15 files changed, 113 insertions, 121 deletions
diff --git a/sbin/disklabel/disklabel.8 b/sbin/disklabel/disklabel.8
index 88de346bd54..c4cb020c543 100644
--- a/sbin/disklabel/disklabel.8
+++ b/sbin/disklabel/disklabel.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: disklabel.8,v 1.30 1999/05/23 14:11:14 aaron Exp $
+.\"	$OpenBSD: disklabel.8,v 1.31 1999/07/04 18:59:38 aaron Exp $
 .\"	$NetBSD: disklabel.8,v 1.9 1995/03/18 14:54:38 cgd Exp $
 .\"
 .\" Copyright (c) 1987, 1988, 1991, 1993
@@ -81,7 +81,7 @@
 .Op Fl n
 .Op Fl v
 .Ar disk
-.sp
+.Pp
 .Nm disklabel
 .Fl B
 .Op Fl n
@@ -241,7 +241,9 @@ With the
 flag,
 .Nm
 is capable of restoring a disk label that was formatted
-in a prior operation and saved in an ASCII file.
+in a prior operation and saved in an
+.Tn ASCII
+file.
 The prototype file used to create the label should be in the same format
 as that produced when reading or editing a label.
 Comments are delimited by
@@ -268,22 +270,27 @@ will drop you into a simple initial label editor.  This mode is
 only intended for new disks as it will move partitions around as
 necessary to maintain a contiguous pool of free blocks.  Some commands
 or prompts take an optional unit.  Available units are
-.Dq b
+.Sq b
 for bytes,
-.Dq c
+.Sq c
 for cylinders,
-.Dq k
+.Sq k
 for kilobytes,
-.Dq m
+.Sq m
 for megabytes,
 and
-.Dq g
+.Sq g
 for gigabytes.  Quantities will be rounded to the nearest
 cylinder when units are specified for sizes (or offsets).  Commands
-may be aborted by entering ^D (Control-D).  Entering ^D at the main
-.Dq \&>
+may be aborted by entering
+.Ql ^D
+(Control-D).
+Entering
+.Ql ^D
+at the main
+.Ql >
 prompt will exit the editor.  At prompts that request a size,
-.Dq \&*
+.Ql *
 may be entered to indicate the rest of the available space.
 The editor commands are as follows:
 .Bl -tag -width "p [unit] "
@@ -314,7 +321,7 @@ Set OpenBSD disk boundaries.  This option tells
 which parts of the disk it is allowed to modify.  This option is
 probably only useful for ports with fdisk partition tables where the
 ending sector in the MBR is incorrect.  The user may enter
-.Dq \&*
+.Ql *
 at the
 .Dq Size
 prompt to indicate the entire size of the disk (minus
@@ -332,16 +339,16 @@ one.
 Change the size of an existing partition.  If no partition is
 specified, the user will be prompted for one.  The new size may be
 in terms of the aforementioned units and may also be prefixed with
-.Dq +
+.Ql +
 or
-.Dq -
+.Ql -
 to change the size by a relative amount.
 .It d Op part
 Delete an existing partition (or
-.Dq *
+.Ql *
 to delete all partitions).  If no partition is specified, the
 user will be prompted for one.  You may not delete the
-.Dq c
+.Ql c
 partition.
 .It g Op d|b|u
 Set disk geometry based on what the
@@ -370,7 +377,9 @@ was invoked with the
 .Fl f
 flag.
 .It s Op path
-Save the label to a file in ASCII format (suitable for loading via
+Save the label to a file in
+.Tn ASCII
+format (suitable for loading via
 the
 .Fl R
 option).  If no path is specified, the user will be prompted for
@@ -519,12 +528,12 @@ to be decreased or the offset of a partition to be changed while
 it is open.  Some device drivers create a label containing only a
 single large partition if a disk is unlabeled; thus, the label must
 be written to the
-.Dq a
+.Sq a
 partition of the disk while it is open.
 This sometimes requires the desired label to be set in two steps,
 the first one creating at least one other partition, and the second
 setting the label on the new partition while shrinking the
-.Dq a
+.Sq a
 partition.
 .Pp
 On some machines the bootstrap code may not fit entirely in the
@@ -534,11 +543,19 @@ not be possible to have filesystems on some partitions of a
 disk.  When installing bootstrap code,
 .Nm
 checks for these cases.  If the installed boot code would overlap
-a partition of type FS_UNUSED it is marked as type FS_BOOT.  The
+a partition of type
+.Dv FS_UNUSED
+it is marked as type
+.Dv FS_BOOT .
