summaryrefslogtreecommitdiff
path: root/sys/dev/cardbus
diff options
context:
space:
mode:
Diffstat (limited to 'sys/dev/cardbus')
-rw-r--r--sys/dev/cardbus/com_cardbus.c184
1 files changed, 9 insertions, 175 deletions
diff --git a/sys/dev/cardbus/com_cardbus.c b/sys/dev/cardbus/com_cardbus.c
index 0c9a7fdb3b9..0690e63492f 100644
--- a/sys/dev/cardbus/com_cardbus.c
+++ b/sys/dev/cardbus/com_cardbus.c
@@ -1,4 +1,4 @@
-/* $OpenBSD: com_cardbus.c,v 1.17 2005/07/25 01:38:15 pascoe Exp $ */
+/* $OpenBSD: com_cardbus.c,v 1.18 2005/09/26 22:32:06 miod Exp $ */
/* $NetBSD: com_cardbus.c,v 1.4 2000/04/17 09:21:59 joda Exp $ */
/*
@@ -101,7 +101,6 @@ void com_cardbus_disable(struct com_softc *);
struct csdev *com_cardbus_find_csdev(struct cardbus_attach_args *);
int com_cardbus_gofigure(struct cardbus_attach_args *,
struct com_cardbus_softc *);
-void com_cardbus_attach2(struct com_softc *, u_char);
#if NCOM_CARDBUS
struct cfattach com_cardbus_ca = {
@@ -276,9 +275,6 @@ com_cardbus_attach(struct device *parent, struct device *self, void *aux)
sc->sc_iobase = csc->cc_addr;
sc->sc_frequency = COM_FREQ;
- timeout_set(&sc->sc_dtr_tmo, com_raisedtr, sc);
- timeout_set(&sc->sc_diag_tmo, comdiag, sc);
-
sc->enable = com_cardbus_enable;
sc->disable = com_cardbus_disable;
sc->enabled = 0;
@@ -292,7 +288,14 @@ com_cardbus_attach(struct device *parent, struct device *self, void *aux)
if (com_cardbus_enable(sc))
printf(": function enable failed\n");
sc->enabled = 1;
- com_cardbus_attach2(sc, csc->cc_bug);
+
+ sc->sc_hwflags = 0;
+ sc->sc_swflags = 0;
+
+ if (csc->cc_bug & BUG_BROADCOM)
+ sc->sc_fifolen = 15;
+
+ com_attach_subr(sc);
}
void
@@ -384,172 +387,3 @@ com_cardbus_detach(struct device *self, int flags)
return (0);
}
-
-
-/*
- * XXX This should be handled by a generic attach
- */
-void
-com_cardbus_attach2(struct com_softc *sc, u_char bug)
-{
- bus_space_tag_t iot = sc->sc_iot;
- bus_space_handle_t ioh = sc->sc_ioh;
- u_int8_t lcr;
-
- sc->sc_hwflags = 0;
- sc->sc_swflags = 0;
-
- /*
- * Probe for all known forms of UART.
- */
- lcr = bus_space_read_1(iot, ioh, com_lcr);
-
- bus_space_write_1(iot, ioh, com_lcr, LCR_EFR);
- bus_space_write_1(iot, ioh, com_efr, 0);
- bus_space_write_1(iot, ioh, com_lcr, 0);
-
- bus_space_write_1(iot, ioh, com_fifo, FIFO_ENABLE);
- delay(100);
-
- switch(bus_space_read_1(iot, ioh, com_iir) >> 6) {
- case 0:
- sc->sc_uarttype = COM_UART_16450;
- break;
- case 2:
- sc->sc_uarttype = COM_UART_16550;
- break;
- case 3:
- sc->sc_uarttype = COM_UART_16550A;
- break;
- default:
- sc->sc_uarttype = COM_UART_UNKNOWN;
- break;
- }
-
- if (sc->sc_uarttype == COM_UART_16550A) { /* Probe for ST16650s */
- bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB);
- if (bus_space_read_1(iot, ioh, com_efr) == 0) {
- sc->sc_uarttype = COM_UART_ST16650;
- } else {
- bus_space_write_1(iot, ioh, com_lcr, LCR_EFR);
- if (bus_space_read_1(iot, ioh, com_efr) == 0)
- sc->sc_uarttype = COM_UART_ST16650V2;
- }
- }
-
- if (sc->sc_uarttype == COM_UART_16550A) { /* Probe for TI16750s */
- bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB);
- bus_space_write_1(iot, ioh, com_fifo,
