diff options
Diffstat (limited to 'sys/arch/vax/mscp/mscp.h')
| -rw-r--r-- | sys/arch/vax/mscp/mscp.h | 352 |
1 files changed, 176 insertions, 176 deletions
diff --git a/sys/arch/vax/mscp/mscp.h b/sys/arch/vax/mscp/mscp.h index ffae864af27..1c74b6f7388 100644 --- a/sys/arch/vax/mscp/mscp.h +++ b/sys/arch/vax/mscp/mscp.h @@ -1,5 +1,5 @@ -/* $OpenBSD: mscp.h,v 1.3 1997/09/12 09:25:51 maja Exp $ */ -/* $NetBSD: mscp.h,v 1.3 1997/07/04 11:58:21 ragge Exp $ */ +/* $OpenBSD: mscp.h,v 1.4 2000/04/27 03:14:46 bjc Exp $ */ +/* $NetBSD: mscp.h,v 1.6 1999/05/29 19:11:16 ragge Exp $ */ /* * Copyright (c) 1988 Regents of the University of California. @@ -48,178 +48,178 @@ /* * Control message opcodes */ -#define M_OP_ABORT 0x01 /* Abort command */ -#define M_OP_GETCMDST 0x02 /* Get command status command */ -#define M_OP_GETUNITST 0x03 /* Get unit status command */ -#define M_OP_SETCTLRC 0x04 /* Set controller characteristics command */ -#define M_OP_SEREX 0x07 /* Serious exception end message */ -#define M_OP_AVAILABLE 0x08 /* Available command */ -#define M_OP_ONLINE 0x09 /* Online command */ -#define M_OP_SETUNITC 0x0a /* Set unit characteristics command */ -#define M_OP_DTACCPATH 0x0b /* Determine access paths command */ -#define M_OP_ACCESS 0x10 /* Access command */ -#define M_OP_COMPCD 0x11 /* Compare controller data command */ -#define M_OP_ERASE 0x12 /* Erase command */ -#define M_OP_FLUSH 0x13 /* Flush command */ -#define M_OP_REPLACE 0x14 /* Replace command */ -#define M_OP_COMPHD 0x20 /* Compare host data command */ -#define M_OP_READ 0x21 /* Read command */ -#define M_OP_WRITE 0x22 /* Write command */ -#define M_OP_WRITM 0x24 /* Write mark command */ -#define M_OP_POS 0x25 /* Positioning command */ -#define M_OP_AVAILATTN 0x40 /* Available attention message */ -#define M_OP_DUPUNIT 0x41 /* Duplicate unit number attention message */ -#define M_OP_ACCPATH 0x42 /* Access path attention message */ -#define M_OP_END 0x80 /* End message flag */ +#define M_OP_ABORT 0x01 /* Abort command */ +#define M_OP_GETCMDST 0x02 /* Get command status command */ +#define M_OP_GETUNITST 0x03 /* Get unit status command */ +#define M_OP_SETCTLRC 0x04 /* Set controller characteristics command */ +#define M_OP_SEREX 0x07 /* Serious exception end message */ +#define M_OP_AVAILABLE 0x08 /* Available command */ +#define M_OP_ONLINE 0x09 /* Online command */ +#define M_OP_SETUNITC 0x0a /* Set unit characteristics command */ +#define M_OP_DTACCPATH 0x0b /* Determine access paths command */ +#define M_OP_ACCESS 0x10 /* Access command */ +#define M_OP_COMPCD 0x11 /* Compare controller data command */ +#define M_OP_ERASE 0x12 /* Erase command */ +#define M_OP_FLUSH 0x13 /* Flush command */ +#define M_OP_REPLACE 0x14 /* Replace command */ +#define M_OP_COMPHD 0x20 /* Compare host data command */ +#define M_OP_READ 0x21 /* Read command */ +#define M_OP_WRITE 0x22 /* Write command */ +#define M_OP_WRITM 0x24 /* Write mark command */ +#define M_OP_POS 0x25 /* Positioning command */ +#define M_OP_AVAILATTN 0x40 /* Available attention message */ +#define M_OP_DUPUNIT 0x41 /* Duplicate unit number attention message */ +#define M_OP_ACCPATH 0x42 /* Access path attention message */ +#define M_OP_END 0x80 /* End message flag */ /* * Generic command modifiers */ -#define M_MD_EXPRS 0x8000 /* Express request */ -#define M_MD_COMP 0x4000 /* Compare */ -#define M_MD_CLSEX 0x2000 /* Clear serious exception */ -#define M_MD_ERROR 0x1000 /* Force error */ -#define M_MD_SCCHH 0x0800 /* Suppress caching (high speed) */ -#define M_MD_SCCHL 0x0400 /* Suppress caching (low speed) */ -#define M_MD_SECOR 0x0200 /* Suppress error correction */ -#define M_MD_SEREC 0x0100 /* Suppress error recovery */ -#define M_MD_SSHDW 0x0080 /* Suppress shadowing */ -#define M_MD_WBKNV 0x0040 /* Write back (non-volatile) */ -#define M_MD_WBKVL 0x0020 /* Write back (volatile) */ -#define M_MD_WRSEQ 0x0010 /* Write shadow set one unit at a time */ +#define M_MD_EXPRS 0x8000 /* Express request */ +#define M_MD_COMP 0x4000 /* Compare */ +#define M_MD_CLSEX 0x2000 /* Clear serious exception */ +#define M_MD_ERROR 0x1000 /* Force error */ +#define M_MD_SCCHH 0x0800 /* Suppress caching (high speed) */ +#define M_MD_SCCHL 0x0400 /* Suppress caching (low speed) */ +#define M_MD_SECOR 0x0200 /* Suppress error correction */ +#define M_MD_SEREC 0x0100 /* Suppress error recovery */ +#define M_MD_SSHDW 0x0080 /* Suppress shadowing */ +#define M_MD_WBKNV 0x0040 /* Write back (non-volatile) */ +#define M_MD_WBKVL 0x0020 /* Write back (volatile) */ +#define M_MD_WRSEQ 0x0010 /* Write shadow set one unit at a time */ /* * tape command modifiers */ -#define M_MD_IMMEDIATE 0x0040 /* Immediate completion */ -#define M_MD_UNLOAD 0x0010 /* Unload tape */ -#define M_MD_REVERSE 0x0008 /* Reverse action */ -#define M_MD_OBJCOUNT 0x0004 /* Object count */ -#define M_MD_REWIND 0x0002 /* Rewind */ +#define M_MD_IMMEDIATE 0x0040 /* Immediate completion */ +#define M_MD_UNLOAD 0x0010 /* Unload tape */ +#define M_MD_REVERSE 0x0008 /* Reverse action */ +#define M_MD_OBJCOUNT 0x0004 /* Object count */ +#define M_MD_REWIND 0x0002 /* Rewind */ /* * AVAILABLE command modifiers */ -#define M_AVM_ALLCD 0x0002 /* All class drivers */ -#define M_AVM_SPINDOWN 0x0001 /* Spin down */ +#define M_AVM_ALLCD 0x0002 /* All class drivers */ +#define M_AVM_SPINDOWN 0x0001 /* Spin down */ /* * FLUSH command modifiers */ -#define M_FLM_FLUSHENU 0x0001 /* Flush entire unit */ -#define M_FLM_VOLATILE 0x0002 /* Volatile only */ +#define M_FLM_FLUSHENU 0x0001 /* Flush entire unit */ +#define M_FLM_VOLATILE 0x0002 /* Volatile only */ /* * GET UNIT STATUS command modifiers */ -#define M_GUM_NEXTUNIT 0x0001 /* Next unit */ +#define M_GUM_NEXTUNIT 0x0001 /* Next unit */ /* * ONLINE command modifiers */ -#define M_OLM_RIP 0x0001 /* Allow self destruction */ -#define M_OLM_IGNMF 0x0002 /* Ignore media format error */ +#define M_OLM_RIP 0x0001 /* Allow self destruction */ +#define M_OLM_IGNMF 0x0002 /* Ignore media format error */ /* * ONLINE and SET UNIT CHARACTERISTICS command modifiers */ -#define M_OSM_ALTERHI 0x0020 /* Alter host identifier */ -#define M_OSM_SHADOWSP 0x0010 /* Shadow unit specified */ -#define M_OSM_CLEARWBL 0x0008 /* Clear write-back data lost */ -#define M_OSM_SETWRPROT 0x0004 /* Set write protect */ +#define M_OSM_ALTERHI 0x0020 /* Alter host identifier */ +#define M_OSM_SHADOWSP 0x0010 /* Shadow unit specified */ +#define M_OSM_CLEARWBL 0x0008 /* Clear write-back data lost */ +#define M_OSM_SETWRPROT 0x0004 /* Set write protect */ /* * REPLACE command modifiers */ -#define M_RPM_PRIMARY 0x0001 /* Primary replacement block */ +#define M_RPM_PRIMARY 0x0001 /* Primary replacement block */ /* * End message flags */ -#define M_EF_BBLKR 0x80 /* Bad block reported */ -#define M_EF_BBLKU 0x40 /* Bad block unreported */ -#define M_EF_ERLOG 0x20 /* Error log generated */ -#define M_EF_SEREX 0x10 /* Serious exception */ -#define M_EF_EOT 0x08 /* at end-of-tape */ -#define M_EF_POSLOST 0x04 /* position lost */ +#define M_EF_BBLKR 0x80 /* Bad block reported */ +#define M_EF_BBLKU 0x40 /* Bad block unreported */ +#define M_EF_ERLOG 0x20 /* Error log generated */ +#define M_EF_SEREX 0x10 /* Serious exception */ +#define M_EF_EOT 0x08 /* at end-of-tape */ +#define M_EF_POSLOST 0x04 /* position lost */ /* * Controller flags */ -#define M_CF_ATTN 0x80 /* Enable attention messages */ -#define M_CF_MISC 0x40 /* Enable miscellaneous error log messages */ -#define M_CF_OTHER 0x20 /* Enable other host's error log messages */ -#define M_CF_THIS 0x10 /* Enable this host's error log messages */ -#define M_CF_MLTHS 0x04 /* Multi-host */ -#define M_CF_SHADW 0x02 /* Shadowing */ -#define M_CF_576 0x01 /* 576 byte sectors */ +#define M_CF_ATTN 0x80 /* Enable attention messages */ +#define M_CF_MISC 0x40 /* Enable miscellaneous error log messages */ +#define M_CF_OTHER 0x20 /* Enable other host's error log messages */ +#define M_CF_THIS 0x10 /* Enable this host's error log messages */ +#define M_CF_MLTHS 0x04 /* Multi-host */ +#define M_CF_SHADW 0x02 /* Shadowing */ +#define M_CF_576 0x01 /* 576 byte sectors */ /* * Unit flags */ -#define M_UF_REPLC 0x8000 /* Controller initiated bad block replacement */ -#define M_UF_INACT 0x4000 /* Inactive shadow set unit */ -#define M_UF_WRTPH 0x2000 /* Write protect (hardware) */ -#define M_UF_WRTPS 0x1000 /* Write protect (software or volume) */ -#define M_UF_SCCHH 0x8000 /* Suppress caching (high speed) */ -#define M_UF_SCCHL 0x4000 /* Suppress caching (low speed) */ -#define M_UF_RMVBL 0x0080 /* Removable media */ -#define M_UF_WBKNV 0x0040 /* Write back (non-volatile) */ -#define M_UF_576 0x0004 /* 576 byte sectors */ -#define M_UF_CMPWR 0x0002 /* Compare writes */ -#define M_UF_CMPRD 0x0001 /* Compare reads */ +#define M_UF_REPLC 0x8000 /* Controller initiated bad block