diff options
Diffstat (limited to 'sys/arch/amiga/conf/INSTALL')
-rw-r--r-- | sys/arch/amiga/conf/INSTALL | 221 |
1 files changed, 0 insertions, 221 deletions
diff --git a/sys/arch/amiga/conf/INSTALL b/sys/arch/amiga/conf/INSTALL deleted file mode 100644 index 00f6be5cc5e..00000000000 --- a/sys/arch/amiga/conf/INSTALL +++ /dev/null @@ -1,221 +0,0 @@ -# $NetBSD: INSTALL,v 1.1.2.1 1995/11/24 18:56:13 chopps Exp $ - -# -# GENERIC AMIGA -# -# This configuration file contains all possible options -# - -include "std.amiga" - -maxusers 8 -options TIMEZONE=300, DST=1 - -# -# processors this kernel should support -# -options "M68040" # support for 040 -options FPSP # MC68040 floating point support -options "M68030" # support for 030 -options "M68020" # support for 020/851 -options FPCOPROC # Support for MC6888[12] (Required) - -options SWAPPAGER # Pager for processes (Required) -options VNODEPAGER # Pager for vnodes (Required) -options DEVPAGER # Pager for devices (Required) - -# -# Networking options -# -options INET # IP networking support (Required) -#options ISO # ISO Networking support -#options TPIP # ARGO TP networking support -#options CCITT # CCITT X.25 -#options NS # Xerox XNS -#options EON # ISO CLNL over IP -#options GATEWAY # Packet forwarding -#options DIRECTED_BROADCAST # Broadcast across subnets -#options NSIP # XNS over IP - -# -# File system related options -# -options QUOTA # Disk quotas for local disks -options NFSSERVER # Network File System server side code -options NFSCLIENT # Network File System client side code - -# -# File systems -# -options FFS # Berkeley fast file system -options MFS # Memory based filesystem -options PROCFS # Process filesystem -options KERNFS # Kernel parameter filesystem (Recommended) -options FDESC # /dev/fd filesystem -options NULLFS # Loopback filesystem -options FIFO # FIFO operations on vnodes (Recommended) -options ADOSFS # AmigaDOS file system -options "CD9660" # ISO 9660 file system, with Rock Ridge -#options PORTAL # Portal filesystem -#options MSDOSFS # MS-DOS filesystem - - -# -# Compatability options for various existing systems -# -options "COMPAT_10" # compatability with older NetBSD release -options "COMPAT_09" # compatability with older NetBSD release -options "COMPAT_43" # 4.3 BSD compatible system calls -#options COMPAT_SUNOS # Support to run Sun (m68k) executables -options "TCP_COMPAT_42" # Use 4.2 BSD style TCP -options "COMPAT_NOMID" # allow nonvalid machine id executables -#options COMPAT_HPUX # HP300 compatability - -# -# Support for System V IPC facilities. -# -options SYSVSHM # System V-like shared memory -options SYSVMSG # System V-like messages -options SYSVSEM # System V-like semaphores - -# -# Support for various kernel options -# -options GENERIC # Mini-root boot support -options LKM # Loadable kernel modules -options KTRACE # Add kernel tracing system call -options DIAGNOSTIC # Add additional error checking code -options "NKMEMCLUSTERS=256" # Size of kernel malloc area - -# -# Misc. debuging options -# -options PANICWAIT # Require keystroke to dump/reboot -#options DEBUG # Add debugging statements -#options DDB # Kernel debugger -#options SYSCALL_DEBUG # debug all syscalls. -#options SCSIDEBUG # Add SCSI debugging statements -#options KGDB # Kernel debugger (KGDB) support -#options PANICBUTTON # Forced crash via keypress (???) - -# -# Amiga specific options -# -options MACHINE_NONCONTIG # Non-contiguous memory support - -options RETINACONSOLE # enable code to allow retina