diff options
Diffstat (limited to 'gnu/egcs/gcc/jump.c')
| -rw-r--r-- | gnu/egcs/gcc/jump.c | 5123 |
1 files changed, 5123 insertions, 0 deletions
diff --git a/gnu/egcs/gcc/jump.c b/gnu/egcs/gcc/jump.c new file mode 100644 index 00000000000..9b727fa32c8 --- /dev/null +++ b/gnu/egcs/gcc/jump.c @@ -0,0 +1,5123 @@ +/* Optimize jump instructions, for GNU compiler. + Copyright (C) 1987, 88, 89, 91-98, 1999 Free Software Foundation, Inc. + +This file is part of GNU CC. + +GNU CC is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +GNU CC is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GNU CC; see the file COPYING. If not, write to +the Free Software Foundation, 59 Temple Place - Suite 330, +Boston, MA 02111-1307, USA. */ + + +/* This is the jump-optimization pass of the compiler. + It is run two or three times: once before cse, sometimes once after cse, + and once after reload (before final). + + jump_optimize deletes unreachable code and labels that are not used. + It also deletes jumps that jump to the following insn, + and simplifies jumps around unconditional jumps and jumps + to unconditional jumps. + + Each CODE_LABEL has a count of the times it is used + stored in the LABEL_NUSES internal field, and each JUMP_INSN + has one label that it refers to stored in the + JUMP_LABEL internal field. With this we can detect labels that + become unused because of the deletion of all the jumps that + formerly used them. The JUMP_LABEL info is sometimes looked + at by later passes. + + Optionally, cross-jumping can be done. Currently it is done + only the last time (when after reload and before final). + In fact, the code for cross-jumping now assumes that register + allocation has been done, since it uses `rtx_renumbered_equal_p'. + + Jump optimization is done after cse when cse's constant-propagation + causes jumps to become unconditional or to be deleted. + + Unreachable loops are not detected here, because the labels + have references and the insns appear reachable from the labels. + find_basic_blocks in flow.c finds and deletes such loops. + + The subroutines delete_insn, redirect_jump, and invert_jump are used + from other passes as well. */ + +#include "config.h" +#include "system.h" +#include "rtl.h" +#include "flags.h" +#include "hard-reg-set.h" +#include "regs.h" +#include "insn-config.h" +#include "insn-flags.h" +#include "insn-attr.h" +#include "recog.h" +#include "expr.h" +#include "real.h" +#include "except.h" +#include "toplev.h" + +/* ??? Eventually must record somehow the labels used by jumps + from nested functions. */ +/* Pre-record the next or previous real insn for each label? + No, this pass is very fast anyway. */ +/* Condense consecutive labels? + This would make life analysis faster, maybe. */ +/* Optimize jump y; x: ... y: jumpif... x? + Don't know if it is worth bothering with. */ +/* Optimize two cases of conditional jump to conditional jump? + This can never delete any instruction or make anything dead, + or even change what is live at any point. + So perhaps let combiner do it. */ + +/* Vector indexed by uid. + For each CODE_LABEL, index by its uid to get first unconditional jump + that jumps to the label. + For each JUMP_INSN, index by its uid to get the next unconditional jump + that jumps to the same label. + Element 0 is the start of a chain of all return insns. + (It is safe to use element 0 because insn uid 0 is not used. */ + +static rtx *jump_chain; + +/* List of labels referred to from initializers. + These can never be deleted. */ +rtx forced_labels; + +/* Maximum index in jump_chain. */ + +static int max_jump_chain; + +/* Set nonzero by jump_optimize if control can fall through + to the end of the function. */ +int can_reach_end; + +/* Indicates whether death notes are significant in cross jump analysis. + Normally they are not significant, because of A and B jump to C, + and R dies in A, it must die in B. But this might not be true after + stack register conversion, and we must compare death notes in that + case. */ + +static int cross_jump_death_matters = 0; + +static int init_label_info PROTO((rtx)); +static void delete_barrier_successors PROTO((rtx)); +static void mark_all_labels PROTO((rtx, int)); +static rtx delete_unreferenced_labels PROTO((rtx)); +static void delete_noop_moves PROTO((rtx)); +static int calculate_can_reach_end PROTO((rtx, int, int)); +static int duplicate_loop_exit_test PROTO((rtx)); +static void find_cross_jump PROTO((rtx, rtx, int, rtx *, rtx *)); +static void do_cross_jump PROTO((rtx, rtx, rtx)); +static int jump_back_p PROTO((rtx, rtx)); +static int tension_vector_labels PROTO((rtx, int)); +static void mark_jump_label PROTO((rtx, rtx, int)); +static void delete_computation PROTO((rtx)); +static void delete_from_jump_chain PROTO((rtx)); +static int delete_labelref_insn PROTO((rtx, rtx, int)); +static void mark_modified_reg PROTO((rtx, rtx)); +static void redirect_tablejump PROTO((rtx, rtx)); +static void jump_optimize_1 PROTO ((rtx, int, int, int, int)); +#ifndef HAVE_cc0 +static rtx find_insert_position PROTO((rtx, rtx)); +#endif + +/* Main external entry point into the jump optimizer. See comments before + jump_optimize_1 for descriptions of the arguments. */ +void +jump_optimize (f, cross_jump, noop_moves, after_regscan) + rtx f; + int cross_jump; + int noop_moves; + int after_regscan; +{ + jump_optimize_1 (f, cross_jump, noop_moves, after_regscan, 0); +} + +/* Alternate entry into the jump optimizer. This entry point only rebuilds + the JUMP_LABEL field in jumping insns and REG_LABEL notes in non-jumping + instructions. */ +void +rebuild_jump_labels (f) + rtx f; +{ + jump_optimize_1 (f, 0, 0, 0, 1); +} + + +/* Delete no-op jumps and optimize jumps to jumps + and jumps around jumps. + Delete unused labels and unreachable code. + + If CROSS_JUMP is 1, detect matching code + before a jump and its destination and unify them. + If CROSS_JUMP is 2, do cross-jumping, but pay attention to death notes. + + If NOOP_MOVES is nonzero, delete no-op move insns. + + If AFTER_REGSCAN is nonzero, then this jump pass is being run immediately + after regscan, and it is safe to use regno_first_uid and regno_last_uid. + + If MARK_LABELS_ONLY is nonzero, then we only rebuild the jump chain + and JUMP_LABEL field for jumping insns. + + If `optimize' is zero, don't change any code, + just determine whether control drops off the end of the function. + This case occurs when we have -W and not -O. + It works because `delete_insn' checks the value of `optimize' + and refrains from actually deleting when that is 0. */ + +static void +jump_optimize_1 (f, cross_jump, noop_moves, after_regscan, mark_labels_only) + rtx f; + int cross_jump; + int noop_moves; + int after_regscan; + int mark_labels_only; +{ + register rtx insn, next; + int changed; + int old_max_reg; + int first = 1; + int max_uid = 0; + rtx last_insn; + + cross_jump_death_matters = (cross_jump == 2); + max_uid = init_label_info (f) + 1; + + /* If we are performing cross jump optimizations, then initialize + tables mapping UIDs to EH regions to avoid incorrect movement + of insns from one EH region to another. */ + if (flag_exceptions && cross_jump) + init_insn_eh_region (f, max_uid); + + delete_barrier_successors (f); + + /* Leave some extra room for labels and duplicate exit test insns + we make. */ + max_jump_chain = max_uid * 14 / 10; + jump_chain = (rtx *) alloca (max_jump_chain * sizeof (rtx)); + bzero ((char *) jump_chain, max_jump_chain * sizeof (rtx)); + + mark_all_labels (f, cross_jump); + + /* Keep track of labels used from static data; + they cannot ever be deleted. */ + + for (insn = forced_labels; insn; insn = XEXP (insn, 1)) + LABEL_NUSES (XEXP (insn, 0))++; + + check_exception_handler_labels (); + + /* Keep track of labels used for marking handlers for exception + regions; they cannot usually be deleted. */ + + for (insn = exception_handler_labels; insn; insn = XEXP (insn, 1)) + LABEL_NUSES (XEXP (insn, 0))++; + + /* Quit now if we just wanted to rebuild the JUMP_LABEL and REG_LABEL + notes and recompute LABEL_NUSES. */ + if (mark_labels_only) + return; + + exception_optimize (); + + last_insn = delete_unreferenced_labels (f); + + if (!optimize) + { + can_reach_end = calculate_can_reach_end (last_insn, 1, 0); + + /* Zero the "deleted" flag of all the "deleted" insns. */ + for (insn = f; insn; insn = NEXT_INSN (insn)) + INSN_DELETED_P (insn) = 0; + + /* Show that the jump chain is not valid. */ + jump_chain = 0; + return; + } + +#ifdef HAVE_return + if (HAVE_return) + { + /* If we fall through to the epilogue, see if we can insert a RETURN insn + in front of it. If the machine allows it at this point (we might be + after reload for a leaf routine), it will improve optimization for it + to be there. */ + insn = get_last_insn (); + while (insn && GET_CODE (insn) == NOTE) + insn = PREV_INSN (insn); + + if (insn && GET_CODE (insn) != BARRIER) + { + emit_jump_insn (gen_return ()); + emit_barrier (); + } + } +#endif + + if (noop_moves) + delete_noop_moves (f); + + /* If we haven't yet gotten to reload and we have just run regscan, + delete any insn that sets a register that isn't used elsewhere. + This helps some of the optimizations below by having less insns + being jumped around. */ + + if (! reload_completed && after_regscan) + for (insn = f; insn; insn = next) + { + rtx set = single_set (insn); + + next = NEXT_INSN (insn); + + if (set && GET_CODE (SET_DEST (set)) == REG + && REGNO (SET_DEST (set)) >= FIRST_PSEUDO_REGISTER + && REGNO_FIRST_UID (REGNO (SET_DEST (set))) == INSN_UID (insn) + /* We use regno_last_note_uid so as not to delete the setting + of a reg that's used in notes. A subsequent optimization + might arrange to use that reg for real. */ + && REGNO_LAST_NOTE_UID (REGNO (SET_DEST (set))) == INSN_UID (insn) + && ! side_effects_p (SET_SRC (set)) + && ! find_reg_note (insn, REG_RETVAL, 0)) + delete_insn (insn); + } + + /* Now iterate optimizing jumps until nothing changes over one pass. */ + changed = 1; + old_max_reg = max_reg_num (); + while (changed) + { + changed = 0; + + for (insn = f; insn; insn = next) + { + rtx reallabelprev; + rtx temp, temp1, temp2, temp3, temp4, temp5, temp6; + rtx nlabel; + int this_is_simplejump, this_is_condjump, reversep = 0; + int this_is_condjump_in_parallel; + +#if 0 + /* If NOT the first iteration, if this is the last jump pass + (just before final), do the special peephole optimizations. + Avoiding the first iteration gives ordinary jump opts + a chance to work before peephole opts. */ + + if (reload_completed && !first && !flag_no_peephole) + if (GET_CODE (insn) == INSN || GET_CODE (insn) == JUMP_INSN) + peephole (insn); +#endif + + /* That could have deleted some insns after INSN, so check now + what the following insn is. */ + + next = NEXT_INSN (insn); + + /* See if this is a NOTE_INSN_LOOP_BEG followed by an unconditional + jump. Try to optimize by duplicating the loop exit test if so. + This is only safe immediately after regscan, because it uses + the values of regno_first_uid and regno_last_uid. */ + if (after_regscan && GET_CODE (insn) == NOTE + && NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG + && (temp1 = next_nonnote_insn (insn)) != 0 + && simplejump_p (temp1)) + { + temp = PREV_INSN (insn); + if (duplicate_loop_exit_test (insn)) + { + changed = 1; + next = NEXT_INSN (temp); + continue; + } + } + + if (GET_CODE (insn) != JUMP_INSN) + continue; + + this_is_simplejump = simplejump_p (insn); + this_is_condjump = condjump_p (insn); + this_is_condjump_in_parallel = condjump_in_parallel_p (insn); + + /* Tension the labels in dispatch tables. */ + + if (GET_CODE (PATTERN (insn)) == ADDR_VEC) + changed |= tension_vector_labels (PATTERN (insn), 0); + if (GET_CODE (PATTERN (insn)) == ADDR_DIFF_VEC) + changed |= tension_vector_labels (PATTERN (insn), 1); + + /* If a dispatch table always goes to the same place, + get rid of it and replace the insn that uses it. */ + + if (GET_CODE (PATTERN (insn)) == ADDR_VEC + || GET_CODE (PATTERN (insn)) == ADDR_DIFF_VEC) + { + int i; + rtx pat = PATTERN (insn); + int diff_vec_p = GET_CODE (PATTERN (insn)) == ADDR_DIFF_VEC; + int len = XVECLEN (pat, diff_vec_p); + rtx dispatch = prev_real_insn (insn); + + for (i = 0; i < len; i++) + if (XEXP (XVECEXP (pat, diff_vec_p, i), 0) + != XEXP (XVECEXP (pat, diff_vec_p, 0), 0)) + break; + if (i == len + && dispatch != 0 + && GET_CODE (dispatch) == JUMP_INSN + && JUMP_LABEL (dispatch) != 0 + /* Don't mess with a casesi insn. */ + && !(GET_CODE (PATTERN (dispatch)) == SET + && (GET_CODE (SET_SRC (PATTERN (dispatch))) + == IF_THEN_ELSE)) + && next_real_insn (JUMP_LABEL (dispatch)) == insn) + { + redirect_tablejump (dispatch, + XEXP (XVECEXP (pat, diff_vec_p, 0), 0)); + changed = 1; + } + } + + reallabelprev = prev_active_insn (JUMP_LABEL (insn)); + + /* If a jump references the end of the function, try to turn + it into a RETURN insn, possibly a conditional one. */ + if (JUMP_LABEL (insn) + && (next_active_insn (JUMP_LABEL (insn)) == 0 + || GET_CODE (PATTERN (next_active_insn (JUMP_LABEL (insn)))) + == RETURN)) + changed |= redirect_jump (insn, NULL_RTX); + + /* Detect jump to following insn. */ + if (reallabelprev == insn && condjump_p (insn)) + { + next = next_real_insn (JUMP_LABEL (insn)); + delete_jump (insn); + changed = 1; + continue; + } + + /* If we have an unconditional jump preceded by a USE, try to put + the USE before the target and jump there. This simplifies many + of the optimizations below since we don't have to worry about + dealing with these USE insns. We only do this if the label + being branch to already has the identical USE or if code + never falls through to that label. */ + + if (this_is_simplejump + && (temp = prev_nonnote_insn (insn)) != 0 + && GET_CODE (temp) == INSN && GET_CODE (PATTERN (temp)) == USE + && (temp1 = prev_nonnote_insn (JUMP_LABEL (insn))) != 0 + && (GET_CODE (temp1) == BARRIER + || (GET_CODE (temp1) == INSN + && rtx_equal_p (PATTERN (temp), PATTERN (temp1)))) + /* Don't do this optimization if we have a loop containing only + the USE instruction, and the loop start label has a usage + count of 1. This is because we will redo this optimization + everytime through the outer loop, and jump opt will never + exit. */ + && ! ((temp2 = prev_nonnote_insn (temp)) != 0 + && temp2 == JUMP_LABEL (insn) + && LABEL_NUSES (temp2) == 1)) + { + if (GET_CODE (temp1) == BARRIER) + { + emit_insn_after (PATTERN (temp), temp1); + temp1 = NEXT_INSN (temp1); + } + + delete_insn (temp); + redirect_jump (insn, get_label_before (temp1)); + reallabelprev = prev_real_insn (temp1); + changed = 1; + } + + /* Simplify if (...) x = a; else x = b; by converting it + to x = b; if (...) x = a; + if B is sufficiently simple, the test doesn't involve X, + and nothing in the test modifies B or X. + + If we have small register classes, we also can't do this if X + is a hard register. + + If the "x = b;" insn has any REG_NOTES, we don't do this because + of the possibility that we are running after CSE and there is a + REG_EQUAL note that is only valid if the branch has already been + taken. If we move the insn with the REG_EQUAL note, we may + fold the comparison to always be false in a later CSE pass. + (We could also delete the REG_NOTES when moving the insn, but it + seems simpler to not move it.) An exception is that we can move + the insn if the only note is a REG_EQUAL or REG_EQUIV whose + value is the same as "b". + + INSN is the branch over the `else' part. + + We set: + + TEMP to the jump insn preceding "x = a;" + TEMP1 to X + TEMP2 to the insn that sets "x = b;" + TEMP3 to the insn that sets "x = a;" + TEMP4 to the set of "x = b"; */ + + if (this_is_simplejump + && (temp3 = prev_active_insn (insn)) != 0 + && GET_CODE (temp3) == INSN + && (temp4 = single_set (temp3)) != 0 + && GET_CODE (temp1 = SET_DEST (temp4)) == REG + && (! SMALL_REGISTER_CLASSES + || REGNO (temp1) >= FIRST_PSEUDO_REGISTER) + && (temp2 = next_active_insn (insn)) != 0 + && GET_CODE (temp2) == INSN + && (temp4 = single_set (temp2)) != 0 + && rtx_equal_p (SET_DEST (temp4), temp1) + && ! side_effects_p (SET_SRC (temp4)) + && ! may_trap_p (SET_SRC (temp4)) + && (REG_NOTES (temp2) == 0 + || ((REG_NOTE_KIND (REG_NOTES (temp2)) == REG_EQUAL + || REG_NOTE_KIND (REG_NOTES (temp2)) == REG_EQUIV) + && XEXP (REG_NOTES (temp2), 1) == 0 + && rtx_equal_p (XEXP (REG_NOTES (temp2), 0), + SET_SRC (temp4)))) + && (temp = prev_active_insn (temp3)) != 0 + && condjump_p (temp) && ! simplejump_p (temp) + /* TEMP must skip over the "x = a;" insn */ + && prev_real_insn (JUMP_LABEL (temp)) == insn + && no_labels_between_p (insn, JUMP_LABEL (temp)) + /* There must be no other entries to the "x = b;" insn. */ + && no_labels_between_p (JUMP_LABEL (temp), temp2) + /* INSN must either branch to the insn after TEMP2 or the insn + after TEMP2 must branch to the same place as INSN. */ + && (reallabelprev == temp2 + || ((temp5 = next_active_insn (temp2)) != 0 + && simplejump_p (temp5) + && JUMP_LABEL (temp5) == JUMP_LABEL (insn)))) + { + /* The test expression, X, may be a complicated test with + multiple branches. See if we can find all the uses of + the label that TEMP branches to without hitting a CALL_INSN + or a jump to somewhere else. */ + rtx target = JUMP_LABEL (temp); + int nuses = LABEL_NUSES (target); + rtx p; +#ifdef HAVE_cc0 + rtx q; +#endif + + /* Set P to the first jump insn that goes around "x = a;". */ + for (p = temp; nuses && p; p = prev_nonnote_insn (p)) + { + if (GET_CODE (p) == JUMP_INSN) + { + if (condjump_p (p) && ! simplejump_p (p) + && JUMP_LABEL (p) == target) + { + nuses--; + if (nuses == 0) + break; + } + else + break; + } + else if (GET_CODE (p) == CALL_INSN) + break; + } + +#ifdef HAVE_cc0 + /* We cannot insert anything between a set of cc and its use + so if P uses cc0, we must back up to the previous insn. */ + q = prev_nonnote_insn (p); + if (q && GET_RTX_CLASS (GET_CODE (q)) == 'i' + && sets_cc0_p (PATTERN (q))) + p = q; +#endif + + if (p) + p = PREV_INSN (p); + + /* If we found all the uses and there was no data conflict, we + can move the assignment unless we can