diff options
Diffstat (limited to 'sys/dev/ic')
| -rw-r--r-- | sys/dev/ic/aic7xxx.c | 250 | ||||
| -rw-r--r-- | sys/dev/ic/aic7xxxreg.h | 26 | ||||
| -rw-r--r-- | sys/dev/ic/aic7xxxvar.h | 12 |
3 files changed, 210 insertions, 78 deletions
diff --git a/sys/dev/ic/aic7xxx.c b/sys/dev/ic/aic7xxx.c index ec8a51fe60a..327d15f3daa 100644 --- a/sys/dev/ic/aic7xxx.c +++ b/sys/dev/ic/aic7xxx.c @@ -1,4 +1,4 @@ -/* $OpenBSD: aic7xxx.c,v 1.15 1997/01/15 05:50:38 deraadt Exp $ */ +/* $OpenBSD: aic7xxx.c,v 1.16 1997/04/10 22:52:18 deraadt Exp $ */ /* $NetBSD: aic7xxx.c,v 1.17 1996/10/21 22:34:04 thorpej Exp $ */ /* @@ -94,11 +94,11 @@ * queue), the SCB is inserted onto the tail of the waiting_scbs list and * we attempt to run this queue down. * - * 4) ahc_run_waiing_queues() looks at both the assigned_scbs and waiting_scbs + * 4) ahc_run_waiting_queues() looks at both the assigned_scbs and waiting_scbs * queues. In the case of the assigned_scbs, the commands are immediately * downloaded and started. For waiting_scbs, we page in all that we can * ensuring we don't create a resource deadlock (see comments in - * ahc_run_waing_queues()). + * ahc_run_waiting_queues()). * * 5) After we handle a bunch of command completes, we also try running the * queues since many SCBs may have disconnected since the last command @@ -110,7 +110,7 @@ * queue for later use. * * 7) The driver handles page-in requests from the sequencer in response to - * the NO_MATCH sequencer interrupt. For tagged commands, the approprite + * the NO_MATCH sequencer interrupt. For tagged commands, the appropriate * SCB is easily found since the tag is a direct index into our kernel SCB * array. For non-tagged commands, we keep a separate array of 16 pointers * that point to the single possible SCB that was paged out for that target. @@ -156,10 +156,16 @@ #define bootverbose 1 #define DEBUGTARG DEBUGTARGET -#if DEBUGTARG < 0 /* Negative numbrs for disabling cause warnings */ +#if DEBUGTARG < 0 /* Negative numbers for disabling cause warnings */ #undef DEBUGTARG #define DEBUGTARG 17 #endif +#ifdef alpha /* XXX */ +/* XXX XXX NEED REAL DMA MAPPING SUPPORT XXX XXX */ +extern vm_offset_t alpha_XXX_dmamap(vm_offset_t); +#undef vtophys +#define vtophys(va) alpha_XXX_dmamap((vm_offset_t) va) +#endif /* alpha */ #endif /* defined(__NetBSD__) || defined(__OpenBSD__) */ #include <sys/kernel.h> @@ -326,6 +332,12 @@ static void ahc_construct_sdtr __P((struct ahc_data *ahc, int start_byte, static void ahc_construct_wdtr __P((struct ahc_data *ahc, int start_byte, u_int8_t bus_width)); +#if defined(__NetBSD__) || defined(__OpenBSD__) /* XXX */ +static void ahc_xxx_enqueue __P((struct ahc_data *ahc, + struct scsi_xfer *xs, int infront)); +static struct scsi_xfer *ahc_xxx_dequeue __P((struct ahc_data *ahc)); +#endif + #if defined(__FreeBSD__) char *ahc_name(ahc) @@ -371,7 +383,7 @@ static struct { char *errmesg; } hard_error[] = { { ILLHADDR, "Illegal Host Access" }, - { ILLSADDR, "Illegal Sequencer Address referrenced" }, + { ILLSADDR, "Illegal Sequencer