diff options
Diffstat (limited to 'share')
| -rw-r--r-- | share/man/man5/bsd.port.mk.5 | 100 |
1 files changed, 93 insertions, 7 deletions
diff --git a/share/man/man5/bsd.port.mk.5 b/share/man/man5/bsd.port.mk.5 index 573776f785e..06d4b8830d3 100644 --- a/share/man/man5/bsd.port.mk.5 +++ b/share/man/man5/bsd.port.mk.5 @@ -1,4 +1,4 @@ -.\" $OpenBSD: bsd.port.mk.5,v 1.97 2003/07/09 20:23:34 jmc Exp $ +.\" $OpenBSD: bsd.port.mk.5,v 1.98 2003/07/12 12:46:44 espie Exp $ .\" .\" Copyright (c) 2000 Marc Espie .\" @@ -80,6 +80,8 @@ with REFETCH=true will try to fetch a version with the correct checksum from the .Ox main archive site in the case of a checksum mismatch. +.Ev NO_CHECKSUM +can be used to avoid all checksumming steps. .It Ar clean Clean ports contents. By default, it will clean the work directory. @@ -141,7 +143,7 @@ Do a fake port installation, that is, simulate the port installation under ${WRKINST}. Described in a separate section below. .It Ar fetch -Fetch the distfiles and patchfiles. +Fetch the distfiles and patchfiles, using ${FETCH_CMD}. Each file of the .Ev DISTFILES and @@ -173,6 +175,7 @@ See .Ev DISTDIR , .Ev DISTFILES , .Ev DIST_SUBDIR , +.Ev FETCH_CMD , .Ev FETCH_SYMLINK_DISTFILES , .Ev FULL_DISTDIR , .Ev MASTER_SITES , @@ -191,6 +194,8 @@ See Create the ${CHECKSUM_FILE} list of recorded checksums by running the cryptographic fingerprints sha1, md5 and rmd160 on ${ALLFILES} minus ${IGNOREFILES}. +.Ev NO_CHECKSUM +can be used to avoid all checksumming steps. .It Ar manpages-check Verify that .Xr makewhatis 8 @@ -305,6 +310,12 @@ to .Pa patch-file.orig .El .Sh VARIABLES +Note that some variables are marked as +.Sq User-settings , +which means that individual ports should not modify them, +and that some variables are marked as +.Sq read-only , +which means that they shouldn't ever be changed. .Bl -tag -width MASTER_SITES .It Ev show Invoked as make show=name, show the contents of variable name. @@ -339,6 +350,18 @@ set to autoconf is the correct way to specify which one to use. If autoconf must be run manually, .Ev MODGNU_AUTOCONF_DEPENDS can be used to specify what packages to depend upon. +.It Ev BATCH +User-settings. +Set to +.Sq Yes +to avoid ports that require user-interaction +.Po +See IGNORE +.Pc . +.It Ev BROKEN +Define only for broken ports, set to reason the port is broken. +See also +.Ev NO_IGNORE . .It Ev BSD_INSTALL_{PROGRAM,SCRIPT,DATA,MAN}[_DIR] Macros passed to make and configure invocations. Set based on corresponding INSTALL_* variables. @@ -659,7 +682,8 @@ By default, ${DESTDIRNAME}=${WRKINST}. Command used to fetch distfiles for this port. Defaults to .Pa /usr/bin/ftp . -No current port overrides the default. +User settings. +Can be used to go through excessively paranoid firewalls. .It Ev FETCH_DEPENDS See BUILD_DEPENDS for specification. Fetch dependencies are checked at the beginning of the extract stage. @@ -703,6 +727,7 @@ Defaults to gmake. Set to the list of files that cannot be checksummed. For use by ports which fetch dynamically generated archives that can't be checksummed. +Avoid using IGNOREFILES whenver possible. .It Ev LIB_DEPENDS Libraries this port depends upon. Each item has the form @@ -725,8 +750,22 @@ such. Complete path to directory where ${DISTFILES} and ${PATCHFILES} will be located, to be used in hand-crafted extraction targets (read-only). .It Ev IGNORE -The port is ignored if set to -.Sq Yes . +The port is ignored and ${IGNORE} is printed if defined. +Usually set to the reason the port is ignored. +See also +.Ev BATCH , +.Ev BROKEN , +.Ev IGNORE_SILENT , +.Ev INTERACTIVE , +.Ev IS_INTERACTIVE , +.Ev NOT_FOR_ARCHS , +.Ev NO_IGNORE , +.Ev ONLY_FOR_ARCHS , +.Ev USE_X11 . +.It Ev IGNORE_SILENT +If set to +.Sq