diff options
Diffstat (limited to 'sys/arch/hp300/dev/grf_tc.c')
| -rw-r--r-- | sys/arch/hp300/dev/grf_tc.c | 830 |
1 files changed, 0 insertions, 830 deletions
diff --git a/sys/arch/hp300/dev/grf_tc.c b/sys/arch/hp300/dev/grf_tc.c deleted file mode 100644 index 5f407139c0e..00000000000 --- a/sys/arch/hp300/dev/grf_tc.c +++ /dev/null @@ -1,830 +0,0 @@ -/* $OpenBSD: grf_tc.c,v 1.12 2005/01/08 22:13:53 miod Exp $ */ -/* $NetBSD: grf_tc.c,v 1.11 1997/03/31 07:34:18 scottr Exp $ */ - -/* - * Copyright (c) 1996 Jason R. Thorpe. All rights reserved. - * Copyright (c) 1988 University of Utah. - * Copyright (c) 1990, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * the Systems Programming Group of the University of Utah Computer - * Science Department. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * from: Utah $Hdr: grf_tc.c 1.20 93/08/13$ - * - * @(#)grf_tc.c 8.4 (Berkeley) 1/12/94 - */ - -/* - * Graphics routines for TOPCAT and CATSEYE frame buffers - */ -#include <sys/param.h> -#include <sys/conf.h> -#include <sys/errno.h> -#include <sys/proc.h> -#include <sys/ioctl.h> -#include <sys/tty.h> -#include <sys/systm.h> -#include <sys/device.h> - -#include <machine/autoconf.h> -#include <machine/cpu.h> - -#include <dev/cons.h> - -#include <hp300/dev/dioreg.h> -#include <hp300/dev/diovar.h> -#include <hp300/dev/diodevs.h> -#include <hp300/dev/intiovar.h> - -#include <hp300/dev/grfioctl.h> -#include <hp300/dev/grfvar.h> -#include <hp300/dev/grfreg.h> -#include <hp300/dev/grf_tcreg.h> - -#include <hp300/dev/itevar.h> -#include <hp300/dev/itereg.h> - -#include "ite.h" - -int tc_init(struct grf_data *, int, caddr_t); -int tc_mode(struct grf_data *, int, caddr_t); - -void topcat_common_attach(struct grfdev_softc *, caddr_t, u_int8_t); - -int topcat_intio_match(struct device *, void *, void *); -void topcat_intio_attach(struct device *, struct device *, void *); - -int topcat_dio_match(struct device *, void *, void *); -void topcat_dio_attach(struct device *, struct device *, void *); - -int topcat_console_scan(int, caddr_t, void *); -void topcatcnprobe(struct consdev *cp); -void topcatcninit(struct consdev *cp); - -struct cfattach topcat_intio_ca = { - sizeof(struct grfdev_softc), topcat_intio_match, topcat_intio_attach -}; - -struct cfattach topcat_dio_ca = { - sizeof(struct grfdev_softc), topcat_dio_match, topcat_dio_attach -}; - -struct cfdriver topcat_cd = { - NULL, "topcat", DV_DULL -}; - -/* Topcat (bobcat) grf switch */ -struct grfsw topcat_grfsw = { - GID_TOPCAT, GRFBOBCAT, "topcat", tc_init, tc_mode -}; - -/* Lo-res catseye grf switch */ -struct grfsw lrcatseye_grfsw = { - GID_LRCATSEYE, GRFCATSEYE, "lo-res catseye", tc_init, tc_mode -}; - -/* Hi-res catseye grf switch */ -struct grfsw hrcatseye_grfsw = { - GID_HRCCATSEYE, GRFCATSEYE, "hi-res catseye", tc_init, tc_mode -}; - -/* Hi-res monochrome catseye grf switch */ -struct grfsw hrmcatseye_grfsw = { - GID_HRMCATSEYE, GRFCATSEYE, "hi-res