branch into the middle + from somewhere. */ + if (nuses == 0 && p + && no_labels_between_p (p, insn) + && ! reg_referenced_between_p (temp1, p, NEXT_INSN (temp3)) + && ! reg_set_between_p (temp1, p, temp3) + && (GET_CODE (SET_SRC (temp4)) == CONST_INT + || ! modified_between_p (SET_SRC (temp4), p, temp2)) + /* Verify that registers used by the jump are not clobbered + by the instruction being moved. */ + && ! regs_set_between_p (PATTERN (temp), + PREV_INSN (temp2), + NEXT_INSN (temp2))) + { + emit_insn_after_with_line_notes (PATTERN (temp2), p, temp2); + delete_insn (temp2); + + /* Set NEXT to an insn that we know won't go away. */ + next = next_active_insn (insn); + + /* Delete the jump around the set. Note that we must do + this before we redirect the test jumps so that it won't + delete the code immediately following the assignment + we moved (which might be a jump). */ + + delete_insn (insn); + + /* We either have two consecutive labels or a jump to + a jump, so adjust all the JUMP_INSNs to branch to where + INSN branches to. */ + for (p = NEXT_INSN (p); p != next; p = NEXT_INSN (p)) + if (GET_CODE (p) == JUMP_INSN) + redirect_jump (p, target); + + changed = 1; + continue; + } + } + + /* Simplify if (...) { x = a; goto l; } x = b; by converting it + to x = a; if (...) goto l; x = b; + if A is sufficiently simple, the test doesn't involve X, + and nothing in the test modifies A or X. + + If we have small register classes, we also can't do this if X + is a hard register. + + If the "x = a;" insn has any REG_NOTES, we don't do this because + of the possibility that we are running after CSE and there is a + REG_EQUAL note that is only valid if the branch has already been + taken. If we move the insn with the REG_EQUAL note, we may + fold the comparison to always be false in a later CSE pass. + (We could also delete the REG_NOTES when moving the insn, but it + seems simpler to not move it.) An exception is that we can move + the insn if the only note is a REG_EQUAL or REG_EQUIV whose + value is the same as "a". + + INSN is the goto. + + We set: + + TEMP to the jump insn preceding "x = a;" + TEMP1 to X + TEMP2 to the insn that sets "x = b;" + TEMP3 to the insn that sets "x = a;" + TEMP4 to the set of "x = a"; */ + + if (this_is_simplejump + && (temp2 = next_active_insn (insn)) != 0 + && GET_CODE (temp2) == INSN + && (temp4 = single_set (temp2)) != 0 + && GET_CODE (temp1 = SET_DEST (temp4)) == REG + && (! SMALL_REGISTER_CLASSES + || REGNO (temp1) >= FIRST_PSEUDO_REGISTER) + && (temp3 = prev_active_insn (insn)) != 0 + && GET_CODE (temp3) == INSN + && (temp4 = single_set (temp3)) != 0 + && rtx_equal_p (SET_DEST (temp4), temp1) + && ! side_effects_p (SET_SRC (temp4)) + && ! may_trap_p (SET_SRC (temp4)) + && (REG_NOTES (temp3) == 0 + || ((REG_NOTE_KIND (REG_NOTES (temp3)) == REG_EQUAL + || REG_NOTE_KIND (REG_NOTES (temp3)) == REG_EQUIV) + && XEXP (REG_NOTES (temp3), 1) == 0 + && rtx_equal_p (XEXP (REG_NOTES (temp3), 0), + SET_SRC (temp4)))) + && (temp = prev_active_insn (temp3)) != 0 + && condjump_p (temp) && ! simplejump_p (temp) + /* TEMP must skip over the "x = a;" insn */ + && prev_real_insn (JUMP_LABEL (temp)) == insn + && no_labels_between_p (temp, insn)) + { + rtx prev_label = JUMP_LABEL (temp); + rtx insert_after = prev_nonnote_insn (temp); + +#ifdef HAVE_cc0 + /* We cannot insert anything between a set of cc and its use. */ + if (insert_after && GET_RTX_CLASS (GET_CODE (insert_after)) == 'i' + && sets_cc0_p (PATTERN (insert_after))) + insert_after = prev_nonnote_insn (insert_after); +#endif + ++LABEL_NUSES (prev_label); + + if (insert_after + && no_labels_between_p (insert_after, temp) + && ! reg_referenced_between_p (temp1, insert_after, temp3) + && ! reg_referenced_between_p (temp1, temp3, + NEXT_INSN (temp2)) + && ! reg_set_between_p (temp1, insert_after, temp) + && ! modified_between_p (SET_SRC (temp4), insert_after, temp) + /* Verify that registers used by the jump are not clobbered + by the instruction being moved. */ + && ! regs_set_between_p (PATTERN (temp), + PREV_INSN (temp3), + NEXT_INSN (temp3)) + && invert_jump (temp, JUMP_LABEL (insn))) + { + emit_insn_after_with_line_notes (PATTERN (temp3), + insert_after, temp3); + delete_insn (temp3); + delete_insn (insn); + /* Set NEXT to an insn that we know won't go away. */ + next = temp2; + changed = 1; + } + if (prev_label && --LABEL_NUSES (prev_label) == 0) + delete_insn (prev_label); + if (changed) + continue; + } + +#ifndef HAVE_cc0 + /* If we have if (...) x = exp; and branches are expensive, + EXP is a single insn, does not have any side effects, cannot + trap, and is not too costly, convert this to + t = exp; if (...) x = t; + + Don't do this when we have CC0 because it is unlikely to help + and we'd need to worry about where to place the new insn and + the potential for conflicts. We also can't do this when we have + notes on the insn for the same reason as above. + + We set: + + TEMP to the "x = exp;" insn. + TEMP1 to the single set in the "x = exp;" insn. + TEMP2 to "x". */ + + if (! reload_completed + && this_is_condjump && ! this_is_simplejump + && BRANCH_COST >= 3 + && (temp = next_nonnote_insn (insn)) != 0 + && GET_CODE (temp) == INSN + && REG_NOTES (temp) == 0 + && (reallabelprev == temp + || ((temp2 = next_active_insn (temp)) != 0 + && simplejump_p (temp2) + && JUMP_LABEL (temp2) == JUMP_LABEL (insn))) + && (temp1 = single_set (temp)) != 0 + && (temp2 = SET_DEST (temp1), GET_CODE (temp2) == REG) + && (! SMALL_REGISTER_CLASSES + || REGNO (temp2) >= FIRST_PSEUDO_REGISTER) + && GET_CODE (SET_SRC (temp1)) != REG + && GET_CODE (SET_SRC (temp1)) != SUBREG + && GET_CODE (SET_SRC (temp1)) != CONST_INT + && ! side_effects_p (SET_SRC (temp1)) + && ! may_trap_p (SET_SRC (temp1)) + && rtx_cost (SET_SRC (temp1), SET) < 10) + { + rtx new = gen_reg_rtx (GET_MODE (temp2)); + + if ((temp3 = find_insert_position (insn, temp)) + && validate_change (temp, &SET_DEST (temp1), new, 0)) + { + next = emit_insn_after (gen_move_insn (temp2, new), insn); + emit_insn_after_with_line_notes (PATTERN (temp), + PREV_INSN (temp3), temp); + delete_insn (temp); + reallabelprev = prev_active_insn (JUMP_LABEL (insn)); + + if (after_regscan) + { + reg_scan_update (temp3, NEXT_INSN (next), old_max_reg); + old_max_reg = max_reg_num (); + } + } + } + + /* Similarly, if it takes two insns to compute EXP but they + have the same destination. Here TEMP3 will be the second + insn and TEMP4 the SET from that insn. */ + + if (! reload_completed + && this_is_condjump && ! this_is_simplejump + && BRANCH_COST >= 4 + && (temp = next_nonnote_insn (insn)) != 0 + && GET_CODE (temp) == INSN + && REG_NOTES (temp) == 0 + && (temp3 = next_nonnote_insn (temp)) != 0 + && GET_CODE (temp3) == INSN + && REG_NOTES (temp3) == 0 + && (reallabelprev == temp3 + || ((temp2 = next_active_insn (temp3)) != 0 + && simplejump_p (temp2) + && JUMP_LABEL (temp2) == JUMP_LABEL (insn))) + && (temp1 = single_set (temp)) != 0 + && (temp2 = SET_DEST (temp1), GET_CODE (temp2) == REG) + && GET_MODE_CLASS (GET_MODE (temp2)) == MODE_INT + && (! SMALL_REGISTER_CLASSES + || REGNO (temp2) >= FIRST_PSEUDO_REGISTER) + && ! side_effects_p (SET_SRC (temp1)) + && ! may_trap_p (SET_SRC (temp1)) + && rtx_cost (SET_SRC (temp1), SET) < 10 + && (temp4 = single_set (temp3)) != 0 + && rtx_equal_p (SET_DEST (temp4), temp2) + && ! side_effects_p (SET_SRC (temp4)) + && ! may_trap_p (SET_SRC (temp4)) + && rtx_cost (SET_SRC (temp4), SET) < 10) + { + rtx new = gen_reg_rtx (GET_MODE (temp2)); + + if ((temp5 = find_insert_position (insn, temp)) + && (temp6 = find_insert_position (insn, temp3)) + && validate_change (temp, &SET_DEST (temp1), new, 0)) + { + /* Use the earliest of temp5 and temp6. */ + if (temp5 != insn) + temp6 = temp5; + next = emit_insn_after (gen_move_insn (temp2, new), insn); + emit_insn_after_with_line_notes (PATTERN (temp), + PREV_INSN (temp6), temp); + emit_insn_after_with_line_notes + (replace_rtx (PATTERN (temp3), temp2, new), + PREV_INSN (temp6), temp3); + delete_insn (temp); + delete_insn (temp3); + reallabelprev = prev_active_insn (JUMP_LABEL (insn)); + + if (after_regscan) + { + reg_scan_update (temp6, NEXT_INSN (next), old_max_reg); + old_max_reg = max_reg_num (); + } + } + } + + /* Finally, handle the case where two insns are used to + compute EXP but a temporary register is used. Here we must + ensure that the temporary register is not used anywhere else. */ + + if (! reload_completed + && after_regscan + && this_is_condjump && ! this_is_simplejump + && BRANCH_COST >= 4 + && (temp = next_nonnote_insn (insn)) != 0 + && GET_CODE (temp) == INSN + && REG_NOTES (temp) == 0 + && (temp3 = next_nonnote_insn (temp)) != 0 + && GET_CODE (temp3) == INSN + && REG_NOTES (temp3) == 0 + && (reallabelprev == temp3 + || ((temp2 = next_active_insn (temp3)) != 0 + && simplejump_p (temp2) + && JUMP_LABEL (temp2) == JUMP_LABEL (insn))) + && (temp1 = single_set (temp)) != 0 + && (temp5 = SET_DEST (temp1), + (GET_CODE (temp5) == REG + || (GET_CODE (temp5) == SUBREG + && (temp5 = SUBREG_REG (temp5), + GET_CODE (temp5) == REG)))) + && REGNO (temp5) >= FIRST_PSEUDO_REGISTER + && REGNO_FIRST_UID (REGNO (temp5)) == INSN_UID (temp) + && REGNO_LAST_UID (REGNO (temp5)) == INSN_UID (temp3) + && ! side_effects_p (SET_SRC (temp1)) + && ! may_trap_p (SET_SRC (temp1)) + && rtx_cost (SET_SRC (temp1), SET) < 10 + && (temp4 = single_set (temp3)) != 0 + && (temp2 = SET_DEST (temp4), GET_CODE (temp2) == REG) + && GET_MODE_CLASS (GET_MODE (temp2)) == MODE_INT + && (! SMALL_REGISTER_CLASSES + || REGNO (temp2) >= FIRST_PSEUDO_REGISTER) + && rtx_equal_p (SET_DEST (temp4), temp2) + && ! side_effects_p (SET_SRC (temp4)) + && ! may_trap_p (SET_SRC (temp4)) + && rtx_cost (SET_SRC (temp4), SET) < 10) + { + rtx new = gen_reg_rtx (GET_MODE (temp2)); + + if ((temp5 = find_insert_position (insn, temp)) + && (temp6 = find_insert_position (insn, temp3)) + && validate_change (temp3, &SET_DEST (temp4), new, 0)) + { + /* Use the earliest of temp5 and temp6. */ + if (temp5 != insn) + temp6 = temp5; + next = emit_insn_after (gen_move_insn (temp2, new), insn); + emit_insn_after_with_line_notes (PATTERN (temp), + PREV_INSN (temp6), temp); + emit_insn_after_with_line_notes (PATTERN (temp3), + PREV_INSN (temp6), temp3); + delete_insn (temp); + delete_insn (temp3); + reallabelprev = prev_active_insn (JUMP_LABEL (insn)); + + if (after_regscan) + { + reg_scan_update (temp6, NEXT_INSN (next), old_max_reg); + old_max_reg = max_reg_num (); + } + } + } +#endif /* HAVE_cc0 */ + + /* Try to use a conditional move (if the target has them), or a + store-flag insn. The general case is: + + 1) x = a; if (...) x = b; and + 2) if (...) x = b; + + If the jump would be faster, the machine should not have defined + the movcc or scc insns!. These cases are often made by the + previous optimization. + + The second case is treated as x = x; if (...) x = b;. + + INSN here is the jump around the store. We set: + + TEMP to the "x = b;" insn. + TEMP1 to X. + TEMP2 to B. + TEMP3 to A (X in the second case). + TEMP4 to the condition being tested. + TEMP5 to the earliest insn used to find the condition. */ + + if (/* We can't do this after reload has completed. */ + ! reload_completed + && this_is_condjump && ! this_is_simplejump + /* Set TEMP to the "x = b;" insn. */ + && (temp = next_nonnote_insn (insn)) != 0 + && GET_CODE (temp) == INSN + && GET_CODE (PATTERN (temp)) == SET + && GET_CODE (temp1 = SET_DEST (PATTERN (temp))) == REG + && (! SMALL_REGISTER_CLASSES + || REGNO (temp1) >= FIRST_PSEUDO_REGISTER) + && ! side_effects_p (temp2 = SET_SRC (PATTERN (temp))) + && ! may_trap_p (temp2) + /* Allow either form, but prefer the former if both apply. + There is no point in using the old value of TEMP1 if + it is a register, since cse will alias them. It can + lose if the old value were a hard register since CSE + won't replace hard registers. Avoid using TEMP3 if + small register classes and it is a hard register. */ + && (((temp3 = reg_set_last (temp1, insn)) != 0 + && ! (SMALL_REGISTER_CLASSES && GET_CODE (temp3) == REG + && REGNO (temp3) < FIRST_PSEUDO_REGISTER)) + /* Make the latter case look like x = x; if (...) x = b; */ + || (temp3 = temp1, 1)) + /* INSN must either branch to the insn after TEMP or the insn + after TEMP must branch to the same place as INSN. */ + && (reallabelprev == temp + || ((temp4 = next_active_insn (temp)) != 0 + && simplejump_p (temp4) + && JUMP_LABEL (temp4) == JUMP_LABEL (insn))) + && (temp4 = get_condition (insn, &temp5)) != 0 + /* We must be comparing objects whose modes imply the size. + We could handle BLKmode if (1) emit_store_flag could + and (2) we could find the size reliably. */ + && GET_MODE (XEXP (temp4, 0)) != BLKmode + /* Even if branches are cheap, the store_flag optimization + can win when the operation to be performed can be + expressed directly. */ +#ifdef HAVE_cc0 + /* If the previous insn sets CC0 and something else, we can't + do this since we are going to delete that insn. */ + + && ! ((temp6 = prev_nonnote_insn (insn)) != 0 + && GET_CODE (temp6) == INSN + && (sets_cc0_p (PATTERN (temp6)) == -1 + || (sets_cc0_p (PATTERN (temp6)) == 1 + && FIND_REG_INC_NOTE (temp6, NULL_RTX)))) +#endif + ) + { +#ifdef HAVE_conditional_move + /* First try a conditional move. */ + { + enum rtx_code code = GET_CODE (temp4); + rtx var = temp1; + rtx cond0, cond1, aval, bval; + rtx target; + + /* Copy the compared variables into cond0 and cond1, so that + any side effects performed in or after the old comparison, + will not affect our compare which will come later. */ + /* ??? Is it possible to just use the comparison in the jump + insn? After all, we're going to delete it. We'd have + to modify emit_conditional_move to take a comparison rtx + instead or write a new function. */ + cond0 = gen_reg_rtx (GET_MODE (XEXP (temp4, 0))); + /* We want the target to be able to simplify comparisons with + zero (and maybe other constants as well), so don't create + pseudos for them. There's no need to either. */ + if (GET_CODE (XEXP (temp4, 1)) == CONST_INT + || GET_CODE (XEXP (temp4, 1)) == CONST_DOUBLE) + cond1 = XEXP (temp4, 1); + else + cond1 = gen_reg_rtx (GET_MODE (XEXP (temp4, 1))); + + aval = temp3; + bval = temp2; + + start_sequence (); + target = emit_conditional_move (var, code, + cond0, cond1, VOIDmode, + aval, bval, GET_MODE (var), + (code == LTU || code == GEU + || code == LEU || code == GTU)); + + if (target) + { + rtx seq1,seq2,last; + + /* Save the conditional move sequence but don't emit it + yet. On some machines, like the alpha, it is possible + that temp5 == insn, so next generate the sequence that + saves the compared values and then emit both + sequences ensuring seq1 occurs before seq2. */ + seq2 = get_insns (); + end_sequence (); + + /* Now that we can't fail, generate the copy insns that + preserve the compared values. */ + start_sequence (); + emit_move_insn (cond0, XEXP (temp4, 0)); + if (cond1 != XEXP (temp4, 1)) + emit_move_insn (cond1, XEXP (temp4, 1)); + seq1 = get_insns (); + end_sequence (); + + emit_insns_before (seq1, temp5); + /* Insert conditional move after insn, to be sure that + the jump and a possible compare won't be separated */ + last = emit_insns_after (seq2, insn); + + /* ??? We can also delete the insn that sets X to A. + Flow will do it too though. */ + delete_insn (temp); + next = NEXT_INSN (insn); + delete_jump (insn); + + if (after_regscan) + { + reg_scan_update (seq1, NEXT_INSN (last), old_max_reg); + old_max_reg = max_reg_num (); + } + + changed = 1; + continue; + } + else + end_sequence (); + } +#endif + + /* That didn't work, try a store-flag insn. + + We further divide the cases into: + + 1) x = a; if (...) x = b; and either A or B is zero, + 2) if (...) x = 0; and jumps are expensive, + 3) x = a; if (...) x = b; and A and B are constants where all + the set bits in A are also set in B and jumps are expensive, + 4) x = a; if (...) x = b; and A and B non-zero, and jumps are + more expensive, and + 5) if (...) x = b; if jumps are even more expensive. */ + + if (GET_MODE_CLASS (GET_MODE (temp1)) == MODE_INT + && ((GET_CODE (temp3) == CONST_INT) + /* Make the latter case look like + x = x; if (...) x = 0; */ + || (temp3 = temp1, + ((BRANCH_COST >= 2 + && temp2 == const0_rtx) + || BRANCH_COST >= 3))) + /* If B is zero, OK; if A is zero, can only do (1) if we + can reverse the condition. See if (3) applies possibly + by reversing the condition. Prefer reversing to (4) when + branches are very expensive. */ + && (((BRANCH_COST >= 2 + || STORE_FLAG_VALUE == -1 + || (STORE_FLAG_VALUE == 1 + /* Check that the mask is a power of two, + so that it can probably be generated + with a shift. */ + && GET_CODE (temp3) == CONST_INT + && exact_log2 (INTVAL (temp3)) >= 0)) + && (reversep = 0, temp2 == const0_rtx)) + || ((BRANCH_COST >= 2 + || STORE_FLAG_VALUE == -1 + || (STORE_FLAG_VALUE == 1 + && GET_CODE (temp2) == CONST_INT + && exact_log2 (INTVAL (temp2)) >= 0)) + && temp3 == const0_rtx + && (reversep = can_reverse_comparison_p (temp4, insn))) + || (BRANCH_COST >= 2 + && GET_CODE (temp2) == CONST_INT + && GET_CODE (temp3) == CONST_INT + && ((INTVAL (temp2) & INTVAL (temp3)) == INTVAL (temp2) + || ((INTVAL (temp2) & INTVAL (temp3)) == INTVAL (temp3) + && (reversep = can_reverse_comparison_p (temp4, + insn))))) + || BRANCH_COST >= 3) + ) + { + enum rtx_code code = GET_CODE (temp4); + rtx uval, cval, var = temp1; + int normalizep; + rtx target; + + /* If necessary, reverse the condition. */ + if (reversep) + code = reverse_condition (code), uval = temp2, cval = temp3; + else + uval = temp3, cval = temp2; + + /* If CVAL is non-zero, normalize to -1. Otherwise, if UVAL + is the constant 1, it is best to just compute the result + directly. If UVAL is constant and STORE_FLAG_VALUE + includes all of its bits, it is best to compute the flag + value unnormalized and `and' it with UVAL. Otherwise, + normalize to -1 and `and' with UVAL. */ + normalizep = (cval != const0_rtx ? -1 + : (uval == const1_rtx ? 1 + : (GET_CODE (uval) == CONST_INT + && (INTVAL (uval) & ~STORE_FLAG_VALUE) == 0) + ? 