summaryrefslogtreecommitdiff
path: root/sys/arch
diff options
context:
space:
mode:
Diffstat (limited to 'sys/arch')
-rw-r--r--sys/arch/moko/Makefile39
-rw-r--r--sys/arch/moko/compile/.cvsignore2
-rw-r--r--sys/arch/moko/conf/Makefile.moko169
-rw-r--r--sys/arch/moko/conf/RAMDISK67
-rw-r--r--sys/arch/moko/conf/files.moko74
-rw-r--r--sys/arch/moko/include/_types.h11
-rw-r--r--sys/arch/moko/include/apmvar.h2
-rw-r--r--sys/arch/moko/include/asm.h4
-rw-r--r--sys/arch/moko/include/atomic.h10
-rw-r--r--sys/arch/moko/include/bootconfig.h76
-rw-r--r--sys/arch/moko/include/bus.h4
-rw-r--r--sys/arch/moko/include/cdefs.h3
-rw-r--r--sys/arch/moko/include/conf.h20
-rw-r--r--sys/arch/moko/include/cpu.h4
-rw-r--r--sys/arch/moko/include/db_machdep.h4
-rw-r--r--sys/arch/moko/include/disklabel.h3
-rw-r--r--sys/arch/moko/include/endian.h4
-rw-r--r--sys/arch/moko/include/exec.h3
-rw-r--r--sys/arch/moko/include/float.h4
-rw-r--r--sys/arch/moko/include/fp.h4
-rw-r--r--sys/arch/moko/include/frame.h4
-rw-r--r--sys/arch/moko/include/ieee.h4
-rw-r--r--sys/arch/moko/include/ieeefp.h4
-rw-r--r--sys/arch/moko/include/internal_types.h7
-rw-r--r--sys/arch/moko/include/intr.h103
-rw-r--r--sys/arch/moko/include/limits.h4
-rw-r--r--sys/arch/moko/include/loadfile_machdep.h52
-rw-r--r--sys/arch/moko/include/lock.h4
-rw-r--r--sys/arch/moko/include/mutex.h3
-rw-r--r--sys/arch/moko/include/param.h51
-rw-r--r--sys/arch/moko/include/pcb.h4
-rw-r--r--sys/arch/moko/include/pio.h4
-rw-r--r--sys/arch/moko/include/pmap.h4
-rw-r--r--sys/arch/moko/include/proc.h4
-rw-r--r--sys/arch/moko/include/profile.h4
-rw-r--r--sys/arch/moko/include/psl.h1
-rw-r--r--sys/arch/moko/include/ptrace.h4
-rw-r--r--sys/arch/moko/include/reg.h4
-rw-r--r--sys/arch/moko/include/reloc.h2
-rw-r--r--sys/arch/moko/include/setjmp.h4
-rw-r--r--sys/arch/moko/include/signal.h4
-rw-r--r--sys/arch/moko/include/spinlock.h7
-rw-r--r--sys/arch/moko/include/stdarg.h4
-rw-r--r--sys/arch/moko/include/sysarch.h4
-rw-r--r--sys/arch/moko/include/trap.h4
-rw-r--r--sys/arch/moko/include/vmparam.h86
-rw-r--r--sys/arch/moko/moko/autoconf.c152
-rw-r--r--sys/arch/moko/moko/genassym.cf1
-rw-r--r--sys/arch/moko/moko/moko_machdep.c1254
-rw-r--r--sys/arch/moko/moko/moko_start.S174
50 files changed, 0 insertions, 2468 deletions
diff --git a/sys/arch/moko/Makefile b/sys/arch/moko/Makefile
deleted file mode 100644
index d050bb1c05c..00000000000
--- a/sys/arch/moko/Makefile
+++ /dev/null
@@ -1,39 +0,0 @@
-# $OpenBSD: Makefile,v 1.3 2009/12/25 16:08:10 miod Exp $
-# $NetBSD: Makefile,v 1.1 2001/06/12 08:32:46 chris Exp $
-
-# Makefile for moko tags file and boot blocks
-
-S=${.CURDIR}/../..
-.include "$S/kern/Make.tags.inc"
-
-SUBDIR=
-
-NOPROG= noprog
-NOMAN= noman
-
-TMOKO= $S/arch/moko/tags
-
-SMOKO= $S/arch/moko/include/*.h \
- $S/arch/moko/moko/*.[ch] $S/arch/arm/arm/*.[ch] \
- $S/arch/arm/include/*.h $S/arch/arm/mainbus/*.[ch] \
- $S/arch/arm/s3c2xx0/*.h $S/arch/arm/xscale/*.[ch]
-AMOKO= $S/arch/moko/moko/*.S $S/arch/arm/arm/*.S \
- $S/arch/arm/mainbus/*.S
-
-# Directories in which to place tags links
-DMOKO= include moko
-
-tags:
- -ctags -wdtf ${TMOKO} ${SMOKO} ${COMM}
- egrep "^ENTRY(.*)|^ALTENTRY(.*)" ${AMOKO} | \
- sed "s;\([^:]*\):\([^(]*\)(\([^, )]*\)\(.*\);\3 \1 /^\2(\3\4$$/;" \
- >> ${TMOKO}
- sort -o ${TMOKO} ${TMOKO}
-
-links:
- -for i in ${DMOKO}; do \
- (cd $$i && { rm -f tags; ln -s ${TMOKO} tags; }) done
-
-obj: _SUBDIRUSE
-
-.include <bsd.prog.mk>
diff --git a/sys/arch/moko/compile/.cvsignore b/sys/arch/moko/compile/.cvsignore
deleted file mode 100644
index b72af3039e6..00000000000
--- a/sys/arch/moko/compile/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-GENERIC
-RAMDISK
diff --git a/sys/arch/moko/conf/Makefile.moko b/sys/arch/moko/conf/Makefile.moko
deleted file mode 100644
index 6bfa4d6b5aa..00000000000
--- a/sys/arch/moko/conf/Makefile.moko
+++ /dev/null
@@ -1,169 +0,0 @@
-# $OpenBSD: Makefile.moko,v 1.26 2010/05/28 14:27:08 guenther Exp $
-
-# For instructions on building kernels consult the config(8) and options(4)
-# manual pages.
-#
-# N.B.: NO DEPENDENCIES ON FOLLOWING FLAGS ARE VISIBLE TO MAKEFILE
-# IF YOU CHANGE THE DEFINITION OF ANY OF THESE RECOMPILE EVERYTHING
-# DEBUG is set to -g by config if debugging is requested (config -g).
-# PROF is set to -pg by config if profiling is requested (config -p).
-
-.include <bsd.own.mk>
-
-MKDEP?= mkdep
-SIZE?= size
-STRIP?= strip
-
-# source tree is located via $S relative to the compilation directory
-.ifndef S
-S!= cd ../../../..; pwd
-.endif
-
-_machdir?= $S/arch/${_mach}
-_archdir?= $S/arch/${_arch}
-
-INCLUDES= -nostdinc -I. -I$S -I$S/arch
-CPPFLAGS= ${INCLUDES} ${IDENT} ${PARAM} -D_KERNEL -D__${_mach}__
-CWARNFLAGS= -Werror -Wall -Wstrict-prototypes -Wmissing-prototypes \
- -Wno-main -Wno-uninitialized -Wno-format \
- -Wstack-larger-than-2047
-
-CMACHFLAGS= -ffreestanding -msoft-float # -march=armv4 -mtune=strongarm
-CMACHFLAGS+= -fno-builtin-printf -fno-builtin-snprintf \
- -fno-builtin-vsnprintf -fno-builtin-log \
- -fno-builtin-log2 -fno-builtin-malloc
-.if ${IDENT:M-DNO_PROPOLICE}
-CMACHFLAGS+= -fno-stack-protector
-.endif
-
-COPTS?= -O2
-CFLAGS= ${DEBUG} ${CWARNFLAGS} ${CMACHFLAGS} ${COPTS} ${PIPE}
-AFLAGS= -D_LOCORE -x assembler-with-cpp ${CMACHFLAGS}
-LINKFLAGS= -T ldscript
-LINKFLAGS+= --warn-common
-STRIPFLAGS= -g -x
-
-.if ${IDENT:M-DDDB_STRUCT}
-DB_STRUCTINFO= db_structinfo.h
-.else
-DB_STRUCTINFO=
-.endif
-
-HOSTCC?= ${CC}
-HOSTED_CPPFLAGS=${CPPFLAGS:S/^-nostdinc$//}
-HOSTED_CFLAGS= ${CFLAGS}
-HOSTED_C= ${HOSTCC} ${HOSTED_CFLAGS} ${HOSTED_CPPFLAGS} -c $<
-
-NORMAL_C_NOP= ${CC} ${CFLAGS} ${CPPFLAGS} -c $<
-NORMAL_C= ${CC} ${CFLAGS} ${CPPFLAGS} ${PROF} -c $<
-NORMAL_S= ${CC} ${AFLAGS} ${CPPFLAGS} -c $<
-
-%OBJS
-
-%CFILES
-
-%SFILES
-
-# load lines for config "xxx" will be emitted as:
-# xxx: ${SYSTEM_DEP} swapxxx.o
-# ${SYSTEM_LD_HEAD}
-# ${SYSTEM_LD} swapxxx.o
-# ${SYSTEM_LD_TAIL}
-SYSTEM_OBJ= ${_mach}_start.o locore.o param.o ioconf.o ${OBJS}
-SYSTEM_DEP= Makefile ${SYSTEM_OBJ}
-SYSTEM_LD_HEAD= @rm -f $@
-SYSTEM_LD_HEAD+=; \
- cat ${_archdir}/conf/ldscript.head ${_archdir}/conf/ldscript.tail | \
- sed -e 's/@KERNEL_BASE_PHYS@/${KERNEL_BASE_PHYS}/' \
- -e 's/@KERNEL_BASE_VIRT@/${KERNEL_BASE_VIRT}/' > ldscript
-
-SYSTEM_LD= @echo ${LD} ${LINKFLAGS} -o $@ '$${SYSTEM_OBJ}' vers.o; \
- ${LD} ${LINKFLAGS} -o $@ ${SYSTEM_OBJ} vers.o
-SYSTEM_LD_TAIL= @${SIZE} $@; chmod 755 $@
-
-DEBUG?=
-.if ${DEBUG} == "-g"
-LINKFLAGS+= -X
-SYSTEM_LD_TAIL+=; \
- echo mv $@ $@.gdb; rm -f $@.gdb; mv $@ $@.gdb; \
- echo ${STRIP} ${STRIPFLAGS} -o $@ $@.gdb; \
- ${STRIP} ${STRIPFLAGS} -o $@ $@.gdb
-.else
-LINKFLAGS+= -x
-.endif
-
-%LOAD
-
-assym.h: $S/kern/genassym.sh Makefile \
- ${_archdir}/${_arch}/genassym.cf ${_machdir}/${_mach}/genassym.cf
- cat ${_archdir}/${_arch}/genassym.cf ${_machdir}/${_mach}/genassym.cf | \
- sh $S/kern/genassym.sh ${CC} ${CFLAGS} ${CPPFLAGS} | \
- sort -u > assym.h.tmp && \
- mv -f assym.h.tmp assym.h
-
-param.c: $S/conf/param.c
- rm -f param.c
- cp $S/conf/param.c .
