diff options
Diffstat (limited to 'gnu/usr.bin/texinfo/info/info-stnd.texi')
| -rw-r--r-- | gnu/usr.bin/texinfo/info/info-stnd.texi | 1365 |
1 files changed, 0 insertions, 1365 deletions
diff --git a/gnu/usr.bin/texinfo/info/info-stnd.texi b/gnu/usr.bin/texinfo/info/info-stnd.texi deleted file mode 100644 index 0ff5fd7fb28..00000000000 --- a/gnu/usr.bin/texinfo/info/info-stnd.texi +++ /dev/null @@ -1,1365 +0,0 @@ -\input texinfo @c -*-texinfo-*- -@comment %**start of header -@setfilename info-stnd.info -@settitle GNU Info -@set InfoProgVer 2.11 -@paragraphindent none -@footnotestyle end -@synindex vr cp -@synindex fn cp -@synindex ky cp -@comment %**end of header -@comment $Id: info-stnd.texi,v 1.3 2002/06/10 13:51:03 espie Exp $ - -@dircategory Texinfo documentation system -@direntry -* info program: (info-stnd). Standalone Info-reading program. -@end direntry - -@ifinfo -This file documents GNU Info, a program for viewing the on-line formatted -versions of Texinfo files. This documentation is different from the -documentation for the Info reader that is part of GNU Emacs. If you do -not know how to use Info, but have a working Info reader, you should -read that documentation first. - -Copyright @copyright{} 1992, 93, 96 Free Software Foundation, Inc. - -Permission is granted to make and distribute verbatim copies of this -manual provided the copyright notice and this permission notice are -preserved on all copies. - -@ignore -Permission is granted to process this file through TeX and print the -results, provided the printed document carries a copying permission -notice identical to this one except for the removal of this paragraph -(this paragraph not being relevant to the printed manual). -@end ignore - -Permission is granted to copy and distribute modified versions of this -manual under the conditions for verbatim copying, provided also that the -sections entitled ``Copying'' and ``GNU General Public License'' are -included exactly as in the original, and provided that the entire -resulting derived work is distributed under the terms of a permission -notice identical to this one. - -Permission is granted to copy and distribute translations of this manual -into another language, under the above conditions for modified versions, -except that this permission notice may be stated in a translation -approved by the Free Software Foundation. -@end ifinfo - -@titlepage -@title GNU Info User's Guide -@subtitle For GNU Info version @value{InfoProgVer} -@author Brian J. Fox (bfox@@ai.mit.edu) -@page -@vskip 0pt plus 1filll -Copyright @copyright{} 1992, 1993 Free Software Foundation - -Permission is granted to make and distribute verbatim copies of this -manual provided the copyright notice and this permission notice are -preserved on all copies. - -Permission is granted to copy and distribute modified versions of this -manual under the conditions for verbatim copying, provided also that the -sections entitled ``Copying'' and ``GNU General Public License'' are -included exactly as in the original, and provided that the entire -resulting derived work is distributed under the terms of a permission -notice identical to this one. - -Permission is granted to copy and distribute translations of this manual -into another language, under the above conditions for modified versions, -except that this permission notice may be stated in a translation -approved by the Free Software Foundation. -@end titlepage - -@ifinfo -@node Top, What is Info, (dir), (dir) -@top The GNU Info Program - -This file documents GNU Info, a program for viewing the on-line -formatted versions of Texinfo files, version @value{InfoProgVer}. This -documentation is different from the documentation for the Info reader -that is part of GNU Emacs. -@end ifinfo - -@menu -* What is Info:: -* Options:: Options you can pass on the command line. -* Cursor Commands:: Commands which move the cursor within a node. -* Scrolling Commands:: Commands for moving the node around - in a window. -* Node Commands:: Commands for selecting a new node. -* Searching Commands:: Commands for searching an Info file. -* Xref Commands:: Commands for selecting cross references. -* Window Commands:: Commands which manipulate multiple windows. -* Printing Nodes:: How to print out the contents of a node. -* Miscellaneous Commands:: A few commands that defy categories. -* Variables:: How to change the default behavior of Info. -* GNU Info Global Index:: Global index containing keystrokes, - command names, variable names, - and general concepts. -@end menu - -@node What is Info, Options, Top, Top -@chapter What is Info? - -@iftex -This file documents GNU Info, a program for viewing the on-line formatted -versions of Texinfo files, version @value{InfoProgVer}. -@end iftex - -@dfn{Info} is a program which is used to view Info files on an ASCII -terminal. @dfn{Info files} are the result of processing Texinfo files -with the program @code{makeinfo} or with one of the Emacs commands, such -as @code{M-x texinfo-format-buffer}. Texinfo itself is a documentation -system that uses a single source file to produce both on-line -information and printed output. You can typeset and print the -files that you read in Info.@refill - -@node Options, Cursor Commands, What is Info, Top -@chapter Command Line Options -@cindex command line options -@cindex arguments, command line - -GNU Info accepts several options to control the initial node being -viewed, and to specify which directories to search for Info files. Here -is a template showing an invocation of GNU Info from the shell: - -@example -info [--@var{option-name} @var{option-value}] @var{menu-item}@dots{} -@end example - -The following @var{option-names} are available when invoking Info from -the shell: - -@table @code -@cindex directory path -@item --directory @var{directory-path} -@itemx -d @var{directory-path} -Add @var{directory-path} to the list of directory paths searched when -Info needs to find a file. You may issue @code{--directory} multiple -times; once for each directory which contains Info files. -Alternatively, you may specify a value for the environment variable -@code{INFOPATH}; if @code{--directory} is not given, the value of -@code{INFOPATH} is used. The value of @code{INFOPATH} is a colon -separated list of directory names. If you do not supply @code{INFOPATH} -or @code{--directory-path}, Info uses