diff options
| -rw-r--r-- | sys/dev/pci/files.pci | 7 | ||||
| -rw-r--r-- | sys/dev/pci/if_stge.c | 2063 | ||||
| -rw-r--r-- | sys/dev/pci/if_stgereg.h | 458 |
3 files changed, 2527 insertions, 1 deletions
diff --git a/sys/dev/pci/files.pci b/sys/dev/pci/files.pci index 8ac3b7c6bd8..a98df1feb45 100644 --- a/sys/dev/pci/files.pci +++ b/sys/dev/pci/files.pci @@ -1,4 +1,4 @@ -# $OpenBSD: files.pci,v 1.119 2001/11/26 16:38:37 mickey Exp $ +# $OpenBSD: files.pci,v 1.120 2001/11/29 21:55:31 nate Exp $ # $NetBSD: files.pci,v 1.20 1996/09/24 17:47:15 christos Exp $ # # Config file and device description for machine-independent PCI code. @@ -421,3 +421,8 @@ file dev/pci/if_lge.c lge device bge: ether, ifnet, mii, ifmedia, mii_phy attach bge at pci file dev/pci/if_bge.c bge + +# Sundance Tech./Tamarack TC9021 Gigabit Ethernet +device stge: ether, ifnet, mii, ifmedia, mii_phy, mii_bitbang +attach stge at pci +file dev/pci/if_stge.c stge diff --git a/sys/dev/pci/if_stge.c b/sys/dev/pci/if_stge.c new file mode 100644 index 00000000000..38d09b25369 --- /dev/null +++ b/sys/dev/pci/if_stge.c @@ -0,0 +1,2063 @@ +/* $NetBSD: if_stge.c,v 1.4 2001/07/25 15:44:48 thorpej Exp $ */ + +/*- + * Copyright (c) 2001 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Jason R. Thorpe. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the NetBSD + * Foundation, Inc. and its contributors. + * 4. Neither the name of The NetBSD Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * Device driver for the Sundance Tech. TC9021 10/100/1000 + * Ethernet controller. + */ + +#include "bpfilter.h" +#include "vlan.h" + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/sockio.h> +#include <sys/mbuf.h> +#include <sys/malloc.h> +#include <sys/kernel.h> +#include <sys/socket.h> +#include <sys/device.h> + +#include <net/if.h> +#include <net/if_dl.h> +#include <net/if_media.h> + +#ifdef INET +#include <netinet/in.h> +#include <netinet/in_systm.h> +#include <netinet/in_var.h> +#include <netinet/ip.h> +#include <netinet/if_ether.h> +#endif + +#if NVLAN > 0 +#include <net/if_types.h> +#include <net/if_vlan_var.h> +#endif + +#if NBPFILTER > 0 +#include <net/bpf.h> +#endif + +#include <dev/pci/pcireg.h> +#include <dev/pci/pcivar.h> +#include <dev/pci/pcidevs.h> + +#include <dev/mii/mii.h> +#include <dev/mii/miivar.h> +#include <dev/mii/mii_bitbang.h> + +#include <dev/pci/if_stgereg.h> + +/* + * Transmit descriptor list size. + */ +#define STGE_NTXDESC 256 +#define STGE_NTXDESC_MASK (STGE_NTXDESC - 1) +#define STGE_NEXTTX(x) (((x) + 1) & STGE_NTXDESC_MASK) + +/* + * Receive descriptor list size. + */ +#define STGE_NRXDESC 256 +#define STGE_NRXDESC_MASK (STGE_NRXDESC - 1) +#define STGE_NEXTRX(x) (((x) + 1) & STGE_NRXDESC_MASK) + +/* + * Only interrupt every N frames. Must be a power-of-two. + */ +#define STGE_TXINTR_SPACING 16 +#define STGE_TXINTR_SPACING_MASK (STGE_TXINTR_SPACING - 1) + +/* + * Control structures are DMA'd to the TC9021 chip. We allocate them in + * a single clump that maps to a single DMA segment to make several things + * easier. + */ +struct stge_control_data { + /* + * The transmit descriptors. + */ + struct stge_tfd scd_txdescs[STGE_NTXDESC]; + + /* + * The receive descriptors. + */ + struct stge_rfd scd_rxdescs[STGE_NRXDESC]; +}; + +#define STGE_CDOFF(x) offsetof(struct stge_control_data, x) +#define STGE_CDTXOFF(x) STGE_CDOFF(scd_txdescs[(x)]) +#define STGE_CDRXOFF(x) STGE_CDOFF(scd_rxdescs[(x)]) + +/* + * Software state for transmit and receive jobs. + */ +struct stge_descsoft { + struct mbuf *ds_mbuf; /* head of our mbuf chain */ + bus_dmamap_t ds_dmamap; /* our DMA map */ +}; + +/* + * Software state per device. + */ +struct stge_softc { + struct device sc_dev; /* generic device information */ + bus_space_tag_t sc_st; /* bus space tag */ + bus_space_handle_t sc_sh; /* bus space handle */ + bus_dma_tag_t sc_dmat; /* bus DMA tag */ + struct arpcom sc_arpcom; /* ethernet common data */ + void *sc_sdhook; /* shutdown hook */ + int sc_rev; /* silicon revision */ + + void *sc_ih; /* interrupt cookie */ + + struct mii_data sc_mii; /* MII/media information */ + + struct timeout sc_timeout; /* tick timeout */ + + bus_dmamap_t sc_cddmamap; /* control data DMA map */ +#define sc_cddma sc_cddmamap->dm_segs[0].ds_addr + + /* + * Software state for transmit and receive descriptors. + */ + struct stge_descsoft sc_txsoft[STGE_NTXDESC]; + struct stge_descsoft sc_rxsoft[STGE_NRXDESC]; + + /* + * Control data structures. + */ + struct stge_control_data *sc_control_data; +#define sc_txdescs sc_control_data->scd_txdescs +#define sc_rxdescs sc_control_data->scd_rxdescs + +#ifdef STGE_EVENT_COUNTERS + /* + * Event counters. + */ + struct evcnt sc_ev_txstall; /* Tx stalled */ + struct evcnt sc_ev_txdmaintr; /* Tx DMA interrupts */ + struct evcnt sc_ev_txindintr; /* Tx Indicate interrupts */ + struct evcnt sc_ev_rxintr; /* Rx interrupts */ + + struct evcnt sc_ev_txseg1; /* Tx packets w/ 1 segment */ + struct evcnt sc_ev_txseg2; /* Tx packets w/ 2 segments */ + struct evcnt sc_ev_txseg3; /* Tx packets w/ 3 segments */ + struct evcnt sc_ev_txseg4; /* Tx packets w/ 4 segments */ + struct evcnt sc_ev_txseg5; /* Tx packets w/ 5 segments */ + struct evcnt sc_ev_txsegmore; /* Tx packets w/ more than 5 segments */ + struct evcnt sc_ev_txcopy; /* Tx packets that we had to copy */ + + struct evcnt sc_ev_rxipsum; /* IP checksums checked in-bound */ + struct evcnt sc_ev_rxtcpsum; /* TCP checksums checked in-bound */ + struct evcnt sc_ev_rxudpsum; /* UDP checksums checked in-bound */ + + struct evcnt sc_ev_txipsum; /* IP checksums comp. out-bound */ + struct evcnt sc_ev_txtcpsum; /* TCP checksums comp. out-bound */ + struct evcnt sc_ev_txudpsum; /* UDP checksums comp. out-bound */ +#endif /* STGE_EVENT_COUNTERS */ + + int sc_txpending; /* number of Tx requests pending */ + int sc_txdirty; /* first dirty Tx descriptor */ + int sc_txlast; /* last used Tx descriptor */ + + int sc_rxptr; /* next ready Rx descriptor/descsoft */ + int sc_rxdiscard; + int sc_rxlen; + struct mbuf *sc_rxhead; + struct mbuf *sc_rxtail; + struct mbuf **sc_rxtailp; + + int sc_txthresh; /* Tx threshold */ + int sc_usefiber; /* if we're fiber */ + uint32_t sc_DMACtrl; /* prototype DMACtrl register */ + uint32_t sc_MACCtrl; /* prototype MacCtrl register */ + uint16_t sc_IntEnable; /* prototype IntEnable register */ + uint16_t sc_ReceiveMode; /* prototype ReceiveMode register */ + uint8_t sc_PhyCtrl; /* prototype PhyCtrl register */ +}; + +#define STGE_RXCHAIN_RESET(sc) \ +do { \ + (sc)->sc_rxtailp = &(sc)->sc_rxhead; \ + *(sc)->sc_rxtailp = NULL; \ + (sc)->sc_rxlen = 0; \ +} while (/*CONSTCOND*/0) + +#define STGE_RXCHAIN_LINK(sc, m) \ +do { \ + *(sc)->sc_rxtailp = (sc)->sc_rxtail = (m); \ + (sc)->sc_rxtailp = &(m)->m_next; \ +} while (/*CONSTCOND*/0) + +#ifdef STGE_EVENT_COUNTERS +#define STGE_EVCNT_INCR(ev) (ev)->ev_count++ +#else +#define STGE_EVCNT_INCR(ev) /* nothing */ +#endif + +#define STGE_CDTXADDR(sc, x) ((sc)->sc_cddma + STGE_CDTXOFF((x))) +#define STGE_CDRXADDR(sc, x) ((sc)->sc_cddma + STGE_CDRXOFF((x))) + +#define STGE_CDTXSYNC(sc, x, ops) \ + bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ + STGE_CDTXOFF((x)), sizeof(struct stge_tfd), (ops)) + +#define STGE_CDRXSYNC(sc, x, ops) \ + bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \ + STGE_CDRXOFF((x)), sizeof(struct stge_rfd), (ops)) + +#define STGE_INIT_RXDESC(sc, x) \ +do { \ + struct stge_descsoft *__ds = &(sc)->sc_rxsoft[(x)]; \ + struct stge_rfd *__rfd = &(sc)->sc_rxdescs[(x)]; \ + \ + /* \ + * Note: We scoot the packet forward 2 bytes in the buffer \ + * so that the payload after the Ethernet header is aligned \ + * to a 4-byte boundary. \ + */ \ + __rfd->rfd_frag.frag_word0 = \ + htole64(FRAG_ADDR(__ds->ds_dmamap->dm_segs[0].ds_addr + 2) |\ + FRAG_LEN(MCLBYTES - 2)); \ + __rfd->rfd_next = \ + htole64((uint64_t)STGE_CDRXADDR((sc), STGE_NEXTRX((x)))); \ + __rfd->rfd_status = 0; \ + STGE_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); \ +} while (/*CONSTCOND*/0) + +#define STGE_TIMEOUT 1000 + +void stge_start(struct ifnet *); +void stge_watchdog(struct ifnet *); +int stge_ioctl(struct ifnet *, u_long, caddr_t); +int stge_init(struct ifnet *); +void stge_stop(struct ifnet *, int); + +void stge_shutdown(void *); + +void stge_reset(struct stge_softc *); +void stge_rxdrain(struct stge_softc *); +int stge_add_rxbuf(struct stge_softc *, int); +#if 0 +void stge_read_eeprom(struct stge_softc *, int, uint16_t *); +#endif +void stge_tick(void *); + +void stge_stats_update(struct stge_softc *); + +void stge_set_filter(struct stge_softc *); + +int stge_intr(void *); +void stge_txintr(struct stge_softc *); +void stge_rxintr(struct stge_softc *); + +int stge_mii_readreg(struct device *, int, int); +void stge_mii_writereg(struct device *, int, int, int); +void stge_mii_statchg(struct device *); + +int stge_mediachange(struct ifnet *); +void stge_mediastatus(struct ifnet *, struct ifmediareq *); + +int stge_match(struct device *, void *, void *); +void stge_attach(struct device *, struct device *, void *); + +int stge_copy_small = 0; + +struct cfattach stge_ca = { + sizeof(struct stge_softc), stge_match, stge_attach, +}; + +struct cfdriver stge_cd = { + 0, "stge", DV_IFNET +}; + +uint32_t stge_mii_bitbang_read(struct device *); +void stge_mii_bitbang_write(struct device *, uint32_t); + +const struct mii_bitbang_ops stge_mii_bitbang_ops = { + stge_mii_bitbang_read, + stge_mii_bitbang_write, + { + PC_MgmtData, /* MII_BIT_MDO */ + PC_MgmtData, /* MII_BIT_MDI */ + PC_MgmtClk, /* MII_BIT_MDC */ + PC_MgmtDir, /* MII_BIT_DIR_HOST_PHY */ + 0, /* MII_BIT_DIR_PHY_HOST */ + } +}; + +/* + * Devices supported by this driver. + */ +const struct stge_product { + pci_vendor_id_t stge_vendor; + pci_product_id_t stge_product; + const char *stge_name; +} stge_products[] = { + { PCI_VENDOR_SUNDANCE, PCI_PRODUCT_SUNDANCE_ST2021, + "Sundance ST-2021 Gigabit Ethernet" }, + + { PCI_VENDOR_TAMARACK, PCI_PRODUCT_TAMARACK_TC9021, + "Tamarack TC9021 Gigabit Ethernet" }, + + { PCI_VENDOR_TAMARACK, PCI_PRODUCT_TAMARACK_TC9021_ALT, + "Tamarack TC9021 Gigabit Ethernet" }, + + /* + * The Sundance sample boards use the Sundance vendor ID, + * but the Tamarack product ID. + */ + { PCI_VENDOR_SUNDANCE, PCI_PRODUCT_TAMARACK_TC9021, + "Sundance TC9021 Gigabit Ethernet" }, + + { PCI_VENDOR_SUNDANCE, PCI_PRODUCT_TAMARACK_TC9021_ALT, + "Sundance TC9021 Gigabit Ethernet" }, + + { PCI_VENDOR_DLINK, PCI_PRODUCT_DLINK_DGE550T, + "D-Link DGE-550T Gigabit Ethernet" }, + + { PCI_VENDOR_ANTARES, PCI_PRODUCT_ANTARES_TC9021, + "Antares Gigabit Ethernet" }, + + { 0, 0, + NULL }, +}; + +static const struct stge_product * +stge_lookup(const struct pci_attach_args *pa) +{ + const struct stge_product *sp; + + for (sp = stge_products; sp->stge_name != NULL; sp++) { + if (PCI_VENDOR(pa->pa_id) == sp->stge_vendor && + PCI_PRODUCT(pa->pa_id) == sp->stge_product) + return (sp); + } + return (NULL); +} + +int +stge_match(struct device *parent, void *match, void *aux) +{ + struct pci_attach_args *pa = (struct pci_attach_args *)aux; + + if (stge_lookup(pa) != NULL) + return (1); + + return (0); +} + +void +stge_attach(struct device *parent, struct device *self, void *aux) +{ + struct stge_softc *sc = (struct stge_softc *) self; + struct pci_attach_args *pa = aux; + struct ifnet *ifp = &sc->sc_arpcom.ac_if; + pci_chipset_tag_t pc = pa->pa_pc; + pci_intr_handle_t ih; + const char *intrstr = NULL; + bus_space_tag_t iot, memt; + bus_space_handle_t ioh, memh; + bus_dma_segment_t seg; + int ioh_valid, memh_valid; + int i, rseg, error; + const struct stge_product *sp; + pcireg_t pmode; + int pmreg; + + timeout_set(&sc->sc_timeout, stge_tick, sc); + + sp = stge_lookup(pa); + if (sp == NULL) { + printf("\n"); + panic("ste_attach: impossible"); + } + + sc->sc_rev = PCI_REVISION(pa->pa_class); + + printf(": %s, rev. %d\n", sp->stge_name, sc->sc_rev); + + /* + * Map the device. + */ + ioh_valid = (pci_mapreg_map(pa, STGE_PCI_IOBA, + PCI_MAPREG_TYPE_IO, 0, + &iot, &ioh, NULL, NULL, 0) == 0); + memh_valid = (pci_mapreg_map(pa, STGE_PCI_MMBA, + PCI_MAPREG_TYPE_MEM|PCI_MAPREG_MEM_TYPE_32BIT, 0, + &memt, &memh, NULL, NULL, 0) == 0); + + if (memh_valid) { + sc->sc_st = memt; + sc->sc_sh = memh; + } else if (ioh_valid) { + sc->sc_st = iot; + sc->sc_sh = ioh; + } else { + printf("%s: unable to map device registers\n", + sc->sc_dev.dv_xname); + return; + } + + sc->sc_dmat = pa->pa_dmat; + + /* Enable bus mastering. */ + pci_conf_write(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, + pci_conf_read(pc, pa->pa_tag, PCI_COMMAND_STATUS_REG) | + PCI_COMMAND_MASTER_ENABLE); + + /* Get it out of power save mode if needed. */ + if (pci_get_capability(pc, pa->pa_tag, PCI_CAP_PWRMGMT, &pmreg, 0)) { + pmode = pci_conf_read(pc, pa->pa_tag, pmreg + 4) & 0x3; + if (pmode == 3) { + /* + * The card has lost all configuration data in + * this state, so punt. + */ + printf("%s: unable to wake up from power state D3\n", + sc->sc_dev.dv_xname); + return; + } + if (pmode != 0) { + printf("%s: waking up from power state D%d\n", + sc->sc_dev.dv_xname, pmode); + pci_conf_write(pc, pa->pa_tag, pmreg + 4, 0); + } + } + + /* + * Map and establish our interrupt. + */ + if (pci_intr_map(pa, &ih)) { + printf("%s: unable to map interrupt\n", sc->sc_dev.dv_xname); + return; + } + intrstr = pci_intr_string(pc, ih); + sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, stge_intr, sc, + sc->sc_dev.dv_xname); + if (sc->sc_ih == NULL) { + printf("%s: unable to establish interrupt", + sc->sc_dev.dv_xname); + if (intrstr != NULL) + printf(" at %s", intrstr); + printf("\n"); + return; + } + printf("%s: interrupting at %s\n", sc->sc_dev.dv_xname, intrstr); + + /* + * Allocate the control data structures, and create and load the + * DMA map for it. + */ + if ((error = bus_dmamem_alloc(sc->sc_dmat, + sizeof(struct stge_control_data), PAGE_SIZE, 0, &seg, 1, &rseg, + 0)) != 0) { + printf("%s: unable to allocate control data, error = %d\n", + sc->sc_dev.dv_xname, error); + goto fail_0; + } + + if ((error = bus_dmamem_map(sc->sc_dmat, &seg, rseg, + sizeof(struct stge_control_data), (caddr_t *)&sc->sc_control_data, + BUS_DMA_COHERENT)) != 0) { + printf("%s: unable to map control data, error = %d\n", + sc->sc_dev.dv_xname, error); + goto fail_1; + } + + if ((error = bus_dmamap_create(sc->sc_dmat, + sizeof(struct stge_control_data), 1, + sizeof(struct stge_control_data), 0, 0, &sc->sc_cddmamap)) != 0) { + printf("%s: unable to create control data DMA map, " + "error = %d\n", sc->sc_dev.dv_xname, error); + goto fail_2; + } + + if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap, + sc->sc_control_data, sizeof(struct stge_control_data), NULL, + 0)) != 0) { + printf("%s: unable to load control data DMA map, error = %d\n", + sc->sc_dev.dv_xname, error); + goto fail_3; + } + + /* + * Create the transmit buffer DMA maps. Note that rev B.3 + * and earlier seem to have a bug regarding multi-fragment + * packets. We need to limit the number of Tx segments on + * such chips to 1. + */ + for (i = 0; i < STGE_NTXDESC; i++) { + if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, + STGE_NTXFRAGS, MCLBYTES, 0, 0, + &sc->sc_txsoft[i].ds_dmamap)) != 0) { + printf("%s: unable to create tx DMA map %d, " + "error = %d\n", sc->sc_dev.dv_xname, i, error); + goto fail_4; + } + } + + /* + * Create the receive buffer DMA maps. + */ + for (i = 0; i < STGE_NRXDESC; i++) { + if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, + MCLBYTES, 0, 0, &sc->sc_rxsoft[i].ds_dmamap)) != 0) { + printf("%s: unable to create rx DMA map %d, " + "error = %d\n", sc->sc_dev.dv_xname, i, error); + goto fail_5; + } + sc->sc_rxsoft[i].ds_mbuf = NULL; + } + + /* + * Determine if we're copper or fiber. It affects how we + * reset the card. + */ + if (bus_space_read_4(sc->sc_st, sc->sc_sh, STGE_AsicCtrl) & + AC_PhyMedia) + sc->sc_usefiber = 1; + else + sc->sc_usefiber = 0; + + /* + * Reset the chip to a known state. + */ + stge_reset(sc); + + /* + * Reading the station address from the EEPROM doesn't seem + * to work, at least on my sample boards. Instread, since + * the reset sequence does AutoInit, read it from