-
-param.o: param.c Makefile
- ${NORMAL_C}
-
-mcount.o: $S/lib/libkern/mcount.c Makefile
- ${NORMAL_C_NOP}
-
-ioconf.o: ioconf.c
- ${NORMAL_C}
-
-vers.o: ${SYSTEM_DEP} ${SYSTEM_SWAP_DEP}
- sh $S/conf/newvers.sh
- ${CC} ${CFLAGS} ${CPPFLAGS} ${PROF} -c vers.c
-
-clean::
- rm -f eddep *bsd *bsd.gdb tags *.[io] [a-z]*.s \
- [Ee]rrs linterrs assym.h ${DB_STRUCTINFO}
-
-lint:
- @lint -hbxncez -Dvolatile= ${CPPFLAGS} -UKGDB \
- ${CFILES} ioconf.c param.c | \
- grep -v 'static function .* unused'
-
-tags:
- @echo "see $S/kern/Makefile for tags"
-
-AFILES= ${_machdir}/${_mach}/${_mach}_start.S ${_archdir}/${_arch}/locore.S
-depend:: .depend
-.depend: ${AFILES} param.c ioconf.c ${CFILES} ${SFILES} assym.h ${DB_STRUCTINFO}
- ${MKDEP} ${AFLAGS} ${CPPFLAGS} ${AFILES}
- ${MKDEP} -a ${CFLAGS} ${CPPFLAGS} param.c ioconf.c ${CFILES}
-.if !empty(SFILES)
- ${MKDEP} -a ${AFLAGS} ${CPPFLAGS} ${SFILES}
-.endif
- cat ${_archdir}/${_arch}/genassym.cf ${_machdir}/${_mach}/genassym.cf | \
- sh $S/kern/genassym.sh ${MKDEP} -f assym.dep ${CFLAGS} ${CPPFLAGS}
- @sed -e 's/.*\.o: /assym.h: /' -e 's/\/tmp\/genassym_c.[^ ]*//' \
- < assym.dep >> .depend
- @rm -f assym.dep
-
-db_structinfo.h: $S/ddb/db_structinfo.c $S/ddb/parse_structinfo.awk
- ${CC} ${CFLAGS} ${CPPFLAGS} -gstabs -c $S/ddb/db_structinfo.c
- objdump -g db_structinfo.o | awk -f $S/ddb/parse_structinfo.awk > $@
- rm -f db_structinfo.o
-
-${_mach}_start.o: ${_machdir}/${_mach}/${_mach}_start.S
-locore.o: ${_archdir}/${_arch}/locore.S assym.h
-in_cksum_arm.o fiq_subr.o bcopyinout.o copystr.o sigcode.o: assym.h
-vectors.o cpuswitch.o exception.o bcopy_page.o irq_dispatch.o: assym.h
-
-# The install target can be redefined by putting a
-# install-kernel-${MACHINE_NAME} target into /etc/mk.conf
-MACHINE_NAME!= uname -n
-install: install-kernel-${MACHINE_NAME}
-.if !target(install-kernel-${MACHINE_NAME}})
-install-kernel-${MACHINE_NAME}:
- rm -f /obsd
- ln /bsd /obsd
- cp bsd /nbsd
- mv /nbsd /bsd
-.endif
-
-%RULES
diff --git a/sys/arch/moko/conf/RAMDISK b/sys/arch/moko/conf/RAMDISK
deleted file mode 100644
index debdb1ba4bc..00000000000
--- a/sys/arch/moko/conf/RAMDISK
+++ /dev/null
@@ -1,67 +0,0 @@
-# $OpenBSD: RAMDISK,v 1.4 2010/04/26 20:51:51 deraadt Exp $
-
-machine moko arm
-
-options TIMEZONE=0 # time zone to adjust RTC time by
-options DST=0 # daylight saving time used by RTC
-options FFS # UFS
-options CD9660 # ISO 9660 + Rock Ridge file system
-options MSDOSFS # MS-DOS file system
-options INET # IP + ICMP + TCP + UDP
-options INET6 # IPv6 (needs INET)
-options DDB # kernel debugger
-options EXT2FS # Second Extended Filesystem
-
-options ARM32
-
-options CACHE_CLEAN_BLOCK_INTR
-options SSCOM_S3C2410
-options SSCOM0CONSOLE
-
-options S3C2XX0_XTAL_CLK=12000000
-
-makeoptions KERNEL_BASE_PHYS="0x30300000"
-makeoptions KERNEL_BASE_VIRT="0xc0300000"
-
-# estimated number of users
-
-maxusers 32
-
-# CPU options
-options CPU_ARM9 # Support the XScale core
-#options XSCALE_CACHE_WRITE_THROUGH
-
-option WSDISPLAY_COMPAT_USL # VT handling
-option WSDISPLAY_COMPAT_RAWKBD # provide raw scancodes; needed for X11
-option WSDISPLAY_DEFAULTSCREENS=2 # initial number of text consoles
-option WSDISPLAY_COMPAT_PCVT # emulate some ioctls; needed for X11
-
-config bsd root on rd0a swap on rd0b
-
-# The main bus device
-mainbus0 at root
-cpu0 at mainbus?
-ssio0 at mainbus?
-# integrated UART
-sscom0 at ssio? index 0 # irq 70
-sscom1 at ssio? index 1 # irq 73
-sscom2 at ssio? index 2 # irq ?
-
-# LCD
-lcd0 at ssio?
-wsdisplay* at lcd? console ?
-
-
-# Pseudo-Devices
-pseudo-device wsmux 2 # mouse & keyboard multiplexor
-#pseudo-device crypto 1
-pseudo-device loop 1 # network loopback
-pseudo-device bpfilter 1 # packet filter
-pseudo-device rd 1 # ram disk
-pseudo-device bio 1 # ioctl multiplexing device
-
-options BOOT_CONFIG # boot-time kernel config
-
-# RAMDISK stuff
-options MINIROOTSIZE=5120
-options RAMDISK_HOOKS
diff --git a/sys/arch/moko/conf/files.moko b/sys/arch/moko/conf/files.moko
deleted file mode 100644
index 2d4ed4edd85..00000000000
--- a/sys/arch/moko/conf/files.moko
+++ /dev/null
@@ -1,74 +0,0 @@
-# $OpenBSD: files.moko,v 1.2 2009/01/02 06:38:24 drahn Exp $
-#
-# First try for arm-specific configuration info
-#
-
-maxpartitions 16
-maxusers 2 8 64
-
-major {wd = 16}
-major {sd = 24}
-major {cd = 26}
-major {rd = 18}
-
-file arch/arm/arm/conf.c
-
-file arch/moko/moko/moko_machdep.c
-
-#
-# Machine-independent SCSI drivers
-#
-include "../../../scsi/files.scsi"
-include "../../../dev/atapiscsi/files.atapiscsi"
-
-include "arch/arm/s3c2xx0/files.s3c2410"
-
-
-
-
-#
-# Machine-independent ATA drivers
-#
-include "dev/ata/files.ata"
-
-# Generic MD files
-file arch/moko/moko/autoconf.c
-
-file arch/arm/arm/disksubr.c disk
-
-# ARM FPE
-file arch/arm/fpe-arm/armfpe_glue.S armfpe
-file arch/arm/fpe-arm/armfpe_init.c armfpe
-file arch/arm/fpe-arm/armfpe.s armfpe
-
-# Machine-independent I2O drivers.
-include "dev/i2o/files.i2o"
-
-# LCD
-attach lcd at ssio with lcd_ssio
-file arch/moko/dev/moko_lcd.c lcd_ssio
-
-# Include WSCONS stuff
-include "dev/wscons/files.wscons"
-include "dev/rasops/files.rasops"
-include "dev/wsfont/files.wsfont"
-include "dev/pckbc/files.pckbc"
-
-# Include USB stuff
-include "dev/usb/files.usb"
-
-# Bluetooth
-include "dev/bluetooth/files.bluetooth"
-
-# Media Independent Interface (mii)
-include "dev/mii/files.mii"
-
-#
-# Machine-independent SD/MMC drivers
-#
-include "dev/sdmmc/files.sdmmc"
-
-#
-# Machine-independent 1-Wire drivers
-#
-include "dev/onewire/files.onewire"
diff --git a/sys/arch/moko/include/_types.h b/sys/arch/moko/include/_types.h
deleted file mode 100644
index 5c2e8323e67..00000000000
--- a/sys/arch/moko/include/_types.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/* $OpenBSD: _types.h,v 1.2 2009/11/04 19:14:10 kettenis Exp $ */
-
-#ifndef _MOKO_TYPES_H_
-#define _MOKO_TYPES_H_
-
-#include <arm/_types.h>
-
-/* Feature test macros */
-#define __HAVE_TIMECOUNTER
-
-#endif
diff --git a/sys/arch/moko/include/apmvar.h b/sys/arch/moko/include/apmvar.h
deleted file mode 100644
index e6d66f0d168..00000000000
--- a/sys/arch/moko/include/apmvar.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* $OpenBSD: apmvar.h,v 1.2 2010/02/02 06:19:28 kevlo Exp $ */
-#include <arm/apmvar.h>
diff --git a/sys/arch/moko/include/asm.h b/sys/arch/moko/include/asm.h
deleted file mode 100644
index 58a834bd185..00000000000
--- a/sys/arch/moko/include/asm.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: asm.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: asm.h,v 1.3 2001/11/25 15:55:54 thorpej Exp $ */
-
-#include <arm/asm.h>
diff --git a/sys/arch/moko/include/atomic.h b/sys/arch/moko/include/atomic.h
deleted file mode 100644
index a06ed7888eb..00000000000
--- a/sys/arch/moko/include/atomic.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/* $OpenBSD: atomic.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-
-/* Public Domain */
-
-#ifndef __MOKO_ATOMIC_H__
-#define __MOKO_ATOMIC_H__
-
-#include <arm/atomic.h>
-
-#endif /* __MOKO_ATOMIC_H__ */
diff --git a/sys/arch/moko/include/bootconfig.h b/sys/arch/moko/include/bootconfig.h
deleted file mode 100644
index 23618d1be9a..00000000000
--- a/sys/arch/moko/include/bootconfig.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/* $OpenBSD: bootconfig.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: bootconfig.h,v 1.2 2001/06/21 22:08:28 chris Exp $ */
-
-/*
- * Copyright (c) 1994 Mark Brinicombe.
- * Copyright (c) 1994 Brini.
- * All rights reserved.
- *
- * This code is derived from software written for Brini by Mark Brinicombe
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed by Mark Brinicombe
- * for the NetBSD Project.
