diff options
Diffstat (limited to 'share/man')
| -rw-r--r-- | share/man/man4/strip.4 | 9 |
1 files changed, 4 insertions, 5 deletions
diff --git a/share/man/man4/strip.4 b/share/man/man4/strip.4 index e314316ee40..7d57804c8b9 100644 --- a/share/man/man4/strip.4 +++ b/share/man/man4/strip.4 @@ -1,4 +1,4 @@ -.\" $OpenBSD: strip.4,v 1.20 2004/06/20 17:37:15 aaron Exp $ +.\" $OpenBSD: strip.4,v 1.21 2004/06/26 14:13:18 jmc Exp $ .\" .\" Copyright 1996 The Board of Trustees of The Leland Stanford .\" Junior University. All Rights Reserved. @@ -27,7 +27,7 @@ Configures interfaces, named .Sy st Ns Ar 0 , .Sy st Ns Ar 1 , -etc, into a kernel built from a config file containing the +etc., into a kernel built from a config file containing the given entry. .Pp Each @@ -127,13 +127,13 @@ For example, the following route command will configure a routing entry to a radio with a MAC address of 1234-5678, and an IP address 10.11.12.13: .Pp -.Dl route add -host 10.11.12.13 -link 1:2:3:4:5:6:7:8 +.Dl "# route add -host 10.11.12.13 -link 1:2:3:4:5:6:7:8" .Pp Generalising from this example to other IP addresses and to other 8-digit MAC addresses should be clear. .Sh RADIO CONFIGURATION The Metricom radios can auto-baud at speeds up to 38.4k baud. -At higher speeds -- 57600 or 115200 -- the radio cannot autobaud. +At higher speeds \(em 57600 or 115200 \(em the radio cannot autobaud. When running at high speeds, the radio's serial port should be manually configured to permanently run at the desired speed. Use a terminal emulator and the Hayes command @@ -151,7 +151,6 @@ driver automatically detects if the radio has fallen out of starmode, and resets it back into starmode, if the baud rate was set correctly by .Xr slattach 8 . -.\" Why isn't .Ss documented in mdoc(7) and mdoc.samples(7)? .\" .Sh DIAGNOSTICS .Sh SEE ALSO .Xr arp 4 , |