+The
 .Xr newfs 8
-utility will disallow creation of filesystems on FS_BOOT partitions.
-Conversely, if a partition has a type other than FS_UNUSED or
-FS_BOOT,
+utility will disallow creation of filesystems on
+.Dv FS_BOOT
+partitions.
+Conversely, if a partition has a type other than
+.Dv FS_UNUSED
+or
+.Dv FS_BOOT ,
 .Nm
 will not install bootstrap code that overlaps it.
 .Sh NOTES
@@ -553,9 +570,9 @@ but this usage is deprecated.
 .Sh BUGS
 When a disk name is given without a full pathname, the constructed
 device name uses the
-.Dq a
+.Sq a
 partition on the tahoe, the
-.Dq c
+.Sq c
 partition on all others.  In
 .Fl E
 mode,
diff --git a/sbin/dump/dump.8 b/sbin/dump/dump.8
index b81eeebe769..d6173981d8f 100644
--- a/sbin/dump/dump.8
+++ b/sbin/dump/dump.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: dump.8,v 1.19 1999/06/04 02:45:15 aaron Exp $
+.\"	$OpenBSD: dump.8,v 1.20 1999/07/04 18:59:38 aaron Exp $
 .\"	$NetBSD: dump.8,v 1.17 1997/06/05 11:15:06 lukem Exp $
 .\"
 .\" Copyright (c) 1980, 1991, 1993
@@ -55,7 +55,6 @@
 .Nm dump
 .Op Fl W Li \&| Fl w
 .Pp
-.in -\\n(iSu
 (The
 .Bx 4.3
 option syntax is implemented for backward compatibility but
diff --git a/sbin/fdisk/fdisk.8 b/sbin/fdisk/fdisk.8
index 958a744928e..81460f557c1 100644
--- a/sbin/fdisk/fdisk.8
+++ b/sbin/fdisk/fdisk.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: fdisk.8,v 1.25 1999/07/03 02:11:07 aaron Exp $
+.\"	$OpenBSD: fdisk.8,v 1.26 1999/07/04 18:59:39 aaron Exp $
 .\"
 .\" Copyright (c) 1997 Tobias Weingartner
 .\" All rights reserved.
@@ -111,7 +111,7 @@ Number of partition table entry.  A
 denotes the bootable partition.
 .It Em "id"
 System identifier.
-.oS
+.Os
 reserves the
 magic number 166 decimal (A6 in hex).
 If no 166 partition is found, it will use an older FreeBSD partition
@@ -141,7 +141,7 @@ will completely overwrite the primary MBR, and start with a fresh one using
 a default template, or one given by the
 .Fl f
 flag.  It will set up partition number 3 to be an
-.oS
+.Os
 partition, that will start at cylinder 0, head 1, sector 1, and extend
 to the end of the disk.
 This mode is designed to initialize an MBR the very first time,
@@ -241,7 +241,7 @@ that use geometry translation under a potentially different BIOS.
 .Pp
 If you hand craft your disk layout,
 please make sure that the
-.oS
+.Os
 partition starts on a cylinder boundary.
 (This restriction may be changed in the future.)
 .Pp
diff --git a/sbin/fsdb/fsdb.8 b/sbin/fsdb/fsdb.8
index c861ec5d8d5..4eab50b5057 100644
--- a/sbin/fsdb/fsdb.8
+++ b/sbin/fsdb/fsdb.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: fsdb.8,v 1.11 1999/06/04 02:45:16 aaron Exp $
+.\"	$OpenBSD: fsdb.8,v 1.12 1999/07/04 18:59:39 aaron Exp $
 .\"	$NetBSD: fsdb.8,v 1.5 1997/01/11 05:51:40 lukem Exp $
 .\"
 .\" Copyright (c) 1996 The NetBSD Foundation, Inc.
@@ -100,7 +100,7 @@ may be a multi-component name or may begin with slash to indicate that
 the root inode should be used to start the lookup.  If some component
 along the pathname is not found, the last valid directory encountered is
 left as the active inode.
-.br
+.Pp
 This command is valid only if the starting inode is a directory.
 .Pp
 .It Cm active
@@ -234,7 +234,7 @@ to implement most of the file system manipulation code.  The remainder of
 first appeared in
 .Nx 1.1 .
