SNIP) - ld r2, r30, REG_OFF(EF_SXIP) - clr r1, r1, 1<RTE_ERROR_BIT> - clr r2, r2, 1<RTE_ERROR_BIT> - st r1, r30, REG_OFF(EF_SFIP) - st r2, r30, REG_OFF(EF_SNIP) -#endif /* 0 */ - DONE(DEBUG_INSTRUCTION_BIT) - -/* - * data access exception handler -- - * See badaddr() below for info about Data_Precheck. - */ -LABEL(data_exception_handler) - PREP("data", 3, DEBUG_DATA_BIT, No_SSBR_Stuff, Data_Precheck) - DONE(DEBUG_DATA_BIT) - -/* misaligned access exception handler */ -LABEL(misaligned_handler) - PREP("misalign", 4, DEBUG_MISALIGN_BIT, Clear_SSBR_Dest, No_Precheck) - CALL(_trap, T_MISALGNFLT, r30) - DONE(DEBUG_MISALIGN_BIT) - -/* unimplemented opcode exception handler */ -LABEL(unimplemented_handler) - PREP("unimp", 5, DEBUG_UNIMPLEMENTED_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_ILLFLT, r30) - DONE(DEBUG_UNIMPLEMENTED_BIT) - -/* - * Some versions of the chip have * a bug whereby false privilege - * violation exceptions are raised. If the valid bit in the SXIP is clear, - * it is false. If so, just return. The code before PREP handles this.... - */ -LABEL(privilege_handler) - stcr r1, SR2 /* hold r1 for a moment */ - ldcr r1, SXIP /* look at the sxip... valid bit set? */ - bb1.n RTE_VALID_BIT, r1, 1f /*skip over return if a valid exception*/ - ldcr r1, SR2 /* restore r1 */ - RTE - 1: PREP("privilege", 6, DEBUG_PRIVILEGE_BIT, Clear_SSBR_Dest, No_Precheck) - CALL(_trap, T_PRIVINFLT, r30) - DONE(DEBUG_PRIVILEGE_BIT) - -/* - * I'm not sure what the trap(T_BNDFLT,...) does, but it doesn't send - * a signal to the process... - */ -LABEL(bounds_handler) - PREP("bounds", 7, DEBUG_BOUNDS_BIT, Clear_SSBR_Dest, No_Precheck) - CALL(_trap, T_BNDFLT, r30) - DONE(DEBUG_BOUNDS_BIT) - -/* integer divide-by-zero exception handler */ -LABEL(divide_handler) - PREP("divide", 8, DEBUG_DIVIDE_BIT, Clear_SSBR_Dest, No_Precheck) - CALL(_trap, T_ZERODIV, r30) - DONE(DEBUG_DIVIDE_BIT) - -/* integer overflow exception handelr */ -LABEL(overflow_handler) - PREP("overflow", 9, DEBUG_OVERFLOW_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_OVFFLT, r30) - DONE(DEBUG_OVERFLOW_BIT) - -/* Floating-point precise handler */ -#define FPp_SSBR_STUFF bsr clear_FPp_ssbr_bit -LABEL(fp_precise_handler) - PREP("FPU precise", 114, DEBUG_FPp_BIT, FPp_SSBR_STUFF, No_Precheck) - CALL(_Xfp_precise, r0, r30) /* call fp_precise(??, exception_frame)*/ - DONE(DEBUG_FPp_BIT) - -/* Floating-point imprecise handler */ -#define FPi_SSBR_STUFF bsr clear_FPi_ssbr_bit -LABEL(fp_imprecise_handler) - PREP("FPU imprecise", 115, DEBUG_FPi_BIT, FPi_SSBR_STUFF, No_Precheck) - CALL(_Xfp_imprecise, r0, r30) /*call fp_imprecise(??,exception_frame)*/ - DONE(DEBUG_FPi_BIT) - -/* All standard system calls. */ -LABEL(syscall_handler) - PREP("syscall", 128, DEBUG_SYSCALL_BIT, No_SSBR_Stuff, No_Precheck) - ld r13, r30, GENREG_OFF(13) - CALL(_syscall, r13, r30) /* system call no. is in r13 */ - DONE(DEBUG_SYSCALL_BIT) - -/* trap 496 comes here */ -LABEL(_bugtrap) - PREP("bugsyscall", 496, DEBUG_BUGCALL_BIT, No_SSBR_Stuff, No_Precheck) - ld r9, r30, GENREG_OFF(9) - CALL(_bugsyscall, r9, r30) /* system call no. is in r9 */ - DONE(DEBUG_SYSCALL_BIT) - -LABEL(_sigsys) - PREP("sigsys", 0, DEBUG_SIGSYS_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_SIGSYS, r30) - DONE(DEBUG_SIGSYS_BIT) - -LABEL(_sigtrap) - PREP("sigtrap", 0, DEBUG_SIGTRAP_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_SIGTRAP, r30) - DONE(DEBUG_SIGTRAP_BIT) - -LABEL(_stepbpt) - PREP("sigtrap", 0, DEBUG_SIGTRAP_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_STEPBPT, r30) - DONE(DEBUG_SIGTRAP_BIT) - -LABEL(_userbpt) - PREP("sigtrap", 0, DEBUG_SIGTRAP_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_USERBPT, r30) - DONE(DEBUG_SIGTRAP_BIT) - -#if DDB - LABEL(break) - PREP("break", 130, DEBUG_BREAK_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_KDB_BREAK, r30) - DONE(DEBUG_BREAK_BIT) - LABEL(trace) - PREP("trace", 131, DEBUG_TRACE_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_KDB_TRACE, r30) - DONE(DEBUG_TRACE_BIT) - LABEL(entry) - PREP("kdb", 132, DEBUG_KDB_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_KDB_ENTRY, r30) - DONE(DEBUG_KDB_BIT) -#else /* else not DDB */ - LABEL(break) - PREP("break", 130, DEBUG_BREAK_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_UNKNOWNFLT, r30) - DONE(DEBUG_BREAK_BIT) - LABEL(trace) - PREP("trace", 131, DEBUG_TRACE_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_UNKNOWNFLT, r30) - DONE(DEBUG_TRACE_BIT) - LABEL(entry) - PREP("unknown", 132, DEBUG_UNKNOWN_BIT, No_SSBR_Stuff, No_Precheck) - CALL(_trap, T_UNKNOWNFLT, r30) - DONE(DEBUG_KDB_BIT) -#endif /* DDB */ - - -/*--------------------------------------------------------------------------*/ - -/* - * The error exception handler. - * The error exception is raised when any other non-trap exception is raised - * while shadowing is off. This is Bad News. - * - * The shadow registers are not valid in this case (shadowing was off, ne). - * R1-R31 may be interesting though, so we'll save them. - * - * We'll not worry about trashing r26-29 here, - * since they aren't generally used. - */ -LABEL(error_handler) - /* pick up the slavestack */ - or r26, r0, r31 /* save old stack */ - or.u r31, r0, hi16(_intstack_end) - or r31, r31, lo16(_intstack_end) - - /* zero the stack, so we'll know what we're lookin' at */ - or.u r27, r0, hi16(_intstack) - or r27, r27, lo16(_intstack) - 1: cmp r28, r27, r31 - bb1 ge, r28, 2f /* branch if at the end of the stack */ - st r0, r0, r27 - br.n 1b - addu r28, r27, 4 /* bump up */ - 2: /* stack has been cleared */ - - /* ensure that stack is 8-byte aligned */ - clr r31, r31, 3<0> /* round down to 8-byte boundary */ - - /* create exception frame on stack */ - subu r31, r31, SIZEOF_EF /* r31 now our E.F. */ - - /* save old R31 and other R registers */ - st.d r0 , r31, GENREG_OFF(0) - st.d r2 , r31, GENREG_OFF(2) - st.d r4 , r31, GENREG_OFF(4) - st.d r6 , r31, GENREG_OFF(6) - st.d r8 , r31, GENREG_OFF(8) - st.d r10, r31, GENREG_OFF(10) - st.d r12, r31, GENREG_OFF(12) - st.d r14, r31, GENREG_OFF(14) - st.d r16, r31, GENREG_OFF(16) - st.d r18, r31, GENREG_OFF(18) - st.d r20, r31, GENREG_OFF(20) - st.d r22, r31, GENREG_OFF(22) - st.d r24, r31, GENREG_OFF(24) - st r30, r31, GENREG_OFF(30) - st r26, r31, GENREG_OFF(31) - - /* save shadow registers (are OLD, though) */ - ldcr r10, SXIP - st r10, r31, REG_OFF(EF_SXIP) - ldcr r10, SFIP - st r10, r31, REG_OFF(EF_SFIP) - ldcr r10, SNIP - st r10, r31, REG_OFF(EF_SNIP) - ldcr r10, SSBR - st r10, r31, REG_OFF(EF_SSBR) - ldcr r10, EPSR - st r10, r31, REG_OFF(EF_EPSR) - - ldcr r10, DMT0 - st r10, r31, REG_OFF(EF_DMT0) - ldcr r11, DMD0 - st r11, r31, REG_OFF(EF_DMD0) - ldcr r12, DMA0 - st r12, r31, REG_OFF(EF_DMA0) - - ldcr r10, DMT1 - st r10, r31, REG_OFF(EF_DMT1) - ldcr r11, DMD1 - st r11, r31, REG_OFF(EF_DMD1) - ldcr r12, DMA1 - st r12, r31, REG_OFF(EF_DMA1) - - ldcr r10, DMT2 - st r10, r31, REG_OFF(EF_DMT2) - ldcr r11, DMD2 - st r11, r31, REG_OFF(EF_DMD2) - ldcr r12, DMA2 - st r12, r31, REG_OFF(EF_DMA2) - - ldcr r10, SR1 - st r10, r31, REG_OFF(EF_MODE) - - /* shove sr2 into EF_FPLS1 */ - ldcr r10, SR2 - st r10, r31, REG_OFF(EF_FPLS1) - - /* shove sr3 into EF_FPHS2 */ - ldcr r10, SR3 - st r10, r31, REG_OFF(EF_FPHS2) - - /* error vector is zippo numero el'zeroooo */ - st r0, r31, REG_OFF(EF_VECTOR) - - stcr r0, SSBR /* won't want shadow bits bothering us later */ - - /* - * Cheap way to enable FPU and start shadowing again. - */ - ldcr r10, PSR - clr r10, r10, 1<PSR_FPU_DISABLE_BIT> /* enable the FPU */ - clr r10, r10, 1<PSR_SHADOW_FREEZE_BIT> /* also enable shadowing */ - - stcr r10, PSR /* bang */ - FLUSH_PIPELINE - - /* put pointer to regs into r30... r31 will become a simple stack */ - or r30, r31, r0 - - subu r31, r31, 0x10 /* make some breathing space */ - st r30, r31, 0x0c /* store frame pointer on the st */ - st r30, r31, 0x08 /* store again for the debugger to recognize */ - or.u r20, r0, hi16(0x87654321) - or r20, r20, lo16(0x87654321) - st r20, r31, 0x04 - st r20, r31, 0x00 - - CALL(_error_fault, r30, r30) - - /* TURN INTERUPTS back on */ - ldcr r1, PSR - clr r1, r1, 1<PSR_INTERRUPT_DISABLE_BIT> - stcr r1, PSR - FLUSH_PIPELINE -LABEL(_error_loop) bsr _error_loop - /* never returns*/ - -/* - *---------------------------------------------------------------------------- - *---------------------------------------------------------------------------- - *---------------------------------------------------------------------------- - */ - - -/* - * This is part of baddadr (below). - */ -_LABEL(ignore_data_exception) - /******************************************************\ - * SR0: pointer to the current thread structure * - * SR1: previous FLAGS reg * - * SR2: free * - * SR3: must presere * - * FLAGS: CPU status flags * - \******************************************************/ - xcr FLAGS, FLAGS, SR1 /* replace SR1, FLAGS */ - - /* - * For more info, see badaddr() below. - * - * We just want to jump to "badaddr__return_nonzero" below. - * - * We don't worry about trashing R2 here because we're - * jumping back to the function badaddr() where we're allowd - * to blast r2..r9 as we see fit. - */ - - /* the "+2" below is to set the VALID bit. */ - or.u r2, r0, hi16(badaddr__return_nonzero + 2) - or r2, r2, lo16(badaddr__return_nonzero + 2) - stcr r2, SNIP /* Make it the next instruction to execute */ - addu r2, r2, 4 - stcr r2, SFIP /* and the next one after that, too. */ - stcr r0, SSBR /* make the scoreboard happy. */ - - /* the following jumps to "badaddr__return_nonzero" in below */ - RTE - -/* - * extern boolean_t badaddr(unsigned addr, unsigned len) - * - * Returns true (non-zero) if the given LEN bytes starting at ADDR are - * not all currently accessable by the kernel. - * - * If all LEN bytes starting at ADDR are accessable, zero is returned. - * - * Len may be be 1, 2, or 4. - * - * This is implementd by setting a special flag in SR1 before trying to access - * the given address. If a data access exception is raised, the address - * is inaccessable. The exception handler will notice the special CPU flag - * and not try to swap the address in. Rather, it will return to - * "badaddr__return_nonzero" in this routine so that we may return non-zero - * to the calling routine. - * - * If no fault is raised, we continue to where we return zero to the calling - * routine (after removing the special CPU flag). - */ - -LABEL(_badaddr) - /* - * Disable interrupts ... don't want a context switch while we're - * doing this! Also, save the old PSR in R8 to restore later. - */ - ldcr r8, PSR - set r4, r8, 1<PSR_INTERRUPT_DISABLE_BIT> - FLUSH_PIPELINE - stcr r4, PSR - - ldcr r5, SR1 - set r5, r5, 1<FLAG_IGNORE_DATA_EXCEPTION> - /* resetting r5 to SR1 done in the delay slot below. */ - - /* - * If it's a word we're doing, do that here. Otherwise, - * see if it's a halfword..... - */ - sub r6, r3, 4 - bcnd.n ne0, r6, badaddr__maybe_halfword - stcr r5, SR1 - FLUSH_PIPELINE - - /* - * It's a bad address if it's misaligned. - */ - bb1 0, r2, badaddr__return_nonzero - bb1 1, r2, badaddr__return_nonzero - /* - * The next line will either fault or not. If it faults, execution - * will go to: data_access_handler (see above) - * and then to: ignore_data_exception (see above) - * and then to: badaddr__return_nonzero (see below) - * which will return to the calling function. - * - * If there is no fault, execution just continues as normal. - */ - ld r5, r2, 0 - FLUSH_PIPELINE - br.n badaddr__return - or r2, r0, r0 /* indicate a zero (address not bad) return.*/ - - badaddr__maybe_halfword: - /* More or less like the code for checking a word above */ - sub r6, r3, 2 - bcnd ne0, r6, badaddr__maybe_byte - - /* it's bad if it's misaligned */ - bb1 0, r2, badaddr__return_nonzero - - FLUSH_PIPELINE - ld.h r5, r2, 0 - FLUSH_PIPELINE - br.n badaddr__return - or r2, r0, r0 - - badaddr__maybe_byte: - /* More or less like the code for checking a word above */ - sub r6, r3, 1 - bcnd ne0, r6, badaddr__unknown_size - FLUSH_PIPELINE - ld.b r5, r2, 0 - FLUSH_PIPELINE - br.n badaddr__return - or r2, r0, r0 - badaddr__unknown_size: -#ifndef NDEBUG - data - 1: string "bad length (%d) to badaddr() from 0x%x\n\000" - text - or.u r2, r0, hi16(1b) - or r2, r2, lo16(1b) - or r4, r0, r1 - bsr _printf - or.u r2, r0, hi16(1b) - or r2, r2, lo16(1b) - bsr _panic - /*NOTREACHED*/ -#endif - -_LABEL(badaddr__return_nonzero) - or r2, r0, 1 - /* fall through to badaddr__return */ - -_LABEL(badaddr__return) - ldcr r4, SR1 - clr r4, r4, 1<FLAG_IGNORE_DATA_EXCEPTION> - stcr r4, SR1 - - /* - * Restore the PSR to what it was before. - * The only difference is that we might be enabling interrupts - * (which we turned off above). If interrupts were already off, - * we do not want to turn them on now, so we just restore from - * where we saved it. - */ - FLUSH_PIPELINE - stcr r8, PSR - jmp r1 - - -/* -****************************************************************************** -****************************************************************************** -****************************************************************************** -*/ - - -LABEL(setup_phase_one) - /***************** REGISTER STATUS BLOCK ***********************\ - * SR0: current thread (if any, null if not) * - * SR1: saved copy of exception-time register now holding FLAGS * - * SR2: saved copy of exception-time r1 * - * SR3: must be preserved .. may be the exception-time stack * - * r1: return address to calling exception handler * - * FLAGS: CPU status flags * - *************************************************** * - * immediate goal: * - * Decide where we're going to put the exception frame. * - * Might be at the end of R31, SR3, or the thread's * - * pcb. * - \***************************************************************/ - - /* Check if we are coming in from a FPU restart exception. - If so, the pcb will be in SR3 */ - bb1.n FLAG_ENABLING_FPU, FLAGS, use_SR3_pcb - xcr r1, r1, SR2 - /* are we coming in from user mode? If so, pick up thread pcb */ - bb0 FLAG_FROM_KERNEL, FLAGS, pickup_stack - - /* Interrupt in kernel mode, not FPU restart */ - _LABEL(already_on_kernel_stack) - /***************** REGISTER STATUS BLOCK ***********************\ - * SR0: current thread (if any, null if not) * - * SR1: saved copy of exception-time register now holding FLAGS * - * SR2: return address to the calling exception handler * - * SR3: must be preserved; may be important for other exceptions * - * FLAGS: CPU status flags * - *************************************************** * - * immediate goal: * - * We're already on the kernel stack, but not having * - * needed to use SR3. We can just make room on the * - * stack (r31) for our exception frame. * - \***************************************************************/ - subu r31, r31, SIZEOF_EF /* r31 now our E.F. */ - st FLAGS, r31, REG_OFF(EF_FLAGS) /* save flags */ - st r1, r31, GENREG_OFF(1) /* save prev. r1 (now r1 free)*/ - - ldcr r1, SR3 /* save previous SR3 */ - st r1, r31, REG_OFF(EF_SR3) - - addu r1, r31, SIZEOF_EF /* save previous r31 */ - br.n have_pcb - st r1, r31, GENREG_OFF(31) - - - _LABEL(use_SR3_pcb) - /***************** REGISTER STATUS BLOCK ***********************\ - * SR0: current thread (if any, null if not) * - * SR1: saved copy of exception-time register now holding FLAGS * - * SR2: return address to the calling exception handler * - * SR3: must be preserved; exception-time stack pointer * - * FLAGS: CPU status flags * - *************************************************** * - * immediate goal: * - * An exception occured while enabling the FPU. Since r31 * - * is the user's r31 while enabling the FPU, we had put * - * our pcb pointer into SR3, so make room from * - * there for our stack pointer. * - * We need to check if SR3 is the old stack pointer or the * - * pointer off to the user pcb. If it pointing to the user * - * pcb, we need to pick up the kernel stack. Otherwise * - * we need to allocate a frame upon it. * - * We look at the EPSR to see if it was from user mode * - * Unfortunately, we have no registers free at the moment * - * But we know register 0 in the pcb frame will always be * - * zero, so we can use it as scratch storage. * - * * - * * - \***************************************************************/ - xcr r30, r30, SR3 /* r30 = old exception frame */ - st r1, r30, GENREG_OFF(0) /* free up r1 */ - ld r1, r30, REG_OFF(EF_EPSR) /* get back the epsr */ - bb0.n PSR_SUPERVISOR_MODE_BIT, r1, 1f /* if user mode */ - ld r1, r30, GENREG_OFF(0) /* restore r1 */ - /* we were in kernel mode - dump frame upon the stack */ - st r0, r30, GENREG_OFF(0) /* repair old frame */ - subu r30, r30, SIZEOF_EF /* r30 now our E.F. */ - st FLAGS, r30, REG_OFF(EF_FLAGS) /* save flags */ - st r1, r30, GENREG_OFF(1) /* save prev. r1 (now r1 free) */ - - st r31, r30, GENREG_OFF(31) /* save previous r31 */ - or r31, r0, r30 /* make r31 our pointer. */ - addu r30, r30, SIZEOF_EF /* r30 now has previous SR3 */ - st r30, r31, REG_OFF(EF_SR3) /* save previous SR3 */ - br.n have_pcb - xcr r30, r30, SR3 /* restore r30 */ - 1: - /* we took an exception while restarting the FPU from user space. - Consequently, we never picked up a stack. Do so now. - R1 is currently free (saved in the exception frame pointed at by - r30) */ - or.u r1, r0, hi16(_kstack) - ld r1, r1, lo16(_kstack) - addu r1, r1, USIZE-SIZEOF_EF - st FLAGS, r1, REG_OFF(EF_FLAGS) /* store flags */ - st r31, r1, GENREG_OFF(31) /* store r31 - now free */ - st r30, r1, REG_OFF(EF_SR3) /* store old SR3 (pcb) */ - or r31, r1, r0 /* make r31 our exception frame pointer */ - ld r1, r30, GENREG_OFF(0) /* restore old r1 */ - st r0, r30, GENREG_OFF(0) /* repair that frame */ - st r1, r31, GENREG_OFF(1) /* store r1 in its proper place */ - br.n have_pcb - xcr r30, r30, SR3 /* restore r30 */ - - _LABEL(pickup_stack) - /***************** REGISTER STATUS BLOCK ***********************\ - * SR0: current thread * - * SR1: saved copy of exception-time register now holding FLAGS * - * SR2: return address to the calling exception handler * - * SR3: free * - * FLAGS: CPU status flags * - *************************************************** * - * immediate goal: * - * Since we're servicing an exception from user mode, we * - * know that SR3 is free. We use it to free up a temp. * - * register to be used in getting the thread's pcb * - \***************************************************************/ - stcr r31, SR3 /* save previous r31 */ - - /* switch to the thread's kernel stack. */ - or.u r31, r0, hi16(_curpcb) - ld r31, r31, lo16(_curpcb) - addu r31, r31, PCB_USER /* point to user save area */ - st FLAGS, r31, REG_OFF(EF_FLAGS) /* save flags */ - st r1, r31, GENREG_OFF(1) /* save prev. r1 (now r1 free)*/ - ldcr r1, SR3 /* save previous r31 */ - st r1, r31, GENREG_OFF(31) - /*FALLTHROUGH */ - - _LABEL(have_pcb) - /***************** REGISTER STATUS BLOCK ***********************\ - * SR0: current thread * - * SR1: saved copy of exception-time register now holding FLAGS * - * SR2: return address to the calling exception handler * - * SR3: free * - * r1: free * - * FLAGS: CPU status flags * - * r31: our exception frame * - * Valid in the exception frame: * - * Exception-time r1, r31, FLAGS. * - * Exception SR3, if appropriate. * - *************************************************** * - * immediate goal: * - * Save the shadow registers that need to be saved to * - * the exception frame. * - \***************************************************************/ - stcr TMP, SR3 /* free up TMP, TMP2, TMP3 */ - SAVE_TMP2 - SAVE_TMP3 - - /* save some exception-time registers to the exception frame */ - ldcr TMP, EPSR - ldcr TMP2, SFIP - ldcr TMP3, SNIP - st TMP, r31, REG_OFF(EF_EPSR) - st TMP2, r31, REG_OFF(EF_SFIP) - st TMP3, r31, REG_OFF(EF_SNIP) - - ldcr TMP, SSBR - ldcr TMP2, SXIP - ldcr TMP3, DMT0 - st TMP2, r31, REG_OFF(EF_SXIP) - -#if 0 - /* - * The following is a kludge so that - * a core file will have a copy of - * DMT0 so that 'sim' can display it - * correctly. - * After a data fault has been noticed, - * the real EF_DTM0 is cleared, so I need - * to throw this somewhere. - * There's no special reason I chose this - * register (FPIT)... it's just one of many - * for which it causes no pain to do this. - */ - st TMP3, r31, REG_OFF(EF_FPIT) -#endif - - /* - * The above shadow registers are obligatory for any and all - * exceptions. Now, if the data access pipeline is not clear, - * we must save the DMx shadow registers, as well as clear - * the appropriate SSBR bits for the destination registers of - * loads or xmems. - */ - bb0.n DMT_VALID_BIT, TMP3, DMT_check_finished - st TMP3, r31, REG_OFF(EF_DMT0) - - ldcr TMP2, DMT1 - ldcr TMP3, DMT2 - st TMP2, r31, REG_OFF(EF_DMT1) - st TMP3, r31, REG_OFF(EF_DMT2) - - ldcr TMP2, DMA0 - ldcr TMP3, DMA1 - st TMP2, r31, REG_OFF(EF_DMA0) - st TMP3, r31, REG_OFF(EF_DMA1) - - ldcr TMP2, DMA2 - ldcr TMP3, DMD0 - st TMP2, r31, REG_OFF(EF_DMA2) - st TMP3, r31, REG_OFF(EF_DMD0) - - ldcr TMP2, DMD1 - ldcr TMP3, DMD2 - st TMP2, r31, REG_OFF(EF_DMD1) - st TMP3, r31, REG_OFF(EF_DMD2) - - /* - *--------------------------------------------------------------- - * need to clear "appropriate" bits in the SSBR before - * we restart the FPU - */ - - - _LABEL(check_DMT0) - ldcr TMP2, DMT0 - bb0.n DMT_VALID_BIT, TMP2, DMT_check_finished - stcr r0, DMT0 /* so an exception at fpu_enable doesn't see our DMT0*/ - bb1 DMT_LOCK_BIT, TMP2, do_DMT0 - bb1 DMT_WRITE_BIT, TMP2, check_DMT1 - _LABEL(do_DMT0) - extu TMP2, TMP2, DMT_DREG_WIDTH <DMT_DREG_OFFSET> - set TMP2, TMP2, 1<5> - clr TMP, TMP, TMP2 - - _LABEL(check_DMT1) - ldcr TMP2, DMT1 - bb0 DMT_VALID_BIT, TMP2, check_DMT2 - bb1 DMT_LOCK_BIT, TMP2, do_DMT1 - bb1 DMT_WRITE_BIT, TMP2, check_DMT2 - _LABEL(do_DMT1) - extu TMP2, TMP2, DMT_DREG_WIDTH <DMT_DREG_OFFSET> - set TMP2, TMP2, 1<5> - clr TMP, TMP, TMP2 - - _LABEL(check_DMT2) - ldcr TMP2, DMT2 - bb0 DMT_VALID_BIT, TMP2, DMT_check_finished - bb1 DMT_LOCK_BIT, TMP2, do_DMT2_single - bb1 DMT_WRITE_BIT, TMP2, DMT_check_finished - bb1 DMT_DOUBLE_BIT,TMP2, do_DMT2_double - _LABEL(do_DMT2_single) - extu TMP2, TMP2, DMT_DREG_WIDTH <DMT_DREG_OFFSET> - br.n 1f - set TMP2, TMP2, 1<5> - _LABEL(do_DMT2_double) - extu TMP2, TMP2, DMT_DREG_WIDTH <DMT_DREG_OFFSET> - set TMP2, TMP2, 1<6> -1: clr TMP, TMP, TMP2 - - _LABEL(DMT_check_finished) - /***************** REGISTER STATUS BLOCK ***********************\ - * SR0: current thread * - * SR1: saved copy of exception-time register now holding FLAGS * - * SR2: return address to the calling exception handler * - * SR3: saved TMP * - * r1: free * - * TMP: possibly revised SSBR * - * TMP2: free * - * TMP3: free * - * FLAGS: CPU status flags * - * r31: exception frame * - * Valid in the exception frame: * - * Exception-time r1, r31, FLAGS. * - * Exception-time TMP2, TMP3. * - * Exception-time espr, sfip, snip, sxip. * - * Dmt0. * - * Other data pipeline control registers, if appropriate. * - * Exception SR3, if appropriate. * - \***************************************************************/ - ldcr r1, SR2 - jmp r1 /* return to allow the handler to clear more SSBR bits */ - -/************************************************************************/ -/************************************************************************/ - - _LABEL(clear_FPi_ssbr_bit) - /* - * Clear floatingpont-imprecise ssbr bits. - * Also, save appropriate FPU control registers to the E.F. - * - * r1: return address to calling exception handler - * TMP : (possibly) revised ssbr - * TMP2 : free - * TMP3 : free - */ - fldcr TMP2, FPSR - fldcr TMP3, FPCR - st TMP2, r31, REG_OFF(EF_FPSR) - st TMP3, r31, REG_OFF(EF_FPCR) - - fldcr TMP2, FPECR - fldcr TMP3, FPRH - st TMP2, r31, REG_OFF(EF_FPECR) - st TMP3, r31, REG_OFF(EF_FPRH) - - fldcr TMP2, FPIT - fldcr TMP3, FPRL - st TMP2, r31, REG_OFF(EF_FPIT) - st TMP3, r31, REG_OFF(EF_FPRL) - - /* - * We only need clear the bit in the SSBR for the - * 2nd reg of a double result [see section 6.8.5] - */ - #define FPIT_SIZE_BIT 10 - bb0 FPIT_SIZE_BIT, TMP2, not_double_fpi - extu TMP2, TMP2, 5<0> /* get the reg. */ - set TMP2, TMP2, 1<6> /* set width (width=2 will clear two bits) */ - clr TMP, TMP, TMP2 - - _LABEL(not_double_fpi) - jmp r1 - - -/************************************************************************/ -/************************************************************************/ - - - _LABEL(clear_FPp_ssbr_bit) - /* - * Clear floating pont precise ssbr bits. - * Also, save appropriate FPU control registers to the E.F. - * - * r1: return address to calling exception handler - * TMP : (possibly) revised ssbr - * TMP2 : free - * TMP3 : free - */ - fldcr TMP2, FPSR - fldcr TMP3, FPCR - st TMP2, r31, REG_OFF(EF_FPSR) - st TMP3, r31, REG_OFF(EF_FPCR) - - fldcr TMP2, FPHS1 - fldcr TMP3, FPHS2 - st TMP2, r31, REG_OFF(EF_FPHS1) - st TMP3, r31, REG_OFF(EF_FPHS2) - - fldcr TMP2, FPLS1 - fldcr TMP3, FPLS2 - st TMP2, r31, REG_OFF(EF_FPLS1) - st TMP3, r31, REG_OFF(EF_FPLS2) - - fldcr TMP2, FPPT - fldcr TMP3, FPECR - st TMP2, r31, REG_OFF(EF_FPPT) - st TMP3, r31, REG_OFF(EF_FPECR) - - #define FPPT_SIZE_BIT 5 - bb1.n FPPT_SIZE_BIT, TMP2, 1f - extu TMP3, TMP2, 5<0> /* get FP operation dest reg */ - br.n 2f - set TMP3, TMP3, 1<5> /* set size=1 -- clear one bit for "float" */ - 1: set TMP3, TMP3, 1<6> /* set size=2 -- clear two bit for "double" */ - 2: - clr TMP, TMP, TMP3 /* clear bit(s) in ssbr. */ - jmp r1 - - -/************************************************************************/ -/************************************************************************/ - - - _LABEL(clear_dest_ssbr_bit) - /* - * There are various cases where an exception can leave the - * destination register's bit in the SB set. - * Examples: - * misaligned or privilege exception on a LD or XMEM - * DIV or DIVU by zero. - * - * I think that if the instruction is LD.D, then two bits must - * be cleared. - * - * Even though there are a number of instructions/exception - * combinations that could fire this code up, it's only required - * to be run for the above cases. However, I don't think it'll - * ever be a problem to run this in other cases (ST instructions, - * for example), so I don't bother checking. If we had to check - * for every possible instruction, this code would be much larger. - * - * The only checking, then, is to see if it's a LD.D or not. - * - * At the moment.... - * r1: return address to calling exception handler - * TMP : (possibly) revised ssbr - * TMP2 : free - * TMP3 : free - */ - ldcr TMP3, EPSR /* going to check: user or system memory? */ - ldcr TMP2, SXIP /* get the instruction's address */ - bb1.n PSR_SUPERVISOR_MODE_BIT, TMP3, 2f - clr TMP2, TMP2, 2<0> /* get rid of valid and error bits. */ - - 1: /* user space load here */ -#if ERRATA__XXX_USR - NOP - ld.usr TMP2, TMP2, r0 /* get the instruction itself */ - NOP - NOP - NOP - br 3f -#else - br.n 3f - ld.usr TMP2, TMP2, r0 /* get the instruction itself */ -#endif - - 2: /* system space load here */ - ld TMP2, TMP2, r0 /* get the instruction itself */ - - 3: /* now have the instruction..... */ - /* - * Now see if it's a double load - * There are three forms of double load [IMM16, scaled, unscaled], - * which can be checked by matching against two templates: - * -- 77776666555544443333222211110000 -- - * if (((instruction & 11111100000000000000000000000000) == - * 00010000000000000000000000000000) || - * ((instruction & 11111100000000001111110011100000) == - * 11110100000000000001000000000000)) - * { - * It's a load double, so - * clear two SSBR bits. - * } - * else - * { - * It's not a load double. - * Must be a load single, xmem, or st - * Thus, clear one SSBR bit. - * } - */ - /* check the first pattern for ld.d */ - extu TMP3, TMP2, 16<16> /* get the upper 16 bits */ - mask TMP3, TMP3, 0xFC00 /* apply the mask */ - cmp TMP3, TMP3, 0x1000 /* if this is equal, it's a load double */ - bb1 eq, TMP3, misaligned_double - - /* still could be -- check the second pattern for ld.d */ - /* look at the upper 16 bits first */ - extu TMP3, TMP2, 16<16> /* get the upper 16 bits */ - mask TMP3, TMP3, 0xFC00 /* apply the mask */ - cmp TMP3, TMP3, 0xF400 /* if equal, it might be a load double */ - bb1 ne, TMP3, misaligned_single /* not equal, so must be single */ - - /* now look at the lower 16 bits */ - extu TMP3, TMP2, 16<0> /* get the lower 16 bits */ - mask TMP3, TMP3, 0xFCE0 /* apply the mask */ - cmp TMP3, TMP3, 0x1000 /* if this is equal, it's a load double */ - bb1 eq, TMP3, misaligned_double - - _LABEL(misaligned_single) - extu TMP2, TMP2, 5<21> /* get the destination register */ - br.n 1f - set TMP2, TMP2, 1<5> /* set size=1 */ - - _LABEL(misaligned_double) - extu TMP2, TMP2, 5<21> /* get the destination register */ - set TMP2, TMP2, 1<6> /* set size=2 -- clear two bit for "ld.d" */ - - 1: jmp.n r1 - clr TMP, TMP, TMP2 /* clear bit(s) in ssbr. */ - -/************************************************************************/ -/************************************************************************/ - - - - LABEL(setup_phase_two) - /***************** REGISTER STATUS BLOCK ***********************\ - * SR0: current thread * - * SR1: saved copy of exception-time register now holding FLAGS * - * SR2: free * - * SR3: saved TMP * - * r1: return address to calling exception handler * - * TMP: possibly revised SSBR * - * TMP2: free * - * TMP3: free * - * FLAGS: CPU status flags * - * r31: our exception frame * - * Valid in the exception frame: * - * Exception-time r1, r31, FLAGS. * - * Exception-time TMP2, TMP3. * - * Exception-time espr, sfip, snip, sxip. * - * Exception number (EF_VECTOR). * - * Dmt0 * - * Other data pipeline control registers, if appropriate. * - * FPU control registers, if appropriate. * - * Exception SR3, if appropriate. * - *************************************************** * - * immediate goal: * - * restore the system to the exception-time state (except * - * SR3 will be OUR stack pointer) so that we may resart the FPU. * - \***************************************************************/ - stcr TMP, SSBR /* done with SSBR, TMP now free */ - RESTORE_TMP2 /* done with extra temp regs */ - RESTORE_TMP3 /* done with extra temp regs */ - - /* Get the current PSR and modify for the rte to enable the FPU */ - ldcr TMP, PSR - clr TMP, TMP, 1<PSR_FPU_DISABLE_BIT> /* enable the FPU */ - clr TMP, TMP, 1<PSR_SHADOW_FREEZE_BIT> /* also enable shadowing */ - stcr TMP, EPSR - - /* the "+2" below is to set the VALID_BIT */ - or.u TMP, r0, hi16(fpu_enable + 2) - or TMP, TMP, lo16(fpu_enable + 2) - stcr TMP, SNIP /* jump to here fpu_enable */ - addu TMP, TMP, 4 - stcr TMP, SFIP /* and then continue after that */ - - set FLAGS, FLAGS, 1<FLAG_ENABLING_FPU> /* note what we're doing.*/ - xcr FLAGS, FLAGS, SR1 - st r1, r31, REG_OFF(EF_RET) /* save the return address */ - ld r1, r31, GENREG_OFF(1) /* get original r1 */ - - xcr TMP, r31, SR3 /* TMP now restored. R31 now saved in SR3 */ - ld r31, r31, GENREG_OFF(31) /* get original r31 */ - - /***************** REGISTER STATUS BLOCK ***********************\ - * SR0: current thread * - * SR1: CPU flags * - * SR2: free * - * SR3: pointer to our exception frame (our stack pointer) * - * r1 through r31: original exception-time values * - * * - * Valid in the exception frame: * - * Exception-time FLAGS. * - * Exception-time espr, sfip, snip, sxip. * - * Exception number (EF_VECTOR). * - * Dmt0 * - * Other data pipeline control registers, if appropriate. * - * FPU control registers, if appropriate. * - * Exception SR3, if appropriate. * - * Held temporarly in the exception frame: * - * Return address to the calling excption handler. * - *************************************************** * - * immediate goal: * - * Do an RTE to restart the fpu and jump to "fpu_enable" * - * Another exception (or exceptions) may be raised in * - * this, which is why FLAG_ENABLING_FPU is set in SR1. * - \***************************************************************/ - RTE /* jumps to "fpu_enable" on the next line to enable the FPU. */ - - _LABEL(fpu_enable) - FLUSH_PIPELINE - xcr TMP, TMP, SR3 /* get E.F. pointer */ - st.d r30, TMP, GENREG_OFF(30) /* save previous r30, r31 */ - or r31, TMP, r0 /* transfer E.F. pointer to r31 */ - ld TMP, r31, REG_OFF(EF_SR3)/* get previous SR3; maybe important*/ - - /* make sure that the FLAG_ENABLING_FPU bit is off */ - xcr FLAGS, FLAGS, SR1 - clr FLAGS, FLAGS, 1<FLAG_ENABLING_FPU> - xcr FLAGS, FLAGS, SR1 - - xcr TMP, TMP, SR3 /* replace TMP, SR3 */ - - /* now save all regs to the exception frame. */ - st.d r0 , r31, GENREG_OFF(0) - st.d r2 , r31, GENREG_OFF(2) - st.d r4 , r31, GENREG_OFF(4) - st.d r6 , r31, GENREG_OFF(6) - st.d r8 , r31, GENREG_OFF(8) - st.d r10, r31, GENREG_OFF(10) - st.d r12, r31, GENREG_OFF(12) - st.d r14, r31, GENREG_OFF(14) - st.d r16, r31, GENREG_OFF(16) - st.d r18, r31, GENREG_OFF(18) - st.d r20, r31, GENREG_OFF(20) - st.d r22, r31, GENREG_OFF(22) - st.d r24, r31, GENREG_OFF(24) - st.d r26, r31, GENREG_OFF(26) - st.d r28, r31, GENREG_OFF(28) -#ifdef JEFF_DEBUG - /* mark beginning of frame with notable value */ - or.u r20, r0, hi16(0x12345678) - or r20, r20, lo16(0x12345678) - st r20, r31, GENREG_OFF(0) -#endif - - /***************** REGISTER STATUS BLOCK ***********************\ - * SR0: current thread * - * SR1: free * - * SR2: free * - * SR3: previous exception-time SR3 * - * r1: return address to the calling exception handler * - * r2 through r30: free * - * r31: our exception frame * - * * - * Valid in the exception frame: * - * Exception-time r0 through r31. * - * Exception-time FLAGS. * - * Exception-time espr, sfip, snip, sxip. * - * Exception number (EF_VECTOR). * - * Dmt0 * - * Other data pipeline control registers, if appropriate. * - * FPU control registers, if appropriate. * - * Exception SR3, if appropriate. * - *************************************************** * - * immediate goal: * - * Pick up a stack if we came in from user mode. Put * - * A copy of the exception frame pointer into r30 * - * bump the stack a doubleword and write the exception * - * frame pointer. * - * if not an interrupt exception, * - * Turn on interrupts and service any outstanding * - * data access exceptions. * - * Return to calling exception handler to * - * service the exception. * - \***************************************************************/ - - /* - * If it's not the interrupt exception, enable interrupts and - * take care of any data access exceptions...... - * - * If interrupt exception, switch to interrupt stack if not - * already there. Else, switch to kernel stack. - */ - or r30, r0, r31 /* get a copy of the e.f. pointer */ - ld r2, r31, REG_OFF(EF_EPSR) - bb1 PSR_SUPERVISOR_MODE_BIT, r2, 1f /* If in kernel mode */ - - ld r3, r31, REG_OFF(EF_VECTOR) - cmp r3, r3, 1 /* is interrupt ? */ - bb0 eq, r3, 2f - or.u r31, r0, hi16(_intstack_end) /* swith to int stack */ - or r31, r31, lo16(_intstack_end) - br 3f - 2: - or.u r31, r0, hi16(_kstack) - ld r31, r31, lo16(_kstack) - addu r31, r31, USIZE /* point at proper end */ - br 3f - 1: - ld r3, r31, REG_OFF(EF_VECTOR) - cmp r3, r3, 1 /* is interrupt ? */ - bb0 eq, r3, 3f /* no, we will stay on kern stack */ - or.u r31, r0, hi16(_intstack_end) /* swith to int stack */ - or r31, r31, lo16(_intstack_end) - /* This label is here for debugging */ - exception_handler_has_ksp: global exception_handler_has_ksp - 3: /* - here - r30 holds a pointer to the exception frame. - r31 is a pointer to the kernel stack/interrupt stack. - */ - subu r31, r31, 8 /* make some breathing space */ - st r30, r31, 0 /* store frame pointer on the stack */ -#if DDB - st r30, r31, 4 /* store it again for the debugger to recognize */ -#endif DDB - - ld r2, r30, REG_OFF(EF_VECTOR) - bcnd.n eq0, r2, return_to_calling_exception_handler /* is error */ - ld r14, r30, REG_OFF(EF_RET) - cmp r3, r2, 1 /* interrupt is exception #1 ;Is an interrupt? */ - bb1.n eq, r3, return_to_calling_exception_handler /* skip if so */ - -#if DDB - cmp r3, r2, 130 /* DDB break exception */ - bb1.n eq, r3, return_to_calling_exception_handler - - cmp r3, r2, 132 /* DDB entry exception */ - bb1.n eq, r3, return_to_calling_exception_handler -#endif - - ldcr r2, PSR - clr r2, r2, 1<PSR_INTERRUPT_DISABLE_BIT> /* enable interrupts */ - stcr r2, PSR -#if DDB - FLUSH_PIPELINE -#endif - - /* service any outstanding data pipeline stuff - - check dmt0 anything outstanding?*/ - - ld r3, r30, REG_OFF(EF_DMT0) - bb0 DMT_VALID_BIT, r3, return_to_calling_exception_handler - -/* - r30 can be clobbered by calls. So stuff its value into a - preserved register, say r15. R14 is in use (see return_to_... below). - */ - or r15, r0, r30 - - CALL(_trap, T_DATAFLT, r15) - CALL(_data_access_emulation, r15, r0) - -/* restore it... */ - or r30, r0, r15 - - /* clear the dmt0 word in the E.F */ - st r0, r30, REG_OFF(EF_DMT0) - - _LABEL(return_to_calling_exception_handler) - jmp r14 /* loaded above */ - - - -/* - * ########################################################################## - * ########################################################################## - * ########################################################################## - */ - -LABEL(return_from_exception_handler) -LABEL(_return_from_main) - /* - * Regs r1-r30 are free. R31 is pointing at the word - * on the kernel stack where our pointer to the exception frame - * it stored. Reload it now. - * - * At this point, if EF_DMT0 is not zero, then - * this must have been an interrupt where the fault didn't - * get corrected above. We'll do that now. - * - * We load it into r14 since it is preserved across function - * calls, and we may have to call some routines from within here. - * - * control is transfered here from obvious places in this file - * and thread_bootstrap in luna88k/locore.c. - * - */ -#define FPTR r14 - ld FPTR, r31, 0 /* grab exception frame pointer */ - ld r3, FPTR, REG_OFF(EF_DMT0) - bb0 DMT_VALID_BIT, r3, _check_ast /*[Oh well, nothing to do here] */ - -#if 1 - /* - * This might happen for non-interrupts If the user sets DMT0 - * in an exception handler......... - */ - ld r2, FPTR, REG_OFF(EF_VECTOR) - cmp r2, r2, 1 /* interrupt is exception #1 ; Is an interrupt? */ - bb1 eq, r2, 1f - LABEL(oops) - or.u r4, r0, hi16(2f) - or r4, r4, lo16(2f) -#if DDB - CALL(_db_printf, r4, r0) - tb0 0, r0, 132 -#endif - br 1f - data - 2: string "OOPS: DMT0 not zero and not interrupt.\n\000" - align 4 - text - 1: -#endif - /* - * If it's the interrupt exception, enable interrupt. - * Take care of any data access exception...... 90/8/15 add by yama - */ - ld r2, FPTR, REG_OFF(EF_VECTOR) - cmp r2, r2, 1 /* interrupt is exception #1 ; Is an interrupt? */ - bb1 ne, r2, 1f /* If not so, skip */ - - /* if EPSR has interrupts disabled, skip also */ - ld r2, FPTR, REG_OFF(EF_EPSR) - bb1 PSR_INTERRUPT_DISABLE_BIT, r2, 1f /* skip if disabled */ - ldcr r2, PSR - clr r2, r2, 1<PSR_INTERRUPT_DISABLE_BIT> /* enable interrupts */ - FLUSH_PIPELINE - stcr r2, PSR - 1: - ld r2, FPTR, REG_OFF(EF_DMT0) - bb0 DMT_VALID_BIT, r2, 2f - - /* - * if there happens to be a data fault that hasn't been serviced yet, - * go off and service that... - */ - CALL(_trap, T_DATAFLT, r30) - CALL(_data_access_emulation, r30, r0) /* really only 2 args */ - - /* clear the dmt0 word in the E.F. */ - st r0 , FPTR, REG_OFF(EF_DMT0) - 2: - -LABEL(_check_ast) - - ldcr r1, PSR /* get current PSR */ - set r1, r1, 1<PSR_INTERRUPT_DISABLE_BIT> /* set for disable intr. */ - stcr r1, PSR /* install new PSR */ - FLUSH_PIPELINE - - /* - * - * This code (including a bit above) is more or less: - * - * check_ast: - * - * Disable interrupts - * if (exception was from user mode && want_ast) - * { - * trap(AST, frame) - * goto check_ast - * } - * - * We want to service AST's only if returning to user space. - */ - - ld r2, FPTR, REG_OFF(EF_EPSR) /* get pre-exception PSR */ - bb1 PSR_SUPERVISOR_MODE_BIT, r2, no_ast /*skip if in system mode */ - - /* get and check want_ast */ - or.u r2, r0, hi16(_want_ast) - ld r3, r2, lo16(_want_ast) - bcnd eq0, r3, no_ast - /* - * trap(AST,...) will service - * software interrupts and - * network interrupts - */ - CALL(_trap, T_ASTFLT, FPTR) /* enter with interrupts disabled */ - subu r31, r31, 40 /* return with interrupts enabled */ - addu r31, r31, 40 - br _check_ast /* and check again..... */ - -_LABEL(no_ast) - - /* now ready to return....*/ - - /* - * Transfer the frame pointer to r31, since we no longer need a stack. - * No page faults here, and interrupts are disabled. - */ - - or r31, r0, FPTR - - -/* restore r1 later */ - ld.d r2 , r31, GENREG_OFF(2) - ld.d r4 , r31, GENREG_OFF(4) - ld.d r6 , r31, GENREG_OFF(6) - ld.d r8 , r31, GENREG_OFF(8) - ld.d r10, r31, GENREG_OFF(10) - ld.d r12, r31, GENREG_OFF(12) - ld.d r14, r31, GENREG_OFF(14) - ld.d r16, r31, GENREG_OFF(16) - ld.d r18, r31, GENREG_OFF(18) - ld.d r20, r31, GENREG_OFF(20) - ld.d r22, r31, GENREG_OFF(22) - ld.d r24, r31, GENREG_OFF(24) - ld.d r26, r31, GENREG_OFF(26) - ld.d r28, r31, GENREG_OFF(28) - /* restore r1, r30, r31 later */ - - - /* disable shadowing (interrupts already disabled above) */ - ldcr r1, PSR - set r1, r1, 1<PSR_SHADOW_FREEZE_BIT> - FLUSH_PIPELINE - stcr r1, PSR - - /* reload the control regs*/ - - /* - * Note: no need to restore the SXIP. - * When the "rte" causes execution to continue - * first with the instruction pointed to by the NIP - * and then the FIP. - * - * See MC88100 Risc Processor User's Manual, 2nd Edition, - * section 6.4.3.1.2-4 - */ - ld r30, r31, REG_OFF(EF_SNIP) - ld r1, r31, REG_OFF(EF_SFIP) - stcr r0, SSBR - stcr r30, SNIP - stcr r1, SFIP - - ld r30, r31, REG_OFF(EF_EPSR) - ld r1, r31, REG_OFF(EF_MODE) - stcr r30, EPSR - - /* Now restore r1, r30, and r31 */ - ld r1, r31, GENREG_OFF(1) - ld.d r30, r31, GENREG_OFF(30) - - _LABEL(return_from_exception) - RTE - -/***********************************************************************/ -/***********************************************************************/ -/***********************************************************************/ diff --git a/sys/arch/mvme88k/mvme88k/exception_return.s b/sys/arch/mvme88k/mvme88k/exception_return.s deleted file mode 100644 index e770248f522..00000000000 --- a/sys/arch/mvme88k/mvme88k/exception_return.s +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1992 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* - * Exception handler return routines. - */ -/* - * HISTORY - * $Log: exception_return.s,v $ - * Revision 1.1 1995/10/18 12:32:22 deraadt - * moved from m88k directory - * - * Revision 1.1.1.1 1995/10/18 10:54:27 deraadt - * initial 88k import; code by nivas and based on mach luna88k - * - * Revision 2.6 93/01/26 18:00:53 danner - * conditionalized define of ASSEMBLER. - * [93/01/22 jfriedl] - * - * Revision 2.5 92/08/03 17:51:58 jfriedl - * Update includes, changed to new style manifiest constants [danner] - * - * Revision 2.4 92/05/04 11:28:03 danner - * Remove debugging cruft. Leave argument save area in call to - * ast_taken. - * [92/05/03 danner] - * Remove debugging cruft. - * [92/04/12 danner] - * [92/04/12 16:25:32 danner] - * - * In the case of an ast on a return from exception, a random value - * was stored into R2. Fixed. - * [92/04/12 danner] - * - * Revision 2.3 92/04/01 10:56:17 rpd - * Corrections to the ast handling code. - * [92/03/20 danner] - * Corrected typo in ast_taken register reload code. - * [92/03/03 danner] - * - * Revision 2.2 92/02/18 18:03:30 elf - * Created. - * [92/02/01 danner] - * - */ - -#include <mach_kdb.h> - -#ifndef ASSEMBLER -# define ASSEMBLER /* this is required for some of the include files */ -#endif - -#include <assym.s> /* for PCB_KSP, etc */ -#include <machine/asm.h> -#include <motorola/m88k/m88100/m88100.h> -#include <motorola/m88k/m88100/psl.h> -#include <motorola/m88k/trap.h> /* for T_ defines */ - -/* - * Return from exception - all registers need to be restored. - * R30 points to the exception frame. - * R31 is the kernel stack pointer. - * Any interrupt status is acceptable on entry. - * All other registers are scratch. - * Any data and fp faults must be cleared up before this routine - * is called. - */ -ENTRY(return_from_exception) - ld r10, r30, REG_OFF(EF_EPSR) ; get old epsr - ldcr r2, PSR - set r2, r2, 1<PSR_IND_LOG> - stcr r2, PSR ; disable interrupts - FLUSH_PIPELINE - bb1 PSR_IND_LOG, r10, 1f ; no need to check - bsr ast_check -1: -/* current status - - - interrupts disabled. Asts checked for. - Ready to restore registers and return from the exception. - R30 points to the exception frame. -*/ - /* reload r2-r13 */ - ld.d r2 , r30, GENREG_OFF(2) - ld.d r4 , r30, GENREG_OFF(4) - ld.d r6 , r30, GENREG_OFF(6) - ld.d r8 , r30, GENREG_OFF(8) - ld.d r10, r30, GENREG_OFF(10) - br.n return_common - ld.d r12, r30, GENREG_OFF(12) - -/* - * Return from syscall - registers r3-r13 need not be restored. - * R30 points to the exception frame. - * R31 is the kernel stack pointer. - * All other registers are scratch. - * Any interrupt status is acceptable on entry. - */ - -ENTRY(return_from_syscall) -/* turn off interrupts, check ast */ - ldcr r3, PSR - set r3, r3, 1<PSR_IND_LOG> - stcr r3, PSR ; disable interrupts - FLUSH_PIPELINE - bsr ast_check - /* restore r2 */ - ld r2, r30, GENREG_OFF(2) - /* current status - - interrupts disabled. Asts checked for. - Ready to restore registers and return from the exception. - R30 holds the frame pointer - */ - /* br return_common */ - - -LABEL(return_common) -/* - R30 points to the exception frame. - Interrupts off. - r2-r13 need to be preserved. -*/ - /* restore r14-r29 */ - ld.d r14, r30, GENREG_OFF(14) - ld.d r16, r30, GENREG_OFF(16) - ld.d r18, r30, GENREG_OFF(18) - ld.d r20, r30, GENREG_OFF(20) - ld.d r22, r30, GENREG_OFF(22) - ld.d r24, r30, GENREG_OFF(24) - ld.d r26, r30, GENREG_OFF(26) - ld.d r28, r30, GENREG_OFF(28) - ; restore r1, r30, r31 later - /* turn off shadowing - we are about to trash - our kernel stack pointer, which means this code - cannot be tracked by a debuuger */ - ; disable shadowing (interrupts already disabled above) - ldcr r1, PSR - set r1, r1, 1<PSR_SFRZ_LOG> - stcr r1, PSR - FLUSH_PIPELINE - - ; reload the control regs - /* - * Note: no need to restore the SXIP. - * When the "rte" causes execution to continue - * first with the instruction pointed to by the NIP - * and then the FIP. - * - * See MC88100 Risc Processor User's Manual, 2nd Edition, - * section 6.4.3.1.2-4 - */ - ld r31, r30, REG_OFF(EF_SNIP) - ld r1, r30, REG_OFF(EF_SFIP) - stcr r0, SSBR - stcr r31, SNIP - stcr r1, SFIP - - ld r31, r30, REG_OFF(EF_EPSR) - ld r1, r30, REG_OFF(EF_MODE) - stcr r31, EPSR - - /* - * restore the mode (cpu flags). - * This can't be done directly, because the flags include the - * CPU number. We might now be on a different CPU from when we - * first entered the exception handler (due to having been blocked - * and then restarted on a different CPU). Thus, we'll grab the - * old flags and put the current cpu number there. - */ - clr r1, r1, FLAG_CPU_FIELD_WIDTH <0> /* clear bits 0..WIDTH */ - ldcr r31, SR1 - clr r31, r31, 0<FLAG_CPU_FIELD_WIDTH> /* clear bits WIDTH..31 */ - or r31, r1, r31 - stcr r31, SR1 ; restore old flags with (maybe new) CPU number - - /* Now restore r1, r30, and r31 */ - ld r1, r30, GENREG_OFF(1) - ld.d r30, r30, GENREG_OFF(30) - - _LABEL(return_from_exception) - RTE - - -LABEL(ast_check) - /* enter here with interrupts disabled */ - /* - * - * ast_check: - * - * if (exception was from user mode && need_ast[cpu_number()]) - * { - * call: ast_taken()(turns interrupts back on,clears need_ast) - * disable_interrupts - * goto check_ast - * } - * return (with interrupts off) - * - * Upon entry, - * R30 is the exception frame pointer - * R31 is the kernel stack pointer - * R1 is the return address - * - * Upon entry to this function, all user register state - * must be up to date in the pcb. In particular, the return - * value for thread_syscall_return has to have been saved. - * - * If we block, we will return through thread_exception_return. - * - * This routine clobbers r2-r29. - * - */ - ld r3, r30, REG_OFF(EF_EPSR) - bb1 PSR_MODE_LOG, r3, 1f - ldcr r3, SR1 - mak r3, r3, FLAG_CPU_FIELD_WIDTH <2> ; r3 = cpu# - or.u r3, r3, hi16(_need_ast) - ld r4, r3, lo16(_need_ast) ; r4 now need_ast[cpu#] - bcnd eq0, r4, 1f - /* preserve r1, r30 */ - subu r31, r31, 40 - st r1, r31, 32 - bsr.n _ast_taken ; no arguments - st r30, r31, 36 - /* turn interrupts back off */ - ldcr r1, PSR ; get current PSR - set r1, r1, 1<PSR_IND_LOG> ; set for disable intr. - stcr r1, PSR ; install new PSR - FLUSH_PIPELINE - /* restore register state */ - ld r30, r31, 36 - ld r1, r31, 32 - br.n ast_check ; check again - addu r31, r31, 40 -1: - /* no ast. Return back to caller */ - jmp r1 diff --git a/sys/arch/mvme88k/mvme88k/genassym.c b/sys/arch/mvme88k/mvme88k/genassym.c deleted file mode 100644 index ee87635588a..00000000000 --- a/sys/arch/mvme88k/mvme88k/genassym.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Copyright (c) 1982, 1990 The Regents of the University of California. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)genassym.c 7.8 (Berkeley) 5/7/91 - * $Id: genassym.c,v 1.1 1995/10/18 12:32:22 deraadt Exp $ - */ - -#ifndef KERNEL -#define KERNEL -#endif /* KERNEL */ - -#include <sys/param.h> -#include <sys/buf.h> -#include <sys/proc.h> -#include <sys/mbuf.h> -#include <sys/msgbuf.h> -#include <machine/cpu.h> -#include <machine/trap.h> -#include <machine/psl.h> -#include <machine/vmparam.h> -#include <sys/syscall.h> -#include <vm/vm.h> -#include <sys/user.h> - -#define pair(TOKEN, ELEMENT) \ - printf("#define " TOKEN " %u\n", (unsigned)(ELEMENT)) - -#define int_offset_of_element(ELEMENT) (((unsigned)&(ELEMENT))/sizeof(int)) - -main() -{ - register struct proc *p = (struct proc *)0; - struct m88100_saved_state *ss = (struct m88100_saved_state *) 0; - register struct vmmeter *vm = (struct vmmeter *)0; - register struct user *up = (struct user *)0; - register struct rusage *rup = (struct rusage *)0; - struct vmspace *vms = (struct vmspace *)0; - pmap_t pmap = (pmap_t)0; - struct pcb *pcb = (struct pcb *)0; - register unsigned i; - - printf("#ifndef __GENASSYM_INCLUDED\n"); - printf("#define __GENASSYM_INCLUDED 1\n\n"); - - printf("#ifdef ASSEMBLER\n" - "#define NEWLINE \\\\ \n" - "#endif\n"); - - printf("#define\tP_FORW %d\n", &p->p_forw); - printf("#define\tP_BACK %d\n", &p->p_back); - printf("#define\tP_VMSPACE %d\n", &p->p_vmspace); - printf("#define\tP_ADDR %d\n", &p->p_addr); - printf("#define\tP_PRIORITY %d\n", &p->p_priority); - printf("#define\tP_STAT %d\n", &p->p_stat); - printf("#define\tP_WCHAN %d\n", &p->p_wchan); - printf("#define\tSRUN %d\n", SRUN); - - printf("#define\tVM_PMAP %d\n", &vms->vm_pmap); - printf("#define\tV_INTR %d\n", &vm->v_intr); - - printf("#define\tUPAGES %d\n", UPAGES); - printf("#define\tPGSHIFT %d\n", PGSHIFT); - - printf("#define\tU_PROF %d\n", &up->u_stats.p_prof); - printf("#define\tU_PROFSCALE %d\n", &up->u_stats.p_prof.pr_scale); - printf("#define\tPCB_ONFAULT %d\n", &pcb->pcb_onfault); - printf("#define\tSIZEOF_PCB %d\n", sizeof(struct pcb)); - - printf("#define\tSYS_exit %d\n", SYS_exit); - printf("#define\tSYS_execve %d\n", SYS_execve); - printf("#define\tSYS_sigreturn %d\n", SYS_sigreturn); - - pair("EF_R0", int_offset_of_element(ss->r[0])); - pair("EF_R31", int_offset_of_element(ss->r[31])); - pair("EF_FPSR", int_offset_of_element(ss->fpsr)); - pair("EF_FPCR", int_offset_of_element(ss->fpcr)); - pair("EF_EPSR", int_offset_of_element(ss->epsr)); - pair("EF_SXIP", int_offset_of_element(ss->sxip)); - pair("EF_SFIP", int_offset_of_element(ss->sfip)); - pair("EF_SNIP", int_offset_of_element(ss->snip)); - pair("EF_SSBR", int_offset_of_element(ss->ssbr)); - pair("EF_DMT0", int_offset_of_element(ss->dmt0)); - pair("EF_DMD0", int_offset_of_element(ss->dmd0)); - pair("EF_DMA0", int_offset_of_element(ss->dma0)); - pair("EF_DMT1", int_offset_of_element(ss->dmt1)); - pair("EF_DMD1", int_offset_of_element(ss->dmd1)); - pair("EF_DMA1", int_offset_of_element(ss->dma1)); - pair("EF_DMT2", int_offset_of_element(ss->dmt2)); - pair("EF_DMD2", int_offset_of_element(ss->dmd2)); - pair("EF_DMA2", int_offset_of_element(ss->dma2)); - pair("EF_FPECR", int_offset_of_element(ss->fpecr)); - pair("EF_FPHS1", int_offset_of_element(ss->fphs1)); - pair("EF_FPLS1", int_offset_of_element(ss->fpls1)); - pair("EF_FPHS2", int_offset_of_element(ss->fphs2)); - pair("EF_FPLS2", int_offset_of_element(ss->fpls2)); - pair("EF_FPPT", int_offset_of_element(ss->fppt)); - pair("EF_FPRH", int_offset_of_element(ss->fprh)); - pair("EF_FPRL", int_offset_of_element(ss->fprl)); - pair("EF_FPIT", int_offset_of_element(ss->fpit)); - pair("EF_VECTOR", int_offset_of_element(ss->vector)); - pair("EF_MASK", int_offset_of_element(ss->mask)); - pair("EF_MODE", int_offset_of_element(ss->mode)); - - pair("EF_RET", int_offset_of_element(ss->scratch1)); - pair("EF_NREGS", sizeof(*ss)/sizeof(int)); - - /* make a sanity check */ - if (sizeof(*ss) & 7) - { - /* - * This contortion using write instead of fputs(stderr) - * is necessary because we can't include stdio.h in here. - */ - static char buf[] = - "Exception frame not a multiple of double words\n"; - write(2 /* stderr */,buf,sizeof(buf)); - exit(1); - } - pair("SIZEOF_EF", sizeof(*ss)); - printf("\n#endif /* __GENASSYM_INCLUDED */\n"); - exit(0); -} diff --git a/sys/arch/mvme88k/mvme88k/locore.S b/sys/arch/mvme88k/mvme88k/locore.S deleted file mode 100644 index 055799a566f..00000000000 --- a/sys/arch/mvme88k/mvme88k/locore.S +++ /dev/null @@ -1,497 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ - -/* $RCSfile: locore.S,v $ -- asm boot routines - * - ********************************************************************** - *****************************************************************RCS**/ - -#ifndef ASSEMBLER /* predefined by ascpp, at least */ -#define ASSEMBLER -#endif - -#include "machine/locore.h" -#include "machine/m88100.h" -#include "machine/trap.h" -#include "machine/asm.h" -#include "machine/board.h" /* lots of stuff (OBIO_PIO*, SYSV_BASE, etc)*/ -#include "machine/vmparam.h" /* INTSTACK_SIZE */ -#include "assym.s" - -/***********************************************************************/ - -/* - * Arrange for the include file version number to appear directly in - * the namelist. - */ -global _INCLUDE_VERSION -def _INCLUDE_VERSION, INCLUDE_VERSION -#ifndef NBPG -#define NBPG 4096 -#endif /* NBPG */ - -#ifndef UADDR -#define UADDR 0xFFEE0000 /* address of u */ -#endif /* UADDR */ -#ifndef USIZE -#define USIZE (UPAGES * NBPG) -#endif /* USIZE */ -/* - * The memory looks like: - * 0x00000 - 0x01000 : trap vectors - * 0x01000 - 0x10000 : first 64k used by BUG - * 0x10000 == start : Boot loader jumps here. (for now, this can - * handle only NMAGIC - screwy linker) - * - ***********************************************************************/ - text - -LABEL(_kernel_text) -LABEL(_kernelstart) -LABEL(_start) -LABEL(start) - br _start_text -#if 0 - .align 4096 ; VBR points to page aligned list - _LABEL(vector_list) /* references memory BELOW this line */ - #include "machine/exception_vectors.h" - word END_OF_VECTOR_LIST - - _LABEL(_msgsw) - word 0 /* Bits here turn on/off debugging somewhere. */ -#endif -/* - * Do a dump. Called by auto-restart. - */ - - global _dumpsys -LABEL(_doadump) - bsr _dumpsys - bsr _doboot - /*NOTREACHED*/ - -/**************************************************************************/ -LABEL(_start_text) /* This is the *real* start upon poweron or reset */ - /* - * Args passed by boot loader - * r2 howto - * r3 first_addr (first available address) - * r4 ((Clun << 8) | Dlun & FF) -> bootdev - * r5 esym - * r6 miniroot - */ - or.u r13, r0, hi16(_boothowto) - st r2, r13, lo16(_boothowto) - or.u r13, r0, hi16(_first_addr) - st r3, r13, lo16(_first_addr) -#if 0 - or.u r13, r0, hi16(_bootdev) - st r4, r13, lo16(_bootdev) -#endif - or.u r13, r0, hi16(_esym) - st r5, r13, lo16(_esym) - or.u r13, r0, hi16(_miniroot) - st r6, r13, lo16(_miniroot) - - /* - * CPU Initialization - * - * Every CPU starts from here.. - * (well, from 'start' above, which just jumps here). - * - * I use r11 and r22 here 'cause they're easy to not - * get mixed up -- r10, for example, looks too similar - * to r0 when not being careful.... - * - * Ensure that the PSR is as we like: - * supervisor mode - * big-endian byte ordering - * concurrent operation allowed - * carry bit clear (I don't think we really care about this) - * FPU enabled - * misaligned access raises an exception - * interrupts disabled - * shadow registers frozen - * - * The manual says not to disable interrupts and freeze shadowing - * at the same time because interupts are not actually disabled - * until after the next instruction. Well, if an interrupt - * occurs now, we're in deep anyway, so I'm going to do - * the two together. - * - * Upon a reset (or poweron, I guess), the PSR indicates: - * supervisor mode - * interrupts, shadowing, FPU, missaligned exception: all disabled - * - * We'll just construct our own turning on what we want. - * - * jfriedl@omron.co.jp - */ - stcr r0, SSBR /* clear this for later */ - - /* XXX We can use SR0-SR3 for any purpose */ - set r11, r0, 1<PSR_SUPERVISOR_MODE_BIT> - set r11, r11, 1<PSR_INTERRUPT_DISABLE_BIT> - stcr r11, PSR - /* shadowing, FPU, misalgined access exception: all enabled now.