- * 4. The name of the company nor the name of the author may be used to
- * endorse or promote products derived from this software without specific
- * prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * boot configuration structures
- *
- * Created : 12/09/94
- *
- * Based on kate/boot/bootconfig.h
- */
-
-typedef struct _PhysMem {
- u_int address;
- u_int pages;
-} PhysMem;
-
-#if defined(_KERNEL)
-
-#define DRAM_BLOCKS 1
-
-typedef struct _BootConfig {
- PhysMem dram[DRAM_BLOCKS];
- u_int dramblocks;
-} BootConfig;
-
-extern BootConfig bootconfig;
-#define MAX_BOOT_STRING 255
-
-#define BOOTOPT_TYPE_BOOLEAN 0
-#define BOOTOPT_TYPE_STRING 1
-#define BOOTOPT_TYPE_INT 2
-#define BOOTOPT_TYPE_BININT 3
-#define BOOTOPT_TYPE_HEXINT 4
-#define BOOTOPT_TYPE_MASK 7
-
-int get_bootconf_option (char *string, char *option, int type, void *result);
-
-extern char *boot_args;
-extern char *boot_file;
-#endif /* _KERNEL */
-
-/* End of bootconfig.h */
diff --git a/sys/arch/moko/include/bus.h b/sys/arch/moko/include/bus.h
deleted file mode 100644
index 46728f6516e..00000000000
--- a/sys/arch/moko/include/bus.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: bus.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: bus.h,v 1.3 2001/11/25 15:55:55 thorpej Exp $ */
-
-#include <arm/bus.h>
diff --git a/sys/arch/moko/include/cdefs.h b/sys/arch/moko/include/cdefs.h
deleted file mode 100644
index a59e4e43757..00000000000
--- a/sys/arch/moko/include/cdefs.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/* $OpenBSD: cdefs.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-
-#include <arm/cdefs.h>
diff --git a/sys/arch/moko/include/conf.h b/sys/arch/moko/include/conf.h
deleted file mode 100644
index 260ba6ac9d3..00000000000
--- a/sys/arch/moko/include/conf.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* $OpenBSD: conf.h,v 1.2 2008/11/27 11:40:18 drahn Exp $ */
-/* $NetBSD: conf.h,v 1.8 2002/02/10 12:26:03 chris Exp $ */
-
-#ifndef _MOKO_CONF_H
-#define _MOKO_CONF_H
-
-#include <sys/conf.h>
-
-/*
- * MOKO specific device includes go in here
- */
-
-//#define CONF_HAVE_APM
-#define CONF_HAVE_USB
-#define CONF_HAVE_WSCONS
-#define CONF_HAVE_SSCOM
-
-#include <arm/conf.h>
-
-#endif /* _MOKO_CONF_H */
diff --git a/sys/arch/moko/include/cpu.h b/sys/arch/moko/include/cpu.h
deleted file mode 100644
index cfd9d838561..00000000000
--- a/sys/arch/moko/include/cpu.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: cpu.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: cpu.h,v 1.3 2001/11/25 15:55:55 thorpej Exp $ */
-
-#include <arm/cpu.h>
diff --git a/sys/arch/moko/include/db_machdep.h b/sys/arch/moko/include/db_machdep.h
deleted file mode 100644
index 3f4b9333e38..00000000000
--- a/sys/arch/moko/include/db_machdep.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: db_machdep.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: db_machdep.h,v 1.3 2001/11/25 15:55:55 thorpej Exp $ */
-
-#include <arm/db_machdep.h>
diff --git a/sys/arch/moko/include/disklabel.h b/sys/arch/moko/include/disklabel.h
deleted file mode 100644
index 1c0a7c435f1..00000000000
--- a/sys/arch/moko/include/disklabel.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/* $OpenBSD: disklabel.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-
-#include <arm/disklabel.h>
diff --git a/sys/arch/moko/include/endian.h b/sys/arch/moko/include/endian.h
deleted file mode 100644
index 99041e16d9d..00000000000
--- a/sys/arch/moko/include/endian.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: endian.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: endian.h,v 1.3 2001/11/25 15:55:56 thorpej Exp $ */
-
-#include <arm/endian.h>
diff --git a/sys/arch/moko/include/exec.h b/sys/arch/moko/include/exec.h
deleted file mode 100644
index 53fa453b754..00000000000
--- a/sys/arch/moko/include/exec.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/* $OpenBSD: exec.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* public domain */
-#include <arm/exec.h>
diff --git a/sys/arch/moko/include/float.h b/sys/arch/moko/include/float.h
deleted file mode 100644
index fa2e2249f53..00000000000
--- a/sys/arch/moko/include/float.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: float.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: float.h,v 1.3 2001/11/25 15:55:56 thorpej Exp $ */
-
-#include <arm/float.h>
diff --git a/sys/arch/moko/include/fp.h b/sys/arch/moko/include/fp.h
deleted file mode 100644
index 9abd735a1ec..00000000000
--- a/sys/arch/moko/include/fp.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: fp.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: fp.h,v 1.3 2001/11/25 15:55:56 thorpej Exp $ */
-
-#include <arm/fp.h>
diff --git a/sys/arch/moko/include/frame.h b/sys/arch/moko/include/frame.h
deleted file mode 100644
index 110ad69ce5b..00000000000
--- a/sys/arch/moko/include/frame.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: frame.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: frame.h,v 1.1 2001/06/08 22:23:00 chris Exp $ */
-
-#include <arm/frame.h>
diff --git a/sys/arch/moko/include/ieee.h b/sys/arch/moko/include/ieee.h
deleted file mode 100644
index e1ad062370b..00000000000
--- a/sys/arch/moko/include/ieee.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: ieee.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: ieee.h,v 1.3 2001/11/25 15:55:56 thorpej Exp $ */
-
-#include <arm/ieee.h>
diff --git a/sys/arch/moko/include/ieeefp.h b/sys/arch/moko/include/ieeefp.h
deleted file mode 100644
index efcd0ff7ec2..00000000000
--- a/sys/arch/moko/include/ieeefp.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: ieeefp.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: ieeefp.h,v 1.3 2001/11/25 15:55:56 thorpej Exp $ */
-
-#include <arm/ieeefp.h>
diff --git a/sys/arch/moko/include/internal_types.h b/sys/arch/moko/include/internal_types.h
deleted file mode 100644
index a9e0d001189..00000000000
--- a/sys/arch/moko/include/internal_types.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/* $OpenBSD: internal_types.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* Public domain */
-#ifndef _MACHINE_INTERNAL_TYPES_H_
-#define _MACHINE_INTERNAL_TYPES_H_
-
-#include "arm/internal_types.h"
-#endif
diff --git a/sys/arch/moko/include/intr.h b/sys/arch/moko/include/intr.h
deleted file mode 100644
index d2232a72882..00000000000
--- a/sys/arch/moko/include/intr.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/* $OpenBSD: intr.h,v 1.5 2010/04/23 03:50:22 miod Exp $ */
-/* $NetBSD: intr.h,v 1.12 2003/06/16 20:00:59 thorpej Exp $ */
-
-/*
- * Copyright (c) 2001, 2003 Wasabi Systems, Inc.
- * All rights reserved.
- *
- * Written by Jason R. Thorpe for Wasabi Systems, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed for the NetBSD Project by
- * Wasabi Systems, Inc.
- * 4. The name of Wasabi Systems, Inc. may not be used to endorse
- * or promote products derived from this software without specific prior
- * written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _EVBARM_INTR_H_
-#define _EVBARM_INTR_H_
-
-#ifdef _KERNEL
-
-
-/* Interrupt priority "levels". */
-#define IPL_NONE 0 /* nothing */
-#define IPL_SOFT 1 /* generic software interrupts */
-#define IPL_SOFTCLOCK 2 /* software clock interrupt */
-#define IPL_SOFTNET 3 /* software network interrupt */
-#define IPL_BIO 4 /* block I/O */
-#define IPL_NET 5 /* network */
-#define IPL_SOFTTTY 6 /* software serial interrupt */
-#define IPL_TTY 7 /* terminals */
-#define IPL_VM 8 /* memory allocation */
-#define IPL_AUDIO 9 /* audio device */
-#define IPL_CLOCK 10 /* clock interrupt */
-#define IPL_STATCLOCK 11 /* statistics clock interrupt */
-#define IPL_SCHED 12 /* everything */
-#define IPL_HIGH 12 /* everything */
-
-#define NIPL 13
-
-/* Interrupt sharing types. */
-#define IST_NONE 0 /* none */
-#define IST_PULSE 1 /* pulsed */
-#define IST_EDGE 2 /* edge-triggered */
-#define IST_LEVEL 3 /* level-triggered */
-
-#define IST_LEVEL_LOW IST_LEVEL
-#define IST_LEVEL_HIGH 4
-#define IST_EDGE_FALLING IST_EDGE
-#define IST_EDGE_RISING 5
-#define IST_EDGE_BOTH 6
-
-#ifndef _LOCORE
-
-#include <sys/device.h>
-#include <sys/queue.h>
-
-#define splhigh() _splraise(IPL_HIGH)
-#define splsoft() _splraise(IPL_SOFT)
-#define splsoftclock() _splraise(IPL_SOFTCLOCK)
-#define splsoftnet() _splraise(IPL_SOFTNET)
-#define splbio() _splraise(IPL_BIO)
-#define splnet() _splraise(IPL_NET)
-#define spltty() _splraise(IPL_TTY)
-#define splvm() _splraise(IPL_VM)
-#define splaudio() _splraise(IPL_AUDIO)
-#define splclock() _splraise(IPL_CLOCK)
-#define splstatclock() _splraise(IPL_STATCLOCK)
-
-#define spl0() _spllower(IPL_NONE)
-
-#define splsched() splhigh()
-#define spllock() splhigh()
-
-#endif /* ! _LOCORE */
-
-#include <arm/s3c2xx0/s3c2410_intr.h>
-
-#endif /* _KERNEL */
-
-#endif /* _EVBARM_INTR_H_ */
diff --git a/sys/arch/moko/include/limits.h b/sys/arch/moko/include/limits.h
deleted file mode 100644
index 96b0001ec1e..00000000000
--- a/sys/arch/moko/include/limits.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: limits.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: limits.h,v 1.3 2001/11/25 15:55:57 thorpej Exp $ */
-
-#include <arm/limits.h>
diff --git a/sys/arch/moko/include/loadfile_machdep.h b/sys/arch/moko/include/loadfile_machdep.h
deleted file mode 100644
index 4390f306174..00000000000
--- a/sys/arch/moko/include/loadfile_machdep.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/* $OpenBSD: loadfile_machdep.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: loadfile_machdep.h,v 1.1 1999/04/29 03:17:12 tsubai Exp $ */
-
-/*-
- * Copyright (c) 1999 The NetBSD Foundation, Inc.
- * All rights reserved.
- *
- * This code is derived from software contributed to The NetBSD Foundation
- * by Christos Zoulas.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#define BOOT_ELF
-#define ELFSIZE 32
-
-#define LOAD_KERNEL (LOAD_ALL & ~LOAD_TEXTA)
-#define COUNT_KERNEL (COUNT_ALL & ~COUNT_TEXTA)
-
-#define LOADADDR(a) ((((u_long)(a)) + offset)&0xfffffff)
-#define ALIGNENTRY(a) ((u_long)(a))
-#define READ(f, b, c) read((f), (void *)LOADADDR(b), (c))
-#define BCOPY(s, d, c) memcpy((void *)LOADADDR(d), (void *)(s), (c))
-#define BZERO(d, c) memset((void *)LOADADDR(d), 0, (c))
-#define WARN(a) (void)(printf a, \
- printf((errno ? ": %s\n" : "\n"), \
- strerror(errno)))
-#define PROGRESS(a) (void) printf a
-#define ALLOC(a) alloc(a)
-#define FREE(a, b) free(a, b)
-#define OKMAGIC(a) ((a) == OMAGIC)
-
-void run_loadfile(u_long *, int);
diff --git a/sys/arch/moko/include/lock.h b/sys/arch/moko/include/lock.h
deleted file mode 100644
index 707232f98cf..00000000000
--- a/sys/arch/moko/include/lock.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: lock.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: lock.h,v 1.3 2001/11/25 15:55:57 thorpej Exp $ */
-
-#include <arm/lock.h>
diff --git a/sys/arch/moko/include/mutex.h b/sys/arch/moko/include/mutex.h
deleted file mode 100644
index 6324ae4058d..00000000000
--- a/sys/arch/moko/include/mutex.h
+++ /dev/null
@@ -1,3 +0,0 @@
-/* $OpenBSD: mutex.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* public domain */
-#include <arm/mutex.h>
diff --git a/sys/arch/moko/include/param.h b/sys/arch/moko/include/param.h
deleted file mode 100644
index 3fa378f46b5..00000000000
--- a/sys/arch/moko/include/param.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* $OpenBSD: param.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: param.h,v 1.4 2002/02/12 06:58:19 thorpej Exp $ */
-
-/*
- * Copyright (c) 1994,1995 Mark Brinicombe.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed by the RiscBSD team.
