diff options
-rw-r--r-- | sys/dev/pci/if_wpi.c | 140 | ||||
-rw-r--r-- | sys/dev/pci/if_wpireg.h | 27 |
2 files changed, 42 insertions, 125 deletions
diff --git a/sys/dev/pci/if_wpi.c b/sys/dev/pci/if_wpi.c index 11255d214c5..4d74f40f3de 100644 --- a/sys/dev/pci/if_wpi.c +++ b/sys/dev/pci/if_wpi.c @@ -1,4 +1,4 @@ -/* $OpenBSD: if_wpi.c,v 1.53 2007/09/07 19:05:05 damien Exp $ */ +/* $OpenBSD: if_wpi.c,v 1.54 2007/09/10 20:34:43 damien Exp $ */ /*- * Copyright (c) 2006, 2007 @@ -131,9 +131,6 @@ int wpi_set_txpower(struct wpi_softc *, struct ieee80211_channel *, int); int wpi_get_power_index(struct wpi_softc *, struct wpi_power_group *, struct ieee80211_channel *, int); -#ifdef notyet -int wpi_setup_beacon(struct wpi_softc *, struct ieee80211_node *); -#endif int wpi_auth(struct wpi_softc *); int wpi_scan(struct wpi_softc *, uint16_t); int wpi_config(struct wpi_softc *); @@ -1565,12 +1562,14 @@ wpi_tx_data(struct wpi_softc *sc, struct mbuf *m0, struct ieee80211_node *ni, struct wpi_cmd_data *tx; struct ieee80211_frame *wh; struct mbuf *mnew; + u_int hdrlen; int i, rate, error, ovhd = 0; desc = &ring->desc[ring->cur]; data = &ring->data[ring->cur]; wh = mtod(m0, struct ieee80211_frame *); + hdrlen = ieee80211_get_hdrlen(wh); /* pickup a rate */ if (IEEE80211_IS_MULTICAST(wh->i_addr1) || @@ -1675,21 +1674,17 @@ wpi_tx_data(struct wpi_softc *sc, struct mbuf *m0, struct ieee80211_node *ni, } else tx->timeout = htole16(0); + tx->len = htole16(m0->m_pkthdr.len); tx->rate = wpi_plcp_signal(rate); - - /* be very persistant at sending frames out */ tx->rts_ntries = 7; tx->data_ntries = 15; - tx->ofdm_mask = 0xff; tx->cck_mask = 0x0f; tx->lifetime = htole32(WPI_LIFETIME_INFINITE); - tx->len = htole16(m0->m_pkthdr.len); - - /* save and trim IEEE802.11 header */ - m_copydata(m0, 0, sizeof (struct ieee80211_frame), (caddr_t)&tx->wh); - m_adj(m0, sizeof (struct ieee80211_frame)); + /* copy and trim IEEE802.11 header */ + memcpy((uint8_t *)(tx + 1), wh, hdrlen); + m_adj(m0, hdrlen); error = bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m0, BUS_DMA_NOWAIT); @@ -1743,7 +1738,8 @@ wpi_tx_data(struct wpi_softc *sc, struct mbuf *m0, struct ieee80211_node *ni, (1 + data->map->dm_nsegs) << 24); desc->segs[0].addr = htole32(ring->cmd_dma.paddr + ring->cur * sizeof (struct wpi_tx_cmd)); - desc->segs[0].len = htole32(4 + sizeof (struct wpi_cmd_data)); + desc->segs[0].len = htole32(4 + sizeof (struct wpi_cmd_data) + + ((hdrlen + 3) & ~3)); for (i = 1; i <= data->map->dm_nsegs; i++) { desc->segs[i].addr = htole32(data->map->dm_segs[i - 1].ds_addr); @@ -2266,81 +2262,6 @@ wpi_get_power_index(struct wpi_softc *sc, struct wpi_power_group *group, #undef fdivround } -/* - * Build a beacon frame that the firmware will broadcast periodically in - * IBSS or HostAP modes. - */ -#ifdef notyet -int -wpi_setup_beacon(struct wpi_softc *sc, struct ieee80211_node *ni) -{ - struct ieee80211com *ic = &sc->sc_ic; - struct wpi_tx_ring *ring = &sc->cmdq; - struct wpi_tx_desc *desc; - struct wpi_tx_data *data; - struct wpi_tx_cmd *cmd; - struct wpi_cmd_beacon *bcn; - struct mbuf *m0; - int error; - - desc = &ring->desc[ring->cur]; - data = &ring->data[ring->cur]; - - m0 = ieee80211_beacon_alloc(ic, ni); - if (m0 == NULL) { - printf("%s: could not