replacement */ +#define M_UF_INACT 0x4000 /* Inactive shadow set unit */ +#define M_UF_WRTPH 0x2000 /* Write protect (hardware) */ +#define M_UF_WRTPS 0x1000 /* Write protect (software or volume) */ +#define M_UF_SCCHH 0x8000 /* Suppress caching (high speed) */ +#define M_UF_SCCHL 0x4000 /* Suppress caching (low speed) */ +#define M_UF_RMVBL 0x0080 /* Removable media */ +#define M_UF_WBKNV 0x0040 /* Write back (non-volatile) */ +#define M_UF_576 0x0004 /* 576 byte sectors */ +#define M_UF_CMPWR 0x0002 /* Compare writes */ +#define M_UF_CMPRD 0x0001 /* Compare reads */ /* * Error Log message format codes */ -#define M_FM_CTLRERR 0x00 /* Controller error */ -#define M_FM_BUSADDR 0x01 /* Host memory access error */ -#define M_FM_DISKTRN 0x02 /* Disk transfer error */ -#define M_FM_SDI 0x03 /* SDI error */ -#define M_FM_SMLDSK 0x04 /* Small disk error */ -#define M_FM_TAPETRN 0x05 /* Tape transfer error */ -#define M_FM_STIERR 0x06 /* STI communication or command failure */ -#define M_FM_STIDEL 0x07 /* STI drive error log */ -#define M_FM_STIFEL 0x08 /* STI formatter error log */ +#define M_FM_CTLRERR 0x00 /* Controller error */ +#define M_FM_BUSADDR 0x01 /* Host memory access error */ +#define M_FM_DISKTRN 0x02 /* Disk transfer error */ +#define M_FM_SDI 0x03 /* SDI error */ +#define M_FM_SMLDSK 0x04 /* Small disk error */ +#define M_FM_TAPETRN 0x05 /* Tape transfer error */ +#define M_FM_STIERR 0x06 /* STI communication or command failure */ +#define M_FM_STIDEL 0x07 /* STI drive error log */ +#define M_FM_STIFEL 0x08 /* STI formatter error log */ /* * Error Log message flags */ -#define M_LF_SUCC 0x80 /* Operation successful */ -#define M_LF_CONT 0x40 /* Operation continuing */ -#define M_LF_SQNRS 0x01 /* Sequence number reset */ +#define M_LF_SUCC 0x80 /* Operation successful */ +#define M_LF_CONT 0x40 /* Operation continuing */ +#define M_LF_SQNRS 0x01 /* Sequence number reset */ /* * Status codes */ -#define M_ST_MASK 0x1f /* Status code mask */ -#define M_ST_SUCCESS 0x00 /* Success */ -#define M_ST_INVALCMD 0x01 /* Invalid command */ -#define M_ST_ABORTED 0x02 /* Command aborted */ -#define M_ST_OFFLINE 0x03 /* Unit offline */ -#define M_ST_AVAILABLE 0x04 /* Unit available */ -#define M_ST_MFMTERR 0x05 /* Media format error */ -#define M_ST_WRPROT 0x06 /* Write protected */ -#define M_ST_COMPERR 0x07 /* Compare error */ -#define M_ST_DATAERR 0x08 /* Data error */ -#define M_ST_HOSTBUFERR 0x09 /* Host buffer access error */ -#define M_ST_CTLRERR 0x0a /* Controller error */ -#define M_ST_DRIVEERR 0x0b /* Drive error */ -#define M_ST_FORMATTERR 0x0c /* Formatter error */ -#define M_ST_BOT 0x0d /* Beginning-of-tape */ -#define M_ST_TAPEMARK 0x0e /* Tape mark encountered */ -#define M_ST_RDTRUNC 0x10 /* Record data truncated */ -#define M_ST_DIAG 0x1f /* Message from an internal diagnostic */ +#define M_ST_MASK 0x1f /* Status code mask */ +#define M_ST_SUCCESS 0x00 /* Success */ +#define M_ST_INVALCMD 