- * 4. The name "RiscBSD" nor the name of the author may be used to
- * endorse or promote products derived from this software without specific
- * prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY RISCBSD ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL RISCBSD OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _MOKO_PARAM_H_
-#define _MOKO_PARAM_H_
-
-/*
- * 1 page should be enough
- */
-#ifndef MSGBUFSIZE
-#define MSGBUFSIZE (1*NBPG)
-#endif
-
-#include <arm/param.h>
-
-#define _MACHINE moko
-#define MACHINE "moko"
-
-#endif /* _MOKO_PARAM_H_ */
diff --git a/sys/arch/moko/include/pcb.h b/sys/arch/moko/include/pcb.h
deleted file mode 100644
index 680c1fe87b5..00000000000
--- a/sys/arch/moko/include/pcb.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: pcb.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: pcb.h,v 1.3 2001/11/25 15:55:57 thorpej Exp $ */
-
-#include <arm/pcb.h>
diff --git a/sys/arch/moko/include/pio.h b/sys/arch/moko/include/pio.h
deleted file mode 100644
index 1360b2c43f7..00000000000
--- a/sys/arch/moko/include/pio.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: pio.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: pio.h,v 1.3 2001/12/07 23:09:33 chris Exp $ */
-
-#include <arm/pio.h>
diff --git a/sys/arch/moko/include/pmap.h b/sys/arch/moko/include/pmap.h
deleted file mode 100644
index 2be90c7642d..00000000000
--- a/sys/arch/moko/include/pmap.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: pmap.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: pmap.h,v 1.2 2001/11/23 17:29:01 thorpej Exp $ */
-
-#include <arm/pmap.h>
diff --git a/sys/arch/moko/include/proc.h b/sys/arch/moko/include/proc.h
deleted file mode 100644
index 7612fc2e983..00000000000
--- a/sys/arch/moko/include/proc.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: proc.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: proc.h,v 1.3 2001/11/25 15:55:57 thorpej Exp $ */
-
-#include <arm/proc.h>
diff --git a/sys/arch/moko/include/profile.h b/sys/arch/moko/include/profile.h
deleted file mode 100644
index 6f5dac5f8d2..00000000000
--- a/sys/arch/moko/include/profile.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: profile.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: profile.h,v 1.3 2001/11/25 15:55:57 thorpej Exp $ */
-
-#include <arm/profile.h>
diff --git a/sys/arch/moko/include/psl.h b/sys/arch/moko/include/psl.h
deleted file mode 100644
index bea8545a2c9..00000000000
--- a/sys/arch/moko/include/psl.h
+++ /dev/null
@@ -1 +0,0 @@
-/* $OpenBSD: psl.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
diff --git a/sys/arch/moko/include/ptrace.h b/sys/arch/moko/include/ptrace.h
deleted file mode 100644
index 3e6c527c823..00000000000
--- a/sys/arch/moko/include/ptrace.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: ptrace.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: ptrace.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $ */
-
-#include <arm/ptrace.h>
diff --git a/sys/arch/moko/include/reg.h b/sys/arch/moko/include/reg.h
deleted file mode 100644
index f5890b92e76..00000000000
--- a/sys/arch/moko/include/reg.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: reg.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: reg.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $ */
-
-#include <arm/reg.h>
diff --git a/sys/arch/moko/include/reloc.h b/sys/arch/moko/include/reloc.h
deleted file mode 100644
index a3f2d660180..00000000000
--- a/sys/arch/moko/include/reloc.h
+++ /dev/null
@@ -1,2 +0,0 @@
-/* $OpenBSD: reloc.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-#include <arm/reloc.h>
diff --git a/sys/arch/moko/include/setjmp.h b/sys/arch/moko/include/setjmp.h
deleted file mode 100644
index 0b9adcf6bf3..00000000000
--- a/sys/arch/moko/include/setjmp.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: setjmp.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: setjmp.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $ */
-
-#include <arm/setjmp.h>
diff --git a/sys/arch/moko/include/signal.h b/sys/arch/moko/include/signal.h
deleted file mode 100644
index a372fb8119d..00000000000
--- a/sys/arch/moko/include/signal.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: signal.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: signal.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $ */
-
-#include <arm/signal.h>
diff --git a/sys/arch/moko/include/spinlock.h b/sys/arch/moko/include/spinlock.h
deleted file mode 100644
index 784f95c8aee..00000000000
--- a/sys/arch/moko/include/spinlock.h
+++ /dev/null
@@ -1,7 +0,0 @@
-
-/* $OpenBSD: spinlock.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-#ifndef _MOKO_SPINLOCK_H_
-#define _MOKO_SPINLOCK_H_
-#include <arm/spinlock.h>
-#endif /* _MOKO_SPINLOCK_H_ */
-
diff --git a/sys/arch/moko/include/stdarg.h b/sys/arch/moko/include/stdarg.h
deleted file mode 100644
index 8d28cc23536..00000000000
--- a/sys/arch/moko/include/stdarg.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: stdarg.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: stdarg.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $ */
-
-#include <arm/stdarg.h>
diff --git a/sys/arch/moko/include/sysarch.h b/sys/arch/moko/include/sysarch.h
deleted file mode 100644
index c63aca4c916..00000000000
--- a/sys/arch/moko/include/sysarch.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: sysarch.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: sysarch.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $ */
-
-#include <arm/sysarch.h>
diff --git a/sys/arch/moko/include/trap.h b/sys/arch/moko/include/trap.h
deleted file mode 100644
index 8223c2b18bf..00000000000
--- a/sys/arch/moko/include/trap.h
+++ /dev/null
@@ -1,4 +0,0 @@
-/* $OpenBSD: trap.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: trap.h,v 1.3 2001/11/25 15:55:58 thorpej Exp $ */
-
-#include <arm/trap.h>
diff --git a/sys/arch/moko/include/vmparam.h b/sys/arch/moko/include/vmparam.h
deleted file mode 100644
index 14a3a237c34..00000000000
--- a/sys/arch/moko/include/vmparam.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/* $OpenBSD: vmparam.h,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: vmparam.h,v 1.23 2003/05/22 05:47:07 thorpej Exp $ */
-
-/*
- * Copyright (c) 1988 The Regents of the University of California.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the University nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#ifndef _ARM32_VMPARAM_H_
-#define _ARM32_VMPARAM_H_
-
-#define ARM_KERNEL_BASE 0xc0000000
-
-#include <arm/vmparam.h>
-
-#ifdef _KERNEL
-/*
- * Address space constants
- */
-
-/*
- * The line between user space and kernel space
- * Mappings >= KERNEL_BASE are constant across all processes
- */
-#define KERNEL_BASE ARM_KERNEL_BASE
-
-/*
- * Override the default pager_map size, there's not enough KVA.
- */
-#define PAGER_MAP_SIZE (4 * 1024 * 1024)
-
-/*
- * Size of User Raw I/O map
- */
-
-#define USRIOSIZE 300
-
-/* virtual sizes (bytes) for various kernel submaps */
-
-#define VM_PHYS_SIZE (USRIOSIZE*PAGE_SIZE)
-
-/*
- * max number of non-contig chunks of physical RAM you can have
- */
-
-#define VM_PHYSSEG_MAX 1
-#define VM_PHYSSEG_STRAT VM_PSTRAT_RANDOM
-
-/*
- * this indicates that we can't add RAM to the VM system after the
- * vm system is init'd.
- */
-
-#define VM_PHYSSEG_NOADD
-
-#endif /* _KERNEL */
-
-#define VM_NFREELIST 1
-#define VM_FREELIST_DEFAULT 0
-
-
-#endif /* _ARM32_VMPARAM_H_ */
diff --git a/sys/arch/moko/moko/autoconf.c b/sys/arch/moko/moko/autoconf.c
deleted file mode 100644
index 21a5afd339c..00000000000
--- a/sys/arch/moko/moko/autoconf.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* $OpenBSD: autoconf.c,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-/* $NetBSD: autoconf.c,v 1.2 2001/09/05 16:17:36 matt Exp $ */
-
-/*
- * Copyright (c) 1994-1998 Mark Brinicombe.
- * Copyright (c) 1994 Brini.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed by Mark Brinicombe for
- * the NetBSD project.
- * 4. The name of the company nor the name of the author may be used to
- * endorse or promote products derived from this software without specific
- * prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * RiscBSD kernel project
- *
- * autoconf.c
- *
- * Autoconfiguration functions
- */
-
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/reboot.h>
-#include <sys/disklabel.h>
-#include <sys/device.h>
-#include <sys/conf.h>
-#include <sys/kernel.h>
-#include <sys/timeout.h>
-#include <sys/malloc.h>
-
-#include <uvm/uvm_extern.h>
-
-#include <machine/bootconfig.h>
-#include <machine/intr.h>
-#include <dev/cons.h>
-
-int booted_partition;
-struct device *bootdv = NULL;
-extern char *boot_file;
-
-void dumpconf(void);
-
-/*
- * Now that we are fully operational, we can checksum the
- * disks, and using some heuristics, hopefully are able to
- * always determine the correct root disk.
- */
-void
-diskconf()
-{
-#if 0
- dev_t tmpdev;
-#endif
-
-#if 0
- /*
- * Configure root, swap, and dump area. This is
- * currently done by running the same checksum
- * algorithm over all known disks, as was done in
- * /boot. Then we basically fixup the *dev vars
- * from the info we gleaned from this.
- */
- dkcsumattach();
-#endif
-
-#if 0
- /*
- * XXX
- * zaurus bootblocks currently pass in "bsd" instead of
- * "device:bsd", or any such thing, making this a real pain.
- */
- if (bootdv == NULL)
- bootdv = parsedisk("wd0a", strlen("wd0a"), 0, &tmpdev);
- if (bootdv == NULL)
- printf("boot device: lookup '%s' failed.\n", boot_file);
- else
- printf("boot device: %s\n", bootdv->dv_xname);
-#endif
-
- setroot(bootdv, 0, RB_USERREQ);
- dumpconf();
-
-}
-
-void
-device_register(struct device *dev, void *aux)
-{
-}
-
-/*
- * void cpu_configure()
- *
- * Configure all the root devices
- * The root devices are expected to configure their own children
- */
-void
-cpu_configure(void)
-{
- softintr_init();
-
- /*
- * Since various PCI interrupts could be routed via the ICU
- * (for PCI devices in the bridge) we need to set up the ICU
- * now so that these interrupts can be established correctly
- * i.e. This is a hack.
- */
-
- config_rootfound("mainbus", NULL);
-
- /*
- * We can not know which is our root disk, defer
- * until we can checksum blocks to figure it out.
- */
- cold = 0;
-
- /* Time to start taking interrupts so lets open the flood gates .... */
- (void)spl0();
-
-}
-
-struct nam2blk nam2blk[] = {
- { "wd", 16 },
- { "sd", 24 },
- { "cd", 26 },
- { "rd", 18 },
- { "raid", 71 },
- { "vnd", 19 },
- { NULL, -1 }
-};
diff --git a/sys/arch/moko/moko/genassym.cf b/sys/arch/moko/moko/genassym.cf
deleted file mode 100644
index 679dcad021f..00000000000
--- a/sys/arch/moko/moko/genassym.cf
+++ /dev/null
@@ -1 +0,0 @@
-# $OpenBSD: genassym.cf,v 1.1 2010/04/26 22:11:38 deraadt Exp $
diff --git a/sys/arch/moko/moko/moko_machdep.c b/sys/arch/moko/moko/moko_machdep.c
deleted file mode 100644
index d4bc8509407..00000000000
--- a/sys/arch/moko/moko/moko_machdep.c
+++ /dev/null
@@ -1,1254 +0,0 @@
-/* $OpenBSD: moko_machdep.c,v 1.4 2009/07/26 18:48:55 miod Exp $ */
-/* $NetBSD: lubbock_machdep.c,v 1.2 2003/07/15 00:25:06 lukem Exp $ */
-
-/*
- * Copyright (c) 2002, 2003 Genetec Corporation. All rights reserved.