a default path. - -@item --file @var{filename} -@itemx -f @var{filename} -@cindex Info file, selecting -Specify a particular Info file to visit. By default, Info visits -the file @code{dir}; if you use this option, Info will start with -@code{(@var{filename})Top} as the first file and node. - -@item --node @var{nodename} -@itemx -n @var{nodename} -@cindex node, selecting -Specify a particular node to visit in the initial file that Info -loads. This is especially useful in conjunction with -@code{--file}@footnote{Of course, you can specify both the file and node -in a @code{--node} command; but don't forget to escape the open and -close parentheses from the shell as in: @code{info --node -"(emacs)Buffers"}}. You may specify @code{--node} multiple times; for -an interactive Info, each @var{nodename} is visited in its own window, -for a non-interactive Info (such as when @code{--output} is given) each -@var{nodename} is processed sequentially. - -@item --output @var{filename} -@itemx -o @var{filename} -@cindex file, outputting to -@cindex outputting to a file -Specify @var{filename} as the name of a file to which to direct output. -Each node that Info visits will be output to @var{filename} instead of -interactively viewed. A value of @code{-} for @var{filename} specifies -the standard output. - -@item --subnodes -@cindex @code{--subnodes}, command line option -This option only has meaning when given in conjunction with -@code{--output}. It means to recursively output the nodes appearing in -the menus of each node being output. Menu items which resolve to -external Info files are not output, and neither are menu items which are -members of an index. Each node is only output once. - -@item --help -@itemx -h -Produces a relatively brief description of the available Info options. - -@item --version -@cindex version information -Prints the version information of Info and exits. - -@item @var{menu-item} -@cindex menu, following -Info treats its remaining arguments as the names of menu items. The -first argument is a menu item in the initial node visited, while -the second argument is a menu item in the first argument's node. -You can easily move to the node of your choice by specifying the menu -names which describe the path to that node. For example, - -@example -info emacs buffers -@end example - -@noindent -first selects the menu item @samp{Emacs} in the node @samp{(dir)Top}, -and then selects the menu item @samp{Buffers} in the node -@samp{(emacs)Top}. -@end table - -@node Cursor Commands, Scrolling Commands, Options, Top -@chapter Moving the Cursor -@cindex cursor, moving - -Many people find that reading screens of text page by page is made -easier when one is able to indicate particular pieces of text with some -kind of pointing device. Since this is the case, GNU Info (both the -Emacs and standalone versions) have several commands which allow you to -move the cursor about the screen. The notation used in this manual to -describe keystrokes is identical to the notation used within the Emacs -manual, and the GNU Readline manual. @xref{Characters, , Character -Conventions, emacs, the GNU Emacs Manual}, if you are unfamiliar with the -notation. - -The following table lists the basic cursor movement commands in Info. -Each entry consists of the key sequence you should type to execute the -cursor movement, the @code{M-x}@footnote{@code{M-x} is also a command; it -invokes @code{execute-extended-command}. @xref{M-x, , Executing an -extended command, emacs, the GNU Emacs Manual}, for more detailed -information.} command name (displayed in parentheses), and a short -description of what the command does. All of the cursor motion commands -can take an @dfn{numeric} argument (@pxref{Miscellaneous Commands, -@code{universal-argument}}), to find out how to supply them. With a -numeric argument, the motion commands are simply executed that -many times; for example, a numeric argument of 4 given to -@code{next-line} causes the cursor to move down 4 lines. With a -negative numeric argument, the motion is reversed; an argument of -4 -given to the @code{next-line} command would cause the cursor to move -@emph{up} 4 lines. - -@table @asis -@item @code{C-n} (@code{next-line}) -@kindex C-n -@findex next-line -Move the cursor down to the next line. - -@item @code{C-p} (@code{prev-line}) -@kindex C-p -@findex prev-line -Move the cursor up to the previous line. - -@item @code{C-a} (@code{beginning-of-line}) -@kindex C-a, in Info windows -@findex beginning-of-line -Move the cursor to the start of the current line. - -@item @code{C-e} (@code{end-of-line}) -@kindex C-e, in Info windows -@findex end-of-line -Move the cursor to the end of the current line. - -@item @code{C-f} (@code{forward-char}) -@kindex C-f, in Info windows -@findex forward-char -Move the cursor forward a character. - -@item @code{C-b} (@code{backward-char}) -@kindex C-b, in Info windows -@findex backward-char -Move the cursor backward a character. - -@item @code{M-f} (@code{forward-word}) -@kindex M-f, in Info windows -@findex forward-word -Move the cursor forward a word. - -@item @code{M-b} (@code{backward-word}) -@kindex M-b, in Info windows -@findex backward-word -Move the cursor backward a word. - -@item @code{M-<} (@code{beginning-of-node}) -@itemx @code{b} -@kindex b, in Info windows -@kindex M-< -@findex beginning-of-node -Move the cursor to the start of the current node. - -@item @code{M->} (@code{end-of-node}) -@kindex M-> -@findex end-of-node -Move the cursor to the end of the current node. - -@item @code{M-r} (@code{move-to-window-line}) -@kindex M-r -@findex move-to-window-line -Move the cursor to a specific line of the window. Without a numeric -argument, @code{M-r} moves the cursor to the start of the line in the -center of the window. With a numeric argument of @var{n}, @code{M-r} -moves the cursor to the start of the @var{n}th line in the window. -@end table - -@node Scrolling Commands, Node Commands, Cursor Commands, Top -@chapter Moving Text Within a Window -@cindex scrolling - -Sometimes you are looking at a screenful of text, and only part of the -current paragraph you are reading is visible on the screen. The -commands detailed in this section are used to shift which part of the -current node is visible on the screen. - -@table @asis -@item @code{SPC} (@code{scroll-forward}) -@itemx @code{C-v} -@kindex SPC, in