diff options
Diffstat (limited to 'share/man/man5/remote.5')
| -rw-r--r-- | share/man/man5/remote.5 | 155 |
1 files changed, 151 insertions, 4 deletions
diff --git a/share/man/man5/remote.5 b/share/man/man5/remote.5 index 3f5f0a0f772..31d2b403019 100644 --- a/share/man/man5/remote.5 +++ b/share/man/man5/remote.5 @@ -1,4 +1,4 @@ -.\" $OpenBSD: remote.5,v 1.8 2000/10/26 00:37:05 aaron Exp $ +.\" $OpenBSD: remote.5,v 1.9 2001/04/12 22:36:51 millert Exp $ .\" $NetBSD: remote.5,v 1.4 1997/04/20 00:05:27 mellon Exp $ .\" .\" Copyright (c) 1983, 1991, 1993 @@ -104,6 +104,15 @@ A boolean capability is specified by simply listing the capability. .It Sy \&at (str) Auto call unit type. +.It Sy \&be +(bool) +Initialize the +.Xr tip +variable +.Dq beautify +to +.Sy on , +so that non-printable characters will be discarded when scripting. .It Sy \&br (num) The baud rate used in establishing @@ -123,8 +132,10 @@ Default is the same as the field. .It Sy \&dc (bool) -This host is directly connected, and tip should not expect carrier detect -to be high, nor should it exit if carrier detect drops. +This host is directly connected, and +.Xr tip +should not expect carrier detect to be high, nor should it exit if +carrier detect drops. .It Sy \&di (str) Disconnect message sent to the host when a disconnect is requested by the user. @@ -139,6 +150,18 @@ If this file refers to a terminal line, .Xr tip 1 attempts to perform an exclusive open on the device to insure only one user at a time has access to the port. +.It Sy \&ec +(bool) +Initialize the +.Xr tip +variable +.Dq echocheck +to +.Sy on , +so that +.Xr tip +will synchronize with the remote host during file +transfer by waiting for the last character transmitted to echo. .It Sy \&el (str) Characters marking an end-of-line. @@ -150,6 +173,30 @@ escapes are only recognized by after one of the characters in .Sy el , or after a carriage-return. +.It Sy \&es +(str) +The escape character for +.Xr tip . +The default is +.Dq ~ . +.It Sy \&et +(num) +Number of seconds to wait for an echo response when +.Dq echocheck +mode is on. +The default value is 10 seconds. +.It Sy \&ex +(str) +Set of non-printable characters not to be discarded when scripting +with beautification turned on. +The default value is +.Dq \et\en\eb\ef . +.It Sy \&fo +(str) +Character used to force literal data transmission. +The default value is +.Sq \e020 +(^P). .It Sy \&fs (str) Frame size for transfers. @@ -163,6 +210,34 @@ The host uses half-duplex communication, local echo should be performed. Input end-of-file marks. The default is .Dv NULL . +.It Sy \&nb +(bool) +Initialize the +.Xr tip +variable +.Dq beautify +to +.Sy off , +so that non-printable characters will not be discarded when scripting. +.It Sy \&nt +(bool) +Initialize the +.Xr tip +variable +.Dq tandem +to +.Sy off , +so that XON/XOFF flow control will not be used to throttle data +from the remote host. +.It Sy \&nv +(bool) +Initialize the +.Xr tip +variable +.Dq verbose +to +.Sy off , +so that verbose mode will be turned off. .It Sy \&oe (str) Output end-of-file string. @@ -183,7 +258,7 @@ This may be one of or .Dq one (always set bit 8 to 1). -The default is even parity. +The default is no parity. .It Sy \&pn (str) Telephone number(s) for this host. @@ -195,10 +270,82 @@ searches the file .Pa /etc/phones file for a list of telephone numbers (see .Xr phones 5 ) . +.It Sy \&pr +(str) +Character that indicates end-of-line on the remote host. +The default value is +.Sq \en . +.It Sy \&ra +(bool) +Initialize the +.Xr tip +variable +.Dq raise +to +.Sy on , +so that lowercase letters are mapped to uppercase before sending +them to the remote host. +.It Sy \&rc +(str) +Character that toggles case-mapping mode. +The default value is +.Sq \e001 +(^A). +.It Sy \&re +(str) +The file in which to record session scripts. +The default value is +.Pa tip.record . +.It Sy \&rw +(str) +Initialize the +.Xr tip +variable +.Dq rawftp +to +.Sy on , +so that all characters will be sent as is during file transfers. +.It Sy \&sc +(bool) +Initialize the +.Xr tip +variable +.Dq script +to +.Sy on , +so that everything transmitted by the remote host will be recorded. +.It Sy \&ta +(bool) +Initialize the +.Xr tip +variable +.Dq tandem +to +.Sy on , +so that XON/XOFF flow control will be used to throttle data +from the remote host. +.It Sy \&tb +(bool) +Initialize the +.Xr tip +variable +.Dq tabexpand +to +.Sy on , +so that each tab will be expanded to 8 spaces during file transfers. .It Sy \&tc (str) Indicates that the list of capabilities is continued in the named description. This is used primarily to share common capability information. +.It Sy \&vb +(bool) +Initialize the +.Xr tip +variable +.Dq verbose +to +.Sy on , +so that verbose mode will be turned on. .El .Pp Here is a short example showing the use of the capability continuation |