 .Sh WARNING
-Use this tool with extreme caution--you can damage an FFS file system
+Use this tool with extreme caution \(en you can damage an FFS file system
 beyond what
 .Xr fsck 8
 can repair.
diff --git a/sbin/fsirand/fsirand.8 b/sbin/fsirand/fsirand.8
index 67cbf773d21..af2fdb710ec 100644
--- a/sbin/fsirand/fsirand.8
+++ b/sbin/fsirand/fsirand.8
@@ -23,7 +23,7 @@
 .\" OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 .\" ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.\"	$OpenBSD: fsirand.8,v 1.16 1999/05/28 22:59:58 aaron Exp $
+.\"	$OpenBSD: fsirand.8,v 1.17 1999/07/04 18:59:39 aaron Exp $
 .\"
 .Dd January 25, 1997
 .Dt FSIRAND 8
@@ -99,12 +99,9 @@ of memory for large disks with few cylinder groups.
 The
 .Nm
 command appeared in SunOS 3.x.
-.br
 This version of
 .Nm
 first appeared in
 .Ox 2.1 .
 .Sh AUTHOR
-.nf
 Todd C. Miller <Todd.Miller@courtesan.com>
-.fi
diff --git a/sbin/ifconfig/ifconfig.8 b/sbin/ifconfig/ifconfig.8
index 0b6ede74b09..002b020cc90 100644
--- a/sbin/ifconfig/ifconfig.8
+++ b/sbin/ifconfig/ifconfig.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: ifconfig.8,v 1.26 1999/07/03 02:11:07 aaron Exp $
+.\"	$OpenBSD: ifconfig.8,v 1.27 1999/07/04 18:59:39 aaron Exp $
 .\"	$NetBSD: ifconfig.8,v 1.11 1996/01/04 21:27:29 pk Exp $
 .\"     $FreeBSD: ifconfig.8,v 1.16 1998/02/01 07:03:29 steve Exp $
 .\"
@@ -167,7 +167,6 @@ Enable driver dependent debugging code; usually, this turns on
 extra console error logging.
 .It Fl debug
 Disable driver dependent debugging code.
-.ne 1i
 .It Cm delete
 Remove the network address specified.
 This would be used if you incorrectly specified an alias, or it
@@ -318,7 +317,6 @@ they are in general used to select special modes of operation. An example
 of this is to enable SLIP compression, or to select the connector type
 for some Ethernet cards.  Refer to the man page for the specific driver
 for more information.
-.ne 1i
 .It Fl link[0-2]
 Disable special processing at the link level with the specified interface.
 .It Cm up
diff --git a/sbin/init/init.8 b/sbin/init/init.8
index 21ea2b88991..7728bd06ba1 100644
--- a/sbin/init/init.8
+++ b/sbin/init/init.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: init.8,v 1.18 1999/06/04 02:45:17 aaron Exp $
+.\"	$OpenBSD: init.8,v 1.19 1999/07/04 18:59:40 aaron Exp $
 .\"	$NetBSD: init.8,v 1.6 1995/03/18 14:56:31 cgd Exp $
 .\"
 .\" Copyright (c) 1980, 1991, 1993
@@ -165,7 +165,6 @@ then restarted by
 executing a new
 .Xr getty
 for the line.
-.pl +1
 .Pp
 Line status (on, off, secure, getty, or window information)
 may be changed in the
diff --git a/sbin/ipsecadm/ipsecadm.8 b/sbin/ipsecadm/ipsecadm.8
index ed0461ef4bc..6641bd48577 100644
--- a/sbin/ipsecadm/ipsecadm.8
+++ b/sbin/ipsecadm/ipsecadm.8
@@ -1,4 +1,4 @@
-.\" $OpenBSD: ipsecadm.8,v 1.7 1999/06/04 02:45:24 aaron Exp $
+.\" $OpenBSD: ipsecadm.8,v 1.8 1999/07/04 18:59:41 aaron Exp $
 .\" Copyright 1997 Niels Provos <provos@physnet.uni-hamburg.de>
 .\" All rights reserved.
 .\"
@@ -141,7 +141,7 @@ Association. Allowed modifiers are:
 .Fl transport ,
 .Fl sport ,
 .Fl dport ,
-.FL local ,
+.Fl local ,
 .Fl delete .
