diff options
Diffstat (limited to 'sys/arch/hp300/stand/include/hilreg.h')
| -rw-r--r-- | sys/arch/hp300/stand/include/hilreg.h | 150 |
1 files changed, 0 insertions, 150 deletions
diff --git a/sys/arch/hp300/stand/include/hilreg.h b/sys/arch/hp300/stand/include/hilreg.h deleted file mode 100644 index ef70853fc8d..00000000000 --- a/sys/arch/hp300/stand/include/hilreg.h +++ /dev/null @@ -1,150 +0,0 @@ -/* $OpenBSD: hilreg.h,v 1.2 2006/08/17 06:31:10 miod Exp $ */ -/* $NetBSD: hilreg.h,v 1.6 1997/02/02 09:39:21 thorpej Exp $ */ - -/* - * Copyright (c) 1988 University of Utah. - * Copyright (c) 1990, 1993 - * The Regents of the University of California. All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * the Systems Programming Group of the University of Utah Computer - * Science Department. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - * - * from: Utah $Hdr: hilreg.h 1.10 92/01/21$ - * - * @(#)hilreg.h 8.1 (Berkeley) 6/10/93 - */ - -#include <hp300/dev/iotypes.h> /* XXX */ - -struct hil_dev { - char hil_pad0; - vu_char hil_data; - char hil_pad1; - vu_char hil_cmd; -#define hil_stat hil_cmd -}; - -#define HILADDR ((struct hil_dev *)IIOV(0x428000)) - -#define READHILDATA(x) ((x)->hil_data) -#define READHILSTAT(x) ((x)->hil_stat) -#define READHILCMD(x) ((x)->hil_cmd) -#define WRITEHILDATA(x, y) ((x)->hil_data = (y)) -#define WRITEHILSTAT(x, y) ((x)->hil_stat = (y)) -#define WRITEHILCMD(x, y) ((x)->hil_cmd = (y)) - -#define HIL_BUSY 0x02 -#define HIL_DATA_RDY 0x01 - -#define HILWAIT(hil_dev) while ((READHILSTAT(hil_dev) & HIL_BUSY)) -#define HILDATAWAIT(hil_dev) while (!(READHILSTAT(hil_dev) & HIL_DATA_RDY)) - -/* HIL status bits */ -#define HIL_POLLDATA 0x10 /* HIL poll data follows */ -#define HIL_COMMAND 0x08 /* Start of original command */ -#define HIL_ERROR 0x080 /* HIL error */ -#define HIL_RECONFIG 0x080 /* HIL has reconfigured */ -#define HIL_STATMASK (HIL_DATA | HIL_COMMAND) - -#define HIL_SSHIFT 4 /* Bits to shift status over */ -#define HIL_SMASK 0xF /* Service request status mask */ -#define HIL_DEVMASK 0x07 - -/* HIL status types */ -#define HIL_STATUS 0x5 /* HIL status in data register */ -#define HIL_DATA 0x6 /* HIL data in data register */ -#define HIL_CTRLSHIFT 0x8 /* key + CTRL + SHIFT */ -#define HIL_CTRL 0x9 /* key + CTRL */ -#define HIL_SHIFT 0xA /* key + SHIFT */ -#define HIL_KEY 0xB /* key only */ -#define HIL_68K 0x4 /* Data from the 68k is ready */ - -/* HIL commands */ -#define HIL_SETARD 0xA0 /* set auto-repeat delay */ -#define HIL_SETARR 0xA2 /* set auto-repeat rate */ -#define HIL_SETTONE 0xA3 /* set tone generator */ -#define HIL_CNMT 0xB2 /* clear nmi */ -#define HIL_INTON 0x5C /* Turn on interrupts. */ -#define HIL_INTOFF 0x5D /* Turn off interrupts. */ -#define HIL_TRIGGER 0xC5 /* trigger command */ -#define HIL_STARTCMD 0xE0 /* start loop command */ -#define HIL_TIMEOUT 0xFE /* timeout */ -#define HIL_READTIME 0x13 /* Read real time register */ - -/* Read/write various registers on the 8042. */ -#define HIL_READBUSY 0x02 /* internal "busy" register */ -#define HIL_READKBDLANG 0x12 /* read keyboard language code */ -#define HIL_READKBDSADR 0xF9 -#define HIL_WRITEKBDSADR 0xE9 -#define HIL_READLPSTAT 0xFA -#define HIL_WRITELPSTAT 0xEA -#define HIL_READLPCTRL 0xFB -#define HIL_WRITELPCTRL 0xEB - -/* BUSY bits */ -#define BSY_LOOPBUSY 0x04 - -/* LPCTRL bits */ -#define LPC_AUTOPOLL 0x01 /* enable auto-polling */ -#define LPC_NOERROR 0x02 /* don't report errors */ -#define LPC_NORECONF 0x04 /* don't report reconfigure */ -#define LPC_KBDCOOK 0x10 /* cook all keyboards */ -#define LPC_RECONF 0x80 /* reconfigure the loop */ - -/* LPSTAT bits */ -#define LPS_DEVMASK 0x07 /* number of loop devices */ -#define LPS_CONFGOOD 0x08 /* reconfiguration worked */ -#define LPS_CONFFAIL 0x80 /* reconfiguration failed */ - -/* HIL packet headers */ -#define HIL_MOUSEDATA 0x2 -#define HIL_KBDDATA 0x40 - -#define HIL_MOUSEMOTION 0x02 /* mouse movement event */ -#define HIL_KBDBUTTON 0x40 /* keyboard button event */ -#define HIL_MOUSEBUTTON 0x40 /* mouse button event */ -#define HIL_BUTTONBOX 0x60 /* button box event */ -#define HIL_TABLET 0x02 /* tablet motion event */ -#define HIL_KNOBBOX 0x03 /* knob box motion data */ - -/* For setting auto repeat on the keyboard */ -#define ar_format(x) ~((x - 10) / 10) -#define KBD_ARD 400 /* initial delay in msec (10 - 2560) */ -#define KBD_ARR 60 /* rate (10 - 2550 msec, 2551 == off) */ - -/* Magic */ -#define KBDNMISTAT ((volatile char *)IIOV(0x478005)) -#define KBDNMI 0x04 - -/* keyboard status */ -#define KBD_CHARMASK 0x7F -#define KBD_CTRLSHIFT 0x8 /* key + CTRL + SHIFT */ -#define KBD_CTRL 0x9 /* key + CTRL */ -#define KBD_SHIFT 0xA /* key + SHIFT */ -#define KBD_KEY 0xB /* key only */ - |