Address referenced" }, { ILLOPCODE, "Illegal Opcode in sequencer program" }, { PARERR, "Sequencer Ram Parity Error" } }; @@ -406,7 +418,7 @@ static int ahc_num_syncrates = sizeof(ahc_syncrates) / sizeof(ahc_syncrates[0]); /* - * Allocate a controller structures for a new device and initialize it. + * Allocate a controller structure for a new device and initialize it. * ahc_reset should be called before now since we assume that the card * is paused. */ @@ -580,12 +592,12 @@ ahc_scsirate(ahc, scsirate, period, offset, channel, target ) } } if (i >= ahc_num_syncrates) { - /* Use asyncronous transfers. */ + /* Use asynchronous transfers. */ *scsirate = 0; *period = 0; *offset = 0; if (bootverbose) - printf("%s: target %d using asyncronous transfers\n", + printf("%s: target %d using asynchronous transfers\n", ahc_name(ahc), target ); } /* @@ -609,24 +621,6 @@ ahc_scsirate(ahc, scsirate, period, offset, channel, target ) AHC_OUTB(ahc, SXFRCTL0, sxfrctl0); } -#if defined(__OpenBSD__) -/* XXX we'll get rid of this soon */ -#define scsiprint ahcprint - -int ahcprint __P((void *, const char *)); - -int -ahcprint(aux, name) - void *aux; - const char *name; -{ - - if (name != NULL) - printf("%s: scsibus ", name); - return UNCONF; -} -#endif - /* * Attach all the sub-devices we can find */ @@ -638,6 +632,13 @@ ahc_attach(ahc) struct scsibus_data *scbus; #endif +#if defined(__NetBSD__) || defined(__OpenBSD__) /* XXX */ + /* + * Initialize the software queue. + */ + LIST_INIT(&ahc->sc_xxxq); +#endif + #ifdef AHC_BROKEN_CACHE if (cpu_class == CPUCLASS_386) /* doesn't have "wbinvd" instruction */ ahc_broken_cache = 0; @@ -727,13 +728,6 @@ ahc_attach(ahc) } #elif defined(__NetBSD__) || defined (__OpenBSD__) /* - * XXX - Update MI SCSI code - * - * if(ahc->type & AHC_WIDE) - * max target of both channel A and B = 15; - */ - - /* * ask the adapter what subunits are present */ if ((ahc->flags & AHC_CHANNEL_B_PRIMARY) == 0) { @@ -876,13 +870,13 @@ ahc_run_waiting_queues(ahc) /* * We have to be careful about when we allow * an SCB to be paged out. There must always - * be at least one slot availible for a + * be at least one slot available for a * reconnecting target in case it references * an SCB that has been paged out. Our * heuristic is that either the disconnected * list has at least two entries in it or * there is one entry and the sequencer is - * activily working on an SCB which implies that + * actively working on an SCB which implies that * it will either complete or disconnect before * another reconnection can occur. */ @@ -980,7 +974,7 @@ ahc_intr(arg) intstat = AHC_INB(ahc, INTSTAT); /* * Is this interrupt for me? or for - * someone who is sharing my interrupt + * someone who is sharing my interrupt? */ if (!