 The
 .Xr netstat 1
@@ -264,7 +264,7 @@ should be chosen in random (ideally, using some true-random source like
 coin flipping). It is very important that the key is not guessable. One
 practical way of generating keys is by using the
 .Xr random 4
-device (e.g. dd if=/dev/urandom bs=1024 count=1 | sha1)
+device (e.g., dd if=/dev/urandom bs=1024 count=1 | sha1)
 .It authkey
 The secret key material used for authentication
 if additional authentication in new esp mode is required. For
@@ -278,7 +278,7 @@ should be chosen in random (ideally, using some true-random source like
 coin flipping). It is very important that the key is not guessable. One
 practical way of generating keys is by using the
 .Xr random 4
-device (e.g. dd if=/dev/urandom bs=1024 count=1 | sha1)
+device (e.g., dd if=/dev/urandom bs=1024 count=1 | sha1)
 .It iv
 This option has been deprecated. The argument is ignored. When applicable,
 it has the same behaviour as the
diff --git a/sbin/mount_lfs/mount_lfs.8 b/sbin/mount_lfs/mount_lfs.8
index 2eaf37ac184..45993efc1c8 100644
--- a/sbin/mount_lfs/mount_lfs.8
+++ b/sbin/mount_lfs/mount_lfs.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: mount_lfs.8,v 1.8 1999/07/02 20:11:47 aaron Exp $
+.\"	$OpenBSD: mount_lfs.8,v 1.9 1999/07/04 18:59:40 aaron Exp $
 .\"	$NetBSD: mount_lfs.8,v 1.2 1995/03/18 14:57:30 cgd Exp $
 .\"
 .\" Copyright (c) 1993, 1994
@@ -89,7 +89,7 @@ to read data in small chunks when cleaning the file system.
 .Xr fstab 5 ,
 .Xr lfs_cleanerd 8 ,
 .Xr mount 8
-.sp
+.Pp
 .Rs
 .%A Ousterhout and Douglis
 .%D 1989
diff --git a/sbin/mount_null/mount_null.8 b/sbin/mount_null/mount_null.8
index 63f31d15f7c..af3a5a4ac6f 100644
--- a/sbin/mount_null/mount_null.8
+++ b/sbin/mount_null/mount_null.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: mount_null.8,v 1.9 1999/06/04 02:45:18 aaron Exp $
+.\"	$OpenBSD: mount_null.8,v 1.10 1999/07/04 18:59:40 aaron Exp $
 .\"	$NetBSD: mount_null.8,v 1.4 1996/04/10 20:57:19 thorpej Exp $
 .\"
 .\" Copyright (c) 1992, 1993, 1994
@@ -211,7 +211,7 @@ is that vnodes arguments must be manually mapped.
 .\"
 .Sh SEE ALSO
 .Xr mount 8
-.sp
+.Pp
 UCLA Technical Report CSD-910056,
 .Em "Stackable Layers: an Architecture for File System Development" .
 .Sh HISTORY
diff --git a/sbin/newfs_msdos/newfs_msdos.8 b/sbin/newfs_msdos/newfs_msdos.8
index e8645b680a8..53e8919184b 100644
--- a/sbin/newfs_msdos/newfs_msdos.8
+++ b/sbin/newfs_msdos/newfs_msdos.8
@@ -1,4 +1,4 @@
-.\" $OpenBSD: newfs_msdos.8,v 1.10 1999/06/04 02:45:19 aaron Exp $
+.\" $OpenBSD: newfs_msdos.8,v 1.11 1999/07/04 18:59:41 aaron Exp $
 .\"
 .\" Copyright (c) 1995, 1996 Joerg Wunsch
 .\"
@@ -128,9 +128,6 @@ utility.
 .Sh HISTORY
 .Nm
 appeared in
-.Em FreeBSD 2.2 .
+.Fx 2.2 .
 .Sh AUTHOR
-The program has been contributed by
-.if n Joerg Wunsch,
-.if t J\(:org Wunsch,
-Dresden.
+The program has been contributed by Joerg Wunsch, Dresden.
diff --git a/sbin/reboot/boot_pmax.8 b/sbin/reboot/boot_pmax.8
index c201646bed1..4737d9cbd4f 100644
--- a/sbin/reboot/boot_pmax.8
+++ b/sbin/reboot/boot_pmax.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: boot_pmax.8,v 1.12 1999/06/04 02:45:23 aaron Exp $
+.\"	$OpenBSD: boot_pmax.8,v 1.13 1999/07/04 18:59:41 aaron Exp $
 .\"	$NetBSD: boot_pmax.8,v 1.1 1995/04/25 23:55:11 mellon Exp $
 .\"
 .\" Copyright (c) 1990, 1991 The Regents of the University of California.