0 : -1)); + + /* We will be putting the store-flag insn immediately in + front of the comparison that was originally being done, + so we know all the variables in TEMP4 will be valid. + However, this might be in front of the assignment of + A to VAR. If it is, it would clobber the store-flag + we will be emitting. + + Therefore, emit into a temporary which will be copied to + VAR immediately after TEMP. */ + + start_sequence (); + target = emit_store_flag (gen_reg_rtx (GET_MODE (var)), code, + XEXP (temp4, 0), XEXP (temp4, 1), + VOIDmode, + (code == LTU || code == LEU + || code == GEU || code == GTU), + normalizep); + if (target) + { + rtx seq; + rtx before = insn; + + seq = get_insns (); + end_sequence (); + + /* Put the store-flag insns in front of the first insn + used to compute the condition to ensure that we + use the same values of them as the current + comparison. However, the remainder of the insns we + generate will be placed directly in front of the + jump insn, in case any of the pseudos we use + are modified earlier. */ + + emit_insns_before (seq, temp5); + + start_sequence (); + + /* Both CVAL and UVAL are non-zero. */ + if (cval != const0_rtx && uval != const0_rtx) + { + rtx tem1, tem2; + + tem1 = expand_and (uval, target, NULL_RTX); + if (GET_CODE (cval) == CONST_INT + && GET_CODE (uval) == CONST_INT + && (INTVAL (cval) & INTVAL (uval)) == INTVAL (cval)) + tem2 = cval; + else + { + tem2 = expand_unop (GET_MODE (var), one_cmpl_optab, + target, NULL_RTX, 0); + tem2 = expand_and (cval, tem2, + (GET_CODE (tem2) == REG + ? tem2 : 0)); + } + + /* If we usually make new pseudos, do so here. This + turns out to help machines that have conditional + move insns. */ + /* ??? Conditional moves have already been handled. + This may be obsolete. */ + + if (flag_expensive_optimizations) + target = 0; + + target = expand_binop (GET_MODE (var), ior_optab, + tem1, tem2, target, + 1, OPTAB_WIDEN); + } + else if (normalizep != 1) + { + /* We know that either CVAL or UVAL is zero. If + UVAL is zero, negate TARGET and `and' with CVAL. + Otherwise, `and' with UVAL. */ + if (uval == const0_rtx) + { + target = expand_unop (GET_MODE (var), one_cmpl_optab, + target, NULL_RTX, 0); + uval = cval; + } + + target = expand_and (uval, target, + (GET_CODE (target) == REG + && ! preserve_subexpressions_p () + ? target : NULL_RTX)); + } + + emit_move_insn (var, target); + seq = get_insns (); + end_sequence (); +#ifdef HAVE_cc0 + /* If INSN uses CC0, we must not separate it from the + insn that sets cc0. */ + if (reg_mentioned_p (cc0_rtx, PATTERN (before))) + before = prev_nonnote_insn (before); +#endif + emit_insns_before (seq, before); + + delete_insn (temp); + next = NEXT_INSN (insn); + delete_jump (insn); + + if (after_regscan) + { + reg_scan_update (seq, NEXT_INSN (next), old_max_reg); + old_max_reg = max_reg_num (); + } + + changed = 1; + continue; + } + else + end_sequence (); + } + } + + /* If branches are expensive, convert + if (foo) bar++; to bar += (foo != 0); + and similarly for "bar--;" + + INSN is the conditional branch around the arithmetic. We set: + + TEMP is the arithmetic insn. + TEMP1 is the SET doing the arithmetic. + TEMP2 is the operand being incremented or decremented. + TEMP3 to the condition being tested. + TEMP4 to the earliest insn used to find the condition. */ + + if ((BRANCH_COST >= 2 +#ifdef HAVE_incscc + || HAVE_incscc +#endif +#ifdef HAVE_decscc + || HAVE_decscc +#endif + ) + && ! reload_completed + && this_is_condjump && ! this_is_simplejump + && (temp = next_nonnote_insn (insn)) != 0 + && (temp1 = single_set (temp)) != 0 + && (temp2 = SET_DEST (temp1), + GET_MODE_CLASS (GET_MODE (temp2)) == MODE_INT) + && GET_CODE (SET_SRC (temp1)) == PLUS + && (XEXP (SET_SRC (temp1), 1) == const1_rtx + || XEXP (SET_SRC (temp1), 1) == constm1_rtx) + && rtx_equal_p (temp2, XEXP (SET_SRC (temp1), 0)) + && ! side_effects_p (temp2) + && ! may_trap_p (temp2) + /* INSN must either branch to the insn after TEMP or the insn + after TEMP must branch to the same place as INSN. */ + && (reallabelprev == temp + || ((temp3 = next_active_insn (temp)) != 0 + && simplejump_p (temp3) + && JUMP_LABEL (temp3) == JUMP_LABEL (insn))) + && (temp3 = get_condition (insn, &temp4)) != 0 + /* We must be comparing objects whose modes imply the size. + We could handle BLKmode if (1) emit_store_flag could + and (2) we could find the size reliably. */ + && GET_MODE (XEXP (temp3, 0)) != BLKmode + && can_reverse_comparison_p (temp3, insn)) + { + rtx temp6, target = 0, seq, init_insn = 0, init = temp2; + enum rtx_code code = reverse_condition (GET_CODE (temp3)); + + start_sequence (); + + /* It must be the case that TEMP2 is not modified in the range + [TEMP4, INSN). The one exception we make is if the insn + before INSN sets TEMP2 to something which is also unchanged + in that range. In that case, we can move the initialization + into our sequence. */ + + if ((temp5 = prev_active_insn (insn)) != 0 + && no_labels_between_p (temp5, insn) + && GET_CODE (temp5) == INSN + && (temp6 = single_set (temp5)) != 0 + && rtx_equal_p (temp2, SET_DEST (temp6)) + && (CONSTANT_P (SET_SRC (temp6)) + || GET_CODE (SET_SRC (temp6)) == REG + || GET_CODE (SET_SRC (temp6)) == SUBREG)) + { + emit_insn (PATTERN (temp5)); + init_insn = temp5; + init = SET_SRC (temp6); + } + + if (CONSTANT_P (init) + || ! reg_set_between_p (init, PREV_INSN (temp4), insn)) + target = emit_store_flag (gen_reg_rtx (GET_MODE (temp2)), code, + XEXP (temp3, 0), XEXP (temp3, 1), + VOIDmode, + (code == LTU || code == LEU + || code == GTU || code == GEU), 1); + + /* If we can do the store-flag, do the addition or + subtraction. */ + + if (target) + target = expand_binop (GET_MODE (temp2), + (XEXP (SET_SRC (temp1), 1) == const1_rtx + ? add_optab : sub_optab), + temp2, target, temp2, 0, OPTAB_WIDEN); + + if (target != 0) + { + /* Put the result back in temp2 in case it isn't already. + Then replace the jump, possible a CC0-setting insn in + front of the jump, and TEMP, with the sequence we have + made. */ + + if (target != temp2) + emit_move_insn (temp2, target); + + seq = get_insns (); + end_sequence (); + + emit_insns_before (seq, temp4); + delete_insn (temp); + + if (init_insn) + delete_insn (init_insn); + + next = NEXT_INSN (insn); +#ifdef HAVE_cc0 + delete_insn (prev_nonnote_insn (insn)); +#endif + delete_insn (insn); + + if (after_regscan) + { + reg_scan_update (seq, NEXT_INSN (next), old_max_reg); + old_max_reg = max_reg_num (); + } + + changed = 1; + continue; + } + else + end_sequence (); + } + + /* Simplify if (...) x = 1; else {...} if (x) ... + We recognize this case scanning backwards as well. + + TEMP is the assignment to x; + TEMP1 is the label at the head of the second if. */ + /* ?? This should call get_condition to find the values being + compared, instead of looking for a COMPARE insn when HAVE_cc0 + is not defined. This would allow it to work on the m88k. */ + /* ?? This optimization is only safe before cse is run if HAVE_cc0 + is not defined and the condition is tested by a separate compare + insn. This is because the code below assumes that the result + of the compare dies in the following branch. + + Not only that, but there might be other insns between the + compare and branch whose results are live. Those insns need + to be executed. + + A way to fix this is to move the insns at JUMP_LABEL (insn) + to before INSN. If we are running before flow, they will + be deleted if they aren't needed. But this doesn't work + well after flow. + + This is really a special-case of jump threading, anyway. The + right thing to do is to replace this and jump threading with + much simpler code in cse. + + This code has been turned off in the non-cc0 case in the + meantime. */ + +#ifdef HAVE_cc0 + else if (this_is_simplejump + /* Safe to skip USE and CLOBBER insns here + since they will not be deleted. */ + && (temp = prev_active_insn (insn)) + && no_labels_between_p (temp, insn) + && GET_CODE (temp) == INSN + && GET_CODE (PATTERN (temp)) == SET + && GET_CODE (SET_DEST (PATTERN (temp))) == REG + && CONSTANT_P (SET_SRC (PATTERN (temp))) + && (temp1 = next_active_insn (JUMP_LABEL (insn))) + /* If we find that the next value tested is `x' + (TEMP1 is the insn where this happens), win. */ + && GET_CODE (temp1) == INSN + && GET_CODE (PATTERN (temp1)) == SET +#ifdef HAVE_cc0 + /* Does temp1 `tst' the value of x? */ + && SET_SRC (PATTERN (temp1)) == SET_DEST (PATTERN (temp)) + && SET_DEST (PATTERN (temp1)) == cc0_rtx + && (temp1 = next_nonnote_insn (temp1)) +#else + /* Does temp1 compare the value of x against zero? */ + && GET_CODE (SET_SRC (PATTERN (temp1))) == COMPARE + && XEXP (SET_SRC (PATTERN (temp1)), 1) == const0_rtx + && (XEXP (SET_SRC (PATTERN (temp1)), 0) + == SET_DEST (PATTERN (temp))) + && GET_CODE (SET_DEST (PATTERN (temp1))) == REG + && (temp1 = find_next_ref (SET_DEST (PATTERN (temp1)), temp1)) +#endif + && condjump_p (temp1)) + { + /* Get the if_then_else from the condjump. */ + rtx choice = SET_SRC (PATTERN (temp1)); + if (GET_CODE (choice) == IF_THEN_ELSE) + { + enum rtx_code code = GET_CODE (XEXP (choice, 0)); + rtx val = SET_SRC (PATTERN (temp)); + rtx cond + = simplify_relational_operation (code, GET_MODE (SET_DEST (PATTERN (temp))), + val, const0_rtx); + rtx ultimate; + + if (cond == const_true_rtx) + ultimate = XEXP (choice, 1); + else if (cond == const0_rtx) + ultimate = XEXP (choice, 2); + else + ultimate = 0; + + if (ultimate == pc_rtx) + ultimate = get_label_after (temp1); + else if (ultimate && GET_CODE (ultimate) != RETURN) + ultimate = XEXP (ultimate, 0); + + if (ultimate && JUMP_LABEL(insn) != ultimate) + changed |= redirect_jump (insn, ultimate); + } + } +#endif + +#if 0 + /* @@ This needs a bit of work before it will be right. + + Any type of comparison can be accepted for the first and + second compare. When rewriting the first jump, we must + compute the what conditions can reach label3, and use the + appropriate code. We can not simply reverse/swap the code + of the first jump. In some cases, the second jump must be + rewritten also. + + For example, + < == converts to > == + < != converts to == > + etc. + + If the code is written to only accept an '==' test for the second + compare, then all that needs to be done is to swap the condition + of the first branch. + + It is questionable whether we want this optimization anyways, + since if the user wrote code like this because he/she knew that + the jump to label1 is taken most of the time, then rewriting + this gives slower code. */ + /* @@ This should call get_condition to find the values being + compared, instead of looking for a COMPARE insn when HAVE_cc0 + is not defined. This would allow it to work on the m88k. */ + /* @@ This optimization is only safe before cse is run if HAVE_cc0 + is not defined and the condition is tested by a separate compare + insn. This is because the code below assumes that the result + of the compare dies in the following branch. */ + + /* Simplify test a ~= b + condjump label1; + test a == b + condjump label2; + jump label3; + label1: + + rewriting as + test a ~~= b + condjump label3 + test a == b + condjump label2 + label1: + + where ~= is an inequality, e.g. >, and ~~= is the swapped + inequality, e.g. <. + + We recognize this case scanning backwards. + + TEMP is the conditional jump to `label2'; + TEMP1 is the test for `a == b'; + TEMP2 is the conditional jump to `label1'; + TEMP3 is the test for `a ~= b'. */ + else if (this_is_simplejump + && (temp = prev_active_insn (insn)) + && no_labels_between_p (temp, insn) + && condjump_p (temp) + && (temp1 = prev_active_insn (temp)) + && no_labels_between_p (temp1, temp) + && GET_CODE (temp1) == INSN + && GET_CODE (PATTERN (temp1)) == SET +#ifdef HAVE_cc0 + && sets_cc0_p (PATTERN (temp1)) == 1 +#else + && GET_CODE (SET_SRC (PATTERN (temp1))) == COMPARE + && GET_CODE (SET_DEST (PATTERN (temp1))) == REG + && (temp == find_next_ref (SET_DEST (PATTERN (temp1)), temp1)) +#endif + && (temp2 = prev_active_insn (temp1)) + && no_labels_between_p (temp2, temp1) + && condjump_p (temp2) + && JUMP_LABEL (temp2) == next_nonnote_insn (NEXT_INSN (insn)) + && (temp3 = prev_active_insn (temp2)) + && no_labels_between_p (temp3, temp2) + && GET_CODE (PATTERN (temp3)) == SET + && rtx_equal_p (SET_DEST (PATTERN (temp3)), + SET_DEST (PATTERN (temp1))) + && rtx_equal_p (SET_SRC (PATTERN (temp1)), + SET_SRC (PATTERN (temp3))) + && ! inequality_comparisons_p (PATTERN (temp)) + && inequality_comparisons_p (PATTERN (temp2))) + { + rtx fallthrough_label = JUMP_LABEL (temp2); + + ++LABEL_NUSES (fallthrough_label); + if (swap_jump (temp2, JUMP_LABEL (insn))) + { + delete_insn (insn); + changed = 1; + } + + if (--LABEL_NUSES (fallthrough_label) == 0) + delete_insn (fallthrough_label); + } +#endif + /* Simplify if (...) {... x = 1;} if (x) ... + + We recognize this case backwards. + + TEMP is the test of `x'; + TEMP1 is the assignment to `x' at the end of the + previous statement. */ + /* @@ This should call get_condition to find the values being + compared, instead of looking for a COMPARE insn when HAVE_cc0 + is not defined. This would allow it to work on the m88k. */ + /* @@ This optimization is only safe before cse is run if HAVE_cc0 + is not defined and the condition is tested by a separate compare + insn. This is because the code below assumes that the result + of the compare dies in the following branch. */ + + /* ??? This has to be turned off. The problem is that the + unconditional jump might indirectly end up branching to the + label between TEMP1 and TEMP. We can't detect this, in general, + since it may become a jump to there after further optimizations. + If that jump is done, it will be deleted, so we will retry + this optimization in the next pass, thus an infinite loop. + + The present code prevents this by putting the jump after the + label, but this is not logically correct. */ +#if 0 + else if (this_is_condjump + /* Safe to skip USE and CLOBBER insns here + since they will not be deleted. */ + && (temp = prev_active_insn (insn)) + && no_labels_between_p (temp, insn) + && GET_CODE (temp) == INSN + && GET_CODE (PATTERN (temp)) == SET +#ifdef HAVE_cc0 + && sets_cc0_p (PATTERN (temp)) == 1 + && GET_CODE (SET_SRC (PATTERN (temp))) == REG +#else + /* Temp must be a compare insn, we can not accept a register + to register move here, since it may not be simply a + tst insn. */ + && GET_CODE (SET_SRC (PATTERN (temp))) == COMPARE + && XEXP (SET_SRC (PATTERN (temp)), 1) == const0_rtx + && GET_CODE (XEXP (SET_SRC (PATTERN (temp)), 0)) == REG + && GET_CODE (SET_DEST (PATTERN (temp))) == REG + && insn == find_next_ref (SET_DEST (PATTERN (temp)), temp) +#endif + /* May skip USE or CLOBBER insns here + for checking for opportunity, since we + take care of them later. */ + && (temp1 = prev_active_insn (temp)) + && GET_CODE (temp1) == INSN + && GET_CODE (PATTERN (temp1)) == SET +#ifdef HAVE_cc0 + && SET_SRC (PATTERN (temp)) == SET_DEST (PATTERN (temp1)) +#else + && (XEXP (SET_SRC (PATTERN (temp)), 0) + == SET_DEST (PATTERN (temp1))) +#endif + && CONSTANT_P (SET_SRC (PATTERN (temp1))) + /* If this isn't true, cse will do the job. */ + && ! no_labels_between_p (temp1, temp)) + { + /* Get the if_then_else from the condjump. */ + rtx choice = SET_SRC (PATTERN (insn)); + if (GET_CODE (choice) == IF_THEN_ELSE + && (GET_CODE (XEXP (choice, 0)) == EQ + || GET_CODE (XEXP (choice, 0)) == NE)) + { + int want_nonzero = (GET_CODE (XEXP (choice, 0)) == NE); + rtx last_insn; + rtx ultimate; + rtx p; + + /* Get the place that condjump will jump to + if it is reached from here. */ + if ((SET_SRC (PATTERN (temp1)) != const0_rtx) + == want_nonzero) + ultimate = XEXP (choice, 1); + else + ultimate = XEXP (choice, 2); + /* Get it as a CODE_LABEL. */ + if (ultimate == pc_rtx) + ultimate = get_label_after (insn); + else + /* Get the label out of the LABEL_REF. */ + ultimate = XEXP (ultimate, 0); + + /* Insert the jump immediately before TEMP, specifically + after the label that is between TEMP1 and TEMP. */ + last_insn = PREV_INSN (temp); + + /* If we would be branching to the next insn, the jump + would immediately be deleted and the re-inserted in + a subsequent pass over the code. So don't do anything + in that case. */ + if (next_active_insn (last_insn) + != next_active_insn (ultimate)) + { + emit_barrier_after (last_insn); + p = emit_jump_insn_after (gen_jump (ultimate), + last_insn); + JUMP_LABEL (p) = ultimate; + ++LABEL_NUSES (ultimate); + if (INSN_UID (ultimate) < max_jump_chain + && INSN_CODE (p) < max_jump_chain) + { + jump_chain[INSN_UID (p)] + = jump_chain[INSN_UID (ultimate)]; + jump_chain[INSN_UID (ultimate)] = p; + } + changed = 1; + continue; + } + } + } +#endif + /* Detect a conditional jump going to the same place + as an immediately following unconditional jump. */ + else if (this_is_condjump + && (temp = next_active_insn (insn)) != 0 + && simplejump_p (temp) + && (next_active_insn (JUMP_LABEL (insn)) + == next_active_insn (JUMP_LABEL (temp)))) + { + rtx tem = temp; + + /* ??? Optional. Disables some optimizations, but makes + gcov output more accurate with -O. */ + if (flag_test_coverage && !reload_completed) + for (tem = insn; tem != temp; tem = NEXT_INSN (tem)) + if (GET_CODE (tem) == NOTE && NOTE_LINE_NUMBER (tem) > 0) + break; + + if (tem == temp) + { + delete_jump (insn); + changed = 1; + continue; + } + } +#ifdef HAVE_trap + /* Detect a conditional jump jumping over an unconditional trap. */ + else if (HAVE_trap + && this_is_condjump && ! this_is_simplejump + && reallabelprev != 0 + && GET_CODE (reallabelprev) == INSN + && GET_CODE (PATTERN (reallabelprev)) == TRAP_IF + && TRAP_CONDITION (PATTERN (reallabelprev)) == const_true_rtx + && prev_active_insn (reallabelprev) == insn + && no_labels_between_p (insn, reallabelprev) + && (temp2 = get_condition (insn, &temp4)) + && can_reverse_comparison_p (temp2, insn)) + { + rtx new = gen_cond_trap (reverse_condition (GET_CODE (temp2)), + XEXP (temp2, 0), XEXP (temp2, 1), + TRAP_CODE (PATTERN (reallabelprev))); + + if (new) + { + emit_insn_before (new, temp4); + delete_insn (reallabelprev); + delete_jump (insn); + changed = 1; + continue; + } + } + /* Detect a