(intstat & INT_PEND)) #if defined(__FreeBSD__) @@ -1355,7 +1349,7 @@ ahc_handle_seqint(ahc, intstat) case SEND_REJECT: { u_char rejbyte = AHC_INB(ahc, REJBYTE); - printf("%s:%c:%d: Warning - unknown message recieved from " + printf("%s:%c:%d: Warning - unknown message received from " "target (0x%x). Rejecting\n", ahc_name(ahc), channel, target, rejbyte); break; @@ -1566,8 +1560,8 @@ ahc_handle_seqint(ahc, intstat) targ_scratch &= 0xf0; ahc->needsdtr &= ~targ_mask; ahc->sdtrpending &= ~targ_mask; - printf("%s:%c:%d: refuses syncronous negotiation. " - "Using asyncronous transfers\n", + printf("%s:%c:%d: refuses synchronous negotiation. " + "Using asynchronous transfers\n", ahc_name(ahc), channel, target); } else { @@ -1635,6 +1629,7 @@ ahc_handle_seqint(ahc, intstat) #ifdef AHC_DEBUG if(ahc_debug & AHC_SHOWSENSE) { + sc_print_addr(xs->sc_link); printf("requests Check Status\n"); } @@ -1659,7 +1654,6 @@ ahc_handle_seqint(ahc, intstat) sc->byte2 = xs->sc_link->lun << 5; sc->length = sizeof(struct scsi_sense_data); sc->control = 0; - sg->addr = KVTOPHYS(&xs->sense); sg->len = sizeof(struct scsi_sense_data); @@ -1794,7 +1788,7 @@ ahc_handle_seqint(ahc, intstat) * the target on a reconnect. */ sc_print_addr(xs->sc_link); - printf("invalid tag recieved -- sending ABORT_TAG\n"); + printf("invalid tag received -- sending ABORT_TAG\n"); xs->error = XS_DRIVER_STUFFUP; untimeout(ahc_timeout, (caddr_t)scb); ahc_done(ahc, scb); @@ -2021,6 +2015,19 @@ ahc_done(ahc, scb) #endif ahc_free_scb(ahc, scb, xs->flags); scsi_done(xs); + +#if defined(__NetBSD__) || defined(__OpenBSD__) /* XXX */ + /* + * If there are entries in the software queue, try to + * run the first one. We should be more or less guaranteed + * to succeed, since we just freed an SCB. + * + * NOTE: ahc_scsi_cmd() relies on our calling it with + * the first entry in the queue. + */ + if (ahc->sc_xxxq.lh_first != NULL) + (void) ahc_scsi_cmd(ahc->sc_xxxq.lh_first); +#endif /* __NetBSD__ || __OpenBSD__ */ } /* @@ -2150,7 +2157,7 @@ ahc_init(ahc) /* Reset the bus */ #if (!defined(__NetBSD__) && !defined(__OpenBSD__)) || defined(DEBUG) if(bootverbose) - printf("%s: Reseting Channel B\n", + printf("%s: Resetting Channel B\n", ahc_name(ahc)); #endif AHC_OUTB(ahc, SCSISEQ, SCSIRSTO); @@ -2179,7 +2186,7 @@ ahc_init(ahc) /* Reset the bus */ #if (!defined(__NetBSD__) && !defined(__OpenBSD__)) || defined(DEBUG) if(bootverbose) - printf("%s: Reseting Channel A\n", ahc_name(ahc)); + printf("%s: Resetting Channel A\n", ahc_name(ahc)); #endif AHC_OUTB(ahc, SCSISEQ, SCSIRSTO); @@ -2195,8 +2202,8 @@ ahc_init(ahc) * Look at the information that board initialization or * the board bios has left us. In the lower four bits of each * target's scratch space any value other than 0 indicates - * that we should initiate syncronous transfers. If it's zero, - * the user or the BIOS has decided to disable syncronous + * that we should initiate synchronous transfers. If it's zero, + * the user or the BIOS has decided to disable synchronous * negotiation to that target so we don't activate the needsdtr * flag. */ @@ -2229,7 +2236,7 @@ ahc_init(ahc) if(target_settings & 0x0f){ ahc->needsdtr_orig |= (0x01 << i); - /*Default to a asyncronous transfers(0 offset)*/ + /*Default to asynchronous transfers(0 offset)*/ target_settings &= 0xf0; } if(target_settings & 