diff options
Diffstat (limited to 'sys/arch/amiga/conf/INSTALL')
| -rw-r--r-- | sys/arch/amiga/conf/INSTALL | 221 |
1 files changed, 221 insertions, 0 deletions
diff --git a/sys/arch/amiga/conf/INSTALL b/sys/arch/amiga/conf/INSTALL new file mode 100644 index 00000000000..00f6be5cc5e --- /dev/null +++ b/sys/arch/amiga/conf/INSTALL @@ -0,0 +1,221 @@ +# $NetBSD: INSTALL,v 1.1.2.1 1995/11/24 18:56:13 chopps Exp $ + +# +# GENERIC AMIGA +# +# This configuration file contains all possible options +# + +include "std.amiga" + +maxusers 8 +options TIMEZONE=300, DST=1 + +# +# processors this kernel should support +# +options "M68040" # support for 040 +options FPSP # MC68040 floating point support +options "M68030" # support for 030 +options "M68020" # support for 020/851 +options FPCOPROC # Support for MC6888[12] (Required) + +options SWAPPAGER # Pager for processes (Required) +options VNODEPAGER # Pager for vnodes (Required) +options DEVPAGER # Pager for devices (Required) + +# +# Networking options +# +options INET # IP networking support (Required) +#options ISO # ISO Networking support +#options TPIP # ARGO TP networking support +#options CCITT # CCITT X.25 +#options NS # Xerox XNS +#options EON # ISO CLNL over IP +#options GATEWAY # Packet forwarding +#options DIRECTED_BROADCAST # Broadcast across subnets +#options NSIP # XNS over IP + +# +# File system related options +# +options QUOTA # Disk quotas for local disks +options NFSSERVER # Network File System server side code +options NFSCLIENT # Network File System client side code + +# +# File systems +# +options FFS # Berkeley fast file system +options MFS # Memory based filesystem +options PROCFS # Process filesystem +options KERNFS # Kernel parameter filesystem (Recommended) +options FDESC # /dev/fd filesystem +options NULLFS # Loopback filesystem +options FIFO # FIFO operations on vnodes (Recommended) +options ADOSFS # AmigaDOS file system +options "CD9660" # ISO 9660 file system, with Rock Ridge +#options PORTAL # Portal filesystem +#options MSDOSFS # MS-DOS filesystem + + +# +# Compatability options for various existing systems +# +options "COMPAT_10" # compatability with older NetBSD release +options "COMPAT_09" # compatability with older NetBSD release +options "COMPAT_43" # 4.3 BSD compatible system calls +#options COMPAT_SUNOS # Support to run Sun (m68k) executables +options "TCP_COMPAT_42" # Use 4.2 BSD style TCP +options "COMPAT_NOMID" # allow nonvalid machine id executables +#options COMPAT_HPUX # HP300 compatability + +# +# Support for System V IPC facilities. +# +options SYSVSHM # System V-like shared memory +options SYSVMSG # System V-like messages +options SYSVSEM # System V-like semaphores + +# +# Support for various kernel options +# +options GENERIC # Mini-root boot support +options LKM # Loadable kernel modules +options KTRACE # Add kernel tracing system call +options DIAGNOSTIC # Add additional error checking code +options "NKMEMCLUSTERS=256" # Size of kernel malloc area + +# +# Misc. debuging options +# +options PANICWAIT # Require keystroke to dump/reboot +#options DEBUG # Add debugging statements +#options DDB # Kernel debugger +#options SYSCALL_DEBUG # debug all syscalls. +#options SCSIDEBUG # Add SCSI debugging statements +#options KGDB # Kernel debugger (KGDB) support +#options PANICBUTTON # Forced crash via keypress (???) + +# +# Amiga specific options +# +options MACHINE_NONCONTIG # Non-contiguous memory support + +options RETINACONSOLE # enable code to allow retina