summaryrefslogtreecommitdiff
path: root/distrib/hp300/ramdisk/install.md
diff options
context:
space:
mode:
Diffstat (limited to 'distrib/hp300/ramdisk/install.md')
-rw-r--r--distrib/hp300/ramdisk/install.md224
1 files changed, 140 insertions, 84 deletions
diff --git a/distrib/hp300/ramdisk/install.md b/distrib/hp300/ramdisk/install.md
index 2cfec5a84bb..271aadca727 100644
--- a/distrib/hp300/ramdisk/install.md
+++ b/distrib/hp300/ramdisk/install.md
@@ -1,6 +1,6 @@
#!/bin/sh
#
-# $OpenBSD: install.md,v 1.2 1997/02/16 19:32:35 downsj Exp $
+# $OpenBSD: install.md,v 1.3 1997/02/23 19:10:52 downsj Exp $
# $NetBSD: install.md,v 1.1.2.4 1996/08/26 15:45:14 gwr Exp $
#
# Copyright (c) 1996 The NetBSD Foundation, Inc.
@@ -45,50 +45,86 @@
# Machine-dependent install sets
MDSETS=""
+TMPWRITEABLE=/tmp/writeable
+KERNFSMOUNTED=/tmp/kernfsmounted
+
md_set_term() {
- if [ ! -z "$TERM" ]; then
- return
- fi
echo -n "Specify terminal type [hp300h]: "
getresp "hp300h"
TERM="$resp"
export TERM
- # XXX call tset?
+ # set screensize (i.e., for an xterm)
+ rows=`stty -a | grep rows | awk '{print $4}'`
+ columns=`stty -a | grep columns | awk '{print $6}'`
+ if [ "$rows" -eq 0 -o "$columns" -eq 0 ]; then
+ echo -n "Specify terminal rows [25]: "
+ getresp "25"
+ rows="$resp"
+
+ echo -n "Specify terminal columns [80]: "
+ getresp "80"
+ columns="$resp"
+
+ stty rows "$rows" columns "$columns"
+ fi
}
md_makerootwritable() {
- # Was: do_mfs_mount "/tmp" "2048"
- # /tmp is the mount point
- # 2048 is the size in DEV_BIZE blocks
- umount /tmp > /dev/null 2>&1
- if ! mount_mfs -s 2048 swap /tmp ; then
- cat << \__mfs_failed_1
+ if [ -e ${TMPWRITEABLE} ]
+ then
+ md_mountkernfs
+ return
+ fi
+ if ! mount -t ffs -u /dev/rd0a / ; then
+ cat << \__rd0_failed_1
-FATAL ERROR: Can't mount the memory filesystem.
+FATAL ERROR: Can't mount the ram filesystem.
-__mfs_failed_1
+__rd0_failed_1
exit
fi
- # Bleh. Give mount_mfs a chance to DTRT.
sleep 2
+ > ${TMPWRITEABLE}
+
+ md_mountkernfs
+}
+
+md_mountkernfs() {
+ if [ -e ${KERNFSMOUNTED} ]
+ then
+ return
+ fi
+ if ! mount -t kernfs /kern /kern
+ then
+ cat << \__kernfs_failed_1
+FATAL ERROR: Can't mount kernfs filesystem
+__kernfs_failed_1
+ exit
+ fi
+ > ${KERNFSMOUNTED}
}
md_get_diskdevs() {
# return available disk devices
- dmesg | grep "^rd[0-9]*:." | cut -d":" -f1 | sort -u
- dmesg | grep "^sd[0-9]*:.*cylinders" | cut -d":" -f1 | sort -u
+ egrep "^hd[0-9]*:." < /kern/msgbuf | cut -d":" -f1 | sort -u
+ egrep "^sd[0-9]*:.*cylinders" < /kern/msgbuf | cut -d":" -f1 | sort -u
}
md_get_cddevs() {
# return available CD-ROM devices
- dmesg | grep "sd[0-9]*:.*CD-ROM" | cut -d":" -f1 | sort -u
+ egrep "sd[0-9]*:.*CD-ROM" < /kern/msgbuf | cut -d":" -f1 | sort -u
}
md_get_ifdevs() {
# return available network interfaces
- dmesg | grep "^le[0-9]*:" | cut -d":" -f1 | sort -u
+ egrep "^le[0-9]*:" < /kern/msgbuf | cut -d":" -f1 | sort -u
+}
+
+md_get_partition_range() {
+ # return range of valid partition letters
+ echo "[a-p]"
}
md_installboot() {
@@ -127,7 +163,7 @@ hp300_init_label_scsi_disk() {
_cur_disk_name="install-disk-${_disk_instance}"