Info windows -@kindex C-v -@findex scroll-forward -Shift the text in this window up. That is, show more of the node which -is currently below the bottom of the window. With a numeric argument, -show that many more lines at the bottom of the window; a numeric -argument of 4 would shift all of the text in the window up 4 lines -(discarding the top 4 lines), and show you four new lines at the bottom -of the window. Without a numeric argument, @key{SPC} takes the bottom -two lines of the window and places them at the top of the window, -redisplaying almost a completely new screenful of lines. - -@item @code{DEL} (@code{scroll-backward}) -@itemx @code{M-v} -@kindex DEL, in Info windows -@kindex M-v -@findex scroll-backward -Shift the text in this window down. The inverse of -@code{scroll-forward}. -@end table - -@cindex scrolling through node structure -The @code{scroll-forward} and @code{scroll-backward} commands can also -move forward and backward through the node structure of the file. If -you press @key{SPC} while viewing the end of a node, or @key{DEL} while -viewing the beginning of a node, what happens is controlled by the -variable @code{scroll-behavior}. @xref{Variables, -@code{scroll-behavior}}, for more information. - -@table @asis -@item @code{C-l} (@code{redraw-display}) -@kindex C-l -@findex redraw-display -Redraw the display from scratch, or shift the line containing the cursor -to a specified location. With no numeric argument, @samp{C-l} clears -the screen, and then redraws its entire contents. Given a numeric -argument of @var{n}, the line containing the cursor is shifted so that -it is on the @var{n}th line of the window. - -@item @code{C-x w} (@code{toggle-wrap}) -@kindex C-w -@findex toggle-wrap -Toggles the state of line wrapping in the current window. Normally, -lines which are longer than the screen width @dfn{wrap}, i.e., they are -continued on the next line. Lines which wrap have a @samp{\} appearing -in the rightmost column of the screen. You can cause such lines to be -terminated at the rightmost column by changing the state of line -wrapping in the window with @code{C-x w}. When a line which needs more -space than one screen width to display is displayed, a @samp{$} appears -in the rightmost column of the screen, and the remainder of the line is -invisible. -@end table - -@node Node Commands, Searching Commands, Scrolling Commands, Top -@chapter Selecting a New Node -@cindex nodes, selection of - -This section details the numerous Info commands which select a new node -to view in the current window. - -The most basic node commands are @samp{n}, @samp{p}, @samp{u}, and -@samp{l}. - -When you are viewing a node, the top line of the node contains some Info -@dfn{pointers} which describe where the next, previous, and up nodes -are. Info uses this line to move about the node structure of the file -when you use the following commands: - -@table @asis -@item @code{n} (@code{next-node}) -@kindex n -@findex next-node -Select the `Next' node. - -@item @code{p} (@code{prev-node}) -@kindex p -@findex prev-node -Select the `Prev' node. - -@item @code{u} (@code{up-node}) -@kindex u -@findex up-node -Select the `Up' node. -@end table - -You can easily select a node that you have already viewed in this window -by using the @samp{l} command -- this name stands for "last", and -actually moves through the list of already visited nodes for this -window. @samp{l} with a negative numeric argument moves forward through -the history of nodes for this window, so you can quickly step between -two adjacent (in viewing history) nodes. - -@table @asis -@item @code{l} (@code{history-node}) -@kindex l -@findex history-node -Select the most recently selected node in this window. -@end table - -Two additional commands make it easy to select the most commonly -selected nodes; they are @samp{t} and @samp{d}. - -@table @asis -@item @code{t} (@code{top-node}) -@kindex t -@findex top-node -Select the node @samp{Top} in the current Info file. - -@item @code{d} (@code{dir-node}) -@kindex d -@findex dir-node -Select the directory node (i.e., the node @samp{(dir)}). -@end table - -Here are some other commands which immediately result in the selection -of a different node in the current window: - -@table @asis -@item @code{<} (@code{first-node}) -@kindex < -@findex first-node -Selects the first node which appears in this file. This node is most -often @samp{Top}, but it does not have to be. - -@item @code{>} (@code{last-node}) -@kindex > -@findex last-node -Select the last node which appears in this file. - -@item @code{]} (@code{global-next-node}) -@kindex ] -@findex global-next-node -Move forward or down through node structure. If the node that you are -currently viewing has a @samp{Next} pointer, that node is selected. -Otherwise, if this node has a menu, the first menu item is selected. If -there is no @samp{Next} and no menu, the same process is tried with the -@samp{Up} node of this node. - -@item @code{[} (@code{global-prev-node}) -@kindex [ -@findex global-prev-node -Move backward or up through node structure. If the node that you are -currently viewing has a @samp{Prev} pointer, that node is selected. -Otherwise, if the node has an @samp{Up} pointer, that node is selected, -and if it has a menu, the last item in the menu is selected. -@end table - -You can get the same behavior as @code{global-next-node} and -@code{global-prev-node} while simply scrolling through the file with -@key{SPC} and @key{DEL}; @xref{Variables, @code{scroll-behavior}}, for -more information. - -@table @asis -@item @code{g} (@code{goto-node}) -@kindex g -@findex goto-node -Read the name of a node and select it. No completion is done while -reading the node name, since the desired node may reside in a separate -file. The node must be typed exactly as it appears in the Info file. A -file name may be included as with any node specification, for example - -@example -@code{g(emacs)Buffers} -@end example - -finds the node @samp{Buffers} in the Info file @file{emacs}. - -@item @code{C-x k} (@code{kill-node}) -@kindex C-x k -@findex kill-node -Kill a node. The node name is prompted for in the echo area, with a -default of the current node. @dfn{Killing} a node means that Info tries -hard to forget about it, removing it from the list of history nodes kept -for the window where that node is found. Another node is