jump jumping to an unconditional trap. */ + else if (HAVE_trap && this_is_condjump + && (temp = next_active_insn (JUMP_LABEL (insn))) + && GET_CODE (temp) == INSN + && GET_CODE (PATTERN (temp)) == TRAP_IF + && (this_is_simplejump + || (temp2 = get_condition (insn, &temp4)))) + { + rtx tc = TRAP_CONDITION (PATTERN (temp)); + + if (tc == const_true_rtx + || (! this_is_simplejump && rtx_equal_p (temp2, tc))) + { + rtx new; + /* Replace an unconditional jump to a trap with a trap. */ + if (this_is_simplejump) + { + emit_barrier_after (emit_insn_before (gen_trap (), insn)); + delete_jump (insn); + changed = 1; + continue; + } + new = gen_cond_trap (GET_CODE (temp2), XEXP (temp2, 0), + XEXP (temp2, 1), + TRAP_CODE (PATTERN (temp))); + if (new) + { + emit_insn_before (new, temp4); + delete_jump (insn); + changed = 1; + continue; + } + } + /* If the trap condition and jump condition are mutually + exclusive, redirect the jump to the following insn. */ + else if (GET_RTX_CLASS (GET_CODE (tc)) == '<' + && ! this_is_simplejump + && swap_condition (GET_CODE (temp2)) == GET_CODE (tc) + && rtx_equal_p (XEXP (tc, 0), XEXP (temp2, 0)) + && rtx_equal_p (XEXP (tc, 1), XEXP (temp2, 1)) + && redirect_jump (insn, get_label_after (temp))) + { + changed = 1; + continue; + } + } +#endif + + /* Detect a conditional jump jumping over an unconditional jump. */ + + else if ((this_is_condjump || this_is_condjump_in_parallel) + && ! this_is_simplejump + && reallabelprev != 0 + && GET_CODE (reallabelprev) == JUMP_INSN + && prev_active_insn (reallabelprev) == insn + && no_labels_between_p (insn, reallabelprev) + && simplejump_p (reallabelprev)) + { + /* When we invert the unconditional jump, we will be + decrementing the usage count of its old label. + Make sure that we don't delete it now because that + might cause the following code to be deleted. */ + rtx prev_uses = prev_nonnote_insn (reallabelprev); + rtx prev_label = JUMP_LABEL (insn); + + if (prev_label) + ++LABEL_NUSES (prev_label); + + if (invert_jump (insn, JUMP_LABEL (reallabelprev))) + { + /* It is very likely that if there are USE insns before + this jump, they hold REG_DEAD notes. These REG_DEAD + notes are no longer valid due to this optimization, + and will cause the life-analysis that following passes + (notably delayed-branch scheduling) to think that + these registers are dead when they are not. + + To prevent this trouble, we just remove the USE insns + from the insn chain. */ + + while (prev_uses && GET_CODE (prev_uses) == INSN + && GET_CODE (PATTERN (prev_uses)) == USE) + { + rtx useless = prev_uses; + prev_uses = prev_nonnote_insn (prev_uses); + delete_insn (useless); + } + + delete_insn (reallabelprev); + next = insn; + changed = 1; + } + + /* We can now safely delete the label if it is unreferenced + since the delete_insn above has deleted the BARRIER. */ + if (prev_label && --LABEL_NUSES (prev_label) == 0) + delete_insn (prev_label); + continue; + } + else + { + /* Detect a jump to a jump. */ + + nlabel = follow_jumps (JUMP_LABEL (insn)); + if (nlabel != JUMP_LABEL (insn) + && redirect_jump (insn, nlabel)) + { + changed = 1; + next = insn; + } + + /* Look for if (foo) bar; else break; */ + /* The insns look like this: + insn = condjump label1; + ...range1 (some insns)... + jump label2; + label1: + ...range2 (some insns)... + jump somewhere unconditionally + label2: */ + { + rtx label1 = next_label (insn); + rtx range1end = label1 ? prev_active_insn (label1) : 0; + /* Don't do this optimization on the first round, so that + jump-around-a-jump gets simplified before we ask here + whether a jump is unconditional. + + Also don't do it when we are called after reload since + it will confuse reorg. */ + if (! first + && (reload_completed ? ! flag_delayed_branch : 1) + /* Make sure INSN is something we can invert. */ + && condjump_p (insn) + && label1 != 0 + && JUMP_LABEL (insn) == label1 + && LABEL_NUSES (label1) == 1 + && GET_CODE (range1end) == JUMP_INSN + && simplejump_p (range1end)) + { + rtx label2 = next_label (label1); + rtx range2end = label2 ? prev_active_insn (label2) : 0; + if (range1end != range2end + && JUMP_LABEL (range1end) == label2 + && GET_CODE (range2end) == JUMP_INSN + && GET_CODE (NEXT_INSN (range2end)) == BARRIER + /* Invert the jump condition, so we + still execute the same insns in each case. */ + && invert_jump (insn, label1)) + { + rtx range1beg = next_active_insn (insn); + rtx range2beg = next_active_insn (label1); + rtx range1after, range2after; + rtx range1before, range2before; + rtx rangenext; + + /* Include in each range any notes before it, to be + sure that we get the line number note if any, even + if there are other notes here. */ + while (PREV_INSN (range1beg) + && GET_CODE (PREV_INSN (range1beg)) == NOTE) + range1beg = PREV_INSN (range1beg); + + while (PREV_INSN (range2beg) + && GET_CODE (PREV_INSN (range2beg)) == NOTE) + range2beg = PREV_INSN (range2beg); + + /* Don't move NOTEs for blocks or loops; shift them + outside the ranges, where they'll stay put. */ + range1beg = squeeze_notes (range1beg, range1end); + range2beg = squeeze_notes (range2beg, range2end); + + /* Get current surrounds of the 2 ranges. */ + range1before = PREV_INSN (range1beg); + range2before = PREV_INSN (range2beg); + range1after = NEXT_INSN (range1end); + range2after = NEXT_INSN (range2end); + + /* Splice range2 where range1 was. */ + NEXT_INSN (range1before) = range2beg; + PREV_INSN (range2beg) = range1before; + NEXT_INSN (range2end) = range1after; + PREV_INSN (range1after) = range2end; + /* Splice range1 where range2 was. */ + NEXT_INSN (range2before) = range1beg; + PREV_INSN (range1beg) = range2before; + NEXT_INSN (range1end) = range2after; + PREV_INSN (range2after) = range1end; + + /* Check for a loop end note between the end of + range2, and the next code label. If there is one, + then what we have really seen is + if (foo) break; end_of_loop; + and moved the break sequence outside the loop. + We must move the LOOP_END note to where the + loop really ends now, or we will confuse loop + optimization. Stop if we find a LOOP_BEG note + first, since we don't want to move the LOOP_END + note in that case. */ + for (;range2after != label2; range2after = rangenext) + { + rangenext = NEXT_INSN (range2after); + if (GET_CODE (range2after) == NOTE) + { + if (NOTE_LINE_NUMBER (range2after) + == NOTE_INSN_LOOP_END) + { + NEXT_INSN (PREV_INSN (range2after)) + = rangenext; + PREV_INSN (rangenext) + = PREV_INSN (range2after); + PREV_INSN (range2after) + = PREV_INSN (range1beg); + NEXT_INSN (range2after) = range1beg; + NEXT_INSN (PREV_INSN (range1beg)) + = range2after; + PREV_INSN (range1beg) = range2after; + } + else if (NOTE_LINE_NUMBER (range2after) + == NOTE_INSN_LOOP_BEG) + break; + } + } + changed = 1; + continue; + } + } + } + + /* Now that the jump has been tensioned, + try cross jumping: check for identical code + before the jump and before its target label. */ + + /* First, cross jumping of conditional jumps: */ + + if (cross_jump && condjump_p (insn)) + { + rtx newjpos, newlpos; + rtx x = prev_real_insn (JUMP_LABEL (insn)); + + /* A conditional jump may be crossjumped + only if the place it jumps to follows + an opposing jump that comes back here. */ + + if (x != 0 && ! jump_back_p (x, insn)) + /* We have no opposing jump; + cannot cross jump this insn. */ + x = 0; + + newjpos = 0; + /* TARGET is nonzero if it is ok to cross jump + to code before TARGET. If so, see if matches. */ + if (x != 0) + find_cross_jump (insn, x, 2, + &newjpos, &newlpos); + + if (newjpos != 0) + { + do_cross_jump (insn, newjpos, newlpos); + /* Make the old conditional jump + into an unconditional one. */ + SET_SRC (PATTERN (insn)) + = gen_rtx_LABEL_REF (VOIDmode, JUMP_LABEL (insn)); + INSN_CODE (insn) = -1; + emit_barrier_after (insn); + /* Add to jump_chain unless this is a new label + whose UID is too large. */ + if (INSN_UID (JUMP_LABEL (insn)) < max_jump_chain) + { + jump_chain[INSN_UID (insn)] + = jump_chain[INSN_UID (JUMP_LABEL (insn))]; + jump_chain[INSN_UID (JUMP_LABEL (insn))] = insn; + } + changed = 1; + next = insn; + } + } + + /* Cross jumping of unconditional jumps: + a few differences. */ + + if (cross_jump && simplejump_p (insn)) + { + rtx newjpos, newlpos; + rtx target; + + newjpos = 0; + + /* TARGET is nonzero if it is ok to cross jump + to code before TARGET. If so, see if matches. */ + find_cross_jump (insn, JUMP_LABEL (insn), 1, + &newjpos, &newlpos); + + /* If cannot cross jump to code before the label, + see if we can cross jump to another jump to + the same label. */ + /* Try each other jump to this label. */ + if (INSN_UID (JUMP_LABEL (insn)) < max_uid) + for (target = jump_chain[INSN_UID (JUMP_LABEL (insn))]; + target != 0 && newjpos == 0; + target = jump_chain[INSN_UID (target)]) + if (target != insn + && JUMP_LABEL (target) == JUMP_LABEL (insn) + /* Ignore TARGET if it's deleted. */ + && ! INSN_DELETED_P (target)) + find_cross_jump (insn, target, 2, + &newjpos, &newlpos); + + if (newjpos != 0) + { + do_cross_jump (insn, newjpos, newlpos); + changed = 1; + next = insn; + } + } + + /* This code was dead in the previous jump.c! */ + if (cross_jump && GET_CODE (PATTERN (insn)) == RETURN) + { + /* Return insns all "jump to the same place" + so we can cross-jump between any two of them. */ + + rtx newjpos, newlpos, target; + + newjpos = 0; + + /* If cannot cross jump to code before the label, + see if we can cross jump to another jump to + the same label. */ + /* Try each other jump to this label. */ + for (target = jump_chain[0]; + target != 0 && newjpos == 0; + target = jump_chain[INSN_UID (target)]) + if (target != insn + && ! INSN_DELETED_P (target) + && GET_CODE (PATTERN (target)) == RETURN) + find_cross_jump (insn, target, 2, + &newjpos, &newlpos); + + if (newjpos != 0) + { + do_cross_jump (insn, newjpos, newlpos); + changed = 1; + next = insn; + } + } + } + } + + first = 0; + } + + /* Delete extraneous line number notes. + Note that two consecutive notes for different lines are not really + extraneous. There should be some indication where that line belonged, + even if it became empty. */ + + { + rtx last_note = 0; + + for (insn = f; insn; insn = NEXT_INSN (insn)) + if (GET_CODE (insn) == NOTE && NOTE_LINE_NUMBER (insn) >= 0) + { + /* Delete this note if it is identical to previous note. */ + if (last_note + && NOTE_SOURCE_FILE (insn) == NOTE_SOURCE_FILE (last_note) + && NOTE_LINE_NUMBER (insn) == NOTE_LINE_NUMBER (last_note)) + { + delete_insn (insn); + continue; + } + + last_note = insn; + } + } + +#ifdef HAVE_return + if (HAVE_return) + { + /* If we fall through to the epilogue, see if we can insert a RETURN insn + in front of it. If the machine allows it at this point (we might be + after reload for a leaf routine), it will improve optimization for it + to be there. We do this both here and at the start of this pass since + the RETURN might have been deleted by some of our optimizations. */ + insn = get_last_insn (); + while (insn && GET_CODE (insn) == NOTE) + insn = PREV_INSN (insn); + + if (insn && GET_CODE (insn) != BARRIER) + { + emit_jump_insn (gen_return ()); + emit_barrier (); + } + } +#endif + + can_reach_end = calculate_can_reach_end (last_insn, 0, 1); + + /* Show JUMP_CHAIN no longer valid. */ + jump_chain = 0; +} + +/* Initialize LABEL_NUSES and JUMP_LABEL fields. Delete any REG_LABEL + notes whose labels don't occur in the insn any more. Returns the + largest INSN_UID found. */ +static int +init_label_info (f) + rtx f; +{ + int largest_uid = 0; + rtx insn; + + for (insn = f; insn; insn = NEXT_INSN (insn)) + { + if (GET_CODE (insn) == CODE_LABEL) + LABEL_NUSES (insn) = (LABEL_PRESERVE_P (insn) != 0); + else if (GET_CODE (insn) == JUMP_INSN) + JUMP_LABEL (insn) = 0; + else if (GET_CODE (insn) == INSN || GET_CODE (insn) == CALL_INSN) + { + rtx note, next; + + for (note = REG_NOTES (insn); note; note = next) + { + next = XEXP (note, 1); + if (REG_NOTE_KIND (note) == REG_LABEL + && ! reg_mentioned_p (XEXP (note, 0), PATTERN (insn))) + remove_note (insn, note); + } + } + if (INSN_UID (insn) > largest_uid) + largest_uid = INSN_UID (insn); + } + + return largest_uid; +} + +/* Delete insns following barriers, up to next label. + + Also delete no-op jumps created by gcse. */ +static void +delete_barrier_successors (f) + rtx f; +{ + rtx insn; + + for (insn = f; insn;) + { + if (GET_CODE (insn) == BARRIER) + { + insn = NEXT_INSN (insn); + while (insn != 0 && GET_CODE (insn) != CODE_LABEL) + { + if (GET_CODE (insn) == NOTE + && NOTE_LINE_NUMBER (insn) != NOTE_INSN_FUNCTION_END) + insn = NEXT_INSN (insn); + else + insn = delete_insn (insn); + } + /* INSN is now the code_label. */ + } + /* Also remove (set (pc) (pc)) insns which can be created by + gcse. We eliminate such insns now to avoid having them + cause problems later. */ + else if (GET_CODE (insn) == JUMP_INSN + && SET_SRC (PATTERN (insn)) == pc_rtx + && SET_DEST (PATTERN (insn)) == pc_rtx) + insn = delete_insn (insn); + + else + insn = NEXT_INSN (insn); + } +} + +/* Mark the label each jump jumps to. + Combine consecutive labels, and count uses of labels. + + For each label, make a chain (using `jump_chain') + of all the *unconditional* jumps that jump to it; + also make a chain of all returns. + + CROSS_JUMP indicates whether we are doing cross jumping + and if we are whether we will be paying attention to + death notes or not. */ + +static void +mark_all_labels (f, cross_jump) + rtx f; + int cross_jump; +{ + rtx insn; + + for (insn = f; insn; insn = NEXT_INSN (insn)) + if (GET_RTX_CLASS (GET_CODE (insn)) == 'i') + { + mark_jump_label (PATTERN (insn), insn, cross_jump); + if (! INSN_DELETED_P (insn) && GET_CODE (insn) == JUMP_INSN) + { + if (JUMP_LABEL (insn) != 0 && simplejump_p (insn)) + { + jump_chain[INSN_UID (insn)] + = jump_chain[INSN_UID (JUMP_LABEL (insn))]; + jump_chain[INSN_UID (JUMP_LABEL (insn))] = insn; + } + if (GET_CODE (PATTERN (insn)) == RETURN) + { + jump_chain[INSN_UID (insn)] = jump_chain[0]; + jump_chain[0] = insn; + } + } + } +} + +/* Delete all labels already not referenced. + Also find and return the last insn. */ + +static rtx +delete_unreferenced_labels (f) + rtx f; +{ + rtx final = NULL_RTX; + rtx insn; + + for (insn = f; insn; ) + { + if (GET_CODE (insn) == CODE_LABEL && LABEL_NUSES (insn) == 0) + insn = delete_insn (insn); + else + { + final = insn; + insn = NEXT_INSN (insn); + } + } + + return final; +} + +/* Delete various simple forms of moves which have no necessary + side effect. */ + +static void +delete_noop_moves (f) + rtx f; +{ + rtx insn, next; + + for (insn = f; insn; ) + { + next = NEXT_INSN (insn); + + if (GET_CODE (insn) == INSN) + { + register rtx body = PATTERN (insn); + +/* Combine stack_adjusts with following push_insns. */ +#ifdef PUSH_ROUNDING + if (GET_CODE (body) == SET + && SET_DEST (body) == stack_pointer_rtx + && GET_CODE (SET_SRC (body)) == PLUS + && XEXP (SET_SRC (body), 0) == stack_pointer_rtx + && GET_CODE (XEXP (SET_SRC (body), 1)) == CONST_INT + && INTVAL (XEXP (SET_SRC (body), 1)) > 0) + { + rtx p; + rtx stack_adjust_insn = insn; + int stack_adjust_amount = INTVAL (XEXP (SET_SRC (body), 1)); + int total_pushed = 0; + int pushes = 0; + + /* Find all successive push insns. */ + p = insn; + /* Don't convert more than three pushes; + that starts adding too many displaced addresses + and the whole thing starts becoming a losing + proposition. */ + while (pushes < 3) + { + rtx pbody, dest; + p = next_nonnote_insn (p); + if (p == 0 || GET_CODE (p) != INSN) + break; + pbody = PATTERN (p); + if (GET_CODE (pbody) != SET) + break; + dest = SET_DEST (pbody); + /* Allow a no-op move between the adjust and the push. */ + if (GET_CODE (dest) == REG + && GET_CODE (SET_SRC (pbody)) == REG + && REGNO (dest) == REGNO (SET_SRC (pbody))) + continue; + if (! (GET_CODE (dest) == MEM + && GET_CODE (XEXP (dest, 0)) == POST_INC + && XEXP (XEXP (dest, 0), 0) == stack_pointer_rtx)) + break; + pushes++; + if (total_pushed + GET_MODE_SIZE (GET_MODE (SET_DEST (pbody))) + > stack_adjust_amount) + break; + total_pushed += GET_MODE_SIZE (GET_MODE (SET_DEST (pbody))); + } + + /* Discard the amount pushed from the stack adjust; + maybe eliminate it entirely. */ + if (total_pushed >= stack_adjust_amount) + { + delete_computation (stack_adjust_insn); + total_pushed = stack_adjust_amount; + } + else + XEXP (SET_SRC (PATTERN (stack_adjust_insn)), 1) + = GEN_INT (stack_adjust_amount - total_pushed); + + /* Change the appropriate push insns to ordinary stores. */ + p = insn; + while (total_pushed > 0) + { + rtx pbody, dest; + p = next_nonnote_insn (p); + if (GET_CODE (p) != INSN) + break; + pbody = PATTERN (p); + if (GET_CODE (pbody) != SET) + break; + dest = SET_DEST (pbody); + /* Allow a no-op move between the adjust and the push. */ + if (GET_CODE (dest) == REG + && GET_CODE (SET_SRC (pbody)) == REG + && REGNO (dest) == REGNO (SET_SRC (pbody))) + continue; + if (! (GET_CODE (dest) == MEM + && GET_CODE (XEXP (dest, 0)) == POST_INC + && XEXP (XEXP (dest, 0), 0) == stack_pointer_rtx)) + break; + total_pushed -= GET_MODE_SIZE (GET_MODE (SET_DEST (pbody))); + /* If this push doesn't fully fit in the space + of the stack adjust that we deleted, + make another stack adjust here for what we + didn't use up. There should be peepholes + to recognize the resulting sequence of insns. */ + if (total_pushed < 0) + { + emit_insn_before (gen_add2_insn (stack_pointer_rtx, + GEN_INT (- total_pushed)), + p); + break; + } + XEXP (dest, 0) + = plus_constant (stack_pointer_rtx, total_pushed); + } + } +#endif + + /* Detect and delete no-op move instructions + resulting from not allocating a parameter in a register. */ + + if (GET_CODE (body) == SET + && (SET_DEST (body) == SET_SRC (body) + || (GET_CODE (SET_DEST (body)) == MEM + && GET_CODE (SET_SRC (body)) == MEM + && rtx_equal_p (SET_SRC (body), SET_DEST (body)))) + && ! (GET_CODE (SET_DEST (body)) == MEM + && MEM_VOLATILE_P (SET_DEST (body))) + && ! (GET_CODE (SET_SRC (body)) == MEM + && MEM_VOLATILE_P (SET_SRC (body)))) + delete_computation (insn); + + /* Detect and ignore no-op move instructions + resulting from smart or fortuitous