# Get geometry information from the user.
- more << \__scsi_label_1
+ less << \__scsi_label_1
You will need to provide some information about your disk's geometry.
Geometry info for SCSI disks was printed at boot time. If that information
@@ -154,7 +190,7 @@ __scsi_label_1
getresp "y"
case "$resp" in
y*|Y*)
- (echo ""; dmesg; echo "") | more
+ less -rsS /kern/msgbuf
;;
*)
@@ -271,8 +307,8 @@ hp300_init_label_hpib_disk() {
# We look though the boot messages attempting to find
# the model number for the provided disk.
_hpib_disktype=""
- if dmesg | grep "${1}: " > /dev/null 2>&1; then
- _hpib_disktype=HP`dmesg | grep "${1}: " | sort -u | \
+ if egrep "${1}: " < /kern/msgbuf > /dev/null 2>&1; then
+ _hpib_disktype=HP`egrep "${1}: " < /kern/msgbuf | sort -u | \
awk '{print $2}'`
fi
if [ "X${_hpib_disktype}" = "X" ]; then
@@ -286,7 +322,7 @@ hp300_init_label_hpib_disk() {
# layout. If it doesn't, we have to treat it like a SCSI disk;
# i.e. prompt for geometry, and create a default to place
# on the disk.
- if ! grep "${_hpib_disktype}[:|]" /etc/disktab > /dev/null \
+ if ! egrep "${_hpib_disktype}[:|]" /etc/disktab > /dev/null \
2>&1; then
echo ""
echo "WARNING: can't find defaults for $1 ($_hpib_disktype)"
@@ -341,7 +377,7 @@ md_labeldisk() {
*)
echo -n "No disklabel present, installing a default for type: "
case "$1" in
- rd*)
+ hd*)
echo "HP-IB"
hp300_init_label_hpib_disk $1
;;
@@ -378,76 +414,96 @@ md_labeldisk() {
esac
}
-md_prep_disklabel() {
- # $1 is the root disk
-
- # Make sure there's a disklabel there. If there isn't, puke after
- # disklabel prints the error message.
- md_checkfordisklabel $1
- case "$resp" in
- 1)
- cat << \__md_prep_disklabel_1
-
-FATAL ERROR: There is no disklabel present on the root disk! You must
-label the disk with SYS_INST before continuing.
-
-__md_prep_disklabel_1
- exit
- ;;
-
- 2)
- cat << \__md_prep_disklabel_2
-
-FATAL ERROR: The disklabel on the root disk is corrupted! You must
-re-label the disk with SYS_INST before continuing.
-
-__md_prep_disklabel_2
- exit
- ;;
+md_prep_disklabel()
+{
+ local _disk
- *)
- ;;
+ _disk=$1
+ md_checkfordisklabel $_disk
+ case "$rval" in
+ 0)
+ echo -n "Do you wish to edit the disklabel on $_disk? [y] "
+ ;;
+ 1)
+ echo "WARNING: Disk $_disk has no label"
+ echo -n "Do you want to create one with the disklabel editor? [y] "
+ ;;
+ 2)
+ echo "WARNING: Label on disk $_disk is corrupted"
+ echo -n "Do you want to try and repair the damage using the disklabel editor? [y] "
+ ;;
esac
- # Give the user the opportinuty to edit the root disklabel.
