diff options
Diffstat (limited to 'gnu/usr.bin/binutils/gdb/config/pa')
| -rw-r--r-- | gnu/usr.bin/binutils/gdb/config/pa/hppaelf.mh | 7 | ||||
| -rw-r--r-- | gnu/usr.bin/binutils/gdb/config/pa/hppaelf.mt | 3 | ||||
| -rw-r--r-- | gnu/usr.bin/binutils/gdb/config/pa/nm-obsd.h | 135 | ||||
| -rw-r--r-- | gnu/usr.bin/binutils/gdb/config/pa/tm-hppaobsd.h | 49 | ||||
| -rw-r--r-- | gnu/usr.bin/binutils/gdb/config/pa/xm-hppaobsd.h | 33 |
5 files changed, 227 insertions, 0 deletions
diff --git a/gnu/usr.bin/binutils/gdb/config/pa/hppaelf.mh b/gnu/usr.bin/binutils/gdb/config/pa/hppaelf.mh new file mode 100644 index 00000000000..fd6bfb35e79 --- /dev/null +++ b/gnu/usr.bin/binutils/gdb/config/pa/hppaelf.mh @@ -0,0 +1,7 @@ +# Host: Hewlett-Packard PA-RISC machine, running BSD w/ elf +XDEPFILES= ser-tcp.o +XM_FILE= xm-hppab.h +NAT_FILE= nm-hppab.h +NATDEPFILES= hppab-nat.o corelow.o core-elf.o inftarg.o fork-child.o somread.o infptrace.o hpread.o somsolib.o + +GDBSERVER_DEPFILES= low-hppaelf.o diff --git a/gnu/usr.bin/binutils/gdb/config/pa/hppaelf.mt b/gnu/usr.bin/binutils/gdb/config/pa/hppaelf.mt new file mode 100644 index 00000000000..33b30cb1c65 --- /dev/null +++ b/gnu/usr.bin/binutils/gdb/config/pa/hppaelf.mt @@ -0,0 +1,3 @@ +# Target: HP PA-RISC running bsd +TDEPFILES= hppa-tdep.o remote-pa.o +TM_FILE= tm-hppab.h diff --git a/gnu/usr.bin/binutils/gdb/config/pa/nm-obsd.h b/gnu/usr.bin/binutils/gdb/config/pa/nm-obsd.h new file mode 100644 index 00000000000..b31ab5c9bb7 --- /dev/null +++ b/gnu/usr.bin/binutils/gdb/config/pa/nm-obsd.h @@ -0,0 +1,135 @@ +/* HP PA-RISC machine native support for BSD, for GDB. + Copyright 1991, 1992 Free Software Foundation, Inc. + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#include "somsolib.h" + +#define U_REGS_OFFSET 0 + +#define KERNEL_U_ADDR 0 + +/* What a coincidence! */ +#define REGISTER_U_ADDR(addr, blockend, regno) \ +{ addr = (int)(blockend) + REGISTER_BYTE (regno);} + +/* 3rd argument to ptrace is supposed to be a caddr_t. */ + +#define PTRACE_ARG3_TYPE caddr_t + +/* HPUX 8.0, in its infinite wisdom, has chosen to prototype ptrace + with five arguments, so programs written for normal ptrace lose. */ +#define FIVE_ARG_PTRACE + + +/* This macro defines the register numbers (from REGISTER_NAMES) that + are effectively unavailable to the user through ptrace(). It allows + us to include the whole register set in REGISTER_NAMES (inorder to + better support remote debugging). If it is used in + fetch/store_inferior_registers() gdb will not complain about I/O errors + on fetching these registers. If all registers in REGISTER_NAMES + are available, then return false (0). */ + +#define CANNOT_STORE_REGISTER(regno) \ + ((regno) == 0) || \ + ((regno) == PCSQ_HEAD_REGNUM) || \ + ((regno) >= PCSQ_TAIL_REGNUM && (regno) < IPSW_REGNUM) || \ + ((regno) > IPSW_REGNUM && (regno) < FP4_REGNUM) + +/* fetch_inferior_registers is in hppab-nat.c. */ +#define FETCH_INFERIOR_REGISTERS + +/* attach/detach works to some extent under BSD and HPUX. So long + as the process you're attaching to isn't blocked waiting on io, + blocked waiting on a signal, or in a system call things work + fine. (The problems in those cases are related to the fact that + the kernel can't provide complete register information for the + target process... Which really pisses off GDB.) */ + +#define ATTACH_DETACH + +/* The PA-BSD kernel has support for using the data memory break bit + to implement fast watchpoints. + + Watchpoints on the PA act much like traditional page protection + schemes, but with some notable differences. + + First, a special bit in the page table entry is used to cause + a trap when a specific page is written to. This avoids having + to overload watchpoints on the page protection bits. This makes + it possible for the kernel to easily decide if a trap was caused + by a watchpoint or by the user writing to protected memory and can + signal the user program differently in each case. + + Second, the PA has a bit in the processor status word which causes + data memory breakpoints (aka watchpoints) to be disabled for a single + instruction. This bit can be used to avoid the overhead of unprotecting + and reprotecting pages when it becomes necessary to step over a watchpoint. + + + When the kernel receives a trap indicating a write to a page which + is being watched, the kernel performs a couple of simple actions. First + is sets the magic "disable memory breakpoint" bit in the processor + status word, it then sends a SIGTRAP to the process which caused the + trap. + + GDB will take control and catch the signal for the inferior. GDB then + examines the PSW-X bit to determine if the SIGTRAP was caused by a + watchpoint firing. If so GDB single steps the inferior over the + instruction which caused the watchpoint to trigger (note because the + kernel disabled the data memory break bit for one instruction no trap + will be taken!). GDB will then determines the appropriate action to + take. (this may include restarting the inferior if the watchpoint + fired because of a write to an address on the same page as a watchpoint, + but no write to the watched address occured). */ + +#define TARGET_HAS_HARDWARE_WATCHPOINTS /* Enable the code in procfs.c */ + +/* The PA can watch any number of locations, there's no need for it to reject + anything (generic routines already check that all intermediates are + in memory). */ +#define TARGET_CAN_USE_HARDWARE_WATCHPOINT(type, cnt, ot) \ + ((type) == bp_hardware_watchpoint) + +/* When a hardware watchpoint fires off the PC will be left at the + instruction which caused the watchpoint. It will be necessary for + GDB to step over the watchpoint. + + On a PA running BSD, it is trivial to identify when it will be + necessary to step over a hardware watchpoint as we can examine + the PSW-X bit. If the bit is on, then we trapped because of a + watchpoint, else we trapped for some other reason. */ +#define STOPPED_BY_WATCHPOINT(W) \ + ((W).kind == TARGET_WAITKIND_STOPPED \ + && (W).value.sig == TARGET_SIGNAL_TRAP \ + && ((int) read_register (IPSW_REGNUM) & 0x00100000)) + +/* The PA can single step over a watchpoint if the kernel has set the + "X" bit in the processor status word (disable data memory breakpoint + for one instruction). + + The kernel will always set this bit before notifying the inferior + that it hit a watchpoint. Thus, the inferior can single step over + the instruction which caused the watchpoint to fire. This avoids + the traditional need to disable the watchpoint, step the inferior, + then enable the watchpoint again. */ +#define HAVE_STEPPABLE_WATCHPOINT + +/* Use these macros for watchpoint insertion/deletion. */ +/* type can be 0: write watch, 1: read watch, 2: access watch (read/write) */ +#define target_insert_watchpoint(addr, len, type) hppa_set_watchpoint (addr, len, 1) +#define target_remove_watchpoint(addr, len, type) hppa_set_watchpoint (addr, len, 0) diff --git a/gnu/usr.bin/binutils/gdb/config/pa/tm-hppaobsd.h b/gnu/usr.bin/binutils/gdb/config/pa/tm-hppaobsd.h new file mode 100644 index 00000000000..87697f48e5d --- /dev/null +++ b/gnu/usr.bin/binutils/gdb/config/pa/tm-hppaobsd.h @@ -0,0 +1,49 @@ +/* Parameters for execution on an HP PA-RISC machine running BSD, for GDB. + Contributed by the Center for Software Science at the + University of Utah (pa-gdb-bugs@cs.utah.edu). */ + +/* For BSD: + + The signal context structure pointer is always saved at the base + of the frame + 0x4. + + We get the PC & SP directly from the sigcontext structure itself. + For other registers we have to dive in a little deeper: + + The hardware save state pointer is at offset 0x10 within the + signal context structure. + + Within the hardware save state, registers are found in the same order + as the register numbers in GDB. */ + +#define FRAME_SAVED_PC_IN_SIGTRAMP(FRAME, TMP) \ +{ \ + *(TMP) = read_memory_integer ((FRAME)->frame + 0x4, 4); \ + *(TMP) = read_memory_integer (*(TMP) + 0x18, 4); \ +} + +#define FRAME_BASE_BEFORE_SIGTRAMP(FRAME, TMP) \ +{ \ + *(TMP) = read_memory_integer ((FRAME)->frame + 0x4, 4); \ + *(TMP) = read_memory_integer (*(TMP) + 0x8, 4); \ +} + +#define FRAME_FIND_SAVED_REGS_IN_SIGTRAMP(FRAME, FSR) \ +{ \ + int i; \ + CORE_ADDR TMP; \ + TMP = read_memory_integer ((FRAME)->frame + 0x4, 4); \ + TMP = read_memory_integer (TMP + 0x10, 4); \ + for (i = 0; i < NUM_REGS; i++) \ + { \ + if (i == SP_REGNUM) \ + (FSR)->regs[SP_REGNUM] = read_memory_integer (TMP + SP_REGNUM * 4, 4); \ + else \ + (FSR)->regs[i] = TMP + i * 4; \ + } \ +} + +/* It's mostly just the common stuff. */ +#include "pa/tm-hppa.h" + +#define GDB_TARGET_IS_PA_ELF diff --git a/gnu/usr.bin/binutils/gdb/config/pa/xm-hppaobsd.h b/gnu/usr.bin/binutils/gdb/config/pa/xm-hppaobsd.h new file mode 100644 index 00000000000..463c1e08dcb --- /dev/null +++ b/gnu/usr.bin/binutils/gdb/config/pa/xm-hppaobsd.h @@ -0,0 +1,33 @@ +/* Parameters for hosting on an HPPA PA-RISC machine, running BSD, for GDB. + Copyright 1991, 1992 Free Software Foundation, Inc. + + Contributed by the Center for Software Science at the + University of Utah (pa-gdb-bugs@cs.utah.edu). + +This file is part of GDB. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +/* This is a big-endian host. */ + +#define HOST_BYTE_ORDER BIG_ENDIAN + +#include "pa/xm-pa.h" + +#ifndef SEEK_SET +# define SEEK_SET 0 /* Set file pointer to "offset" */ +# define SEEK_CUR 1 /* Set file pointer to current plus "offset" */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif /* SEEK_SET */ |