to be console -options ULOWELLCONSOLE # enable code to allow a2410 to be console -options CL5426CONSOLE # Cirrus console - -options GRF_ECS # Enhanced Chip Set -options GRF_NTSC # NTSC -options GRF_PAL # PAL -options "GRF_A2024" # Support for the A2024 -options GRF_AGA # AGA Chip Set -options GRF_CL5426 # Cirrus board support -#options "KFONT_8X11" # 8x11 font - -# This is how you would tell the kernel the A2410 oscillator frequencies: -# The used frequencies are the defaults, and don't need option setting -#options "ULOWELL_OSC1=36000000" -#options "ULOWELL_OSC2=66667000" - -# This is how you specify the blitting speed, higher values may speed up blits -# a littel bit. If you raise this value too much some trash may appear. -# the commented version is the default. -#options RH_MEMCLK 61000000 -# this option enables the 64 bit sprite which doesn't seems to be work -# for quite a few people. E.g. The cursor sprite will turn to a block -# when moved to the top of the screen in X. -#options RH_64BIT_SPRITE -# enables fast scroll code appears to now work on 040 systems. -#options RETINA_SPEED_HACK - -grfcc0 at mainbus0 # custom chips -grfrt0 at zbus0 # retina II -grfrh0 at zbus0 # retina III -grfcl* at zbus0 # Picasso II/Piccalo/Spectrum -grful0 at zbus0 # A2410 -grfcv0 at zbus0 # CyverVision 64 - -grf0 at grfcc0 -grf1 at grfrt0 -grf2 at grfrh0 -grf3 at grfcl? -grf4 at grful0 -grf5 at grfcv0 - -ite0 at grf0 # terminal emulators for grf's -ite1 at grf1 # terminal emulators for grf's -ite2 at grf2 # terminal emulators for grf's -ite3 at grf3 # terminal emulators for grf's -ite4 at grf4 # terminal emulators for grf's - -msc0 at zbus0 # A2232 MSC multiport serial. -mfc0 at zbus0 # MultiFaceCard I/O board -mfcs0 at mfc0 unit 0 # MFC serial -mfcs1 at mfc0 unit 1 # MFC serial -#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet] -#mfc1 at zbus0 # MultiFaceCard 2nd I/O board -#mfcs2 at mfc1 unit 0 -#mfcs3 at mfc1 unit 1 -#mfcp1 at mfc1 unit 0 - -le0 at zbus0 # Lance ethernet. -ed0 at zbus0 # dp8390 ethernet -es0 at zbus0 # SMC 91C90 ethernet -qn0 at zbus0 # quicknet ethernet -ae0 at zbus0 # Ariadne ethernet -bah0 at zbus0 # C= arcnet - - -# scsi stuff, all possible -gvpbus* at zbus0 -gtsc0 at gvpbus? # GVP series II scsi -ahsc0 at mainbus0 # A3000 scsi -atzsc0 at zbus0 -wstsc0 at zbus0 # Wordsync II scsi -ivsc0 at zbus0 # IVS scsi -mlhsc0 at zbus0 # Hacker scsi -otgsc0 at zbus0 # 12 gauge scsi -zssc0 at zbus0 # Zeus scsi -mgnsc0 at zbus0 # Magnum scsi -wesc0 at zbus0 # Warp Engine scsi -idesc0 at mainbus0 # A4000 & A1200 IDE -afsc0 at zbus0 # A4091 scsi -aftsc0 at mainbus0 # A4000T scsi -flsc0 at zbus0 # FastlaneZ3 scsi -bzsc0 at zbus0 # Blizzard 1230 scsi - -scsibus* at gtsc0 -scsibus* at ahsc0 -scsibus* at atzsc0 -scsibus* at wstsc0 -scsibus* at ivsc0 -scsibus* at mlhsc0 -scsibus* at otgsc0 -scsibus* at zssc0 -scsibus* at mgnsc0 -scsibus* at wesc0 -scsibus* at idesc0 -scsibus* at afsc0 -scsibus* at aftsc0 -scsibus* at flsc0 -scsibus* at bzsc0 - -# each hard drive from low target to high -# will configure to the next available sd unit number -sd* at scsibus? target ? lun ? # scsi disks - -st* at scsibus? target ? lun ? # scsi tapes -cd* at scsibus? target ? lun ? # scsi cd's - -pseudo-device sl # slip -pseudo-device ppp # ppp -pseudo-device view 10 # views -pseudo-device pty 16 # pseudo terminals -pseudo-device loop # network loopback -#pseudo-device bpfilter 2 # berkeley packet filters -#pseudo-device tun 2 - -config netbsd swap on generic |