- * Written by Hiroyuki Bessho for Genetec Corporation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of Genetec Corporation may not be used to endorse or
- * promote products derived from this software without specific prior
- * written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORPORATION
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- *
- */
-/*
- * Copyright (c) 2001 Wasabi Systems, Inc.
- * All rights reserved.
- *
- * Written by Jason R. Thorpe for Wasabi Systems, Inc.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed for the NetBSD Project by
- * Wasabi Systems, Inc.
- * 4. The name of Wasabi Systems, Inc. may not be used to endorse
- * or promote products derived from this software without specific prior
- * written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-/*
- * Copyright (c) 1997,1998 Mark Brinicombe.
- * Copyright (c) 1997,1998 Causality Limited.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed by Mark Brinicombe
- * for the NetBSD Project.
- * 4. The name of the company nor the name of the author may be used to
- * endorse or promote products derived from this software without specific
- * prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- */
-
-
-#include <sys/param.h>
-#include <sys/device.h>
-#include <sys/systm.h>
-#include <sys/kernel.h>
-#include <sys/exec.h>
-#include <sys/proc.h>
-#include <sys/msgbuf.h>
-#include <sys/reboot.h>
-#include <sys/termios.h>
-#include <sys/kcore.h>
-
-#include <uvm/uvm_extern.h>
-
-#include <sys/conf.h>
-#include <sys/queue.h>
-#include <sys/device.h>
-#include <dev/cons.h>
-#include <dev/ic/smc91cxxreg.h>
-
-#include <machine/db_machdep.h>
-#include <ddb/db_sym.h>
-#include <ddb/db_extern.h>
-#ifdef KGDB
-#include <sys/kgdb.h>
-#endif
-
-#include <machine/bootconfig.h>
-#include <machine/bus.h>
-#include <machine/cpu.h>
-#include <machine/frame.h>
-#include <arm/kcore.h>
-#include <arm/machdep.h>
-#include <machine/intr.h>
-#include <arm/undefined.h>
-
-#include <arm/s3c2xx0/s3c2410reg.h>
-#include <arm/s3c2xx0/s3c2410var.h>
-
-#ifdef CONF_HAVE_APM
-#include "apm.h"
-#if NAPM > 0
-#include <moko/dev/moko_apm.h>
-#endif
-#endif
-
-#include "wsdisplay.h"
-
-/*
- * Address to map I/O registers in early initialize stage.
- */
-#define SMDK2410_IO_VBASE 0xfd000000
-
-/* Kernel text starts 3MB in from the bottom of the kernel address space. */
-#define KERNEL_OFFSET 0x00300000
-#define KERNEL_TEXT_BASE (KERNEL_BASE + KERNEL_OFFSET)
-#define KERNEL_VM_BASE (KERNEL_BASE + 0x04000000)
-
-/*
- * The range 0xc1000000 - 0xccffffff is available for kernel VM space
- * Core-logic registers and I/O mappings occupy 0xfd000000 - 0xffffffff
- */
-#define KERNEL_VM_SIZE 0x10000000
-
-/*
- * Address to call from cpu_reset() to reset the machine.
- * This is machine architecture dependant as it varies depending
- * on where the ROM appears when you turn the MMU off.
- */
-
-u_int cpu_reset_address = 0;
-
-/* Define various stack sizes in pages */
-#define IRQ_STACK_SIZE 1
-#define ABT_STACK_SIZE 1
-#ifdef IPKDB
-#define UND_STACK_SIZE 2
-#else
-#define UND_STACK_SIZE 1
-#endif
-
-BootConfig bootconfig; /* Boot config storage */
-char *boot_args = NULL;
-char *boot_file = NULL;
-
-paddr_t physical_start;
-paddr_t physical_freestart;
-paddr_t physical_freeend;
-paddr_t physical_end;
-u_int free_pages;
-int physmem = 0;
-
-/*int debug_flags;*/
-#ifndef PMAP_STATIC_L1S
-int max_processes = 64; /* Default number */
-#endif /* !PMAP_STATIC_L1S */
-
-/* Physical and virtual addresses for some global pages */
-pv_addr_t systempage;
-pv_addr_t irqstack;
-pv_addr_t undstack;
-pv_addr_t abtstack;
-extern pv_addr_t kernelstack;
-pv_addr_t minidataclean;
-
-paddr_t msgbufphys;
-
-extern u_int data_abort_handler_address;
-extern u_int prefetch_abort_handler_address;
-extern u_int undefined_handler_address;
-
-#ifdef PMAP_DEBUG
-extern int pmap_debug_level;
-#endif
-
-#define KERNEL_PT_SYS 0 /* Page table for mapping proc0 zero page */
-#define KERNEL_PT_KERNEL 1 /* Page table for mapping kernel */
-#define KERNEL_PT_KERNEL_NUM 32
-#define KERNEL_PT_VMDATA (KERNEL_PT_KERNEL+KERNEL_PT_KERNEL_NUM)
- /* Page tables for mapping kernel VM */
-#define KERNEL_PT_VMDATA_NUM 8 /* start with 32MB of KVM */
-#define NUM_KERNEL_PTS (KERNEL_PT_VMDATA + KERNEL_PT_VMDATA_NUM)
-
-pv_addr_t kernel_pt_table[NUM_KERNEL_PTS];
-
-extern struct user *proc0paddr;
-
-#define BOOT_STRING_MAGIC 0x4f425344
-
-char bootargs[MAX_BOOT_STRING];
-void process_kernel_args(char *);
-
-/* Prototypes */
-
-void consinit(void);
-void early_clkman(u_int, int);
-void kgdb_port_init(void);
-void change_clock(uint32_t v);
-
-bs_protos(bs_notimpl);
-
-#include "sscom.h"
-#if NSSCOM > 0
-#include <arch/arm/s3c2xx0/sscom_var.h>
-#endif
-
-#ifndef CONSPEED
-#define CONSPEED B115200 /* What RedBoot uses */
-#endif
-#ifndef CONMODE
-#define CONMODE ((TTYDEF_CFLAG & ~(CSIZE | CSTOPB | PARENB)) | CS8) /* 8N1 */
-#endif
-
-int comcnspeed = CONSPEED;
-int comcnmode = CONMODE;
-
-
-/*
- * void boot(int howto, char *bootstr)
- *
- * Reboots the system
- *
- * Deal with any syncing, unmounting, dumping and shutdown hooks,
- * then reset the CPU.
- */
-void
-boot(int howto)
-{
- if (cold) {
- /*
- * If the system is cold, just halt, unless the user
- * explicitely asked for reboot.
- */
- if ((howto & RB_USERREQ) == 0)
- howto |= RB_HALT;
- goto haltsys;
- }
-
- /*
- * If RB_NOSYNC was not specified sync the discs.
- * Note: Unless cold is set to 1 here, syslogd will die during the
- * unmount. It looks like syslogd is getting woken up only to find
- * that it cannot page part of the binary in as the filesystem has
- * been unmounted.
- */
- if (!(howto & RB_NOSYNC))
- bootsync(howto);
-
- /* Say NO to interrupts */
- splhigh();
-
-#if 0
- /* Do a dump if requested. */
- if ((howto & (RB_DUMP | RB_HALT)) == RB_DUMP)
- dumpsys();
-#endif
-
-haltsys:
- doshutdownhooks();
-
- /* Make sure IRQ's are disabled */
- IRQdisable;
-
- if (howto & RB_HALT) {
-#if NAPM > 0
- if (howto & RB_POWERDOWN) {
-
- printf("\nAttempting to power down...\n");
- delay(6000000);
- zapm_poweroff();
- }
-#endif
-
- printf("The operating system has halted.\n");
- printf("Please press any key to reboot.\n\n");
- cnpollc(1);
- cngetc();
- cnpollc(0);
- }
-
- printf("rebooting...\n");
- delay(6000000);
-#if NAPM > 0
- zapm_restart();
-#endif
- printf("reboot failed; spinning\n");
- while(1);
- /*NOTREACHED*/
-}
-
-static __inline
-pd_entry_t *
-read_ttb(void)
-{
- long ttb;
-
- __asm __volatile("mrc p15, 0, %0, c2, c0, 0" : "=r" (ttb));
-
-
- return (pd_entry_t *)(ttb & ~((1<<14)-1));
-}
-
-/*
- * Mapping table for core kernel memory. These areas are mapped in
- * init time at fixed virtual address with section mappings.
- */
-
-#define _A(a) ((a) & ~L1_S_OFFSET)
-#define _S(s) (((s) + L1_S_SIZE - 1) & ~(L1_S_SIZE-1))
-
-#define _V(n) (SMDK2410_IO_VBASE + (n) * L1_S_SIZE)
-
-#define GPIO_VBASE _V(0)
-#define INTCTL_VBASE _V(1)
-#define CLKMAN_VBASE _V(2)
-#define UART_VBASE _V(3)
-#define MOKO_VBASE_FREE _V(4)
-
-const struct pmap_devmap smdk2410_devmap[] = {
- {
- GPIO_VBASE,
- _A(S3C2410_GPIO_BASE),
- _S(S3C2410_GPIO_SIZE),
- VM_PROT_READ|VM_PROT_WRITE,
- PTE_NOCACHE
- }, {
- INTCTL_VBASE,
- _A(S3C2410_INTCTL_BASE),
- _S(S3C2410_INTCTL_SIZE),
- VM_PROT_READ|VM_PROT_WRITE,
- PTE_NOCACHE
- }, {
- CLKMAN_VBASE,
- _A(S3C2410_CLKMAN_BASE),
- _S(S3C24X0_CLKMAN_SIZE),
- VM_PROT_READ|VM_PROT_WRITE,
- PTE_NOCACHE
- }, { /* UART registers for UART0, 1, 2. */
- UART_VBASE,
- _A(S3C2410_UART0_BASE),
- _S(S3C2410_UART_BASE(3) - S3C2410_UART0_BASE),
- VM_PROT_READ|VM_PROT_WRITE,
- PTE_NOCACHE
- }, {
- 0, 0, 0, 0
- }
-};
-
-#undef _A
-#undef _S
-
-#define VERBOSE_INIT_ARM
-static void
-map_io_area(paddr_t pagedir)
-{
- int loop;
-
- /*
- * Map devices we can map w/ section mappings.
- */
- loop = 0;
- while (smdk2410_devmap[loop].pd_size) {
- vsize_t sz;
-
-#ifdef VERBOSE_INIT_ARM
- printf("%08lx -> %08lx @ %08lx\n", smdk2410_devmap[loop].pd_pa,
- smdk2410_devmap[loop].pd_pa + smdk2410_devmap[loop].pd_size - 1,
- smdk2410_devmap[loop].pd_va);
-#endif
- for (sz = 0; sz < smdk2410_devmap[loop].pd_size; sz += L1_S_SIZE)
- pmap_map_section(pagedir,
- smdk2410_devmap[loop].pd_va + sz,
- smdk2410_devmap[loop].pd_pa + sz,
- smdk2410_devmap[loop].pd_prot,
- smdk2410_devmap[loop].pd_cache);
- ++loop;
- }
-}
-
-/*
- * simple memory mapping function used in early bootstrap stage
- * before pmap is initialized.
- * size and cacheability are ignored and map one section with nocache.
