diff options
Diffstat (limited to 'share/man/man4')
| -rw-r--r-- | share/man/man4/Makefile | 4 | ||||
| -rw-r--r-- | share/man/man4/al.4 | 157 | ||||
| -rw-r--r-- | share/man/man4/ax.4 | 159 |
3 files changed, 2 insertions, 318 deletions
diff --git a/share/man/man4/Makefile b/share/man/man4/Makefile index 4f9690cb3b3..6b117848be4 100644 --- a/share/man/man4/Makefile +++ b/share/man/man4/Makefile @@ -1,7 +1,7 @@ -# $OpenBSD: Makefile,v 1.103 2000/03/29 00:27:05 aaron Exp $ +# $OpenBSD: Makefile,v 1.104 2000/03/29 00:28:41 aaron Exp $ # $NetBSD: Makefile,v 1.22.4.2 1996/07/18 00:51:10 jtc Exp $ -MAN= ac97.4 atalk.4 atapiscsi.4 audio.4 adv.4 ahc.4 al.4 ax.4 aue.4 bpf.4 \ +MAN= ac97.4 atalk.4 atapiscsi.4 audio.4 adv.4 ahc.4 aue.4 bpf.4 \ bridge.4 ccd.4 cd.4 ch.4 clnp.4 cltp.4 cnw.4 cue.4 dc.4 ddb.4 de.4 \ dpt.4 drum.4 eap.4 ec.4 ef.4 enc.4 ep.4 esis.4 eso.4 ess.4 exphy.4 \ fd.4 ffs_softupdates.4 fpa.4 fxp.4 gdt.4 gre.4 hifn.4 icmp.4 icsphy.4 \ diff --git a/share/man/man4/al.4 b/share/man/man4/al.4 deleted file mode 100644 index d8098ada09f..00000000000 --- a/share/man/man4/al.4 +++ /dev/null @@ -1,157 +0,0 @@ -.\" $OpenBSD: al.4,v 1.4 2000/02/23 18:08:55 aaron Exp $ -.\" Copyright (c) 1997, 1998, 1999 -.\" Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. Redistributions in binary form must reproduce the above copyright -.\" notice, this list of conditions and the following disclaimer in the -.\" documentation and/or other materials provided with the distribution. -.\" 3. All advertising materials mentioning features or use of this software -.\" must display the following acknowledgement: -.\" This product includes software developed by Bill Paul. -.\" 4. Neither the name of the author nor the names of any co-contributors -.\" may be used to endorse or promote products derived from this software -.\" without specific prior written permission. -.\" -.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND -.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD -.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF -.\" THE POSSIBILITY OF SUCH DAMAGE. -.\" -.\" $FreeBSD: src/share/man/man4/man4.i386/al.4,v 1.5 1999/09/22 05:07:51 wpaul Exp $ -.\" -.Dd May 20, 1999 -.Dt AL 4 i386 -.Os -.Sh NAME -.Nm al -.Nd -ADMtek AL981 Comet and AN985 Centaur Fast Ethernet driver -.Sh SYNOPSIS -.Cd "al* at pci? dev ? function ?" -.Sh DESCRIPTION -The -.Nm -driver provides support for PCI Ethernet adapters and embedded -controllers based on the ADMtek Inc. AL981 Comet and AN 985 -Centaur Fast Ethernet controller chips. -.Pp -The ADMtek chip uses bus master DMA and is designed to be a -DEC 21x4x workalike. The only major difference between the DEC -and ADMtek parts is that the ADMtek receiver filter is programmed -using two special registers where as the DEC chip is programmed -by uploading a special setup frame via the transmit DMA engine. -The AL981 and AN985 can only be programmed with a single -perfect filter entry for the local station address and a 64-bit -multicast hash table; the DEC filter supports several other -options. The ADMtek Fast Ethernet controllers support both -10 and 100Mbps speeds in either full or half duplex using -an internal MII transceiver. -.Pp -The -.Nm -driver supports the following media types: -.Pp -.Bl -tag -width xxxxxxxxxxxxxxxxxxxx -.It autoselect -Enable autoselection of the media type and options. -The user can manually override -the autoselected mode by adding media options to the -.Xr hostname.if 5 -file. -.It 10baseT/UTP -Set 10Mbps operation. The -.Ar mediaopt -option can also be used to select either -.Ar full-duplex -or -.Ar half-duplex modes. -.It 100baseTX -Set 100Mbps (Fast Ethernet) operation. The -.Ar mediaopt -option can also be used to select either -.Ar full-duplex -or -.Ar half-duplex -modes. -.El -.Pp -The -.Nm -driver supports the following media options: -.Pp -.Bl -tag -width xxxxxxxxxxxxxxxxxxxx -.It full-duplex -Force full-duplex operation. -.It half-duplex -Force half-duplex