selected in -the window which contained the killed node. - -@item @code{C-x C-f} (@code{view-file}) -@kindex C-x C-f -@findex view-file -Read the name of a file and selects the entire file. The command -@example -@code{C-x C-f @var{filename}} -@end example -is equivalent to typing -@example -@code{g(@var{filename})*} -@end example - -@item @code{C-x C-b} (@code{list-visited-nodes}) -@kindex C-x C-b -@findex list-visited-nodes -Make a window containing a menu of all of the currently visited nodes. -This window becomes the selected window, and you may use the standard -Info commands within it. - -@item @code{C-x b} (@code{select-visited-node}) -@kindex C-x b -@findex select-visited-node -Select a node which has been previously visited in a visible window. -This is similar to @samp{C-x C-b} followed by @samp{m}, but no window is -created. -@end table - -@node Searching Commands, Xref Commands, Node Commands, Top -@chapter Searching an Info File -@cindex searching - -GNU Info allows you to search for a sequence of characters throughout an -entire Info file, search through the indices of an Info file, or find -areas within an Info file which discuss a particular topic. - -@table @asis -@item @code{s} (@code{search}) -@kindex s -@findex search -Read a string in the echo area and search for it. - -@item @code{C-s} (@code{isearch-forward}) -@kindex C-s -@findex isearch-forward -Interactively search forward through the Info file for a string as you -type it. - -@item @code{C-r} (@code{isearch-backward}) -@kindex C-r -@findex isearch-backward -Interactively search backward through the Info file for a string as -you type it. - -@item @code{i} (@code{index-search}) -@kindex i -@findex index-search -Look up a string in the indices for this Info file, and select a node -where the found index entry points to. - -@item @code{,} (@code{next-index-match}) -@kindex , -@findex next-index-match -Move to the node containing the next matching index item from the last -@samp{i} command. -@end table - -The most basic searching command is @samp{s} (@code{search}). The -@samp{s} command prompts you for a string in the echo area, and then -searches the remainder of the Info file for an occurrence of that string. -If the string is found, the node containing it is selected, and the -cursor is left positioned at the start of the found string. Subsequent -@samp{s} commands show you the default search string within @samp{[} and -@samp{]}; pressing @key{RET} instead of typing a new string will use the -default search string. - -@dfn{Incremental searching} is similar to basic searching, but the -string is looked up while you are typing it, instead of waiting until -the entire search string has been specified. - -@node Xref Commands, Window Commands, Searching Commands, Top -@chapter Selecting Cross References - -We have already discussed the @samp{Next}, @samp{Prev}, and @samp{Up} -pointers which appear at the top of a node. In addition to these -pointers, a node may contain other pointers which refer you to a -different node, perhaps in another Info file. Such pointers are called -@dfn{cross references}, or @dfn{xrefs} for short. - -@menu -* Parts of an Xref:: What a cross reference is made of. -* Selecting Xrefs:: Commands for selecting menu or note items. -@end menu - -@node Parts of an Xref, Selecting Xrefs, , Xref Commands -@section Parts of an Xref - -Cross references have two major parts: the first part is called the -@dfn{label}; it is the name that you can use to refer to the cross -reference, and the second is the @dfn{target}; it is the full name of -the node that the cross reference points to. - -The target is separated from the label by a colon @samp{:}; first the -label appears, and then the target. For example, in the sample menu -cross reference below, the single colon separates the label from the -target. - -@example -* Foo Label: Foo Target. More information about Foo. -@end example - -Note the @samp{.} which ends the name of the target. The @samp{.} is -not part of the target; it serves only to let Info know where the target -name ends. - -A shorthand way of specifying references allows two adjacent colons to -stand for a target name which is the same as the label name: - -@example -* Foo Commands:: Commands pertaining to Foo. -@end example - -In the above example, the name of the target is the same as the name of -the label, in this case @code{Foo Commands}. - -You will normally see two types of cross reference while viewing nodes: -@dfn{menu} references, and @dfn{note} references. Menu references -appear within a node's menu; they begin with a @samp{*} at the beginning -of a line, and continue with a label, a target, and a comment which -describes what the contents of the node pointed to contains. - -Note references appear within the body of the node text; they begin with -@code{*Note}, and continue with a label and a target. - -Like @samp{Next}, @samp{Prev}, and @samp{Up} pointers, cross references -can point to any valid node. They are used to refer you to a place -where more detailed information can be found on a particular subject. -Here is a cross reference which points to a node within the Texinfo -documentation: @xref{xref, , Writing an Xref, texinfo, the Texinfo -Manual}, for more information on creating your own texinfo cross -references. - -@node Selecting Xrefs, , Parts of an Xref, Xref Commands -@section Selecting Xrefs - -The following table lists the Info commands which operate on menu items. - -@table @asis -@item @code{1} (@code{menu-digit}) -@itemx @code{2} @dots{} @code{9} -@cindex 1 @dots{} 9, in Info windows -@kindex 1 @dots{} 9, in Info windows -@findex menu-digit -Within an Info window, pressing a single digit, (such as @samp{1}), -selects that menu item, and places its node in the current window. -For convenience, there is one exception; pressing @samp{0} selects the -@emph{last} item in the node's menu. - -@item @code{0} (@code{last-menu-item}) -@kindex 0, in Info windows -@findex last-menu-item -Select the last item in the current node's menu. - -@item @code{m} (@code{menu-item}) -@kindex m -@findex menu-item -Reads the name of a menu item in the echo area and selects its node. -Completion is available while reading the menu label. - -@item @code{M-x find-menu} -@findex find-menu -Move the cursor to the start of this node's menu. -@end table - -This table lists