diff options
| -rw-r--r-- | distrib/notes/amiga/hardware | 24 |
1 files changed, 17 insertions, 7 deletions
diff --git a/distrib/notes/amiga/hardware b/distrib/notes/amiga/hardware index 34e3f96070e..5006c73f507 100644 --- a/distrib/notes/amiga/hardware +++ b/distrib/notes/amiga/hardware @@ -8,11 +8,11 @@ compile, however it won't be speedy. X really isn't usable on a Here is a table of recommended HD partition sizes for a full install: partition: advise, with X, needed, with X - root (/) 15M 15M 10M 10M + root (/) 20M 15M 20M 15M user (/usr) 65M 100M 45M 80M - swap ----- 2M for every M ram ----- - local (/local) up to you - + swap ---- 1MB for every MB RAM ---- + -- but the sum of swap and --- + - RAM should be at least 16 -- As you may note the recommended size of /usr is 20M greater than needed. This is to leave room for a kernel source and compile tree @@ -24,6 +24,7 @@ larger, as your system will be doing much more swapping. Supported devices include: A4000/A1200 IDE controller. + ISA IDE & ATAPI (but with limitations) with a supported ISA bridge. SCSI host adapters: 33c93 based boards: A2091, A3000 and GVP series II. 53c80 based boards: 12 Gauge, IVS and Wordsync/Bytesync. @@ -44,6 +45,9 @@ Supported devices include: A4066 Ethernet Ariadne Ethernet Quicknet Ethernet + Via a supported ISA bridge: + NE[12]000, SMC/WD 8003/8013/8216, 3COM 3c503 Ethernet + Arcnet controllers: A2060 Arcnet Tape drives: @@ -51,12 +55,18 @@ Supported devices include: Archive Viper, Cipher SCSI-2 ST150. CD-ROM drives: Most SCSI CD-ROM drives - Serial cards: + Serial ports: + Amiga serial port. MultiFaceCard II and III A2232 + PC COM ports attached to a supported ISA bridge + Parallel ports: + Amiga parallel port. + PC LPT ports attached to a supported ISA bridge + ISA bridges: + The GoldenGate Bus+ (aka GG2) + The CrossLink Amiga floppy drives. - Amiga parallel port. - Amiga serial port. Amiga mouse. If its not on this list, there is no support for it in this release. |