*/ -#if 0 - or.u r11, r0, hi16(_vector_list) - or r11, r11, lo16(_vector_list) - stcr r11, VBR -#endif /* 0 */ - stcr r0, VBR - -/************************************************************************/ - -#if defined(RAW_PRINTF) && RAW_PRINTF - bsr replace_mayput_with_rawputchar -#endif - - /* - * switch to interrupt stack - */ - or.u r31, r0, hi16(_intstack_end) - or r31, r31, lo16(_intstack_end) - clr r31, r31, 3<0> /* round down to 8-byte boundary */ - - /* - * Want to make the call: - * vector_init(VBR, vector_list) - */ - or.u r3, r0, hi16(_vector_list) - or r3, r3, lo16(_vector_list) - bsr.n _vector_init - ldcr r2, VBR - -#if 0 - /* clear BSS. Boot loader might have already done this... */ - or.u r2, r0, hi16(_edata) - or r2, r2, lo16(_edata) - or.u r4, r0, hi16(_end) - or r4, r4, lo16(_end) - bsr.n _bzero /* bzero(edata, end-edata) */ - subu r3, r4, r2 -#endif - - /* still on int stack */ - bsr.n _m187_bootstrap - subu r31, r31, 40 - addu r31, r31, 40 - - /* switch to proc0 uarea */ - - or.u r10, r0, hi16(UADDR) - or r31, r10,lo16(UADDR) - addu r31, r31, USIZE - - /* make the call: main() */ - bsr.n _main - subu r31, r31, 40 - addu r31, r31, 40 - br _return_from_main - -/*****************************************************************************/ - - data - .align 4096 ; VBR points to page aligned list - global _vector_list -_vector_list: ; references memory BELOW this line - #include "machine/exception_vectors.h" - word END_OF_VECTOR_LIST - - global _msgsw -_msgsw: - word 0 ;Bits here turn on/off debugging somewhere. - .align 4096 - global _intstack - global _intstack_end -_intstack: - space 4 * NBPG /* 16K */ -_intstack_end: - -/* - * When a process exits and its u. area goes away, we set curpcb to point - * to this `u.', leaving us with something to use for an interrupt stack, - * and letting all the register save code have a pcb_uw to examine. - * This is also carefully arranged (to come just before u0, so that - * process 0's kernel stack can quietly overrun into it during bootup, if - * we feel like doing that). - * Should be page aligned. - */ - global _idle_u -_idle_u: - space UPAGES * NBPG - -/* - * Process 0's u. - * - * This must be page aligned - */ - global _u0 - align 4096 -_u0: space UPAGES * NBPG -estack0: - -/* - * UPAGES get mapped to kstack - */ - - global _kstack -_kstack: - word UADDR - -#ifdef DDB - global _esym -_esym: - word 0 -#endif /* DDB */ - - global _proc0paddr /* move to C code */ -_proc0paddr: - word _u0 /* KVA of proc0 uarea */ - -/* - * _curpcb points to the current pcb (and hence u. area). - * Initially this is the special one. - */ -/* - * pcb is composed of kernel state + user state - * I may have to change curpcb to u0 + PCB_USER based on what - * other parts expect XXX - */ - global _curpcb /* move to C code */ -_curpcb: word _u0 /* curpcb = &u0 */ - -/* - * Trampoline code. Gets copied to the top of - * user stack in exec. - */ - global _sigcode -_sigcode: - /* r31 points to sigframe */ - ld r2, r31, 0 /* signo */ - ld r3, r31, 4 /* code */ - ld r4, r31, 8 /* sigcontext* */ - or r5, r0, 0 /* addr = 0 for now */ - ld r6, r31, 12 /* handler */ - jsr.n r6 - addu r31, r31, 40 - subu r31, r31, 40 - ld r2, r31, 8 /* sigcontext* */ - or r9, r0, SYS_sigreturn - tb0 0, r0, 128 /* syscall trap, calling sigreturn */ - or r0, r0, 0 - or r0, r0, 0 - /* sigreturn will not return unless it fails */ - or r9, r0, SYS_exit - tb0 0, r0, 128 /* syscall trap, exit */ - or r0, r0, 0 - or r0, r0, 0 - global _esigcode -_esigcode: - -#if 0 -/* - * thread_bootstrap: - * - * Bootstrap a new thread using the thread state that has been - * placed on the stack. Our fp has been set up for us, we only need - * to fix up a few things in the saved frame, then get into - * usermode. - */ -ENTRY(thread_bootstrap) - /* - * Here r31 should point to the place on our stack which - * contains a pointer to our exception frame. - */ -#if DDB - ENTRY_ASM -#endif - br return_from_exception_handler - -/* - * save_context - */ -ENTRY(save_context) - subu r31,r31,40 /* allocate stack for r1 and args */ - st r1,r31,36 /* save return address */ - bsr _spl /* get the current interrupt mask */ - ld r1,r31,36 /* recover return address */ - addu r31,r31,40 /* put stack pointer back */ - ldcr r10,SR0 /* r10 <- current_thread() */ - ld r10,r10,THREAD_PCB /* r10 <- pcb */ -#if (PCB_KERNEL!=0) - addu r10, r10, PCB_KERNEL /* point to kernel save region */ -#endif - st r1,r10,0 /* do setjmp */ /* save return address */ - st r14,r10,4 - st r15,r10,2*4 - st r16,r10,3*4 - st r17,r10,4*4 - st r18,r10,5*4 - st r19,r10,6*4 - st r20,r10,7*4 - st r21,r10,8*4 - st r22,r10,9*4 - st r23,r10,10*4 - st r24,r10,11*4 - st r25,r10,12*4 - /* In principle, registers 26-29 are never manipulated in the - kernel. Maybe we can skip saving them? */ - st r26,r10,13*4 - st r27,r10,14*4 - st r28,r10,15*4 - st r29,r10,16*4 - st r30,r10,17*4 /* save frame pointer */ - st r31,r10,18*4 /* save stack pointer */ - st r2,r10,19*4 /* save interrupt mask */ - /* we need to switch to the interrupt stack here */ - or.u r31, r0, hi16(_intstack) - or r31, r31, lo16(_intstack) - addu r31, r31, INTSTACK_SIZE /* end of stack */ - clr r31, r31, 3<0> /* round down to 8-byte boundary */ - jmp.n r1 - or r2,r0,r0 -#endif /* 0 */ - -/* ------------------------------------------------------------------------ */ -/* - * unsigned measure_pause(volatile int *flag) - * - * Count cycles executed until *flag becomes nonzero. - * Return the number of cycles counted. - */ -ENTRY(measure_pause) - /* R2 is pointer to flag */ - def GRANULAIRTY, 10000 - - or r3, r0, 1 /* r3 is my counter, this is the first */ - - measure_pause_outer_loop: - or r4, r0, GRANULAIRTY - - measure_pause_inner_loop: - /* - * Execute a tight loop of a known number of cycles. - * This assumes, of course, that the instruction cache is on. - * This loop takes two cycles per iteration. - */ - bcnd.n ne0, r4, measure_pause_inner_loop - subu r4, r4, 1 - - - /* - * Now add the number of cycles done above (plus the overhead - * of the outer loop) to the total count. - * Also, check the *flag and exit the outer loop if it's non-zero. - * - * The overhead is really unknown because it's not known how - * the memory system will tread the access to *flag, so we just - * take a guess. - */ - ld r4, r2, r0 /* get the flag */ - addu r3, r3, (GRANULAIRTY * 2 + 10) /* account for the cost */ - bcnd eq0, r4, measure_pause_outer_loop /* continue or exit the loop*/ - - jmp.n r1 - or r2, r3, r0 /* pass count back */ - -/* - * void delay_in_microseconds(int count) - * - * The processor loops (busy waits) for the given number of microseconds: - * Thus, delay_in_microseconds(1000000) will delay for one second. - * - * REGISTER USAGE: - * IN r1 - return address - * IN r2 - (signed int) number of microseconds - * r3 - (float) number of microseconds - * r4/5 - (double) number of cycles per microsecond - * r6 - (float) number of cycles to delay - * r7 - (signed) number of cycles to delay - */ -ENTRY(delay_in_microseconds) -ENTRY(delay) - flt.ss r3, r2 /* convert microseconds from signed int to float */ - or.u r4, r0, hi16(_cycles_per_microsecond) - ld.d r4, r4, lo16(_cycles_per_microsecond) - fmul.ssd r6, r3, r4 /* convert microseconds to cycles */ - int.ss r7, r6 /* convert cycles from float to signed int */ - subu r7, r7, 25 /* subtract for overhead of above instruction */ - - /* now loop for the given number of cycles */ - pause_loop: - bcnd.n gt0, r7, pause_loop - subu r7, r7, 2 /* two cycles per iteration */ - - jmp r1 /* return */ - -#if 0 -/* - * void switch_to_shutdown_context(thread_t thread, - * void (*routine)(processor_t), - * processor_t processor) - * - * saves the kernel context of the thread, - * switches to the interrupt stack, - * continues the thread (with thread_dispatch), - * then runs routine on the interrupt stack. - * - */ - -ENTRY(switch_to_shutdown_context) -/* call save_context to save the thread state */ - subu r31, r31, 40 - or r25, r3, r0 /* save arguments */ - or r24, r4, r0 - bsr.n _save_context - st r1, r31, 36 - addu r31, r31, 40 - ldcr r10, SR0 /* r10 <- current_thread() */ - st r31, r10, THREAD_KERNEL_STACK /* save stack pointer */ - st r0, r10, THREAD_SWAP_FUNC /* null continuation */ - ldcr r11, SR1 - mak r11, r11, FLAG_CPU_FIELD_WIDTH<0> /* r1 = cpu # */ - or r12, r12, lo16(_interrupt_stack) - ld r31, r12 [r11] - addu r31, r31, INTSTACK_SIZE /* end of stack */ - clr r31, r31, 3<0> /* round down to 8-byte boundary */ - /* save the thread; switched to the interrupt stack; now call thread - dispatch to get rid of this thread */ - or r2, r10, r0 - bsr.n _thread_dispatch - subu r31, r31, 40 - /* call the continuation routine */ - jsr.n r25 - or r2, r24, r0 - /* panic if here */ - or.u r2, r0, hi16(1f) - bsr.n _panic - or r2, r2, lo16(1f) -1: - string "switch_to_shutdown_context" -#endif /* 0 */ diff --git a/sys/arch/mvme88k/mvme88k/locore2.c b/sys/arch/mvme88k/mvme88k/locore2.c deleted file mode 100644 index d1b72d698a3..00000000000 --- a/sys/arch/mvme88k/mvme88k/locore2.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (c) 1992, 1993 - * The Regents of the University of California. All rights reserved. - * - * This software was developed by the Computer Systems Engineering group - * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and - * contributed to Berkeley. - * - * All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Lawrence Berkeley Laboratory. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)locore2.c 8.4 (Berkeley) 12/10/93 - * - * from: Header: locore2.c,v 1.8 92/11/26 03:05:01 mccanne Exp (LBL) - * $Id: locore2.c,v 1.2 1996/11/23 23:19:43 kstailey Exp $ - */ - -/* - * Primitives which are in locore.s on other machines, - * but which have no reason to be assembly-coded on SPARC. - */ - -#include <sys/param.h> -#include <sys/proc.h> -#include <sys/resourcevar.h> - -int whichqs; - -/* - * Put process p on the run queue indicated by its priority. - * Calls should be made at splstatclock(), and p->p_stat should be SRUN. - */ -void -setrunqueue(p) - register struct proc *p; -{ - register struct prochd *q; - register struct proc *oldlast; - register int which = p->p_priority >> 2; - - if (p->p_back != NULL) - panic("setrunqueue"); - q = &qs[which]; - whichqs |= 1 << which; - p->p_forw = (struct proc *)q; - p->p_back = oldlast = q->ph_rlink; - q->ph_rlink = p; - oldlast->p_forw = p; -} - -/* - * Remove process p from its run queue, which should be the one - * indicated by its priority. Calls should be made at splstatclock(). - */ -remrunqueue(p) - register struct proc *p; -{ - register int which = p->p_priority >> 2; - register struct prochd *q; - - if ((whichqs & (1 << which)) == 0) - panic("remrunqueue"); - p->p_forw->p_back = p->p_back; - p->p_back->p_forw = p->p_forw; - p->p_back = NULL; - q = &qs[which]; - if (q->ph_link == (struct proc *)q) - whichqs &= ~(1 << which); -} diff --git a/sys/arch/mvme88k/mvme88k/locore_asm_routines.S b/sys/arch/mvme88k/mvme88k/locore_asm_routines.S deleted file mode 100644 index 73ac642a3d3..00000000000 --- a/sys/arch/mvme88k/mvme88k/locore_asm_routines.S +++ /dev/null @@ -1,1668 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1992 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ -/* locore_asm_routines.c - * - ********************************************************************** - * This file created by Omron Corporation, 1990. - * - * HISTORY - * - **************************************************************RCS*****/ - -#ifndef ASSEMBLER -# define ASSEMBLER -#endif - -#include <machine/asm.h> -#include <machine/locore.h> -#include <machine/trap.h> -#include <machine/board.h> -#include <sys/errno.h> - - -#undef ENTRY /* don't want anything to do with a G?PROF ENTRY() */ -#ifdef __STDC__ -# define ENTRY(name) align 4 NEWLINE _ ## name: global _ ## name -#else -# define ENTRY(name) align 4 NEWLINE _/**/name: global _/**/name -#endif - - -/***************************************************************************** - * DO_LOAD_ADDRESS - * - * unsigned int do_load_word(address, supervisor_mode) - * vm_offset_t address; \\ in r2 - * boolean_t supervisor_mode; \\ in r3 - * - * Return the word at ADDRESS (from user space if SUPERVISOR_MODE is zero, - * supervisor space if non-zero). - * - */ - -ENTRY(do_load_word) /* do_load_word(address, supervisor) */ - bcnd ne0,r3,1f -#if ERRATA__XXX_USR - NOP - ld.usr r2,r2,r0 - NOP - NOP - NOP -#else - ld.usr r2,r2,r0 -#endif - br 2f -1: ld r2,r2,r0 -2: jmp r1 - -ENTRY(do_load_half) /* do_load_half(address, supervisor) */ - bcnd ne0,r3,1f -#if ERRATA__XXX_USR - NOP - ld.h.usr r2,r2,r0 - NOP - NOP - NOP -#else - ld.h.usr r2,r2,r0 -#endif - br 2f -1: ld.h r2,r2,r0 -2: jmp r1 - -ENTRY(do_load_byte) /* do_load_byte(address, supervisor) */ - bcnd ne0,r3,1f -#if ERRATA__XXX_USR - NOP - ld.b.usr r2,r2,r0 - NOP - NOP - NOP -#else - ld.b.usr r2,r2,r0 -#endif - br 2f -1: ld.b r2,r2,r0 -2: jmp r1 - -ENTRY(do_store_word) /* do_store_word(address, data, supervisor) */ - bcnd ne0,r4,1f -#if ERRATA__XXX_USR - NOP - st.usr r3,r2,r0 - NOP - NOP - NOP -#else - st.usr r3,r2,r0 -#endif - br 2f -1: st r3,r2,r0 -2: jmp r1 - -ENTRY(do_store_half) /* do_store_half(address, data, supervisor) */ - bcnd ne0,r4,1f -#if ERRATA__XXX_USR - NOP - st.h.usr r3,r2,r0 - NOP - NOP - NOP -#else - st.h.usr r3,r2,r0 -#endif - br 2f -1: st.h r3,r2,r0 -2: jmp r1 - -ENTRY(do_store_byte) /* do_store_byte(address, data, supervisor) */ - bcnd ne0,r4,1f -#if ERRATA__XXX_USR - NOP - st.b.usr r3,r2,r0 - NOP - NOP - NOP -#else - st.b.usr r3,r2,r0 -#endif - br 2f -1: st.b r3,r2,r0 -2: jmp r1 - -ENTRY(do_xmem_word) /* do_xmem_word(address, data, supervisor) */ - bcnd ne0,r4,1f -#if ERRATA__XXX_USR - NOP - xmem.usr r3,r2,r0 - NOP - NOP - NOP -#else - xmem.usr r3,r2,r0 -#endif - br 2f -1: xmem r3,r2,r0 -2: jmp r1 - -ENTRY(do_xmem_byte) /* do_xmem_byte(address, data, supervisor) */ - bcnd ne0,r4,1f -#if ERRATA__XXX_USR - NOP - xmem.bu.usr r3,r2,r0 - NOP - NOP - NOP -#else - xmem.bu.usr r3,r2,r0 -#endif - br 2f -1: xmem.bu r3,r2,r0 -2: jmp r1 - -/************************************************************************* - ************************************************************************* - ** - ** void enable_interrupt(void) - ** - ** Enables processor interrupts (for the executing cpu). - **/ -#undef enable_interrupt -ENTRY(enable_interrupt) - ldcr r2, PSR - clr r2, r2, 1<PSR_INTERRUPT_DISABLE_BIT> - stcr r2, PSR - FLUSH_PIPELINE - jmp r1 - -#if DDB -/* a version of enable_interrupt for the debugger; should never - have breakpoints set it in. Keep it consistent with enable - interrupt above */ -ENTRY(db_enable_interrupt) - ldcr r2, PSR - clr r2, r2, 1<PSR_INTERRUPT_DISABLE_BIT> - stcr r2, PSR - FLUSH_PIPELINE - jmp r1 -#endif /* DDB */ - -/************************************************************************* - ************************************************************************* - ** - ** unsigned long disable_interrupt(void) - ** - ** Disables processor interrupts (for the executing CPU) and returns - ** the *previous* PSR. - ** - ** if ((oldPSR & 0x02) == 0) - ** interrupts_were_previously_on = 1; - **/ -#undef disable_interrupt -ENTRY(disable_interrupt) - ldcr r2, PSR - set r3, r2, 1<PSR_INTERRUPT_DISABLE_BIT> /* set disable bit*/ - stcr r3, PSR - FLUSH_PIPELINE - jmp r1 - -/* a version of disable_interrupt for the kernel debugger. Should never - have breakpoints set in it. Make sure it stays consistent with - disable_interrupt */ - -#if DDB -ENTRY(db_disable_interrupt) - ldcr r2, PSR - set r3, r2, 1<PSR_INTERRUPT_DISABLE_BIT> /* set disable bit*/ - stcr r3, PSR - FLUSH_PIPELINE - jmp r1 -#endif /* DDB */ - -/* version for the debugger */ - -#if DDB - -ENTRY(db_are_interrupts_disabled) - ldcr r2, PSR /* get the processor status word */ - set r3, r0, 1<PSR_INTERRUPT_DISABLE_BIT> /* set mask */ - jmp.n r1 /* delayed return */ - and r2, r2, r3 /* r2 = r3 & r2 */ -#endif /* DDB */ - -LABEL(_FAULT_ERROR) - or r2,r0,1 /* bad copy */ - jmp r1 - -;LABEL(_ALLOW_FAULT_START) - -/* - * Fetch from user space - * r2 == address in user space - */ - -ENTRY(fuword) -ENTRY(fuiword) - or.u r5, r0, hi16(_curpcb) - ld r6, r5, lo16(_curpcb) - or.u r5, r0, hi16(fusu_fault) - or r5, r5, lo16(fusu_fault) - st r5, r6, PCB_ONFAULT ; pcb_onfault = fusu_fault -#if ERRATA__XXX_USR - NOP - ld.usr r5, r0, r2 - NOP - NOP - NOP -#else - ld.usr r5, r0, r2 -#endif - or r2, r0, r5 - br fusu_ret -fusu_fault: - subu r2, r0, 1 -fusu_ret: - or.u r5, r0, hi16(_curpcb) - ld r6, r5, lo16(_curpcb) - st r0, r6, PCB_ONFAULT ; pcb_onfault = 0 - - jmp r1 - -ENTRY(fusword) - or.u r5, r0, hi16(_curpcb) - ld r6, r5, lo16(_curpcb) - or.u r5, r0, hi16(fusu_fault) - or r5, r5, lo16(fusu_fault) - st r5, r6, PCB_ONFAULT ; pcb_onfault = fusu_fault -#if ERRATA__XXX_USR - NOP - ld.h.usr r5, r0, r2 - NOP - NOP - NOP -#else - ld.h.usr r5, r0, r2 -#endif - or r2, r0, r5 - br fusu_ret - -ENTRY(fubyte) -ENTRY(fuibyte) - or.u r5, r0, hi16(_curpcb) - ld r6, r5, lo16(_curpcb) - or.u r5, r0, hi16(fusu_fault) - or r5, r5, lo16(fusu_fault) - st r5, r6, PCB_ONFAULT ; pcb_onfault = fusu_fault -#if ERRATA__XXX_USR - NOP - ld.b.usr r5, r0, r2 - NOP - NOP - NOP -#else - ld.b.usr r5, r0, r2 -#endif - or r2, r0, r5 - br fusu_ret - -ENTRY(fuswintr) - or.u r5, r0, hi16(_curpcb) - ld r6, r5, lo16(_curpcb) - or.u r5, r0, hi16(_fubail) - or r5, r5, lo16(_fubail) - st r5, r6, PCB_ONFAULT ; pcb_onfault = fubail -#if ERRATA__XXX_USR - NOP - ld.h.usr r5, r2, r0 - NOP - NOP - NOP -#else - ld.h.usr r5, r2, r0 -#endif - or r2, r0, r5 - br fusu_ret - -ENTRY(fubail) - subu r2, r0, 1 - br fusu_ret - -/* - * store to user space. - * r2 == address in user space - * r3 == byte/short/word - */ - -ENTRY(suword) -ENTRY(suiword) - or.u r5, r0, hi16(_curpcb) - ld r6, r5, lo16(_curpcb) - or.u r5, r0, hi16(fusu_fault) - or r5, r5, lo16(fusu_fault) - st r5, r6, PCB_ONFAULT ; pcb_onfault = fusu_fault -#if ERRATA__XXX_USR - NOP - st.usr r3, r2, r0 - NOP - NOP - NOP -#else - st.usr r3, r2, r0 -#endif - or r2, r0, r0 /* return success */ - br fusu_ret - -ENTRY(susword) - or.u r5, r0, hi16(_curpcb) - ld r6, r5, lo16(_curpcb) - or.u r5, r0, hi16(fusu_fault) - or r5, r5, lo16(fusu_fault) - st r5, r6, PCB_ONFAULT ; pcb_onfault = fusu_fault -#if ERRATA__XXX_USR - NOP - st.h.usr r3, r2, r0 - NOP - NOP - NOP -#else - st.h.usr r3, r2, r0 -#endif - or r2, r0, r0 /* return success */ - br fusu_ret - -ENTRY(subyte) -ENTRY(suibyte) - or.u r5, r0, hi16(_curpcb) - ld r6, r5, lo16(_curpcb) - or.u r5, r0, hi16(fusu_fault) - or r5, r5, lo16(fusu_fault) - st r5, r6, PCB_ONFAULT ; pcb_onfault = fusu_fault -#if ERRATA__XXX_USR - NOP - st.b.usr r3, r2, r0 - NOP - NOP - NOP -#else - st.b.usr r3, r2, r0 -#endif - or r2, r0, r0 /* return success */ - br fusu_ret - -ENTRY(suswintr) - or.u r5, r0, hi16(_curpcb) - ld r6, r5, lo16(_curpcb) - or.u r5, r0, hi16(_subail) - or r5, r5, lo16(_subail) - st r5, r6, PCB_ONFAULT ; pcb_onfault = subail -#if ERRATA__XXX_USR - NOP - st.h.usr r3, r2, r0 - NOP - NOP - NOP -#else - st.h.usr r3, r2, r0 -#endif - or r2, r0, r0 /* return success */ - br fusu_ret - -ENTRY(subail) - subu r2, r0, 1 - br fusu_ret - -#if 0 -/* - * copystr(fromaddr, toaddr, maxlength, &lencopied) - * - * Copy a null terminated string from one point to another in - * the kernel address space. - * NOTE: maxlength must be < 64K - */ -ENTRY(copystr) - movl sp@(4),a0 | a0 = fromaddr - movl sp@(8),a1 | a1 = toaddr - moveq #0,d0 - movw sp@(14),d0 | d0 = maxlength - jlt Lcsflt1 | negative count, error - jeq Lcsdone | zero count, all done - subql #1,d0 | set up for dbeq -Lcsloop: - movb a0@+,a1@+ | copy a byte - dbeq d0,Lcsloop | if !null and more, continue - jne Lcsflt2 | ran out of room, error - moveq #0,d0 | got a null, all done -Lcsdone: - tstl sp@(16) | return length desired? - jeq Lcsret | no, just return - subl sp@(4),a0 | determine how much was copied - movl sp@(16),a1 | return location - movl a0,a1@ | stash it -Lcsret: - rts -Lcsflt1: - moveq #EFAULT,d0 | copy fault - jra Lcsdone -Lcsflt2: - moveq #ENAMETOOLONG,d0 | ran out of space - jra Lcsdone - -#endif /* 0 */ - jmp r1 -/* - * Copy specified amount of data from user space into the kernel - * copyin(from, to, len) - * r2 == from (user source address) - * r3 == to (kernel destination address) - * r4 == length - * (r1=return addr) - */ - -#define SRC r2 -#define DEST r3 -#define LEN r4 - -ENTRY(copyin) - /* set up fault handler */ - or.u r5, r0, hi16(_curpcb) - ld r6, r5, lo16(_curpcb) - or.u r5, r0, hi16(.Lciflt) - or r5, r5, lo16(.Lciflt) - st r5, r6, PCB_ONFAULT ; pcb_onfault = .Lciflt - - ;bcnd ne0, LEN, 1f ; XXX optimize len = 0 case - ;or r2, r0, 0 - ;br .Lcidone - ;1: ;bcnd lt0, LEN, .Lciflt ; EFAULT if len < 0 - - /* If it's a small length (less than 8), then do byte-by-byte */ - cmp r9, LEN, 8 - bb1 lt, r9, copyin_byte_only - - /* If they're not aligned similiarly, use byte only... */ - xor r9, SRC, DEST - mask r8, r9, 0x3 - bcnd ne0, r8, copyin_byte_only - - /* - * At this point, we don't know if they're word aligned or not, - * but we know that what needs to be done to one to align - * it is what's needed for the other. - */ - bb1 0, SRC, copyin_left_align_to_halfword -copyin_left_aligned_to_halfword: - bb1 1, SRC, copyin_left_align_to_word -copyin_left_aligned_to_word: - bb1 0, LEN, copyin_right_align_to_halfword -copyin_right_aligned_to_halfword: - bb1 1, LEN, copyin_right_align_to_word -copyin_right_aligned_to_word: - - /* At this point, both SRC and DEST are aligned to a word */ - /* boundry, and LEN is an even multiple of 4. */ - bb1.n 2, LEN, copyin_right_align_to_doubleword - or r7, r0, 4 - -copyin_right_aligned_to_doubleword: -#if ERRATA__XXX_USR - NOP - ld.usr r5, SRC, r0 - NOP - NOP - NOP - ld.usr r6, SRC, r7 - NOP - NOP - NOP -#else - ld.usr r5, SRC, r0 - ld.usr r6, SRC, r7 -#endif - subu LEN, LEN, 8 - st r5, DEST, r0 - addu SRC, SRC, 8 - st r6, DEST, r7 - bcnd.n ne0, LEN, copyin_right_aligned_to_doubleword - addu DEST, DEST, 8 - or r2, r0, r0 /* successful return */ - br .Lcidone - - /***************************************************/ - -copyin_left_align_to_halfword: -#if ERRATA__XXX_USR - NOP - ld.b.usr r5, SRC, r0 - NOP - NOP - NOP -#else - ld.b.usr r5, SRC, r0 -#endif - subu LEN, LEN, 1 - st.b r5, DEST, r0 - addu SRC, SRC, 1 - br.n copyin_left_aligned_to_halfword - addu DEST, DEST, 1 - -copyin_left_align_to_word: -#if ERRATA__XXX_USR - NOP - ld.h.usr r5, SRC, r0 - NOP - NOP - NOP -#else - ld.h.usr r5, SRC, r0 -#endif - subu LEN, LEN, 2 - st.h r5, DEST, r0 - addu SRC, SRC, 2 - br.n copyin_left_aligned_to_word - addu DEST, DEST, 2 - -copyin_right_align_to_halfword: - subu LEN, LEN, 1 -#if ERRATA__XXX_USR - NOP - ld.b.usr r5, SRC, LEN - NOP - NOP - NOP -#else - ld.b.usr r5, SRC, LEN -#endif - br.n copyin_right_aligned_to_halfword - st.b r5, DEST, LEN - -copyin_right_align_to_word: - subu LEN, LEN, 2 -#if ERRATA__XXX_USR - NOP - ld.h.usr r5, SRC, LEN - NOP - NOP - NOP -#else - ld.h.usr r5, SRC, LEN -#endif - br.n copyin_right_aligned_to_word - st.h r5, DEST, LEN - -copyin_right_align_to_doubleword: - subu LEN, LEN, 4 -#if ERRATA__XXX_USR - NOP - ld.usr r5, SRC, LEN - NOP - NOP - NOP -#else - ld.usr r5, SRC, LEN -#endif - bcnd.n ne0, LEN, copyin_right_aligned_to_doubleword - st r5, DEST, LEN - or r2, r0, r0 /* successful return */ - br .Lcidone - -copyin_byte_only: - bcnd eq0, LEN, 2f - 1: - subu LEN, LEN, 1 -#if ERRATA__XXX_USR - NOP - ld.b.usr r5, SRC, LEN - NOP - NOP - NOP -#else - ld.b.usr r5, SRC, LEN -#endif - bcnd.n ne0, LEN, 1b - st.b r5, DEST, LEN - 2: or r2, r0, r0 /* successful return */ - br .Lcidone -.Lcidone: - or.u r5,r0,hi16(_curpcb) - ld r6,r5,lo16(_curpcb) - st r0,r6,PCB_ONFAULT - jmp r1 -.Lciflt: - or r2, r0, EFAULT /* return fault */ - br .Lcidone - -#undef SRC -#undef DEST -#undef LEN -/*######################################################################*/ -/*######################################################################*/ - -/* - * Copy a null terminated string from the user space to the kernel - * address space. - * - * copyinstr(from, to, maxlen, &lencopied) - * r2 == from - * r3 == to - * r4 == maxlen - * r5 == len actually transferred - * r6 & r7 - used as temporaries - */ -#define SRC r2 -#define DEST r3 -#define CNT r4 -#define LEN r5 - -ENTRY(copyinstr) - /* setup fault handler */ - or.u r6, r0, hi16(_curpcb) - ld r7, r6, lo16(_curpcb) - or.u r6, r0, hi16(.Lcisflt) - or r6, r6, lo16(.Lcisflt) - st r6, r7, PCB_ONFAULT - bcnd lt0, CNT, .Lcisflt - bcnd eq0, CNT, .Lcisdone - or r6, r0, 0 - 1: -#if ERRATA__XXX_USR - NOP - ld.bu.usr r7, SRC, r6 - NOP - NOP - NOP -#else - ld.bu.usr r7, SRC, r6 -#endif - st.b r7, DEST, r6 - bcnd eq0, r7, 2f ; all done - addu r6, r6, 1 - cmp r7, r6, CNT - bb1 lt, r7, 1b - or r2, r0, ENAMETOOLONG ; over flow - br .Lcisdone - 2: ; all done - or r2, r0, 0 - br .Lcisdone - -.Lcisdone: - bcnd eq0, LEN, 3f - st r6, r0, LEN - 3: or.u r5,r0,hi16(_curpcb) - ld r6,r5,lo16(_curpcb) - st r0,r6,PCB_ONFAULT /* clear the handler */ - jmp r1 -.Lcisflt: - or r2, r0, EFAULT /* return fault */ - br .Lcisdone - -#undef SRC -#undef DEST -#undef CNT -#undef LEN - -/* - * Copy specified amount of data from kernel to the user space - * Copyout(from, to, len) - * r2 == from (kernel source address) - * r3 == to (user destination address) - * r4 == length - */ - -#define SRC r2 -#define DEST r3 -#define LEN r4 - -ENTRY(copyout) - /* setup fault handler */ - or.u r5, r0, hi16(_curpcb) - ld r6, r5, lo16(_curpcb) - or.u r5, r0, hi16(.Lcoflt) - or r5, r5, lo16(.Lcoflt) - st r5, r6, PCB_ONFAULT ; pcb_onfault = .Lcoflt - ;bcnd ne0, LEN, 1f ; XXX optimize len = 0 case - ;or r2, r0, 0 - ;br .Lcodone - ;1: ;bcnd lt0, LEN, .Lcoflt ; EFAULT if len < 0 - /* If it's a small length (less than 8), then do byte-by-byte */ - cmp r9, LEN, 8 - bb1 lt, r9, copyout_byte_only - - /* If they're not aligned similiarly, use byte only... */ - xor r9, SRC, DEST - mask r8, r9, 0x3 - bcnd ne0, r8, copyout_byte_only - - /* - * At this point, we don't know if they're word aligned or not, - * but we know that what needs to be done to one to align - * it is what's needed for the other. - */ - bb1 0, SRC, copyout_left_align_to_halfword -copyout_left_aligned_to_halfword: - bb1 1, SRC, copyout_left_align_to_word -copyout_left_aligned_to_word: - bb1 0, LEN, copyout_right_align_to_halfword -copyout_right_aligned_to_halfword: - bb1 1, LEN, copyout_right_align_to_word -copyout_right_aligned_to_word: - - /* - * At this point, both SRC and DEST are aligned to a word - * boundry, and LEN is an even multiple of 4. - */ - bb1.n 2, LEN, copyout_right_align_to_doubleword - or r7, r0, 4 - -copyout_right_aligned_to_doubleword: - ld r5, SRC, r0 - ld r6, SRC, r7 - subu LEN, LEN, 8 -#if ERRATA__XXX_USR - NOP - st.usr r5, DEST, r0 - NOP - NOP - NOP -#else - st.usr r5, DEST, r0 -#endif - addu SRC, SRC, 8 -#if ERRATA__XXX_USR - NOP - st.usr r6, DEST, r7 - NOP - NOP - NOP -#else - st.usr r6, DEST, r7 -#endif - bcnd.n ne0, LEN, copyout_right_aligned_to_doubleword - addu DEST, DEST, 8 - or r2, r0, r0 /* successful return */ - br .Lcodone - - /***************************************************/ -copyout_left_align_to_halfword: - ld.b r5, SRC, r0 - subu LEN, LEN, 1 -#if ERRATA__XXX_USR - NOP - st.b.usr r5, DEST, r0 - NOP - NOP - NOP -#else - st.b.usr r5, DEST, r0 -#endif - addu SRC, SRC, 1 - br.n copyout_left_aligned_to_halfword - addu DEST, DEST, 1 - -copyout_left_align_to_word: - ld.h r5, SRC, r0 - subu LEN, LEN, 2 -#if ERRATA__XXX_USR - NOP - st.h.usr r5, DEST, r0 - NOP - NOP - NOP -#else - st.h.usr r5, DEST, r0 -#endif - addu SRC, SRC, 2 - br.n copyout_left_aligned_to_word - addu DEST, DEST, 2 - -copyout_right_align_to_halfword: - subu LEN, LEN, 1 - ld.b r5, SRC, LEN -#if ERRATA__XXX_USR - NOP - st.b.usr r5, DEST, LEN - NOP - NOP - NOP - br copyout_right_aligned_to_halfword -#else - br.n copyout_right_aligned_to_halfword - st.b.usr r5, DEST, LEN -#endif - -copyout_right_align_to_word: - subu LEN, LEN, 2 - ld.h r5, SRC, LEN -#if ERRATA__XXX_USR - NOP - st.h.usr r5, DEST, LEN - NOP - NOP - NOP - br copyout_right_aligned_to_word -#else - br.n copyout_right_aligned_to_word - st.h.usr r5, DEST, LEN -#endif - -copyout_right_align_to_doubleword: - subu LEN, LEN, 4 - ld r5, SRC, LEN -#if ERRATA__XXX_USR - NOP - st.usr r5, DEST, LEN - NOP - NOP - NOP - bcnd ne0, LEN, copyout_right_aligned_to_doubleword -#else - bcnd.n ne0, LEN, copyout_right_aligned_to_doubleword - st.usr r5, DEST, LEN -#endif - or r2, r0, r0 /* successful return */ - br .Lcodone - -_LABEL(copyout_byte_only) - bcnd eq0, LEN, 2f - 1: - subu LEN, LEN, 1 - ld.b r5, SRC, LEN -#if ERRATA__XXX_USR - NOP - st.b.usr r5, DEST, LEN - NOP - NOP - NOP - bcnd ne0, LEN, 1b -# else - bcnd.n ne0, LEN, 1b - st.b.usr r5, DEST, LEN -# endif - - 2: or r2, r0, r0 /* successful return */ - br .Lcodone - -.Lcodone: - or.u r5,r0,hi16(_curpcb) - ld r6,r5,lo16(_curpcb) - st r0,r6,PCB_ONFAULT /* clear the handler */ - jmp r1 -.Lcoflt: - or r2, r0, EFAULT /* return fault */ - br .Lcodone - -#undef SRC -#undef DEST -#undef LEN - -/* - * Copy a null terminated string from the kernel space to the user - * address space. - * - * copyoutstr(from, to, maxlen, &lencopied) - * r2 == from - * r3 == to - * r4 == maxlen that can be copied - * r5 == len actually copied - */ - -#define SRC r2 -#define DEST r3 -#define CNT r4 -#define LEN r5 - -ENTRY(copyoutstr) - /* setup fault handler */ - or.u r6, r0, hi16(_curpcb) - ld r7, r6, lo16(_curpcb) - or.u r6, r0, hi16(.Lcosflt) - or r6, r6, lo16(.Lcosflt) - st r6, r7, PCB_ONFAULT - bcnd lt0, CNT, .Lcosflt - bcnd eq0, CNT, .Lcosdone - or r6, r0, 0 - 1: - ld.bu r7, SRC, r6 -#if ERRATA__XXX_USR - NOP - st.b.usr r7, DEST, r6 - NOP - NOP - NOP -#else - st.b.usr r7, DEST, r6 -#endif - bcnd eq0, r7, 2f ; all done - addu r6, r6, 1 - cmp r7, r6, CNT - bb1 lt, r7, 1b - or r2, r0, ENAMETOOLONG ; over flow - br .Lcosdone - 2: ; all done - or r2, r0, 0 - br .Lcosdone - -.Lcosflt: - or r2, r0, EFAULT /* return fault */ - br .Lcosdone - -.Lcosdone: - bcnd eq0, LEN, 3f - st r6, r0, LEN - 3: or.u r5,r0,hi16(_curpcb) - ld r6,r5,lo16(_curpcb) - st r0,r6,PCB_ONFAULT /* clear the handler */ - jmp r1 - -#undef SRC -#undef DEST -#undef CNT -#undef LEN - -/*######################################################################*/ -;LABEL(_ALLOW_FAULT_END) -;word 0 /* to separate from routine below */ -/*######################################################################*/ - -/* - * Gcc 2 generates calls to memcpy for bcopies of unknown size. memcpy - * can simply be implemented as ovbcopy but the src (r2, r3) and dst args need to - * be switched. - */ -/* - * void memcpy(dest, source, count) - * - */ -ENTRY(memcpy) - or r5, r0, r2 /* dst -> tmp */ - or r2, r0, r3 /* src -> 1st arg */ - br.n _ovbcopy /* call ovbcopy */ - or r3, r0, r5 /* dst -> 2nd arg */ - - -/* - * void bcopy(source, destination, count) - * - * copy count bytes of data from source to destination - * Don Harper (don@omron.co.jp), Omron Corporation. - * - */ - -ENTRY(bcopy) -ENTRY(ovbcopy) - bcnd le0,r4,bcopy_out /* nothing to do if count <= 0 */ -/* - * check position of source and destination data - */ - cmp r9,r2,r3 /* compare source address to destination */ - bb1 eq,r9,bcopy_out /* nothing to do if addresses are equal */ - bb1 lo,r9,bcopy_reverse /* copy in reverse if src < destination */ -/* - * source address is greater than destination address, copy forward - */ - cmp r9,r4,16 /* see if we have at least 16 bytes */ - bb1 lt,r9,f_byte_copy /* copy bytes for small data length */ -/* - * determine copy strategy based on alignment of source and destination - */ - mask r6,r2,3 /* get 2 low order bits of source address */ - mask r7,r3,3 /* get 2 low order bits of destintation addr */ - mak r6,r6,0<4> /* convert source bits to table offset */ - mak r7,r7,0<2> /* convert destination bits to table offset */ - or.u r12,r0,hi16(f_strat) /* forward strategy table address (high) */ - or r12,r12,lo16(f_strat) /* forward strategy table address (low) */ - addu r6,r6,r7 /* compute final table offset for strategy */ - ld r12,r12,r6 /* load the strategy routine */ - jmp r12 /* branch to strategy routine */ - - -/* - * Copy three bytes from src to destination then copy words - */ -_LABEL(f_3byte_word_copy) - ld.bu r6,r2,0 /* load byte from source */ - ld.bu r7,r2,1 /* load byte from source */ - ld.bu r8,r2,2 /* load byte from source */ - st.b r6,r3,0 /* store byte to destination */ - st.b r7,r3,1 /* store byte to destination */ - st.b r8,r3,2 /* store byte to destination */ - addu r2,r2,3 /* increment source pointer */ - addu r3,r3,3 /* increment destination pointer */ - br.n f_word_copy /* copy full words */ - subu r4,r4,3 /* decrement length */ - -/* - * Copy 1 halfword from src to destination then copy words - */ -_LABEL(f_1half_word_copy) - ld.hu r6,r2,0 /* load half-word from source */ - st.h r6,r3,0 /* store half-word to destination */ - addu r2,r2,2 /* increment source pointer */ - addu r3,r3,2 /* increment destination pointer */ - br.n f_word_copy /* copy full words */ - subu r4,r4,2 /* decrement remaining length */ - -/* - * Copy 1 byte from src to destination then copy words - */ -_LABEL(f_1byte_word_copy) - ld.bu r6,r2,0 /* load 1 byte from source */ - st.b r6,r3,0 /* store 1 byte to destination */ - addu r2,r2,1 /* increment source pointer */ - addu r3,r3,1 /* increment destination pointer */ - subu r4,r4,1 /* decrement remaining length */ - /* fall through to word copy */ -/* - * Copy as many full words as possible, 4 words per loop - */ -_LABEL(f_word_copy) - cmp r10,r4,16 /* see if we have 16 bytes remaining */ - bb1 lo,r10,f_byte_copy /* not enough left, copy bytes */ - ld r6,r2,0 /* load first word */ - ld r7,r2,4 /* load second word */ - ld r8,r2,8 /* load third word */ - ld r9,r2,12 /* load fourth word */ - st r6,r3,0 /* store first word */ - st r7,r3,4 /* store second word */ - st r8,r3,8 /* store third word */ - st r9,r3,12 /* store fourth word */ - addu r2,r2,16 /* increment source pointer */ - addu r3,r3,16 /* increment destination pointer */ - br.n f_word_copy /* branch to copy another block */ - subu r4,r4,16 /* decrement remaining length */ - -_LABEL(f_1byte_half_copy) - ld.bu r6,r2,0 /* load 1 byte from source */ - st.b r6,r3,0 /* store 1 byte to destination */ - addu r2,r2,1 /* increment source pointer */ - addu r3,r3,1 /* increment destination pointer */ - subu r4,r4,1 /* decrement remaining length */ - /* fall through to half copy */ - -_LABEL(f_half_copy) - cmp r10,r4,16 /* see if we have 16 bytes remaining */ - bb1 lo,r10,f_byte_copy /* not enough left, copy bytes */ - ld.hu r6,r2,0 /* load first half-word */ - ld.hu r7,r2,2 /* load second half-word */ - ld.hu r8,r2,4 /* load third half-word */ - ld.hu r9,r2,6 /* load fourth half-word */ - ld.hu r10,r2,8 /* load fifth half-word */ - ld.hu r11,r2,10 /* load sixth half-word */ - ld.hu r12,r2,12 /* load seventh half-word */ - ld.hu r13,r2,14 /* load eighth half-word */ - st.h r6,r3,0 /* store first half-word */ - st.h r7,r3,2 /* store second half-word */ - st.h r8,r3,4 /* store third half-word */ - st.h r9,r3,6 /* store fourth half-word */ - st.h r10,r3,8 /* store fifth half-word */ - st.h r11,r3,10 /* store sixth half-word */ - st.h r12,r3,12 /* store seventh half-word */ - st.h r13,r3,14 /* store eighth half-word */ - addu r2,r2,16 /* increment source pointer */ - addu r3,r3,16 /* increment destination pointer */ - br.n f_half_copy /* branch to copy another block */ - subu r4,r4,16 /* decrement remaining length */ - -_LABEL(f_byte_copy) - bcnd eq0,r4,bcopy_out /* branch if nothing left to copy */ - ld.bu r6,r2,0 /* load byte from source */ - st.b r6,r3,0 /* store byte in destination */ - addu r2,r2,1 /* increment source pointer */ - addu r3,r3,1 /* increment destination pointer */ - br.n f_byte_copy /* branch for next byte */ - subu r4,r4,1 /* decrement remaining length */ - -/* - * source address is less than destination address, copy in reverse - */ -_LABEL(bcopy_reverse) -/* - * start copy pointers at end of data - */ - addu r2,r2,r4 /* start source at end of data */ - addu r3,r3,r4 /* start destination at end of data */ -/* - * check for short data - */ - cmp r9,r4,16 /* see if we have at least 16 bytes */ - bb1 lt,r9,r_byte_copy /* copy bytes for small data length */ -/* - * determine copy strategy based on alignment of source and destination - */ - mask r6,r2,3 /* get 2 low order bits of source address */ - mask r7,r3,3 /* get 2 low order bits of destintation addr */ - mak r6,r6,0<4> /* convert source bits to table offset */ - mak r7,r7,0<2> /* convert destination bits to table offset */ - or.u r12,r0,hi16(r_strat) /* reverse strategy table address (high) */ - or r12,r12,lo16(r_strat) /* reverse strategy table address (low) */ - addu r6,r6,r7 /* compute final table offset for strategy */ - ld r12,r12,r6 /* load the strategy routine */ - jmp r12 /* branch to strategy routine */ - -/* - * Copy three bytes from src to destination then copy words - */ -_LABEL(r_3byte_word_copy) - subu r2,r2,3 /* decrement source pointer */ - subu r3,r3,3 /* decrement destination pointer */ - ld.bu r6,r2,0 /* load byte from source */ - ld.bu r7,r2,1 /* load byte from source */ - ld.bu r8,r2,2 /* load byte from source */ - st.b r6,r3,0 /* store byte to destination */ - st.b r7,r3,1 /* store byte to destination */ - st.b r8,r3,2 /* store byte to destination */ - br.n r_word_copy /* copy full words */ - subu r4,r4,3 /* decrement length */ - -/* - * Copy 1 halfword from src to destination then copy words - */ -_LABEL(r_1half_word_copy) - subu r2,r2,2 /* decrement source pointer */ - subu r3,r3,2 /* decrement destination pointer */ - ld.hu r6,r2,0 /* load half-word from source */ - st.h r6,r3,0 /* store half-word to destination */ - br.n r_word_copy /* copy full words */ - subu r4,r4,2 /* decrement remaining length */ - -/* - * Copy 1 byte from src to destination then copy words - */ -_LABEL(r_1byte_word_copy) - subu r2,r2,1 /* decrement source pointer */ - subu r3,r3,1 /* decrement destination pointer */ - ld.bu r6,r2,0 /* load 1 byte from source */ - st.b r6,r3,0 /* store 1 byte to destination */ - subu r4,r4,1 /* decrement remaining length */ - /* fall through to word copy */ -/* - * Copy as many full words as possible, 4 words per loop - */ -_LABEL(r_word_copy) - cmp r10,r4,16 /* see if we have 16 bytes remaining */ - bb1 lo,r10,r_byte_copy /* not enough left, copy bytes */ - subu r2,r2,16 /* decrement source pointer */ - subu r3,r3,16 /* decrement destination pointer */ - ld r6,r2,0 /* load first word */ - ld r7,r2,4 /* load second word */ - ld r8,r2,8 /* load third word */ - ld r9,r2,12 /* load fourth word */ - st r6,r3,0 /* store first word */ - st r7,r3,4 /* store second word */ - st r8,r3,8 /* store third word */ - st r9,r3,12 /* store fourth word */ - br.n r_word_copy /* branch to copy another block */ - subu r4,r4,16 /* decrement remaining length */ - -_LABEL(r_1byte_half_copy) - subu r2,r2,1 /* decrement source pointer */ - subu r3,r3,1 /* decrement destination pointer */ - ld.bu r6,r2,0 /* load 1 byte from source */ - st.b r6,r3,0 /* store 1 byte to destination */ - subu r4,r4,1 /* decrement remaining length */ - /* fall through to half copy */ - -_LABEL(r_half_copy) - cmp r10,r4,16 /* see if we have 16 bytes remaining */ - bb1 lo,r10,r_byte_copy /* not enough left, copy bytes */ - subu r2,r2,16 /* decrement source pointer */ - subu r3,r3,16 /* decrement destination pointer */ - ld.hu r6,r2,0 /* load first half-word */ - ld.hu r7,r2,2 /* load second half-word */ - ld.hu r8,r2,4 /* load third half-word */ - ld.hu r9,r2,6 /* load fourth half-word */ - ld.hu r10,r2,8 /* load fifth half-word */ - ld.hu r11,r2,10 /* load sixth half-word */ - ld.hu r12,r2,12 /* load seventh half-word */ - ld.hu r13,r2,14 /* load eighth half-word */ - st.h r6,r3,0 /* store first half-word */ - st.h r7,r3,2 /* store second half-word */ - st.h r8,r3,4 /* store third half-word */ - st.h r9,r3,6 /* store fourth half-word */ - st.h r10,r3,8 /* store fifth half-word */ - st.h r11,r3,10 /* store sixth half-word */ - st.h r12,r3,12 /* store seventh half-word */ - st.h r13,r3,14 /* store eighth half-word */ - br.n r_half_copy /* branch to copy another block */ - subu r4,r4,16 /* decrement remaining length */ - -_LABEL(r_byte_copy) - bcnd eq0,r4,bcopy_out /* branch if nothing left to copy */ - subu r2,r2,1 /* decrement source pointer */ - subu r3,r3,1 /* decrement destination pointer */ - ld.bu r6,r2,0 /* load byte from source */ - st.b r6,r3,0 /* store byte in destination */ - br.n r_byte_copy /* branch for next byte */ - subu r4,r4,1 /* decrement remaining length */ - -_LABEL(bcopy_out) - jmp r1 /* all done, return to caller */ - - data - align 4 -_LABEL(f_strat) - word f_word_copy - word f_byte_copy - word f_half_copy - word f_byte_copy - word f_byte_copy - word f_3byte_word_copy - word f_byte_copy - word f_1byte_half_copy - word f_half_copy - word f_byte_copy - word f_1half_word_copy - word f_byte_copy - word f_byte_copy - word f_1byte_half_copy - word f_byte_copy - word f_1byte_word_copy - -_LABEL(r_strat) - word r_word_copy - word r_byte_copy - word r_half_copy - word r_byte_copy - word r_byte_copy - word r_1byte_word_copy - word r_byte_copy - word r_1byte_half_copy - word r_half_copy - word r_byte_copy - word r_1half_word_copy - word r_byte_copy - word r_byte_copy - word r_1byte_half_copy - word r_byte_copy - word r_3byte_word_copy - - text - -/*######################################################################*/ -/*######################################################################*/ - -/* - * April 1990, Omron Corporation - * jfriedl@nff.ncl.omron.co.jp - * - * void bzero(destination, length) - * - * Clear (set to zero) LENGTH bytes of memory starting at DESTINATION. - * Note that there is no return value. - * - * This is fast. Really fast. Especially for long lengths. - */ -#define R_dest r2 -#define R_len r3 - -#define R_bytes r4 -#define R_mark_address r5 -#define R_addr r6 /* R_addr && R_temp SHARE */ -#define R_temp r6 /* R_addr && R_temp SHARE */ - - -ENTRY(blkclr) -ENTRY(bzero) - /* - * If the destination is not word aligned, we'll word align - * it first to make things easier. - * - * We'll check to see first if bit #0 is set and then bit #1 - * (of the destination address). If either are set, it's - * not word aligned. - */ - bb1 0, R_dest, not_initially_word_aligned - bb1 1, R_dest, not_initially_word_aligned - - now_word_aligned: - /* - * before we get into the main loop, grab the - * address of the label "mark" below. - */ - or.u R_mark_address, r0, hi16(mark) - or R_mark_address, R_mark_address, lo16(mark) - - top_of_main_loop: -# define MAX_AT_ONE_TIME 128 - /* - * Now we find out how many words we can zero-fill in a row. - * We do this by doing something like: - * - * bytes &= 0xfffffffc; - * if (bytes > MAX_AT_ONE_TIME) - * bytes = MAX_AT_ONE_TIME; - */ - - /* - * Clear lower two bits of length to give us the number of bytes - * ALIGNED TO THE WORD LENGTH remaining to move. - */ - clr R_bytes, R_len, 2<0> - - /* if we're done clearing WORDS, jump out */ - bcnd eq0, R_bytes, done_doing_words - - /* if the number of bytes > MAX_AT_ONE_TIME, do only the max */ - cmp R_temp, R_bytes, MAX_AT_ONE_TIME - bb1 lt, R_temp, 1f - - /* - * Since we're doing the max, we know exactly where we're - * jumping (the first one in the list!), so we can jump - * right there. However, we've still got to adjust - * the length, so we'll jump to where we ajust the length - * which just happens to fall through to the first store zero - * in the list. - * - * Note, however, that we're jumping to an instruction that - * would be in the delay slot for the jump in front of it, - * so if you change things here, WATCH OUT. - */ - br.n do_max - or R_bytes, r0, MAX_AT_ONE_TIME - - 1: - - /* - * Now we have the number of bytes to zero during this iteration, - * (which, as it happens, is the last iteration if we're here). - * We'll calculate the proper place to jump and then jump there, - * after adjusting the length. NOTE that there is a label between - * the "jmp.n" and the "subu" below... the "subu" is NOT always - * executed in the delay slot of the "jmp.n". - */ - subu R_addr, R_mark_address, R_bytes - - /* and go there (after adjusting the length via ".n") */ - jmp.n R_addr -do_max: subu R_len, R_len, R_bytes /* NOTE: this is in the delay slot! */ - - st r0, R_dest, 0x7c /* 128 */ - st r0, R_dest, 0x78 /* 124 */ - st r0, R_dest, 0x74 /* 120 */ - st r0, R_dest, 0x70 /* 116 */ - st r0, R_dest, 0x6c /* 112 */ - st r0, R_dest, 0x68 /* 108 */ - st r0, R_dest, 0x64 /* 104 */ - st r0, R_dest, 0x60 /* 100 */ - st r0, R_dest, 0x5c /* 96 */ - st r0, R_dest, 0x58 /* 92 */ - st r0, R_dest, 0x54 /* 88 */ - st r0, R_dest, 0x50 /* 84 */ - st r0, R_dest, 0x4c /* 80 */ - st r0, R_dest, 0x48 /* 76 */ - st r0, R_dest, 0x44 /* 72 */ - st r0, R_dest, 0x40 /* 68 */ - st r0, R_dest, 0x3c /* 64 */ - st r0, R_dest, 0x38 /* 60 */ - st r0, R_dest, 0x34 /* 56 */ - st r0, R_dest, 0x30 /* 52 */ - st r0, R_dest, 0x2c /* 44 */ - st r0, R_dest, 0x28 /* 40 */ - st r0, R_dest, 0x24 /* 36 */ - st r0, R_dest, 0x20 /* 32 */ - st r0, R_dest, 0x1c /* 28 */ - st r0, R_dest, 0x18 /* 24 */ - st r0, R_dest, 0x14 /* 20 */ - st r0, R_dest, 0x10 /* 16 */ - st r0, R_dest, 0x0c /* 12 */ - st r0, R_dest, 0x08 /* 8 */ - st r0, R_dest, 0x04 /* 4 */ - st r0, R_dest, 0x00 /* 0 */ - - mark: - br.n top_of_main_loop - addu R_dest, R_dest, R_bytes /* bump up the dest address */ - - - - done_doing_words: - bcnd ne0, R_len, finish_up_last_bytes - jmp r1 /* RETURN */ - - finish_up_last_bytes: - subu R_len, R_len, 1 - bcnd.n ne0, R_len, finish_up_last_bytes - st.b r0, R_dest, R_len - - leave: - jmp r1 /* RETURN */ - - not_initially_word_aligned: - /* - * Bzero to word-align the address (at least if the length allows it). - */ - bcnd eq0, R_len, leave - st.b r0, R_dest, 0 - addu R_dest, R_dest, 1 - mask R_temp, R_dest, 0x3 - bcnd.n eq0, R_temp, now_word_aligned - subu R_len, R_len, 1 - br not_initially_word_aligned - -#undef R_dest -#undef R_len -#undef R_bytes -#undef R_mark_address -#undef R_addr -#undef R_temp -#undef MAX_AT_ONE_TIME - -/**********************************************************************/ -/**********************************************************************/ -/**********************************************************************/ - -/* - * non-local goto - */ - global _setjmp -_setjmp: - st r1,r2,0 - st r14,r2,4 - st r15,r2,2*4 - st r16,r2,3*4 - st r17,r2,4*4 - st r18,r2,5*4 - st r19,r2,6*4 - st r20,r2,7*4 - st r21,r2,8*4 - st r22,r2,9*4 - st r23,r2,10*4 - st r24,r2,11*4 - st r25,r2,12*4 - st r26,r2,13*4 - st r27,r2,14*4 - st r28,r2,15*4 - st r29,r2,16*4 - st r30,r2,17*4 - st r31,r2,18*4 - jmp.n r1 - or r2,r0,r0 - - global _longjmp -_longjmp: - ld r1,r2,0 - ld r14,r2,4 - ld r15,r2,2*4 - ld r16,r2,3*4 - ld r17,r2,4*4 - ld r18,r2,5*4 - ld r19,r2,6*4 - ld r20,r2,7*4 - ld r21,r2,8*4 - ld r22,r2,9*4 - ld r23,r2,10*4 - ld r24,r2,11*4 - ld r25,r2,12*4 - ld r26,r2,13*4 - ld r27,r2,14*4 - ld r28,r2,15*4 - ld r29,r2,16*4 - ld r30,r2,17*4 - ld r31,r2,18*4 - jmp.n r1 - or r2,r3,r0 - -ENTRY(longjmp_int_enable) - ld r1,r2,0 - ld r14,r2,4 - ld r15,r2,2*4 - ld r16,r2,3*4 - ld r17,r2,4*4 - ld r18,r2,5*4 - ld r19,r2,6*4 - ld r20,r2,7*4 - ld r21,r2,8*4 - ld r22,r2,9*4 - ld r23,r2,10*4 - ld r24,r2,11*4 - ld r25,r2,12*4 - ld r26,r2,13*4 - ld r27,r2,14*4 - ld r28,r2,15*4 - ld r29,r2,16*4 - ld r30,r2,17*4 - ld r31,r2,18*4 - or r2,r3,r0 - ldcr r10,PSR - clr r10,r10,1<PSR_INTERRUPT_DISABLE_BIT> - stcr r10,PSR - jmp r1 - -ENTRY(getsp) - or r2, r0, r31 - jmp r1 - -ENTRY(spln) - ldcr r10,PSR - or r11,r0,r10 - set r10,r10,1<PSR_INTERRUPT_DISABLE_BIT> - stcr r10,PSR - or.u r3,r0,hi16(INT_MASK_LEVEL) - or r4,r3,lo16(INT_MASK_LEVEL) - xmem.bu r2,r4,r0 - stcr r11,PSR - FLUSH_PIPELINE - jmp r1 - -ENTRY(spl) - ldcr r10,PSR - or r11,r0,r10 - set r10,r10,1<PSR_INTERRUPT_DISABLE_BIT> - stcr r10,PSR - or.u r3,r0,hi16(INT_MASK_LEVEL) - ld.b r2,r3,lo16(INT_MASK_LEVEL) - stcr r11,PSR - FLUSH_PIPELINE - jmp r1 - -/* - * invalidate_pte(pte) - * - * This function will invalidate specified pte indivisibly - * to avoid the write-back of used-bit and/or modify-bit into - * that pte. It also returns the pte found in the table. - */ -ENTRY(invalidate_pte) - or r3,r0,r0 - xmem r3,r2,r0 - tb1 0,r0,0 - jmp.n r1 - or r2,r3,r0 - -#if DDB - -ENTRY(db_spln) - ldcr r10,PSR - or r11,r0,r10 - set r10,r10,1<PSR_INTERRUPT_DISABLE_BIT> - stcr r10,PSR - or.u r3,r0,hi16(INT_MASK_LEVEL) - or r4,r3,lo16(INT_MASK_LEVEL) - xmem.bu r2,r4,r0 - stcr r11,PSR - FLUSH_PIPELINE - jmp r1 - -ENTRY(db_spl) - ldcr r10,PSR - or r11,r0,r10 - set r10,r10,1<PSR_INTERRUPT_DISABLE_BIT> - stcr r10,PSR - or.u r3,r0,hi16(INT_MASK_LEVEL) - ld.b r2,r3,lo16(INT_MASK_LEVEL) - stcr r11,PSR - FLUSH_PIPELINE - jmp r1 - -ENTRY(db_flush_pipeline) - FLUSH_PIPELINE - jmp r1 -#endif /* DDB */ - -ENTRY(read_processor_identification_register) - jmp.n r1 - ldcr r2, PID - -#if 0 -/* - * call rom abort (called when non-maskable interrupt detected) - */ -ENTRY(call_rom_abort) - tcnd eq0, r0, EVN_ROM_ABORT /* trap to ROM */ - jmp r1 /* and return */ - -#endif /* 0 */ -;------------------------------------------------------------------------ - -#ifdef JUNK -/* JEFF_DEBUG stuff */ - align 8 -raw_xpr_stack_top: - zero 0x40 -raw_xpr_inital_stack_frame: - zero 0x60 -raw_xpr_stack_bottom: - -user_raw_xpr: global user_raw_xpr - ldcr r5, cr17 - ld r5, r5, THREAD_TASK - /* get a stack ... can use r9 no problem */ - or.u r9, r0, hi16(raw_xpr_inital_stack_frame) - or r9, r9, lo16(raw_xpr_inital_stack_frame) - st r31, r9, 0x38 - st r1, r9, 0x3c - or r31, r9, r0 - bsr __raw_xpr - ld r1, r31, 0x3c - ld r31, r31, 0x38 - rte -;-------------------------------------------------------------- -_raw_xpr: global _raw_xpr - or.u r5, r0, hi16(_kernel_task) - ld r5, r5, lo16(_kernel_task) - br __raw_xpr -#endif /* JUNK */ diff --git a/sys/arch/mvme88k/mvme88k/locore_c_routines.c b/sys/arch/mvme88k/mvme88k/locore_c_routines.c deleted file mode 100644 index 4f07bee8506..00000000000 --- a/sys/arch/mvme88k/mvme88k/locore_c_routines.c +++ /dev/null @@ -1,391 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ -/* - * HISTORY - *****************************************************************RCS**/ -/* This file created by Omron Corporation, 1990. */ - -#include <machine/m88100.h> /* DMT_VALID */ -#include <assym.s> /* EF_NREGS, etc. */ -#include <machine/locore.h> /* END_OF_VECTOR_LIST, etc. */ -#ifdef DDB - #include <ddb/db_output.h> /* db_printf() */ -#endif /* DDB */ - - -#if defined(DDB) && defined(JEFF_DEBUG) -# define DATA_DEBUG 1 -#endif - - -#if DDB -# define DEBUG_MSG db_printf -#else -# define DEBUG_MSG printf -#endif /* DDB */ - -/* - * data access emulation for M88100 exceptions - */ -#define DMT_BYTE 1 -#define DMT_HALF 2 -#define DMT_WORD 4 - -static struct -{ - unsigned char offset; - unsigned char size; -} dmt_en_info[16] = -{ - {0, 0}, {3, DMT_BYTE}, {2, DMT_BYTE}, {2, DMT_HALF}, - {1, DMT_BYTE}, {0, 0}, {0, 0}, {0, 0}, - {0, DMT_BYTE}, {0, 0}, {0, 0}, {0, 0}, - {0, DMT_HALF}, {0, 0}, {0, 0}, {0, DMT_WORD} -}; - -#if DATA_DEBUG - int data_access_emulation_debug = 0; - static char *bytes[] = - { - "____", "___x", "__x_", "__xx", - "_x__", "_x_x", "_xx_", "_xxx", - "x___", "x__x", "x_x_", "x_xx", - "xx__", "xx_x", "xxx_", "xxxx", - }; - #define DAE_DEBUG(stuff) { \ - if ((data_access_emulation_debug != 0) && ( \ - data_access_emulation_debug == 0xffffffff)) { stuff ;} } -#else - #define DAE_DEBUG(stuff) -#endif - -void data_access_emulation(unsigned *eframe) -{ - register int x; - register struct dmt_reg *dmtx; - register unsigned dmax, dmdx; - register unsigned v, reg; - - if (!(eframe[EF_DMT0] & DMT_VALID)) - return; - - for (x = 0; x < 3; x++) - { - dmtx = (struct dmt_reg *)&eframe[EF_DMT0+x*3]; - - if (!dmtx->dmt_valid) - continue; - - dmdx = eframe[EF_DMD0+x*3]; - dmax = eframe[EF_DMA0+x*3]; - - DAE_DEBUG - ( - if (dmtx->dmt_write) - DEBUG_MSG("[DMT%d=%x: st.%c %x to %x as [%s] %s %s]\n", - x, eframe[EF_DMT0+x*3], dmtx->dmt_das ? 's' : 'u', - dmdx, dmax, bytes[dmtx->dmt_en], - dmtx->dmt_doub1 ? "double": "not double", - dmtx->dmt_lockbar ? "xmem": "not xmem"); - else - DEBUG_MSG("[DMT%d=%x: ld.%c r%d<-%x as [%s] %s %s]\n", - x, eframe[EF_DMT0+x*3], dmtx->dmt_das ? 