the Info commands which operate on note cross references. - -@table @asis -@item @code{f} (@code{xref-item}) -@itemx @code{r} -@kindex f -@kindex r -@findex xref-item -Reads the name of a note cross reference in the echo area and selects -its node. Completion is available while reading the cross reference -label. -@end table - -Finally, the next few commands operate on menu or note references alike: - -@table @asis -@item @code{TAB} (@code{move-to-next-xref}) -@kindex TAB, in Info windows -@findex move-to-next-xref -Move the cursor to the start of the next nearest menu item or note -reference in this node. You can then use @key{RET} -(@code{select-reference-this-line}) to select the menu or note reference. - -@item @code{M-TAB} (@code{move-to-prev-xref}) -@kindex M-TAB, in Info windows -@findex move-to-prev-xref -Move the cursor the start of the nearest previous menu item or note -reference in this node. - -@item @code{RET} (@code{select-reference-this-line}) -@kindex RET, in Info windows -@findex select-reference-this-line -Select the menu item or note reference appearing on this line. -@end table - -@node Window Commands, Printing Nodes, Xref Commands, Top -@chapter Manipulating Multiple Windows -@cindex windows, manipulating - -A @dfn{window} is a place to show the text of a node. Windows have a -view area where the text of the node is displayed, and an associated -@dfn{mode line}, which briefly describes the node being viewed. - -GNU Info supports multiple windows appearing in a single screen; each -window is separated from the next by its modeline. At any time, there -is only one @dfn{active} window, that is, the window in which the cursor -appears. There are commands available for creating windows, changing -the size of windows, selecting which window is active, and for deleting -windows. - -@menu -* The Mode Line:: What appears in the mode line? -* Basic Windows:: Manipulating windows in Info. -* The Echo Area:: Used for displaying errors and reading input. -@end menu - -@node The Mode Line, Basic Windows, , Window Commands -@section The Mode Line - -A @dfn{mode line} is a line of inverse video which appears at the bottom -of an Info window. It describes the contents of the window just above -it; this information includes the name of the file and node appearing in -that window, the number of screen lines it takes to display the node, -and the percentage of text that is above the top of the window. It can -also tell you if the indirect tags table for this Info file needs to be -updated, and whether or not the Info file was compressed when stored on -disk. - -Here is a sample mode line for a window containing an uncompressed file -named @file{dir}, showing the node @samp{Top}. - -@example -@group ------Info: (dir)Top, 40 lines --Top--------------------------------------- - ^^ ^ ^^^ ^^ - (file)Node #lines where -@end group -@end example - -When a node comes from a file which is compressed on disk, this is -indicated in the mode line with two small @samp{z}'s. In addition, if -the Info file containing the node has been split into subfiles, the name -of the subfile containing the node appears in the modeline as well: - -@example ---zz-Info: (emacs)Top, 291 lines --Top-- Subfile: emacs-1.Z--------------- -@end example - -When Info makes a node internally, such that there is no corresponding -info file on disk, the name of the node is surrounded by asterisks -(@samp{*}). The name itself tells you what the contents of the window -are; the sample mode line below shows an internally constructed node -showing possible completions: - -@example ------Info: *Completions*, 7 lines --All----------------------------------- -@end example - -@node Basic Windows, The Echo Area, The Mode Line, Window Commands -@section Window Commands - -It can be convenient to view more than one node at a time. To allow -this, Info can display more than one @dfn{window}. Each window has its -own mode line (@pxref{The Mode Line}) and history of nodes viewed in that -window (@pxref{Node Commands, , @code{history-node}}). - -@table @asis -@item @code{C-x o} (@code{next-window}) -@cindex windows, selecting -@kindex C-x o -@findex next-window -Select the next window on the screen. Note that the echo area can only be -selected if it is already in use, and you have left it temporarily. -Normally, @samp{C-x o} simply moves the cursor into the next window on -the screen, or if you are already within the last window, into the first -window on the screen. Given a numeric argument, @samp{C-x o} moves over -that many windows. A negative argument causes @samp{C-x o} to select -the previous window on the screen. - -@item @code{M-x prev-window} -@findex prev-window -Select the previous window on the screen. This is identical to -@samp{C-x o} with a negative argument. - -@item @code{C-x 2} (@code{split-window}) -@cindex windows, creating -@kindex C-x 2 -@findex split-window -Split the current window into two windows, both showing the same node. -Each window is one half the size of the original window, and the cursor -remains in the original window. The variable @code{automatic-tiling} -can cause all of the windows on the screen to be resized for you -automatically, please @pxref{Variables, , automatic-tiling} for more -information. - -@item @code{C-x 0} (@code{delete-window}) -@cindex windows, deleting -@kindex C-x 0 -@findex delete-window -Delete the current window from the screen. If you have made too many -windows and your screen appears cluttered, this is the way to get rid of -some of them. - -@item @code{C-x 1} (@code{keep-one-window}) -@kindex C-x 1 -@findex keep-one-window -Delete all of the windows excepting the current one. - -@item @code{ESC C-v} (@code{scroll-other-window}) -@kindex ESC C-v, in Info windows -@findex scroll-other-window -Scroll the other window, in the same fashion that @samp{C-v} might -scroll the current window. Given a negative argument, scroll the -"other" window backward. - -@item @code{C-x ^} (@code{grow-window}) -@kindex C-x ^ -@findex grow-window -Grow (or shrink) the current window. Given a numeric argument, grow -the current window that many lines; with a negative numeric argument, -shrink the window instead. - -@item @code{C-x t} (@code{tile-windows}) -@cindex tiling -@kindex C-x t -@findex tile-windows -Divide the available screen space among all of the visible windows. -Each