register allocation. */ + + else if (GET_CODE (body) == SET) + { + int sreg = true_regnum (SET_SRC (body)); + int dreg = true_regnum (SET_DEST (body)); + + if (sreg == dreg && sreg >= 0) + delete_insn (insn); + else if (sreg >= 0 && dreg >= 0) + { + rtx trial; + rtx tem = find_equiv_reg (NULL_RTX, insn, 0, + sreg, NULL_PTR, dreg, + GET_MODE (SET_SRC (body))); + + if (tem != 0 + && GET_MODE (tem) == GET_MODE (SET_DEST (body))) + { + /* DREG may have been the target of a REG_DEAD note in + the insn which makes INSN redundant. If so, reorg + would still think it is dead. So search for such a + note and delete it if we find it. */ + if (! find_regno_note (insn, REG_UNUSED, dreg)) + for (trial = prev_nonnote_insn (insn); + trial && GET_CODE (trial) != CODE_LABEL; + trial = prev_nonnote_insn (trial)) + if (find_regno_note (trial, REG_DEAD, dreg)) + { + remove_death (dreg, trial); + break; + } + + /* Deleting insn could lose a death-note for SREG. */ + if ((trial = find_regno_note (insn, REG_DEAD, sreg))) + { + /* Change this into a USE so that we won't emit + code for it, but still can keep the note. */ + PATTERN (insn) + = gen_rtx_USE (VOIDmode, XEXP (trial, 0)); + INSN_CODE (insn) = -1; + /* Remove all reg notes but the REG_DEAD one. */ + REG_NOTES (insn) = trial; + XEXP (trial, 1) = NULL_RTX; + } + else + delete_insn (insn); + } + } + else if (dreg >= 0 && CONSTANT_P (SET_SRC (body)) + && find_equiv_reg (SET_SRC (body), insn, 0, dreg, + NULL_PTR, 0, + GET_MODE (SET_DEST (body)))) + { + /* This handles the case where we have two consecutive + assignments of the same constant to pseudos that didn't + get a hard reg. Each SET from the constant will be + converted into a SET of the spill register and an + output reload will be made following it. This produces + two loads of the same constant into the same spill + register. */ + + rtx in_insn = insn; + + /* Look back for a death note for the first reg. + If there is one, it is no longer accurate. */ + while (in_insn && GET_CODE (in_insn) != CODE_LABEL) + { + if ((GET_CODE (in_insn) == INSN + || GET_CODE (in_insn) == JUMP_INSN) + && find_regno_note (in_insn, REG_DEAD, dreg)) + { + remove_death (dreg, in_insn); + break; + } + in_insn = PREV_INSN (in_insn); + } + + /* Delete the second load of the value. */ + delete_insn (insn); + } + } + else if (GET_CODE (body) == PARALLEL) + { + /* If each part is a set between two identical registers or + a USE or CLOBBER, delete the insn. */ + int i, sreg, dreg; + rtx tem; + + for (i = XVECLEN (body, 0) - 1; i >= 0; i--) + { + tem = XVECEXP (body, 0, i); + if (GET_CODE (tem) == USE || GET_CODE (tem) == CLOBBER) + continue; + + if (GET_CODE (tem) != SET + || (sreg = true_regnum (SET_SRC (tem))) < 0 + || (dreg = true_regnum (SET_DEST (tem))) < 0 + || dreg != sreg) + break; + } + + if (i < 0) + delete_insn (insn); + } + /* Also delete insns to store bit fields if they are no-ops. */ + /* Not worth the hair to detect this in the big-endian case. */ + else if (! BYTES_BIG_ENDIAN + && GET_CODE (body) == SET + && GET_CODE (SET_DEST (body)) == ZERO_EXTRACT + && XEXP (SET_DEST (body), 2) == const0_rtx + && XEXP (SET_DEST (body), 0) == SET_SRC (body) + && ! (GET_CODE (SET_SRC (body)) == MEM + && MEM_VOLATILE_P (SET_SRC (body)))) + delete_insn (insn); + } + insn = next; + } +} + +/* See if there is still a NOTE_INSN_FUNCTION_END in this function. + If so indicate that this function can drop off the end by returning + 1, else return 0. + + CHECK_DELETED indicates whether we must check if the note being + searched for has the deleted flag set. + + DELETE_FINAL_NOTE indicates whether we should delete the note + if we find it. */ + +static int +calculate_can_reach_end (last, check_deleted, delete_final_note) + rtx last; + int check_deleted; + int delete_final_note; +{ + rtx insn = last; + int n_labels = 1; + + while (insn != NULL_RTX) + { + int ok = 0; + + /* One label can follow the end-note: the return label. */ + if (GET_CODE (insn) == CODE_LABEL && n_labels-- > 0) + ok = 1; + /* Ordinary insns can follow it if returning a structure. */ + else if (GET_CODE (insn) == INSN) + ok = 1; + /* If machine uses explicit RETURN insns, no epilogue, + then one of them follows the note. */ + else if (GET_CODE (insn) == JUMP_INSN + && GET_CODE (PATTERN (insn)) == RETURN) + ok = 1; + /* A barrier can follow the return insn. */ + else if (GET_CODE (insn) == BARRIER) + ok = 1; + /* Other kinds of notes can follow also. */ + else if (GET_CODE (insn) == NOTE + && NOTE_LINE_NUMBER (insn) != NOTE_INSN_FUNCTION_END) + ok = 1; + + if (ok != 1) + break; + + insn = PREV_INSN (insn); + } + + /* See if we backed up to the appropriate type of note. */ + if (insn != NULL_RTX + && GET_CODE (insn) == NOTE + && NOTE_LINE_NUMBER (insn) == NOTE_INSN_FUNCTION_END + && (check_deleted == 0 + || ! INSN_DELETED_P (insn))) + { + if (delete_final_note) + delete_insn (insn); + return 1; + } + + return 0; +} + +/* LOOP_START is a NOTE_INSN_LOOP_BEG note that is followed by an unconditional + jump. Assume that this unconditional jump is to the exit test code. If + the code is sufficiently simple, make a copy of it before INSN, + followed by a jump to the exit of the loop. Then delete the unconditional + jump after INSN. + + Return 1 if we made the change, else 0. + + This is only safe immediately after a regscan pass because it uses the + values of regno_first_uid and regno_last_uid. */ + +static int +duplicate_loop_exit_test (loop_start) + rtx loop_start; +{ + rtx insn, set, reg, p, link; + rtx copy = 0; + int num_insns = 0; + rtx exitcode = NEXT_INSN (JUMP_LABEL (next_nonnote_insn (loop_start))); + rtx lastexit; + int max_reg = max_reg_num (); + rtx *reg_map = 0; + + /* Scan the exit code. We do not perform this optimization if any insn: + + is a CALL_INSN + is a CODE_LABEL + has a REG_RETVAL or REG_LIBCALL note (hard to adjust) + is a NOTE_INSN_LOOP_BEG because this means we have a nested loop + is a NOTE_INSN_BLOCK_{BEG,END} because duplicating these notes + is not valid. + + We also do not do this if we find an insn with ASM_OPERANDS. While + this restriction should not be necessary, copying an insn with + ASM_OPERANDS can confuse asm_noperands in some cases. + + Also, don't do this if the exit code is more than 20 insns. */ + + for (insn = exitcode; + insn + && ! (GET_CODE (insn) == NOTE + && NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END); + insn = NEXT_INSN (insn)) + { + switch (GET_CODE (insn)) + { + case CODE_LABEL: + case CALL_INSN: + return 0; + case NOTE: + /* We could be in front of the wrong NOTE_INSN_LOOP_END if there is + a jump immediately after the loop start that branches outside + the loop but within an outer loop, near the exit test. + If we copied this exit test and created a phony + NOTE_INSN_LOOP_VTOP, this could make instructions immediately + before the exit test look like these could be safely moved + out of the loop even if they actually may be never executed. + This can be avoided by checking here for NOTE_INSN_LOOP_CONT. */ + + if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG + || NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_CONT) + return 0; + + if (optimize < 2 + && (NOTE_LINE_NUMBER (insn) == NOTE_INSN_BLOCK_BEG + || NOTE_LINE_NUMBER (insn) == NOTE_INSN_BLOCK_END)) + /* If we were to duplicate this code, we would not move + the BLOCK notes, and so debugging the moved code would + be difficult. Thus, we only move the code with -O2 or + higher. */ + return 0; + + break; + case JUMP_INSN: + case INSN: + /* The code below would grossly mishandle REG_WAS_0 notes, + so get rid of them here. */ + while ((p = find_reg_note (insn, REG_WAS_0, NULL_RTX)) != 0) + remove_note (insn, p); + if (++num_insns > 20 + || find_reg_note (insn, REG_RETVAL, NULL_RTX) + || find_reg_note (insn, REG_LIBCALL, NULL_RTX) + || asm_noperands (PATTERN (insn)) > 0) + return 0; + break; + default: + break; + } + } + + /* Unless INSN is zero, we can do the optimization. */ + if (insn == 0) + return 0; + + lastexit = insn; + + /* See if any insn sets a register only used in the loop exit code and + not a user variable. If so, replace it with a new register. */ + for (insn = exitcode; insn != lastexit; insn = NEXT_INSN (insn)) + if (GET_CODE (insn) == INSN + && (set = single_set (insn)) != 0 + && ((reg = SET_DEST (set), GET_CODE (reg) == REG) + || (GET_CODE (reg) == SUBREG + && (reg = SUBREG_REG (reg), GET_CODE (reg) == REG))) + && REGNO (reg) >= FIRST_PSEUDO_REGISTER + && REGNO_FIRST_UID (REGNO (reg)) == INSN_UID (insn)) + { + for (p = NEXT_INSN (insn); p != lastexit; p = NEXT_INSN (p)) + if (REGNO_LAST_UID (REGNO (reg)) == INSN_UID (p)) + break; + + if (p != lastexit) + { + /* We can do the replacement. Allocate reg_map if this is the + first replacement we found. */ + if (reg_map == 0) + { + reg_map = (rtx *) alloca (max_reg * sizeof (rtx)); + bzero ((char *) reg_map, max_reg * sizeof (rtx)); + } + + REG_LOOP_TEST_P (reg) = 1; + + reg_map[REGNO (reg)] = gen_reg_rtx (GET_MODE (reg)); + } + } + + /* Now copy each insn. */ + for (insn = exitcode; insn != lastexit; insn = NEXT_INSN (insn)) + switch (GET_CODE (insn)) + { + case BARRIER: + copy = emit_barrier_before (loop_start); + break; + case NOTE: + /* Only copy line-number notes. */ + if (NOTE_LINE_NUMBER (insn) >= 0) + { + copy = emit_note_before (NOTE_LINE_NUMBER (insn), loop_start); + NOTE_SOURCE_FILE (copy) = NOTE_SOURCE_FILE (insn); + } + break; + + case INSN: + copy = emit_insn_before (copy_rtx (PATTERN (insn)), loop_start); + if (reg_map) + replace_regs (PATTERN (copy), reg_map, max_reg, 1); + + mark_jump_label (PATTERN (copy), copy, 0); + + /* Copy all REG_NOTES except REG_LABEL since mark_jump_label will + make them. */ + for (link = REG_NOTES (insn); link; link = XEXP (link, 1)) + if (REG_NOTE_KIND (link) != REG_LABEL) + REG_NOTES (copy) + = copy_rtx (gen_rtx_EXPR_LIST (REG_NOTE_KIND (link), + XEXP (link, 0), + REG_NOTES (copy))); + if (reg_map && REG_NOTES (copy)) + replace_regs (REG_NOTES (copy), reg_map, max_reg, 1); + break; + + case JUMP_INSN: + copy = emit_jump_insn_before (copy_rtx (PATTERN (insn)), loop_start); + if (reg_map) + replace_regs (PATTERN (copy), reg_map, max_reg, 1); + mark_jump_label (PATTERN (copy), copy, 0); + if (REG_NOTES (insn)) + { + REG_NOTES (copy) = copy_rtx (REG_NOTES (insn)); + if (reg_map) + replace_regs (REG_NOTES (copy), reg_map, max_reg, 1); + } + + /* If this is a simple jump, add it to the jump chain. */ + + if (INSN_UID (copy) < max_jump_chain && JUMP_LABEL (copy) + && simplejump_p (copy)) + { + jump_chain[INSN_UID (copy)] + = jump_chain[INSN_UID (JUMP_LABEL (copy))]; + jump_chain[INSN_UID (JUMP_LABEL (copy))] = copy; + } + break; + + default: + abort (); + } + + /* Now clean up by emitting a jump to the end label and deleting the jump + at the start of the loop. */ + if (! copy || GET_CODE (copy) != BARRIER) + { + copy = emit_jump_insn_before (gen_jump (get_label_after (insn)), + loop_start); + mark_jump_label (PATTERN (copy), copy, 0); + if (INSN_UID (copy) < max_jump_chain + && INSN_UID (JUMP_LABEL (copy)) < max_jump_chain) + { + jump_chain[INSN_UID (copy)] + = jump_chain[INSN_UID (JUMP_LABEL (copy))]; + jump_chain[INSN_UID (JUMP_LABEL (copy))] = copy; + } + emit_barrier_before (loop_start); + } + + /* Mark the exit code as the virtual top of the converted loop. */ + emit_note_before (NOTE_INSN_LOOP_VTOP, exitcode); + + delete_insn (next_nonnote_insn (loop_start)); + + return 1; +} + +/* Move all block-beg, block-end, loop-beg, loop-cont, loop-vtop, and + loop-end notes between START and END out before START. Assume that + END is not such a note. START may be such a note. Returns the value + of the new starting insn, which may be different if the original start + was such a note. */ + +rtx +squeeze_notes (start, end) + rtx start, end; +{ + rtx insn; + rtx next; + + for (insn = start; insn != end; insn = next) + { + next = NEXT_INSN (insn); + if (GET_CODE (insn) == NOTE + && (NOTE_LINE_NUMBER (insn) == NOTE_INSN_BLOCK_END + || NOTE_LINE_NUMBER (insn) == NOTE_INSN_BLOCK_BEG + || NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG + || NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END + || NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_CONT + || NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_VTOP)) + { + if (insn == start) + start = next; + else + { + rtx prev = PREV_INSN (insn); + PREV_INSN (insn) = PREV_INSN (start); + NEXT_INSN (insn) = start; + NEXT_INSN (PREV_INSN (insn)) = insn; + PREV_INSN (NEXT_INSN (insn)) = insn; + NEXT_INSN (prev) = next; + PREV_INSN (next) = prev; + } + } + } + + return start; +} + +/* Compare the instructions before insn E1 with those before E2 + to find an opportunity for cross jumping. + (This means detecting identical sequences of insns followed by + jumps to the same place, or followed by a label and a jump + to that label, and replacing one with a jump to the other.) + + Assume E1 is a jump that jumps to label E2 + (that is not always true but it might as well be). + Find the longest possible equivalent sequences + and store the first insns of those sequences into *F1 and *F2. + Store zero there if no equivalent preceding instructions are found. + + We give up if we find a label in stream 1. + Actually we could transfer that label into stream 2. */ + +static void +find_cross_jump (e1, e2, minimum, f1, f2) + rtx e1, e2; + int minimum; + rtx *f1, *f2; +{ + register rtx i1 = e1, i2 = e2; + register rtx p1, p2; + int lose = 0; + + rtx last1 = 0, last2 = 0; + rtx afterlast1 = 0, afterlast2 = 0; + + *f1 = 0; + *f2 = 0; + + while (1) + { + i1 = prev_nonnote_insn (i1); + + i2 = PREV_INSN (i2); + while (i2 && (GET_CODE (i2) == NOTE || GET_CODE (i2) == CODE_LABEL)) + i2 = PREV_INSN (i2); + + if (i1 == 0) + break; + + /* Don't allow the range of insns preceding E1 or E2 + to include the other (E2 or E1). */ + if (i2 == e1 || i1 == e2) + break; + + /* If we will get to this code by jumping, those jumps will be + tensioned to go directly to the new label (before I2), + so this cross-jumping won't cost extra. So reduce the minimum. */ + if (GET_CODE (i1) == CODE_LABEL) + { + --minimum; + break; + } + + if (i2 == 0 || GET_CODE (i1) != GET_CODE (i2)) + break; + + /* Avoid moving insns across EH regions if either of the insns + can throw. */ + if (flag_exceptions + && (asynchronous_exceptions || GET_CODE (i1) == CALL_INSN) + && !in_same_eh_region (i1, i2)) + break; + + p1 = PATTERN (i1); + p2 = PATTERN (i2); + + /* If this is a CALL_INSN, compare register usage information. + If we don't check this on stack register machines, the two + CALL_INSNs might be merged leaving reg-stack.c with mismatching + numbers of stack registers in the same basic block. + If we don't check this on machines with delay slots, a delay slot may + be filled that clobbers a parameter expected by the subroutine. + + ??? We take the simple route for now and assume that if they're + equal, they were constructed identically. */ + + if (GET_CODE (i1) == CALL_INSN + && ! rtx_equal_p (CALL_INSN_FUNCTION_USAGE (i1), + CALL_INSN_FUNCTION_USAGE (i2))) + lose = 1; + +#ifdef STACK_REGS + /* If cross_jump_death_matters is not 0, the insn's mode + indicates whether or not the insn contains any stack-like + regs. */ + + if (!lose && cross_jump_death_matters && stack_regs_mentioned (i1)) + { + /* If register stack conversion has already been done, then + death notes must also be compared before it is certain that + the two instruction streams match. */ + + rtx note; + HARD_REG_SET i1_regset, i2_regset; + + CLEAR_HARD_REG_SET (i1_regset); + CLEAR_HARD_REG_SET (i2_regset); + + for (note = REG_NOTES (i1); note; note = XEXP (note, 1)) + if (REG_NOTE_KIND (note) == REG_DEAD + && STACK_REG_P (XEXP (note, 0))) + SET_HARD_REG_BIT (i1_regset, REGNO (XEXP (note, 0))); + + for (note = REG_NOTES (i2); note; note = XEXP (note, 1)) + if (REG_NOTE_KIND (note) == REG_DEAD + && STACK_REG_P (XEXP (note, 0))) + SET_HARD_REG_BIT (i2_regset, REGNO (XEXP (note, 0))); + + GO_IF_HARD_REG_EQUAL (i1_regset, i2_regset, done); + + lose = 1; + + done: + ; + } +#endif + + /* Don't allow old-style asm or volatile extended asms to be accepted + for cross jumping purposes. It is conceptually correct to allow + them, since cross-jumping preserves the dynamic instruction order + even though it is changing the static instruction order. However, + if an asm is being used to emit an assembler pseudo-op, such as + the MIPS `.set reorder' pseudo-op, then the static instruction order + matters and it must be preserved. */ + if (GET_CODE (p1) == ASM_INPUT || GET_CODE (p2) == ASM_INPUT + || (GET_CODE (p1) == ASM_OPERANDS && MEM_VOLATILE_P (p1)) + || (GET_CODE (p2) == ASM_OPERANDS && MEM_VOLATILE_P (p2))) + lose = 1; + + if (lose || GET_CODE (p1) != GET_CODE (p2) + || ! rtx_renumbered_equal_p (p1, p2)) + { + /* The following code helps take care of G++ cleanups. */ + rtx equiv1; + rtx equiv2; + + if (!lose && GET_CODE (p1) == GET_CODE (p2) + && ((equiv1 = find_reg_note (i1, REG_EQUAL, NULL_RTX)) != 0 + || (equiv1 = find_reg_note (i1, REG_EQUIV, NULL_RTX)) != 0) + && ((equiv2 = find_reg_note (i2, REG_EQUAL, NULL_RTX)) != 0 + || (equiv2 = find_reg_note (i2, REG_EQUIV, NULL_RTX)) != 0) + /* If the equivalences are not to a constant, they may + reference pseudos that no longer exist, so we can't + use them. */ + && CONSTANT_P (XEXP (equiv1, 0)) + && rtx_equal_p (XEXP (equiv1, 0), XEXP (equiv2, 0))) + { + rtx s1 = single_set (i1); + rtx s2 = single_set (i2); + if (s1 != 0 && s2 != 0 + && rtx_renumbered_equal_p (SET_DEST (s1), SET_DEST (s2))) + { + validate_change (i1, &SET_SRC (s1), XEXP (equiv1, 0), 1); + validate_change (i2, &SET_SRC (s2), XEXP (equiv2, 0), 1); + if (! rtx_renumbered_equal_p (p1, p2)) + cancel_changes (0); + else if (apply_change_group ()) + goto win; + } + } + + /* Insns fail to match; cross jumping is limited to the following + insns. */ + +#ifdef HAVE_cc0 + /* Don't allow the insn after a compare to be shared by + cross-jumping unless the compare is also shared. + Here, if either of these non-matching insns is a compare, + exclude the following insn from possible