diff options
Diffstat (limited to 'sys/arch/i386')
| -rw-r--r-- | sys/arch/i386/include/ioctl_bt848.h | 76 |
1 files changed, 56 insertions, 20 deletions
diff --git a/sys/arch/i386/include/ioctl_bt848.h b/sys/arch/i386/include/ioctl_bt848.h index 6c385a1f909..6cd8253001f 100644 --- a/sys/arch/i386/include/ioctl_bt848.h +++ b/sys/arch/i386/include/ioctl_bt848.h @@ -1,8 +1,9 @@ -/* $OpenBSD: ioctl_bt848.h,v 1.2 1998/10/10 06:40:21 downsj Exp $ */ +/* $OpenBSD: ioctl_bt848.h,v 1.3 1999/08/05 21:18:43 niklas Exp $ */ + /* * extensions to ioctl_meteor.h for the bt848 cards * - * $FreeBSD: ioctl_bt848.h,v 1.19 1998/09/30 21:06:55 sos Exp $ + * $Roger: ioctl_bt848.h,v 1.23 1999/05/18 12:14:39 roger Exp $ */ /* @@ -15,8 +16,9 @@ #define CHNLSET_JPNBCST 5 #define CHNLSET_JPNCABLE 6 #define CHNLSET_XUSSR 7 +#define CHNLSET_AUSTRALIA 8 #define CHNLSET_MIN CHNLSET_NABCST -#define CHNLSET_MAX CHNLSET_XUSSR +#define CHNLSET_MAX CHNLSET_AUSTRALIA /* @@ -102,7 +104,7 @@ struct eeProm { #define TVTUNER_GETSTATUS _IOR('x', 34, unsigned int) /* get tuner status */ #define TVTUNER_SETFREQ _IOW('x', 35, unsigned int) /* set frequency */ #define TVTUNER_GETFREQ _IOR('x', 36, unsigned int) /* get frequency */ - + #define BT848_SHUE _IOW('x', 37, int) /* set hue */ #define BT848_GHUE _IOR('x', 37, int) /* get hue */ @@ -137,6 +139,24 @@ struct eeProm { #define BT848_SLNOTCH _IOW('x', 55, int) /* set luma notch */ #define BT848_GLNOTCH _IOR('x', 56, int) /* get luma notch */ +/* Read/Write the BT848's I2C bus directly + * b7-b0: data (read/write) + * b15-b8: internal peripheral register (write) + * b23-b16: i2c addr (write) + * b31-b24: 1 = write, 0 = read + */ +#define BT848_I2CWR _IOWR('x', 57, u_long) /* i2c read-write */ + +/* Support for radio tuner */ +#define RADIO_SETMODE _IOW('x', 58, unsigned int) /* set radio modes */ +#define RADIO_GETMODE _IOR('x', 58, unsigned char) /* get radio modes */ +#define RADIO_AFC 0x01 /* These modes will probably not */ +#define RADIO_MONO 0x02 /* work on the FRxxxx. It does */ +#define RADIO_MUTE 0x08 /* work on the FMxxxx. */ +#define RADIO_SETFREQ _IOW('x', 59, unsigned int) /* set frequency */ +#define RADIO_GETFREQ _IOR('x', 59, unsigned int) /* set frequency */ + /* Argument is frequency*100MHz */ + /* * XXX: more bad magic, * we need to fix the METEORGINPUT to return something public @@ -145,7 +165,8 @@ struct eeProm { #define METEOR_DEV0 0x00001000 #define METEOR_DEV1 0x00002000 #define METEOR_DEV2 0x00004000 - +#define METEOR_DEV3 0x00008000 +#define METEOR_DEV_SVIDEO 0x00006000 /* * right now I don't know were to put these, but as they are suppose to be * a part of a common video capture interface, these should be relocated to @@ -217,22 +238,37 @@ struct bktr_capture_area { #define BT848_SCAPAREA _IOW('x', 69, struct bktr_capture_area) #define BT848_GCAPAREA _IOR('x', 69, struct bktr_capture_area) -/* Read/Write the BT848's I2C bus directly - * b7-b0: data (read/write) - * b15-b8: internal peripheral register (write) - * b23-b16: i2c addr (write) - * b31-b24: 1 = write, 0 = read + +/* Get channel Set */ +#define BT848_MAX_CHNLSET_NAME_LEN 16 +struct bktr_chnlset { + short index; + short max_channel; + char name[BT848_MAX_CHNLSET_NAME_LEN]; +}; +#define TVTUNER_GETCHNLSET _IOWR('x', 70, struct bktr_chnlset) + + + +/* Infra Red Remote Control */ +struct bktr_remote { + unsigned char data[3]; +}; +#define REMOTE_GETKEY _IOR('x', 71, struct bktr_remote)/*read the remote */ + /*control receiver*/ + /*returns raw data*/ + + +/* + * Direct access to GPIO pins. You must add BKTR_GPIO_ACCESS to your kernel + * configuration file to use these */ -#define BT848_I2CWR _IOWR('x', 57, u_long) /* i2c read-write */ -/* Support for radio tuner */ -#define RADIO_SETMODE _IOW('x', 58, unsigned int) /* set radio modes */ -#define RADIO_GETMODE _IOR('x', 58, unsigned char) /* get radio modes */ -#define RADIO_AFC 0x01 /* These modes will probably not */ -#define RADIO_MONO 0x02 /* work on the FRxxxx. It does */ -#define RADIO_MUTE 0x08 /* work on the FMxxxx. */ -#define RADIO_SETFREQ _IOW('x', 59, unsigned int) /* set frequency */ -#define RADIO_GETFREQ _IOR('x', 59, unsigned int) /* set frequency */ - /* Argument is frequency*100MHz */ +#define BT848_GPIO_SET_EN _IOW('x', 72, int) /* set gpio_out_en */ +#define BT848_GPIO_GET_EN _IOR('x', 73, int) /* get gpio_out_en */ +#define BT848_GPIO_SET_DATA _IOW('x', 74, int) /* set gpio_data */ +#define BT848_GPIO_GET_DATA _IOR('x', 75, int) /* get gpio_data */ + + /* XXX - Copied from /sys/pci/brktree_reg.h */ #define BT848_IFORM_FORMAT (0x7<<0) |