window is given an equal portion of the screen in which to display -its contents. The variable @code{automatic-tiling} can cause -@code{tile-windows} to be called when a window is created or deleted. -@xref{Variables, , @code{automatic-tiling}}. -@end table - -@node The Echo Area, , Basic Windows, Window Commands -@section The Echo Area -@cindex echo area - -The @dfn{echo area} is a one line window which appears at the bottom of -the screen. It is used to display informative or error messages, and to -read lines of input from you when that is necessary. Almost all of the -commands available in the echo area are identical to their Emacs -counterparts, so please refer to that documentation for greater depth of -discussion on the concepts of editing a line of text. The following -table briefly lists the commands that are available while input is being -read in the echo area: - -@table @asis -@item @code{C-f} (@code{echo-area-forward}) -@kindex C-f, in the echo area -@findex echo-area-forward -Move forward a character. - -@item @code{C-b} (@code{echo-area-backward}) -@kindex C-b, in the echo area -@findex echo-area-backward -Move backward a character. - -@item @code{C-a} (@code{echo-area-beg-of-line}) -@kindex C-a, in the echo area -@findex echo-area-beg-of-line -Move to the start of the input line. - -@item @code{C-e} (@code{echo-area-end-of-line}) -@kindex C-e, in the echo area -@findex echo-area-end-of-line -Move to the end of the input line. - -@item @code{M-f} (@code{echo-area-forward-word}) -@kindex M-f, in the echo area -@findex echo-area-forward-word -Move forward a word. - -@item @code{M-b} (@code{echo-area-backward-word}) -@kindex M-b, in the echo area -@findex echo-area-backward-word -Move backward a word. - -@item @code{C-d} (@code{echo-area-delete}) -@kindex C-d, in the echo area -@findex echo-area-delete -Delete the character under the cursor. - -@item @code{DEL} (@code{echo-area-rubout}) -@kindex DEL, in the echo area -@findex echo-area-rubout -Delete the character behind the cursor. - -@item @code{C-g} (@code{echo-area-abort}) -@kindex C-g, in the echo area -@findex echo-area-abort -Cancel or quit the current operation. If completion is being read, -@samp{C-g} discards the text of the input line which does not match any -completion. If the input line is empty, @samp{C-g} aborts the calling -function. - -@item @code{RET} (@code{echo-area-newline}) -@kindex RET, in the echo area -@findex echo-area-newline -Accept (or forces completion of) the current input line. - -@item @code{C-q} (@code{echo-area-quoted-insert}) -@kindex C-q, in the echo area -@findex echo-area-quoted-insert -Insert the next character verbatim. This is how you can insert control -characters into a search string, for example. - -@item @var{printing character} (@code{echo-area-insert}) -@kindex printing characters, in the echo area -@findex echo-area-insert -Insert the character. - -@item @code{M-TAB} (@code{echo-area-tab-insert}) -@kindex M-TAB, in the echo area -@findex echo-area-tab-insert -Insert a TAB character. - -@item @code{C-t} (@code{echo-area-transpose-chars}) -@kindex C-t, in the echo area -@findex echo-area-transpose-chars -Transpose the characters at the cursor. -@end table - -The next group of commands deal with @dfn{killing}, and @dfn{yanking} -text. For an in depth discussion of killing and yanking, -@pxref{Killing, , Killing and Deleting, emacs, the GNU Emacs Manual} - -@table @asis -@item @code{M-d} (@code{echo-area-kill-word}) -@kindex M-d, in the echo area -@findex echo-area-kill-word -Kill the word following the cursor. - -@item @code{M-DEL} (@code{echo-area-backward-kill-word}) -@kindex M-DEL, in the echo area -@findex echo-area-backward-kill-word -Kill the word preceding the cursor. - -@item @code{C-k} (@code{echo-area-kill-line}) -@kindex C-k, in the echo area -@findex echo-area-kill-line -Kill the text from the cursor to the end of the line. - -@item @code{C-x DEL} (@code{echo-area-backward-kill-line}) -@kindex C-x DEL, in the echo area -@findex echo-area-backward-kill-line -Kill the text from the cursor to the beginning of the line. - -@item @code{C-y} (@code{echo-area-yank}) -@kindex C-y, in the echo area -@findex echo-area-yank -Yank back the contents of the last kill. - -@item @code{M-y} (@code{echo-area-yank-pop}) -@kindex M-y, in the echo area -@findex echo-area-yank-pop -Yank back a previous kill, removing the last yanked text first. -@end table - -Sometimes when reading input in the echo area, the command that needed -input will only accept one of a list of several choices. The choices -represent the @dfn{possible completions}, and you must respond with one -of them. Since there are a limited number of responses you can make, -Info allows you to abbreviate what you type, only typing as much of the -response as is necessary to uniquely identify it. In addition, you can -request Info to fill in as much of the response as is possible; this -is called @dfn{completion}. - -The following commands are available when completing in the echo area: - -@table @asis -@item @code{TAB} (@code{echo-area-complete}) -@itemx @code{SPC} -@kindex TAB, in the echo area -@kindex SPC, in the echo area -@findex echo-area-complete -Insert as much of a completion as is possible. - -@item @code{?} (@code{echo-area-possible-completions}) -@kindex ?, in the echo area -@findex echo-area-possible-completions -Display a window containing a list of the possible completions of what -you have typed so far. For example, if the available choices are: - -@example -@group -bar -foliate -food -forget -@end group -@end example - -@noindent -and you have typed an @samp{f}, followed by @samp{?