0x80){ @@ -2287,7 +2294,7 @@ ahc_init(ahc) ahc->needwdtr, ahc->discenable); #endif /* - * Set the number of availible SCBs + * Set the number of available SCBs */ AHC_OUTB(ahc, SCBCOUNT, ahc->maxhscbs); @@ -2299,7 +2306,7 @@ ahc_init(ahc) /* * QCount mask to deal with broken aic7850s that - * sporatically get garbage in the upper bits of + * sporadically get garbage in the upper bits of * their QCount registers. */ AHC_OUTB(ahc, QCNTMASK, ahc->qcntmask); @@ -2364,6 +2371,51 @@ ahcminphys(bp) #endif } +#if defined(__NetBSD__) || defined(__OpenBSD__) /* XXX */ +/* + * Insert a scsi_xfer into the software queue. We overload xs->free_list + * to to ensure we don't run into a queue resource shortage, and keep + * a pointer to the last entry around to make insertion O(C). + */ +static void +ahc_xxx_enqueue(ahc, xs, infront) + struct ahc_data *ahc; + struct scsi_xfer *xs; + int infront; +{ + + if (infront || ahc->sc_xxxq.lh_first == NULL) { + if (ahc->sc_xxxq.lh_first == NULL) + ahc->sc_xxxqlast = xs; + LIST_INSERT_HEAD(&ahc->sc_xxxq, xs, free_list); + return; + } + + LIST_INSERT_AFTER(ahc->sc_xxxqlast, xs, free_list); + ahc->sc_xxxqlast = xs; +} + +/* + * Pull a scsi_xfer off the front of the software queue. When we + * pull the last one off, we need to clear the pointer to the last + * entry. + */ +static struct scsi_xfer * +ahc_xxx_dequeue(ahc) + struct ahc_data *ahc; +{ + struct scsi_xfer *xs; + + xs = ahc->sc_xxxq.lh_first; + LIST_REMOVE(xs, free_list); + + if (ahc->sc_xxxq.lh_first == NULL) + ahc->sc_xxxqlast = NULL; + + return (xs); +} +#endif + /* * start a scsi operation given the command and * the data address, target, and lun all of which @@ -2376,12 +2428,15 @@ ahc_scsi_cmd(xs) struct scb *scb; struct ahc_dma_seg *sg; int seg; /* scatter gather seg being worked on */ - int thiskv; + unsigned long thiskv, nextkv; physaddr thisphys, nextphys; int bytes_this_seg, bytes_this_page, datalen, flags; struct ahc_data *ahc; u_short mask; int s; +#if defined(__NetBSD__) || defined(__OpenBSD__) /* XXX */ + int dontqueue = 0, fromqueue = 0; +#endif ahc = (struct ahc_data *)xs->sc_link->adapter_softc; mask = (0x01 << (xs->sc_link->target @@ -2390,7 +2445,53 @@ ahc_scsi_cmd(xs) #elif defined(__NetBSD__) || defined(__OpenBSD__) | (IS_SCSIBUS_B(ahc, xs->sc_link) ? SELBUSB : 0) )); #endif + SC_DEBUG(xs->sc_link, SDEV_DB2, ("ahc_scsi_cmd\n")); + +#if defined(__NetBSD__) || (__OpenBSD__) /* XXX */ + /* must protect the queue */ + s = splbio(); + + /* + * If we're running the queue from ahc_done(), we're called + * with the first entry in the queue as our argument. + * Pull it off; if we can't run the job, it will get placed + * back at the front. + */ + if (xs == ahc->sc_xxxq.lh_first) { + xs = ahc_xxx_dequeue(ahc); + fromqueue = 1; + goto get_scb; + } + + /* determine safety of software queueing */ + dontqueue = xs->flags & SCSI_POLL; + + /* + * Handle situations where there's already entries in the + * queue. + */ + if (ahc->sc_xxxq.lh_first != NULL) { + /* + * If we can't queue, we have to abort, since + * we have to preserve order. + */ + if (dontqueue) { + splx(s); + xs->error = XS_DRIVER_STUFFUP; + return (TRY_AGAIN_LATER); + } + + /* + * Swap with the first queue entry. + */ + ahc_xxx_enqueue(ahc, xs, 0); + xs = ahc_xxx_dequeue(ahc); + fromqueue = 1; + } + + get_scb: +#endif /* __NetBSD__ || __OpenBSD__ */ /* * get an scb to use. If the transfer * is from a buf (possibly from interrupt time) @@ -2406,9 +2507,36 @@ ahc_scsi_cmd(xs) xs->flags |= INUSE; } if (!(scb = ahc_get_scb(ahc, flags))) { +#if defined(__NetBSD__) || defined(__OpenBSD__) /* XXX */ + /* + * If we can't queue, we lose. + */ + if (dontqueue) { + splx(s); + xs->error = XS_DRIVER_STUFFUP; + return (TRY_AGAIN_LATER); + } + + /* + * If we were pulled off the queue, put ourselves + * back in the front, otherwise tack ourselves onto + * the end. + */ + ahc_xxx_enqueue(ahc, xs, fromqueue); + + splx(s); + return (SUCCESSFULLY_QUEUED); +#else xs->error = XS_DRIVER_STUFFUP; return (TRY_AGAIN_LATER); +#endif /* __NetBSD__ || __OpenBSD__ */ } + +#if defined(__NetBSD__) || defined(__OpenBSD__) + /* we're done playing with the queue */ + splx(s); +#endif + SC_DEBUG(xs->sc_link, SDEV_DB3, ("start scb(%p)\n", scb)); scb->xs = xs; if (flags & SCSI_RESET) { @@ -2462,7 +2590,7 @@ ahc_scsi_cmd(xs) SC_DEBUG(xs->sc_link, SDEV_DB4, ("%ld @%p:- ", xs->datalen, xs->data)); datalen = xs->datalen; - thiskv = (int) xs->data; + thiskv = (unsigned long) xs->data; thisphys = KVTOPHYS(thiskv); while ((datalen) && (seg < AHC_NSEG)) { @@ -2486,15 +2614,17 @@ ahc_scsi_cmd(xs) + PAGE_SIZE; bytes_this_page = nextphys - thisphys; /**** or the data ****/ - bytes_this_page = min(bytes_this_page ,datalen); + bytes_this_page = min(bytes_this_page, datalen); bytes_this_seg += bytes_this_page; datalen -= bytes_this_page; /* get more ready for the next page */ - thiskv = (thiskv & (~(PAGE_SIZE - 1))) - + PAGE_SIZE; + nextkv = thiskv; + nextkv &= ~((unsigned long) PAGE_SIZE - 1); + nextkv += PAGE_SIZE; if (datalen) - thisphys = KVTOPHYS(thiskv); + thisphys = KVTOPHYS(nextkv); + thiskv = nextkv; } /* * next page isn't contiguous, finish the seg @@ -2586,7 +2716,7 @@ ahc_scsi_cmd(xs) /* - * A scb (and hence an scb entry on the board is put onto the + * A scb (and hence an scb entry on the board) is put onto the * free list. */ static void @@ -2609,7 +2739,7 @@ ahc_free_scb(ahc, scb, flags) STAILQ_INSERT_HEAD(&ahc->page_scbs, scb, links); if(!scb->links.stqe_next && !ahc->free_scbs.stqh_first) /* - * If there were no SCBs availible, wake anybody waiting + * If there were no SCBs available, wake anybody waiting * for one to come free. */ wakeup((caddr_t)&ahc->free_scbs); @@ -2636,7 +2766,7 @@ ahc_free_scb(ahc, scb, flags) STAILQ_INSERT_HEAD(&ahc->page_scbs, scb, links); if(!scb->links.stqe_next && !ahc->free_scbs.stqh_first) /* - * If there were no SCBs availible, wake anybody waiting + * If there were no SCBs available, wake anybody waiting * for one to come free. */ wakeup((caddr_t)&ahc->free_scbs); @@ -2645,7 +2775,7 @@ ahc_free_scb(ahc, scb, flags) STAILQ_INSERT_HEAD(&ahc->free_scbs, scb, links); if(!scb->links.stqe_next && !ahc->page_scbs.stqh_first) /* - * If there were no SCBs availible, wake anybody waiting + * If there were no SCBs available, wake anybody waiting * for one to come free. */ wakeup((caddr_t)&ahc->free_scbs); @@ -2998,7 +3128,7 @@ ahc_timeout(arg) } /* * No active target or a paged out SCB. - * Try reseting the bus. + * Try resetting the bus. */ channel = (scb->tcl & SELBUSB) ? 