diff options
-rw-r--r-- | sys/dev/isa/if_ex.c | 117 | ||||
-rw-r--r-- | sys/dev/isa/if_exreg.h | 4 |
2 files changed, 112 insertions, 9 deletions
diff --git a/sys/dev/isa/if_ex.c b/sys/dev/isa/if_ex.c index 7aad03f36c4..a134ce1b012 100644 --- a/sys/dev/isa/if_ex.c +++ b/sys/dev/isa/if_ex.c @@ -1,4 +1,4 @@ -/* $OpenBSD: if_ex.c,v 1.30 2007/10/21 00:55:55 brad Exp $ */ +/* $OpenBSD: if_ex.c,v 1.31 2007/10/21 02:25:27 brad Exp $ */ /* * Copyright (c) 1997, Donald A. Schmidt * Copyright (c) 1996, Javier Martín Rueda (jmrueda@diatel.upm.es) @@ -108,6 +108,7 @@ void ex_init(struct ex_softc *); void ex_start(struct ifnet *); void ex_stop(struct ex_softc *); int ex_ioctl(struct ifnet *, u_long, caddr_t); +void ex_setmulti(struct ex_softc *); void ex_reset(struct ex_softc *); void ex_watchdog(struct ifnet *); int ex_get_media(struct ex_softc *); @@ -250,8 +251,7 @@ ex_attach(struct device *parent, struct device *self, void *aux) ifp->if_start = ex_start; ifp->if_ioctl = ex_ioctl; ifp->if_watchdog = ex_watchdog; - ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST; /* XXX not done yet. - | IFF_MULTICAST */ + ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST; IFQ_SET_READY(&ifp->if_snd); ifmedia_init(&sc->ifmedia, 0, ex_ifmedia_upd, ex_ifmedia_sts); @@ -359,7 +359,9 @@ ex_init(struct ex_softc *sc) ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; DODEBUG(Status, printf("OIDLE init\n");); - + + ex_setmulti(sc); + /* * Final reset of the board, and enable operation. */ @@ -776,11 +778,16 @@ ex_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) ifp->if_mtu = ifr->ifr_mtu; break; case SIOCADDMULTI: - DODEBUG(Start_End, printf("SIOCADDMULTI");); case SIOCDELMULTI: - DODEBUG(Start_End, printf("SIOCDELMULTI");); - /* XXX Support not done yet. */ - error = EINVAL; + error = (cmd == SIOCADDMULTI) + ? ether_addmulti(ifr, &sc->arpcom) + : ether_delmulti(ifr, &sc->arpcom); + + if (error == ENETRESET) { + if (ifp->if_flags & IFF_RUNNING) + ex_init(sc); + error = 0; + } break; case SIOCSIFMEDIA: case SIOCGIFMEDIA: @@ -798,6 +805,100 @@ ex_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) return(error); } +void +ex_setmulti(struct ex_softc *sc) +{ + struct arpcom *ac = &sc->arpcom; + struct ifnet *ifp = &sc->arpcom.ac_if; + struct ether_multi *enm; + struct ether_multistep step; + uint16_t *addr; + int count, timeout, status; + + ifp->if_flags &= ~IFF_ALLMULTI; + + count = 0; + ETHER_FIRST_MULTI(step, ac, enm); + while (enm != NULL) { + count++; + ETHER_NEXT_MULTI(step, enm); + } + + if (count > 63 || ac->ac_multirangecnt > 0) + ifp->if_flags |= IFF_ALLMULTI; + + if (ifp->if_flags & IFF_PROMISC || ifp->if_flags & IFF_ALLMULTI) { + /* + * Interface is in promiscuous mode, there are too many + * multicast addresses for the card to handle or there + * is a multicast range + */ + CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); + CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) | Promisc_Mode); + CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3)); + CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); + } else if (ifp->if_flags & IFF_MULTICAST && count > 0) { + /* Program multicast addresses plus our MAC address + * into the filter */ + CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); + CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) | Multi_IA); + CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3)); + CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); + + /* Borrow space from TX buffer; this should be safe + * as this is only called from ex_init */ + + CSR_WRITE_2(sc, HOST_ADDR_REG, sc->tx_lower_limit); + CSR_WRITE_2(sc, IO_PORT_REG, MC_Setup_CMD); + CSR_WRITE_2(sc, IO_PORT_REG, 0); + CSR_WRITE_2(sc, IO_PORT_REG, 0); + CSR_WRITE_2(sc, IO_PORT_REG, (count + 1) * 6); + + ETHER_FIRST_MULTI(step, ac, enm); + while (enm != NULL) { + addr = (uint16_t*)enm->enm_addrlo; + CSR_WRITE_2(sc, IO_PORT_REG, *addr++); + CSR_WRITE_2(sc, IO_PORT_REG, *addr++); + CSR_WRITE_2(sc, IO_PORT_REG, *addr++); + ETHER_NEXT_MULTI(step, enm); + } + + /* Program our MAC address as well */ + /* XXX: Is this necessary? The Linux driver does this + * but the NetBSD driver does not */ + addr = (uint16_t*) sc->arpcom.ac_enaddr; + CSR_WRITE_2(sc, IO_PORT_REG, *addr++); + CSR_WRITE_2(sc, IO_PORT_REG, *addr++); + CSR_WRITE_2(sc, IO_PORT_REG, *addr++); + + CSR_READ_2(sc, IO_PORT_REG); + CSR_WRITE_2(sc, XMT_BAR, sc->tx_lower_limit); + CSR_WRITE_1(sc, CMD_REG, MC_Setup_CMD); + + sc->tx_head = sc->tx_lower_limit; + sc->tx_tail = sc->tx_head + XMT_HEADER_LEN + (count + 1) * 6; + + for (timeout = 0; timeout < 100; timeout++) { + DELAY(2); + if ((CSR_READ_1(sc, STATUS_REG) & Exec_Int) == 0) + continue; + + status = CSR_READ_1(sc, CMD_REG); + CSR_WRITE_1(sc, STATUS_REG, Exec_Int); + break; + } + + sc->tx_head = sc->tx_tail; + } else { + /* No multicast or promiscuous mode */ + CSR_WRITE_1(sc, CMD_REG, Bank2_Sel); + CSR_WRITE_1(sc, REG2, CSR_READ_1(sc, REG2) & 0xDE); + /* ~(Multi_IA | Promisc_Mode) */ + CSR_WRITE_1(sc, REG3, CSR_READ_1(sc, REG3)); + CSR_WRITE_1(sc, CMD_REG, Bank0_Sel); + } +} + void ex_reset(struct ex_softc *sc) { diff --git a/sys/dev/isa/if_exreg.h b/sys/dev/isa/if_exreg.h index c511380e5b7..2e1a48084dc 100644 --- a/sys/dev/isa/if_exreg.h +++ b/sys/dev/isa/if_exreg.h @@ -1,4 +1,4 @@ -/* $OpenBSD: if_exreg.h,v 1.2 2007/10/21 00:55:55 brad Exp $ */ +/* $OpenBSD: if_exreg.h,v 1.3 2007/10/21 02:25:27 brad Exp $ */ /* * Copyright (c) 1996, Javier Martín Rueda (jmrueda@diatel.upm.es) * All rights reserved. @@ -115,8 +115,10 @@ #define Disc_Bad_Fr 0x80 #define Tx_Chn_ErStp 0x40 #define Tx_Chn_Int_Md 0x20 +#define Multi_IA 0x20 #define No_SA_Ins 0x10 #define RX_CRC_InMem 0x04 +#define Promisc_Mode 0x01 #define BNC_bit 0x20 #define TPE_bit 0x04 #define I_ADDR_REG0 4 |