}, the possible -completions would contain: - -@example -@group -foliate -food -forget -@end group -@end example - -@noindent -i.e., all of the choices which begin with @samp{f}. Pressing @key{SPC} -or @key{TAB} would result in @samp{fo} appearing in the echo area, since -all of the choices which begin with @samp{f} continue with @samp{o}. -Now, typing @samp{l} followed by @samp{TAB} results in @samp{foliate} -appearing in the echo area, since that is the only choice which begins -with @samp{fol}. - -@item @code{ESC C-v} (@code{echo-area-scroll-completions-window}) -@kindex ESC C-v, in the echo area -@findex echo-area-scroll-completions-window -Scroll the completions window, if that is visible, or the "other" -window if not. -@end table - -@node Printing Nodes, Miscellaneous Commands, Window Commands, Top -@chapter Printing Out Nodes -@cindex printing - -You may wish to print out the contents of a node as a quick reference -document for later use. Info provides you with a command for doing -this. In general, we recommend that you use @TeX{} to format the -document and print sections of it, by running @code{tex} on the Texinfo -source file. - -@table @asis -@item @code{M-x print-node} -@findex print-node -@cindex INFO_PRINT_COMMAND, environment variable -Pipe the contents of the current node through the command in the -environment variable @code{INFO_PRINT_COMMAND}. If the variable does not -exist, the node is simply piped to @code{lpr}. -@end table - -@node Miscellaneous Commands, Variables, Printing Nodes, Top -@chapter Miscellaneous Commands - -GNU Info contains several commands which self-document GNU Info: - -@table @asis -@item @code{M-x describe-command} -@cindex functions, describing -@cindex commands, describing -@findex describe-command -Read the name of an Info command in the echo area and then display a -brief description of what that command does. - -@item @code{M-x describe-key} -@cindex keys, describing -@findex describe-key -Read a key sequence in the echo area, and then display the name and -documentation of the Info command that the key sequence invokes. - -@item @code{M-x describe-variable} -Read the name of a variable in the echo area and then display a brief -description of what the variable affects. - -@item @code{M-x where-is} -@findex where-is -Read the name of an Info command in the echo area, and then display -a key sequence which can be typed in order to invoke that command. - -@item @code{C-h} (@code{get-help-window}) -@itemx @code{?} -@kindex C-h -@kindex ?, in Info windows -@findex get-help-window -Create (or Move into) the window displaying @code{*Help*}, and place -a node containing a quick reference card into it. This window displays -the most concise information about GNU Info available. - -@item @code{h} (@code{get-info-help-node}) -@kindex h -@findex get-info-help-node -Try hard to visit the node @code{(info)Help}. The Info file -@file{info.texi} distributed with GNU Info contains this node. Of -course, the file must first be processed with @code{makeinfo}, and then -placed into the location of your Info directory. -@end table - -Here are the commands for creating a numeric argument: - -@table @asis -@item @code{C-u} (@code{universal-argument}) -@cindex numeric arguments -@kindex C-u -@findex universal-argument -Start (or multiply by 4) the current numeric argument. @samp{C-u} is -a good way to give a small numeric argument to cursor movement or -scrolling commands; @samp{C-u C-v} scrolls the screen 4 lines, while -@samp{C-u C-u C-n} moves the cursor down 16 lines. - -@item @code{M-1} (@code{add-digit-to-numeric-arg}) -@itemx @code{M-2} @dots{} @code{M-9} -@kindex M-1 @dots{} M-9 -@findex add-digit-to-numeric-arg -Add the digit value of the invoking key to the current numeric -argument. Once Info is reading a numeric argument, you may just type -the digits of the argument, without the Meta prefix. For example, you -might give @samp{C-l} a numeric argument of 32 by typing: - -@example -@kbd{C-u 3 2 C-l} -@end example - -@noindent -or - -@example -@kbd{M-3 2 C-l} -@end example -@end table - -@samp{C-g} is used to abort the reading of a multi-character key -sequence, to cancel lengthy operations (such as multi-file searches) and -to cancel reading input in the echo area. - -@table @asis -@item @code{C-g} (@code{abort-key}) -@cindex cancelling typeahead -@cindex cancelling the current operation -@kindex C-g, in Info windows -@findex abort-key -Cancel current operation. -@end table - -The @samp{q} command of Info simply quits running Info. - -@table @asis -@item @code{q} (@code{quit}) -@cindex quitting -@kindex q -@findex quit -Exit GNU Info. -@end table - -If the operating system tells GNU Info that the screen is 60 lines tall, -and it is actually only 40 lines tall, here is a way to tell Info that -the operating system is correct. - -@table @asis -@item @code{M-x set-screen-height} -@findex set-screen-height -@cindex screen, changing the height of -Read a height value in the echo area and set the height of the -displayed screen to that value. -@end table - -Finally, Info provides a convenient way to display footnotes which might -be associated with the current node that you are viewing: - -@table @asis -@item @code{ESC C-f} (@code{show-footnotes}) -@kindex ESC C-f -@findex show-footnotes -@cindex footnotes, displaying -Show the footnotes (if any) associated with the current node in another -window. You can have Info automatically display the footnotes -associated with a node when the node is selected by setting the variable -@code{automatic-footnotes}. @xref{Variables, , @code{automatic-footnotes}}. -@end table - -@node Variables, GNU Info Global Index, Miscellaneous Commands, Top -@chapter Manipulating Variables - -GNU Info contains several @dfn{variables} whose values are looked at by -various Info commands. You can change the values of these variables, -and thus change the behavior of Info to more closely match your -environment and Info file reading manner. - -@table @asis -@item @code{M-x set-variable} -@cindex variables, setting -@findex set-variable -Read the name of a variable, and the value for it, in the echo area and -then set the variable to that value. Completion is available when -reading the variable name; often, completion is available when reading -the value to give to the variable, but that depends on the variable -itself. If a variable does @emph{not} supply multiple choices to -complete over, it expects a numeric value. - -@item @code{M-x describe-variable} -@cindex variables, describing -@findex describe-variable -Read the name of a variable in the echo area and then display a brief -description of what the variable affects. -@end table - -Here is a list of the variables that you can set in Info. - -@table @code -@item automatic-footnotes -@vindex automatic-footnotes -When set to @code{On}, footnotes appear and disappear automatically. -This variable is @code{On} by default. When a node is selected, a -window containing the footnotes which appear in that node is created, -and the footnotes are displayed within the new window. The