summaryrefslogtreecommitdiff
path: root/distrib/notes/pc532
diff options
context:
space:
mode:
Diffstat (limited to 'distrib/notes/pc532')
-rw-r--r--distrib/notes/pc532/install20
1 files changed, 10 insertions, 10 deletions
diff --git a/distrib/notes/pc532/install b/distrib/notes/pc532/install
index 4ebe7fae92f..5c1a984654d 100644
--- a/distrib/notes/pc532/install
+++ b/distrib/notes/pc532/install
@@ -2,7 +2,7 @@
your system, see the next section.)
To install OpenBSD/pc532, there are several things you need to know.
-First, OpenBSD "autoconfigs" the scsi devices. inst-11.fs has only
+First, OpenBSD "autoconfigs" the scsi devices. inst-20.fs has only
support for disks configured into the kernel. Starting the search at
SCSI address 0, lun 0 and increasing, the first disk found will be sd0
regardless of the address, the second will be sd1. KLONDIKE for example
@@ -15,7 +15,7 @@ has the following devices installed:
cd0 -> ID 3 LUN 0: Toshiba XM-4101TA CD-ROM drive
st0 -> ID 4 LUN 0: Tandberg TDC3600 QIC tape drive
-Only sd0-sd3 are supported by the inst-11.fs kernel.
+Only sd0-sd3 are supported by the inst-20.fs kernel.
Next you need to know what the install script wants to do. This install
is script on the ram disk root that can do most of the work of configuring
@@ -41,15 +41,15 @@ your disk.
The Install Procedure:
a) Adjust your console device settings.
- The inst-11.fs kernel will come up with 9600 baud, 7 bits,
+ The inst-20.fs kernel will come up with 9600 baud, 7 bits,
even parity and one stop bit. Adjust your terminal to match
these settings. The monitor's baud rate can be changed with
"baud d'9600".
- b) Get inst-11.fs and boot the kernel.
+ b) Get inst-20.fs and boot the kernel.
From Floppy: (and using the autoboot monitor)
- If you have a 1.44 meg SCSI floppy drive, you can put inst-11.fs
+ If you have a 1.44 meg SCSI floppy drive, you can put inst-20.fs
onto a 3.5" floppy disk. Insert the disk into your floppy
drive and use the monitor's boot command to boot the default
image from the floppy. The image booted will ask you for a
@@ -58,8 +58,8 @@ The Install Procedure:
Replace X with your drive number. For KLONDIKE X would be "2".
Tape:
- You will need to load a copy of inst-11.fs into RAM.
- - load the inst-11.fs at 0x288000
+ You will need to load a copy of inst-20.fs into RAM.
+ - load the inst-20.fs at 0x288000
- run at 0x3E8820
The boot program will ask you now for a kernel to load. Answer
rd0a:/bsd
@@ -71,7 +71,7 @@ The Install Procedure:
output to standard output a byte sequence used by the pc532
ROM monitor to download a binary file into RAM. Using this
program on a computer connected to the pc532, one can
- load a copy of inst-11.fs into RAM at 0x288000. The boot
+ load a copy of inst-20.fs into RAM at 0x288000. The boot
sequence is now the same as with tape.
c) Choose a disk geometry. For me, the reported geometry left
@@ -81,7 +81,7 @@ The Install Procedure:
2053880 sectors.
To help in this process, there is a program "factor" that is
- on the inst-11.fs. The usage is "factor number" and it lists
+ on the inst-20.fs. The usage is "factor number" and it lists
the prime factors of number.
For example, with the 2053880 sector disk I got:
@@ -116,7 +116,7 @@ The Install Procedure:
partitions, it will ask for a mount point. The mount point will
be "relative to /" and should not include the leading "/". Also,
IF you do not want the partition to have newfs run on it (that is
- it might be the last one and have a copy of inst-11.fs) enter "NO"
+ it might be the last one and have a copy of inst-20.fs) enter "NO"
to the mount point and it will not run newfs on the partition.
It will enter the partition into the disklabel.