's' : 'u', - dmtx->dmt_dreg, dmax, bytes[dmtx->dmt_en], - dmtx->dmt_doub1 ? "double": "not double", - dmtx->dmt_lockbar ? "xmem": "not xmem"); - ) - - dmax += dmt_en_info[dmtx->dmt_en].offset; - reg = dmtx->dmt_dreg; - - if ( ! dmtx->dmt_lockbar) - { - /* the fault is not during an XMEM */ - - if (x == 2 && dmtx->dmt_doub1) - { - /* pipeline 2 (earliest stage) for a double */ - - if (dmtx->dmt_write) - { - /* STORE DOUBLE WILL BE RE-INITIATED BY rte */ - } - else - { - /* EMULATE ld.d INSTRUCTION */ - v = do_load_word(dmax, dmtx->dmt_das); - if (reg != 0) - eframe[EF_R0 + reg] = v; - v = do_load_word(dmax ^ 4, dmtx->dmt_das); - if (reg != 31) - eframe[EF_R0 + reg + 1] = v; - } - } - else /* not pipeline #2 with a double */ - { - if (dmtx->dmt_write) switch (dmt_en_info[dmtx->dmt_en].size) - { - case DMT_BYTE: - DAE_DEBUG(DEBUG_MSG("[byte %x -> [%x(%c)]\n", - dmdx & 0xff, dmax, dmtx->dmt_das ? 's' : 'u')) - do_store_byte(dmax, dmdx, dmtx->dmt_das); - break; - case DMT_HALF: - DAE_DEBUG(DEBUG_MSG("[half %x -> [%x(%c)]\n", - dmdx & 0xffff, dmax, dmtx->dmt_das ? 's' : 'u')) - do_store_half(dmax, dmdx, dmtx->dmt_das); - break; - case DMT_WORD: - DAE_DEBUG(DEBUG_MSG("[word %x -> [%x(%c)]\n", - dmdx, dmax, dmtx->dmt_das ? 's' : 'u')) - do_store_word(dmax, dmdx, dmtx->dmt_das); - break; - } - else /* else it's a read */ - { - switch (dmt_en_info[dmtx->dmt_en].size) - { - case DMT_BYTE: - v = do_load_byte(dmax, dmtx->dmt_das); - if (!dmtx->dmt_signed) - v &= 0x000000ff; - break; - case DMT_HALF: - v = do_load_half(dmax, dmtx->dmt_das); - if (!dmtx->dmt_signed) - v &= 0x0000ffff; - break; - case DMT_WORD: - default: /* 'default' just to shut up lint */ - v = do_load_word(dmax, dmtx->dmt_das); - break; - } - if (reg == 0) { - DAE_DEBUG(DEBUG_MSG("[no write to r0 done]\n")); - } - else - { - DAE_DEBUG(DEBUG_MSG("[r%d <- %x]\n", - reg, v)); - eframe[EF_R0 + reg] = v; - } - } - } - } - else /* if lockbar is set... it's part of an XMEM */ - { - /* - * According to Motorola's "General Information", - * the dmt_doub1 bit is never set in this case, as it should be. - * They call this "general information" - I call it a f*cking bug! - * - * Anyway, if lockbar is set (as it is if we're here) and if - * the write is not set, then it's the same as if doub1 - * was set... - */ - if ( ! dmtx->dmt_write) - { - if (x != 2) - { - /* RERUN xmem WITH DMD(x+1) */ - x++; - dmdx = eframe[EF_DMD0 + x*3]; - } - else - { - /* RERUN xmem WITH DMD2 */ - } - - if (dmt_en_info[dmtx->dmt_en].size == DMT_WORD) - v = do_xmem_word(dmax, dmdx, dmtx->dmt_das); - else - v = do_xmem_byte(dmax, dmdx, dmtx->dmt_das); - eframe[EF_R0 + reg] = v; - } - else - { - if (x == 0) - { - eframe[EF_R0 + reg] = dmdx; - eframe[EF_SFIP] = eframe[EF_SNIP]; - eframe[EF_SNIP] = eframe[EF_SXIP]; - eframe[EF_SXIP] = 0; - /* xmem RERUN ON rte */ - eframe[EF_DMT0] = 0; - return; - } - } - } - } - eframe[EF_DMT0] = 0; -} - -/* - *********************************************************************** - *********************************************************************** - */ -#define SIGSYS_MAX 501 -#define SIGTRAP_MAX 511 - -#define EMPTY_BR 0xC0000000U /* empty "br" instruction */ -#define NO_OP 0xf4005800U /* "or r0, r0, r0" */ - -typedef struct -{ - unsigned word_one, - word_two; -} m88k_exception_vector_area; - -#define BRANCH(FROM, TO) (EMPTY_BR | ((unsigned)(TO) - (unsigned)(FROM)) >> 2) - -#define SET_VECTOR(NUM, to, VALUE) { \ - unsigned _NUM = (unsigned)(NUM); \ - unsigned _VALUE = (unsigned)(VALUE); \ - vector[_NUM].word_one = NO_OP; \ - vector[_NUM].word_two = BRANCH(&vector[_NUM].word_two, _VALUE); \ -} - - -/* - * vector_init(vector, vector_init_list) - * - * This routine sets up the m88k vector table for the running processor. - * It is called with a very little stack, and interrupts disabled, - * so don't call any other functions! - */ -void vector_init( - m88k_exception_vector_area *vector, - unsigned *vector_init_list) -{ - register unsigned num; - register unsigned vec; - extern void sigsys(), sigtrap(), stepbpt(), userbpt(); - - for (num = 0; (vec = vector_init_list[num]) != END_OF_VECTOR_LIST; num++) - { - if (vec != PREDEFINED_BY_ROM) - SET_VECTOR(num, to, vec); - } - - while (num < 496) - SET_VECTOR(num++, to, sigsys); - num++; /* skip 496, BUG ROM vector */ -#if 0 - while (num <= SIGSYS_MAX) - SET_VECTOR(num++, to, sigsys); - - while (num <= SIGTRAP_MAX) - SET_VECTOR(num++, to, sigtrap); - - SET_VECTOR(504, to, stepbpt); - SET_VECTOR(511, to, userbpt); - vector[496].word_one = 496 * 4; - vector[497].word_two = 497 * 4; -#endif -} - -/* JEFF_DEBUG stuff */ -#include <machine/asm_macro.h> - -#ifdef JUNK -#define MAX_XPR_COUNT 1000 -struct { - task_t task; - char *fmt; - unsigned arg1; - unsigned arg2; -} raw_xpr_data[MAX_XPR_COUNT]; -unsigned volatile raw_xpr_lock = 0; -unsigned raw_xpr_index = 0; - -void _raw_xpr(char *fmt, unsigned b, unsigned c, task_t t) -{ - unsigned myindex; - m88k_psr_type psr = disable_interrupts_return_psr(); - simple_lock(&raw_xpr_lock); - if (raw_xpr_index < (MAX_XPR_COUNT - 1)) { - myindex = raw_xpr_index++; - } else { - myindex = 0; - raw_xpr_index = 1; - } - simple_unlock(&raw_xpr_lock); - set_psr(psr); - - raw_xpr_data[myindex].task = t; - raw_xpr_data[myindex].fmt = fmt; - raw_xpr_data[myindex].arg1 = b; - raw_xpr_data[myindex].arg2 = c; -} - -void raw_xpr_dump(int skipcount) -{ - int i, index = raw_xpr_index + 1; - - raw_xpr_lock = 1; /* forcefully grab the lock */ - - if (index >= MAX_XPR_COUNT) - index = 0; - else if (raw_xpr_data[index].task == 0) - index = 0; /* hasn't wrapped yet, so start at the beginning */ - - for (i = 1; i < MAX_XPR_COUNT; i++) { - if (raw_xpr_data[index].task == 0 || raw_xpr_data[index].fmt == 0) - break; /* all done */ - if (skipcount-- <= 0) - { - db_printf("%04d: ", i); - if (db_lookup_task(raw_xpr_data[index].task) < 0) - { - /* task no longer valid */ - db_printf("<task %x, fmt %x, arg %x, arg %x>\n", - raw_xpr_data[index].task, - raw_xpr_data[index].fmt, - raw_xpr_data[index].arg1, - raw_xpr_data[index].arg2); - } else { - char buffer[120]; - buffer[0] = '\0'; - db_read_bytes(raw_xpr_data[index].fmt, - sizeof(buffer), - buffer, - raw_xpr_data[index].task); - buffer[sizeof(buffer)-2] = '\n'; - buffer[sizeof(buffer)-1] = '\0'; - - db_printf(buffer, - raw_xpr_data[index].arg1, - raw_xpr_data[index].arg2); - } - } - if (++index >= MAX_XPR_COUNT) - index = 0; - } - - raw_xpr_lock = 0; -} -#endif /* JUNK */ diff --git a/sys/arch/mvme88k/mvme88k/m1x7_init.c b/sys/arch/mvme88k/mvme88k/m1x7_init.c deleted file mode 100644 index 705221fc098..00000000000 --- a/sys/arch/mvme88k/mvme88k/m1x7_init.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ -/* - * HISTORY - */ - -/* - * Basic initialization for vme187. - */ - -#include <sys/param.h> -#include <sys/systm.h> -#include <sys/proc.h> -#include <sys/user.h> -#include <sys/reboot.h> -#include <sys/exec.h> -#include <vm/pmap.h> -#include <machine/vmparam.h> -#include <machine/cpu.h> -#include <machine/bug.h> - -#define INITIAL_MHZ_GUESS 25.0 - -struct bugenv bugargs; -struct kernel{ - void *entry; - void *symtab; - void *esym; - int bflags; - int bdev; - char *kname; - void *smini; - void *emini; - void *end_load; -}kflags; -char *esym; - -int boothowto; /* read in kern/bootstrap */ -int machineid; - -#ifndef roundup -#define roundup(value, stride) (((unsigned)(value) + (stride) - 1) & ~((stride)-1)) -#endif /* roundup */ - -vm_size_t mem_size; -vm_size_t rawmem_size; -vm_offset_t first_addr = 0; -vm_offset_t last_addr = 0; - -vm_offset_t avail_start, avail_next, avail_end; -vm_offset_t virtual_avail, virtual_end; - -void *end_loaded; -int bootdev; -int no_symbols; -vm_offset_t miniroot; - -struct proc *lastproc; -pcb_t curpcb; - -void cmmu_init(void); - -double cycles_per_microsecond = INITIAL_MHZ_GUESS; - -extern struct user *proc0paddr; - -int bcd2int __P((unsigned int)); - -/* - * Called from locore.S during boot, - * this is the first C code that's run. - */ - -void -m187_bootstrap(void) -{ - extern char version[]; - extern char *edata, *end; - extern int cold; - extern int kernelstart; - extern vm_offset_t size_memory(void); - struct bugbrdid brdid; - - cold = 1; /* we are still booting */ - - bugbrdid(&brdid); - machineid = brdid.brdno; - - vm_set_page_size(); - -#if 0 - esym = kflags.esym; - boothowto = kflags.bflags; - bootdev = kflags.bdev; -#endif /* 0 */ - -#if 0 - end_loaded = kflags.end_load; - if (esym != NULL) { - end = (char *)((int)(kflags.symtab)); - } else { - first_addr = (vm_offset_t)&end; - } -#endif - - first_addr = m88k_round_page(first_addr); - - if (!no_symbols) - boothowto |= RB_KDB; - - printf("about to probe\n"); -#if 1 - last_addr = size_memory(); -#else - last_addr = (vm_offset_t)0x01000000; - physmem = btoc(last_addr); -#endif - - printf("probing done\n"); - cmmu_init(); - - avail_start = first_addr; - avail_end = last_addr; - printf("%s",version); - printf("M187 boot: memory from 0x%x to 0x%x\n", avail_start, avail_end); - - /* - * Steal one page at the top of physical memory for msgbuf - */ - - avail_end -= PAGE_SIZE; - - pmap_bootstrap((vm_offset_t)&kernelstart - GOOFYLDOFFSET /* loadpt */, - &avail_start, &avail_end, &virtual_avail, - &virtual_end); - printf("returned from pmap_bootstrap\n"); - - /* - * Must initialize p_addr before autoconfig or - * the fault handler will get a NULL reference. - */ - proc0.p_addr = proc0paddr; - curproc = &proc0; - curpcb = &proc0paddr->u_pcb; - - /* Initialize cached PTEs for u-area mapping. */ - save_u_area(&proc0, proc0paddr); - - /* - * Map proc0's u-area at the standard address (UADDR). - */ - load_u_area(&proc0); - - /* Initialize the "u-area" pages. */ - bzero((caddr_t)UADDR, UPAGES*NBPG); - printf("returning from init\n"); -} - -#ifdef notneeded -ipow(int base, int i) -{ - int cnt = 1; - while (i--) { - cnt *= base; - } - return cnt; -} - -int -bcd2int(unsigned int i) -{ - unsigned val = 0; - int cnt = 0; - while (i) { - val += (i&0xf) * ipow(10,cnt); - cnt++; - i >>= 4; - } - return val; -} -#endif /* notneeded */ diff --git a/sys/arch/mvme88k/mvme88k/m88100_fp.S b/sys/arch/mvme88k/mvme88k/m88100_fp.S deleted file mode 100644 index c51a862ace8..00000000000 --- a/sys/arch/mvme88k/mvme88k/m88100_fp.S +++ /dev/null @@ -1,2463 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - * - * HISTORY - */ - -/* Floating point trouble routines */ - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; - -#ifndef __LUNA_SUB_H__ -#define __LUNA_SUB_H__ - -#ifndef NDEBUG /* no debugging */ -#define NDEBUG -#endif - -#ifdef NDEBUG -# define _LABEL(NAME) NAME: -#else -# define _LABEL(NAME) NAME: global NAME -#endif -# define LABEL(NAME) NAME: global NAME - -#define psr cr1 -#define spsr cr2 -#define ssb cr3 -#define scip cr4 -#define snip cr5 -#define sfip cr6 -#define vbr cr7 -#define dmt0 cr8 -#define scratch1 cr18 -#define scratch2 cr20 -#define fpecr fcr0 -#define s1hi fcr1 -#define s1lo fcr2 -#define s2hi fcr3 -#define s2lo fcr4 -#define pcr fcr5 -#define manthi fcr6 -#define mantlo fcr7 -#define impcr fcr8 -#define fpsr fcr62 -#define fpcr fcr63 -#define valid 1 -#define exception 0 -#define exc_disable 0 -#define FP_disable 3 -#define dexc 27 -#define serial 29 -#define destsize 10 -#define inexact 0 -#define overflow 1 -#define underflow 2 -#define divzero 3 -#define oper 4 -#define sign 31 -#define s1size 9 -#define s2size 7 -#define dsize 5 -#define full 1 -#define fault 0 -#define FADDop 0x05 -#define FSUBop 0x06 -#define FCMPop 0x07 -#define FMULop 0x00 -#define FDIVop 0x0e -#define FSQRTop 0x0f -#define FLTop 0x04 -#define INTop 0x09 -#define NINTop 0x0a -#define TRNCop 0x0b -#define mode 31 -#define s1sign 9 -#define s2sign 8 -#define s1nan 7 -#define s2nan 6 -#define s1inf 5 -#define s2inf 4 -#define s1zero 3 -#define s2zero 2 -#define s1denorm 1 -#define s2denorm 0 -#define sigbit 19 -#define sigbits 22 -#define sigbitd 19 -#define nc 0 -#define cp 1 -#define eq 2 -#define ne 3 -#define gt 4 -#define le 5 -#define lt 6 -#define ge 7 -#define ou 8 -#define ib 9 -#define in 10 -#define ob 11 -#define FRAMESIZE 200 -#define SWITCHUSER 128 -#if 0 -#define XR1 4 -#define XR2 8 -#define XR3 12 -#define XR4 16 -#define XR5 20 -#define XR6 24 -#define XR7 28 -#define XR8 32 -#define XR9 36 -#define XR10 40 -#define XR11 44 -#define XR12 48 -#define XR13 52 -#define XR14 56 -#define XR15 60 -#define XR16 64 -#define XR17 68 -#define XR18 72 -#define XR19 76 -#define XR20 80 -#define XR21 84 -#define XR22 88 -#define XR23 92 -#define XR24 96 -#define XR25 100 -#define XR26 104 -#define XR27 108 -#define XR28 112 -#define XR29 116 -#define XR30 120 -#define XR31 124 -#define XFPSR 128 -#define XFPCR 132 -#define XFPECR 136 -#define XS1HI 140 -#define XS1LO 144 -#define XS2HI 148 -#define XS2LO 152 -#define XPCR 156 -#define XMANTHI 140 -#define XMANTLO 144 -#define XIMPCR 148 -#define XSPSR 160 -#define XSSB 164 -#define XSNIP 168 -#define XSFIP 172 -#define XRETADDR 176 -#define XHANDRETADDR 180 -#define XHANDFPECR 184 -#define XHANDPR 188 -#define XHANDIMP 192 -#endif -#define STKSTATE 196 -#define handtrap 134 -#define modehi 30 -#define modelo 29 -#define rndhi 15 -#define rndlo 14 -#define efunf 7 -#define efovf 6 -#define efinx 5 -#define hiddens 23 -#define hiddend 20 -#define NUMFRAME 10 -#define SIGILL 4 -#define SIGFPEPR 8 -#define u_sfu1full 0x4 -#define u_xcpt 0x8 -#define USIZE 0x0ff0 -#endif -;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; - -#ifndef LOCORE -#define LOCORE - -#ifndef ASSEMBLER /* predefined by ascpp, at least */ -#define ASSEMBLER -#endif - -#include <machine/trap.h> -#include "assym.s" -#ifndef __LUNA_SUB_H__ -#include "luna_sub.h" -#endif -#endif -#define MARK or r21, r0, __LINE__ - - text - align 4 - global _Xfp_precise -_Xfp_precise: - or r29, r3, r0 ; r29 is now the E.F. - subu r31, r31, 40 - st r1, r31, 32 - st r29, r31, 36 - - ld r2, r29, EF_FPSR * 4 - ld r3, r29, EF_FPCR * 4 - ld r4, r29, EF_FPECR * 4 - ld r5, r29, EF_FPHS1 * 4 - ld r6, r29, EF_FPLS1 * 4 - ld r7, r29, EF_FPHS2 * 4 - ld r8, r29, EF_FPLS2 * 4 - ld r9, r29, EF_FPPT * 4 - - - ;Load into r1 the return address for the 0 handlers. Looking - ;at FPECR, branch to the appropriate 0 handler. However, - ;if none of the 0 bits are enabled, then a floating point - ;instruction was issued with the floating point unit disabled. This - ;will cause an unimplemented opcode 0. - - or.u r1,r0,hi16(wrapup) ;load return address of function - or r1,r1,lo16(wrapup) -2: bb0 6,r4, 3f ;branch to FPunimp if bit set - br FPuimp -3: bb0 7,r4, 4f ;branch to FPintover if bit set - br _FPintover -4: ; bb0 5,r4, 5f ;branch to FPpriviol if bit set - ; br _FPpriviol -5: bb0 4,r4, 6f ;branch to FPresoper if bit set - br _FPresoper -6: bb0 3,r4, 7f ;branch to FPdivzero if bit set - br _FPdivzero -7: - or.u r4, r4, 0xffff - -FPuimp: global FPuimp -fp_p_trap: - subu r31,r31,40 /* allocate stack */ - st r1,r31,36 /* save return address */ - st r3,r31,32 /* save exception frame */ - or r2,r0,T_FPEPFLT /* load trap type */ - or r3, r29, r0 - bsr _trap /* trap */ - ld r1,r31,36 /* recover return address */ - addu r31,r31,40 /* deallocate stack */ - br fp_p_return - - ;To write back the results to the user registers, disable exceptions - ;and the floating point unit. Write FPSR and FPCR and load the SNIP - ;and SFIP. - ;r5 will contain the upper word of the result - ;r6 will contain the lower word of the result - -wrapup: global wrapup - tb1 0,r0,0 ;make sure all floating point operations - ;have finished - ldcr r10, cr1 ;load the PSR - or r10, r10, 0x2 ;disable interrupts - stcr r10, cr1 -#if 0 -Why is this done? -jfriedl - or r10, r10, 0x8 ;set SFU 1 disable bit, disable SFU 1 - stcr r10, cr1 -#endif - ld r1, r31, 32 - ld r29, r31, 36 - addu r31, r31, 40 - - fstcr r2, fpsr ;write revised value of FPSR - fstcr r3, fpcr ;write revised value of FPCR - - ;result writeback routine - addu r3, r29, EF_R0 * 4 - extu r2, r9, 5<0> ;get 5 bits of destination register - bb0 5, r9, writesingle ;branch if destination is single - -;writedouble here - st r5, r3 [r2] ;write high word - add r2, r2, 1 ;for double, the low word is the - ;unspecified register - clr r2, r2, 27<5> ;perform equivalent of mod 32 -writesingle: - st r6, r3 [r2] ;write low word into memory - -fp_p_return: - jmp r1 -;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; - -#ifndef __LUNA_SUB_H__ -#include "luna_sub.h" -#endif - text - global _FPdivzero - - -;Check if the numerator is zero. If the numerator is zero, then handle -;this instruction as you would a 0/0 invalid operation. - -_FPdivzero: - st r1,r31,0 ;save return address - bb1 s1size,r9,1f ;branch if numerator double -/* single number */ - clr r10,r5,1<sign> ;clear sign bit - extu r11,r6,3<29> ;grab upper bits of lower word - or r10,r10,r11 ;combine ones of mantissa - bcnd eq0,r10,resoper ;numerator is zero, handle reserved - ;operand - br setbit ;set divzero bit -1: -/* double number */ - clr r10,r5,1<sign> ;clear sign bit - or r10,r10,r6 ;or high and low words - bcnd ne0,r10,setbit ;set divzero bit - -;The numerator is zero, so handle the invalid operation by setting the -;invalid operation bit and branching to the user handler if there is one -;or writing a quiet NaN to the destination. - -resoper: - set r2,r2,1<oper> ;set bit in FPSR -#ifdef HANDLER - bb0 oper,r3,noreshand ;branch to execute default handling for - ;reserved operands - bsr _handler ;branch to user handler - br FP_div_return ;return from function -#endif - -noreshand: - set r5,r0,0<0> ;put a NaN in high word - set r6,r0,0<0> ;put a NaN in low word - br FP_div_return ;return from subroutine - ;writing to a word which may be ignored - ;is just as quick as checking the precision - ;of the destination - -;The operation is divide by zero, so set the divide by zero bit in the -;FPSR. If the user handler is set, then go to the user handler, else -;go to the default mode. - -setbit: -#ifdef HANDLER - set r2,r2,1<divzero> ;set bit in FPSR - bb0 divzero,r3,default ;go to default routine if no handler - bsr _handler ;execute handler routine - br FP_div_return ;return from subroutine -#endif - - -;Considering the sign of the numerator and zero, write a correctly -;signed infinity of the proper precision into the destination. - -default: - bb1 dsize,r9,FPzero_double ;branch to handle double result -FPzero_single: - clr r10,r5,31<0> ;clear all of S1HI except sign bit - xor r10,r7,r10 ;xor the sign bits of the operands - or.u r6,r0,0x7f80 ;load single precision infinity - br.n FP_div_return ;return from subroutine - or r6,r6,r10 ;load correctly signed infinity - -FPzero_double: - clr r10,r5,31<0> ;clear all of S1HI except sign bit - xor r10,r7,r10 ;xor the sign bits of the operands - or.u r5,r0,0x7ff0 ;load double precision infinity - or r5,r5,r10 ;load correctly signed infinity - or r6,r0,r0 ;clear lower word of double - -FP_div_return: - ld r1,r31,0 ;load return address - jmp r1 ;return from subroutine -;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; - -#ifndef __LUNA_SUB_H__ -#include "luna_sub.h" -#endif - text - - -;Both NINT and TRNC require a certain rounding mode, so check which -;instruction caused the integer conversion overflow. Use a substitute -;FPCR in r1, and modify the rounding mode if the instruction is NINT or TRNC. - -_FPintover: global _FPintover - extu r10,r9,5<11> ;extract opcode - cmp r11,r10,INTop ;see if instruction is INT - st r1,r31,0 ;save return address - bb1.n eq,r11,checksize ;instruction is INT, do not modify - ;rounding mode - or r1,r0,r3 ;load FPCR into r1 - cmp r11,r10,NINTop ;see if instruction is NINT - bb1 eq,r11,NINT ;instruction is NINT - -TRNC: clr r1,r1,2<rndlo> ;clear rounding mode bits, - ;instruction is TRNC - br.n checksize ;branch to check size - set r1,r1,1<rndlo> ;make rounding mode round towards zero - -NINT: clr r1,r1,2<rndlo> ;make rounding mode round to nearest - - -;See whether the source is single or double precision. - -checksize: bb1 s2size,r9,checkdoub ;S2 is double, branch to see if there -;is a false alarm - - -;An integer has more bits than the mantissa of a single precision floating -;point number, so to check for false alarms (i.e. valid conversion), simply -;check the exponents. False alarms are detected for 2**30 to (2**30) - 1 and -;-2**30 to -2**31. Only seven bits need to be looked at since an exception -;will not occur for the other half of the numbering system. -;To speed up the processing, first check to see if the exponent is 32 or -;greater. - -;This code was originally written for the exponent in the control -;register to have the most significant bit (8 - single, 11 - double) -;flipped and sign extended. For precise exceptions, however, the most -;significant bit is only sign extended. Therefore, the code was chopped -;up so that it would work for positive values of real exponent which were -;only sign extended. - -checksing: extu r10,r7,7<20> ;internal representation for single -;precision is IEEE 8 bits sign extended -;to 11 bits; for real exp. = 30, the -;above instruction gives a result exp. -;that has the MSB flipped and sign -;extended like in the IMPCR - cmp r11,r10,31 ;compare to 32,but exp. off by 1 -;these 2 instructions to speed up valid -;execution of valid cases - bb1 ge,r11,overflw ;valid case, perform overflow routine - bb1 sign,r7,checksingn ;source operand is negative - -;If the number is positve and the exponent is greater than 30, than it is - ;overflow. - -checksingp: cmp r10,r10,29 ;compare to 30, but exp. off by 1 - bb1 gt,r10,overflw ;no false alarm, its overflow - br conversionsp ;finish single precision conversion - -;If the number is negative, and the exponent is 30, or 31 with a mantissa -;of 0, then it is a false alarm. - -checksingn: cmp r11,r10,30 ;compare to 31,but exp. off by 1 - bb1 lt,r11,conversionsn ;exp. less than 31, so convert - extu r10,r8,3<29> ;get upper three bits of lower mantissa - mak r12,r7,20<3> ;get upper 20 bits of mantissa - or r10,r10,r12 ;form complete mantissa - bcnd eq0,r10,conversionsn ;complete conversion if mantissa is 0 - br overflw ;no false alarm, its overflow - - -;False alarms are detected for 2**30 to (2**30) - 1 and -;-2**30 to -2**31. Only seven bits need to be looked at since an exception -;will not occur for the other half of the numbering system. -;To speed up the processing, first check to see if the exponent is 32 or -;greater. Since there are more mantissa bits than integer bits, rounding -;could cause overflow. (2**31) - 1 needs to be checked so that it does -;not round to 2**31, and -2**31 needs to be checked in case it rounds to -;-((2**31) + 1). - -checkdoub: extu r10,r7,10<20> ;internal representation for double -;precision is the same IEEE 11 bits -;for real exp. = 30, the -;above instruction gives a result exp. -;that has the MSB flipped and sign -;extended like in the IMPCR - cmp r11,r10,31 ;compare to 32,but exp. off by 1 -;these 2 instructions to speed up valid -;execution of valid cases - bb1 ge,r11,overflw ;valid case, perform overflow routine - bb1 sign,r7,checkdoubn ;source operand is negative - -;If the exponent is not 31, then the floating point number will be rounded -;before the conversion is done. A branch table is set up with bits 4 and 3 -;being the rounding mode, and bits 2, 1, and 0 are the guard, round, and -;sticky bits. - -checkdoubp: cmp r11,r10,30 ;compare to 31, but exponent off by 1 - bb1 eq,r11,overflw ;no false alarm, its overflow - extu r12,r8,1<22> ;get LSB for integer with exp. = 30 - mak r12,r12,1<2> ;start to set up field for branch table - extu r11,r8,1<21> ;get guard bit - mak r11,r11,1<1> ;set up field for branch table - or r12,r11,r12 ;set up field for branch table - extu r11,r8,21<0> ;get bits for sticky bit - bcnd eq0,r11,nostickyp ;do not set sticky - set r12,r12,1<0> ;set sticky bit -nostickyp: rot r11,r1,0<rndlo> ;shift rounding mode to 2 LSB''s - mak r11,r11,2<3> ;set up field, clear other bits - or r12,r11,r12 ;set up field for branch table - lda r12,r0[r12] ;scale r12 - or.u r12,r12,hi16(ptable) ;load pointer into table - addu r12,r12,lo16(ptable) - jmp r12 ;jump into branch table - -ptable: br conversiondp -p00001: br conversiondp -p00010: br conversiondp -p00011: br paddone -p00100: br conversiondp -p00101: br conversiondp -p00110: br paddone -p00111: br paddone -p01000: br conversiondp -p01001: br conversiondp -p01010: br conversiondp -p01011: br conversiondp -p01100: br conversiondp -p01101: br conversiondp -p01110: br conversiondp -p01111: br conversiondp -p10000: br conversiondp -p10001: br conversiondp -p10010: br conversiondp -p10011: br conversiondp -p10100: br conversiondp -p10101: br conversiondp -p10110: br conversiondp -p10111: br conversiondp -p11000: br conversiondp -p11001: br paddone -p11010: br paddone -p11011: br paddone -p11100: br conversiondp -p11101: br paddone -p11110: br paddone -p11111: br paddone - -;Add one to the bit of the mantissa which corresponds to the LSB of an -;integer. If the mantissa overflows, then there is a valid integer -;overflow conversion; otherwise, the mantissa can be converted to the integer. - -paddone: or r10,r0,r0 ;clear r10 - set r10,r10,1<22> ;set LSB bit to 1 for adding - addu.co r8,r8,r10 ;add the 1 obtained from rounding - clr r11,r7,12<20> ;clear exponent and sign - addu.ci r11,r0,r11 ;add carry - bb1 20,r11,overflw ;overflow to 2**31, abort the rest - br.n conversiondp ;since the exp. was 30, and the exp. - ;did not round up to 31, the largest - ;number that S2 could become is 2**31-1 - or r7,r0,r11 ;store r11 into r7 for conversion - -;Now check for negative double precision sources. If the exponent is 30, -;then convert the false alarm. If the exponent is 31, then check the mantissa -;bits which correspond to integer bits. If any of them are a one, then there -;is overflow. If they are zero, then check the guard, round, and sticky bits. -;Round toward zero and positive will not cause a roundup, but round toward -;nearest and negative may, so perform those roundings. If there is no overflow, - ;then convert and return from subroutine. - -checkdoubn: cmp r11,r10,29 ;compare to 30, but exp. off by 1 - bb1 eq,r11,conversiondn ;false alarm if exp. = 30 - extu r10,r8,11<21> ;check upper bits of lower mantissa - bcnd ne0,r10,overflw ;one of the bits is a 1, so overflow - extu r10,r7,20<0> ;check upper bits of upper mantissa - bcnd ne0,r10,overflw ;one of the bits is a 1, so overflow - bb0 rndlo,r1,possround ;rounding mode is either round near or - ;round negative, which may cause a - ;round - br.n FPintov_return ;round positive, which will not cause a - ;round - set r6,r0,1<sign> ;rounding mode is either round zero or -possround: extu r12,r8,1<20> ;get guard bit - extu r11,r8,20<0> ;get bits for sticky bit - bcnd.n eq0,r11,nostickyn ;do not set sticky - mak r12,r12,1<1> ;set up field for branch table - set r12,r12,1<0> ;set sticky bit -nostickyn: bb1 rndhi,r1,negative ;rounding mode is negative -nearest: cmp r12,r12,3 ;are both guard and sticky set - bb1 eq,r12,overflw ;both guard and sticky are set, - ;so signal overflow - or r6,r0,r0 ;clear destination register r6 - br.n FPintov_return ;return from subroutine - set r6,r6,1<sign> ;set the sign bit and take care of - ;this special case -negative: bcnd ne0,r12,overflw ;-2**31 will be rounded to -(2**31+1), - ;so signal overflow - or r6,r0,r0 ;clear destination register r6 - br.n FPintov_return ;return from subroutine - set r6,r6,1<sign> ;set the sign bit and take care of - ;this special case - - ;since the exp. was 30, and there was - ;no round-up, the largest number that - ;S2 could have been was 2**31 - 1 - - - ;Convert the single precision positive floating point number. - -conversionsp: extu r6,r8,3<29> ;extract lower bits of integer - mak r6,r6,3<7> ;shift left to correct place in integer - mak r10,r7,20<10> ;shift left upper bits of integer - or r6,r6,r10 ;form most of integer - br.n FPintov_return ;return from subroutine - set r6,r6,1<30> ;set hidden one - - - ;Convert the single precision negative floating point number. - -conversionsn: bb1 eq,r11,exp31s ;use old r11 to see if exp. is 31 - extu r6,r8,3<29> ;extract lower bits of mantissa - mak r6,r6,3<7> ;shift left to correct place in integer - mak r10,r7,20<10> ;shift left upper bits of integer - or r6,r6,r10 ;form most of integer - set r6,r6,1<30> ;set hidden one - or.c r6,r0,r6 ;negate result - br.n FPintov_return ;return from subroutine - addu r6,r6,1 ;add 1 to get 2''s complement -exp31s: or r6,r0,r0 ;clear r6 - br.n FPintov_return ;return from subroutine - set r6,r6,1<sign> ;set sign bit - - - ;Convert the double precision positive floating point number. - -conversiondp: extu r6,r8,10<22> ;extract lower bits of integer - mak r10,r7,20<10> ;shift left upper bits of integer - or r6,r6,r10 ;form most of integer - br.n FPintov_return ;return from subroutine - set r6,r6,1<30> ;set hidden one - - - ;Convert the double precision negative floating point number. The number, - ;whose exponent is 30, must be rounded before converting. Bits 4 and 3 are - ;the rounding mode, and bits 2, 1, and 0 are the guard, round, and sticky - ;bits for the branch table. - -conversiondn: extu r12,r8,1<22> ;get LSB for integer with exp. = 30 - mak r12,r12,1<2> ;start to set up field for branch table - extu r11,r8,1<21> ;get guard bit - mak r11,r11,1<1> ;set up field for branch table - or r12,r11,r12 ;set up field for branch table - extu r11,r8,21<0> ;get bits for sticky bit - bcnd eq0,r11,nostkyn ;do not set sticky - set r12,r12,1<0> ;set sticky bit -nostkyn: rot r11,r1,0<rndlo> ;shift rounding mode to 2 LSB''s - mak r11,r11,2<3> ;set up field, clear other bits - or r12,r11,r12 ;set up field for branch table - lda r12,r0[r12] ;scale r12 - or.u r12,r12,hi16(ntable);load pointer into table - addu r12,r12,lo16(ntable) - jmp r12 ;jump into branch table - -ntable: br nnoaddone -n00001: br nnoaddone -n00010: br nnoaddone -n00011: br naddone -n00100: br nnoaddone -n00101: br nnoaddone -n00110: br naddone -n00111: br naddone -n01000: br nnoaddone -n01001: br nnoaddone -n01010: br nnoaddone -n01011: br nnoaddone -n01100: br nnoaddone -n01101: br nnoaddone -n01110: br nnoaddone -n01111: br nnoaddone -n10000: br nnoaddone -n10001: br naddone -n10010: br naddone -n10011: br naddone -n10100: br nnoaddone -n10101: br naddone -n10110: br naddone -n10111: br naddone -n11000: br nnoaddone -n11001: br nnoaddone -n11010: br nnoaddone -n11011: br nnoaddone -n11100: br nnoaddone -n11101: br nnoaddone -n11110: br nnoaddone -n11111: br nnoaddone - - - ;Add one to the mantissa, and check to see if it overflows to -2**31. -;The conversion is done in nnoaddone:. - -naddone: or r10,r0,r0 ;clear r10 - set r10,r10,1<22> ;set LSB bit to 1 for adding - add.co r8,r8,r10 ;add the 1 obtained from rounding - clr r7,r7,12<20> ;clear exponent and sign - add.ci r7,r0,r7 ;add carry - bb1 20,r7,maxneg ;rounded to -2**31,handle separately - ;the exponent was originally 30 -nnoaddone: extu r6,r8,11<22> ;extract lower bits of integer - mak r10,r7,20<10> ;shift left upper bits of integer - or r6,r6,r10 ;form most of integer - set r6,r6,1<30> ;set hidden one - or.c r6,r0,r6 ;negate integer - br.n FPintov_return ;return from subroutine - addu r6,r6,1 ;add 1 to get 2''s complement - -maxneg: or r6,r0,r0 ;clear integer - br.n FPintov_return ;return from subroutine - set r6,r6,1<sign> ;set sign bit - - - ;For valid overflows, check to see if the integer overflow user handler is - ;set. If it is set, then go to user handler, else write the correctly - ;signed largest integer. - -overflw: -#ifdef HANDLER - bb0.n oper,r3,nohandler ;do not go to user handler routine - set r2,r2,1<oper> ;set invalid operand bit - bsr _handler ;go to user handler routine - br FPintov_return ;return from subroutine -nohandler: -#endif - bb0.n sign,r7,FPintov_return ;if positive then return from subroutine - set r6,r6,31<0> ;set result to largest positive integer - or.c r6,r0,r6 ;negate r6,giving largest negative int. - -FPintov_return: ld r1,r31,0 ;load return address from memory - jmp r1 ;return from subroutine - - data -;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; - -#ifndef __LUNA_SUB_H__ -#include "luna_sub.h" -#endif - text - - -;Some instructions only have the S2 operations, so clear S1HI and S1LO -;for those instructions so that the previous contents of S1HI and S1LO -;do not influence this instruction. - -LABEL(_FPresoper) - st r1, r31, 0 - extu r10,r9,5<11> ;extract opcode -; cmp r11,r10,FSQRTop ;compare to FSQRT -; bb1 eq,r11,S1clear ;clear S1 if instruction only had S2 operand - cmp r11,r10,INTop ;compare to INT - bb1 eq,r11,S1clear ;clear S1 if instruction only had S2 operand - cmp r11,r10,NINTop ;compare to NINT - bb1 eq,r11,S1clear ;clear S1 if instruction only had S2 operand - cmp r11,r10,TRNCop ;compare to TRNC - bb0 eq,r11,opercheck ;check for reserved operands - -_LABEL(S1clear) - or r5,r0,r0 ;clear any NaN''s, denorms, or infinities - or r6,r0,r0 ;that may be left in S1HI,S1LO from a - ;previous instruction - -;r12 contains the following flags: -; bit 9 -- s1sign -; bit 8 -- s2sign -; bit 7 -- s1nan -; bit 6 -- s2nan -; bit 5 -- s1inf -; bit 4 -- s2inf -; bit 3 -- s1zero -; bit 2 -- s2zero -; bit 1 -- s1denorm -; bit 0 -- s2denorm - -;Using code for both single and double precision, check if S1 is either -;a NaN or infinity and set the appropriate flags in r12. Then check if -;S2 is a NaN or infinity. If it is a NaN, then branch to the NaN routine. - - -_LABEL(opercheck) - extu r10,r5,11<20> ;internal representation for double - bb1.n s1size,r9,S1NaNdoub ;S1 is double precision - or r12,r0,r0 ;clear operand flag register -_LABEL(S1NaNsing) - xor r10,r10,0x0080 ;internal representation for single - ext r10,r10,8<0> ;precision is IEEE 8 bits sign extended - ;to 11 bits; for real exp. > 0, the - ;above instructions gives a result exp. - ;that has the MSB flipped and sign - ;extended like in the IMPCR - cmp r11,r10,127 ;Is exponent equal to IEEE 255 (internal 127) - bb1 ne,r11,S2NaN ;source 1 is not a NaN or infinity - mak r10,r5,20<0> ;load r10 with upper bits of S1 mantissa - extu r11,r6,3<29> ;get 3 upper bits of lower word - or r11,r10,r11 ;combine any existing 1''s - bcnd eq0,r11,noS1NaNs ;since r11 can only hold 0 or a positive - ;number, branch to noS1NaN when eq0 - br.n S2NaN ;see if S2 has a NaN - set r12,r12,1<s1nan> ;indicate that S1 has a NaN -_LABEL(noS1NaNs) - br.n S2NaN ;check contents of S2 - set r12,r0,1<s1inf> ;indicate that S1 has an infinity - -_LABEL(S1NaNdoub) - xor r10,r10,0x0400 ;precision is the same IEEE 11 bits - ;The - ;above instructions gives a result exp. - ;that has the MSB flipped and sign - ;extended like in the IMPCR - cmp r11,r10,1023 ;Is exp. equal to IEEE 2047 (internal 1023) - bb1 ne,r11,S2NaN ;source 1 is not a NaN or infinity - mak r10,r5,20<0> ;load r10 with upper bits of S1 mantissa - or r11,r6,r10 ;combine existing 1''s of mantissa - bcnd eq0,r11,noS1NaNd ;since r11 can only hold 0 or a positive - ;number, branch to noS1NaN when eq0 - br.n S2NaN ;see if S2 has a NaN - set r12,r12,1<s1nan> ;indicate that S1 has a NaN -_LABEL(noS1NaNd) - set r12,r0,1<s1inf> ;indicate that S1 has an infinity - -_LABEL(S2NaN) - bb1.n s2size,r9,S2NaNdoub ;S1 is double precision - extu r10,r7,11<20> ;internal representation for double -_LABEL(S2NaNsing) - xor r10,r10,0x0080 ;internal representation for single - ext r10,r10,8<0> ;precision is IEEE 8 bits sign extended - ;to 11 bits; for real exp. > 0, the - ;above instruction gives a result exp. - ;that has the MSB flipped and sign - ;extended like in the IMPCR - cmp r11,r10,127 ;Is exponent equal to IEEE 255 (internal 127) - bb1 ne,r11,inf ;source 2 is not a NaN or infinity - mak r10,r7,20<0> ;load r10 with upper bits of S1 mantissa - extu r11,r8,3<29> ;get 3 upper bits of lower word - or r11,r10,r11 ;combine any existing 1''s - bcnd eq0,r11,noS2NaNs ;since r11 can only hold 0 or a positive - ;number, branch to noS2NaNs when eq0 - br.n _NaN ;branch to NaN routine - set r12,r12,1<s2nan> ;indicate that s2 has a NaN -_LABEL(noS2NaNs) - bb0 s1nan,r12, 1f ;branch to NaN if S1 is a NaN - br _NaN -1: br.n _infinity ;If S1 had a NaN we would have already - ;branched, and S2 does not have a NaN, but - ;it does have an infinity, so branch to - ;handle the finity - set r12,r12,1<s2inf> ;indicate that S2 has an infinity - -_LABEL(S2NaNdoub) - xor r10,r10,0x0400 ;precision is the same IEEE 11 bits - ;The - ;above instruction gives a result exp. - ;that has the MSB flipped and sign - ;extended like in the IMPCR - cmp r11,r10,1023 ;Is exp. equal to IEEE 2047 (internal 1023) - bb1 ne,r11,inf ;source 2 is not a NaN or infinity - mak r10,r7,20<0> ;load r10 with upper bits of S2 mantissa - or r11,r8,r10 ;combine existing 1''s of mantissa - bcnd eq0,r11,noS2NaNd ;since r11 can only hold 0 or a positive - ;number, branch to noS2NaNd when eq0 - br.n _NaN ;branch to NaN routine - set r12,r12,1<s2nan> ;indicate that s2 has a NaN -_LABEL(noS2NaNd) - bb0 s1nan,r12,1f ;branch to NaN if S1 is a NaN - br _NaN -1: br.n _infinity ;If S1 had a NaN we would have already - ;branched, and S2 does not have a NaN, but - ;it does have an infinity, so branch to - ;handle the finity - set r12,r12,1<s2inf> ;indicate that S2 has an infinity - - -;If S2 was a NaN, the routine would have already branched to NaN. If S1 -;is a NaN, then branch to NaN. If S1 is not a NaN and S2 is infinity, then -;we would have already branched to infinity. If S1 is infinity, then branch. -;If the routine still has not branched, then branch to denorm, the only -;reserved operand left. - -_LABEL(inf) - bb0 s1nan,r12,1f ;branch if S1 has a NaN and S2 does not - br _NaN -1: bb0 s1inf,r12,2f ;Neither S1 or S2 has a NaN, and we would - ;have branched already if S2 had an - ;infinity, so branch if S1 is infinity -/* - * The above "bb0 s1inf, r12,2f" had been a "bb1", but it just didn't make - * sense (and didn't work, either), so I changed it. - * jfriedl Dec 1, 1989. - */ - br _infinity -2: - - br _denorm ;branch to denorm, the only remaining - ;alternative -;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; - -;function _FPunderflow -- -;The documentation for this release give an overall description of this code. - -#ifndef __LUNA_SUB_H__ -#include "luna_sub.h" -#endif - global _FPunderflow - text - -;First check for an underflow user handler. If there is not one, then -;branch to the routine to make a denormalized number. Before branching -;to the underflow user handler, add 192 to a single precision exponent -;and 1536 to a double precision exponent. - -_FPunderflow: st r1,r31,0 ;save return address -#ifdef HANDLER - bb0 efunf,r12,denorm ;jump to default procedure - bb1.n destsize,r12,doubleprec ;double precision destination - set r2,r2,1<underflow> ;set underflow flag in FPSR -singleprec: or.u r6,r0,0x0c00 ;load exponent adjust 192 - br.n callundhand ;branch to call handler for user handler - add r12,r6,r12 ;adjust single precision exponent -doubleprec: or.u r6,r0,0x6000 ;load exponent adjust 1536 - add r12,r6,r12 ;adjust double precision exponent -callundhand: bsr _handler ;call handler for user handler - br Ureturn ;return from subroutine -#endif - -;Now the floating point number, which has an exponent smaller than what -;IEEE allows, must be denormalized. Denormalization is done by calculating -;the difference between a denormalized exponent and an underflow exponent and -;shifting the mantissa by that amount. A one may need to be subtracted from -;the LSB if a one was added during rounding. -;r9 is used to contain the guard, round, sticky, and an inaccuracy bit in -;case some bits were shifted off the mantissa during denormalization. -;r9 will contain: bit 4 -- new addone if one added during rounding -; after denormalization -; bit 3 -- inaccuracy flag caused by denormalization -; or pre-denormalization inexactness -; bit 2 -- guard bit of result -; bit 1 -- round bit of result -; bit 0 -- sticky bit of result - -denorm: bb1.n destsize,r12,Udouble ;denorm for double - extu r9,r10,3<26> ;load r9 with grs -Usingle: mak r5,r10,21<3> ;extract high 21 bits of mantissa - extu r6,r11,3<29> ;extract low 3 bits of mantissa - or r11,r5,r6 ;form 24 bits of mantissa - -;See if the addone bit is set and unround if it is. - bb0.n 25,r10,nounrounds ;do not unround if addone bit clear - extu r6,r12,12<20> ;extract signed exponent from IMPCR -unrounds: subu r11,r11,1 ;subtract 1 from mantissa -;If the hidden bit is cleared after subtracting the one, then the one added -;during the rounding must have propagated through the mantissa. The exponent -;will need to be decremented. - bb1 23,r11,nounrounds ;if hidden bit is set,then exponent does - ;not need to be decremented -decexps: sub r6,r6,1 ;decrement exponent 1 - set r11,r11,1<23> ;set the hidden bit - -;For both single and double precision, there are cases where it is easier -;and quicker to make a special case. Examples of this are if the shift -;amount is only 1 or 2, or all the mantissa is shifted off, or all the -;mantissa is shifted off and it is still shifting, or, in the case of -;doubles, if the shift amount is around the boundary of MANTLO and MANTHI. - -nounrounds: or r8,r0,lo16(0x00000f81) ;load r8 with -127 in decimal - ;for lowest 12 bits - sub r7,r8,r6 ;find difference between two exponents, - ;this amount is the shift amount - cmp r6,r7,3 ;check to see if r7 contains 3 or more - bb1 ge,r6,threesing ;br to code that handles shifts of >=3 - cmp r6,r7,2 ;check to see if r7 contains 2 - bb1 eq,r6,twosing ;br to code that handles shifts of 2 -one: rot r9,r9,0<1> ;rotate roundoff register once, this places - ;guard in round and round in sticky - bb0 31,r9,nosticky1s;do not or round and sticky if sticky is - ;0, this lost bit will be cleared later - set r9,r9,1<0> ;or round and sticky -nosticky1s: bb0 0,r11,guardclr1s ;do not set guard bit if LSB = 0 - set r9,r9,1<2> ;set guard bit -guardclr1s: extu r11,r11,31<1> ;shift mantissa right 1 - br.n round ;round result - mak r9,r9,3<0> ;clear bits lost during rotation - -twosing: rot r9,r9,0<2> ;rotate roundff register twice, this places - ;guard in sticky - bb0 30,r9,nosticky2s ;do not or guard and sticky if stick is 0 - ;this lost bit will be cleared later - br.n noround2s ;skip or old guard and old round if old - ;sticky set - set r9,r9,1<0> ;or guard and sticky -nosticky2s: bb0 31,r9,noround2s ;do not or guard and round if round is 0 - ;this lost bit will be cleared later - set r9,r9,1<0> ;or guard and round -noround2s: bb0 0,r11,roundclr2s ;do not set round bit if LSB = 0 - set r9,r9,1<1> ;set round bit -roundclr2s: bb0 1,r11,guardclr2s ;do not set guard bit if LSB + 1 = 0 - set r9,r9,1<2> ;set guard bit -guardclr2s: extu r11,r11,30<2> ;shift mantissa right 2 - br.n round ;round result - mak r9,r9,3<0> ;clear bits lost during rotation - -threesing: bb1 0,r9,noguard3s ;check sticky initially - ;sticky is set, forget most of the oring -nosticky3s: bb0 1,r9,noround3s ;check round initially, do not set sticky - br.n noguard3s ;forget most of the rest of oring - set r9,r9,1<0> ;if round is clear,set sticky if round set -noround3s: bb0.n 2,r9,noguard3s ;check guard initially, do not set sticky - clr r9,r9,2<1> ;clear the original guard and round for when - ;you get to round section - set r9,r9,1<0> ;if guard is clear,set sticky if guard set -noguard3s: cmp r6,r7,23 ;check if # of shifts is <=23 - bb1 gt,r6,s24 ;branch to see if shifts = 24 - sub r6,r7,2 ;get number of bits to check for sticky - mak r6,r6,5<5> ;shift width into width field - mak r8,r11,r6 ;mask off shifted bits -2 - ff1 r8,r8 ;see if r8 has any ones - bb1 5,r8,nostky23 ;do not set sticky if no ones found - set r9,r9,1<0> ;set sticky bit -nostky23: or r8,r0,34 ;start code to get new mantissa plus two - ;extra bits for new round and new guard bits - subu r8,r8,r7 - mak r8,r8,5<5> ;shift field width into second five bits - extu r6,r6,5<5> ;shift previous shifted -2 into offset field - or r6,r6,r8 ;complete field - extu r11,r11,r6 ;form new mantissa with two extra bits - - bb0 0,r11,nornd3s ;do not set new round bit - set r9,r9,1<1> ;set new round bit -nornd3s: bb0 1,r11,nogrd3s ;do not set new guard bit - set r9,r9,1<2> ;set new guard bit -nogrd3s: br.n round ;round mantissa - extu r11,r11,30<2> ;shift off remaining two bits - -s24: cmp r6,r7,24 ;check to see if # of shifts is 24 - bb1 gt,r6,s25 ;branch to see if shifts = 25 - bb1 0,r9,nostky24 ;skip checking if old sticky set - extu r8,r11,22<0> ;prepare to check bits that will be shifted - ;into the sticky - ff1 r8,r8 ;see if there are any 1''s - bb1 5,r8,nostky24 ;do not set sticky if no ones found - set r9,r9,1<0> ;set sticky bit -nostky24: bb0 22,r11,nornd24 ;do not set new round bit - set r9,r9,1<1> ;set new round bit -nornd24: set r9,r9,1<2> ;set new guard bit,this is hidden bit - br.n round ;round mantissa - or r11,r0,r0 ;clear r11, all of mantissa shifted off - -s25: cmp r6,r7,25 ;check to see if # of shifts is 25 - bb1 gt,r6,s26 ;branch to execute for shifts => 26 - bb1 0,r9,nostky25 ;skip checking if old sticky set - extu r8,r11,23<0> ;prepare to check bits that will be shifted - ;into the sticky - ff1 r8,r8 ;see if there are any 1''s - bb1 5,r8,nostky25 ;do not set sticky if no ones found - set r9,r9,1<0> ;set sticky bit -nostky25: set r9,r9,1<1> ;set new round bit,this is hidden bit - clr r9,r9,1<2> ;clear guard bit since nothing shifted in - br.n round ;round and assemble result - or r11,r0,r0 ;clear r11, all of mantissa shifted off - -s26: set r9,r9,1<0> ;set sticky bit,this contains hidden bit - clr r9,r9,2<1> ;clear guard and round bits since nothing - ;shifted in - br.n round ;round and assemble result - or r11,r0,r0 ;clear mantissa - -Udouble: mak r5,r10,21<0> ;extract upper bits of mantissa - bb0.n 25,r10,nounroundd ;do not unround if addone bit clear - extu r6,r12,12<20>;extract signed exponenet from IMPCR -unroundd: or r8,r0,1 - subu.co r11,r11,r8 ;subtract 1 from mantissa - subu.ci r5,r5,r0 ;subtract borrow from upper word - bb1 20,r5,nounroundd ;if hidden bit is set, then exponent does - ;not need to be decremented -decexpd: sub r6,r6,1 ;decrement exponent 1 - set r5,r5,1<20> ;set the hidden bit - -nounroundd: or r8,r0,lo16(0x00000c01) ;load r8 with -1023 in decimal - ;for lowest 12 bits - sub r7,r8,r6 ;find difference between two exponents, - ;this amount is the shift amount - cmp r6,r7,3 ;check to see if r7 contains 3 or more - bb1 ge,r6,threedoub ;br to code that handles shifts of >=3 - cmp r6,r7,2 ;check to see if r7 contains 2 - bb1 eq,r6,twodoub ;br to code that handles shifts of 2 - -onedoub: rot r9,r9,0<1> ;rotate roundoff register once, this places - ;guard in round and round in sticky - bb0 31,r9,nosticky1d;do not or round and sticky if sticky is 0 - ;this lost bit will be cleared later - set r9,r9,1<0> ;or old round and old sticky into new sticky -nosticky1d: bb0 0,r11,guardclr1d ;do not set new guard bit if old LSB = 0 - set r9,r9,1<2> ;set new guard bit -guardclr1d: extu r11,r11,31<1> ;shift lower mantissa over 1 - mak r6,r5,1<31> ;shift off low bit of high mantissa - or r11,r6,r11 ;load high bit onto lower mantissa - extu r5,r5,20<1> ;shift right once upper 20 bits of mantissa - br.n round ;round mantissa and assemble result - mak r9,r9,3<0> ;clear bits lost during rotation - -twodoub: rot r9,r9,0<2> ;rotate roundoff register twice, this places - ;old guard into sticky - bb0 30,r9,nosticky2d ;do not or old guard and old sticky if - ;old sticky is 0 - br.n noround2d ;skip or of old guard and old round if old - ;sticky set - set r9,r9,1<0> ;or old guard and old sticky into new sticky -nosticky2d: bb0 31,r9,noround2d ;do not or old guard and old round if - ;old round is 0 - set r9,r9,1<0> ;or old guard and old round into new sticky -noround2d: bb0 0,r11,roundclr2d ;do not set round bit if old LSB = 0 - set r9,r9,1<1> ;set new round bit -roundclr2d: bb0 1,r11,guardclr2d ;do not set guard bit if old LSB + 1 = 0 - set r9,r9,1<2> ;set new guard bit -guardclr2d: extu r11,r11,30<2> ;shift lower mantissa over 2 - mak r6,r5,2<30> ;shift off low bits of high mantissa - or r11,r6,r11 ;load high bit onto lower mantissa - extu r5,r5,19<2> ;shift right twice upper 19 bits of mantissa - br.n round ;round mantissa and assemble result - mak r9,r9,3<0> ;clear bits lost during rotation - -threedoub: bb1 0,r9,noguard3d ;checky sticky initially - ;sticky is set, forget most of rest of oring -nosticky3d: bb0 1,r9,noround3d ;check old round, do not set sticky if - ;old round is clear, set otherwise - br.n noguard3d ;sticky is set, forget most of rest of oring - set r9,r9,1<0> ;set sticky if old round is set -noround3d: bb0 2,r9,noguard3d ;check old guard, do not set sticky if 0 - clr r9,r9,2<1> ;clear the original guard and round for when - ;you get to round section - set r9,r9,1<0> ;set sticky if old guard is set -noguard3d: cmp r6,r7,32 ;do I need to work with a 1 or 2 word mant. - ;when forming sticky, round and guard - bb1 gt,r6,d33 ;jump to code that handles 2 word mantissas - sub r6,r7,2 ;get number of bits to check for sticky - mak r6,r6,5<5> ;shift width into width field - mak r8,r11,r6 ;mask off shifted bits -2 - ff1 r8,r8 ;see if r8 has any ones - bb1 5,r8,nostky32 ;do not set sticky if no ones found - set r9,r9,1<0> ;set sticky bit -nostky32: or r8,r0,34 ;start code to get new mantissa plus two - ;extra bits for new round and new guard bits, - ;the upper word bits will be shifted after - ;the round and guard bits are handled - subu r8,r8,r7 - mak r8,r8,5<5> ;shift field width into second five bits - extu r6,r6,5<5> ;shift previous shifted -2 into offset field - or r6,r6,r8 ;complete bit field - extu r11,r11,r6 ;partially form new low mantissa with 2 more - ;bits - bb0 0,r11,nornd32d ;do not set new round bit - set r9,r9,1<1> ;set new round bit -nornd32d: bb0 1,r11,nogrd32d ;do not set new guard bit - set r9,r9,1<2> ;set new guard bit -nogrd32d: extu r11,r11,30<2> ;shift off remaining two bits - mak r6,r7,5<5> ;shift field width into second 5 bits, if the - ;width is 32, then these bits will be 0 - or r8,r0,32 ;load word length into r8 - sub r8,r8,r7 ;form offset for high bits moved to low word - or r6,r6,r8 ;form complete bit field - mak r6,r5,r6 ;get shifted bits of high word - or r11,r6,r11 ;form new low word of mantissa - bcnd ne0,r8,regular33 ;do not adjust for special case of r8 - br.n round ;containing zeros, which would cause - or r5,r0,r0 ;all of the bits to be extracted under - ;the regular method -regular33: mak r6,r7,5<0> ;place lower 5 bits of shift into r6 - mak r8,r8,5<5> ;shift r8 into width field - or r6,r6,r8 ;form field for shifting of upper bits - br.n round ;round and assemble result - extu r5,r5,r6 ;form new high word mantissa - -d33: cmp r6,r7,33 ;is the number of bits to be shifted is 33? - bb1 gt,r6,d34 ;check to see if # of bits is 34 - bb1 0,r9,nostky33 ;skip checking if old sticky set - mak r6,r11,31<0> ;check bits that will be shifted into sticky - ff1 r8,r8 ;check for ones - bb1 5,r8,nostky33 ;do not set sticky if there are no ones - set r9,r9,1<0> ;set new sticky bit -nostky33: bb0 31,r11,nornd33 ;do not set round if bit is not a 1 - set r9,r9,1<1> ;set new round bit -nornd33: bb0 0,r5,nogrd33 ;do not set guard bit if bit is not a 1 - set r9,r9,1<2> ;set new guard bit -nogrd33: extu r11,r5,31<1> ;shift high bits into low word - br.n round ;round and assemble result - or r5,r0,r0 ;clear high word - -d34: cmp r6,r7,34 ;is the number of bits to be shifted 34? - bb1 gt,r6,d35 ;check to see if # of bits is >= 35 - bb1 0,r9,nostky34 ;skip checking if old sticky set - ff1 r8,r11 ;check bits that will be shifted into sticky - bb1 5,r8,nostky34 ;do not set sticky if there are no ones - set r9,r9,1<0> ;set new sticky bit -nostky34: bb0 0,r5,nornd34 ;do not set round if bit is not a 1 - set r9,r9,1<1> ;set new round bit -nornd34: bb0 1,r5,nogrd34 ;do not set guard bit if bit is not a 1 - set r9,r9,1<2> ;set new guard bit -nogrd34: extu r11,r5,30<2> ;shift high bits into low word - br.n round ;round and assemble result - or r5,r0,r0 ;clear high word - -d35: cmp r6,r7,52 ;see if # of shifts is 35 <= X <= 52 - bb1 gt,r6,d53 ;check to see if # of shifts is 52 - bb1.n 0,r9,nostky35 ;skip checking if old sticky set - sub r7,r7,34 ;subtract 32 from # of shifts so that opera- - ;tions can be done on the upper word, and - ;then subtract two more checking guard and - ;sticky bits - ff1 r8,r11 ;see if lower word has a bit for sticky - bb1 5,r8,stkycheck35 ;see if upper word has any sticky bits - br.n nostky35 ;quit checking for sticky - set r9,r9,1<0> ;set sticky bit -stkycheck35: mak r6,r7,5<5> ;place width into width field - mak r8,r5,r6 ;mask off shifted bits - 2 - ff1 r8,r8 ;see if r8 has any ones - bb1 5,r8,nostky35 ;do not set sticky if no ones found - set r9,r9,1<0> ;set sticky bit -nostky35: or r8,r0,32 ;look at what does not get shifted off plus - ;round and sticky, remember that the r7 value - ;was adjusted so that it did not include - ;new round or new sticky in shifted off bits - subu r8,r8,r7 ;complement width - mak r8,r8,5<5> ;shift width into width field - or r8,r7,r8 ;add offset field - extu r11,r5,r8 ;extract upper bits into low word - bb0 0,r11,nornd35 ;do not set new round bit - set r9,r9,1<1> ;set new round bit -nornd35: bb0 1,r11,nogrd35 ;do not set new guard bit - set r9,r9,1<2> ;set new guard bit -nogrd35: extu r11,r11,30<2> ;shift off remaining guard and round bits - br.n round ;round and assemble result - or r5,r0,r0 ;clear high word - -d53: cmp r6,r7,53 ;check to see if # of shifts is 53 - bb1 gt,r6,d54 ;branch to see if shifts = 54 - bb1 0,r9,nostky53 ;skip checking if old sticky set - ff1 r8,r11 ;see if lower word has a bit for sticky - bb1 5,r8,stkycheck53 ;see if upper word has any sticky bits - br.n nostky53 ;quit checking for sticky - set r9,r9,1<0> ;set sticky bit -stkycheck53: mak r6,r5,19<0> ;check bits that are shifted into sticky - ff1 r8,r6 ;see if r6 has any ones - bb1 5,r8,nostky53 ;do not set sticky if no ones found - set r9,r9,1<0> ;set sticky bit -nostky53: bb0 19,r5,nornd53 ;do not set new round bit - set r9,r9,1<1> ;set new round bit -nornd53: set r9,r9,1<2> ;set new guard bit,this is hidden bit - or r5,r0,r0 ;clear high word - br.n round ;round and assemble result - or r11,r0,r0 ;clear low word - -d54: cmp r6,r7,54 ;check to see if # of shifts is 54 - bb1 gt,r6,d55 ;branch to execute for shifts =>55 - bb1 0,r9,nostky54 ;skip checking if old sticky set - ff1 r8,r11 ;see if lower word has a bit for sticky - bb1 5,r8,stkycheck54 ;see if upper word has any sticky bits - br.n nostky54 ;quit checking for sticky - set r9,r9,1<0> ;set sticky bit -stkycheck54: mak r6,r5,20<0> ;check bits that are shifted into sticky - ff1 r8,r6 ;see if r6 has any ones - bb1 5,r8,nostky54 ;do not set sticky if no ones found - set r9,r9,1<0> ;set sticky bit -nostky54: set r9,r9,1<1> ;set new round bit,this is hidden bit - clr r9,r9,1<2> ;clear guard bit since nothing shifted in - or r5,r0,r0 ;clear high word - br.n round ;round and assemble result - or r11,r0,r0 ;clear