'B': 'A'; found = ahc_reset_channel(ahc, channel, scb->tag, diff --git a/sys/dev/ic/aic7xxxreg.h b/sys/dev/ic/aic7xxxreg.h index 1b52c8bcb59..8f9751421bf 100644 --- a/sys/dev/ic/aic7xxxreg.h +++ b/sys/dev/ic/aic7xxxreg.h @@ -1,4 +1,4 @@ -/* $OpenBSD: aic7xxxreg.h,v 1.4 1996/11/28 23:27:45 niklas Exp $ */ +/* $OpenBSD: aic7xxxreg.h,v 1.5 1997/04/10 22:52:19 deraadt Exp $ */ /* $NetBSD: aic7xxxreg.h,v 1.4 1996/10/08 03:04:04 gibbs Exp $ */ /* * Aic7xxx register and scratch ram definitions. @@ -34,7 +34,7 @@ /* * This header is shared by the sequencer code and the kernel level driver. * - * All page numbers refer to the Adaptec AIC-7770 Data Book availible from + * All page numbers refer to the Adaptec AIC-7770 Data Book available from * Adaptec's Technical Documents Department 1-800-934-2766 */ @@ -104,7 +104,7 @@ #define P_STATUS 0xc0 #define P_MESGIN 0xe0 /* - * SCSI Contol Signal Write Register (p. 3-16). + * SCSI Control Signal Write Register (p. 3-16). * Writing to this register modifies the control signals on the bus. Only * those signals that are allowed in the current mode (Initiator/Target) are * asserted. @@ -142,18 +142,18 @@ /* * SCSI Latched Data (p. 3-19). - * Read/Write latchs used to transfer data on the SCSI bus during + * Read/Write latches used to transfer data on the SCSI bus during * Automatic or Manual PIO mode. SCSIDATH can be used for the - * upper byte of a 16bit wide asyncronouse data phase transfer. + * upper byte of a 16bit wide asynchronous data phase transfer. */ #define SCSIDATL 0x006 #define SCSIDATH 0x007 /* * SCSI Transfer Count (pp. 3-19,20) - * These registers count down the number of bytes transfered + * These registers count down the number of bytes transferred * across the SCSI bus. The counter is decremented only once - * the data has been safely transfered. SDONE in SSTAT0 is + * the data has been safely transferred. SDONE in SSTAT0 is * set when STCNT goes to 0 */ #define STCNT 0x008 @@ -244,7 +244,7 @@ * transfered on the SCSI bus. They are counted up in the same * manner as STCNT is counted down. SHADDR should always be used * to determine the address of the last byte transfered since HADDR - * can be squewed by write ahead. + * can be skewed by write-ahead. */ #define SHADDR 0x014 #define SHADDR0 0x014 @@ -329,7 +329,7 @@ /* * Host Address (p. 3-48) * This register contains the address of the byte about - * to be transfered across the host bus. + * to be transferred across the host bus. */ #define HADDR 0x088 #define HADDR0 0x088 @@ -384,7 +384,7 @@ /* * Host Control (p. 3-47) R/W - * Overal host