- */
-static vaddr_t section_free = MOKO_VBASE_FREE;
-
-static int
-bootstrap_bs_map(void *t, bus_addr_t bpa, bus_size_t size,
- int flags, bus_space_handle_t *bshp)
-{
- u_long startpa;
- vaddr_t va;
- pd_entry_t *pagedir = read_ttb();
- /* This assumes PA==VA for page directory */
-
- /* search smdk2410_devmap for desired mapping */
- {
- int i;
- for (i = 0; smdk2410_devmap[i].pd_va != 0; i++) {
- if (smdk2410_devmap[i].pd_pa <= bpa &&
- smdk2410_devmap[i].pd_pa+L1_S_SIZE > bpa) {
- /* falls in region */
- *bshp = (bus_space_handle_t)
- (smdk2410_devmap[i].pd_va +
- (bpa - smdk2410_devmap[i].pd_pa));
- return (0);
- }
- }
- };
-
- va = section_free;
- section_free += L1_S_SIZE;
-
- startpa = trunc_page(bpa);
- pmap_map_section((vaddr_t)pagedir, va, startpa,
- VM_PROT_READ | VM_PROT_WRITE, PTE_NOCACHE);
- cpu_tlb_flushD();
-
- *bshp = (bus_space_handle_t)(va + (bpa - startpa));
-
- return(0);
-}
-
-/*
- * u_int initarm(...)
- *
- * Initial entry point on startup. This gets called before main() is
- * entered.
- * It should be responsible for setting up everything that must be
- * in place when main is called.
- * This includes
- * Taking a copy of the boot configuration structure.
- * Initialising the physical console so characters can be printed.
- * Setting up page tables for the kernel
- * Relocating the kernel to the bottom of physical memory
- */
-u_int ol1pagetable;
-void sscom_dump_init_state(void);
-
-/*
- * format is 0xff << 8 is major, 0xff is revision
- * ie gta01 -> 0x0100 (TODO, find revision info)
- * ie gta02 -> 0x0200 (TODO, find revision info)
- */
-uint32_t hardware_type; /* better way of doing this? */
-
-u_int
-initarm(void *arg)
-{
- extern cpu_kcore_hdr_t cpu_kcore_hdr;
- int loop;
- int loop1;
- u_int l1pagetable;
- pv_addr_t kernel_l1pt;
- paddr_t memstart;
- psize_t memsize;
- extern u_int32_t esym; /* &_end if no symbols are loaded */
-
-#if 0
- int led_data = 0;
-#endif
- /* early bus_space_map support */
- int (*map_func_save)(void *, bus_addr_t, bus_size_t, int,
- bus_space_handle_t *);
-#if 0
- struct bus_space tmp_bs_tag;
-
-
- /* XXX */
- /* start 32.768KHz OSC */
- ioreg_write(PXA2X0_CLKMAN_BASE + 0x08, 2);
-#endif
-
- /*
- * Heads up ... Setup the CPU / MMU / TLB functions
- */
- if (set_cpufuncs())
- panic("cpu not recognized!");
-
- /* Get ready for splfoo() */
- s3c2xx0_intr_bootstrap(INTCTL_VBASE);
-
-
-
-#if 0
- /* Calibrate the delay loop. */
-#endif
-
-#if 0
- /*
- * Okay, RedBoot has provided us with the following memory map:
- *
- * Physical Address Range Description
- * ----------------------- ----------------------------------
- * 0x00000000 - 0x01ffffff flash Memory (32MB)
- * 0x04000000 - 0x05ffffff Application flash Memory (32MB)
- * 0x08000000 - 0x080000ff I/O baseboard registers
- * 0x0a000000 - 0x0a0fffff SRAM (1MB)
- * 0x0c000000 - 0x0c0fffff Ethernet Controller
- * 0x0e000000 - 0x0e0fffff Ethernet Controller (Attribute)
- * 0x10000000 - 0x103fffff SA-1111 Companion Chip
- * 0x14000000 - 0x17ffffff Expansion Card (64MB)
- * 0x40000000 - 0x480fffff Processor Registers
- * 0xa0000000 - 0xa3ffffff SDRAM Bank 0 (64MB)
- *
- *
- * Virtual Address Range X C B Description
- * ----------------------- - - - ----------------------------------
- * 0x00000000 - 0x00003fff N Y Y SDRAM
- * 0x00004000 - 0x000fffff N Y N Boot ROM
- * 0x00100000 - 0x01ffffff N N N Application Flash
- * 0x04000000 - 0x05ffffff N N N Exp Application Flash
- * 0x08000000 - 0x080fffff N N N I/O baseboard registers
- * 0x0a000000 - 0x0a0fffff N N N SRAM
- * 0x40000000 - 0x480fffff N N N Processor Registers
- * 0xa0000000 - 0xa000ffff N Y N RedBoot SDRAM
- * 0xa0017000 - 0xa3ffffff Y Y Y SDRAM
- * 0xc0000000 - 0xcfffffff Y Y Y Cache Flush Region
- * (done by this routine)
- * 0xfd000000 - 0xfd0000ff N N N I/O baseboard registers
- * 0xfd100000 - 0xfd2fffff N N N Processor Registers.
- * 0xfd200000 - 0xfd2fffff N N N 0x10800000 registers
- *
- * The first level page table is at 0xa0004000. There are also
- * 2 second-level tables at 0xa0008000 and 0xa0008400.
- *
- */
-
-#endif
- {
- /*
- * Tweak U-boots's pagetable so that we can access to
- * some registers at same VA before and after installing
- * our page table.
- */
- paddr_t ttb = (paddr_t)read_ttb();
- map_io_area(ttb);
-
- cpu_tlb_flushD();
- }
-
- /*
- * Examine the boot args string for options we need to know about
- * now.
- */
- /* XXX should really be done after setting up the console, but we
- * XXX need to parse the console selection flags right now. */
- process_kernel_args((char *)0x30000000+KERNEL_OFFSET - MAX_BOOT_STRING - 1);
-
-
-#if 0
- /* setup GPIO for BTUART, in case bootloader doesn't take care of it */
- pxa2x0_gpio_bootstrap(ZAURUS_GPIO_VBASE);
- pxa2x0_gpio_set_function(42, GPIO_ALT_FN_1_IN);
- pxa2x0_gpio_set_function(43, GPIO_ALT_FN_2_OUT);
- pxa2x0_gpio_set_function(44, GPIO_ALT_FN_1_IN);
- pxa2x0_gpio_set_function(45, GPIO_ALT_FN_2_OUT);
-
- /* FFUART */
- pxa2x0_gpio_set_function(34, GPIO_ALT_FN_1_IN);
- pxa2x0_gpio_set_function(39, GPIO_ALT_FN_2_OUT);
- pxa2x0_gpio_set_function(35, GPIO_ALT_FN_1_IN);
- pxa2x0_gpio_set_function(40, GPIO_ALT_FN_2_OUT);
- pxa2x0_gpio_set_function(41, GPIO_ALT_FN_2_OUT);
-
- /* STUART */
- pxa2x0_gpio_set_function(46, GPIO_ALT_FN_2_IN);
- pxa2x0_gpio_set_function(47, GPIO_ALT_FN_1_OUT);
-#endif
-
- /* XXX */
- pmap_devmap_bootstrap(l1pagetable, smdk2410_devmap);
- /*
- * Temporarily replace bus_space_map() functions so that
- * console devices can get mapped.
- *
- * Note that this relies upon the fact that both regular
- * and a4x bus_space tags use the same map function.
- */
- map_func_save = s3c2xx0_bs_tag.bs_map;
- s3c2xx0_bs_tag.bs_map = bootstrap_bs_map;
-
- /* setup a serial console for very early boot */
- consinit();
-
-#ifdef KGDB
- kgdb_port_init();
-#endif
-
-
- /* Talk to the user */
- printf("\nOpenBSD/moko booting ...\n");
-
- sscom_dump_init_state();
-
- {
- /* XXX - all Zaurus have this for now, fix memory sizing */
- memstart = 0x30000000;
- memsize = 0x04000000; /* 64MB */
- }
-
-#define DEBUG
-#ifdef DEBUG
- printf("initarm: Configuring system ...\n");
-#endif
-
- /* Fake bootconfig structure for the benefit of pmap.c */
- /* XXX must make the memory description h/w independant */
- bootconfig.dramblocks = 1;
- bootconfig.dram[0].address = memstart;
- bootconfig.dram[0].pages = memsize / PAGE_SIZE;
-
- /*
- * Set up the variables that define the availablilty of
- * physical memory. For now, we're going to set
- * physical_freestart to 0x30000000+KERNEL_OFFSET (where the kernel
- * was loaded), and allocate the memory we need downwards.
- * If we get too close to the page tables that RedBoot
- * set up, we will panic. We will update physical_freestart
- * and physical_freeend later to reflect what pmap_bootstrap()
- * wants to see.
- *
- * XXX pmap_bootstrap() needs an enema.
- */
- physical_start = bootconfig.dram[0].address;
- physical_end = physical_start + (bootconfig.dram[0].pages * PAGE_SIZE);
-
- physical_freestart = 0x30009000UL;
- physical_freeend = 0x30000000UL+KERNEL_OFFSET;
-
- physmem = (physical_end - physical_start) / PAGE_SIZE;
-
-#ifdef DEBUG
- /* Tell the user about the memory */
- printf("physmemory: %d pages at 0x%08lx -> 0x%08lx\n", physmem,
- physical_start, physical_end - 1);
-#endif
-
- /*
- * Okay, the kernel starts 2MB in from the bottom of physical
- * memory. We are going to allocate our bootstrap pages downwards
- * from there.
- *
- * We need to allocate some fixed page tables to get the kernel
- * going. We allocate one page directory and a number of page
- * tables and store the physical addresses in the kernel_pt_table
- * array.
- *
- * The kernel page directory must be on a 16K boundary. The page
- * tables must be on 4K bounaries. What we do is allocate the
- * page directory on the first 16K boundary that we encounter, and
- * the page tables on 4K boundaries otherwise. Since we allocate
- * at least 3 L2 page tables, we are guaranteed to encounter at
- * least one 16K aligned region.
- */
-
-#ifdef VERBOSE_INIT_ARM
- printf("Allocating page tables\n");
-#endif
-
- free_pages = (physical_freeend - physical_freestart) / PAGE_SIZE;
-
-#ifdef VERBOSE_INIT_ARM
- printf("freestart = 0x%08lx, free_pages = %d (0x%08x)\n",
- physical_freestart, free_pages, free_pages);
-#endif
-
- /* Define a macro to simplify memory allocation */
-#define valloc_pages(var, np) \
- alloc_pages((var).pv_pa, (np)); \
- (var).pv_va = KERNEL_BASE + (var).pv_pa - physical_start;
-
-#define alloc_pages(var, np) \
- physical_freeend -= ((np) * PAGE_SIZE); \
- if (physical_freeend < physical_freestart) \
- panic("initarm: out of memory"); \
- (var) = physical_freeend; \
- free_pages -= (np); \
- memset((char *)(var), 0, ((np) * PAGE_SIZE));
-
- loop1 = 0;
- kernel_l1pt.pv_pa = 0;
- for (loop = 0; loop <= NUM_KERNEL_PTS; ++loop) {
- /* Are we 16KB aligned for an L1 ? */
- if (((physical_freeend - L1_TABLE_SIZE) & (L1_TABLE_SIZE - 1)) == 0
- && kernel_l1pt.pv_pa == 0) {
- valloc_pages(kernel_l1pt, L1_TABLE_SIZE / PAGE_SIZE);
- } else {
- valloc_pages(kernel_pt_table[loop1],
- L2_TABLE_SIZE / PAGE_SIZE);
- ++loop1;
- }
- }
-
- /* This should never be able to happen but better confirm that. */
- if (!kernel_l1pt.pv_pa || (kernel_l1pt.pv_pa & (L1_TABLE_SIZE-1)) != 0)
- panic("initarm: Failed to align the kernel page directory");
-
- /*
- * Allocate a page for the system page mapped to V0x00000000
- * This page will just contain the system vectors and can be
- * shared by all processes.