Yes , +do not print anything when ignoring a port. .It Ev INSTALL_{PROGRAM,SCRIPT,DATA,MAN}[_DIR] Macros to use to install a program, a script, a man page, or data (or the corresponding directory, respectively). @@ -774,6 +813,16 @@ Used after changing directory to ${WRKBUILD}. The make program that is used for building the port. Set to ${MAKE} or ${GMAKE} depending on USE_GMAKE. Read-only. +.It Ev MASTER_SITES +List of primary location from which distfiles and patchfiles are retrieved. +See the +.Ar fetch +target for more details. +See +.Xr ports 7 +for user configuration. +.It Ev MASTER_SITES0 , ... , MASTER_SITES9 +Supplementary locations from which distfiles and patchfiles are retrieved. .It Ev MESSAGE File recorded in the package and displayed during installation. Defaults to ${PKGDIR}/MESSAGE if this file exists. @@ -803,19 +852,37 @@ Set to a list of package extensions for ports that create multiple packages. See .Qq Flavors and multi-packages below. -.Pp .It Ev NOT_FOR_ARCHS List of architectures on which this port does not build. See also .Ev ONLY_FOR_ARCHS . .It Ev NO_BUILD Port does not need any build stage. +.It Ev NO_CHECKSUM +Set to +.Sq Yes +to avoid +.Ar checksum , +.Ar makesum , +and +.Ar addsum +actions entirely. +User settings. +Beware of the full implications of this mechanism, namely that it disables +entirely the basic authentication mechanisms of the ports tree. .It Ev NO_DEPENDS Don't verify build of dependencies. Do not use in any ports Makefile. This is only meant as a user convenience when, e.g., you just want to browse through a given port's source and do not wish to trigger the build of dependencies. +.It Ev NO_IGNORE +If set to +.Sq Yes , +avoid ignoring a port for the usual reasons. +Use, for instance, for fetching all distfiles, or for fixing a broken port. +See also +.Ev IGNORE . .It Ev NO_REGRESS Port does not have any regression tests. .It Ev NO_SHARED_ARCHS @@ -843,6 +910,9 @@ Revision number of (read-only). .It Ev PACKAGES Base location for packages built (default: ${PORTSDIR}/packages/${ARCH}). +.it Ev PACKAGING +Defined while building packages, read-only. +See the description of FLAVORS AND MULTI_PACKAGES for a detailed explanation. .It Ev PATCH Command to use to apply all patches. Defaults to @@ -936,6 +1006,11 @@ PATCH_LIST=${PORTSDIR}/x11/kde/libs2/patches/p-* patch-* .It Ev PATCH_STRIP Patch option used to strip directory levels while applying port's patches. Defaults to -p0 . +.It Ev PKG_DBDIR +Path to package installation records. +Defaults to +.Pa /var/db/pkg . +User settings. .It Ev PORTHOME Setting of env variable .Ev HOME @@ -1125,7 +1200,7 @@ Apart from the actual port, may hold all kinds of cookies that checkpoint the port's build. Read-only. Ports that need to know the WRKDIR of another port must use -cd that_port_dir && make show VARNAME=WRKDIR for this. +cd that_port_dir && make show=WRKDIR for this. Note that WRKDIR may be a symbolic link. .It Ev WRKDIST Subdirectory of ${WRKDIR} where the source is normally unpacked. @@ -1406,6 +1481,15 @@ becomes PATCH_FILES=foo.diff.gz:0 MASTER_SITES0=ftp://ftp.zoinx.org/pub/ .Ed +.It Ev PERMIT_{DISTFILES,PACKAGE}_{CDROM,FTP} +Set to +.Sq Yes +if package or distfiles can be allowed on ftp sites or cdrom without legal +issues. +Set to reason not to otherwise. +PERMIT_* lines in the Makefile should be preceded with a comment explaining +details about licensing and patents issues the port may have. +Porters must be very thorough in their checks. In case of doubt, ask. .It Ev PLIST_SRC From .Nx . @@ -1441,6 +1525,8 @@ instead. Use .Ev CONFIGURE_STYLE instead. +.It Ev VARNAME +Use make show=name instead of make show VARNAME=name. .El .Sh OBSOLETE FILES .Bl -tag -width files/md5 |