catseye", tc_init, tc_mode -}; - -#if NITE > 0 -void topcat_init(struct ite_data *); -void topcat_deinit(struct ite_data *); -void topcat_putc(struct ite_data *, int, int, int, int); -void topcat_cursor(struct ite_data *, int); -void topcat_clear(struct ite_data *, int, int, int, int); -void topcat_scroll(struct ite_data *, int, int, int, int); -void topcat_windowmove(struct ite_data *, int, int, int, int, - int, int, int); - -/* Topcat/catseye ite switch */ -struct itesw topcat_itesw = { - topcat_init, topcat_deinit, topcat_clear, topcat_putc, - topcat_cursor, topcat_scroll, ite_readbyte, ite_writeglyph -}; -#endif /* NITE > 0 */ - -int -topcat_intio_match(parent, match, aux) - struct device *parent; - void *match, *aux; -{ - struct intio_attach_args *ia = aux; - struct grfreg *grf; - - grf = (struct grfreg *)IIOV(GRFIADDR); - - if (badaddr((caddr_t)grf)) - return (0); - - if (grf->gr_id == DIO_DEVICE_ID_FRAMEBUFFER) { - switch (grf->gr_id2) { - case DIO_DEVICE_SECID_TOPCAT: - case DIO_DEVICE_SECID_LRCATSEYE: - case DIO_DEVICE_SECID_HRCCATSEYE: - case DIO_DEVICE_SECID_HRMCATSEYE: -#if 0 - case DIO_DEVICE_SECID_XXXCATSEYE: -#endif - ia->ia_addr = (caddr_t)GRFIADDR; - return (1); - } - } - - return (0); -} - -void -topcat_intio_attach(parent, self, aux) - struct device *parent, *self; - void *aux; -{ - struct grfdev_softc *sc = (struct grfdev_softc *)self; - struct grfreg *grf; - - grf = (struct grfreg *)IIOV(GRFIADDR); - sc->sc_scode = -1; /* XXX internal i/o */ - - topcat_common_attach(sc, (caddr_t)grf, grf->gr_id2); -} - -int -topcat_dio_match(parent, match, aux) - struct device *parent; - void *match, *aux; -{ - struct dio_attach_args *da = aux; - - if (da->da_id == DIO_DEVICE_ID_FRAMEBUFFER) { - switch (da->da_secid) { - case DIO_DEVICE_SECID_TOPCAT: - case DIO_DEVICE_SECID_LRCATSEYE: - case DIO_DEVICE_SECID_HRCCATSEYE: - case DIO_DEVICE_SECID_HRMCATSEYE: -#if 0 - case DIO_DEVICE_SECID_XXXCATSEYE: -#endif - return (1); - } - } - - return (0); -} - -void -topcat_dio_attach(parent, self, aux) - struct device *parent, *self; - void *aux; -{ - struct grfdev_softc *sc = (struct grfdev_softc *)self; - struct dio_attach_args *da = aux; - caddr_t grf; - - sc->sc_scode = da->da_scode; - if (sc->sc_scode == conscode) - grf = conaddr; - else { - grf = iomap(dio_scodetopa(sc->sc_scode), da->da_size); - if (grf == 0) { - printf("%s: can't map framebuffer\n", - sc->sc_dev.dv_xname); - return; - } - } - - topcat_common_attach(sc, grf, da->da_secid); -} - -void -topcat_common_attach(sc, grf, secid) - struct grfdev_softc *sc; - caddr_t grf; - u_int8_t secid; -{ - struct grfsw *sw; - - switch (secid) { - case DIO_DEVICE_SECID_TOPCAT: - sw = &topcat_grfsw; - break; - - case DIO_DEVICE_SECID_LRCATSEYE: - sw = &lrcatseye_grfsw; - break; - - case DIO_DEVICE_SECID_HRCCATSEYE: - sw = &hrcatseye_grfsw; - break; - - case DIO_DEVICE_SECID_HRMCATSEYE: - sw = &hrmcatseye_grfsw; - break; -#if 0 - case DIO_DEVICE_SECID_XXXCATSEYE: - sw = XXX? - break; -#endif - default: - printf("%s: unknown device 0x%x\n", - sc->sc_dev.dv_xname, secid); - panic("topcat_common_attach"); - } - -#if NITE > 0 - grfdev_attach(sc, tc_init, grf, sw, &topcat_itesw); -#else - grfdev_attach(sc, tc_init, grf, sw, NULL); -#endif /* NITE > 0 */ -} - -/* - * Initialize hardware. - * Must fill in the grfinfo structure in g_softc. - * Returns 0 if hardware not present, non-zero ow. - */ -int -tc_init(gp, scode, addr) - struct grf_data *gp; - int scode; - caddr_t addr; -{ - struct tcboxfb *tp = (struct tcboxfb *) addr; - struct grfinfo *gi = &gp->g_display; - volatile u_char *fbp; - u_char save; - int fboff; - - /* - * If the console has been initialized, and it was us, there's - * no need to repeat this. - */ - if (consinit_active || (scode != conscode)) { - if (ISIIOVA(addr)) - gi->gd_regaddr = (caddr_t) IIOP(addr); - else - gi->gd_regaddr = dio_scodetopa(scode); - gi->gd_regsize = 0x10000; - gi->gd_fbwidth = (tp->fbwmsb << 8) | tp->fbwlsb; - gi->gd_fbheight = (tp->fbhmsb << 8) | tp->fbhlsb; - gi->gd_fbsize = gi->gd_fbwidth * gi->gd_fbheight; - fboff = (tp->fbomsb << 8) | tp->fbolsb; - gi->gd_fbaddr = (caddr_t) (*((u_char *)addr + fboff) << 16); - if (gi->gd_regaddr >= (caddr_t)DIOII_BASE) { - /* - * For DIO II space the fbaddr just computed is the - * offset from the select code base (regaddr) of the - * framebuffer. Hence it is also implicitly the - * size of the set. - */ - gi->gd_regsize = (int) gi->gd_fbaddr; - gi->gd_fbaddr += (int) gi->gd_regaddr; - gp->g_regkva = addr; - gp->g_fbkva = addr + gi->gd_regsize; - } else { - /* - * For DIO space we need to map the separate - * framebuffer. - */ - gp->g_regkva = addr; - gp->g_fbkva = iomap(gi->gd_fbaddr, gi->gd_fbsize); - } - gi->gd_dwidth = (tp->dwmsb << 8) | tp->dwlsb; - gi->gd_dheight = (tp->dhmsb << 8) | tp->dhlsb; - gi->gd_planes = tp->num_planes; - gi->gd_colors = 1 << gi->gd_planes; - if (gi->gd_colors == 1) { - fbp = (u_char *) gp->g_fbkva; - tp->wen = ~0; - tp->prr = 0x3; - tp->fben = ~0; - save = *fbp; - *fbp = 0xFF; - gi->gd_colors = *fbp + 1; - *fbp = save; - } - } - return(1); -} - -/* - * Change the mode of the display. - * Right now all we can do is grfon/grfoff. - * Return a UNIX error number or 0 for success. - * Function may not be needed anymore. - */ -/*ARGSUSED*/ -int -tc_mode(gp, cmd, data) - struct grf_data *gp; - int cmd; - caddr_t data; -{ - int error = 0; - - switch (cmd) { - case GM_GRFON: - case GM_GRFOFF: - break; - - /* - * Remember UVA of mapping for GCDESCRIBE. - * XXX this should be per-process. - */ - case GM_MAP: - gp->g_data = data; - break; - - case GM_UNMAP: - gp->g_data = 0; - break; - -#ifdef COMPAT_HPUX - case GM_DESCRIBE: - { - struct grf_fbinfo *fi = (struct grf_fbinfo *)data; - struct grfinfo *gi = &gp->g_display; - int i; - - /* feed it what HP-UX expects */ - fi->id = gi->gd_id; - fi->mapsize = gi->gd_fbsize; - fi->dwidth = gi->gd_dwidth; - fi->dlength = gi->gd_dheight; - fi->width = gi->gd_fbwidth; - fi->length = gi->gd_fbheight; - fi->bpp = NBBY; - fi->xlen = (fi->width * fi->bpp) / NBBY; - fi->npl = gi->gd_planes; - fi->bppu = fi->npl; - fi->nplbytes = fi->xlen * ((fi->length * fi->bpp) / NBBY); - /* XXX */ - switch (gp->g_sw->gd_hwid) { - case GID_HRCCATSEYE: - bcopy("HP98550", fi->name, 8); - break; - case GID_LRCATSEYE: - bcopy("HP98549", fi->name, 8); - break; - case GID_HRMCATSEYE: - bcopy("HP98548", fi->name, 8); - break; - case GID_TOPCAT: - switch (gi->gd_colors) { - case 64: - bcopy("HP98547", fi->name, 8); - break; - case 16: - if (gi->gd_dheight == 400) { - bcopy("HP98543", fi->name, 8); - } else { - bcopy("HP98545", fi->name, 8); - } - break; - case 2: - bcopy("HP98544", fi->name, 8); - break; - } - break; - } - fi->attr = 2; /* HW block mover */ - /* - * If mapped, return the UVA where mapped. - */ - if (gp->g_data) { - fi->regbase = gp->g_data; - fi->fbbase = fi->regbase + gp->g_display.gd_regsize; - } else { - fi->fbbase = 0; - fi->regbase = 0; - } - for (i = 0; i < 6; i++) - fi->regions[i] = 0; - break; - } -#endif - - default: - error = EINVAL; - break; - } - return(error); -} - -#if NITE > 0 - -/* - * Topcat/catseye ite routines - */ - -#define REGBASE ((struct tcboxfb *)(ip->regbase)) -#define WINDOWMOVER topcat_windowmove - -void -topcat_init(ip) - struct ite_data *ip; -{ - /* XXX */ - if (ip->regbase == NULL) { - struct grf_data *gp = ip->grf; - - ip->regbase = gp->g_regkva; - ip->fbbase = gp->g_fbkva; - ip->fbwidth = gp->g_display.gd_fbwidth; - ip->fbheight = gp->g_display.gd_fbheight; - ip->dwidth = gp->g_display.gd_dwidth; - ip->dheight = gp->g_display.gd_dheight; - } - - /* - * Catseye looks a lot like a topcat, but not completely. - * So, we set some bits to make it work. - */ - if (REGBASE->fbid != GID_TOPCAT) { - while ((REGBASE->catseye_status & 1)) - ; - REGBASE->catseye_status = 0x0; - REGBASE->vb_select = 0x0; - REGBASE->tcntrl = 0x0; - REGBASE->acntrl = 0x0; - REGBASE->pncntrl = 0x0; - REGBASE->rug_cmdstat = 0x90; - } - - /* - * Determine the number of planes by writing to the first frame - * buffer display location, then reading it back. - */ - REGBASE->wen = ~0; - REGBASE->fben = ~0; - REGBASE->prr = RR_COPY; - *FBBASE = 0xFF; - ip->planemask = *FBBASE; - - /* - * Enable reading/writing of all the planes. - */ - REGBASE->fben = ip->planemask; - REGBASE->wen = ip->planemask; - REGBASE->ren = ip->planemask; - REGBASE->prr = RR_COPY; - - ite_fontinfo(ip); - - /* - * Clear the framebuffer on all planes. - */ - topcat_windowmove(ip, 0, 0, 0, 0, ip->fbheight, ip->fbwidth, RR_CLEAR); - tc_waitbusy(ip->regbase, ip->planemask); - - ite_fontinit(ip); - - /* - * Initialize color map for color displays - */ - if (ip->planemask != 1) { - tc_waitbusy(ip->regbase, ip->planemask); - REGBASE->nblank = 0x01; - - tccm_waitbusy(ip->regbase); - REGBASE->rdata = 0x0; - REGBASE->gdata = 0x0; - REGBASE->bdata = 