0x01 /* Invalid command */ +#define M_ST_ABORTED 0x02 /* Command aborted */ +#define M_ST_OFFLINE 0x03 /* Unit offline */ +#define M_ST_AVAILABLE 0x04 /* Unit available */ +#define M_ST_MFMTERR 0x05 /* Media format error */ +#define M_ST_WRPROT 0x06 /* Write protected */ +#define M_ST_COMPERR 0x07 /* Compare error */ +#define M_ST_DATAERR 0x08 /* Data error */ +#define M_ST_HOSTBUFERR 0x09 /* Host buffer access error */ +#define M_ST_CTLRERR 0x0a /* Controller error */ +#define M_ST_DRIVEERR 0x0b /* Drive error */ +#define M_ST_FORMATTERR 0x0c /* Formatter error */ +#define M_ST_BOT 0x0d /* Beginning-of-tape */ +#define M_ST_TAPEMARK 0x0e /* Tape mark encountered */ +#define M_ST_RDTRUNC 0x10 /* Record data truncated */ +#define M_ST_DIAG 0x1f /* Message from an internal diagnostic */ /* * Subcodes of M_ST_OFFLINE */ -#define M_OFFLINE_UNKNOWN (0 << 5) /* unknown or on other ctlr */ -#define M_OFFLINE_UNMOUNTED (1 << 5) /* unmounted or RUN/STOP at STOP */ -#define M_OFFLINE_INOPERATIVE (2 << 5) /* inoperative? */ -#define M_OFFLINE_DUPLICATE (4 << 5) /* duplicate unit number */ -#define M_OFFLINE_INDIAGNOSTIC (8 << 5) /* disabled by FS or diagnostic */ +#define M_OFFLINE_UNKNOWN (0 << 5) /* unknown or on other ctlr */ +#define M_OFFLINE_UNMOUNTED (1 << 5) /* unmounted or RUN/STOP at STOP */ +#define M_OFFLINE_INOPERATIVE (2 << 5) /* inoperative? */ +#define M_OFFLINE_DUPLICATE (4 << 5) /* duplicate unit number */ +#define M_OFFLINE_INDIAGNOSTIC (8 << 5) /* disabled by FS or diagnostic */ /* * An MSCP packet begins with a header giving the length of @@ -237,13 +237,13 @@ */ struct mscpv_seq { long seq_bytecount; /* byte count */ -#define seq_rbn seq_bytecount /* aka RBN (replace) */ -#define seq_outref seq_bytecount /* aka outref (abort/get cmd status) */ +#define seq_rbn seq_bytecount /* aka RBN (replace) */ +#define seq_outref seq_bytecount /* aka outref (abort/get cmd status) */ long seq_buffer; /* buffer descriptor */ long seq_mapbase; /* page map (first PTE) phys address */ - long seq_xxx1; /* ? */ /* unused */ + long seq_xxx1; /* ? */ /* unused */ long seq_lbn; /* logical block number */ - long seq_xxx2; /* ? */ /* unused */ + long seq_xxx2; /* ? */ /* unused */ long *seq_addr; /* pointer to cmd descriptor */ long seq_software[4]; /* reserved to software; unused */ }; @@ -252,10 +252,10 @@ struct mscpv_seq { * Set Controller Characteristics command variant */ struct mscpv_sccc { - u_short sccc_version; /* MSCP version number */ - u_short sccc_ctlrflags; /* controller flags */ - u_short sccc_hosttimo; /* host timeout */ - u_short sccc_usefrac; /* use fraction */ + u_short sccc_version; /* MSCP version number */ + u_short sccc_ctlrflags; /* controller flags */ + u_short sccc_hosttimo; /* host timeout */ + u_short sccc_usefrac; /* use fraction */ long sccc_time; /* time and date */ long sccc_time1; /* it's a quad field */ long sccc_errlgfl; /* ? */ @@ -267,10 +267,10 @@ struct mscpv_sccc { * Set