the station + * address registers. + */ + sc->sc_arpcom.ac_enaddr[0] = bus_space_read_2(sc->sc_st, sc->sc_sh, + STGE_StationAddress0) & 0xff; + sc->sc_arpcom.ac_enaddr[1] = bus_space_read_2(sc->sc_st, sc->sc_sh, + STGE_StationAddress0) >> 8; + sc->sc_arpcom.ac_enaddr[2] = bus_space_read_2(sc->sc_st, sc->sc_sh, + STGE_StationAddress1) & 0xff; + sc->sc_arpcom.ac_enaddr[3] = bus_space_read_2(sc->sc_st, sc->sc_sh, + STGE_StationAddress1) >> 8; + sc->sc_arpcom.ac_enaddr[4] = bus_space_read_2(sc->sc_st, sc->sc_sh, + STGE_StationAddress2) & 0xff; + sc->sc_arpcom.ac_enaddr[5] = bus_space_read_2(sc->sc_st, sc->sc_sh, + STGE_StationAddress2) >> 8; + + printf("%s: Ethernet address %s\n", sc->sc_dev.dv_xname, + ether_sprintf(sc->sc_arpcom.ac_enaddr)); + + /* + * Read some important bits from the PhyCtrl register. + */ + sc->sc_PhyCtrl = bus_space_read_1(sc->sc_st, sc->sc_sh, + STGE_PhyCtrl) & (PC_PhyDuplexPolarity | PC_PhyLnkPolarity); + + /* + * Initialize our media structures and probe the MII. + */ + sc->sc_mii.mii_ifp = ifp; + sc->sc_mii.mii_readreg = stge_mii_readreg; + sc->sc_mii.mii_writereg = stge_mii_writereg; + sc->sc_mii.mii_statchg = stge_mii_statchg; + ifmedia_init(&sc->sc_mii.mii_media, 0, stge_mediachange, + stge_mediastatus); + mii_attach(&sc->sc_dev, &sc->sc_mii, 0xffffffff, MII_PHY_ANY, + MII_OFFSET_ANY, 0 /* MIIF_DOPAUSE */); + if (LIST_FIRST(&sc->sc_mii.mii_phys) == NULL) { + ifmedia_add(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE, 0, NULL); + ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_NONE); + } else + ifmedia_set(&sc->sc_mii.mii_media, IFM_ETHER|IFM_AUTO); + + ifp = &sc->sc_arpcom.ac_if; + strcpy(ifp->if_xname, sc->sc_dev.dv_xname); + ifp->if_softc = sc; + ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; + ifp->if_ioctl = stge_ioctl; + ifp->if_start = stge_start; + ifp->if_watchdog = stge_watchdog; +#ifdef fake + ifp->if_init = stge_init; + ifp->if_stop = stge_stop; +#endif + IFQ_SET_READY(&ifp->if_snd); + + /* + * The manual recommends disabling early transmit, so we + * do. It's disabled anyway, if using IP checksumming, + * since the entire packet must be in the FIFO in order + * for the chip to perform the checksum. + */ + sc->sc_txthresh = 0x0fff; + + /* + * Disable MWI if the PCI layer tells us to. + */ + sc->sc_DMACtrl = 0; +#ifdef fake + if ((pa->pa_flags & PCI_FLAGS_MWI_OKAY) == 0) + sc->sc_DMACtrl |= DMAC_MWIDisable; +#endif + +#ifdef fake + /* + * We can support 802.1Q VLAN-sized frames and jumbo + * Ethernet frames. + * + * XXX Figure out how to do hw-assisted VLAN tagging in + * XXX a reasonable way on this chip. + */ + sc->sc_arpcom.ac_capabilities |= + ETHERCAP_VLAN_MTU /* XXX | ETHERCAP_JUMBO_MTU */; +#endif + +#ifdef STGE_CHECKSUM + /* + * We can do IPv4/TCPv4/UDPv4 checksums in hardware. + */ + sc->sc_arpcom.ac_if.if_capabilities |= IFCAP_CSUM_IPv4 | + IFCAP_CSUM_TCPv4 | IFCAP_CSUM_UDPv4; +#endif + + /* + * Attach the interface. + */ + if_attach(ifp); + ether_ifattach(ifp); + +#ifdef STGE_EVENT_COUNTERS + /* + * Attach event counters. + */ + evcnt_attach_dynamic(&sc->sc_ev_txstall, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "txstall"); + evcnt_attach_dynamic(&sc->sc_ev_txdmaintr, EVCNT_TYPE_INTR, + NULL, sc->sc_dev.dv_xname, "txdmaintr"); + evcnt_attach_dynamic(&sc->sc_ev_txindintr, EVCNT_TYPE_INTR, + NULL, sc->sc_dev.dv_xname, "txindintr"); + evcnt_attach_dynamic(&sc->sc_ev_rxintr, EVCNT_TYPE_INTR, + NULL, sc->sc_dev.dv_xname, "rxintr"); + + evcnt_attach_dynamic(&sc->sc_ev_txseg1, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "txseg1"); + evcnt_attach_dynamic(&sc->sc_ev_txseg2, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "txseg2"); + evcnt_attach_dynamic(&sc->sc_ev_txseg3, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "txseg3"); + evcnt_attach_dynamic(&sc->sc_ev_txseg4, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "txseg4"); + evcnt_attach_dynamic(&sc->sc_ev_txseg5, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "txseg5"); + evcnt_attach_dynamic(&sc->sc_ev_txsegmore, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "txsegmore"); + evcnt_attach_dynamic(&sc->sc_ev_txcopy, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "txcopy"); + + evcnt_attach_dynamic(&sc->sc_ev_rxipsum, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "rxipsum"); + evcnt_attach_dynamic(&sc->sc_ev_rxtcpsum, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "rxtcpsum"); + evcnt_attach_dynamic(&sc->sc_ev_rxudpsum, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "rxudpsum"); + evcnt_attach_dynamic(&sc->sc_ev_txipsum, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "txipsum"); + evcnt_attach_dynamic(&sc->sc_ev_txtcpsum, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "txtcpsum"); + evcnt_attach_dynamic(&sc->sc_ev_txudpsum, EVCNT_TYPE_MISC, + NULL, sc->sc_dev.dv_xname, "txudpsum"); +#endif /* STGE_EVENT_COUNTERS */ + + /* + * Make sure the interface is shutdown during reboot. + */ + sc->sc_sdhook = shutdownhook_establish(stge_shutdown, sc); + if (sc->sc_sdhook == NULL) + printf("%s: WARNING: unable to establish shutdown hook\n", + sc->sc_dev.dv_xname); + return; + + /* + * Free any resources we've allocated during the failed attach + * attempt. Do this in reverse order and fall through. + */ + fail_5: + for (i = 0; i < STGE_NRXDESC; i++) { + if (sc->sc_rxsoft[i].ds_dmamap != NULL) + bus_dmamap_destroy(sc->sc_dmat, + sc->sc_rxsoft[i].ds_dmamap); + } + fail_4: + for (i = 0; i < STGE_NTXDESC; i++) { + if (sc->sc_txsoft[i].ds_dmamap != NULL) + bus_dmamap_destroy(sc->sc_dmat, + sc->sc_txsoft[i].ds_dmamap); + } + bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap); + fail_3: + bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap); + fail_2: + bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_control_data, + sizeof(struct stge_control_data)); + fail_1: + bus_dmamem_free(sc->sc_dmat, &seg, rseg); + fail_0: + return; +} + +/* + * stge_shutdown: + * + * Make sure the interface is stopped at reboot time. + */ +void +stge_shutdown(void *arg) +{ + struct stge_softc *sc = arg; + + stge_stop(&sc->sc_arpcom.ac_if, 1); +} + +static void +stge_dma_wait(struct stge_softc *sc) +{ + int i; + + for (i = 0; i < STGE_TIMEOUT; i++) { + delay(2); + if ((bus_space_read_4(sc->sc_st, sc->sc_sh, STGE_DMACtrl) & + DMAC_TxDMAInProg) == 0) + break; + } + + if (i == STGE_TIMEOUT) + printf("%s: DMA wait timed out\n", sc->sc_dev.dv_xname); +} + +/* + * stge_start: [ifnet interface function] + * + * Start packet transmission on the interface. + */ +void +stge_start(struct ifnet *ifp) +{ + struct stge_softc *sc = ifp->if_softc; + struct mbuf *m0; + struct stge_descsoft *ds; + struct stge_tfd *tfd; + bus_dmamap_t dmamap; + int error, firsttx, nexttx, opending, seg, totlen; + uint64_t csum_flags = 0; + + if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING) + return; + + /* + * Remember the previous number of pending transmissions + * and the first descriptor we will use. + */ + opending = sc->sc_txpending; + firsttx = STGE_NEXTTX(sc->sc_txlast); + + /* + * Loop through the send queue, setting up transmit descriptors + * until we drain the queue, or use up all available transmit + * descriptors. + */ + for (;;) { + /* + * Grab a packet off the queue. + */ + IFQ_POLL(&ifp->if_snd, m0); + if (m0 == NULL) + break; + + /* + * Leave one unused descriptor at the end of the + * list to prevent wrapping completely around. + */ + if (sc->sc_txpending == (STGE_NTXDESC - 1)) { + STGE_EVCNT_INCR(&sc->sc_ev_txstall); + break; + } + + /* + * Get the last and next available transmit descriptor. + */ + nexttx = STGE_NEXTTX(sc->sc_txlast); + tfd = &sc->sc_txdescs[nexttx]; + ds = &sc->sc_txsoft[nexttx]; + + dmamap = ds->ds_dmamap; + + /* + * Load the DMA map. If this fails, the packet either + * didn't fit in the alloted number of segments, or we + * were short on resources. For the too-may-segments + * case, we simply report an error and drop the packet, + * since we can't sanely copy a jumbo packet to a single + * buffer. + */ + error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, + BUS_DMA_NOWAIT); + if (error) { + if (error == EFBIG) { + printf("%s: Tx packet consumes too many " + "DMA segments, dropping...