low word - -d55: set r9,r9,1<0> ;set new sticky bit,this contains hidden bit - clr r9,r9,2<1> ;clear guard and round bits since nothing - ;shifted in - or r5,r0,r0 ;clear high word - or r11,r0,r0 ;clear low word - - -;The first item that the rounding code does is see if either guard, round, -;or sticky is set. If all are clear, then there is no denormalization loss -;and no need to round, then branch to assemble answer. -;For rounding, a branch table is set up. The left two most bits are the -;rounding mode. The third bit is either the LSB of the mantissa or the -;sign bit, depending on the rounding mode. The three LSB''s are the guard, -;round and sticky bits. - -round: ff1 r8,r9 ;see if there is denormalization loss - bb1 5,r8,assemble ;no denormalization loss or inexactness - extu r6,r10,2<modelo> ;extract rounding mode - bb1.n modehi,r10,signext ;use sign bit instead of LSB - mak r6,r6,2<4> ;shift over rounding mode - extu r7,r11,1<0> ;extract LSB - br.n grs ;skip sign extraction - mak r7,r7,1<3> ;shift over LSB -signext: extu r7,r10,1<31> ;extract sign bit - mak r7,r7,1<3> ;shift sign bit over -grs: or r6,r6,r7 - or r6,r6,r9 ;or in guard, round, and sticky - or.u r1,r0,hi16(roundtable) ;form address of branch table - or r1,r1,lo16(roundtable) - lda r6,r1[r6] ;scale offset into branch table - jmp.n r6 ;jump to branch table - set r9,r9,1<3> ;set inexact flag in r9 - -roundtable: br noaddone -r000001: br noaddone -r000010: br noaddone -r000011: br noaddone -r000100: br noaddone -r000101: br addone -r000110: br addone -r000111: br addone -r001000: br noaddone -r001001: br noaddone -r001010: br noaddone -r001011: br noaddone -r001100: br addone -r001101: br addone -r001110: br addone -r001111: br addone -r010000: br noaddone -r010001: br noaddone -r010010: br noaddone -r010011: br noaddone -r010100: br noaddone -r010101: br noaddone -r010110: br noaddone -r010111: br noaddone -r011000: br noaddone -r011001: br noaddone -r011010: br noaddone -r011011: br noaddone -r011100: br noaddone -r011101: br noaddone -r011110: br noaddone -r011111: br noaddone -r100000: br noaddone -r100001: br noaddone -r100010: br noaddone -r100011: br noaddone -r100100: br noaddone -r100101: br noaddone -r100110: br noaddone -r100111: br noaddone -r101000: br noaddone -r101001: br addone -r101010: br addone -r101011: br addone -r101100: br addone -r101101: br addone -r101110: br addone -r101111: br addone -r110000: br noaddone -r110001: br addone -r110010: br addone -r110011: br addone -r110100: br addone -r110101: br addone -r110110: br addone -r110111: br addone -r111000: br noaddone -r111001: br noaddone -r111010: br noaddone -r111011: br noaddone -r111100: br noaddone -r111101: br noaddone -r111110: br noaddone -r111111: br noaddone - -;Round by adding a one to the LSB of the mantissa. -addone: or r6,r0,1 ;load a 1 into r6 so that add.co can be used - add.co r11,r11,r6 ;add a one to the lower word of result - bb0.n destsize,r12,noaddone ;single result,forget carry - set r9,r9,1<4> ;indicate that a 1 has been added - add.ci r5,r5,r0 ;propagate carry into high word - - -;Branch to inexact user handler if there is one. - -noaddone: -#ifdef HANDLER - bb1.n efinx,r12,modformdef ;branch to modify form for user - ;handler - or r2,r2,5 ;set inexact and underflow flags -#endif - - -;Assemble the result of the denormalization routine for writeback to the -;destination register. The exponent of a denormalized number is zero, -;so simply assemble the sign and the new mantissa. - -assemble: bb1 destsize,r12,doubassem ;assemble double result - bb0 sign,r10,exassems ;exit assemble if sign is zero - set r11,r11,1<sign> ;make result negative -exassems: br Ureturn ;return from subroutine - -doubassem: bb0.n sign,r10,signclr ;do not set sign in r10 - or r10,r5,r0 ;load high word from r5 into r10 - set r10,r10,1<sign> ;high word with sign loaded -signclr: br Ureturn ;return from subroutine - - -;modfordef modifies the result of denormalization to the input format of -;the inexact user handler. This input format is the same format that -;MANTHI, MANTLO, and IMPCR were initially loaded with. - -#ifdef HANDLER -modformdef: clr r12,r12,12<20> ;clear result exponent,IMPCR complete - clr r10,r10,4<25> ;clear old guard,round,sticky,and addone - mak r5,r9,3<26> ;make grs field - bb0.n 4,r9,newaddone ;do not set new addone in MANTHI - or r10,r5,r10 ;or in new grs field - set r10,r10,1<25> ;set new addone -newaddone: bb1.n destsize,r12,moddefd ;branch to handle double precision - clr r10,r10,21<0> ;clear upper bits of old mantissa -moddefs: extu r5,r11,20<3> ;extract upper bits - or r10,r5,r10 ;MANTHI complete - bsr.n _handler ;execute user handler for inexact - rot r11,r11,0<3> ;MANTLO complete - br Ureturn ;return from subroutine -moddefd: bsr.n _handler ;execute user handler for inexact - or r10,r5,r10 ;MANTHI complete,r5 should be set to OR -#endif - - -;Return to fpui. - -Ureturn: ld r1,r31,0 ;load return address - jmp r1 ;return from subroutine - - data -;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; - -;function _FPoverflow -- -;The documentation for this release gives an overall description of this code. -data -align 4 -msg2: string "here at line %d, r1 is %x\n\0" -text - -#ifndef __LUNA_SUB_H__ -#include "luna_sub.h" -#endif -#line 23 - global _FPoverflow - text - - -;If the overflow user handler bit is not set, then the inexact bit in the -;FPSR is set, and the inexact user handler bit is checked. If it is set, -;then the inexact user handler is executed, else the default routine for -;overflow is executed. - -_FPoverflow: - st r1,r31,0 ;save return address -#ifdef HANDLER - set r2,r2,1<overflow> ;set overflow bit in r2 which holds FPSR - bb1 efovf,r12,hand ;go to user handler if bit set for overflow - set r2,r2,1<inexact> ;set inexact bit in r2 since overflow bit - ;in FPCR is not set - bb0 efinx,r12,nohandler;if userhandler for inexact not set,then - ;round result - br callhandler ;branch to user handler for inexact - -;Before the overflow user handler is executed, the exponent is modified -;by subtracting 192 for single precision and 1536 for double precision. - -hand: bb1 10,r12,doubleprec ;double precision result -singleprec: or.u r5,r0,0x0c00 ;load exponent adjust - br.n callhandler ;prepare to call user handler - subu r12,r12,r5 ;adjust single precision exponent -doubleprec: or.u r5,r0,0x6000 ;load exponent adjust - subu r12,r12,r5 ;adjust double precision exponent -callhandler: bsr _handler ;branch to common handler routine - br return ;return from overflow subroutine -#endif - -;Determine which rounding mode to use for the default procedure. - -nohandler: bb1 modehi,r10,signed ;mode is either round toward pos. or neg. - bb0 modelo,r10,OFnearest ;rounding mode is round nearest - br OFzero ;rounding mode is round zero -signed: bb0 modelo,r10,OFnegative ;rounding mode is round negative - br positive ;rounding mode is round positive - - -;In the round toward nearest mode, positive values are rounded to -;postive infinity and negative values are loaded toward negative infinity. -;The value for single or double precision is loaded from a data table. - -OFnearest: - bb1.n destsize,r12,neardouble ;branch to neardouble of - ;double result - mask.u r5,r10,0x8000 ;mask off sign bit from MANTHI - or.u r11,r0,hi16(0x7f800000) ;load single infinity constant - or r11,r11,lo16(0x7f800000) - br.n return ;return with result - or r11,r5,r11 ;adjust sign -neardouble: - or r11,r0,r0 ;load lower word of infinity - or.u r10,r0,hi16(0x7ff00000) ;load upper word of infinity - or r10,r10,lo16(0x7ff00000) - br.n return ;return with result - or r10,r5,r10 ;adjust sign - - -;In the round toward zero mode, positive values are rounded to the largest -;postive finite number and negative values are rounded toward the largest -;negative finite number. -;The value for single or double precision is loaded from a data table. - -OFzero: - bb1.n destsize,r12,zerodouble ;branch to zerodouble of - ;double result - mask.u r5,r10,0x8000 ;mask off sign bit from MANTHI - or.u r11,r0,hi16(0x7f7fffff) ;load single finite number constant - or r11,r11,lo16(0x7f7fffff) - br.n return ;return with result - or r11,r5,r11 ;adjust sign -zerodouble: - set r11,r0,0<0> ;load lower word of finite number - or.u r10,r0,hi16(0x7fefffff) ;load upper word of finite number - or r10,r10,lo16(0x7fefffff) - br.n return ;return with result - or r10,r5,r10 ;adjust sign - - -;In the round toward positve mode, positive values are rounded to -;postive infinity and negative values are loaded toward the largest -;negative finite number. -;The value for single or double precision is loaded from a data table. - -positive: - bb1 destsize,r12,posdouble ;branch to section for double result -possingle: - bb1 sign,r10,possingleneg ;branch to section for negatives -possinglepos: - or.u r11,r0,hi16(0x7f800000) ;load single infinity constant - br.n return ;return with result - or r11,r11,lo16(0x7f800000) -possingleneg: - or.u r11,r0,hi16(0x7f7fffff) ;load single finite number constant - or r11,r11,lo16(0x7f7fffff) - br.n return ;return with result - set r11,r11,1<sign> ;set sign for negative -posdouble: - bb1 sign,r10,posdoubleneg ;branch to negative double results -posdoublepos: - or r11,r0,r0 ;load lower word of double infinity - or.u r10,r0,hi16(0x7ff00000) ;load upper word of infinity - br.n return ;return with result - or r10,r10,lo16(0x7ff00000) -posdoubleneg: - set r11,r0,0<0> ;load lower word of finite number - or.u r10,r0,hi16(0x7fefffff) ;load upper word of finite number - or r10,r10,lo16(0x7fefffff) - br.n return ;return with result - set r10,r10,1<sign> ;set sign for negative - - -;In the round toward negative mode, positive values are rounded to the largest -;postive finite number and negative values are rounded to negative infinity. -;The value for single or double precision is loaded from a data table. - -OFnegative: - bb1 destsize,r12,negdouble ;branch to section for double result -negsingle: - bb1 sign,r10,negsingleneg ;branch to section for negatives -negsinglepos: - or.u r11,r0,hi16(0x7f7fffff) ;load single finite number constant - br.n return ;return with result - or r11,r11,lo16(0x7f7fffff) -negsingleneg: - or.u r11,r0,hi16(0x7f800000) ;load single infinity constant - or r11,r11,lo16(0x7f800000) - br.n return ;return with result - set r11,r11,1<sign> ;set sign for negative -negdouble: - bb1 sign,r10,negdoubleneg ;branch to negative double results -negdoublepos: - set r11,r0,0<0> ;load lower word of finite number - or.u r10,r0,hi16(0x7fefffff) ;load upper word of finite number - br.n return ;return with result - or r10,r10,lo16(0x7fefffff) -negdoubleneg: - or r11,r0,r0 ;load lower word of double infinity - or.u r10,r0,hi16(0x7ff00000) ;load upper word of infinity - or r10,r10,lo16(0x7ff00000) - set r10,r10,1<sign> ;set sign for negative - -return: - ld r1,r31,0 ;ld return address - jmp r1 ;return from subroutine - - data -;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; - -#ifndef __LUNA_SUB_H__ -#include "luna_sub.h" -#endif - text - -;If either S1 or S2 is a signalling NaN, then set the invalid operation -;bit of the FPSR. If the invalid operation user handler flag is set and -;then NaN is signalling, then branch to the handler routine to go to the -;user handler. -;If S1 is the only NaN or one of two NaN''s, then write -;a quiet S1 to the result. A signalling NaN must be made quiet before -;it can be written, but a signalling S2 is not modified in this routine -;if S1 is a NaN. - -LABEL(_NaN) - bb0.n s1nan,r12,S2sigcheck ;S1 is not a NaN - st r1,r31,0 ;save return address - bb1 sigbit,r5,S2sigcheck ;S1 is not a signaling NaN - set r2,r2,1<oper> ;set invalid operation bit in FPSR -#ifdef JEFF_DEBUGxxxxxxx - /* - * Generate a signal to the offending process. - * This uses hardcoded constants from mach/exception.h - * and mach/machine/exception.h. - */ - ldcr r2, cr17 /* first arg: current_thread() */ - or r3, r0, 3 /* second arg: EXC_ARITHMETIC */ - or r4, r0, 3 /* third arg: EXC_M88K_FLOAT_P */ - or r5, r0, r0 - subu r31, r31, 48 - bsr.n _thread_doexception - st r1, r31, 44 - ld r1, r31, 44 - br.n FPnan_return - addu r31, r31, 48 -#endif -#ifdef HANDLER - bb0 oper,r3,S1nohandler ;branch if no user handler - bsr _handler ;branch to handler - br FPnan_return -_LABEL(S1nohandler) -#endif - br.n S1write ;FPSR bit already set, S1 is made quiet, - ;and since we always write S1 if it is a - ;NaN, write S1 and skip rest of routine - set r5,r5,1<sigbit> ;make S1 a quiet NaN - -_LABEL(S2sigcheck) - bb0 s2nan,r12,S1write ;S2 is not a NaN - bb1 sigbit,r7,S1write ;S2 is not a signaling NaN - set r2,r2,1<oper> ;set invalid operation bit in FPSR -#ifdef HANDLER - bb0 oper,r3,S2nohandler ;branch if no user handler - bsr _handler ;branch to handler - br FPnan_return -#endif - -_LABEL(S2nohandler) - set r7,r7,1<sigbit> ;make S2 a quiet NaN - - -;Write a single or double precision quiet NaN unless the opeation is FCMP. -;If the operation is FCMP, then set the not comparable bit in the result. - -_LABEL(S1write) - bb0 s1nan,r12,S2write ;do not write S1 if it is not a NaN - extu r10,r9,5<11> ;extract opcode - cmp r11,r10,FCMPop ;compare to FCMP - bb1 ne,r11,S1noFCMP ;operation is not FCMP - set r6,r0,1<nc> ;set the not comparable bit - br.n FPnan_return ;return from subroutine - set r6,r6,1<ne> ;set the not equal bit -_LABEL(S1noFCMP) - bb1.n dsize,r9,wrdoubS1 ;double destination - set r5,r5,11<20> ;set all exponent bits to 1 -;The single result will be formed the same way whether S1 is a single or double -_LABEL(wrsingS1) - mak r10,r5,28<3> ;wipe out extra exponent bits - extu r11,r6,3<29> ;get lower three bits of mantissa - or r10,r10,r11 ;combine all of result except sign - clr r6,r5,31<0> ;clear all but sign - br.n FPnan_return ;return from function - or r6,r6,r10 ;form result - -_LABEL(wrdoubS1) -;;;;;; bb1 s1size,r9,wrdoubS1d ;write double source to double dest. -/* took out the above instruction -- don't see why it's there.... jfriedl */ -_LABEL(wrdoubS1s) - set r6,r6,29<0> ;set extra bits of lower word -_LABEL(wrdoubS1d) - br FPnan_return ;no modification necessary for writing - ;double to double, so return from function - -_LABEL(S2write) - extu r10,r9,5<11> ;extract opcode - cmp r11,r10,FCMPop ;compare to FCMP - bb1.n ne,r11,S2noFCMP ;operation is not FCMP - set r7,r7,11<20> ;set all exponent bits to 1 - set r6,r0,1<nc> ;set the not comparable bit - br.n FPnan_return ;return from subroutine - set r6,r6,1<ne> ;set the not equal bit -_LABEL(S2noFCMP) - bb1.n dsize,r9,wrdoubS2 ;double destination - /* - * In the original, the ".n" above and the "set r5..." below - * were omitted here. Since they're in the S1 stuff above, - * and since this isn't working right now (r5 isn't being set - * to it's part of the nan), I'll try this... - * jfriedl Dec 1, 1989 - */ - set r5,r5,11<20> ;set all exponent bits to 1 -;The single result will be formed the same way whether S1 is a single or double -_LABEL(wrsingS2) - mak r10,r7,28<3> ;wipe out extra exponent bits - extu r11,r8,3<29> ;get lower three bits of mantissa - or r10,r10,r11 ;combine all of result except sign - clr r6,r7,31<0> ;clear all but sign - br.n FPnan_return ;return from function - or r6,r6,r10 ;form result - -_LABEL(wrdoubS2) - -;;;; bb1 s2size,r9,FPnan_return ;write double source to double dest. - /* - * I took out the above branch because I just don't see how it - * makes sense. jfriedl Dec 1, '89 - */ -_LABEL(wrdoubS2s) - set r6,r8,29<0> ;set extra bits of lower word - - -;Return from this subroutine with the result. - -_LABEL(FPnan_return) - ;no modification necessary for writing - ;double to double, so return from function - ld r1,r31, 0 ;retrieve return address - jmp r1 ;return from function - - data -;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; - -;function _infinity -- -;See the documentation of this release for an overall description of this -;code. - - -#ifndef __LUNA_SUB_H__ -#include "luna_sub.h" -#endif - global _infinity - text - -;Extract the opcode, compare to a constant, and branch to the code -;for the instruction. - -_infinity: extu r10,r9,5<11> ;extract opcode - cmp r11,r10,FADDop ;compare to FADD - bb1.n eq,r11,FADD ;operation is FADD - st r1,r31,0 ;save return address - cmp r11,r10,FSUBop ;compare to FSUB - bb1 eq,r11,FSUB ;operation is FSUB - cmp r11,r10,FCMPop ;compare to FCMP - bb1 eq,r11,FCMP ;operation is FCMP - cmp r11,r10,FMULop ;compare to FMUL - bb1 eq,r11,FMUL ;operation is FMUL - cmp r11,r10,FDIVop ;compare to FDIV - bb1 eq,r11,FDIV ;operation is FDIV -; cmp r11,r10,FSQRTop;compare to FSQRT -; bb1 eq,r11,FSQRT ;operation is FSQRT - cmp r11,r10,INTop ;compare to INT - bb1 eq,r11,FP_inf_overflw ;operation is INT - cmp r11,r10,NINTop ;compare to NINT - bb1 eq,r11,FP_inf_overflw ;operation is NINT - cmp r11,r10,TRNCop ;compare to TRNC - bb1 eq,r11,FP_inf_overflw ;operation is TRNC - - -;Adding infinities of opposite signs will cause an exception, -;but all other operands will result in a correctly signed infinity. - -FADD: bb0 s1inf,r12,addS2write ;branch if S1 not infinity - bb0 s2inf,r12,addS1write ;S2 is not inf., so branch to write S1 - bb1 sign,r5,addS1neg ;handle case of S1 negative -addS1pos: bb1 sign,r7,excpt ;adding infinities of different signs - ;causes an exception - br poswrinf ;branch to write positive infinity -addS1neg: bb0 sign,r7,excpt ;adding infinities of different signs - ;causes an exception - br negwrinf ;branch to write negative infinity -addS1write: bb0 sign,r5,poswrinf ;branch to write positive infinity - br negwrinf ;branch to write negative infinity -addS2write: bb0 sign,r7,poswrinf ;branch to write positive infinity - br negwrinf ;branch to write negative infinity - - -;Subtracting infinities of the same sign will cause an exception, -;but all other operands will result in a correctly signed infinity. - -FSUB: bb0 s1inf,r12,subS2write ;branch if S1 not infinity - bb0 s2inf,r12,subS1write ;S2 is not inf., so branch to write S1 - bb1 sign,r5,subS1neg ;handle case of S1 negative -subS1pos: bb0 sign,r7,excpt ;subtracting infinities of the same sign - ;causes an exception - br poswrinf ;branch to write positive infinity -subS1neg: bb1 sign,r7,excpt ;subtracting infinities of the same sign - ;causes an exception - br negwrinf ;branch to write negative infinity -subS1write: bb0 sign,r5,poswrinf ;branch to write positive infinity - br negwrinf ;branch to write negative infinity -subS2write: bb1 sign,r7,poswrinf ;branch to write positive infinity - br negwrinf ;branch to write negative infinity - - -;Compare the operands, at least one of which is infinity, and set the -;correct bits in the destination register. - -FCMP: bb0.n s1inf,r12,FCMPS1f ;branch for finite S1 - set r4,r0,1<cp> ;since neither S1 or S2 is a NaN, set cp -FCMPS1i: bb1 sign,r5,FCMPS1ni ;branch to negative S1i -FCMPS1pi: bb0 s2inf,r12,FCMPS1piS2f ;branch to finite S2 with S1pi -FCMPS1piS2i: bb1 sign,r7,FCMPS1piS2ni ;branch to negative S2i with S1pi -FCMPS1piS2pi: set r4,r4,1<eq> ;set eq bit - set r4,r4,1<le> ;set le bit - set r4,r4,1<ge> ;set ge bit - set r4,r4,1<ib> ;set ib bit - br.n move ;return from subroutine - set r4,r4,1<ob> ;set ob bit -FCMPS1piS2ni: set r4,r4,1<ne> ;set ne bit - set r4,r4,1<gt> ;set gt bit - br.n move ;return from subroutine - set r4,r4,1<ge> ;set ge bit -FCMPS1piS2f: set r4,r4,1<ne> ;set ne bit - set r4,r4,1<gt> ;set gt bit - bsr.n _zero ;see if any of the operands are zero - set r4,r4,1<ge> ;set ge bit - bb0 s2zero,r12,FCMPS1piS2nz ;check for negative if s2 not zero - set r4,r4,1<ou> ;set ou bit - br.n move - set r4,r4,1<ob> ;set ob bit -FCMPS1piS2nz: bb1 sign,r7,move ;return from subroutine if s2 is neg. -FCMPS1piS2pf: set r4,r4,1<ou> ;set ou bit - br.n move ;return from subroutine - set r4,r4,1<ob> ;set ob bit -FCMPS1ni: bb0 s2inf,r12,FCMPS1niS2f ;branch to finite S2 with S1ni -FCMPS1niS2i: bb1 sign,r7,FCMPS1niS2ni ;branch to negative S2i with S1ni -FCMPS1niS2pi: set r4,r4,1<ne> ;set eq bit - set r4,r4,1<le> ;set le bit - set r4,r4,1<lt> ;set lt bit - set r4,r4,1<ou> ;set ou bit - br.n move ;return from subroutine - set r4,r4,1<ob> ;set ob bit -FCMPS1niS2ni: set r4,r4,1<eq> ;set eq bit - set r4,r4,1<le> ;set le bit - br.n move ;return from subroutine - set r4,r4,1<ge> ;set ge bit -FCMPS1niS2f: set r4,r4,1<ne> ;set eq bit - set r4,r4,1<le> ;set le bit - bsr.n _zero ;see if any of the operands are zero - set r4,r4,1<lt> ;set lt bit - bb0 s2zero,r12,FCMPS1niS2nz ;branch if s2 is not zero - set r4,r4,1<ou> ;set ou bit - br.n move - set r4,r4,1<ob> ;set ob bit -FCMPS1niS2nz: bb1 sign,r7,move ;return from subroutine if s2 is neg. - set r4,r4,1<ou> ;set ou bit - br.n move ;return from subroutine - set r4,r4,1<ob> ;set ob bit -FCMPS1f: bb1 sign,r5,FCMPS1nf ;branch to negative S1f -FCMPS1pf: bb1.n sign,r7,FCMPS1pfS2ni ;branch to negative S2i with S1pf - set r4,r4,1<ne> ;set ne bit -FCMPS1pfS2pi: set r4,r4,1<le> ;set le bit - set r4,r4,1<lt> ;set lt bit - bsr.n _zero - set r4,r4,1<ib> ;set ib bit - bb0 s1zero,r12,FCMPS1pfS2pinozero -FCMPS1pfS2pizero: br.n move - set r4,r4,1<ob> ;set ob bit -FCMPS1pfS2pinozero: br.n move - set r4,r4,1<in> ;set in bit -FCMPS1pfS2ni: set r4,r4,1<gt> ;set gt bit - br.n move ;return from subroutine - set r4,r4,1<ge> ;set ge bit -FCMPS1nf: bb1.n sign,r7,FCMPS1nfS2ni ;branch to negative S2i with S1nf - set r4,r4,1<ne> ;set ne bit - set r4,r4,1<le> ;set gt bit - set r4,r4,1<lt> ;set ge bit - bsr.n _zero ;see which of the operands are zero - set r4,r4,1<ob> ;set ob bit - bb0 s1zero,r12,FCMPS1nfS2pinozero ;no ls and lo -FCMPS1nfS2pizero: br.n move - set r4,r4,1<ib> ;set ib bit -FCMPS1nfS2pinozero: br.n move - set r4,r4,1<ou> ;set ou bit -FCMPS1nfS2ni: set r4,r4,1<gt> ;set gt bit - set r4,r4,1<ge> ;set ge bit - -move: br.n inf_return ;return from subroutine - or r6,r0,r4 ;transfer answer to r6 - - -;Multiplying infinity and zero causes an exception, but all other -;operations produce a correctly signed infinity. - -FMUL: bsr _zero ;see if any of the operands are zero - bb1 s1zero,r12,excpt ;infinity X 0 causes an exception - bb1 s2zero,r12,excpt ;infinity X 0 causes an exception - bb1 sign,r5,FMULS1neg ;handle negative cases of S1 - bb0 sign,r7,poswrinf ;+ X + = + - br negwrinf ;+ X - = - -FMULS1neg: bb1 sign,r7,poswrinf ;- X - = + - br negwrinf ;- X + = - - - -;Dividing infinity by infinity causes an exception, but dividing -;infinity by a finite yields a correctly signed infinity, and -;dividing a finite by an infinity produces a correctly signed zero. - -FDIV: bb1 s1inf,r12,FDIVS1inf ;handle case of S1 being infinity - bb1 sign,r5,FDIVS1nf ;handle cases of S1 being neg. non-inf. - bb1 sign,r7,FDIVS1pfS2mi ;handle case of negative S2 -FDIVS1pfS2pi: br poswrzero ;+f / +inf = +0 -FDIVS1pfS2mi: br negwrzero ;+f / -inf = -0 -FDIVS1nf: bb1 sign,r7,FDIVS1nfS2mi ;handle case of negative S2 -FDIVS1nfS2pi: br negwrzero ;-f / +inf = -0 -FDIVS1nfS2mi: br poswrzero ;-f / -inf = +0 -FDIVS1inf: bb1 s2inf,r12,excpt ;inf / inf = exception - bb1 sign,r5,FDIVS1mi ;handle cases of S1 being neg. inf. - bb1 sign,r7,FDIVS1piS2nf ;handle case of negative S2 -FDIVS1piS2pf: br poswrinf ;+inf / +f = +inf -FDIVS1piS2nf: br negwrinf ;+inf / -f = -inf -FDIVS1mi: bb1 sign,r7,FDIVS1miS2nf ;handle case of negative S2 -FDIVS1miS2pf: br negwrinf ;-inf / +f = -inf -FDIVS1miS2nf: br poswrinf ;-inf / -f = +inf - - -;The square root of positive infinity is positive infinity, -;but the square root of negative infinity is a NaN - -;FSQRT: bb0 sign,r7,poswrinf ;write sqrt(inf) = inf -; br excpt ;write sqrt(-inf) = NaN - -excpt: - set r2,r2,1<oper> ;set invalid operation bit of FPSR -#ifdef HANDLER - bb0 oper,r3,nohandler ;branch if no user handler - bsr _handler ;branch to interface with user handler - br inf_return ;return from function -nohandler: -#endif - set r5,r0,0<0> ;write NaN into r5 - br.n inf_return ;return from subroutine - set r6,r0,0<0> ;write NaN into r6, writing NaN''s into - ;both of these registers is quicker than - ;checking for single or double precision - - -;Write positive infinity of the correct precision - -poswrinf: bb1 dsize,r9,poswrinfd ;branch to write double precision inf. - br.n inf_return ;return from subroutine - or.u r6,r0,0x7f80 ;load r6 with single precision pos inf. -poswrinfd: or.u r5,r0,0x7ff0 ;load double precision pos inf. - br.n inf_return ;return from subroutine - or r6,r0,r0 - - -;Write negative infinity of the correct precision - -negwrinf: bb1 dsize,r9,negwrinfd ;branch to write double precision inf. - br.n inf_return ;return from subroutine - or.u r6,r0,0xff80 ;load r6 with single precision pos inf. -negwrinfd: or.u r5,r0,0xfff0 ;load double precision pos inf. - br.n inf_return ;return from subroutine - or r6,r0,r0 - - -;Write a positive zero disregarding precision. - -poswrzero: or r5,r0,r0 ;write to both high word and low word now - br.n inf_return ;it does not matter that both are written - or r6,r0,r0 - - -;Write a negative zero of the correct precision. - -negwrzero: or r6,r0,r0 ;clear low word - bb1 dsize,r9,negwrzerod ;branch to write double precision zero - br.n inf_return ;return from subroutine - set r6,r6,1<31> ;set sign bit -negwrzerod: or r5,r0,r0 ;clear high word - br.n inf_return ;return from subroutine - set r5,r5,1<31> ;set sign bit - -FP_inf_overflw: - set r2,r2,1<oper> ;set invalid operand bit -#ifdef HANDLER - bb0 oper,r3,nohandlero ;do not go to user handler routine - bsr _handler ;go to user handler routine - br inf_return ;return from subroutine -#endif - -nohandlero: bb0.n sign,r7,inf_return ;if positive then return from subroutine - - set r6,r6,31<0> ;set result to largest positive integer - or.c r6,r0,r6 ;negate r6,giving largest negative int. - -inf_return: ld r1,r31,0 ;load return address - jmp r1 ;return from subroutine - - data -;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; - -#define FADD denorm_FADD -#define FSUB denorm_FSUB -#define FCMP denorm_FCMP -#define FMUL denorm_FMUL -#define FDIV denorm_FDIV -#define NINT denorm_NINT -#define TRNC denorm_TRNC -#define return denorm_return -;function _denorm -- -;See the documentation for this release for an overall description of this -;code. - - global _denorm - text - -;Check to see if either S1 or S2 is a denormalized number. First -;extract the exponent to see if it is zero, and then check to see if -;the mantissa is not zero. If the number is denormalized, then set the -;1 or 0 bit 10 r12. - -_denorm: st r1,r31,0 ;save return address -dnmcheckS1: extu r10,r5,11<20> ;extract exponent - bcnd ne0,r10,dnmsetS2 ;S1 is not a denorm, so S2 must be - bb1.n 9,r9,dnmcheckS1d ;S1 is double precision - mak r10,r5,20<3> ;mak field with only mantissa bits - ;into final result -dnmcheckS1s: extu r11,r6,3<29> ;get three low bits of mantissa - or r10,r10,r11 ;assemble all of the mantissa bits - bcnd eq0,r10,dnmsetS2 ;S1 is not a denorm, so S2 must be - br dnmsetS1 ;S1 is a denorm - -dnmcheckS1d: or r10,r6,r10 ;or all of mantissa bits - bcnd eq0,r10,dnmsetS2 ;S1 is not a denorm, so S2 must be -dnmsetS1: set r12,r12,1<1> ;S1 is a denorm - -dnmcheckS2: extu r10,r7,11<20> ;extract exponent - bcnd ne0,r10,S1form ;S2 is not a denorm - bb1.n 7,r9,dnmcheckS2d ;S2 is double precision - mak r10,r7,20<3> ;mak field with only mantissa bits -dnmcheckS2s: extu r11,r8,3<29> ;get three low bits of mantissa - or r10,r10,r11 ;assemble all of the mantissa bits - bcnd eq0,r10,S1form ;S2 is not a denorm - br dnmsetS2 ;S1 is a denorm -dnmcheckS2d: or r10,r8,r10 ;or all or mantissa bits - bcnd eq0,r10,S1form ;S2 is not a denorm -dnmsetS2: set r12,r12,1<0> ;S2 is a denorm - - -;Since the operations are going to be reperformed with modified denorms, -;the operands which were initially single precision need to be modified -;back to single precision. - -S1form: bb1 9,r9,S2form ;S1 is double precision, so do not - ;modify S1 into single format - mak r11,r5,28<3> ; over final exponent and mantissa - ;eliminating extra 3 bits of exponent - extu r6,r6,3<29> ;get low 3 bits of mantissa - or r11,r6,r11 ;form complete mantissa and exponent - extu r10,r5,1<31> ;get the 31 bit - mak r10,r10,1<31> ;place 31 bit 10 correct position - or r6,r10,r11 ;or 31, exponent, and all of mantissa - -S2form: bb1 7,r9,checkop ;S2 is double precision, so do not - ;modify S2 into single format - mak r11,r7,28<3> ; over final exponent and mantissa - ;eliminating extra 3 bits of exponent - extu r8,r8,3<29> ;get low 3 bits of mantissa - or r11,r8,r11 ;form complete mantissa and exponent - extu r10,r7,1<31> ;get the 31 bit - mak r10,r10,1<31> ;place 31 bit 10 correct position - or r8,r10,r11 ;or 31, exponent, and all of mantissa - - -;Extract the opcode, compare to a constant, and branch to the code that -;deals with that opcode. - -checkop: extu r10,r9,5<11> ;extract opcode - cmp r11,r10,0x05 ;compare to FADD - bb1 2,r11,FADD ;operation is FADD - cmp r11,r10,0x06 ;compare to FSUB - bb1 2,r11,FSUB ;operation is FSUB - cmp r11,r10,0x07 ;compare to FCMP - bb1 2,r11,FCMP ;operation is FCMP - cmp r11,r10,0x00 ;compare to FMUL - bb1 2,r11,FMUL ;operation is FMUL - cmp r11,r10,0x0e ;compare to FDIV - bb1 2,r11,FDIV ;operation is FDIV -; cmp r11,r10,0x0f;compare to FSQRT -; bb1 2,r11,FSQRT ;operation is FSQRT - cmp r11,r10,0x09 ;compare to INT - bb1 2,r11,INT ;operation is INT - cmp r11,r10,0x0a ;compare to NINT - bb1 2,r11,NINT ;operation is NINT - cmp r11,r10,0x0b ;compare to TRNC - bb1 2,r11,TRNC ;operation is TRNC - - -;For all the following operations, the denormalized number is set to -;zero and the operation is reperformed the correct destination and source -;sizes. - -FADD: bb0 1,r12,FADDS2dnm ;S1 is not denorm, so S2 must be - or r5,r0,r0 ;set S1 to zero - or r6,r0,r0 -FADDS2chk: bb0 0,r12,FADDcalc ;S2 is not a denorm -FADDS2dnm: or r7,r0,r0 ;set S2 to zero - or r8,r0,r0 -FADDcalc: bb1 5,r9,FADDdD ;branch for double precision destination -FADDsD: bb1 9,r9,FADDsDdS1 ;branch for double precision S1 -FADDsDsS1: bb1 7,r9,FADDsDsS1dS2 ;branch for double precision S2 -FADDsDsS1sS2: br.n return ;return from subroutine - fadd.sss r6,r6,r8 ;add the two sources and place result 10 S1 -FADDsDsS1dS2: br.n return ;return from subroutine - fadd.ssd r6,r6,r7 ;add the two sources and place result 10 S1 -FADDsDdS1: bb1 7,r9,FADDsDdS1dS2 ;branch for double precision S2 -FADDsDdS1sS2: br.n return ;return from subroutine - fadd.sds r6,r5,r8 ;add the two sources and place result 10 S1 -FADDsDdS1dS2: br.n return ;return from subroutine - fadd.sdd r6,r5,r7 ;add the two sources and place result 10 S1 -FADDdD: bb1 9,r9,FADDdDdS1 ;branch for double precision S1 -FADDdDsS1: bb1 7,r9,FADDdDsS1dS2 ;branch for double precision S2 -FADDdDsS1sS2: br.n return ;return from subroutine - fadd.dss r5,r6,r8 ;add the two sources and place result 10 S1 -FADDdDsS1dS2: br.n return ;return from subroutine - fadd.dsd r5,r6,r7 ;add the two sources and place result 10 S1 -FADDdDdS1: bb1 7,r9,FADDdDdS1dS2 ;branch for double precision S2 -FADDdDdS1sS2: br.n return ;return from subroutine - fadd.dds r5,r5,r8 ;add the two sources and place result 10 S1 -FADDdDdS1dS2: br.n return ;return from subroutine - fadd.ddd r5,r5,r7 ;add the two sources and place result 10 S1 - -FSUB: bb0 1,r12,FSUBS2dnm ;S1 is not denorm, so S2 must be - or r5,r0,r0 ;set S1 to zero - or r6,r0,r0 -FSUBS2chk: bb0 0,r12,FSUBcalc ;S2 is not a denorm -FSUBS2dnm: or r7,r0,r0 ;set S2 to zero - or r8,r0,r0 -FSUBcalc: bb1 5,r9,FSUBdD ;branch for double precision destination -FSUBsD: bb1 9,r9,FSUBsDdS1 ;branch for double precision S1 -FSUBsDsS1: bb1 7,r9,FSUBsDsS1dS2 ;branch for double precision S2 -FSUBsDsS1sS2: br.n return ;return from subroutine - fsub.sss r6,r6,r8 ;add the two sources and place result 10 S1 -FSUBsDsS1dS2: br.n return ;return from subroutine - fsub.ssd r6,r6,r7 ;add the two sources and place result 10 S1 -FSUBsDdS1: bb1 7,r9,FSUBsDdS1dS2 ;branch for double precision S2 -FSUBsDdS1sS2: br.n return ;return from subroutine - fsub.sds r6,r5,r8 ;add the two sources and place result 10 S1 -FSUBsDdS1dS2: br.n return ;return from subroutine - fsub.sdd r6,r5,r7 ;add the two sources and place result 10 S1 -FSUBdD: bb1 9,r9,FSUBdDdS1 ;branch for double precision S1 -FSUBdDsS1: bb1 7,r9,FSUBdDsS1dS2 ;branch for double precision S2 -FSUBdDsS1sS2: br.n return ;return from subroutine - fsub.dss r5,r6,r8 ;add the two sources and place result 10 S1 -FSUBdDsS1dS2: br.n return ;return from subroutine - fsub.dsd r5,r6,r7 ;add the two sources and place result 10 S1 -FSUBdDdS1: bb1 7,r9,FSUBdDdS1dS2 ;branch for double precision S2 -FSUBdDdS1sS2: br.n return ;return from subroutine - fsub.dds r5,r5,r8 ;add the two sources and place result 10 S1 -FSUBdDdS1dS2: br.n return ;return from subroutine - fsub.ddd r5,r5,r7 ;add the two sources and place result 10 S1 - -FCMP: bb0 1,r12,FCMPS2dnm ;S1 is not denorm, so S2 must be - or r5,r0,r0 ;set S1 to zero - or r6,r0,r0 -FCMPS2chk: bb0 0,r12,FCMPcalc ;S2 is not a denorm -FCMPS2dnm: or r7,r0,r0 ;set S2 to zero - or r8,r0,r0 -FCMPcalc: bb1 9,r9,FCMPdS1 ;branch for double precision S1 -FCMPsS1: bb1 7,r9,FCMPsS1dS2 ;branch for double precision S2 -FCMPsS1sS2: br.n return ;return from subroutine - fcmp.sss r6,r6,r8 ;add the two sources and place result 10 S1 -FCMPsS1dS2: br.n return ;return from subroutine - fcmp.ssd r6,r6,r7 ;add the two sources and place result 10 S1 -FCMPdS1: bb1 7,r9,FCMPdS1dS2 ;branch for double precision S2 -FCMPdS1sS2: br.n return ;return from subroutine - fcmp.sds r6,r5,r8 ;add the two sources and place result 10 S1 -FCMPdS1dS2: br.n return ;return from subroutine - fcmp.sdd r6,r5,r7 ;add the two sources and place result 10 S1 - -FMUL: bb0 1,r12,FMULS2dnm ;S1 is not denorm, so S2 must be - or r5,r0,r0 ;set S1 to zero - or r6,r0,r0 -FMULS2chk: bb0 0,r12,FMULcalc ;S2 is not a denorm -FMULS2dnm: or r7,r0,r0 ;set S2 to zero - or r8,r0,r0 -FMULcalc: bb1 5,r9,FMULdD ;branch for double precision destination -FMULsD: bb1 9,r9,FMULsDdS1 ;branch for double precision S1 -FMULsDsS1: bb1 7,r9,FMULsDsS1dS2 ;branch for double precision S2 -FMULsDsS1sS2: br.n return ;return from subroutine - fmul.sss r6,r6,r8 ;add the two sources and place result 10 S1 -FMULsDsS1dS2: br.n return ;return from subroutine - fmul.ssd r6,r6,r7 ;add the two sources and place result 10 S1 -FMULsDdS1: bb1 7,r9,FMULsDdS1dS2 ;branch for double precision S2 -FMULsDdS1sS2: br.n return ;return from subroutine - fmul.sds r6,r5,r8 ;add the two sources and place result 10 S1 -FMULsDdS1dS2: br.n return ;return from subroutine - fmul.sdd r6,r5,r7 ;add the two sources and place result 10 S1 -FMULdD: bb1 9,r9,FMULdDdS1 ;branch for double precision S1 -FMULdDsS1: bb1 7,r9,FMULdDsS1dS2 ;branch for double precision S2 -FMULdDsS1sS2: br.n return ;return from subroutine - fmul.dss r5,r6,r8 ;add the two sources and place result 10 S1 -FMULdDsS1dS2: br.n return ;return from subroutine - fmul.dsd r5,r6,r7 ;add the two sources and place result 10 S1 -FMULdDdS1: bb1 7,r9,FMULdDdS1dS2 ;branch for double precision S2 -FMULdDdS1sS2: br.n return ;return from subroutine - fmul.dds r5,r5,r8 ;add the two sources and place result 10 S1 -FMULdDdS1dS2: br.n return ;return from subroutine - fmul.ddd r5,r5,r7 ;add the two sources and place result 10 S1 - -FDIV: bb0 1,r12,FDIVS2dnm ;S1 is not denorm, so S2 must be - or r5,r0,r0 ;set S1 to zero - or r6,r0,r0 -FDIVS2chk: bb0 0,r12,FDIVcalc ;S2 is not a denorm -FDIVS2dnm: or r7,r0,r0 ;set S2 to zero - or r8,r0,r0 -FDIVcalc: bb1 5,r9,FDIVdD ;branch for double precision destination -FDIVsD: bb1 9,r9,FDIVsDdS1 ;branch for double precision S1 -FDIVsDsS1: bb1 7,r9,FDIVsDsS1dS2 ;branch for double precision S2 -FDIVsDsS1sS2: fdiv.sss r6,r6,r8 ;add the two sources and place result 10 S1 - br return ;return from subroutine -FDIVsDsS1dS2: fdiv.ssd r6,r6,r7 ;add the two sources and place result 10 S1 - br return ;return from subroutine -FDIVsDdS1: bb1 7,r9,FDIVsDdS1dS2 ;branch for double precision S2 -FDIVsDdS1sS2: fdiv.sds r6,r5,r8 ;add the two sources and place result 10 S1 - br return ;return from subroutine -FDIVsDdS1dS2: fdiv.sdd r6,r5,r7 ;add the two sources and place result 10 S1 - br return ;return from subroutine -FDIVdD: bb1 9,r9,FDIVdDdS1 ;branch for double precision S1 -FDIVdDsS1: bb1 7,r9,FDIVdDsS1dS2 ;branch for double precision S2 -FDIVdDsS1sS2: fdiv.dss r5,r6,r8 ;add the two sources and place result 10 S1 - br return ;return from subroutine -FDIVdDsS1dS2: fdiv.dsd r5,r6,r7 ;add the two sources and place result 10 S1 - br return ;return from subroutine -FDIVdDdS1: bb1 7,r9,FDIVdDdS1dS2 ;branch for double precision S2 -FDIVdDdS1sS2: fdiv.dds r5,r5,r8 ;add the two sources and place result 10 S1 - br return ;return from subroutine -FDIVdDdS1dS2: fdiv.ddd r5,r5,r7 ;add the two sources and place result 10 S1 - br return ;return from subroutine - -;FSQRT: or r7,r0,r0 ;set S2 to zero -; or r8,r0,r0 -;FSQRTcalc: bb1 5,r9,FSQRTdD ;branch for double precision destination -;FSQRTsD: bb1 7,r9,FSQRTsDdS2 ;branch for double precision S2 -;FSQRTsDsS2: br.n return ;return from subroutine - ;fsqrt.ss r6,r8 ;add the two sources and place result 10 S1 -;FSQRTsDdS2: br.n return ;return from subroutine - ;fsqrt.sd r6,r7 ;add the two sources and place result 10 S1 -;FSQRTdD: bb1 7,r9,FSQRTdDdS2 ;branch for double precision S2 -;FSQRTdDsS2: br.n return ;return from subroutine - ;fsqrt.ds r5,r8 ;add the two sources and place result 10 S1 -;FSQRTdDdS2: br.n return ;return from subroutine - ;fsqrt.dd r5,r7 ;add the two sources and place result 10 S1 - -INT: or r7,r0,r0 ;set S2 to zero - or r8,r0,r0 -INTcalc: bb1 7,r9,INTdS2 ;branch for double precision S2 -INTsS2: br.n return ;return from subroutine - int.ss r6,r8 ;add the two sources and place result 10 S1 -INTdS2: br.n return ;return from subroutine - int.sd r6,r7 ;add the two sources and place result 10 S1 - -NINT: or r7,r0,r0 ;set S2 to zero - or r8,r0,r0 -NINTcalc: bb1 7,r9,NINTdS2 ;branch for double precision S2 -NINTsS2: br.n return ;return from subroutine - nint.ss r6,r8 ;add the two sources and place result 10 S1 -NINTdS2: br.n return ;return from subroutine - nint.sd r6,r7 ;add the two sources and place result 10 S1 - -TRNC: or r7,r0,r0 ;set S2 to zero - or r8,r0,r0 -TRNCcalc: bb1 7,r9,TRNCdS2 ;branch for double precision S2 -TRNCsS2: br.n return ;return from subroutine - trnc.ss r6,r8 ;add the two sources and place result 10 S1 -TRNCdS2: trnc.sd r6,r7 ;add the two sources and place result 10 S1 - - -;Return to the routine that detected the reserved operand. - -return: ld r1,r31,0 ;load return address - jmp r1 ;return from subroutine - - data -;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; - -#ifndef __LUNA_SUB_H__ -#include "luna_sub.h" -#endif - global _zero - text - -;S1 and/or S2 is an infinity, and the other operand may be a zero. -;Knowing which operands are infinity, check the remaining operands for zeros. - -_zero: bb0 s1inf,r12,S1noinf ;see if S1 is zero - bb0 s2inf,r12,S2noinf ;see if S2 is zero - jmp r1 ;return from function - -;See if S1 is zero. Whether or not S1 is a zero, being in this routine -;implies that S2 is infinity, so return to subroutine infinity after -;completing this code. Set the s1zero flag in r12 if S1 is zero. - -S1noinf: bb1 s1size,r9,S1noinfd ;work with double precision operand -S1noinfs: or r10,r0,r5 ;load high word into r10 - clr r10,r10,1<sign> ;clear the sign bit - extu r11,r6,3<29> ;extract lower 3 bits of mantissa - or r10,r10,r11 ;or these 3 bits with high word - bcnd ne0,r10,operation ;do not set zero flag - jmp.n r1 ;since this operand was not infinity, - ;S2 must have been, so return from - ;function - set r12,r12,1<s1zero> ;set zeroflag -S1noinfd: clr r10,r5,1<sign> ;clear the sign bit - or r10,r6,r10 ;or high and low word - bcnd ne0,r10,operation ;do not set zero flag - jmp.n r1 ;since this operand was not infinity, - ;S2 must have been, so return from - ;function - set r12,r12,1<s1zero> ;set zeroflag - - -;Check S2 for zero. If it is zero, then set the s2zero flag in r12. - -S2noinf: bb1 s2size,r9,S2noinfd ;work with double precision operand -S2noinfs: or r10,r0,r7 ;load high word into r10 - clr r10,r10,1<sign> ;clear the sign bit - extu r11,r8,3<29> ;extract lower 3 bits of mantissa - or r10,r10,r11 ;or these 3 bits with high word - bcnd ne0,r10,operation ;do not set zero flag - jmp.n r1 ;since this operand was not infinity, - ;S1 must have been, so return from - ;function - set r12,r12,1<s2zero> ;set zeroflag -S2noinfd: clr r10,r7,1<sign> ;clear the sign bit - or r10,r8,r10 ;or high and low word - bcnd ne0,r10,operation ;do not set zero flag - set r12,r12,1<s2zero> ;set zeroflag - ;since this operand was not infinity, - ;S1 must have been, so return from - ;function -operation: jmp r1 ;return from function - - data -;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -;;;; - - text - align 4 -; input: r3 is the excepton frame -_Xfp_imprecise: global _Xfp_imprecise - or r29, r3, r0 ; r29 is now the E.F. - subu r31, r31, 40 - st r1, r31, 32 - st r29, r31, 36 - - ld r2 , r29, EF_FPSR * 4 - ld r3 , r29, EF_FPCR * 4 - ld r4 , r29, EF_FPECR * 4 - ld r10, r29, EF_FPRH * 4 - ld r11, r29, EF_FPRL * 4 - ld r12, r29, EF_FPIT * 4 - -;Load into r1 the return address for the exception handlers. Looking -;at FPECR, branch to the appropriate exception handler. - - or.u r1,r0,hi16(fpui_wrapup);load return address of functions - or r1,r1,lo16(fpui_wrapup) - - bb0 2,r4,2f ;branch to FPunderflow if bit set - br _FPunderflow - 2: bb0 1,r4,3f ;branch to FPoverflow if bit set - br _FPoverflow - 3: -#ifdef HANDLER - br _handler ;branch to handler since bit will be set - ;for inexact -#endif - /* should never get here!!!! */ - data - align 4 - 1: string "error in inprecise fp exception handler, r4 is 0x%08x\n\0" - align 4 - text - or.u r2, r0, hi16(1b) - or r2, r2, lo16(1b) - or r3, r4, r0 - bsr _printf - or.u r2, r0, hi16(1b) - or r2, r2, lo16(1b) - bsr _panic - -fpui_wrapup: - tb1 0,r0,0 ;make sure all floating point operations - ldcr r5, psr ;load the PSR - ;have finished - or r5, r5, 0x2 ;disable interrupts - stcr r5, psr -#if 0 -Why is this done? -- it screws up things later. - or r5, r5, 0x8 ;set SFU 1 disable bit, disable SFU 1 - stcr r5, psr -#endif - ld r1, r31, 32 - ld r29,r31, 36 - addu r31, r31, 40 - - ; write back the results - extu r2, r12, 5<0> - addu r3, r29, EF_R0*4 - bb0 destsize, r12, Iwritesingle - st r10, r3 [r2] - addu r2, r2, 1 - clr r2, r2, 27<5> -Iwritesingle: - st r11, r3 [r2] -;Return.. - jmp r1 diff --git a/sys/arch/mvme88k/mvme88k/machdep.c b/sys/arch/mvme88k/mvme88k/machdep.c deleted file mode 100644 index 74a646b8719..00000000000 --- a/sys/arch/mvme88k/mvme88k/machdep.c +++ /dev/null @@ -1,1372 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ -/* - * HISTORY - */ - -#include <sys/param.h> -#include <sys/systm.h> -#include <sys/signalvar.h> -#include <sys/kernel.h> -#include <sys/map.h> -#include <sys/proc.h> -#include <sys/buf.h> -#include <sys/reboot.h> -#include <sys/conf.h> -#include <sys/file.h> -#include <sys/clist.h> -#include <sys/callout.h> -#include <sys/malloc.h> -#include <sys/mbuf.h> -#include <sys/msgbuf.h> -#include <sys/ioctl.h> -#include <sys/tty.h> -#include <sys/mount.h> -#include <sys/user.h> -#include <sys/exec.h> -#include <sys/vnode.h> -#include <sys/sysctl.h> -#include <sys/errno.h> -#ifdef SYSVMSG -#include <sys/msg.h> -#endif -#ifdef SYSVSEM -#include <sys/sem.h> -#endif -#ifdef SYSVSHM -#include <sys/shm.h> -#endif - -#include <machine/cpu.h> -#include <machine/reg.h> -#include <machine/psl.h> -#include <machine/locore.h> -#include <machine/board.h> -#include <machine/trap.h> -#include <machine/bug.h> - -#include <dev/cons.h> - -#include <vm/vm.h> -#include <vm/vm_map.h> -#include <vm/vm_kern.h> -#include <vm/vm_page.h> -#define __IS_MACHDEP_C__ -#include <assym.s> /* EF_EPSR, etc. */ -#include <machine/m88100.h> /* DMT_VALID */ -#include <machine/m882xx.h> /* CMMU stuff */ -#if DDB -# include <machine/db_machdep.h> -#endif /* DDB */ - -#if 0 -#include <machine/m88100.h> /* DMT_VALID */ -#include <machine/m882xx.h> /* CMMU stuff */ -#include <vm/vm.h> -#include <vm/vm_kern.h> /* kernel_map */ -#include <sys/param.h> -#include <sys/msgbuf.h> -#include <sys/buf.h> -#include <machine/locore.h> /* USERMODE */ -/* -#include <machine/nvram.h> -*/ -#include <sys/types.h> -#endif /* 0 */ - -static int waittime = -1; - -static void level0_intr(int, unsigned *); -static void level1_intr(int, unsigned *); -static void level2_intr(int, unsigned *); -static void level3_intr(int, unsigned *); -static void level4_intr(int, unsigned *); -static void level5_intr(int, unsigned *); -static void level6_intr(int, unsigned *); -static void level7_intr(int, unsigned *); - -unsigned char *ivec[] = { - (unsigned char *)0xFFFE007, - (unsigned char *)0xFFFE00B, - (unsigned char *)0xFFFE00F, - (unsigned char *)0xFFFE013, - (unsigned char *)0xFFFE017, - (unsigned char *)0xFFFE01B, - (unsigned char *)0xFFFE01F, -}; - -static void (*int_handler[8])() = -{ - level0_intr, - level1_intr, - level2_intr, - level3_intr, - level4_intr, - level5_intr, - level6_intr, - level7_intr, -}; - -unsigned char *int_mask_level = (unsigned char *)INT_MASK_LEVEL; -unsigned char *int_pri_level = (unsigned char *)INT_PRI_LEVEL; -unsigned char *iackaddr; - -int physmem; /* available physical memory, in pages */ -int cold; -vm_offset_t avail_end, avail_start, avail_next; -int msgbufmapped = 0; -int foodebug = 0; -int longformat = 0; - -extern char kstack[]; /* kernel stack - actually this is == UADDR */ -extern char *cpu_string; -extern short exframesize[]; - -/* - * Declare these as initialized data so we can patch them. - */ -int nswbuf = 0; -#ifdef NBUF -int nbuf = NBUF; -#else -int nbuf = 0; -#endif -#ifdef BUFPAGES -int bufpages = BUFPAGES; -#else -int bufpages = 0; -#endif -int *nofault; - -caddr_t allocsys __P((caddr_t)); - -/* - * Info for CTL_HW - */ -char machine[] = "MVME187"; /* cpu "architecture" */ -char cpu_model[120]; -extern char version[]; - - /* - * Console initialization: called early on from main, - * before vm init or startup. Do enough configuration - * to choose and initialize a console. - */ -void -consinit() -{ - - /* - * Initialize the console before we print anything out. - */ - cninit(); - -#if defined (DDB) - kdb_init(); - if (boothowto & RB_KDB) - Debugger(); -#endif -} - -/* - * Figure out how much real memory is available. - * Start looking from the megabyte after the end of the kernel data, - * until we find non-memory. - */ -vm_offset_t -size_memory(void) -{ - volatile unsigned int *look; - unsigned int *max; - extern char end[]; - #define PATTERN 0x5a5a5a5a - #define STRIDE (4*1024) /* 4k at a time */ - #define Roundup(value, stride) (((unsigned)(value) + (stride) - 1) & ~((stride)-1)) - - /* - * count it up. - */ - max = (void*)MAXPHYSMEM; - for (look = (void*)Roundup(end, STRIDE); look < max; - look = (int*)((unsigned)look + STRIDE)) { - unsigned save; - - /* if can't access, we've reached the end */ - if (foodebug) - printf("%x\n", look); - if (badwordaddr((vm_offset_t)look)) { - printf("%x\n", look); - look = (int *)((int)look - STRIDE); - break; - } - -#if 1 - /* - * If we write a value, we expect to read the same value back. - * We'll do this twice, the 2nd time with the opposite bit - * pattern from the first, to make sure we check all bits. - */ - save = *look; - if (*look = PATTERN, *look != PATTERN) - break; - if (*look = ~PATTERN, *look != ~PATTERN) - break; - *look = save; -#endif - } - - physmem = btoc(trunc_page((unsigned)look)); /* in pages */ - return(trunc_page((unsigned)look)); -} - -void -identifycpu() -{ - /* XXX -take this one out. It can be done in m187_bootstrap() */ - strcpy(cpu_model, "Motorola M88K"); - printf("Model: %s\n", cpu_model); -} - -/* The following two functions assume UPAGES == 3 */ -#if UPAGES != 3 -#error "UPAGES changed?" -#endif - -void -save_u_area(struct proc *p, vm_offset_t va) -{ - p->p_md.md_upte[0] = kvtopte(va)->bits; - p->p_md.md_upte[1] = kvtopte(va + NBPG)->bits; - p->p_md.md_upte[2] = kvtopte(va + NBPG + NBPG)->bits; -} - -void -load_u_area(struct proc *p) -{ - pte_template_t *t; - - t = kvtopte(UADDR); - t->bits = p->p_md.md_upte[0]; - t = kvtopte(UADDR + NBPG); - t->bits = p->p_md.md_upte[1]; - t = kvtopte(UADDR + NBPG + NBPG); - t->bits = p->p_md.md_upte[2]; - cmmu_flush_tlb(1, UADDR, 3 * NBPG); -} - - -void -cpu_startup() -{ - caddr_t v; - int sz, i; - vm_size_t size; - int base, residual; - vm_offset_t minaddr, maxaddr, uarea_pages; - extern vm_offset_t miniroot; - - /* - * Initialize error message buffer (at end of core). - * avail_end was pre-decremented in m1x7_init. - */ - for (i = 0; i < btoc(sizeof(struct msgbuf)); i++) - pmap_enter(kernel_pmap, (vm_offset_t)msgbufp, - avail_end + i * NBPG, VM_PROT_ALL, TRUE); - msgbufmapped = 1; - - printf(version); - identifycpu(); - printf("real mem = %d\n", ctob(physmem)); - - /* - * Find out how much space we need, allocate it, - * and then give everything true virtual addresses. - */ - sz = (int)allocsys((caddr_t)0); - if ((v = (caddr_t)kmem_alloc(kernel_map, round_page(sz))) == 0) - panic("startup: no room for tables"); - if (allocsys(v) - v != sz) - panic("startup: table size inconsistency"); - - /* - * Grab UADDR virtual address - */ - - uarea_pages = UADDR; - - vm_map_find(kernel_map, vm_object_allocate(PAGE_SIZE * UPAGES), 0, - (vm_offset_t *)&uarea_pages, PAGE_SIZE * UPAGES, TRUE); - - if (uarea_pages != UADDR) { - printf("uarea_pages %x: UADDR not free\n", uarea_pages); - panic("bad UADDR"); - } - /* - * Now allocate buffers proper. They are different than the above - * in that they usually occupy more virtual memory than physical. - */ - size = MAXBSIZE * nbuf; - buffer_map = kmem_suballoc(kernel_map, (vm_offset_t *)&buffers, - &maxaddr, size, TRUE); - minaddr = (vm_offset_t)buffers; - if (vm_map_find(buffer_map, vm_object_allocate(size), (vm_offset_t)0, - (vm_offset_t *)&minaddr, size, FALSE) != KERN_SUCCESS) - panic("startup: cannot allocate buffers"); - if ((bufpages / nbuf) >= btoc(MAXBSIZE)) { - /* don't want to alloc more physical mem than needed */ - bufpages = btoc(MAXBSIZE) * nbuf; - } - base = bufpages / nbuf; - residual = bufpages % nbuf; - for (i = 0; i < nbuf; i++) { - vm_size_t curbufsize; - vm_offset_t curbuf; - - /* - * First <residual> buffers get (base+1) physical pages - * allocated for them. The rest get (base) physical pages. - * - * The rest of each buffer occupies virtual space, - * but has no physical memory allocated for it. - */ - curbuf = (vm_offset_t)buffers + i * MAXBSIZE; - curbufsize = CLBYTES * (i < residual ? base+1 : base); - vm_map_pageable(buffer_map, curbuf, curbuf+curbufsize, FALSE); - vm_map_simplify(buffer_map, curbuf); - } - - /* - * Allocate a submap for exec arguments. This map effectively - * limits the number of processes exec'ing at any time. - */ - exec_map = kmem_suballoc(kernel_map, &minaddr, &maxaddr, - 16*NCARGS, TRUE); - - /* - * Allocate a map for IO. - */ - phys_map = vm_map_create(kernel_pmap, IO_SPACE_START, - IO_SPACE_END, TRUE); - if (phys_map == NULL) - panic("cpu_startup: unable to create physmap"); - - /* - * Finally, allocate mbuf pool. Since mclrefcnt is an off-size - * we use the more space efficient malloc in place of kmem_alloc. - */ - mclrefcnt = (char *)malloc(NMBCLUSTERS+CLBYTES/MCLBYTES, - M_MBUF, M_NOWAIT); - bzero(mclrefcnt, NMBCLUSTERS+CLBYTES/MCLBYTES); - mb_map = kmem_suballoc(kernel_map, (vm_offset_t *)&mbutl, &maxaddr, - VM_MBUF_SIZE, FALSE); - - /* - * Initialize callouts - */ - callfree = callout; - for (i = 1; i < ncallout; i++) - callout[i-1].c_next = &callout[i]; - callout[i-1].c_next = NULL; - - printf("avail mem = %d\n", ptoa(cnt.v_free_count)); - printf("using %d buffers containing %d bytes of memory\n", - nbuf, bufpages * CLBYTES); - - mfs_initminiroot(miniroot); - /* - * Set up buffers, so they can be used to read disk labels. - */ - bufinit(); - - /* - * Configure the system. - */ - nofault = NULL; - if (boothowto & RB_CONFIG) { -#ifdef BOOT_CONFIG - user_config(); -#else - printf("kernel does not support -c; continuing..