Controller Characteristics end variant */ struct mscpv_scce { - u_short scce_version; /* MSCP version number */ - u_short scce_ctlrflags; /* controller flags */ - u_short scce_ctlrtimo; /* controller timeout */ - u_short scce_ctlrcmdl; /* ??? */ + u_short scce_version; /* MSCP version number */ + u_short scce_ctlrflags; /* controller flags */ + u_short scce_ctlrtimo; /* controller timeout */ + u_short scce_ctlrcmdl; /* ??? */ quad_t scce_ctlrid; /* controller ID */ long scce_xxx[3]; /* ? */ long scce_volser; /* volume serial number */ @@ -291,7 +291,7 @@ struct mscpv_onlc { */ struct mscpv_onle { long onle_xxx1[3]; /* ? */ -/*???*/ short onle_xxx2; /* ? */ +/*???*/ short onle_xxx2; /* ? */ u_char onle_drivetype; /* drive type index (same in guse) */ char onle_xxx3; /* ? */ long onle_mediaid; /* media type id (same in guse) */ @@ -304,8 +304,8 @@ struct mscpv_onle { * Get Unit Status end variant (and Avail Attn?) */ struct mscpv_guse { - u_short guse_multunit; /* multi-unit code */ - u_short guse_unitflags; /* unit flags */ + u_short guse_multunit; /* multi-unit code */ + u_short guse_unitflags; /* unit flags */ long guse_hostid; /* host id */ long guse_unitid0; /*???*/ short guse_unitid1; /*???*/ @@ -314,11 +314,11 @@ struct mscpv_guse { long guse_mediaid; /* media type id (encoded) */ short guse_shadowunit; /* shadow unit */ short guse_shadowstat; /* shadow status */ - u_short guse_nspt; /* sectors per track */ - u_short guse_group; /* track group size */ - u_short guse_ngpc; /* groups per cylinder */ - u_short guse_xxx; /* reserved */ - u_short guse_rctsize; /* RCT size (sectors) */ + u_short guse_nspt; /* sectors per track */ + u_short guse_group; /* track group size */ + u_short guse_ngpc; /* groups per cylinder */ + u_short guse_xxx; /* reserved */ + u_short guse_rctsize; /* RCT size (sectors) */ u_char guse_nrpt; /* RBNs per track */ u_char guse_nrct; /* number of RCTs */ }; @@ -328,23 +328,23 @@ struct mscpv_guse { * type in the top 10 bits, and the drive type in the remaining 22. * The 10 bits, and 15 of the 22, are in groups of 5, with the value * 0 representing space and values 1..26 representing A..Z. The low - * 7 bits represent a number in 0..127. Hence an RA81 on a UDA50 - * is <D><U><R><A>< >81, or 0x25641051. This encoding scheme is known + * 7 bits represent a number in 0..127. Hence an RA81 on a UDA50 + * is <D><U><R><A>< >81, or 0x25641051. This encoding scheme is known * in part in uda.c. * * The casts below are just to make pcc generate better code. */ -#define MSCP_MEDIA_PORT(id) (((long)(id) >> 22) & 0x3ff) /* port */ -#define MSCP_MEDIA_DRIVE(id) ((long)(id) & 0x003fffff) /* drive */ -#define MSCP_MID_ECH(n, id) (((long)(id) >> ((n) * 5 + 7)) & 0x1f) -#define MSCP_MID_CHAR(n, id) \ +#define MSCP_MEDIA_PORT(id) (((long)(id) >> 22) & 0x3ff) /* port */ +#define MSCP_MEDIA_DRIVE(id) ((long)(id) & 0x003fffff) /* drive */ +#define MSCP_MID_ECH(n, id) (((int)(id) >> ((n) * 5 + 