cross-jumping. */ + if (sets_cc0_p (p1) || sets_cc0_p (p2)) + last1 = afterlast1, last2 = afterlast2, ++minimum; +#endif + + /* If cross-jumping here will feed a jump-around-jump + optimization, this jump won't cost extra, so reduce + the minimum. */ + if (GET_CODE (i1) == JUMP_INSN + && JUMP_LABEL (i1) + && prev_real_insn (JUMP_LABEL (i1)) == e1) + --minimum; + break; + } + + win: + if (GET_CODE (p1) != USE && GET_CODE (p1) != CLOBBER) + { + /* Ok, this insn is potentially includable in a cross-jump here. */ + afterlast1 = last1, afterlast2 = last2; + last1 = i1, last2 = i2, --minimum; + } + } + + if (minimum <= 0 && last1 != 0 && last1 != e1) + *f1 = last1, *f2 = last2; +} + +static void +do_cross_jump (insn, newjpos, newlpos) + rtx insn, newjpos, newlpos; +{ + /* Find an existing label at this point + or make a new one if there is none. */ + register rtx label = get_label_before (newlpos); + + /* Make the same jump insn jump to the new point. */ + if (GET_CODE (PATTERN (insn)) == RETURN) + { + /* Remove from jump chain of returns. */ + delete_from_jump_chain (insn); + /* Change the insn. */ + PATTERN (insn) = gen_jump (label); + INSN_CODE (insn) = -1; + JUMP_LABEL (insn) = label; + LABEL_NUSES (label)++; + /* Add to new the jump chain. */ + if (INSN_UID (label) < max_jump_chain + && INSN_UID (insn) < max_jump_chain) + { + jump_chain[INSN_UID (insn)] = jump_chain[INSN_UID (label)]; + jump_chain[INSN_UID (label)] = insn; + } + } + else + redirect_jump (insn, label); + + /* Delete the matching insns before the jump. Also, remove any REG_EQUAL + or REG_EQUIV note in the NEWLPOS stream that isn't also present in + the NEWJPOS stream. */ + + while (newjpos != insn) + { + rtx lnote; + + for (lnote = REG_NOTES (newlpos); lnote; lnote = XEXP (lnote, 1)) + if ((REG_NOTE_KIND (lnote) == REG_EQUAL + || REG_NOTE_KIND (lnote) == REG_EQUIV) + && ! find_reg_note (newjpos, REG_EQUAL, XEXP (lnote, 0)) + && ! find_reg_note (newjpos, REG_EQUIV, XEXP (lnote, 0))) + remove_note (newlpos, lnote); + + delete_insn (newjpos); + newjpos = next_real_insn (newjpos); + newlpos = next_real_insn (newlpos); + } +} + +/* Return the label before INSN, or put a new label there. */ + +rtx +get_label_before (insn) + rtx insn; +{ + rtx label; + + /* Find an existing label at this point + or make a new one if there is none. */ + label = prev_nonnote_insn (insn); + + if (label == 0 || GET_CODE (label) != CODE_LABEL) + { + rtx prev = PREV_INSN (insn); + + label = gen_label_rtx (); + emit_label_after (label, prev); + LABEL_NUSES (label) = 0; + } + return label; +} + +/* Return the label after INSN, or put a new label there. */ + +rtx +get_label_after (insn) + rtx insn; +{ + rtx label; + + /* Find an existing label at this point + or make a new one if there is none. */ + label = next_nonnote_insn (insn); + + if (label == 0 || GET_CODE (label) != CODE_LABEL) + { + label = gen_label_rtx (); + emit_label_after (label, insn); + LABEL_NUSES (label) = 0; + } + return label; +} + +/* Return 1 if INSN is a jump that jumps to right after TARGET + only on the condition that TARGET itself would drop through. + Assumes that TARGET is a conditional jump. */ + +static int +jump_back_p (insn, target) + rtx insn, target; +{ + rtx cinsn, ctarget; + enum rtx_code codei, codet; + + if (simplejump_p (insn) || ! condjump_p (insn) + || simplejump_p (target) + || target != prev_real_insn (JUMP_LABEL (insn))) + return 0; + + cinsn = XEXP (SET_SRC (PATTERN (insn)), 0); + ctarget = XEXP (SET_SRC (PATTERN (target)), 0); + + codei = GET_CODE (cinsn); + codet = GET_CODE (ctarget); + + if (XEXP (SET_SRC (PATTERN (insn)), 1) == pc_rtx) + { + if (! can_reverse_comparison_p (cinsn, insn)) + return 0; + codei = reverse_condition (codei); + } + + if (XEXP (SET_SRC (PATTERN (target)), 2) == pc_rtx) + { + if (! can_reverse_comparison_p (ctarget, target)) + return 0; + codet = reverse_condition (codet); + } + + return (codei == codet + && rtx_renumbered_equal_p (XEXP (cinsn, 0), XEXP (ctarget, 0)) + && rtx_renumbered_equal_p (XEXP (cinsn, 1), XEXP (ctarget, 1))); +} + +/* Given a comparison, COMPARISON, inside a conditional jump insn, INSN, + return non-zero if it is safe to reverse this comparison. It is if our + floating-point is not IEEE, if this is an NE or EQ comparison, or if + this is known to be an integer comparison. */ + +int +can_reverse_comparison_p (comparison, insn) + rtx comparison; + rtx insn; +{ + rtx arg0; + + /* If this is not actually a comparison, we can't reverse it. */ + if (GET_RTX_CLASS (GET_CODE (comparison)) != '<') + return 0; + + if (TARGET_FLOAT_FORMAT != IEEE_FLOAT_FORMAT + /* If this is an NE comparison, it is safe to reverse it to an EQ + comparison and vice versa, even for floating point. If no operands + are NaNs, the reversal is valid. If some operand is a NaN, EQ is + always false and NE is always true, so the reversal is also valid. */ + || flag_fast_math + || GET_CODE (comparison) == NE + || GET_CODE (comparison) == EQ) + return 1; + + arg0 = XEXP (comparison, 0); + + /* Make sure ARG0 is one of the actual objects being compared. If we + can't do this, we can't be sure the comparison can be reversed. + + Handle cc0 and a MODE_CC register. */ + if ((GET_CODE (arg0) == REG && GET_MODE_CLASS (GET_MODE (arg0)) == MODE_CC) +#ifdef HAVE_cc0 + || arg0 == cc0_rtx +#endif + ) + { + rtx prev = prev_nonnote_insn (insn); + rtx set = single_set (prev); + + if (set == 0 || SET_DEST (set) != arg0) + return 0; + + arg0 = SET_SRC (set); + + if (GET_CODE (arg0) == COMPARE) + arg0 = XEXP (arg0, 0); + } + + /* We can reverse this if ARG0 is a CONST_INT or if its mode is + not VOIDmode and neither a MODE_CC nor MODE_FLOAT type. */ + return (GET_CODE (arg0) == CONST_INT + || (GET_MODE (arg0) != VOIDmode + && GET_MODE_CLASS (GET_MODE (arg0)) != MODE_CC + && GET_MODE_CLASS (GET_MODE (arg0)) != MODE_FLOAT)); +} + +/* Given an rtx-code for a comparison, return the code + for the negated comparison. + WATCH OUT! reverse_condition is not safe to use on a jump + that might be acting on the results of an IEEE floating point comparison, + because of the special treatment of non-signaling nans in comparisons. + Use can_reverse_comparison_p to be sure. */ + +enum rtx_code +reverse_condition (code) + enum rtx_code code; +{ + switch (code) + { + case EQ: + return NE; + + case NE: + return EQ; + + case GT: + return LE; + + case GE: + return LT; + + case LT: + return GE; + + case LE: + return GT; + + case GTU: + return LEU; + + case GEU: + return LTU; + + case LTU: + return GEU; + + case LEU: + return GTU; + + default: + abort (); + return UNKNOWN; + } +} + +/* Similar, but return the code when two operands of a comparison are swapped. + This IS safe for IEEE floating-point. */ + +enum rtx_code +swap_condition (code) + enum rtx_code code; +{ + switch (code) + { + case EQ: + case NE: + return code; + + case GT: + return LT; + + case GE: + return LE; + + case LT: + return GT; + + case LE: + return GE; + + case GTU: + return LTU; + + case GEU: + return LEU; + + case LTU: + return GTU; + + case LEU: + return GEU; + + default: + abort (); + return UNKNOWN; + } +} + +/* Given a comparison CODE, return the corresponding unsigned comparison. + If CODE is an equality comparison or already an unsigned comparison, + CODE is returned. */ + +enum rtx_code +unsigned_condition (code) + enum rtx_code code; +{ + switch (code) + { + case EQ: + case NE: + case GTU: + case GEU: + case LTU: + case LEU: + return code; + + case GT: + return GTU; + + case GE: + return GEU; + + case LT: + return LTU; + + case LE: + return LEU; + + default: + abort (); + } +} + +/* Similarly, return the signed version of a comparison. */ + +enum rtx_code +signed_condition (code) + enum rtx_code code; +{ + switch (code) + { + case EQ: + case NE: + case GT: + case GE: + case LT: + case LE: + return code; + + case GTU: + return GT; + + case GEU: + return GE; + + case LTU: + return LT; + + case LEU: + return LE; + + default: + abort (); + } +} + +/* Return non-zero if CODE1 is more strict than CODE2, i.e., if the + truth of CODE1 implies the truth of CODE2. */ + +int +comparison_dominates_p (code1, code2) + enum rtx_code code1, code2; +{ + if (code1 == code2) + return 1; + + switch (code1) + { + case EQ: + if (code2 == LE || code2 == LEU || code2 == GE || code2 == GEU) + return 1; + break; + + case LT: + if (code2 == LE || code2 == NE) + return 1; + break; + + case GT: + if (code2 == GE || code2 == NE) + return 1; + break; + + case LTU: + if (code2 == LEU || code2 == NE) + return 1; + break; + + case GTU: + if (code2 == GEU || code2 == NE) + return 1; + break; + + default: + break; + } + + return 0; +} + +/* Return 1 if INSN is an unconditional jump and nothing else. */ + +int +simplejump_p (insn) + rtx insn; +{ + return (GET_CODE (insn) == JUMP_INSN + && GET_CODE (PATTERN (insn)) == SET + && GET_CODE (SET_DEST (PATTERN (insn))) == PC + && GET_CODE (SET_SRC (PATTERN (insn))) == LABEL_REF); +} + +/* Return nonzero if INSN is a (possibly) conditional jump + and nothing more. */ + +int +condjump_p (insn) + rtx insn; +{ + register rtx x = PATTERN (insn); + if (GET_CODE (x) != SET) + return 0; + if (GET_CODE (SET_DEST (x)) != PC) + return 0; + if (GET_CODE (SET_SRC (x)) == LABEL_REF) + return 1; + if (GET_CODE (SET_SRC (x)) != IF_THEN_ELSE) + return 0; + if (XEXP (SET_SRC (x), 2) == pc_rtx + && (GET_CODE (XEXP (SET_SRC (x), 1)) == LABEL_REF + || GET_CODE (XEXP (SET_SRC (x), 1)) == RETURN)) + return 1; + if (XEXP (SET_SRC (x), 1) == pc_rtx + && (GET_CODE (XEXP (SET_SRC (x), 2)) == LABEL_REF + || GET_CODE (XEXP (SET_SRC (x), 2)) == RETURN)) + return 1; + return 0; +} + +/* Return nonzero if INSN is a (possibly) conditional jump + and nothing more. */ + +int +condjump_in_parallel_p (insn) + rtx insn; +{ + register rtx x = PATTERN (insn); + + if (GET_CODE (x) != PARALLEL) + return 0; + else + x = XVECEXP (x, 0, 0); + + if (GET_CODE (x) != SET) + return 0; + if (GET_CODE (SET_DEST (x)) != PC) + return 0; + if (GET_CODE (SET_SRC (x)) == LABEL_REF) + return 1; + if (GET_CODE (SET_SRC (x)) != IF_THEN_ELSE) + return 0; + if (XEXP (SET_SRC (x), 2) == pc_rtx + && (GET_CODE (XEXP (SET_SRC (x), 1)) == LABEL_REF + || GET_CODE (XEXP (SET_SRC (x), 1)) == RETURN)) + return 1; + if (XEXP (SET_SRC (x), 1) == pc_rtx + && (GET_CODE (XEXP (SET_SRC (x), 2)) == LABEL_REF + || GET_CODE (XEXP (SET_SRC (x), 2)) == RETURN)) + return 1; + return 0; +} + +/* Return the label of a conditional jump. */ + +rtx +condjump_label (insn) + rtx insn; +{ + register rtx x = PATTERN (insn); + + if (GET_CODE (x) == PARALLEL) + x = XVECEXP (x, 0, 0); + if (GET_CODE (x) != SET) + return NULL_RTX; + if (GET_CODE (SET_DEST (x)) != PC) + return NULL_RTX; + x = SET_SRC (x); + if (GET_CODE (x) == LABEL_REF) + return x; + if (GET_CODE (x) != IF_THEN_ELSE) + return NULL_RTX; + if (XEXP (x, 2) == pc_rtx && GET_CODE (XEXP (x, 1)) == LABEL_REF) + return XEXP (x, 1); + if (XEXP (x, 1) == pc_rtx && GET_CODE (XEXP (x, 2)) == LABEL_REF) + return XEXP (x, 2); + return NULL_RTX; +} + +/* Return true if INSN is a (possibly conditional) return insn. */ + +static int +returnjump_p_1 (loc, data) + rtx *loc; + void *data ATTRIBUTE_UNUSED; +{ + rtx x = *loc; + return GET_CODE (x) == RETURN; +} + +int +returnjump_p (insn) + rtx insn; +{ + return for_each_rtx (&PATTERN (insn), returnjump_p_1, NULL); +} + +#ifdef HAVE_cc0 + +/* Return 1 if X is an RTX that does nothing but set the condition codes + and CLOBBER or USE registers. + Return -1 if X does explicitly set the condition codes, + but also does other things. */ + +int +sets_cc0_p (x) + rtx x ATTRIBUTE_UNUSED; +{ + if (GET_CODE (x) == SET && SET_DEST (x) == cc0_rtx) + return 1; + if (GET_CODE (x) == PARALLEL) + { + int i; + int sets_cc0 = 0; + int other_things = 0; + for (i = XVECLEN (x, 0) - 1; i >= 0; i--) + { + if (GET_CODE (XVECEXP (x, 0, i)) == SET + && SET_DEST (XVECEXP (x, 0, i)) == cc0_rtx) + sets_cc0 = 1; + else if (GET_CODE (XVECEXP (x, 0, i)) == SET) + other_things = 1; + } + return ! sets_cc0 ? 0 : other_things ? -1 : 1; + } + return 0; +} +#endif + +/* Follow any unconditional jump at LABEL; + return the ultimate label reached by any such chain of jumps. + If LABEL is not followed by a jump, return LABEL. + If the chain loops or we can't find end, return LABEL, + since that tells caller to avoid changing the insn. + + If RELOAD_COMPLETED is 0, we do not chain across a NOTE_INSN_LOOP_BEG or + a USE or CLOBBER. */ + +rtx +follow_jumps (label) + rtx label; +{ + register rtx insn; + register rtx next; + register rtx value = label; + register int depth; + + for (depth = 0; + (depth < 10 + && (insn = next_active_insn (value)) != 0 + && GET_CODE (insn) == JUMP_INSN + && ((JUMP_LABEL (insn) != 0 && simplejump_p (insn)) + || GET_CODE (PATTERN (insn)) == RETURN) + && (next = NEXT_INSN (insn)) + && GET_CODE (next) == BARRIER); + depth++) + { + /* Don't chain through the insn that jumps into a loop + from outside the loop, + since that would create multiple loop entry jumps + and prevent loop optimization. */ + rtx tem; + if (!reload_completed) + for (tem = value; tem != insn; tem = NEXT_INSN (tem)) + if (GET_CODE (tem) == NOTE + && (NOTE_LINE_NUMBER (tem) == NOTE_INSN_LOOP_BEG + /* ??? Optional. Disables some optimizations, but makes + gcov output more accurate with -O. */ + || (flag_test_coverage && NOTE_LINE_NUMBER (tem) > 0))) + return value; + + /* If we have found a cycle, make the insn jump to itself. */ + if (JUMP_LABEL (insn) == label) + return label; + + tem = next_active_insn (JUMP_LABEL (insn)); + if (tem && (GET_CODE (PATTERN (tem)) == ADDR_VEC + || GET_CODE (PATTERN (tem)) == ADDR_DIFF_VEC)) + break; + + value = JUMP_LABEL (insn); + } + if (depth == 10) + return label; + return value; +} + +/* Assuming that field IDX of X is a vector of label_refs, + replace each of them by the ultimate label reached by it. + Return nonzero if a change is made. + If IGNORE_LOOPS is 0, we do not chain across a NOTE_INSN_LOOP_BEG. */ + +static int +tension_vector_labels (x, idx) + register rtx x; + register int idx; +{ + int changed = 0; + register int i; + for (i = XVECLEN (x, idx) - 1; i >= 0; i--) + { + register rtx olabel = XEXP (XVECEXP (x, idx, i), 0); + register rtx nlabel = follow_jumps (olabel); + if (nlabel && nlabel != olabel) + { + XEXP (XVECEXP (x, idx, i), 0) = nlabel; + ++LABEL_NUSES (nlabel); + if (--LABEL_NUSES (olabel) == 0) + delete_insn (olabel); + changed = 1; + } + } + return changed; +} + +/* Find all CODE_LABELs referred to in X, and increment their use counts. + If INSN is a JUMP_INSN and there is at least one CODE_LABEL referenced + in INSN, then store one of them in JUMP_LABEL (INSN). + If INSN is an INSN or a CALL_INSN and there is at least one CODE_LABEL + referenced in INSN, add a REG_LABEL note containing that label to INSN. + Also, when there are consecutive labels, canonicalize on the last of them. + + Note that two labels separated by a loop-beginning note + must be kept distinct if we have not yet done loop-optimization, + because the gap between them is where loop-optimize + will want to move invariant code to. CROSS_JUMP tells us + that loop-optimization is done with. + + Once reload has completed (CROSS_JUMP non-zero), we need not consider + two labels distinct if they are separated by only USE or CLOBBER insns. */ + +static void +mark_jump_label (x, insn, cross_jump) + register rtx x; + rtx insn; + int cross_jump; +{ + register RTX_CODE code = GET_CODE (x); + register int i; + register char *fmt; + + switch (code) + { + case PC: + case CC0: + case REG: + case SUBREG: + case CONST_INT: + case SYMBOL_REF: + case CONST_DOUBLE: + case CLOBBER: + case CALL: + return; + + case MEM: + /* If this is a constant-pool reference, see if it is a label. */ + if (GET_CODE (XEXP (x, 0)) == SYMBOL_REF + && CONSTANT_POOL_ADDRESS_P (XEXP (x, 0))) + mark_jump_label (get_pool_constant (XEXP (x, 0)), insn, cross_jump); + break; + + case LABEL_REF: + { + rtx label = XEXP (x, 0); + rtx olabel = label; + rtx note; + rtx next; + + if (GET_CODE (label) != CODE_LABEL) + abort (); + + /* Ignore references to labels of containing functions. */ + if (LABEL_REF_NONLOCAL_P (x)) + break; + + /* If there are other labels following this one, + replace it with the last of the consecutive labels. */ + for (next = NEXT_INSN (label); next; next = NEXT_INSN (next)) + { + if (GET_CODE (next) == CODE_LABEL) + label = next; + else if (cross_jump && GET_CODE (next) == INSN + && (GET_CODE (PATTERN (next)) == USE + || GET_CODE (PATTERN (next)) == CLOBBER)) + continue; + else if (GET_CODE (next) != NOTE) + break; + else if (! cross_jump + && (NOTE_LINE_NUMBER (next) == NOTE_INSN_LOOP_BEG + || NOTE_LINE_NUMBER (next) == NOTE_INSN_FUNCTION_END + /* ??? Optional. Disables some optimizations, but + makes gcov output more accurate with -O. */ + || (flag_test_coverage && NOTE_LINE_NUMBER (next) > 0))) + break; + } + + XEXP (x, 0) = label; + if (! insn || ! INSN_DELETED_P (insn)) + ++LABEL_NUSES (label); + + if (insn) + { + if (GET_CODE (insn) == JUMP_INSN) + JUMP_LABEL (insn) = label; + + /* If we've changed OLABEL and we had a REG_LABEL note + for it, update it as well. */ + else if (label != olabel + && (note = find_reg_note (insn, REG_LABEL, olabel)) != 0) + XEXP (note, 0) = label; + + /* Otherwise, add a REG_LABEL note for LABEL unless there already + is one. */ + else if (! find_reg_note (insn, REG_LABEL, label)) + { + /* This code used to ignore labels which refered to dispatch + tables to avoid flow.c generating worse code. + + However, in the presense of global optimizations like + gcse which call find_basic_blocks without calling + life_analysis, not recording such labels will lead + to compiler aborts because of inconsistencies in the + flow graph. So we go ahead and record the label. + + It may also be the case that the optimization argument + is no longer valid because of the more accurate cfg + we build in find_basic_blocks -- it no longer pessimizes + code when it finds a REG_LABEL note. */ + REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_LABEL, label, + REG_NOTES (insn)); + } + } + return; + } + + /* Do walk the labels in a vector, but not the first operand of an + ADDR_DIFF_VEC. Don't set the JUMP_LABEL of a vector. */ + case ADDR_VEC: + case ADDR_DIFF_VEC: + if (! INSN_DELETED_P (insn)) + { + int eltnum = code == ADDR_DIFF_VEC ? 