\n"); -#endif - } - configure(); - - dumpconf(); -} - -/* - * Allocate space for system data structures. We are given - * a starting virtual address and we return a final virtual - * address; along the way we set each data structure pointer. - * - * We call allocsys() with 0 to find out how much space we want, - * allocate that much and fill it with zeroes, and then call - * allocsys() again with the correct base virtual address. - */ -caddr_t -allocsys(v) - register caddr_t v; -{ - -#define valloc(name, type, num) \ - v = (caddr_t)(((name) = (type *)v) + (num)) - -#ifdef REAL_CLISTS - valloc(cfree, struct cblock, nclist); -#endif - valloc(callout, struct callout, ncallout); - valloc(swapmap, struct map, nswapmap = maxproc * 2); -#ifdef SYSVSHM - valloc(shmsegs, struct shmid_ds, shminfo.shmmni); -#endif -#ifdef SYSVSEM - valloc(sema, struct semid_ds, seminfo.semmni); - valloc(sem, struct sem, seminfo.semmns); - /* This is pretty disgusting! */ - valloc(semu, int, (seminfo.semmnu * seminfo.semusz) / sizeof(int)); -#endif -#ifdef SYSVMSG - valloc(msgpool, char, msginfo.msgmax); - valloc(msgmaps, struct msgmap, msginfo.msgseg); - valloc(msghdrs, struct msg, msginfo.msgtql); - valloc(msqids, struct msqid_ds, msginfo.msgmni); -#endif - - /* - * Determine how many buffers to allocate (enough to - * hold 5% of total physical memory, but at least 16). - * Allocate 1/2 as many swap buffer headers as file i/o buffers. - */ - if (bufpages == 0) - if (physmem < btoc(2 * 1024 * 1024)) - bufpages = (physmem / 10) / CLSIZE; - else - bufpages = (physmem / 20) / CLSIZE; - if (nbuf == 0) { - nbuf = bufpages; - if (nbuf < 16) - nbuf = 16; - } - if (nswbuf == 0) { - nswbuf = (nbuf / 2) &~ 1; /* force even */ - if (nswbuf > 256) - nswbuf = 256; /* sanity */ - } - valloc(swbuf, struct buf, nswbuf); - valloc(buf, struct buf, nbuf); - return v; -} - -/* - * Set registers on exec. - * Clear all except sp and pc. - */ -/* ARGSUSED */ -void -setregs(p, pack, stack, retval) - struct proc *p; - struct exec_package *pack; - u_long stack; - int retval[2]; -{ - register struct trapframe *tf = p->p_md.md_tf; - register int psr; - - /* - * The syscall will ``return'' to snip; set it. - * Set the rest of the registers to 0 except for r31 (stack pointer, - * built in exec()) and psr (supervisor bit). - */ - psr = tf->epsr & PSR_SUPERVISOR_MODE_BIT; -#if 0 - /* - I don't think I need to mess with fpstate on 88k because - we make sure the floating point pipeline is drained in - locore.s. Should check on this later. Nivas. - */ - - if ((fs = p->p_md.md_fpstate) != NULL) { - /* - * We hold an FPU state. If we own *the* FPU chip state - * we must get rid of it, and the only way to do that is - * to save it. In any case, get rid of our FPU state. - */ - if (p == fpproc) { - savefpstate(fs); - fpproc = NULL; - } - free((void *)fs, M_SUBPROC); - p->p_md.md_fpstate = NULL; - } -#endif /* 0 */ - bzero((caddr_t)tf, sizeof *tf); - tf->epsr = psr; - tf->snip = pack->ep_entry & ~3; - tf->sfip = tf->snip + 4; - tf->r[31] = stack; - retval[1] = 0; -} - -/* - * WARNING: code in locore.s assumes the layout shown for sf_signum - * thru sf_handler so... don't screw with them! - */ -struct sigframe { - int sf_signo; /* signo for handler */ - int sf_code; /* additional info for handler */ - struct sigcontext *sf_scp; /* context ptr for handler */ - sig_t sf_handler; /* handler addr for u_sigc */ - struct sigcontext sf_sc; /* actual context */ -}; - -#ifdef DEBUG -int sigdebug = 0; -int sigpid = 0; -#define SDB_FOLLOW 0x01 -#define SDB_KSTACK 0x02 -#define SDB_FPSTATE 0x04 -#endif - -/* - * Send an interrupt to process. - */ -void -sendsig(catcher, sig, mask, code) - sig_t catcher; - int sig, mask; - unsigned long code; -{ - register struct proc *p = curproc; - register struct trapframe *tf; - register struct sigacts *psp = p->p_sigacts; - struct sigframe *fp; - int oonstack, fsize; - struct sigframe sf; - int addr; - extern char sigcode[], esigcode[]; - -#define szsigcode (esigcode - sigcode) - - tf = p->p_md.md_tf; - oonstack = psp->ps_sigstk.ss_flags & SA_ONSTACK; - /* - * Allocate and validate space for the signal handler - * context. Note that if the stack is in data space, the - * call to grow() is a nop, and the copyout() - * will fail if the process has not already allocated - * the space with a `brk'. - */ - fsize = sizeof(struct sigframe); - if ((psp->ps_flags & SAS_ALTSTACK) && - (psp->ps_sigstk.ss_flags & SA_ONSTACK) == 0 && - (psp->ps_sigonstack & sigmask(sig))) { - fp = (struct sigframe *)(psp->ps_sigstk.ss_sp + - psp->ps_sigstk.ss_size - fsize); - psp->ps_sigstk.ss_flags |= SA_ONSTACK; - } else - fp = (struct sigframe *)(tf->r[31] - fsize); - if ((unsigned)fp <= USRSTACK - ctob(p->p_vmspace->vm_ssize)) - (void)grow(p, (unsigned)fp); -#ifdef DEBUG - if ((sigdebug & SDB_FOLLOW) || - (sigdebug & SDB_KSTACK) && p->p_pid == sigpid) - printf("sendsig(%d): sig %d ssp %x usp %x scp %x\n", - p->p_pid, sig, &oonstack, fp, &fp->sf_sc); -#endif - /* - * Build the signal context to be used by sigreturn. - */ - sf.sf_signo = sig; - sf.sf_code = code; - sf.sf_scp = &fp->sf_sc; - sf.sf_sc.sc_onstack = oonstack; - sf.sf_sc.sc_mask = mask; - /* - * Copy the whole user context into signal context that we - * are building. - */ - - bcopy((caddr_t)tf->r, (caddr_t)sf.sf_sc.sc_regs, - sizeof(sf.sf_sc.sc_regs)); - sf.sf_sc.sc_xip = tf->sxip; - sf.sf_sc.sc_nip = tf->snip; - sf.sf_sc.sc_fip = tf->sfip; - sf.sf_sc.sc_ps = tf->epsr; - sf.sf_sc.sc_sp = tf->r[31]; - sf.sf_sc.sc_fpsr = tf->fpsr; - sf.sf_sc.sc_fpcr = tf->fpcr; - sf.sf_sc.sc_ssbr = tf->ssbr; - sf.sf_sc.sc_dmt0 = tf->dmt0; - sf.sf_sc.sc_dmd0 = tf->dmd0; - sf.sf_sc.sc_dma0 = tf->dma0; - sf.sf_sc.sc_dmt1 = tf->dmt1; - sf.sf_sc.sc_dmd1 = tf->dmd1; - sf.sf_sc.sc_dma1 = tf->dma1; - sf.sf_sc.sc_dmt2 = tf->dmt2; - sf.sf_sc.sc_dmd2 = tf->dmd2; - sf.sf_sc.sc_dma2 = tf->dma2; - sf.sf_sc.sc_fpecr = tf->fpecr; - sf.sf_sc.sc_fphs1 = tf->fphs1; - sf.sf_sc.sc_fpls1 = tf->fpls1; - sf.sf_sc.sc_fphs2 = tf->fphs2; - sf.sf_sc.sc_fpls2 = tf->fpls2; - sf.sf_sc.sc_fppt = tf->fppt; - sf.sf_sc.sc_fprh = tf->fprh; - sf.sf_sc.sc_fprl = tf->fprl; - sf.sf_sc.sc_fpit = tf->fpit; - if (copyout((caddr_t)&sf, (caddr_t)&fp, sizeof sf)) { - /* - * Process has trashed its stack; give it an illegal - * instruction to halt it in its tracks. - */ - SIGACTION(p, SIGILL) = SIG_DFL; - sig = sigmask(SIGILL); - p->p_sigignore &= ~sig; - p->p_sigcatch &= ~sig; - p->p_sigmask &= ~sig; - psignal(p, SIGILL); - return; - } - /* - * Build the argument list for the signal handler. - * Signal trampoline code is at base of user stack. - */ - addr = (int)PS_STRINGS - szsigcode; - tf->snip = addr & ~3; - tf->sfip = tf->snip + 4; - tf->r[31] = (unsigned)fp; -#ifdef DEBUG - if ((sigdebug & SDB_FOLLOW) || - (sigdebug & SDB_KSTACK) && p->p_pid == sigpid) - printf("sendsig(%d): sig %d returns\n", - p->p_pid, sig); -#endif -} - -/* - * System call to cleanup state after a signal - * has been taken. Reset signal mask and - * stack state from context left by sendsig (above). - * Return to previous pc and psl as specified by - * context left by sendsig. Check carefully to - * make sure that the user has not modified the - * psl to gain improper priviledges or to cause - * a machine fault. - */ -/* ARGSUSED */ -sys_sigreturn(p, v, retval) - struct proc *p; - void *v; - int *retval; -{ - struct sys_sigreturn_args /* { - syscallarg(struct sigcontext *) sigcntxp; - } */ *uap = v; - register struct sigcontext *scp; - register struct trapframe *tf; - struct sigcontext ksc; - int error; - - scp = SCARG(uap, sigcntxp); -#ifdef DEBUG - if (sigdebug & SDB_FOLLOW) - printf("sigreturn: pid %d, scp %x\n", p->p_pid, scp); -#endif - if ((int)scp & 3 || useracc((caddr_t)scp, sizeof *scp, B_WRITE) == 0) - return (EINVAL); - tf = p->p_md.md_tf; - /* - * xip, nip and fip must be multiples of 4. This is all - * that is required; if it holds, just do it. - */ - if (((scp->sc_xip | scp->sc_nip | scp->sc_fip) & 3) != 0) - return (EINVAL); - bcopy((caddr_t)scp->sc_regs, (caddr_t)tf->r, - sizeof(scp->sc_regs)); - tf->sxip = scp->sc_xip; - tf->snip = scp->sc_nip; - tf->sfip = scp->sc_fip; - tf->epsr = scp->sc_ps; - tf->r[31] = scp->sc_sp; - tf->fpsr = scp->sc_fpsr; - tf->fpcr = scp->sc_fpcr; - tf->ssbr = scp->sc_ssbr; - tf->dmt0 = scp->sc_dmt0; - tf->dmd0 = scp->sc_dmd0; - tf->dma0 = scp->sc_dma0; - tf->dmt1 = scp->sc_dmt1; - tf->dmd1 = scp->sc_dmd1; - tf->dma1 = scp->sc_dma1; - tf->dmt2 = scp->sc_dmt2; - tf->dmd2 = scp->sc_dmd2; - tf->dma2 = scp->sc_dma2; - tf->fpecr = scp->sc_fpecr; - tf->fphs1 = scp->sc_fphs1; - tf->fpls1 = scp->sc_fpls1; - tf->fphs2 = scp->sc_fphs2; - tf->fpls2 = scp->sc_fpls2; - tf->fppt = scp->sc_fppt; - tf->fprh = scp->sc_fprh; - tf->fprl = scp->sc_fprl; - tf->fpit = scp->sc_fpit; - - tf->epsr = scp->sc_ps; - - /* - * Restore the user supplied information - */ - if (scp->sc_onstack & 01) - p->p_sigacts->ps_sigstk.ss_flags |= SA_ONSTACK; - else - p->p_sigacts->ps_sigstk.ss_flags &= ~SA_ONSTACK; - p->p_sigmask = scp->sc_mask &~ sigcantmask; - return (EJUSTRETURN); -} - -void -bootsync(void) -{ - if (waittime < 0) { - register struct buf *bp; - int iter, nbusy; - - waittime = 0; - (void) spl0(); - printf("syncing disks... "); - /* - * Release vnodes held by texts before sync. - */ - if (panicstr == 0) - vnode_pager_umount(NULL); - sync(&proc0, (void *)NULL, (int *)NULL); - - for (iter = 0; iter < 20; iter++) { - nbusy = 0; - for (bp = &buf[nbuf]; --bp >= buf; ) - if ((bp->b_flags & (B_BUSY|B_INVAL)) == B_BUSY) - nbusy++; - if (nbusy == 0) - break; - printf("%d ", nbusy); - delay(40000 * iter); - } - if (nbusy) - printf("giving up\n"); - else - printf("done\n"); - /* - * If we've been adjusting the clock, the todr - * will be out of synch; adjust it now unless - * the system was sitting in ddb. - */ - if ((howto & RB_TIMEBAD) == 0) { - resettodr(); - } else { - printf("WARNING: not updating battery clock\n"); - } - } -} - -doboot() -{ - bugreturn(); -} - -void -boot(howto) - register int howto; -{ - /* take a snap shot before clobbering any registers */ - if (curproc) - savectx(curproc->p_addr, 0); - - boothowto = howto; - if ((howto&RB_NOSYNC) == 0) - bootsync(); - splhigh(); /* extreme priority */ - if (howto&RB_HALT) { - printf("halted\n\n"); - bugreturn(); - } else { - if (howto & RB_DUMP) - dumpsys(); - doboot(); - /*NOTREACHED*/ - } - /*NOTREACHED*/ -} - -unsigned dumpmag = 0x8fca0101; /* magic number for savecore */ -int dumpsize = 0; /* also for savecore */ -long dumplo = 0; - -dumpconf() -{ - int nblks; - - dumpsize = physmem; - if (dumpdev != NODEV && bdevsw[major(dumpdev)].d_psize) { - nblks = (*bdevsw[major(dumpdev)].d_psize)(dumpdev); - if (dumpsize > btoc(dbtob(nblks - dumplo))) - dumpsize = btoc(dbtob(nblks - dumplo)); - else if (dumplo == 0) - dumplo = nblks - btodb(ctob(physmem)); - } - /* - * Don't dump on the first CLBYTES (why CLBYTES?) - * in case the dump device includes a disk label. - */ - if (dumplo < btodb(CLBYTES)) - dumplo = btodb(CLBYTES); -} - -/* - * Doadump comes here after turning off memory management and - * getting on the dump stack, either when called above, or by - * the auto-restart code. - */ -dumpsys() -{ - - msgbufmapped = 0; - if (dumpdev == NODEV) - return; - /* - * For dumps during autoconfiguration, - * if dump device has already configured... - */ - if (dumpsize == 0) - dumpconf(); - if (dumplo < 0) - return; - printf("\ndumping to dev %x, offset %d\n", dumpdev, dumplo); - printf("dump "); - switch ((*bdevsw[major(dumpdev)].d_dump)(dumpdev)) { - - case ENXIO: - printf("device bad\n"); - break; - - case EFAULT: - printf("device not ready\n"); - break; - - case EINVAL: - printf("area improper\n"); - break; - - case EIO: - printf("i/o error\n"); - break; - - default: - printf("succeeded\n"); - break; - } -} - -/* - * Return the best possible estimate of the time in the timeval - * to which tvp points. We do this by returning the current time - * plus the amount of time since the last clock interrupt (clock.c:clkread). - * - * Check that this time is no less than any previously-reported time, - * which could happen around the time of a clock adjustment. Just for fun, - * we guarantee that the time will be greater than the value obtained by a - * previous call. - */ -void -microtime(tvp) - register struct timeval *tvp; -{ - int s = splhigh(); - static struct timeval lasttime; - - *tvp = time; - tvp->tv_usec += clkread(); - while (tvp->tv_usec > 1000000) { - tvp->tv_sec++; - tvp->tv_usec -= 1000000; - } - if (tvp->tv_sec == lasttime.tv_sec && - tvp->tv_usec <= lasttime.tv_usec && - (tvp->tv_usec = lasttime.tv_usec + 1) > 1000000) { - tvp->tv_sec++; - tvp->tv_usec -= 1000000; - } - lasttime = *tvp; - splx(s); -} - -#ifdef PGINPROF -/* - * Return the difference (in microseconds) - * between the current time and a previous - * time as represented by the arguments. - * If there is a pending clock interrupt - * which has not been serviced due to high - * ipl, return error code. - */ -unsigned vmtime(int otime, int olbolt, int oicr) -{ - return ((time.tv_sec-otime)*60 + lbolt-olbolt)*16667; -} -#endif /* PGINPROF */ - -badwordaddr(void *addr) -{ - return badaddr((vm_offset_t)addr, 4); -} - -/* returns positive if memory is not there; */ -unsigned check_memory(void *addr, unsigned flag) -{ - return badaddr((vm_offset_t)addr, 1); -} - -void start_clock(void) -{ - printf("Start clock\n"); -} - -static void -level0_intr(int level, unsigned *frame) -{ - printf("Spurious interrupt\n"); -} - -static void -level1_intr(int level, unsigned *frame) -{ - register char vec; - iackaddr = ivec[level]; - - /* generate IACK and get the vector */ - asm volatile ("ld.b %0,%1" : "=r" (vec) : "" (iackaddr)); -} -#if 0 -static void -level1_intr(int level, unsigned *frame) -{ - register char vec; - iackaddr = ivec[level]; - - /* generate IACK and get the vector */ - asm volatile ("ld.b %0,%1" : "=r" (vec) : "" (iackaddr)); -} -#endif - -static void -level2_intr(int level, unsigned *frame) -{ - iackaddr = ivec[level]; -} - -static void -level3_intr(int level, unsigned *frame) -{ - iackaddr = ivec[level]; -} - -static void -level4_intr(int level, unsigned *frame) -{ - iackaddr = ivec[level]; -} - -static void -level5_intr(int level, unsigned *frame) -{ - iackaddr = ivec[level]; -} - -static void -level6_intr(int level, unsigned *frame) -{ - register char vec; - struct clockframe clkframe; - iackaddr = ivec[level]; - - /* generate IACK and get the vector */ - asm volatile("ld.b %0,%1" : "=r" (vec) : "" (iackaddr)); - switch (vec){ - case TIMER1IRQ: - break; - case TIMER2IRQ: - /* - * build clockframe and pass to the clock - * interrupt handler - */ - clkframe.pc = frame[EF_SXIP] & ~3; - clkframe.sr = frame[EF_EPSR]; - clkframe.ipl = frame[EF_MASK]; - clockintr(&clkframe); - break; - } -} - -static void -level7_intr(int level, unsigned *frame) -{ - iackaddr = ivec[level]; -} - -/* - * Device interrupt handler - * - * when we enter, interrupts are disabled; - * when we leave, they should be disabled, - * but they need not be enabled throughout - * the routine. - */ - -void -ext_int(unsigned vec, unsigned *eframe) -{ - register unsigned char mask, level; - register int s; /* XXX */ - - asm volatile ("ld.b %0,%1" : "=r" (mask) : "" (int_mask_level)); - asm volatile ("ld.b %0,%1" : "=r" (level) : "" (int_pri_level)); - - /* get the mask and stash it away in the trap frame */ - eframe[EF_MASK] = mask; - /* and block ints level or lower */ - spln((char)mask); - enable_interrupt(); - (*int_handler[level])(level,eframe); - /* - * process any remaining data access exceptions before - * returning to assembler - */ - disable_interrupt(); - if (eframe[EF_DMT0] && DMT_VALID) - { - trap(T_DATAFLT, eframe); - data_access_emulation(eframe); - } - mask = eframe[EF_MASK]; - asm volatile ("st.b %0,%1" : "=r" (mask) : "" (int_mask_level)); -} - -/* - * check a word wide address. - * write < 0 -> check for write access. - * otherwise read. - */ -int wprobe(void *addr, unsigned int write) -{ - /* XXX only checking reads */ - return badaddr((vm_offset_t)addr, sizeof(int)); -} - -cpu_exec_aout_makecmds(p, epp) - struct proc *p; - struct exec_package *epp; -{ - int error = ENOEXEC; - -#ifdef COMPAT_SUNOS - extern sun_exec_aout_makecmds __P((struct proc *, struct exec_package *)); - if ((error = sun_exec_aout_makecmds(p, epp)) == 0) - return 0; -#endif - return error; -} - -#if NOTYET -/* - * nvram_read(BUF, ADDRESS, SIZE) - * nvram_write(BUF, ADDRESS, SIZE) - * - * Read and write non-volatile RAM. - * Only one byte from each word in the NVRAM area is accessable. - * ADDRESS points to the virtual starting address, which is some address - * after the nvram start (NVRAM_ADDR). SIZE refers to virtual size. - */ -void nvram_read(char *buf, vm_offset_t address, unsigned size) -{ - unsigned index = (unsigned)address - NVRAM_ADDR; - unsigned char *source = (char*)(NVRAM_ADDR + index * 4); - - while (size-- > 0) - { - *buf++ = *source; - source += 4; /* bump up to point to next readable byte */ - } -} - -void nvram_write(char *buf, vm_offset_t address, unsigned size) -{ - unsigned index = (unsigned)address - NVRAM_ADDR; - unsigned char *source = (char*)(NVRAM_ADDR + index * 4); - - while (size-- > 0) - { - *source = *buf++; - source += 4; /* bump up to point to next readable byte */ - } -} -#endif /* NOTYET */ - -struct sysarch_args { - int op; - char *parms; -}; - -sysarch(p, uap, retval) - struct proc *p; - register struct sysarch_args *uap; - int *retval; -{ - int error = 0; - - switch(uap->op) { - default: - error = EINVAL; - break; - } - return(error); -} - -/* - * machine dependent system variables. - */ -cpu_sysctl(name, namelen, oldp, oldlenp, newp, newlen, p) - int *name; - u_int namelen; - void *oldp; - size_t *oldlenp; - void *newp; - size_t newlen; - struct proc *p; -{ - - /* all sysctl names are this level are terminal */ - if (namelen != 1) - return (ENOTDIR); /* overloaded */ - - switch (name[0]) { - default: - return (EOPNOTSUPP); - } - /*NOTREACHED*/ -} - -/* - * insert an element into a queue - */ -#undef _insque -_insque(element, head) - register struct prochd *element, *head; -{ - element->ph_link = head->ph_link; - head->ph_link = (struct proc *)element; - element->ph_rlink = (struct proc *)head; - ((struct prochd *)(element->ph_link))->ph_rlink=(struct proc *)element; -} - -/* - * remove an element from a queue - */ -#undef _remque -_remque(element) - register struct prochd *element; -{ - ((struct prochd *)(element->ph_link))->ph_rlink = element->ph_rlink; - ((struct prochd *)(element->ph_rlink))->ph_link = element->ph_link; - element->ph_rlink = (struct proc *)0; -} - -#if 0 -/* - * Below written in C to allow access to debugging code - */ -copyinstr(fromaddr, toaddr, maxlength, lencopied) u_int *lencopied, maxlength; - void *toaddr, *fromaddr; -{ - int c,tally; - - tally = 0; - while (maxlength--) { - c = fubyte(fromaddr++); - if (c == -1) { - if(lencopied) *lencopied = tally; - return(EFAULT); - } - tally++; - *(char *)toaddr++ = (char) c; - if (c == 0){ - if(lencopied) *lencopied = (u_int)tally; - return(0); - } - } - if(lencopied) *lencopied = (u_int)tally; - return(ENAMETOOLONG); -} - -copyoutstr(fromaddr, toaddr, maxlength, lencopied) u_int *lencopied, maxlength; - void *fromaddr, *toaddr; -{ - int c; - int tally; - - tally = 0; - while (maxlength--) { - c = subyte(toaddr++, *(char *)fromaddr); - if (c == -1) return(EFAULT); - tally++; - if (*(char *)fromaddr++ == 0){ - if(lencopied) *lencopied = tally; - return(0); - } - } - if(lencopied) *lencopied = tally; - return(ENAMETOOLONG); -} - -#endif /* 0 */ - -copystr(fromaddr, toaddr, maxlength, lencopied) - u_int *lencopied, maxlength; - void *fromaddr, *toaddr; -{ - u_int tally; - - tally = 0; - while (maxlength--) { - *(u_char *)toaddr = *(u_char *)fromaddr++; - tally++; - if (*(u_char *)toaddr++ == 0) { - if(lencopied) *lencopied = tally; - return(0); - } - } - if(lencopied) *lencopied = tally; - return(ENAMETOOLONG); -} - -void -putchar(char c) -{ - bugoutchr(c); -} -/* dummys for now */ - -bugsyscall() -{ -} - -mmrw() -{ -} - -netintr() -{ -} - -MY_info(f, p, flags, s) -struct trapframe *f; -caddr_t p; -int flags; -char *s; -{ - regdump(f); - printf("proc %x flags %x type %s\n", p, flags, s); -} - -MY_info_done(f, flags) -struct trapframe *f; -int flags; -{ - regdump(f); -} - -regdump(struct trapframe *f) -{ -#define R(i) f->r[i] - printf("R00-05: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", - R(0),R(1),R(2),R(3),R(4),R(5)); - printf("R06-11: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", - R(6),R(7),R(8),R(9),R(10),R(11)); - printf("R12-17: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", - R(12),R(13),R(14),R(15),R(16),R(17)); - printf("R18-23: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", - R(18),R(19),R(20),R(21),R(22),R(23)); - printf("R24-29: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n", - R(24),R(25),R(26),R(27),R(28),R(29)); - printf("R30-31: 0x%08x 0x%08x\n",R(30),R(31)); - printf("sxip %x snip %x sfip %x\n", f->sxip, f->snip, f->sfip); - if (f->vector == 0x3) { /* print dmt stuff for data access fault */ - printf("dmt0 %x dmd0 %x dma0 %x\n", f->dmt0, f->dmd0, f->dma0); - printf("dmt1 %x dmd1 %x dma1 %x\n", f->dmt1, f->dmd1, f->dma1); - printf("dmt2 %x dmd2 %x dma2 %x\n", f->dmt2, f->dmd2, f->dma2); - } - if (longformat) { - printf("fpsr %x", f->fpsr); - printf("fpcr %x", f->fpcr); - printf("epsr %x", f->epsr); - printf("ssbr %x\n", f->ssbr); - printf("dmt0 %x", f->dmt0); - printf("dmd0 %x", f->dmd0); - printf("dma0 %x", f->dma0); - printf("dmt1 %x", f->dmt1); - printf("dmd1 %x", f->dmd1); - printf("dma1 %x", f->dma1); - printf("dmt2 %x", f->dmt2); - printf("dmd2 %x", f->dmd2); - printf("dma2 %x\n", f->dma2); - printf("fpecr %x", f->fpecr); - printf("fphs1 %x", f->fphs1); - printf("fpls1 %x", f->fpls1); - printf("fphs2 %x", f->fphs2); - printf("fpls2 %x", f->fpls2); - printf("fppt %x", f->fppt); - printf("fprh %x", f->fprh); - printf("fprl %x", f->fprl); - printf("fpit %x\n", f->fpit); - printf("vector %x", f->vector); - printf("mask %x", f->mask); - printf("mode %x", f->mode); - printf("scratch1 %x", f->scratch1); - printf("pad %x\n", f->pad); - } -} - -#if DDB -inline int -db_splhigh(void) -{ - return (db_spln(6)); -} - -inline int -db_splx(int s) -{ - return (db_spln(s)); -} -#endif /* DDB */ diff --git a/sys/arch/mvme88k/mvme88k/misc.s b/sys/arch/mvme88k/mvme88k/misc.s deleted file mode 100644 index dea8fab94e5..00000000000 --- a/sys/arch/mvme88k/mvme88k/misc.s +++ /dev/null @@ -1,67 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1992 Carnegie Mellon University - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR - * ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie Mellon - * the rights to redistribute these changes. - */ -/* - * - * HISTORY - * $Log: misc.s,v $ - * Revision 1.1 1995/10/18 12:32:29 deraadt - * moved from m88k directory - * - * Revision 1.1.1.1 1995/10/18 10:54:27 deraadt - * initial 88k import; code by nivas and based on mach luna88k - * - * Revision 2.3 93/01/26 18:01:25 danner - * Conditionalied "#define ASSEMBLER". - * [93/01/25 jfriedl] - * - * Revision 2.2 92/08/03 17:52:14 jfriedl - * created [danner] - * - */ - -#ifndef ASSEMBLER - #define ASSEMBLER -#endif - -#include <m88k/asm.h> - -LABEL(_ff1) - jmp.n r1 - ff1 r2, r2 - -/* - * invalidate_pte(pte) - * - * This function will invalidate specified pte indivisibly - * to avoid the write-back of used-bit and/or modify-bit into - * that pte. It also returns the pte found in the table. - */ -LABEL(_invalidate_pte) - or r3,r0,r0 - xmem r3,r2,0 - tb1 0,r0,0 - jmp.n r1 - or r2,r3,r0 diff --git a/sys/arch/mvme88k/mvme88k/pmap.c b/sys/arch/mvme88k/mvme88k/pmap.c deleted file mode 100644 index adfdc4c5099..00000000000 --- a/sys/arch/mvme88k/mvme88k/pmap.c +++ /dev/null @@ -1,5538 +0,0 @@ -/* - * HISTORY - */ - -/* don't want to make them general yet. */ -#ifdef luna88k -# define OMRON_PMAP -#endif -# define OMRON_PMAP - -#include <sys/types.h> -#include <machine/board.h> -#include <vm/pmap.h> -#include <machine/m882xx.h>/* CMMU stuff */ -#include <vm/vm_kern.h> /* vm/vm_kern.h */ -#include <assym.s> - -/*#ifdef luna88k*/ -# define splblock splhigh -/*#endif */ - -#include <sys/param.h> -#include <sys/time.h> -#include <sys/proc.h> -#include <sys/malloc.h> -#include <sys/msgbuf.h> -#include <machine/assert.h> - - - /* - * VM externals - */ -extern vm_offset_t avail_start, avail_next, avail_end; -extern vm_offset_t virtual_avail, virtual_end; - -#if 0 -/* - * Machine configuration stuff - */ -pmap_table_t pmap_table_build(); -#endif /* 0 */ - -/* - * Static variables, functions and variables for debugging - */ -#ifdef DEBUG -#define static - -boolean_t code_cache_enable = TRUE; -boolean_t data_cache_enable = TRUE; -boolean_t kernel_text_ro = FALSE; /* If TRUE kernel text set READ ONLY */ - -/* - * conditional debugging - */ - -#define CD_NORM 0x01 -#define CD_FULL 0x02 - -#define CD_ACTIVATE 0x0000004 /* _pmap_activate */ -#define CD_KMAP 0x0000008 /* pmap_expand_kmap */ -#define CD_MAP 0x0000010 /* pmap_map */ -#define CD_MAPB 0x0000020 /* pmap_map_batc */ -#define CD_CACHE 0x0000040 /* pmap_cache_ctrl */ -#define CD_BOOT 0x0000080 /* pmap_bootstrap */ -#define CD_INIT 0x0000100 /* pmap_init */ -#define CD_CREAT 0x0000200 /* pmap_create */ -#define CD_FREE 0x0000400 /* pmap_free_tables */ -#define CD_DESTR 0x0000800 /* pmap_destroy */ -#define CD_RM 0x0001000 /* pmap_remove */ -#define CD_RMAL 0x0002000 /* pmap_remove_all */ -#define CD_COW 0x0004000 /* pmap_copy_on_write */ -#define CD_PROT 0x0008000 /* pmap_protect */ -#define CD_EXP 0x0010000 /* pmap_expand */ -#define CD_ENT 0x0020000 /* pmap_enter */ -#define CD_UPD 0x0040000 /* pmap_update */ -#define CD_COL 0x0080000 /* pmap_collect */ -#define CD_CMOD 0x0100000 /* pmap_clear_modify */ -#define CD_IMOD 0x0200000 /* pmap_is_modified */ -#define CD_CREF 0x0400000 /* pmap_clear_reference */ -#define CD_PGMV 0x0800000 /* pagemove */ -#define CD_CHKPV 0x1000000 /* check_pv_list */ -#define CD_CHKPM 0x2000000 /* check_pmap_consistency */ -#define CD_CHKM 0x4000000 /* check_map */ -#define CD_ALL 0x0FFFFFC - -int pmap_con_dbg = CD_FULL|CD_NORM; - -#endif /* DBG */ - -int cmmumap = 0; -int mapallio = 1; -int mapextra = 1; -int mydebug = 0; -extern proc0paddr; - -/* - * All those kernel PT submaps that BSD is so fond of - */ -caddr_t CADDR1, CADDR2, vmmap; -u_int *CMAP1, *CMAP2, *vmpte, *msgbufmap; - -/* - * PHYS_TO_VM_PAGE and vm_page_set_modified, called by pmap_remove_range - * and pmap_remove_all, are still stubbed out. - * - * VM-routines would keep truck of the page status through calling - * pmap_is_modified. - */ - -#ifndef PHYS_TO_VM_PAGE -#define PHYS_TO_VM_PAGE(pa) -#endif - -#ifndef vm_page_set_modified -#define vm_page_set_modified(m) -#endif - -static struct pmap kernel_pmap_store; -pmap_t kernel_pmap = &kernel_pmap_store; - -typedef struct kpdt_entry *kpdt_entry_t; -struct kpdt_entry { - kpdt_entry_t next; - vm_offset_t phys; -}; -#define KPDT_ENTRY_NULL ((kpdt_entry_t)0) - -static kpdt_entry_t kpdt_free; - -/* - * MAX_KERNEL_VA_SIZE must be fit into the virtual address space between - * VM_MIN_KERNEL_ADDRESS and VM_MAX_KERNEL_ADDRESS. - */ -#define MAX_KERNEL_VA_SIZE (256*1024*1024) - - -/* - * Size of kernel page tables, which is enough to map MAX_KERNEL_VA_SIZE - */ -#define MAX_KERNEL_PDT_SIZE (M88K_BTOP(MAX_KERNEL_VA_SIZE) * sizeof(pt_entry_t)) - - -/* - * Two pages of scratch space. - * Used in copy_to_phys(), pmap_copy_page() and pmap_zero_page(). - */ -vm_offset_t phys_map_vaddr1, phys_map_vaddr2; - -int ptes_per_vm_page; /* number of M88K ptes required to map one VM page */ - - -#define PMAP_MAX 512 - -/* - * The Modify List - * - * This is an array, one byte per physical page, which keeps track - * of modified flags for pages which are no longer containd in any - * pmap. (for mapped pages, the modified flags are in the PTE.) - */ -char *pmap_modify_list; - - -/* The PV (Physical to virtual) List. - * - * For each vm_page_t, pmap keeps a list of all currently valid virtual - * mappings of that page. An entry is a pv_entry_t; the list is the pv_table. - * This is used by things like pmap_remove, when we must find and remove all - * mappings for a particular physical page. - */ -typedef struct pv_entry { - struct pv_entry *next; /* next pv_entry */ - pmap_t pmap; /* pmap where mapping lies */ - vm_offset_t va; /* virtual address for mapping */ -} *pv_entry_t; - -#define PV_ENTRY_NULL ((pv_entry_t) 0) - -static pv_entry_t pv_head_table; /* array of entries, one per page */ - -/* - * Index into pv_head table, its lock bits, and the modify bits - * starting at pmap_phys_start. - */ -#define PFIDX(pa) (atop(pa - pmap_phys_start)) -#define PFIDX_TO_PVH(pfidx) (&pv_head_table[pfidx]) - - -/* - * Locking and TLB invalidation primitives - */ - -/* - * Locking Protocols: - * - * There are two structures in the pmap module that need locking: - * the pmaps themselves, and the per-page pv_lists (which are locked - * by locking the pv_lock_table entry that corresponds to the pv_head - * for the list in question.) Most routines want to lock a pmap and - * then do operations in it that require pv_list locking -- however - * pmap_remove_all and pmap_copy_on_write operate on a physical page - * basis and want to do the locking in the reverse order, i.e. lock - * a pv_list and then go through all the pmaps referenced by that list. - * To protect against deadlock between these two cases, the pmap_lock - * is used. There are three different locking protocols as a result: - * - * 1. pmap operations only (pmap_extract, pmap_access, ...) Lock only - * the pmap. - * - * 2. pmap-based operations (pmap_enter, pmap_remove, ...) Get a read - * lock on the pmap_lock (shared read), then lock the pmap - * and finally the pv_lists as needed [i.e. pmap lock before - * pv_list lock.] - * - * 3. pv_list-based operations (pmap_remove_all, pmap_copy_on_write, ...) - * Get a write lock on the pmap_lock (exclusive write); this - * also guaranteees exclusive access to the pv_lists. Lock the - * pmaps as needed. - * - * At no time may any routine hold more than one pmap lock or more than - * one pv_list lock. Because interrupt level routines can allocate - * mbufs and cause pmap_enter's, the pmap_lock and the lock on the - * kernel_pmap can only be held at splvm. - */ -/* DCR: 12/18/91 - The above explanation is no longer true. The pmap - * system lock has been removed in favor of a backoff strategy to - * avoid deadlock. Now, pv_list-based operations first get the - * pv_list lock, then try to get the pmap lock, but if they can't, - * they release the pv_list lock and retry the whole operation. - */ - -#define SPLVM(spl) { spl = splvm(); } -#define SPLX(spl) { splx(spl); } - -#define PMAP_LOCK(pmap, spl) SPLVM(spl) -#define PMAP_UNLOCK(pmap, spl) SPLX(spl) - -#define PV_LOCK_TABLE_SIZE(n) 0 -#define LOCK_PVH(index) -#define UNLOCK_PVH(index) - -/* - * First and last physical address that we maintain any information - * for. Initalized to zero so that pmap operations done before - * pmap_init won't touch any non-existent structures. - */ - -static vm_offset_t pmap_phys_start = (vm_offset_t) 0; -static vm_offset_t pmap_phys_end = (vm_offset_t) 0; - -#define PMAP_MANAGED(pa) ((pa) >= pmap_phys_start && (pa) < pmap_phys_end) - -/* - * This variable extract vax's pmap.c. - * pmap_verify_free refer to this. - * pmap_init initialize this. - * '90.7.17 Fuzzy - */ -boolean_t pmap_initialized = FALSE;/* Has pmap_init completed? */ - -/* - * Consistency checks. - * These checks are disabled by default; enabled by setting CD_FULL - * in pmap_con_dbg. - */ -#ifdef DEBUG -#define CHECK_PV_LIST(phys,pv_h,who) \ - if (pmap_con_dbg & CD_CHKPV) check_pv_list(phys,pv_h,who) -#define CHECK_PMAP_CONSISTENCY(who) \ - if (pmap_con_dbg & CD_CHKPM) check_pmap_consistency(who) -#else -#define CHECK_PV_LIST(phys,pv_h,who) -#define CHECK_PMAP_CONSISTENCY(who) -#endif /* DEBUG */ - -/* - * number of BATC entries used - */ -int batc_used; - -/* - * keep track BATC mapping - */ -batc_entry_t batc_entry[BATC_MAX]; - -int maxcmmu_pb = 4; /* max number of CMMUs per processors pbus */ -int n_cmmus_pb = 1; /* number of CMMUs per processors pbus */ - -#define cpu_number() 0 /* just being lazy, should be taken out -nivas*/ - -vm_offset_t kmapva = 0; - -static void flush_atc_entry(unsigned users, vm_offset_t va, int kernel) -{ - /* always flush cpu 0 TLB till we understand if this - is required XXX -nivas */ -/* if (users) */ - cmmu_flush_remote_tlb(cpu_number(), kernel, va, M88K_PGBYTES); -} - -/* - * Routine: _PMAP_ACTIVATE - * - * Author: N. Sugai - * - * Function: - * Binds the given physical map to the given processor. - * - * Parameters: - * pmap pointer to pmap structure - * p pointer to proc structure - * cpu CPU number - * - * If the specified pmap is not kernel_pmap, this routine makes arp - * template and stores it into UAPR (user area pointer register) in the - * CMMUs connected to the specified CPU. - * - * If kernel_pmap is specified, only flushes the TLBs mapping kernel - * virtual space, in the CMMUs connected to the specified CPU. - * - * NOTE: - * All of the code of this function extracted from macro PMAP_ACTIVATE - * to make debugging easy. Accordingly, PMAP_ACTIVATE simlpy call - * _pmap_activate. - * - */ -void -_pmap_activate( - register pmap_t pmap, - register pcb_t pcb, - register int my_cpu) -{ - register apr_template_t apr_data; - register int n; - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_ACTIVATE | CD_FULL)) == (CD_ACTIVATE | CD_NORM)) - printf("(_pmap_activate :%x) pmap 0x%x\n", curproc, (unsigned)pmap); -#endif - - if (pmap != kernel_pmap) { - /* - * Lock the pmap to put this cpu in its active set. - */ - simple_lock(&pmap->lock); - - apr_data.bits = 0; - apr_data.field.st_base = M88K_BTOP(pmap->sdt_paddr); - apr_data.field.wt = 0; - apr_data.field.g = 1; - apr_data.field.ci = 0; - apr_data.field.te = 1; -#ifdef OMRON_PMAP - /* - * cmmu_pmap_activate will set the uapr and the batc entries, then - * flush the *USER* TLB. IF THE KERNEL WILL EVER CARE ABOUT THE - * BATC ENTRIES, THE SUPERVISOR TLBs SHOULB BE FLUSHED AS WELL. - */ - cmmu_pmap_activate(my_cpu, apr_data.bits, pmap->i_batc, pmap->d_batc); - for (n = 0; n < BATC_MAX; n++) - *(unsigned*)&batc_entry[n] = pmap->i_batc[n].bits; -#else - cmmu_set_uapr(apr_data.bits); - cmmu_flush_tlb(0, 0, -1); -#endif - - /* - * Mark that this cpu is using the pmap. - */ - simple_unlock(&pmap->lock); - - } else { - - /* - * kernel_pmap must be always active. - */ - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_ACTIVATE | CD_NORM)) == (CD_ACTIVATE | CD_NORM)) - printf("(_pmap_activate :%x) called for kernel_pmap\n", curproc); -#endif - - } -} /* _pmap_activate */ - -/* - * Routine: _PMAP_DEACTIVATE - * - * Author: N. Sugai - * - * Function: - * Unbinds the given physical map to the given processor. - * - * Parameters: - * pmap pointer to pmap structure - * th pointer to thread structure - * cpu CPU number - * - * _pmap_deactive simply clears the cpus_using field in given pmap structure. - * - * NOTE: - * All of the code of this function extracted from macro PMAP_DEACTIVATE - * to make debugging easy. Accordingly, PMAP_DEACTIVATE simlpy call - * _pmap_deactivate. - * - */ -void -_pmap_deactivate( - register pmap_t pmap, - register pcb_t pcb, - register int my_cpu) -{ - if (pmap != kernel_pmap) { - /* Nothing to do */ - } -} - -/* - * Author: Joe Uemura - * Convert machine-independent protection code to M88K protection bits. - * - * History: - * '90.8.3 Fuzzy - * if defined TEST, 'static' undeclared. - * '90.8.30 Fuzzy - * delete "if defined TEST, 'static' undeclared." - * - */ - -static int unsigned m88k_protection( - pmap_t map, - vm_prot_t prot) -{ - register pte_template_t p; - - p.bits = 0; - p.pte.prot = (prot & VM_PROT_WRITE) ? 0 : 1; - - return(p.bits); - -} /* m88k_protection */ - - -/* - * Routine: PMAP_PTE - * - * Author: Joe Uemura - * - * Function: - * Given a map and a virtual address, compute a (virtual) pointer - * to the page table entry (PTE) which maps the address . - * If the page table associated with the address does not - * exist, PT_ENTRY_NULL is returned (and the map may need to grow). - * - * Parameters: - * pmap pointer to pmap structure - * virt virtual address for which page table entry is desired - * - * Otherwise the page table address is extracted from the segment table, - * the page table index is added, and the result is returned. - * - * Calls: - * SDTENT - * SDT_VALID - * PDT_IDX - * - * History: - * 90/9/12 Fuzzy if pmap == PMAP_NULL, panic - */ -pt_entry_t * pmap_pte( - pmap_t map, - vm_offset_t virt) -{ - sdt_entry_t *sdt; - - if (map == PMAP_NULL) - panic("pmap_pte: pmap is NULL"); - - sdt = SDTENT(map,virt); - - /* - * Check whether page table is exist or not. - */ - if (!SDT_VALID(sdt)) - return(PT_ENTRY_NULL); - else - return((pt_entry_t *)(((sdt + SDT_ENTRIES)->table_addr)<<PDT_SHIFT) + PDTIDX(virt)); - -} /* pmap_pte */ - - -/* - * Routine: PMAP_EXPAND_KMAP (internal) - * - * History: - * '90.8.3 Fuzzy - * if defined TEST, 'static' undeclared. - * '90.8.27 Fuzzy - * allocated pte entry clear - * '90.8.28 Fuzzy - * Bug: No free kernel page table process - * panic("pmap_expand_kmap:..."); - * --> #ifdef DBG - * printf("Warnning: Ran out of page table entry VALID\n"); - * #endif - * '90.8.30 Fuzzy - * delete "if defined TEST, 'static' undeclared." - * - * Author: Fuzzy - * - * Function: - * Allocate a page descriptor table (pte_table) and validate associated - * segment table entry, returning pointer to page table entry. This is - * much like 'pmap_expand', except that table space is acquired - * from an area set up by pmap_bootstrap, instead of through - * kmem_alloc. (Obviously, because kmem_alloc uses the kernel map - * for allocation - which we can't do when trying to expand the - * kernel map!) Note that segment tables for the kernel map were - * all allocated at pmap_bootstrap time, so we only need to worry - * about the page table here. - * - * Parameters: - * virt VA for which translation tables are needed - * prot protection attributes for segment entries - * - * Extern/Global: - * kpdt_free kernel page table free queue - * - * Calls: - * m88k_protection - * SDTENT - * SDT_VALID - * PDT_IDX - * - * This routine simply dequeues a table from the kpdt_free list, - * initalizes all its entries (invalidates them), and sets the - * corresponding segment table entry to point to it. If the kpdt_free - * list is empty - we panic (no other places to get memory, sorry). (Such - * a panic indicates that pmap_bootstrap is not allocating enough table - * space for the kernel virtual address space). - * - */ - -static pt_entry_t * pmap_expand_kmap( - vm_offset_t virt, - vm_prot_t prot) -{ - int aprot; - sdt_entry_t *sdt; - kpdt_entry_t kpdt_ent; - pmap_t map = kernel_pmap; - -#if DEBUG - if ((pmap_con_dbg & (CD_KMAP | CD_FULL)) == (CD_KMAP | CD_FULL)) - printf("(pmap_expand_kmap :%x) v %x\n", curproc,virt); -#endif - - aprot = m88k_protection (map, prot); - - /* segment table entry derivate from map and virt. */ - sdt = SDTENT(map, virt); - if (SDT_VALID(sdt)) - panic("pmap_expand_kmap: segment table entry VALID"); - - kpdt_ent = kpdt_free; - if (kpdt_ent == KPDT_ENTRY_NULL) { - printf("pmap_expand_kmap: Ran out of kernel pte tables\n"); - return(PT_ENTRY_NULL); - } - kpdt_free = kpdt_free->next; - - ((sdt_entry_template_t *)sdt)->bits = kpdt_ent->phys | aprot | DT_VALID; - ((sdt_entry_template_t *)(sdt + SDT_ENTRIES))->bits = (vm_offset_t)kpdt_ent | aprot | DT_VALID; - (unsigned)(kpdt_ent->phys) = 0; - (unsigned)(kpdt_ent->next) = 0; - - return((pt_entry_t *)(kpdt_ent) + PDTIDX(virt)); -}/* pmap_expand_kmap() */ - -/* - * Routine: PMAP_MAP - * - * Function: - * Map memory at initalization. The physical addresses being - * mapped are not managed and are never unmapped. - * - * Parameters: - * virt virtual address of range to map (IN) - * start physical address of range to map (IN) - * end physical address of end of range (IN) - * prot protection attributes (IN) - * - * Calls: - * pmap_pte - * pmap_expand_kmap - * - * Special Assumptions - * For now, VM is already on, only need to map the specified - * memory. Used only by pmap_bootstrap() and vm_page_startup(). - * - * For each page that needs mapping: - * pmap_pte is called to obtain the address of the page table - * table entry (PTE). If the page table does not exist, - * pmap_expand_kmap is called to allocate it. Finally, the page table - * entry is set to point to the physical page. - * - * - * initialize template with paddr, prot, dt - * look for number of phys pages in range - * { - * pmap_pte(virt) - expand if necessary - * stuff pte from template - * increment virt one page - * increment template paddr one page - * } - * - * - * History: - * 90/09/12 Fuzzy calculation of allocating page table entry number - * 90/09/12 Fuzzy When mapped VA map again, output warinning message. - * - */ -vm_offset_t pmap_map( - register vm_offset_t virt, - register vm_offset_t start, - register vm_offset_t end, - register vm_prot_t prot -#ifdef OMRON_PMAP - , register unsigned cmode -#endif /* OMRON */ - ) -{ - int aprot; - unsigned npages; - unsigned num_phys_pages; - pt_entry_t *pte; - pte_template_t template; - -#if DEBUG - if ((pmap_con_dbg & (CD_MAP | CD_FULL)) == (CD_MAP | CD_FULL)) - printf ("(pmap_map :%x) phys address from %x to %x mapped at virtual %x, prot %x\n", - curproc, start, end, virt, prot); -#endif - - if (start > end) - panic("pmap_map: start greater than end address"); - - aprot = m88k_protection (kernel_pmap, prot); - -#ifdef OMRON_PMAP - template.bits = M88K_TRUNC_PAGE(start) | aprot | DT_VALID | cmode; -#else /* OMRON */ - template.bits = M88K_TRUNC_PAGE(start) | aprot | DT_VALID; -#endif /* OMRON */ - - npages = M88K_BTOP(M88K_ROUND_PAGE(end) - M88K_TRUNC_PAGE(start)); - - for (num_phys_pages = npages; num_phys_pages > 0; num_phys_pages--) { - - if ((pte = pmap_pte(kernel_pmap, virt)) == PT_ENTRY_NULL) - if ((pte = pmap_expand_kmap(virt, VM_PROT_READ|VM_PROT_WRITE)) == PT_ENTRY_NULL) - panic ("pmap_map: Cannot allocate pte table"); - -#ifdef DEBUG - if (pmap_con_dbg & CD_MAP) - if (pte->dtype) - printf("(pmap_map :%x) pte @ 0x%x already valid\n", curproc, (unsigned)pte); -#endif - - *pte = template.pte; - virt += M88K_PGBYTES; - template.bits += M88K_PGBYTES; - } - - return(virt); - -} /* pmap_map() */ - -/* - * Routine: PMAP_MAP_BATC - * - * Function: - * Map memory using BATC at initalization. The physical addresses being - * mapped are not managed and are never unmapped. - * - * Parameters: - * virt virtual address of range to map (IN) - * start physical address of range to map (IN) - * end physical address of end of range (IN) - * prot protection attributes (IN) - * cmode cache control attributes (IN) - * - * External & Global: - * batc_used number of BATC used (IN/OUT) - * - * Calls: - * m88k_protection - * BATC_BLK_ALIGNED - * cmmu_store - * pmap_pte - * pmap_expand_kmap - * - * - * For each page that needs mapping: - * If both virt and phys are on the BATC block boundary, map using BATC. - * Else make mapping in the same manner as pmap_map. - * - * initialize BATC and pte template - * look for number of phys pages in range - * { - * if virt and phys are on BATC block boundary - * { - * map using BATC - * increment virt and phys one BATC block - * continue outer loop - * } - * pmap_pte(virt) - expand if necessary - * stuff pte from template - * increment virt one page - * increment template paddr one page - * } - * - * Author: Sugai - * Oct 25 '90 Initial virsion - * - */ -vm_offset_t -pmap_map_batc ( - register vm_offset_t virt, - register vm_offset_t start, - register vm_offset_t end, - register vm_prot_t prot, - register unsigned cmode) -{ - int aprot; - unsigned num_phys_pages; - vm_offset_t phys; - pt_entry_t *pte; - pte_template_t template; - batc_template_t batctmp; - register int i; - -#if DEBUG - if ((pmap_con_dbg & (CD_MAPB | CD_FULL)) == (CD_MAPB | CD_FULL)) - printf ("(pmap_map_batc :%x) phys address from %x to %x mapped at virtual %x, prot %x\n", curproc, - start, end, virt, prot); -#endif - - if (start > end) - panic("pmap_map_batc: start greater than end address"); - - aprot = m88k_protection (kernel_pmap, prot); - template.bits = M88K_TRUNC_PAGE(start) | aprot | DT_VALID | cmode; - phys = start; - batctmp.bits = 0; - batctmp.field.sup = 1; /* supervisor */ - batctmp.field.wt = template.pte.wt; /* write through */ - batctmp.field.g = template.pte.g; /* global */ - batctmp.field.ci = template.pte.ci; /* cache inhibit */ - batctmp.field.wp = template.pte.prot; /* protection */ - batctmp.field.v = 1; /* valid */ - - num_phys_pages = M88K_BTOP(M88K_ROUND_PAGE(end) - M88K_TRUNC_PAGE(start)); - - while (num_phys_pages > 0) { - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_MAPB | CD_FULL)) == (CD_MAPB | CD_FULL)) - printf("(pmap_map_batc :%x) num_phys_pg=%x, virt=%x, aligne V=%d, phys=%x, aligne P=%d\n", curproc, - num_phys_pages, virt, BATC_BLK_ALIGNED(virt), phys, BATC_BLK_ALIGNED(phys)); -#endif - - if ( BATC_BLK_ALIGNED(virt) && BATC_BLK_ALIGNED(phys) && - num_phys_pages >= BATC_BLKBYTES/M88K_PGBYTES && - batc_used < BATC_MAX ) { - - /* - * map by BATC - */ - batctmp.field.lba = M88K_BTOBLK(virt); - batctmp.field.pba = M88K_BTOBLK(phys); - - cmmu_set_pair_batc_entry(0, batc_used, batctmp.bits); - - batc_entry[batc_used] = batctmp.field; - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_MAPB | CD_NORM)) == (CD_MAPB | CD_NORM)) { - printf("(pmap_map_batc :%x) BATC used=%d, data=%x\n", curproc, batc_used, batctmp.bits); - } - if (pmap_con_dbg & CD_MAPB) { - - for (i = 0; i < BATC_BLKBYTES; i += M88K_PGBYTES ) { - pte = pmap_pte(kernel_pmap, virt+i); - if (pte->dtype) - printf("(pmap_map_batc :%x) va %x is already mapped : pte %x\n", curproc, virt+i, ((pte_template_t *)pte)->bits); - } - } -#endif - batc_used++; - virt += BATC_BLKBYTES; - phys += BATC_BLKBYTES; - template.pte.pfn = M88K_BTOP(phys); - num_phys_pages -= BATC_BLKBYTES/M88K_PGBYTES; - continue; - } - if ((pte = pmap_pte(kernel_pmap, virt)) == PT_ENTRY_NULL) - if ((pte = pmap_expand_kmap(virt, VM_PROT_READ|VM_PROT_WRITE)) == PT_ENTRY_NULL) - panic ("pmap_map_batc: Cannot allocate pte table"); - -#ifdef DEBUG - if (pmap_con_dbg & CD_MAPB) - if (pte->dtype) - printf("(pmap_map_batc :%x) pte @ 0x%x already valid\n", curproc, (unsigned)pte); -#endif - - *pte = template.pte; - virt += M88K_PGBYTES; - phys += M88K_PGBYTES; - template.bits += M88K_PGBYTES; - num_phys_pages--; - } - - return(M88K_ROUND_PAGE(virt)); - -} /* pmap_map_batc() */ - -/* - * Routine: PMAP_CACHE_CONTROL - * - * Author: Sugai 90/09/07 - * - * Function: - * Set the cache-control bits in the page table entries(PTE) which maps - * the specifid virutal address range. - * - * mode - * writethrough 0x200 - * global 0x80 - * cache inhibit 0x40 - * - * Parameters: - * pmap_t map - * vm_offset_t s - * vm_offset_t e - * unsigned mode - * - * Calls: - * PMAP_LOCK - * PMAP_UNLOCK - * pmap_pte - * invalidate_pte - * flush_atc_entry - * dcachefall - * - * This routine sequences through the pages of the specified range. - * For each, it calls pmap_pte to acquire a pointer to the page table - * entry (PTE). If the PTE is invalid, or non-existant, nothing is done. - * Otherwise, the cache-control bits in the PTE's are adjusted as specified. - * - */ -void pmap_cache_ctrl( - pmap_t pmap, - vm_offset_t s, - vm_offset_t e, - unsigned mode) -{ - int spl, spl_sav; - pt_entry_t *pte; - vm_offset_t va; - int kflush; - int cpu; - register pte_template_t opte; - -#ifdef DEBUG - if ( mode & CACHE_MASK ) { - printf("(cache_ctrl) illegal mode %x\n",mode); - return; - } - if ((pmap_con_dbg & (CD_CACHE | CD_NORM)) == (CD_CACHE | CD_NORM)) { - printf("(pmap_cache_ctrl :%x) pmap %x, va %x, mode %x\n", curproc, pmap, s, mode); - } -#endif /* DEBUG */ - - if ( pmap == PMAP_NULL ) { - panic("pmap_cache_ctrl: pmap is NULL"); - } - - PMAP_LOCK(pmap, spl); - - if (pmap == kernel_pmap) { - kflush = 1; - } else { - kflush = 0; - } - - for (va = s; va < e; va += M88K_PGBYTES) { - if ((pte = pmap_pte(pmap, va)) == PT_ENTRY_NULL) - continue; -#ifdef DEBUG - printf("(cache_ctrl) pte@0x%08x\n",(unsigned)pte); -#endif /* DEBUG */ - - /* - * Invalidate pte temporarily to avoid being written back - * the modified bit and/or the reference bit by other cpu. - * XXX - */ - spl_sav = splblock(); - opte.bits = invalidate_pte(pte); - ((pte_template_t *)pte)->bits = (opte.bits & CACHE_MASK) | mode; - flush_atc_entry(0, va, kflush); - splx(spl_sav); - - /* - * Data cache should be copied back and invalidated. - */ - cmmu_flush_remote_cache(0, M88K_PTOB(pte->pfn), M88K_PGBYTES); - } - - PMAP_UNLOCK(pmap, spl); - -} /* pmap_cache_ctrl */ - - -/* - * Routine: PMAP_BOOTSTRAP - * - * Author: Fuzzy '90.7.12 - * - * 90.7.23. JU - changed blkclr to bzero - * - * - * Function: - * Bootstarp the system enough to run with virtual memory. - * Map the kernel's code and data, allocate the kernel - * translation table space, and map control registers - * and other IO addresses. - * - * Parameters: - * load_start PA where kernel was loaded (IN) - * &phys_start PA of first available physical page (IN/OUT) - * &phys_end PA of last available physical page (IN) - * &virtual_avail VA of first available page (after kernel bss) - * &virtual_end VA of last available page (end of kernel address space) - * - * Extern/Global: - * - * PAGE_SIZE VM (software) page size (IN) - * kernelstart start symbol of kernel text (IN) - * etext end of kernel text (IN) - * phys_map_vaddr1 VA of page mapped arbitrarily for debug/IO (OUT) - * phys_map_vaddr2 VA of page mapped arbitrarily for debug/IO (OUT) - * - * Calls: - * simple_lock_init - * pmap_map - * pmap_map_batc - * - * The physical address 'load_start' is mapped at - * VM_MIN_KERNEL_ADDRESS, which maps the kernel code and data at the - * virtual address for which it was (presumably) linked. Immediately - * following the end of the kernel code/data, sufficent page of - * physical memory are reserved to hold translation tables for the kernel - * address space. The 'phys_start' parameter is adjusted upward to - * reflect this allocation. This space is mapped in virtual memory - * immediately following the kernel code/data map. - * - * A pair of virtual pages are reserved for debugging and IO - * purposes. They are arbitrarily mapped when needed. They are used, - * for example, by pmap_copy_page and pmap_zero_page. - * - * For m88k, we have to map BUG memory also. This is a read only - * mapping for 0x10000 bytes. We will end up having load_start as - * 0 and VM_MIN_KERNEL_ADDRESS as 0 - yes sir, we have one-to-one - * mapping!!! - */ - -void -pmap_bootstrap( - vm_offset_t load_start, /* IN */ - vm_offset_t *phys_start, /* IN/OUT */ - vm_offset_t *phys_end, /* IN */ - vm_offset_t *virt_start, /* OUT */ - vm_offset_t *virt_end) /* OUT */ -{ - kpdt_entry_t kpdt_virt; - sdt_entry_t *kmap; - vm_offset_t vaddr, - virt, - kpdt_phys, - s_text, - e_text, - kernel_pmap_size; - apr_template_t apr_data; - pt_entry_t *pte; - int i; - extern char *kernelstart, *etext; -#if 0 - pmap_table_t ptable; -#endif /* 0 */ - - printf("pmap_bootstrap : \"load_start\" 0x%x\n", load_start); - ptes_per_vm_page = PAGE_SIZE >> M88K_PGSHIFT; - if (ptes_per_vm_page == 0) - panic("pmap_bootstrap: VM page size < MACHINE page size"); - - if ( ! PAGE_ALIGNED(load_start)) { - printf("pmap_bootstrap : \"load_start\" not on the m88k page boundary : 0x%x\n", load_start); - } - - /* - * Allocate the kernel page table from the front of available - * physical memory, - * i.e. just after where the kernel image was loaded. - */ - /* - * The calling sequence is - * ... - * pmap_bootstrap(&kernelstart,...) - * kernelstart is the first symbol in the load image. - * We link the kernel such that &kernelstart == 0x10000 (size of - * BUG ROM) - * The expression (&kernelstart - load_start) will end up as - * 0, making *virt_start == *phys_start, giving a 1-to-1 map) - */ - - *phys_start = M88K_ROUND_PAGE(*phys_start); - *virt_start = *phys_start + ((unsigned)&kernelstart - GOOFYLDOFFSET - load_start); - - /* - * Initialilze kernel_pmap structure - */ - kernel_pmap->ref_count = 1; - kernel_pmap->sdt_paddr = kmap = (sdt_entry_t *)(*phys_start); - kernel_pmap->sdt_vaddr = (sdt_entry_t *)(*virt_start); - kmapva = *virt_start; - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_BOOT | CD_FULL)) == (CD_BOOT | CD_FULL)) { - printf("kernel_pmap->sdt_paddr = %x\n",kernel_pmap->sdt_paddr); - printf("kernel_pmap->sdt_vaddr = %x\n",kernel_pmap->sdt_vaddr); - } - /* init double-linked list of pmap structure */ - kernel_pmap->next = kernel_pmap; - kernel_pmap->prev = kernel_pmap; -#endif - - /* - * Reserve space for segment table entries. - * One for the regular segment table and one for the shadow table - * The shadow table keeps track of the virtual address of page - * tables. This is used in virtual-to-physical address translation - * functions. Remember, MMU cares only for physical addresses of - * segment and page table addresses. For kernel page tables, we - * really don't need this virtual stuff (since the kernel will - * be mapped 1-to-1) but for user page tables, this is required. - * Just to be consistent, we will maintain the shadow table for - * kernel pmap also. - */ - - kernel_pmap_size = 2*SDT_SIZE; - - /* save pointers to where page table entries start in physical memory */ - kpdt_phys = (*phys_start + kernel_pmap_size); - kpdt_virt = (kpdt_entry_t)(*virt_start + kernel_pmap_size); - kernel_pmap_size += MAX_KERNEL_PDT_SIZE; - *phys_start += kernel_pmap_size; - *virt_start += kernel_pmap_size; - - /* init all segment and page descriptor to zero */ - bzero(kernel_pmap->sdt_vaddr, kernel_pmap_size); - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_BOOT | CD_FULL)) == (CD_BOOT | CD_FULL)) { - printf("kpdt_phys = %x\n",kpdt_phys); - printf("kpdt_virt = %x\n",kpdt_virt); - printf("end of kpdt at (virt)0x%08x ; (phys)0x%08x\n", - *virt_start,*phys_start); - } -#endif - /* - * init the kpdt queue - */ - kpdt_free = kpdt_virt; - for (i = MAX_KERNEL_PDT_SIZE/PDT_SIZE; i>0; i--) { - kpdt_virt->next = (kpdt_entry_t)((vm_offset_t)kpdt_virt + PDT_SIZE); - kpdt_virt->phys = kpdt_phys; - kpdt_virt = kpdt_virt->next; - kpdt_phys += PDT_SIZE; - } - kpdt_virt->next = KPDT_ENTRY_NULL; /* terminate the list */ - - /* - * Map the kernel image into virtual space - */ - - s_text = load_start; /* paddr of text */ - e_text = load_start + ((unsigned)&etext - (unsigned)&kernelstart - GOOFYLDOFFSET); /* paddr of end of text section*/ - e_text = M88K_ROUND_PAGE(e_text); - - #ifdef OMRON_PMAP - #define PMAPER pmap_map - #else - #define PMAPER pmap_map_batc - #endif - - /* map the first 64k (BUG ROM) read only, cache inhibited */ - vaddr = PMAPER( - 0, - 0, - 0x10000, - VM_PROT_READ|VM_PROT_WRITE, - CACHE_INH); - - assert(vaddr == (unsigned)&kernelstart - GOOFYLDOFFSET); - - vaddr = PMAPER( - (vm_offset_t)((unsigned)&kernelstart - GOOFYLDOFFSET), - s_text, - e_text, - VM_PROT_WRITE | VM_PROT_READ, /* shouldn't it be RO? XXX*/ - CACHE_INH); - - vaddr = PMAPER( - vaddr, - e_text, - (vm_offset_t)kmap, - VM_PROT_WRITE|VM_PROT_READ, - CACHE_GLOBAL); - - /* - * Map system segment & page tables - should be cache inhibited. - */ - if (kmapva != vaddr) { - printf("(pmap_bootstrap) correcting vaddr\n"); - while (vaddr < (*virt_start - kernel_pmap_size)) - vaddr = M88K_ROUND_PAGE(vaddr + 1); - } - - vaddr = PMAPER( - vaddr, - (vm_offset_t)kmap, - *phys_start, - VM_PROT_WRITE|VM_PROT_READ, - CACHE_INH); - - if (vaddr != *virt_start) { - *virt_start = vaddr; - *phys_start = round_page(*phys_start); - } - - - *virt_start = round_page(*virt_start); - *virt_end = VM_MAX_KERNEL_ADDRESS; - - /* - * Map a few more pages for phys routines and debugger. - */ - - phys_map_vaddr1 = round_page(*virt_start); - phys_map_vaddr2 = phys_map_vaddr1 + PAGE_SIZE; - - /* - * To make 1:1 mapping of virt:phys, throw away a few phys pages - */ - - *phys_start += 2 * PAGE_SIZE; - *virt_start += 2 * PAGE_SIZE; - - /* - * establish mapping for code and data cmmu - */ - - if (cmmumap) { - PMAPER( - CMMU_I, - CMMU_I, - CMMU_I + 0x1000, - VM_PROT_WRITE|VM_PROT_READ, - CACHE_INH); - - PMAPER( - CMMU_D, - CMMU_D, - CMMU_D + 0x1000, - VM_PROT_WRITE|VM_PROT_READ, - CACHE_INH); - } -#if 0 - if (mapextra) { - PMAPER( - 0x01000000, - 0x01000000, - 0x02000000, - VM_PROT_WRITE|VM_PROT_READ, - CACHE_INH); - } -#endif /* 0 */ - if (mapallio) { - PMAPER( - 0xFF800000, - 0xFF800000, - 0xFFFF0000, - VM_PROT_WRITE|VM_PROT_READ, - CACHE_INH); - } - -#if 0 - ptable = pmap_table_build(avail_end); - - for ( ; ptable->size != 0xffffffffU; ptable++) - if (ptable->size) - PMAPER(ptable->virt_start, - ptable->phys_start, - ptable->phys_start + ptable->size, - ptable->prot, - ptable->cacheability); - -#endif /* 0 */ - - /* - * Allocate all the submaps we need - */ -#define SYSMAP(c, p, v, n) \ -({ \ - v = (c)virt; \ - if ((p = pmap_pte(kernel_pmap, virt)) == PT_ENTRY_NULL) \ - pmap_expand_kmap(virt, VM_PROT_READ|VM_PROT_WRITE); \ - virt += ((n)*NBPG); \ -}) - - virt = *virt_start; - - SYSMAP(caddr_t ,CMAP1 ,CADDR1 ,1 ); - SYSMAP(caddr_t ,CMAP2 ,CADDR2 ,1 ); - SYSMAP(caddr_t ,vmpte ,vmmap ,1 ); - SYSMAP(struct msgbuf * ,msgbufmap ,msgbufp ,1 ); - - *virt_start = virt; - /* - * Set translation for UPAGES at UADDR. The idea is we want to - * have translations set up for UADDR. Later on, the ptes for - * for this address will be set so that kstack will refer - * to the u area. Make sure pmap knows about this virtual - * address by doing vm_findspace on kernel_map. - */ - - for (i = 0, virt = UADDR; i < UPAGES; i++, virt += PAGE_SIZE) { -#ifdef DEBUG - if ((pmap_con_dbg & (CD_BOOT | CD_FULL)) == (CD_BOOT | CD_FULL)) { - printf("setting up mapping for Upage %d @ %x\n", i, virt); - } -#endif - if ((pte = pmap_pte(kernel_pmap, virt)) == PT_ENTRY_NULL) - pmap_expand_kmap(virt, VM_PROT_READ|VM_PROT_WRITE); - } - /* - * Switch to using new page tables - */ - apr_data.bits = 0; - apr_data.field.st_base = M88K_BTOP(kernel_pmap->sdt_paddr); - apr_data.field.wt = 1; - apr_data.field.g = 1; - apr_data.field.ci = 1; - apr_data.field.te = 1; /* Translation enable */ - - /* Invalidate entire kernel TLB. */ -#ifdef DEBUG - if ((pmap_con_dbg & (CD_BOOT | CD_FULL)) == (CD_BOOT | CD_FULL)) { - printf("invalidating tlb %x\n", apr_data.bits); - } -#endif - cmmu_flush_remote_tlb(0, 1, 0, -1); -#ifdef DEBUG - if ((pmap_con_dbg & (CD_BOOT | CD_FULL)) == (CD_BOOT | CD_FULL)) { - printf("done invalidating tlb %x\n", apr_data.bits); - } -#endif - - if (mydebug) { - pmap_print(kernel_pmap); - pmap_print_trace(kernel_pmap, (vm_offset_t)0xFFF00000, 1); - } - /* still physical */ - /* Load supervisor pointer to segment table. */ - cmmu_remote_set_sapr(0, apr_data.bits); - /* virtual now on */ -#ifdef DEBUG - printf("running virtual - avail_next 0x%x\n", *phys_start); -#endif - avail_next = *phys_start; - if (mydebug) { - pmap_print_trace(kernel_pmap, proc0paddr, 1); - } - -} /* pmap_bootstrap() */ - -/* - * Bootstrap memory allocator. This function allows for early dynamic - * memory allocation until the virtual memory system has been bootstrapped. - * After that point, either kmem_alloc or malloc should be used. This - * function works by stealing pages from the (to be) managed page pool, - * stealing virtual address space, then mapping the pages and zeroing them. - * - * It should be used from pmap_bootstrap till vm_page_startup, afterwards - * it cannot be used, and will generate a panic if tried. Note that this - * memory will never be freed, and in essence it is wired down. - */ - -void * -pmap_bootstrap_alloc(int size) -{ - register void *mem; - - size = round_page(size); - mem = (void *)virtual_avail; - virtual_avail = pmap_map(virtual_avail, avail_start, - avail_start + size, VM_PROT_READ|VM_PROT_WRITE, CACHE_INH); - avail_start += size; -#ifdef DEBUG - if ((pmap_con_dbg & (CD_BOOT | CD_FULL)) == (CD_BOOT | CD_FULL)) { - printf("pmap_bootstrap_alloc: size %x virtual_avail %x avail_start %x\n", - size, virtual_avail, avail_start); - } -#endif - bzero((void *)mem, size); - return (mem); -} - -/* - * Routine: PMAP_INIT - * - * History - * June 13 90 Fri. Fuzzy - * Rewrite lvl1 --> segment - * lvl3 --> page - * '90.7.19 Fuzzy sdt_zone unused - * - * Function: - * Initialize the pmap module. It is called by vm_init, to initialize - * any structures that the pmap system needs to map virtual memory. - * - * Parameters: - * phys_start physical address of first available page - * (was last set by pmap_bootstrap) - * phys_end physical address of last available page - * - * Extern/Globals - * pv_head_table (OUT) - * pv_lock_table (OUT) - * pmap_modify_list (OUT) - * pmap_phys_start (OUT) - * pmap_phys_end (OUT) - * pmap_initialized(OUT) - * - * Calls: - * kmem_alloc - * zinit - * - * This routine does not really have much to do. It allocates space - * for the pv_head_table, pv_lock_table, pmap_modify_list; and sets these - * pointers. It also initializes zones for pmap structures, pv_entry - * structures, and segment tables. - * - * Last, it sets the pmap_phys_start and pmap_phys_end global - * variables. These define the range of pages 'managed' be pmap. These - * are pages for which pmap must maintain the PV list and the modify - * list. (All other pages are kernel-specific and are permanently - * wired.) - * - * - * kmem_alloc() memory for pv_table - * kmem_alloc() memory for modify_bits - * zinit(pmap_zone) - * zinit(segment zone) - * - */ -void pmap_init(vm_offset_t phys_start, vm_offset_t phys_end) -{ - register long npages; - register vm_offset_t addr; - register vm_size_t s; - register int i; - vm_size_t pvl_table_size; - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_INIT | CD_NORM)) == (CD_INIT | CD_NORM)) - printf("(pmap_init) phys_start %x phys_end %x\n", phys_start, phys_end); -#endif - - /* - * Allocate memory for the pv_head_table, - * the modify bit array, and the pte_page table. - */ - npages = atop(phys_end - phys_start); - pvl_table_size = PV_LOCK_TABLE_SIZE(npages); - s = (vm_size_t)(npages * sizeof(struct pv_entry) /* pv_list */ - #if 0 - + pvl_table_size /* pv_lock_table */ - #endif /* 0 */ - + npages); /* pmap_modify_list */ - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_INIT | CD_FULL)) == (CD_INIT | CD_FULL)) { - printf("(pmap_init) nbr of managed pages = %x\n", npages); - printf("(pmap_init) size of pv_list = %x\n", - npages * sizeof(struct pv_entry)); - } -#endif - - s = round_page(s); - addr = (vm_offset_t)kmem_alloc(kernel_map, s); - - pv_head_table = (pv_entry_t)addr; - addr = (vm_offset_t)(pv_head_table + npages); - - pmap_modify_list = (char *)addr; - - /* - * Only now, when all of the data structures are allocated, - * can we set pmap_phys_start and pmap_phys_end. If we set them - * too soon, the kmem_alloc above will blow up when it causes - * a call to pmap_enter, and pmap_enter tries to manipulate the - * (not yet existing) pv_list. - */ - pmap_phys_start = phys_start; - pmap_phys_end = phys_end; - - pmap_initialized = TRUE; - -} /* pmap_init() */ - - -/* - * Routine: PMAP_ZERO_PAGE - * - * History: - * '90.7.13 Fuzzy - * '90.9.05 Fuzzy - * Bug: template page invalid --> template page valid - * - * template = M88K_TRUNC_PAGE(phys) - * | m88k_protection (kernel_pmap, VM_PROT_READ | VM_PROT_WRITE) - * | DT_VALID; - * ^^^^^^^^ add - * - * Function: - * Zeros the specified (machine independent) page. - * - * Parameters: - * phys PA of page to zero - * - * Extern/Global: - * phys_map_vaddr1 - * - * Calls: - * M88K_TRUNC_PAGE - * m88k_protection - * cmmu_sflush_page - * DO_PTES - * bzero - * - * Special Assumptions: - * no locking required - * - * This routine maps the physical pages ath the 'phys_map' virtual - * address set up in pmap_bootstrap. It flushes the TLB to make the new - * mappings effective, and zeros all the bits. - */ -void pmap_zero_page(vm_offset_t phys) -{ - vm_offset_t srcva; - pte_template_t template; - unsigned int i; - unsigned int spl_sav; - - register int my_cpu = cpu_number(); - pt_entry_t *srcpte; - - srcva = (vm_offset_t)(phys_map_vaddr1 + (my_cpu * PAGE_SIZE)); - srcpte = pmap_pte(kernel_pmap, srcva); - - for (i = 0; i < ptes_per_vm_page; i++, phys += M88K_PGBYTES) - { - template.bits = M88K_TRUNC_PAGE(phys) - | m88k_protection (kernel_pmap, VM_PROT_READ | VM_PROT_WRITE) - | DT_VALID | CACHE_GLOBAL; - - - spl_sav = splblock(); - cmmu_flush_tlb(1, srcva, M88K_PGBYTES); - *srcpte = template.pte; - splx(spl_sav); - bzero (srcva, M88K_PGBYTES); - /* force the data out */ - cmmu_flush_remote_data_cache(my_cpu,phys, M88K_PGBYTES); - } - -} /* pmap_zero_page() */ - - -/* - * Routine: PMAP_CREATE - * - * Author: Fuzzy - * - * History: - * '90.7.13 Fuzzy level 1 --> segment exchange - * '90.7.16 Fuzzy PT_ALIGNED --> PAGE_ALIGNED exchange - * l1_utemplate delete - * '90.7.20 Fuzzy kernel segment entries in segment table - * entries for user space address delete. - * copying kernel segment entries - * to user pmap segment entries delete. - * all user segment table entries initialize - * to zero (invalid). - * - * Function: - * Create and return a physical map. If the size specified for the - * map is zero, the map is an actual physical map, and may be referenced - * by the hardware. If the size specified is non-zero, the map will be - * used in software only, and is bounded by that size. - * - * Paramerters: - * size size of the map - * - * Calls: - * zalloc - * simple_lock_init - * - * This routines allocates a pmap structure and segment translation - * table from the zones set up by pmap_init. The segment table entries - * for user space addresses are initalized to zero (invalid). - * The pmap structure is initalized with the virtual and physical - * addresses of the segment table. The address (virtual) of the - * pmap structure is returned. - */ -pmap_t pmap_create(vm_size_t size) -{ - register pmap_t p; - - /* - * A software use-only map doesn't even need a map. - */ - if (size != 0) - return(PMAP_NULL); - - CHECK_PMAP_CONSISTENCY("pmap_create"); - - p = (pmap_t)malloc(sizeof(*p), M_VMPMAP, M_WAITOK); - if (p == PMAP_NULL) { - panic("pmap_create: cannot allocate a pmap"); - } - - bzero(p, sizeof(*p)); - pmap_pinit(p); - return(p); - -} /* pmap_create() */ - -void -pmap_pinit(pmap_t p) -{ - register pmap_statistics_t stats; - sdt_entry_t *segdt; - int i; - - /* - * Allocate memory for *actual* segment table and *shadow* table. - */ - segdt = kmem_alloc(kernel_map, 2 * SDT_SIZE); - if (segdt == NULL) - panic("pmap_create: kmem_alloc failure"); - -#if 0 - /* maybe, we can use bzero to zero out the segdt. */ - bzero(segdt, 2 * SDT_SIZE); */ -#endif /* 0 */ - /* use pmap zero page to zero it out */ - pmap_zero_page(pmap_extract(kernel_pmap,(vm_offset_t)segdt)); - if (PAGE_SIZE == SDT_SIZE) /* only got half */ - pmap_zero_page(pmap_extract(kernel_pmap,(vm_offset_t)segdt+PAGE_SIZE)); - if (PAGE_SIZE < 2*SDT_SIZE) /* get remainder */ - bzero((vm_offset_t)segdt+PAGE_SIZE, (2*SDT_SIZE)-PAGE_SIZE); - - /* - * Initialize pointer to segment table both virtual and physical. - */ - p->sdt_vaddr = segdt; - p->sdt_paddr = (sdt_entry_t *)pmap_extract(kernel_pmap,(vm_offset_t)segdt); - - if (!PAGE_ALIGNED(p->sdt_paddr)) { - printf("pmap_create: std table = %x\n",(int)p->sdt_paddr); - panic("pmap_create: sdt_table not aligned on page boundary"); - } - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_CREAT | CD_NORM)) == (CD_CREAT | CD_NORM)) { - printf("(pmap_create :%x) pmap=0x%x, sdt_vaddr=0x%x, sdt_paddr=0x%x\n", - curproc, (unsigned)p, p->sdt_vaddr, p->sdt_paddr); - } -#endif - - /* - * memory for page tables should be CACHE DISABLED - */ - pmap_cache_ctrl(kernel_pmap, - (vm_offset_t)segdt, - (vm_offset_t)segdt+SDT_SIZE, - CACHE_INH); - /* - * Initalize SDT_ENTRIES. - */ - /* - * There is no need to clear segment table, since kmem_alloc would - * provides us clean pages. - */ - - /* - * Initialize pmap structure. - */ - p->ref_count = 1; - -#ifdef OMRON_PMAP - /* initialize block address translation cache */ - for (i = 0; i < BATC_MAX; i++) { - p->i_batc[i].bits = 0; - p->d_batc[i].bits = 0; - } -#endif - - /* - * Initialize statistics. - */ - stats = &p->stats; - stats->resident_count = 0; - stats->wired_count = 0; - -#ifdef DEBUG - /* link into list of pmaps, just after kernel pmap */ - p->next = kernel_pmap->next; - p->prev = kernel_pmap; - kernel_pmap->next = p; - p->next->prev = p; -#endif - -} /* pmap_pinit() */ - -/* - * Routine: PMAP_FREE_TABLES (internal) - * - * History: - * '90. 7.16 Fuzzy level 3 --> page discriptor table - * level 1 --> segment discriptor table - * 90/07/20 N.Sugai sdt_zone no longer exist. We must - * use kmem_free instead of zfree. - * '90. 7.26 Fuzzy VM_MIN_ADDRESS -> VM_MIN_USER_ADDRESS - * VM_MIN_KERNEL_ADDRESS -> VM_MAX_USER_ADDRESS - * '90.8.3 Fuzzy - * if defined TEST, 'static' undeclared. - * '90.8.22 Fuzzy Debugging message add - * '90.8.30 Fuzzy - * delete "if defined TEST, 'static' undeclared." - * '90. 9.11 Fuzzy sdt_va: vm_offset_t --> unsigned long - * - * Internal procedure used by pmap_destroy() to actualy deallocate - * the tables. - * - * Parameters: - * pmap pointer to pmap structure - * - * Calls: - * pmap_pte - * kmem_free - * PT_FREE - * - * Special Assumptions: - * No locking is needed, since this is only called which the - * ref_count field of the pmap structure goes to zero. - * - * This routine sequences of through the user address space, releasing - * all translation table space back to the system using PT_FREE. - * The loops are indexed by the virtual address space - * ranges represented by the table group sizes(PDT_TABLE_GROUP_VA_SPACE). - * - */ - -static void pmap_free_tables(pmap_t pmap) -{ - unsigned long sdt_va; /* outer loop index */ - sdt_entry_t *sdttbl; /* ptr to first entry in the segment table */ - pt_entry_t *gdttbl; /* ptr to first entry in a page table */ - unsigned int i,j; - -#if DEBUG - if ((pmap_con_dbg & (CD_FREE | CD_NORM)) == (CD_FREE | CD_NORM)) - printf("(pmap_free_tables :%x) pmap %x\n", curproc, pmap); -#endif - - sdttbl = pmap->sdt_vaddr; /* addr of segment table */ - - /* - This contortion is here instead of the natural loop - because of integer overflow/wraparound if VM_MAX_USER_ADDRESS is near 0xffffffff - */ - - i = VM_MIN_USER_ADDRESS / PDT_TABLE_GROUP_VA_SPACE; - j = VM_MAX_USER_ADDRESS / PDT_TABLE_GROUP_VA_SPACE; - if ( j < 1024 ) j++; - - /* Segment table Loop */ - for ( ; i < j; i++) - { - sdt_va = PDT_TABLE_GROUP_VA_SPACE*i; - if ((gdttbl = pmap_pte(pmap, (vm_offset_t)sdt_va)) != PT_ENTRY_NULL) { -#ifdef DEBUG - if ((pmap_con_dbg & (CD_FREE | CD_FULL)) == (CD_FREE | CD_FULL)) - printf("(pmap_free_tables :%x) free page table = 0x%x\n", curproc, gdttbl); -#endif - PT_FREE(gdttbl); - } - - } /* Segment Loop */ - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_FREE | CD_FULL)) == (CD_FREE | CD_FULL)) - printf("(pmap_free_tables :%x) free segment table = 0x%x\n", curproc, sdttbl); -#endif - /* - * Freeing both *actual* and *shadow* segment tables - */ - kmem_free(kernel_map, (vm_offset_t)sdttbl, 2*SDT_SIZE); - -} /* pmap_free_tables() */ - - -void -pmap_release(register pmap_t p) -{ - pmap_free_tables(p); -#ifdef DBG - DEBUG ((pmap_con_dbg & (CD_DESTR | CD_NORM)) == (CD_DESTR | CD_NORM)) - printf("(pmap_destroy :%x) ref_count = 0\n", curproc); - /* unlink from list of pmap structs */ - p->prev->next = p->next; - p->next->prev = p->prev; -#endif - -} - -/* - * Routine: PMAP_DESTROY - * - * History: - * '90. 7.16 Fuzzy - * - * Function: - * Retire the given physical map from service. Should only be called - * if the map contains no valid mappings. - * - * Parameters: - * pmap pointer to pmap structure - * - * Calls: - * CHECK_PMAP_CONSISTENCY - * PMAP_LOCK, PMAP_UNLOCK - * pmap_free_tables - * zfree - * - * Special Assumptions: - * Map contains no valid mappings. - * - * This routine decrements the reference count in the pmap - * structure. If it goes to zero, pmap_free_tables is called to release - * the memory space to the system. Then, call kmem_free to free the - * pmap structure. - */ -void pmap_destroy(register pmap_t p) -{ - register int c, s; - - if (p == PMAP_NULL) { -#ifdef DEBUG - if ((pmap_con_dbg & (CD_DESTR | CD_NORM)) == (CD_DESTR | CD_NORM)) - printf("(pmap_destroy :%x) pmap is NULL\n", curproc); -#endif - return; - } - - if (p == kernel_pmap) { - panic("pmap_destroy: Attempt to destroy kernel pmap"); - } - - CHECK_PMAP_CONSISTENCY("pmap_destroy"); - - PMAP_LOCK(p, s); - c = --p->ref_count; - PMAP_UNLOCK(p, s); - - if (c == 0) { - pmap_release(p); - free((caddr_t)p,M_VMPMAP); - } - -} /* pmap_destroy() */ - - -/* - * Routine: PMAP_REFERENCE - * - * Author: Fuzzy - * - * Function: - * Add a reference to the specified pmap. - * - * Parameters: - * pmap pointer to pmap structure - * - * Calls: - * PMAP_LOCK, PMAP_UNLOCK - * - * Under a pmap read lock, the ref_count field of the pmap structure - * is incremented. The function then returns. - */ -void pmap_reference(register pmap_t p) -{ - int s; - - if (p != PMAP_NULL) { - PMAP_LOCK(p, s); - p->ref_count++; - PMAP_UNLOCK(p, s); - } - -} /* pmap_reference */ - - -/* - * Routine: PMAP_REMOVE_RANGE (internal) - * - * Update: - * - * July 16, 90 - JUemura initial porting - * '90.7.27 Fuzzy Calls: add Macros - * '90.8.3 Fuzzy if defined TEST, 'static' undeclared. - * '90.8.29 Fuzzy line 112 (if (pte == PT_ENTRY_NULL) { ...) - * delete (check sdt invalid). - * '90.8.30 Fuzzy delete "if defined TEST, 'static' undeclared." - * - * Function: - * Invalidate page table entries associated with the - * given virtual address range. The entries given are the first - * (inclusive) and last (exclusive) entries for the VM pages. - * - * Parameters: - * pmap pointer to pmap structure - * s virtual address of start of range to remove - * e virtual address of start of range to remove - * - * External/Global: - * pv lists - * pmap_modify_list - * - * Calls: - * CHECK_PAGE_ALIGN - * SDTENT - * SDT_VALID - * SDT_NEXT - * pmap_pte - * PDT_VALID - * M88K_PTOB - * PMAP_MANAGED - * PFIDX - * LOCK_PVH - * UNLOCK_PVH - * PFIDX_TO_PVH - * CHECK_PV_LIST - * zfree - * invalidate_pte - * flush_atc_entry - * vm_page_set_modified - * PHYS_TO_VM_PAGE - * - * Special Assumptions: - * The pmap must be locked. - * - * This routine sequences through the pages defined by the given - * range. For each page, pmap_pte is called to obtain a (virtual) - * pointer to the page table entry (PTE) associated with the page's - * virtual address. If the page table entry does not exist, or is invalid, - * nothing need be done. - * - * If the PTE is valid, the routine must invalidated the entry. The - * 'modified' bit, if on, is referenced to the VM through the - * 'vm_page_set_modified' macro, and into the appropriate entry in the - * pmap_modify_list. Next, the function must find the PV list entry - * associated with this pmap/va (if it doesn't exist - the function - * panics). The PV list entry is unlinked from the list, and returned to - * its zone. - */ - -static void pmap_remove_range(pmap_t pmap, vm_offset_t s, vm_offset_t e) -{ - int pfi; - int pfn; - int num_removed = 0, - num_unwired = 0; - register int i; - pt_entry_t *pte; - pv_entry_t prev, cur; - pv_entry_t pvl; - vm_offset_t pa, va, tva; - register unsigned users; - register pte_template_t opte; - int kflush; - - if (e <= s) - panic("pmap_remove_range: end < start"); - - /* - * Pmap has been locked by pmap_remove. - */ - if (pmap == kernel_pmap) { - kflush = 1; - } else { - kflush = 0; - } - - /* - * Loop through the range in vm_page_size increments. - * Do not assume that either start or end fail on any - * kind of page boundary (though this may be true!?). - */ - - CHECK_PAGE_ALIGN(s, "pmap_remove_range - start addr"); - - for (va = s; va < e; va += PAGE_SIZE) { - - sdt_entry_t *sdt; - - sdt = SDTENT(pmap,va); - - if (!SDT_VALID(sdt)) { - va &= SDT_MASK; /* align to segment */ - if (va <= e - (1<<SDT_SHIFT)) - va += (1<<SDT_SHIFT) - PAGE_SIZE; /* no page table, skip to next seg entry */ - else /* wrap around */ - break; - continue; - } - - pte = pmap_pte(pmap,va); - - if (!PDT_VALID(pte)) { - continue; /* no page mapping */ - } - - num_removed++; - - if (pte->wired) - num_unwired++; - - pfn = pte->pfn; - pa = M88K_PTOB(pfn); - - if (PMAP_MANAGED(pa)) { - pfi = PFIDX(pa); - /* - * Remove the mapping from the pvlist for - * this physical page. - */ - pvl = PFIDX_TO_PVH(pfi); - CHECK_PV_LIST(pa, pvl, "pmap_remove_range before"); - - if (pvl->pmap == PMAP_NULL) - panic("pmap_remove: null pv_list"); - - if (pvl->va == va && pvl->pmap == pmap) { - - /* - * Hander is the pv_entry. Copy the next one - * to hander and free the next one (we can't - * free the hander) - */ - cur = pvl->next; - if (cur != PV_ENTRY_NULL) { - *pvl = *cur; - free((caddr_t)cur, M_VMPVENT); - } else { - pvl->pmap = PMAP_NULL; - } - - } else { - - for (prev = pvl; (cur = prev->next) != PV_ENTRY_NULL; prev = cur) { - if (cur->va == va && cur->pmap == pmap) { - break; - } - } - if (cur == PV_ENTRY_NULL) { - printf("pmap_remove_range: looking for VA " - "0x%x PV list at 0x%x\n", va, (unsigned)pvl); - panic("pmap_remove_range: mapping not in pv_list"); - } - - prev->next = cur->next; - free((caddr_t)cur, M_VMPVENT); - } - - CHECK_PV_LIST(pa, pvl, "pmap_remove_range after"); - - } /* if PAGE_MANAGED */ - - /* - * For each pte in vm_page (NOTE: vm_page, not - * M88K (machine dependent) page !! ), reflect - * modify bits to pager and zero (invalidate, - * remove) the pte entry. - */ - tva = va; - for (i = ptes_per_vm_page; i > 0; i--) { - - /* - * Invalidate pte temporarily to avoid being written back - * the modified bit and/or the reference bit by other cpu. - */ - opte.bits = invalidate_pte(pte); - flush_atc_entry(0, tva, kflush); - - if (opte.pte.modified) { - vm_page_set_modified(PHYS_TO_VM_PAGE(opte.bits & M88K_PGMASK)); - /* keep track ourselves too */ - if (PMAP_MANAGED(pa)) - pmap_modify_list[pfi] = 1; - } - pte++; - tva += M88K_PGBYTES; - } - - } /* end for ( va = s; ...) */ - - /* - * Update the counts - */ - pmap->stats.resident_count -= num_removed; - pmap->stats.wired_count -= num_unwired; - -} /* pmap_remove_range */ - -/* - * Routine: PMAP_REMOVE - * - * History: - * '90.7.16 Fuzzy Unchanged - * '90.7.26 Fuzzy VM_MIN_KERNEL_ADDRESS -> VM_MAX_USER_ADDRESS - * '90.8.23 Fuzzy add Debugging message - * - * Function: - * Remove the given range of addresses from the specified map. - * It is assumed that start is properly rounded to the VM page size. - * - * Parameters: - * pmap pointer to pmap structure - * - * Special Assumptions: - * Assumes not all entries must be valid in specified range. - * - * Calls: - * CHECK_PAGE_ALIGN - * PMAP_LOCK, PMAP_UNLOCK - * pmap_remove_range - * panic - * - * After taking pmap read lock, pmap_remove_range is called to do the - * real work. - */ -void -pmap_remove(pmap_t map, vm_offset_t s, vm_offset_t e) -{ - int spl; - - if (map == PMAP_NULL) { - return; - } - -#if DEBUG - if ((pmap_con_dbg & (CD_RM | CD_NORM)) == (CD_RM | CD_NORM)) - printf("(pmap_remove :%x) map %x s %x e %x\n", curproc, map, s, e); -#endif - - CHECK_PAGE_ALIGN(s, "pmap_remove start addr"); - - if (s>e) - panic("pmap_remove: start greater than end address"); - - pmap_remove_range(map, s, e); -} /* pmap_remove() */ - - -/* - * Routine: PMAP_REMOVE_ALL - * - * History: - * '90.7.27 Fuzzy 'Calls:' modify - * '90.8.28 Fuzzy add Debugging message - * - * Function: - * Removes this physical page from all physical maps in which it - * resides. Reflects back modify bits to the pager. - * - * Parameters: - * phys physical address of pages which is to - * be removed from all maps - * - * Extern/Global: - * pv_head_array, pv lists - * pmap_modify_list - * - * Calls: - * PMAP_MANAGED - * SPLVM, SPLX - * PFIDX - * PFIDX_TO_PVH - * CHECK_PV_LIST - * simple_lock - * M88K_PTOB - * PDT_VALID - * pmap_pte - * vm_page_set_modified - * PHYS_TO_VM_PAGE - * zfree - * - * If the page specified by the given address is not a managed page, - * this routine simply returns. Otherwise, the PV list associated with - * that page is traversed. For each pmap/va pair pmap_pte is called to - * obtain a pointer to the page table entry (PTE) associated with the - * va (the PTE must exist and be valid, otherwise the routine panics). - * The hardware 'modified' bit in the PTE is examined. If it is on, the - * pmap_modify_list entry corresponding to the physical page is set to 1. - * Then, the PTE is invalidated, and the PV list entry is unlinked and - * freed. - * - * At the end of this function, the PV list for the specified page - * will be null. - */ -void -pmap_remove_all(vm_offset_t phys) -{ - pv_entry_t pvl, cur; - register pt_entry_t *pte; - int pfi; - register int i; - register vm_offset_t va; - register pmap_t pmap; - int spl; - int dbgcnt = 0; - register unsigned users; - register pte_template_t opte; - int kflush; - - if (!PMAP_MANAGED(phys)) { - /* not a managed page. */ -#ifdef DEBUG - if (pmap_con_dbg & CD_RMAL) - printf("(pmap_remove_all :%x) phys addr 0x%x not a managed page\n", curproc, phys); -#endif - return; - } - - SPLVM(spl); - - /* - * Walk down PV list, removing all mappings. - * We have to do the same work as in pmap_remove_pte_page - * since that routine locks the pv_head. We don't have - * to lock the pv_head, since we have the entire pmap system. - */ -remove_all_Retry: - - pfi = PFIDX(phys); - pvl = PFIDX_TO_PVH(pfi); - CHECK_PV_LIST(phys, pvl, "pmap_remove_all before"); - - /* - * Loop for each entry on the pv list - */ - while ((pmap = pvl->pmap) != PMAP_NULL) { - va = pvl->va; - users = 0; - if (pmap == kernel_pmap) { - kflush = 1; - } else { - kflush = 0; - } - - pte = pmap_pte(pmap, va); - - /* - * Do a few consistency checks to make sure - * the PV list and the pmap are in synch. - */ - if (pte == PT_ENTRY_NULL) { - printf("(pmap_remove_all :%x) phys %x pmap %x va %x dbgcnt %x\n", - (unsigned)curproc, phys, (unsigned)pmap, va, dbgcnt); - panic("pmap_remove_all: pte NULL"); - } - if (!PDT_VALID(pte)) - panic("pmap_remove_all: pte invalid"); - if (M88K_PTOB(pte->pfn) != phys) - panic("pmap_remove_all: pte doesn't point to page"); - if (pte->wired) - panic("pmap_remove_all: removing a wired page"); - - pmap->stats.resident_count--; - - if ((cur = pvl->next) != PV_ENTRY_NULL) { - *pvl = *cur; - free((caddr_t)cur, M_VMPVENT); - } - else - pvl->pmap = PMAP_NULL; - - /* - * Reflect modified pages to pager. - */ - for (i = ptes_per_vm_page; i>0; i--) { - - /* - * Invalidate pte temporarily to avoid being written back - * the modified bit and/or the reference bit by other cpu. - */ - opte.bits = invalidate_pte(pte); - flush_atc_entry(users, va, kflush); - - if (opte.pte.modified) { - vm_page_set_modified((vm_page_t)PHYS_TO_VM_PAGE(phys)); - /* keep track ourselves too */ - pmap_modify_list[pfi] = 1; - } - pte++; - va += M88K_PGBYTES; - } - - /* - * Do not free any page tables, - * leaves that for when VM calls pmap_collect(). - */ - dbgcnt++; - } - CHECK_PV_LIST(phys, pvl, "pmap_remove_all after"); - - SPLX(spl); - -} /* pmap_remove_all() */ - - - - -/* - * Routine: PMAP_COPY_ON_WRITE - * - * History: - * '90. 7.16 Fuzzy level 3 --> page table changed - * '90. 7.19 Fuzzy Comment 'Calls' add - * '90. 7.26 Fuzzy VM_MIN_KERNEL_ADDRESS -> VM_MAX_USER_ADDRESS - * '90. 8.18 Fuzzy Add Debugging Message (PA no mappings) - * '90. 8.18 Fuzzy Bug Fixs - * for (i=ptes_per_vm_page; i>0; i++) { - * ^^ - * for (i=ptes_per_vm_page; i>0; i--) { - * - * Function: - * Remove write privileges from all physical maps for this physical page. - * - * Parameters: - * phys physical address of page to be read-protected. - * - * Calls: - * SPLVM, SPLX - * PFIDX_TO_PVH - * CHECK_PV_LIST - * simple_lock, simple_unlock - * panic - * PDT_VALID - * M88K_PTOB - * pmap_pte - * - * Special Assumptions: - * All mapings of the page are user-space mappings. - * - * This routine walks the PV list. For each pmap/va pair it locates - * the page table entry (the PTE), and sets the hardware enforced - * read-only bit. The TLB is appropriately flushed. - */ -static void pmap_copy_on_write(vm_offset_t phys) -{ - register pv_entry_t pv_e; - register pt_entry_t *pte; - register int i; - int spl, spl_sav; - register unsigned users; - register pte_template_t opte; - int kflush; - - if (!PMAP_MANAGED(phys)) { -#ifdef DEBUG - if (pmap_con_dbg & CD_CMOD) - printf("(pmap_copy_on_write :%x) phys addr 0x%x not managed \n", curproc, phys); -#endif - return; - } - - SPLVM(spl); - - pv_e = PFIDX_TO_PVH(PFIDX(phys)); - CHECK_PV_LIST(phys, pv_e, "pmap_copy_on_write before"); - if (pv_e->pmap == PMAP_NULL) { - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_COW | CD_NORM)) == (CD_COW | CD_NORM)) - printf("(pmap_copy_on_write :%x) phys addr 0x%x not mapped\n", curproc, phys); -#endif - - SPLX(spl); - - return; /* no mappings */ - } - - /* - * Run down the list of mappings to this physical page, - * disabling write privileges on each one. - */ - - while (pv_e != PV_ENTRY_NULL) { - pmap_t pmap; - vm_offset_t va; - - pmap = pv_e->pmap; - va = pv_e->va; - - users = 0; - if (pmap == kernel_pmap) { - kflush = 1; - } else { - kflush = 0; - } - - /* - * Check for existing and valid pte - */ - pte = pmap_pte(pmap, va); - if (pte == PT_ENTRY_NULL) - panic("pmap_copy_on_write: pte from pv_list not in map"); - if (!PDT_VALID(pte)) - panic("pmap_copy_on_write: invalid pte"); - if (M88K_PTOB(pte->pfn) != phys) - panic("pmap_copy_on_write: pte doesn't point to page"); - - /* - * Flush TLBs of which cpus using pmap. - */ - - for (i = ptes_per_vm_page; i > 0; i--) { - - /* - * Invalidate pte temporarily to avoid being written back - * the modified bit and/or the reference bit by other cpu. - */ - spl_sav = splblock(); - opte.bits = invalidate_pte(pte); - opte.pte.prot = M88K_RO; - ((pte_template_t *)pte)->bits = opte.bits; - flush_atc_entry(users, va, kflush); - splx(spl_sav); - pte++; - va += M88K_PGBYTES; - } - - pv_e = pv_e->next; - } - CHECK_PV_LIST(phys, PFIDX_TO_PVH(PFIDX(phys)), "pmap_copy_on_write"); - - SPLX(spl); - -} /* pmap_copy_on_write */ - - - -/* - * Routine: PMAP_PROTECT - * - * History: - * '90.7.16 Fuzzy - * '90.7.26 Fuzzy VM_MIN_KERNEL_ADDRESS -> VM_MAX_USER_ADDRESS - * '90.8.21 Fuzzy Debugging message add - * - * Function: - * Sets the physical protection on the specified range of this map - * as requested. - * - * Parameters: - * pmap pointer to pmap structure - * s start address of start of range - * e end address of end of range - * prot desired protection attributes - * - * Calls: - * m88k_protection - * PMAP_LOCK, PMAP_UNLOCK - * CHECK_PAGE_ALIGN - * panic - * pmap_pte - * SDT_NEXT - * PDT_VALID - * - * This routine sequences through the pages of the specified range. - * For each, it calls pmap_pte to acquire a pointer to the page table - * entry (PTE). If the PTE is invalid, or non-existant, nothing is done. - * Otherwise, the PTE's protection attributes are adjusted as specified. - */ -void pmap_protect( - pmap_t pmap, - vm_offset_t s, - vm_offset_t e, - vm_prot_t prot) -{ - pte_template_t maprot; - unsigned ap; - int spl, spl_sav; - register int i; - pt_entry_t *pte; - vm_offset_t va, tva; - register unsigned users; - register pte_template_t opte; - int kflush; - - if (pmap == PMAP_NULL || prot & VM_PROT_WRITE) - return; - if ((prot & VM_PROT_READ) == 0) { - pmap_remove(pmap, s, e); - return; - } - if (s > e) - panic("pmap_protect: start grater than end address"); - - maprot.bits = m88k_protection(pmap, prot); - ap = maprot.pte.prot; - - PMAP_LOCK(pmap, spl); - - if (pmap == kernel_pmap) { - kflush = 1; - } else { - kflush = 0; - } - - CHECK_PAGE_ALIGN(s, "pmap_protect"); - - /* - * Loop through the range in vm_page_size increment. - * Do not assume that either start or end fall on any - * kind of page boundary (though this may be true ?!). - */ - for (va = s; va <= e; va += PAGE_SIZE) { - - pte = pmap_pte(pmap, va); - - if (pte == PT_ENTRY_NULL) { - - va &= SDT_MASK; /* align to segment */ - if (va <= e - (1<<SDT_SHIFT)) - va += (1<<SDT_SHIFT) - PAGE_SIZE; /* no page table, skip to next seg entry */ - else /* wrap around */ - break; - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_PROT | CD_FULL)) == (CD_PROT | CD_FULL)) - printf("(pmap_protect :%x) no page table :: skip to 0x%x\n", curproc, va + PAGE_SIZE); -#endif - continue; - } - - if (!PDT_VALID(pte)) { -#ifdef DEBUG - if ((pmap_con_dbg & (CD_PROT | CD_FULL)) == (CD_PROT | CD_FULL)) - printf("(pmap_protect :%x) pte invalid pte @ 0x%x\n", curproc, pte); -#endif - continue; /* no page mapping */ - } - - tva = va; - for (i = ptes_per_vm_page; i>0; i--) { - - /* - * Invalidate pte temporarily to avoid being written back - * the modified bit and/or the reference bit by other cpu. - */ - spl_sav = splblock(); - opte.bits = invalidate_pte(pte); - opte.pte.prot = ap; - ((pte_template_t *)pte)->bits = opte.bits; - flush_atc_entry(0, tva, kflush); - splx(spl_sav); - pte++; - tva += M88K_PGBYTES; - } - } - - PMAP_UNLOCK(pmap, spl); - -} /* pmap_protect() */ - - - -/* - * Routine: PMAP_EXPAND - * - * History: - * '90.8.3 Fuzzy - * if defined TEST, 'static' undeclared. - * '90.8.16 Fuzzy - * Extern/Global no --> user_pt_map, kernel_pmap - * added Debug message - * '90.8.30 Fuzzy - * delete "if defined TEST, 'static' undeclared." - * - * Function: - * Expands a pmap to be able to map the specified virtual address. - * New kernel virtual memory is allocated for a page table - * - * Must be called with the pmap system and the pmap unlocked, since - * these must be unlocked to use vm_allocate or vm_deallocate (via - * kmem_alloc, zalloc). Thus it must be called in a unlock/lock loop - * that checks whether the map has been expanded enough. ( We won't loop - * forever, since page table aren't shrunk.) - * - * Parameters: - * map point to map structure - * v VA indicating which tables are needed - * - * Extern/Global: - * user_pt_map - * kernel_pmap - * - * Calls: - * pmap_pte - * kmem_alloc - * kmem_free - * zalloc - * zfree - * pmap_extract - * - * Special Assumptions - * no pmap locks held - * - * 1: This routine immediately allocates space for a page table. - * - * 2: The page table entries (PTEs) are initialized (set invalid), and - * the corresponding segment table entry is set to point to the new - * page table. - * - * - * if (kernel_pmap) - * pmap_expand_kmap() - * ptva = kmem_alloc(user_pt_map) - * - */ -static void pmap_expand(pmap_t map, vm_offset_t v) -{ - int i, - spl; - vm_offset_t pdt_vaddr, - pdt_paddr; - - sdt_entry_t *sdt; - pt_entry_t *pte; - vm_offset_t pmap_extract(); - - if (map == PMAP_NULL) { - panic("pmap_expand: pmap is NULL"); - } - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_EXP | CD_NORM)) == (CD_EXP | CD_NORM)) - printf ("(pmap_expand :%x) map %x v %x\n", curproc, map, v); -#endif - - CHECK_PAGE_ALIGN (v, "pmap_expand"); - - /* - * Handle kernel pmap in pmap_expand_kmap(). - */ - if (map == kernel_pmap) { - PMAP_LOCK(map, spl); - if (pmap_expand_kmap(v, VM_PROT_READ|VM_PROT_WRITE) == PT_ENTRY_NULL) - panic ("pmap_expand: Cannot allocate kernel pte table"); - PMAP_UNLOCK(map, spl); -#ifdef DEBUG - if ((pmap_con_dbg & (CD_EXP | CD_FULL)) == (CD_EXP | CD_FULL)) - printf("(pmap_expand :%x) kernel_pmap\n", curproc); -#endif - return; - } - - /* XXX */ -#ifdef MACH_KERNEL - if (kmem_alloc_wired(kernel_map, &pdt_vaddr, PAGE_SIZE) != KERN_SUCCESS) - panic("pmap_enter: kmem_alloc failure"); - pmap_zero_page(pmap_extract(kernel_pmap, pdt_vaddr)); -#else - pdt_vaddr = kmem_alloc (kernel_map, PAGE_SIZE); -#endif - - pdt_paddr = pmap_extract(kernel_pmap, pdt_vaddr); - - /* - * the page for page tables should be CACHE DISABLED - */ - pmap_cache_ctrl(kernel_pmap, pdt_vaddr, pdt_vaddr+PAGE_SIZE, CACHE_INH); - - PMAP_LOCK(map, spl); - - if ((pte = pmap_pte(map, v)) != PT_ENTRY_NULL) { - /* - * Someone else caused us to expand - * during our vm_allocate. - */ - PMAP_UNLOCK(map, spl); - /* XXX */ - kmem_free (kernel_map, pdt_vaddr, PAGE_SIZE); -#ifdef DEBUG - if (pmap_con_dbg & CD_EXP) - printf("(pmap_expand :%x) table has already allocated\n", curproc); -#endif - return; - } - - /* - * Apply a mask to V to obtain the vaddr of the beginning of - * its containing page 'table group',i.e. the group of - * page tables that fit eithin a single VM page. - * Using that, obtain the segment table pointer that references the - * first page table in the group, and initilize all the - * segment table descriptions for the page 'table group'. - */ - v &= ~((1<<(LOG2_PDT_TABLE_GROUP_SIZE+PDT_BITS+PG_BITS))-1); - - sdt = SDTENT(map,v); - - /* - * Init each of the segment entries to point the freshly allocated - * page tables. - */ - - for (i = PDT_TABLE_GROUP_SIZE; i>0; i--) { - ((sdt_entry_template_t *)sdt)->bits = pdt_paddr | M88K_RW | DT_VALID; - ((sdt_entry_template_t *)(sdt + SDT_ENTRIES))->bits = pdt_vaddr | M88K_RW | DT_VALID; - sdt++; - pdt_paddr += PDT_SIZE; - pdt_vaddr += PDT_SIZE; - } - - PMAP_UNLOCK(map, spl); - -} /* pmap_expand() */ - - - -/* - * Routine: PMAP_ENTER - * - * - * Update: - * July 13,90 - JUemura - * initial porting - * *****TO CHECK***** - * locks removed since we don't have to allocate - * level 2 tables anymore. locks needed? - * '90.7.26 Fuzzy VM_MIN_KERNEL_ADDRESS -> VM_MAX_USER_ADDRESS - * '90.8.17 Fuzzy Debug message added(PV no mapped at VA) - * '90.8.31 Sugai Remove redundant message output - * - * Function: - * Insert the given physical page (p) at the specified virtual - * address (v) in the target phisical map with the protecton requested. - * If specified, the page will be wired down, meaning that the - * related pte can not be reclaimed. - * - * N.B.: This is only routine which MAY NOT lazy-evaluation or lose - * information. That is, this routine must actually insert this page - * into the given map NOW. - * - * Parameters: - * pmap pointer to pmap structure - * va VA of page to be mapped - * pa PA of page to be mapped - * prot protection attributes for page - * wired wired attribute for page - * - * Extern/Global: - * pv_head_array, pv lists - * pmap_modify_list - * - * Calls: - * m88k_protection - * pmap_pte - * pmap_expand - * pmap_remove_range - * zfree - * - * This routine starts off by calling pmap_pte to obtain a (virtual) - * pointer to the page table entry corresponding to given virtual - * address. If the page table itself does not exist, pmap_expand is - * called to allocate it. - * - * If the page table entry (PTE) already maps the given physical page, - * all that is needed is to set the protection and wired attributes as - * given. TLB entries are flushed and pmap_enter returns. - * - * If the page table entry (PTE) maps a different physical page than - * that given, the old mapping is removed by a call to map_remove_range. - * And execution of pmap_enter continues. - * - * To map the new physical page, the routine first inserts a new - * entry in the PV list exhibiting the given pmap and virtual address. - * It then inserts the physical page address, protection attributes, and - * wired attributes into the page table entry (PTE). - * - * - * get machine-dependent prot code - * get the pte for this page - * if necessary pmap expand(pmap,v) - * if (changing wired attribute or protection) { - * flush entry from TLB - * update template - * for (ptes per vm page) - * stuff pte - * } else if (mapped at wrong addr) - * flush entry from TLB - * pmap_remove_range - * } else { - * enter mapping in pv_list - * setup template and stuff ptes - * } - * - */ -void pmap_enter( - register pmap_t pmap, - vm_offset_t va, - vm_offset_t pa, - vm_prot_t prot, - boolean_t wired) -{ - int ap; - int spl, spl_sav; - pv_entry_t pv_e; - pt_entry_t *pte; - vm_offset_t old_pa; - pte_template_t template; - register int i; - int pfi; - pv_entry_t pvl; - register unsigned users; - register pte_template_t opte; - int kflush; - - if (pmap == PMAP_NULL) { - panic("pmap_enter: pmap is NULL"); - } - - CHECK_PAGE_ALIGN (va, "pmap_entry - VA"); - CHECK_PAGE_ALIGN (pa, "pmap_entry - PA"); - - /* - * Range check no longer use, since we use whole address space - */ - -#ifdef DEBUG - if ((pmap_con_dbg & (CD_ENT | CD_NORM)) == (CD_ENT | CD_NORM)) { - if (pmap == kernel_pmap) - printf ("(pmap_enter :%x) pmap kernel va %x pa %x\n", curproc, va, pa); - else - printf ("(pmap_enter :%x) pmap %x va %x pa %x\n", curproc, pmap, va, pa); - } -#endif - - ap = m88k_protection (pmap, prot); - - /* - * Must allocate a new pvlist entry while we're unlocked; - * zalloc may cause pageout (which will lock the pmap system). - * If we determine we need a pvlist entry, we will unlock - * and allocate one. Then will retry, throwing away - * the allocated entry later (if we no longer need it). - */ - pv_e = PV_ENTRY_NULL; - Retry: - - PMAP_LOCK(pmap, spl); - - /* - * Expand pmap to include this pte. Assume that - * pmap is always expanded to include enough M88K - * pages to map one VM page. - */ - while ((pte = pmap_pte(pmap, va)) == PT_ENTRY_NULL) { - /* - * Must unlock to expand the pmap. - */ - PMAP_UNLOCK(pmap, spl); - pmap_expand(pmap, va); - PMAP_LOCK(pmap, spl); - } - - /* - * Special case if the physical page is already mapped - * at this address. - */ - old_pa = M88K_PTOB(pte->pfn); - if (old_pa == pa) { - - users = 0; - if (pmap == kernel_pmap) { - kflush = 1; - } else { - kflush = 0; - } - - /* - * May be changing its wired attributes or protection - */ - - if (wired && !pte->wired) - pmap->stats.wired_count++; - else if (!wired && pte->wired) - pmap->stats.wired_count--; - -/*#ifdef luna88k*/ /* KLUDGE (or is it?) */ /* is it for dealing with IO mem? */ - if (pa >= MAXPHYSMEM) - template.bits = DT_VALID | ap | M88K_TRUNC_PAGE(pa) | CACHE_INH; - else -/*#endif*/ - template.bits = DT_VALID | ap | M88K_TRUNC_PAGE(pa) | CACHE_GLOBAL /*XXX*/; - if (wired) - template.pte.wired = 1; - - /* - * If there is a same mapping, we have nothing to do. - */ - if ( !PDT_VALID(pte) || (pte->wired != template.pte.wired) - || (pte->prot != template.pte.prot)) { - - for (i = ptes_per_vm_page; i>0; i--) { - - /* - * Invalidate pte temporarily to avoid being written back - * the modified bit and/or the reference bit by other cpu. - */ - spl_sav = splblock(); - opte.bits = invalidate_pte(pte); - template.pte.modified = opte.pte.modified; - *pte++ = template.pte; - flush_atc_entry(users, va, kflush); - splx(spl_sav); - template.bits += M88K_PGBYTES; - va += M88K_PGBYTES; - } - } - - } else { /* if ( pa == old_pa) */ - - /* - * Remove old mapping from the PV list if necessary. - */ - if (old_pa != (vm_offset_t) 0) { - /* - * Invalidate the translation buffer, - * then remove the mapping. - */ - pmap_remove_range(pmap, va, va + PAGE_SIZE); - } - - if (PMAP_MANAGED(pa)) { - - /* - * Enter the mappimg in the PV list for this - * physical page. - */ - pfi = PFIDX(pa); - pvl = PFIDX_TO_PVH(pfi); - CHECK_PV_LIST (pa, pvl, "pmap_enter before"); - - if (pvl->pmap == PMAP_NULL) { - - /* - * No mappings yet - */ - pvl->va = va; - pvl->pmap = pmap; - pvl->next = PV_ENTRY_NULL; - - } else { -#ifdef DEBUG - /* - * check that this mapping is not already there - */ - { - pv_entry_t e = pvl; - while (e != PV_ENTRY_NULL) { - if (e->pmap == pmap && e->va == va) - panic ("pmap_enter: already in pv_list"); - e = e->next; - } - } -#endif - /* - * Add new pv_entry after header. - */ - if (pv_e == PV_ENTRY_NULL) { - PMAP_UNLOCK(pmap, spl); - pv_e = (pv_entry_t) malloc(sizeof *pv_e, M_VMPVENT, - M_NOWAIT); - goto Retry; - } - pv_e->va = va; - pv_e->pmap = pmap; - pv_e->next = pvl->next; - pvl->next = pv_e; - /* - * Remeber that we used the pvlist entry. - */ - pv_e = PV_ENTRY_NULL; - } - } - - /* - * And count the mapping. - */ - pmap->stats.resident_count++; - if (wired) - pmap->stats.wired_count++; - -/*#ifdef luna88k */ /* KLUDGE (or is it?) */ - if (pa >= MAXPHYSMEM) - template.bits = DT_VALID | ap | M88K_TRUNC_PAGE(pa) | CACHE_INH; - else - /* SHOULDN't THE NEXT THING HAVE CACHE_GLOBAL? */ -/*#endif */ - template.bits = DT_VALID | ap | M88K_TRUNC_PAGE(pa); - - if (wired) - template.pte.wired = 1; - - DO_PTES (pte, template.bits); - - } /* if ( pa == old_pa ) ... else */ - - PMAP_UNLOCK(pmap, spl); - - if (pv_e != PV_ENTRY_NULL) - free((caddr_t) pv_e, M_VMPVENT); - -} /* pmap_enter */ - - - -/* - * Routine: pmap_change_wiring - * - * Author: Fuzzy - * - * Function: Change the wiring attributes for a map/virtual-address - * Pair. - * Prameterts: - * pmap pointer to pmap structure - * v virtual address of page to be wired/unwired - * wired flag indicating new wired state - * - * Extern/Global: - * pte_per_vm_page - * - * Calls: - * PMAP_LOCK, PMAP_UNLOCK - * pmap_pte - * panic - * - * Special Assumptions: - * The mapping must already exist in the pmap. - */ -void pmap_change_wiring( - pmap_t map, - vm_offset_t v, - boolean_t wired) -{ - register pt_entry_t *pte; - register int i; - int spl; - - PMAP_LOCK(map, spl); - - if ((pte = pmap_pte(map, v)) == PT_ENTRY_NULL) - panic ("pmap_change_wiring: pte missing"); - - if (wired && !pte->wired) - /* - * wiring mapping - */ - map->stats.wired_count++; - - else if (!wired && pte->wired) - /* - * unwired mapping - */ - map->stats.wired_count--; - - for (i = ptes_per_vm_page; i>0; i--) - (pte++)->wired = wired; - - PMAP_UNLOCK(map, spl); - -} /* pmap_change_wiring() */ - - - -/* - * Routine: PMAP_EXTRACT - * - * Author: Fuzzy - * - * Function: - * Extract the physical page address associoated - * with the given map/virtual_address pair. - * - * Parameters: - * pmap pointer to pmap structure - * va virtual address - * - * Calls: - * PMAP_LOCK, PMAP_UNLOCK - * pmap_pte - * - * - * This routine checks BATC mapping first. BATC has been used and - * the specified pmap is kernel_pmap, batc_entry is scanned to find out - * the mapping. - * Then the routine calls pmap_pte to get a (virtual) pointer to - * the page table entry (PTE) associated with the given virtual - * address. If the page table does not exist, or if the PTE is not valid, - * then 0 address is returned. Otherwise, the physical page address from - * the PTE is returned. - */ -vm_offset_t pmap_extract(pmap_t pmap, vm_offset_t va) -{ - register pt_entry_t *pte; - register vm_offset_t pa; - register int i; - int spl; - - if (pmap == PMAP_NULL) - panic("pmap_extract: pmap is NULL"); - - /* - * check BATC first - */ - if (pmap == kernel_pmap && batc_used > 0) - for (i = batc_used-1; i > 0; i--) - if (batc_entry[i].lba == M88K_BTOBLK(va)) { - pa = (batc_entry[i].pba << BATC_BLKSHIFT) | (va & BATC_BLKMASK ); - return(pa); - } - - PMAP_LOCK(pmap, spl); - - if ((pte = pmap_pte(pmap, va)) == PT_ENTRY_NULL) - pa = (vm_offset_t) 0; - else { - if (PDT_VALID(pte)) - pa = M88K_PTOB(pte->pfn); - else - pa = (vm_offset_t) 0; - } - - if (pa) - pa |= (va & M88K_PGOFSET); /* offset within page */ - - PMAP_UNLOCK(pmap, spl); - -#if 0 - printf("pmap_extract ret %x\n", pa); -#endif /* 0 */ - return(pa); - -} /* pamp_extract() */ - -/* - a version for the kernel debugger -*/ - -vm_offset_t pmap_extract_unlocked(pmap_t pmap, vm_offset_t va) -{ - register pt_entry_t *pte; - register vm_offset_t pa; - register int i; - - if (pmap == PMAP_NULL) - panic("pmap_extract: pmap is NULL"); - - /* - * check BATC first - */ - if (pmap == kernel_pmap && batc_used > 0) - for (i = batc_used-1; i > 0; i--) - if (batc_entry[i].lba == M88K_BTOBLK(va)) { - pa = (batc_entry[i].pba << BATC_BLKSHIFT) | (va & BATC_BLKMASK ); - return(pa); - } - - if ((pte = pmap_pte(pmap, va)) == PT_ENTRY_NULL) - pa = (vm_offset_t) 0; - else { - if (PDT_VALID(pte)) - pa = M88K_PTOB(pte->pfn); - else - pa = (vm_offset_t) 0; - } - - if (pa) - pa |= (va & M88K_PGOFSET); /* offset within page */ - - return(pa); - -} /* pamp_extract_unlocked() */ - - -/* - * Routine: PMAP_COPY - * - * History: - * '90.7.16 Fuzzy - * - * Function: - * Copy the range specigfied by src_adr/len from the source map - * to the range dst_addr/len in the destination map. This routine - * is only advisory and need not do anything. - * - * Parameters: - * dst_pmap pointer to destination pmap structure - * src_pmap pointer to source pmap structure - * dst_addr VA in destionation map - * len length of address space being copied - * src_addr VA in source map - * - * At this time, the 88200 pmap implementation does nothing in this - * function. Translation tables in the destination map will be allocated - * at VM fault time. - */ -void pmap_copy( - pmap_t dst_pmap, - pmap_t src_pmap, - vm_offset_t dst_addr, - vm_size_t len, - vm_offset_t src_addr) -{ -#ifdef lint - dst_pmap++; src_pmap++; dst_addr++; len++; src_addr++; -#endif - - -}/* pmap_copy() */ - - -/* - * Routine: PMAP_UPDATE - * - * History: - * '90.7.16 Fuzzy - * '90.8.27 Fuzzy Debugging message add - * - * Function: - * Require that all active physical maps contain no incorrect entries - * NOW. [This update includes forcing updates of any address map - * cashing] - * Generally used to ensure that thread about to run will see a - * semantically correct world. - * - * Parameters: - * none - * - * Call: - * cmmuflush - * - * The 88200 pmap implementation does not defer any operations. - * Therefore, the translation table trees are always consistent while the - * pmap lock is not held. Therefore, there is really no work to do in - * this function other than to flush the TLB. - */ -void pmap_update(void) -{ -#ifdef DBG - if ((pmap_con_dbg & (CD_UPD | CD_FULL)) == (CD_UPD | CD_FULL)) - printf("(pmap_update :%x) Called \n", curproc); -#endif - -}/* pmap_update() */ - - - -/* - * Routine: PMAP_COLLECT - * - * History: - * '90. 7.16 Fuzzy - * '90. 7.26 Fuzzy VM_MIN_ADDRESS --> VM_MIN_USER_ADDRESS - * VM_MIN_KERNEL_ADDRESS --> VM_MAX_USER_ADDRESS - * '90. 7.27 Fuzzy Calls: add Macro - * '90. 8.22 Fuzzy add Debugging message - * '90. 9.11 Fuzzy sdt_va: vm_offset_t --> unsigned long - * - * Runction: - * Garbage collects the physical map system for pages which are - * no longer used. there may well be pages which are not - * referenced, but others may be collected as well. - * Called by the pageout daemon when pages are scarce. - * - * Parameters: - * pmap pointer to pmap structure - * - * Calls: - * CHECK_PMAP_CONSISTENCY - * panic - * PMAP_LOCK, PMAP_UNLOCK - * PT_FREE - * pmap_pte - * pmap_remove_range - * - * The intent of this routine is to release memory pages being used - * by translation tables. They can be release only if they contain no - * valid mappings, and their parent table entry has been invalidated. - * - * The routine sequences through the entries user address space, - * inspecting page-sized groups of page tables for wired entries. If - * a full page of tables has no wired enties, any otherwise valid - * entries are invalidated (via pmap_remove_range). Then, the segment - * table entries corresponding to this group of page tables are - * invalidated. Finally, PT_FREE is called to return the page to the - * system. - * - * If all entries in a segment table are invalidated, it too can - * be returned to the system. - * - * [Note: depending upon compilation options, tables may be in zones - * or allocated through kmem_alloc. In the former case, the - * module deals with a single table at a time.] - */ -void pmap_collect(pmap_t pmap) -{ - - vm_offset_t sdt_va; /* outer loop index */ - vm_offset_t sdt_vt; /* end of segment */ - sdt_entry_t *sdttbl; /* ptr to first entry in the segment table */ - sdt_entry_t *sdtp; /* ptr to index into segment table */ - sdt_entry_t *sdt; /* ptr to index into segment table */ - pt_entry_t *gdttbl; /* ptr to first entry in a page table */ - pt_entry_t *gdttblend; /* ptr to byte after last entry in table group */ - pt_entry_t *gdtp; /* ptr to index into a page table */ - boolean_t found_gdt_wired; /* flag indicating a wired page exists in */ - /* a page table's address range */ - int spl; - unsigned int i,j; - - - - if (pmap == PMAP_NULL) { - panic("pmap_collect: pmap is NULL"); - } - if (pmap == kernel_pmap) { -#ifdef MACH_KERNEL - return; -#else - panic("pmap_collect attempted on kernel pmap"); -#endif - } - - CHECK_PMAP_CONSISTENCY ("pmap_collect"); - -#if DBG - if ((pmap_con_dbg & (CD_COL | CD_NORM)) == (CD_COL | CD_NORM)) - printf ("(pmap_collect :%x) pmap %x\n", curproc, pmap); -#endif - - PMAP_LOCK(pmap, spl); - - sdttbl = pmap->sdt_vaddr; /* addr of segment table */ - sdtp = sdttbl; - - /* - This contortion is here instead of the natural loop - because of integer overflow/wraparound if VM_MAX_USER_ADDRESS is near 0xffffffff - */ - - i = VM_MIN_USER_ADDRESS / PDT_TABLE_GROUP_VA_SPACE; - j = VM_MAX_USER_ADDRESS / PDT_TABLE_GROUP_VA_SPACE; - if ( j < 1024 ) j++; - - /* Segment table loop */ - for ( ; i < j; i++, sdtp += PDT_TABLE_GROUP_SIZE) - { - sdt_va = VM_MIN_USER_ADDRESS + PDT_TABLE_GROUP_VA_SPACE*i; - - gdttbl = pmap_pte(pmap, (vm_offset_t)sdt_va); - - if (gdttbl == PT_ENTRY_NULL) - continue; /* no maps in this range */ - - gdttblend = gdttbl + (PDT_ENTRIES * PDT_TABLE_GROUP_SIZE); - - /* scan page maps for wired pages */ - found_gdt_wired = FALSE; - for (gdtp=gdttbl; gdtp <gdttblend; gdtp++) { - if (gdtp->wired) { - found_gdt_wired = TRUE; - break; - } - } - - if (found_gdt_wired) - continue; /* can't free this range */ - - /* figure out end of range. Watch for wraparound */ - - sdt_vt = sdt_va <= VM_MAX_USER_ADDRESS-PDT_TABLE_GROUP_VA_SPACE ? - sdt_va+PDT_TABLE_GROUP_VA_SPACE : - VM_MAX_USER_ADDRESS; - - /* invalidate all maps in this range */ - pmap_remove_range (pmap, (vm_offset_t)sdt_va, (vm_offset_t)sdt_vt); - - /* - * we can safely deallocated the page map(s) - */ - for (sdt = sdtp; sdt < (sdtp+PDT_TABLE_GROUP_SIZE); sdt++) { - ((sdt_entry_template_t *) sdt) -> bits = 0; - ((sdt_entry_template_t *) sdt+SDT_ENTRIES) -> bits = 0; - } - - /* - * we have to unlock before freeing the table, since PT_FREE - * calls kmem_free or zfree, which will invoke another pmap routine - */ - PMAP_UNLOCK(pmap, spl); - PT_FREE(gdttbl); - PMAP_LOCK(pmap, spl); - - } /* Segment table Loop */ - - PMAP_UNLOCK(pmap, spl); - -#if DBG - if ((pmap_con_dbg & (CD_COL | CD_NORM)) == (CD_COL | CD_NORM)) - printf ("(pmap_collect :%x) done \n", curproc); -#endif - - CHECK_PMAP_CONSISTENCY("pmap_collect"); -} /* pmap collect() */ - - - -/* - * Routine: PMAP_ACTIVATE - * - * Author: Fuzzy - * - * Function: - * Binds the given physical map to the given - * processor, and returns a hardware map description. - * In a mono-processor implementation the my_cpu - * argument is ignored, and the PMAP_ACTIVATE macro - * simply sets the MMU root pointer element of the PCB - * to the physical address of the segment descriptor table. - * - * Parameters: - * pmap pointer to pmap structure - * pcbp pointer to current pcb - * cpu CPU number - */ -void pmap_activate(pmap_t pmap, pcb_t pcb) -{ -#ifdef lint - my_cpu++; -#endif - PMAP_ACTIVATE(pmap, pcb, 0); -} /* pmap_activate() */ - - - -/* - * Routine: PMAP_DEACTIVATE - * - * Author: Fuzzy - * - * Function: - * Unbinds the given physical map from the given processor, - * i.e. the pmap i no longer is use on the processor. - * In a mono-processor the PMAP_DEACTIVATE macro is null. - * - * Parameters: - * pmap pointer to pmap structure - * pcb pointer to pcb - */ -void pmap_deactivate(pmap_t pmap, pcb_t pcb) -{ -#ifdef lint - pmap++; th++; which_cpu++; -#endif - PMAP_DEACTIVATE(pmap, pcb, 0); -} /* pmap_deactivate() */ - - - -/* - * Routine: PMAP_KERNEL - * - * History: - * '90. 