0x0; - REGBASE->cindex = 0xFF; - REGBASE->strobe = 0xFF; - - DELAY(100); - tccm_waitbusy(ip->regbase); - REGBASE->rdata = 0x0; - REGBASE->gdata = 0x0; - REGBASE->bdata = 0x0; - REGBASE->cindex = 0x0; - - DELAY(100); - tccm_waitbusy(ip->regbase); - REGBASE->rdata = 0xFF; - REGBASE->gdata = 0xFF; - REGBASE->bdata = 0xFF; - REGBASE->cindex = 0xFE; - REGBASE->strobe = 0xFF; - - DELAY(100); - tccm_waitbusy(ip->regbase); - REGBASE->rdata = 0x0; - REGBASE->gdata = 0x0; - REGBASE->bdata = 0x0; - REGBASE->cindex = 0x0; - } - - /* - * Stash the inverted cursor. - */ - topcat_windowmove(ip, charY(ip, ' '), charX(ip, ' '), - ip->cblanky, ip->cblankx, ip->ftheight, - ip->ftwidth, RR_COPYINVERTED); -} - -void -topcat_deinit(ip) - struct ite_data *ip; -{ - topcat_windowmove(ip, 0, 0, 0, 0, ip->fbheight, ip->fbwidth, RR_CLEAR); - tc_waitbusy(ip->regbase, ip->planemask); - - REGBASE->nblank = ~0; - ip->flags &= ~ITE_INITED; -} - -void -topcat_putc(ip, c, dy, dx, mode) - struct ite_data *ip; - int c, dy, dx, mode; -{ - int wmrr = ((mode == ATTR_INV) ? RR_COPYINVERTED : RR_COPY); - - topcat_windowmove(ip, charY(ip, c), charX(ip, c), - dy * ip->ftheight, dx * ip->ftwidth, - ip->ftheight, ip->ftwidth, wmrr); -} - -void -topcat_cursor(ip, flag) - struct ite_data *ip; - int flag; -{ - if (flag == DRAW_CURSOR) - draw_cursor(ip) - else if (flag == MOVE_CURSOR) { - erase_cursor(ip) - draw_cursor(ip) - } - else - erase_cursor(ip) -} - -void -topcat_clear(ip, sy, sx, h, w) - struct ite_data *ip; - int sy, sx, h, w; -{ - topcat_windowmove(ip, sy * ip->ftheight, sx * ip->ftwidth, - sy * ip->ftheight, sx * ip->ftwidth, - h * ip->ftheight, w * ip->ftwidth, - RR_CLEAR); -} - -void -topcat_scroll(ip, sy, sx, count, dir) - struct ite_data *ip; - int sy, count, dir, sx; -{ - int dy; - int dx = sx; - int height = 1; - int width = ip->cols; - - if (dir == SCROLL_UP) { - dy = sy - count; - height = ip->rows - sy; - } - else if (dir == SCROLL_DOWN) { - dy = sy + count; - height = ip->rows - dy - 1; - } - else if (dir == SCROLL_RIGHT) { - dy = sy; - dx = sx + count; - width = ip->cols - dx; - } - else { - dy = sy; - dx = sx - count; - width = ip->cols - sx; - } - - topcat_windowmove(ip, sy * ip->ftheight, sx * ip->ftwidth, - dy * ip->ftheight, dx * ip->ftwidth, - height * ip->ftheight, - width * ip->ftwidth, RR_COPY); -} - -void -topcat_windowmove(ip, sy, sx, dy, dx, h, w, func) - struct ite_data *ip; - int sy, sx, dy, dx, h, w, func; -{ - struct tcboxfb *rp = REGBASE; - - if (h == 0 || w == 0) - return; - tc_waitbusy(ip->regbase, ip->planemask); - rp->wmrr = func; - rp->source_y = sy; - rp->source_x = sx; - rp->dest_y = dy; - rp->dest_x = dx; - rp->wheight = h; - rp->wwidth = w; - rp->wmove = ip->planemask; -} - -/* - * Topcat/catseye console support - */ - -int -topcat_console_scan(scode, va, arg) - int scode; - caddr_t va; - void *arg; -{ - struct grfreg *grf = (struct grfreg *)va; - struct consdev *cp = arg; - u_char *dioiidev; - int