diff options
| -rw-r--r-- | distrib/notes/armish/prep | 25 |
1 files changed, 11 insertions, 14 deletions
diff --git a/distrib/notes/armish/prep b/distrib/notes/armish/prep index df5f58e2ac6..7b2f77ce168 100644 --- a/distrib/notes/armish/prep +++ b/distrib/notes/armish/prep @@ -1,4 +1,4 @@ -dnl $OpenBSD: prep,v 1.11 2008/02/24 18:37:14 ian Exp $ +dnl $OpenBSD: prep,v 1.12 2008/03/08 01:13:18 sthen Exp $ To be able to boot the OpenBSD/MACHINE installation program, you will need to learn a bit about RedBoot, the low-level process that controls the microprocessor after hardware initialization. @@ -81,26 +81,23 @@ Once you have done this, and have set up your TFTP server on the gateway machine (10.0.0.7 in the above example), you can boot manually. -RedBoot> load /boot.armish +RedBoot> load /bsd.rd Using default protocol (TFTP) -Entry point: 0x00100000, address range: 0x00100000-0x00106804 +Entry point: 0x00200000, address range: 0x00200000-0x0066a49c RedBoot> go ->> OpenBSD/armish BOOT 1.0 -boot> boot /bsd.rd -booting wd0a:/bsd.rd: 196+1878672+2663444+0+225844 [75+110592+98669]=0x4c49f0 OpenBSD/armish booting ... initarm: Configuring system ... -physmemory: 32768 pages at 0xa0000000 -> 0xa7ffffff -[ using 209832 bytes of bsd ELF symbol table ] +physmemory: 65536 pages at 0xa0000000 -> 0xafffffff +[ no symbol table formats found ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. -Copyright (c) 1995-2007 OpenBSD. All rights reserved. http://www.OpenBSD.org +Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org -OpenBSD 4.1-current (RAMDISK) #108: Thu Jun 7 22:09:18 MDT 2007 +OpenBSD 4.3 (RAMDISK) #175: Tue Mar 4 21:54:34 MST 2008 deraadt@armish.openbsd.org:/usr/src/sys/arch/armish/compile/RAMDISK -real mem = 134217728 (128MB) -avail mem = 121081856 (115MB) +real mem = 268435456 (256MB) +avail mem = 250630144 (239MB) ... Install(I), Upgrade(U) or Shell(S)? @@ -282,8 +279,8 @@ Update RedBoot non-volatile configuration - continue (y/n)? y --- The important part is that 'Run script' is true and that the commands are -"fis load boot' and 'go' (note that 'boot' is the same as the 'fis create boot' -confirm the update and 'reset' to auto boot. XXX What does that mean?? +'fis load boot' and 'go' ('boot' is the file created by 'fis create boot' +earlier). Confirm the update and type 'reset' to auto boot. The bootloader is command driven with timeout like many other OpenBSD architectures. |