7.16 Fuzzy unchanged - * - * Function: - * Retruns a pointer to the kernel pmap. - */ -pmap_t pmap_kernel(void) -{ - return (kernel_pmap); -}/* pmap_kernel() */ - - -/* - * Routine: PMAP_COPY_PAGE - * - * History: - * '90.7.16 Fuzzy M68K --> M88K - * DT_PAGE --> DT_VALID - * - * Function: - * Copies the specified (machine independent) pages. - * - * Parameters: - * src PA of source page - * dst PA of destination page - * - * Extern/Global: - * phys_map_vaddr1 - * phys_map_vaddr2 - * - * Calls: - * m88kprotection - * M88K_TRUNC_PAGE - * cmmu_sflush_page - * DO_PTES - * bcopy - * - * Special Assumptions: - * no locking reauired - * - * This routine maps the phsical pages at the 'phys_map' virtual - * addresses set up in pmap_bootstrap. It flushes the TLB to make the - * new mappings effective, and performs the copy. - */ -void pmap_copy_page(vm_offset_t src, vm_offset_t dst) -{ - vm_offset_t dstva, srcva; - unsigned int spl_sav; - int i; - int aprot; - pte_template_t template; - pt_entry_t *dstpte, *srcpte; - int my_cpu = cpu_number(); - - /* - * Map source physical address. - */ - aprot = m88k_protection (kernel_pmap, VM_PROT_READ | VM_PROT_WRITE); - - srcva = (vm_offset_t)(phys_map_vaddr1 + (cpu_number() * PAGE_SIZE)); - dstva = (vm_offset_t)(phys_map_vaddr2 + (cpu_number() * PAGE_SIZE)); - - srcpte = pmap_pte(kernel_pmap, srcva); - dstpte = pmap_pte(kernel_pmap, dstva); - - for (i=0; i < ptes_per_vm_page; i++, src += M88K_PGBYTES, dst += M88K_PGBYTES) - { - template.bits = M88K_TRUNC_PAGE(src) | aprot | DT_VALID | CACHE_GLOBAL; - - /* do we need to write back dirty bits */ - spl_sav = splblock(); - cmmu_flush_tlb(1, srcva, M88K_PGBYTES); - *srcpte = template.pte; - - /* - * Map destination physical address. - */ - template.bits = M88K_TRUNC_PAGE(dst) | aprot | CACHE_GLOBAL | DT_VALID; - cmmu_flush_tlb(1, dstva, M88K_PGBYTES); - *dstpte = template.pte; - splx(spl_sav); - - bcopy((void*)srcva, (void*)dstva, M88K_PGBYTES); - /* flush source, dest out of cache? */ - cmmu_flush_remote_data_cache(my_cpu, src, M88K_PGBYTES); - cmmu_flush_remote_data_cache(my_cpu, dst, M88K_PGBYTES); - } - -} /* pmap_copy_page() */ - - -/* - * copy_to_phys - * - * Author: Fuzzy - * History: - * 10/17/90 take out of pmap.c of SUN3, and modify for m88k - * - * Copy virtual memory to physical memory by mapping the physical - * memory into virtual memory and then doing a virtual to virtual - * copy with bcopy. - * - * Parameters: - * srcva VA of source page - * dstpa PA of destination page - * bytecount copy byte size - * - * Extern/Global: - * phys_map_vaddr2 - * - * Calls: - * m88kprotection - * M88K_TRUNC_PAGE - * cmmu_sflush_page - * DO_PTES - * bcopy - * - */ -void copy_to_phys( - register vm_offset_t srcva, - register vm_offset_t dstpa, - register int bytecount) -{ - register vm_offset_t dstva; - register pt_entry_t *dstpte; - register int copy_size, offset; - int aprot; - unsigned int i; - pte_template_t template; - - dstva = (vm_offset_t)(phys_map_vaddr2 + (cpu_number() * PAGE_SIZE)); - dstpte = pmap_pte(kernel_pmap, dstva); - copy_size = M88K_PGBYTES; - offset = dstpa - M88K_TRUNC_PAGE(dstpa); - dstpa -= offset; - - aprot = m88k_protection(kernel_pmap, VM_PROT_READ | VM_PROT_WRITE); - while (bytecount > 0){ - copy_size = M88K_PGBYTES - offset; - if (copy_size > bytecount) - copy_size = bytecount; - - /* - * Map distation physical address. - */ - - for (i = 0; i < ptes_per_vm_page; i++) - { - template.bits = M88K_TRUNC_PAGE(dstpa) | aprot | CACHE_WT | DT_VALID; - cmmu_flush_tlb(1, dstva, M88K_PGBYTES); - *dstpte = template.pte; - - dstva += offset; - bcopy((void*)srcva, (void*)dstva, copy_size); - srcva += copy_size; - dstva += copy_size; - dstpa += M88K_PGBYTES; - bytecount -= copy_size; - offset = 0; - } - } -} - -/* - * copy_from_phys - * - * Author: David Rudolph - * History: - * - * Copy physical memory to virtual memory by mapping the physical - * memory into virtual memory and then doing a virtual to virtual - * copy with bcopy. - * - * Parameters: - * srcpa PA of source page - * dstva VA of destination page - * bytecount copy byte size - * - * Extern/Global: - * phys_map_vaddr2 - * - * Calls: - * m88kprotection - * M88K_TRUNC_PAGE - * cmmu_sflush_page - * DO_PTES - * bcopy - * - */ -void copy_from_phys( - register vm_offset_t srcpa, - register vm_offset_t dstva, - register int bytecount) -{ - register vm_offset_t srcva; - register pt_entry_t *srcpte; - register int copy_size, offset; - int aprot; - unsigned int i; - pte_template_t template; - - srcva = (vm_offset_t)(phys_map_vaddr2 + (cpu_number() * PAGE_SIZE)); - srcpte = pmap_pte(kernel_pmap, srcva); - copy_size = M88K_PGBYTES; - offset = srcpa - M88K_TRUNC_PAGE(srcpa); - srcpa -= offset; - - aprot = m88k_protection(kernel_pmap, VM_PROT_READ | VM_PROT_WRITE); - while (bytecount > 0){ - copy_size = M88K_PGBYTES - offset; - if (copy_size > bytecount) - copy_size = bytecount; - - /* - * Map destnation physical address. - */ - - for (i=0; i < ptes_per_vm_page; i++) - { - template.bits = M88K_TRUNC_PAGE(srcpa) | aprot | CACHE_WT | DT_VALID; - cmmu_flush_tlb(1, srcva, M88K_PGBYTES); - *srcpte = template.pte; - - srcva += offset; - bcopy((void*)srcva, (void*)dstva, copy_size); - srcpa += M88K_PGBYTES; - dstva += copy_size; - srcva += copy_size; - bytecount -= copy_size; - offset = 0; - /* cache flush source? */ - } - } -} - -/* - * Routine: PMAP_PAGEABLE - * - * History: - * '90.7.16 Fuzzy - * - * Function: - * Make the specified pages (by pmap, offset) pageable (or not) as - * requested. A page which is not pageable may not take a fault; - * therefore, its page table entry must remain valid for the duration. - * this routine is merely advisory; pmap_enter will specify that - * these pages are to be wired down (or not) as appropriate. - * - * Parameters: - * pmap pointer to pmap structure - * start virtual address of start of range - * end virtual address of end of range - * pageable flag indicating whether range is to be pageable. - * - * This routine currently does nothing in the 88100 implemetation. - */ -void pmap_pageable( - pmap_t pmap, - vm_offset_t start, - vm_offset_t end, - boolean_t pageable) -{ -#ifdef lint - pmap++; start++; end++; pageable++; -#endif -} /* pmap_pagealbe() */ - - - -/* - * Routine: PMAP_REDZONE - * - * History: - * '90.7.16 Fuzzy m68k --> m88K - * pte protection & supervisor bit - * - * Function: - * Give the kernel read-only access to the specified address. This - * is used to detect stack overflows. It is assumed that the address - * specified is the last possible kernel stack address. Therefore, we - * round up to the nearest machine dependent page. - * - * Parameters: - * pmap pointer to pmap structure - * addr virtual address of page to which access should - * be restricted to read-only - * - * Calls: - * M88K_ROUND_PAGE - * PMAP_LOCK - * pmap_pte - * PDT_VALID - * - * This function calls pmap_pte to obtain a pointer to the page - * table entry associated with the given virtual address. If there is a - * page entry, and it is valid, its write protect bit will be set. - */ -void pmap_redzone(pmap_t pmap, vm_offset_t va) -{ - pt_entry_t *pte; - int spl, spl_sav; - register int i; - register unsigned users; - register pte_template_t opte; - int kflush; - - va = M88K_ROUND_PAGE(va); - PMAP_LOCK(pmap, spl); - - users = 0; - if (pmap == kernel_pmap) { - kflush = 1; - } else { - kflush = 0; - } - - if ((pte = pmap_pte(pmap, va)) != PT_ENTRY_NULL && PDT_VALID(pte)) - for (i = ptes_per_vm_page; i > 0; i--) { - - /* - * Invalidate pte temporarily to avoid being written back - * the modified bit and/or the reference bit by other cpu. - */ - spl_sav = splblock(); - opte.bits = invalidate_pte(pte); - opte.pte.prot = M88K_RO; - ((pte_template_t *)pte)->bits = opte.bits; - flush_atc_entry(users, va, kflush); - splx(spl_sav); - pte++; - va +=M88K_PGBYTES; - } - - PMAP_UNLOCK(pmap, spl); - -} /* pmap_redzone() */ - - - -/* - * Routine: PMAP_CLEAR_MODIFY - * - * Author: Fuzzy - * - * History: - * '90.7.24 Fuzzy - * '90.8.21 Fuzzy Debugging message add - * - * Function: - * Clear the modify bits on the specified physical page. - * - * Parameters: - * phys physical address of page - * - * Extern/Global: - * pv_head_table, pv_lists - * pmap_modify_list - * - * Calls: - * PMAP_MANAGED - * SPLVM, SPLX - * PFIDX - * PFIDX_TO_PVH - * CHECK_PV_LIST - * simple_lock, simple_unlock - * pmap_pte - * panic - * - * For managed pages, the modify_list entry corresponding to the - * page's frame index will be zeroed. The PV list will be traversed. - * For each pmap/va the hardware 'modified' bit in the page descripter table - * entry inspected - and turned off if necessary. If any of the - * inspected bits were found on, an TLB flush will be performed. - */ -void pmap_clear_modify(vm_offset_t phys) -{ - pv_entry_t pvl; - int pfi; - pv_entry_t pvep; - pt_entry_t *pte; - pmap_t pmap; - int spl, spl_sav; - register vm_offset_t va; - register int i; - register unsigned users; - register pte_template_t opte; - int kflush; - - if (!PMAP_MANAGED(phys)) { -#ifdef DBG - if (pmap_con_dbg & CD_CMOD) - printf("(pmap_clear_modify :%x) phys addr 0x%x not managed \n", curproc, phys); -#endif - return; - } - - SPLVM(spl); - -clear_modify_Retry: - pfi = PFIDX(phys); - pvl = PFIDX_TO_PVH(pfi); - CHECK_PV_LIST (phys, pvl, "pmap_clear_modify"); - - /* update correspoinding pmap_modify_list element */ - pmap_modify_list[pfi] = 0; - - if (pvl->pmap == PMAP_NULL) { -#ifdef DEBUG - if ((pmap_con_dbg & (CD_CMOD | CD_NORM)) == (CD_CMOD | CD_NORM)) - printf("(pmap_clear_modify :%x) phys addr 0x%x not mapped\n", curproc, phys); -#endif - - SPLX(spl); - return; - } - - /* for each listed pmap, trun off the page modified bit */ - pvep = pvl; - while (pvep != PV_ENTRY_NULL) { - pmap = pvep->pmap; - va = pvep->va; - if (!simple_lock_try(&pmap->lock)) { - goto clear_modify_Retry; - } - - users = 0; - if (pmap == kernel_pmap) { - kflush = 1; - } else { - kflush = 0; - } - - pte = pmap_pte(pmap, va); - if (pte == PT_ENTRY_NULL) - panic("pmap_clear_modify: bad pv list entry."); - - for (i = ptes_per_vm_page; i > 0; i--) { - - /* - * Invalidate pte temporarily to avoid being written back - * the modified bit and/or the reference bit by other cpu. - */ - spl_sav = splblock(); - opte.bits = invalidate_pte(pte); - /* clear modified bit */ - opte.pte.modified = 0; - ((pte_template_t *)pte)->bits = opte.bits; - flush_atc_entry(users, va, kflush); - splx(spl_sav); - pte++; - va += M88K_PGBYTES; - } - - simple_unlock(&pmap->lock); - - pvep = pvep->next; - } - - SPLX(spl); - -} /* pmap_clear_modify() */ - - - -/* - * Routine: PMAP_IS_MODIFIED - * - * History: - * '90. 7.16 Fuzzy - * '90. 7.19 Fuzzy comments 'Calls' - * '90. 8.20 Fuzzy Added debugging message - * '90. 8.20 Fuzzy when panic, print virt_address - * - * Function: - * Return whether or not the specified physical page is modified - * by any physical maps. That is, whether the hardware has - * stored data into the page. - * - * Parameters: - * phys physical address og a page - * - * Extern/Global: - * pv_head_array, pv lists - * pmap_modify_list - * - * Calls: - * simple_lock, simple_unlock - * SPLVM, SPLX - * PMAP_MANAGED - * PFIDX - * PFIDX_TO_PVH - * pmap_pte - * - * If the physical address specified is not a managed page, this - * routine simply returns TRUE (looks like it is returning FALSE XXX). - * - * If the entry in the modify list, corresponding to the given page, - * is TRUE, this routine return TRUE. (This means at least one mapping - * has been invalidated where the MMU had set the modified bit in the - * page descripter table entry (PTE). - * - * Otherwise, this routine walks the PV list corresponding to the - * given page. For each pmap/va pair, the page descripter table entry is - * examined. If a modified bit is found on, the function returns TRUE - * immediately (doesn't need to walk remainder of list). - */ -boolean_t pmap_is_modified(vm_offset_t phys) -{ - pv_entry_t pvl; - int pfi; - pv_entry_t pvep; - pt_entry_t *ptep; - int spl; - int i; - boolean_t modified_flag; - - if (!PMAP_MANAGED(phys)) { -#ifdef DBG - if (pmap_con_dbg & CD_IMOD) - printf("(pmap_is_modified :%x) phys addr 0x%x not managed\n", curproc, phys); -#endif - return(FALSE); - } - - SPLVM(spl); - - pfi = PFIDX(phys); - pvl = PFIDX_TO_PVH(pfi); - CHECK_PV_LIST (phys, pvl, "pmap_is_modified"); -is_mod_Retry: - - if ((boolean_t) pmap_modify_list[pfi]) { - /* we've already cached a modify flag for this page, - no use looking further... */ -#ifdef DBG - if ((pmap_con_dbg & (CD_IMOD | CD_NORM)) == (CD_IMOD | CD_NORM)) - printf("(pmap_is_modified :%x) already cached a modify flag for this page\n", curproc); -#endif - SPLX(spl); - return(TRUE); - } - - if (pvl->pmap == PMAP_NULL) { - /* unmapped page - get info from page_modified array - maintained by pmap_remove_range/ pmap_remove_all */ - modified_flag = (boolean_t) pmap_modify_list[pfi]; -#ifdef DBG - if ((pmap_con_dbg & (CD_IMOD | CD_NORM)) == (CD_IMOD | CD_NORM)) - printf("(pmap_is_modified :%x) phys addr 0x%x not mapped\n", curproc, phys); -#endif - SPLX(spl); - return(modified_flag); - } - - /* for each listed pmap, check modified bit for given page */ - pvep = pvl; - while (pvep != PV_ENTRY_NULL) { - if (!simple_lock_try(&pvep->pmap->lock)) { - UNLOCK_PVH(pfi); - goto is_mod_Retry; - } - - ptep = pmap_pte(pvep->pmap, pvep->va); - if (ptep == PT_ENTRY_NULL) { - printf("pmap_is_modified: pte from pv_list not in map virt = 0x%x\n", pvep->va); - panic("pmap_is_modified: bad pv list entry"); - } - for (i = ptes_per_vm_page; i > 0; i--) { - if (ptep->modified) { - simple_unlock(&pvep->pmap->lock); -#ifdef DBG - if ((pmap_con_dbg & (CD_IMOD | CD_FULL)) == (CD_IMOD | CD_FULL)) - printf("(pmap_is_modified :%x) modified page pte@0x%x\n", curproc, (unsigned)ptep); -#endif - SPLX(spl); - return(TRUE); - } - ptep++; - } - simple_unlock(&pvep->pmap->lock); - - pvep = pvep->next; - } - - SPLX(spl); - return(FALSE); - -} /* pmap_is_modified() */ - - - -/* - * Routine: PMAP_CLEAR_REFERECE - * - * History: - * '90. 7.16 Fuzzy unchanged - * '90. 7.19 Fuzzy comment "Calls:' add - * '90. 8.21 Fuzzy Debugging message add - * '93. 3. 1 jfriedl Added call to LOCK_PVH - * - * Function: - * Clear the reference bits on the specified physical page. - * - * Parameters: - * phys physical address of page - * - * Calls: - * PMAP_MANAGED - * SPLVM, SPLX - * PFIDX - * PFIDX_TO_PVH - * CHECK_PV_LIST - * simple_lock - * pmap_pte - * panic - * - * Extern/Global: - * pv_head_array, pv lists - * - * For managed pages, the coressponding PV list will be traversed. - * For each pmap/va the hardware 'used' bit in the page table entry - * inspected - and turned off if necessary. If any of the inspected bits - * werw found on, an TLB flush will be performed. - */ -void pmap_clear_reference(vm_offset_t phys) -{ - pv_entry_t pvl; - int pfi; - pv_entry_t pvep; - pt_entry_t *pte; - pmap_t pmap; - int spl, spl_sav; - register vm_offset_t va; - register int i; - register unsigned users; - register pte_template_t opte; - int kflush; - - if (!PMAP_MANAGED(phys)) { -#ifdef DBG - if (pmap_con_dbg & CD_CREF) { - printf("(pmap_clear_reference :%x) phys addr 0x%x not managed\n", curproc,phys); - } -#endif - return; - } - - SPLVM(spl); - -clear_reference_Retry: - pfi = PFIDX(phys); - pvl = PFIDX_TO_PVH(pfi); - CHECK_PV_LIST(phys, pvl, "pmap_clear_reference"); - - - if (pvl->pmap == PMAP_NULL) { -#ifdef DBG - if ((pmap_con_dbg & (CD_CREF | CD_NORM)) == (CD_CREF | CD_NORM)) - printf("(pmap_clear_reference :%x) phys addr 0x%x not mapped\n", curproc,phys); -#endif - SPLX(spl); - return; - } - - /* for each listed pmap, turn off the page refrenced bit */ - pvep = pvl; - while (pvep != PV_ENTRY_NULL) { - pmap = pvep->pmap; - va = pvep->va; - if (!simple_lock_try(&pmap->lock)) { - goto clear_reference_Retry; - } - - users = 0; - if (pmap == kernel_pmap) { - kflush = 1; - } else { - kflush = 0; - } - - pte = pmap_pte(pmap, va); - if (pte == PT_ENTRY_NULL) - panic("pmap_clear_reference: bad pv list entry."); - - for (i = ptes_per_vm_page; i > 0; i--) { - - /* - * Invalidate pte temporarily to avoid being written back - * the modified bit and/or the reference bit by other cpu. - */ - spl_sav = splblock(); - opte.bits = invalidate_pte(pte); - /* clear reference bit */ - opte.pte.pg_used = 0; - ((pte_template_t *)pte)->bits = opte.bits; - flush_atc_entry(users, va, kflush); - splx(spl_sav); - pte++; - va += M88K_PGBYTES; - } - - simple_unlock(&pmap->lock); - - pvep = pvep->next; - } - - SPLX(spl); - -} /* pmap_clear_reference() */ - - - -/* - * Routine: PMAP_IS_REFERENCED - * - * History: - * '90. 7.16 Fuzzy - * '90. 7.19 Fuzzy comment 'Calls:' add - * - * Function: - * Retrun whether or not the specifeid physical page is referenced by - * any physical maps. That is, whether the hardware has touched the page. - * - * Parameters: - * phys physical address of a page - * - * Extern/Global: - * pv_head_array, pv lists - * - * Calls: - * PMAP_MANAGED - * SPLVM - * PFIDX - * PFIDX_TO_PVH - * CHECK_PV_LIST - * simple_lock - * pmap_pte - * - * If the physical address specified is not a managed page, this - * routine simply returns TRUE. - * - * Otherwise, this routine walks the PV list corresponding to the - * given page. For each pmap/va/ pair, the page descripter table entry is - * examined. If a used bit is found on, the function returns TRUE - * immediately (doesn't need to walk remainder of list). - */ -boolean_t pmap_is_referenced(vm_offset_t phys) -{ - pv_entry_t pvl; - int pfi; - pv_entry_t pvep; - pt_entry_t *ptep; - int spl; - int i; - - if (!PMAP_MANAGED(phys)) - return(FALSE); - - SPLVM(spl); - - pfi = PFIDX(phys); - pvl = PFIDX_TO_PVH(pfi); - CHECK_PV_LIST(phys, pvl, "pmap_is_referenced"); - -is_ref_Retry: - - if (pvl->pmap == PMAP_NULL) { - SPLX(spl); - return(FALSE); - } - - /* for each listed pmap, check used bit for given page */ - pvep = pvl; - while (pvep != PV_ENTRY_NULL) { - if (!simple_lock_try(&pvep->pmap->lock)) { - UNLOCK_PVH(pfi); - goto is_ref_Retry; - } - - ptep = pmap_pte(pvep->pmap, pvep->va); - if (ptep == PT_ENTRY_NULL) - panic("pmap_is_referenced: bad pv list entry."); - for (i = ptes_per_vm_page; i > 0; i--) { - if (ptep->pg_used) { - simple_unlock(&pvep->pmap->lock); - SPLX(spl); - return(TRUE); - } - ptep++; - } - simple_unlock(&pvep->pmap->lock); - - pvep = pvep->next; - } - - SPLX(spl); - return(FALSE); -} /* pmap_is referenced() */ - -/* - * Routine: PMAP_VERIFY_FREE - * - * History: - * '90. 7.17 Fuzzy This routine extract vax's pmap.c. - * This do not exit in m68k's pmap.c. - * vm_page_alloc calls this. - * Variables changed below, - * vm_first_phys --> pmap_phys_start - * vm_last_phys --> pmap_phys_end - * Macro chnged below, - * pa_index --> PFIDX - * pai_to_pvh --> PFI_TO_PVH - * - * Calls: - * SPLVM, SPLX - * PFIDX - * PFI_TO_PVH - * - * Global/Extern: - * pmap_initialized - * pmap_phys_start - * pmap_phys_end - * TRUE, FALSE - * PMAP_NULL - * - * This routine check physical address if that have pmap modules. - * It returns TRUE/FALSE. - */ - -boolean_t pmap_verify_free(vm_offset_t phys) -{ - pv_entry_t pv_h; - int spl; - boolean_t result; - - if (!pmap_initialized) - return(TRUE); - - if (!PMAP_MANAGED(phys)) - return(FALSE); - - SPLVM(spl); - - pv_h = PFIDX_TO_PVH(PFIDX(phys)); - - result = (pv_h->pmap == PMAP_NULL); - SPLX(spl); - - return(result); - -} /* pmap_verify_free */ - - -/* - * Routine: PMAP_VALID_PAGE - * - * History: - * '90.7.18 Fuzzy This function do not exist in m68K pmap list. - * vm_page_startup() routine calls this. - * - * The physical address space is dense... there are no holes. - * All addresses provided to vm_page_startup() are valid. - */ -boolean_t pmap_valid_page(vm_offset_t p) -{ -#ifdef lint - p++; -#endif - return(TRUE); -} /* pmap_valid_page() */ - -/* - * Routine: PMAP_PAGE_PROTECT - * - * History: - * '90.8.4 Fuzzy extract vax pmap.c - * - * Calls: - * pmap_copy_on_write - * pmap_remove_all - * - * Lower the permission for all mappings to a given page. - */ -void pmap_page_protect(vm_offset_t phys, vm_prot_t prot) -{ - switch (prot) { - case VM_PROT_READ: - case VM_PROT_READ|VM_PROT_EXECUTE: - pmap_copy_on_write(phys); - break; - case VM_PROT_ALL: - break; - default: - pmap_remove_all(phys); - break; - } -} - -#if 0 -/* - * Routine: PAGEMOVE - * - * History: - * - * 11/08/09 N.Sugai Initial version - * - * Function: - * Move pages from one kernel virtual address to another. - * - * Parameters: - * from kernel virtual address of source - * to kernel virtual address of distination - * size size in bytes - * - * Calls: - * PMAP_LOCK - * PMAP_UNLOCK - * LOCK_PVH - * UNLOCK_PVH - * CHECK_PV_LIST - * pmap_pte - * pmap_expand_kmap - * cmmu_sflush - * - * Special Assumptions: - * size must be a multiple of CLBYTES (?) - */ -void pagemove(vm_offset_t from, vm_offset_t to, int size) -{ - vm_offset_t pa; - pt_entry_t *srcpte, *dstpte; - int pfi; - pv_entry_t pvl; - int spl; - register int i; - register unsigned users; - register pte_template_t opte; - - PMAP_LOCK(kernel_pmap, spl); - - users = 0; - - while (size > 0) { - - /* - * check if the source addr is mapped - */ - if ((srcpte = pmap_pte(kernel_pmap, (vm_offset_t)from)) == PT_ENTRY_NULL) { - printf("pagemove: source vaddr 0x%x\n", from); - panic("pagemove: Source addr not mapped"); - } - - /* - * - */ - if ((dstpte = pmap_pte(kernel_pmap, (vm_offset_t)to)) == PT_ENTRY_NULL) - if ((dstpte = pmap_expand_kmap((vm_offset_t)to, VM_PROT_READ | VM_PROT_WRITE)) - == PT_ENTRY_NULL) - panic("pagemove: Cannot allocate distination pte"); - /* - * - */ - if (dstpte->dtype == DT_VALID) { - printf("pagemove: distination vaddr 0x%x, pte = 0x%x\n", to, *((unsigned *)dstpte)); - panic("pagemove: Distination pte already valid"); - } - -#ifdef DBG - if ((pmap_con_dbg & (CD_PGMV | CD_NORM)) == (CD_PGMV | CD_NORM)) - printf("(pagemove :%x) from 0x%x to 0x%x\n", curproc, from, to); - if ((pmap_con_dbg & (CD_PGMV | CD_FULL)) == (CD_PGMV | CD_FULL)) - printf("(pagemove :%x) srcpte @ 0x%x = %x dstpte @ 0x%x = %x\n", curproc, (unsigned)srcpte, *(unsigned *)srcpte, (unsigned)dstpte, *(unsigned *)dstpte); - -#endif /* DBG */ - - /* - * Update pv_list - */ - pa = M88K_PTOB(srcpte->pfn); - if (PMAP_MANAGED(pa)) { - pfi = PFIDX(pa); - pvl = PFIDX_TO_PVH(pfi); - CHECK_PV_LIST(pa, pvl, "pagemove"); - pvl->va = (vm_offset_t)to; - } - - /* - * copy pte - */ - for (i = ptes_per_vm_page; i > 0; i--) { - /* - * Invalidate pte temporarily to avoid being written back - * the modified bit and/or the reference bit by other cpu. - */ - opte.bits = invalidate_pte(srcpte); - flush_atc_entry(users, from, 1); - ((pte_template_t *)dstpte)->bits = opte.bits; - from += M88K_PGBYTES; - to += M88K_PGBYTES; - srcpte++; dstpte++; - } - size -= PAGE_SIZE; - } - - PMAP_UNLOCK(kernel_pmap, spl); - -} /* pagemove */ - -#endif /* 0 */ -/* - * Routine: icache_flush - * - * Function: - * Invalidate instruction cache for all CPUs on specified - * physical address. Called when a page is removed from a - * vm_map. This is done because the Instruction CMMUs are not - * snooped, and if a page is subsequently used as a text page, - * we want the CMMUs to re-load the cache for the page. - * - * Parameters: - * pa physical address of the (vm) page - * - * Extern/globals: - * ptes_per_vm_page - * - * Calls: - * cachefall - * - * Called by: - * vm_remove_page - * - */ -void icache_flush(vm_offset_t pa) -{ - register int i; - register int cpu = 0; - - for (i = ptes_per_vm_page; i > 0; i--, pa += M88K_PGBYTES) { - cmmu_flush_remote_inst_cache(cpu, pa, M88K_PGBYTES); - } - -} /* icache_flush */ - -/* - * Routine: pmap_dcache_flush - * - * Function: - * Flush DATA cache on specified virtual address. - * - * Parameters: - * pmap specify pmap - * va virtual address of the (vm) page to be flushed - * - * Extern/globals: - * pmap_pte - * ptes_per_vm_page - * - * Calls: - * dcacheflush - * - */ -void pmap_dcache_flush(pmap_t pmap, vm_offset_t va) -{ - register vm_offset_t pa; - register int i; - int spl; - - if (pmap == PMAP_NULL) - panic("pmap_dcache_flush: pmap is NULL"); - - PMAP_LOCK(pmap, spl); - - pa = M88K_PTOB((pmap_pte(pmap, va))->pfn); - for (i = ptes_per_vm_page; i > 0; i--, pa += M88K_PGBYTES) { - cmmu_flush_data_cache(pa, M88K_PGBYTES); - } - - PMAP_UNLOCK(pmap, spl); - - -} /* pmap_dcache_flush */ - -static void cache_flush_loop(int mode, vm_offset_t pa, int size) -{ - register int i; - register int ncpus; - void (*cfunc)(int cpu, vm_offset_t physaddr, int size); - - switch (mode) { - default: - panic("bad cache_flush_loop mode"); - return; - - case FLUSH_CACHE: /* All caches, all CPUs */ - ncpus = NCPUS; - cfunc = cmmu_flush_remote_cache; - break; - - case FLUSH_CODE_CACHE: /* Instruction caches, all CPUs */ - ncpus = NCPUS; - cfunc = cmmu_flush_remote_inst_cache; - break; - - case FLUSH_DATA_CACHE: /* Data caches, all CPUs */ - ncpus = NCPUS; - cfunc = cmmu_flush_remote_data_cache; - break; - - case FLUSH_LOCAL_CACHE: /* Both caches, my CPU */ - ncpus = 1; - cfunc = cmmu_flush_remote_cache; - break; - - case FLUSH_LOCAL_CODE_CACHE: /* Instruction cache, my CPU */ - ncpus = 1; - cfunc = cmmu_flush_remote_inst_cache; - break; - - case FLUSH_LOCAL_DATA_CACHE: /* Data cache, my CPU */ - ncpus = 1; - cfunc = cmmu_flush_remote_data_cache; - break; - } - - if (ncpus == 1) { - (*cfunc)(cpu_number(), pa, size); - } - else { - for (i=0; i<NCPUS; i++) { - (*cfunc)(i, pa, size); - } - } -} - -/* - * pmap_cache_flush - * Internal function. - */ -void pmap_cache_flush( - pmap_t pmap, - vm_offset_t virt, - int bytes, - int mode) -{ - register vm_offset_t pa; - register vm_offset_t va; - register int i; - int spl; - - if (pmap == PMAP_NULL) - panic("pmap_dcache_flush: NULL pmap"); - - /* - * If it is more than a couple of pages, just blow the whole cache - * because of the number of cycles involved. - */ - if (bytes > 2*M88K_PGBYTES) { - cache_flush_loop(mode, 0, -1); - return; - } - - PMAP_LOCK(pmap, spl); - for(va = virt; bytes > 0; bytes -= M88K_PGBYTES,va += M88K_PGBYTES) { - pa = M88K_PTOB((pmap_pte(pmap, va))->pfn); - for (i = ptes_per_vm_page; i > 0; i--, pa += M88K_PGBYTES) { - cache_flush_loop(mode, pa, M88K_PGBYTES); - } - } - PMAP_UNLOCK(pmap, spl); -} /* pmap_ccacheflush */ - - -#ifdef JUNK -/* - * Machine-level page attributes - * - * This implementation was lifted from the MIPS pmap module. - * We currently only use it to invalidate the I-Cache for - * debugger use. - * - * These are infrequently used features of the M88K CMMU, - * basically cache control functions. The cachability - * property of mappings must be remembered across paging - * operations, so that they can be restored on need. - * - * Obviously these attributes will be used in a sparse - * fashion, so we use a simple list of attribute-value - * pairs. - * - * Some notes on the cache management based upon my quick - * calculation and previous experience. - * We must carefully weigh the cost of cache invalidate time to - * cache refill time. If "cachefall()" is called for more than - * two pages, it is usually faster to simply invalidate the entire - * cache and let it refill, since the number of cycles required to - * perform the invalidate becomes greater than the number to refill. - * If we are only performing an invalidate for something like a - * debugger breakpoint, it becomes worthwhile to only perform a - * line invalidate. Remember, we must account for the amount of - * time required to perform the pmap lookups. - */ -/* - * pmap_attributes: - * - * Set/Get special memory attributes - * - * This is currently only used to invalidate the I-cache when a - * breakpoint is set by the debugger. - * - */ -int pmap_attribute( - pmap_t pmap, - vm_offset_t address, - vm_size_t size, - vm_machine_attribute_t attribute, - vm_machine_attribute_val_t* value) /* IN/OUT */ -{ - register vm_offset_t start, end; - int ret; -#ifdef notyet - pmap_attribute_t a; -#endif - - if (attribute != MATTR_CACHE) - return KERN_INVALID_ARGUMENT; - - if (pmap == PMAP_NULL) - return KERN_SUCCESS; - - start = trunc_page(address); - end = round_page(address + size); - ret = KERN_SUCCESS; - - - /* All we are looking for right now is an instruction cache flush. - */ - switch(*value) { - case MATTR_VAL_CACHE_FLUSH: - pmap_cache_flush(pmap, start, size, FLUSH_CACHE); - break; - case MATTR_VAL_DCACHE_FLUSH: - pmap_cache_flush(pmap, start, size, FLUSH_DATA_CACHE); - break; - case MATTR_VAL_ICACHE_FLUSH: - pmap_cache_flush(pmap, start, size, FLUSH_CODE_CACHE); - /* ptrace_user_iflush(pmap, start, size); */ - break; - - default: - ret = KERN_INVALID_ARGUMENT; - } - - return ret; -} -#endif /* JUNK */ -#ifdef DEBUG -/* - * DEBUGGING ROUTINES - check_pv_list and check_pmp_consistency are used - * only for debugging. They are invoked only - * through the macros CHECK_PV_LIST AND CHECK_PMAP_CONSISTENCY - * defined early in this sourcefile. - */ - -/* - * Routine: CHECK_PV_LIST (internal) - * - * History: - * '90.7.13 Fuzzy - * '90.8.3 Fuzzy - * if defined TEST, 'static' undeclared. - * '90.8.30 Fuzzy - * delete "if defined TEST, 'static' undeclared." - * - * Function: - * Debug-mode routine to check consistency of a PV list. First, it - * makes sure every map thinks the physical page is the same. This - * should be called by all routines which touch a PV list. - * - * Parameters: - * phys physical address of page whose PV list is - * to be checked - * pv_h pointer to head to the PV list - * who string containing caller's name to be - * printed if a panic arises - * - * Extern/Global: - * pv_head_array, pv lists - * - * Calls: - * pmap_extract - * - * Special Assumptions: - * No locking is required. - * - * This function walks the given PV list. For each pmap/va pair, - * pmap_extract is called to obtain the physical address of the page from - * the pmap in question. If the retruned physical address does not match - * that for the PV list being perused, the function panics. - */ - -static void check_pv_list(vm_offset_t phys, pv_entry_t pv_h, char *who) -{ - pv_entry_t pv_e; - pt_entry_t *pte; - vm_offset_t pa; - - if (pv_h != PFIDX_TO_PVH(PFIDX(phys))) { - printf("check_pv_list: incorrect pv_h supplied.\n"); - panic(who); - } - - if (!PAGE_ALIGNED(phys)) { - printf("check_pv_list: supplied phys addr not page aligned.\n"); - panic(who); - } - - if (pv_h->pmap == PMAP_NULL) { - if (pv_h->next != PV_ENTRY_NULL) { - printf("check_pv_list: first entry has null pmap, but list non-empty.\n"); - panic(who); - } - else return; /* proper empry lst */ - } - - pv_e = pv_h; - while (pv_e != PV_ENTRY_NULL) { - if (!PAGE_ALIGNED(pv_e->va)) { - printf("check_pv_list: non-aligned VA in entry at 0x%x.\n", pv_e); - panic(who); - } - /* - * We can't call pmap_extract since it requires lock. - */ - if ((pte = pmap_pte(pv_e->pmap, pv_e->va)) == PT_ENTRY_NULL) - pa = (vm_offset_t)0; - else - pa = M88K_PTOB(pte->pfn) | (pv_e->va & M88K_PGOFSET); - - if (pa != phys) { - printf("check_pv_list: phys addr diff in entry at 0x%x.\n", pv_e); - panic(who); - } - - pv_e = pv_e->next; - } - -} /* check_pv_list() */ - -/* - * Routine: CHECK_MAP (itnernal) - * - * History: - * June 13 '90 Fuzzy - * Rewrite level 1 --> segment - * level 3 --> page - * '90.8.3 Fuzzy - * if defined TEST, 'static' undeclared. - * '90.8.30 Fuzzy - * delete "if defined TEST, 'static' undeclared." - * - * - * Function: - * Debug mode routine to check consistency of map. - * Called by check_pmap_consistency only. - * - * Parameters: - * map pointer to pmap structure - * s start of range to be checked - * e end of range to be checked - * who string containing caller's name to be - * printed if a panic arises - * - * Extern/Global: - * pv_head_array, pv lists - * - * Calls: - * pmap_pte - * - * Special Assumptions: - * No locking required. - * - * This function sequences through the given range of addresses. For - * each page, pmap_pte is called to obtain the page table entry. If - * its valid, and the physical page it maps is managed, the PV list is - * searched for the corresponding pmap/va entry. If not found, the - * function panics. If duplicate PV list entries are found, the function - * panics. - */ - -static void check_map( - pmap_t map, - vm_offset_t s, - vm_offset_t e, - char *who) -{ - vm_offset_t va, - old_va, - phys; - pv_entry_t pv_h, - pv_e, - saved_pv_e; - pt_entry_t *ptep; - boolean_t found; - int loopcnt; - - - /* - * for each page in the address space, check to see if there's - * a valid mapping. If so makes sure it's listed in the PV_list. - */ - - if ((pmap_con_dbg & (CD_CHKM | CD_NORM)) == (CD_CHKM | CD_NORM)) - printf("(check_map) checking map at 0x%x\n", map); - - old_va = s; - for (va = s; va < e; va += PAGE_SIZE) { - /* check for overflow - happens if e=0xffffffff */ - if (va < old_va) - break; - else - old_va = va; - - if (va == phys_map_vaddr1 || va == phys_map_vaddr2) - /* don't try anything with these */ - continue; - - ptep = pmap_pte(map, va); - - if (ptep == PT_ENTRY_NULL) { - /* no page table, skip to next segment entry */ - va = SDT_NEXT(va)-PAGE_SIZE; - continue; - } - - if (!PDT_VALID(ptep)) - continue; /* no page mapping */ - - phys = M88K_PTOB(ptep->pfn); /* pick up phys addr */ - - if (!PMAP_MANAGED(phys)) - continue; /* no PV list */ - - /* note: vm_page_startup allocates some memory for itself - through pmap_map before pmap_init is run. However, - it doesn't adjust the physical start of memory. - So, pmap thinks those pages are managed - but they're - not actually under it's control. So, the following - conditional is a hack to avoid those addresses - reserved by vm_page_startup */ - /* pmap_init also allocate some memory for itself. */ - - if (map == kernel_pmap && - va < round_page((vm_offset_t)(pmap_modify_list + (pmap_phys_end - pmap_phys_start)))) - continue; - - pv_h = PFIDX_TO_PVH(PFIDX(phys)); - found = FALSE; - - if (pv_h->pmap != PMAP_NULL) { - - loopcnt = 10000; /* loop limit */ - pv_e = pv_h; - while(pv_e != PV_ENTRY_NULL) { - - if (loopcnt-- < 0) { - printf("check_map: loop in PV list at PVH 0x%x (for phys 0x%x)\n", pv_h, phys); - panic(who); - } - - if (pv_e->pmap == map && pv_e->va == va) { - if (found) { - printf("check_map: Duplicate PV list entries at 0x%x and 0x%x in PV list 0x%x.\n", saved_pv_e, pv_e, pv_h); - printf("check_map: for pmap 0x%x, VA 0x%x,phys 0x%x.\n", map, va, phys); - panic(who); - } - else { - found = TRUE; - saved_pv_e = pv_e; - } - } - pv_e = pv_e->next; - } - } - - if (!found) { - printf("check_map: Mapping for pmap 0x%x VA 0x%x Phys 0x%x does not appear in PV list 0x%x.\n", map, va, phys, pv_h); - } - } - - if ((pmap_con_dbg & (CD_CHKM | CD_NORM)) == (CD_CHKM | CD_NORM)) - printf("(check_map) done \n"); - -} /* check_map() */ - -/* - * Routine: CHECK_PMAP_CONSISTENCY (internal) - * - * History: - * '90. 7.16 Fuzzy - * '90.8.3 Fuzzy - * if defined TEST, 'static' undeclared. - * '90.8.30 Fuzzy - * delete "if defined TEST, 'static' undeclared." - * - * Function: - * Debug mode routine which walks all pmap, checking for internal - * consistency. We are called UNLOCKED, so we'll take the write - * lock. - * - * Parameters: - * who string containing caller's name tobe - * printed if a panic arises - * - * Extern/Global: - * list of pmap structures - * - * Calls: - * check map - * check pv_list - * - * This function obtains the pmap write lock. Then, for each pmap - * structure in the pmap struct queue, it calls check_map to verify the - * consistency of its translation table hierarchy. - * - * Once all pmaps have been checked, check_pv_list is called to check - * consistency of the PV lists for each managed page. - * - * NOTE: Added by Sugai 10/29/90 - * There are some pages do not appaer in PV list. These pages are - * allocated for pv structures by kmem_alloc called in pmap_init. - * Though they are in the range of pmap_phys_start to pmap_phys_end, - * PV maniupulations had not been activated when these pages were alloceted. - * - */ - -static void check_pmap_consistency(char *who) -{ - pmap_t p; - int i; - vm_offset_t phys; - pv_entry_t pv_h; - int spl; - - if ((pmap_con_dbg & (CD_CHKPM | CD_NORM)) == (CD_CHKPM | CD_NORM)) - printf("check_pmap_consistency (%s :%x) start.\n", who, curproc); - - if (pv_head_table == PV_ENTRY_NULL) { - - printf("check_pmap_consistency (%s) PV head table not initialized.\n", who); - return; - } - - SPLVM(spl); - - p = kernel_pmap; - check_map(p, VM_MIN_KERNEL_ADDRESS, VM_MAX_KERNEL_ADDRESS, who); - - /* run through all pmaps. check consistency of each one... */ - i = PMAP_MAX; - for (p = kernel_pmap->next;p != kernel_pmap; p = p->next) { - if (i == 0) { /* can not read pmap list */ - printf("check_pmap_consistency: pmap strcut loop error.\n"); - panic(who); - } - check_map(p, VM_MIN_USER_ADDRESS, VM_MAX_USER_ADDRESS, who); - } - - /* run through all managed paes, check pv_list for each one */ - for (phys = pmap_phys_start; phys < pmap_phys_end; phys += PAGE_SIZE) { - pv_h = PFIDX_TO_PVH(PFIDX(phys)); - check_pv_list(phys, pv_h, who); - } - - SPLX(spl); - - if ((pmap_con_dbg & (CD_CHKPM | CD_NORM)) == (CD_CHKPM | CD_NORM)) - printf("check_pmap consistency (%s :%x): done.\n",who, curproc); - -} /* check_pmap_consistency() */ -#endif /* DBG */ - -/* - * PMAP PRINT MACROS AND ROUTINES FOR DEBUGGING - * These routines are called only from the debugger. - * (No locking required.) - * usually found in pmap.c Fuzzy '90.7.12 - */ - -#define PRINT_SDT(p) \ - printf("%08x : ", \ - ((sdt_entry_template_t *)p)-> bits); \ - printf("table adress=0x%x, prot=%d, dtype=%d\n", \ - M88K_PTOB(p->table_addr), \ - p->prot, \ - p->dtype); - -#define PRINT_PDT(p) \ - printf("%08x : ", \ - ((pte_template_t *)p)-> bits); \ - printf("frame num=0x%x, prot=%d, dtype=%d, wired=%d, modified=%d, pg_used=%d\n", \ - p->pfn, \ - p->prot, \ - p->dtype, \ - p->wired, \ - p->modified, \ - p->pg_used); - -/* - * Routine: PMAP_PRINT - * - * Author: Fuzzy '90.7.12 - * - * History: - * '90.7.25 Fuzzy Null sdt entry skip, and skip count print. - * - * Function: - * Print pmap stucture, including segment table. - * - * Parameters: - * pmap pointer to pmap structure - * - * Special Assumptions: - * No locking required. - * - * This function prints the fields of the pmap structure, then - * iterates through the segment translation table, printing each entry. - */ -void pmap_print (pmap_t pmap) -{ - sdt_entry_t *sdtp; - sdt_entry_t *sdtv; - int i; - - printf("Pmap @ 0x%x:\n", (unsigned)pmap); - sdtp = pmap->sdt_paddr; - sdtv = pmap->sdt_vaddr; - printf(" sdt_paddr: 0x%x; sdt_vaddr: 0x%x; ref_count: %d;\n", - (unsigned)sdtp, (unsigned)sdtv, - pmap->ref_count); - -#ifdef statistics_not_yet_maintained - printf(" statistics: pagesize %d: free_count %d; " - "active_count %d; inactive_count %d; wire_count %d\n", - pmap->stats.pagesize, - pmap->stats.free_count, - pmap->stats.active_count, - pmap->stats.inactive_count, - pmap->stats.wire_count); - - printf(" zero_fill_count %d; reactiveations %d; " - "pageins %d; pageouts %d; faults %d\n", - pmap->stats.zero_fill_count, - pmap->stats.reactivations, - pmap->stats.pageins, - pmap->stats.pageouts, - pmap->stats.fault); - - printf(" cow_faults %d, lookups %d, hits %d\n", - pmap->stats.cow_faults, - pmap->stats.loopups, - pmap->stats.faults); -#endif - - sdtp = (sdt_entry_t *) pmap->sdt_vaddr; /* addr of physical table */ - sdtv = sdtp + SDT_ENTRIES; /* shadow table with virt address */ - if (sdtp == (sdt_entry_t *)0) - printf("Error in pmap - sdt_paddr is null.\n"); - else { - int count = 0; - printf(" Segment table at 0x%x (0x%x):\n", - (unsigned)sdtp, (unsigned)sdtv); - for (i = 0; i < SDT_ENTRIES; i++, sdtp++, sdtv++) { - if ((sdtp->table_addr != 0 ) || (sdtv->table_addr != 0)) { - if (count != 0) - printf("sdt entry %d skip !!\n", count); - count = 0; - printf(" (%x)phys: ", i); - PRINT_SDT(sdtp); - printf(" (%x)virt: ", i); - PRINT_SDT(sdtv); - } - else - count++; - } - if (count != 0) - printf("sdt entry %d skip !!\n", count); - } - -} /* pmap_print() */ - -/* - * Routine: PMAP_PRINT_TRACE - * - * Function: - * Using virt addr, derive phys addr, printing pmap tables along the way. - * - * Parameters: - * pmap pointer to pmap strucuture - * va virtual address whose translation is to be trace - * long_format flag indicating long from output is desired - * - * Special Assumptions: - * No locking required. - * - * This function chases down through the translation tree as - * appropriate for the given virtual address. each table entry - * encoutered is printed. If the long_format is desired, all entries of - * each table are printed, with special indication of the entries used in - * the translation. - */ -void pmap_print_trace ( - pmap_t pmap, - vm_offset_t va, - boolean_t long_format) -{ - sdt_entry_t *sdtp; /* ptr to sdt table of physical addresses */ - sdt_entry_t *sdtv; /* ptr to sdt shadow table of virtual addresses */ - pt_entry_t *ptep; /* ptr to pte table of physical page addresses */ - - int i; /* table loop index */ - unsigned long prev_entry; /* keep track of value of previous table entry */ - int n_dup_entries; /* count contiguous duplicate entries */ - - printf("Trace of virtual address 0x%08x. Pmap @ 0x%08x.\n", - va, (unsigned)pmap); - - /*** SDT TABLES ***/ - /* get addrs of sdt tables */ - sdtp = (sdt_entry_t *)pmap->sdt_vaddr; - sdtv = sdtp + SDT_ENTRIES; - - if (sdtp == SDT_ENTRY_NULL) { - printf(" Segment table pointer (pmap.sdt_paddr) null, trace stops.\n"); - return; - } - - n_dup_entries = 0; - prev_entry = 0xFFFFFFFF; - - if (long_format) { - printf(" Segment table at 0x%08x (virt shadow at 0x%08x)\n", - (unsigned)sdtp, (unsigned)sdtv); - for (i = 0; i < SDT_ENTRIES; i++, sdtp++, sdtv++) { - if (prev_entry == ((sdt_entry_template_t *)sdtp)->bits - && SDTIDX(va) != i && i != SDT_ENTRIES-1) { - n_dup_entries++; - continue; /* suppress duplicate entry */ - } - if (n_dup_entries != 0) { - printf(" - %d duplicate entries skipped -\n",n_dup_entries); - n_dup_entries = 0; - } - prev_entry = ((pte_template_t *)sdtp)->bits; - if (SDTIDX(va) == i) { - printf(" >> (%x)phys: ", i); - } else { - printf(" (%x)phys: ", i); - } - PRINT_SDT(sdtp); - if (SDTIDX(va) == i) { - printf(" >> (%x)virt: ", i); - } else { - printf(" (%x)virt: ", i); - } - PRINT_SDT(sdtv); - } /* for */ - } else { - /* index into both tables for given VA */ - sdtp += SDTIDX(va); - sdtv += SDTIDX(va); - printf(" SDT entry index 0x%x at 0x%x (virt shadow at 0x%x)\n", - SDTIDX(va), (unsigned)sdtp, (unsigned)sdtv); - printf(" phys: "); - PRINT_SDT(sdtp); - printf(" virt: "); - PRINT_SDT(sdtv); - } - - /*** PTE TABLES ***/ - /* get addrs of page (pte) table (no shadow table) */ - - sdtp = ((sdt_entry_t *)pmap->sdt_vaddr) + SDTIDX(va); - #ifdef DBG - printf("*** DEBUG (sdtp) "); - PRINT_SDT(sdtp); - #endif - sdtv = sdtp + SDT_ENTRIES; - ptep = (pt_entry_t *)(M88K_PTOB(sdtv->table_addr)); - if (sdtp->dtype != DT_VALID) { - printf(" segment table entry invlid, trace stops.\n"); - return; - } - - n_dup_entries = 0; - prev_entry = 0xFFFFFFFF; - if (long_format) { - printf(" page table (ptes) at 0x%x\n", (unsigned)ptep); - for (i = 0; i < PDT_ENTRIES; i++, ptep++) { - if (prev_entry == ((pte_template_t *)ptep)->bits - && PDTIDX(va) != i && i != PDT_ENTRIES-1) { - n_dup_entries++; - continue; /* suppress suplicate entry */ - } - if (n_dup_entries != 0) { - printf(" - %d duplicate entries skipped -\n",n_dup_entries); - n_dup_entries = 0; - } - prev_entry = ((pte_template_t *)ptep)->bits; - if (PDTIDX(va) == i) { - printf(" >> (%x)pte: ", i); - } else { - printf(" (%x)pte: ", i); - } - PRINT_PDT(ptep); - } /* for */ - } else { - /* index into page table */ - ptep += PDTIDX(va); - printf(" pte index 0x%x\n", PDTIDX(va)); - printf(" pte: "); - PRINT_PDT(ptep); - } -} /* pmap_print_trace() */ - -/* - * Check whether the current transaction being looked at by dodexc() - * could have been the one that caused a fault. Given the virtual - * address, map, and transaction type, checks whether the page at that - * address is valid, and, for write transactions, whether it has write - * permission. - */ -boolean_t pmap_check_transaction( - pmap_t pmap, - vm_offset_t va, - vm_prot_t type) -{ - pt_entry_t *pte; - sdt_entry_t *sdt; - int spl; - - PMAP_LOCK(pmap, spl); - - if ((pte = pmap_pte(pmap, va)) == PT_ENTRY_NULL) { - PMAP_UNLOCK(pmap, spl); - return FALSE; - } - - if (!PDT_VALID(pte)) { - PMAP_UNLOCK(pmap, spl); - return FALSE; - } - - /* - * Valid pte. If the transaction was a read, there is no way it - * could have been a fault, so return true. For now, assume - * that a write transaction could have caused a fault. We need - * to check pte and sdt entries for write permission to really - * tell. - */ - - if (type == VM_PROT_READ) { - PMAP_UNLOCK(pmap, spl); - return TRUE; - } else { - sdt = SDTENT(pmap,va); - if (sdt->prot || pte->prot) { - PMAP_UNLOCK(pmap, spl); - return FALSE; - } else { - PMAP_UNLOCK(pmap, spl); - return TRUE; - } - } -} - -/* New functions to satisfy rpd - contributed by danner */ - -void pmap_virtual_space( - vm_offset_t *startp, - vm_offset_t *endp) -{ - *startp = virtual_avail; - *endp = virtual_end; -} - -unsigned int pmap_free_pages(void) -{ - return atop(avail_end - avail_next); -} - -boolean_t pmap_next_page(vm_offset_t *addrp) -{ - if (avail_next == avail_end) - return FALSE; - - *addrp = avail_next; - avail_next += PAGE_SIZE; - return TRUE; -} - -#if 0 -#ifdef OMRON_PMAP -/* - * Set BATC - */ -void pmap_set_batc( - pmap_t pmap, - boolean_t data, - int i, - vm_offset_t va, - vm_offset_t pa, - boolean_t super, - boolean_t wt, - boolean_t global, - boolean_t ci, - boolean_t wp, - boolean_t valid) -{ - register batc_template_t batctmp; - - if (i < 0 || i > (BATC_MAX - 1)) { - panic("pmap_set_batc: illegal batc number\n"); - /* bad number */ - return; - } - - batctmp.field.lba = va >> 19; - batctmp.field.pba = pa >> 19; - batctmp.field.sup = super; - batctmp.field.wt = wt; - batctmp.field.g = global; - batctmp.field.ci = ci; - batctmp.field.wp = wp; - batctmp.field.v = valid; - - if (data) { - pmap->d_batc[i].bits = batctmp.bits; - } else { - pmap->i_batc[i].bits = batctmp.bits; - } -} - -void use_batc( - task_t task, - boolean_t data, /* for data-cmmu ? */ - int i, /* batc number */ - vm_offset_t va, /* virtual address */ - vm_offset_t pa, /* physical address */ - boolean_t s, /* for super-mode ? */ - boolean_t wt, /* is writethrough */ - boolean_t g, /* is global ? */ - boolean_t ci, /* is cache inhibited ? */ - boolean_t wp, /* is write-protected ? */ - boolean_t v) /* is valid ? */ -{ - pmap_t pmap; - pmap = vm_map_pmap(task->map); - pmap_set_batc(pmap, data, i, va, pa, s, wt, g, ci, wp, v); -} - -#endif -#endif /* 0 */ -#ifdef notyet -/* - * Machine-level page attributes - * - * The only attribute that may be controlled right now is cacheability. - * - * Obviously these attributes will be used in a sparse - * fashion, so we use a simple sorted list of address ranges - * which possess the attribute. - */ - -/* - * Destroy an attribute list. - */ -void pmap_destroy_ranges(pmap_range_t *ranges) -{ - register pmap_range_t this, next; - - this = *ranges; - while (this != 0) { - next = this->next; - pmap_range_free(this); - this = next; - } - *ranges = 0; -} - -/* - * Lookup an address in a sorted range list. - */ -boolean_t pmap_range_lookup( - pmap_range_t *ranges, - vm_offset_t address) -{ - register pmap_range_t range; - - for (range = *ranges; range != 0; range = range->next) { - if (address < range->start) - return FALSE; - if (address < range->end) - return TRUE; - } - return FALSE; -} - -/* - * Add a range to a list. - * The pmap must be locked. - */ -void pmap_range_add( - pmap_range_t *ranges, - vm_offset_t start, - vm_offset_t end) -{ - register pmap_range_t range, *prev; - - /* look for the start address */ - - for (prev = ranges; (range = *prev) != 0; prev = &range->next) { - if (start < range->start) - break; - if (start <= range->end) - goto start_overlaps; - } - - /* start address is not present */ - - if ((range == 0) || (end < range->start)) { - /* no overlap; allocate a new range */ - - range = pmap_range_alloc(); - range->start = start; - range->end = end; - range->next = *prev; - *prev = range; - return; - } - - /* extend existing range forward to start */ - - range->start = start; - - start_overlaps: - assert((range->start <= start) && (start <= range->end)); - - /* delete redundant ranges */ - - while ((range->next != 0) && (range->next->start <= end)) { - pmap_range_t old; - - old = range->next; - range->next = old->next; - range->end = old->end; - pmap_range_free(old); - } - - /* extend existing range backward to end */ - - if (range->end < end) - range->end = end; -} - -/* - * Remove a range from a list. - * The pmap must be locked. - */ -void pmap_range_remove( - pmap_range_t *ranges, - vm_offset_t start, - vm_offset_t end) -{ - register pmap_range_t range, *prev; - - /* look for start address */ - - for (prev = ranges; (range = *prev) != 0; prev = &range->next) { - if (start <= range->start) - break; - if (start < range->end) { - if (end < range->end) { - pmap_range_t new; - - /* split this range */ - - new = pmap_range_alloc(); - new->next = range->next; - new->start = end; - new->end = range->end; - - range->next = new; - range->end = start; - return; - } - - /* truncate this range */ - - range->end = start; - } - } - - /* start address is not in the middle of a range */ - - while ((range != 0) && (range->end <= end)) { - *prev = range->next; - pmap_range_free(range); - range = *prev; - } - - if ((range != 0) && (range->start < end)) - range->start = end; -} -#endif /* notyet */ diff --git a/sys/arch/mvme88k/mvme88k/process.S b/sys/arch/mvme88k/mvme88k/process.S deleted file mode 100644 index 9369cc63e80..00000000000 --- a/sys/arch/mvme88k/mvme88k/process.S +++ /dev/null @@ -1,270 +0,0 @@ -#ifndef ASSEMBLER /* predefined by ascpp, at least */ -#define ASSEMBLER -#endif - -#include "machine/locore.h" -#include "machine/asm.h" -#include "assym.s" - -#ifndef NBPG -#define NBPG 4096 -#endif /* NBPG */ - - data - align 4 -Lsw0: - string "cpu_switch\n" - align 4 -swchanpanic: - string "switch wchan\n" - align 4 -swsrunpanic: - string "switch SRUN\n" - - text - align 8 -Lswchanpanic: - or.u r2, r0, hi16(swchanpanic) - or r2, r2, lo16(swchanpanic) - bsr _panic - -Lswsrunpanic: - or.u r2, r0, hi16(swsrunpanic) - or r2, r2, lo16(swsrunpanic) - bsr _panic -/* - * At exit of a process, do a cpu_switch for the last time. - * The mapping of the pcb at p->p_addr has already been deleted, - * and the memory for the pcb+stack has been freed. - * The ipl is high enough to prevent the memory from being reallocated. - */ -ENTRY(switch_exit) - /* - * Change pcb to idle u. area, i.e., set r31 to top of stack - * and set curpcb to point to _idle_u. - */ - or.u r31, r0, hi16(_idle_u) - or r31, r31,lo16(_idle_u) - or.u r10, r10,hi16(_curpcb) - or r10, r10,lo16(_curpcb) - st r31, r0, r10 /* curpcb = &idle_u */ - addu r31, r31, UPAGES * NBPG /* now on idle_u stack */ - or.u r10, r0, hi16(_curproc) - st r0, r10, lo16(_curproc) /* curproc = NULL */ - bsr.n _cpu_switch - or r2, r0, r10 - -/* - * When no processes are on the runq, switch - * idles here watiing for something to come ready. - */ -LABEL(idle) - or.u r10, r0, hi16(_curproc) - st r0, r10, lo16(_curproc) /* curproc = NULL */ - - or r2,r0,0 - bsr _spln /*(void) spl0(); */ - ; spin reading _whichqs until nonzero -1: - or.u r10, r0, hi16(_whichqs) - ld r11, r10,lo16(_whichqs) - bcnd eq0, r11, 1b - bsr.n _spln - or r2,r0,6 - br Lsw1 -/* - * cpu_switch() - * XXX - Arg 1 is a proc pointer (curproc) but this doesn't use it. - * XXX - how about using stack for saving spl and last proc? - */ -ENTRY(cpu_switch) - or.u r10, r0, hi16(_curpcb) - ld r10,r10, lo16(_curpcb) - st r1, r10, 0 ; save r1 in pcb - bsr _spl - or.u r10, r0, hi16(_curpcb) ; a call can clobber - ld r10,r10, lo16(_curpcb) ; r10 - so reload it - st r2, r10, 19 * 4 ; save ipl in pcb - or.u r11, r0, hi16(_curproc) - ld r11,r11, lo16(_curproc) - or.u r12, r0, hi16(_lastproc) - or r12, r12, lo16(_lastproc) - st r11, r12, 0 ; lastproc = curproc - or.u r11, r0, hi16(_curproc) - st r0, r11, lo16(_curproc) ; curproc = NULL - bsr.n _spln - or r2,r0,6 -Lsw1: - /* - * Find the highest-priority queue that isn't empty, - * then take the first proc from that queue. - */ - or r6, r0, r0 - or.u r7, r0, hi16(_whichqs) - ld r7, r7, lo16(_whichqs) -Lswchk: - bcnd eq0, r7, idle - ff1 r6, r7 ; 0 <= r6 <= 31 - - or.u r7, r0, hi16(_qs) - or r7, r7, lo16(_qs) - mak r6, r6, 0<3> - lda r8, r7[r6] ; r8 = qs[ff1(whichqs)] - ; r8 is q, r9 is p - ld r9, r8, P_FORW ; p = q->p_forw - ld r12, r9, P_FORW ; r12 is p->p_forw - st r12, r8, P_FORW ; q->p_forw = p->p_forw - st r12, r8, 0 ; q = p->p_forw - ld r12, r9, P_BACK ; r12 is p->p_back - st r12, r8, P_BACK ; q->p_back = p->p_back - lda r8, r7[r6] ; reload r8 with qs[ff1(whichqs)] - ld r12, r8, P_FORW; q->p_forw - cmp r12, r12, r8 ; q == q->p_forw; anyone left on queue? - bb1 ne, r12, Lsw2 ; no, skip - ext r6, r6, 0<3> - add r6, r6, 1 ; turn off the bit we looked at - or.u r7, r0, hi16(_whichqs) - ld r8, r7, lo16(_whichqs) - and.c r8, r8, r6 ; whichqs &= ~the bit - st r8, r7, lo16(_whichqs) ; reset bit in whichqs -Lsw2: - ld r2, r9, P_WCHAN - bcnd ne0, r2, Lswchanpanic - ld.b r2, r9, P_STAT - cmp r2, r2, SRUN - bb1 ne, r2, Lswsrunpanic - - or.u r11, r0, hi16(_want_resched) - st r0, r11, lo16(_want_resched) - - or.u r11, r0, hi16(_curproc) - st r9, r11,lo16(_curproc) ; curproc = p - - or.u r2, r0, hi16(_lastproc) - ld r2, r2, lo16(_lastproc) - - or.u r10, r0, hi16(_curpcb) - ld r10,r10, lo16(_curpcb) - - cmp r2, r2, r9 - bb1 eq, r2, Lswsameproc - - /* - * Save state of previous process in its pcb. - */ - - ; r1 and ipl already saved above - st r14,r10,4 - st r15,r10,2*4 - st r16,r10,3*4 - st r17,r10,4*4 - st r18,r10,5*4 - st r19,r10,6*4 - st r20,r10,7*4 - st r21,r10,8*4 - st r22,r10,9*4 - st r23,r10,10*4 - st r24,r10,11*4 - st r25,r10,12*4 - st r26,r10,13*4 - st r27,r10,14*4 - st r28,r10,15*4 - st r29,r10,16*4 - st r30,r10,17*4 /* save frame pointer */ - st r31,r10,18*4 /* save stack pointer */ - /* ipl already saved */ - ; r9 is curproc - or.u r10, r0, hi16(_curpcb) - or r10,r10, lo16(_curpcb) - st r0, r9, P_BACK ; p->p_back = 0 - ld r3, r9, P_ADDR - st r3, r10, 0 ; curpcb = p->p_addr - /* see if pmap_activate needs to be called */ - ld r2, r9, P_VMSPACE ; vmspace = p->p_vmspace - addu r2, r2, VM_PMAP ; pmap = &vmspace.vm_pmap -#if 0 - ld r5, r2, PM_STCHG ; pmap->st_changed? - bcnd eq0, r5, Lswnochg ; no, skip -#endif - or r14, r0, r9 ; save p in r14 - bsr _pmap_activate ; pmap_activate(pmap, pcb) - or r9, r0, r14 ; restore p saved in r14 - -Lswnochg: - or.u r31, r0, hi16(_intstack_end) - or r31,r31, lo16(_intstack_end); now goto a tmp stack for NMI - bsr.n _load_u_area ; load_u_area(p) - or r2, r0, r9 - or.u r10, r0, hi16(_curpcb) - ld r10, r10, lo16(_curpcb) - ; XXX Is this correct/necessary? - st r10, r14, P_ADDR ; p->p_addr = curpcb; restore p_addr - ; flush some data cache here - - ; restore from the current context - - ld r1,r10,0 - ld r14,r10,4 - ld r15,r10,2*4 - ld r16,r10,3*4 - ld r17,r10,4*4 - ld r18,r10,5*4 - ld r19,r10,6*4 - ld r20,r10,7*4 - ld r21,r10,8*4 - ld r22,r10,9*4 - ld r23,r10,10*4 - ld r24,r10,11*4 - ld r25,r10,12*4 - ld r26,r10,13*4 - ld r27,r10,14*4 - ld r28,r10,15*4 - ld r29,r10,16*4 - ld r30,r10,17*4 /* restore frame pointer */ - ld r31,r10,18*4 /* restore stack pointer */ -Lswsameproc: - ld r2, r10,19*4 /* restore interrupt mask */ - subu r31,r31,40 - st r1, r31,32 ; save r1 on stack - bsr _spln -Lcxswdone: - ld r1, r31,32 ; restore r1 from stack - addu r31,r31,40 - jmp.n r1 - or r2, r0, 1 ; return 1 (for alternate returns) - -/* - * savectx(pcb) - * Update pcb, saving current processor state. - */ -ENTRY(savectx) - /* get the spl mask */ - subu r31,r31,40 /* allocate stack for r1 and args */ - st r1,r31,36 /* save return address */ - st r2,r31,32 /* save r2 */ - bsr _spl /* get the current interrupt mask */ - ld r1,r31,36 /* recover return address */ - ld r10,r31,32 /* recover r2 into r10 */ - addu r31,r31,40 /* put stack pointer back */ - st r1,r10,0 /* do setjmp */ /* save return address */ - st r14,r10,4 - st r15,r10,2*4 - st r16,r10,3*4 - st r17,r10,4*4 - st r18,r10,5*4 - st r19,r10,6*4 - st r20,r10,7*4 - st r21,r10,8*4 - st r22,r10,9*4 - st r23,r10,10*4 - st r24,r10,11*4 - st r25,r10,12*4 - st r26,r10,13*4 - st r27,r10,14*4 - st r28,r10,15*4 - st r29,r10,16*4 - st r30,r10,17*4 /* save frame pointer */ - st r31,r10,18*4 /* save stack pointer */ - st r2, r10,19*4 /* save interrupt mask */ - jmp.n r1 - or r2,r0,r0 diff --git a/sys/arch/mvme88k/mvme88k/process_machdep.c b/sys/arch/mvme88k/mvme88k/process_machdep.c deleted file mode 100644 index 62a3ba89dfb..00000000000 --- a/sys/arch/mvme88k/mvme88k/process_machdep.c +++ /dev/null @@ -1,155 +0,0 @@ -/* $NetBSD: process_machdep.c,v 1.5 1994/11/20 20:54:37 deraadt Exp $ */ - -/* - * Copyright (c) 1993 The Regents of the University of California. - * Copyright (c) 1993 Jan-Simon Pendry - * All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * Jan-Simon Pendry. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * from: Id: procfs_i386.c,v 4.1 1993/12/17 10:47:45 jsp Rel - */ - -/* - * This file may seem a bit stylized, but that so that it's easier to port. - * Functions to be implemented here are: - * - * process_read_regs(proc, regs) - * Get the current user-visible register set from the process - * and copy it into the regs structure (<machine/reg.h>). - * The process is stopped at the time read_regs is called. - * - * process_write_regs(proc, regs) - * Update the current register set from the passed in regs - * structure. Take care to avoid clobbering special CPU - * registers or privileged bits in the PSL. - * The process is stopped at the time write_regs is called. - * - * process_sstep(proc) - * Arrange for the process to trap after executing a single instruction. - * - * process_set_pc(proc) - * Set the process's program counter. - */ - -#include <sys/param.h> -#include <sys/systm.h> -#include <sys/time.h> -#include <sys/kernel.h> -#include <sys/proc.h> -#include <sys/user.h> -#include <sys/vnode.h> -#include <machine/psl.h> -#include <machine/reg.h> -#if 0 -#include <machine/frame.h> -#endif -#include <sys/ptrace.h> - -int -process_read_regs(p, regs) - struct proc *p; - struct reg *regs; -{ -#if 0 - /* NOTE: struct reg == struct trapframe */ - bcopy(p->p_md.md_tf, (caddr_t)regs, sizeof(struct reg)); -#endif - return (0); -} - -int -process_write_regs(p, regs) - struct proc *p; - struct reg *regs; -{ -#if 0 - int psr = p->p_md.md_tf->tf_psr & ~PSR_ICC; - bcopy((caddr_t)regs, p->p_md.md_tf, sizeof(struct reg)); - p->p_md.md_tf->tf_psr = psr | (regs->r_psr & PSR_ICC); -#endif - return (0); -} - -int -process_sstep(p, sstep) - struct proc *p; -{ -#if 0 - if (sstep) - return EINVAL; -#endif - return (0); -} - -int -process_set_pc(p, addr) - struct proc *p; - caddr_t addr; -{ -#if 0 - p->p_md.md_tf->tf_pc = (u_int)addr; - p->p_md.md_tf->tf_npc = (u_int)addr + 4; -#endif - return (0); -} - -int -process_read_fpregs(p, regs) -struct proc *p; -struct fpreg *regs; -{ -#if 0 - extern struct fpstate initfpstate; - struct fpstate *statep = &initfpstate; - - /* NOTE: struct fpreg == struct fpstate */ - if (p->p_md.md_fpstate) - statep = p->p_md.md_fpstate; - bcopy(statep, regs, sizeof(struct fpreg)); -#endif - return 0; -} - -int -process_write_fpregs(p, regs) -struct proc *p; -struct fpreg *regs; -{ -#if 0 - if (p->p_md.md_fpstate == NULL) - return EINVAL; - - bcopy(regs, p->p_md.md_fpstate, sizeof(struct fpreg)); -#endif - return 0; -} diff --git a/sys/arch/mvme88k/mvme88k/swapgeneric.c b/sys/arch/mvme88k/mvme88k/swapgeneric.c deleted file mode 100644 index 5c96676a905..00000000000 --- a/sys/arch/mvme88k/mvme88k/swapgeneric.c +++ /dev/null @@ -1,237 +0,0 @@ -/* - * Copyright (c) 1982, 1986 Regents of the University of California. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * @(#)swapgeneric.c 7.5 (Berkeley) 5/7/91 - * $Id: swapgeneric.c,v 1.1 1995/10/18 12:32:33 deraadt Exp $ - */ - -#include <sys/param.h> -#include <sys/systm.h> -#include <sys/conf.h> -#include <sys/buf.h> -#include <sys/reboot.h> -#include <sys/device.h> -#include <sys/disklabel.h> -#include <sys/fcntl.h> /* XXXX and all that uses it */ -#include <sys/proc.h> /* XXXX and all that uses it */ -#include <sys/disk.h> - -#include "sd.h" -#include "cd.h" - -/* - * Only boot on ufs. (XXX?) - */ -int ffs_mountroot(); -int (*mountroot)() = ffs_mountroot; - -/* - * Generic configuration; all in one - */ -dev_t rootdev = NODEV; -dev_t dumpdev = NODEV; - -struct swdevt swdevt[] = { - { NODEV, 1, 0 }, - { NODEV, 0, 0 }, -}; - -#if NSD > 0 -extern struct cfdriver sdcd; -#endif -#if NCD > 0 -extern struct cfdriver cdcd; -#endif - -struct genericconf { - struct cfdriver *gc_driver; - dev_t gc_root; -}; - -/* - * the system will assign rootdev to the first partition 'a' - * found with FS_BSDFFS fstype. so these should be ordered - * in prefernece of boot. however it does walk units backwards - * to remain compatible with the old amiga method of picking - * the last root found. - */ -struct genericconf genericconf[] = { -#if NSD > 0 - {&sdcd, makedev(4, 0)}, -#endif -#if NCD > 0 - {&cdcd, makedev(6, 0)}, -#endif - { 0 }, -}; - -struct genericconf * -getgenconf(bp) - char *bp; -{ - char *cp; - struct genericconf *gc; - - for (;;) { - printf("root device> "); - gets(bp); - for (gc = genericconf; gc->gc_driver; gc++) - if (gc->gc_driver->cd_name[0] == bp[0] && - gc->gc_driver->cd_name[1] == bp[1]) - break; - if (gc->gc_driver == NULL) { - printf("use one of:"); - for (gc = genericconf; gc->gc_driver; gc++) - printf(" %s%%d", gc->gc_driver->cd_name); - printf("\n"); - continue; - } - cp = bp + 2; - if (*cp >= '0' && *cp <= '9') - break; - printf("bad/missing unit number\n"); - } - return(gc); -} - -setconf() -{ - struct dkdevice *dkp; - struct partition *pp; - struct genericconf *gc; - struct bdevsw *bdp; - int unit, swaponroot; - char name[128]; - char *cp; - - swaponroot = 0; - - if (rootdev != NODEV) - goto justdoswap; - - unit = 0; - if (boothowto & RB_ASKNAME) { - gc = getgenconf(name); - cp = name + 2; - while (*cp >= '0' && *cp <= '9') - unit = 10 * unit + *cp++ - '0'; - if (*cp == '*') - swaponroot = 1; - unit &= 0x7; - goto found; - } - for (gc = genericconf; gc->gc_driver; gc++) { - for (unit = gc->gc_driver->cd_ndevs - 1; unit >= 0; unit--) { - if (gc->gc_driver->cd_devs[unit] == NULL) - continue; - /* - * this is a hack these drivers should use - * dk_dev and not another instance directly above. - */ - dkp = (struct dkdevice *) - ((struct device *)gc->gc_driver->cd_devs[unit] + 1); - if (dkp->dk_driver == NULL || - dkp->dk_driver->d_strategy == NULL) - continue; - for (bdp = bdevsw; bdp < (bdevsw + nblkdev); bdp++) - if (bdp->d_strategy == - dkp->dk_driver->d_strategy) - break; - if (bdp->d_open(MAKEDISKDEV(major(gc->gc_root), - unit, 0), FREAD | FNONBLOCK, 0, curproc)) - continue; - bdp->d_close(MAKEDISKDEV(major(gc->gc_root), unit, - 0), FREAD | FNONBLOCK, 0, curproc); - pp = &dkp->dk_label.d_partitions[0]; - if (pp->p_size == 0 || pp->p_fstype != FS_BSDFFS) - continue; - goto found; - } - } - printf("no suitable root\n"); - asm("or r9,r0,0x0063"); - asm("tb0 0,r0,0x1f0"); - /*NOTREACHED*/ -found: - - gc->gc_root = MAKEDISKDEV(major(gc->gc_root), unit, 0); - rootdev = gc->gc_root; - -justdoswap: - swdevt[0].sw_dev = MAKEDISKDEV(major(rootdev), - DISKUNIT(rootdev), 1); - /* - swdevt[0].sw_dev = dumpdev = MAKEDISKDEV(major(rootdev), - DISKUNIT(rootdev), 1); - */ - /* swap size and dumplo set during autoconfigure */ - if (swaponroot) - rootdev = swdevt[0].sw_dev; -} - -gets(cp) - char *cp; -{ - register char *lp; - register c; - - lp = cp; - for (;;) { - cnputc(c = cngetc()); - switch (c) { - case '\n': - case '\r': - *lp = 0; - return; - case '\b': - case '\177': - if (lp > cp) { - lp--; - cnputc(' '); - cnputc('\b'); - } - continue; - case '#': - lp--; - if (lp < cp) - lp = cp; - continue; - case '@': - case 'u'&037: - lp = cp; - cnputc('\n'); - continue; - default: - *lp++ = c; - } - } -} diff --git a/sys/arch/mvme88k/mvme88k/syscall.stub b/sys/arch/mvme88k/mvme88k/syscall.stub deleted file mode 100644 index 4a1055556d1..00000000000 --- a/sys/arch/mvme88k/mvme88k/syscall.stub +++ /dev/null @@ -1,29 +0,0 @@ - /* - * system call will look like: - * ld r10, r31, 32; r10,r11,r12 might be garbage. - * ld r11, r31, 36 - * ld r12, r31, 40 - * or r13, r0, <code> - * tb0 0, r0, <128> <- xip - * br err <- nip - * jmp r1 <- fip - * err: or.u r3, r0, hi16(errno) - * st r2, r3, lo16(errno) - * subu r2, r0, 1 - * jmp r1 - * - * So, when we take syscall trap, sxip/snip/sfip will be as - * shown above. - * Given this, - * 1. If the system call returned 0, need to skip nip. - * nip = fip, fip += 4 - * (doesn't matter what fip + 4 will be but we will never - * execute this since jmp r1 at nip will change the execution flow.) - * 2. If the system call returned an errno > 0, plug the value - * in r2, and leave nip and fip unchanged. This will have us - * executing "br err" on return to user space. - * 3. If the system call code returned ERESTART or EJUSTRETURN, - * we need to rexecute the trap instruction. Back up the pipe - * line. - * fip = nip, nip = xip - */ diff --git a/sys/arch/mvme88k/mvme88k/timerreg.h b/sys/arch/mvme88k/mvme88k/timerreg.h deleted file mode 100644 index 3bafa844c02..00000000000 --- a/sys/arch/mvme88k/mvme88k/timerreg.h +++ /dev/null @@ -1,8 +0,0 @@ -struct ticktimer { - u_int ttcmpreg; /* Timer compare register */ - u_int ttcounter; /* Timer counter */ - u_int tticr; /* Timer control register */ -}; - -struct timers { -}; diff --git a/sys/arch/mvme88k/mvme88k/trap.c b/sys/arch/mvme88k/mvme88k/trap.c deleted file mode 100644 index d399c351661..00000000000 --- a/sys/arch/mvme88k/mvme88k/trap.c +++ /dev/null @@ -1,608 +0,0 @@ -/* - * Mach Operating System - * Copyright (c) 1993-1991 Carnegie Mellon University - * Copyright (c) 1991 OMRON Corporation - * All Rights Reserved. - * - * Permission to use, copy, modify and distribute this software and its - * documentation is hereby granted, provided that both the copyright - * notice and this permission notice appear in all copies of the - * software, derivative works or modified versions, and any portions - * thereof, and that both notices appear in supporting documentation. - * - * CARNEGIE MELLON AND OMRON ALLOW FREE USE OF THIS SOFTWARE IN ITS "AS IS" - * CONDITION. CARNEGIE MELLON AND OMRON DISCLAIM ANY LIABILITY OF ANY KIND - * FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. - * - * Carnegie Mellon requests users of this software to return to - * - * Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU - * School of Computer Science - * Carnegie Mellon University - * Pittsburgh PA 15213-3890 - * - * any improvements or extensions that they make and grant Carnegie the - * rights to redistribute these changes. - */ - -#include <sys/types.h> -#include <vm/vm.h> -#include <vm/vm_kern.h> /* kernel_map */ - -#include <sys/param.h> -#include <sys/proc.h> -#include <sys/user.h> -#include <sys/syscall.h> -#include <sys/ktrace.h> -#include <machine/cpu.h> /* DMT_VALID, etc. */ -#include <machine/m88100.h> /* DMT_VALID, etc. */ -#include <machine/trap.h> -#include <machine/psl.h> /* FIP_E, etc. */ - -#include <sys/systm.h> - -#if (DDB) -#include <machine/db_machdep.h> -#endif /* DDB */ - -int stop_on_user_memory_error = 0; - -#define TRAPTRACE -#if defined(TRAPTRACE) -unsigned traptrace = 0; -#endif - -#if DDB -#define DEBUG_MSG db_printf -#else -#define DEBUG_MSG printf -#endif /* DDB */ - -#ifdef JEFF_DEBUG -# undef DEBUG_MSG -# define DEBUG_MSG raw_printf -#endif - -#define USERMODE(PSR) (((struct psr*)&(PSR))->psr_mode == 0) -#define SYSTEMMODE(PSR) (((struct psr*)&(PSR))->psr_mode != 0) - -/* XXX MAJOR CLEANUP REQUIRED TO PORT TO BSD */ - -char *trap_type[] = { - "Reset", - "Interrupt Exception", - "Instruction Access", - "Data Access Exception", - "Misaligned Access", - "Unimplemented Opcode", - "Privileg Violation", - "Bounds Check Violation", - "Illegal Integer Divide", - "Integer Overflow", - "Error Exception", -}; - -int trap_types = sizeof trap_type / sizeof trap_type[0]; - -static inline void -userret(struct proc *p, struct m88100_saved_state *frame, u_quad_t oticks) -{ - int sig; - - /* take pending signals */ - while ((sig = CURSIG(p)) != 0) - postsig(sig); - p->p_priority = p->p_usrpri; - - if (want_ast) { - want_ast = 0; - if (p->p_flag & P_OWEUPC) { - p->p_flag &= ~P_OWEUPC; - ADDUPROF(p); - } - } - - if (want_resched) { - /* - * Since we are curproc, clock will normally just change - * our priority without moving us from one queue to another - * (since the running process is not on a queue.) - * If that happened after we put ourselves on the run queue - * but before we switched, we might not be on the queue - * indicated by our priority. - */ - (void) splstatclock(); - setrunqueue(p); - p->p_stats->p_ru.ru_nivcsw++; - mi_switch(); - (void) spl0(); - while ((sig = CURSIG(p)) != 0) - postsig(sig); - } - - /* - * If profiling, charge recent system time to the trapped pc. - */ - if (p->p_flag & P_PROFIL) - addupc_task(p, frame->sxip & ~3, - (int)(p->p_sticks - oticks)); - - curpriority = p->p_priority; -} - -void -panictrap(int type, struct m88100_saved_state *frame) -{ - static int panicing = 0; - if (panicing++ == 0) { - printf("trap type %d, v = %x, frame %x\n", type, frame->sxip & ~3, frame); - regdump(frame); - } - if ((u_int)type < trap_types) - panic(trap_type[type]); - panic("trap"); - /*NOTREACHED*/ -} - -/*ARGSUSED*/ -void -trap(unsigned type, struct m88100_saved_state *frame) -{ - struct proc *p; - u_quad_t sticks = 0; - vm_map_t map; - vm_offset_t va; - vm_prot_t ftype; - unsigned nss, fault_addr; - struct vmspace *vm; - int result; - int sig = 0; - - extern vm_map_t kernel_map; - extern int fubail(), subail(); - - cnt.v_trap++; - if ((p = curproc) == NULL) - p = &proc0; - - if (USERMODE(frame->epsr)) { - sticks = p->p_sticks; - type += T_USER; - p->p_md.md_tf = frame; /* for ptrace/signals */ - } - - switch(type) - { - default: - panictrap(frame->vector, frame); - /*NOTREACHED*/ - -#if defined(DDB) - case T_KDB_BREAK: - /*FALLTHRU*/ - case T_KDB_BREAK+T_USER: - { - int s = db_splhigh(); - db_enable_interrupt(); /* turn interrupts on */ - ddb_break_trap(T_KDB_BREAK,(db_regs_t*)frame); - db_disable_interrupt(); /* shut them back off */ - db_splx(s); - return; - } - case T_KDB_ENTRY: - /*FALLTHRU*/ - case T_KDB_ENTRY+T_USER: - { - int s = db_splhigh(); - db_enable_interrupt(); /* turn interrupts on */ - ddb_entry_trap(T_KDB_ENTRY,(db_regs_t*)frame); - db_disable_interrupt(); /* shut them back off */ - db_splx(s); - return; - } - -#if 0 - case T_ILLFLT: - { - int s = db_splhigh(); - db_enable_interrupt(); /* turn interrupts on */ - ddb_error_trap(type == T_ILLFLT ? "unimplemented opcode" : - "error fault", (db_regs_t*)frame); - db_disable_interrupt(); /* shut them back off */ - db_splx(s); - return; - } -#endif /* 0 */ -#endif /* DDB */ - - case T_MISALGNFLT: - DEBUG_MSG("kernel misalgined " - "access exception @ 0x%08x\n", frame->sxip); - panictrap(frame->vector, frame); - break; - - case T_INSTFLT: - /* kernel mode instruction access fault */ - /* XXX I think this should be illegal, but not sure. Will leave - * the way it is for now. Should never,never happen for a non-paged - * kernel - */ - /*FALLTHRU*/ - case T_DATAFLT: - /* kernel mode data fault */ - /* - * if the faulting address is in user space, handle it in - * the context of the user process. Else, use kernel map. - */ - - if (type == T_DATAFLT) { - fault_addr = frame->dma0; - if (frame->dmt0 & (DMT_WRITE|DMT_LOCKBAR)) - ftype = VM_PROT_READ|VM_PROT_WRITE; - else - ftype = VM_PROT_READ; - } else { - fault_addr = frame->sxip & XIP_ADDR; - ftype = VM_PROT_READ; - } - - va = trunc_page((vm_offset_t)fault_addr); - - vm = p->p_vmspace; - map = &vm->vm_map; - - /* if instruction fault or data fault on a kernel address... */ - if ((type == T_INSTFLT) || (frame->dmt0 & DMT_DAS)) - map = kernel_map; - - /* - * We don't want to call vm_fault() if it is fuwintr() or - * suwintr(). These routines are for copying from interrupt - * context and vm_fault() can potentially sleep. - */ - - if (p->p_addr->u_pcb.pcb_onfault == (int)fubail || - p->p_addr->u_pcb.pcb_onfault == (int)subail) - goto outtahere; - - result = vm_fault(map, va, ftype, FALSE); - - if (result == KERN_SUCCESS) { - /* - * We could resolve the fault. Call data_access_emulation - * to drain the data unit pipe line and reset dmt0 so that - * trap won't get called again. For inst faults, back up - * the pipe line. - */ - if (type == T_DATAFLT) { - data_access_emulation(frame); - frame->dmt0 = 0; - } else { - frame->sfip = frame->snip & ~FIP_E; - frame->snip = frame->sxip & ~NIP_E; - } - return; - } - - /* XXX Is this right? */ - if (type == T_DATAFLT && (frame->dmt0 & DMT_DAS) == 0) - goto user_fault; - - /* - * if still the fault is not resolved ... - */ - if (!p->p_addr->u_pcb.pcb_onfault) - panictrap(frame->vector, frame); - - outtahere: - frame->snip = ((unsigned)p->p_addr->u_pcb.pcb_onfault ) | FIP_V; - frame->sfip = ((unsigned)p->p_addr->u_pcb.pcb_onfault + 4) | FIP_V; - frame->sxip = 0; - frame->dmt0 = 0; /* XXX what about other trans. in data unit */ - return; - - case T_INSTFLT+T_USER: - /* User mode instruction access fault */ - /*FALLTHRU*/ - case T_DATAFLT+T_USER: - user_fault: - sig = SIGILL; - if (type == T_INSTFLT+T_USER) - fault_addr = frame->sxip & XIP_ADDR; - else - fault_addr = frame->dma0; - if (frame->dmt0 & (DMT_WRITE|DMT_LOCKBAR)) - ftype = VM_PROT_READ|VM_PROT_WRITE; - else - ftype = VM_PROT_READ; - - va = trunc_page((vm_offset_t)fault_addr); - - vm = p->p_vmspace; - map = &vm->vm_map; - - result = vm_fault(map, va, ftype, FALSE); - - if ((caddr_t)va >= vm->vm_maxsaddr) { - if (result == KERN_SUCCESS) { - nss = clrnd(USRSTACK - va);/* XXX check this */ - if (nss > vm->vm_ssize) - vm->vm_ssize = nss; - } else if (result == KERN_PROTECTION_FAILURE) - result = KERN_INVALID_ADDRESS; - } - - if (result == KERN_SUCCESS) { - if (type == T_DATAFLT+T_USER) { - /* - * We could resolve the fault. Call - * data_access_emulation to drain the data unit - * pipe line and reset dmt0 so that trap won't - * get called again. - */ - data_access_emulation(frame); - frame->dmt0 = 0; - } else { - /* back up SXIP, SNIP clearing the the Error bit */ - frame->sfip = frame->snip & ~FIP_E; - frame->snip = frame->sxip & ~NIP_E; - } - } else { - sig = result == SIGSEGV; - } - - break; - - case T_MISALGNFLT+T_USER: - sig = SIGBUS; - break; - - case T_PRIVINFLT+T_USER: - case T_ILLFLT+T_USER: - sig = SIGILL; - break; - - case T_BNDFLT+T_USER: - case T_ZERODIV+T_USER: - case T_OVFFLT+T_USER: - sig = SIGBUS; - break; - - case T_FPEPFLT+T_USER: - case T_FPEIFLT+T_USER: - sig = SIGFPE; - break; - - case T_ASTFLT+T_USER: - want_ast = 0; - (void) spl0(); - if (ssir & SIR_NET) { - siroff(SIR_NET); - cnt.v_soft++; - netintr(); - } - if (ssir & SIR_CLOCK) { - siroff(SIR_CLOCK); - cnt.v_soft++; - /* XXXX softclock(&frame.f_stackadj); */ - softclock(); - } - if (p->p_flag & P_OWEUPC) { - p->p_flag &= ~P_OWEUPC; - ADDUPROF(p); - } - break; - - case T_SIGTRAP+T_USER: - break; - - case T_STEPBPT+T_USER: - /* - * This trap is used by the kernel to support single-step - * debugging (although any user could generate this trap - * which should probably be handled differently). When a - * process is continued by a debugger with the PT_STEP - * function of ptrace (single step), the kernel inserts - * one or two breakpoints in the user process so that only - * one instruction (or two in the case of a delayed branch) - * is executed. When this breakpoint is hit, we get the - * T_STEPBPT trap. - */ - frame->sfip = frame->snip; /* set up next FIP */ - frame->snip = frame->sxip; /* set up next NIP */ - break; - - case T_USERBPT+T_USER: - /* - * This trap is meant to be used by debuggers to implement - * breakpoint debugging. When we get this trap, we just - * return a signal which gets caught by the debugger. - */ - - frame->sfip = frame->snip; /* set up the next FIP */ - frame->snip = frame->sxip; /* set up the next NIP */ - break; - - } - - /* - * If trap from supervisor mode, just return - */ - if (SYSTEMMODE(frame->epsr)) - return; - - if (sig) { - trapsignal(p, sig, frame->vector); - /* - * don't want multiple faults - we are going to - * deliver signal. - */ - frame->dmt0 = 0; - } - - userret(p, frame, sticks); -} - -void error_fault(struct m88100_saved_state *frame) -{ - DEBUG_MSG("\n[ERROR FAULT (Bad News[tm]) frame 0x%08x]\n", frame); -#if DDB - gimmeabreak(); - DEBUG_MSG("[you really can't restart after an error fault.]\n"); - gimmeabreak(); -#endif /* DDB */ -} - -syscall(u_int code, struct m88100_saved_state *tf) -{ - register int i, nsys, *ap, nap; - register struct sysent *callp; - register struct proc *p; - int error, new; - struct args { - int i[8]; - } args; - int rval[2]; - u_quad_t sticks; - extern struct pcb *curpcb; - - cnt.v_syscall++; - - callp = p->p_emul->e_sysent; - nsys = p->p_emul->e_nsysent; - - p = curproc; -#ifdef DIAGNOSTIC - if (USERMODE(tf->epsr) == 0) - panic("syscall"); - if (curpcb != &p->p_addr->u_pcb) - panic("syscall curpcb/ppcb"); - if (tf != (struct trapframe *)((caddr_t)curpcb)) - panic("syscall trapframe"); -#endif - - sticks = p->p_sticks; - p->p_md.md_tf = tf; - - /* - * For 88k, all the arguments are passed in the registers (r2-r12) - * For syscall (and __syscall), r2 (and r3) has the actual code. - * __syscall takes a quad syscall number, so that other - * arguments are at their natural alignments. - */ - ap = &tf->r[2]; - nap = 6; - - switch (code) { - case SYS_syscall: - code = *ap++; - nap--; - break; - case SYS___syscall: - if (callp != sysent) - break; - code = ap[_QUAD_LOWWORD]; - ap += 2; - nap -= 2; - break; - } - - /* Callp currently points to syscall, which returns ENOSYS. */ - - if (code < 0 || code >= nsys) - callp += p->p_emul->e_nosys; - else { - callp += code; - i = callp->sy_narg; - if (i > 8) - panic("syscall nargs"); - /* - * just copy them; syscall stub made sure all the - * args are moved from user stack to registers. - */ - bcopy((caddr_t)ap, (caddr_t)args.i, i * 4); - } -#ifdef KTRACE - if (KTRPOINT(p, KTR_SYSCALL)) - ktrsyscall(p->p_tracep, code, callp->sy_narg, args.i); -#endif - rval[0] = 0; - rval[1] = 0; /* doesn't seem to be used any where */ - error = (*callp->sy_call)(p, &args, rval); - /* - * system call will look like: - * ld r10, r31, 32; r10,r11,r12 might be garbage. - * ld r11, r31, 36 - * ld r12, r31, 40 - * or r13, r0, <code> - * tb0 0, r0, <128> <- xip - * br err <- nip - * jmp r1 <- fip - * err: or.u r3, r0, hi16(errno) - * st r2, r3, lo16(errno) - * subu r2, r0, 1 - * jmp r1 - * - * So, when we take syscall trap, sxip/snip/sfip will be as - * shown above. - * Given this, - * 1. If the system call returned 0, need to skip nip. - * nip = fip, fip += 4 - * (doesn't matter what fip + 4 will be but we will never - * execute this since jmp r1 at nip will change the execution flow.) - * 2. If the system call returned an errno > 0, plug the value - * in r2, and leave nip and fip unchanged. This will have us - * executing "br err" on return to user space. - * 3. If the system call code returned ERESTART or EJUSTRETURN, - * we need to rexecute the trap instruction. Back up the pipe - * line. - * fip = nip, nip = xip - */ - - if (error == 0) { - /* - * If fork succeeded and we are the child, our stack - * has moved and the pointer tf is no longer valid, - * and p is wrong. Compute the new trapframe pointer. - * (The trap frame invariably resides at the - * tippity-top of the u. area.) - */ - p = curproc; - tf = USER_REGS(p); - tf->r[2] = 0; - tf->epsr &= ~PSR_C; - tf->snip = tf->sfip & ~3; - tf->sfip = tf->snip + 4; - } else if (error > 0 /*error != ERESTART && error != EJUSTRETURN*/) { -bad: - tf->r[2] = error; - tf->epsr |= PSR_C; /* fail */ - tf->snip = tf->snip & ~3; - tf->sfip = tf->sfip & ~3; - } else { - /* if (error == ERESTART || error == EJUSTRETURN) - back up the pipe line */ - tf->sfip = tf->snip & ~3; - tf->snip = tf->sxip & ~3; - } - userret(p, tf, sticks); -#ifdef KTRACE - if (KTRPOINT(p, KTR_SYSRET)) - ktrsysret(p->p_tracep, code, error, rval[0]); -#endif -} - -#if MACH_PCSAMPLE > 0 -#include "mach_pcsample.h" -/* - * return saved state for interrupted user thread - */ -unsigned interrupted_pc(p) -proc *p; -{ - struct m88100_saved_state *frame = &p->pcb->user_state; - unsigned sxip = frame->sxip; - unsigned PC = sxip & ~3; /* clear lower bits which are flags... */ - return PC; -} -#endif /* MACH_PCSAMPLE > 0*/ diff --git a/sys/arch/mvme88k/mvme88k/vm_machdep.c b/sys/arch/mvme88k/mvme88k/vm_machdep.c deleted file mode 100644 index e15bdb7c2b5..00000000000 --- a/sys/arch/mvme88k/mvme88k/vm_machdep.c +++ /dev/null @@ -1,289 +0,0 @@ -/* - * Copyright (c) 1993 Adam Glass - * Copyright (c) 1988 University of Utah. - * Copyright (c) 1982, 1986, 1990 The Regents of the University of California. - * All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * the Systems Programming Group of the University of Utah Computer - * Science Department. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * from: Utah $Hdr: vm_machdep.c 1.21 91/04/06$ - * from: @(#)vm_machdep.c 7.10 (Berkeley) 5/7/91 - * vm_machdep.c,v 1.3 1993/07/07 07:09:32 cgd Exp - * $Id: vm_machdep.c,v 1.1 1995/10/18 12:32:35 deraadt Exp $ - */ - -#include <sys/param.h> -#include <sys/systm.h> -#include <sys/proc.h> -#include <sys/malloc.h> -#include <sys/buf.h> -#include <sys/user.h> -#include <sys/vnode.h> - -#include <vm/vm.h> -#include <vm/vm_kern.h> -#include <vm/vm_map.h> - -#include <machine/cpu.h> - -/* - * Finish a fork operation, with process p2 nearly set up. - * Copy and update the kernel stack and pcb, making the child - * ready to run, and marking it so that it can return differently - * than the parent. Returns 1 in the child process, 0 in the parent. - * We currently double-map the user area so that the stack is at the same - * address in each process; in the future we will probably relocate - * the frame pointers on the stack after copying. - */ -cpu_fork(struct proc *p1, struct proc *p2) -{ - register struct user *up = p2->p_addr; - int off, ssz; - caddr_t sp; - extern caddr_t getsp(); - extern char kstack[]; - - p2->p_md.md_tf = p1->p_md.md_tf; - - /* - * Copy pcb and stack from proc p1 to p2. - * We do this as cheaply as possible, copying only the active - * part of the stack. The stack and pcb need to agree; - * this is tricky, as the final pcb is constructed by savectx, - * but its frame isn't yet on the stack when the stack is copied. - * cpu_switch compensates for this when the child eventually runs. - * This should be done differently, with a single call - * that copies and updates the pcb+stack, - * replacing the bcopy and savectx. - */ - p2->p_addr->u_pcb = p1->p_addr->u_pcb; - sp = getsp(); - ssz = (unsigned int)UADDR + UPAGES * NBPG - (unsigned int)sp; - off = (unsigned int)sp - (unsigned int)UADDR; -#if 0 - bcopy((caddr_t)(UADDR + off), (caddr_t)((unsigned int)p2->p_addr + off), - ssz); -#endif /* 0 */ - /* copy from UADDR to p2 */ - memcpy((caddr_t)((unsigned int)p2->p_addr + off), - (caddr_t)(UADDR + off), ssz); - save_u_area(p2, p2->p_addr); - PMAP_ACTIVATE(&p2->p_vmspace->vm_pmap, &up->u_pcb, 0); - - /* - * Arrange for a non-local goto when the new process - * is started, to resume here, returning nonzero from setjmp. - */ - if (savectx(up, 1)) { - /* - * Return 1 in child. - */ - return (1); - } - return (0); -} - -/* - * cpu_exit is called as the last action during exit. - * We release the address space and machine-dependent resources, - * including the memory for the user structure and kernel stack. - * Once finished, we call switch_exit, which switches to a temporary - * pcb and stack and never returns. We block memory allocation - * until switch_exit has made things safe again. - */ -volatile void -cpu_exit(struct proc *p) -{ - extern volatile void switch_exit(); - vmspace_free(p->p_vmspace); - - (void) splimp(); - kmem_free(kernel_map, (vm_offset_t)p->p_addr, ctob(UPAGES)); - switch_exit(p); - /* NOTREACHED */ -} - -int -cpu_coredump(struct proc *p, struct vnode *vp, struct ucred *cred) -{ - - return (vn_rdwr(UIO_WRITE, vp, (caddr_t) p->p_addr, ctob(UPAGES), - (off_t)0, UIO_SYSSPACE, IO_NODELOCKED|IO_UNIT, cred, (int *)NULL, - p)); -} - -/* - * Finish a swapin operation. - * We neded to update the cached PTEs for the user area in the - * machine dependent part of the proc structure. - */ - -void -cpu_swapin(struct proc *p) -{ - save_u_area(p, (vm_offset_t)p->p_addr); -} - -extern vm_map_t phys_map; - -/* - * Map an IO request into kernel virtual address space. Requests fall into - * one of five catagories: - * - * B_PHYS|B_UAREA: User u-area swap. - * Address is relative to start of u-area (p_addr). - * B_PHYS|B_PAGET: User page table swap. - * Address is a kernel VA in usrpt (Usrptmap). - * B_PHYS|B_DIRTY: Dirty page push. - * Address is a VA in proc2's address space. - * B_PHYS|B_PGIN: Kernel pagein of user pages. - * Address is VA in user's address space. - * B_PHYS: User "raw" IO request. - * Address is VA in user's address space. - * - * All requests are (re)mapped into kernel VA space via the useriomap - * (a name with only slightly more meaning than "kernelmap") - * - * XXX we allocate KVA space by using kmem_alloc_wait which we know - * allocates space without backing physical memory. This implementation - * is a total crock, the multiple mappings of these physical pages should - * be reflected in the higher-level VM structures to avoid problems. - */ -void -vmapbuf(struct buf *bp) -{ - register int npf; - register caddr_t addr; - register long flags = bp->b_flags; - struct proc *p; - int off; - vm_offset_t kva; - register vm_offset_t pa; - - if ((flags & B_PHYS) == 0) - panic("vmapbuf"); - addr = bp->b_saveaddr = bp->b_data; - off = (int)addr & PGOFSET; - p = bp->b_proc; - npf = btoc(round_page(bp->b_bcount + off)); - - /* - * Why phys_map? kernelmap should be OK - after all, the - * we are mapping user va to kernel va or remapping some - * kernel va to another kernel va. XXX -nivas - */ - - kva = kmem_alloc_wait(phys_map, ctob(npf)); - bp->b_data = (caddr_t) (kva + off); - while (npf--) { - pa = pmap_extract(vm_map_pmap(&p->p_vmspace->vm_map), - (vm_offset_t)addr); - if (pa == 0) - panic("vmapbuf: null page frame"); - pmap_enter(vm_map_pmap(phys_map), kva, trunc_page(pa), - VM_PROT_READ|VM_PROT_WRITE, TRUE); - addr += PAGE_SIZE; - kva += PAGE_SIZE; - } -} - -/* - * Free the io map PTEs associated with this IO operation. - * We also invalidate the TLB entries and restore the original b_addr. - */ -void -vunmapbuf(struct buf *bp) -{ - register caddr_t addr; - register int npf; - vm_offset_t kva; - - if ((bp->b_flags & B_PHYS) == 0) - panic("vunmapbuf"); - addr = bp->b_data; - npf = btoc(round_page(bp->b_bcount + ((int)addr & PGOFSET))); - kva = (vm_offset_t)((int)addr & ~PGOFSET); - kmem_free_wakeup(phys_map, kva, ctob(npf)); - bp->b_data = bp->b_saveaddr; - bp->b_saveaddr = NULL; -} - -caddr_t -obio_vm_alloc(int npages) -{ - vm_size_t size; - vm_offset_t addr; - int result; - - if (npages == 0); - size = npages*NBPG; - addr = vm_map_min(phys_map); - result = vm_map_find(phys_map, NULL, (vm_offset_t) 0, &addr, size, TRUE); - if (result != KERN_SUCCESS) return NULL; - vm_map_lock(phys_map); - vm_map_delete(phys_map, addr, addr+size); - vm_map_unlock(phys_map); - return (caddr_t) addr; -} - -/* - * Move pages from one kernel virtual address to another. - * Both addresses are assumed to reside in the Sysmap, - * and size must be a multiple of CLSIZE. - */ -void -pagemove(caddr_t from, caddr_t to, int size) -{ - register vm_offset_t pa; - -#ifdef DEBUG - if (size & CLOFSET) - panic("pagemove"); -#endif - while (size > 0) { - pa = pmap_extract(kernel_pmap, (vm_offset_t)from); -#ifdef DEBUG - if (pa == 0) - panic("pagemove 2"); - if (pmap_extract(kernel_pmap, (vm_offset_t)to) != 0) - panic("pagemove 3"); -#endif - pmap_remove(kernel_pmap, - (vm_offset_t)from, (vm_offset_t)from + NBPG); - pmap_enter(kernel_pmap, - (vm_offset_t)to, pa, VM_PROT_READ|VM_PROT_WRITE, 1); - from += NBPG; - to += NBPG; - size -= NBPG; - } -} diff --git a/sys/arch/mvme88k/stand/Makefile b/sys/arch/mvme88k/stand/Makefile deleted file mode 100644 index 39788d542fb..00000000000 --- a/sys/arch/mvme88k/stand/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -SUBDIRS = libbug kerncrt boot bugexec -SUBDIR = libbug kerncrt boot bugexec - -.include <bsd.prog.mk> diff --git a/sys/arch/mvme88k/stand/boot/Makefile b/sys/arch/mvme88k/stand/boot/Makefile deleted file mode 100644 index df343d81f70..00000000000 --- a/sys/arch/mvme88k/stand/boot/Makefile +++ /dev/null @@ -1,30 +0,0 @@ -all: boot boot.out -CFLAGS+=-fwritable-strings -I${.CURDIR}/../include -CFLAGS+=-I${.CURDIR}/../.. -I${.CURDIR}/../../machine -CFLAGS+=-I/usr/src/sys -LDFLAGS+= -L ${.CURDIR}/../libbug -L/usr/local/lib -BOOT=FC0000 -#BOOT=1000000 - -LIBBUG!= cd $(.CURDIR)/../libbug; \ - printf "xxx:\n\techo \$${.OBJDIR}/libbug.a\n" | ${MAKE} -r -s -f - xxx - -LDADD+=${LIBBUG} #/usr/local/lib/libgcc.a -SRCS+=bugcrt.c bugio.c main.c - -.PATH: ${.CURDIR}/../bugcrt ${.CURDIR}/../libbug ${.CURDIR}/../../../../lib/libc_sa ${.CURDIR}/${MACHINE_ARCH} - -boot: bugcrt.o main.o bcopy.o memset.o printf.o ${LIBBUG} -# ld -o {.TARGET} -x -n -Ttext ${BOOT} bugcrt.o bugio.o main.o bcopy.o memset.o printf.o /usr/local/lib/libgcc.a - ld -o ${.TARGET} -x -N -Ttext ${BOOT} ${.ALLSRC} ${LDADD} - -boot.out: - ${.CURDIR}/wrtvid ${.OBJDIR}/boot && mv ${.OBJDIR}/boot.? ${.CURDIR} - -#main.o: main.c -# ${CC} ${CFLAGS} -c -O ${.ALLSRC} -# ${LD} -x -r ${.TARGET} -# ${LD} -x ${.TARGET} -# mv a.out ${.TARGET} - -.include <bsd.prog.mk> diff --git a/sys/arch/mvme88k/stand/boot/boot.1 b/sys/arch/mvme88k/stand/boot/boot.1 Binary files differdeleted file mode 100644 index 03aa7928309..00000000000 --- a/sys/arch/mvme88k/stand/boot/boot.1 +++ /dev/null diff --git a/sys/arch/mvme88k/stand/boot/boot.2 b/sys/arch/mvme88k/stand/boot/boot.2 Binary files differdeleted file mode 100644 index f1ebc35b445..00000000000 --- a/sys/arch/mvme88k/stand/boot/boot.2 +++ /dev/null diff --git a/sys/arch/mvme88k/stand/boot/foo b/sys/arch/mvme88k/stand/boot/foo Binary files differdeleted file mode 100644 index 53aac89a35e..00000000000 --- a/sys/arch/mvme88k/stand/boot/foo +++ /dev/null diff --git a/sys/arch/mvme88k/stand/boot/foo.1 b/sys/arch/mvme88k/stand/boot/foo.1 Binary files differdeleted file mode 100644 index 53aac89a35e..00000000000 --- a/sys/arch/mvme88k/stand/boot/foo.1 +++ /dev/null diff --git a/sys/arch/mvme88k/stand/boot/foo.2 b/sys/arch/mvme88k/stand/boot/foo.2 Binary files differdeleted file mode 100644 index dcef04fabfb..00000000000 --- a/sys/arch/mvme88k/stand/boot/foo.2 +++ /dev/null diff --git a/sys/arch/mvme88k/stand/boot/main.c b/sys/arch/mvme88k/stand/boot/main.c deleted file mode 100644 index 0759c9f2644..00000000000 --- a/sys/arch/mvme88k/stand/boot/main.c +++ /dev/null @@ -1,264 +0,0 @@ -#include <sys/param.h> -#include <sys/reboot.h> -#include "bug.h" -#include "bugio.h" -#include "machine/exec.h" - -int readblk __P((int, char *)); -int loados __P((void)); -void putchar __P((char)); -void _main __P((void)); -void tapefileseek __P((int)); - -char Clun, Dlun; - -#define DEV_BSIZE 512 -#define KERNEL_LOAD_ADDR 0x10000 -#if !defined(BUG_BLKSIZE) -#define BUG_BLKSIZE 256 -#endif /* BUG_BLKSIZE */ -#define sec2blk(x) ((x) * (DEV_BSIZE/BUG_BLKSIZE)) - -struct kernel { - void *entry; - void *symtab; - void *esym; - int bflags; - int bdev; - char *kname; - void *smini; - void *emini; - unsigned int end_loaded; -} kernel; - -int howto = 0; -int bootdev = 0; -int *miniroot; - -void -putchar(char c) -{ - bugoutchr(c); -} - -main(struct bugenv *env) -{ - printf("Clun %x Dlun %x\n", env->clun, env->dlun); - Clun = (char)env->clun; - Dlun = (char)env->dlun; - loados(); - return; -} - - -loados(void) -{ - int i, size; - register char *loadaddr = (char *)KERNEL_LOAD_ADDR; /* load addr 64k*/ - struct exec *hdr; - int (*fptr)(); - int *esym; - int cnt, strtablen, ret; - char *addr; - - howto |= RB_SINGLE|RB_KDB; - - tapefileseek(2); /* seek to file 2 - the OS */ - if (readblk(1, loadaddr) == -1) { - printf("Unable to read blk 0\n"); - return 1; - } - hdr = (struct exec *)loadaddr; - - /* We only deal with ZMAGIC files */ - if ((int)hdr->a_entry != (int)(loadaddr + sizeof(struct exec))) { - printf("a_entry != loadaddr + exec size\n"); - } - size = hdr->a_text + hdr->a_data; - size -= DEV_BSIZE; /* account for the block already read */ - - printf("Loading [%x+%x", hdr->a_text, hdr->a_data); - if (readblk(size / DEV_BSIZE, loadaddr + DEV_BSIZE) == -1) { - printf("Error reading the OS\n"); - return 1; - } - - /* zero out BSS */ - - printf("+%x]", hdr->a_bss); -#if DEBUG - printf("zero'd out %x (%x)\n", loadaddr + hdr->a_text + hdr->a_data, - hdr->a_bss); -#endif - memset(loadaddr + hdr->a_text + hdr->a_data, 0, hdr->a_bss); - - addr = loadaddr + hdr->a_text + hdr->a_data + hdr->a_bss; - - if (hdr->a_syms != 0 /* && !(kernel.bflags & RB_NOSYM)*/) { - /* - * DDB expects the following layout: - * no. of syms - * symbols - * size of strtab - * entries of strtab - * esym->... - * Where as size of strtab is part of strtab, we need - * to prepend the size of symtab to satisfy ddb. - * esym is expected to point past the last byte of - * string table, rouded up to an int. - */ - bcopy(&hdr->a_syms, addr, sizeof(hdr->a_syms)); - addr += 4; /* account for a_syms copied above */ - printf (" + [ %x",hdr->a_syms); - - cnt = (hdr->a_syms + DEV_BSIZE - 1) & ~(DEV_BSIZE - 1); - - ret = readblk(cnt / DEV_BSIZE, addr); - if (ret != 0) { - printf("unable to load kernel\n"); - return 1; - } - - esym = (void *) ((int)addr + hdr->a_syms); - - if ((int)addr + cnt <= (int)esym) { - printf("missed loading count of symbols\n\r"); - return 1; - } - - addr += cnt; - - strtablen = *esym; -#if 0 - printf("start load %x end load %x %x\n", addr, - len, addr +len); - printf("esym %x *esym %x\n",esym, len); -#endif - /* - * If symbol table size is not a sector multiple, we - * already read part of the string table. Look at the - * part already read, and figure out the string table - * size. Also, adjust the size yet to read. - */ - if (hdr->a_syms != cnt) { - /* already read part of the string table */ - strtablen -= (cnt - hdr->a_syms); - } - - if (strtablen > 0) { - printf(" + %x",*esym); - - cnt = (strtablen + DEV_BSIZE -1) & ~(DEV_BSIZE - 1); - - ret = readblk(cnt / DEV_BSIZE, addr); - if (ret != 0) { - printf("unable to load kernel\n"); - return 1; - } - addr += strtablen; - printf(" ]\n"); - } else { - printf("+ %x ]\n", *esym); - } - esym = (int *)(((int)esym) + *esym); - esym = (int *)(((int)esym + 4 - 1) & ~3); - - kernel.symtab = (void *)hdr->a_syms; - kernel.esym = esym; - } else { - kernel.symtab = 0; - kernel.esym = 0; - } - - kernel.end_loaded = (unsigned int)addr; - miniroot = (int *)esym; - miniroot = (int *)(((int)miniroot + 0x1000 - 1) & ~0xFFF); - tapefileseek(3); /* seek to file 3 - minroot */ - if (readblk(1000, miniroot) != 0) { - printf("miniroot not loaded\n"); - addr = (char *)miniroot; - } else { - addr = (char *)((int)miniroot + 1000 * DEV_BSIZE); - } - printf("esym %x miniroot @ %x (ends @ %x)\n", esym, miniroot, addr); -#if 0 - { - char *symaddr = (char *)0x01F00000; - int i; - - tapefileseek(4); /* seek to file 4 - syms */ - readblk(1, symaddr); - i = *symaddr; - i = (i * 0x1C + 4 + DEV_BSIZE) & ~(DEV_BSIZE - 1); - printf("loading %d symbols (%d sectors)\n", - *symaddr, (i + 1) * DEV_BSIZE); - readblk(i / DEV_BSIZE, symaddr + DEV_BSIZE); - readblk(100, 0x01F00000); - } -#endif - - fptr = (int (*)())hdr->a_entry; - /* - * Args are passed as - * r2 howto - * r3 end addr - * r4 (Clun << 8) | Dlun & FF - * r5 esym - * r6 miniroot - */ - bootdev = ((Clun << 8) & 0xFF00 | Dlun & 0xFF) & 0xFFFF; -#if 0 - asm volatile ("or r2, r0, %0\n\tor r3, r0, %1\n\tor r4, r0, %2\n\tor r5, r0, %3\n\tor r6, r0, %4\n\tor r7, r0, %5" - : /* no outputs */ - : "r" (howto), "r" (addr), "r" (Clun), "r" (Dlun), "r" (esym), "r" (miniroot) - : "r2", "r3", "r4", "r5", "r6", "r7"); -#endif /* 0 */ - (*fptr)(howto, addr, bootdev, esym, miniroot); - return 0; -} - -int -readblk(int n, char *addr) -{ - struct bugdisk_io io; - - io.clun = Clun; - io.dlun = Dlun; - io.status = 0; - io.addr = (void *)addr; - io.fileno = 0; /* for tape reads, start io at current pos */ - io.nblks = sec2blk(n); - io.flag = IGNOREFILENO; - io.am = 0; - bugdskrd(&io); - if (io.status) - return -1; - return 0; -} - -void -_main(void) -{ - return; -} - -void -tapefileseek(int i) -{ - struct bugdisk_io io; - void *addr = (void *)KERNEL_LOAD_ADDR; /* some number - don't care */ - - io.clun = Clun; - io.dlun = Dlun; - io.status = 0; - io.addr = addr; - io.fileno = i; /* for tape reads, this is the file no. */ - io.nblks = 0; - io.flag = 0; /* we want to turn off IFN and EOF bits */ - io.am = 0; - bugdskrd(&io); -} - -__main() -{ -} diff --git a/sys/arch/mvme88k/stand/boot/wrtvid b/sys/arch/mvme88k/stand/boot/wrtvid Binary files differdeleted file mode 100644 index 647a59d253f..00000000000 --- a/sys/arch/mvme88k/stand/boot/wrtvid +++ /dev/null diff --git a/sys/arch/mvme88k/stand/boot/wrtvid.c b/sys/arch/mvme88k/stand/boot/wrtvid.c deleted file mode 100644 index 6161ccaa85a..00000000000 --- a/sys/arch/mvme88k/stand/boot/wrtvid.c +++ /dev/null @@ -1,108 +0,0 @@ -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <unistd.h> -#include <stdio.h> -#include "vid.h" - -#define sec2blk(x) ((x) * 2) - -main(int argc, char **argv) -{ - struct vid *pvid; - struct cfg *pcfg; - struct stat stat; - int exe_file; - int tape_vid; - int tape_exe; - unsigned int exe_addr; - unsigned short exe_addr_u; - unsigned short exe_addr_l; - char *filename; - char fileext[256]; - - if (argc == 0){ - filename = "a.out"; - } else { - filename = argv[1]; - } - exe_file = open(filename, O_RDONLY,0444); - if (exe_file == -1) - { - printf("file %s does not exist\n",filename); - exit(2); - } - sprintf (fileext,"%s%s",filename,".1"); - tape_vid = open(fileext, O_WRONLY|O_CREAT|O_TRUNC,0644); - sprintf (fileext,"%s%s",filename,".2"); - tape_exe = open(fileext, O_WRONLY|O_CREAT|O_TRUNC,0644); - - pvid = (struct vid *) malloc(sizeof (struct vid)); - - memset(pvid,0,sizeof(struct vid)); - - strcpy(pvid->vid_id, "NBSD"); - - fstat (exe_file,&stat); - /* size in 512 byte blocks round up after a.out header removed */ - /* Actually, blocks == 256 bytes */ - - pvid->vid_oss = 1; - pvid->vid_osl = (short)sec2blk((stat.st_size - 0x20 + 511) / 512); - - lseek(exe_file,0x14,SEEK_SET); - read(exe_file,&exe_addr,4); - { - union { - struct { - short osa_u; - short osa_l; - } osa_u_l; - int osa; - } u; - u.osa = exe_addr; - pvid->vid_osa_u = u.osa_u_l.osa_u; - pvid->vid_osa_l = u.osa_u_l.osa_l; - } - pvid->vid_cas = 1; - pvid->vid_cal = 1; - /* do not want to write past end of structure, not null terminated */ - strcpy(pvid->vid_mot,"MOTOROL"); - pvid->vid_mot[7] = 'A'; - - write(tape_vid,pvid,sizeof(struct vid)); - - free(pvid); - - pcfg = (struct cfg *) malloc (sizeof(struct cfg)); - - memset(pcfg,0,sizeof(struct cfg)); - - pcfg->cfg_rec = 0x100; - pcfg->cfg_psm = 0x200; - - write(tape_vid,pcfg,sizeof(struct cfg)); - - free(pcfg); - - copy_exe(exe_file,tape_exe); - close (exe_file); - close (tape_vid); - close (tape_exe); -} - -#define BUF_SIZ 512 -copy_exe(exe_file,tape_exe) -{ - char *buf; - int cnt = 0; - - buf = (char *)malloc (BUF_SIZ); - - lseek (exe_file,0x20,SEEK_SET); - while (BUF_SIZ == (cnt = read(exe_file, buf , BUF_SIZ))) { - write (tape_exe,buf,cnt); - } - memset (&buf[cnt],0,BUF_SIZ-cnt); - write (tape_exe,buf,BUF_SIZ); -} diff --git a/sys/arch/mvme88k/stand/bugcrt/Makefile b/sys/arch/mvme88k/stand/bugcrt/Makefile deleted file mode 100644 index 821ec7508d4..00000000000 --- a/sys/arch/mvme88k/stand/bugcrt/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -OBJ=bugcrt.o -CFLAGS+=-I${.CURDIR}/../include -CFLAGS+=-I${.CURDIR}/../.. -CFLAGS+=-I/usr/src/sys -CFLAGS+=-fwritable-strings - -SRCS=bugcrt.c -all: bugcrt.o - -.include <bsd.prog.mk> diff --git a/sys/arch/mvme88k/stand/bugcrt/bugcrt.c b/sys/arch/mvme88k/stand/bugcrt/bugcrt.c deleted file mode 100644 index 5353f981db9..00000000000 --- a/sys/arch/mvme88k/stand/bugcrt/bugcrt.c +++ /dev/null @@ -1,40 +0,0 @@ -#include "bug.h" - -asm (" text"); -/*asm ("_stack: word _stack0xFC0000; stack");*/ -asm ("stack: word stack"); -asm (" word _start"); -asm (" align 8"); - -struct bugenv bugenv; - -start() -{ - register int dlun asm("r2"); - register int clun asm("r3"); - register int ipl asm("r4"); - register int (*entryptr)() asm("r6"); - register int *cfg asm("r7"); - register char *strstr asm("r8"); - register char *endstr asm("r9"); - int i; - char *str; - -asm ("; enable SFU1"); -asm (" ldcr r10,cr1"); -asm (" xor r10,r10,0x8"); -asm (" stcr r10,cr1"); - - bugenv.clun = clun; - bugenv.dlun = dlun; - bugenv.ipl = ipl; - bugenv.entry= entryptr; - - for (str = strstr, i = 0; str <= strstr; str++, i++) { - bugenv.bootargs[i] = *str; - } - bugenv.bootargs[i] = 0; - - main(&bugenv); - bugreturn(); -} diff --git a/sys/arch/mvme88k/stand/bugexec/Makefile b/sys/arch/mvme88k/stand/bugexec/Makefile deleted file mode 100644 index 3ed0ff02de6..00000000000 --- a/sys/arch/mvme88k/stand/bugexec/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -all: hello -SRCS= hello.c -OBJS= hello.o - -CFLAGS+=-I${.CURDIR}/include -I${.CURDIR}/${MACHINE_ARCH} -CFLAGS+=-I${.CURDIR}/../include -I${.CURDIR}/../.. -I/usr/src/sys -CFLAGS+=-fwritable-strings - -LIBBUG!= cd $(.CURDIR)/../libbug; \ - printf "xxx:\n\techo \$${.OBJDIR}/libbug.a\n" | ${MAKE} -r -s -f - xxx - -BUGCRT!= cd $(.CURDIR)/../bugcrt; \ - printf "xxx:\n\techo \$${.OBJDIR}/bugcrt.o\n" | ${MAKE} -r -s -f - xxx - -KERNCRT!= cd $(.CURDIR)/../kerncrt; \ - printf "xxx:\n\techo \$${.OBJDIR}/kerncrt.o\n" | ${MAKE} -r -s -f - xxx - -LDADD+=${LIBBUG} /usr/local/lib/libgcc.a - -hello: $(OBJS) ${LIBBUG} - ${LD} -x -Ttext 10020 ${KERNCRT} $(OBJS) ${LDADD} -o ${.TARGET} -clean: - rm -f a.out *.core - rm -f hello.o hello.bug hello.bug.1 hello.bug.2 - -.include <bsd.prog.mk> diff --git a/sys/arch/mvme88k/stand/bugexec/hello b/sys/arch/mvme88k/stand/bugexec/hello Binary files differdeleted file mode 100644 index 8670fd2b147..00000000000 --- a/sys/arch/mvme88k/stand/bugexec/hello +++ /dev/null diff --git a/sys/arch/mvme88k/stand/bugexec/hello.c b/sys/arch/mvme88k/stand/bugexec/hello.c deleted file mode 100644 index 08ab75d2a27..00000000000 --- a/sys/arch/mvme88k/stand/bugexec/hello.c +++ /dev/null @@ -1,54 +0,0 @@ -#include "bug.h" -#include "bugio.h" - -void putchar __P((char)); -int bcd2int __P((unsigned int)); - -void -putchar(char c) -{ - bugoutchr(c); -} - -main(struct bugenv *env) -{ - struct bugrtc rtc; - struct bugbrdid brdid; - - bugrtcrd(&rtc); - printf("From RTC:\n"); - printf("Year %d\tMonth %d\tDay %d\tDay of Week %d\n", - bcd2int(rtc.Y), bcd2int(rtc.M), bcd2int(rtc.D), bcd2int(rtc.d)); - printf("Hour %d\tMin %d\tSec %d\tCal %d\n", - bcd2int(rtc.H), bcd2int(rtc.m), bcd2int(rtc.s), bcd2int(rtc.c)); - printf("From BRDID:\n"); - bugbrdid(&brdid); -/* printf("Eye catcher %c%c%c%c\n", brdid.eye[0], brdid.eye[1], - brdid.eye[2], brdid.eye[3]); */ - printf("Board no %d (%d) \tsuffix %c%c\n", bcd2int(brdid.brdno), - brdid.brdno, brdid.brdsuf[0], brdid.brdsuf[1]); -/* printf("Clun %x\tdlun %x\n", brdid.clun, brdid.dlun); */ - return 0; -} - -ipow(int base, int i) -{ - int cnt = 1; - while (i--) { - cnt *= base; - } - return cnt; -} - -int -bcd2int(unsigned int i) -{ - unsigned val = 0; - int cnt = 0; - while (i) { - val += (i&0xf) * ipow(10,cnt); - cnt++; - i >>= 4; - } - return val; -} diff --git a/sys/arch/mvme88k/stand/bugexec/wrtos.c b/sys/arch/mvme88k/stand/bugexec/wrtos.c deleted file mode 100644 index 1e01b697399..00000000000 --- a/sys/arch/mvme88k/stand/bugexec/wrtos.c +++ /dev/null @@ -1,64 +0,0 @@ -#include <sys/types.h> -#include <sys/stat.h> -#include <fcntl.h> -#include <unistd.h> -#include <stdio.h> -#include "vid.h" - -#define sec2blk(x) ((x) * 2) -#define BUF_SIZ 512 - -main(int argc, char **argv) -{ - struct vid *pvid; - struct cfg *pcfg; - struct stat stat; - int exe_file; - int tape_vid; - int tape_exe; - char *filename; - char fileext[256]; - char hdrbuf[BUF_SIZ]; - - if (argc == 0){ - filename = "a.out"; - } else { - filename = argv[1]; - } - exe_file = open(filename, O_RDONLY,0444); - if (exe_file == -1) - { - printf("file %s does not exist\n",filename); - exit(2); - } - sprintf (fileext,"%s%s",filename,".1"); - tape_vid = open(fileext, O_WRONLY|O_CREAT|O_TRUNC,0644); - sprintf (fileext,"%s%s",filename,".2"); - tape_exe = open(fileext, O_WRONLY|O_CREAT|O_TRUNC,0644); - - lseek(exe_file,0,SEEK_SET); - memset (hdrbuf,0,BUF_SIZ); - read(exe_file,hdrbuf, 0x20); /* read the header */ - - write(tape_vid,hdrbuf,BUF_SIZ); - - copy_exe(exe_file,tape_exe); - close (exe_file); - close (tape_vid); - close (tape_exe); -} - -copy_exe(exe_file,tape_exe) -{ - char *buf; - int cnt = 0; - - buf = (char *)malloc (BUF_SIZ); - - lseek (exe_file,0x20,SEEK_SET); - while (BUF_SIZ == (cnt = read(exe_file, buf , BUF_SIZ))) { - write (tape_exe,buf,cnt); - } - memset (&buf[cnt],0,BUF_SIZ-cnt); - write (tape_exe,buf,BUF_SIZ); -} diff --git a/sys/arch/mvme88k/stand/bugexec/xyz b/sys/arch/mvme88k/stand/bugexec/xyz Binary files differdeleted file mode 100644 index dbdee90a4e1..00000000000 --- a/sys/arch/mvme88k/stand/bugexec/xyz +++ /dev/null diff --git a/sys/arch/mvme88k/stand/include/bug.h b/sys/arch/mvme88k/stand/include/bug.h deleted file mode 100644 index 93fe1e6ccd5..00000000000 --- a/sys/arch/mvme88k/stand/include/bug.h +++ /dev/null @@ -1,8 +0,0 @@ -struct bugenv { - int clun; - int dlun; - int ipl; - int (*entry)(); - char bootargs[256]; -}; - diff --git a/sys/arch/mvme88k/stand/include/bugio.h b/sys/arch/mvme88k/stand/include/bugio.h deleted file mode 100644 index 74bb77bd336..00000000000 --- a/sys/arch/mvme88k/stand/include/bugio.h +++ /dev/null @@ -1,62 +0,0 @@ -#include "sys/cdefs.h" - -struct bugdisk_io { - char clun; - char dlun; - short status; - void *addr; - int blkno; -#define fileno blkno - short nblks; - char flag; -#define FILEMARKFLAG 0x80 -#define IGNOREFILENO 0x02 -#define ENDOFFILE 0x01 - char am; -}; - -/* values are in BCD {upper nibble+lower nibble} */ - -struct bugrtc { - unsigned char Y; - unsigned char M; - unsigned char D; - unsigned char d; - unsigned char H; - unsigned char m; - unsigned char s; - unsigned char c; -}; - -/* Board ID - lots of info */ - -struct bugbrdid { - unsigned char eye[4]; - char rev; - char month; - char day; - char year; - short packetsize; - short dummy; - short brdno; - unsigned char brdsuf[2]; - char options[3]; - char family:4; - char cpu:4; - short clun; - short dlun; - short type; - short dev; - int option; -}; - -char buginchr __P((void)); -int buginstat __P((void)); -int bugoutchr __P((unsigned char)); -int bugoutstr __P((char *, char *)); -int bugpcrlf __P((void)); -int bugdskrd __P((struct bugdisk_io *)); -int bugdskwr __P((struct bugdisk_io *)); -int bugrtcrd __P((struct bugrtc *)); -int bugreturn __P((void)); -int bugbrdid __P((struct bugbrdid *)); diff --git a/sys/arch/mvme88k/stand/kerncrt/Makefile b/sys/arch/mvme88k/stand/kerncrt/Makefile deleted file mode 100644 index 9645605f8aa..00000000000 --- a/sys/arch/mvme88k/stand/kerncrt/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -OBJ=kerncrt.o -CFLAGS+=-I${.CURDIR}/../include -CFLAGS+=-I${.CURDIR}/../.. -CFLAGS+=-I/usr/src/sys - -SRCS=kerncrt.c -all: kerncrt.o - -.include <bsd.prog.mk> diff --git a/sys/arch/mvme88k/stand/kerncrt/kerncrt.c b/sys/arch/mvme88k/stand/kerncrt/kerncrt.c deleted file mode 100644 index a5f04d2398a..00000000000 --- a/sys/arch/mvme88k/stand/kerncrt/kerncrt.c +++ /dev/null @@ -1,11 +0,0 @@ -#include "bug.h" -start(struct bugenv *bugarea) -{ - main(bugarea); - bugreturn(); -} - -__main() -{ - return; -} diff --git a/sys/arch/mvme88k/stand/libbug/Makefile b/sys/arch/mvme88k/stand/libbug/Makefile deleted file mode 100644 index 065f4b015a1..00000000000 --- a/sys/arch/mvme88k/stand/libbug/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -LIB=bug - -CFLAGS+=-I${.CURDIR}/../include -CFLAGS+=-I${.CURDIR}/../../include -CFLAGS+=-I${.CURDIR}/../.. -CFLAGS+=-I/usr/src/sys -CFLAGS+=-fwritable-strings - -SRCS+=bugio.c -#SRCS+=bugcrt.c bugio.c main.c - -.if (${MACHINE_ARCH} == "m68k") -SRCS+=mvme147.c bcopy.c memset.c -.endif -.if (${MACHINE_ARCH} == "m88k") -SRCS+=bcopy.c memset.c printf.c -.endif - -.PATH: ${.CURDIR}/../../../../lib/libc_sa ${.CURDIR}/${MACHINE_ARCH} - -all: bugio.o - -#bugio.o: bugio.c -# ${CC} ${CFLAGS} -c -O ${.ALLSRC} -# ${LD} -x -r ${.TARGET} -# mv a.out ${.TARGET} - -.include <bsd.lib.mk> diff --git a/sys/arch/mvme88k/stand/libbug/bugio.c b/sys/arch/mvme88k/stand/libbug/bugio.c deleted file mode 100644 index 6406dac3e13..00000000000 --- a/sys/arch/mvme88k/stand/libbug/bugio.c +++ /dev/null @@ -1,101 +0,0 @@ -#include "bugio.h" - -#define INCHR "0x0000" -#define INSTAT "0x0001" -#define INLN "0x0002" -#define READSTR "0x0003" -#define READLN "0x0004" -#define DSKRD "0x0010" -#define DSKWR "0x0011" -#define DSKCFIG "0x0012" -#define OUTCHR "0x0020" -#define PCRLF "0x0026" -#define TMDISP "0x0042" -#define DELAY "0x0043" -#define RTC_DSP "0x0052" -#define RTC_RD "0x0053" -#define RETURN "0x0063" -#define BRD_ID "0x0070" -#define BUGTRAP "0x01F0" - -char -buginchr(void) -{ - register int cc asm("r2"); - asm("or r9,r0," INCHR); - asm("tb0 0,r0,0x1F0"); - /*asm("or %0,r0,r2" : "=r" (cc) : );*/ - return ((char)cc & 0xFF); -} - -/* return 1 if not empty else 0 */ - -buginstat(void) -{ - int ret; - asm("or r9,r0," INSTAT); - asm("tb0 0,r0,0x1F0"); - asm("or %0,r0,r2" : "=r" (ret) : ); - return (ret & 0x40 ? 1 : 0); -} - -bugoutchr(unsigned char c) -{ - unsigned char cc; - - if ((cc = c) == '\n') { - bugpcrlf(); - return; - } - asm("or r2,r0,%0" : : "r" (cc)); - asm("or r9,r0," OUTCHR); - asm("tb0 0,r0,0x1F0"); -} - -bugpcrlf(void) -{ - asm("or r9,r0," PCRLF); - asm("tb0 0,r0,0x1F0"); -} -/* return 0 on success */ - -bugdskrd(struct bugdisk_io *arg) -{ - int ret; - asm("or r9,r0, " DSKRD); - asm("tb0 0,r0,0x1F0"); - asm("or %0,r0,r2" : "=r" (ret) : ); - return ((ret&0x4) == 0x4 ? 1 : 0); -} - -/* return 0 on success */ - -bugdskwr(struct bugdisk_io *arg) -{ - int ret; - asm("or r9,r0, " DSKWR); - asm("tb0 0,r0,0x1F0"); - asm("or %0,r0,r2" : "=r" (ret) : ); - return ((ret&0x4) == 0x4 ? 1 : 0); -} - -bugrtcrd(struct bugrtc *rtc) -{ - asm("or r9,r0, " RTC_RD); - asm("tb0 0,r0,0x1F0"); -} - -bugreturn(void) -{ - asm("or r9,r0, " RETURN); - asm("tb0 0,r0,0x1F0"); -} - -bugbrdid(struct bugbrdid *id) -{ - struct bugbrdid *ptr; - asm("or r9,r0, " BRD_ID); - asm("tb0 0,r0,0x1F0"); - asm("or %0,r0,r2" : "=r" (ptr) : ); - bcopy(ptr, id, sizeof(struct bugbrdid)); -} |