diff options
Diffstat (limited to 'distrib/notes/loongson')
-rw-r--r-- | distrib/notes/loongson/install | 46 |
1 files changed, 27 insertions, 19 deletions
diff --git a/distrib/notes/loongson/install b/distrib/notes/loongson/install index c7e8dbd024c..4a4ad814fad 100644 --- a/distrib/notes/loongson/install +++ b/distrib/notes/loongson/install @@ -1,9 +1,21 @@ -dnl $OpenBSD: install,v 1.6 2010/02/16 22:17:35 miod Exp $ +dnl $OpenBSD: install,v 1.7 2010/02/19 10:48:14 otto Exp $ OpenBSDInstallPrelude Booting the installation media: -The easiest way to boot into the OpenBSD installer is to copy the bsd.rd +The easiest way to boot into the OpenBSD installer is to copy the miniroot +image to a USB stick using dd(1) and boot bsd.rd from the PMON prompt: + + PMON> boot /dev/fs/ext2@usb0/bsd.rd + +on Lemote systems, and + + PMON> load /dev/fs/ext2@usb0/bsd.rd + PMON> g + +on Gdium systems. + +Another way to boot into the OpenBSD installer is to copy the bsd.rd installation kernel to the main Linux partition, and boot from it. Assuming the installation kernel has been copied to /boot/bsd.rd on the @@ -16,7 +28,8 @@ on Lemote systems, and PMON> load /dev/fs/ext2@usbg0/boot/bsd.rd PMON> g -on Gdium systems, to boot the installation kernel. +on Gdium systems. + dnl dnl Alternatively, if your particular PMON flavour supports `fat' filesystems, dnl you can boot the kernel from an usb key with: @@ -28,8 +41,6 @@ Netbooting the installation kernel can be done as well: PMON> ifaddr rtl0 <your ip> PMON> boot tftp://<server ip>/bsd.rd -(on Gdium systems, use a `load' command followed by `g' instead of `boot'). - OpenBSDInstallPart2 OpenBSDInstallPart3(,"sd0 for USB storage, or wd0 for internal storage @@ -39,20 +50,23 @@ OpenBSDInstallPart4 OpenBSDInstallMBRPart1 -dnl not until we have boot blocks... and then we'll probably need to -dnl add text to mention the necessary little boot partition... dnl OpenBSDInstallMBRPart2 The fdisk(8) utility will be invoked to let you edit your MBR partitioning. The current MBR partitions defined will be displayed and you will be allowed to modify them, and add new partitions. + The setup will need one 'Linux files' partition and an 'OpenBSD' + partition. If you use the whole disk option, the install script + will create a small 'Linux files' partition and use the rest of + the disk for the OpenBSD installation. + After your OpenBSD MBR partition has been setup, the real partition setup can follow. OpenBSDInstallPart5({:- - If you have left Linux partitions defined on the disk, these will - usually show up as partition 'i', 'j' and so on.-:}) + Linux partitions defined on the disk will usually show up as + partition 'i', 'j' and so on.-:}) OpenBSDInstallPart6({:-CD-ROM, -:}) @@ -69,12 +83,6 @@ dnl OpenBSDTAPEInstall dnl OpenBSDInstallWrapup - As the OpenBSD/MACHINE port is very new, there is not yet a proper - bootloader installation. In addition to these steps, you will need, - for the time being, to copy either a bootblock or the kernel image - itself to the Linux partition and boot from it. This annoyance is - being worked on and should disappear very soon. - Lemote systems final steps: Lemote systems ship with a boot menu. After the installation @@ -152,10 +160,10 @@ OpenBSDInstallWrapup PMON> set al "" PMON> set ShowBootMenu no - Then boot into linux and rename /boot/boot.cfg so that - it does not get found by PMON. At the next reboot - the Fuloong 2F will boot into the PMON - prompt on the serial console. + If you have a dual boot setup, mount the Linux boot partition + and rename /boot/boot.cfg so that it does not get found by + PMON. This will enable full serial access to PMON on + the Fuloong 2F. Gdium systems final steps: |