control of the device. + * Overall host control of the device. */ #define HCNTRL 0x087 /* UNUSED 0x80 */ @@ -520,7 +520,7 @@ * The two reserved bytes at SCBARRAY+1[23] are expected to be set to * zero. Bit 3 in SCBARRAY+0 is used as an internal flag to indicate * whether or not to DMA an SCB from host ram. This flag prevents the - * "re-fetching" of transactions that are requed because the target is + * "re-fetching" of transactions that are requeued because the target is * busy with another command. We also use bits 6 & 7 to indicate whether * or not to initiate SDTR or WDTR repectively when starting this command. */ @@ -643,7 +643,7 @@ #define TARG_SCRATCH 0x020 /* - * The sequencer will stick the frist byte of any rejected message here so + * The sequencer will stick the first byte of any rejected message here so * we can see what is getting thrown away. Extended messages put the * extended message type in REJBYTE_EXT. */ @@ -702,7 +702,7 @@ * this card. */ #define COMP_SCBCOUNT 0x048 /* - * Two's compliment of SCBCOUNT + * Two's complement of SCBCOUNT */ #define QCNTMASK 0x049 /* * Mask of bits to test against diff --git a/sys/dev/ic/aic7xxxvar.h b/sys/dev/ic/aic7xxxvar.h index db633e76489..d2c4c50d4b2 100644 --- a/sys/dev/ic/aic7xxxvar.h +++ b/sys/dev/ic/aic7xxxvar.h @@ -1,4 +1,4 @@ -/* $OpenBSD: aic7xxxvar.h,v 1.9 1996/11/28 23:27:45 niklas Exp $ */ +/* $OpenBSD: aic7xxxvar.h,v 1.10 1997/04/10 22:52:20 deraadt Exp $ */ /* $NetBSD: aic7xxxvar.h,v 1.10 1996/10/21 22:34:09 thorpej Exp $ */ /* * Interface to the generic driver for the aic7xxx based adaptec @@ -70,13 +70,13 @@ #define AHC_INB(ahc, port) \ bus_space_read_1((ahc)->sc_iot, (ahc)->sc_ioh, port) #define AHC_INSB(ahc, port, valp, size) \ - bus_space_read_multi_1((ahc)->sc_iot, (ahc)->sc_ioh, port, valp, size) + bus_space_read_multi_1((ahc)->sc_iot, (ahc)->sc_ioh, port, (u_int8_t *) valp, size) #define AHC_OUTB(ahc, port, val) \ bus_space_write_1((ahc)->sc_iot, (ahc)->sc_ioh, port, val) #define AHC_OUTSB(ahc, port, valp, size) \ - bus_space_write_multi_1((ahc)->sc_iot, (ahc)->sc_ioh, port, valp, size) + bus_space_write_multi_1((ahc)->sc_iot, (ahc)->sc_ioh, port, (u_int8_t *) valp, size) #define AHC_OUTSL(ahc, port, valp, size) \ - bus_space_write_multi_4((ahc)->sc_iot, (ahc)->sc_ioh, port, valp, size) + bus_space_write_multi_4((ahc)->sc_iot, (ahc)->sc_ioh, port, (u_int32_t *) valp, size) #endif #define AHC_NSEG 256 /* number of dma segments supported */ @@ -199,7 +199,7 @@ struct scb { struct scsi_xfer *xs; /* the scsi_xfer for this cmd */ scb_flag flags; u_char position; /* Position in card's scbarray */ - struct ahc_dma_seg ahc_dma[AHC_NSEG] __attribute__ ((packed)); + struct ahc_dma_seg ahc_dma[AHC_NSEG]; struct scsi_sense sense_cmd; /* SCSI command block */ }; @@ -211,6 +211,8 @@ struct ahc_data { void *sc_ih; bus_space_tag_t sc_iot; bus_space_handle_t sc_ioh; + LIST_HEAD(, scsi_xfer) sc_xxxq; /* XXX software request queue */ + struct scsi_xfer *sc_xxxqlast; /* last entry in queue */ #endif ahc_type type; ahc_flag flags; |