force = 0, pri; - - if (grf->gr_id != GRFHWID) - return (0); - - switch (grf->gr_id2) { - case GID_TOPCAT: - case GID_LRCATSEYE: - case GID_HRCCATSEYE: - case GID_HRMCATSEYE: - break; - - default: - return (0); - } - - pri = CN_NORMAL; - -#ifdef CONSCODE - /* - * Raise our priority, if appropriate. - */ - if (scode == CONSCODE) { - pri = CN_REMOTE; - force = conforced = 1; - } -#endif - - /* Only raise priority. */ - if (pri > cp->cn_pri) - cp->cn_pri = pri; - - /* - * If our priority is higher than the currently-remembered - * console, stash our priority. - */ - if (((cn_tab == NULL) || (cp->cn_pri > cn_tab->cn_pri)) || force) { - cn_tab = cp; - if (scode >= 132) { - dioiidev = (u_char *)va; - return ((dioiidev[0x101] + 1) * 0x100000); - } - return (DIO_DEVSIZE); - } - return (0); -} - -void -topcatcnprobe(cp) - struct consdev *cp; -{ - int maj; - caddr_t va; - struct grfreg *grf; - int force = 0; - - maj = ite_major(); - - /* initialize required fields */ - cp->cn_dev = makedev(maj, 0); /* XXX */ - cp->cn_pri = CN_DEAD; - - /* Abort early if the console is already forced. */ - if (conforced) - return; - - /* Look for "internal" framebuffer. */ - va = (caddr_t)IIOV(GRFIADDR); - grf = (struct grfreg *)va; - if (!badaddr(va) && (grf->gr_id == GRFHWID)) { - switch (grf->gr_id2) { - case GID_TOPCAT: - case GID_LRCATSEYE: - case GID_HRCCATSEYE: - case GID_HRMCATSEYE: - cp->cn_pri = CN_INTERNAL; - -#ifdef CONSCODE - /* - * Raise our priority and save some work, - * if appropriate. - */ - if (CONSCODE == -1) { - cp->cn_pri = CN_REMOTE; - force = conforced = 1; - } -#endif - - /* - * If our priority is higher than the currently - * remembered console, stash our priority, and unmap - * whichever device might be currently mapped. - * Since we're internal, we set the saved size to 0 - * so they don't attempt to unmap our fixed VA later. - */ - if (((cn_tab == NULL) || (cp->cn_pri > cn_tab->cn_pri)) - || force) { - cn_tab = cp; - if (convasize) - iounmap(conaddr, convasize); - conscode = -1; - conaddr = va; - convasize = 0; - } - } - } - - console_scan(topcat_console_scan, cp); -} - -void -topcatcninit(cp) - struct consdev *cp; -{ - struct grf_data *gp = &grf_cn; - struct grfreg *grf = (struct grfreg *)conaddr; - - /* - * Initialize the framebuffer hardware. - */ - (void)tc_init(gp, conscode, conaddr); - - /* - * Set up required grf data. - */ - switch (grf->gr_id2) { - case GID_TOPCAT: - gp->g_sw = &topcat_grfsw; - break; - - case GID_LRCATSEYE: - gp->g_sw = &lrcatseye_grfsw; - break; - - case GID_HRCCATSEYE: - gp->g_sw = &hrcatseye_grfsw; - break; - - case GID_HRMCATSEYE: - gp->g_sw = &hrmcatseye_grfsw; - break; - - default: - /* THIS SHOULD NEVER HAPPEN! */ - panic("topcat console: impossible!"); /* XXX won't see it */ - } - gp->g_display.gd_id = gp->g_sw->gd_swid; - gp->g_flags = GF_ALIVE; - - /* - * Initialize the terminal emulator. - */ - itecninit(gp, &topcat_itesw); -} - -#endif /* NITE > 0 */ |