diff options
| -rw-r--r-- | sys/arch/sparc/conf/FLOPPY | 302 |
1 files changed, 0 insertions, 302 deletions
diff --git a/sys/arch/sparc/conf/FLOPPY b/sys/arch/sparc/conf/FLOPPY deleted file mode 100644 index 20a15e20cf3..00000000000 --- a/sys/arch/sparc/conf/FLOPPY +++ /dev/null @@ -1,302 +0,0 @@ -# $OpenBSD: FLOPPY,v 1.20 1999/02/16 21:30:21 art Exp $ -# $NetBSD: GENERIC,v 1.28.2.1 1996/07/02 23:55:22 jtc Exp $ - -# Machine architecture; required by config(8) -machine sparc - -# maxusers means mostly "let's get small" in terms of kernel malloc's -maxusers 2 - -#option INSECURE # default to secure - -option TIMEZONE=0 # time zone to adjust RTC time by -option DST=0 # daylight savings time used by RTC - -option SWAPPAGER # paging; REQUIRED -option DEVPAGER # mmap() of devices - -#option DDB # in-kernel debugger -#makeoption DEBUG="-g" # compile full symbol table -#option DIAGNOSTIC # internal consistency checks -#option KTRACE # system call tracing, a la ktrace(1) - -#option SYSVMSG # System V-like message queues -#option SYSVSEM # System V-like semaphores -#option SYSVSHM # System V-like memory sharing -#option SHMMAXPGS=1024 # 1024 pages is the default - -option COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8, -option COMPAT_09 # NetBSD 0.9, -option COMPAT_10 # NetBSD 1.0, -option COMPAT_11 # NetBSD 1.1, -option COMPAT_43 # and 4.3BSD -#option TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD - -option LKM # loadable kernel modules - -option FFS # UFS -#option QUOTA # UFS quotas -option MFS # memory file system - - -option NFSCLIENT # Network File System client -#option NFSSERVER # Network File System server - -option CD9660 # ISO 9660 + Rock Ridge file system -option MSDOSFS # MS-DOS file system -option FDESC # /dev/fd -option FIFO # FIFOs; RECOMMENDED -option KERNFS # /kern -#option NULLFS # loopback file system -#option PORTAL # create sockets with open(2) -option PROCFS # /proc -#option UMAPFS # NULLFS + uid and gid remapping -#option UNION # union file system - -#option GATEWAY # packet forwarding -option INET # IP + ICMP + TCP + UDP -#option NS # XNS -#option NSIP # XNS tunneling over IP -#option IPX # IPX+SPX -#option IPXIP # IPX tunneling over IP -#option ISO,TPIP # OSI -#option EON # OSI tunneling over IP -#option CCITT,LLC,HDLC # X.25 -#option IPFILTER # IP packet filter for security -#option IPFILTER_LOG # use /dev/ipl to log IPF - -pseudo-device loop 1 # network loopback -#pseudo-device bpfilter 8 # packet filter -#pseudo-device sl 2 # CSLIP -#pseudo-device ppp 2 # PPP -#pseudo-device tun 2 # network tunneling over tty - -pseudo-device pty 64 # pseudo-terminals -#pseudo-device tb 1 # tablet line discipline -pseudo-device vnd 4 # paging to files -pseudo-device ccd 4 # concatenated disk devices - -option BOOT_CONFIG # add support for boot -c - -# Options for variants of the Sun SPARC architecure. -# At least one is required. -#option SUN4 # sun4/100, sun4/200, sun4/300 -option SUN4C # sun4c - SS1, 1+, 2, ELC, SLC, IPC, IPX, etc. -option SUN4M # sun4m - SS10, SS20, Classic, etc. - -#option MMU_3L # 3-level MMU on sun4/400 - -#option KGDB # support for kernel gdb -#option KGDBDEV=0xc01 # kgdb device number (dev_t) -#option KGDBRATE=38400 # baud rate - -# Options for SPARCstation hardware -option RASTERCONSOLE # fast rasterop console - -# Generic swap; second partition of root disk or network. -config bsd swap generic - -# Main bus and CPU .. all systems. -mainbus0 at root -cpu0 at mainbus0 - -# Bus types found on SPARC systems. -sbus0 at mainbus0 # sun4c -obio0 at mainbus0 # sun4 and sun4m -#vmes0 at mainbus0 # sun4 -#vmel0 at mainbus0 # sun4 -iommu0 at mainbus0 # sun4m -sbus0 at iommu0 # sun4m - -#audioamd0 at mainbus0 # sun4c -#audioamd0 at obio0 # sun4m -#audio* at audioamd? - -auxreg0 at mainbus0 # sun4c -auxreg0 at obio0 # sun4m - -# Power status and control register found on Sun4m systems -#power0 at obio0 - -# Mostek clock found on 4/300, sun4c, and sun4m systems. -# The Mostek clock NVRAM is the "eeprom" on sun4/300 systems. -clock0 at mainbus0 # sun4c -clock0 at obio0 # sun4m -#clock0 at obio0 addr 0xf2000000 # sun4/300 - -# Intersil clock found on 4/100 and 4/200 systems. -#oclock0 at obio0 addr 0xf3000000 # sun4/200 -#oclock0 at obio0 addr 0x03000000 # sun4/100 - -# Memory error registers. -memreg0 at mainbus0 # sun4c -memreg0 at obio0 # sun4m -#memreg0 at obio0 addr 0xf4000000 # sun4/200 and sun4/300 -#memreg0 at obio0 addr 0x04000000 # sun4/100 - -# Timer chip found on 4/300, sun4c, and sun4m systems. -timer0 at mainbus0 # sun4c -timer0 at obio0 # sun4m -#timer0 at obio0 addr 0xef000000 # sun4/300 - -# EEPROM found on 4/100 and 4/200 systems. Note that the 4/300 -# doesn't use this driver; the `EEPROM' is in the NVRAM on the -# Mostek clock chip on 4/300 systems. -#eeprom0 at obio0 addr 0xf2000000 # sun4/200 -#eeprom0 at obio0 addr 0x02000000 # sun4/100 - -# Zilog 8530 serial chips. Each has two-channels. -# zs0 is ttya and ttyb. zs1 is the keyboard and mouse. -zs0 at mainbus0 # sun4c -zs0 at obio0 # sun4m -#zs0 at obio0 addr 0xf1000000 level 12 flags 0x103 # sun4/200 and sun4/300 -#zs0 at obio0 addr 0x01000000 level 12 flags 0x103 # sun4/100 -zs1 at mainbus0 # sun4c -zs1 at obio0 # sun4m -#zs1 at obio0 addr 0xf0000000 level 12 flags 0x103 # sun4/200 and sun4/300 -#zs1 at obio0 addr 0x00000000 level 12 flags 0x103 # sun4/100 -#zs2 at obio0 addr 0xe0000000 level 12 flags 0x103 # sun4/300 - -# -# Note the flags on the esp entries below, that work around -# deficiencies in the current driver: -# bits 0-7: disable disconnect/reselect for the corresponding target -# bits 8-15: disable synch negotiation for target [bit-8] -# Note: targets 4-7 have disconnect/reselect enabled on the premise -# that tape devices normally have one of these targets. Tape -# devices should be allowed to disconnect for the SCSI bus -# to operate acceptably. -# - -# sun4/300 SCSI - an NCR53c94 or equivalent behind -# an LSI Logic DMA controller -#dma0 at obio0 addr 0xfa001000 level 4 # sun4/300 -esp0 at obio0 addr 0xfa000000 level 4 flags 0xff0f # - -# sun4c or sun4m SCSI - an NCR53c94 or equivalent behind -# specialized DMA glue -dma0 at sbus0 slot ? offset ? # on-board SCSI -esp0 at sbus0 slot ? offset ? flags 0xff0f # sun4c -esp0 at dma0 flags 0xff0f # sun4m - -# FSBE/S SCSI - an NCR53c94 or equivalent behind -dma* at sbus? slot ? offset ? # SBus SCSI -esp* at sbus? slot ? offset ? flags 0xff0f # two flavours -esp* at dma? flags 0xff0f # depending on model - -# sun4m Ethernet - an AMD 7990 LANCE behind -# specialized DMA glue -ledma0 at sbus0 slot ? offset ? # sun4m on-board -le0 at ledma0 # - -# Additional SBus LANCE devices - glued on by lebuffer (not yet implemented) -#lebuffer* at sbus0 slot ? offset ? # sun4m SBus -#le* at lebuffer? # - -# sun4/300 and sun4c Ethernet - an AMD 7990 LANCE -le0 at sbus0 slot ? offset ? # sun4c on-board -le* at sbus? slot ? offset ? - -#le0 at obio0 addr 0xf9000000 level 6 # sun4/300 - -# sun4/100 and sun4/200 Ethernet - an Intel 82586 on-board -# or on a Multibus/VME card. -#ie0 at obio0 addr 0xf6000000 level 6 # sun4/200 on-board -#ie0 at obio0 addr 0x06000000 level 6 # sun4/100 on-board - -#ie1 at vmes0 addr 0xffe88000 level 5 