@@ -99,11 +99,8 @@ must be specified.  Generally, the kernel is named
 An example
 .Nm bootpath
 setting would be:
-.nf
-.sp 1
-.ce 1
-setenv bootpath rz(0,1,0)bsd
-.fi
+.Pp
+.Dl setenv bootpath rz(0,1,0)bsd
 .Pp
 For automatic boots, the ROM automatically passes a
 .Fl a
@@ -139,9 +136,8 @@ with the
 .Fl f
 flag, followed by the path of the kernel to boot, as described above.
 For example:
-.sp 1
-.ce 1
-boot -f rz(0,4,0)bsd.new
+.Pp
+.Dl boot -f rz(0,4,0)bsd.new
 .Pp
 On TurboChannel machines (all DECstation 5000 models), the bootpath
 is specified in the
@@ -153,11 +149,8 @@ when setting the
 .Nm boot
 environment variable, the filename and arguments
 must be enclosed in quotes.  For example:
-.nf
-.sp 1
-.ce 1
-setenv boot "3/rz4/bsd -a"
-.fi
+.Pp
+.Dl setenv boot "3/rz4/bsd -a"
 .Pp
 The device from which to boot is specified as the TurboChannel slot
 number, a TurboChannel-option-specific device name, and a path to the
@@ -193,9 +186,8 @@ If no
 environment variable is set, or if an alternate kernel is to be
 booted, the path of that kernel may be specified after the boot command as
 described above, and any arguments may be passed similarly.  For example:
-.sp 1
-.ce 1
-boot 3/rz4/bsd.new -a
+.Pp
+.Dl boot 3/rz4/bsd.new -a
 .Sh SEE ALSO
 .Xr crash 8 ,
 .Xr fsck 8 ,
diff --git a/sbin/restore/restore.8 b/sbin/restore/restore.8
index 59db570da51..308b0c4fbae 100644
--- a/sbin/restore/restore.8
+++ b/sbin/restore/restore.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: restore.8,v 1.15 1999/06/04 02:45:23 aaron Exp $
+.\"	$OpenBSD: restore.8,v 1.16 1999/07/04 18:59:41 aaron Exp $
 .\"	$NetBSD: restore.8,v 1.15 1997/07/01 05:37:53 lukem Exp $
 .\"
 .\" Copyright (c) 1985, 1991, 1993
@@ -74,7 +74,6 @@
 .Op Fl s Ar fileno
 .Op Ar file Ar ...
 .Pp
-.in -\\n(iSu
 (The
 .Bx 4.3
 option syntax is implemented for backward compatibility but
@@ -241,7 +240,6 @@ Note that the
 flag replaces the function of the old
 .Xr dumpdir 8
 program.
-.ne 1i
 .It Fl x
 The named files are read from the given media.
 If a named file matches a directory whose contents
diff --git a/sbin/routed/rtquery/rtquery.8 b/sbin/routed/rtquery/rtquery.8
index b5b688d4d18..b30b9db4bc0 100644
--- a/sbin/routed/rtquery/rtquery.8
+++ b/sbin/routed/rtquery/rtquery.8
@@ -11,44 +11,46 @@
 .Op Fl r Ar addr
 .Ar host ...
 .Sh DESCRIPTION
-.Nm Rtquery
+.Nm
 is used to query a network routing daemon,
 .Xr routed 8
 or
 .Xr gated 8 ,
 for its routing table by sending a
-.Em request
+.Cm request
 or
-.Em poll
+.Cm poll
 command.  The routing information in any routing
-.Em response
+.Dq response
 packets returned is displayed numerically and symbolically.
 .Pp
-.Em Rtquery
+.Nm
 by default uses the
-.Em request
+.Cm request
 command.
 When the
 .Fl p
 option is specified,
-.Nm rtquery
+.Nm
 uses the
-.Em poll
+.Cm poll
 command, an
 undocumented extension to the RIP protocol supported by
 .Xr gated 8 .
 When querying gated, the
-.Em poll
+.Cm poll
 command is preferred over the
-.Em Request
+.Cm request
 command because the response is not subject to Split Horizon and/or
 Poisoned Reverse, and because some versions of gated do not answer
 the Request command.  Routed does not answer the Poll command, but
-recognizes Requests coming from rtquery and so answers completely.