- */
- alloc_pages(systempage.pv_pa, 1);
-
- /* Allocate stacks for all modes */
- valloc_pages(irqstack, IRQ_STACK_SIZE);
- valloc_pages(abtstack, ABT_STACK_SIZE);
- valloc_pages(undstack, UND_STACK_SIZE);
- valloc_pages(kernelstack, UPAGES);
-
-#ifdef VERBOSE_INIT_ARM
- printf("IRQ stack: p0x%08lx v0x%08lx\n", irqstack.pv_pa,
- irqstack.pv_va);
- printf("ABT stack: p0x%08lx v0x%08lx\n", abtstack.pv_pa,
- abtstack.pv_va);
- printf("UND stack: p0x%08lx v0x%08lx\n", undstack.pv_pa,
- undstack.pv_va);
- printf("SVC stack: p0x%08lx v0x%08lx\n", kernelstack.pv_pa,
- kernelstack.pv_va);
-#endif
-
- /*
- * XXX Defer this to later so that we can reclaim the memory
- * XXX used by the RedBoot page tables.
- */
- alloc_pages(msgbufphys, round_page(MSGBUFSIZE) / PAGE_SIZE);
-
- /*
- * Ok we have allocated physical pages for the primary kernel
- * page tables
- */
-
-#ifdef VERBOSE_INIT_ARM
- printf("Creating L1 page table at 0x%08lx\n", kernel_l1pt.pv_pa);
-#endif
-
- /*
- * Now we start construction of the L1 page table
- * We start by mapping the L2 page tables into the L1.
- * This means that we can replace L1 mappings later on if necessary
- */
- l1pagetable = kernel_l1pt.pv_pa;
-
- /* Map the L2 pages tables in the L1 page table */
- pmap_link_l2pt(l1pagetable, 0x00000000,
- &kernel_pt_table[KERNEL_PT_SYS]);
-
- for (loop = 0; loop < KERNEL_PT_KERNEL_NUM; loop++)
- pmap_link_l2pt(l1pagetable, KERNEL_BASE + loop * 0x00400000,
- &kernel_pt_table[KERNEL_PT_KERNEL + loop]);
-
- for (loop = 0; loop < KERNEL_PT_VMDATA_NUM; loop++)
- pmap_link_l2pt(l1pagetable, KERNEL_VM_BASE + loop * 0x00400000,
- &kernel_pt_table[KERNEL_PT_VMDATA + loop]);
-
- /* update the top of the kernel VM */
- pmap_curmaxkvaddr =
- KERNEL_VM_BASE + (KERNEL_PT_VMDATA_NUM * 0x00400000);
-
-#ifdef VERBOSE_INIT_ARM
- printf("Mapping kernel\n");
-#endif
-
- /* Now we fill in the L2 pagetable for the kernel static code/data
- * and the symbol table. */
- {
- extern char etext[];
- size_t textsize = (u_int32_t) etext - KERNEL_TEXT_BASE;
- size_t totalsize = esym - KERNEL_TEXT_BASE;
- u_int logical;
-
- textsize = (textsize + PGOFSET) & ~PGOFSET;
- totalsize = (totalsize + PGOFSET) & ~PGOFSET;
-
- logical = KERNEL_OFFSET; /* offset of kernel in RAM */
-
- /* Update dump information */
- cpu_kcore_hdr.kernelbase = KERNEL_BASE;
- cpu_kcore_hdr.kerneloffs = logical;
- cpu_kcore_hdr.staticsize = totalsize;
-
- logical += pmap_map_chunk(l1pagetable, KERNEL_BASE + logical,
- physical_start + logical, textsize,
- VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
- pmap_map_chunk(l1pagetable, KERNEL_BASE + logical,
- physical_start + logical, totalsize - textsize,
- VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
- }
-
-#ifdef VERBOSE_INIT_ARM
- printf("Constructing L2 page tables\n");
-#endif
-
- /* Map the stack pages */
- pmap_map_chunk(l1pagetable, irqstack.pv_va, irqstack.pv_pa,
- IRQ_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
- pmap_map_chunk(l1pagetable, abtstack.pv_va, abtstack.pv_pa,
- ABT_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
- pmap_map_chunk(l1pagetable, undstack.pv_va, undstack.pv_pa,
- UND_STACK_SIZE * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
- pmap_map_chunk(l1pagetable, kernelstack.pv_va, kernelstack.pv_pa,
- UPAGES * PAGE_SIZE, VM_PROT_READ | VM_PROT_WRITE, PTE_CACHE);
-
- pmap_map_chunk(l1pagetable, kernel_l1pt.pv_va, kernel_l1pt.pv_pa,
- L1_TABLE_SIZE, VM_PROT_READ | VM_PROT_WRITE, PTE_PAGETABLE);
-
- for (loop = 0; loop < NUM_KERNEL_PTS; ++loop) {
- pmap_map_chunk(l1pagetable, kernel_pt_table[loop].pv_va,
- kernel_pt_table[loop].pv_pa, L2_TABLE_SIZE,
- VM_PROT_READ|VM_PROT_WRITE, PTE_PAGETABLE);
- }
-
- /* Map the vector page. */
-#if 1
- /* MULTI-ICE requires that page 0 is NC/NB so that it can download the
- * cache-clean code there. */
- pmap_map_entry(l1pagetable, vector_page, systempage.pv_pa,
- VM_PROT_READ|VM_PROT_WRITE, PTE_NOCACHE);
-#else
- pmap_map_entry(l1pagetable, vector_page, systempage.pv_pa,
- VM_PROT_READ|VM_PROT_WRITE, PTE_CACHE);
-#endif
-
-#if 1
- /*
- * map integrated peripherals at same address in l1pagetable
- * so that we can continue to use console.
- */
- pmap_devmap_bootstrap(l1pagetable, smdk2410_devmap);
-#endif
-
- /*
- * Now we have the real page tables in place so we can switch to them.
- * Once this is done we will be running with the REAL kernel page
- * tables.
- */
-
- /*
- * Update the physical_freestart/physical_freeend/free_pages
- * variables.
- */
- {
- physical_freestart = physical_start +
- (((esym + PGOFSET) & ~PGOFSET) - KERNEL_BASE);
- physical_freeend = physical_end;
- free_pages =
- (physical_freeend - physical_freestart) / PAGE_SIZE;
- }
-
- /* be a client to all domains */
- cpu_domains(0x55555555);
- /* Switch tables */
-#ifdef VERBOSE_INIT_ARM
- printf("freestart = 0x%08lx - %08lx, free_pages = %d (0x%x)\n",
- physical_freestart, physical_freeend, free_pages, free_pages);
- printf("switching to new L1 page table @%#lx...", kernel_l1pt.pv_pa);
-#endif
-
- /* set new intc register address so that splfoo() doesn't
- touch illegal address. */
- s3c2xx0_intr_bootstrap(INTCTL_VBASE);
-
-
- cpu_domains((DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2)) | DOMAIN_CLIENT);
- setttb(kernel_l1pt.pv_pa);
- cpu_tlb_flushID();
- cpu_domains(DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2));
-
- /*
- * Moved from cpu_startup() as data_abort_handler() references
- * this during uvm init
- */
- proc0paddr = (struct user *)kernelstack.pv_va;
- proc0.p_addr = proc0paddr;
-
- arm32_vector_init(ARM_VECTORS_LOW, ARM_VEC_ALL);
-
-#ifdef VERBOSE_INIT_ARM
- printf("bootstrap done.\n");
-#endif
-
-
- /*
- * Pages were allocated during the secondary bootstrap for the
- * stacks for different CPU modes.
- * We must now set the r13 registers in the different CPU modes to
- * point to these stacks.
- * Since the ARM stacks use STMFD etc. we must set r13 to the top end
- * of the stack memory.
- */
-#ifdef VERBOSE_INIT_ARM
- printf("init subsystems: stacks ");
-#endif
-
- set_stackptr(PSR_IRQ32_MODE,
- irqstack.pv_va + IRQ_STACK_SIZE * PAGE_SIZE);
- set_stackptr(PSR_ABT32_MODE,
- abtstack.pv_va + ABT_STACK_SIZE * PAGE_SIZE);
- set_stackptr(PSR_UND32_MODE,
- undstack.pv_va + UND_STACK_SIZE * PAGE_SIZE);
-
- /*
- * Well we should set a data abort handler.
- * Once things get going this will change as we will need a proper
- * handler.
- * Until then we will use a handler that just panics but tells us
- * why.
- * Initialisation of the vectors will just panic on a data abort.
- * This just fills in a slightly better one.
- */
-#ifdef VERBOSE_INIT_ARM
- printf("vectors ");
-#endif
- data_abort_handler_address = (u_int)data_abort_handler;
- prefetch_abort_handler_address = (u_int)prefetch_abort_handler;
- undefined_handler_address = (u_int)undefinedinstruction_bounce;
-
- /* Initialise the undefined instruction handlers */
-#ifdef VERBOSE_INIT_ARM
- printf("undefined ");
-#endif
- undefined_init();
-
- /* Load memory into UVM. */
-#ifdef VERBOSE_INIT_ARM
- printf("page ");
-#endif
- uvm_setpagesize(); /* initialize PAGE_SIZE-dependent variables */
- uvm_page_physload(atop(physical_freestart), atop(physical_freeend),
- atop(physical_freestart), atop(physical_freeend),
- VM_FREELIST_DEFAULT);
-
- /* Boot strap pmap telling it where the kernel page table is */
-#ifdef VERBOSE_INIT_ARM
- printf("pmap ");
-#endif
- pmap_bootstrap((pd_entry_t *)kernel_l1pt.pv_va, KERNEL_VM_BASE,
- KERNEL_VM_BASE + KERNEL_VM_SIZE);
-
- /* Update dump information */
- cpu_kcore_hdr.pmap_kernel_l1 = (u_int32_t)pmap_kernel()->pm_l1;
- cpu_kcore_hdr.pmap_kernel_l2 = (u_int32_t)&(pmap_kernel()->pm_l2);
-
-#ifdef __HAVE_MEMORY_DISK__
- md_root_setconf(memory_disk, sizeof memory_disk);
-#endif
-
-#ifdef IPKDB
- /* Initialise ipkdb */
- ipkdb_init();
- if (boothowto & RB_KDB)
- ipkdb_connect(0);
-#endif
-
-#ifdef KGDB
- if (boothowto & RB_KDB) {
- kgdb_debug_init = 1;
- kgdb_connect(1);
- }
-#endif
-
- /*
- * Restore proper bus_space operation, now that pmap is initialized.