window that -Info creates to contain the footnotes is called @samp{*Footnotes*}. If -a node is selected which contains no footnotes, and a @samp{*Footnotes*} -window is on the screen, the @samp{*Footnotes*} window is deleted. -Footnote windows created in this fashion are not automatically tiled so -that they can use as little of the display as is possible. - -@item automatic-tiling -@vindex automatic-tiling -When set to @code{On}, creating or deleting a window resizes other -windows. This variable is @code{Off} by default. Normally, typing -@samp{C-x 2} divides the current window into two equal parts. When -@code{automatic-tiling} is set to @code{On}, all of the windows are -resized automatically, keeping an equal number of lines visible in each -window. There are exceptions to the automatic tiling; specifically, the -windows @samp{*Completions*} and @samp{*Footnotes*} are @emph{not} -resized through automatic tiling; they remain their original size. - -@item visible-bell -@vindex visible-bell -When set to @code{On}, GNU Info attempts to flash the screen instead of -ringing the bell. This variable is @code{Off} by default. Of course, -Info can only flash the screen if the terminal allows it; in the case -that the terminal does not allow it, the setting of this variable has no -effect. However, you can make Info perform quietly by setting the -@code{errors-ring-bell} variable to @code{Off}. - -@item errors-ring-bell -@vindex errors-ring-bell -When set to @code{On}, errors cause the bell to ring. The default -setting of this variable is @code{On}. - -@item gc-compressed-files -@vindex gc-compressed-files -When set to @code{On}, Info garbage collects files which had to be -uncompressed. The default value of this variable is @code{Off}. -Whenever a node is visited in Info, the Info file containing that node -is read into core, and Info reads information about the tags and nodes -contained in that file. Once the tags information is read by Info, it -is never forgotten. However, the actual text of the nodes does not need -to remain in core unless a particular Info window needs it. For -non-compressed files, the text of the nodes does not remain in core when -it is no longer in use. But de-compressing a file can be a time -consuming operation, and so Info tries hard not to do it twice. -@code{gc-compressed-files} tells Info it is okay to garbage collect the -text of the nodes of a file which was compressed on disk. - -@item show-index-match -@vindex show-index-match -When set to @code{On}, the portion of the matched search string is -highlighted in the message which explains where the matched search -string was found. The default value of this variable is @code{On}. -When Info displays the location where an index match was found, -(@pxref{Searching Commands, , @code{next-index-match}}), the portion of the -string that you had typed is highlighted by displaying it in the inverse -case from its surrounding characters. - -@item scroll-behavior -@vindex scroll-behavior -Control what happens when forward scrolling is requested at the end of -a node, or when backward scrolling is requested at the beginning of a -node. The default value for this variable is @code{Continuous}. There -are three possible values for this variable: - -@table @code -@item Continuous -Try to get the first item in this node's menu, or failing that, the -@samp{Next} node, or failing that, the @samp{Next} of the @samp{Up}. -This behavior is identical to using the @samp{]} -(@code{global-next-node}) and @samp{[} (@code{global-prev-node}) -commands. - -@item Next Only -Only try to get the @samp{Next} node. - -@item Page Only -Simply give up, changing nothing. If @code{scroll-behavior} is -@code{Page Only}, no scrolling command can change the node that is being -viewed. -@end table - -@item scroll-step -@vindex scroll-step -The number of lines to scroll when the cursor moves out of the window. -Scrolling happens automatically if the cursor has moved out of the -visible portion of the node text when it is time to display. Usually -the scrolling is done so as to put the cursor on the center line of the -current window. However, if the variable @code{scroll-step} has a -nonzero value, Info attempts to scroll the node text by that many lines; -if that is enough to bring the cursor back into the window, that is what -is done. The default value of this variable is 0, thus placing the -cursor (and the text it is attached to) in the center of the window. -Setting this variable to 1 causes a kind of "smooth scrolling" which -some people prefer. - -@item ISO-Latin -@cindex ISO Latin characters -@vindex ISO-Latin -When set to @code{On}, Info accepts and displays ISO Latin characters. -By default, Info assumes an ASCII character set. @code{ISO-Latin} tells -Info that it is running in an environment where the European standard -character set is in use, and allows you to input such characters to -Info, as well as display them. -@end table - - - -@c the following is incomplete -@ignore -@c node Info for Sys Admins -@c chapter Info for System Administrators - -This text describes some common ways of setting up an Info hierarchy -from scratch, and details the various options that are available when -installing Info. This text is designed for the person who is installing -GNU Info on the system; although users may find the information present -in this section interesting, none of it is vital to understanding how to -use GNU Info. - -@menu -* Setting the INFOPATH:: Where are my Info files kept? -* Editing the DIR node:: What goes in `DIR', and why? -* Storing Info files:: Alternate formats allow flexibility in setups. -* Using `localdir':: Building DIR on the fly. -* Example setups:: Some common ways to organize Info files. -@end menu - -@c node Setting the INFOPATH -@c section Setting the INFOPATH - -Where are my Info files kept? - -@c node Editing the DIR node -@c section Editing the DIR node - -What goes in `DIR', and why? - -@c node Storing Info files -@c section Storing Info files - -Alternate formats allow flexibility in setups. - -@c node Using `localdir' -@c section Using `localdir' - -Building DIR on the fly. - -@c node Example setups -@c section Example setups - -Some common ways to organize Info files. -@end ignore - -@node GNU Info Global Index, , Variables, Top -@appendix Global Index - -@printindex cp - -@contents -@bye |