- FIFO_ENABLE | FIFO_ENABLE_64BYTE);
- if ((bus_space_read_1(iot, ioh, com_iir) >> 5) == 7) {
-#if 0
- bus_space_write_1(iot, ioh, com_lcr, 0);
- if ((bus_space_read_1(iot, ioh, com_iir) >> 5) == 6)
-#endif
- sc->sc_uarttype = COM_UART_TI16750;
- }
- bus_space_write_1(iot, ioh, com_fifo, FIFO_ENABLE);
- }
-
-#if NPCCOM > 0
-#ifdef i386
- if (sc->sc_uarttype == COM_UART_ST16650V2) { /* Probe for XR16850s */
- u_int8_t dlbl, dlbh;
-
- /* Enable latch access and get the current values. */
- bus_space_write_1(iot, ioh, com_lcr, lcr | LCR_DLAB);
- dlbl = bus_space_read_1(iot, ioh, com_dlbl);
- dlbh = bus_space_read_1(iot, ioh, com_dlbh);
-
- /* Zero out the latch divisors */
- bus_space_write_1(iot, ioh, com_dlbl, 0);
- bus_space_write_1(iot, ioh, com_dlbh, 0);
-
- if (bus_space_read_1(iot, ioh, com_dlbh) == 0x10) {
- sc->sc_uarttype = COM_UART_XR16850;
- sc->sc_uartrev = bus_space_read_1(iot, ioh, com_dlbl);
- }
-
- /* Reset to original. */
- bus_space_write_1(iot, ioh, com_dlbl, dlbl);
- bus_space_write_1(iot, ioh, com_dlbh, dlbh);
- }
-#endif
-#endif
-
- /* Reset the LCR (latch access is probably enabled). */
- bus_space_write_1(iot, ioh, com_lcr, lcr);
- if (sc->sc_uarttype == COM_UART_16450) { /* Probe for 8250 */
- u_int8_t scr0, scr1, scr2;
-
- scr0 = bus_space_read_1(iot, ioh, com_scratch);
- bus_space_write_1(iot, ioh, com_scratch, 0xa5);
- scr1 = bus_space_read_1(iot, ioh, com_scratch);
- bus_space_write_1(iot, ioh, com_scratch, 0x5a);
- scr2 = bus_space_read_1(iot, ioh, com_scratch);
- bus_space_write_1(iot, ioh, com_scratch, scr0);
-
- if ((scr1 != 0xa5) || (scr2 != 0x5a))
- sc->sc_uarttype = COM_UART_8250;
- }
-
- /*
- * Print UART type and initialize ourself.
- */
- sc->sc_fifolen = 1; /* default */
- printf(" ");
- switch (sc->sc_uarttype) {
- case COM_UART_UNKNOWN:
- printf("unknown uart\n");
- break;
- case COM_UART_8250:
- printf("ns8250, no fifo\n");
- break;
- case COM_UART_16450:
- printf("ns16450, no fifo\n");
- break;
- case COM_UART_16550:
- printf("ns16550, no working fifo\n");
- break;
- case COM_UART_16550A:
- if (bug & BUG_BROADCOM) {
- printf("Broadcom ns16550a, 15 byte fifo\n");
- SET(sc->sc_hwflags, COM_HW_FIFO);
- sc->sc_fifolen = 15;
- break;
- }
- printf("ns16550a, 16 byte fifo\n");
- SET(sc->sc_hwflags, COM_HW_FIFO);
- sc->sc_fifolen = 16;
- break;
- case COM_UART_ST16650:
- printf("st16650, no working fifo\n");
- break;
- case COM_UART_ST16650V2:
- printf("st16650, 32 byte fifo\n");
- SET(sc->sc_hwflags, COM_HW_FIFO);
- sc->sc_fifolen = 32;
- break;
- case COM_UART_TI16750:
- printf("ti16750, 64 byte fifo\n");
- SET(sc->sc_hwflags, COM_HW_FIFO);
- sc->sc_fifolen = 64;
- break;
-#if NPCCOM > 0
-#ifdef i386
- case COM_UART_XR16850:
- printf("xr16850 (rev %d), 128 byte fifo\n", sc->sc_uartrev);
- SET(sc->sc_hwflags, COM_HW_FIFO);
- sc->sc_fifolen = 128;
- break;
-#endif
-#endif
- default:
- panic("comattach: bad fifo type");
- }
-
- /* clear and disable fifo */
- bus_space_write_1(iot, ioh, com_fifo, FIFO_RCV_RST | FIFO_XMT_RST);
- (void)bus_space_read_1(iot, ioh, com_data);
- bus_space_write_1(iot, ioh, com_fifo, 0);
-}