summaryrefslogtreecommitdiff
path: root/sys/dev/ic/espreg.h
diff options
context:
space:
mode:
Diffstat (limited to 'sys/dev/ic/espreg.h')
-rw-r--r--sys/dev/ic/espreg.h74
1 files changed, 74 insertions, 0 deletions
diff --git a/sys/dev/ic/espreg.h b/sys/dev/ic/espreg.h
new file mode 100644
index 00000000000..02993943b89
--- /dev/null
+++ b/sys/dev/ic/espreg.h
@@ -0,0 +1,74 @@
+/*-
+ * Copyright (c) 1995 Sean E. Fagin, John M Vinopal.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the author nor the names of contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#ifndef _ESPREG_H_
+#define _ESPREG_H_
+
+/*
+ * Definitions for Hayes ESP serial cards.
+ */
+
+/*
+ * CMD1 and CMD2 are the command ports, offsets from <esp_iobase>.
+ */
+#define ESP_CMD1 4
+#define ESP_CMD2 5
+
+/*
+ * STAT1 and STAT2 are to get return values and status bytes
+ */
+#define ESP_STATUS1 ESP_CMD1
+#define ESP_STATUS2 ESP_CMD2
+
+/*
+ * Commands. Commands are given by writing the command value to
+ * ESP_CMD1 and then writing or reading some number of bytes from
+ * ESP_CMD2 or ESP_STATUS2.
+ */
+#define ESP_GETTEST 0x01 /* self-test command (1 byte + extras) */
+#define ESP_GETDIPS 0x02 /* get on-board DIP switches (1 byte) */
+#define ESP_SETFLOWTYPE 0x08 /* set type of flow-control (2 bytes) */
+#define ESP_SETRXFLOW 0x0a /* set Rx FIFO flow control levels (4 bytes) */
+#define ESP_SETMODE 0x10 /* set board mode (1 byte) */
+
+/* Mode bits (ESP_SETMODE). */
+#define ESP_MODE_FIFO 0x02 /* act like a 16550 (compatibility mode) */
+#define ESP_MODE_RTS 0x04 /* use RTS hardware flow control */
+#define ESP_MODE_SCALE 0x80 /* scale FIFO trigger levels */
+
+/* Flow control type bits (ESP_SETFLOWTYPE). */
+#define ESP_FLOW_RTS 0x04 /* cmd1: local Rx sends RTS flow control */
+#define ESP_FLOW_CTS 0x10 /* cmd2: local transmitter responds to CTS */
+
+/* Used by ESP_SETRXFLOW. */
+#define RXHIGHWATER 768
+#define RXLOWWATER 512
+#define HIBYTE(w) (((w) >> 8) & 0xff)
+#define LOBYTE(w) ((w) & 0xff)
+
+#endif /* !_ESPREG_H_ */