diff options
Diffstat (limited to 'distrib/notes/atari/hardware')
| -rw-r--r-- | distrib/notes/atari/hardware | 33 |
1 files changed, 33 insertions, 0 deletions
diff --git a/distrib/notes/atari/hardware b/distrib/notes/atari/hardware new file mode 100644 index 00000000000..cf708802f19 --- /dev/null +++ b/distrib/notes/atari/hardware @@ -0,0 +1,33 @@ +NetBSD/atari 1.1 runs on a TT030 and a Falcon. Currently an FPU is +required, although this might change in the (near) future. The +minimum amount of RAM required is 4Mb. + +Here is a table of recommended HD partition sizes for a full install: + partition: advise, with X, needed, with X + root (/) 15M 15M 10M 10M + user (/usr) 65M 100M 45M 80M + swap ----- 2M for every M ram ----- + local (/local) up to you + +As you may note the recommended size of /usr is 20M greater than +needed. This is to leave room for a kernel source and compile tree +as you will probably want to compile your own kernel. (GENERIC is +large and bulky to accommodate all people, BOOT is small and might +not have all the features you want). + +Supported devices include: + - The buildin SCSI host adapter + - Should support most SCSI-drives. The drives that are + currently tested are: + MAXTOR 7245S, MAXTOR 7080S, SEAGATE ST157N + - Should support most tape drives. The drives that are + currently tested are: + TANDBERG 3600 + - Should support most CD-ROM drives. + - The buildin video controller + - The building (720Kb/1.44Mb) floppydrive + - The serial2/modem2 ports + - The Falcon FX memory expansion + - The atari mouse + +If its not on this list, there is no support for it in this release. |