diff options
Diffstat (limited to 'distrib/notes/atari/upgrade')
| -rw-r--r-- | distrib/notes/atari/upgrade | 36 |
1 files changed, 0 insertions, 36 deletions
diff --git a/distrib/notes/atari/upgrade b/distrib/notes/atari/upgrade deleted file mode 100644 index f53c1a87a89..00000000000 --- a/distrib/notes/atari/upgrade +++ /dev/null @@ -1,36 +0,0 @@ -Before updating, you probably would want to backup your original -filesystems! - -The update procedure will not overwrite or remove any files not present -in the sets you install. If you've replaced programs present in the -distribution, you have to replace them again after you did the update. -The etc-set needs special caution. You generally don't want to install -this one when upgrading. It is recommended that you get a copy of this -set and _carefully_ upgrade your configuration files by hand. -Before starting the actual procedure, make a note of the partitions your -root- and usr-filesystems are on. You'll need to mount them by hand. - -Ok, let's go. Insert the bootfloppy and follow the 'normal' installation -procedure until it asks you if you wish to proceed with the installation. -Now enter 'n' and hit return. You will be left at the shell prompt. Now -mount your root and usr filesystems on /mnt. If your root-filesystem is -on sd1a and your usr-filesystem on sd1d this would require the following -actions: - mount_ffs /dev/sd1a /mnt - mount_ffs /dev/sd1d /mnt/usr - -At this point, you can follow the section "Installing the OpenBSD System" -to install the sets. There is one difference: When Extract asks you - "Are you installing a -current snapshot? [n]" -answer 'y'. - -Once you are done installing the upgrade sets, then reboot: - cd / - umount -av - halt - <reboot> - -Now you can boot your upgraded system as usually, but take the -new kernel! To finish up, you should rebuild your /dev-directory: - cd /dev - ./MAKEDEV all |