- */
- s3c2xx0_bs_tag.bs_map = map_func_save;
-
-#ifdef DDB
- db_machine_init();
-
- /* Firmware doesn't load symbols. */
- ddb_init();
-
- if (boothowto & RB_KDB)
- Debugger();
-#endif
-
- /* We return the new stack pointer address */
- return(kernelstack.pv_va + USPACE_SVC_STACK_TOP);
-}
-
-const char *console = "glass";
-
-void
-process_kernel_args(char *args)
-{
- char *cp = args;
-
- if (cp == NULL || *(int *)cp != BOOT_STRING_MAGIC) {
- boothowto = RB_AUTOBOOT;
- return;
- }
-
- /* Eat the cookie */
- *(int *)cp = 0;
- cp += sizeof(int);
-
- boothowto = 0;
-
- /* Make a local copy of the bootargs */
- strncpy(bootargs, cp, MAX_BOOT_STRING - sizeof(int));
-
- cp = bootargs;
- boot_file = bootargs;
-
- /* Skip the kernel image filename */
- while (*cp != ' ' && *cp != 0)
- ++cp;
-
- if (*cp != 0)
- *cp++ = 0;
-
- while (*cp == ' ')
- ++cp;
-
- boot_args = cp;
-
- printf("bootfile: %s\n", boot_file);
- printf("bootargs: %s\n", boot_args);
-
- /* Setup pointer to boot flags */
- while (*cp != '-')
- if (*cp++ == '\0')
- return;
-
- for (;*++cp;) {
- int fl;
-
- fl = 0;
- switch(*cp) {
- case 'a':
- fl |= RB_ASKNAME;
- break;
- case 'c':
- fl |= RB_CONFIG;
- break;
- case 'd':
- fl |= RB_KDB;
- break;
- case 's':
- fl |= RB_SINGLE;
- break;
- /* XXX undocumented console switching flags */
- case '0':
- console = "ffuart";
- break;
- case '1':
- console = "btuart";
- break;
- case '2':
- console = "stuart";
- break;
- default:
- printf("unknown option `%c'\n", *cp);
- break;
- }
- boothowto |= fl;
- }
-}
-
-void
-consinit(void)
-{
- static int consinit_done = 0;
- int conunit;
-#if defined(SSCOM0CONSOLE) || defined(SSCOM1CONSOLE)
- bus_space_tag_t iot = &s3c2xx0_bs_tag;
-#endif
- int pclk;
-
-#if 0
- char *console = CONSDEVNAME;
-#endif
-
- if (consinit_done != 0)
- return;
-
- consinit_done = 1;
-
- s3c24x0_clock_freq2(CLKMAN_VBASE, NULL, NULL, &pclk);
-
-
- /* HORRID HACK */
- if (pclk == 66500000) {
- conunit = 0;
- hardware_type = 0x0100; /* what about revision? */
- } else if (pclk == 100000000) {
- conunit = 2;
- hardware_type = 0x0200; /* what about revision? */
- } else /* XXX */
- conunit = 0;
-
-#if NSSCOM > 0
- if (0 == s3c2410_sscom_cnattach(iot, conunit, comcnspeed,
- pclk, comcnmode))
- return;
-#if 0
- /* XXX - delete this block */
-#ifdef SSCOM1CONSOLE
- if (0 == s3c2410_sscom_cnattach(iot, 1, comcnspeed,
- pclk, comcnmode))
- return;
-#endif
-#endif /* delme */
-#endif /* NSSCOM */
-
- consinit_done = 0;
-}
-
-#ifdef KGDB
-void
-kgdb_port_init(void)
-{
-#if (NCOM > 0) && defined(COM_PXA2X0)
- paddr_t paddr;
- u_int cken;
-
- if (strcmp(kgdb_devname, "ffuart") == 0) {
- paddr = PXA2X0_FFUART_BASE;
- cken = CKEN_FFUART;
- } else if (strcmp(kgdb_devname, "btuart") == 0) {
- paddr = PXA2X0_BTUART_BASE;
- cken = CKEN_BTUART;
- } else if (strcmp(kgdb_devname, "stuart") == 0) {
- paddr = PXA2X0_STUART_BASE;
- cken = CKEN_STUART;
- irda_on(0);
- } else
- return;
-
- if (com_kgdb_attach_pxa2x0(&pxa2x0_a4x_bs_tag, paddr,
- kgdb_rate, PXA2X0_COM_FREQ, COM_TYPE_PXA2x0, comkgdbmode) == 0) {
- early_clkman(cken, 1);
- }
-#endif
-}
-#endif
-
-int glass_console = 0;
-
-void
-board_startup(void)
-{
- extern int lcd_cnattach(void (*)(u_int, int));
-
-#ifdef ENABLE_LCD_CONSOLE
-#if NWSDISPLAY > 0
- extern bus_addr_t comconsaddr;
- /*
- * Try to attach the display console now that VM services
- * are available.
- */
-
- if ((cputype & ~CPU_ID_XSCALE_COREREV_MASK) == CPU_ID_PXA27X) {
- if (strcmp(console, "glass") == 0) {
- printf("attempting to switch console to lcd screen\n");
- glass_console = 1;
- }
- if (glass_console == 1 && lcd_cnattach(early_clkman) == 0) {
- /*
- * Kill the existing serial console.
- * XXX need to bus_space_unmap resources and disable
- * clocks...
- */
- comconsaddr = 0;
-
- /*
- * Display the copyright notice again on the new console
- */
- extern const char copyright[];
- printf("%s\n", copyright);
- }
- }
-#endif
-#endif /* ENABLE_LCD_CONSOLE */
-
- if (boothowto & RB_CONFIG) {
-#ifdef BOOT_CONFIG
- user_config();
-#else
- printf("kernel does not support -c; continuing..\n");
-#endif
- }
-}
-
-static struct arm32_dma_range smdk2410_dma_ranges[1];
-
-bus_dma_tag_t
-s3c2xx0_bus_dma_init(struct arm32_bus_dma_tag *dma_tag_template)
-{
- extern paddr_t physical_start, physical_end;
- struct arm32_bus_dma_tag *dmat;
-
- smdk2410_dma_ranges[0].dr_sysbase = physical_start;
- smdk2410_dma_ranges[0].dr_busbase = physical_start;
- smdk2410_dma_ranges[0].dr_len = physical_end - physical_start;
-
-#if 1
- dmat = dma_tag_template;
-#else
- dmat = malloc(sizeof *dmat, M_DEVBUF, M_NOWAIT);
- if (dmat == NULL)
- return NULL;
- *dmat = *dma_tag_template;
-#endif
-
- dmat->_ranges = smdk2410_dma_ranges;
- dmat->_nranges = 1;
-
- return dmat;
-}
-
diff --git a/sys/arch/moko/moko/moko_start.S b/sys/arch/moko/moko/moko_start.S
deleted file mode 100644
index b3d6282068b..00000000000
--- a/sys/arch/moko/moko/moko_start.S
+++ /dev/null
@@ -1,174 +0,0 @@
-/* $OpenBSD: moko_start.S,v 1.1 2008/11/26 14:47:50 drahn Exp $ */
-
-/*
- * Copyright (c) 2002, 2003 Genetec Corporation. All rights reserved.
- * Written by Hiroyuki Bessho for Genetec Corporation.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of Genetec Corporation may not be used to endorse or
- * promote products derived from this software without specific prior
- * written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL GENETEC CORPORATION
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <machine/asm.h>
-#include <arm/armreg.h>
-#include <arm/pte.h>
-#include <arm/pmap.h> /* for PMAP_DOMAIN_KERNEL */
-
-#ifndef SDRAM_START
-#define SDRAM_START 0x30000000
-#endif
-
-/*
- * CPWAIT -- Canonical method to wait for CP15 update.
- * NOTE: Clobbers the specified temp reg.
- * copied from arm/arm/cpufunc_asm_xscale.S
- * XXX: better be in a common header file.
- */
-#define CPWAIT_BRANCH \
- sub pc, pc, #4
-
-#define CPWAIT(tmp) \
- mrc p15, 0, tmp, c2, c0, 0 /* arbitrary read of CP15 */ ;\
- mov tmp, tmp /* wait for it to complete */ ;\
- CPWAIT_BRANCH /* branch to next insn */
-
-/*
- * Kernel start routine for DBPXA250 (Lubbock)
- * this code is excuted at the very first after the kernel is loaded
- * by RedBoot.
- */
- .text
-
- .global _C_LABEL(moko_start)
-_C_LABEL(moko_start):
- /* Are we running on ROM ? */
- cmp pc, #0x06000000
- bhi moko_start_ram
-
- /* move me to RAM
- * XXX: we can use memcpy if it is PIC
- */
- ldr r1, Lcopy_size
- adr r0, _C_LABEL(moko_start)
- add r1, r1, #3
- mov r1, r1, LSR #2
- mov r2, #SDRAM_START
- add r2, r2, #0x00200000
- mov r4, r2
-
-5: ldr r3,[r0],#4
- str r3,[r2],#4
- subs r1,r1,#1
- bhi 5b
-
- cmp pc, r5
- /* Jump to RAM */
- ldr r0, Lstart_off
-
- blo 1f
- /* if we were running out of virtual mapped space, disable mmu */
- mov r2, #0
- mov r1, #(CPU_CONTROL_32BP_ENABLE | CPU_CONTROL_32BD_ENABLE)
- mcr 15, 0, r1, c1, c0, 0
- mcrne 15, 0, r2, c8, c7, 0 /* nail I+D TLB on ARMv4 and greater */
-
-1:
- add pc, r4, r0
-
-Lcopy_size: .word _edata-_C_LABEL(moko_start)
-Lstart_off: .word moko_start_ram-_C_LABEL(moko_start)
-
-moko_start_ram:
- /*
- * Kernel is loaded in SDRAM (0xa0200000..), and is expected to run
- * in VA 0xc0200000..
- */
-
- mrc p15, 0, r0, c2, c0, 0 /* get ttb prepared by redboot */
- adr r4, mmu_init_table2
-
-#define BUILD_STARTUP_PAGETABLE
-#ifdef BUILD_STARTUP_PAGETABLE
- mrc p15, 0, r2, c1, c0, 0
- mov r2, #0
- tst r2, #CPU_CONTROL_MMU_ENABLE /* we already have a page table? */
- bne 3f
-
- /* build page table from scratch */
- ldr r0, Lstartup_pagetable
- adr r4, mmu_init_table
- b 3f
-
-2:
- str r3, [r0, r2]
- add r2, r2, #4
- add r3, r3, #(L1_S_SIZE)
- adds r1, r1, #-1
- bhi 2b
-3:
- ldmia r4!, {r1,r2,r3} /* # of sections, PA|attr, VA */
- cmp r1, #0
- bne 2b
-#endif
-
- mcr p15, 0, r0, c2, c0, 0 /* Set TTB */
- mcr p15, 0, r0, c8, c7, 0 /* Flush TLB */
-
- /* Set the Domain Access register. Very important! */
- mov r0, #((DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2)) | DOMAIN_CLIENT)
- mcr p15, 0, r0, c3, c0, 0
-
- /* Enable MMU */
- mrc p15, 0, r0, c1, c0, 0
- orr r0, r0, #CPU_CONTROL_MMU_ENABLE
- mcr p15, 0, r0, c1, c0, 0
- CPWAIT(r0)
-
- /* Jump to kernel code in TRUE VA */
- adr r0, Lstart
- ldr pc, [r0]
-
-Lstart:
- .word start
-
-#define MMU_INIT(va,pa,n_sec,attr) \
- .word n_sec ; \
- .word 4*((va)>>L1_S_SHIFT) ; \
- .word (pa)|(attr) ;
-
-#ifdef BUILD_STARTUP_PAGETABLE
-#ifndef STARTUP_PAGETABLE_ADDR
-#define STARTUP_PAGETABLE_ADDR SDRAM_START+0x4000
-#endif
-Lstartup_pagetable: .word STARTUP_PAGETABLE_ADDR
-mmu_init_table:
- /* fill all table VA==PA */
- MMU_INIT(0x00000000, 0x00000000, 1<<(32-L1_S_SHIFT), L1_TYPE_S|L1_S_AP(AP_KRW))
- /* map SDRAM VA==PA, WT cacheable */
- MMU_INIT(SDRAM_START, SDRAM_START, 64, L1_TYPE_S|L1_S_C|L1_S_AP(AP_KRW))
-#endif
-mmu_init_table2:
- /* map VA 0xc0000000..0xc3ffffff to PA 0xa0000000..0xa3ffffff */
- MMU_INIT(0xc0000000, SDRAM_START, 64, L1_TYPE_S|L1_S_C|L1_S_AP(AP_KRW))
-
- .word 0 /* end of table */