to be console +options ULOWELLCONSOLE # enable code to allow a2410 to be console +options CL5426CONSOLE # Cirrus console + +options GRF_ECS # Enhanced Chip Set +options GRF_NTSC # NTSC +options GRF_PAL # PAL +options "GRF_A2024" # Support for the A2024 +options GRF_AGA # AGA Chip Set +options GRF_CL5426 # Cirrus board support +#options "KFONT_8X11" # 8x11 font + +# This is how you would tell the kernel the A2410 oscillator frequencies: +# The used frequencies are the defaults, and don't need option setting +#options "ULOWELL_OSC1=36000000" +#options "ULOWELL_OSC2=66667000" + +# This is how you specify the blitting speed, higher values may speed up blits +# a littel bit. If you raise this value too much some trash may appear. +# the commented version is the default. +#options RH_MEMCLK 61000000 +# this option enables the 64 bit sprite which doesn't seems to be work +# for quite a few people. E.g. The cursor sprite will turn to a block +# when moved to the top of the screen in X. +#options RH_64BIT_SPRITE +# enables fast scroll code appears to now work on 040 systems. +#options RETINA_SPEED_HACK + +grfcc0 at mainbus0 # custom chips +grfrt0 at zbus0 # retina II +grfrh0 at zbus0 # retina III +grfcl* at zbus0 # Picasso II/Piccalo/Spectrum +grful0 at zbus0 # A2410 +grfcv0 at zbus0 # CyverVision 64 + +grf0 at grfcc0 +grf1 at grfrt0 +grf2 at grfrh0 +grf3 at grfcl? +grf4 at grful0 +grf5 at grfcv0 + +ite0 at grf0 # terminal emulators for grf's +ite1 at grf1 # terminal emulators for grf's +ite2 at grf2 # terminal emulators for grf's +ite3 at grf3 # terminal emulators for grf's +ite4 at grf4 # terminal emulators for grf's + +msc0 at zbus0 # A2232 MSC multiport serial. +mfc0 at zbus0 # MultiFaceCard I/O board +mfcs0 at mfc0 unit 0 # MFC serial +mfcs1 at mfc0 unit 1 # MFC serial +#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] +#mfc1 at zbus0 # MultiFaceCard 2nd I/O board +#mfcs2 at mfc1 unit 0 +#mfcs3 at mfc1 unit 1 +#mfcp1 at mfc1 unit 0 + +le0 at zbus0 # Lance ethernet. +ed0 at zbus0 # dp8390 ethernet +es0 at zbus0 # SMC 91C90 ethernet +qn0 at zbus0 # quicknet ethernet +ae0 at zbus0 # Ariadne ethernet +bah0 at zbus0 # C= arcnet + + +# scsi stuff, all possible +gvpbus* at zbus0 +gtsc0 at gvpbus? # GVP series II scsi +ahsc0 at mainbus0 # A3000 scsi +atzsc0 at zbus0 +wstsc0 at zbus0 # Wordsync II scsi +ivsc0 at zbus0 # IVS scsi +mlhsc0 at zbus0 # Hacker scsi +otgsc0 at zbus0 # 12 gauge scsi +zssc0 at zbus0 # Zeus scsi +mgnsc0 at zbus0 # Magnum scsi +wesc0 at zbus0 # Warp Engine scsi +idesc0 at mainbus0 # A4000 & A1200 IDE +afsc0 at zbus0 # A4091 scsi +aftsc0 at mainbus0 # A4000T scsi +flsc0 at zbus0 # FastlaneZ3 scsi +bzsc0 at zbus0 # Blizzard 1230 scsi + +scsibus* at gtsc0 +scsibus* at ahsc0 +scsibus* at atzsc0 +scsibus* at wstsc0 +scsibus* at ivsc0 +scsibus* at mlhsc0 +scsibus* at otgsc0 +scsibus* at zssc0 +scsibus* at mgnsc0 +scsibus* at wesc0 +scsibus* at idesc0 +scsibus* at afsc0 +scsibus* at aftsc0 +scsibus* at flsc0 +scsibus* at bzsc0 + +# each hard drive from low target to high +# will configure to the next available sd unit number +sd* at scsibus? target ? lun ? # scsi disks + +st* at scsibus? target ? lun ? # scsi tapes +cd* at scsibus? target ? lun ? # scsi cd's + +pseudo-device sl # slip +pseudo-device ppp # ppp +pseudo-device view 10 # views +pseudo-device pty 16 # pseudo terminals +pseudo-device loop # network loopback +#pseudo-device bpfilter 2 # berkeley packet filters +#pseudo-device tun 2 + +config netbsd swap on generic |