7)) & 0x1f) +#define MSCP_MID_CHAR(n, id) \ (MSCP_MID_ECH(n, id) ? MSCP_MID_ECH(n, id) + '@' : ' ') -#define MSCP_MID_NUM(id) ((id) & 0x7f) +#define MSCP_MID_NUM(id) ((id) & 0x7f) /* for, e.g., RA81 */ -#define MSCP_MKDRIVE2(a, b, n) \ +#define MSCP_MKDRIVE2(a, b, n) \ (((a) - '@') << 17 | ((b) - '@') << 12 | (n)) /* for, e.g., RRD50 */ -#define MSCP_MKDRIVE3(a, b, c, n) \ +#define MSCP_MKDRIVE3(a, b, c, n) \ (((a) - '@') << 17 | ((b) - '@') << 12 | ((c) - '@') << 7 | (n)) /* @@ -354,22 +354,22 @@ struct mscpv_erd { quad_t erd_ctlrid; /* controller ID */ u_char erd_ctlrsoftware; /* controller software version */ u_char erd_ctlrhardware; /* controller hardware version */ - u_short erd_multiunit; /* multi-unit code (?) */ + u_short erd_multiunit; /* multi-unit code (?) */ union { u_long un_busaddr; /* bus address, if mem access err */ quad_t un_unitid; /* unit id, otherwise */ } erd_un1; -#define erd_busaddr erd_un1.un_busaddr -#define erd_unitid erd_un1.un_unitid +#define erd_busaddr erd_un1.un_busaddr +#define erd_unitid erd_un1.un_unitid u_char erd_unitsoftware; /* unit software version */ u_char erd_unithardware; /* unit hardware version */ union { u_char un_b[2]; /* level, retry (if disk xfer err) */ - u_short un_s; /* cylinder (if small disk error) */ + u_short un_s; /* cylinder (if small disk error) */ } erd_un2; -#define erd_level erd_un2.un_b[0] -#define erd_retry erd_un2.un_b[1] -#define erd_sdecyl erd_un2.un_s +#define erd_level erd_un2.un_b[0] +#define erd_retry erd_un2.un_b[1] +#define erd_sdecyl erd_un2.un_s long erd_volser; /* volume serial number */ u_long erd_hdr; /* `header' (block number) */ u_char erd_sdistat[12]; /* SDI status information (?) */ @@ -378,23 +378,23 @@ struct mscpv_erd { /* * I am making brash assumptions about the first four bytes of all * MSCP packets. These appear to be true for both UDA50s and TMSCP - * devices (TU81, TA81, TK50). DEC claim that these four bytes are + * devices (TU81, TA81, TK50). DEC claim that these four bytes are * not part of MSCP itself, yet at least the length is necessary * for, e.g., error checking. */ struct mscp { - u_short mscp_msglen; /* length in bytes */ + u_short mscp_msglen; /* length in bytes */ u_char mscp_msgtc; /* type (high 4 bits) and credits */ u_char mscp_vcid; /* virtual circuit ID */ long mscp_cmdref; /* command reference number */ - u_short mscp_unit; /* unit number */ - u_short mscp_seqnum; /* sequence number */ + u_short mscp_unit; /* unit number */ + u_short mscp_seqnum; /* sequence number */ u_char mscp_opcode; /* opcode */ -#define mscp_format mscp_opcode /* aka format (datagrams) */ +#define mscp_format mscp_opcode /* aka format (datagrams) */ u_char mscp_flags; /* flags */ - u_short mscp_modifier; /* modifier (commands) */ -#define mscp_status mscp_modifier /* aka status (ends) */ -#define mscp_event mscp_modifier /* aka event (datagrams) */ + u_short mscp_modifier; /* modifier (commands) */ +#define mscp_status mscp_modifier /* aka status (ends) */ +#define mscp_event mscp_modifier /* aka event (datagrams) */ union { struct mscpv_seq un_seq; /* generic sequential msg */ struct mscpv_sccc un_sccc; /* SCC command */ @@ -404,14 +404,14 @@ struct mscp { struct mscpv_guse un_guse; /* get unit status */ struct mscpv_erd un_erd; /* error datagram */ } mscp_un; -/*???