diff options
Diffstat (limited to 'distrib/sun3/common/install.md')
| -rw-r--r-- | distrib/sun3/common/install.md | 262 |
1 files changed, 262 insertions, 0 deletions
diff --git a/distrib/sun3/common/install.md b/distrib/sun3/common/install.md new file mode 100644 index 00000000000..bacf9d71ee9 --- /dev/null +++ b/distrib/sun3/common/install.md @@ -0,0 +1,262 @@ +# $NetBSD: install.md,v 1.2.2.1 1996/08/29 03:33:48 gwr Exp $ +# +# +# Copyright (c) 1996 The NetBSD Foundation, Inc. +# All rights reserved. +# +# This code is derived from software contributed to The NetBSD Foundation +# by Jason R. Thorpe. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in the +# documentation and/or other materials provided with the distribution. +# 3. All advertising materials mentioning features or use of this software +# must display the following acknowledgement: +# This product includes software developed by the NetBSD +# Foundation, Inc. and its contributors. +# 4. Neither the name of The NetBSD Foundation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS +# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED +# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE +# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +# +# machine dependent section of installation/upgrade script. +# + +# Machine-dependent install sets +# MDSETS="xbin xman xinc xcon" XXX +MDSETS="" + +md_set_term() { + if [ ! -z "$TERM" ]; then + return + fi + echo -n "Specify terminal type [sun]: " + getresp "sun" + TERM="$resp" + export TERM +} + +__mount_kernfs() { + # Make sure kernfs is mounted. + if [ ! -d /kern -o ! -e /kern/msgbuf ]; then + mkdir /kern > /dev/null 2>&1 + /sbin/mount_kernfs /kern /kern >/dev/null 2>&1 + fi +} + +md_makerootwritable() { + # Just remount the root device read-write. + if [ ! -e /tmp/.root_writable ]; then + __mount_kernfs + echo "Remounting root read-write..." + mount -u /kern/rootdev / + cp /dev/null /tmp/.root_writable + fi +} + +md_get_diskdevs() { + # return available disk devices + __mount_kernfs + sed -n -e '/^sd[0-9] /s/ .*//p' \ + -e '/^xd[0-9] /s/ .*//p' \ + -e '/^xy[0-9] /s/ .*//p' \ + < /kern/msgbuf | sort -u +} + +md_get_cddevs() { + # return available CDROM devices + __mount_kernfs + sed -n -e '/^cd[0-9] /s/ .*//p' \ + < /kern/msgbuf | sort -u +} + +md_get_ifdevs() { + # return available network devices + __mount_kernfs + sed -n -e '/^ie[0-9] /s/ .*//p' \ + -e '/^le[0-9] /s/ .*//p' \ + < /kern/msgbuf | sort -u +} + +md_get_partition_range() { + # return an expression describing the valid partition id's + echo '[a-h]' +} + +md_installboot() { + # install the boot block on disk $1 + echo "Installing boot block..." + ( cd /usr/mdec ;\ + cp -p ./ufsboot /mnt/ufsboot ;\ + sync ; sleep 1 ; sync ;\ + ./installboot -v /mnt/ufsboot bootxx /dev/r${1}a ) + echo "done." +} + +md_native_fstype() { +} + +md_native_fsopts() { +} + +md_checkfordisklabel() { + # $1 is the disk to check + local rval + + disklabel $1 > /dev/null 2> /tmp/checkfordisklabel + if grep "no disk label" /tmp/checkfordisklabel; then + rval=1 + elif grep "disk label corrupted" /tmp/checkfordisklabel; then + rval=2 + else + rval=0 + fi + + rm -f /tmp/checkfordisklabel + return $rval +} + +md_prep_disklabel() +{ + local _disk + + _disk=$1 + md_checkfordisklabel $_disk + case $? in + 0) + echo -n "Do you wish to edit the disklabel on $_disk? [y]" + ;; + 1) + echo "WARNING: Disk $_disk has no label" + echo -n "Do you want to create one with the disklabel editor? [y]" + ;; + 2) + echo "WARNING: Label on disk $_disk is corrupted" + echo -n "Do you want to try and repair the damage using the disklabel editor? [y]" + ;; + esac + + getresp "y" + case "$resp" in + y*|Y*) ;; + *) return ;; + esac + + # display example + cat << \__md_prep_disklabel_1 + +Here is an example of what the partition information will look like once +you have entered the disklabel editor. Disk partition sizes and offsets +are in sector (most likely 512 bytes) units. Make sure these size/offset +pairs are on cylinder boundaries (the number of sector per cylinder is +given in the `sectors/cylinder' entry, which is not shown here). + +Do not change any parameters except the partition layout and the label name. +It's probably also wisest not to touch the `8 partitions:' line, even +in case you have defined less than eight partitions. + +[Example] +8 partitions: +# size offset fstype [fsize bsize cpg] + a: 50176 0 4.2BSD 1024 8192 16 # (Cyl. 0 - 111) + b: 64512 50176 swap # (Cyl. 112 - 255) + c: 640192 0 unknown # (Cyl. 0 - 1428) + d: 525504 114688 4.2BSD 1024 8192 16 # (Cyl. 256 - 1428) +[End of example] + +__md_prep_disklabel_1 + echo -n "Press [Enter] to continue " + getresp "" + edlabel /dev/r${_disk}c +} + +md_copy_kernel() { + echo -n "Copying kernel..." + cp -p /netbsd /mnt/netbsd + echo "done." +} + +md_welcome_banner() { + if [ "$MODE" = "install" ]; then + echo "" + echo "Welcome to the NetBSD/sun3 ${VERSION} installation program." + cat << \__welcome_banner_1 + +This program is designed to help you put NetBSD on your disk, +in a simple and rational way. You'll be asked several questions, +and it would probably be useful to have your disk's hardware +manual, the installation notes, and a calculator handy. +__welcome_banner_1 + + else + echo "" + echo "Welcome to the NetBSD/sun3 ${VERSION} upgrade program." + cat << \__welcome_banner_2 + +This program is designed to help you upgrade your NetBSD system in a +simple and rational way. + +As a reminder, installing the `etc' binary set is NOT recommended. +Once the rest of your system has been upgraded, you should manually +merge any changes to files in the `etc' set into those files which +already exist on your system. +__welcome_banner_2 + fi + +cat << \__welcome_banner_3 + +As with anything which modifies your disk's contents, this +program can cause SIGNIFICANT data loss, and you are advised +to make sure your data is backed up before beginning the +installation process. + +Default answers are displayed in brackets after the questions. +You can hit Control-C at any time to quit, but if you do so at a +prompt, you may have to hit return. Also, quitting in the middle of +installation may leave your system in an inconsistent state. + +__welcome_banner_3 +} + +md_not_going_to_install() { + cat << \__not_going_to_install_1 + +OK, then. Enter `halt' at the prompt to halt the machine. Once the +machine has halted, power-cycle the system to load new boot code. + +__not_going_to_install_1 +} + +md_congrats() { + local what; + if [ "$MODE" = "install" ]; then + what="installed"; + else + what="upgraded"; + fi + cat << __congratulations_1 + +CONGRATULATIONS! You have successfully $what NetBSD! +To boot the installed system, enter halt at the command prompt. Once the +system has halted, reset the machine and boot from the disk. + +__congratulations_1 +} |