+recognizes Requests coming from
+.Nm
+and so answers completely.
 .Pp
-.Em Rtquery
+.Nm
 is also used to turn tracing on or off in
-.Em routed .
+.Xr routed 8 .
 .Pp
 Options supported by
 .Nm rtquery :
@@ -61,43 +63,42 @@ The
 option displays only the numeric network and host numbers.
 .It Fl p
 Uses the
-.Em Poll
+.Cm poll
 command to request full routing information from
 .Xr gated 8 .
 This is an undocumented extension RIP protocol supported only by
 .Xr gated 8 .
 .It Fl 1
-query using RIP version 1 instead of RIP version 2.
+Query using RIP version 1 instead of RIP version 2.
 .It Fl w Ar timeout
-changes the delay for an answer from each host.
+Changes the delay for an answer from each host.
 By default, each host is given 15 seconds to respond.
 .It Fl r Ar addr
-ask about the route to destination
-.Em addr .
+Ask about the route to destination
+.Ar addr .
 .It Fl t Ar op
-change tracing, where
-.Em op
+Change tracing, where
+.Ar op
 is one of the following.
 Requests from processes not running with UID 0 or on distant networks
 are generally ignored by the daemon except for a message in the system log.
 .El
 .Bl -tag -width Ds -offset indent-two
 .It Em on=tracefile
-turn tracing on into the specified file.  That file must usually
+Turn tracing on into the specified file.  That file must usually
 have been specified when the daemon was started or be the same
 as a fixed name, often
 .Pa /etc/routed.trace .
 .It Em more
-increases the debugging level.
+Increases the debugging level.
 .It Em off
-turns off tracing.
+Turns off tracing.
 .It Em dump
-dumps the daemon's routing table to the current tracefile.
+Dumps the daemon's routing table to the current tracefile.
 .El
 .Sh SEE ALSO
 .Xr gated 8 ,
 .Xr routed 8
-.br
-RFC\ 1058 - Routing Information Protocol, RIPv1
-.br
-RFC\ 1723 - Routing Information Protocol, RIPv2
+.Pp
+.Dl RFC\ 1058 - Routing Information Protocol, RIPv1
+.Dl RFC\ 1723 - Routing Information Protocol, RIPv2
diff --git a/sbin/scsi/scsi.8 b/sbin/scsi/scsi.8
index d19bc88ea8b..4ca016404f8 100644
--- a/sbin/scsi/scsi.8
+++ b/sbin/scsi/scsi.8
@@ -1,4 +1,4 @@
-.\"	$OpenBSD: scsi.8,v 1.11 1999/07/03 02:11:08 aaron Exp $
+.\"	$OpenBSD: scsi.8,v 1.12 1999/07/04 18:59:42 aaron Exp $
 .\"	$FreeBSD: scsi.8,v 1.5 1995/05/05 20:41:58 dufault Exp $
 .\"
 .\" Written By Julian ELischer
@@ -79,26 +79,20 @@
 .Fl o Ar count out_fmt
 .Op Ar arg ...
 .Fl i Ar count in_fmt
-.Pp
-.in -\\n(iSu
+.Sh DESCRIPTION
+The
+.Nm
+program is used to send commands to a SCSI device. It is also
+a sample usage of the user-level SCSI commands.
 .Ar out_fmt
 can be
-.Sq -
+.Ql -
 to read output data from stdin;
 .Ar in_fmt
 can be
-.Sq -
+.Ql -
 to write input data to stdout.
 .Pp
-If debugging is not compiled in the kernel,
-.Fl d
-will have no effect.
-.Sh DESCRIPTION
-The
-.Nm
-program is used to send commands to a SCSI device. It is also
-a sample usage of the user-level SCSI commands.
-.Pp
 The following options are available:
 .Bl -tag -width Ds
 .It Fl d Ar debug_level
@@ -205,7 +199,7 @@ bytes of data. The data out is built up using the facilities described in
 using the provided arguments to fill in any integer variables.
 .Ar out_fmt
 can be specified as a hyphen
-.Pq Sq -
+.Pq Ql -
 to indicate that the
 .Ar count
 bytes of data should be read from the standard input.
@@ -221,7 +215,7 @@ using the facilities described in
 and displayed on the standard output.
 .Ar in_fmt
 can be specified as a hyphen
-.Pq Sq -
+.Pq Ql -
 to indicate that the
 .Ar count
 bytes of data input should be written to the standard output.