- cat << \__md_prep_disklabel_3
-
-You have already placed a disklabel onto the target root disk.
-However, due to the limitations of the standalone program used
-you may want to edit that label to change partition type information.
-You will be given the opporunity to do that now. Note that you may
-not change the size or location of any presently open partition.
-
-__md_prep_disklabel_3
- echo -n "Do you wish to edit the root disklabel? [y] "
getresp "y"
case "$resp" in
- y*|Y*)
- disklabel -W $1
- disklabel -e $1
- ;;
-
- *)
- ;;
+ y*|Y*) ;;
+ *) return ;;
esac
- cat << \__md_prep_disklabel_4
-
-You will now be given the opportunity to place disklabels on any additional
-disks on your system.
-__md_prep_disklabel_4
+ # display example
+ cat << \__md_prep_disklabel_1
+
+Here is an example of what the partition information will look like once
+you have entered the disklabel editor. Disk partition sizes and offsets
+are in sector (most likely 512 bytes) units. Make sure these size/offset
+pairs are on cylinder boundaries (the number of sector per cylinder is
+given in the `sectors/cylinder' entry, which is not shown here).
+
+For the boot disk, partition `a' must be offset one cylinder (the number
+of sectors per cylinder should be given as the offset) and partition
+`c' must have an fstype of `unused'. Non-boot disks may start filesystems
+at offset 0.
+
+[Example]
+16 partitions:
+# size offset fstype [fsize bsize cpg]
+ a: 50176 1574 4.2BSD 1024 8192 16 # (Cyl. 1 - 111)
+ b: 64512 50176 swap # (Cyl. 112 - 255)
+ c: 640192 0 boot # (Cyl. 0 - 1428)
+ d: 525504 114688 4.2BSD 1024 8192 16 # (Cyl. 256 - 1428)
+[End of example]
- _DKDEVS=`rmel ${ROOTDISK} ${_DKDEVS}`
- resp="X" # force at least one iteration
- while [ "X$resp" != X"done" ]; do
- labelmoredisks
- done
+__md_prep_disklabel_1
+ echo -n "Press [Enter] to continue "
+ getresp ""
+ disklabel -W ${_disk}
+ disklabel -e ${_disk}
}
md_copy_kernel() {
- echo -n "Copying kernel..."
- cp -p /netbsd /mnt/netbsd
- echo "done."
+ if [ -d "$SETSDIR" ]; then
+ # `bsd' is prefered over `bsd.gz'
+ if [ -f "$SETSDIR/bsd" ]; then
+ kernfile="$SETSDIR/bsd"
+ dogzip=""
+ elif [ -f "$SETSDIR/bsd.gz" ]; then
+ kernfile="$SETSDIR/bsd.gz"
+ dogzip="yes"
+ elif [ -f "$SETSDIR/bsd-gen" ]; then
+ kernfile="$SETSDIR/bsd-gen"
+ dogzip=""
+ elif [ -f "$SETSDIR/bsd-gen.gz" ]; then
+ kernfile="$SETSDIR/bsd-gen.gz"
+ dogzip="yes"
+ else
+ echo "Couldn't find a kernel file in $SETSDIR."
+ echo "You will have to copy a kernel by hand."
+ return
+ fi
+
+ # Copy in the kernel.
+ echo -n "Copying kernel $kernfile..."
+ if [ "$dogzip" ]; then
+ gzip -d < $kernfile > /mnt/bsd
+ else
+ cp $kernfile /mnt/bsd
+ fi
+ chmod 755 /mnt/bsd
+ echo " done."
+ else
+ echo "Couldn't find $SETSDIR."
+ echo "You will have to copy a kernel by hand."
+ fi
}
# Note, while they might not seem machine-dependent, the
@@ -485,7 +541,7 @@ prompt, you may have to hit return. Also, quitting in the middle of
installation may leave your system in an inconsistent state.
__welcome_banner_1
-) | more
+) | less
}
md_not_going_to_install() {
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-11 23:21:59 +0000