operation. -.El -.Pp -For more information on configuring this device, see -.Xr ifconfig 8 . -.Sh DIAGNOSTICS -.Bl -diag -.It "ax%d: couldn't map memory" -A fatal initialization error has occurred. -.It "ax%d: couldn't map interrupt" -A fatal initialization error has occurred. -.It "ax%d: watchdog timeout" -The device has stopped responding to the network, or there is a problem with -the network connection (cable). -.It "ax%d: no memory for rx list" -The driver failed to allocate an mbuf for the receiver ring. -.It "ax%d: no memory for tx list" -The driver failed to allocate an mbuf for the transmitter ring when -allocating a pad buffer or collapsing an mbuf chain into a cluster. -.It "ax%d: chip is in D3 power state -- setting to D0" -This message applies only to adapters which support power -management. Some operating systems place the controller in low power -mode when shutting down, and some PCI BIOSes fail to bring the chip -out of this state before configuring it. The controller loses all of -its PCI configuration in the D3 state, so if the BIOS does not set -it back to full power mode in time, it won't be able to configure it -correctly. The driver tries to detect this condition and bring -the adapter back to the D0 (full power) state, but this may not be -enough to return the driver to a fully operational condition. If -you see this message at boot time and the driver fails to attach -the device as a network interface, you will have to perform second -warm boot to have the device properly configured. -.Pp -Note that this condition only occurs when warm booting from another -operating system. If you power down your system prior to booting -.Ox , -the card should be configured correctly. -.El -.Sh SEE ALSO -.Xr arp 4 , -.Xr netintro 4 , -.Xr ifconfig 8 -.Rs -.%T ADMtek AL981 data sheet -.%O http://www.admtek.com.tw -.Re -.Sh HISTORY -The -.Nm -device driver first appeared in -.Fx 3.0 . -.Ox -support was added in -.Ox 2.7 . -.Sh AUTHORS -The -.Nm -driver was written by Bill Paul <wpaul@ctr.columbia.edu> and ported to -.Ox -by Aaron Campbell <aaron@openbsd.org>. diff --git a/share/man/man4/ax.4 b/share/man/man4/ax.4 deleted file mode 100644 index 0c011394159..00000000000 --- a/share/man/man4/ax.4 +++ /dev/null @@ -1,159 +0,0 @@ -.\" $OpenBSD: ax.4,v 1.4 2000/02/23 18:08:55 aaron Exp $ -.\" Copyright (c) 1997, 1998, 1999 -.\" Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. -.\" -.\" Redistribution and use in source and binary forms, with or without -.\" modification, are permitted provided that the following conditions -.\" are met: -.\" 1. Redistributions of source code must retain the above copyright -.\" notice, this list of conditions and the following disclaimer. -.\" 2. Redistributions in binary form must reproduce the above copyright -.\" notice, this list of conditions and the following disclaimer in the -.\" documentation and/or other materials provided with the distribution. -.\" 3. All advertising materials mentioning features or use of this software -.\" must display the following acknowledgement: -.\" This product includes software developed by Bill Paul. -.\" 4. Neither the name of the author nor the names of any co-contributors -.\" may be used to endorse or promote products derived from this software -.\" without specific prior written permission. -.\" -.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND -.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE -.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD -.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR -.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF -.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS -.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN -.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) -.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF -.\" THE POSSIBILITY OF SUCH DAMAGE. -.\" -.\" $Id: ax.4,v 1.4 2000/02/23 18:08:55 aaron Exp $ -.