vect 0x75 -#ie2 at vmes0 addr 0xff31ff02 level 5 vect 0x76 -#ie3 at vmes0 addr 0xff35ff02 level 5 vect 0x77 -#ie4 at vmes0 addr 0xff2dff02 level 5 vect 0x7c - -# Xylogics 753 or 7053 VME SMD disk controllers and disks, found -# on sun4 systems. -#xdc0 at vmel0 addr 0xffffee80 level 3 vect 0x44 -#xdc1 at vmel0 addr 0xffffee90 level 3 vect 0x45 -#xdc2 at vmel0 addr 0xffffeea0 level 3 vect 0x46 -#xdc3 at vmel0 addr 0xffffeeb0 level 3 vect 0x47 -#xd* at xdc? drive ? - -# Xylogics 451 or 451 VME SMD disk controllers and disks, found -# on sun4 systems. -#xyc0 at vmes0 addr 0xffffee40 level 3 vect 0x48 -#xyc1 at vmes0 addr 0xffffee48 level 3 vect 0x49 -#xy* at xyc? drive ? - -# NCR5380-based "Sun SCSI 3" VME SCSI controller. -# This driver has several flags which may be enabled by OR'ing -# the values and using the "flags" directive. -# Valid flags are: -# -# 0x01 Use DMA (may be polled) -# 0x02 Use DMA completion interrupts -# 0x04 Allow disconnect/reselect -# -# E.g. the following would enable DMA, interrupts, and reselect: -# si0 at vmes0 addr 0xff200000 level 3 vect 0x40 flags 0x07 -# -# By default, DMA is enabled in the driver. -#si0 at vmes0 addr 0xff200000 level 3 vect 0x40 - -# NCR5380-based "SCSI Weird" on-board SCSI interface found -# on sun4/100 systems. The flags are the same as the "si" -# controller. Note, while DMA is enabled by default, only -# polled DMA works at this time, and reselects do not work -# on this particular controller. -#sw0 at obio0 addr 0x0a000000 level 3 - -# Sun "bwtwo" black and white framebuffer, found on sun4, sun4c, and sun4m -# systems. If your sun4 system has a cgfour installed in the P4 slot, -# the P4 entries for "bwtwo" will attach to the overlay plane of the -# "cgfour". -bwtwo0 at sbus0 slot ? offset ? # sun4c on-board -bwtwo* at sbus? slot ? offset ? # sun4c and sun4m -#bwtwo0 at obio0 addr 0xfd000000 level 4 # sun4/200 -#bwtwo0 at obio0 addr 0xfb300000 level 4 # sun4/300 in P4 slot -#bwtwo0 at obio0 addr 0x0b300000 level 4 # sun4/100 in P4 slot - -# Sun "cgtwo" VME color framebuffer -#cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xa8 - -# Sun "cgthree" Sbus color framebuffer -cgthree0 at sbus? slot ? offset ? -cgthree* at sbus? slot ? offset ? -#cgthree0 at obio? slot ? offset ? # sun4m -#cgthree* at obio? slot ? offset ? # sun4m - -# Sun "cgfour" color framebuffer with overlay plane. See above comment -# regarding overlay plane. -#cgfour0 at obio0 addr 0xfb300000 level 4 # sun4/300 P4 -#cgfour0 at obio0 addr 0x0b300000 level 4 # sun4/100 P4 - -# Sun "cgsix" accelerated color framebuffer. -cgsix0 at sbus? slot ? offset ? -cgsix* at sbus? slot ? offset ? -#cgsix0 at obio0 addr 0xfb000000 level 4 # sun4/300 P4 -#cgsix0 at obio0 addr 0x0b000000 level 4 # sun4/100 P4 - -# Sun "cgeight" 24-bit framebuffer -#cgeight0 at obio0 addr 0xfb300000 level 4 # sun4/300 P4 -#cgeight0 at obio0 addr 0x0b300000 level 4 # sun4/100 P4 - -# SCSI bus layer. SCSI devices attach to the SCSI bus, which attaches -# to the underlying hardware controller. -scsibus* at esp? -#scsibus* at si? -#scsibus* at sw? - -# These entries find devices on all SCSI busses and assign -# unit numers dynamically. -sd* at scsibus? target ? lun ? # SCSI disks -st* at scsibus? target ? lun ? # SCSI tapes -cd* at scsibus? target ? lun ? # SCSI CD-ROMs -#ch* at scsibus? target ? lun ? # SCSI changer devices - -# Floppy controller and drive found on SPARCstations. -fdc0 at mainbus0 # sun4c controller -fdc0 at obio0 # sun4m controller -fd* at fdc0 # the drive itself - -pseudo-device kbd # Sun keyboard -#pseudo-device strip 1 # radio clock - |