1 : 0; + + for (i = 0; i < XVECLEN (x, eltnum); i++) + mark_jump_label (XVECEXP (x, eltnum, i), NULL_RTX, cross_jump); + } + return; + + default: + break; + } + + fmt = GET_RTX_FORMAT (code); + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + { + if (fmt[i] == 'e') + mark_jump_label (XEXP (x, i), insn, cross_jump); + else if (fmt[i] == 'E') + { + register int j; + for (j = 0; j < XVECLEN (x, i); j++) + mark_jump_label (XVECEXP (x, i, j), insn, cross_jump); + } + } +} + +/* If all INSN does is set the pc, delete it, + and delete the insn that set the condition codes for it + if that's what the previous thing was. */ + +void +delete_jump (insn) + rtx insn; +{ + register rtx set = single_set (insn); + + if (set && GET_CODE (SET_DEST (set)) == PC) + delete_computation (insn); +} + +/* Delete INSN and recursively delete insns that compute values used only + by INSN. This uses the REG_DEAD notes computed during flow analysis. + If we are running before flow.c, we need do nothing since flow.c will + delete dead code. We also can't know if the registers being used are + dead or not at this point. + + Otherwise, look at all our REG_DEAD notes. If a previous insn does + nothing other than set a register that dies in this insn, we can delete + that insn as well. + + On machines with CC0, if CC0 is used in this insn, we may be able to + delete the insn that set it. */ + +static void +delete_computation (insn) + rtx insn; +{ + rtx note, next; + +#ifdef HAVE_cc0 + if (reg_referenced_p (cc0_rtx, PATTERN (insn))) + { + rtx prev = prev_nonnote_insn (insn); + /* We assume that at this stage + CC's are always set explicitly + and always immediately before the jump that + will use them. So if the previous insn + exists to set the CC's, delete it + (unless it performs auto-increments, etc.). */ + if (prev && GET_CODE (prev) == INSN + && sets_cc0_p (PATTERN (prev))) + { + if (sets_cc0_p (PATTERN (prev)) > 0 + && !FIND_REG_INC_NOTE (prev, NULL_RTX)) + delete_computation (prev); + else + /* Otherwise, show that cc0 won't be used. */ + REG_NOTES (prev) = gen_rtx_EXPR_LIST (REG_UNUSED, + cc0_rtx, REG_NOTES (prev)); + } + } +#endif + +#ifdef INSN_SCHEDULING + /* ?!? The schedulers do not keep REG_DEAD notes accurate after + reload has completed. The schedulers need to be fixed. Until + they are, we must not rely on the death notes here. */ + if (reload_completed && flag_schedule_insns_after_reload) + { + delete_insn (insn); + return; + } +#endif + + for (note = REG_NOTES (insn); note; note = next) + { + rtx our_prev; + + next = XEXP (note, 1); + + if (REG_NOTE_KIND (note) != REG_DEAD + /* Verify that the REG_NOTE is legitimate. */ + || GET_CODE (XEXP (note, 0)) != REG) + continue; + + for (our_prev = prev_nonnote_insn (insn); + our_prev && GET_CODE (our_prev) == INSN; + our_prev = prev_nonnote_insn (our_prev)) + { + /* If we reach a SEQUENCE, it is too complex to try to + do anything with it, so give up. */ + if (GET_CODE (PATTERN (our_prev)) == SEQUENCE) + break; + + if (GET_CODE (PATTERN (our_prev)) == USE + && GET_CODE (XEXP (PATTERN (our_prev), 0)) == INSN) + /* reorg creates USEs that look like this. We leave them + alone because reorg needs them for its own purposes. */ + break; + + if (reg_set_p (XEXP (note, 0), PATTERN (our_prev))) + { + if (FIND_REG_INC_NOTE (our_prev, NULL_RTX)) + break; + + if (GET_CODE (PATTERN (our_prev)) == PARALLEL) + { + /* If we find a SET of something else, we can't + delete the insn. */ + + int i; + + for (i = 0; i < XVECLEN (PATTERN (our_prev), 0); i++) + { + rtx part = XVECEXP (PATTERN (our_prev), 0, i); + + if (GET_CODE (part) == SET + && SET_DEST (part) != XEXP (note, 0)) + break; + } + + if (i == XVECLEN (PATTERN (our_prev), 0)) + delete_computation (our_prev); + } + else if (GET_CODE (PATTERN (our_prev)) == SET + && SET_DEST (PATTERN (our_prev)) == XEXP (note, 0)) + delete_computation (our_prev); + + break; + } + + /* If OUR_PREV references the register that dies here, it is an + additional use. Hence any prior SET isn't dead. However, this + insn becomes the new place for the REG_DEAD note. */ + if (reg_overlap_mentioned_p (XEXP (note, 0), + PATTERN (our_prev))) + { + XEXP (note, 1) = REG_NOTES (our_prev); + REG_NOTES (our_prev) = note; + break; + } + } + } + + delete_insn (insn); +} + +/* Delete insn INSN from the chain of insns and update label ref counts. + May delete some following insns as a consequence; may even delete + a label elsewhere and insns that follow it. + + Returns the first insn after INSN that was not deleted. */ + +rtx +delete_insn (insn) + register rtx insn; +{ + register rtx next = NEXT_INSN (insn); + register rtx prev = PREV_INSN (insn); + register int was_code_label = (GET_CODE (insn) == CODE_LABEL); + register int dont_really_delete = 0; + + while (next && INSN_DELETED_P (next)) + next = NEXT_INSN (next); + + /* This insn is already deleted => return first following nondeleted. */ + if (INSN_DELETED_P (insn)) + return next; + + if (was_code_label) + remove_node_from_expr_list (insn, &nonlocal_goto_handler_labels); + + /* Don't delete user-declared labels. Convert them to special NOTEs + instead. */ + if (was_code_label && LABEL_NAME (insn) != 0 + && optimize && ! dont_really_delete) + { + PUT_CODE (insn, NOTE); + NOTE_LINE_NUMBER (insn) = NOTE_INSN_DELETED_LABEL; + NOTE_SOURCE_FILE (insn) = 0; + dont_really_delete = 1; + } + else + /* Mark this insn as deleted. */ + INSN_DELETED_P (insn) = 1; + + /* If this is an unconditional jump, delete it from the jump chain. */ + if (simplejump_p (insn)) + delete_from_jump_chain (insn); + + /* If instruction is followed by a barrier, + delete the barrier too. */ + + if (next != 0 && GET_CODE (next) == BARRIER) + { + INSN_DELETED_P (next) = 1; + next = NEXT_INSN (next); + } + + /* Patch out INSN (and the barrier if any) */ + + if (optimize && ! dont_really_delete) + { + if (prev) + { + NEXT_INSN (prev) = next; + if (GET_CODE (prev) == INSN && GET_CODE (PATTERN (prev)) == SEQUENCE) + NEXT_INSN (XVECEXP (PATTERN (prev), 0, + XVECLEN (PATTERN (prev), 0) - 1)) = next; + } + + if (next) + { + PREV_INSN (next) = prev; + if (GET_CODE (next) == INSN && GET_CODE (PATTERN (next)) == SEQUENCE) + PREV_INSN (XVECEXP (PATTERN (next), 0, 0)) = prev; + } + + if (prev && NEXT_INSN (prev) == 0) + set_last_insn (prev); + } + + /* If deleting a jump, decrement the count of the label, + and delete the label if it is now unused. */ + + if (GET_CODE (insn) == JUMP_INSN && JUMP_LABEL (insn)) + if (--LABEL_NUSES (JUMP_LABEL (insn)) == 0) + { + /* This can delete NEXT or PREV, + either directly if NEXT is JUMP_LABEL (INSN), + or indirectly through more levels of jumps. */ + delete_insn (JUMP_LABEL (insn)); + /* I feel a little doubtful about this loop, + but I see no clean and sure alternative way + to find the first insn after INSN that is not now deleted. + I hope this works. */ + while (next && INSN_DELETED_P (next)) + next = NEXT_INSN (next); + return next; + } + + /* Likewise if we're deleting a dispatch table. */ + + if (GET_CODE (insn) == JUMP_INSN + && (GET_CODE (PATTERN (insn)) == ADDR_VEC + || GET_CODE (PATTERN (insn)) == ADDR_DIFF_VEC)) + { + rtx pat = PATTERN (insn); + int i, diff_vec_p = GET_CODE (pat) == ADDR_DIFF_VEC; + int len = XVECLEN (pat, diff_vec_p); + + for (i = 0; i < len; i++) + if (--LABEL_NUSES (XEXP (XVECEXP (pat, diff_vec_p, i), 0)) == 0) + delete_insn (XEXP (XVECEXP (pat, diff_vec_p, i), 0)); + while (next && INSN_DELETED_P (next)) + next = NEXT_INSN (next); + return next; + } + + while (prev && (INSN_DELETED_P (prev) || GET_CODE (prev) == NOTE)) + prev = PREV_INSN (prev); + + /* If INSN was a label and a dispatch table follows it, + delete the dispatch table. The tablejump must have gone already. + It isn't useful to fall through into a table. */ + + if (was_code_label + && NEXT_INSN (insn) != 0 + && GET_CODE (NEXT_INSN (insn)) == JUMP_INSN + && (GET_CODE (PATTERN (NEXT_INSN (insn))) == ADDR_VEC + || GET_CODE (PATTERN (NEXT_INSN (insn))) == ADDR_DIFF_VEC)) + next = delete_insn (NEXT_INSN (insn)); + + /* If INSN was a label, delete insns following it if now unreachable. */ + + if (was_code_label && prev && GET_CODE (prev) == BARRIER) + { + register RTX_CODE code; + while (next != 0 + && (GET_RTX_CLASS (code = GET_CODE (next)) == 'i' + || code == NOTE || code == BARRIER + || (code == CODE_LABEL && INSN_DELETED_P (next)))) + { + if (code == NOTE + && NOTE_LINE_NUMBER (next) != NOTE_INSN_FUNCTION_END) + next = NEXT_INSN (next); + /* Keep going past other deleted labels to delete what follows. */ + else if (code == CODE_LABEL && INSN_DELETED_P (next)) + next = NEXT_INSN (next); + else + /* Note: if this deletes a jump, it can cause more + deletion of unreachable code, after a different label. + As long as the value from this recursive call is correct, + this invocation functions correctly. */ + next = delete_insn (next); + } + } + + return next; +} + +/* Advance from INSN till reaching something not deleted + then return that. May return INSN itself. */ + +rtx +next_nondeleted_insn (insn) + rtx insn; +{ + while (INSN_DELETED_P (insn)) + insn = NEXT_INSN (insn); + return insn; +} + +/* Delete a range of insns from FROM to TO, inclusive. + This is for the sake of peephole optimization, so assume + that whatever these insns do will still be done by a new + peephole insn that will replace them. */ + +void +delete_for_peephole (from, to) + register rtx from, to; +{ + register rtx insn = from; + + while (1) + { + register rtx next = NEXT_INSN (insn); + register rtx prev = PREV_INSN (insn); + + if (GET_CODE (insn) != NOTE) + { + INSN_DELETED_P (insn) = 1; + + /* Patch this insn out of the chain. */ + /* We don't do this all at once, because we + must preserve all NOTEs. */ + if (prev) + NEXT_INSN (prev) = next; + + if (next) + PREV_INSN (next) = prev; + } + + if (insn == to) + break; + insn = next; + } + + /* Note that if TO is an unconditional jump + we *do not* delete the BARRIER that follows, + since the peephole that replaces this sequence + is also an unconditional jump in that case. */ +} + +/* Invert the condition of the jump JUMP, and make it jump + to label NLABEL instead of where it jumps now. */ + +int +invert_jump (jump, nlabel) + rtx jump, nlabel; +{ + /* We have to either invert the condition and change the label or + do neither. Either operation could fail. We first try to invert + the jump. If that succeeds, we try changing the label. If that fails, + we invert the jump back to what it was. */ + + if (! invert_exp (PATTERN (jump), jump)) + return 0; + + if (redirect_jump (jump, nlabel)) + { + if (flag_branch_probabilities) + { + rtx note = find_reg_note (jump, REG_BR_PROB, 0); + + /* An inverted jump means that a probability taken becomes a + probability not taken. Subtract the branch probability from the + probability base to convert it back to a taken probability. + (We don't flip the probability on a branch that's never taken. */ + if (note && XINT (XEXP (note, 0), 0) >= 0) + XINT (XEXP (note, 0), 0) = REG_BR_PROB_BASE - XINT (XEXP (note, 0), 0); + } + + return 1; + } + + if (! invert_exp (PATTERN (jump), jump)) + /* This should just be putting it back the way it was. */ + abort (); + + return 0; +} + +/* Invert the jump condition of rtx X contained in jump insn, INSN. + + Return 1 if we can do so, 0 if we cannot find a way to do so that + matches a pattern. */ + +int +invert_exp (x, insn) + rtx x; + rtx insn; +{ + register RTX_CODE code; + register int i; + register char *fmt; + + code = GET_CODE (x); + + if (code == IF_THEN_ELSE) + { + register rtx comp = XEXP (x, 0); + register rtx tem; + + /* We can do this in two ways: The preferable way, which can only + be done if this is not an integer comparison, is to reverse + the comparison code. Otherwise, swap the THEN-part and ELSE-part + of the IF_THEN_ELSE. If we can't do either, fail. */ + + if (can_reverse_comparison_p (comp, insn) + && validate_change (insn, &XEXP (x, 0), + gen_rtx_fmt_ee (reverse_condition (GET_CODE (comp)), + GET_MODE (comp), XEXP (comp, 0), + XEXP (comp, 1)), 0)) + return 1; + + tem = XEXP (x, 1); + validate_change (insn, &XEXP (x, 1), XEXP (x, 2), 1); + validate_change (insn, &XEXP (x, 2), tem, 1); + return apply_change_group (); + } + + fmt = GET_RTX_FORMAT (code); + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + { + if (fmt[i] == 'e') + if (! invert_exp (XEXP (x, i), insn)) + return 0; + if (fmt[i] == 'E') + { + register int j; + for (j = 0; j < XVECLEN (x, i); j++) + if (!invert_exp (XVECEXP (x, i, j), insn)) + return 0; + } + } + + return 1; +} + +/* Make jump JUMP jump to label NLABEL instead of where it jumps now. + If the old jump target label is unused as a result, + it and the code following it may be deleted. + + If NLABEL is zero, we are to turn the jump into a (possibly conditional) + RETURN insn. + + The return value will be 1 if the change was made, 0 if it wasn't (this + can only occur for NLABEL == 0). */ + +int +redirect_jump (jump, nlabel) + rtx jump, nlabel; +{ + register rtx olabel = JUMP_LABEL (jump); + + if (nlabel == olabel) + return 1; + + if (! redirect_exp (&PATTERN (jump), olabel, nlabel, jump)) + return 0; + + /* If this is an unconditional branch, delete it from the jump_chain of + OLABEL and add it to the jump_chain of NLABEL (assuming both labels + have UID's in range and JUMP_CHAIN is valid). */ + if (jump_chain && (simplejump_p (jump) + || GET_CODE (PATTERN (jump)) == RETURN)) + { + int label_index = nlabel ? INSN_UID (nlabel) : 0; + + delete_from_jump_chain (jump); + if (label_index < max_jump_chain + && INSN_UID (jump) < max_jump_chain) + { + jump_chain[INSN_UID (jump)] = jump_chain[label_index]; + jump_chain[label_index] = jump; + } + } + + JUMP_LABEL (jump) = nlabel; + if (nlabel) + ++LABEL_NUSES (nlabel); + + if (olabel && --LABEL_NUSES (olabel) == 0) + delete_insn (olabel); + + return 1; +} + +/* Delete the instruction JUMP from any jump chain it might be on. */ + +static void +delete_from_jump_chain (jump) + rtx jump; +{ + int index; + rtx olabel = JUMP_LABEL (jump); + + /* Handle unconditional jumps. */ + if (jump_chain && olabel != 0 + && INSN_UID (olabel) < max_jump_chain + && simplejump_p (jump)) + index = INSN_UID (olabel); + /* Handle return insns. */ + else if (jump_chain && GET_CODE (PATTERN (jump)) == RETURN) + index = 0; + else return; + + if (jump_chain[index] == jump) + jump_chain[index] = jump_chain[INSN_UID (jump)]; + else + { + rtx insn; + + for (insn = jump_chain[index]; + insn != 0; + insn = jump_chain[INSN_UID (insn)]) + if (jump_chain[INSN_UID (insn)] == jump) + { + jump_chain[INSN_UID (insn)] = jump_chain[INSN_UID (jump)]; + break; + } + } +} + +/* If NLABEL is nonzero, throughout the rtx at LOC, + alter (LABEL_REF OLABEL) to (LABEL_REF NLABEL). If OLABEL is + zero, alter (RETURN) to (LABEL_REF NLABEL). + + If NLABEL is zero, alter (LABEL_REF OLABEL) to (RETURN) and check + validity with validate_change. Convert (set (pc) (label_ref olabel)) + to (return). + + Return 0 if we found a change we would like to make but it is invalid. + Otherwise, return 1. */ + +int +redirect_exp (loc, olabel, nlabel, insn) + rtx *loc; + rtx olabel, nlabel; + rtx insn; +{ + register rtx x = *loc; + register RTX_CODE code = GET_CODE (x); + register int i; + register char *fmt; + + if (code == LABEL_REF) + { + if (XEXP (x, 0) == olabel) + { + if (nlabel) + XEXP (x, 0) = nlabel; + else + return validate_change (insn, loc, gen_rtx_RETURN (VOIDmode), 0); + return 1; + } + } + else if (code == RETURN && olabel == 0) + { + x = gen_rtx_LABEL_REF (VOIDmode, nlabel); + if (loc == &PATTERN (insn)) + x = gen_rtx_SET (VOIDmode, pc_rtx, x); + return validate_change (insn, loc, x, 0); + } + + if (code == SET && nlabel == 0 && SET_DEST (x) == pc_rtx + && GET_CODE (SET_SRC (x)) == LABEL_REF + && XEXP (SET_SRC (x), 0) == olabel) + return validate_change (insn, loc, gen_rtx_RETURN (VOIDmode), 0); + + fmt = GET_RTX_FORMAT (code); + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + { + if (fmt[i] == 'e') + if (! redirect_exp (&XEXP (x, i), olabel, nlabel, insn)) + return 0; + if (fmt[i] == 'E') + { + register int j; + for (j = 0; j < XVECLEN (x, i); j++) + if (! redirect_exp (&XVECEXP (x, i, j), olabel, nlabel, insn)) + return 0; + } + } + + return 1; +} + +/* Make jump JUMP jump to label NLABEL, assuming it used to be a tablejump. + + If the old jump target label (before the dispatch table) becomes unused, + it and the dispatch table may be deleted. In that case, find the insn + before the jump references that label and delete it and logical successors + too. */ + +static void +redirect_tablejump (jump, nlabel) + rtx jump, nlabel; +{ + register rtx olabel = JUMP_LABEL (jump); + + /* Add this jump to the jump_chain of NLABEL. */ + if (jump_chain && INSN_UID (nlabel) < max_jump_chain + && INSN_UID (jump) < max_jump_chain) + { + jump_chain[INSN_UID (jump)] = jump_chain[INSN_UID (nlabel)]; + jump_chain[INSN_UID (nlabel)] = jump; + } + + PATTERN (jump) = gen_jump (nlabel); + JUMP_LABEL (jump) = nlabel; + ++LABEL_NUSES (nlabel); + INSN_CODE (jump) = -1; + + if (--LABEL_NUSES (olabel) == 0) + { + delete_labelref_insn (jump, olabel, 0); + delete_insn (olabel); + } +} + +/* Find the insn referencing LABEL that is a logical predecessor of INSN. + If we found one, delete it and then delete this insn if DELETE_THIS is + non-zero. Return non-zero if INSN or a predecessor references LABEL. */ + +static int +delete_labelref_insn (insn, label, delete_this) + rtx insn, label; + int delete_this; +{ + int deleted = 0; + rtx link; + + if (GET_CODE (insn) != NOTE + && reg_mentioned_p (label, PATTERN (insn))) + { + if (delete_this) + { + delete_insn (insn); + deleted = 1; + } + else + return 1; + } + + for (link = LOG_LINKS (insn); link; link = XEXP (link, 1)) + if (delete_labelref_insn (XEXP (link, 0), label, 1)) + { + if (delete_this) + { + delete_insn (insn); + deleted = 1; + } + else + return 1; + } + + return