\" -.Dd August 14, 1999 -.Dt AX 4 i386 -.Os -.Sh NAME -.Nm ax -.Nd -ASIX Electronics AX88140A and AX88141 Fast Ethernet device driver -.Sh SYNOPSIS -.Cd "ax* at pci? dev ? function ?" -.Sh DESCRIPTION -The -.Nm -driver provides support for PCI Ethernet adapters and embedded -controllers based on the ASIX AX88140A and AX88141 Fast Ethernet -controller chips, including the Alfa Inc. GFC2204 and the CNet Pro110. -The AX88141 is a new version of the AX88140A with power management -and magic packet support. -.Pp -The ASIX chip uses bus master DMA and is designed to be a -DEC 21x4x workalike. The only major difference between the DEC -and ASIX parts is that the ASIX receiver filter is programmed -using two special registers where as the DEC chip is programmed -by uploading a special setup frame via the transmit DMA engine. -The ASIX receive filter can only be programmed with a single -perfect filter entry for the local station address and a 64-bit -multicast hash table; the DEC filter supports several other -options. The ASIX Fast Ethernet controller supports both -10 and 100Mbps speeds in either full or half duplex using -an external MII transceiver. -.Pp -The -.Nm -driver supports the following media types: -.Pp -.Bl -tag -width xxxxxxxxxxxxxxxxxxxx -.It autoselect -Enable autoselection of the media type and options. -The user can manually override -the autoselected mode by adding media options to the -.Xr hostname.if 5 -file. -.It 10baseT/UTP -Set 10Mbps operation. The -.Ar mediaopt -option can also be used to select either -.Ar full-duplex -or -.Ar half-duplex modes. -.It 100baseTX -Set 100Mbps (fast ethernet) operation. The -.Ar mediaopt -option can also be used to select either -.Ar full-duplex -or -.Ar half-duplex -modes. -.El -.Pp -The -.Nm -driver supports the following media options: -.Pp -.Bl -tag -width xxxxxxxxxxxxxxxxxxxx -.It full-duplex -Force full duplex operation -.It half-duplex -Force half duplex operation. -.El -.Pp -For more information on configuring this device, see -.Xr ifconfig 8 . -.Sh DIAGNOSTICS -.Bl -diag -.It "ax%d: couldn't map memory" -A fatal initialization error has occurred. -.It "ax%d: couldn't map interrupt" -A fatal initialization error has occurred. -.It "ax%d: watchdog timeout" -The device has stopped responding to the network, or there is a problem with -the network connection (cable). -.It "ax%d: no memory for rx list" -The driver failed to allocate an mbuf for the receiver ring. -.It "ax%d: no memory for tx list" -The driver failed to allocate an mbuf for the transmitter ring when -allocating a pad buffer or collapsing an mbuf chain into a cluster. -.It "ax%d: chip is in D3 power state -- setting to D0" -This message applies only to adapters which support power -management. Some operating systems place the controller in low power -mode when shutting down, and some PCI BIOSes fail to bring the chip -out of this state before configuring it. The controller loses all of -its PCI configuration in the D3 state, so if the BIOS does not set -it back to full power mode in time, it won't be able to configure it -correctly. The driver tries to detect this condition and bring -the adapter back to the D0 (full power) state, but this may not be -enough to return the driver to a fully operational condition. If -you see this message at boot time and the driver fails to attach -the device as a network interface, you will have to perform second -warm boot to have the device properly configured. -.Pp -Note that this condition only occurs when warm booting from another -operating system. If you power down your system prior to booting -.Ox , -the card should be configured correctly. -.El -.Sh SEE ALSO -.Xr arp 4 , -.Xr netintro 4 , -.Xr ifconfig 8 -.Rs -.%T ASIX AX81140A data sheet -.%O http://www.asix.com.tw -.Re -.Sh HISTORY -The -.Nm -device driver first appeared in -.Fx 3.0 . -.Ox -support was added in -.Ox 2.6 . -.Sh AUTHORS -The -.Nm -driver was written by Bill Paul <wpaul@ctr.columbia.edu> and ported to -.Ox -by Aaron Campbell <aaron@openbsd.org>. |