\n", + sc->sc_dev.dv_xname); + IFQ_DEQUEUE(&ifp->if_snd, m0); + m_freem(m0); + continue; + } + /* + * Short on resources, just stop for now. + */ + break; + } + + IFQ_DEQUEUE(&ifp->if_snd, m0); + + /* + * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET. + */ + + /* Sync the DMA map. */ + bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, + BUS_DMASYNC_PREWRITE); + + /* Initialize the fragment list. */ + for (totlen = 0, seg = 0; seg < dmamap->dm_nsegs; seg++) { + tfd->tfd_frags[seg].frag_word0 = + htole64(FRAG_ADDR(dmamap->dm_segs[seg].ds_addr) | + FRAG_LEN(dmamap->dm_segs[seg].ds_len)); + totlen += dmamap->dm_segs[seg].ds_len; + } + +#ifdef STGE_EVENT_COUNTERS + switch (dmamap->dm_nsegs) { + case 1: + STGE_EVCNT_INCR(&sc->sc_ev_txseg1); + break; + case 2: + STGE_EVCNT_INCR(&sc->sc_ev_txseg2); + break; + case 3: + STGE_EVCNT_INCR(&sc->sc_ev_txseg3); + break; + case 4: + STGE_EVCNT_INCR(&sc->sc_ev_txseg4); + break; + case 5: + STGE_EVCNT_INCR(&sc->sc_ev_txseg5); + break; + default: + STGE_EVCNT_INCR(&sc->sc_ev_txsegmore); + break; + } +#endif /* STGE_EVENT_COUNTERS */ + +#ifdef STGE_CHECKSUM + /* + * Initialize checksumming flags in the descriptor. + * Byte-swap constants so the compiler can optimize. + */ + if (m0->m_pkthdr.csum & M_IPV4_CSUM_OUT) { + STGE_EVCNT_INCR(&sc->sc_ev_txipsum); + csum_flags |= htole64(TFD_IPChecksumEnable); + } + + if (m0->m_pkthdr.csum & M_TCPV4_CSUM_OUT) { + STGE_EVCNT_INCR(&sc->sc_ev_txtcpsum); + csum_flags |= htole64(TFD_TCPChecksumEnable); + } + else if (m0->m_pkthdr.csum & M_UDPV4_CSUM_OUT) { + STGE_EVCNT_INCR(&sc->sc_ev_txudpsum); + csum_flags |= htole64(TFD_UDPChecksumEnable); + } +#endif + + /* + * Initialize the descriptor and give it to the chip. + */ + tfd->tfd_control = htole64(TFD_FrameId(nexttx) | + TFD_WordAlign(/*totlen & */3) | + TFD_FragCount(seg) | csum_flags | + (((nexttx & STGE_TXINTR_SPACING_MASK) == 0) ? + TFD_TxDMAIndicate : 0)); + + /* Sync the descriptor. */ + STGE_CDTXSYNC(sc, nexttx, + BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); + + /* + * Kick the transmit DMA logic. + */ + bus_space_write_4(sc->sc_st, sc->sc_sh, STGE_DMACtrl, + sc->sc_DMACtrl | DMAC_TxDMAPollNow); + + /* + * Store a pointer to the packet so we can free it later. + */ + ds->ds_mbuf = m0; + + /* Advance the tx pointer. */ + sc->sc_txpending++; + sc->sc_txlast = nexttx; + +#if NBPFILTER > 0 + /* + * Pass the packet to any BPF listeners. + */ + if (ifp->if_bpf) + bpf_mtap(ifp->if_bpf, m0); +#endif /* NBPFILTER > 0 */ + } + + if (sc->sc_txpending == (STGE_NTXDESC - 1)) { + /* No more slots left; notify upper layer. */ + ifp->if_flags |= IFF_OACTIVE; + } + + if (sc->sc_txpending != opending) { + /* + * We enqueued packets. If the transmitter was idle, + * reset the txdirty pointer. + */ + if (opending == 0) + sc->sc_txdirty = firsttx; + + /* Set a watchdog timer in case the chip flakes out. */ + ifp->if_timer = 5; + } +} + +/* + * stge_watchdog: [ifnet interface function] + * + * Watchdog timer handler. + */ +void +stge_watchdog(struct ifnet *ifp) +{ + struct stge_softc *sc = ifp->if_softc; + + /* + * Sweep up first, since we don't interrupt every frame. + */ + stge_txintr(sc); + if (sc->sc_txpending != 0) { + printf("%s: device timeout\n", sc->sc_dev.dv_xname); + ifp->if_oerrors++; + + (void) stge_init(ifp); + + /* Try to get more packets going. */ + stge_start(ifp); + } +} + +/* + * stge_ioctl: [ifnet interface function] + * + * Handle control requests from the operator. + */ +int +stge_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data) +{ + struct stge_softc *sc = ifp->if_softc; + struct ifreq *ifr = (struct ifreq *)data; + struct ifaddr *ifa = (struct ifaddr *)data; + int s, error; + + s = splnet(); + + if ((error = ether_ioctl(ifp, &sc->sc_arpcom, cmd, data)) > 0) { + splx(s); + return (error); + } + + switch (cmd) { + case SIOCSIFADDR: + ifp->if_flags |= IFF_UP; + + switch (ifa->ifa_addr->sa_family) { +#ifdef INET + case AF_INET: + stge_init(ifp); + arp_ifinit(&sc->sc_arpcom, ifa); + break; +#endif +#ifdef NS + case AF_NS: + { + register struct ns_addr *ina = &IA_SNS(ifa)->sns_addr; + + if (ns_nullhost(*ina)) + ina->x_host = (union ns_host *) + &sc->sc_arpcom.ac_enaddr; + else + bcopy(ina->x_host.c_host, + &sc->sc_arpcom.ac_enaddr, + ifp->if_addrlen); + /* Set new address. */ + stge_init(ifp); + break; + } +#endif + default: + stge_init(ifp); + break; + } + break; + + case SIOCSIFMTU: + if (ifr->ifr_mtu > ETHERMTU || ifr->ifr_mtu < ETHERMIN) { + error = EINVAL; + } else if (ifp->if_mtu != ifr->ifr_mtu) { + ifp->if_mtu = ifr->ifr_mtu; + } + break; + + case SIOCSIFFLAGS: + /* + * If interface is marked up and not running, then start it. + * If it is marked down and running, stop it. + * XXX If it's up then re-initialize it. This is so flags + * such as IFF_PROMISC are handled. + */ + if (ifp->if_flags & IFF_UP) + stge_init(ifp); + else if (ifp->if_flags & IFF_RUNNING) + stge_stop(ifp, 1); + break; + + case SIOCADDMULTI: + case SIOCDELMULTI: + error = (cmd == SIOCADDMULTI) ? + ether_addmulti(ifr, &sc->sc_arpcom) : + ether_delmulti(ifr, &sc->sc_arpcom); + if (error == ENETRESET) { + /* + * Multicast list has changed; set the hardware + * filter accordingly. + */ + stge_init(ifp); + error = 0; + } + break; + + case SIOCSIFMEDIA: + case SIOCGIFMEDIA: + error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd); + break; + + default: + error = EINVAL; + } + + splx(s); + return (error); +} + +/* + * stge_intr: + * + * Interrupt service routine. + */ +int +stge_intr(void *arg) +{ + struct stge_softc *sc = arg; + struct ifnet *ifp = &sc->sc_arpcom.ac_if; + uint32_t txstat; + int wantinit; + uint16_t isr; + + if ((bus_space_read_2(sc->sc_st, sc->sc_sh, STGE_IntStatus) & + IS_InterruptStatus) == 0) + return (0); + + for (wantinit = 0; wantinit == 0;) { + isr = bus_space_read_2(sc->sc_st, sc->sc_sh, STGE_IntStatusAck); + if ((isr & sc->sc_IntEnable) == 0) + break; + + /* Receive interrupts. */ + if (isr & (IE_RxDMAComplete|IE_RFDListEnd)) { + STGE_EVCNT_INCR(&sc->sc_ev_rxintr); + stge_rxintr(sc); + if (isr & IE_RFDListEnd) { + printf("%s: receive ring overflow\n", + sc->sc_dev.dv_xname); + /* + * XXX Should try to recover from this + * XXX more gracefully. + */ + wantinit = 1; + } + } + + /* Transmit interrupts. */ + if (isr & (IE_TxDMAComplete|IE_TxComplete)) { +#ifdef STGE_EVENT_COUNTERS + if (isr & IE_TxDMAComplete) + STGE_EVCNT_INCR(&sc->sc_ev_txdmaintr); +#endif + stge_txintr(sc); + } + + /* Statistics overflow. */ + if (isr & IE_UpdateStats) + stge_stats_update(sc); + + /* Transmission errors. */ + if (isr & IE_TxComplete) { + STGE_EVCNT_INCR(&sc->sc_ev_txindintr); + for (;;) { + txstat = bus_space_read_4(sc->sc_st, sc->sc_sh, + STGE_TxStatus); + if ((txstat & TS_TxComplete) == 0) + break; + if (txstat & TS_TxUnderrun) { + sc->sc_txthresh++; + if (sc->sc_txthresh > 0x0fff) + sc->sc_txthresh = 0x0fff; + printf("%s: transmit underrun, new " + "threshold: %d bytes\n", + sc->sc_dev.dv_xname, + sc->sc_txthresh << 5); + } + if (txstat & TS_MaxCollisions) + printf("%s: excessive collisions\n", + sc->sc_dev.dv_xname); + } + wantinit = 1; + } + + /* Host interface errors. */ + if (isr & IE_HostError) { + printf("%s: Host interface error\n", + sc->sc_dev.dv_xname); + wantinit = 1; + } + } + + if (wantinit) + stge_init(ifp); + + bus_space_write_2(sc->sc_st, sc->sc_sh, STGE_IntEnable, + sc->sc_IntEnable); + + /* Try to get more packets going. */ + stge_start(ifp); + + return (1); +} + +/* + * stge_txintr: + * + * Helper; handle transmit interrupts. + */ +void +stge_txintr(struct stge_softc *sc) +{ + struct ifnet *ifp = &sc->sc_arpcom.ac_if; + struct stge_descsoft *ds; + uint64_t control; + int i; + + ifp->if_flags &= ~IFF_OACTIVE; + + /* + * Go through our Tx list and free mbufs for those + * frames which have been transmitted. + */ + for (i = sc->sc_txdirty; sc->sc_txpending != 0; + i = STGE_NEXTTX(i), sc->sc_txpending--) { + ds = &sc->sc_txsoft[i]; + + STGE_CDTXSYNC(sc, i, + BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); + + control = letoh64(sc->sc_txdescs[i].tfd_control); + if ((control & TFD_TFDDone) == 0) + break; + + bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, + 0, ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE); + bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap); + m_freem(ds->ds_mbuf); + ds->ds_mbuf = NULL; + } + + /* Update the dirty transmit buffer pointer. */ + sc->sc_txdirty = i; + + /* + * If there are no more pending transmissions, cancel the watchdog + * timer. + */ + if (sc->sc_txpending == 0) + ifp->if_timer = 0; +} + +/* + * stge_rxintr: + * + * Helper; handle receive interrupts. + */ +void +stge_rxintr(struct stge_softc *sc) +{ + struct ifnet *ifp = &sc->sc_arpcom.ac_if; + struct stge_descsoft *ds; + struct mbuf *m, *tailm; + uint64_t status; + int i, len; + + for (i = sc->sc_rxptr;; i = STGE_NEXTRX(i)) { + ds = &sc->sc_rxsoft[i]; + + STGE_CDRXSYNC(sc, i, + BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE); + + status = letoh64(sc->sc_rxdescs[i].rfd_status); + + if ((status & RFD_RFDDone) == 0) + break; + + if (__predict_false(sc->sc_rxdiscard)) { + STGE_INIT_RXDESC(sc, i); + if (status & RFD_FrameEnd) { + /* Reset our state. */ + sc->sc_rxdiscard = 0; + } + continue; + } + + bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0, + ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD); + + m = ds->ds_mbuf; + + /* + * Add a new receive buffer to the ring. + */ + if (stge_add_rxbuf(sc, i) != 0) { + /* + * Failed, throw away what we've done so + * far, and discard the rest of the packet. + */ + ifp->if_ierrors++; + bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0, + ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD); + STGE_INIT_RXDESC(sc, i); + if ((status & RFD_FrameEnd) == 0) + sc->sc_rxdiscard = 1; + if (sc->sc_rxhead != NULL) + m_freem(sc->sc_rxhead); + STGE_RXCHAIN_RESET(sc); + continue; + } + +#ifdef DIAGNOSTIC + if (status & RFD_FrameStart) { + KASSERT(sc->sc_rxhead == NULL); + KASSERT(sc->sc_rxtailp == &sc->sc_rxhead); + } +#endif + + STGE_RXCHAIN_LINK(sc, m); + + /* + * If this is not the end of the packet, keep + * looking. + */ + if ((status & RFD_FrameEnd) == 0) { + sc->sc_rxlen += m->m_len; + continue; + } + + /* + * Okay, we have the entire packet now... + */ + *sc->sc_rxtailp = NULL; + m = sc->sc_rxhead; + tailm = sc->sc_rxtail; + + STGE_RXCHAIN_RESET(sc); + + /* + * If the packet had an error, drop it. Note we + * count the error later in the periodic stats update. + */ + if (status & (RFD_RxFIFOOverrun | RFD_RxRuntFrame | + RFD_RxAlignmentError | RFD_RxFCSError | + RFD_RxLengthError)) { + m_freem(m); + continue; + } + + /* + * No errors. + * + * Note we have configured the chip to not include + * the CRC at the end of the packet. + */ + len = RFD_RxDMAFrameLen(status); + tailm->m_len = len - sc->sc_rxlen; + + /* + * If the packet is small enough to fit in a + * single header mbuf, allocate one and copy + * the data into it. This greatly reduces + * memory consumption when we receive lots + * of small packets. + */ + if (stge_copy_small != 0 && len <= (MHLEN - 2)) { + struct mbuf *nm; + MGETHDR(nm, M_DONTWAIT, MT_DATA); + if (nm == NULL) { + ifp->if_ierrors++; + m_freem(m); + continue; + } + nm->m_data += 2; + nm->m_pkthdr.len = nm->m_len = len; + m_copydata(m, 0, len, mtod(nm, caddr_t)); + m_freem(m); + m = nm; + } + +#ifdef STGE_CHECKSUM + /* + * Set the incoming checksum information for the packet. + */ + if (status & RFD_IPDetected) { + STGE_EVCNT_INCR(&sc->sc_ev_rxipsum); + m->m_pkthdr.csum |= (status & RFD_IPError) ? + M_IPV4_CSUM_IN_BAD : M_IPV4_CSUM_IN_OK; + if (status & RFD_TCPDetected) { + STGE_EVCNT_INCR(&sc->sc_ev_rxtcpsum); + m->m_pkthdr.csum |= (status & RFD_TCPError) ? + M_TCP_CSUM_IN_BAD : M_TCP_CSUM_IN_OK; + } else if (status & RFD_UDPDetected) { + STGE_EVCNT_INCR(&sc->sc_ev_rxudpsum); + m->m_pkthdr.csum |= (status & RFD_UDPError) ? + M_UDP_CSUM_IN_BAD : M_UDP_CSUM_IN_OK; + } + } +#endif + + m->m_pkthdr.rcvif = ifp; + m->m_pkthdr.len = len; + +#if NBPFILTER > 0 + /* + * Pass this up to any BPF listeners, but only + * pass if up the stack if it's for us. + */ + if (ifp->if_bpf) + bpf_mtap(ifp->if_bpf, m); +#endif /* NBPFILTER > 0 */ + + /* Pass it on. */ + ether_input_mbuf(ifp, m); + } + + /* Update the receive pointer. */ + sc->sc_rxptr = i; +} + +/* + * stge_tick: + * + * One second timer, used to tick the MII. + */ +void +stge_tick(void *arg) +{ + struct stge_softc *sc = arg; + int s; + + s = splnet(); + mii_tick(&sc->sc_mii); + stge_stats_update(sc); + splx(s); + + timeout_add(&sc->sc_timeout, hz); +} + +/* + * stge_stats_update: + * + * Read the TC9021 statistics counters. + */ +void +stge_stats_update(struct stge_softc *sc) +{ + struct ifnet *ifp = &sc->sc_arpcom.ac_if; + bus_space_tag_t st = sc->sc_st; + bus_space_handle_t sh = sc->sc_sh; + + (void) bus_space_read_4(st, sh, STGE_OctetRcvOk); + + ifp->if_ipackets += + bus_space_read_4(st, sh, STGE_FramesRcvdOk); + + ifp->if_ierrors += + (u_int) bus_space_read_2(st, sh, STGE_FramesLostRxErrors); + + (void) bus_space_read_4(st, sh, STGE_OctetXmtdOk); + + ifp->if_opackets += + bus_space_read_4(st, sh, STGE_FramesXmtdOk); + + ifp->if_collisions += + bus_space_read_4(st, sh, STGE_LateCollisions) + + bus_space_read_4(st, sh, STGE_MultiColFrames) + + bus_space_read_4(st, sh, STGE_SingleColFrames); + + ifp->if_oerrors += + (u_int) bus_space_read_2(st, sh, STGE_FramesAbortXSColls) + + (u_int) bus_space_read_2(st, sh, STGE_FramesWEXDeferal); +} + +/* + * stge_reset: + * + * Perform a soft reset on the TC9021. + */ +void +stge_reset(struct stge_softc *sc) +{ + uint32_t ac; + int i; + + ac = bus_space_read_4(sc->sc_st, sc->sc_sh, STGE_AsicCtrl); + + /* + * Only assert RstOut if we're fiber. We need GMII clocks + * to be present in order for the reset to complete on fiber + * cards. + */ + bus_space_write_4(sc->sc_st, sc->sc_sh, STGE_AsicCtrl, + ac | AC_GlobalReset | AC_RxReset | AC_TxReset | + AC_DMA | AC_FIFO | AC_Network | AC_Host | AC_AutoInit | + (sc->sc_usefiber ? AC_RstOut : 0)); + + delay(50000); + + for (i = 0; i < STGE_TIMEOUT; i++) { + delay(5000); + if ((bus_space_read_4(sc->sc_st, sc->sc_sh, STGE_AsicCtrl) & + AC_ResetBusy) == 0) + break; + } + + if (i == STGE_TIMEOUT) + printf("%s: reset failed to complete\n", sc->sc_dev.dv_xname); + + delay(1000); +} + +/* + * stge_init: [ ifnet interface function ] + * + * Initialize the interface. Must be called at splnet(). + */ +int +stge_init(struct ifnet *ifp) +{ + struct stge_softc *sc = ifp->if_softc; + bus_space_tag_t st = sc->sc_st; + bus_space_handle_t sh = sc->sc_sh; + struct stge_descsoft *ds; + int i, error = 0; + + /* + * Cancel any pending I/O. + */ + stge_stop(ifp, 0); + + /* + * Reset the chip to a known state. + */ + stge_reset(sc); + + /* + * Initialize the transmit descriptor ring. + */ + memset(sc->sc_txdescs, 0, sizeof(sc->sc_txdescs)); + for (i = 0; i < STGE_NTXDESC; i++) { + sc->sc_txdescs[i].tfd_next = + (uint64_t) STGE_CDTXADDR(sc, STGE_NEXTTX(i)); + sc->sc_txdescs[i].tfd_control = htole64(TFD_TFDDone); + } + sc->sc_txpending = 0; + sc->sc_txdirty = 0; + sc->sc_txlast = STGE_NTXDESC - 1; + + /* + * Initialize the receive descriptor and receive job + * descriptor rings. + */ + for (i = 0; i < STGE_NRXDESC; i++) { + ds = &sc->sc_rxsoft[i]; + if (ds->ds_mbuf == NULL) { + if ((error = stge_add_rxbuf(sc, i)) != 0) { + printf("%s: unable to allocate or map rx " + "buffer %d, error = %d\n", + sc->sc_dev.dv_xname, i, error); + /* + * XXX Should attempt to run with fewer receive + * XXX buffers instead of just failing. + */ + stge_rxdrain(sc); + goto out; + } + } else + STGE_INIT_RXDESC(sc, i); + } + sc->sc_rxptr = 0; + sc->sc_rxdiscard = 0; + STGE_RXCHAIN_RESET(sc); + + /* Set the station address. */ + bus_space_write_2(st, sh, STGE_StationAddress0, + sc->sc_arpcom.ac_enaddr[0] | sc->sc_arpcom.ac_enaddr[1] << 8); + bus_space_write_2(st, sh, STGE_StationAddress1, + sc->sc_arpcom.ac_enaddr[2] | sc->sc_arpcom.ac_enaddr[3] << 