allocate beacon frame\n", - sc->sc_dev.dv_xname); - return ENOMEM; - } - - cmd = &ring->cmd[ring->cur]; - cmd->code = WPI_CMD_SET_BEACON; - cmd->flags = 0; - cmd->qid = ring->qid; - cmd->idx = ring->cur; - - bcn = (struct wpi_cmd_beacon *)cmd->data; - memset(bcn, 0, sizeof (struct wpi_cmd_beacon)); - bcn->id = WPI_ID_BROADCAST; - bcn->ofdm_mask = 0xff; - bcn->cck_mask = 0x0f; - bcn->lifetime = htole32(WPI_LIFETIME_INFINITE); - bcn->len = htole16(m0->m_pkthdr.len); - bcn->rate = (ic->ic_curmode == IEEE80211_MODE_11A) ? - wpi_plcp_signal(12) : wpi_plcp_signal(2); - bcn->flags = htole32(WPI_TX_AUTO_SEQ | WPI_TX_INSERT_TSTAMP); - - /* save and trim IEEE802.11 header */ - m_copydata(m0, 0, sizeof (struct ieee80211_frame), (caddr_t)&bcn->wh); - m_adj(m0, sizeof (struct ieee80211_frame)); - - /* assume beacon frame is contiguous */ - error = bus_dmamap_load(sc->sc_dmat, data->map, mtod(m0, void *), - m0->m_pkthdr.len, NULL, BUS_DMA_NOWAIT); - if (error != 0) { - printf("%s: could not map beacon\n", sc->sc_dev.dv_xname); - m_freem(m0); - return error; - } - - data->m = m0; - - /* first scatter/gather segment is used by the beacon command */ - desc->flags = htole32(WPI_PAD32(m0->m_pkthdr.len) << 28 | 2 << 24); - desc->segs[0].addr = htole32(ring->cmd_dma.paddr + - ring->cur * sizeof (struct wpi_tx_cmd)); - desc->segs[0].len = htole32(4 + sizeof (struct wpi_cmd_beacon)); - desc->segs[1].addr = htole32(data->map->dm_segs[0].ds_addr); - desc->segs[1].len = htole32(data->map->dm_segs[0].ds_len); - - /* kick cmd ring */ - ring->cur = (ring->cur + 1) % WPI_CMD_RING_COUNT; - WPI_WRITE(sc, WPI_TX_WIDX, ring->qid << 8 | ring->cur); - - return 0; -} -#endif - int wpi_auth(struct wpi_softc *sc) { @@ -2418,6 +2339,8 @@ wpi_scan(struct wpi_softc *sc, uint16_t flags) struct wpi_tx_data *data; struct wpi_tx_cmd *cmd; struct wpi_scan_hdr *hdr; + struct wpi_cmd_data *tx; + struct wpi_scan_essid *essid; struct wpi_scan_chan *chan; struct ieee80211_frame *wh; struct ieee80211_rateset *rs; @@ -2452,9 +2375,6 @@ wpi_scan(struct wpi_softc *sc, uint16_t flags) hdr = (struct wpi_scan_hdr *)cmd->data; memset(hdr, 0, sizeof (struct wpi_scan_hdr)); - hdr->txflags = htole32(WPI_TX_AUTO_SEQ); - hdr->id = WPI_ID_BROADCAST; - hdr->lifetime = htole32(WPI_LIFETIME_INFINITE); /* * Move to the next channel if no packets are received within 5 msecs * after sending the probe request (this helps to reduce the duration @@ -2463,26 +2383,32 @@ wpi_scan(struct wpi_softc *sc, uint16_t flags) hdr->quiet = htole16(5); /* timeout in milliseconds */ hdr->plcp_threshold = htole16(1); /* min # of packets */ + tx = (struct wpi_cmd_data *)(hdr + 1); + tx->flags = htole32(WPI_TX_AUTO_SEQ); + tx->id = WPI_ID_BROADCAST; + tx->lifetime = htole32(WPI_LIFETIME_INFINITE); + if (flags & IEEE80211_CHAN_A) { hdr->crc_threshold = htole16(1); /* send probe requests at 6Mbps */ - hdr->rate = wpi_plcp_signal(12); + tx->rate = wpi_ridx_to_plcp[WPI_OFDM6]; } else { hdr->flags = htole32(WPI_CONFIG_24GHZ | WPI_CONFIG_AUTO); /* send probe requests at 1Mbps */ - hdr->rate = wpi_plcp_signal(2); + tx->rate = wpi_ridx_to_plcp[WPI_CCK1]; } - /* for directed scans, firmware inserts the essid IE itself */ - hdr->essid[0].id = IEEE80211_ELEMID_SSID; - hdr->essid[0].len = ic->ic_des_esslen; - memcpy(hdr->essid[0].data, ic->ic_des_essid, ic->ic_des_esslen); + essid = (struct wpi_scan_essid *)(tx + 1); + memset(essid, 0, 4 * sizeof (struct wpi_scan_essid)); + essid[0].id = IEEE80211_ELEMID_SSID; + essid[0].len = ic->ic_des_esslen; + memcpy(essid[0].data, ic->ic_des_essid, ic->ic_des_esslen); /* * Build a probe request frame. Most of the following code is a * copy & paste of what is done in net80211. */ - wh = (struct ieee80211_frame *)(hdr + 1); + wh = (struct ieee80211_frame *)&essid[4]; wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_REQ; wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; @@ -2494,9 +2420,8 @@ wpi_scan(struct wpi_softc *sc, uint16_t flags) frm = (uint8_t *)(wh + 1); - /* add empty essid IE (firmware generates it for directed scans) */ - *frm++ = IEEE80211_ELEMID_SSID; - *frm++ = 0; + /* add SSID IE */ + frm = ieee80211_add_ssid(frm, ic->ic_des_essid, ic->ic_des_esslen); mode = ieee80211_chan2mode(ic, ic->ic_ibss_chan); rs = &ic->ic_sup_rates[mode]; @@ -2509,7 +2434,7 @@ wpi_scan(struct wpi_softc *sc, uint16_t flags) frm = ieee80211_add_xrates(frm, rs); /* setup length of probe request */ - hdr->paylen = htole16(frm - (uint8_t *)wh); + tx->len = htole16(frm - (uint8_t *)wh); chan = (struct wpi_scan_chan *)frm; for (c = &ic->ic_channels[1]; @@ -2848,6 +2773,17 @@ wpi_init(struct ifnet *ifp) goto fail1; } + /* check that the radio is not disabled by RF switch */ + wpi_mem_lock(sc); + tmp = wpi_mem_read(sc, WPI_MEM_RFKILL); + wpi_mem_unlock(sc); + if (!(tmp & 1)) { + printf("%s: radio is disabled by hardware switch\n", + sc->sc_dev.dv_xname); + error = EPERM; /* XXX ;-) */ + goto fail1; + } + /* wait for thermal sensors to calibrate */ for (ntries = 0; ntries < 1000; ntries++) { if ((sc->temp = (int)WPI_READ(sc, WPI_TEMPERATURE)) != 0) diff --git a/sys/dev/pci/if_wpireg.h b/sys/dev/pci/if_wpireg.h index b989feb635b..98a8ed65b5b 100644 --- a/sys/dev/pci/if_wpireg.h +++ b/sys/dev/pci/if_wpireg.h @@ -1,4 +1,4 @@ -/* $OpenBSD: if_wpireg.h,v 1.17 2007/07/24 16:07:47 damien Exp $ */ +/* $OpenBSD: if_wpireg.h,v 1.18 2007/09/10 20:34:43 damien Exp $ */ /*- * Copyright (c) 2006, 2007 @@ -83,6 +83,7 @@ #define WPI_MEM_BYPASS2 0x2e30 #define WPI_MEM_CLOCK1 0x3004 #define WPI_MEM_CLOCK2 0x3008 +#define WPI_MEM_RFKILL 0x3014 #define WPI_MEM_POWER 0x300c #define WPI_MEM_PCIDEV 0x3010 #define WPI_MEM_UCODE_CTL 0x3400 @@ -393,7 +394,6 @@ struct wpi_cmd_data { uint8_t data_ntries; uint16_t timeout; uint16_t txop; - struct ieee80211_frame wh; } __packed; /* structure for command WPI_CMD_SET_BEACON */ @@ -476,27 +476,8 @@ struct wpi_scan_hdr { uint32_t flags; uint32_t filter; - /* wpi_cmd_data structure */ - uint16_t paylen; - uint16_t lnext; - uint32_t txflags; - uint8_t rate; - uint8_t id; - uint8_t tid; - uint8_t security; - uint8_t key[IEEE80211_KEYBUF_SIZE]; - uint8_t tkip[IEEE80211_WEP_MICLEN]; - uint32_t fnext; - uint32_t lifetime; - uint8_t ofdm_mask; - uint8_t cck_mask; - uint8_t rts_ntries; - uint8_t data_ntries; - uint16_t timeout; - uint16_t txop; - - struct wpi_scan_essid essid[4]; - + /* followed by a struct wpi_cmd_data */ + /* followed by an array of 4x struct wpi_scan_essid */ /* followed by probe request body */ /* followed by nchan x wpi_scan_chan */ } __packed; |