deleted; +} + +/* Like rtx_equal_p except that it considers two REGs as equal + if they renumber to the same value and considers two commutative + operations to be the same if the order of the operands has been + reversed. + + ??? Addition is not commutative on the PA due to the weird implicit + space register selection rules for memory addresses. Therefore, we + don't consider a + b == b + a. + + We could/should make this test a little tighter. Possibly only + disabling it on the PA via some backend macro or only disabling this + case when the PLUS is inside a MEM. */ + +int +rtx_renumbered_equal_p (x, y) + rtx x, y; +{ + register int i; + register RTX_CODE code = GET_CODE (x); + register char *fmt; + + if (x == y) + return 1; + + if ((code == REG || (code == SUBREG && GET_CODE (SUBREG_REG (x)) == REG)) + && (GET_CODE (y) == REG || (GET_CODE (y) == SUBREG + && GET_CODE (SUBREG_REG (y)) == REG))) + { + int reg_x = -1, reg_y = -1; + int word_x = 0, word_y = 0; + + if (GET_MODE (x) != GET_MODE (y)) + return 0; + + /* If we haven't done any renumbering, don't + make any assumptions. */ + if (reg_renumber == 0) + return rtx_equal_p (x, y); + + if (code == SUBREG) + { + reg_x = REGNO (SUBREG_REG (x)); + word_x = SUBREG_WORD (x); + + if (reg_renumber[reg_x] >= 0) + { + reg_x = reg_renumber[reg_x] + word_x; + word_x = 0; + } + } + + else + { + reg_x = REGNO (x); + if (reg_renumber[reg_x] >= 0) + reg_x = reg_renumber[reg_x]; + } + + if (GET_CODE (y) == SUBREG) + { + reg_y = REGNO (SUBREG_REG (y)); + word_y = SUBREG_WORD (y); + + if (reg_renumber[reg_y] >= 0) + { + reg_y = reg_renumber[reg_y]; + word_y = 0; + } + } + + else + { + reg_y = REGNO (y); + if (reg_renumber[reg_y] >= 0) + reg_y = reg_renumber[reg_y]; + } + + return reg_x >= 0 && reg_x == reg_y && word_x == word_y; + } + + /* Now we have disposed of all the cases + in which different rtx codes can match. */ + if (code != GET_CODE (y)) + return 0; + + switch (code) + { + case PC: + case CC0: + case ADDR_VEC: + case ADDR_DIFF_VEC: + return 0; + + case CONST_INT: + return INTVAL (x) == INTVAL (y); + + case LABEL_REF: + /* We can't assume nonlocal labels have their following insns yet. */ + if (LABEL_REF_NONLOCAL_P (x) || LABEL_REF_NONLOCAL_P (y)) + return XEXP (x, 0) == XEXP (y, 0); + + /* Two label-refs are equivalent if they point at labels + in the same position in the instruction stream. */ + return (next_real_insn (XEXP (x, 0)) + == next_real_insn (XEXP (y, 0))); + + case SYMBOL_REF: + return XSTR (x, 0) == XSTR (y, 0); + + case CODE_LABEL: + /* If we didn't match EQ equality above, they aren't the same. */ + return 0; + + default: + break; + } + + /* (MULT:SI x y) and (MULT:HI x y) are NOT equivalent. */ + + if (GET_MODE (x) != GET_MODE (y)) + return 0; + + /* For commutative operations, the RTX match if the operand match in any + order. Also handle the simple binary and unary cases without a loop. + + ??? Don't consider PLUS a commutative operator; see comments above. */ + if ((code == EQ || code == NE || GET_RTX_CLASS (code) == 'c') + && code != PLUS) + return ((rtx_renumbered_equal_p (XEXP (x, 0), XEXP (y, 0)) + && rtx_renumbered_equal_p (XEXP (x, 1), XEXP (y, 1))) + || (rtx_renumbered_equal_p (XEXP (x, 0), XEXP (y, 1)) + && rtx_renumbered_equal_p (XEXP (x, 1), XEXP (y, 0)))); + else if (GET_RTX_CLASS (code) == '<' || GET_RTX_CLASS (code) == '2') + return (rtx_renumbered_equal_p (XEXP (x, 0), XEXP (y, 0)) + && rtx_renumbered_equal_p (XEXP (x, 1), XEXP (y, 1))); + else if (GET_RTX_CLASS (code) == '1') + return rtx_renumbered_equal_p (XEXP (x, 0), XEXP (y, 0)); + + /* Compare the elements. If any pair of corresponding elements + fail to match, return 0 for the whole things. */ + + fmt = GET_RTX_FORMAT (code); + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + { + register int j; + switch (fmt[i]) + { + case 'w': + if (XWINT (x, i) != XWINT (y, i)) + return 0; + break; + + case 'i': + if (XINT (x, i) != XINT (y, i)) + return 0; + break; + + case 's': + if (strcmp (XSTR (x, i), XSTR (y, i))) + return 0; + break; + + case 'e': + if (! rtx_renumbered_equal_p (XEXP (x, i), XEXP (y, i))) + return 0; + break; + + case 'u': + if (XEXP (x, i) != XEXP (y, i)) + return 0; + /* fall through. */ + case '0': + break; + + case 'E': + if (XVECLEN (x, i) != XVECLEN (y, i)) + return 0; + for (j = XVECLEN (x, i) - 1; j >= 0; j--) + if (!rtx_renumbered_equal_p (XVECEXP (x, i, j), XVECEXP (y, i, j))) + return 0; + break; + + default: + abort (); + } + } + return 1; +} + +/* If X is a hard register or equivalent to one or a subregister of one, + return the hard register number. If X is a pseudo register that was not + assigned a hard register, return the pseudo register number. Otherwise, + return -1. Any rtx is valid for X. */ + +int +true_regnum (x) + rtx x; +{ + if (GET_CODE (x) == REG) + { + if (REGNO (x) >= FIRST_PSEUDO_REGISTER && reg_renumber[REGNO (x)] >= 0) + return reg_renumber[REGNO (x)]; + return REGNO (x); + } + if (GET_CODE (x) == SUBREG) + { + int base = true_regnum (SUBREG_REG (x)); + if (base >= 0 && base < FIRST_PSEUDO_REGISTER) + return SUBREG_WORD (x) + base; + } + return -1; +} + +/* Optimize code of the form: + + for (x = a[i]; x; ...) + ... + for (x = a[i]; x; ...) + ... + foo: + + Loop optimize will change the above code into + + if (x = a[i]) + for (;;) + { ...; if (! (x = ...)) break; } + if (x = a[i]) + for (;;) + { ...; if (! (x = ...)) break; } + foo: + + In general, if the first test fails, the program can branch + directly to `foo' and skip the second try which is doomed to fail. + We run this after loop optimization and before flow analysis. */ + +/* When comparing the insn patterns, we track the fact that different + pseudo-register numbers may have been used in each computation. + The following array stores an equivalence -- same_regs[I] == J means + that pseudo register I was used in the first set of tests in a context + where J was used in the second set. We also count the number of such + pending equivalences. If nonzero, the expressions really aren't the + same. */ + +static int *same_regs; + +static int num_same_regs; + +/* Track any registers modified between the target of the first jump and + the second jump. They never compare equal. */ + +static char *modified_regs; + +/* Record if memory was modified. */ + +static int modified_mem; + +/* Called via note_stores on each insn between the target of the first + branch and the second branch. It marks any changed registers. */ + +static void +mark_modified_reg (dest, x) + rtx dest; + rtx x ATTRIBUTE_UNUSED; +{ + int regno, i; + + if (GET_CODE (dest) == SUBREG) + dest = SUBREG_REG (dest); + + if (GET_CODE (dest) == MEM) + modified_mem = 1; + + if (GET_CODE (dest) != REG) + return; + + regno = REGNO (dest); + if (regno >= FIRST_PSEUDO_REGISTER) + modified_regs[regno] = 1; + else + for (i = 0; i < HARD_REGNO_NREGS (regno, GET_MODE (dest)); i++) + modified_regs[regno + i] = 1; +} + +/* F is the first insn in the chain of insns. */ + +void +thread_jumps (f, max_reg, flag_before_loop) + rtx f; + int max_reg; + int flag_before_loop; +{ + /* Basic algorithm is to find a conditional branch, + the label it may branch to, and the branch after + that label. If the two branches test the same condition, + walk back from both branch paths until the insn patterns + differ, or code labels are hit. If we make it back to + the target of the first branch, then we know that the first branch + will either always succeed or always fail depending on the relative + senses of the two branches. So adjust the first branch accordingly + in this case. */ + + rtx label, b1, b2, t1, t2; + enum rtx_code code1, code2; + rtx b1op0, b1op1, b2op0, b2op1; + int changed = 1; + int i; + int *all_reset; + + /* Allocate register tables and quick-reset table. */ + modified_regs = (char *) alloca (max_reg * sizeof (char)); + same_regs = (int *) alloca (max_reg * sizeof (int)); + all_reset = (int *) alloca (max_reg * sizeof (int)); + for (i = 0; i < max_reg; i++) + all_reset[i] = -1; + + while (changed) + { + changed = 0; + + for (b1 = f; b1; b1 = NEXT_INSN (b1)) + { + /* Get to a candidate branch insn. */ + if (GET_CODE (b1) != JUMP_INSN + || ! condjump_p (b1) || simplejump_p (b1) + || JUMP_LABEL (b1) == 0) + continue; + + bzero (modified_regs, max_reg * sizeof (char)); + modified_mem = 0; + + bcopy ((char *) all_reset, (char *) same_regs, + max_reg * sizeof (int)); + num_same_regs = 0; + + label = JUMP_LABEL (b1); + + /* Look for a branch after the target. Record any registers and + memory modified between the target and the branch. Stop when we + get to a label since we can't know what was changed there. */ + for (b2 = NEXT_INSN (label); b2; b2 = NEXT_INSN (b2)) + { + if (GET_CODE (b2) == CODE_LABEL) + break; + + else if (GET_CODE (b2) == JUMP_INSN) + { + /* If this is an unconditional jump and is the only use of + its target label, we can follow it. */ + if (simplejump_p (b2) + && JUMP_LABEL (b2) != 0 + && LABEL_NUSES (JUMP_LABEL (b2)) == 1) + { + b2 = JUMP_LABEL (b2); + continue; + } + else + break; + } + + if (GET_CODE (b2) != CALL_INSN && GET_CODE (b2) != INSN) + continue; + + if (GET_CODE (b2) == CALL_INSN) + { + modified_mem = 1; + for (i = 0; i < FIRST_PSEUDO_REGISTER; i++) + if (call_used_regs[i] && ! fixed_regs[i] + && i != STACK_POINTER_REGNUM + && i != FRAME_POINTER_REGNUM + && i != HARD_FRAME_POINTER_REGNUM + && i != ARG_POINTER_REGNUM) + modified_regs[i] = 1; + } + + note_stores (PATTERN (b2), mark_modified_reg); + } + + /* Check the next candidate branch insn from the label + of the first. */ + if (b2 == 0 + || GET_CODE (b2) != JUMP_INSN + || b2 == b1 + || ! condjump_p (b2) + || simplejump_p (b2)) + continue; + + /* Get the comparison codes and operands, reversing the + codes if appropriate. If we don't have comparison codes, + we can't do anything. */ + b1op0 = XEXP (XEXP (SET_SRC (PATTERN (b1)), 0), 0); + b1op1 = XEXP (XEXP (SET_SRC (PATTERN (b1)), 0), 1); + code1 = GET_CODE (XEXP (SET_SRC (PATTERN (b1)), 0)); + if (XEXP (SET_SRC (PATTERN (b1)), 1) == pc_rtx) + code1 = reverse_condition (code1); + + b2op0 = XEXP (XEXP (SET_SRC (PATTERN (b2)), 0), 0); + b2op1 = XEXP (XEXP (SET_SRC (PATTERN (b2)), 0), 1); + code2 = GET_CODE (XEXP (SET_SRC (PATTERN (b2)), 0)); + if (XEXP (SET_SRC (PATTERN (b2)), 1) == pc_rtx) + code2 = reverse_condition (code2); + + /* If they test the same things and knowing that B1 branches + tells us whether or not B2 branches, check if we + can thread the branch. */ + if (rtx_equal_for_thread_p (b1op0, b2op0, b2) + && rtx_equal_for_thread_p (b1op1, b2op1, b2) + && (comparison_dominates_p (code1, code2) + || (comparison_dominates_p (code1, reverse_condition (code2)) + && can_reverse_comparison_p (XEXP (SET_SRC (PATTERN (b1)), + 0), + b1)))) + { + t1 = prev_nonnote_insn (b1); + t2 = prev_nonnote_insn (b2); + + while (t1 != 0 && t2 != 0) + { + if (t2 == label) + { + /* We have reached the target of the first branch. + If there are no pending register equivalents, + we know that this branch will either always + succeed (if the senses of the two branches are + the same) or always fail (if not). */ + rtx new_label; + + if (num_same_regs != 0) + break; + + if (comparison_dominates_p (code1, code2)) + new_label = JUMP_LABEL (b2); + else + new_label = get_label_after (b2); + + if (JUMP_LABEL (b1) != new_label) + { + rtx prev = PREV_INSN (new_label); + + if (flag_before_loop + && GET_CODE (prev) == NOTE + && NOTE_LINE_NUMBER (prev) == NOTE_INSN_LOOP_BEG) + { + /* Don't thread to the loop label. If a loop + label is reused, loop optimization will + be disabled for that loop. */ + new_label = gen_label_rtx (); + emit_label_after (new_label, PREV_INSN (prev)); + } + changed |= redirect_jump (b1, new_label); + } + break; + } + + /* If either of these is not a normal insn (it might be + a JUMP_INSN, CALL_INSN, or CODE_LABEL) we fail. (NOTEs + have already been skipped above.) Similarly, fail + if the insns are different. */ + if (GET_CODE (t1) != INSN || GET_CODE (t2) != INSN + || recog_memoized (t1) != recog_memoized (t2) + || ! rtx_equal_for_thread_p (PATTERN (t1), + PATTERN (t2), t2)) + break; + + t1 = prev_nonnote_insn (t1); + t2 = prev_nonnote_insn (t2); + } + } + } + } +} + +/* This is like RTX_EQUAL_P except that it knows about our handling of + possibly equivalent registers and knows to consider volatile and + modified objects as not equal. + + YINSN is the insn containing Y. */ + +int +rtx_equal_for_thread_p (x, y, yinsn) + rtx x, y; + rtx yinsn; +{ + register int i; + register int j; + register enum rtx_code code; + register char *fmt; + + code = GET_CODE (x); + /* Rtx's of different codes cannot be equal. */ + if (code != GET_CODE (y)) + return 0; + + /* (MULT:SI x y) and (MULT:HI x y) are NOT equivalent. + (REG:SI x) and (REG:HI x) are NOT equivalent. */ + + if (GET_MODE (x) != GET_MODE (y)) + return 0; + + /* For floating-point, consider everything unequal. This is a bit + pessimistic, but this pass would only rarely do anything for FP + anyway. */ + if (TARGET_FLOAT_FORMAT == IEEE_FLOAT_FORMAT + && FLOAT_MODE_P (GET_MODE (x)) && ! flag_fast_math) + return 0; + + /* For commutative operations, the RTX match if the operand match in any + order. Also handle the simple binary and unary cases without a loop. */ + if (code == EQ || code == NE || GET_RTX_CLASS (code) == 'c') + return ((rtx_equal_for_thread_p (XEXP (x, 0), XEXP (y, 0), yinsn) + && rtx_equal_for_thread_p (XEXP (x, 1), XEXP (y, 1), yinsn)) + || (rtx_equal_for_thread_p (XEXP (x, 0), XEXP (y, 1), yinsn) + && rtx_equal_for_thread_p (XEXP (x, 1), XEXP (y, 0), yinsn))); + else if (GET_RTX_CLASS (code) == '<' || GET_RTX_CLASS (code) == '2') + return (rtx_equal_for_thread_p (XEXP (x, 0), XEXP (y, 0), yinsn) + && rtx_equal_for_thread_p (XEXP (x, 1), XEXP (y, 1), yinsn)); + else if (GET_RTX_CLASS (code) == '1') + return rtx_equal_for_thread_p (XEXP (x, 0), XEXP (y, 0), yinsn); + + /* Handle special-cases first. */ + switch (code) + { + case REG: + if (REGNO (x) == REGNO (y) && ! modified_regs[REGNO (x)]) + return 1; + + /* If neither is user variable or hard register, check for possible + equivalence. */ + if (REG_USERVAR_P (x) || REG_USERVAR_P (y) + || REGNO (x) < FIRST_PSEUDO_REGISTER + || REGNO (y) < FIRST_PSEUDO_REGISTER) + return 0; + + if (same_regs[REGNO (x)] == -1) + { + same_regs[REGNO (x)] = REGNO (y); + num_same_regs++; + + /* If this is the first time we are seeing a register on the `Y' + side, see if it is the last use. If not, we can't thread the + jump, so mark it as not equivalent. */ + if (REGNO_LAST_UID (REGNO (y)) != INSN_UID (yinsn)) + return 0; + + return 1; + } + else + return (same_regs[REGNO (x)] == REGNO (y)); + + break; + + case MEM: + /* If memory modified or either volatile, not equivalent. + Else, check address. */ + if (modified_mem || MEM_VOLATILE_P (x) || MEM_VOLATILE_P (y)) + return 0; + + return rtx_equal_for_thread_p (XEXP (x, 0), XEXP (y, 0), yinsn); + + case ASM_INPUT: + if (MEM_VOLATILE_P (x) || MEM_VOLATILE_P (y)) + return 0; + + break; + + case SET: + /* Cancel a pending `same_regs' if setting equivalenced registers. + Then process source. */ + if (GET_CODE (SET_DEST (x)) == REG + && GET_CODE (SET_DEST (y)) == REG) + { + if (same_regs[REGNO (SET_DEST (x))] == REGNO (SET_DEST (y))) + { + same_regs[REGNO (SET_DEST (x))] = -1; + num_same_regs--; + } + else if (REGNO (SET_DEST (x)) != REGNO (SET_DEST (y))) + return 0; + } + else + if (rtx_equal_for_thread_p (SET_DEST (x), SET_DEST (y), yinsn) == 0) + return 0; + + return rtx_equal_for_thread_p (SET_SRC (x), SET_SRC (y), yinsn); + + case LABEL_REF: + return XEXP (x, 0) == XEXP (y, 0); + + case SYMBOL_REF: + return XSTR (x, 0) == XSTR (y, 0); + + default: + break; + } + + if (x == y) + return 1; + + fmt = GET_RTX_FORMAT (code); + for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--) + { + switch (fmt[i]) + { + case 'w': + if (XWINT (x, i) != XWINT (y, i)) + return 0; + break; + + case 'n': + case 'i': + if (XINT (x, i) != XINT (y, i)) + return 0; + break; + + case 'V': + case 'E': + /* Two vectors must have the same length. */ + if (XVECLEN (x, i) != XVECLEN (y, i)) + return 0; + + /* And the corresponding elements must match. */ + for (j = 0; j < XVECLEN (x, i); j++) + if (rtx_equal_for_thread_p (XVECEXP (x, i, j), + XVECEXP (y, i, j), yinsn) == 0) + return 0; + break; + + case 'e': + if (rtx_equal_for_thread_p (XEXP (x, i), XEXP (y, i), yinsn) == 0) + return 0; + break; + + case 'S': + case 's': + if (strcmp (XSTR (x, i), XSTR (y, i))) + return 0; + break; + + case 'u': + /* These are just backpointers, so they don't matter. */ + break; + + case '0': + break; + + /* It is believed that rtx's at this level will never + contain anything but integers and other rtx's, + except for within LABEL_REFs and SYMBOL_REFs. */ + default: + abort (); + } + } + return 1; +} + + +#ifndef HAVE_cc0 +/* Return the insn that NEW can be safely inserted in front of starting at + the jump insn INSN. Return 0 if it is not safe to do this jump + optimization. Note that NEW must contain a single set. */ + +static rtx +find_insert_position (insn, new) + rtx insn; + rtx new; +{ + int i; + rtx prev; + + /* If NEW does not clobber, it is safe to insert NEW before INSN. */ + if (GET_CODE (PATTERN (new)) != PARALLEL) + return insn; + + for (i = XVECLEN (PATTERN (new), 0) - 1; i >= 0; i--) + if (GET_CODE (XVECEXP (PATTERN (new), 0, i)) == CLOBBER + && reg_overlap_mentioned_p (XEXP (XVECEXP (PATTERN (new), 0, i), 0), + insn)) + break; + + if (i < 0) + return insn; + + /* There is a good chance that the previous insn PREV sets the thing + being clobbered (often the CC in a hard reg). If PREV does not + use what NEW sets, we can insert NEW before PREV. */ + + prev = prev_active_insn (insn); + for (i = XVECLEN (PATTERN (new), 0) - 1; i >= 0; i--) + if (GET_CODE (XVECEXP (PATTERN (new), 0, i)) == CLOBBER + && reg_overlap_mentioned_p (XEXP (XVECEXP (PATTERN (new), 0, i), 0), + insn) + && ! modified_in_p (XEXP (XVECEXP (PATTERN (new), 0, i), 0), + prev)) + return 0; + + return reg_mentioned_p (SET_DEST (single_set (new)), prev) ? 0 : prev; +} +#endif /* !HAVE_cc0 */ |