diff options
Diffstat (limited to 'distrib/notes')
| -rw-r--r-- | distrib/notes/octeon/install | 16 |
1 files changed, 11 insertions, 5 deletions
diff --git a/distrib/notes/octeon/install b/distrib/notes/octeon/install index ea2265bacb5..7376c7051d7 100644 --- a/distrib/notes/octeon/install +++ b/distrib/notes/octeon/install @@ -1,4 +1,4 @@ -dnl $OpenBSD: install,v 1.16 2017/11/30 15:25:37 visa Exp $ +dnl $OpenBSD: install,v 1.17 2018/12/21 14:33:43 visa Exp $ OpenBSDInstallPrelude OpenBSDInstallPart2 @@ -56,8 +56,8 @@ restore it later if needed: ${bootcmd} is run by U-Boot when ${autoload} is enabled. Now create a new ${bootcmd} which will load an ELF file called 'bsd' from the first active FAT -partition on the first CF card or USB device. The FAT partition has been created -by the installer. +partition on the first CF card. The FAT partition has been created by the +installer. # setenv bootcmd 'fatload ide 0:1 ${loadaddr} bsd;bootoctlinux rootdev=/dev/octcf0' # setenv bootdelay 5 @@ -71,9 +71,15 @@ by the installer. Protected 1 sectors # -If you have installed onto USB use the following bootcmd instead: +If you have installed onto SD/MMC, SATA or USB, use the following +bootcmd instead: - fatload usb 0 ${loadaddr} bsd; bootoctlinux rootdev=sd0 + fatload <bootdev> 0 ${loadaddr} bsd; bootoctlinux rootdev=sd0 + +Replace ``<bootdev>'' with ``mmc'', ``sata'' or ``usb'' as appropriate. + +For stable root disk selection, you can use the root disk's +disklabel(8) UID (DUID) as the value of the rootdev parameter. On multi-core systems, the numcores parameter enables the secondary CPUs. Use the total number of cores on your system as the value of the parameter. |