*/ long mscp_xxx; /* pad to 64 bytes */ +/*???*/ long mscp_xxx; /* pad to 64 bytes */ }; /* * Define message length according to the DEC specifications by dropping * the four byte header. */ -#define MSCP_MSGLEN (sizeof (struct mscp) - 4) +#define MSCP_MSGLEN (sizeof (struct mscp) - 4) /* * Shorthand @@ -420,53 +420,53 @@ struct mscp { /* * Generic packet */ -#define mscp_seq mscp_un.un_seq +#define mscp_seq mscp_un.un_seq /* * Set Controller Characteristics packet */ -#define mscp_sccc mscp_un.un_sccc +#define mscp_sccc mscp_un.un_sccc /* * Set Controller Characteristics end packet */ -#define mscp_scce mscp_un.un_scce +#define mscp_scce mscp_un.un_scce /* * Online / Set Unit Characteristics command packet */ -#define mscp_onlc mscp_un.un_onlc +#define mscp_onlc mscp_un.un_onlc /* * Online end packet */ -#define mscp_onle mscp_un.un_onle +#define mscp_onle mscp_un.un_onle /* * Get Unit Status end packet */ -#define mscp_guse mscp_un.un_guse +#define mscp_guse mscp_un.un_guse /* * MSCP Error Log packet */ -#define mscp_erd mscp_un.un_erd +#define mscp_erd mscp_un.un_erd /* * MSCP seq_addr field actually belongs to overall packet. */ -#define mscp_addr mscp_seq.seq_addr +#define mscp_addr mscp_seq.seq_addr /* * Macros to break up mscp_msgtc, and types. */ -#define MSCP_MSGTYPE(m) ((m) & 0xf0) -#define MSCP_CREDITS(m) ((m) & 0x0f) +#define MSCP_MSGTYPE(m) ((m) & 0xf0) +#define MSCP_CREDITS(m) ((m) & 0x0f) -#define MSCPT_SEQ 0x00 /* sequential message */ -#define MSCPT_DATAGRAM 0x10 /* error datagram */ -#define MSCPT_CREDITS 0x20 /* credit notification */ -#define MSCPT_MAINTENANCE 0xf0 /* who knows */ +#define MSCPT_SEQ 0x00 /* sequential message */ +#define MSCPT_DATAGRAM 0x10 /* error datagram */ +#define MSCPT_CREDITS 0x20 /* credit notification */ +#define MSCPT_MAINTENANCE 0xf0 /* who knows */ /* @@ -474,7 +474,7 @@ struct mscp { */ /* - * MSCP controllers have `command rings' and `response rings'. A + * MSCP controllers have `command rings' and `response rings'. A * command ring is a pool of MSCP packets that the host uses to give * commands to the controller; a response ring is a pool of MSCP * packets that the controller uses to give back responses. Entries @@ -490,5 +490,5 @@ struct mscp { * The pool is `described' by a set of pointers to the packets, along * with the two flags below. */ -#define MSCP_OWN 0x80000000 /* controller owns this packet */ -#define MSCP_INT 0x40000000 /* controller should interrupt */ +#define MSCP_OWN 0x80000000 /* controller owns this packet */ +#define MSCP_INT 0x40000000 /* controller should interrupt */ |