8); + bus_space_write_2(st, sh, STGE_StationAddress2, + sc->sc_arpcom.ac_enaddr[4] | sc->sc_arpcom.ac_enaddr[5] << 8); + + /* + * Set the statistics masks. Disable all the RMON stats, + * and disable selected stats in the non-RMON stats registers. + */ + bus_space_write_4(st, sh, STGE_RMONStatisticsMask, 0xffffffff); + bus_space_write_4(st, sh, STGE_StatisticsMask, + (1U << 1) | (1U << 2) | (1U << 3) | (1U << 4) | (1U << 5) | + (1U << 6) | (1U << 7) | (1U << 8) | (1U << 9) | (1U << 10) | + (1U << 13) | (1U << 14) | (1U << 15) | (1U << 19) | (1U << 20) | + (1U << 21)); + + /* Set up the receive filter. */ + stge_set_filter(sc); + + /* + * Give the transmit and receive ring to the chip. + */ + bus_space_write_4(st, sh, STGE_TFDListPtrHi, 0); /* NOTE: 32-bit DMA */ + bus_space_write_4(st, sh, STGE_TFDListPtrLo, + STGE_CDTXADDR(sc, sc->sc_txdirty)); + + bus_space_write_4(st, sh, STGE_RFDListPtrHi, 0); /* NOTE: 32-bit DMA */ + bus_space_write_4(st, sh, STGE_RFDListPtrLo, + STGE_CDRXADDR(sc, sc->sc_rxptr)); + + /* + * Initialize the Tx auto-poll period. It's OK to make this number + * large (255 is the max, but we use 127) -- we explicitly kick the + * transmit engine when there's actually a packet. + */ + bus_space_write_1(st, sh, STGE_TxDMAPollPeriod, 127); + + /* ..and the Rx auto-poll period. */ + bus_space_write_1(st, sh, STGE_RxDMAPollPeriod, 64); + + /* Initialize the Tx start threshold. */ + bus_space_write_2(st, sh, STGE_TxStartThresh, sc->sc_txthresh); + + /* + * Initialize the Rx DMA interrupt control register. We + * request an interrupt after every incoming packet, but + * defer it for 32us (64 * 512 ns). + */ + bus_space_write_4(st, sh, STGE_RxDMAIntCtrl, + RDIC_RxFrameCount(1) | RDIC_RxDMAWaitTime(512)); + + /* + * Initialize the interrupt mask. + */ + sc->sc_IntEnable = IE_HostError | IE_TxComplete | IE_UpdateStats | + IE_TxDMAComplete | IE_RxDMAComplete | IE_RFDListEnd; + bus_space_write_2(st, sh, STGE_IntStatus, 0xffff); + bus_space_write_2(st, sh, STGE_IntEnable, sc->sc_IntEnable); + + /* + * Configure the DMA engine. + * XXX Should auto-tune TxBurstLimit. + */ + bus_space_write_4(st, sh, STGE_DMACtrl, sc->sc_DMACtrl | + DMAC_TxBurstLimit(3)); + + /* + * Send a PAUSE frame when we reach 29,696 bytes in the Rx + * FIFO, and send an un-PAUSE frame when the FIFO is totally + * empty again. + */ + bus_space_write_4(st, sh, STGE_FlowOnTresh, 29696 / 16); + bus_space_write_4(st, sh, STGE_FlowOffThresh, 0); + + /* + * Set the maximum frame size. + */ +#ifdef fake + bus_space_write_2(st, sh, STGE_MaxFrameSize, + ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN + + ((sc->sc_arpcom.ac_capenable & ETHERCAP_VLAN_MTU) ? + ETHER_VLAN_ENCAP_LEN : 0)); +#else +#if NVLAN > 0 + bus_space_write_2(st, sh, STGE_MaxFrameSize, + ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN + 4); +#else + bus_space_write_2(st, sh, STGE_MaxFrameSize, + ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN); +#endif +#endif + /* + * Initialize MacCtrl -- do it before setting the media, + * as setting the media will actually program the register. + * + * Note: We have to poke the IFS value before poking + * anything else. + */ + sc->sc_MACCtrl = MC_IFSSelect(0); + bus_space_write_4(st, sh, STGE_MACCtrl, sc->sc_MACCtrl); + sc->sc_MACCtrl |= MC_StatisticsEnable | MC_TxEnable | MC_RxEnable; + + if (sc->sc_rev >= 6) { /* >= B.2 */ + /* Multi-frag frame bug work-around. */ + bus_space_write_2(st, sh, STGE_DebugCtrl, + bus_space_read_2(st, sh, STGE_DebugCtrl) | 0x0200); + + /* Tx Poll Now bug work-around. */ + bus_space_write_2(st, sh, STGE_DebugCtrl, + bus_space_read_2(st, sh, STGE_DebugCtrl) | 0x0010); + } + + /* + * Set the current media. + */ + mii_mediachg(&sc->sc_mii); + + /* + * Start the one second MII clock. + */ + timeout_add(&sc->sc_timeout, hz); + + /* + * ...all done! + */ + ifp->if_flags |= IFF_RUNNING; + ifp->if_flags &= ~IFF_OACTIVE; + + out: + if (error) + printf("%s: interface not running\n", sc->sc_dev.dv_xname); + return (error); +} + +/* + * stge_drain: + * + * Drain the receive queue. + */ +void +stge_rxdrain(struct stge_softc *sc) +{ + struct stge_descsoft *ds; + int i; + + for (i = 0; i < STGE_NRXDESC; i++) { + ds = &sc->sc_rxsoft[i]; + if (ds->ds_mbuf != NULL) { + bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap); + ds->ds_mbuf->m_next = NULL; + m_freem(ds->ds_mbuf); + ds->ds_mbuf = NULL; + } + } +} + +/* + * stge_stop: [ ifnet interface function ] + * + * Stop transmission on the interface. + */ +void +stge_stop(struct ifnet *ifp, int disable) +{ + struct stge_softc *sc = ifp->if_softc; + struct stge_descsoft *ds; + int i; + + /* + * Stop the one second clock. + */ + timeout_del(&sc->sc_timeout); + + /* Down the MII. */ + mii_down(&sc->sc_mii); + + /* + * Disable interrupts. + */ + bus_space_write_2(sc->sc_st, sc->sc_sh, STGE_IntEnable, 0); + + /* + * Stop receiver, transmitter, and stats update. + */ + bus_space_write_4(sc->sc_st, sc->sc_sh, STGE_MACCtrl, + MC_StatisticsDisable | MC_TxDisable | MC_RxDisable); + + /* + * Stop the transmit and receive DMA. + */ + stge_dma_wait(sc); + bus_space_write_4(sc->sc_st, sc->sc_sh, STGE_TFDListPtrHi, 0); + bus_space_write_4(sc->sc_st, sc->sc_sh, STGE_TFDListPtrLo, 0); + bus_space_write_4(sc->sc_st, sc->sc_sh, STGE_RFDListPtrHi, 0); + bus_space_write_4(sc->sc_st, sc->sc_sh, STGE_RFDListPtrLo, 0); + + /* + * Release any queued transmit buffers. + */ + for (i = 0; i < STGE_NTXDESC; i++) { + ds = &sc->sc_txsoft[i]; + if (ds->ds_mbuf != NULL) { + bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap); + m_freem(ds->ds_mbuf); + ds->ds_mbuf = NULL; + } + } + + if (disable) + stge_rxdrain(sc); + + /* + * Mark the interface down and cancel the watchdog timer. + */ + ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE); + ifp->if_timer = 0; +} + +#if 0 +static int +stge_eeprom_wait(struct stge_softc *sc) +{ + int i; + + for (i = 0; i < STGE_TIMEOUT; i++) { + delay(1000); + if ((bus_space_read_2(sc->sc_st, sc->sc_sh, STGE_EepromCtrl) & + EC_EepromBusy) == 0) + return (0); + } + return (1); +} + +/* + * stge_read_eeprom: + * + * Read data from the serial EEPROM. + */ +void +stge_read_eeprom(struct stge_softc *sc, int offset, uint16_t *data) +{ + + if (stge_eeprom_wait(sc)) + printf("%s: EEPROM failed to come ready\n", + sc->sc_dev.dv_xname); + + bus_space_write_2(sc->sc_st, sc->sc_sh, STGE_EepromCtrl, + EC_EepromAddress(offset) | EC_EepromOpcode(EC_OP_RR)); + if (stge_eeprom_wait(sc)) + printf("%s: EEPROM read timed out\n", + sc->sc_dev.dv_xname); + *data = bus_space_read_2(sc->sc_st, sc->sc_sh, STGE_EepromData); +} +#endif /* 0 */ + +/* + * stge_add_rxbuf: + * + * Add a receive buffer to the indicated descriptor. + */ +int +stge_add_rxbuf(struct stge_softc *sc, int idx) +{ + struct stge_descsoft *ds = &sc->sc_rxsoft[idx]; + struct mbuf *m; + int error; + + MGETHDR(m, M_DONTWAIT, MT_DATA); + if (m == NULL) + return (ENOBUFS); + + MCLGET(m, M_DONTWAIT); + if ((m->m_flags & M_EXT) == 0) { + m_freem(m); + return (ENOBUFS); + } + + m->m_data = m->m_ext.ext_buf + 2; + m->m_len = MCLBYTES - 2; + + if (ds->ds_mbuf != NULL) + bus_dmamap_unload(sc->sc_dmat, ds->ds_dmamap); + + ds->ds_mbuf = m; + + error = bus_dmamap_load(sc->sc_dmat, ds->ds_dmamap, + m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_NOWAIT); + if (error) { + printf("%s: can't load rx DMA map %d, error = %d\n", + sc->sc_dev.dv_xname, idx, error); + panic("stge_add_rxbuf"); /* XXX */ + } + + bus_dmamap_sync(sc->sc_dmat, ds->ds_dmamap, 0, + ds->ds_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); + + STGE_INIT_RXDESC(sc, idx); + + return (0); +} + +u_int8_t stge_calchash(caddr_t); + +u_int8_t stge_calchash(addr) + caddr_t addr; +{ + u_int32_t crc, carry; + int i, j; + u_int8_t c; + + /* Compute CRC for the address value. */ + crc = 0xFFFFFFFF; /* initial value */ + + for (i = 0; i < 6; i++) { + c = *(addr + i); + for (j = 0; j < 8; j++) { + carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01); + crc <<= 1; + c >>= 1; + if (carry) + crc = (crc ^ 0x04c11db6) | carry; + } + } + + /* return the filter bit position */ + return(crc & 0x0000003F); +} + +/* + * stge_set_filter: + * + * Set up the receive filter. + */ +void +stge_set_filter(struct stge_softc *sc) +{ + struct ifnet *ifp = &sc->sc_arpcom.ac_if; + struct ether_multi *enm; + struct ether_multistep step; + int h = 0; + u_int32_t mchash[2] = { 0, 0 }; + + sc->sc_ReceiveMode = RM_ReceiveUnicast; + if (ifp->if_flags & IFF_BROADCAST) + sc->sc_ReceiveMode |= RM_ReceiveBroadcast; + + if (ifp->if_flags & IFF_PROMISC) { + sc->sc_ReceiveMode |= RM_ReceiveAllFrames; + goto allmulti; + } + + /* + * Set up the multicast address filter by passing all multicast + * addresses through a CRC generator, and then using the low-order + * 6 bits as an index into the 64 bit multicast hash table. The + * high order bits select the register, while the rest of the bits + * select the bit within the register. + */ + + ETHER_FIRST_MULTI(step, &sc->sc_arpcom, enm); + if (enm == NULL) + goto done; + + while (enm != NULL) { + h = stge_calchash(enm->enm_addrlo); + if (h < 32) + mchash[0] |= (1 << h); + else + mchash[1] |= (1 << (h - 32)); + ETHER_NEXT_MULTI(step, enm); + } + + sc->sc_ReceiveMode |= RM_ReceiveMulticastHash; + + ifp->if_flags &= ~IFF_ALLMULTI; + goto done; + + allmulti: + ifp->if_flags |= IFF_ALLMULTI; + sc->sc_ReceiveMode |= RM_ReceiveMulticast; + + done: + if ((ifp->if_flags & IFF_ALLMULTI) == 0) { + /* + * Program the multicast hash table. + */ + bus_space_write_4(sc->sc_st, sc->sc_sh, STGE_HashTable0, + mchash[0]); + bus_space_write_4(sc->sc_st, sc->sc_sh, STGE_HashTable1, + mchash[1]); + } + + bus_space_write_1(sc->sc_st, sc->sc_sh, STGE_ReceiveMode, + sc->sc_ReceiveMode); +} + +/* + * stge_mii_readreg: [mii interface function] + * + * Read a PHY register on the MII of the TC9021. + */ +int +stge_mii_readreg(struct device *self, int phy, int reg) +{ + + return (mii_bitbang_readreg(self, &stge_mii_bitbang_ops, phy, reg)); +} + +/* + * stge_mii_writereg: [mii interface function] + * + * Write a PHY register on the MII of the TC9021. + */ +void +stge_mii_writereg(struct device *self, int phy, int reg, int val) +{ + + mii_bitbang_writereg(self, &stge_mii_bitbang_ops, phy, reg, val); +} + +/* + * stge_mii_statchg: [mii interface function] + * + * Callback from MII layer when media changes. + */ +void +stge_mii_statchg(struct device *self) +{ + struct stge_softc *sc = (struct stge_softc *) self; + + if (sc->sc_mii.mii_media_active & IFM_FDX) + sc->sc_MACCtrl |= MC_DuplexSelect; + else + sc->sc_MACCtrl &= ~MC_DuplexSelect; + + /* XXX 802.1x flow-control? */ + + bus_space_write_4(sc->sc_st, sc->sc_sh, STGE_MACCtrl, sc->sc_MACCtrl); +} + +/* + * sste_mii_bitbang_read: [mii bit-bang interface function] + * + * Read the MII serial port for the MII bit-bang module. + */ +uint32_t +stge_mii_bitbang_read(struct device *self) +{ + struct stge_softc *sc = (void *) self; + + return (bus_space_read_1(sc->sc_st, sc->sc_sh, STGE_PhyCtrl)); +} + +/* + * stge_mii_bitbang_write: [mii big-bang interface function] + * + * Write the MII serial port for the MII bit-bang module. + */ +void +stge_mii_bitbang_write(struct device *self, uint32_t val) +{ + struct stge_softc *sc = (void *) self; + + bus_space_write_1(sc->sc_st, sc->sc_sh, STGE_PhyCtrl, + val | sc->sc_PhyCtrl); +} + +/* + * stge_mediastatus: [ifmedia interface function] + * + * Get the current interface media status. + */ +void +stge_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) +{ + struct stge_softc *sc = ifp->if_softc; + + mii_pollstat(&sc->sc_mii); + ifmr->ifm_status = sc->sc_mii.mii_media_status; + ifmr->ifm_active = sc->sc_mii.mii_media_active; +} + +/* + * stge_mediachange: [ifmedia interface function] + * + * Set hardware to newly-selected media. + */ +int +stge_mediachange(struct ifnet *ifp) +{ + struct stge_softc *sc = ifp->if_softc; + + if (ifp->if_flags & IFF_UP) + mii_mediachg(&sc->sc_mii); + return (0); +} diff --git a/sys/dev/pci/if_stgereg.h b/sys/dev/pci/if_stgereg.h new file mode 100644 index 00000000000..79c6fd01d80 --- /dev/null +++ b/sys/dev/pci/if_stgereg.h @@ -0,0 +1,458 @@ +/* $NetBSD$ */ + +/*- + * Copyright (c) 2001 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Jason R. Thorpe. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the NetBSD + * Foundation, Inc. and its contributors. + * 4. Neither the name of The NetBSD Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _DEV_PCI_IF_STGEREG_H_ +#define _DEV_PCI_IF_STGEREG_H_ + +/* + * Register description for the Sundance Tech. TC9021 10/100/1000 + * Ethernet controller. + * + * Note that while DMA addresses are all in 64-bit fields, only + * the lower 40 bits of a DMA address are valid. + */ + +/* + * TC9021 buffer fragment descriptor. + */ +struct stge_frag { + uint64_t frag_word0; /* address, length */ +} __attribute__((__packed__)); + +#define FRAG_ADDR(x) (((uint64_t)(x)) << 0) +#define FRAG_ADDR_MASK FRAG_ADDR(0xfffffffffULL) +#define FRAG_LEN(x) (((uint64_t)(x)) << 48) +#define FRAG_LEN_MASK FRAG_LEN(0xffffULL) + +/* + * TC9021 Transmit Frame Descriptor. Note the number of fragments + * here is arbitrary, but we can't have any more than than 15. + */ +#define STGE_NTXFRAGS 12 +struct stge_tfd { + uint64_t tfd_next; /* next TFD in list */ + uint64_t tfd_control; /* control bits */ + /* the buffer fragments */ + struct stge_frag tfd_frags[STGE_NTXFRAGS]; +} __attribute__((__packed__)); + +#define TFD_FrameId(x) ((x) << 0) +#define TFD_FrameId_MAX 0xffff +#define TFD_WordAlign(x) ((x) << 16) +#define TFD_WordAlign_dword 0 /* align to dword in TxFIFO */ +#define TFD_WordAlign_word 2 /* align to word in TxFIFO */ +#define TFD_WordAlign_disable 1 /* disable alignment */ +#define TFD_TCPChecksumEnable (1ULL << 18) +#define TFD_UDPChecksumEnable (1ULL << 19) +#define TFD_IPChecksumEnable (1ULL << 20) +#define TFD_FcsAppendDisable (1ULL << 21) +#define TFD_TxIndicate (1ULL << 22) +#define TFD_TxDMAIndicate (1ULL << 23) +#define TFD_FragCount(x) ((x) << 24) +#define TFD_VLANTagInsert (1ULL << 28) +#define TFD_TFDDone (1ULL << 31) +#define TFD_VID(x) (((uint64_t)(x)) << 32) +#define TFD_CFI (1ULL << 44) +#define TFD_UserPriority(x) (((uint64_t)(x)) << 45) + +/* + * TC9021 Receive Frame Descriptor. Each RFD has a single fragment + * in it, and the chip tells us the beginning and end of the frame. + */ +struct stge_rfd { + uint64_t rfd_next; /* next RFD in list */ + uint64_t rfd_status; /* status bits */ + struct stge_frag rfd_frag; /* the buffer */ +} __attribute__((__packed__)); + +#define RFD_RxDMAFrameLen(x) ((x) & 0xffff) +#define RFD_RxFIFOOverrun (1ULL << 16) +#define RFD_RxRuntFrame (1ULL << 17) +#define RFD_RxAlignmentError (1ULL << 18) +#define RFD_RxFCSError (1ULL << 19) +#define RFD_RxOversizedFrame (1ULL << 20) +#define RFD_RxLengthError (1ULL << 21) +#define RFD_VLANDetected (1ULL << 22) +#define RFD_TCPDetected (1ULL << 23) +#define RFD_TCPError (1ULL << 24) +#define RFD_UDPDetected (1ULL << 25) +#define RFD_UDPError (1ULL << 26) +#define RFD_IPDetected (1ULL << 27) +#define RFD_IPError (1ULL << 28) +#define RFD_FrameStart (1ULL << 29) +#define RFD_FrameEnd (1ULL << 30) +#define RFD_RFDDone (1ULL << 31) +#define RFD_TCI(x) ((((uint64_t)(x)) >> 32) & 0xffff) + +/* + * PCI configuration registers used by the TC9021. + */ + +#define STGE_PCI_IOBA (PCI_MAPREG_START + 0x00) +#define STGE_PCI_MMBA (PCI_MAPREG_START + 0x04) + +/* + * EEPROM offsets. + */ +#define STGE_EEPROM_ConfigParam 0x00 +#define STGE_EEPROM_AsicCtrl 0x01 +#define STGE_EEPROM_SubSystemVendorId 0x02 +#define STGE_EEPROM_SubSystemId 0x03 +#define STGE_EEPROM_StationAddress0 0x10 +#define STGE_EEPROM_StationAddress1 0x11 +#define STGE_EEPROM_StationAddress2 0x12 + +/* + * The TC9021 register space. + */ + +#define STGE_DMACtrl 0x00 +#define DMAC_RxDMAComplete (1U << 3) +#define DMAC_RxDMAPollNow (1U << 4) +#define DMAC_TxDMAComplete (1U << 11) +#define DMAC_TxDMAPollNow (1U << 12) +#define DMAC_TxDMAInProg (1U << 15) +#define DMAC_RxEarlyDisable (1U << 16) +#define DMAC_MWIDisable (1U << 18) +#define DMAC_TxWiteBackDisable (1U << 19) +#define DMAC_TxBurstLimit(x) ((x) << 20) +#define DMAC_TargetAbort (1U << 30) +#define DMAC_MasterAbort (1U << 31) + +#define STGE_RxDMAStatus 0x08 + +#define STGE_TFDListPtrLo 0x10 + +#define STGE_TFDListPtrHi 0x14 + +#define STGE_TxDMABurstThresh 0x18 /* 8-bit */ + +#define STGE_TxDMAUrgentThresh 0x19 /* 8-bit */ + +#define STGE_TxDMAPollPeriod 0x1a /* 8-bit */ + +#define STGE_RFDListPtrLo 0x1c + +#define STGE_RFDListPtrHi 0x20 + +#define STGE_RxDMABurstThresh 0x24 /* 8-bit */ + +#define STGE_RxDMAUrgentThresh 0x25 /* 8-bit */ + +#define STGE_RxDMAPollPeriod 0x26 /* 8-bit */ + +#define STGE_RxDMAIntCtrl 0x28 +#define RDIC_RxFrameCount(x) ((x) & 0xff) +#define RDIC_PriorityThresh(x) ((x) << 10) +#define RDIC_RxDMAWaitTime(x) ((x) << 16) + +#define STGE_DebugCtrl 0x2c /* 16-bit */ +#define DC_GPIO0Ctrl (1U << 0) +#define DC_GPIO1Ctrl (1U << 1) +#define DC_GPIO0 (1U << 2) +#define DC_GPIO1 (1U << 3) + +#define STGE_AsicCtrl 0x30 +#define AC_ExpRomDisable (1U << 0) +#define AC_ExpRomSize (1U << 1) +#define AC_PhySpeed10 (1U << 4) +#define AC_PhySpeed100 (1U << 5) +#define AC_PhySpeed1000 (1U << 6) +#define AC_PhyMedia (1U << 7) +#define AC_ForcedConfig(x) ((x) << 8) +#define AC_ForcedConfig_MASK AC_ForcedConfig(7) +#define AC_D3ResetDisable (1U << 11) +#define AC_SpeedupMode (1U << 13) +#define AC_LEDMode (1U << 14) +#define AC_RstOutPolarity (1U << 15) +#define AC_GlobalReset (1U << 16) +#define AC_RxReset (1U << 17) +#define AC_TxReset (1U << 18) +#define AC_DMA (1U << 19) +#define AC_FIFO (1U << 20) +#define AC_Network (1U << 21) +#define AC_Host (1U << 22) +#define AC_AutoInit (1U << 23) +#define AC_RstOut (1U << 24) +#define AC_InterruptRequest (1U << 25) +#define AC_ResetBusy (1U << 26) + +#define STGE_FIFOCtrl 0x38 /* 16-bit */ +#define FC_RAMTestMode (1U << 0) +#define FC_Transmitting (1U << 14) +#define FC_Receiving (1U << 15) + +#define STGE_RxEarlyThresh 0x3a /* 16-bit */ + +#define STGE_FlowOffThresh 0x3c /* 16-bit */ + +#define STGE_FlowOnTresh 0x3e /* 16-bit */ + +#define STGE_TxStartThresh 0x44 /* 16-bit */ + +#define STGE_EepromData 0x48 /* 16-bit */ + +#define STGE_EepromCtrl 0x4a /* 16-bit */ +#define EC_EepromAddress(x) ((x) & 0xff) +#define EC_EepromOpcode(x) ((x) << 8) +#define EC_OP_WE 0 +#define EC_OP_WR 1 +#define EC_OP_RR 2 +#define EC_OP_ER 3 +#define EC_EepromBusy (1U << 15) + +#define STGE_ExpRomAddr 0x4c + +#define STGE_ExpRomData 0x50 /* 8-bit */ + +#define STGE_WakeEvent 0x51 /* 8-bit */ + +#define STGE_Countdown 0x54 +#define CD_Count(x) ((x) & 0xffff) +#define CD_CountdownSpeed (1U << 24) +#define CD_CountdownMode (1U << 25) +#define CD_CountdownIntEnabled (1U << 26) + +#define STGE_IntStatusAck 0x5a /* 16-bit */ + +#define STGE_IntEnable 0x5c /* 16-bit */ +#define IE_HostError (1U << 1) +#define IE_TxComplete (1U << 2) +#define IE_MACControlFrame (1U << 3) +#define IE_RxComplete (1U << 4) +#define IE_RxEarly (1U << 5) +#define IE_InRequested (1U << 6) +#define IE_UpdateStats (1U << 7) +#define IE_LinkEvent (1U << 8) +#define IE_TxDMAComplete (1U << 9) +#define IE_RxDMAComplete (1U << 10) +#define IE_RFDListEnd (1U << 11) +#define IE_RxDMAPriority (1U << 12) + +#define STGE_IntStatus 0x5e /* 16-bit */ +#define IS_InterruptStatus (1U << 0) + +#define STGE_TxStatus 0x60 +#define TS_TxError (1U << 0) +#define TS_LateCollision (1U << 2) +#define TS_MaxCollisions (1U << 3) +#define TS_TxUnderrun (1U << 4) +#define TS_TxIndicateReqd (1U << 6) +#define TS_TxComplete (1U << 7) +#define TS_TxFrameId_get(x) ((x) >> 16) + +#define STGE_MACCtrl 0x6c +#define MC_IFSSelect(x) ((x) & 3) +#define MC_DuplexSelect (1U << 5) +#define MC_RcvLargeFrames (1U << 6) +#define MC_TxFlowControlEnable (1U << 7) +#define MC_RxFlowControlEnable (1U << 8) +#define MC_RcvFCS (1U << 9) +#define MC_FIFOLoopback (1U << 10) +#define MC_MACLoopback (1U << 11) +#define MC_AutoVLANtagging (1U << 12) +#define MC_AutoVLANuntagging (1U << 13) +#define MC_CollisionDetect (1U << 16) +#define MC_CarrierSense (1U << 17) +#define MC_StatisticsEnable (1U << 21) +#define MC_StatisticsDisable (1U << 22) +#define MC_StatisticsEnabled (1U << 23) +#define MC_TxEnable (1U << 24) +#define MC_TxDisable (1U << 25) +#define MC_TxEnabled (1U << 26) +#define MC_RxEnable (1U << 27) +#define MC_RxDisable (1U << 28) +#define MC_RxEnabled (1U << 29) +#define MC_Paused (1U << 30) + +#define STGE_VLANTag 0x70 + +#define STGE_PhyCtrl 0x76 /* 8-bit */ +#define PC_MgmtClk (1U << 0) +#define PC_MgmtData (1U << 1) +#define PC_MgmtDir (1U << 2) /* MAC->PHY */ +#define PC_PhyDuplexPolarity (1U << 3) +#define PC_PhyDuplexStatus (1U << 4) +#define PC_PhyLnkPolarity (1U << 5) +#define PC_LinkSpeed(x) (((x) >> 6) & 3) +#define PC_LinkSpeed_Down 0 +#define PC_LinkSpeed_10 1 +#define PC_LinkSpeed_100 2 +#define PC_LinkSpeed_1000 3 + +#define STGE_StationAddress0 0x78 /* 16-bit */ + +#define STGE_StationAddress1 0x7a /* 16-bit */ + +#define STGE_StationAddress2 0x7c /* 16-bit */ + +#define STGE_VLANHashTable 0x7e /* 16-bit */ + +#define STGE_VLANId 0x80 + +#define STGE_MaxFrameSize 0x84 + +#define STGE_ReceiveMode 0x88 /* 16-bit */ +#define RM_ReceiveUnicast (1U << 0) +#define RM_ReceiveMulticast (1U << 1) +#define RM_ReceiveBroadcast (1U << 2) +#define RM_ReceiveAllFrames (1U << 3) +#define RM_ReceiveMulticastHash (1U << 4) +#define RM_ReceiveIPMulticast (1U << 5) +#define RM_ReceiveVLANMatch (1U << 8) +#define RM_ReceiveVLANHash (1U << 9) + +#define STGE_HashTable0 0x8c + +#define STGE_HashTable1 0x90 + +#define STGE_RMONStatisticsMask 0x98 /* set to disable */ + +#define STGE_StatisticsMask 0x9c /* set to disable */ + +#define STGE_RxJumboFrames 0xbc /* 16-bit */ + +#define STGE_TCPCheckSumErrors 0xc0 /* 16-bit */ + +#define STGE_IPCheckSumErrors 0xc2 /* 16-bit */ + +#define STGE_UDPCheckSumErrors 0xc4 /* 16-bit */ + +#define STGE_TxJumboFrames 0xf4 /* 16-bit */ + +/* + * TC9021 statistics. Available memory and I/O mapped. + */ + +#define STGE_OctetRcvOk 0xa8 + +#define STGE_McstOctetRcvdOk 0xac + +#define STGE_BcstOctetRcvdOk 0xb0 + +#define STGE_FramesRcvdOk 0xb4 + +#define STGE_McstFramesRcvdOk 0xb8 + +#define STGE_BcstFramesRcvdOk 0xbe /* 16-bit */ + +#define STGE_MacControlFramesRcvd 0xc6 /* 16-bit */ + +#define STGE_FrameTooLongErrors 0xc8 /* 16-bit */ + +#define STGE_InRangeLengthErrors 0xca /* 16-bit */ + +#define STGE_FramesCheckSeqErrors 0xcc /* 16-bit */ + +#define STGE_FramesLostRxErrors 0xce /* 16-bit */ + +#define STGE_OctetXmtdOk 0xd0 + +#define STGE_McstOctetXmtdOk 0xd4 + +#define STGE_BcstOctetXmtdOk 0xd8 + +#define STGE_FramesXmtdOk 0xdc + +#define STGE_McstFramesXmtdOk 0xe0 + +#define STGE_FramesWDeferredXmt 0xe4 + +#define STGE_LateCollisions 0xe8 + +#define STGE_MultiColFrames 0xec + +#define STGE_SingleColFrames 0xf0 + +#define STGE_BcstFramesXmtdOk 0xf6 /* 16-bit */ + +#define STGE_CarrierSenseErrors 0xf8 /* 16-bit */ + +#define STGE_MacControlFramesXmtd 0xfa /* 16-bit */ + +#define STGE_FramesAbortXSColls 0xfc /* 16-bit */ + +#define STGE_FramesWEXDeferal 0xfe /* 16-bit */ + +/* + * RMON-compatible statistics. Only accessible if memory-mapped. + */ + +#define STGE_EtherStatsCollisions 0x100 + +#define STGE_EtherStatsOctetsTransmit 0x104 + +#define STGE_EtherStatsPktsTransmit 0x108 + +#define STGE_EtherStatsPkts64OctetsTransmit 0x10c + +#define STGE_EtherStatsPkts64to127OctetsTransmit 0x110 + +#define STGE_EtherStatsPkts128to255OctetsTransmit 0x114 + +#define STGE_EtherStatsPkts256to511OctetsTransmit 0x118 + +#define STGE_EtherStatsPkts512to1023OctetsTransmit 0x11c + +#define STGE_EtherStatsPkts1024to1518OctetsTransmit 0x120 + +#define STGE_EtherStatsCRCAlignErrors 0x124 + +#define STGE_EtherStatsUndersizePkts 0x128 + +#define STGE_EtherStatsFragments 0x12c + +#define STGE_EtherStatsJabbers 0x130 + +#define STGE_EtherStatsOctets 0x134 + +#define STGE_EtherStatsPkts 0x138 + +#define STGE_EtherStatsPkts64Octets 0x13c + +#define STGE_EtherStatsPkts65to127Octets 0x140 + +#define STGE_EtherStatsPkts128to255Octets 0x144 + +#define STGE_EtherStatsPkts256to511Octets 0x148 + +#define STGE_EtherStatsPkts512to1023Octets 0x14c + +#define STGE_EtherStatsPkts1024to1518Octets 0x150 + +#endif /* _DEV_PCI_IF_STGEREG_H_ */ |